Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 23/09/2018, à 12:34

Steph2811

[Résolu] Install réussie Lenovo Ideapad 120S

Bonjour,
Pour partage, je viens d'acquérir un Lenovo Ideapad 120S 14IAP. Ne le trouvant pas dans la liste des portables Lenovo, je me permet de faire un retour sur l'installation.
Le modèle exact est :
Ideapad 120S-14IAP
Intel Pentium N4200 1.1 GHz x4
4Go de RAM
SSD 128 Go
Intel HD Graphics 505
Il était pré-équipé Windows 10.
Au premier démarrage, je suis entré dans l'UEFI (touche F2 sur ce modèle) pour désactiver le secure boot et changer l'ordre du boot pour mettre l'USB en premier. Lancement immédiat d'une session USB Live qui n'a pas montré de problème.
Donc installation d'Ubuntu 18.04.01 dans la foulée en virant en même temps Windows 10 dont je n'ai pas besoin. Aucun souci rencontré. Testé à peu près tout sans aucun problème.

Voilà, j'espère que cela sera utile. Si c'est ok pour vous, je mettrais en [résolu]

Merci et à bientôt

Dernière modification par Steph2811 (Le 23/09/2018, à 13:18)

Hors ligne

#2 Le 23/09/2018, à 12:38

nam1962

Re : [Résolu] Install réussie Lenovo Ideapad 120S

Sympa wink
Pour info, peux tu donner :

sudo dmidecode -t 16
sudo dmidecode -t 17

Sinon, tu peux améliorer l'usage de la RAM avec :

echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-swappiness.conf
echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf
sudo sysctl -p /etc/sysctl.d/99-swappiness.conf

Dernière modification par nam1962 (Le 23/09/2018, à 12:39)


[ Modéré ]

Hors ligne

#3 Le 23/09/2018, à 12:41

Nuliel

Re : [Résolu] Install réussie Lenovo Ideapad 120S

Bonjour,

Ne le trouvant pas dans la liste des portables Lenovo, je me permet de faire un retour sur l'installation.

Excellente idée, il est maintenant dans la liste

Tu peux faire un boot info

Dernière modification par Nuliel (Le 23/09/2018, à 12:47)

Hors ligne

#4 Le 23/09/2018, à 13:15

Steph2811

Re : [Résolu] Install réussie Lenovo Ideapad 120S

Merci à tous les deux pour vos retours rapides !

A Naziel, voici le boot-info

A Nam1962, pour voici les retours pour dmidecode -t 16 :

# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present

Handle 0x0004, DMI type 16 , 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Connection Type: None
Maximum Capacity: 8Gb
Error Information Handle: Not Provided
Number Of Devices: 2

Et pour dmidecode -t 17 :

# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.

Handle 0x0005, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0004
	Error Information Handle: Not Provided
	Total Width: 8 bits
	Data Width: 8 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: ChannelA-DIMM0
	Bank Locator: BANK 0
	Type: LPDDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Micron
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: MT53B256M32D1NP-062AIT:C
	Rank: Unknown
	Configured Clock Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: Unknown

Handle 0x0006, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0004
	Error Information Handle: Not Provided
	Total Width: 8 bits
	Data Width: 8 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: ChannelB-DIMM0
	Bank Locator: BANK 1
	Type: LPDDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Micron
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: MT53B256M32D1NP-062AIT:C
	Rank: Unknown
	Configured Clock Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: Unknown

Pour mon info perso, cela sert à quoi exactement ? (je suis ignare mais je cherche à m'améliorer wink

Et merci pour l'astuce pour la RAM.

Hors ligne

#5 Le 23/09/2018, à 13:21

Nuliel

Re : [Résolu] Install réussie Lenovo Ideapad 120S

Hop, le boot info

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   250,069,679   250,069,679  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624   250,068,991   249,018,368 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop10                                             squashfs   
/dev/loop11                                             squashfs   
/dev/loop12                                             squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/loop8                                              squashfs   
/dev/loop9                                              squashfs   
/dev/sda1        E959-731E                              vfat       
/dev/sda2        fc9c3c90-cdb2-4dbb-ae49-6da9067bb260   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Sep 23 13:59 ata-HFS128G39TND-N210A_ES85N82611MA0613T -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 23 13:59 ata-HFS128G39TND-N210A_ES85N82611MA0613T-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 23 13:59 ata-HFS128G39TND-N210A_ES85N82611MA0613T-part2 -> ../../sda2
lrwxrwxrwx 1 root root  9 Sep 23 13:59 wwn-0x5000000000000000 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 23 13:59 wwn-0x5000000000000000-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 23 13:59 wwn-0x5000000000000000-part2 -> ../../sda2

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


========================== sda1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 root hd0,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
else
  search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
	else
	  search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
	fi
        linux	/boot/vmlinuz-4.15.0-34-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-34-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
	menuentry 'Ubuntu, avec Linux 4.15.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-34-generic-advanced-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
		else
		  search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
		fi
		echo	'Chargement de Linux 4.15.0-34-generic…'
	        linux	/boot/vmlinuz-4.15.0-34-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-34-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-34-generic-recovery-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
		else
		  search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
		fi
		echo	'Chargement de Linux 4.15.0-34-generic…'
	        linux	/boot/vmlinuz-4.15.0-34-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-34-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
		else
		  search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-fc9c3c90-cdb2-4dbb-ae49-6da9067bb260' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
		else
		  search --no-floppy --fs-uuid --set=root fc9c3c90-cdb2-4dbb-ae49-6da9067bb260
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=E959-731E  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  92.760288239 = 99.600601088   boot/grub/grub.cfg                             3
  36.641826630 = 39.343861760   boot/vmlinuz-4.15.0-29-generic                 1
   4.848518372 = 5.206056960    boot/vmlinuz-4.15.0-34-generic                 1
  36.641826630 = 39.343861760   vmlinuz                                        1
   8.645320892 = 9.282842624    boot/initrd.img-4.15.0-29-generic              3
   5.974552155 = 6.415126528    boot/initrd.img-4.15.0-34-generic              3
   8.645320892 = 9.282842624    initrd.img                                     3
   8.645320892 = 9.282842624    initrd.img.old                                 3


ADDITIONAL INFORMATION :
=================== log of boot-info 20180923_1359 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=fc9c3c90-cdb2-4dbb-ae49-6da9067bb260 ro quiet splash vt.handoff=1

=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 18.04.1 LTS CurrentSession:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="E959-731E" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="e2cdb18a-2439-47ff-a07d-cc88e6a0f26c"
/dev/sda2: UUID="fc9c3c90-cdb2-4dbb-ae49-6da9067bb260" TYPE="ext4" PARTUUID="eb677ab2-a520-4545-b263-adfb14578127"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 sept. 22 16:23 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 17 20:13 00_header
-rwxr-xr-x 1 root root  6258 juil. 16 17:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 20:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 20:13 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 20:13 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 17 20:13 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 17 20:13 40_custom
-rwxr-xr-x 1 root root   216 juil. 17 20:13 41_custom
-rw-r--r-- 1 root root   483 juil. 17 20:13 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=E959-731E   (sda1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : command substitution: ignored null byte in input

=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0016,0012,0013,0014,0015,0017,0018,001A,0019
Boot0000* ubuntu	HD(1,GPT,e2cdb18a-2439-47ff-a07d-cc88e6a0f26c,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0010  Setup	FvFile(721c8b66-426c-4e86-8e99-3457c46ab0b9)
Boot0011  Boot Menu	FvFile(86488440-41bb-42c7-93ac-450fbf7766bf)
Boot0012* SATA SSD: HFS128G39TND-N210A                      	PciRoot(0x0)/Pci(0x12,0x0)/Sata(1,0,0)..bYVD.A...O.*..
Boot0013* eMMC Card:	VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,63a04a38d7705b4888c69653c982e11401)
Boot0014* SATA HDD:	VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,91af625956449f41a7b91f4f892ab0f600)
Boot0015* ATAPI CD:	VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,aea2090adfde214e8b3a5e471856a354)
Boot0016* USB HDD: Philips USB Flash Drive	PciRoot(0x0)/Pci(0x15,0x0)/USB(4,0)3.!..3.G..A.....
Boot0017* USB CD:	VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,86701296aa5a7848b66cd49dd3ba6a55)
Boot0018* PCI LAN:	VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,78a84aaf2b2afc4ea79cf5cc8f3d3803)
Boot0019* USB LAN:	VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,e854bca4cae7704ca322b00da0376322)
Boot001A* USB FDD:	VenMsg(bc7838d2-0f82-4d60-8316-c068ee79d25b,6ff015a28830b543a8b8641009461e49)

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /boot/efi.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:128GB:scsi:512:512:gpt:ATA HFS128G39TND-N21:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:128GB:127GB:ext4::;

=================== lsblk:
KNAME  TYPE FSTYPE     SIZE LABEL
loop0  loop squashfs  86,9M
loop1  loop squashfs    13M
loop2  loop squashfs    13M
loop3  loop squashfs  14,5M
loop4  loop squashfs  87,9M
loop5  loop squashfs  14,5M
loop6  loop squashfs  42,1M
loop7  loop squashfs   3,7M
loop8  loop squashfs   2,3M
loop9  loop squashfs   2,3M
loop10 loop squashfs 140,9M
loop11 loop squashfs   3,7M
loop12 loop squashfs  34,7M
sda    disk          119,2G
sda1   part vfat       512M
sda2   part ext4     118,8G

KNAME  ROTA RO RM STATE   MOUNTPOINT
loop0     1  1  0         /snap/core/4917
loop1     1  1  0         /snap/gnome-characters/124
loop2     1  1  0         /snap/gnome-characters/103
loop3     1  1  0         /snap/gnome-logs/43
loop4     1  1  0         /snap/core/5328
loop5     1  1  0         /snap/gnome-logs/37
loop6     1  1  0         /snap/gtk-common-themes/701
loop7     1  1  0         /snap/gnome-system-monitor/57
loop8     1  1  0         /snap/gnome-calculator/180
loop9     1  1  0         /snap/gnome-calculator/238
loop10    1  1  0         /snap/gnome-3-26-1604/70
loop11    1  1  0         /snap/gnome-system-monitor/51
loop12    1  1  0         /snap/gtk-common-themes/319
sda       0  0  0 running
sda1      0  0  0         /boot/efi
sda2      0  0  0         /


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1903132k,nr_inodes=475783,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=386680k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=11097)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_124.snap on /snap/gnome-characters/124 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_5328.snap on /snap/core/5328 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/var/lib/snapd/snaps/gnome-logs_43.snap on /snap/gnome-logs/43 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_701.snap on /snap/gtk-common-themes/701 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_57.snap on /snap/gnome-system-monitor/57 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_238.snap on /snap/gnome-calculator/238 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=386680k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered):  acpi_thermal_rel autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse gpiochip0 gpiochip1 gpiochip2 gpiochip3 hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 00 04 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 1e 73 59 e9 4e  4f 20 4e 41 4d 45 20 20  |..).sY.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     378M  1.7M  377M   1% /run
/dev/sda2      ext4      117G  8.7G  102G   8% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/loop0     squashfs   87M   87M     0 100% /snap/core/4917
/dev/loop1     squashfs   13M   13M     0 100% /snap/gnome-characters/124
/dev/loop2     squashfs   13M   13M     0 100% /snap/gnome-characters/103
/dev/loop4     squashfs   88M   88M     0 100% /snap/core/5328
/dev/sda1      vfat      511M  4.7M  507M   1% /boot/efi
/dev/loop3     squashfs   15M   15M     0 100% /snap/gnome-logs/43
/dev/loop5     squashfs   15M   15M     0 100% /snap/gnome-logs/37
/dev/loop6     squashfs   43M   43M     0 100% /snap/gtk-common-themes/701
/dev/loop8     squashfs  2.4M  2.4M     0 100% /snap/gnome-calculator/180
/dev/loop7     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/57
/dev/loop9     squashfs  2.3M  2.3M     0 100% /snap/gnome-calculator/238
/dev/loop10    squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/70
/dev/loop11    squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/51
/dev/loop12    squashfs   35M   35M     0 100% /snap/gtk-common-themes/319
tmpfs          tmpfs     378M   28K  378M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/loop0: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 14.5 MiB, 15204352 bytes, 29696 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 87.9 MiB, 92164096 bytes, 180008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 42.1 MiB, 44183552 bytes, 86296 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 3.7 MiB, 3878912 bytes, 7576 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 119.2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: EA6439F2-6D8F-4F44-B65E-28A0ABF84969

Device       Start       End   Sectors   Size Type
/dev/sda1     2048   1050623   1048576   512M EFI System
/dev/sda2  1050624 250068991 249018368 118.8G Linux filesystem


Disk /dev/loop8: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop9: 2.3 MiB, 2355200 bytes, 4600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop10: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop11: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop12: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !


=================== User settings
The settings chosen by the user will not act on the boot.

(je le copie ici sinon il sera perdu dans un certain temps)

Les deux commandes de nam, ça sert à savoir combien de RAM on peut mettre au max dans le pc et quelles barettes on peut y mettre.

Tu peux donner le retour de

free -h

car d'après les commandes de nam, tu as 2 barettes de 1024 Mb et tu peux mettre 8 Gb de RAM max, et tu annonces au premier message avoir 4 Gb de RAM

Dernière modification par Nuliel (Le 23/09/2018, à 13:24)

Hors ligne

#6 Le 23/09/2018, à 13:46

nam1962

Re : [Résolu] Install réussie Lenovo Ideapad 120S

Naziel a écrit :

(...)

Les deux commandes de nam, ça sert à savoir combien de RAM on peut mettre au max dans le pc et quelles barettes on peut y mettre.

Tu peux donner le retour de

free -h

car d'après les commandes de nam, tu as 2 barettes de 1024 Mb et tu peux mettre 8 Gb de RAM max, et tu annonces au premier message avoir 4 Gb de RAM

+1 !

Cela sera utile et dans tous les cas, tu pourras nettement améliorer ton ordi à peu de frais en achetant des barrettes plus puissantes sur lebonc* ou pricemi*


[ Modéré ]

Hors ligne

#7 Le 23/09/2018, à 16:57

Steph2811

Re : [Résolu] Install réussie Lenovo Ideapad 120S

Ok,

Un grand merci à tous les deux pour ces infos et l'enrichissement de ma culture perso smile
Effectivement, je peux aller jusqu'à 8Gb !

A très bientôt sans doute

Hors ligne

#8 Le 23/09/2018, à 18:20

moko138

Re : [Résolu] Install réussie Lenovo Ideapad 120S

nam propose :

sudo dmidecode -t 16
sudo dmidecode -t 17

- -

moko propose :
     RAM que la carte-mère peut supporter. Merci de montrer :

sudo dmidecode -t 5
sudo dmidecode -t 16

     RAM présente. Merci de montrer :

sudo dmidecode -t 6
sudo dmidecode -t 17

Ou bien, pour rediriger les 4 retours dans un fichier (ici nommé "memory-test.txt") du home :

cd ; echo "          RAM POSSIBLE" > memory-test.txt ; echo "dmidecode -t 5" >> memory-test.txt ; sudo dmidecode -t 5 >> memory-test.txt ; echo >> memory-test.txt ; echo "dmidecode -t 16" >> memory-test.txt ; sudo dmidecode -t 16 >> memory-test.txt ; echo "                = = = =" >> memory-test.txt ; echo >> memory-test.txt ; echo "          RAM DÉTECTÉE" >> memory-test.txt ; echo "dmidecode -t 6" >> memory-test.txt ; sudo dmidecode -t 6 >> memory-test.txt ; echo >> memory-test.txt ; echo "dmidecode -t 17" >> memory-test.txt ; sudo dmidecode -t 17 >> memory-test.txt

Ce qui donne

          RAM POSSIBLE
dmidecode -t 5
# dmidecode 2.11
SMBIOS 2.5 present.

Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
	Error Detecting Method: 64-bit ECC
	Error Correcting Capabilities:
		None
	Supported Interleave: One-way Interleave
	Current Interleave: One-way Interleave
	Maximum Memory Module Size: 4096 MB
	Maximum Total Memory Size: 8192 MB
	Supported Speeds:
		70 ns
		60 ns
		50 ns
	Supported Memory Types:
		Standard
		DIMM
	Memory Module Voltage: 2.9 V
	Associated Memory Slots: 2
		0x0006
		0x0007
	Enabled Error Correcting Capabilities: None


dmidecode -t 16
# dmidecode 2.11
SMBIOS 2.5 present.

Handle 0x0013, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 8 GB
	Error Information Handle: Not Provided
	Number Of Devices: 2

                = = = =

          RAM DÉTECTÉE
dmidecode -t 6
# dmidecode 2.11
SMBIOS 2.5 present.

Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: A0
	Bank Connections: 0 1
	Current Speed: Unknown
	Type: Other Unknown EDO
	Installed Size: 2048 MB (Double-bank Connection)
	Enabled Size: 2048 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: A1
	Bank Connections: 2 3
	Current Speed: Unknown
	Type: Other Unknown EDO
	Installed Size: 2048 MB (Double-bank Connection)
	Enabled Size: 2048 MB (Double-bank Connection)
	Error Status: OK


dmidecode -t 17
# dmidecode 2.11
SMBIOS 2.5 present.

Handle 0x0014, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0013
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: A0
	Bank Locator: Bank0/1
	Type: DDR2
	Type Detail: None
	Speed: 2048 MHz
	Manufacturer: None
	Serial Number: None
	Asset Tag: None
	Part Number: None

Handle 0x0015, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0013
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: A1
	Bank Locator: Bank2/3
	Type: DDR2
	Type Detail: None
	Speed: 2048 MHz
	Manufacturer: None
	Serial Number: None
	Asset Tag: None
	Part Number: None

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#9 Le 23/09/2018, à 18:54

nam1962

Re : [Résolu] Install réussie Lenovo Ideapad 120S

Tiens, j'ai :

~]$ sudo dmidecode -t 5
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.

~]$

Comment l'interpréter ?

Dernière modification par nam1962 (Le 23/09/2018, à 18:55)


[ Modéré ]

Hors ligne

#10 Le 24/09/2018, à 17:49

Steph2811

Re : [Résolu] Install réussie Lenovo Ideapad 120S

@ Naziel :
Oups désolé, j'avais oublié de te donner le retour que tu demandais pour free -h

              total       utilisé      libre     partagé tamp/cache   disponible
Mem:           3,7G        1,2G        553M        243M        2,0G        2,0G
Partition d'échange:        2,0G          0B        2,0G

@ Moko, voici les 4 retours :

          RAM POSSIBLE
dmidecode -t 5
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.


dmidecode -t 16
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.

Handle 0x0004, DMI type 16, 23 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 8 GB
	Error Information Handle: Not Provided
	Number Of Devices: 2

                = = = =

          RAM DÉTECTÉE
dmidecode -t 6
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.


dmidecode -t 17
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.

Handle 0x0005, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0004
	Error Information Handle: Not Provided
	Total Width: 8 bits
	Data Width: 8 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: ChannelA-DIMM0
	Bank Locator: BANK 0
	Type: LPDDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Micron
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: MT53B256M32D1NP-062AIT:C
	Rank: Unknown
	Configured Clock Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: Unknown

Handle 0x0006, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0004
	Error Information Handle: Not Provided
	Total Width: 8 bits
	Data Width: 8 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: ChannelB-DIMM0
	Bank Locator: BANK 1
	Type: LPDDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Micron
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: MT53B256M32D1NP-062AIT:C
	Rank: Unknown
	Configured Clock Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: Unknown

Handle 0x0007, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0004
	Error Information Handle: Not Provided
	Total Width: 8 bits
	Data Width: 8 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: ChannelC-DIMM0
	Bank Locator: BANK 2
	Type: LPDDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Micron
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: MT53B256M32D1NP-062AIT:C
	Rank: Unknown
	Configured Clock Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: Unknown

Handle 0x0008, DMI type 17, 40 bytes
Memory Device
	Array Handle: 0x0004
	Error Information Handle: Not Provided
	Total Width: 8 bits
	Data Width: 8 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: ChannelD-DIMM0
	Bank Locator: BANK 3
	Type: LPDDR4
	Type Detail: Synchronous
	Speed: 2133 MT/s
	Manufacturer: Micron
	Serial Number: 00000000
	Asset Tag: 9876543210
	Part Number: MT53B256M32D1NP-062AIT:C
	Rank: Unknown
	Configured Clock Speed: 2133 MT/s
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: Unknown

Voilà pour les retours.
Et quelle est la signification ? Je persiste à m'améliorer smile

Hors ligne

#11 Le 25/09/2018, à 03:29

moko138

Re : [Résolu] Install réussie Lenovo Ideapad 120S

nam1962 a écrit :

Tiens, j'ai :

~]$ sudo dmidecode -t 5
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.

~]$

Comment l'interpréter ?

Que toutes les tables DMI ne sont pas encodées à l'identique !
C'est pourquoi un grep tel-mot peut fonctionner sur un pc et donner un retour vide sur un autre.

Que donne chez toi

sudo dmidecode | grep -iC 11 "Supported Speeds:"

?

Sinon, le man contient plein d'astuces. Comme

sudo dmidecode -d /dev/mem

mais c'est très bavard ! (plus de 400 lignes, chez moi)

Ou encore

sudo dmidecode -t 19,20

ou simplement :

sudo dmidecode -t memory

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne