[résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

Gog · Le 08/01/2020, à 21:27

Je mange un bout. Je continue après

moko138 · Le 08/01/2020, à 21:41

Naziel a écrit :

setxkbmap fr
loadkeys fr
(l'un des deux te permettra d'avoir un agencement AZERTY, mais lequel...)

Pour passer de qwerty en azerty :
dans un terminal, taper au clavier :

setxkb,qp fr

en sorte d'obtenir à l'écran:

setxkbmap fr

.
Et si on est en tty/console, taper au clavier :

loqdkeys fr

en sorte d'obtenir à l'écran:

loadkeys fr

Gog · Le 08/01/2020, à 22:22

Pour sortir, un

shutdown -P now

ne fonctionne pas non plus.
Je fais un

exit

qui lui fonctionne.

@moko. Le clavier fonctionne bien en AZERTY. Merci

Ça marche enfin.

Merci!!!!!!!!

Je laisse ouvert le sujet encore un peu. Pour faire tester à la propriétaire. Et en fonction de ses retours, je clôturerai (si j'oublie pas #je suis Doris)

Nuliel · Le 08/01/2020, à 23:38

@moko138: merci pour la précision, du coup c'est loadkeys fr qui était utile

Gog · Le 09/01/2020, à 19:11

Bonjour,

Je reviens vers vous.
L'ordinateur m'a fait le coup de l'écran noir sans vouloir démarrer, 3 fois. Suis passé pour un ...:lol:
J'avais oublié de modifier l'ordre de voit. Mais même après la modification. Le problème apparaît de manière aléatoire.

Juste après la modification, il s'est allumé seulement elle le trouve trop long au démarrage.
L'apparition du GRUB est presque instantanée, après l'écran packard-bell, mais ensuite c'est c effectivement assez long.

Et donc j'ai repris l'ordinateur, j'essaie de l'allumer, et là, ré écran noir après le GRUB

Avant d'essayer d'accélérer le démarrage, j'aimerai comprendre pourquoi j'ai un écran noir parfois.

Je suis sur mon smartphone, dès qu'il veut bien s'allumer, je vous mets le boot info

Nuliel · Le 09/01/2020, à 19:14

L'ordinateur m'a fait le coup de l'écran noir sans vouloir démarrer, 3 fois

C'est les aléa du direct

Tu peux faire un boot info depuis une session live (il s'allume direct en session live?)

Gog · Le 09/01/2020, à 19:18

Après 3 nouveaux écran noir, il s'est allumé, mais le touchpad ne fonctionne plus. C'est la première fois que ça arrive
Je n'ai pas essayé avec le livedvd.

Le boot-info depuis une session normale. C'est pareil que depuis le live ?
http://paste.ubuntu.com/p/2BrKn46c8t/

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/Boot/bkpbootx64.efi 
                       /EFI/Boot/bootx64.efi /EFI/Boot/fbx64.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi 
                       /EFI/OEM/Boot/bootmgfw.efi /EFI/OEM/Boot/bootmgr.efi 
                       /EFI/OEM/Boot/memtest.efi 
                       /boot-repair/log/20200105_200150/sda2/bootx64.efi

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/sda3: unknown filesystem type ''.

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1      R          2,048       821,247       819,200 Windows Recovery Environment (Windows)
/dev/sda2               821,248     1,435,647       614,400 EFI System partition
/dev/sda3             1,435,648     1,697,791       262,144 Microsoft Reserved Partition (Windows)
/dev/sda4             1,697,792   970,518,907   968,821,116 Data partition (Windows/Linux)
/dev/sda5      R  1,917,153,280 1,917,870,079       716,800 Windows Recovery Environment (Windows)
/dev/sda6      R  1,917,870,080 1,953,523,711    35,653,632 Windows Recovery Environment (Windows)
/dev/sda7           970,520,576 1,917,153,279   946,632,704 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        2C9C470F9C46D34E                       ntfs       Recovery
/dev/sda2        1649-8F38                              vfat       ESP
/dev/sda3                                                          
/dev/sda4        C40C4BC00C4BABEC                       ntfs       Packard Bell
/dev/sda5        8A2E3DC12E3DA75B                       ntfs       
/dev/sda6        56684E48684E2759                       ntfs       Push Button Reset
/dev/sda7        b204c638-a907-4bd1-be15-e01e41bc733d   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan  9 18:20 ata-MATSHITA_DVD-RAM_UJ8E1_SED0516850 -> ../../sr0
lrwxrwxrwx 1 root root  9 Jan  9 18:25 ata-TOSHIBA_MQ01ABD100_Z2R1P24WT -> ../../sda
lrwxrwxrwx 1 root root 10 Jan  9 18:26 ata-TOSHIBA_MQ01ABD100_Z2R1P24WT-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan  9 18:25 ata-TOSHIBA_MQ01ABD100_Z2R1P24WT-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan  9 18:25 ata-TOSHIBA_MQ01ABD100_Z2R1P24WT-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan  9 18:26 ata-TOSHIBA_MQ01ABD100_Z2R1P24WT-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jan  9 18:26 ata-TOSHIBA_MQ01ABD100_Z2R1P24WT-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jan  9 18:26 ata-TOSHIBA_MQ01ABD100_Z2R1P24WT-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Jan  9 18:25 ata-TOSHIBA_MQ01ABD100_Z2R1P24WT-part7 -> ../../sda7
lrwxrwxrwx 1 root root  9 Jan  9 18:25 wwn-0x50000394721884bd -> ../../sda
lrwxrwxrwx 1 root root 10 Jan  9 18:26 wwn-0x50000394721884bd-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan  9 18:25 wwn-0x50000394721884bd-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan  9 18:25 wwn-0x50000394721884bd-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan  9 18:26 wwn-0x50000394721884bd-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Jan  9 18:26 wwn-0x50000394721884bd-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Jan  9 18:26 wwn-0x50000394721884bd-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Jan  9 18:25 wwn-0x50000394721884bd-part7 -> ../../sda7

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda2        /boot/efi                vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda7        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


========================== sda2/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid b204c638-a907-4bd1-be15-e01e41bc733d root hd0,gpt7 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda7/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  b204c638-a907-4bd1-be15-e01e41bc733d
else
  search --no-floppy --fs-uuid --set=root b204c638-a907-4bd1-be15-e01e41bc733d
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b204c638-a907-4bd1-be15-e01e41bc733d' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt7'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  b204c638-a907-4bd1-be15-e01e41bc733d
	else
	  search --no-floppy --fs-uuid --set=root b204c638-a907-4bd1-be15-e01e41bc733d
	fi
        linux	/boot/vmlinuz-4.15.0-74-generic root=UUID=b204c638-a907-4bd1-be15-e01e41bc733d ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-74-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-b204c638-a907-4bd1-be15-e01e41bc733d' {
	menuentry 'Ubuntu, avec Linux 4.15.0-74-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-74-generic-advanced-b204c638-a907-4bd1-be15-e01e41bc733d' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt7'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  b204c638-a907-4bd1-be15-e01e41bc733d
		else
		  search --no-floppy --fs-uuid --set=root b204c638-a907-4bd1-be15-e01e41bc733d
		fi
		echo	'Chargement de Linux 4.15.0-74-generic…'
	        linux	/boot/vmlinuz-4.15.0-74-generic root=UUID=b204c638-a907-4bd1-be15-e01e41bc733d ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-74-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-74-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-74-generic-recovery-b204c638-a907-4bd1-be15-e01e41bc733d' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt7'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  b204c638-a907-4bd1-be15-e01e41bc733d
		else
		  search --no-floppy --fs-uuid --set=root b204c638-a907-4bd1-be15-e01e41bc733d
		fi
		echo	'Chargement de Linux 4.15.0-74-generic…'
	        linux	/boot/vmlinuz-4.15.0-74-generic root=UUID=b204c638-a907-4bd1-be15-e01e41bc733d ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-74-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-72-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-72-generic-advanced-b204c638-a907-4bd1-be15-e01e41bc733d' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt7'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  b204c638-a907-4bd1-be15-e01e41bc733d
		else
		  search --no-floppy --fs-uuid --set=root b204c638-a907-4bd1-be15-e01e41bc733d
		fi
		echo	'Chargement de Linux 4.15.0-72-generic…'
	        linux	/boot/vmlinuz-4.15.0-72-generic root=UUID=b204c638-a907-4bd1-be15-e01e41bc733d ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-72-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-72-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-72-generic-recovery-b204c638-a907-4bd1-be15-e01e41bc733d' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt7'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  b204c638-a907-4bd1-be15-e01e41bc733d
		else
		  search --no-floppy --fs-uuid --set=root b204c638-a907-4bd1-be15-e01e41bc733d
		fi
		echo	'Chargement de Linux 4.15.0-72-generic…'
	        linux	/boot/vmlinuz-4.15.0-72-generic root=UUID=b204c638-a907-4bd1-be15-e01e41bc733d ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-72-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "Windows UEFI bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 1649-8F38
chainloader (${root})/EFI/Microsoft/Boot/bootmgfw.efi
}

menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root 1649-8F38
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}

menuentry "Windows Boot UEFI fbx64.efi" {
search --fs-uuid --no-floppy --set=root 1649-8F38
chainloader (${root})/EFI/Boot/fbx64.efi
}

menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 1649-8F38
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}

menuentry "EFI/ubuntu/mmx64.efi" {
search --fs-uuid --no-floppy --set=root 1649-8F38
chainloader (${root})/EFI/ubuntu/mmx64.efi
}

menuentry "EFI/OEM/Boot/bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 1649-8F38
chainloader (${root})/EFI/OEM/Boot/bootmgfw.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-1649-8F38' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  1649-8F38
	else
	  search --no-floppy --fs-uuid --set=root 1649-8F38
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda7/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda7 during installation
UUID=b204c638-a907-4bd1-be15-e01e41bc733d /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda2 during installation
#UUID=1649-8F38  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0
UUID=1649-8F38	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda7: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 556.906726837 = 597.974044672  boot/grub/grub.cfg                             2
 491.944313049 = 528.221184000  boot/vmlinuz-4.15.0-72-generic                 1
 493.709938049 = 530.117009408  boot/vmlinuz-4.15.0-74-generic                 1
 493.709938049 = 530.117009408  vmlinuz                                        1
 491.944313049 = 528.221184000  vmlinuz.old                                    1
 494.160701752 = 530.601013248  boot/initrd.img-4.15.0-72-generic              4
 492.819461823 = 529.160867840  boot/initrd.img-4.15.0-74-generic              3
 492.819461823 = 529.160867840  initrd.img                                     3
 494.160701752 = 530.601013248  initrd.img.old                                 4


ADDITIONAL INFORMATION :
=================== log of boot-info 20200109_1825 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.3 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-74-generic root=UUID=b204c638-a907-4bd1-be15-e01e41bc733d ro quiet splash vt.handoff=1

=================== os-prober:
/dev/sda7:L'OS actuellement utilisé - Ubuntu 18.04.3 LTS CurrentSession:linux
/dev/sda2@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi

=================== blkid:
/dev/sda1: LABEL="Recovery" UUID="2C9C470F9C46D34E" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="7f012617-5d22-41cb-86f5-7553182b7049"
/dev/sda2: LABEL="ESP" UUID="1649-8F38" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="07c2b64b-f3cb-465e-ac67-93cfd698de85"
/dev/sda4: LABEL="Packard Bell" UUID="C40C4BC00C4BABEC" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="937a691f-336f-450f-9e7e-35cbf5a546f7"
/dev/sda5: UUID="8A2E3DC12E3DA75B" TYPE="ntfs" PARTUUID="5c7929ab-da95-4627-b8a6-be55dc5bb838"
/dev/sda6: LABEL="Push Button Reset" UUID="56684E48684E2759" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="33ea73bc-34df-4f67-b65b-04a8a34fe68f"
/dev/sda7: UUID="b204c638-a907-4bd1-be15-e01e41bc733d" TYPE="ext4" PARTUUID="8bcba85b-7387-4b8b-8457-c3038eb59778"
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="b5545be9-f09a-4bf2-aca2-d8d94ad4eb24"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda4.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 janv.  5 21:05 grub.d
total 84
-rwxr-xr-x 1 root root 10046 nov.  11 06:52 00_header
-rwxr-xr-x 1 root root  6258 juil. 16  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17  2018 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root   857 janv.  5 21:05 25_custom
-rwxr-xr-x 1 root root 12059 juil. 17  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 17  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 17  2018 40_custom
-rwxr-xr-x 1 root root   216 juil. 17  2018 41_custom
-rw-r--r-- 1 root root   483 juil. 17  2018 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda7: UUID=1649-8F38	 (sda2)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bkpbootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
Presence of bkp file detected: /boot/efi/EFI/Boot/bkpbootx64.efi

=================== efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0000,0001
Boot0000* HDD0: 	HD(2,GPT,07c2b64b-f3cb-465e-ac67-93cfd698de85,0xc8800,0x96000)/File(EFIubuntugrubx64.efi)RC
Boot0001* Windows Boot Manager	HD(2,GPT,07c2b64b-f3cb-465e-ac67-93cfd698de85,0xc8800,0x96000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0002* ubuntu	HD(2,GPT,07c2b64b-f3cb-465e-ac67-93cfd698de85,0xc8800,0x96000)/File(EFIubuntushimx64.efi)

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sda7	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /boot/efi.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda5.
sda6	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda6.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA TOSHIBA MQ01ABD1:;
1:1049kB:420MB:419MB:ntfs:Basic data partition:hidden, diag;
2:420MB:735MB:315MB:fat32:EFI system partition:boot, esp;
3:735MB:869MB:134MB::Microsoft reserved partition:msftres;
4:869MB:497GB:496GB:ntfs:Basic data partition:msftdata;
7:497GB:982GB:485GB:ext4::;
5:982GB:982GB:367MB:ntfs::hidden, diag;
6:982GB:1000GB:18.3GB:ntfs:Basic data partition:hidden, diag;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        931,5G
sda1  part ntfs     400M Recovery
sda2  part vfat     300M ESP
sda3  part          128M
sda4  part ntfs     462G Packard Bell
sda5  part ntfs     350M
sda6  part ntfs      17G Push Button Reset
sda7  part ext4   451,4G
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /boot/efi
sda3     1  0  0
sda4     1  0  0         /mnt/boot-sav/sda4
sda5     1  0  0         /mnt/boot-sav/sda5
sda6     1  0  0         /mnt/boot-sav/sda6
sda7     1  0  0         /
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1776116k,nr_inodes=444029,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=359704k,mode=755)
/dev/sda7 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1286)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda2 on /boot/efi type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=359700k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 7f 0c 00 00 00 00 00  |................|
00000030  55 85 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |U...............|
00000040  f6 00 00 00 01 00 00 00  4e d3 46 9c 0f 47 9c 2c  |........N.F..G.,|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 5e 1b  |.X.MSDOS5.0...^.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 0c 00  |........?.......|
00000020  00 60 09 00 51 02 00 00  00 00 00 00 02 00 00 00  |.`..Q...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 38 8f 49 16 4e  4f 20 4e 41 4d 45 20 20  |..)8.I.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 e8 19 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  78 09 bf 39 00 00 00 00  |........x..9....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  ec ab 4b 0c c0 4b 0c c4  |..........K..K..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 70 45 72  |........?....pEr|
00000020  00 00 00 00 80 00 80 00  ff ef 0a 00 00 00 00 00  |................|
00000030  aa 74 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |.t..............|
00000040  f6 00 00 00 01 00 00 00  5b a7 3d 2e c1 3d 2e 8a  |........[.=..=..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda6
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 60 50 72  |........?....`Pr|
00000020  00 00 00 00 80 00 80 00  ff 07 20 02 00 00 00 00  |.......... .....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  59 27 4e 68 48 4e 68 56  |........Y'NhHNhV|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     352M  1.4M  350M   1% /run
/dev/sda7      ext4      444G  7.7G  414G   2% /
tmpfs          tmpfs     1.8G   46M  1.7G   3% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.8G     0  1.8G   0% /sys/fs/cgroup
/dev/sda2      vfat      296M   57M  240M  20% /boot/efi
tmpfs          tmpfs     352M  8.0K  352M   1% /run/user/1000
/dev/sda1      fuseblk   400M  260M  141M  65% /mnt/boot-sav/sda1
/dev/sda4      fuseblk   462G   18G  445G   4% /mnt/boot-sav/sda4
/dev/sda5      fuseblk   350M   26M  325M   8% /mnt/boot-sav/sda5
/dev/sda6      fuseblk    18G   13G  4.8G  73% /mnt/boot-sav/sda6

=================== fdisk -l:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: C88A23A5-C6D0-4642-A1E1-0837DD5131E4

Device          Start        End   Sectors   Size Type
/dev/sda1        2048     821247    819200   400M Windows recovery environment
/dev/sda2      821248    1435647    614400   300M EFI System
/dev/sda3     1435648    1697791    262144   128M Microsoft reserved
/dev/sda4     1697792  970518907 968821116   462G Microsoft basic data
/dev/sda5  1917153280 1917870079    716800   350M Windows recovery environment
/dev/sda6  1917870080 1953523711  35653632    17G Windows recovery environment
/dev/sda7   970520576 1917153279 946632704 451.4G Linux filesystem

Partition table entries are not in disk order.




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda7, using the following options:        sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot use-standard-efi-file  restore-efi-backups


=================== Advice in case of suggested repair
Veuillez désactiver SecureBoot dans le BIOS. Puis réessayez.Voulez-vous continuer ?


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda2/efi/.../grub*.efi !

Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi


=================== User settings
The settings chosen by the user will not act on the boot.

Ce que je remarque, j'ai bien telechargé la 18.04.1 et c'est une .3. Je suppose que lors de l'installation il y a eu mise à jour.

Dernière modification par Gog (Le 09/01/2020, à 19:36)

Nuliel · Le 09/01/2020, à 19:39

Je ne sais pas pourquoi cela indique 18.04.3 mais en réalité c'est bien une 18.04.1 vu les noyaux.
Le secure boot est activé, tu n'aurais pas relancé windows depuis?

Gog · Le 09/01/2020, à 19:47

Non, pas de windows.

~$ systemd-analyze blame
         14.590s dev-sda7.device
         12.993s ufw.service
         12.155s systemd-tmpfiles-setup-dev.service
         12.075s systemd-journal-flush.service
         12.047s systemd-modules-load.service
          6.477s NetworkManager-wait-online.service
          4.322s NetworkManager.service
          3.920s udisks2.service
          3.569s tlp.service
          2.954s networkd-dispatcher.service
          2.941s snapd.service
          2.729s keyboard-setup.service
          2.209s avahi-daemon.service
          2.142s accounts-daemon.service
          2.077s ModemManager.service
          1.897s alsa-restore.service
          1.856s thermald.service
          1.681s grub-common.service
          1.496s upower.service
           921ms systemd-fsck@dev-disk-by\x2duuid-1649\x2d8F38.service
           899ms systemd-journald.service
           781ms user@1000.service
           762ms gpu-manager.service

Il vient de me refaire le coup, plusieurs écran noir planté, avant de pouvoir accéder au système.

j'ai enlevé le secure boot, puis 2 écrans noirs après 2 tentatives d'allumage, pour finalement réussir à arriver là à la 3ème tentative.

Dernière modification par Gog (Le 09/01/2020, à 20:05)

jalfan · Le 10/01/2020, à 17:54

bonjour,
Dans une situation très semblable, j'ai utilisé AntiX, et m'en suis bien trouvé (l'utilisatrice aussi ).

Gog · Le 10/01/2020, à 18:55

Bonjour,
Il est vrai qu'antix est plus léger. Mais ici je pense que j'ai du foirer quelque chose à l'installation puisque quand il veut bien s'allumer, il fonctionne correctement.
Je vais transférer le sujet vers le forum xfce.

Gog · Le 10/01/2020, à 19:03

Bonjour,

Après avoir installé xubuntu sur un pc portable, je me retrouve avec un démarrage erratique, finissant souvent par un écran noir.
Ce sujet fait suite à celui ci, dans la section installation

https://forum.ubuntu-fr.org/viewtopic.php?id=2047265

Dernière modification par Gog (Le 10/01/2020, à 19:04)

cqfd93 · Le 10/01/2020, à 19:17

Modération

Bonjour,

Inutile de créer un nouveau sujet, il suffisait de demander le déplacement du premier. Sujets fusionnés.

Gog · Le 10/01/2020, à 19:20

Bonjour,

Merci, je n'avais pas pensé à vous demander. Désolé pour le doublon.

Gog · Le 11/01/2020, à 16:08

Salut,

J'avais oublié de modifier l'ordre de boot , du coup j'ai gagné quelques secondes au démarrage en bootant en 1er sur la partition Linux. Mais j'ai toujours le problème de l'écran noir et de l'ordi planté au démarrage 3 fois sur 4.

Des idées ?

Nuliel · Le 11/01/2020, à 16:14

Quand tu dis ordi planté, y a t'il quelque chose qui s'affiche à part un écran noir? SHIFT ne donne rien? CTRL+ALT+F1 ne donne rien?

Gog · Le 11/01/2020, à 19:03

L'ordi restait figé sur un écran noir. Je n'avais pas essayé le shift ni le CTRL+ALT+F1. Et là, il démarre normalement, plusieurs fois d'affilé sans soucis.
Il y a eu une grosse mise à jour au premier démarrage.

-ENLE11BZ:~$ systemd-analyze blame
         15.746s dev-sda7.device
         13.201s systemd-journal-flush.service
         12.508s ufw.service
         11.867s keyboard-setup.service
         11.783s systemd-modules-load.service
         11.098s systemd-tmpfiles-setup-dev.service
          6.452s NetworkManager-wait-online.service
          4.169s udisks2.service
          3.744s NetworkManager.service
          3.687s tlp.service
          3.306s networkd-dispatcher.service
          3.299s snapd.service
          2.063s thermald.service
          2.024s apport.service
          2.008s ModemManager.service
          2.003s accounts-daemon.service
          1.973s gpu-manager.service
          1.631s apparmor.service
          1.478s grub-common.service
          1.386s plymouth-read-write.service
          1.217s systemd-journald.service
          1.135s upower.service
           911ms avahi-daemon.servi

et cela me semble un peu plus rapide que d'habitude, même si la comparaison avec le précédent semble indiquer le contraire. Je pense que sans ssd, il sera difficile de faire mieux.

Par contre je ne comprend pas pourquoi le plantage semble avoir disparu alors que je n'ai rien fait. Puisque après le changement d'ordre de boot, c'était toujours aléatoire.

Dernière modification par Gog (Le 11/01/2020, à 19:06)

Gog · Le 11/01/2020, à 19:20

Je fais exprès de faire un doublon.

De nouveau, 2 plantages consécutifs. shift et ctrl+alt+f1 inopérant.

précisions sur le type d'écran noir

page packard-bell instantanée à l'allumage
GRUB assez rapide également
sélection ubuntu
écran noir mais rétroéclairage en fonction
Lorsqu'il plante, il plante sur un écran noir non rétro éclairé

Pour se démarrage

-ENLE11BZ:~$ systemd-analyze blame
         15.847s dev-sda7.device
         13.171s ufw.service
         12.692s systemd-journal-flush.service
         11.959s systemd-tmpfiles-setup-dev.service
          6.419s NetworkManager-wait-online.service
          4.492s NetworkManager.service
          3.939s networkd-dispatcher.service
          3.688s udisks2.service
          3.369s snapd.service
          2.005s thermald.service
          1.839s keyboard-setup.service
          1.802s grub-common.service
          1.680s accounts-daemon.service
          1.642s ModemManager.service
          1.559s gpu-manager.service
          1.369s apparmor.service
          1.094s systemd-modules-load.service
          1.092s plymouth-read-write.service
           979ms systemd-journald.service
           873ms upower.service
           787ms systemd-fsck@dev-disk-by\x2duuid-1649\x2d8F38.service
           762ms systemd-sysctl.service
           760ms user@1000.service
lines 1-23

Gog · Le 13/01/2020, à 16:19

Bonjour,

Un petit up.
J'ai essayé de continuer à chercher pourquoi j'ai ces soucis de démarrage. Mais mes maigres connaissances font que j'en suis toujours au même point.
Vu que lorsque cela plante, l'écran noir est non rétro-éclairé, c'est peut être au niveau du chargement du driver vidéo.

Si quelqu'un a une idée, je suis disponible après 16h30 pour faire des essais.

Sinon je ferai une réinstallation, sur le disque d'origine voir sur un SSD.

CDLT

zephirin · Le 13/01/2020, à 17:15

J'ai lu tout le post et effectivement /

- le processeur est faiblard
- tu as un écran de 17 pouces donc la puce graphique est plus fortement mise à contribution qu'un écran plus petit
- le disque dur n'est pas des plus rapide
- mémoire quand même bien question qualité (DDR3) et quantité.

As-tu essayé quand tu es dans ton grub de démarrer en mode recovery et une fois la session ouverte faire :

sudo apt-get update
sudo apt-get upgrade
autoremove

Ou bien si tu préfères faire ta mise à jour avec l'utilitaire, va voir s'il n'y aurait pas un pilote propriétaire (dernier onglet) "pilotes additionnels" à récupérer et teste le.
https://doc.ubuntu-fr.org/_media/ati_dr … tok=9b16e5

Après si tout fonctionne bien effectivement tu peux acheter un ssd pour 20 Euros (120GB).

Une autre piste si le souci provient comme je le suppose de ta partie graphique https://forum.ubuntu-fr.org/viewtopic.php?id=1995618

Dernière modification par zephirin (Le 13/01/2020, à 17:26)

Gog · Le 13/01/2020, à 18:50

Merci pour ton intervention.

J'ai essayé le.mode recovery......pour la 1ere fois, j'ai un nouveau bug. Lorsque je suis sur le.menu de ce mode, j'ai des morceaux de mots (écrits en blanc sur fond noir) éparpillés sur l'écran bleu comme une mosaïque.

Le

sudo apt-get update

et les suivants ne donne rien. Et lors du reboot, l'ordinateur planté sur l'écran noir, comme d'hab.

Je vais tester la recherche de driver.
Mais c'est quand même fou ce plantage aléatoire. Si c'était tout le temps ok. Mais là, c'est quand il veut ou il veut oas

Dernière modification par Gog (Le 13/01/2020, à 18:52)

zephirin · Le 13/01/2020, à 18:54

Problème graphique à mon avis, tu as regardé le dernier lien de mon post précédent ?

Gog · Le 13/01/2020, à 18:58

Après avoir attendu qu'il veuille bien démarrer (2 essais), je suis sur le gestionnaire de mise à jour, aucun pilotes disponible.
Et là je vais jeter un œil sur le lien

zephirin · Le 13/01/2020, à 19:02

Ok donc pas de pilote additionnel dispo.

Gog · Le 13/01/2020, à 19:10

Voilà les 2 retours de commande

-ENLE11BZ:~$ xrandr
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192
LVDS connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 383mm x 215mm
   1600x900      60.08*+
   1440x900      59.99  
   1280x854      59.95  
   1280x800      59.96  
   1280x720      59.97  
   1152x768      59.95  
   1024x768      59.95  
   800x600       59.96  
   848x480       59.94  
   720x480       59.94  
   640x480       59.94  
HDMI-0 disconnected (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)

[    36.378] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    36.379] X Protocol Version 11, Revision 0
[    36.379] Build Operating System: Linux 4.4.0-148-generic x86_64 Ubuntu
[    36.379] Current Operating System: Linux ms-ENLE11BZ 4.15.0-74-generic #84-Ubuntu SMP Thu Dec 19 08:06:28 UTC 2019 x86_64
[    36.379] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-74-generic root=UUID=b204c638-a907-4bd1-be15-e01e41bc733d ro quiet splash vt.handoff=1
[    36.379] Build Date: 03 June 2019  08:10:35AM
[    36.379] xorg-server 2:1.19.6-1ubuntu4.3 (For technical support please see http://www.ubuntu.com/support) 
[    36.379] Current version of pixman: 0.34.0
[    36.379] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    36.379] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    36.379] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 13 17:54:06 2020
[    36.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    36.401] (==) No Layout section.  Using the first Screen section.
[    36.401] (==) No screen section available. Using defaults.
[    36.401] (**) |-->Screen "Default Screen Section" (0)
[    36.401] (**) |   |-->Monitor "<default monitor>"
[    36.402] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    36.402] (==) Automatically adding devices
[    36.402] (==) Automatically enabling devices
[    36.402] (==) Automatically adding GPU devices
[    36.402] (==) Automatically binding GPU devices
[    36.402] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    36.402] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    36.402] 	Entry deleted from font path.
[    36.403] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    36.403] 	Entry deleted from font path.
[    36.403] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    36.403] 	Entry deleted from font path.
[    36.403] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    36.403] 	Entry deleted from font path.
[    36.403] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    36.403] 	Entry deleted from font path.
[    36.403] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    36.403] (==) ModulePath set to "/usr/lib/xorg/modules"
[    36.403] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    36.403] (II) Loader magic: 0x557c15d18020
[    36.403] (II) Module ABI versions:
[    36.403] 	X.Org ANSI C Emulation: 0.4
[    36.403] 	X.Org Video Driver: 23.0
[    36.403] 	X.Org XInput driver : 24.1
[    36.403] 	X.Org Server Extension : 10.0
[    36.406] (++) using VT number 7

[    36.406] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    36.408] (II) xfree86: Adding drm device (/dev/dri/card0)
[    36.419] (--) PCI:*(0:0:1:0) 1002:9809:1025:073d rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    36.420] (II) LoadModule: "glx"
[    36.420] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    36.513] (II) Module glx: vendor="X.Org Foundation"
[    36.513] 	compiled for 1.19.6, module version = 1.0.0
[    36.513] 	ABI class: X.Org Server Extension, version 10.0
[    36.513] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[    36.513] 	loading driver: radeon
[    36.514] (==) Matched radeon as autoconfigured driver 0
[    36.514] (==) Matched ati as autoconfigured driver 1
[    36.514] (==) Matched ati as autoconfigured driver 2
[    36.514] (==) Matched modesetting as autoconfigured driver 3
[    36.514] (==) Matched fbdev as autoconfigured driver 4
[    36.514] (==) Matched vesa as autoconfigured driver 5
[    36.514] (==) Assigned the driver to the xf86ConfigLayout
[    36.514] (II) LoadModule: "radeon"
[    36.514] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    36.525] (II) Module radeon: vendor="X.Org Foundation"
[    36.525] 	compiled for 1.19.6, module version = 18.0.1
[    36.525] 	Module class: X.Org Video Driver
[    36.525] 	ABI class: X.Org Video Driver, version 23.0
[    36.525] (II) LoadModule: "ati"
[    36.526] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    36.526] (II) Module ati: vendor="X.Org Foundation"
[    36.526] 	compiled for 1.19.6, module version = 18.0.1
[    36.526] 	Module class: X.Org Video Driver
[    36.526] 	ABI class: X.Org Video Driver, version 23.0
[    36.620] (II) LoadModule: "modesetting"
[    36.621] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    36.621] (II) Module modesetting: vendor="X.Org Foundation"
[    36.621] 	compiled for 1.19.6, module version = 1.19.6
[    36.621] 	Module class: X.Org Video Driver
[    36.621] 	ABI class: X.Org Video Driver, version 23.0
[    36.621] (II) LoadModule: "fbdev"
[    36.621] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    36.622] (II) Module fbdev: vendor="X.Org Foundation"
[    36.622] 	compiled for 1.19.3, module version = 0.4.4
[    36.622] 	Module class: X.Org Video Driver
[    36.622] 	ABI class: X.Org Video Driver, version 23.0
[    36.622] (II) LoadModule: "vesa"
[    36.622] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    36.622] (II) Module vesa: vendor="X.Org Foundation"
[    36.622] 	compiled for 1.19.3, module version = 2.3.4
[    36.622] 	Module class: X.Org Video Driver
[    36.622] 	ABI class: X.Org Video Driver, version 23.0
[    36.622] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
	ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
	ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
	ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
	ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
	ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
	ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
	ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
	ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
	ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
	ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
	ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
	ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
	ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
	ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
	ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
	ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
	ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
	ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
	ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
	ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
	ATI Radeon 9800PRO, ATI Radeon 9800XT,
	ATI Radeon Mobility 9600/9700 (M10/M11),
	ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
	ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
	ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
	ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
	ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
	ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
	ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
	ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
	ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
	ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
	ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
	ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
	ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
	ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
	ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
	ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
	ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
	ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
	ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
	ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
	ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
	ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
	ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
	ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
	ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
	ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
	ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
	ATI FireGL V3350, ATI Mobility Radeon X1450,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
	ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
	ATI FireGL V3400, ATI Mobility FireGL V5250,
	ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
	ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
	ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
	ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
	ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
	ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
	ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
	AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
	ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
	ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
	ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
	ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
	ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
	ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
	REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
	ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
	AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
	ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
	MULLINS, KAVERI, HAWAII
[    36.631] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    36.631] (II) FBDEV: driver for framebuffer: fbdev
[    36.631] (II) VESA: driver for VESA chipsets: vesa
[    36.655] (II) [KMS] Kernel modesetting enabled.
[    36.655] (WW) Falling back to old probe method for modesetting
[    36.658] (WW) Falling back to old probe method for fbdev
[    36.658] (II) Loading sub module "fbdevhw"
[    36.658] (II) LoadModule: "fbdevhw"
[    36.659] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    36.659] (II) Module fbdevhw: vendor="X.Org Foundation"
[    36.659] 	compiled for 1.19.6, module version = 0.0.2
[    36.659] 	ABI class: X.Org Video Driver, version 23.0
[    36.659] (WW) Falling back to old probe method for vesa
[    36.659] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    36.659] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    36.659] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    36.659] (==) RADEON(0): Default visual is TrueColor
[    36.659] (==) RADEON(0): RGB weight 888
[    36.660] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    36.660] (--) RADEON(0): Chipset: "PALM" (ChipID = 0x9809)
[    36.663] (II) Loading sub module "fb"
[    36.663] (II) LoadModule: "fb"
[    36.663] (II) Loading /usr/lib/xorg/modules/libfb.so
[    36.663] (II) Module fb: vendor="X.Org Foundation"
[    36.664] 	compiled for 1.19.6, module version = 1.0.0
[    36.664] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    36.664] (II) Loading sub module "dri2"
[    36.664] (II) LoadModule: "dri2"
[    36.664] (II) Module "dri2" already built-in
[    36.664] (II) Loading sub module "glamoregl"
[    36.664] (II) LoadModule: "glamoregl"
[    36.664] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    36.776] (II) Module glamoregl: vendor="X.Org Foundation"
[    36.776] 	compiled for 1.19.6, module version = 1.0.0
[    36.776] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    36.776] (II) glamor: OpenGL accelerated X.org driver based.
[    37.498] (II) glamor: EGL version 1.5:
[    37.538] (II) RADEON(0): glamor detected, initialising EGL layer.
[    37.538] (II) RADEON(0): KMS Color Tiling: enabled
[    37.538] (II) RADEON(0): KMS Color Tiling 2D: enabled
[    37.538] (==) RADEON(0): TearFree property default: auto
[    37.538] (II) RADEON(0): KMS Pageflipping: enabled
[    37.563] (II) RADEON(0): Output LVDS has no monitor section
[    37.565] (II) RADEON(0): Output HDMI-0 has no monitor section
[    37.580] (II) RADEON(0): Output VGA-0 has no monitor section
[    37.605] (II) RADEON(0): EDID for output LVDS
[    37.606] (II) RADEON(0): Manufacturer: LGD  Model: 340  Serial#: 0
[    37.606] (II) RADEON(0): Year: 2011  Week: 0
[    37.606] (II) RADEON(0): EDID Version: 1.3
[    37.606] (II) RADEON(0): Digital Display Input
[    37.606] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 22
[    37.606] (II) RADEON(0): Gamma: 2.20
[    37.606] (II) RADEON(0): No DPMS capabilities specified
[    37.606] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    37.606] (II) RADEON(0): First detailed timing is preferred mode
[    37.606] (II) RADEON(0): redX: 0.610 redY: 0.350   greenX: 0.335 greenY: 0.598
[    37.606] (II) RADEON(0): blueX: 0.152 blueY: 0.095   whiteX: 0.313 whiteY: 0.329
[    37.606] (II) RADEON(0): Manufacturer's mask: 0
[    37.606] (II) RADEON(0): Supported detailed timing:
[    37.606] (II) RADEON(0): clock: 97.8 MHz   Image Size:  383 x 215 mm
[    37.606] (II) RADEON(0): h_active: 1600  h_sync: 1648  h_sync_end 1696 h_blank_end 1784 h_border: 0
[    37.606] (II) RADEON(0): v_active: 900  v_sync: 902  v_sync_end 905 v_blanking: 912 v_border: 0
[    37.606] (II) RADEON(0):  LG Display
[    37.606] (II) RADEON(0):  LP173WD1-TLA4
[    37.606] (II) RADEON(0): EDID (in hex):
[    37.606] (II) RADEON(0): 	00ffffffffffff0030e4400300000000
[    37.606] (II) RADEON(0): 	00150103802616780a6c159c59559927
[    37.606] (II) RADEON(0): 	18505400000001010101010101010101
[    37.606] (II) RADEON(0): 	0101010101012f2640b860840c303030
[    37.606] (II) RADEON(0): 	23007fd7100000190000000000000000
[    37.606] (II) RADEON(0): 	00000000000000000000000000fe004c
[    37.607] (II) RADEON(0): 	4720446973706c61790a2020000000fe
[    37.607] (II) RADEON(0): 	004c503137335744312d544c4134007e
[    37.607] (II) RADEON(0): Printing probed modes for output LVDS
[    37.607] (II) RADEON(0): Modeline "1600x900"x60.1   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    37.607] (II) RADEON(0): Modeline "1440x900"x60.0  106.68  1440 1528 1672 1904  900 903 909 934 -hsync +vsync (56.0 kHz)
[    37.607] (II) RADEON(0): Modeline "1280x854"x60.0   89.34  1280 1352 1480 1680  854 857 867 887 -hsync +vsync (53.2 kHz)
[    37.607] (II) RADEON(0): Modeline "1280x800"x60.0   83.71  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.8 kHz)
[    37.607] (II) RADEON(0): Modeline "1280x720"x60.0   74.65  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.9 kHz)
[    37.607] (II) RADEON(0): Modeline "1152x768"x59.9   71.95  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.8 kHz)
[    37.607] (II) RADEON(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    37.607] (II) RADEON(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    37.607] (II) RADEON(0): Modeline "848x480"x59.9   31.65  848 872 952 1056  480 483 493 500 -hsync +vsync (30.0 kHz)
[    37.607] (II) RADEON(0): Modeline "720x480"x59.9   26.85  720 744 808 896  480 483 493 500 -hsync +vsync (30.0 kHz)
[    37.607] (II) RADEON(0): Modeline "640x480"x59.9   23.98  640 664 720 800  480 483 487 500 -hsync +vsync (30.0 kHz)
[    37.608] (II) RADEON(0): EDID for output HDMI-0
[    37.624] (II) RADEON(0): EDID for output VGA-0
[    37.624] (II) RADEON(0): Output LVDS connected
[    37.624] (II) RADEON(0): Output HDMI-0 disconnected
[    37.625] (II) RADEON(0): Output VGA-0 disconnected
[    37.625] (II) RADEON(0): Using exact sizes for initial modes
[    37.625] (II) RADEON(0): Output LVDS using initial mode 1600x900 +0+0
[    37.625] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:18000000 visible:f715000
[    37.625] (==) RADEON(0): DPI set to (96, 96)
[    37.625] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[    37.625] (II) Loading sub module "ramdac"
[    37.625] (II) LoadModule: "ramdac"
[    37.625] (II) Module "ramdac" already built-in
[    37.625] (II) UnloadModule: "modesetting"
[    37.625] (II) Unloading modesetting
[    37.625] (II) UnloadModule: "fbdev"
[    37.626] (II) Unloading fbdev
[    37.626] (II) UnloadSubModule: "fbdevhw"
[    37.626] (II) Unloading fbdevhw
[    37.626] (II) UnloadModule: "vesa"
[    37.626] (II) Unloading vesa
[    37.626] (--) Depth 24 pixmap format is 32 bpp
[    37.646] (II) RADEON(0): [DRI2] Setup complete
[    37.646] (II) RADEON(0): [DRI2]   DRI driver: r600
[    37.646] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    37.647] (II) RADEON(0): Front buffer size: 6000K
[    37.647] (II) RADEON(0): VRAM usage limit set to 222282K
[    37.647] (II) RADEON(0): SYNC extension fences enabled
[    37.647] (II) RADEON(0): Present extension enabled
[    37.648] (==) RADEON(0): DRI3 enabled
[    37.648] (==) RADEON(0): Backing store enabled
[    37.648] (II) RADEON(0): Direct rendering enabled
[    37.691] (II) RADEON(0): Use GLAMOR acceleration.
[    37.691] (II) RADEON(0): Acceleration enabled
[    37.692] (==) RADEON(0): DPMS enabled
[    37.692] (==) RADEON(0): Silken mouse enabled
[    37.692] (II) RADEON(0): Set up textured video (glamor)
[    37.692] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[    37.692] (II) RADEON(0): [XvMC] Extension initialized.
[    37.692] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    37.693] (--) RandR disabled
[    37.732] (II) SELinux: Disabled on system
[    37.743] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    37.743] (II) AIGLX: enabled GLX_ARB_create_context
[    37.743] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    37.743] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    37.743] (II) AIGLX: enabled GLX_INTEL_swap_event
[    37.743] (II) AIGLX: enabled GLX_SGI_swap_control
[    37.743] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    37.743] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    37.744] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    37.744] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    37.744] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    37.748] (II) AIGLX: Loaded and initialized r600
[    37.748] (II) GLX: Initialized DRI2 GL provider for screen 0
[    37.761] (II) RADEON(0): Setting screen physical size to 423 x 238
[    37.993] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    37.993] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    37.993] (II) LoadModule: "libinput"
[    37.994] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    38.049] (II) Module libinput: vendor="X.Org Foundation"
[    38.049] 	compiled for 1.19.6, module version = 0.27.1
[    38.049] 	Module class: X.Org XInput Driver
[    38.049] 	ABI class: X.Org XInput driver, version 24.1
[    38.049] (II) Using input driver 'libinput' for 'Power Button'
[    38.049] (**) Power Button: always reports core events
[    38.049] (**) Option "Device" "/dev/input/event4"
[    38.049] (**) Option "_source" "server/udev"
[    38.051] (II) event4  - Power Button: is tagged by udev as: Keyboard
[    38.051] (II) event4  - Power Button: device is a keyboard
[    38.051] (II) event4  - Power Button: device removed
[    38.064] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    38.065] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    38.065] (**) Option "xkb_model" "pc105"
[    38.065] (**) Option "xkb_layout" "fr"
[    38.065] (**) Option "xkb_variant" "latin9"
[    38.137] (II) event4  - Power Button: is tagged by udev as: Keyboard
[    38.137] (II) event4  - Power Button: device is a keyboard
[    38.139] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    38.139] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    38.139] (II) Using input driver 'libinput' for 'Video Bus'
[    38.139] (**) Video Bus: always reports core events
[    38.139] (**) Option "Device" "/dev/input/event8"
[    38.139] (**) Option "_source" "server/udev"
[    38.141] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[    38.141] (II) event8  - Video Bus: device is a keyboard
[    38.141] (II) event8  - Video Bus: device removed
[    38.152] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15/event8"
[    38.152] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    38.152] (**) Option "xkb_model" "pc105"
[    38.153] (**) Option "xkb_layout" "fr"
[    38.153] (**) Option "xkb_variant" "latin9"
[    38.156] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[    38.156] (II) event8  - Video Bus: device is a keyboard
[    38.158] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    38.158] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    38.158] (II) Using input driver 'libinput' for 'Power Button'
[    38.158] (**) Power Button: always reports core events
[    38.159] (**) Option "Device" "/dev/input/event1"
[    38.159] (**) Option "_source" "server/udev"
[    38.160] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    38.160] (II) event1  - Power Button: device is a keyboard
[    38.161] (II) event1  - Power Button: device removed
[    38.176] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:01/input/input1/event1"
[    38.176] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    38.176] (**) Option "xkb_model" "pc105"
[    38.176] (**) Option "xkb_layout" "fr"
[    38.177] (**) Option "xkb_variant" "latin9"
[    38.180] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    38.180] (II) event1  - Power Button: device is a keyboard
[    38.181] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    38.182] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    38.182] (II) Using input driver 'libinput' for 'Sleep Button'
[    38.182] (**) Sleep Button: always reports core events
[    38.182] (**) Option "Device" "/dev/input/event2"
[    38.182] (**) Option "_source" "server/udev"
[    38.183] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    38.183] (II) event2  - Sleep Button: device is a keyboard
[    38.183] (II) event2  - Sleep Button: device removed
[    38.200] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input2/event2"
[    38.200] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    38.200] (**) Option "xkb_model" "pc105"
[    38.200] (**) Option "xkb_layout" "fr"
[    38.201] (**) Option "xkb_variant" "latin9"
[    38.204] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    38.204] (II) event2  - Sleep Button: device is a keyboard
[    38.206] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    38.206] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    38.206] (II) Using input driver 'libinput' for 'Power Button'
[    38.206] (**) Power Button: always reports core events
[    38.206] (**) Option "Device" "/dev/input/event0"
[    38.206] (**) Option "_source" "server/udev"
[    38.208] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    38.208] (II) event0  - Power Button: device is a keyboard
[    38.208] (II) event0  - Power Button: device removed
[    38.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    38.229] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[    38.229] (**) Option "xkb_model" "pc105"
[    38.229] (**) Option "xkb_layout" "fr"
[    38.229] (**) Option "xkb_variant" "latin9"
[    38.232] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    38.232] (II) event0  - Power Button: device is a keyboard
[    38.234] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    38.234] (II) No input driver specified, ignoring this device.
[    38.234] (II) This device may have been added with another device file.
[    38.237] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[    38.237] (II) No input driver specified, ignoring this device.
[    38.237] (II) This device may have been added with another device file.
[    38.239] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/event6)
[    38.239] (**) 2.4GHz 2way RF Receiver: Applying InputClass "libinput pointer catchall"
[    38.239] (**) 2.4GHz 2way RF Receiver: Applying InputClass "libinput keyboard catchall"
[    38.239] (II) Using input driver 'libinput' for '2.4GHz 2way RF Receiver'
[    38.240] (**) 2.4GHz 2way RF Receiver: always reports core events
[    38.240] (**) Option "Device" "/dev/input/event6"
[    38.240] (**) Option "_source" "server/udev"
[    38.241] (II) event6  - 2.4GHz 2way RF Receiver: is tagged by udev as: Keyboard Mouse
[    38.242] (II) event6  - 2.4GHz 2way RF Receiver: device is a pointer
[    38.242] (II) event6  - 2.4GHz 2way RF Receiver: device is a keyboard
[    38.242] (II) event6  - 2.4GHz 2way RF Receiver: device removed
[    38.261] (II) libinput: 2.4GHz 2way RF Receiver: needs a virtual subdevice
[    38.261] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1BCF:053A.0001/input/input12/event6"
[    38.261] (II) XINPUT: Adding extended input device "2.4GHz 2way RF Receiver" (type: MOUSE, id 11)
[    38.262] (**) Option "AccelerationScheme" "none"
[    38.262] (**) 2.4GHz 2way RF Receiver: (accel) selected scheme none/0
[    38.262] (**) 2.4GHz 2way RF Receiver: (accel) acceleration factor: 2.000
[    38.262] (**) 2.4GHz 2way RF Receiver: (accel) acceleration threshold: 4
[    38.265] (II) event6  - 2.4GHz 2way RF Receiver: is tagged by udev as: Keyboard Mouse
[    38.265] (II) event6  - 2.4GHz 2way RF Receiver: device is a pointer
[    38.265] (II) event6  - 2.4GHz 2way RF Receiver: device is a keyboard
[    38.267] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/mouse0)
[    38.267] (II) No input driver specified, ignoring this device.
[    38.267] (II) This device may have been added with another device file.
[    38.269] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event13)
[    38.269] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[    38.269] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[    38.269] (**) HD WebCam: HD WebCam: always reports core events
[    38.269] (**) Option "Device" "/dev/input/event13"
[    38.269] (**) Option "_source" "server/udev"
[    38.271] (II) event13 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[    38.271] (II) event13 - HD WebCam: HD WebCam: device is a keyboard
[    38.271] (II) event13 - HD WebCam: HD WebCam: device removed
[    38.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input20/event13"
[    38.300] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 12)
[    38.300] (**) Option "xkb_model" "pc105"
[    38.300] (**) Option "xkb_layout" "fr"
[    38.300] (**) Option "xkb_variant" "latin9"
[    38.304] (II) event13 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[    38.304] (II) event13 - HD WebCam: HD WebCam: device is a keyboard
[    38.305] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event10)
[    38.305] (II) No input driver specified, ignoring this device.
[    38.305] (II) This device may have been added with another device file.
[    38.306] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event11)
[    38.306] (II) No input driver specified, ignoring this device.
[    38.307] (II) This device may have been added with another device file.
[    38.308] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event12)
[    38.308] (II) No input driver specified, ignoring this device.
[    38.308] (II) This device may have been added with another device file.
[    38.309] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[    38.309] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    38.309] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    38.309] (**) AT Translated Set 2 keyboard: always reports core events
[    38.309] (**) Option "Device" "/dev/input/event5"
[    38.309] (**) Option "_source" "server/udev"
[    38.311] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    38.311] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[    38.311] (II) event5  - AT Translated Set 2 keyboard: device removed
[    38.328] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[    38.328] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    38.328] (**) Option "xkb_model" "pc105"
[    38.329] (**) Option "xkb_layout" "fr"
[    38.329] (**) Option "xkb_variant" "latin9"
[    38.332] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    38.332] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[    38.334] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event7)
[    38.334] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "libinput touchpad catchall"
[    38.335] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    38.335] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[    38.335] (II) LoadModule: "synaptics"
[    38.335] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    38.336] (II) Module synaptics: vendor="X.Org Foundation"
[    38.336] 	compiled for 1.19.3, module version = 1.9.0
[    38.336] 	Module class: X.Org XInput Driver
[    38.336] 	ABI class: X.Org XInput driver, version 24.1
[    38.336] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    38.336] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    38.336] (**) Option "Device" "/dev/input/event7"
[    38.372] (II) synaptics: AlpsPS/2 ALPS GlidePoint: ignoring touch events for semi-multitouch device
[    38.373] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1408 (res 0)
[    38.373] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 704 (res 0)
[    38.373] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    38.373] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    38.373] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle double triple
[    38.373] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    38.373] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    38.373] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    38.373] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    38.404] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input11/event7"
[    38.404] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 14)
[    38.405] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    38.405] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[    38.405] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.127
[    38.406] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    38.406] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    38.406] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    38.406] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    38.406] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    38.409] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    38.409] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    38.420] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event14)
[    38.420] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    38.420] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[    38.420] (**) Acer WMI hotkeys: always reports core events
[    38.420] (**) Option "Device" "/dev/input/event14"
[    38.421] (**) Option "_source" "server/udev"
[    38.422] (II) event14 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    38.422] (II) event14 - Acer WMI hotkeys: device is a keyboard
[    38.422] (II) event14 - Acer WMI hotkeys: device removed
[    38.440] (**) Option "config_info" "udev:/sys/devices/virtual/input/input21/event14"
[    38.440] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[    38.440] (**) Option "xkb_model" "pc105"
[    38.440] (**) Option "xkb_layout" "fr"
[    38.440] (**) Option "xkb_variant" "latin9"
[    38.443] (II) event14 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    38.443] (II) event14 - Acer WMI hotkeys: device is a keyboard
[    38.459] (**) 2.4GHz 2way RF Receiver: Applying InputClass "libinput pointer catchall"
[    38.459] (**) 2.4GHz 2way RF Receiver: Applying InputClass "libinput keyboard catchall"
[    38.459] (II) Using input driver 'libinput' for '2.4GHz 2way RF Receiver'
[    38.459] (**) 2.4GHz 2way RF Receiver: always reports core events
[    38.459] (**) Option "Device" "/dev/input/event6"
[    38.459] (**) Option "_source" "_driver/libinput"
[    38.459] (II) libinput: 2.4GHz 2way RF Receiver: is a virtual subdevice
[    38.459] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1BCF:053A.0001/input/input12/event6"
[    38.459] (II) XINPUT: Adding extended input device "2.4GHz 2way RF Receiver" (type: KEYBOARD, id 16)
[    38.460] (**) Option "xkb_model" "pc105"
[    38.460] (**) Option "xkb_layout" "fr"
[    38.460] (**) Option "xkb_variant" "latin9"
[    44.045] (II) RADEON(0): EDID vendor "LGD", prod id 832
[    44.045] (II) RADEON(0): Printing DDC gathered Modelines:
[    44.045] (II) RADEON(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    45.290] (II) RADEON(0): EDID vendor "LGD", prod id 832
[    45.290] (II) RADEON(0): Printing DDC gathered Modelines:
[    45.290] (II) RADEON(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    45.334] (II) RADEON(0): EDID vendor "LGD", prod id 832
[    45.334] (II) RADEON(0): Printing DDC gathered Modelines:
[    45.334] (II) RADEON(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    48.921] (II) RADEON(0): EDID vendor "LGD", prod id 832
[    48.921] (II) RADEON(0): Printing DDC gathered Modelines:
[    48.921] (II) RADEON(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[   523.920] (II) RADEON(0): EDID vendor "LGD", prod id 832
[   523.921] (II) RADEON(0): Printing DDC gathered Modelines:
[   523.921] (II) RADEON(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)

Et effectivement, je suis sur le même cas je pense, car j'ai le même processeur graphique hd7310

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 08/01/2020, à 21:27

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#27 Le 08/01/2020, à 21:41

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#28 Le 08/01/2020, à 22:22

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#29 Le 08/01/2020, à 23:38

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#30 Le 09/01/2020, à 19:11

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#31 Le 09/01/2020, à 19:14

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#32 Le 09/01/2020, à 19:18

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#33 Le 09/01/2020, à 19:39

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#34 Le 09/01/2020, à 19:47

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#35 Le 10/01/2020, à 17:54

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#36 Le 10/01/2020, à 18:55

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#37 Le 10/01/2020, à 19:03

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#38 Le 10/01/2020, à 19:17

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#39 Le 10/01/2020, à 19:20

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#40 Le 11/01/2020, à 16:08

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#41 Le 11/01/2020, à 16:14

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#42 Le 11/01/2020, à 19:03

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#43 Le 11/01/2020, à 19:20

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#44 Le 13/01/2020, à 16:19

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#45 Le 13/01/2020, à 17:15

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#46 Le 13/01/2020, à 18:50

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#47 Le 13/01/2020, à 18:54

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#48 Le 13/01/2020, à 18:58

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#49 Le 13/01/2020, à 19:02

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

#50 Le 13/01/2020, à 19:10

Re : [résolu en partie]redonner vie à un packard-bell avec AMD E1-1200

Pied de page des forums