Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 14/09/2018, à 20:56

flo71

Disque dur externe WD10JMVW 1To impossible à monter

Bonjour,

je n'arrive plus à monter mon DD sous ubuntu ou autre (TV ...).
le DD bip et la tête de lecture au début quand je le branche (ça sent mauvais).

Résultat de différentes manip :

sudo smartctl -s on -d ata -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.15.0-24-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

Read Device Identity failed: Invalid argument

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

sudo smartctl -s on -d sat -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.15.0-24-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   [No Information Found]
Local Time is:    Fri Sep 14 18:40:11 2018 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

sudo smartctl -s on -d scsi -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.15.0-24-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              Elements 10A2
Revision:             1033
Compliance:           SPC-4
Serial number:        
Device type:          disk
Local Time is:        Fri Sep 14 18:41:26 2018 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
unable to fetch IEC (SMART) mode page [medium or hardware error (serious)]
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

sudo smartctl -s on -d auto -T verypermissive -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.15.0-24-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   [No Information Found]
Local Time is:    Fri Sep 14 18:42:10 2018 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
                  Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
Read SMART Data failed: scsi error aborted command


=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Read SMART Error Log failed: Connection timed out

Read SMART Self-test Log failed: Connection timed out

Selective Self-tests/Logging not supported

sudo smartctl -s on -d test -T verypermissive -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.15.0-24-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

/dev/sdb [SAT]: Device of type 'sat' [ATA] detected
/dev/sdb [SAT]: Device of type 'sat' [ATA] opened

Merci d'avance pour votre réponse


Modération : merci d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 14/09/2018, à 21:10)


Google est ton ami

Hors ligne