Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 05/10/2018, à 14:16

NicoNicoNico

Ubuntu crashe avec 2 écrans Precision 5520, ubuntu 16.04

Bonjour,

J'ai un dell precision 5520 sous ubuntu 16.04 sur lequel je branche un un ecran dell flat panel monitor U2718Q via un dock dell K170A.

Le tout crashe (écran gelé) au démarage (très souvent), juste après que j'ai entre login et mote de passe. ou sinon il gèle  quand je débranche et rebranche l'ecran secondaire.

-> Je ne trouve pas de fichier Xorg.conf

voici ma liste de matériel:

nicolas@nicolas-Precision-5520:~$ lshw
ATTENTION: ce programme devrait être lancé en tant que super-utilisateur.
nicolas-precision-5520    
    description: Computer
    bits: 64 bits
    fonctionnalités: vsyscall32
  *-core
       description: Motherboard
       identifiant matériel: 0
     *-memory
          description: Mémoire système
          identifiant matériel: 0
          taille: 15GiB
     *-cpu
          produit: Intel(R) Core(TM) i7-7820HQ CPU @ 2.90GHz
          fabriquant: Intel Corp.
          identifiant matériel: 1
          information bus: cpu@0
          taille: 2169MHz
          capacité: 3900MHz
          bits: 64 bits
          fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single intel_pt ssbd ibrs ibpb stibp kaiser tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp flush_l1d cpufreq
     *-pci
          description: Host bridge
          produit: Intel Corporation
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 05
          bits: 32 bits
          horloge: 33MHz
        *-pci:0
             description: PCI bridge
             produit: Sky Lake PCIe Controller (x16)
             fabriquant: Intel Corporation
             identifiant matériel: 1
             information bus: pci@0000:00:01.0
             version: 05
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:122 portE/S:e000(taille=4096) mémoire:ec000000-ed0fffff portE/S:c0000000(taille=301989888)
           *-generic NON-RÉCLAMÉ
                description: Unassigned class
                produit: Illegal Vendor ID
                fabriquant: Illegal Vendor ID
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                version: ff
                bits: 32 bits
                horloge: 66MHz
                fonctionnalités: bus_master vga_palette cap_list
                configuration: latency=255 maxlatency=255 mingnt=255
                ressources: mémoire:ec000000-ecffffff mémoire:c0000000-cfffffff mémoire:d0000000-d1ffffff portE/S:e000(taille=128) mémoire:ed000000-ed07ffff
        *-display
             description: VGA compatible controller
             produit: Intel Corporation
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 04
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: vga_controller bus_master cap_list rom
             configuration: driver=i915_bpo latency=0
             ressources: irq:136 mémoire:eb000000-ebffffff mémoire:80000000-8fffffff portE/S:f000(taille=64)
        *-generic:0
             description: Signal processing controller
             produit: Intel Corporation
             fabriquant: Intel Corporation
             identifiant matériel: 4
             information bus: pci@0000:00:04.0
             version: 05
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: cap_list
             configuration: driver=proc_thermal latency=0
             ressources: irq:16 mémoire:edd20000-edd27fff
        *-usb
             description: USB controller
             produit: Sunrise Point-H USB 3.0 xHCI Controller
             fabriquant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 31
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             ressources: irq:131 mémoire:edd10000-edd1ffff
        *-generic:1 NON-RÉCLAMÉ
             description: Signal processing controller
             produit: Sunrise Point-H Thermal subsystem
             fabriquant: Intel Corporation
             identifiant matériel: 14.2
             information bus: pci@0000:00:14.2
             version: 31
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: cap_list
             configuration: latency=0
             ressources: mémoire:edd38000-edd38fff
        *-generic:2
             description: Signal processing controller
             produit: Sunrise Point-H LPSS I2C Controller #0
             fabriquant: Intel Corporation
             identifiant matériel: 15
             information bus: pci@0000:00:15.0
             version: 31
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: bus_master cap_list
             configuration: driver=intel-lpss latency=0
             ressources: irq:16 mémoire:edd37000-edd37fff
        *-generic:3
             description: Signal processing controller
             produit: Sunrise Point-H LPSS I2C Controller #1
             fabriquant: Intel Corporation
             identifiant matériel: 15.1
             information bus: pci@0000:00:15.1
             version: 31
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: bus_master cap_list
             configuration: driver=intel-lpss latency=0
             ressources: irq:17 mémoire:edd36000-edd36fff
        *-communication
             description: Communication controller
             produit: Sunrise Point-H CSME HECI #1
             fabriquant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 31
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: bus_master cap_list
             configuration: driver=mei_me latency=0
             ressources: irq:144 mémoire:edd35000-edd35fff
        *-storage
             description: SATA controller
             produit: Sunrise Point-H SATA controller [AHCI mode]
             fabriquant: Intel Corporation
             identifiant matériel: 17
             information bus: pci@0000:00:17.0
             version: 31
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: storage ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             ressources: irq:134 mémoire:edd30000-edd31fff mémoire:edd34000-edd340ff portE/S:f090(taille=8) portE/S:f080(taille=4) portE/S:f060(taille=32) mémoire:edd33000-edd337ff
        *-pci:1
             description: PCI bridge
             produit: Sunrise Point-H PCI Express Root Port #1
             fabriquant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:123 mémoire:edc00000-edcfffff
           *-network
                description: Ethernet interface
                produit: Intel Corporation
                fabriquant: Intel Corporation
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                nom logique: wlp2s0
                version: 78
                numéro de série: 9c:da:3e:e4:75:14
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: bus_master cap_list ethernet physical
                configuration: broadcast=yes driver=iwlwifi driverversion=4.4.0-137-generic firmware=36.e91976c0.0 ip=172.17.30.221 latency=0 link=yes multicast=yes
                ressources: irq:143 mémoire:edc00000-edc01fff
        *-pci:2
             description: PCI bridge
             produit: Sunrise Point-H PCI Express Root Port #2
             fabriquant: Intel Corporation
             identifiant matériel: 1c.1
             information bus: pci@0000:00:1c.1
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:124 portE/S:d000(taille=4096) mémoire:ed100000-edafffff portE/S:d2100000(taille=10485760)
           *-generic
                description: Unassigned class
                produit: Realtek Semiconductor Co., Ltd.
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                version: 01
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: bus_master cap_list
                configuration: driver=rtsx_pci latency=0
                ressources: irq:133 mémoire:ed100000-ed100fff
        *-pci:3
             description: PCI bridge
             produit: Sunrise Point-H PCI Express Root Port #9
             fabriquant: Intel Corporation
             identifiant matériel: 1d
             information bus: pci@0000:00:1d.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:125 mémoire:edb00000-edbfffff
           *-storage
                description: Non-Volatile memory controller
                produit: Toshiba America Info Systems
                fabriquant: Toshiba America Info Systems
                identifiant matériel: 0
                information bus: pci@0000:04:00.0
                version: 01
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: storage nvm_express bus_master cap_list
                configuration: driver=nvme latency=0
                ressources: irq:16 mémoire:edb00000-edb03fff
        *-pci:4
             description: PCI bridge
             produit: Sunrise Point-H PCI Express Root Port #13
             fabriquant: Intel Corporation
             identifiant matériel: 1d.4
             information bus: pci@0000:00:1d.4
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16
        *-pci:5
             description: PCI bridge
             produit: Sunrise Point-H PCI Express Root Port #15
             fabriquant: Intel Corporation
             identifiant matériel: 1d.6
             information bus: pci@0000:00:1d.6
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:126 portE/S:2000(taille=8192) mémoire:d4000000-ea0fffff portE/S:90000000(taille=570425344)
           *-pci
                description: PCI bridge
                produit: Intel Corporation
                fabriquant: Intel Corporation
                identifiant matériel: 0
                information bus: pci@0000:06:00.0
                version: 00
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: pci normal_decode bus_master cap_list
                configuration: driver=pcieport
                ressources: irq:127 portE/S:2000(taille=8192) mémoire:d4000000-d44fffff portE/S:90000000(taille=4194304)
              *-pci:0
                   description: PCI bridge
                   produit: Intel Corporation
                   fabriquant: Intel Corporation
                   identifiant matériel: 0
                   information bus: pci@0000:07:00.0
                   version: 00
                   bits: 32 bits
                   horloge: 33MHz
                   fonctionnalités: pci normal_decode bus_master cap_list
                   configuration: driver=pcieport
                   ressources: irq:128
              *-pci:1
                   description: PCI bridge
                   produit: Intel Corporation
                   fabriquant: Intel Corporation
                   identifiant matériel: 1
                   information bus: pci@0000:07:01.0
                   version: 00
                   bits: 32 bits
                   horloge: 33MHz
                   fonctionnalités: pci normal_decode bus_master cap_list
                   configuration: driver=pcieport
                   ressources: irq:129 portE/S:2000(taille=4096) mémoire:d4000000-d41fffff portE/S:90000000(taille=2097152)
              *-pci:2
                   description: PCI bridge
                   produit: Intel Corporation
                   fabriquant: Intel Corporation
                   identifiant matériel: 2
                   information bus: pci@0000:07:02.0
                   version: 00
                   bits: 32 bits
                   horloge: 33MHz
                   fonctionnalités: pci normal_decode bus_master cap_list
                   configuration: driver=pcieport
                   ressources: irq:130 portE/S:3000(taille=4096) mémoire:d4200000-d44fffff portE/S:90200000(taille=2097152)
                 *-usb
                      description: USB controller
                      produit: Intel Corporation
                      fabriquant: Intel Corporation
                      identifiant matériel: 0
                      information bus: pci@0000:0a:00.0
                      version: 00
                      bits: 32 bits
                      horloge: 33MHz
                      fonctionnalités: xhci bus_master cap_list
                      configuration: driver=xhci_hcd latency=0
                      ressources: irq:132 mémoire:d4200000-d420ffff
        *-isa
             description: ISA bridge
             produit: Sunrise Point-H LPC Controller
             fabriquant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 31
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master
             configuration: latency=0
        *-memory NON-RÉCLAMÉ
             description: Memory controller
             produit: Sunrise Point-H PMC
             fabriquant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 31
             bits: 32 bits
             horloge: 33MHz (30.3ns)
             configuration: latency=0
             ressources: mémoire:edd2c000-edd2ffff
        *-multimedia
             description: Audio device
             produit: Intel Corporation
             fabriquant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 31
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             ressources: irq:145 mémoire:edd28000-edd2bfff mémoire:edd00000-edd0ffff
        *-serial NON-RÉCLAMÉ
             description: SMBus
             produit: Sunrise Point-H SMBus
             fabriquant: Intel Corporation
             identifiant matériel: 1f.4
             information bus: pci@0000:00:1f.4
             version: 31
             bits: 64 bits
             horloge: 33MHz
             configuration: latency=0
             ressources: mémoire:edd32000-edd320ff portE/S:f040(taille=32)
  *-scsi
       identifiant matériel: 1
       information bus: scsi@2
       nom logique: scsi2
       fonctionnalités: scsi-host
       configuration: driver=usb-storage
  *-network
       description: Ethernet interface
       identifiant matériel: 2
       nom logique: enxa44cc8f10cf6
       numéro de série: a4:4c:c8:f1:0c:f6
       taille: 1Gbit/s
       capacité: 1Gbit/s
       fonctionnalités: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8152 driverversion=v1.08.3 duplex=full ip=172.16.206.63 link=yes multicast=yes port=MII speed=1Gbit/s
ATTENTION: les informations sont potentiellement incomplètes ou erronées, vous devriez lancer ce programme en tant que super-utilisateur.

Voici mon fichier Xorg.0.log

[    21.179] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    21.179] X Protocol Version 11, Revision 0
[    21.179] Build Operating System: Linux 4.4.0-128-generic x86_64 Ubuntu
[    21.179] Current Operating System: Linux nicolas-Precision-5520 4.4.0-137-generic #163-Ubuntu SMP Mon Sep 24 13:14:43 UTC 2018 x86_64
[    21.179] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-137-generic.efi.signed root=UUID=4eec18b2-44b2-4ce6-823c-8f8b8e252bc3 ro acpi_rev_override quiet splash vt.handoff=7
[    21.179] Build Date: 10 August 2018  09:33:05AM
[    21.179] xorg-server 2:1.18.4-0ubuntu0.8 (For technical support please see http://www.ubuntu.com/support) 
[    21.179] Current version of pixman: 0.33.6
[    21.179] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    21.179] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.179] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct  5 13:56:20 2018
[    21.180] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.181] (==) No Layout section.  Using the first Screen section.
[    21.181] (==) No screen section available. Using defaults.
[    21.181] (**) |-->Screen "Default Screen Section" (0)
[    21.181] (**) |   |-->Monitor "<default monitor>"
[    21.181] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    21.182] (==) Automatically adding devices
[    21.182] (==) Automatically enabling devices
[    21.182] (==) Automatically adding GPU devices
[    21.182] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    21.183] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    21.183] 	Entry deleted from font path.
[    21.183] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    21.183] 	Entry deleted from font path.
[    21.183] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    21.183] 	Entry deleted from font path.
[    21.183] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    21.183] 	Entry deleted from font path.
[    21.183] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    21.183] 	Entry deleted from font path.
[    21.183] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    21.183] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    21.183] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.183] (II) Loader magic: 0x55def072edc0
[    21.183] (II) Module ABI versions:
[    21.183] 	X.Org ANSI C Emulation: 0.4
[    21.183] 	X.Org Video Driver: 20.0
[    21.183] 	X.Org XInput driver : 22.1
[    21.183] 	X.Org Server Extension : 9.0
[    21.183] (++) using VT number 7

[    21.183] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    21.184] (II) xfree86: Adding drm device (/dev/dri/card1)
[    21.289] (--) PCI:*(0:0:2:0) 8086:591b:1028:07bf rev 4, Mem @ 0xeb000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64
[    21.289] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    21.289] (II) "glx" will be loaded by default.
[    21.289] (II) LoadModule: "glx"
[    21.290] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    21.294] (II) Module glx: vendor="X.Org Foundation"
[    21.294] 	compiled for 1.18.4, module version = 1.0.0
[    21.294] 	ABI class: X.Org Server Extension, version 9.0
[    21.294] (==) AIGLX enabled
[    21.295] (==) Matched intel as autoconfigured driver 0
[    21.295] (==) Matched intel as autoconfigured driver 1
[    21.295] (==) Matched modesetting as autoconfigured driver 2
[    21.295] (==) Matched fbdev as autoconfigured driver 3
[    21.295] (==) Matched vesa as autoconfigured driver 4
[    21.295] (==) Assigned the driver to the xf86ConfigLayout
[    21.295] (II) LoadModule: "intel"
[    21.295] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    21.296] (II) Module intel: vendor="X.Org Foundation"
[    21.296] 	compiled for 1.18.4, module version = 2.99.917
[    21.296] 	Module class: X.Org Video Driver
[    21.296] 	ABI class: X.Org Video Driver, version 20.0
[    21.296] (II) LoadModule: "modesetting"
[    21.296] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.296] (II) Module modesetting: vendor="X.Org Foundation"
[    21.296] 	compiled for 1.18.4, module version = 1.18.4
[    21.296] 	Module class: X.Org Video Driver
[    21.296] 	ABI class: X.Org Video Driver, version 20.0
[    21.296] (II) LoadModule: "fbdev"
[    21.296] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.297] (II) Module fbdev: vendor="X.Org Foundation"
[    21.297] 	compiled for 1.18.1, module version = 0.4.4
[    21.297] 	Module class: X.Org Video Driver
[    21.297] 	ABI class: X.Org Video Driver, version 20.0
[    21.297] (II) LoadModule: "vesa"
[    21.297] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.297] (II) Module vesa: vendor="X.Org Foundation"
[    21.297] 	compiled for 1.18.1, module version = 2.3.4
[    21.297] 	Module class: X.Org Video Driver
[    21.297] 	ABI class: X.Org Video Driver, version 20.0
[    21.297] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    21.297] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    21.297] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    21.297] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    21.297] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.297] (II) FBDEV: driver for framebuffer: fbdev
[    21.297] (II) VESA: driver for VESA chipsets: vesa
[    21.298] (II) intel(0): Using Kernel Mode Setting driver: i915_bpo, version 1.6.0 20160425
[    21.298] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[    21.298] (II) intel(0): SNA compiled for use with valgrind
[    21.298] (WW) Falling back to old probe method for modesetting
[    21.298] (EE) open /dev/dri/card0: No such file or directory
[    21.298] (WW) Falling back to old probe method for fbdev
[    21.298] (II) Loading sub module "fbdevhw"
[    21.298] (II) LoadModule: "fbdevhw"
[    21.298] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.298] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.298] 	compiled for 1.18.4, module version = 0.0.2
[    21.298] 	ABI class: X.Org Video Driver, version 20.0
[    21.298] (WW) Falling back to old probe method for vesa
[    21.299] (--) intel(0): gen9 engineering sample
[    21.299] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[    21.299] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    21.299] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    21.299] (==) intel(0): RGB weight 888
[    21.299] (==) intel(0): Default visual is TrueColor
[    21.299] (II) intel(0): Output eDP1 has no monitor section
[    21.316] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    21.316] (II) intel(0): Enabled output eDP1
[    21.316] (II) intel(0): Output DP1 has no monitor section
[    21.316] (II) intel(0): Enabled output DP1
[    21.316] (II) intel(0): Output HDMI1 has no monitor section
[    21.316] (II) intel(0): Enabled output HDMI1
[    21.316] (II) intel(0): Output DP2 has no monitor section
[    21.316] (II) intel(0): Enabled output DP2
[    21.316] (II) intel(0): Output HDMI2 has no monitor section
[    21.316] (II) intel(0): Enabled output HDMI2
[    21.316] (II) intel(0): Output DP1-1 has no monitor section
[    21.316] (II) intel(0): Enabled output DP1-1
[    21.316] (II) intel(0): Output DP1-2 has no monitor section
[    21.316] (II) intel(0): Enabled output DP1-2
[    21.316] (II) intel(0): Output DP1-3 has no monitor section
[    21.316] (II) intel(0): Enabled output DP1-3
[    21.316] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    21.316] (II) intel(0): Output VIRTUAL1 has no monitor section
[    21.316] (II) intel(0): Enabled output VIRTUAL1
[    21.316] (--) intel(0): Output eDP1 using initial mode 3840x2160 on pipe 0
[    21.316] (--) intel(0): Output DP1-2 using initial mode 3840x2160 on pipe 1
[    21.316] (==) intel(0): TearFree disabled
[    21.316] (==) intel(0): DPI set to (96, 96)
[    21.316] (II) Loading sub module "dri2"
[    21.316] (II) LoadModule: "dri2"
[    21.316] (II) Module "dri2" already built-in
[    21.316] (II) Loading sub module "present"
[    21.316] (II) LoadModule: "present"
[    21.316] (II) Module "present" already built-in
[    21.317] (II) UnloadModule: "modesetting"
[    21.317] (II) Unloading modesetting
[    21.317] (II) UnloadModule: "fbdev"
[    21.317] (II) Unloading fbdev
[    21.317] (II) UnloadSubModule: "fbdevhw"
[    21.317] (II) Unloading fbdevhw
[    21.317] (II) UnloadModule: "vesa"
[    21.317] (II) Unloading vesa
[    21.317] (==) Depth 24 pixmap format is 32 bpp
[    21.318] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[    21.318] (==) intel(0): Backing store enabled
[    21.318] (==) intel(0): Silken mouse enabled
[    21.318] (II) intel(0): HW Cursor enabled
[    21.318] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    21.319] (==) intel(0): DPMS enabled
[    21.319] (==) intel(0): Display hotplug detection enabled
[    21.319] (II) intel(0): [DRI2] Setup complete
[    21.319] (II) intel(0): [DRI2]   DRI driver: i965
[    21.319] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    21.319] (II) intel(0): direct rendering: DRI2 enabled
[    21.319] (II) intel(0): hardware support for Present enabled
[    21.319] (--) RandR disabled
[    21.321] (II) SELinux: Disabled on system
[    21.332] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    21.332] (II) AIGLX: enabled GLX_ARB_create_context
[    21.332] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    21.332] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    21.332] (II) AIGLX: enabled GLX_INTEL_swap_event
[    21.332] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    21.332] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    21.332] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    21.332] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    21.332] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    21.332] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    21.332] (II) AIGLX: Loaded and initialized i965
[    21.332] (II) GLX: Initialized DRI2 GL provider for screen 0
[    21.338] (II) intel(0): switch to mode 3840x2160@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    21.338] (II) intel(0): switch to mode 3840x2160@30.0 on DP1-2 using pipe 1, position (0, 0), rotation normal, reflection none
[    21.338] (II) intel(0): Setting screen physical size to 1016 x 571
[    21.363] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    21.363] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.363] (II) LoadModule: "evdev"
[    21.363] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.365] (II) Module evdev: vendor="X.Org Foundation"
[    21.365] 	compiled for 1.18.1, module version = 2.10.1
[    21.365] 	Module class: X.Org XInput Driver
[    21.365] 	ABI class: X.Org XInput driver, version 22.1
[    21.365] (II) Using input driver 'evdev' for 'Power Button'
[    21.365] (**) Power Button: always reports core events
[    21.365] (**) evdev: Power Button: Device: "/dev/input/event3"
[    21.365] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.365] (--) evdev: Power Button: Found keys
[    21.365] (II) evdev: Power Button: Configuring as keyboard
[    21.365] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    21.365] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.365] (**) Option "xkb_rules" "evdev"
[    21.365] (**) Option "xkb_model" "a4techKB21"
[    21.365] (**) Option "xkb_layout" "us,af"
[    21.365] (**) Option "xkb_variant" ","
[    21.365] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.375] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    21.375] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    21.375] (II) Using input driver 'evdev' for 'Video Bus'
[    21.375] (**) Video Bus: always reports core events
[    21.375] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    21.375] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    21.375] (--) evdev: Video Bus: Found keys
[    21.375] (II) evdev: Video Bus: Configuring as keyboard
[    21.375] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5"
[    21.375] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    21.375] (**) Option "xkb_rules" "evdev"
[    21.376] (**) Option "xkb_model" "a4techKB21"
[    21.376] (**) Option "xkb_layout" "us,af"
[    21.376] (**) Option "xkb_variant" ","
[    21.376] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.376] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    21.376] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    21.376] (II) Using input driver 'evdev' for 'Video Bus'
[    21.376] (**) Video Bus: always reports core events
[    21.376] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    21.376] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    21.376] (--) evdev: Video Bus: Found keys
[    21.376] (II) evdev: Video Bus: Configuring as keyboard
[    21.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input8/event6"
[    21.376] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    21.376] (**) Option "xkb_rules" "evdev"
[    21.376] (**) Option "xkb_model" "a4techKB21"
[    21.376] (**) Option "xkb_layout" "us,af"
[    21.376] (**) Option "xkb_variant" ","
[    21.376] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.376] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    21.376] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.376] (II) Using input driver 'evdev' for 'Power Button'
[    21.376] (**) Power Button: always reports core events
[    21.376] (**) evdev: Power Button: Device: "/dev/input/event1"
[    21.376] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.376] (--) evdev: Power Button: Found keys
[    21.376] (II) evdev: Power Button: Configuring as keyboard
[    21.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    21.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    21.376] (**) Option "xkb_rules" "evdev"
[    21.376] (**) Option "xkb_model" "a4techKB21"
[    21.376] (**) Option "xkb_layout" "us,af"
[    21.376] (**) Option "xkb_variant" ","
[    21.376] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.377] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    21.377] (II) No input driver specified, ignoring this device.
[    21.377] (II) This device may have been added with another device file.
[    21.377] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    21.377] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    21.377] (II) Using input driver 'evdev' for 'Sleep Button'
[    21.377] (**) Sleep Button: always reports core events
[    21.377] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    21.377] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    21.377] (--) evdev: Sleep Button: Found keys
[    21.377] (II) evdev: Sleep Button: Configuring as keyboard
[    21.377] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    21.377] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    21.377] (**) Option "xkb_rules" "evdev"
[    21.377] (**) Option "xkb_model" "a4techKB21"
[    21.377] (**) Option "xkb_layout" "us,af"
[    21.377] (**) Option "xkb_variant" ","
[    21.377] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.378] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event20)
[    21.378] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    21.378] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[    21.378] (**) Integrated_Webcam_HD: always reports core events
[    21.378] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event20"
[    21.378] (--) evdev: Integrated_Webcam_HD: Vendor 0xc45 Product 0x6713
[    21.378] (--) evdev: Integrated_Webcam_HD: Found keys
[    21.378] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[    21.378] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input23/event20"
[    21.378] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[    21.378] (**) Option "xkb_rules" "evdev"
[    21.378] (**) Option "xkb_model" "a4techKB21"
[    21.378] (**) Option "xkb_layout" "us,af"
[    21.378] (**) Option "xkb_variant" ","
[    21.378] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.378] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event18)
[    21.378] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[    21.378] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[    21.378] (**) ELAN Touchscreen: always reports core events
[    21.378] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event18"
[    21.378] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x24a0
[    21.378] (--) evdev: ELAN Touchscreen: Found absolute axes
[    21.378] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[    21.378] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[    21.378] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[    21.378] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[    21.378] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[    21.378] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[    21.378] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.378] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:04F3:24A0.0004/input/input19/event18"
[    21.378] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 12)
[    21.378] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[    21.378] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[    21.378] (**) ELAN Touchscreen: (accel) acceleration profile 0
[    21.378] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[    21.378] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[    21.379] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse2)
[    21.379] (II) No input driver specified, ignoring this device.
[    21.379] (II) This device may have been added with another device file.
[    21.379] (II) config/udev: Adding input device DLL07BF:01 06CB:7A13 Touchpad (/dev/input/event19)
[    21.379] (**) DLL07BF:01 06CB:7A13 Touchpad: Applying InputClass "evdev touchpad catchall"
[    21.379] (**) DLL07BF:01 06CB:7A13 Touchpad: Applying InputClass "evdev touchscreen catchall"
[    21.379] (**) DLL07BF:01 06CB:7A13 Touchpad: Applying InputClass "touchpad catchall"
[    21.379] (**) DLL07BF:01 06CB:7A13 Touchpad: Applying InputClass "Default clickpad buttons"
[    21.379] (II) LoadModule: "synaptics"
[    21.379] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    21.379] (II) Module synaptics: vendor="X.Org Foundation"
[    21.379] 	compiled for 1.18.1, module version = 1.8.2
[    21.379] 	Module class: X.Org XInput Driver
[    21.379] 	ABI class: X.Org XInput driver, version 22.1
[    21.379] (II) Using input driver 'synaptics' for 'DLL07BF:01 06CB:7A13 Touchpad'
[    21.379] (**) DLL07BF:01 06CB:7A13 Touchpad: always reports core events
[    21.379] (**) Option "Device" "/dev/input/event19"
[    21.440] (II) synaptics: DLL07BF:01 06CB:7A13 Touchpad: found clickpad property
[    21.440] (--) synaptics: DLL07BF:01 06CB:7A13 Touchpad: x-axis range 0 - 1228 (res 12)
[    21.440] (--) synaptics: DLL07BF:01 06CB:7A13 Touchpad: y-axis range 0 - 928 (res 12)
[    21.440] (II) synaptics: DLL07BF:01 06CB:7A13 Touchpad: device does not report pressure, will use touch data.
[    21.440] (II) synaptics: DLL07BF:01 06CB:7A13 Touchpad: device does not report finger width.
[    21.440] (--) synaptics: DLL07BF:01 06CB:7A13 Touchpad: buttons: left double triple
[    21.440] (--) synaptics: DLL07BF:01 06CB:7A13 Touchpad: Vendor 0x6cb Product 0x7a13
[    21.440] (--) synaptics: DLL07BF:01 06CB:7A13 Touchpad: invalid pressure range.  defaulting to 0 - 255
[    21.440] (--) synaptics: DLL07BF:01 06CB:7A13 Touchpad: invalid finger width range.  defaulting to 0 - 15
[    21.440] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    21.440] (--) synaptics: DLL07BF:01 06CB:7A13 Touchpad: touchpad found
[    21.440] (**) DLL07BF:01 06CB:7A13 Touchpad: always reports core events
[    21.472] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL07BF:01/0018:06CB:7A13.0006/input/input21/event19"
[    21.472] (II) XINPUT: Adding extended input device "DLL07BF:01 06CB:7A13 Touchpad" (type: TOUCHPAD, id 13)
[    21.472] (**) synaptics: DLL07BF:01 06CB:7A13 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    21.472] (**) synaptics: DLL07BF:01 06CB:7A13 Touchpad: (accel) MaxSpeed is now 1.75
[    21.472] (**) synaptics: DLL07BF:01 06CB:7A13 Touchpad: (accel) AccelFactor is now 0.130
[    21.472] (**) DLL07BF:01 06CB:7A13 Touchpad: (accel) keeping acceleration scheme 1
[    21.472] (**) DLL07BF:01 06CB:7A13 Touchpad: (accel) acceleration profile 1
[    21.472] (**) DLL07BF:01 06CB:7A13 Touchpad: (accel) acceleration factor: 2.000
[    21.472] (**) DLL07BF:01 06CB:7A13 Touchpad: (accel) acceleration threshold: 4
[    21.472] (--) synaptics: DLL07BF:01 06CB:7A13 Touchpad: touchpad found
[    21.473] (II) config/udev: Adding input device DLL07BF:01 06CB:7A13 Touchpad (/dev/input/mouse3)
[    21.473] (**) DLL07BF:01 06CB:7A13 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    21.473] (II) config/udev: Adding input device Dell Dell Universal Receiver (/dev/input/event7)
[    21.473] (**) Dell Dell Universal Receiver: Applying InputClass "evdev keyboard catchall"
[    21.473] (II) Using input driver 'evdev' for 'Dell Dell Universal Receiver'
[    21.473] (**) Dell Dell Universal Receiver: always reports core events
[    21.473] (**) evdev: Dell Dell Universal Receiver: Device: "/dev/input/event7"
[    21.473] (--) evdev: Dell Dell Universal Receiver: Vendor 0x413c Product 0x8505
[    21.473] (--) evdev: Dell Dell Universal Receiver: Found keys
[    21.473] (II) evdev: Dell Dell Universal Receiver: Configuring as keyboard
[    21.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.6/0000:06:00.0/0000:07:02.0/0000:0a:00.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:413C:8505.0001/input/input9/event7"
[    21.473] (II) XINPUT: Adding extended input device "Dell Dell Universal Receiver" (type: KEYBOARD, id 14)
[    21.473] (**) Option "xkb_rules" "evdev"
[    21.473] (**) Option "xkb_model" "a4techKB21"
[    21.473] (**) Option "xkb_layout" "us,af"
[    21.473] (**) Option "xkb_variant" ","
[    21.473] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.474] (II) config/udev: Adding input device Dell Dell Universal Receiver (/dev/input/event8)
[    21.474] (**) Dell Dell Universal Receiver: Applying InputClass "evdev pointer catchall"
[    21.474] (**) Dell Dell Universal Receiver: Applying InputClass "evdev keyboard catchall"
[    21.474] (II) Using input driver 'evdev' for 'Dell Dell Universal Receiver'
[    21.474] (**) Dell Dell Universal Receiver: always reports core events
[    21.474] (**) evdev: Dell Dell Universal Receiver: Device: "/dev/input/event8"
[    21.474] (**) evdev: Dell Dell Universal Receiver: ButtonMapping '1 2 3 5 4 6 7 8'
[    21.474] (--) evdev: Dell Dell Universal Receiver: Vendor 0x413c Product 0x8505
[    21.474] (--) evdev: Dell Dell Universal Receiver: Found 9 mouse buttons
[    21.474] (--) evdev: Dell Dell Universal Receiver: Found scroll wheel(s)
[    21.474] (--) evdev: Dell Dell Universal Receiver: Found relative axes
[    21.474] (--) evdev: Dell Dell Universal Receiver: Found x and y relative axes
[    21.474] (--) evdev: Dell Dell Universal Receiver: Found absolute axes
[    21.474] (II) evdev: Dell Dell Universal Receiver: Forcing absolute x/y axes to exist.
[    21.474] (--) evdev: Dell Dell Universal Receiver: Found keys
[    21.474] (II) evdev: Dell Dell Universal Receiver: Configuring as mouse
[    21.474] (II) evdev: Dell Dell Universal Receiver: Configuring as keyboard
[    21.474] (II) evdev: Dell Dell Universal Receiver: Adding scrollwheel support
[    21.474] (**) evdev: Dell Dell Universal Receiver: YAxisMapping: buttons 4 and 5
[    21.474] (**) evdev: Dell Dell Universal Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.474] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.6/0000:06:00.0/0000:07:02.0/0000:0a:00.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:413C:8505.0002/input/input10/event8"
[    21.474] (II) XINPUT: Adding extended input device "Dell Dell Universal Receiver" (type: KEYBOARD, id 15)
[    21.474] (**) Option "xkb_rules" "evdev"
[    21.474] (**) Option "xkb_model" "a4techKB21"
[    21.474] (**) Option "xkb_layout" "us,af"
[    21.474] (**) Option "xkb_variant" ","
[    21.474] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.474] (II) evdev: Dell Dell Universal Receiver: initialized for relative axes.
[    21.474] (WW) evdev: Dell Dell Universal Receiver: ignoring absolute axes.
[    21.474] (**) Dell Dell Universal Receiver: (accel) keeping acceleration scheme 1
[    21.474] (**) Dell Dell Universal Receiver: (accel) acceleration profile 0
[    21.474] (**) Dell Dell Universal Receiver: (accel) acceleration factor: 2.000
[    21.474] (**) Dell Dell Universal Receiver: (accel) acceleration threshold: 4
[    21.474] (II) config/udev: Adding input device Dell Dell Universal Receiver (/dev/input/mouse0)
[    21.474] (II) No input driver specified, ignoring this device.
[    21.474] (II) This device may have been added with another device file.
[    21.475] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event12)
[    21.475] (II) No input driver specified, ignoring this device.
[    21.475] (II) This device may have been added with another device file.
[    21.475] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    21.475] (II) No input driver specified, ignoring this device.
[    21.475] (II) This device may have been added with another device file.
[    21.475] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[    21.475] (II) No input driver specified, ignoring this device.
[    21.475] (II) This device may have been added with another device file.
[    21.475] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[    21.475] (II) No input driver specified, ignoring this device.
[    21.475] (II) This device may have been added with another device file.
[    21.475] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event16)
[    21.475] (II) No input driver specified, ignoring this device.
[    21.475] (II) This device may have been added with another device file.
[    21.475] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event17)
[    21.475] (II) No input driver specified, ignoring this device.
[    21.475] (II) This device may have been added with another device file.
[    21.476] (II) config/udev: Adding input device Intel HID events (/dev/input/event10)
[    21.476] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[    21.476] (II) Using input driver 'evdev' for 'Intel HID events'
[    21.476] (**) Intel HID events: always reports core events
[    21.476] (**) evdev: Intel HID events: Device: "/dev/input/event10"
[    21.476] (--) evdev: Intel HID events: Vendor 0 Product 0
[    21.476] (--) evdev: Intel HID events: Found keys
[    21.476] (II) evdev: Intel HID events: Configuring as keyboard
[    21.476] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input11/event10"
[    21.476] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 16)
[    21.476] (**) Option "xkb_rules" "evdev"
[    21.476] (**) Option "xkb_model" "a4techKB21"
[    21.476] (**) Option "xkb_layout" "us,af"
[    21.476] (**) Option "xkb_variant" ","
[    21.476] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.476] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    21.476] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    21.476] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    21.476] (**) AT Translated Set 2 keyboard: always reports core events
[    21.476] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    21.476] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    21.476] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    21.476] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    21.476] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    21.476] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[    21.476] (**) Option "xkb_rules" "evdev"
[    21.476] (**) Option "xkb_model" "a4techKB21"
[    21.476] (**) Option "xkb_layout" "us,af"
[    21.476] (**) Option "xkb_variant" ","
[    21.476] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.476] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[    21.476] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    21.476] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[    21.476] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    21.476] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    21.476] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    21.476] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    21.476] (**) Option "Device" "/dev/input/event9"
[    21.540] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[    21.540] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1278 - 5664 (res 0)
[    21.540] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1206 - 4646 (res 0)
[    21.540] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    21.540] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    21.540] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[    21.540] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    21.540] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    21.540] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    21.540] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    21.564] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event9"
[    21.564] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 18)
[    21.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    21.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    21.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[    21.564] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    21.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    21.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    21.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    21.564] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    21.564] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    21.564] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    21.565] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event11)
[    21.565] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    21.565] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    21.565] (**) Dell WMI hotkeys: always reports core events
[    21.565] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event11"
[    21.565] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    21.565] (--) evdev: Dell WMI hotkeys: Found keys
[    21.565] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    21.565] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event11"
[    21.565] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 19)
[    21.565] (**) Option "xkb_rules" "evdev"
[    21.565] (**) Option "xkb_model" "a4techKB21"
[    21.565] (**) Option "xkb_layout" "us,af"
[    21.565] (**) Option "xkb_variant" ","
[    21.565] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    21.595] (WW) config/udev: device Integrated_Webcam_HD already added. Ignoring.
[    22.022] (II) intel(0): EDID vendor "SHP", prod id 5238
[    22.022] (II) intel(0): Printing DDC gathered Modelines:
[    22.022] (II) intel(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 -hsync -vsync (133.3 kHz eP)
[    22.452] (II) intel(0): resizing framebuffer to 7680x2160
[    22.495] (II) intel(0): switch to mode 3840x2160@30.0 on DP1-2 using pipe 1, position (3840, 0), rotation normal, reflection none
[    30.479] (II) intel(0): switch to mode 3840x2160@60.0 on eDP1 using pipe 0, position (3840, 0), rotation normal, reflection none
[    30.488] (II) intel(0): switch to mode 3840x2160@30.0 on DP1-2 using pipe 1, position (0, 0), rotation normal, reflection none

Quelqu'un sait il comment résoudre ce pb?

Merci par avance pour votre aide
Nicolas

Hors ligne