#1 Le 27/08/2018, à 22:06
- Speakers
[Résolu] Installer Linux sur HP: bonne idée?
Bonjour,
Je voulais savoir si c'était une mauvaise idée d'installer Linux sur un ordinateur HP. J'ai des craintes car, actuellement, mon ordinateur dispose d'une assistance HP (HP Support Assistant) qui me permet de mettre à jour régulièrement des périphériques, BIOS...
Je voulais savoir si, en installant Linux, les mises à jour HP continueront à se faire? Si oui, est-ce qu'ils se feront toujours par l'intermédiaire de cet assistant?
Merci à ceux qui prendront le temps de me répondre.
Dernière modification par Speakers (Le 28/08/2018, à 21:09)
Hors ligne
#2 Le 28/08/2018, à 06:50
- malbo
Re : [Résolu] Installer Linux sur HP: bonne idée?
D'après ce que je viens de voir dans Google, "HP Support Assistant" est une application Windows. Par conséquent, si tu installes Ubuntu en cohabitation avec Windows (on dit "en dual-boot"), ton application "HP Support Assistant" continuera à te rendre le même service qu'avant et plus généralement, ton Windows fonctionnera comme avant.
Dernière modification par malbo (Le 28/08/2018, à 06:51)
Hors ligne
#3 Le 28/08/2018, à 07:47
- nam1962
Re : [Résolu] Installer Linux sur HP: bonne idée?
Perso, je n'utilise plus le dual boot et dans mes installs sur ordi HP, le HP assistant est la première cochonnerie que je vire.
Ca ne m'a jamais posé de problème.
Par ailleurs, les pilotes de périphériques installés par cet assistant sont pour W$, pas pour Linux (c'est le noyau linux qui embarque la plupart des pilotes)
Seul truc à faire : vérifier que le BIOS est à jour lors d'une full install Linux, car les mises à jour de BIOS sont fastidieuses sous Linux. Maintenant, un BIOS "à jour" n'est pas forcément utile, dans certains cas, le firmware bugge et on doit au contraire installer une version antérieure (j'avais eu ça sur des dv6000 !)
Dernière modification par nam1962 (Le 28/08/2018, à 07:47)
[ Modéré ]
Hors ligne
#4 Le 28/08/2018, à 07:54
- malbo
Re : [Résolu] Installer Linux sur HP: bonne idée?
@Speakers : l'intervention de nam1962 me fait douter. Est-ce que ton souhait est bien de conserver Windows et d'installer Ubuntu en cohabitation avec Windows ou bien est-ce que tu veux virer carrément Windows pour le remplacer par Ubuntu ?
Dernière modification par malbo (Le 28/08/2018, à 18:04)
Hors ligne
#5 Le 28/08/2018, à 10:21
- Speakers
Re : [Résolu] Installer Linux sur HP: bonne idée?
Bonjour,
Merci pour vos réponses, effectivement mon souhait était de faire cohabiter Ubuntu et Windows 10... chose faite mais avec un problème que je rencontres...
Pour installer Ubuntu, j'ai suivi un tutoriel de WikiHow disponible ici: https://fr.wikihow.com/installer-Ubuntu … s-Windows)
J'ai donc suivi les instructions, et j'ai installé Ubuntu, seulement lors du redémarrage, GRUB ne détecte ni Windows 10, ni Ubuntu, ça me renvoie toujours vers le bureau pour installer à nouveau Ubuntu. Lorsque j'essayes à nouveau d'installer Ubuntu, ils me disent que je possède déjà Ubuntu et Dual Boot Manager (je pense que c'est Windows).
Donc ma nouvelle question est la suivante: comment se fait-il que je ne puisse accéder ni à Ubuntu, ni à Windows à cause de GRUB qui me renvoie toujours vers l'installation d'Ubuntu? (ma clé USB est toujours branché à mon pc lorsque je rallumes le pc) Merci!
Dernière modification par Speakers (Le 28/08/2018, à 10:22)
Hors ligne
#6 Le 28/08/2018, à 10:33
- Speakers
Re : [Résolu] Installer Linux sur HP: bonne idée?
Bonjour,
Hier soir, j'ai entrepris l'idée de faire cohabiter W10 et Ubuntu sur mon ordinateur HP récent de quelques mois...
Pour installer Ubuntu, j'ai suivi un tutoriel de WikiHow disponible ici: https://fr.wikihow.com/installer-Ubuntu … s-Windows) avec comme méthode celle de la clé USB.
J'ai donc suivi les instructions, et j'ai installé Ubuntu avec succès, seulement lors du redémarrage, un menu GRUB ne détecte ni W10 ni Ubuntu, le menu me propose seulement des fonctionnalités comme ''Install Ubuntu", "Try and install Ubuntu", ça me renvoie toujours vers le bureau pour installer à nouveau Ubuntu. Lorsque j'essayes à nouveau d'installer Ubuntu, ils me disent que je possède déjà Ubuntu et Dual Boot Manager (je pense que c'est Windows).
Donc ma question est la suivante: comment se fait-il que je ne puisse accéder ni à Ubuntu, ni à Windows à cause de GRUB qui me renvoie toujours vers l'installation d'Ubuntu? (ma clé USB est toujours branché à mon pc lorsque je rallumes le pc) Merci!
Hors ligne
#7 Le 28/08/2018, à 10:38
- nam1962
Re : [Résolu] Installer Linux sur HP: bonne idée?
Dans ce cas, la partition HP Assistant n'a aucune raison d'être touchée.
Tu dis que ta clef USB est toujours branchée, est-ce la live USB ? Si oui et que le bios est réglé sur usb en priorité, il est logique que ca te propose l'installation.
Que se passe t'il quand tu débranches la clef ?
[ Modéré ]
Hors ligne
#8 Le 28/08/2018, à 10:50
- Speakers
Re : [Résolu] Installer Linux sur HP: bonne idée?
Lorsque je débranches ma clé ça me renvoie sur Windows 10, je ne sais pas ce que vous entendez par live USB, c'est une clé USB que je branches directement sur le port de mon PC.
Merci pour votre réponse
Dernière modification par Speakers (Le 28/08/2018, à 10:51)
Hors ligne
#9 Le 28/08/2018, à 11:12
- nam1962
Re : [Résolu] Installer Linux sur HP: bonne idée?
Je ne suis pas bien sûr qu'Ubuntu soit déjà installé sur ton ordi...
malbo dont ce genre de sujet est la spécialité va pouvoir te guider efficacement !
[ Modéré ]
Hors ligne
#10 Le 28/08/2018, à 11:24
- malbo
Re : [Résolu] Installer Linux sur HP: bonne idée?
malbo dont ce genre de sujet est la spécialité va pouvoir te guider efficacement !
Hum ! je m'en pourlèche...
@ Speakers : démarre l'ordi sur ta LiveUSB en sélectionnant "Try Ubuntu without installing" (Essayer Ubuntu sans l'installer). Arrivé sur le bureau de ta session live, je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#11 Le 28/08/2018, à 13:39
- malbo
Re : [Résolu] Installer Linux sur HP: bonne idée?
Mais pourquoi as-tu créé cette nouvelle discussion ? D'autant que je t'ai répondu dans la première discussion que tu as créée : https://forum.ubuntu-fr.org/viewtopic.p … #p21961889
Il fallait continuer dans cette première discussion...
Hors ligne
#12 Le 28/08/2018, à 16:48
- cqfd93
Re : [Résolu] Installer Linux sur HP: bonne idée?
Modération
Bonjour,
Fils fusionnés.
− cqfd93 −
En ligne
#13 Le 28/08/2018, à 17:23
- Speakers
Re : [Résolu] Installer Linux sur HP: bonne idée?
J'ai voulu crée une seconde discussion dans la catégorie approriée, je ne pensais pas avoir des retours sur un problème d'installation dans cette catégorie ci, je suis vraiment navré...
Comme demandé voici mon pastebin: http://paste.ubuntu.com/p/fRMqYqcMJm/
Merci encore!
Hors ligne
#14 Le 28/08/2018, à 18:11
- malbo
Re : [Résolu] Installer Linux sur HP: bonne idée?
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/Boot/bootx64.efi
/EFI/Boot/fbx64.efi /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/shimx64.efi
/EFI/HP/BIOSUpdate/BiosMgmt.efi
/EFI/HP/BIOSUpdate/CryptRSA.efi
/EFI/HP/BIOSUpdate/CryptRSA32.efi
/EFI/HP/BIOSUpdate/HpBiosMgmt.efi
/EFI/HP/BIOSUpdate/HpBiosUpdate.efi
/EFI/HP/SystemDiags/CryptRSA.efi
/EFI/HP/SystemDiags/HpSysDiags.efi
/EFI/HP/SystemDiags/SystemDiags.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: /mnt/BootInfo/sda2: unknown filesystem type ''.
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.07 2013-07-25
Boot sector info: Syslinux looks at sector 10240 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the /uui
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /EFI/BOOT/grubx64.efi
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 250,069,679 250,069,679 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 534,527 532,480 EFI System partition
/dev/sda2 534,528 567,295 32,768 Microsoft Reserved Partition (Windows)
/dev/sda3 567,296 180,827,290 180,259,995 Data partition (Windows/Linux)
/dev/sda4 R 248,049,664 250,056,703 2,007,040 Windows Recovery Environment (Windows)
/dev/sda5 180,828,160 248,049,663 67,221,504 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 3.7 GiB, 4005560320 bytes, 7823360 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 8,064 7,823,359 7,815,296 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/sda1 8267-14BA vfat
/dev/sda2
/dev/sda3 2A0ADE8F0ADE5801 ntfs Windows
/dev/sda4 A28AD3488AD3179D ntfs Windows RE tools
/dev/sda5 fa2d3fcb-824a-4722-b396-dfc1821e1534 ext4
/dev/sdb1 B184-C6E4 vfat UUI
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Aug 28 16:18 ata-SanDisk_SD8SN8U-128G-1006_171768803340 -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 28 16:18 ata-SanDisk_SD8SN8U-128G-1006_171768803340-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 28 16:18 ata-SanDisk_SD8SN8U-128G-1006_171768803340-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 28 16:19 ata-SanDisk_SD8SN8U-128G-1006_171768803340-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Aug 28 16:19 ata-SanDisk_SD8SN8U-128G-1006_171768803340-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Aug 28 16:18 ata-SanDisk_SD8SN8U-128G-1006_171768803340-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Aug 28 16:18 usb-TDK_LoR_TF10_07075567C195C768-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Aug 28 16:18 usb-TDK_LoR_TF10_07075567C195C768-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Aug 28 16:18 wwn-0x5001b448b4a7f361 -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 28 16:18 wwn-0x5001b448b4a7f361-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 28 16:18 wwn-0x5001b448b4a7f361-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 28 16:19 wwn-0x5001b448b4a7f361-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Aug 28 16:19 wwn-0x5001b448b4a7f361-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Aug 28 16:18 wwn-0x5001b448b4a7f361-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid fa2d3fcb-824a-4722-b396-dfc1821e1534 root hd0,gpt5
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 fa2d3fcb-824a-4722-b396-dfc1821e1534
else
search --no-floppy --fs-uuid --set=root fa2d3fcb-824a-4722-b396-dfc1821e1534
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fa2d3fcb-824a-4722-b396-dfc1821e1534' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 fa2d3fcb-824a-4722-b396-dfc1821e1534
else
search --no-floppy --fs-uuid --set=root fa2d3fcb-824a-4722-b396-dfc1821e1534
fi
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=fa2d3fcb-824a-4722-b396-dfc1821e1534 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-29-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-fa2d3fcb-824a-4722-b396-dfc1821e1534' {
menuentry 'Ubuntu, avec Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-fa2d3fcb-824a-4722-b396-dfc1821e1534' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 fa2d3fcb-824a-4722-b396-dfc1821e1534
else
search --no-floppy --fs-uuid --set=root fa2d3fcb-824a-4722-b396-dfc1821e1534
fi
echo 'Chargement de Linux 4.15.0-29-generic…'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=fa2d3fcb-824a-4722-b396-dfc1821e1534 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-29-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-fa2d3fcb-824a-4722-b396-dfc1821e1534' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 fa2d3fcb-824a-4722-b396-dfc1821e1534
else
search --no-floppy --fs-uuid --set=root fa2d3fcb-824a-4722-b396-dfc1821e1534
fi
echo 'Chargement de Linux 4.15.0-29-generic…'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=fa2d3fcb-824a-4722-b396-dfc1821e1534 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-29-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-efi-8267-14BA' {
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 8267-14BA
else
search --no-floppy --fs-uuid --set=root 8267-14BA
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=fa2d3fcb-824a-4722-b396-dfc1821e1534 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=8267-14BA /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
109.109821320 = 117.155778560 boot/grub/grub.cfg 1
114.499443054 = 122.942840832 boot/vmlinuz-4.15.0-29-generic 1
114.499443054 = 122.942840832 vmlinuz 1
116.607765198 = 125.206634496 boot/initrd.img-4.15.0-29-generic 3
116.607765198 = 125.206634496 initrd.img 3
116.607765198 = 125.206634496 initrd.img.old 3
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
set timeout=5
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/5716/mountinfo) leaked on lvs invocation. Parent PID 15946: bash
File descriptor 63 (pipe:[71472]) leaked on lvs invocation. Parent PID 15946: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20180828_1618 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sda5:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="8267-14BA" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="5bbfe4c6-5912-4ff9-968c-66c134293635"
/dev/sda3: LABEL="Windows" UUID="2A0ADE8F0ADE5801" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="2bc92a1a-ce60-42f0-840d-ed36e57b5ef9"
/dev/sda4: LABEL="Windows RE tools" UUID="A28AD3488AD3179D" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="a7a8610b-ab88-4673-acd1-ae0a02c2130b"
/dev/sda5: UUID="fa2d3fcb-824a-4722-b396-dfc1821e1534" TYPE="ext4" PARTUUID="0d065b2e-7b41-40e1-9b15-4ee399002278"
/dev/sdb1: LABEL="UUI" UUID="B184-C6E4" TYPE="vfat" PARTUUID="b1313b29-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda2: PARTLABEL="Microsoft reserved partition" PARTUUID="6dd29868-0b1f-4f5b-b7a2-db689e331da0"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda3.
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/fbx64.efi
=================== sda5/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jul 25 03:08 grub.d
total 80
-rwxr-xr-x 1 root root 9783 Jul 17 18:13 00_header
-rwxr-xr-x 1 root root 6258 Jul 16 15:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 Jul 17 18:13 10_linux
-rwxr-xr-x 1 root root 11298 Jul 17 18:13 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Jul 17 18:13 30_os-prober
-rwxr-xr-x 1 root root 1418 Jul 17 18:13 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jul 17 18:13 40_custom
-rwxr-xr-x 1 root root 216 Jul 17 18:13 41_custom
-rw-r--r-- 1 root root 483 Jul 17 18:13 README
=================== sda5/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda5: UUID=8267-14BA (sda1)
=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 2001,0002,3002,0000,2002,2004
Boot0000* ubuntu HD(1,GPT,5bbfe4c6-5912-4ff9-968c-66c134293635,0x800,0x82000)/File(EFIubuntushimx64.efi)RC
Boot0001* USB Hard Drive (UEFI) - TDK LoR TF10 PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)/HD(1,MBR,0xb1313b29,0x1f80,0x774080)RC
Boot0002* Windows Boot Manager HD(1,GPT,5bbfe4c6-5912-4ff9-968c-66c134293635,0x800,0x82000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....g...............
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot3002* Internal Hard Disk or Solid State Disk RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda3.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda4.
sda5 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda5.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:128GB:scsi:512:4096:gpt:ATA SanDisk SD8SN8U-:;
1:1049kB:274MB:273MB:fat32:EFI system partition:boot, esp;
2:274MB:290MB:16.8MB::Microsoft reserved partition:msftres;
3:290MB:92.6GB:92.3GB:ntfs:Basic data partition:msftdata;
5:92.6GB:127GB:34.4GB:ext4::;
4:127GB:128GB:1028MB:ntfs:Basic data partition:hidden, diag;
BYT;
/dev/sdb:4006MB:scsi:512:512:msdos:TDK LoR TF10:;
1:4129kB:4006MB:4001MB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1.8G
loop1 loop squashfs 86.9M
loop2 loop squashfs 34.7M
loop3 loop squashfs 140.9M
loop4 loop squashfs 2.3M
loop5 loop squashfs 13M
loop6 loop squashfs 14.5M
loop7 loop squashfs 3.7M
sda disk 119.2G
sda1 part vfat 260M
sda2 part 16M
sda3 part ntfs 86G Windows
sda4 part ntfs 980M Windows RE tools
sda5 part ext4 32.1G
sdb disk 3.7G
sdb1 part vfat 3.7G UUI
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
loop1 1 1 0 /snap/core/4917
loop2 1 1 0 /snap/gtk-common-themes/319
loop3 1 1 0 /snap/gnome-3-26-1604/70
loop4 1 1 0 /snap/gnome-calculator/180
loop5 1 1 0 /snap/gnome-characters/103
loop6 1 1 0 /snap/gnome-logs/37
loop7 1 1 0 /snap/gnome-system-monitor/51
sda 0 0 0 running
sda1 0 0 0 /mnt/boot-sav/sda1
sda2 0 0 0
sda3 0 0 0 /mnt/boot-sav/sda3
sda4 0 0 0 /mnt/boot-sav/sda4
sda5 0 0 0 /mnt/boot-sav/sda5
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4014868k,nr_inodes=1003717,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=807208k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
mqueue on /dev/mqueue type mqueue (rw,relatime)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=16474)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=807204k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): acpi_thermal_rel autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 drm_dp_aux2 ecryptfs fb0 fd full fuse gpiochip0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 fe 1b |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 20 08 00 01 02 00 00 00 00 00 00 02 00 00 00 |. ..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 ba 14 67 82 4e 4f 20 4e 41 4d 45 20 20 |..)..g.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 a8 08 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 98 8c be 0a 00 00 00 00 |................|
00000030 21 97 9e 00 00 00 00 00 02 00 00 00 00 00 00 00 |!...............|
00000040 f6 00 00 00 01 00 00 00 01 58 de 0a 8f de 0a 2a |.........X.....*|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 f0 c8 0e |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 9f 1e 00 00 00 00 00 |................|
00000030 aa 48 01 00 00 00 00 00 02 00 00 00 00 00 00 00 |.H..............|
00000040 f6 00 00 00 01 00 00 00 9d 17 d3 8a 48 d3 8a a2 |............H...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 789M 1.6M 787M 1% /run
/dev/sdb1 vfat 3.8G 1.9G 1.9G 50% /cdrom
/dev/loop0 squashfs 1.8G 1.8G 0 100% /rofs
/cow overlay 3.9G 415M 3.5G 11% /
tmpfs tmpfs 3.9G 66M 3.8G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 4.0K 3.9G 1% /tmp
tmpfs tmpfs 789M 56K 789M 1% /run/user/999
/dev/loop1 squashfs 87M 87M 0 100% /snap/core/4917
/dev/loop2 squashfs 35M 35M 0 100% /snap/gtk-common-themes/319
/dev/loop3 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/70
/dev/loop4 squashfs 2.4M 2.4M 0 100% /snap/gnome-calculator/180
/dev/loop5 squashfs 13M 13M 0 100% /snap/gnome-characters/103
/dev/loop6 squashfs 15M 15M 0 100% /snap/gnome-logs/37
/dev/loop7 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/51
/dev/sda1 vfat 256M 85M 172M 33% /mnt/boot-sav/sda1
/dev/sda3 fuseblk 86G 55G 32G 64% /mnt/boot-sav/sda3
/dev/sda4 fuseblk 980M 517M 464M 53% /mnt/boot-sav/sda4
/dev/sda5 ext4 32G 5.2G 25G 18% /mnt/boot-sav/sda5
=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1864450048 bytes, 3641504 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 56441944-53B3-4AC8-AB75-E274A91B2B3B
Device Start End Sectors Size Type
/dev/sda1 2048 534527 532480 260M EFI System
/dev/sda2 534528 567295 32768 16M Microsoft reserved
/dev/sda3 567296 180827290 180259995 86G Microsoft basic data
/dev/sda4 248049664 250056703 2007040 980M Windows recovery environment
/dev/sda5 180828160 248049663 67221504 32.1G Linux filesystem
Partition table entries are not in disk order.
Disk /dev/sdb: 3.7 GiB, 4005560320 bytes, 7823360 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xb1313b29
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 8064 7823359 7815296 3.7G c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda5, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot use-standard-efi-file
=================== Advice in case of suggested repair
Please disable SecureBoot in the BIOS. Then try again.Do you want to continue?
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!
If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.
Ton Ubuntu est parfaitement installé. C'est seulement que HP - le fabricant de ton ordi - verrouille le démarrage sur Windows. Pour parvenir à démarrer Ubuntu, il faut presser la touche F9 au démarrage de l'ordi pour faire apparaître le Boot Menu dans lequel tu trouveras une entrée désignée "ubuntu".
Hors ligne
#15 Le 28/08/2018, à 19:42
- Speakers
Re : [Résolu] Installer Linux sur HP: bonne idée?
Bonsoir,
Merci beaucoup, ça marche parfaitement, j'en ai d'ailleurs profiter pour découvrir Ubuntu. Je vais crée un autre sujet pour un problème au niveau de la connexion Wi-Fi.
Encore merci
Hors ligne
#16 Le 28/08/2018, à 19:54
- malbo
Re : [Résolu] Installer Linux sur HP: bonne idée?
Dans l'image que tu as collée dans le post #6, on peut lire "HP Laptop 15-bs0XX". J'ai tenté de trouver ce qu'il pouvait y avoir derrière XX mais je n'arrive pas (si tu n'avais pas caché l'ID de produit dans l'image, j'y serais peut-être parvenu mais là je sèche). Peux-tu donner le nom complet de ton modèle ? Cela me servira pour rentrer ton modèle dans la Liste des portables HP
Dernière modification par malbo (Le 28/08/2018, à 19:54)
Hors ligne
#17 Le 01/09/2018, à 18:44
- Speakers
Re : [Résolu] Installer Linux sur HP: bonne idée?
Bonjour,
Nom du produit: HP Laptop 15-bs0xx
Numéro de série: //
Numéro de produit: confidentiel je crois (si ça ne l'est pas je peux le communiquer)
Ce sont les seuls informations que j'ai à disposition
Dernière modification par Speakers (Le 01/09/2018, à 20:32)
Hors ligne
#18 Le 01/09/2018, à 19:45
- malbo
Re : [Résolu] Installer Linux sur HP: bonne idée?
Non, c'est le numéro de série qui pourrait être considéré comme confidentiel. Le numéro de produit n'est pas confidentiel et je te prie de le donner dans ta réponse.
Hors ligne
#19 Le 01/09/2018, à 20:33
- Speakers
Re : [Résolu] Installer Linux sur HP: bonne idée?
Nom du produit: HP Laptop 15-bs0xx
Numéro de série: //
Numéro de produit: 1ZL65EA#UUG
Hors ligne
#20 Le 02/09/2018, à 06:07
- malbo
Re : [Résolu] Installer Linux sur HP: bonne idée?
Merci. Après recherche dans Google sur 1ZL65EA#UUG, j'ai trouvé cette page : https://www.mediamarkt.be/fr/product/_h … 73742.html
On y voit que le nom complet de ton modèle est HP 15-bs007nb et qu'il est équipé d'un processeur Intel Pentium N3710. La partie graphique "Intel HD 405" (ou "Intel HD Graphics 405") est intégrée sur la même puce que le processeur. Il n'y a pas de carte graphique dédiée.
EDIT : je viens d'ajouter ton modèle 15-bs007nb dans la Liste des portables HP
Dernière modification par malbo (Le 02/09/2018, à 06:29)
Hors ligne
#21 Le 11/09/2018, à 12:50
- papy104
Re : [Résolu] Installer Linux sur HP: bonne idée?
Malbo a ecrit:
"Ton Ubuntu est parfaitement installé. C'est seulement que HP - le fabricant de ton ordi - verrouille le démarrage sur Windows. Pour parvenir à démarrer Ubuntu, il faut presser la touche F9 au démarrage de l'ordi pour faire apparaître le Boot Menu dans lequel tu trouveras une entrée désignée "ubuntu"."
Est ce que cela veut dire qu'à chaque lancement du PC il faut presser sur F9?
Je suis intéressé par la question car j'ai un Laptop HP (LAPTOP PNKEKA 78 ; Processeur I5) semblable et je veux me faire installer Ubuntu MATE prochainement
Papy
Jeune depuis très longtemps!
Ubuntu 22.04 MATE et pas vaillant en lignes de commande
Hors ligne
#22 Le 17/09/2018, à 08:15
- malbo
Re : [Résolu] Installer Linux sur HP: bonne idée?
Est ce que cela veut dire qu'à chaque lancement du PC il faut presser sur F9?
Oui, c'est la procédure la plus généralement employée (*). Toutefois, on trouve des cas où le démarrage par défaut d'un ordi HP se fait sur Ubuntu sans qu'aucune manip particulière n'ait été faite par la personne qui a fait l'install. Et on trouve aussi des cas où on obtient ce démarrage par défaut sur Ubuntu après un certain paramétrage du "Bios" (exemple ici). En fait, ça dépend des modèles de HP.
(*) fais une recherche des occurrences de F9 sur la page Liste des portables de la marque Hewlett Packard : tu verras que c'est la majorité des cas.
Dernière modification par malbo (Le 17/09/2018, à 08:23)
Hors ligne