Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 11/02/2020, à 22:18

remio7

Carte SD plus reconnue sur mon PC

Bonjour à tous,

J'ai une carte SD de 128GB (et qui affiche 119GO) avec laquelle j'ai des soucis :

- Sur mon PC (Dell E7250 sous Voyager-live 19.10 Gnome) elle n'est pas reconnue (erreur E/S sur /dev/mmcblk0 sur Gparted, impossible à formater sur Disk et ne s'affiche pas sur Nautilus).
- Sur d'autre PC, pas de soucis, que ce soit sur Windows ou Voyager-live 18.04. Je l'ai reformaté plusieurs fois sur ces PC.
- Pas de soucis pour d'autres carte SD sur mon PC...

Je ne sais pas d'où ça vient.. Je pensait au début à la tale de partition mais si ça marche ailleurs je sais pas..

Vous avez des idées..?
Déjà arrivé à quelqu'un ?

Merci beauoup,

Rémi.


PS : aussi un autre soucis sur un DD SSD de 128GO : il semble avoir 3 partitions dont 2 parralèles, impossible à formater et à untiliser, seule la première partition de quelques Mo s'affiche, je vous mettrais des images demain pour que vous voyer cette chose étrange..

Hors ligne

#2 Le 12/02/2020, à 08:48

moko138

Re : Carte SD plus reconnue sur mon PC

Lis ce message ./viewtopic.php?pid=21983080#p21983080 "[Tuto] Ma clef (ou autre support amovible) ne monte pas ou mal" et applique-le depuis le système d'exploitation et la machine où le problème se produit.

Pour le SSD, même procédure mais ouvre un fil différent.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#3 Le 15/02/2020, à 09:47

remio7

Re : Carte SD plus reconnue sur mon PC

Merci beaucoup pour la réponse (et désolépour le reatrd, j'ai eu des soucis internet).

Voici le retour :

remi@remi-Latitude-E7250:~$ dmesg | tail -1 > ~/tail.txt; sleep 45 && echo -e "\n\tLes 2 derniers systèmes de fichiers montés :"; mount -l | tail -2 ; echo -e "\n\tUSB, les puces :"; lsusb | sort; echo -e "\n\tUSB, les modules :"; lsusb -t; echo -e "\n\tDMESG :"; dmesg | grep -A999 "$(sed -r 's/([].[])/\\\1/g' ~/tail.txt)" | grep -Evi "80211|associate|authenticat|dhclient|dhcp|forcedeth|ipv6|link is not ready|network|no link during initialization|phy[0-9]|tx/rx|tx status|ufw|wlan"; echo -e "\n\tContenu de /media :"; ls -la /media; echo -e "\n\tContenu de /media/moi :";  ls -la "/media/$USER"; echo -e "\n\tGestionnaire de fichiers :"; dpkg -l | grep -i "file .*manager" | awk '!/plugin|profile/{print $1,$2,$3,$4}' ; echo -e "\n\tNombre d'éléments de /home/moi ne m'appartenant pas :"; find ~ \( ! -user $USER -o ! -group $USER \) | wc -l; echo -e "\n\tDésignation STABLE des périphériques :"; ls -l /dev/disk/by-id | grep -iEv "\-part[3-9]|total|\-part[1-9][0-9]" | sort -k 10; echo; lsb_release -d; echo -e "\nNoyau en service : $(uname -mr)\n"; echo "Logué en tant que : $(whoami)"

	Les 2 derniers systèmes de fichiers montés :
tmpfs on /run/snapd/ns type tmpfs (rw,nosuid,noexec,relatime,size=1628444k,mode=755)
nsfs on /run/snapd/ns/chromium.mnt type nsfs (rw)

	USB, les puces :
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8001 Intel Corp. 
Bus 001 Device 003: ID 8087:0a2a Intel Corp. 
Bus 001 Device 004: ID 0c45:6709 Microdia 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

	USB, les modules :
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/11p, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
        |__ Port 3: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
        |__ Port 3: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
        |__ Port 6: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
        |__ Port 6: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M

	DMESG :
[  701.859507] audit: type=1400 audit(1581755116.336:48): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/sys/devices/virtual/dmi/id/product_name" pid=3599 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1838.318219] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1838.320037] mmc0: new ultra high speed SDR104 SDXC card at address 0001
[ 1838.331675] mmcblk0: mmc0:0001 ED4QT 119 GiB 
[ 1838.386220] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1838.442216] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1838.498247] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1838.554202] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1840.586154] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1840.588123] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1840.588131] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1840.642149] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1840.698152] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1840.754145] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1840.810149] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1840.866146] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1840.922142] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1840.924085] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1840.924094] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1840.978123] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.034121] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.090136] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.146125] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.202124] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.258127] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.260065] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1841.260074] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1841.260140] ldm_validate_partition_table(): Disk read failed.
[ 1841.314132] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.370123] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.426120] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.486096] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.542128] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.598109] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.600041] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1841.600050] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1841.654106] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.710107] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.766106] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.822092] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.878101] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.934100] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1841.936036] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1841.936044] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1841.990077] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.046105] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.102103] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.158102] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.214125] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.270087] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.272024] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1842.272033] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1842.326088] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.382082] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.438083] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.494069] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.550084] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.606065] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.608000] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1842.608008] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1842.608074] Dev mmcblk0: unable to read RDB block 0
[ 1842.662072] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.718077] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.774066] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.830068] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.886056] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.942024] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1842.943982] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1842.943986] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1842.998040] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.054054] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.110055] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.166050] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.222047] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.278044] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.279982] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1843.279991] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1843.334041] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.390038] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.446031] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.502033] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.558035] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.614028] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.615961] blk_update_request: I/O error, dev mmcblk0, sector 24 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1843.615970] Buffer I/O error on dev mmcblk0, logical block 3, async page read
[ 1843.670021] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.726023] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.782021] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.838027] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.894029] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1843.950022] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.006010] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.062010] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.118007] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.174004] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.230004] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.286002] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.287984]  mmcblk0: unable to read partition table
[ 1844.349976] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.405989] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.461994] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.517994] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.573957] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.629984] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.685977] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.741999] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.797978] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.853976] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.909966] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 1844.969946] mmc0: Tuning timeout, falling back to fixed sampling clock

	Contenu de /media :
total 28
drwxr-xr-x   7 root root 4096 janv. 27 06:56 .
drwxr-xr-x  20 root root 4096 janv. 18 16:57 ..
drwxr-x---+  3 root root 4096 févr. 13 11:54 remi
drwxr-xr-x   2 root root 4096 janv. 26 14:43 woeusb_source_1580046233_16360
drwxr-xr-x   2 root root 4096 janv. 27 06:56 woeusb_source_1580104609_4802
drwxr-xr-x   2 root root 4096 janv. 26 14:44 woeusb_target_1580046233_16360
drwxr-xr-x   2 root root 4096 janv. 27 06:56 woeusb_target_1580104609_4802

	Contenu de /media/moi :
total 12
drwxr-x---+ 3 root root 4096 févr. 13 11:54 .
drwxr-xr-x  7 root root 4096 janv. 27 06:56 ..
drwx------  3 root root 4096 févr. 12 13:39 DD

	Gestionnaire de fichiers :
[sudo] Mot de passe de remi : 
dpkg: erreur: cannot access archive '*.deb': Aucun fichier ou dossier de ce type

	Nombre d'éléments de /home/moi ne m'appartenant pas :
0

	Désignation STABLE des périphériques :
lrwxrwxrwx 1 root root 13 févr. 15 09:44 mmc-ED4QT_0x9d5f677d -> ../../mmcblk0
lrwxrwxrwx 1 root root  9 févr. 15 09:13 ata-SAMSUNG_SSD_PM871_mSATA_256GB_S20ENSAG304462 -> ../../sda
lrwxrwxrwx 1 root root  9 févr. 15 09:13 wwn-0x5002538d00000000 -> ../../sda
lrwxrwxrwx 1 root root 10 févr. 15 09:13 ata-SAMSUNG_SSD_PM871_mSATA_256GB_S20ENSAG304462-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 févr. 15 09:13 wwn-0x5002538d00000000-part1 -> ../../sda1

Description:	Ubuntu 19.10

Noyau en service : 5.3.0-29-generic x86_64

Logué en tant que : remi
remi@remi-Latitude-E7250:~$ 

Je met ce fil en copie dans l'autre.

Dernière modification par remio7 (Le 15/02/2020, à 11:43)

Hors ligne

#4 Le 15/02/2020, à 13:16

moko138

Re : Carte SD plus reconnue sur mon PC

1) D'abord un peu de nettoyage ; montre :

sudo rmdir -v /media/remi/DD

  Et, si tu as fini de faire ta clef d'installation de windows, montre :

sudo mv -v /media/woeusb*  /tmp

= =

2) Je suis étonné par :

	Gestionnaire de fichiers :
[sudo] Mot de passe de remi : 
dpkg: erreur: cannot access archive '*.deb': Aucun fichier ou dossier de ce type

Pourquoi la demande de mot de passe,
et pourquoi "dpkg: erreur: cannot access archive" :
as-tu modifié la commande du tutoriel ou bien l'as-tu copiée-collée ?


3) Merci de montrer :

snap list --all

            .

  Ton lecteur de cartes n'est pas en usb mais en pci.
Il est vu comme
/dev/disk/by-id/mmc-ED4QT_0x9d5f677d

            .

= =


Mais le fond et la solution se trouvent là :

mmc0: Tuning timeout, falling back to fixed sampling clock

https://forums.linuxmint.com/viewtopic.php?t=258598
https://gist.github.com/samgooi4189/2e6 … e5e386d7cb

4) Donc, en vue de les appliquer, montre enfin :

lspci -vnnk | grep -iA12 card

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#5 Le 15/02/2020, à 15:20

remio7

Re : Carte SD plus reconnue sur mon PC

Alors dans l'ordre :

remi@remi-Latitude-E7250:~$ sudo rmdir -v /media/remi/DD
[sudo] Mot de passe de remi : 
rmdir: suppression du répertoire, '/media/remi/DD'
rmdir: impossible de supprimer '/media/remi/DD': Le dossier n'est pas vide

Je ne comprends pas pourquoi c'est encore là, je crois que c'est le nom d'un de mes DD externes... Edit : j'ai supprimé autrement, (rm -r  , rien d'utile dedans, mais je ne sais plus comment et pourquoi j'ai mis ça là...)

remi@remi-Latitude-E7250:~$ sudo mv -v /media/woeusb*  /tmp
renommé '/media/woeusb_source_1580046233_16360' -> '/tmp/woeusb_source_1580046233_16360'
renommé '/media/woeusb_source_1580104609_4802' -> '/tmp/woeusb_source_1580104609_4802'
renommé '/media/woeusb_target_1580046233_16360' -> '/tmp/woeusb_target_1580046233_16360'
renommé '/media/woeusb_target_1580104609_4802' -> '/tmp/woeusb_target_1580104609_4802'
remi@remi-Latitude-E7250:~$ 

Merci pour ça je ne savais pas ce que c'était (et je m'en était pas occupé), je ne sais pas pourquoi c'était resté là...

3) J'ai bien fait un copié collé avec un triple clic sur la commande...

et enfin :

remi@remi-Latitude-E7250:~$ lspci -vnnk | grep -iA12 card
01:00.0 SD Host controller [0805]: O2 Micro, Inc. SD/MMC Card Reader Controller [1217:8520] (rev 01) (prog-if 01)
	Subsystem: Dell SD/MMC Card Reader Controller [1028:062d]
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at f7101000 (32-bit, non-prefetchable) [size=4K]
	Memory at f7100000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci

02:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095a] (rev 59)
	Subsystem: Intel Corporation Dual Band Wireless-AC 7265 [8086:5410]
	Flags: bus master, fast devsel, latency 0, IRQ 50
	Memory at f7000000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
remi@remi-Latitude-E7250:~$ ^C

Je regarde les liens pour voir de quoi il s'agit. Ce qui m'étonne c'est que d'autre SD sont bien lues..

Edit : Merci !

Dernière modification par remio7 (Le 15/02/2020, à 15:31)

Hors ligne

#6 Le 16/02/2020, à 03:45

moko138

Re : Carte SD plus reconnue sur mon PC

Je recopie les infos sur ton lecteur pci de cartes :

lspci -vnnk | grep -iA12 card
01:00.0 SD Host controller [0805]: O2 Micro, Inc. SD/MMC Card Reader Controller [1217:8520] (rev 01) (prog-if 01)
	Subsystem: Dell SD/MMC Card Reader Controller [1028:062d]
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at f7101000 (32-bit, non-prefetchable) [size=4K]
	Memory at f7100000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci

pour exploitation ultérieure (et pour mémoire).

  - -
Et

snap list --all

?

  - -

3) J'ai bien fait un copié collé avec un triple clic sur la commande...

Ben mince alors ! Essayons autrement et montre juste ceci :

echo -e "\n\tGestionnaire(s) de fichiers :"; dpkg -l | grep -i "file .*manager"

ainsi que :

cd; echo -e "\n\tGestionnaire(s) de fichiers :"; dpkg -i | grep -i "file .*manager" | awk '!/plugin|profile/{print $1,$2,$3,$4}'

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#7 Le 16/02/2020, à 08:37

remio7

Re : Carte SD plus reconnue sur mon PC

Merci encore (ouha à 4:45 !)

les retours dans l'ordre :

remi@remi-Latitude-E7250:~$ snap list --all
Nom                Version                     Révision  Suivi     Éditeur     Notes
chromium           80.0.3987.87                1016      stable    canonical✓  désactivé
chromium           80.0.3987.100               1026      stable    canonical✓  -
core               16-2.42.5                   8268      stable    canonical✓  core,désactivé
core               16-2.43.2                   8592      stable    canonical✓  core
core18             20200113                    1650      stable    canonical✓  base,désactivé
core18             20200124                    1668      stable    canonical✓  base
gnome-3-28-1804    3.28.0-16-g27c9498.27c9498  110       stable/…  canonical✓  désactivé
gnome-3-28-1804    3.28.0-16-g27c9498.27c9498  116       stable/…  canonical✓  -
gnome-calculator   3.34.0+git1.822e4b58        501       stable/…  canonical✓  désactivé
gnome-calculator   3.34.1+git1.d34dc842        544       stable/…  canonical✓  -
gnome-characters   v3.32.1+git3.b9120df        375       stable/…  canonical✓  désactivé
gnome-characters   v3.32.1+git3.b9120df        399       stable/…  canonical✓  -
gnome-logs         3.34.0                      81        stable/…  canonical✓  -
gtk-common-themes  0.1-25-gcc83164             1353      stable/…  canonical✓  désactivé
gtk-common-themes  0.1-28-g1503258             1440      stable/…  canonical✓  -
remi@remi-Latitude-E7250:~$ 
remi@remi-Latitude-E7250:~$ echo -e "\n\tGestionnaire(s) de fichiers :"; dpkg -l | grep -i "file .*manager"

	Gestionnaire(s) de fichiers :
[sudo] Mot de passe de remi : 
dpkg: erreur: cannot access archive '*.deb': Aucun fichier ou dossier de ce type
remi@remi-Latitude-E7250:~$ ^C

ça à l'air toujours pareil...

emi@remi-Latitude-E7250:~$ cd; echo -e "\n\tGestionnaire(s) de fichiers :"; dpkg -i | grep -i "file .*manager" | awk '!/plugin|profile/{print $1,$2,$3,$4}'

	Gestionnaire(s) de fichiers :
dpkg: erreur: cannot access archive '*.deb': Aucun fichier ou dossier de ce type
remi@remi-Latitude-E7250:~$ 

Idem...

Hors ligne

#8 Le 16/02/2020, à 09:44

moko138

Re : Carte SD plus reconnue sur mon PC

Les erreurs sont différentes !

Montre

cat ~/.bashrc | grep alias

et

ls -l /usr/bin | grep -E "apt|dpkg"

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#9 Le 16/02/2020, à 10:35

remio7

Re : Carte SD plus reconnue sur mon PC

Je n'y avait pas fait attention smile

remi@remi-Latitude-E7250:~$ cat ~/.bashrc | grep alias
# enable color support of ls and also add handy aliases
    alias ls='ls --color=auto'
    #alias dir='dir --color=auto'
    #alias vdir='vdir --color=auto'
    alias grep='grep --color=auto'
    alias fgrep='fgrep --color=auto'
    alias egrep='egrep --color=auto'
# some more ls aliases
alias ll='ls -alF'
alias la='ls -A'
alias l='ls -CF'
# Add an "alert" alias for long running commands.  Use like so:
alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"'
# ~/.bash_aliases, instead of adding them here directly.
if [ -f ~/.bash_aliases ]; then
    . ~/.bash_aliases
remi@remi-Latitude-E7250:~$ 
remi@remi-Latitude-E7250:~$ ls -l /usr/bin | grep -E "apt|dpkg"
-rwxr-xr-x 1 root root        7258 juil. 12  2019 add-apt-repository
-rwxr-xr-x 1 root root       18824 sept. 19 11:13 apt
lrwxrwxrwx 1 root root          18 janv. 18 16:53 apt-add-repository -> add-apt-repository
-rwxr-xr-x 1 root root       88536 sept. 19 11:13 apt-cache
-rwxr-xr-x 1 root root       35288 sept. 19 11:13 apt-cdrom
-rwxr-xr-x 1 root root       27016 sept. 19 11:13 apt-config
-rwxr-xr-x 1 root root        1040 janv. 15 20:34 aptdcon
-rwxr-xr-x 1 root root       27104 sept. 19 11:13 apt-extracttemplates
-rwxr-xr-x 1 root root      281056 sept. 19 11:13 apt-ftparchive
-rwxr-xr-x 1 root root       47576 sept. 19 11:13 apt-get
lrwxrwxrwx 1 root root          26 janv. 25 16:29 aptitude -> /etc/alternatives/aptitude
-rwxr-xr-x 1 root root        1939 juin  18  2019 aptitude-create-state-bundle
-rwxr-xr-x 1 root root     4519376 juin  18  2019 aptitude-curses
-rwxr-xr-x 1 root root        2850 juin  18  2019 aptitude-run-state-bundle
-rwxr-xr-x 1 root root       27931 sept. 19 11:13 apt-key
-rwxr-xr-x 1 root root       63960 sept. 19 11:13 apt-mark
-rwxr-xr-x 1 root root       47504 sept. 19 11:13 apt-sortpkgs
-rwxr-xr-x 1 root root         273 mai   19  2016 apturl
lrwxrwxrwx 1 root root           3 janv. 18 16:53 captoinfo -> tic
-rwxr-xr-x 1 root root       11541 août   3  2019 debconf-apt-progress
-rwxr-xr-x 1 root root      314040 sept.  5 23:05 dpkg
-rwxr-xr-x 1 root root       12852 sept.  5 23:05 dpkg-architecture
-rwxr-xr-x 1 root root        7565 sept.  5 23:05 dpkg-buildflags
-rwxr-xr-x 1 root root       30610 sept.  5 23:05 dpkg-buildpackage
-rwxr-xr-x 1 root root        7624 sept.  5 23:05 dpkg-checkbuilddeps
-rwxr-xr-x 1 root root      178728 sept.  5 23:05 dpkg-deb
-rwxr-xr-x 1 root root        2782 sept.  5 23:05 dpkg-distaddfile
-rwxr-xr-x 1 root root      154208 sept.  5 23:05 dpkg-divert
-rwxr-xr-x 1 root root       16795 sept.  5 23:05 dpkg-genbuildinfo
-rwxr-xr-x 1 root root       17492 sept.  5 23:05 dpkg-genchanges
-rwxr-xr-x 1 root root       14199 sept.  5 23:05 dpkg-gencontrol
-rwxr-xr-x 1 root root       10902 sept.  5 23:05 dpkg-gensymbols
-rwxr-xr-x 1 root root       20514 sept.  5 23:05 dpkg-maintscript-helper
-rwxr-xr-x 1 root root        8547 sept.  5 23:05 dpkg-mergechangelogs
-rwxr-xr-x 1 root root        6789 sept.  5 23:05 dpkg-name
-rwxr-xr-x 1 root root        4567 sept.  5 23:05 dpkg-parsechangelog
-rwxr-xr-x 1 root root      166488 sept.  5 23:05 dpkg-query
-rwxr-xr-x 1 root root        8698 sept.  5 23:05 dpkg-scanpackages
-rwxr-xr-x 1 root root        9167 sept.  5 23:05 dpkg-scansources
-rwxr-xr-x 1 root root       31416 sept.  5 23:05 dpkg-shlibdeps
-rwxr-xr-x 1 root root       23022 sept.  5 23:05 dpkg-source
-rwxr-xr-x 1 root root      125424 sept.  5 23:05 dpkg-split
-rwxr-xr-x 1 root root       63760 sept.  5 23:05 dpkg-statoverride
-rwxr-xr-x 1 root root       88568 sept.  5 23:05 dpkg-trigger
-rwxr-xr-x 1 root root        3262 sept.  5 23:05 dpkg-vendor
lrwxrwxrwx 1 root root          28 janv. 18 16:53 hp-logcapture -> ../share/hplip/logcapture.py
-rwxr-xr-x 1 root root        3820 août  12  2017 laptop-detect
-rwxr-xr-x 1 root root          43 oct.  13 08:57 synaptic-pkexec
remi@remi-Latitude-E7250:~$ 

Merci beaucoup pour ton aide !

Hors ligne

#10 Le 16/02/2020, à 11:29

moko138

Re : Carte SD plus reconnue sur mon PC

J'avais envisagé un lien ou un alias malencontreux (car tout se passe comme si ton
dpkg -l   renvoyait vers   sudo dpkg -i ...), mais je ne vois rien de tel.
  Donc je ne m'explique toujours pas le retour aberrant chez toi de

dpkg -l | grep -i "file .*manager"

  - -

En attendant, tu peux toujours mettre à jour tes .snap :

sudo snap refresh

puis supprimer les .snap périmés ("désactivé"s ou "disabled"s) qui en ont bien besoin - montre le retour suivant, (d'après la commande de nany, ./viewtopic.php?pid=22083683#p22083683, du 17/4/2019) :

echo; df -Th | grep -Ev "tmpfs|squashfs"; snap list --all | awk 'BEGIN {print "#! /bin/sh\n"} ; /désactivé|disabled/ {print "snap remove "$1" --revision "$3"\n"} ; END {print "exit 0"}' > script && chmod +x script && ./script && rm script && echo && snap list --all && echo && df -Th | grep -Ev "tmpfs|squashfs"

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#11 Le 16/02/2020, à 14:09

remio7

Re : Carte SD plus reconnue sur mon PC

Merci beaucoup. Je ne maitrise pas du tout linux (en 6 ans d'utilisation, j'essaie le plus souvent de me débrouiller moi-même avec ce que je lis et quand ça marche plus je réinstalle tout...:/ , même si ça arrive moins souvent qu'avant) et je ne savais pas ce qu'était ces paquets snaps..

emi@remi-Latitude-E7250:~$ sudo snap refresh
[sudo] Mot de passe de remi : 
Tous les paquets Snaps sont à jour.
remi@remi-Latitude-E7250:~$ echo; df -Th | grep -Ev "tmpfs|squashfs"; snap list --all | awk 'BEGIN {print "#! /bin/sh\n"} ; /désactivé|disabled/ {print "snap remove "$1" --revision "$3"\n"} ; END {print "exit 0"}' > script && chmod +x script && ./script && rm script && echo && snap list --all && echo && df -Th | grep -Ev "tmpfs|squashfs"

Sys. de fichiers Type     Taille Utilisé Dispo Uti% Monté sur
/dev/sda1        ext4       234G     27G  195G  13% /
chromium (révision 1016) supprimé
core (révision 8268) supprimé
core18 (révision 1650) supprimé
gnome-3-28-1804 (révision 110) supprimé
gnome-calculator (révision 501) supprimé
gnome-characters (révision 375) supprimé
gtk-common-themes (révision 1353) supprimé

Nom                Version                     Révision  Suivi     Éditeur     Notes
chromium           80.0.3987.100               1026      stable    canonical✓  -
core               16-2.43.2                   8592      stable    canonical✓  core
core18             20200124                    1668      stable    canonical✓  base
gnome-3-28-1804    3.28.0-16-g27c9498.27c9498  116       stable/…  canonical✓  -
gnome-calculator   3.34.1+git1.d34dc842        544       stable/…  canonical✓  -
gnome-characters   v3.32.1+git3.b9120df        399       stable/…  canonical✓  -
gnome-logs         3.34.0                      81        stable/…  canonical✓  -
gtk-common-themes  0.1-28-g1503258             1440      stable/…  canonical✓  -

Sys. de fichiers Type     Taille Utilisé Dispo Uti% Monté sur
/dev/sda1        ext4       234G     27G  196G  12% /
remi@remi-Latitude-E7250:~$ sudo snap refresh
Tous les paquets Snaps sont à jour.
remi@remi-Latitude-E7250:~$ 

Hors ligne