Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 01/03/2018, à 18:01

ggedeon

[Résolu] problème affichage qui se ''brouille'' xubuntu

bonjour,
j'ai un problème depuis mon rechargement de système xubuntu 16.04 récent
ma carte graphique Nvidia Geforce 6150 SE
j'ai bien mis à jour les pilotes additionnels en sélectionnant ''Nvidia''
tout semble fonctionner sauf que par moment l'affichage se brouille et devient illisible.

je n'ai pas trouvé de fichier xorg.conf dans etc/X11
mais un fichier xorg.conf.failsafe le voici

gerard@gerard-M61PME-S2:/etc/X11$ cat xorg.conf.failsafe
Section "Device"
	Identifier	"Configured Video Device"
	Driver		"vesa"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection
gerard@gerard-M61PME-S2:/etc/X11$ 

voici un fichier Xorg.0.log =>

1PME-S2:/var/log$ cat Xorg.0.log
[    23.143] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[    23.143] X Protocol Version 11, Revision 0
[    23.143] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[    23.143] Current Operating System: Linux gerard-M61PME-S2 4.13.0-36-generic #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 x86_64
[    23.143] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=759079f0-96ce-46f2-824f-7030843706ca ro quiet splash
[    23.143] Build Date: 24 November 2017  09:44:25AM
[    23.143] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support) 
[    23.143] Current version of pixman: 0.33.6
[    23.143] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    23.144] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.144] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar  1 17:44:13 2018
[    23.197] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.225] (==) No Layout section.  Using the first Screen section.
[    23.225] (==) No screen section available. Using defaults.
[    23.225] (**) |-->Screen "Default Screen Section" (0)
[    23.225] (**) |   |-->Monitor "<default monitor>"
[    23.225] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    23.225] (==) Automatically adding devices
[    23.225] (==) Automatically enabling devices
[    23.225] (==) Automatically adding GPU devices
[    23.225] (==) Automatically binding GPU devices
[    23.226] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    23.226] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.226] 	Entry deleted from font path.
[    23.226] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    23.226] 	Entry deleted from font path.
[    23.226] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    23.226] 	Entry deleted from font path.
[    23.226] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    23.226] 	Entry deleted from font path.
[    23.226] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    23.226] 	Entry deleted from font path.
[    23.226] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    23.226] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    23.226] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.226] (II) Loader magic: 0x563013f7be00
[    23.226] (II) Module ABI versions:
[    23.226] 	X.Org ANSI C Emulation: 0.4
[    23.226] 	X.Org Video Driver: 23.0
[    23.226] 	X.Org XInput driver : 24.1
[    23.226] 	X.Org Server Extension : 10.0
[    23.227] (++) using VT number 7

[    23.227] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    23.227] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.228] (--) PCI:*(0:0:13:0) 10de:03d0:1458:d000 rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
[    23.228] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    23.228] (II) "glx" will be loaded by default.
[    23.228] (II) LoadModule: "glx"
[    23.228] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    26.905] (II) Module glx: vendor="NVIDIA Corporation"
[    26.905] 	compiled for 4.0.2, module version = 1.0.0
[    26.905] 	Module class: X.Org Server Extension
[    26.905] (II) NVIDIA GLX Module  304.135  Tue Jan 17 15:46:50 PST 2017
[    26.905] (==) Matched nvidia as autoconfigured driver 0
[    26.905] (==) Matched nouveau as autoconfigured driver 1
[    26.905] (==) Matched nvidia as autoconfigured driver 2
[    26.905] (==) Matched nouveau as autoconfigured driver 3
[    26.905] (==) Matched modesetting as autoconfigured driver 4
[    26.905] (==) Matched fbdev as autoconfigured driver 5
[    26.905] (==) Matched vesa as autoconfigured driver 6
[    26.905] (==) Assigned the driver to the xf86ConfigLayout
[    26.906] (II) LoadModule: "nvidia"
[    26.906] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    26.971] (II) Module nvidia: vendor="NVIDIA Corporation"
[    26.971] 	compiled for 4.0.2, module version = 1.0.0
[    26.971] 	Module class: X.Org Video Driver
[    26.971] (II) LoadModule: "nouveau"
[    26.996] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    27.064] (II) Module nouveau: vendor="X.Org Foundation"
[    27.064] 	compiled for 1.19.5, module version = 1.0.15
[    27.064] 	Module class: X.Org Video Driver
[    27.064] 	ABI class: X.Org Video Driver, version 23.0
[    27.064] (II) LoadModule: "modesetting"
[    27.065] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    27.065] (II) Module modesetting: vendor="X.Org Foundation"
[    27.065] 	compiled for 1.19.5, module version = 1.19.5
[    27.065] 	Module class: X.Org Video Driver
[    27.065] 	ABI class: X.Org Video Driver, version 23.0
[    27.065] (II) LoadModule: "fbdev"
[    27.065] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    27.065] (II) Module fbdev: vendor="X.Org Foundation"
[    27.065] 	compiled for 1.19.3, module version = 0.4.4
[    27.065] 	Module class: X.Org Video Driver
[    27.065] 	ABI class: X.Org Video Driver, version 23.0
[    27.065] (II) LoadModule: "vesa"
[    27.065] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    27.065] (II) Module vesa: vendor="X.Org Foundation"
[    27.066] 	compiled for 1.19.3, module version = 2.3.4
[    27.066] 	Module class: X.Org Video Driver
[    27.066] 	ABI class: X.Org Video Driver, version 23.0
[    27.066] (II) NVIDIA dlloader X Driver  304.135  Tue Jan 17 15:28:00 PST 2017
[    27.066] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    27.066] (II) NOUVEAU driver Date:   Fri Apr 21 14:41:17 2017 -0400
[    27.066] (II) NOUVEAU driver for NVIDIA chipset families :
[    27.066] 	RIVA TNT        (NV04)
[    27.066] 	RIVA TNT2       (NV05)
[    27.066] 	GeForce 256     (NV10)
[    27.066] 	GeForce 2       (NV11, NV15)
[    27.066] 	GeForce 4MX     (NV17, NV18)
[    27.066] 	GeForce 3       (NV20)
[    27.066] 	GeForce 4Ti     (NV25, NV28)
[    27.066] 	GeForce FX      (NV3x)
[    27.066] 	GeForce 6       (NV4x)
[    27.066] 	GeForce 7       (G7x)
[    27.066] 	GeForce 8       (G8x)
[    27.066] 	GeForce GTX 200 (NVA0)
[    27.066] 	GeForce GTX 400 (NVC0)
[    27.066] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    27.066] (II) FBDEV: driver for framebuffer: fbdev
[    27.066] (II) VESA: driver for VESA chipsets: vesa
[    27.075] (II) Loading sub module "fb"
[    27.075] (II) LoadModule: "fb"
[    27.075] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.075] (II) Module fb: vendor="X.Org Foundation"
[    27.075] 	compiled for 1.19.5, module version = 1.0.0
[    27.075] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    27.075] (II) Loading sub module "wfb"
[    27.075] (II) LoadModule: "wfb"
[    27.075] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    27.076] (II) Module wfb: vendor="X.Org Foundation"
[    27.076] 	compiled for 1.19.5, module version = 1.0.0
[    27.076] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    27.076] (II) Loading sub module "ramdac"
[    27.076] (II) LoadModule: "ramdac"
[    27.076] (II) Module "ramdac" already built-in
[    27.076] (WW) Falling back to old probe method for modesetting
[    27.076] (WW) Falling back to old probe method for fbdev
[    27.076] (II) Loading sub module "fbdevhw"
[    27.076] (II) LoadModule: "fbdevhw"
[    27.076] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    27.076] (II) Module fbdevhw: vendor="X.Org Foundation"
[    27.076] 	compiled for 1.19.5, module version = 0.0.2
[    27.076] 	ABI class: X.Org Video Driver, version 23.0
[    27.076] (EE) open /dev/fb0: No such file or directory
[    27.076] (WW) Falling back to old probe method for vesa
[    27.077] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    27.077] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    27.077] (==) NVIDIA(0): RGB weight 888
[    27.077] (==) NVIDIA(0): Default visual is TrueColor
[    27.077] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    27.077] (**) NVIDIA(0): Enabling 2D acceleration
[    27.698] (II) NVIDIA(GPU-0): Display (Hitachi/HINT N220W D-sub (CRT-0)) does not support
[    27.698] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    27.699] (II) NVIDIA(0): NVIDIA GPU GeForce 6150SE nForce 430 (C61) at PCI:0:13:0
[    27.699] (II) NVIDIA(0):     (GPU-0)
[    27.699] (--) NVIDIA(0): Memory: 262144 kBytes
[    27.699] (--) NVIDIA(0): VideoBIOS: 05.61.32.19.04
[    27.699] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    27.699] (--) NVIDIA(0): Valid display device(s) on GeForce 6150SE nForce 430 at PCI:0:13:0
[    27.699] (--) NVIDIA(0):     Hitachi/HINT N220W D-sub (CRT-0) (connected)
[    27.699] (--) NVIDIA(0): Hitachi/HINT N220W D-sub (CRT-0): 350.0 MHz maximum pixel clock
[    27.699] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    27.699] (**) NVIDIA(0):     device Hitachi/HINT N220W D-sub (CRT-0) (Using EDID
[    27.699] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    27.699] (==) NVIDIA(0): 
[    27.699] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    27.699] (==) NVIDIA(0):     will be used as the requested mode.
[    27.699] (==) NVIDIA(0): 
[    27.700] (II) NVIDIA(0): Validated MetaModes:
[    27.700] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    27.700] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[    27.701] (WW) NVIDIA(0): Unable to support custom viewPortOut 1680 x 945 +0 +52
[    27.701] (WW) NVIDIA(0): Unable to support custom viewPortOut 1680 x 945 +0 +52
[    27.701] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[    27.701] (--) NVIDIA(0):     option
[    27.701] (II) UnloadModule: "nouveau"
[    27.701] (II) Unloading nouveau
[    27.702] (II) UnloadModule: "modesetting"
[    27.702] (II) Unloading modesetting
[    27.702] (II) UnloadModule: "fbdev"
[    27.702] (II) Unloading fbdev
[    27.702] (II) UnloadSubModule: "fbdevhw"
[    27.702] (II) Unloading fbdevhw
[    27.702] (II) UnloadModule: "vesa"
[    27.702] (II) Unloading vesa
[    27.702] (--) Depth 24 pixmap format is 32 bpp
[    27.707] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    27.867] (==) NVIDIA(0): Disabling shared memory pixmaps
[    27.867] (==) NVIDIA(0): Backing store enabled
[    27.867] (==) NVIDIA(0): Silken mouse enabled
[    27.872] (==) NVIDIA(0): DPMS enabled
[    27.873] (II) Loading sub module "dri2"
[    27.873] (II) LoadModule: "dri2"
[    27.873] (II) Module "dri2" already built-in
[    27.873] (II) NVIDIA(0): [DRI2] Setup complete
[    27.873] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    27.873] (--) RandR disabled
[    27.889] (II) SELinux: Disabled on system
[    27.921] (II) Initializing extension GLX
[    27.921] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event1)
[    28.286] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.286] (II) LoadModule: "evdev"
[    28.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.345] (II) Module evdev: vendor="X.Org Foundation"
[    28.345] 	compiled for 1.19.3, module version = 2.10.5
[    28.345] 	Module class: X.Org XInput Driver
[    28.345] 	ABI class: X.Org XInput driver, version 24.1
[    28.345] (II) Using input driver 'evdev' for 'Power Button'
[    28.345] (**) Power Button: always reports core events
[    28.345] (**) evdev: Power Button: Device: "/dev/input/event1"
[    28.345] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.345] (--) evdev: Power Button: Found keys
[    28.345] (II) evdev: Power Button: Configuring as keyboard
[    28.345] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    28.345] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.345] (**) Option "xkb_rules" "evdev"
[    28.345] (**) Option "xkb_model" "pc105"
[    28.345] (**) Option "xkb_layout" "fr"
[    28.345] (**) Option "xkb_variant" "latin9"
[    28.389] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    28.389] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.389] (II) Using input driver 'evdev' for 'Power Button'
[    28.389] (**) Power Button: always reports core events
[    28.389] (**) evdev: Power Button: Device: "/dev/input/event0"
[    28.389] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.389] (--) evdev: Power Button: Found keys
[    28.389] (II) evdev: Power Button: Configuring as keyboard
[    28.389] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    28.389] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    28.389] (**) Option "xkb_rules" "evdev"
[    28.389] (**) Option "xkb_model" "pc105"
[    28.389] (**) Option "xkb_layout" "fr"
[    28.390] (**) Option "xkb_variant" "latin9"
[    28.391] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3)
[    28.391] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    28.391] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    28.391] (**) Logitech USB Optical Mouse: always reports core events
[    28.391] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event3"
[    28.448] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc018
[    28.448] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[    28.448] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    28.448] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    28.448] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    28.448] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    28.448] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    28.448] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    28.448] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.448] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:046D:C018.0001/input/input3/event3"
[    28.448] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[    28.448] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    28.448] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    28.448] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    28.448] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    28.448] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    28.449] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    28.449] (II) No input driver specified, ignoring this device.
[    28.449] (II) This device may have been added with another device file.
[    28.450] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event4)
[    28.450] (II) No input driver specified, ignoring this device.
[    28.450] (II) This device may have been added with another device file.
[    28.450] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event5)
[    28.450] (II) No input driver specified, ignoring this device.
[    28.450] (II) This device may have been added with another device file.
[    28.450] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[    28.450] (II) No input driver specified, ignoring this device.
[    28.450] (II) This device may have been added with another device file.
[    28.451] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event7)
[    28.451] (II) No input driver specified, ignoring this device.
[    28.451] (II) This device may have been added with another device file.
[    28.451] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event8)
[    28.451] (II) No input driver specified, ignoring this device.
[    28.451] (II) This device may have been added with another device file.
[    28.452] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    28.452] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    28.452] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    28.452] (**) AT Translated Set 2 keyboard: always reports core events
[    28.452] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    28.452] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    28.452] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    28.452] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    28.452] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    28.452] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    28.452] (**) Option "xkb_rules" "evdev"
[    28.452] (**) Option "xkb_model" "pc105"
[    28.452] (**) Option "xkb_layout" "fr"
[    28.452] (**) Option "xkb_variant" "latin9"
[    32.161] (II) NVIDIA(GPU-0): Display (Hitachi/HINT N220W D-sub (CRT-0)) does not support
[    32.161] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    32.161] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.162] (**) NVIDIA(0):     device Hitachi/HINT N220W D-sub (CRT-0) (Using EDID
[    32.162] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    34.231] (II) NVIDIA(GPU-0): Display (Hitachi/HINT N220W D-sub (CRT-0)) does not support
[    34.231] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    34.231] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    34.231] (**) NVIDIA(0):     device Hitachi/HINT N220W D-sub (CRT-0) (Using EDID
[    34.231] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    35.290] (II) NVIDIA(GPU-0): Display (Hitachi/HINT N220W D-sub (CRT-0)) does not support
[    35.290] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    35.290] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    35.290] (**) NVIDIA(0):     device Hitachi/HINT N220W D-sub (CRT-0) (Using EDID
[    35.290] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)

j'ai aussi trouvé un fichier Xorg.faisafe.log =>

gerard@gerard-M61PME-S2:/var/log$ cat Xorg.failsafe.log
[    76.516] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[    76.517] X Protocol Version 11, Revision 0
[    76.517] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[    76.517] Current Operating System: Linux gerard-M61PME-S2 4.13.0-36-generic #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 x86_64
[    76.517] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=759079f0-96ce-46f2-824f-7030843706ca ro recovery nomodeset
[    76.517] Build Date: 24 November 2017  09:44:25AM
[    76.517] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support) 
[    76.517] Current version of pixman: 0.33.6
[    76.518] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    76.518] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    76.519] (++) Log file: "/var/log/Xorg.failsafe.log", Time: Tue Feb 27 16:56:03 2018
[    76.526] (++) Using config file: "/etc/X11/xorg.conf.failsafe"
[    76.526] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    76.551] (==) No Layout section.  Using the first Screen section.
[    76.551] (**) |-->Screen "Default Screen" (0)
[    76.551] (**) |   |-->Monitor "Configured Monitor"
[    76.551] (**) |   |-->Device "Configured Video Device"
[    76.552] (==) Automatically adding devices
[    76.552] (==) Automatically enabling devices
[    76.552] (==) Automatically adding GPU devices
[    76.552] (==) Automatically binding GPU devices
[    76.552] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    76.552] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    76.552] 	Entry deleted from font path.
[    76.552] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    76.552] 	Entry deleted from font path.
[    76.552] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    76.552] 	Entry deleted from font path.
[    76.552] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    76.552] 	Entry deleted from font path.
[    76.552] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    76.552] 	Entry deleted from font path.
[    76.552] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    76.552] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    76.552] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    76.552] (II) Loader magic: 0x55eec8a33e00
[    76.552] (II) Module ABI versions:
[    76.552] 	X.Org ANSI C Emulation: 0.4
[    76.552] 	X.Org Video Driver: 23.0
[    76.552] 	X.Org XInput driver : 24.1
[    76.552] 	X.Org Server Extension : 10.0
[    76.552] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[    76.552] (--) using VT number 2

[    76.552] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    76.552] (II) xfree86: Adding drm device (/dev/dri/card0)
[    76.553] (--) PCI:*(0:0:13:0) 10de:03d0:1458:d000 rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
[    76.553] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    76.553] (II) "glx" will be loaded by default.
[    76.553] (II) LoadModule: "glx"
[    76.748] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    79.790] (II) Module glx: vendor="NVIDIA Corporation"
[    79.790] 	compiled for 4.0.2, module version = 1.0.0
[    79.790] 	Module class: X.Org Server Extension
[    79.790] (II) NVIDIA GLX Module  304.135  Tue Jan 17 15:46:50 PST 2017
[    79.790] (II) LoadModule: "vesa"
[    79.790] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    79.791] (II) Module vesa: vendor="X.Org Foundation"
[    79.791] 	compiled for 1.19.3, module version = 2.3.4
[    79.791] 	Module class: X.Org Video Driver
[    79.791] 	ABI class: X.Org Video Driver, version 23.0
[    79.791] (II) VESA: driver for VESA chipsets: vesa
[    79.798] vesa: Ignoring device with a bound kernel driver
[    79.798] (WW) Falling back to old probe method for vesa
[    79.798] (EE) Screen 0 deleted because of no matching config section.
[    79.798] (II) UnloadModule: "vesa"
[    79.798] (EE) Device(s) detected, but none match those in the config file.
[    79.798] (==) Matched nvidia as autoconfigured driver 0
[    79.798] (==) Matched nouveau as autoconfigured driver 1
[    79.798] (==) Matched nvidia as autoconfigured driver 2
[    79.798] (==) Matched nouveau as autoconfigured driver 3
[    79.798] (==) Matched modesetting as autoconfigured driver 4
[    79.798] (==) Matched fbdev as autoconfigured driver 5
[    79.798] (==) Matched vesa as autoconfigured driver 6
[    79.798] (==) Assigned the driver to the xf86ConfigLayout
[    79.798] (II) LoadModule: "nvidia"
[    79.798] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    79.940] (II) Module nvidia: vendor="NVIDIA Corporation"
[    79.940] 	compiled for 4.0.2, module version = 1.0.0
[    79.940] 	Module class: X.Org Video Driver
[    79.944] (II) LoadModule: "nouveau"
[    79.944] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    79.957] (II) Module nouveau: vendor="X.Org Foundation"
[    79.957] 	compiled for 1.19.5, module version = 1.0.15
[    79.957] 	Module class: X.Org Video Driver
[    79.957] 	ABI class: X.Org Video Driver, version 23.0
[    79.957] (II) LoadModule: "modesetting"
[    79.957] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    79.958] (II) Module modesetting: vendor="X.Org Foundation"
[    79.958] 	compiled for 1.19.5, module version = 1.19.5
[    79.958] 	Module class: X.Org Video Driver
[    79.958] 	ABI class: X.Org Video Driver, version 23.0
[    79.958] (II) LoadModule: "fbdev"
[    79.958] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    79.958] (II) Module fbdev: vendor="X.Org Foundation"
[    79.958] 	compiled for 1.19.3, module version = 0.4.4
[    79.958] 	Module class: X.Org Video Driver
[    79.958] 	ABI class: X.Org Video Driver, version 23.0
[    79.958] (II) LoadModule: "vesa"
[    79.958] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    79.958] (II) Module vesa: vendor="X.Org Foundation"
[    79.958] 	compiled for 1.19.3, module version = 2.3.4
[    79.958] 	Module class: X.Org Video Driver
[    79.958] 	ABI class: X.Org Video Driver, version 23.0
[    79.958] (II) UnloadModule: "vesa"
[    79.958] (II) Unloading vesa
[    79.958] (II) Failed to load module "vesa" (already loaded, 21998)
[    79.958] (II) VESA: driver for VESA chipsets: vesa
[    79.958] (II) NVIDIA dlloader X Driver  304.135  Tue Jan 17 15:28:00 PST 2017
[    79.958] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    79.959] (II) NOUVEAU driver Date:   Fri Apr 21 14:41:17 2017 -0400
[    79.959] (II) NOUVEAU driver for NVIDIA chipset families :
[    79.959] 	RIVA TNT        (NV04)
[    79.959] 	RIVA TNT2       (NV05)
[    79.959] 	GeForce 256     (NV10)
[    79.959] 	GeForce 2       (NV11, NV15)
[    79.959] 	GeForce 4MX     (NV17, NV18)
[    79.959] 	GeForce 3       (NV20)
[    79.959] 	GeForce 4Ti     (NV25, NV28)
[    79.959] 	GeForce FX      (NV3x)
[    79.959] 	GeForce 6       (NV4x)
[    79.959] 	GeForce 7       (G7x)
[    79.959] 	GeForce 8       (G8x)
[    79.959] 	GeForce GTX 200 (NVA0)
[    79.959] 	GeForce GTX 400 (NVC0)
[    79.959] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    79.959] (II) FBDEV: driver for framebuffer: fbdev
[    79.959] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    79.959] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[    79.960] vesa: Ignoring device with a bound kernel driver
[    79.960] (WW) Falling back to old probe method for vesa
[    79.961] (II) Loading sub module "fb"
[    79.961] (II) LoadModule: "fb"
[    79.961] (II) Loading /usr/lib/xorg/modules/libfb.so
[    79.961] (II) Module fb: vendor="X.Org Foundation"
[    79.961] 	compiled for 1.19.5, module version = 1.0.0
[    79.961] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    79.961] (II) Loading sub module "wfb"
[    79.961] (II) LoadModule: "wfb"
[    79.961] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    79.976] (II) Module wfb: vendor="X.Org Foundation"
[    79.976] 	compiled for 1.19.5, module version = 1.0.0
[    79.976] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    79.976] (II) Loading sub module "ramdac"
[    79.976] (II) LoadModule: "ramdac"
[    79.976] (II) Module "ramdac" already built-in
[    79.999] (WW) Falling back to old probe method for modesetting
[    79.999] (WW) Falling back to old probe method for fbdev
[    79.999] (II) Loading sub module "fbdevhw"
[    79.999] (II) LoadModule: "fbdevhw"
[    79.999] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    79.999] (II) Module fbdevhw: vendor="X.Org Foundation"
[    79.999] 	compiled for 1.19.5, module version = 0.0.2
[    79.999] 	ABI class: X.Org Video Driver, version 23.0
[    79.999] (EE) open /dev/fb0: No such file or directory
[    79.999] (EE) Screen 0 deleted because of no matching config section.
[    79.999] (II) UnloadModule: "vesa"
[    79.999] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
[    79.999] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    79.999] (==) NVIDIA(0): RGB weight 888
[    79.999] (==) NVIDIA(0): Default visual is TrueColor
[    79.999] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    80.000] (**) NVIDIA(0): Enabling 2D acceleration
[    80.557] (II) NVIDIA(GPU-0): Display (Hitachi/HINT N220W D-sub (CRT-0)) does not support
[    80.557] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    80.571] (II) NVIDIA(0): NVIDIA GPU GeForce 6150SE nForce 430 (C61) at PCI:0:13:0
[    80.571] (II) NVIDIA(0):     (GPU-0)
[    80.571] (--) NVIDIA(0): Memory: 262144 kBytes
[    80.571] (--) NVIDIA(0): VideoBIOS: 05.61.32.19.04
[    80.571] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    80.571] (--) NVIDIA(0): Valid display device(s) on GeForce 6150SE nForce 430 at PCI:0:13:0
[    80.571] (--) NVIDIA(0):     Hitachi/HINT N220W D-sub (CRT-0) (connected)
[    80.571] (--) NVIDIA(0): Hitachi/HINT N220W D-sub (CRT-0): 350.0 MHz maximum pixel clock
[    80.571] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    80.571] (**) NVIDIA(0):     device Hitachi/HINT N220W D-sub (CRT-0) (Using EDID
[    80.571] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    80.572] (==) NVIDIA(0): 
[    80.572] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    80.572] (==) NVIDIA(0):     will be used as the requested mode.
[    80.572] (==) NVIDIA(0): 
[    80.572] (II) NVIDIA(0): Validated MetaModes:
[    80.572] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    80.572] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[    80.573] (WW) NVIDIA(0): Unable to support custom viewPortOut 1680 x 945 +0 +52
[    80.584] (WW) NVIDIA(0): Unable to support custom viewPortOut 1680 x 945 +0 +52
[    80.584] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[    80.584] (--) NVIDIA(0):     option
[    80.584] (II) UnloadModule: "nouveau"
[    80.585] (II) Unloading nouveau
[    80.585] (II) UnloadModule: "modesetting"
[    80.585] (II) Unloading modesetting
[    80.585] (II) UnloadModule: "fbdev"
[    80.585] (II) Unloading fbdev
[    80.585] (II) UnloadSubModule: "fbdevhw"
[    80.585] (II) Unloading fbdevhw
[    80.585] (--) Depth 24 pixmap format is 32 bpp
[    80.589] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    80.589] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    80.589] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    80.589] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    80.589] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    80.589] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    80.589] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    80.589] (II) NVIDIA(0):     Config Options in the README.
[    80.589] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    80.734] (==) NVIDIA(0): Disabling shared memory pixmaps
[    80.734] (==) NVIDIA(0): Backing store enabled
[    80.734] (==) NVIDIA(0): Silken mouse enabled
[    80.735] (==) NVIDIA(0): DPMS enabled
[    80.735] (II) Loading sub module "dri2"
[    80.735] (II) LoadModule: "dri2"
[    80.735] (II) Module "dri2" already built-in
[    80.735] (II) NVIDIA(0): [DRI2] Setup complete
[    80.736] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    80.736] (--) RandR disabled
[    80.748] (II) SELinux: Disabled on system
[    80.749] (II) Initializing extension GLX
[    80.749] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event1)
[    80.955] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    80.955] (II) LoadModule: "evdev"
[    80.955] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    80.983] (II) Module evdev: vendor="X.Org Foundation"
[    80.983] 	compiled for 1.19.3, module version = 2.10.5
[    80.984] 	Module class: X.Org XInput Driver
[    80.984] 	ABI class: X.Org XInput driver, version 24.1
[    80.984] (II) Using input driver 'evdev' for 'Power Button'
[    80.984] (**) Power Button: always reports core events
[    80.984] (**) evdev: Power Button: Device: "/dev/input/event1"
[    80.984] (--) evdev: Power Button: Vendor 0 Product 0x1
[    80.984] (--) evdev: Power Button: Found keys
[    80.984] (II) evdev: Power Button: Configuring as keyboard
[    80.984] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    80.984] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    80.984] (**) Option "xkb_rules" "evdev"
[    80.984] (**) Option "xkb_model" "pc105"
[    80.984] (**) Option "xkb_layout" "fr"
[    80.984] (**) Option "xkb_variant" "latin9"
[    81.018] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    81.018] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    81.018] (II) Using input driver 'evdev' for 'Power Button'
[    81.018] (**) Power Button: always reports core events
[    81.018] (**) evdev: Power Button: Device: "/dev/input/event0"
[    81.018] (--) evdev: Power Button: Vendor 0 Product 0x1
[    81.018] (--) evdev: Power Button: Found keys
[    81.018] (II) evdev: Power Button: Configuring as keyboard
[    81.019] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    81.019] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    81.019] (**) Option "xkb_rules" "evdev"
[    81.019] (**) Option "xkb_model" "pc105"
[    81.019] (**) Option "xkb_layout" "fr"
[    81.019] (**) Option "xkb_variant" "latin9"
[    81.020] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3)
[    81.020] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    81.020] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    81.020] (**) Logitech USB Optical Mouse: always reports core events
[    81.020] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event3"
[    81.080] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc018
[    81.080] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[    81.080] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    81.080] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    81.080] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    81.080] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    81.080] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    81.080] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    81.080] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    81.080] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:046D:C018.0001/input/input3/event3"
[    81.080] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[    81.081] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    81.081] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    81.081] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    81.081] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    81.081] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    81.082] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    81.082] (II) No input driver specified, ignoring this device.
[    81.082] (II) This device may have been added with another device file.
[    81.082] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event4)
[    81.082] (II) No input driver specified, ignoring this device.
[    81.082] (II) This device may have been added with another device file.
[    81.082] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event5)
[    81.082] (II) No input driver specified, ignoring this device.
[    81.082] (II) This device may have been added with another device file.
[    81.083] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[    81.083] (II) No input driver specified, ignoring this device.
[    81.083] (II) This device may have been added with another device file.
[    81.083] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event7)
[    81.083] (II) No input driver specified, ignoring this device.
[    81.083] (II) This device may have been added with another device file.
[    81.084] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event8)
[    81.084] (II) No input driver specified, ignoring this device.
[    81.084] (II) This device may have been added with another device file.
[    81.084] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    81.084] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    81.084] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    81.084] (**) AT Translated Set 2 keyboard: always reports core events
[    81.084] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    81.084] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    81.084] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    81.084] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    81.084] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    81.084] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    81.084] (**) Option "xkb_rules" "evdev"
[    81.084] (**) Option "xkb_model" "pc105"
[    81.084] (**) Option "xkb_layout" "fr"
[    81.084] (**) Option "xkb_variant" "latin9"
[    81.092] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[    81.094] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:0d.0/drm/card0 /dev/dri/card0
[    81.094] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:0d.0/drm/card0
[    81.094] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event7)
[    81.094] (II) No input driver specified, ignoring this device.
[    81.094] (II) This device may have been added with another device file.
[    81.095] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event8)
[    81.095] (II) No input driver specified, ignoring this device.
[    81.095] (II) This device may have been added with another device file.
[    81.095] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[    81.095] (II) No input driver specified, ignoring this device.
[    81.095] (II) This device may have been added with another device file.
[    81.095] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event5)
[    81.095] (II) No input driver specified, ignoring this device.
[    81.095] (II) This device may have been added with another device file.
[    81.096] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event4)
[    81.096] (II) No input driver specified, ignoring this device.
[    81.096] (II) This device may have been added with another device file.
[    91.092] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   101.096] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   111.096] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   121.098] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   131.107] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   141.107] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   151.107] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   161.109] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   171.119] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   181.129] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   191.139] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
gerard@gerard-M61PME-S2:/var/log$ B

Auriez vous quelques pistes pour résoudre mon problème ?

depuis que j'ai posté ce pb ça s'est produit à nouveau après une utilisation d'environ 1 heure
et au redémarrage du système (j'arrive à repérer le bouton éteindre et redémarrer)
et j'ai eu après redémarrage affichage d'une fenêtre avec :

l'application Ibus Préférences a quitté de façon inattendue

avec en détail

/usr/lib/ibus/ibus-x-11

toujours pour le même problème : fonctionnement normal quelquefois pendant 1 heure puis l'affichage de l'écran se brouille cependant le système fonctionne toujours.
je cherche un peu partout et je viens de constater que je n'ai pas de fichier "xorg.conf" dans etc/X11 mais un fichier xorg.conf.failsafe dont voici le contenu :

gerard@gerard-M61PME-S2:/etc/X11$ cat xorg.conf.failsafe
Section "Device"
	Identifier	"Configured Video Device"
	Driver		"vesa"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection
gerard@gerard-M61PME-S2:/etc/X11$ 

aut-il regénérer un fichier xorg.conf au moyen de la commande "sudo nvidia-xconfig" ?

merci de vos réponses...

Dernière modification par ggedeon (Le 14/03/2018, à 10:50)


1) ASUSPRO S340MF  Intel® Core™ i3-9100 CPU @ 3.60GHz × 4  carte Mesa Intel® UHD Graphics 630 (CFL GT2)
systèmes :  Ubuntu 20.04.2
2) ASUS X55W8 Intel Pentium 2020 RAM DDR3 4 Go - Intel HD - Ubuntu 20.04.02

Hors ligne

#2 Le 14/03/2018, à 10:49

ggedeon

Re : [Résolu] problème affichage qui se ''brouille'' xubuntu

Je ne remercie personne , vu que je n'ai pas eu d'aide sur ce post.

Je m'en suis sorti quand même.  Mon problème venait du fait que j'avais chargé la mauvaise image de système et je chargeais Ubuntu au lieu de Xubuntu.
voir cet autre post ici

Je poste en résolu


1) ASUSPRO S340MF  Intel® Core™ i3-9100 CPU @ 3.60GHz × 4  carte Mesa Intel® UHD Graphics 630 (CFL GT2)
systèmes :  Ubuntu 20.04.2
2) ASUS X55W8 Intel Pentium 2020 RAM DDR3 4 Go - Intel HD - Ubuntu 20.04.02

Hors ligne