Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 19/01/2018, à 11:25

Bougron

[Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonjour

J'ai un gros problème avec le réseau FREEWIFI. Voir cette discussion. https://forum.ubuntu-fr.org/viewtopic.php?id=2020749
Il semble que je réussisse à me connecter en version 16.04 à peu près correctement.
Je suis en train de constater que cela semble totalement impossible avec la version 18.04 (C'est idem, avec la version 17.10).
Je communique actuellement via le relais wifi d'un IPAD
Je viens de faire plusieurs boots alternativement entre 18.04 et 16.04 pour constater que je n'accroche pas la connexion en 18.04 mais que je l'accroche en version 16.04.
Je précise qu'actuellement, l'ordinateur 32 bits est à l'arrêt et que la version 18.04 est en bon état de mise à jour.

a@a:~$ dpkg -l | grep linux-headers
ii  linux-headers-4.13.0-17                    4.13.0-17.20                             all          Header files related to Linux kernel version 4.13.0
ii  linux-headers-4.13.0-17-generic            4.13.0-17.20                             amd64        Linux kernel headers for version 4.13.0 on 64 bit x86 SMP
ii  linux-headers-4.13.0-25                    4.13.0-25.29                             all          Header files related to Linux kernel version 4.13.0
ii  linux-headers-4.13.0-25-generic            4.13.0-25.29                             amd64        Linux kernel headers for version 4.13.0 on 64 bit x86 SMP
ii  linux-headers-generic                      4.13.0.25.26                             amd64        Generic Linux kernel headers
a@a:~$ 

La vision freewifi actuelle (il n'y a pas astérisque puisque je suis connecté via un ipad).

a@a:~$ sudo nmcli dev wifi | grep FreeWifi | grep -v secure
   FreeWifi         Infra  1     54 Mo/s  34      ▂▄__  --          
   FreeWifi         Infra  11    54 Mo/s  34      ▂▄__  --          
   FreeWifi         Infra  1     54 Mo/s  22      ▂___  --          
   FreeWifi         Infra  1     54 Mo/s  20      ▂___  --          
   FreeWifi         Infra  13    54 Mo/s  20      ▂___  --          
   FreeWifi         Infra  1     54 Mo/s  19      ▂___  --          
a@a:~$

La puissance actuelle de l'émission  du portable est de 15 dBm.

a@a:~$ sudo      iwconfig 
wlp8s0    IEEE 802.11  ESSID:"iPad "  
          Mode:Managed  Frequency:2.412 GHz  Access Point: 62:FE:C5:C6:F3:B0   
          Bit Rate=1 Mb/s   Tx-Power=15 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=70/70  Signal level=-38 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:4  Invalid misc:87   Missed beacon:0

enp9s0    no wireless extensions.

lo        no wireless extensions.

enp0s20u2c4i2  no wireless extensions.

a@a:~$ 

Elle est modifiable en diminution mais pas en augmentation.

a@a:~$ sudo iwconfig wlp8s0 txpower 11
a@a:~$ sudo iwconfig wlp8s0 | grep Power
          Bit Rate=1 Mb/s   Tx-Power=11 dBm   
          Power Management:off
a@a:~$ sudo iwconfig wlp8s0 txpower 17
a@a:~$ sudo iwconfig wlp8s0 | grep Power
          Bit Rate=1 Mb/s   Tx-Power=15 dBm   
          Power Management:off
a@a:~$ 

Les pings initiaux.

a@a:~$ ping 212.27.40.236
connect: Le réseau n'est pas accessible
a@a:~$ ping wifi.free.fr
ping: wifi.free.fr: Nom ou service inconnu
a@a:~$ ping 8.8.8.8
connect: Le réseau n'est pas accessible

Je vais  bientôt joindre une capture d'écran montrant que je n'arrive pas à activer le réseau FREEWIFI.
Une interrogation: La version 18.04  veut se débarrasser de pas mal de choses. Savez-vous si le FREEWIFI est dans la liste?
NOTA, Je pense avoir une piste qui retombe encore de nouveau sur la version firefox qui me semble arriérée.... 57.0.1
Dans cette version, il n'y a pas affichage du message de ce style
"Ce réseau nécessite que vous vous connectiez à un compte pour utiliser internet"
qui normalement fait dérouter sur https://detectportail.firefox.com
qui fait parler de lui d'une façon pas très claire https://support.mozilla.org/fr/questions/1157121

Je ne comprends plus rien du tout.     La grille d'accueil  de freewifi vient de s'afficher.  Je ne comprends pas  par quelle manipulation ...   Fallait-il se contenter d'attendre une heure pour qu'elle s'affiche??? ou que le réseau soit capable de répondre en moins de 50 millisecondes ?

a@a:~$ sudo nmcli dev wifi | grep FreeWifi | grep -v secure

(process:4893): libnm-WARNING **: no object known for /org/freedesktop/NetworkManager/ActiveConnection/13

*  FreeWifi         Infra  1     54 Mo/s  40      ▂▄__  --          
   FreeWifi         Infra  10    54 Mo/s  39      ▂▄__  --          
   FreeWifi         Infra  2     54 Mo/s  27      ▂___  --          
   FreeWifi         Infra  1     54 Mo/s  25      ▂___  --          
   FreeWifi         Infra  1     54 Mo/s  22      ▂___  --          
   FreeWifi         Infra  1     54 Mo/s  22      ▂___  --          
   FreeWifi         Infra  1     54 Mo/s  12      ▂___  --          
a@a:~$ 

Je ne comprends pas trop le warning

$ dmesg | tail -200
[  567.660804] wlp8s0: send auth to e4:9e:12:0e:b0:89 (try 1/3)
[  567.664628] wlp8s0: authenticated
[  567.665224] wlp8s0: associate with e4:9e:12:0e:b0:89 (try 1/3)
[  567.670202] wlp8s0: RX AssocResp from e4:9e:12:0e:b0:89 (capab=0x401 status=0 aid=4)
[  567.670349] wlp8s0: associated
[  598.497861] wlp8s0: deauthenticating from e4:9e:12:0e:b0:89 by local choice (Reason: 3=DEAUTH_LEAVING)
[  630.046146] wlp8s0: authenticate with 62:fe:c5:c6:f3:b0
[  630.059886] wlp8s0: send auth to 62:fe:c5:c6:f3:b0 (try 1/3)
[  630.061878] wlp8s0: authenticated
[  630.064953] wlp8s0: associate with 62:fe:c5:c6:f3:b0 (try 1/3)
[  630.069614] wlp8s0: RX AssocResp from 62:fe:c5:c6:f3:b0 (capab=0x411 status=0 aid=1)
[  630.069765] wlp8s0: associated
[ 3589.318352] wlp8s0: deauthenticating from 62:fe:c5:c6:f3:b0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3612.098156] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[ 3612.157708] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[ 3614.010263] wlp8s0: authenticate with 62:fe:c5:c6:f3:b0
[ 3614.024669] wlp8s0: send auth to 62:fe:c5:c6:f3:b0 (try 1/3)
[ 3614.026636] wlp8s0: authenticated
[ 3614.029638] wlp8s0: associate with 62:fe:c5:c6:f3:b0 (try 1/3)
[ 3614.037374] wlp8s0: RX AssocResp from 62:fe:c5:c6:f3:b0 (capab=0x411 status=0 aid=1)
[ 3614.037522] wlp8s0: associated
[ 3614.037578] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[ 3619.391682] wlp8s0: deauthenticating from 62:fe:c5:c6:f3:b0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3620.762599] wlp8s0: authenticate with e4:9e:12:0e:b0:89
[ 3620.780538] wlp8s0: send auth to e4:9e:12:0e:b0:89 (try 1/3)
[ 3620.785424] wlp8s0: authenticated
[ 3620.789505] wlp8s0: associate with e4:9e:12:0e:b0:89 (try 1/3)
[ 3620.895846] wlp8s0: RX AssocResp from e4:9e:12:0e:b0:89 (capab=0x401 status=0 aid=3)
[ 3620.896015] wlp8s0: associated
[ 3666.685810] wlp8s0: deauthenticating from e4:9e:12:0e:b0:89 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3667.711044] wlp8s0: authenticate with 62:fe:c5:c6:f3:b0
[ 3667.723669] wlp8s0: send auth to 62:fe:c5:c6:f3:b0 (try 1/3)
[ 3667.725758] wlp8s0: authenticated
[ 3667.727694] wlp8s0: associate with 62:fe:c5:c6:f3:b0 (try 1/3)
[ 3667.731998] wlp8s0: RX AssocResp from 62:fe:c5:c6:f3:b0 (capab=0x411 status=0 aid=1)
[ 3667.732141] wlp8s0: associated
[ 3733.011036] wlp8s0: deauthenticating from 62:fe:c5:c6:f3:b0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3734.373508] wlp8s0: authenticate with 62:fe:c5:c6:f3:b0
[ 3734.390363] wlp8s0: send auth to 62:fe:c5:c6:f3:b0 (try 1/3)
[ 3734.392436] wlp8s0: authenticated
[ 3734.395416] wlp8s0: associate with 62:fe:c5:c6:f3:b0 (try 1/3)
[ 3734.402151] wlp8s0: RX AssocResp from 62:fe:c5:c6:f3:b0 (capab=0x411 status=0 aid=1)
[ 3734.402302] wlp8s0: associated
[ 3743.041141] wlp8s0: deauthenticating from 62:fe:c5:c6:f3:b0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3744.410577] wlp8s0: authenticate with e4:9e:12:0e:b0:89
[ 3744.427647] wlp8s0: send auth to e4:9e:12:0e:b0:89 (try 1/3)
[ 3744.495982] wlp8s0: send auth to e4:9e:12:0e:b0:89 (try 2/3)
[ 3744.503031] wlp8s0: authenticated
[ 3744.504840] wlp8s0: associate with e4:9e:12:0e:b0:89 (try 1/3)
[ 3744.681193] wlp8s0: associate with e4:9e:12:0e:b0:89 (try 2/3)
[ 3744.785624] wlp8s0: associate with e4:9e:12:0e:b0:89 (try 3/3)
[ 3744.924025] wlp8s0: association with e4:9e:12:0e:b0:89 timed out
[ 3745.311579] wlp8s0: authenticate with 16:e9:ff:f6:65:4a
[ 3745.327936] wlp8s0: send auth to 16:e9:ff:f6:65:4a (try 1/3)
[ 3745.489921] wlp8s0: send auth to 16:e9:ff:f6:65:4a (try 2/3)
[ 3745.610489] wlp8s0: send auth to 16:e9:ff:f6:65:4a (try 3/3)
[ 3745.713719] wlp8s0: authentication with 16:e9:ff:f6:65:4a timed out
[ 3746.103606] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3746.120141] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3746.123353] wlp8s0: authenticated
[ 3746.125053] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3746.128484] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3746.128636] wlp8s0: associated
[ 3749.784352] wlp8s0: disconnect from AP f4:ca:e5:fd:a1:21 for new auth to 46:70:e7:1f:f3:b6
[ 3749.791604] wlp8s0: authenticate with 46:70:e7:1f:f3:b6
[ 3749.804344] wlp8s0: send auth to 46:70:e7:1f:f3:b6 (try 1/3)
[ 3749.842651] wlp8s0: authenticated
[ 3749.845494] wlp8s0: associate with 46:70:e7:1f:f3:b6 (try 1/3)
[ 3749.867069] wlp8s0: RX AssocResp from 46:70:e7:1f:f3:b6 (capab=0x401 status=0 aid=1)
[ 3749.867218] wlp8s0: associated
[ 3755.822934] wlp8s0: deauthenticating from 46:70:e7:1f:f3:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3757.188599] wlp8s0: authenticate with f4:ca:e5:c2:52:75
[ 3757.205585] wlp8s0: send auth to f4:ca:e5:c2:52:75 (try 1/3)
[ 3757.269603] wlp8s0: send auth to f4:ca:e5:c2:52:75 (try 2/3)
[ 3757.311145] wlp8s0: send auth to f4:ca:e5:c2:52:75 (try 3/3)
[ 3757.387855] wlp8s0: authentication with f4:ca:e5:c2:52:75 timed out
[ 3757.792237] wlp8s0: authenticate with e4:9e:12:77:22:24
[ 3757.809751] wlp8s0: send auth to e4:9e:12:77:22:24 (try 1/3)
[ 3757.923304] wlp8s0: send auth to e4:9e:12:77:22:24 (try 2/3)
[ 3758.016355] wlp8s0: send auth to e4:9e:12:77:22:24 (try 3/3)
[ 3758.114219] wlp8s0: authentication with e4:9e:12:77:22:24 timed out
[ 3758.524854] wlp8s0: authenticate with 46:70:e7:1f:f3:b6
[ 3758.541629] wlp8s0: send auth to 46:70:e7:1f:f3:b6 (try 1/3)
[ 3758.573595] wlp8s0: authenticated
[ 3758.574754] wlp8s0: associate with 46:70:e7:1f:f3:b6 (try 1/3)
[ 3758.742828] wlp8s0: associate with 46:70:e7:1f:f3:b6 (try 2/3)
[ 3758.850863] wlp8s0: associate with 46:70:e7:1f:f3:b6 (try 3/3)
[ 3758.954880] wlp8s0: association with 46:70:e7:1f:f3:b6 timed out
[ 3759.281908] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3759.297942] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3759.310849] wlp8s0: authenticated
[ 3759.318988] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3759.324147] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3759.324295] wlp8s0: associated
[ 3762.729447] wlp8s0: disconnect from AP f4:ca:e5:fd:a1:21 for new auth to 14:0c:76:e4:42:99
[ 3762.757875] wlp8s0: authenticate with 14:0c:76:e4:42:99
[ 3762.770565] wlp8s0: send auth to 14:0c:76:e4:42:99 (try 1/3)
[ 3762.834708] wlp8s0: send auth to 14:0c:76:e4:42:99 (try 2/3)
[ 3762.915383] wlp8s0: send auth to 14:0c:76:e4:42:99 (try 3/3)
[ 3762.956190] wlp8s0: authentication with 14:0c:76:e4:42:99 timed out
[ 3763.281213] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3763.298518] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3763.301247] wlp8s0: authenticated
[ 3763.303563] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3763.306911] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3763.307086] wlp8s0: associated
[ 3768.287396] wlp8s0: deauthenticating from f4:ca:e5:fd:a1:21 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3769.642366] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3769.655181] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3769.657155] wlp8s0: authenticated
[ 3769.660475] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3769.663824] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3769.663972] wlp8s0: associated
[ 3770.408728] wlp8s0: deauthenticating from f4:ca:e5:fd:a1:21 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3771.467703] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3771.480968] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3771.484722] wlp8s0: authenticated
[ 3771.488646] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3771.491990] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3771.492140] wlp8s0: associated
[ 3777.532453] wlp8s0: deauthenticating from f4:ca:e5:fd:a1:21 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3777.618326] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3777.631072] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3777.633003] wlp8s0: authenticated
[ 3777.633585] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3777.641561] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3777.641709] wlp8s0: associated
[ 3780.720532] wlp8s0: deauthenticating from f4:ca:e5:fd:a1:21 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3781.708598] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3781.721771] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3781.724568] wlp8s0: authenticated
[ 3781.726253] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3781.729745] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3781.729893] wlp8s0: associated
[ 3788.287878] wlp8s0: disconnect from AP f4:ca:e5:fd:a1:21 for new auth to 42:03:81:d1:d4:52
[ 3788.309610] wlp8s0: authenticate with 42:03:81:d1:d4:52
[ 3788.322245] wlp8s0: send auth to 42:03:81:d1:d4:52 (try 1/3)
[ 3788.487362] wlp8s0: send auth to 42:03:81:d1:d4:52 (try 2/3)
[ 3788.643701] wlp8s0: send auth to 42:03:81:d1:d4:52 (try 3/3)
[ 3788.745408] wlp8s0: authentication with 42:03:81:d1:d4:52 timed out
[ 3789.069603] wlp8s0: authenticate with 68:a3:78:1c:05:86
[ 3789.086470] wlp8s0: send auth to 68:a3:78:1c:05:86 (try 1/3)
[ 3789.169745] wlp8s0: send auth to 68:a3:78:1c:05:86 (try 2/3)
[ 3789.317071] wlp8s0: send auth to 68:a3:78:1c:05:86 (try 3/3)
[ 3789.420181] wlp8s0: authentication with 68:a3:78:1c:05:86 timed out
[ 3789.681696] wlp8s0: authenticate with 68:a3:78:1a:03:ad
[ 3789.694504] wlp8s0: send auth to 68:a3:78:1a:03:ad (try 1/3)
[ 3789.799585] wlp8s0: send auth to 68:a3:78:1a:03:ad (try 2/3)
[ 3789.954978] wlp8s0: send auth to 68:a3:78:1a:03:ad (try 3/3)
[ 3790.053207] wlp8s0: authentication with 68:a3:78:1a:03:ad timed out
[ 3790.245277] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3790.262688] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3790.264951] wlp8s0: authenticated
[ 3790.267595] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3790.274109] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3790.274284] wlp8s0: associated
[ 3800.036397] wlp8s0: deauthenticating from f4:ca:e5:fd:a1:21 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3801.030149] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3801.042859] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3801.046132] wlp8s0: authenticated
[ 3801.049129] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3801.052476] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3801.052623] wlp8s0: associated
[ 3807.490356] wlp8s0: disconnect from AP f4:ca:e5:fd:a1:21 for new auth to e4:9e:12:cd:94:d5
[ 3807.497371] wlp8s0: authenticate with e4:9e:12:cd:94:d5
[ 3807.510037] wlp8s0: send auth to e4:9e:12:cd:94:d5 (try 1/3)
[ 3807.560951] wlp8s0: send auth to e4:9e:12:cd:94:d5 (try 2/3)
[ 3807.632646] wlp8s0: send auth to e4:9e:12:cd:94:d5 (try 3/3)
[ 3807.718743] wlp8s0: authentication with e4:9e:12:cd:94:d5 timed out
[ 3808.217704] usb 1-1.3: USB disconnect, device number 6
[ 3809.942853] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[ 3810.486662] usb 1-1.3: new full-speed USB device number 7 using ehci-pci
[ 3810.595674] usb 1-1.3: New USB device found, idVendor=0930, idProduct=0220
[ 3810.595676] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3810.777661] usb 1-1.3: USB disconnect, device number 7
[ 3811.006681] usb 1-1.3: new full-speed USB device number 8 using ehci-pci
[ 3811.751990] wlp8s0: authenticate with f4:ca:e5:c2:52:75
[ 3811.769732] wlp8s0: send auth to f4:ca:e5:c2:52:75 (try 1/3)
[ 3811.883332] wlp8s0: send auth to f4:ca:e5:c2:52:75 (try 2/3)
[ 3811.941154] wlp8s0: send auth to f4:ca:e5:c2:52:75 (try 3/3)
[ 3811.999569] wlp8s0: authentication with f4:ca:e5:c2:52:75 timed out
[ 3812.401627] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[ 3812.418121] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[ 3812.420091] wlp8s0: authenticated
[ 3812.422902] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[ 3812.426973] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[ 3812.427121] wlp8s0: associated
[ 3812.427163] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[ 3816.163510] usb 1-1.3: device descriptor read/64, error -110
[ 3821.569706] usb 1-1.3: New USB device found, idVendor=0930, idProduct=0220
[ 3821.569711] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3822.886974] wlp8s0: authenticate with e4:9e:12:0e:b0:89
[ 3822.903684] wlp8s0: send auth to e4:9e:12:0e:b0:89 (try 1/3)
[ 3822.905603] wlp8s0: authenticated
[ 3822.909173] wlp8s0: associate with e4:9e:12:0e:b0:89 (try 1/3)
[ 3822.913624] wlp8s0: RX AssocResp from e4:9e:12:0e:b0:89 (capab=0x401 status=0 aid=4)
[ 3822.913834] wlp8s0: associated
[ 3963.130272] ipheth 3-2:4.2: ipheth_rcvbulk_callback: urb status: -71
[ 3963.131016] usb 3-2: USB disconnect, device number 4
[ 3963.178566] ipheth 3-2:4.2: Apple iPhone USB Ethernet now disconnected

Dernière modification par Bougron (Le 27/04/2018, à 19:55)

Hors ligne

#2 Le 19/01/2018, à 12:32

xubu1957

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonjour,

En cherchant à partir de :

aborting authentication  by local choice (Reason: 3=DEAUTH_LEAVING)

J'avais trouvé ce fil récent > ubuntu-17-04-x64-desktop-can-not-connect-wifi-ap

et solution utilisée dans > connection wifi


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 19/01/2018, à 17:13

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonjour Xubu1957
J'ai fait comme j'ai pu.

Create:
sudo gedit /etc/NetworkManager/conf.d/disable-random-mac.conf  
With:
[device-wlp8s0]  
match-device=wlp8s0  
wifi.scan-rand-mac-address=no  

And replace both instances of wlan0 above with the interface name you found earlier.   ????????

Restart network-manager service.
sudo service network-manager restart

Je ne sais pas ce que cela va donner

La connexion était arrivée mystérieusement, elle a disparu tout aussi mystérieusement Probablement pendant la pose déjeuner.
Je ne peux la remettre en route!
Donc quelques capures d'écrans
1) Le rejet de connexion quasi instantané http://pix.toile-libre.org/?img=1516377706.png

2) La liste des appareils wifi frouvés http://pix.toile-libre.org/?img=1516377853.png

3) L'état de la ligne wifi http://pix.toile-libre.org/?img=1516377978.png
                                          http://pix.toile-libre.org/?img=1516378638.png
                                          http://pix.toile-libre.org/?img=1516378089.png
                                          http://pix.toile-libre.org/?img=1516378143.png
On y voit IPV6 déactivé sur conseil
                                          http://pix.toile-libre.org/?img=1516378253.png
Evidemment, un échange non sécurisé
Pendant le temps que je préparais cet échange, la connxion de l'autre ordinateur au réseau wifi reste impossible.
Si c'est un problème firefox, il est inutile que je regarde avec windows!!!!

Dernière modification par Bougron (Le 19/01/2018, à 17:18)

Hors ligne

#4 Le 19/01/2018, à 19:35

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

En complément, quelques manipulations supplémentaires,
La trace du dmesg après le restart du réseau.

[30130.219194] wlp8s0: disconnect from AP f4:ca:e5:fd:a1:21 for new auth to e4:9e:12:76:0f:92
[30130.256703] wlp8s0: authenticate with e4:9e:12:76:0f:92
[30130.274164] wlp8s0: send auth to e4:9e:12:76:0f:92 (try 1/3)
[30130.367760] wlp8s0: send auth to e4:9e:12:76:0f:92 (try 2/3)
[30130.435200] wlp8s0: send auth to e4:9e:12:76:0f:92 (try 3/3)
[30130.524014] wlp8s0: authentication with e4:9e:12:76:0f:92 timed out
[30130.848081] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[30130.867145] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[30130.874434] wlp8s0: authenticated
[30130.881879] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[30130.885213] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[30130.885358] wlp8s0: associated
[30513.417761] wlp8s0: deauthenticating from f4:ca:e5:fd:a1:21 by local choice (Reason: 3=DEAUTH_LEAVING)
[30513.456254] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[30513.940243] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
[30513.948445] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[30513.966322] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[30514.198133] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[30516.083024] wlp8s0: authenticate with e4:9e:12:0e:b0:89
[30516.098165] wlp8s0: send auth to e4:9e:12:0e:b0:89 (try 1/3)
[30516.109159] wlp8s0: authenticated
[30516.113278] wlp8s0: associate with e4:9e:12:0e:b0:89 (try 1/3)
[30516.116818] wlp8s0: RX AssocResp from e4:9e:12:0e:b0:89 (capab=0x401 status=0 aid=3)
[30516.116960] wlp8s0: associated
[30516.116994] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
a@a:~$

Cependant, le problème persiste. Je ne peux toujours pas ouvrir réseau.
http://pix.toile-libre.org/?img=1516386412.png
Vous noterez que cet affichage a masqué la partie gauche et la partie supérieure de  l'écran.... et surtout que le bouton "se connecter" est grisé;   Problème d'habilitation ?

NOTA: Je ne sais pas combien de temps FREEWIFI maintient la connexion ouverte sans échange de donnée. il finira bien par la fermer. Peut-être qu'avec un redémarrage propre demain, cela pourra de nouveau se connecter (Une seule fois ?)!

Sur le micro 32 bits  en 16.04 qui se connecte bien et qui tient asez bien la connexion, je relève aussi

lu16043@L:~$ dmesg | grep =DEAUTH
[ 4880.278741] wlp0s9: deauthenticating from 46:70:e7:1f:f3:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4928.043639] wlp0s9: deauthenticating from 46:70:e7:1f:f3:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4975.094023] wlp0s9: deauthenticating from 46:70:e7:1f:f3:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9693.773091] wlp0s9: deauthenticating from 46:70:e7:1f:f3:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9742.041924] wlp0s9: deauthenticating from 46:70:e7:1f:f3:b6 by local choice (Reason: 3=DEAUTH_LEAVING)
lu16043@L:~$

Dernière modification par Bougron (Le 19/01/2018, à 19:55)

Hors ligne

#5 Le 20/01/2018, à 00:53

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonsoir

J'ai fini par booter.
Finalement,  la connexion est actuellement opérationnelle je ne sais pour combien de temps. J'ai constaté que le message anormal n'est plus présent uniquement après l'opération de boot.
La trace DMSEG

[   30.948133] nouveau 0000:01:00.0: DRM: resuming object tree...
[   31.031238] nouveau 0000:01:00.0: DRM: resuming fence...
[   31.532060] usb 1-1.3: device descriptor read/64, error -110
[   34.467351] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
[   34.471251] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
[   34.523012] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   34.536437] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   34.819906] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   36.032132] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[   36.032364] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   36.032371] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[   36.032617] nouveau 0000:01:00.0: DRM: evicting buffers...
[   36.032620] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   36.032640] nouveau 0000:01:00.0: DRM: suspending fence...
[   36.033899] nouveau 0000:01:00.0: DRM: suspending object tree...
[   36.669540] wlp8s0: authenticate with e4:9e:12:0e:b0:89
[   36.686936] wlp8s0: send auth to e4:9e:12:0e:b0:89 (try 1/3)
[   36.690070] wlp8s0: authenticated
[   36.692057] wlp8s0: associate with e4:9e:12:0e:b0:89 (try 1/3)
[   36.696917] wlp8s0: RX AssocResp from e4:9e:12:0e:b0:89 (capab=0x401 status=0 aid=2)
[   36.697072] wlp8s0: associated
[   36.697082] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[   36.937520] usb 1-1.3: New USB device found, idVendor=0930, idProduct=0220
[   36.937525] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   37.002167] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.002169] Bluetooth: BNEP filters: protocol multicast
[   37.002172] Bluetooth: BNEP socket layer initialized
[   38.461819] wlp8s0: authenticate with e4:9e:12:ee:6a:d9
[   38.478915] wlp8s0: send auth to e4:9e:12:ee:6a:d9 (try 1/3)
[   38.480860] wlp8s0: authenticated
[   38.484466] wlp8s0: associate with e4:9e:12:ee:6a:d9 (try 1/3)
[   38.499122] wlp8s0: RX AssocResp from e4:9e:12:ee:6a:d9 (capab=0x401 status=0 aid=1)
[   38.499268] wlp8s0: associated
[   50.068168] nouveau 0000:01:00.0: DRM: resuming object tree...
[   50.149565] nouveau 0000:01:00.0: DRM: resuming fence...
[   51.721897] Bluetooth: RFCOMM TTY layer initialized
[   51.721903] Bluetooth: RFCOMM socket layer initialized
[   51.721907] Bluetooth: RFCOMM ver 1.11
[   54.663977] rfkill: input handler disabled
[   56.028137] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[   56.028230] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   56.028233] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[   56.028357] nouveau 0000:01:00.0: DRM: evicting buffers...
[   56.035626] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   56.035643] nouveau 0000:01:00.0: DRM: suspending fence...
[   56.036850] nouveau 0000:01:00.0: DRM: suspending object tree...
[   82.050623] wlp8s0: deauthenticating from e4:9e:12:ee:6a:d9 by local choice (Reason: 3=DEAUTH_LEAVING)
[   83.136594] wlp8s0: authenticate with 16:e9:ff:f6:65:4a
[   83.149211] wlp8s0: send auth to 16:e9:ff:f6:65:4a (try 1/3)
[   83.152250] wlp8s0: authenticated
[   83.156085] wlp8s0: associate with 16:e9:ff:f6:65:4a (try 1/3)
[   83.229978] wlp8s0: associate with 16:e9:ff:f6:65:4a (try 2/3)
[   83.232765] wlp8s0: RX AssocResp from 16:e9:ff:f6:65:4a (capab=0x401 status=0 aid=1)
[   83.232936] wlp8s0: associated
[   88.542705] wlp8s0: disconnect from AP 16:e9:ff:f6:65:4a for new auth to f4:ca:e5:c2:52:75
[   88.562448] wlp8s0: authenticate with f4:ca:e5:c2:52:75
[   88.575068] wlp8s0: send auth to f4:ca:e5:c2:52:75 (try 1/3)
[   88.645562] wlp8s0: send auth to f4:ca:e5:c2:52:75 (try 2/3)
[   88.700080] wlp8s0: send auth to f4:ca:e5:c2:52:75 (try 3/3)
[   88.766848] wlp8s0: authentication with f4:ca:e5:c2:52:75 timed out
[   89.161647] wlp8s0: authenticate with 16:e9:ff:f6:65:4a
[   89.179155] wlp8s0: send auth to 16:e9:ff:f6:65:4a (try 1/3)
[   89.198585] wlp8s0: authenticated
[   89.200065] wlp8s0: associate with 16:e9:ff:f6:65:4a (try 1/3)
[   89.218860] wlp8s0: RX AssocResp from 16:e9:ff:f6:65:4a (capab=0x401 status=0 aid=1)
[   89.219028] wlp8s0: associated
[  196.791650] wlp8s0: disconnect from AP 16:e9:ff:f6:65:4a for new auth to e4:9e:12:cd:94:d5
[  196.814980] wlp8s0: authenticate with e4:9e:12:cd:94:d5
[  196.827544] wlp8s0: send auth to e4:9e:12:cd:94:d5 (try 1/3)
[  196.873441] wlp8s0: send auth to e4:9e:12:cd:94:d5 (try 2/3)
[  196.930783] wlp8s0: send auth to e4:9e:12:cd:94:d5 (try 3/3)
[  196.987614] wlp8s0: authentication with e4:9e:12:cd:94:d5 timed out
[  197.314953] wlp8s0: authenticate with 46:70:e7:1f:f3:b6
[  197.331724] wlp8s0: send auth to 46:70:e7:1f:f3:b6 (try 1/3)
[  197.335999] wlp8s0: authenticated
[  197.336694] wlp8s0: associate with 46:70:e7:1f:f3:b6 (try 1/3)
[  197.417300] wlp8s0: associate with 46:70:e7:1f:f3:b6 (try 2/3)
[  197.429113] wlp8s0: RX AssocResp from 46:70:e7:1f:f3:b6 (capab=0x401 status=0 aid=1)
[  197.429284] wlp8s0: associated
[  227.229063] wlp8s0: authenticate with 16:e9:ff:f6:65:4a
[  227.241745] wlp8s0: send auth to 16:e9:ff:f6:65:4a (try 1/3)
[  227.243704] wlp8s0: authenticated
[  227.248464] wlp8s0: associate with 16:e9:ff:f6:65:4a (try 1/3)
[  227.252161] wlp8s0: RX AssocResp from 16:e9:ff:f6:65:4a (capab=0x401 status=0 aid=1)
[  227.252306] wlp8s0: associated
[  277.188871] wlp8s0: disconnect from AP 16:e9:ff:f6:65:4a for new auth to f4:ca:e5:fd:a1:21
[  277.212331] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[  277.224973] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[  277.226983] wlp8s0: authenticated
[  277.230225] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[  277.233737] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[  277.233902] wlp8s0: associated
[  379.391494] wlp8s0: disconnect from AP f4:ca:e5:fd:a1:21 for new auth to 16:e9:ff:f6:65:4a
[  379.419228] wlp8s0: authenticate with 16:e9:ff:f6:65:4a
[  379.431923] wlp8s0: send auth to 16:e9:ff:f6:65:4a (try 1/3)
[  379.501376] wlp8s0: authenticated
[  379.504821] wlp8s0: associate with 16:e9:ff:f6:65:4a (try 1/3)
[  379.638497] wlp8s0: associate with 16:e9:ff:f6:65:4a (try 2/3)
[  379.792787] wlp8s0: associate with 16:e9:ff:f6:65:4a (try 3/3)
[  379.976795] wlp8s0: association with 16:e9:ff:f6:65:4a timed out
[  380.302307] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[  380.319924] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[  380.323423] wlp8s0: authenticated
[  380.324823] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[  380.329192] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[  380.329338] wlp8s0: associated
[  500.104861] wlp8s0: disconnect from AP f4:ca:e5:fd:a1:21 for new auth to e4:9e:12:ee:6a:d9
[  500.129750] wlp8s0: authenticate with e4:9e:12:ee:6a:d9
[  500.142477] wlp8s0: send auth to e4:9e:12:ee:6a:d9 (try 1/3)
[  500.147807] wlp8s0: authenticated
[  500.151276] wlp8s0: associate with e4:9e:12:ee:6a:d9 (try 1/3)
[  500.159107] wlp8s0: RX AssocResp from e4:9e:12:ee:6a:d9 (capab=0x401 status=0 aid=1)
[  500.159232] wlp8s0: associated
[  741.424127] wlp8s0: disconnect from AP e4:9e:12:ee:6a:d9 for new auth to f4:ca:e5:fd:a1:21
[  741.465222] wlp8s0: authenticate with f4:ca:e5:fd:a1:21
[  741.478807] wlp8s0: send auth to f4:ca:e5:fd:a1:21 (try 1/3)
[  741.481863] wlp8s0: authenticated
[  741.506679] wlp8s0: associate with f4:ca:e5:fd:a1:21 (try 1/3)
[  741.510144] wlp8s0: RX AssocResp from f4:ca:e5:fd:a1:21 (capab=0x401 status=0 aid=1)
[  741.510249] wlp8s0: associated
[  859.609480] wlp8s0: disconnect from AP f4:ca:e5:fd:a1:21 for new auth to e4:9e:12:ee:6a:d9
[  859.633810] wlp8s0: authenticate with e4:9e:12:ee:6a:d9
[  859.647306] wlp8s0: send auth to e4:9e:12:ee:6a:d9 (try 1/3)
[  859.663978] wlp8s0: authenticated
[  859.679346] wlp8s0: associate with e4:9e:12:ee:6a:d9 (try 1/3)
[  859.695121] wlp8s0: RX AssocResp from e4:9e:12:ee:6a:d9 (capab=0x401 status=0 aid=1)
[  859.695227] wlp8s0: associated
a@a:~$ dmesg |grep associated |wc -l
13
a@a:~$

On verra demain ce que cela donnera.

Dernière modification par Bougron (Le 20/01/2018, à 00:56)

Hors ligne

#6 Le 25/01/2018, à 19:28

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonsoir
Une petite surprise ce soir

a@a:~$ sudo  wget -N -t 5 -T 10 https://framagit.org/cracolinux/wificheck/raw/master/wificheck && chmod +x wificheck && ./wificheck
--2018-01-25 19:24:36--  https://framagit.org/cracolinux/wificheck/raw/master/wificheck
Résolution de framagit.org (framagit.org)… 144.76.206.42, 2a01:4f8:200:1302::42
Connexion à framagit.org (framagit.org)|144.76.206.42|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 2012 (2,0K) [text/plain]
Enregistre : «wificheck»

wificheck                                 100%[=====================================================================================>]   1,96K  --.-KB/s    ds 0s      

En-tête de dernière modification manquant — horodatage arrêté.
2018-01-25 19:24:38 (71,7 MB/s) - «wificheck» enregistré [2012/2012]

chmod: modification des droits de 'wificheck': Opération non permise
.....
a@a:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu Bionic Beaver (development branch)"
a@a:~$ 

Dernière modification par Bougron (Le 27/01/2018, à 17:32)

Hors ligne

#7 Le 29/01/2018, à 00:35

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonsoir
Ce logiciel est à mettre à la poubelle
C'est le noyau  4.13.0-25
J'ai décidé de prendre un IPAD pour servir de relais. Que ce soit en émulation WIFI ou ETHERNET les commandes ping 8.8.8.8 ou ping 212.27.40.239 fonctionnent parfaitement
Mais les commandes ping www.google.com ou ping wifi.free.fr   répondent "Nom ou service inconnu"
Nota: Le répertoire /run/resolvconf n'existe plus!   Il est probable que cela soit une fausse manipulation ...

NOTA: Ce que je ne comprends pas, c'est que le noyau précédant ne peut plus assumer une  connexion . A quoi cela sert d'avoir deux noyaux??
?

Dernière modification par Bougron (Le 29/01/2018, à 16:44)

Hors ligne

#8 Le 29/01/2018, à 15:58

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonjour.
Pour le moment, j'ai décidé de réinstaller une nouvelle version de la fabrication journalière.
Cela m'a pris un peu de temps pour télécharger l'iso et l'installer. Finalement, c'est fait.

a@D1804:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu Bionic Beaver (development branch)"
a@D1804:~$ uname -a
Linux D1804 4.13.0-25-generic #29-Ubuntu SMP Mon Jan 8 21:14:41 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Dès le lancement de firefox, la grille d'accueil de FREEWIFI est bien proposée, je peux la remplir et me connecter immédiatement au forum.
Mais cela ne dure que quelques minutes!

a@D1804:~$ date &&ping -i60 8.8.8.8
lundi 29 janvier 2018, 15:05:09 (UTC+0100)
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=58 time=390 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=58 time=275 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=58 time=428 ms
From 10.41.130.123 icmp_seq=5 Destination Host Unreachable
From 10.41.130.123 icmp_seq=6 Destination Host Unreachable
From 10.41.130.123 icmp_seq=9 Destination Host Unreachable
ping: sendmsg: Le réseau n'est pas accessible
ping: sendmsg: Le réseau n'est pas accessible
ping: sendmsg: Le réseau n'est pas accessible
ping: sendmsg: Le réseau n'est pas accessible
ping: sendmsg: Le réseau n'est pas accessible
ping: sendmsg: Le réseau n'est pas accessible
ping: sendmsg: Le réseau n'est pas accessible
ping: sendmsg: Le réseau n'est pas accessible
From 10.41.130.123 icmp_seq=20 Destination Host Unreachable
ping: sendmsg: Le réseau n'est pas accessible
ping: sendmsg: Le réseau n'est pas accessible
ping: sendmsg: Le réseau n'est pas accessible

NOTA: Je viens d'utiliser une connexion de secours pour mettre à jour cette discussion.

Dernière modification par Bougron (Le 29/01/2018, à 15:59)

Hors ligne

#9 Le 29/01/2018, à 17:46

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Situation actuelle
Je suis de nouveau connecté en FreeWifi et j'ai

804:~$ nmcli dev wifi|grep FreeWi|grep -v secure
   FreeWifi         Infra  1     54 Mo/s  32      ▂▄__  --          
   FreeWifi         Infra  11    54 Mo/s  32      ▂▄__  --          
   FreeWifi         Infra  13    54 Mo/s  27      ▂___  --          
   FreeWifi         Infra  10    54 Mo/s  24      ▂___  --          
   FreeWifi         Infra  13    54 Mo/s  19      ▂___  --          
   FreeWifi         Infra  1     54 Mo/s  15      ▂___  --     

Je me rends compte qu'actuellement j'ai deux émetteurs possible sur le canal 1
Il est probable que le choix fait soit sur le canal 1 et qu'il y ait un mélange entre ces deux entités......

 iwconfig wlp8s0
wlp8s0    IEEE 802.11  ESSID:"iPad "  
          Mode:Managed  Frequency:2.412 GHz  Access Point: 62:FE:C5:C6:F3:B0   
          Bit Rate=6.5 Mb/s   Tx-Power=15 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=70/70  Signal level=-33 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:5  Invalid misc:89   Missed beacon:0

Ajout:  Cinq heures plus tard, la connexion est toujours opérationnelle.
On verra bien demain comment la négociation de démarrage va s'opérer.

Dernière modification par Bougron (Le 29/01/2018, à 22:13)

Hors ligne

#10 Le 29/01/2018, à 18:09

Nuliel

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Que ce soit en émulation WIFI ou ETHERNET les commandes ping 8.8.8.8 ou ping 212.27.40.239 fonctionnent parfaitement
Mais les commandes ping www.google.com ou ping wifi.free.fr   répondent "Nom ou service inconnu"

Mais as tu essayé ce que je proposais ici? (après j'ai parcouru rapidement les échanges, j'ai peut être loupé une réponse)
Il y a peut être besoin de redémarrer network manager avec

sudo service network-manager restart

Et c'est pas toujours la même adresse mac qui apparaît dans le retour de dmesg. Mais je sais pas pourquoi.

Dernière modification par Nuliel (Le 29/01/2018, à 18:10)

Hors ligne

#11 Le 30/01/2018, à 00:59

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

j'ai fais ce qui est indiqué ici https://forum.ubuntu-fr.org/viewtopic.p … #p21852510
Mais le fichier n'est pas totalement identique. Il ne contient que les trois premières lignes.
J'ai probablement bousillé un fichier de paramètrage dont je ne me souviens plus.

Dernière modification par Bougron (Le 30/01/2018, à 01:07)

Hors ligne

#12 Le 31/01/2018, à 12:44

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonjour.
Le problème reste entier.
Hier j'ai décidé de créer une nouvelle instance à partir du DAILY
Voici le contenu de son noyau

a@D1804:~$ dpkg -l | grep -Ei "linux-(g|h|i|si|t)"
ii  binutils-x86-64-linux-gnu                  2.29.1-12ubuntu1                         amd64        GNU binary utilities, for x86-64-linux-gnu target
ii  linux-generic                              4.13.0.25.26                             amd64        Complete Generic Linux kernel and headers
ii  linux-headers-4.13.0-25                    4.13.0-25.29                             all          Header files related to Linux kernel version 4.13.0
ii  linux-headers-4.13.0-25-generic            4.13.0-25.29                             amd64        Linux kernel headers for version 4.13.0 on 64 bit x86 SMP
ii  linux-headers-generic                      4.13.0.25.26                             amd64        Generic Linux kernel headers
ii  linux-image-4.13.0-25-generic              4.13.0-25.29                             amd64        Linux kernel image for version 4.13.0 on 64 bit x86 SMP
ii  linux-image-extra-4.13.0-25-generic        4.13.0-25.29                             amd64        Linux kernel extra modules for version 4.13.0 on 64 bit x86 SMP
ii  linux-image-generic                        4.13.0.25.26                             amd64        Generic Linux kernel image
ii  linux-signed-generic                       4.13.0.25.26                             amd64        Complete Signed Generic Linux kernel and headers
ii  linux-signed-image-4.13.0-25-generic       4.13.0-25.29                             amd64        Signed kernel image generic
ii  linux-signed-image-generic                 4.13.0.25.26                             amd64        Signed Generic Linux kernel image

La connexion par câble fonctionne. La connexion par wifi fonctionne.
Je ne maîtrise pas du tout la procédure pour me connecter en utilisant FREEWIFI, pourtant je sais le faire très facilement avec une version 16.04 32 bits et peut-être maintenant avec une version 16.04 64 bits (les deux dernières connexions ont fonctionné classiquement).

Pour ce noyau (Je suis quasiment certain que c'est pareil en version 17.10), j'ai  probablement deux problèmes:

A)  J'ouvre le réseau et je veux me connecter à  wifi.free.fr
    La connexion est refusée, Je fournirais l'écran exact;   Mais je  pense me souvenir que le message est "Hum, nous ne parvenons pas à trouver ce site."
   Je peux tenter plusieurs fois, toujours la même erreur.
   Je m'absente , et lorsque je reviens, l'écran d'accueil du site wifi.free.fr est présent!
===> La prochaine fois je chronométrerais pour avoir une idée du temps nécessaire à cette réception.
    Ma première question:     Cela est certainement un paramètre modifiable quelque part.
  Je remplis la grille. J'envoie et en réponse, j'ai "connexion acceptée".
B) Malgré cela, J'ai toujours un refus de connexion.
     J'ai capturé une grille qui montre que firefox a un site de proposition de connexion.
     J'ai cliqué dessus sans trop savoir si c'était une bonne idée.   Merci de votre avis.
     Voici la grille à ce niveau.

1517398566.png


C) Je voudrais repartir  totalement à zéro à chaque fois. Mais je  ne sais pas combien de temps WIFI.FREE.FR maintient la connexion ouverte ou s'il est possible de lancer une commande de libération de la connexion.    Dans le doute, je reste plusieurs heures  sans utiliser pour être certain que l'hébergeur a perdu la trace. Mais cela fait que je n'avance pas vite.....

D) Actuellement je communique par câble USB.

Hors ligne

#13 Le 01/02/2018, à 13:20

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonjour
Ce jour, je reprends le problème.
A) Boot à 11 Heures 48 et ecran de connexion à freewifi proposé automatiquement à 12 heures 12.
On dira donc  25 minutes plus tard!
Pendant ce temps la commande

sudo nmcli dev wifi | grep FreeWifi | grep -v secure

a pu montrer  à chaque fois  que je la faisais
infra 10   puissance 44
infra   4   puissance 40
infra   1   puissance 25
infra   2   puissance 24
infra 13   puissance 19
infra   1   puissance 15

J'ai donc rempli la grille d'accueil de free.wifi.fre. Je l'ai expédiée et ai reçu immédiatement un message disant "Error  resolving "wifi.free.fr": Name or service not know"
En cherchant un peu , je suis tombé sur cette commande

systemctl status systemd-resolved -l --no-pager

La réponse intéressante est une liste  de ce style:

systemd-resolved[845]: Using degraded feature set (UDP) for DNS server 212.27.40.241
systemd-resolved[845]: Using degraded feature set (TCP) for DNS server 212.27.40.241
systemd-resolved[845]: Using degraded feature set (UDP) for DNS server 212.27.40.240
systemd-resolved[845]: Using degraded feature set (TCP) for DNS server 212.27.40.240

Qui se répète entre 12 heures 12 et 12 heures 20.

et qui me semble être liée à une connexion automatique à un mauvais endroit 
( Vu à partir d'un scénario rejoué en  soirée. En effet, J'ai fini par rebooter à 18h06.  A 18 heures 22, j'ai eu une grille de connexion automatique qui n'était pas celle de free.wifi
Cette fois-ci, j'ai réagi assez vite et j'ai pu capturer
1517510912.png     
Dans la foulée, J'ai fait la même commande qui m'a indiqué le même style de réponse

Je ne sais pas trop ce qu'est un mode dégradé et pourquoi cela ne continue plus  de poster.

Actuellement un ping, sur ce dns serveur, répond " connect: Le réseau n'est pas accessible".
et
infra 10 Puissance 33

Réponse faite à  partir d'un micro en 32 bits.
Ajout fait à partir de ce même ordinateur  après avoir booté en version 16.04.3  https://forum.ubuntu-fr.org/viewtopic.p … #p21864535
Cela me semble quand même un problème dans lequel le logiciel n'est pas du tout clair.

Dernière modification par Bougron (Le 01/02/2018, à 20:02)

Hors ligne

#14 Le 12/02/2018, à 21:38

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonsoir.

Comme cela ne semble pas passionner ceux qui font la promotion de la version 18.04, je suspends cette discussion quelques semaines, le temps de l'arrivée de la version officielle.

Rappel du problème:   Avec cette version je n'ai pas trouvé comment me connecter en FREEWIFI alors que j'y arrive temps bien que mal en version 16.04

Dernière modification par Bougron (Le 12/02/2018, à 21:40)

Hors ligne

#15 Le 27/04/2018, à 19:49

Bougron

Re : [Résolu] BIONIC (18.04) Utilisation de FREEWIFI

Bonjour à tous

Je suis actuellement dans un lieu totalement différant  à proximité d'une seule freebox.
Il n'y a plus aucun problème de fonctionnement.

a@D1804:~$ sudo nmcli dev wifi | grep FreeWifi | grep -v secure
*       FreeWifi  Infra  10    270 Mo/s  77      ▂▄▆_  --       
a@D1804:~$ sudo iwconfig wlp8s0 txpower 17
a@D1804:~$ sudo      iwconfig 
enp9s0    no wireless extensions.

lo        no wireless extensions.

wlp8s0    IEEE 802.11  ESSID:"FreeWifi"  
          Mode:Managed  Frequency:2.457 GHz  Access Point: DA:0F:67:AF:23:12   
          Bit Rate=135 Mb/s   Tx-Power=16 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=66/70  Signal level=-44 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
a@D1804:~$ dpkg -l | grep linux-headers
ii  linux-headers-4.15.0-13                    4.15.0-13.14                        all          Header files related to Linux kernel version 4.15.0
ii  linux-headers-4.15.0-13-generic            4.15.0-13.14                        amd64        Linux kernel headers for version 4.15.0 on 64 bit x86 SMP
ii  linux-headers-4.15.0-20                    4.15.0-20.21                        all          Header files related to Linux kernel version 4.15.0
ii  linux-headers-4.15.0-20-generic            4.15.0-20.21                        amd64        Linux kernel headers for version 4.15.0 on 64 bit x86 SMP
ii  linux-headers-generic                      4.15.0.20.23                        amd64        Generic Linux kernel headers

Comme le choix du réseau wifi à choisir est restreint, il est probable que ce message soit maintenant sans grand intérêt.

a@D1804:/var/log$ cat syslog | grep renewal | wc
     67     871    5832
a@D1804:/var/log$ cat syslog | grep renewal | tail -20
Apr 27 20:25:31 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 55 seconds.
Apr 27 20:26:26 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 65 seconds.
Apr 27 20:27:39 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 56 seconds.
Apr 27 20:28:36 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 53 seconds.
Apr 27 20:29:30 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 65 seconds.
Apr 27 20:30:35 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 67 seconds.
Apr 27 20:31:44 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 61 seconds.
Apr 27 20:32:46 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 64 seconds.
Apr 27 20:33:52 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 55 seconds.
Apr 27 20:34:52 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 61 seconds.
Apr 27 20:35:55 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 55 seconds.
Apr 27 20:36:51 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 64 seconds.
Apr 27 20:38:00 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 55 seconds.
Apr 27 20:38:56 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 53 seconds.
Apr 27 20:39:51 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 53 seconds.
Apr 27 20:40:44 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 64 seconds.
Apr 27 20:41:49 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 62 seconds.
Apr 27 20:42:51 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 65 seconds.
Apr 27 20:44:01 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 63 seconds.
Apr 27 20:45:04 D1804 dhclient[1132]: bound to 10.41.128.109 -- renewal in 51 seconds.
a@D1804:/var/log$ 

Hors ligne