#26 Le 24/06/2017, à 10:44
- Bougron
Re : Fichier Impossible à Supprimer Erreur d'entrée/sortie
Bonjour
Les commandes pourraient mieux parler...
Essaies une nouvelle série de trois
sudo smartctl -d ata -s on -T verypermissive -a /dev/sdb
sudo smartctl -d auto -s on -T verypermissive -a /dev/sdb
sudo smartctl -d test -s on -T verypermissive -a /dev/sdb
Hors ligne
#27 Le 24/06/2017, à 11:08
- artexop
Re : Fichier Impossible à Supprimer Erreur d'entrée/sortie
sudo smartctl -d ata -s on -T verypermissive -a /dev/sdb
smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.9.29-5-osmc] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: Invalid argument
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
Local Time is: Sat Jun 24 11:07:05 2017 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enable failed: Invalid argument
Read SMART Data failed: Invalid argument
=== START OF READ SMART DATA SECTION ===
Error SMART Status command failed: Invalid argument
SMART Status command failed: Invalid argument
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
Read SMART Error Log failed: Invalid argument
Read SMART Self-test Log failed: Invalid argument
Selective Self-tests/Logging not supported
sudo smartctl -d auto -s on -T verypermissive -a /dev/sdb
smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.9.29-5-osmc] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb: Unknown USB bridge [0x1058:0x25da (0x3002)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
sudo smartctl -d test -s on -T verypermissive -a /dev/sdb
smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.9.29-5-osmc] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb: Unknown USB bridge [0x1058:0x25da (0x3002)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
Hors ligne
#28 Le 24/06/2017, à 12:51
- Bougron
Re : Fichier Impossible à Supprimer Erreur d'entrée/sortie
Cela fait déjà 8 types essayés sans succès. Je te donne la liste des derniers connus.
sudo smartctl -d marvel -s on -T verypermissive -a /dev/sdb
sudo smartctl -d areca -s on -T verypermissive -a /dev/sdb
sudo smartctl -d 3ware -s on -T verypermissive -a /dev/sdb
sudo smartctl -d hpt -s on -T verypermissive -a /dev/sdb
sudo smartctl -d megaraid -s on -T verypermissive -a /dev/sdb
sudo smartctl -d aacraid -s on -T verypermissive -a /dev/sdb
sudo smartctl -d cciss -s on -T verypermissive -a /dev/sdb
Hors ligne
#29 Le 24/06/2017, à 22:09
- moko138
Re : Fichier Impossible à Supprimer Erreur d'entrée/sortie
En #, on avait :
/dev/sdb: Unknown USB bridge [0x1058:0x25da (0x3002)]
On sait que "0x1058", c'est "Western Digital". Et que 0x1058:0x25da n'est pas répertorié sur
ht tps://www.smartmontools.org/wiki/Supported_USB-Devices
Je reporte ici le dernier retour du #24 :
sudo smartctl -d scsi -s on -T verypermissive -a /dev/sdb
osmc@osmc:~$ sudo smartctl -d scsi -s on -T verypermissive -a /dev/sdb
smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.9.29-5-osmc] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: WD
Product: My Book 25DA
Revision: 3002
Compliance: SPC-4
User Capacity: 8 001 562 869 760 bytes [8,00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x50014eef0a0d20a2
Serial number: VKG3GVVP
Device type: disk
Local Time is: Sat Jun 24 10:14:35 2017 CEST
SMART support is: Unavailable - device lacks SMART capability.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
unable to fetch IEC (SMART) mode page [unsupported field in scsi command]
=== START OF READ SMART DATA SECTION ===
Error Counter logging not supported
No self-tests have been logged
Et je crains que WD n'ait mal fait son boulot, et que nous n'obtenions pas plus précis. Sauf mise à jour du micrologiciel, si elle est disponible.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne