Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 04/11/2020, à 19:31

bisane

[Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

Bonjour !

Je fais suite à ce fil : Upgrade vers 20.04 : problèmes, en espérant obtenir une réponse concrète à ce problème spécifique :
Kalarm ne fonctionne plus. Or cette appli, contrairement à plein d'autres m'est bien utile, voire indispensable !!! :Ptongue
J'ai ce message qui s'affiche, sauf que les "détails" sont assez limités, puisqu'il n'y en a pas, ni aucune manière de résoudre le problème :
Le service de gestion des informations personnelles n'est pas opérationnel.
Sinon que ça fait référence à un "Akonadi" dont je ne sais rien...

Une idée ?
Merci d'avance !

Dernière modification par bisane (Le 25/11/2020, à 19:37)

Hors ligne

#2 Le 06/11/2020, à 19:58

bisane

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

Personne ?

Hors ligne

#3 Le 07/11/2020, à 09:40

bisane

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

Je me suis donc penchée sur Akonadi... qui semble être une sorte de serveur doté d'une base de données.

Grâce à ce billet, j'ai essayé de lancer donc le serveur.
Et voilà ce que ça donne :

bisane@bisane:~$ akonadictl start
bisane@bisane:~$ connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
org.kde.pim.akonadiserver: Starting up the Akonadi Server...
org.kde.pim.akonadiserver: database server stopped unexpectedly
org.kde.pim.akonadiserver: Database process exited unexpectedly during initial connection!
org.kde.pim.akonadiserver: executable: "/usr/sbin/mysqld-akonadi"
org.kde.pim.akonadiserver: arguments: ("--defaults-file=/home/bisane/.local/share/akonadi/mysql.conf", "--datadir=/home/bisane/.local/share/akonadi/db_data/", "--socket=/run/user/1000/akonadi/mysql.socket", "--pid-file=/run/user/1000/akonadi/mysql.pid")
org.kde.pim.akonadiserver: stdout: ""
org.kde.pim.akonadiserver: stderr: "mysqld-akonadi: [ERROR] Failed to open required defaults file: /home/bisane/.local/share/akonadi/mysql.conf\nmysqld-akonadi: [ERROR] Fatal error in defaults handling. Program aborted!\n"
org.kde.pim.akonadiserver: exit code: 1
org.kde.pim.akonadiserver: process error: "Unknown error"
mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/run/user/1000/akonadi/mysql.socket' (2)'
Check that mysqld is running and that the socket: '/run/user/1000/akonadi/mysql.socket' exists!
org.kde.pim.akonadiserver: Failed to remove runtime connection config file
org.kde.pim.akonadiserver: Shutting down AkonadiServer...
org.kde.pim.akonadicontrol: Application '/usr/bin/akonadiserver' exited normally...

'/run/user/1000/akonadi/mysql.socket'
Le dossier est en effet vide...

Ce fichier-là existe bien :
/home/bisane/.local/share/akonadi/mysql.conf\

Celui-ci est vide :
/home/bisane/.local/share/akonadi/file_db_data

Je copie ce qui me semble pouvoir être utile pour la compréhension du problème, mais, à très vrai dire, personnellement, je n'y comprends strictement rien !!!
Si quelqu'un pouvait m'aider ?

Je me permets de répéter que ce qui était renseigné dans Kalarm m'est indispensable, et que, comptant sur lui, je n'ai pas ces données ailleurs, et que je suis par conséquent très très embêtée !!! sad

Dernière modification par bisane (Le 07/11/2020, à 17:43)

Hors ligne

#4 Le 07/11/2020, à 09:44

xubu1957

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

Bonjour,

Vu le § 3 de la Doc akonadi

Un retour pour :

akonadictl start

?

et :

akonadiselftest

> [Résolu] Kmail ne marche pas à cause d'Akonadi

Dernière modification par xubu1957 (Le 07/11/2020, à 09:54)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#5 Le 07/11/2020, à 11:51

bisane

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

Heu...

Un retour pour :
akonadictl start
?

bisane a écrit :

j'ai essayé de lancer donc le serveur

C'est le résultat de la commande que tu cites que j'ai mais dans mon précédent message... tongue

Voici le résultat du test :

Akonadi Server Self-Test Report
===============================

Test 1:  SUCCESS
--------

Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.

File content of '/home/bisane/.config/akonadi/akonadiserverrc':
[Debug]
Tracer=null

[%General]
Driver=QMYSQL

[QMYSQL]
Host=
Name=akonadi
Options="UNIX_SOCKET=/run/user/1000/akonadi/mysql.socket"
ServerPath=/usr/sbin/mysqld-akonadi
StartServer=true


Test 2:  SUCCESS
--------

Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.

Test 3:  SUCCESS
--------

MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/sbin/mysqld-akonadi'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.

Test 4:  SUCCESS
--------

MySQL server is executable.
Details: MySQL server found: /usr/sbin/mysqld-akonadi  Ver 8.0.22-0ubuntu0.20.04.2 for Linux on x86_64 ((Ubuntu))


Test 5:  SUCCESS
--------

No current MySQL error log found.
Details: The MySQL server did not report any errors during this startup. The log can be found in '/home/bisane/.local/share/akonadi/db_data/mysql.err'.

Test 6:  ERROR
--------

MySQL server default configuration not found.
Details: The default configuration for the MySQL server was not found or was not readable. Check your Akonadi installation is complete and you have all required access rights.

Test 7:  SKIP
--------

MySQL server custom configuration not available.
Details: The custom configuration for the MySQL server was not found but is optional.

Test 8:  SUCCESS
--------

MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href="/home/bisane/.local/share/akonadi/mysql.conf">/home/bisane/.local/share/akonadi/mysql.conf</a> and is readable.

File content of '/home/bisane/.local/share/akonadi/mysql.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]

# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables

# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");

# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)

#expire_logs_days=3

#sync_bin_log=0

# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci

# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb

# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:8M)
# Deprecated in MySQL >= 5.6.3, removed in 5.7 (works in MariaDB)
# innodb_additional_mem_pool_size=8M

# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=128M

# Create a .ibd file for each table (default:0)
innodb_file_per_table=1

# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2

# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M

# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M

# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err

# print warnings and connection errors (default:1)
log_warnings=2

# Convert table named to lowercase
lower_case_table_names=1

# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M

# Maximum simultaneous connections allowed (default:100)
max_connections=256

# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)

# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0

# Do not cache results (default:1)
query_cache_type=0

# Do not use the privileges mechanisms
skip_grant_tables

# Do not listen for TCP/IP connections at all
skip_networking

# The number of open tables for all threads. (default:64)
table_open_cache=200

# How many threads the server should cache for reuse (default:0)
thread_cache_size=3

# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000

# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K

# KUBUNTU:
# Unset the export dir check as only the full mysql-server package creates it
secure_file_priv=

# KUBUNTU:
# workaround for 5.7 being more strict with column types
# (reverts to 5.6 behavior)
sql_mode=NO_ENGINE_SUBSTITUTION

[client]
default-character-set=utf8


Test 9:  SUCCESS
--------

akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
akonadictl 5.13.3 (19.12.3)


Test 10:  ERROR
--------

Akonadi control process not registered at D-Bus.
Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.

Test 11:  ERROR
--------

Akonadi server process not registered at D-Bus.
Details: The Akonadi server process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.

Test 12:  SKIP
--------

Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.

Test 13:  ERROR
--------

No resource agents found.
Details: No resource agents have been found, Akonadi is not usable without at least one. This usually means that no resource agents are installed or that there is a setup problem. The following paths have been searched: '/usr/share/akonadi/agents'. The XDG_DATA_DIRS environment variable is set to '/usr/share/Lubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop'; make sure this includes all paths where Akonadi agents are installed.

Directory listing of '/usr/share/akonadi/agents':
akonadiindexingagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
ewsmtaresource.desktop
ewsresource.desktop
followupreminder.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kolabresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
migrationagent.desktop
mixedmaildirresource.desktop
newmailnotifieragent.desktop
notesagent.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
tomboynotesresource.desktop
unifiedmailboxagent.desktop
vcarddirresource.desktop
vcardresource.desktop

Environment variable XDG_DATA_DIRS is set to '/usr/share/Lubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop'

Test 14:  SUCCESS
--------

No current Akonadi server error log found.
Details: The Akonadi server did not report any errors during its current startup.

Test 15:  ERROR
--------

Previous Akonadi server error log found.
Details: The Akonadi server reported errors during its previous startup. The log can be found in <a href="/home/bisane/.local/share/akonadi/akonadiserver.error.old">/home/bisane/.local/share/akonadi/akonadiserver.error.old</a>.

File content of '/home/bisane/.local/share/akonadi/akonadiserver.error.old':
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)

Test 16:  SUCCESS
--------

No current Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its current startup.

Test 17:  ERROR
--------

Previous Akonadi control error log found.
Details: The Akonadi control process reported errors during its previous startup. The log can be found in <a href="/home/bisane/.local/share/akonadi/akonadi_control.error.old">/home/bisane/.local/share/akonadi/akonadi_control.error.old</a>.

File content of '/home/bisane/.local/share/akonadi/akonadi_control.error.old':
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)

Je regarde ton lien dans la soirée... j'ai d'autres impératifs, là...
Merci ! smile

Dernière modification par bisane (Le 07/11/2020, à 11:52)

Hors ligne

#6 Le 07/11/2020, à 11:55

xubu1957

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

bisane a écrit :

C'est le résultat de la commande que tu cites que j'ai mais dans mon précédent message... tongue

Tu aurais dû fournir un retour complet :

Le 29/03/2018, moko138 a écrit :

Un retour complet doit contenir toutes les lignes,
depuis celle, entière, de la commande
jusqu'à la ligne attendant la commande suivante
, exemple :

moi@mon-pc~$: ma-commande
son retour
moi@mon-pc~$:

Faute de quoi, il manque souvent à ceux qui tentent de t'aider des éléments essentiels.

(Plus de détails dans ce message-ci Retour utilisable de commande.)

Et si tu ne veux pas divulguer ton nom d'user, tu le remplaces par "toto" ou ce que tu veux.

Dernière modification par xubu1957 (Le 07/11/2020, à 11:55)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#7 Le 07/11/2020, à 17:57

bisane

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

C'est corrigé...
Mais en la circonstance, les choses me paraissaient assez claires ! tongue

J'ai tenté les manips conseillées dans ce fil, ça ne change pas grand chose...

bisane@bisane:~$ akonadictl start
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
bisane@bisane:~$ org.kde.pim.akonadiserver: Starting up the Akonadi Server...
mysqld-akonadi: [ERROR] Failed to open required defaults file: /home/bisane/
mysqld-akonadi: [ERROR] Fatal error in defaults handling. Program aborted!
org.kde.pim.akonadiserver: database server stopped unexpectedly
org.kde.pim.akonadiserver: Database process exited unexpectedly during initial connection!
org.kde.pim.akonadiserver: executable: "/usr/sbin/mysqld-akonadi"
org.kde.pim.akonadiserver: arguments: ("--defaults-file=/home/bisane/.local/share/akonadi/mysql.conf", "--datadir=/home/bisane/.local/share/akonadi/db_data/", "--socket=/run/user/1000/akonadi/mysql.socket", "--pid-file=/run/user/1000/akonadi/mysql.pid")
org.kde.pim.akonadiserver: stdout: ""
org.kde.pim.akonadiserver: stderr: "mysqld-akonadi: [ERROR] Failed to open required defaults file: /home/bisane/.local/share/akonadi/mysql.conf\nmysqld-akonadi: [ERROR] Fatal error in defaults handling. Program aborted!\n"
org.kde.pim.akonadiserver: exit code: 1
org.kde.pim.akonadiserver: process error: "Unknown error"
mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/run/user/1000/akonadi/mysql.socket' (2)'
Check that mysqld is running and that the socket: '/run/user/1000/akonadi/mysql.socket' exists!
org.kde.pim.akonadiserver: Failed to remove runtime connection config file
org.kde.pim.akonadiserver: Shutting down AkonadiServer...
org.kde.pim.akonadicontrol: Application '/usr/bin/akonadiserver' exited normally...

Retour de akonadiselftest :

Akonadi Server Self-Test Report
===============================

Test 1:  SUCCESS
--------

Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.

File content of '/home/bisane/.config/akonadi/akonadiserverrc':
[Debug]
Tracer=null

[%General]
Driver=QMYSQL

[QMYSQL]
Host=
Name=akonadi
Options="UNIX_SOCKET=/run/user/1000/akonadi/mysql.socket"
ServerPath=/usr/sbin/mysqld-akonadi
StartServer=true


Test 2:  SUCCESS
--------

Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.

Test 3:  SUCCESS
--------

MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/sbin/mysqld-akonadi'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.

Test 4:  SUCCESS
--------

MySQL server is executable.
Details: MySQL server found: /usr/sbin/mysqld-akonadi  Ver 8.0.22-0ubuntu0.20.04.2 for Linux on x86_64 ((Ubuntu))


Test 5:  SUCCESS
--------

No current MySQL error log found.
Details: The MySQL server did not report any errors during this startup. The log can be found in '/home/bisane/.local/share/akonadi/db_data/mysql.err'.

Test 6:  ERROR
--------

MySQL server default configuration not found.
Details: The default configuration for the MySQL server was not found or was not readable. Check your Akonadi installation is complete and you have all required access rights.

Test 7:  SKIP
--------

MySQL server custom configuration not available.
Details: The custom configuration for the MySQL server was not found but is optional.

Test 8:  SUCCESS
--------

MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href="/home/bisane/.local/share/akonadi/mysql.conf">/home/bisane/.local/share/akonadi/mysql.conf</a> and is readable.

File content of '/home/bisane/.local/share/akonadi/mysql.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]

# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables

# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");

# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)

#expire_logs_days=3

#sync_bin_log=0

# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci

# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb

# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:8M)
# Deprecated in MySQL >= 5.6.3, removed in 5.7 (works in MariaDB)
# innodb_additional_mem_pool_size=8M

# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=128M

# Create a .ibd file for each table (default:0)
innodb_file_per_table=1

# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2

# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M

# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M

# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err

# print warnings and connection errors (default:1)
log_warnings=2

# Convert table named to lowercase
lower_case_table_names=1

# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M

# Maximum simultaneous connections allowed (default:100)
max_connections=256

# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)

# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0

# Do not cache results (default:1)
query_cache_type=0

# Do not use the privileges mechanisms
skip_grant_tables

# Do not listen for TCP/IP connections at all
skip_networking

# The number of open tables for all threads. (default:64)
table_open_cache=200

# How many threads the server should cache for reuse (default:0)
thread_cache_size=3

# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000

# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K

# KUBUNTU:
# Unset the export dir check as only the full mysql-server package creates it
secure_file_priv=

# KUBUNTU:
# workaround for 5.7 being more strict with column types
# (reverts to 5.6 behavior)
sql_mode=NO_ENGINE_SUBSTITUTION

[client]
default-character-set=utf8


Test 9:  SUCCESS
--------

akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
akonadictl 5.13.3 (19.12.3)


Test 10:  ERROR
--------

Akonadi control process not registered at D-Bus.
Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.

Test 11:  ERROR
--------

Akonadi server process not registered at D-Bus.
Details: The Akonadi server process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.

Test 12:  SKIP
--------

Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.

Test 13:  ERROR
--------

No resource agents found.
Details: No resource agents have been found, Akonadi is not usable without at least one. This usually means that no resource agents are installed or that there is a setup problem. The following paths have been searched: '/usr/share/akonadi/agents'. The XDG_DATA_DIRS environment variable is set to '/usr/share/Lubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop'; make sure this includes all paths where Akonadi agents are installed.

Directory listing of '/usr/share/akonadi/agents':
akonadiindexingagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
ewsmtaresource.desktop
ewsresource.desktop
followupreminder.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kolabresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
migrationagent.desktop
mixedmaildirresource.desktop
newmailnotifieragent.desktop
notesagent.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
tomboynotesresource.desktop
unifiedmailboxagent.desktop
vcarddirresource.desktop
vcardresource.desktop

Environment variable XDG_DATA_DIRS is set to '/usr/share/Lubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop'

Test 14:  SUCCESS
--------

No current Akonadi server error log found.
Details: The Akonadi server did not report any errors during its current startup.

Test 15:  SUCCESS
--------

No previous Akonadi server error log found.
Details: The Akonadi server did not report any errors during its previous startup.

Test 16:  SUCCESS
--------

No current Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its current startup.

Test 17:  SUCCESS
--------

No previous Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its previous startup.

Dernière modification par bisane (Le 07/11/2020, à 17:58)

Hors ligne

#8 Le 08/11/2020, à 19:38

bisane

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

Toujours personne ?

J'ai essayé de désinstaller puis réinstaller akonadi et kalarm... rien ne change...

C'est quoi, mysql_socket ?

Dernière modification par bisane (Le 08/11/2020, à 19:39)

Hors ligne

#9 Le 25/11/2020, à 19:06

bisane

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

Bonjour tout le monde !

Je n'ai pas reçu énormément d'aide sur ce fil, mais comme j'imagine que je ne suis et ne serai pas la seule à rencontrer ce problème, qui semble tenir essentiellement à Akonadi, et peut donc se produire aussi sur Kmail, Korganizer, Kjots, je donne la solution : Akonadi / Kalarm : lubuntu 20.04

Hors ligne

#10 Le 25/11/2020, à 19:34

xubu1957

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

Bonjour,

Pour éditer ta discussion et rajouter [Résolu] au début du titre, il faut utiliser le bouton Modifier au bas de ton premier message.

Merci pour avoir fourni cette solution. wink


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#11 Le 25/11/2020, à 19:38

bisane

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

C'est fait ! smile

Hors ligne

#12 Le 17/12/2023, à 18:38

bisane

Re : [Résolu] Upgrade vers 20.04 : Kalarm ne fonctionne plus (Akonadi)

Je reviens sur ce sujet, car j'ai à nouveau rencontré le même problème après une installation d'un site en local utilisant mysql... Il semble y avoir une légère incompatiblité (dont je précise que je ne me l'explique en rien).
J'ai réussi à contourner la difficulté, après bien des errements, en passant Akonadi à SQLite, en créant un nouveau akonadiserverrc ($HOME/.config/akonadi/), contenant :
[%General]
Driver=QSQLITE

Trouvé ici : https://userbase.kde.org/Akonadi/fr

Si ça peut servir à d'autres ! tongue

Dernière modification par bisane (Le 17/12/2023, à 18:39)

Hors ligne