Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 18/07/2018, à 11:42

GammaDraconis

[Réglé] 20 secondes d'attente avant déblocage du boot : une idée ?

Bonjour,

Sur le PC HP (pc de bureau) de quelqu'un de ma famille avec la distribution "Ubuntu Mate 18.04", il y a un soucis au niveau du boot. D'abord sachez que ce n'est pas spécifique à l'environnement Mate puisque cela fait la même chose avec la version classique d'Ubuntu (Gnome) ou même des variantes comme Linux Mint avec Cinnamon.

En faite au moment du grub, quand on sélection "Ubuntu", la système ne va pas booter tous de suite (le voyant du disque dur ne s'allume pas) et cela pendant environ 20 secondes (19" pour être précis) donc avec un écran totalement noir ou rien ne se passe. Au bout de ses 20 secondes le chargement de l'OS commence à charger avec le logo ubuntu (et le voyant disque dur qui clignote) et à une vitesse normale.

Donc le soucis ce situe avant le chargement de la distrib linux, auriez-vous une idée de ce qui pourrai bloquer ?

A noté que la commande "systemd-analyse" ne montre pas le blocage car il doit prendre en compte le début seulement au moment ou ça commence à charger (ce qui est logique) donc le temps qui l'affiche est tout à fait bon (il est équipé d'un SSD bien que ça soit sur un pc plus trop récent) :

Startup finished in 5.851s (kernel) + 5.494s (userspace) = 11.345s
graphical.target reached after 3.388s in userspace

mais comme je l'ai indiqué, le problème se situe avant le lancement des premiers services avec SystemD donc il ne prend pas en compte les 20 secondes d'attente précédente ou rien ne se passe.
C'est dommage que le temps de boot soit doublé uniquement a cause de l'attente inutile au début.
A noté que j'ai testé en sélectionnant l'ancienne version du noyau (4.15.0-23) et ça ne change rien, pas sûr que ça vienne du noyau)

Voici quelques infos sur la config de ce PC (qui n'est pas à moi) :

System:    Host: PCHP-LIN Kernel: 4.15.0-24-generic x86_64 bits: 64 gcc: 7.3.0
Machine:   Device: desktop System: Hewlett-Packard product: G5310fr serial: N/A
           Mobo: FOXCONN model: 2A8C v: 1.1 serial: N/A
           BIOS: American Megatrends v: 6.07 date: 03/21/2011
           Chassis: type: 3 serial: N/A
CPU:       Dual core Pentium E5800 (-MCP-) arch: Penryn rev.10 cache: 2048 KB
           flags: (lm nx sse sse2 sse3 ssse3 vmx) bmips: 12801
           clock speeds: max: 3200 MHz 1: 3200 MHz 2: 3200 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 405] bus-ID: 01:00.0 chip-ID: 10de:10c5
           Display Server: x11 (X.Org 1.19.6 )
           drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
           Resolution: 1920x1080@60.00hz
           OpenGL: renderer: GeForce 405/PCIe/SSE2 version: 3.3.0 NVIDIA 340.106 Direct Render: Yes
Audio:     Card-1 Intel NM10/ICH7 Family High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:27d8
           Card-2 NVIDIA High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0be3
           Card-3 Logitech Webcam C170 driver: USB Audio usb-ID: 001-002 chip-ID: 046d:082b
           Sound: Advanced Linux Sound Architecture v: k4.15.0-24-generic
Network:   Card: Realtek RTL8101/2/6E PCIE Fast/Gigabit Ethernet controller
           driver: r8169 v: 2.3LK-NAPI port: e800 bus-ID: 03:00.0 chip-ID: 10ec:8136
           IF: ens33 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 1120.2GB (75.1% used)
           ID-1: /dev/sda model: KINGSTON_SA400S3 size: 120.0GB serial: <filter>
           ID-2: /dev/sdb model: ST31000528AS size: 1000.2GB serial: <filter>
Partition: ID-1: / size: 26G used: 9.6G (40%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 84G used: 13G (16%) fs: ext4 dev: /dev/sda5
           ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sdb1
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Sensors:   System Temperatures: cpu: 45.0C mobo: N/A gpu: 0.0:54C
           Fan Speeds (in rpm): cpu: N/A

Auriez-vous une solution ou une manip à tenter ? par exemple une option dans la config du grub ?

Dernière modification par GammaDraconis (Le 18/07/2018, à 16:50)

Discussion sur mon script de post-install pour Ubuntu 20.04LTS : https://forum.ubuntu-fr.org/viewtopic.php?id=2026344
Lien direct script : https://github.com/simbd/Ubuntu_20.04LTS_PostInstall
Démo vidéo (peertube) : https://video.ploud.fr/videos/watch/fb7 … 0d252ed2db

Hors ligne

#2 Le 18/07/2018, à 12:55

erresse

Re : [Réglé] 20 secondes d'attente avant déblocage du boot : une idée ?

Salut,
Ni manip, ni solution, malheureusement, mais une remarque :
Puisque tu obtiens le même résultat avec plusieurs versions de systèmes ou de distribution, il y a peu de chances que cette attente soit liée à la version 18.04... Est-ce que ça ne le faisait pas avant, sur une version antérieure, comme la 16.04 par exemple ?
Je ne sais pas à quel moment la journalisation du log commence au démarrage, mais je suppose que ça part au minimum du moment où le système lui-même commence à se charger. Donc cette latence intervenant avant serait à rechercher dans les procédures exécutées par le bios de la machine, non ? Y a-t-il une trace quelconque, un log ou une trace sur l'écran de démarrage, où tu pourrais voir à quel niveau il bloque et, peut-être (soyons fous), sur quoi il renâcle ?

Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#3 Le 18/07/2018, à 13:01

LeJediGris

Re : [Réglé] 20 secondes d'attente avant déblocage du boot : une idée ?

Salut,

A tout hasard quand même, regarde le timing du log via dmesg...

A+

%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution

Hors ligne

#4 Le 18/07/2018, à 13:18

GammaDraconis

Re : [Réglé] 20 secondes d'attente avant déblocage du boot : une idée ?

il n'y a rien d'affiché au moment ou ça bloque, même en activant le mode verbeux de grub, ça reste sur un écran noir et le disque dur ne travail pas.

Sinon avant il n'avait pas de SSD et n'était pas sous linux donc je pouvais pas comparer (le temps était quand même plus long il me semble)

Sinon la commande "dmesg" n'affiche pas le problème car ça bloque avant.

je met quand même le retour

[    0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.000000] Linux version 4.15.0-24-generic (buildd@lgw01-amd64-056) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #26-Ubuntu SMP Wed Jun 13 08:44:47 UTC 2018 (Ubuntu 4.15.0-24.26-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-24-generic root=UUID=39c021a1-f6d1-4d02-9a4d-5d0eea0c779f ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffadfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffae000-0x00000000bffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard G5310fr/2A8C, BIOS 6.07 03/21/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 4096M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64K 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] BRK [0x6b33f000, 0x6b33ffff] PGTABLE
[    0.000000] BRK [0x6b340000, 0x6b340fff] PGTABLE
[    0.000000] BRK [0x6b341000, 0x6b341fff] PGTABLE
[    0.000000] BRK [0x6b342000, 0x6b342fff] PGTABLE
[    0.000000] BRK [0x6b343000, 0x6b343fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31337000-0x34992fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F9C80 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000BFFA0100 00005C (v01 HPQOEM SLIC-CPC 20110321 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BFFA0290 0000F4 (v03 HPQOEM SLIC-CPC 20110321 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BFFA05C0 005A6B (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BFFAE000 000040
[    0.000000] ACPI: FACS 0x00000000BFFAE000 000040
[    0.000000] ACPI: APIC 0x00000000BFFA0390 00006C (v01 HPQOEM SLIC-CPC 20110321 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BFFA0400 00003C (v01 HPQOEM SLIC-CPC 20110321 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000BFFA0440 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[    0.000000] ACPI: OEMB 0x00000000BFFAE040 000072 (v01 HPQOEM SLIC-CPC 20110321 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BFFAA670 000038 (v01 HPQOEM SLIC-CPC 20110321 MSFT 00000097)
[    0.000000] ACPI: GSCI 0x00000000BFFAE0C0 002024 (v01 HPQOEM SLIC-CPC 20110321 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bff9ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048382
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12223 pages used for memmap
[    0.000000]   DMA32 zone: 782240 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbffadfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffae000-0xbffeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1031978
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-24-generic root=UUID=39c021a1-f6d1-4d02-9a4d-5d0eea0c779f ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3977364K/4193528K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 216164K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39092 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3200.051 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.10 BogoMIPS (lpj=12800204)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.029433] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.030526] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.030594] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.030629] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.030934] CPU: Physical Processor ID: 0
[    0.030936] CPU: Processor Core ID: 0
[    0.030937] mce: CPU supports 6 MCE banks
[    0.030944] CPU0: Thermal monitoring enabled (TM2)
[    0.030946] process: using mwait in idle threads
[    0.030951] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.030952] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.030954] Spectre V2 : Mitigation: Full generic retpoline
[    0.030955] Speculative Store Bypass: Vulnerable
[    0.031091] Freeing SMP alternatives memory: 36K
[    0.036000] smpboot: CPU0: Intel Pentium(R) Dual-Core  CPU      E5800  @ 3.20GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.036000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.036000] ... version:                2
[    0.036000] ... bit width:              40
[    0.036000] ... generic registers:      2
[    0.036000] ... value mask:             000000ffffffffff
[    0.036000] ... max period:             000000007fffffff
[    0.036000] ... fixed-purpose events:   3
[    0.036000] ... event mask:             0000000700000003
[    0.036000] Hierarchical SRCU implementation.
[    0.036000] smp: Bringing up secondary CPUs ...
[    0.036000] x86: Booting SMP configuration:
[    0.036000] .... node  #0, CPUs:      #1
[    0.038060] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.038183] smp: Brought up 1 node, 2 CPUs
[    0.038183] smpboot: Max logical packages: 2
[    0.038183] smpboot: Total of 2 processors activated (12800.20 BogoMIPS)
[    0.040273] devtmpfs: initialized
[    0.040273] x86/mm: Memory block size: 128MB
[    0.040558] evm: security.selinux
[    0.040559] evm: security.SMACK64
[    0.040560] evm: security.SMACK64EXEC
[    0.040560] evm: security.SMACK64TRANSMUTE
[    0.040561] evm: security.SMACK64MMAP
[    0.040561] evm: security.apparmor
[    0.040562] evm: security.ima
[    0.040562] evm: security.capability
[    0.040621] PM: Registering ACPI NVS region [mem 0xbffae000-0xbffeffff] (270336 bytes)
[    0.040676] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040676] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.040676] pinctrl core: initialized pinctrl subsystem
[    0.040676] RTC time: 11:08:37, date: 07/18/18
[    0.040676] NET: Registered protocol family 16
[    0.040676] audit: initializing netlink subsys (disabled)
[    0.040676] audit: type=2000 audit(1531912117.040:1): state=initialized audit_enabled=0 res=1
[    0.040676] cpuidle: using governor ladder
[    0.040676] cpuidle: using governor menu
[    0.040676] ACPI: bus type PCI registered
[    0.040676] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040676] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.040676] PCI: not using MMCONFIG
[    0.040676] PCI: Using configuration type 1 for base access
[    0.044025] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044084] ACPI: Added _OSI(Module Device)
[    0.044085] ACPI: Added _OSI(Processor Device)
[    0.044086] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044087] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044088] ACPI: Added _OSI(Linux-Dell-Video)
[    0.044278] ACPI: Executed 1 blocks of module-level executable AML code
[    0.049216] ACPI: Interpreter enabled
[    0.049235] ACPI: (supports S0 S1 S3 S4 S5)
[    0.049236] ACPI: Using IOAPIC for interrupt routing
[    0.049269] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.051890] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.051905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.052772] ACPI: GPE 0x1B active on init
[    0.052783] ACPI: Enabled 12 GPEs in block 00 to 1F
[    0.064479] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.064485] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.064786] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.065078] PCI host bridge to bus 0000:00
[    0.065080] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.065082] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.065083] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.065084] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.065085] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.065087] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
[    0.065088] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.065097] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[    0.065119] DMAR: Forcing write-buffer flush capability
[    0.065120] DMAR: Disabling IOMMU for graphics on this chipset
[    0.065200] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[    0.065238] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.065342] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.065361] pci 0000:00:1b.0: reg 0x10: [mem 0xfcffc000-0xfcffffff 64bit]
[    0.065425] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.065511] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.065574] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.065663] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.065730] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.065821] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.065858] pci 0000:00:1d.0: reg 0x20: [io  0xcc00-0xcc1f]
[    0.065957] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.065996] pci 0000:00:1d.1: reg 0x20: [io  0xc880-0xc89f]
[    0.066091] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.066129] pci 0000:00:1d.2: reg 0x20: [io  0xc800-0xc81f]
[    0.066226] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.066264] pci 0000:00:1d.3: reg 0x20: [io  0xc480-0xc49f]
[    0.066367] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.066385] pci 0000:00:1d.7: reg 0x10: [mem 0xfcffbc00-0xfcffbfff]
[    0.066456] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.066535] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.066654] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.066730] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.066734] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.066736] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    0.066833] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.066848] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.066856] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.066863] pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
[    0.066871] pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
[    0.066878] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[    0.066895] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.066896] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.066897] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.066898] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.066981] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.066995] pci 0000:00:1f.2: reg 0x10: [io  0xc400-0xc407]
[    0.067002] pci 0000:00:1f.2: reg 0x14: [io  0xc080-0xc083]
[    0.067008] pci 0000:00:1f.2: reg 0x18: [io  0xc000-0xc007]
[    0.067014] pci 0000:00:1f.2: reg 0x1c: [io  0xbc00-0xbc03]
[    0.067021] pci 0000:00:1f.2: reg 0x20: [io  0xb880-0xb88f]
[    0.067052] pci 0000:00:1f.2: PME# supported from D3hot
[    0.067131] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.067181] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.067306] pci 0000:01:00.0: [10de:10c5] type 00 class 0x030000
[    0.067320] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.067329] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.067338] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[    0.067344] pci 0000:01:00.0: reg 0x24: [io  0xdc00-0xdc7f]
[    0.067350] pci 0000:01:00.0: reg 0x30: [mem 0xfea80000-0xfeafffff pref]
[    0.067355] pci 0000:01:00.0: enabling Extended Tags
[    0.067436] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[    0.067448] pci 0000:01:00.1: reg 0x10: [mem 0xfea7c000-0xfea7ffff]
[    0.067481] pci 0000:01:00.1: enabling Extended Tags
[    0.067568] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.067570] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.067572] pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfeafffff]
[    0.067575] pci 0000:00:01.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.067613] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.067671] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.067698] pci 0000:03:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.067723] pci 0000:03:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[    0.067739] pci 0000:03:00.0: reg 0x20: [mem 0xfbff0000-0xfbffffff 64bit pref]
[    0.067749] pci 0000:03:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[    0.067826] pci 0000:03:00.0: supports D1 D2
[    0.067827] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.076030] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.076036] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.076042] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.076050] pci 0000:00:1c.1:   bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.076158] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.076171] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.076175] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.076179] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.076182] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.076186] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.076189] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
[    0.078018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.078093] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.078166] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.078239] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.078312] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.078385] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.078459] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.078533] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.078851] SCSI subsystem initialized
[    0.078862] libata version 3.00 loaded.
[    0.078862] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.078862] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.078862] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.078862] vgaarb: loaded
[    0.078862] ACPI: bus type USB registered
[    0.078862] usbcore: registered new interface driver usbfs
[    0.078862] usbcore: registered new interface driver hub
[    0.078862] usbcore: registered new device driver usb
[    0.078862] EDAC MC: Ver: 3.0.0
[    0.078862] PCI: Using ACPI for IRQ routing
[    0.080877] PCI: pci_cache_line_size set to 64 bytes
[    0.080916] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.080918] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[    0.084000] NetLabel: Initializing
[    0.084000] NetLabel:  domain hash size = 128
[    0.084000] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.084000] NetLabel:  unlabeled traffic allowed by default
[    0.084082] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.084086] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.084089] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.086095] clocksource: Switched to clocksource hpet
[    0.099014] VFS: Disk quotas dquot_6.6.0
[    0.099038] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.099188] AppArmor: AppArmor Filesystem Enabled
[    0.099225] pnp: PnP ACPI init
[    0.099342] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.099344] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.099349] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.099447] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.100971] system 00:02: [io  0x0a00-0x0a0f] has been reserved
[    0.100973] system 00:02: [io  0x0a10-0x0a1f] has been reserved
[    0.100974] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.100976] system 00:02: [io  0x0a30-0x0a3f] has been reserved
[    0.100980] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101115] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.101117] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.101118] system 00:03: [io  0x0480-0x04bf] has been reserved
[    0.101120] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.101122] system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.101126] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101241] system 00:04: [mem 0xffc00000-0xffefffff] has been reserved
[    0.101245] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101384] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.101386] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.101390] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101471] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.101475] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101693] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.101695] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.101697] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.101698] system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.101702] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.101861] pnp: PnP ACPI: found 8 devices
[    0.108156] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.108175] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.108178] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.108179] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.108197] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.108201] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.108204] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.108207] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.108209] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.108211] pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfeafffff]
[    0.108214] pci 0000:00:01.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.108217] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.108219] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.108222] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.108225] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.108230] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.108232] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.108235] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.108238] pci 0000:00:1c.1:   bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.108243] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.108252] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.108253] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.108255] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.108256] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.108257] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.108259] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff window]
[    0.108260] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.108261] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff]
[    0.108263] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.108264] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.108265] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.108267] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.108268] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.108269] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.108270] pci_bus 0000:03: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.108272] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.108273] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.108275] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.108276] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.108277] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xdfffffff window]
[    0.108279] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff window]
[    0.108360] NET: Registered protocol family 2
[    0.108646] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.108767] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.108945] TCP: Hash tables configured (established 32768 bind 32768)
[    0.109002] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.109028] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.109096] NET: Registered protocol family 1
[    0.109783] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.109792] PCI: CLS 32 bytes, default 64
[    0.109844] Unpacking initramfs...
[    0.875144] Freeing initrd memory: 55664K
[    0.875199] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.875206] software IO TLB [mem 0xbbfa0000-0xbffa0000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.875395] Scanning for low memory corruption every 60 seconds
[    0.876044] Initialise system trusted keyrings
[    0.876054] Key type blacklist registered
[    0.876125] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.877582] zbud: loaded
[    0.878072] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.878273] fuse init (API version 7.26)
[    0.879472] Key type asymmetric registered
[    0.879473] Asymmetric key parser 'x509' registered
[    0.879511] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.879541] io scheduler noop registered
[    0.879542] io scheduler deadline registered
[    0.879590] io scheduler cfq registered (default)
[    0.879909] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.880264] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    0.880294] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    0.880316] pcieport 0000:00:1c.1: Signaling PME with IRQ 26
[    0.880335] pciehp 0000:00:1c.0:pcie004: Slot #32 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    0.880365] pciehp 0000:00:1c.1:pcie004: Slot #33 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    0.880441] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.880442] vesafb: scrolling: redraw
[    0.880443] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.880457] vesafb: framebuffer at 0xcf000000, mapped to 0x        (ptrval), using 5120k, total 5120k
[    0.880576] Console: switching to colour frame buffer device 160x64
[    0.880603] fb0: VESA VGA frame buffer device
[    0.880617] intel_idle: does not run on family 6 model 23
[    0.880710] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.880719] ACPI: Power Button [PWRB]
[    0.880758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.880779] ACPI: Power Button [PWRF]
[    0.881277] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.883256] Linux agpgart interface v0.103
[    0.884884] loop: module loaded
[    0.885022] ata_piix 0000:00:1f.1: version 2.13
[    0.886204] scsi host0: ata_piix
[    0.886299] scsi host1: ata_piix
[    0.886332] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.886333] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.886416] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.052009] scsi host2: ata_piix
[    1.052083] scsi host3: ata_piix
[    1.052116] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[    1.052117] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[    1.052209] libphy: Fixed MDIO Bus: probed
[    1.052210] tun: Universal TUN/TAP device driver, 1.6
[    1.052270] PPP generic driver version 2.4.2
[    1.052317] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.052321] ehci-pci: EHCI PCI platform driver
[    1.052425] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.052431] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.052442] ehci-pci 0000:00:1d.7: debug port 1
[    1.056355] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.056368] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcffbc00
[    1.072020] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.072097] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.072101] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.072105] usb usb1: Product: EHCI Host Controller
[    1.072108] usb usb1: Manufacturer: Linux 4.15.0-24-generic ehci_hcd
[    1.072111] usb usb1: SerialNumber: 0000:00:1d.7
[    1.072265] hub 1-0:1.0: USB hub found
[    1.072271] hub 1-0:1.0: 8 ports detected
[    1.072438] ehci-platform: EHCI generic platform driver
[    1.072449] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.072452] ohci-pci: OHCI PCI platform driver
[    1.072461] ohci-platform: OHCI generic platform driver
[    1.072466] uhci_hcd: USB Universal Host Controller Interface driver
[    1.072544] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.072548] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.072554] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.072569] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[    1.072606] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.072608] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.072609] usb usb2: Product: UHCI Host Controller
[    1.072610] usb usb2: Manufacturer: Linux 4.15.0-24-generic uhci_hcd
[    1.072612] usb usb2: SerialNumber: 0000:00:1d.0
[    1.072695] hub 2-0:1.0: USB hub found
[    1.072700] hub 2-0:1.0: 2 ports detected
[    1.072848] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.072852] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.072859] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.072875] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
[    1.072912] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.072913] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.072915] usb usb3: Product: UHCI Host Controller
[    1.072916] usb usb3: Manufacturer: Linux 4.15.0-24-generic uhci_hcd
[    1.072917] usb usb3: SerialNumber: 0000:00:1d.1
[    1.072996] hub 3-0:1.0: USB hub found
[    1.073001] hub 3-0:1.0: 2 ports detected
[    1.073141] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.073146] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.073151] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.073174] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[    1.073213] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.073215] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.073216] usb usb4: Product: UHCI Host Controller
[    1.073217] usb usb4: Manufacturer: Linux 4.15.0-24-generic uhci_hcd
[    1.073219] usb usb4: SerialNumber: 0000:00:1d.2
[    1.073308] hub 4-0:1.0: USB hub found
[    1.073313] hub 4-0:1.0: 2 ports detected
[    1.073450] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.073454] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.073459] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.073482] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
[    1.073519] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.073520] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.073522] usb usb5: Product: UHCI Host Controller
[    1.073523] usb usb5: Manufacturer: Linux 4.15.0-24-generic uhci_hcd
[    1.073524] usb usb5: SerialNumber: 0000:00:1d.3
[    1.073605] hub 5-0:1.0: USB hub found
[    1.073610] hub 5-0:1.0: 2 ports detected
[    1.073733] i8042: PNP: No PS/2 controller found.
[    1.073733] i8042: Probing ports directly.
[    1.074105] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.074113] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.074357] mousedev: PS/2 mouse device common for all mice
[    1.074519] rtc_cmos 00:01: RTC can wake from S4
[    1.074624] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.074647] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.074653] i2c /dev entries driver
[    1.074709] device-mapper: uevent: version 1.0.3
[    1.074771] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.074790] ledtrig-cpu: registered to indicate activity on CPUs
[    1.075115] NET: Registered protocol family 10
[    1.079189] Segment Routing with IPv6
[    1.079213] NET: Registered protocol family 17
[    1.079247] Key type dns_resolver registered
[    1.079418] RAS: Correctable Errors collector initialized.
[    1.079458] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[    1.079493] microcode: Microcode Update Driver: v2.2.
[    1.079511] sched_clock: Marking stable (1079489161, 0)->(1162815306, -83326145)
[    1.079662] registered taskstats version 1
[    1.079673] Loading compiled-in X.509 certificates
[    1.082383] Loaded X.509 cert 'Build time autogenerated kernel key: f8416e9c94111a665d2364ad111156633cf58b6a'
[    1.082408] zswap: loaded using pool lzo/zbud
[    1.085930] Key type big_key registered
[    1.085933] Key type trusted registered
[    1.087633] Key type encrypted registered
[    1.087636] AppArmor: AppArmor sha1 policy hashing enabled
[    1.087639] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.087665] evm: HMAC attrs: 0x1
[    1.087882]   Magic number: 10:588:125
[    1.087972] acpi device:00: hash matches
[    1.088048] rtc_cmos 00:01: setting system clock to 2018-07-18 11:08:38 UTC (1531912118)
[    1.088136] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.088137] EDD information not available.
[    1.214496] ata4.00: ATA-8: ST31000528AS, HP35, max UDMA/100
[    1.214498] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.219001] ata4.00: configured for UDMA/100
[    1.232409] ata3.00: ATA-11: KINGSTON SA400S37120G, SBFK71E0, max UDMA/133
[    1.232413] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.232422] ata3.01: ATAPI: hp      DVD-RAM GH60L, RD01, max UDMA/100
[    1.232788] ata3.00: configured for UDMA/133
[    1.256137] ata3.01: configured for UDMA/100
[    1.261764] scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5
[    1.261928] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.261940] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.261952] sd 2:0:0:0: [sda] Write Protect is off
[    1.261953] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.261972] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.265386] scsi 2:0:1:0: CD-ROM            hp       DVD-RAM GH60L    RD01 PQ: 0 ANSI: 5
[    1.339827] sr 2:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.339830] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.340026] sr 2:0:1:0: Attached scsi CD-ROM sr0
[    1.340081] sr 2:0:1:0: Attached scsi generic sg1 type 5
[    1.340286] scsi 3:0:0:0: Direct-Access     ATA      ST31000528AS     HP35 PQ: 0 ANSI: 5
[    1.340440] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.340440] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.340451] sd 3:0:0:0: [sdb] Write Protect is off
[    1.340453] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.340470] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.342109]  sda: sda1 sda2 < sda5 >
[    1.342610] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.367758]  sdb: sdb1 sdb2 sdb3
[    1.368149] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.371553] Freeing unused kernel memory: 2408K
[    1.388024] Write protecting the kernel read-only data: 20480k
[    1.389202] Freeing unused kernel memory: 2008K
[    1.393801] Freeing unused kernel memory: 1904K
[    1.401399] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.401399] x86/mm: Checking user space page tables
[    1.408900] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.412025] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.518934] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.519351] r8169 0000:03:00.0 eth0: RTL8102e at 0x        (ptrval), 64:31:50:2e:b7:9d, XID 04c00000 IRQ 27
[    1.555046] r8169 0000:03:00.0 ens33: renamed from eth0
[    1.641700] usb 1-1: New USB device found, idVendor=046d, idProduct=082b
[    1.641705] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.641708] usb 1-1: Product: Webcam C170
[    1.641712] usb 1-1: Manufacturer:  
[    1.884011] tsc: Refined TSC clocksource calibration: 3199.999 MHz
[    1.884021] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e2048a8b6b, max_idle_ns: 440795205530 ns
[    1.908009] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    2.071020] random: fast init done
[    2.105034] usb 3-1: New USB device found, idVendor=0461, idProduct=0010
[    2.105039] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.105042] usb 3-1: Product: USB Keyboard
[    2.105046] usb 3-1: Manufacturer: NOVATEK
[    2.111153] hidraw: raw HID events driver (C) Jiri Kosina
[    2.150326] usbcore: registered new interface driver usbhid
[    2.150327] usbhid: USB HID core driver
[    2.152363] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:0461:0010.0001/input/input5
[    2.212183] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.1-1/input0
[    2.212384] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:0461:0010.0002/input/input6
[    2.272152] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.1-1/input1
[    2.904007] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[    2.908079] clocksource: Switched to clocksource tsc
[    3.292003] usb 1-7: new high-speed USB device number 5 using ehci-pci
[    3.296034] usb 3-2: New USB device found, idVendor=04f3, idProduct=0234
[    3.296039] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.296042] usb 3-2: Product: OM
[    3.313473] input: OM as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:04F3:0234.0003/input/input7
[    3.313568] hid-generic 0003:04F3:0234.0003: input,hidraw2: USB HID v1.11 Mouse [OM] on usb-0000:00:1d.1-2/input0
[    3.449278] usb 1-7: New USB device found, idVendor=058f, idProduct=6366
[    3.449282] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.449286] usb 1-7: Product: Mass Storage Device
[    3.449289] usb 1-7: Manufacturer: Generic
[    3.449292] usb 1-7: SerialNumber: 058F63666433
[    3.740085] usb-storage 1-7:1.0: USB Mass Storage device detected
[    3.740199] scsi host4: usb-storage 1-7:1.0
[    3.740274] usbcore: registered new interface driver usb-storage
[    3.741483] usbcore: registered new interface driver uas
[    4.764673] scsi 4:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    4.766935] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    4.770685] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    4.980002] raid6: sse2x1   gen()  4706 MB/s
[    5.027990] raid6: sse2x1   xor()  5223 MB/s
[    5.075994] raid6: sse2x2   gen()  5297 MB/s
[    5.123993] raid6: sse2x2   xor()  6387 MB/s
[    5.171990] raid6: sse2x4   gen()  9387 MB/s
[    5.219988] raid6: sse2x4   xor()  6976 MB/s
[    5.219989] raid6: using algorithm sse2x4 gen() 9387 MB/s
[    5.219990] raid6: .... xor() 6976 MB/s, rmw enabled
[    5.219991] raid6: using ssse3x2 recovery algorithm
[    5.223216] xor: measuring software checksum speed
[    5.259989]    prefetch64-sse: 12966.000 MB/sec
[    5.299988]    generic_sse: 11498.000 MB/sec
[    5.299989] xor: using function: prefetch64-sse (12966.000 MB/sec)
[    5.319080] Btrfs loaded, crc32c=crc32c-generic
[    5.556829] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.796684] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.810611] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.828127] systemd[1]: Detected architecture x86-64.
[    5.829898] systemd[1]: Set hostname to <PCHP-MINT>.
[    6.016261] random: systemd: uninitialized urandom read (16 bytes read)
[    6.016499] systemd[1]: Created slice System Slice.
[    6.016562] random: systemd: uninitialized urandom read (16 bytes read)
[    6.016688] systemd[1]: Created slice User and Session Slice.
[    6.016706] random: systemd: uninitialized urandom read (16 bytes read)
[    6.016806] systemd[1]: Listening on Journal Socket.
[    6.016822] random: systemd: uninitialized urandom read (16 bytes read)
[    6.017650] systemd[1]: Starting Availability of block devices...
[    6.017735] random: systemd: uninitialized urandom read (16 bytes read)
[    6.017750] systemd[1]: Reached target Remote File Systems.
[    6.017773] random: systemd: uninitialized urandom read (16 bytes read)
[    6.017781] systemd[1]: Reached target Slices.
[    6.017901] random: systemd: uninitialized urandom read (16 bytes read)
[    6.017960] systemd[1]: Listening on Journal Audit Socket.
[    6.017983] random: systemd: uninitialized urandom read (16 bytes read)
[    6.018114] random: systemd: uninitialized urandom read (16 bytes read)
[    6.018221] random: systemd: uninitialized urandom read (16 bytes read)
[    6.070855] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.145695] lp: driver loaded but no devices found
[    6.156525] ppdev: user-space parallel port driver
[    6.193703] systemd-journald[348]: Received request to flush runtime journal from PID 1
[    6.414578] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.452932] intel_rng: Firmware space is locked read-only. If you can't or
               intel_rng: don't want to disable this in firmware setup, and if
               intel_rng: you are certain that your system has a functional
               intel_rng: RNG, try using the 'no_fwh_detect' option.
[    6.493504] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000499-0x0000000000000499 (\GPBL) (20170831/utaddress-247)
[    6.493512] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048F-0x000000000000048F (\GPBK) (20170831/utaddress-247)
[    6.493515] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048D-0x000000000000048D (\_SB.PCI0.SBRG.GPBM) (20170831/utaddress-247)
[    6.493519] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.498723] leds_ss4200: no LED devices found
[    6.719327] intel_powerclamp: No package C-state available
[    6.750156] intel_powerclamp: No package C-state available
[    6.838929] media: Linux media interface: v0.10
[    6.864091] Linux video capture interface: v2.00
[    6.879226] nvidia: loading out-of-tree module taints kernel.
[    6.879235] nvidia: module license 'NVIDIA' taints kernel.
[    6.879235] Disabling lock debugging due to kernel taint
[    6.895081] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    6.904205] snd_hda_intel 0000:01:00.1: Disabling MSI
[    6.904213] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    6.911505] usbcore: registered new interface driver snd-usb-audio
[    6.917985] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    6.921955] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    6.921958] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.921960] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    6.921961] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.921962] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.921964] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    6.921966] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    6.921967] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    6.932209] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[    6.932222] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.106  Tue Jan  9 15:10:23 PST 2018
[    6.937344] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    6.937406] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    6.937475] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.937533] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    6.937588] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    6.955258] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
[    6.961134] uvcvideo 1-1:1.0: Entity type for entity Processing 2 was not initialized!
[    6.961137] uvcvideo 1-1:1.0: Entity type for entity Extension 6 was not initialized!
[    6.961139] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized!
[    6.961220] input: Webcam C170: Webcam C170 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input13
[    6.961313] usbcore: registered new interface driver uvcvideo
[    6.961313] USB Video Class driver (1.1.1)
[    6.994567] Adding 4194300k swap on /dev/sdb1.  Priority:-2 extents:1 across:4194300k FS
[    7.089147] gpio_ich: GPIO from 462 to 511 on gpio_ich
[    7.143530] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    7.173290] nvidia_uvm: Loaded the UVM driver, major device number 243
[    7.302137] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[    7.302333] caller os_map_kernel_space+0x86/0xb0 [nvidia] mapping multiple BARs
[    7.376414] random: crng init done
[    7.383904] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    7.712320] audit: type=1400 audit(1531912125.092:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=650 comm="apparmor_parser"
[    7.712325] audit: type=1400 audit(1531912125.092:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=650 comm="apparmor_parser"
[    7.712327] audit: type=1400 audit(1531912125.092:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=651 comm="apparmor_parser"
[    7.712330] audit: type=1400 audit(1531912125.092:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=651 comm="apparmor_parser"
[    7.712333] audit: type=1400 audit(1531912125.092:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=651 comm="apparmor_parser"
[    7.712336] audit: type=1400 audit(1531912125.092:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=651 comm="apparmor_parser"
[    7.712339] audit: type=1400 audit(1531912125.096:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=653 comm="apparmor_parser"
[    7.712341] audit: type=1400 audit(1531912125.096:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=653 comm="apparmor_parser"
[    7.712344] audit: type=1400 audit(1531912125.096:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=653 comm="apparmor_parser"
[    7.712346] audit: type=1400 audit(1531912125.096:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=654 comm="apparmor_parser"
[    7.768244] NVRM: Your system is not currently configured to drive a VGA console
[    7.768246] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[    7.768247] NVRM: requires the use of a text-mode VGA console. Use of other console
[    7.768247] NVRM: drivers including, but not limited to, vesafb, may result in
[    7.768248] NVRM: corruption and stability problems, and is not supported.
[    8.522597] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
[    8.522672] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[    8.522729] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[    8.522784] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
[    9.203302] IPv6: ADDRCONF(NETDEV_UP): ens33: link is not ready
[    9.217254] r8169 0000:03:00.0 ens33: link down
[    9.217256] r8169 0000:03:00.0 ens33: link down
[    9.217368] IPv6: ADDRCONF(NETDEV_UP): ens33: link is not ready
[    9.733056] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[    9.733280] caller os_map_kernel_space+0x86/0xb0 [nvidia] mapping multiple BARs
[   10.720779] r8169 0000:03:00.0 ens33: link up
[   10.720791] IPv6: ADDRCONF(NETDEV_CHANGE): ens33: link becomes ready
[   13.144021] usb 1-1: reset high-speed USB device number 2 using ehci-pci

Discussion sur mon script de post-install pour Ubuntu 20.04LTS : https://forum.ubuntu-fr.org/viewtopic.php?id=2026344
Lien direct script : https://github.com/simbd/Ubuntu_20.04LTS_PostInstall
Démo vidéo (peertube) : https://video.ploud.fr/videos/watch/fb7 … 0d252ed2db

Hors ligne

#5 Le 18/07/2018, à 14:52

??

Re : [Réglé] 20 secondes d'attente avant déblocage du boot : une idée ?

Bonjour
Tu devrais regarder l'état physique de ton SSD avec smartctl paragraphe 1 et 3.1 de https://doc.ubuntu-fr.org/smartmontools
Je pense particulièrement au compteur "calibration retry count"

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#6 Le 18/07/2018, à 14:59

inbox

Re : [Réglé] 20 secondes d'attente avant déblocage du boot : une idée ?

Salut,

Afin de réinitialiser le matériel, tu peux, après l'avoir éteint, débrancher le câble d'alimentation pendant 5 minutes. Ensuite, tu réessayes de démarrer.

A+

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#7 Le 18/07/2018, à 16:49

GammaDraconis

Re : [Réglé] 20 secondes d'attente avant déblocage du boot : une idée ?

Le SSD est neuf, ça ne venait pas de là.

J'ai pu régler problème, je ne sais pas la cause exact du problème mais j'ai remis les paramètres du bios avec les réglages par défaut et maintenant ça boot directement sans attente.

problème auto-résolu

Discussion sur mon script de post-install pour Ubuntu 20.04LTS : https://forum.ubuntu-fr.org/viewtopic.php?id=2026344
Lien direct script : https://github.com/simbd/Ubuntu_20.04LTS_PostInstall
Démo vidéo (peertube) : https://video.ploud.fr/videos/watch/fb7 … 0d252ed2db

Hors ligne

#8 Le 18/07/2018, à 16:53

??

Re : [Réglé] 20 secondes d'attente avant déblocage du boot : une idée ?

GammaDraconis a écrit :

j'ai remis les paramètres du bios avec les réglages par défaut et maintenant ça boot directement sans attente.

Si je comprends bien, tu t'amuses à fabriquer des incidents pour voir si on va les détecter rapidement. tongue

Dernière modification par ?? (Le 18/07/2018, à 16:54)

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

Pages : 1