#1 Le 10/01/2019, à 00:20
- Geronimo12
questions avant installation avec ssd
Bonjour à tous,
je reviens sous ubuntu, y étant partis pour expérimenter linux mint, je souhaite revenir dessus...
j'ai un ordi portable avec un ssd de 120 go, comment me suggérez vous de faire l'installation ? dois-je tout mettre dessus ? le laisser faire ? j'ai vu qu'il y avait une installation minima pour la 18.04, est-ce bien ?
merci d'avance
Dernière modification par Geronimo12 (Le 10/01/2019, à 00:21)
MSI GP60 leopard, Ubuntu 22.04.3 LTS Gnome 42.9 processeur Intel Core i5-4210H CPU @2.90Ghz x 4, mémoire vive 7,7 Go, carte graphique intel corporation 4th Gen Core processor integrated graphics controller, Nvidia GTX950M, avec ssd msata 120 Go
Hors ligne
#2 Le 10/01/2019, à 00:48
- bluc
Re : questions avant installation avec ssd
Bonjour,
Je pense sans Windows
Je te conseille de créer une partition de 25 a 30 Go pour le système et le reste du disque pour /home , pas besoin de créer une partition swap puisse qu'un fichier swapping la remplace désormais
soit tu créer tes partition avant l'install avec gparted ou tu les créer pendant l'installation
(Si tu laisses l'installation se faire automatiquement sur tout le disque il n'y aura qu'une seule partition , le système de deux partitions avec /home est plus pratique quand on réinstalle , les données restent sur la partition ,donc on réinstalle dans ce cas que le système / )
Dernière modification par bluc (Le 10/01/2019, à 00:54)
Clevo : Ubuntu 23.10 ❖ Xubuntu 22.10 ❖ Kubuntu 23.10
avec partition data commune Une fraction de seconde Multiboot
Hors ligne
#3 Le 10/01/2019, à 10:10
- malbo
Re : questions avant installation avec ssd
Bonjour,
Moi je proposerais plutôt de sélectionner "Effacer le disque et installer Ubuntu" pour laisser faire l'installateur de Ubuntu. Il va créer automatiquement une partition EFI(*) et une partition racine (l'installateur de la version 18.04 ne crée pas de partition swap mais un fichier swap sur le partition racine). Ne prends pas l'installation minimale, prends l’installation normale. Cela dit, la proposition de bluc est respectable.
(*) en supposant que ton mode de démarrage est UEFI. Sinon, il ne créera pas de partition EFI (il y aura une seule partition sur le SSD, la partition racine)
Dernière modification par malbo (Le 10/01/2019, à 10:17)
Hors ligne
#4 Le 10/01/2019, à 10:40
- ubuntu18a
Re : questions avant installation avec ssd
Geronimo12 a écrit :
Bonjour à tous,
je reviens sous ubuntu...j'ai vu qu'il y avait une installation minima pour la 18.04, est-ce bien ?
merci d'avance
Bonjour.
Ne choisis pas la solution minima, car tu n'auras aucun logiciel d'installé!
sauf à lancer par la suite un script qui installe ce dont tu as besoin.
Il me semble que la solution de laisser faire le plus automatiquenent est préférable. Tu n'as pas besoin de partition de données si tu utiliises un seul logiciel
Dernière modification par ubuntu18a (Le 10/01/2019, à 10:40)
Hors ligne
#5 Le 10/01/2019, à 10:48
- bluc
Re : questions avant installation avec ssd
la partition// /home ou /data a quand meme un avantage en cas de réinstallation , (on est pas a l'abri d'une erreur ou d'un mauvais choix de bureau , Geronimo12 vient de Linux-Mint et souvent ceux-ci n'aiment pas Gnome )
Clevo : Ubuntu 23.10 ❖ Xubuntu 22.10 ❖ Kubuntu 23.10
avec partition data commune Une fraction de seconde Multiboot
Hors ligne
#6 Le 10/01/2019, à 16:23
- nam1962
Re : questions avant installation avec ssd
+1 pour le /home séparé, le seul souci ici étant la taille du SSD.
Un / de 50Go est plus sage de nos jours, car /swapfile vient déjà le réduire et les app containeurisées (snap/flatpak) prennent vite de la place !
Mais du coup, il ne resterait pas grand chose pour le /home.
[ Modéré ]
Hors ligne
#7 Le 15/01/2019, à 17:39
- Geronimo12
Re : questions avant installation avec ssd
merci à tous de vos réponses, mais je ne comprend pas bien ce que je dois choisir
MSI GP60 leopard, Ubuntu 22.04.3 LTS Gnome 42.9 processeur Intel Core i5-4210H CPU @2.90Ghz x 4, mémoire vive 7,7 Go, carte graphique intel corporation 4th Gen Core processor integrated graphics controller, Nvidia GTX950M, avec ssd msata 120 Go
Hors ligne
#8 Le 15/01/2019, à 17:45
- Compte supprimé
Re : questions avant installation avec ssd
Il vaut mieux faire ce que tu trouves le plus simple et que tu comprends.
Dans le doute creuse encore le sujet.
Tu veux changer de distribution parce que tu ne peux plus faire de copier-coller sur facebook ?
https://forum.ubuntu-fr.org/viewtopic.p … #p22036449
Dernière modification par Compte supprimé (Le 15/01/2019, à 17:47)
#9 Le 15/01/2019, à 17:49
- malbo
Re : questions avant installation avec ssd
Puisque tu ne sais pas choisir, je renouvelle ma proposition du post #3. C'est celle qui demande le moins d'effort.
Hors ligne
#10 Le 16/01/2019, à 00:45
- Geronimo12
Re : questions avant installation avec ssd
merci Malbo,
c'est vers ce choix là que je me tournais, j'ai juste une question, j'ai installé ce ssd pour que mon ordi aille plus vite et c'est vraiment top !!! je me demandais donc s'il choisira l'option du ssd pour faire tourner la machine tout seul ? suis-je clair ?
MSI GP60 leopard, Ubuntu 22.04.3 LTS Gnome 42.9 processeur Intel Core i5-4210H CPU @2.90Ghz x 4, mémoire vive 7,7 Go, carte graphique intel corporation 4th Gen Core processor integrated graphics controller, Nvidia GTX950M, avec ssd msata 120 Go
Hors ligne
#11 Le 16/01/2019, à 07:48
- malbo
Re : questions avant installation avec ssd
Bonjour,
Pour répondre à ta question, je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse. Si tu peux faire ce Boot-Info depuis une session de ton Linux Mint actuellement installé, c'est correct. Sinon, je te prie de faire ce Boot-Info depuis une session Live de Ubuntu 18.04.1 64 bits.
Hors ligne
#12 Le 16/01/2019, à 18:11
- Geronimo12
Re : questions avant installation avec ssd
merci Malbo,
je l'ai fais depuis mon linux mint installé, ça a fonctionné on dirait :
voici l'URL : http://paste.ubuntu.com/p/ykPXTCQ4fJ/
Dernière modification par Geronimo12 (Le 16/01/2019, à 18:11)
MSI GP60 leopard, Ubuntu 22.04.3 LTS Gnome 42.9 processeur Intel Core i5-4210H CPU @2.90Ghz x 4, mémoire vive 7,7 Go, carte graphique intel corporation 4th Gen Core processor integrated graphics controller, Nvidia GTX950M, avec ssd msata 120 Go
Hors ligne
#13 Le 16/01/2019, à 18:34
- malbo
Re : questions avant installation avec ssd
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid 8f180012-b0bd-4ea4-9a75-07180daf1bfe root hd1,msdos1
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 18.2
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdb5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 976,773,119 976,771,072 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 48,828,415 48,826,368 83 Linux
/dev/sdb2 48,830,462 234,440,703 185,610,242 5 Extended
/dev/sdb5 48,830,464 56,641,535 7,811,072 82 Linux swap / Solaris
/dev/sdb6 56,643,584 234,440,703 177,797,120 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 41cfeedd-1c71-439d-8466-3385726d5098 ext4
/dev/sdb1 ca10ca49-8495-44ab-aeb8-053eab3147d5 ext4
/dev/sdb5 46137a79-4f71-4d5d-aee2-19bae83308ba swap
/dev/sdb6 5e66b44e-dfc2-4e3a-99e1-8a5c5b454d5b ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 16 17:03 ata-HL-DT-ST_DVDRAM_GTB0N_KLMF1832040 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 16 17:08 ata-KINGSTON_SMS200S3120G_50026B725707E3D4 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 16 17:08 ata-KINGSTON_SMS200S3120G_50026B725707E3D4-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 16 17:08 ata-KINGSTON_SMS200S3120G_50026B725707E3D4-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 16 17:08 ata-KINGSTON_SMS200S3120G_50026B725707E3D4-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 Jan 16 17:08 ata-KINGSTON_SMS200S3120G_50026B725707E3D4-part6 -> ../../sdb6
lrwxrwxrwx 1 root root 9 Jan 16 17:08 ata-WDC_WD5000LPVX-22V0TT0_WD-WX11EA40R3VV -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 16 17:08 ata-WDC_WD5000LPVX-22V0TT0_WD-WX11EA40R3VV-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Jan 16 17:03 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 16 17:08 wwn-0x50014ee605603fc9 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 16 17:08 wwn-0x50014ee605603fc9-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Jan 16 17:08 wwn-0x50026b725707e3d4 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 16 17:08 wwn-0x50026b725707e3d4-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 16 17:08 wwn-0x50026b725707e3d4-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 16 17:08 wwn-0x50026b725707e3d4-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 Jan 16 17:08 wwn-0x50026b725707e3d4-part6 -> ../../sdb6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /srv/data ext4 (rw,nosuid,nodev,relatime,data=ordered)
/dev/sdb1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb6 /home ext4 (rw,relatime,data=ordered)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Linux Mint 18.2 Cinnamon 64-bit' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
linux /boot/vmlinuz-4.15.0-43-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-43-generic
}
submenu 'Options avancées pour Linux Mint 18.2 Cinnamon 64-bit' $menuentry_id_option 'gnulinux-advanced-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, avec Linux 4.15.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-advanced-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-43-generic…'
linux /boot/vmlinuz-4.15.0-43-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-43-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-43-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-init-upstart-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-43-generic…'
linux /boot/vmlinuz-4.15.0-43-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-43-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-recovery-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-43-generic…'
linux /boot/vmlinuz-4.15.0-43-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-43-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, avec Linux 4.15.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-advanced-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-42-generic…'
linux /boot/vmlinuz-4.15.0-42-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-42-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-42-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-init-upstart-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-42-generic…'
linux /boot/vmlinuz-4.15.0-42-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-42-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-42-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-recovery-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-42-generic…'
linux /boot/vmlinuz-4.15.0-42-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-42-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, avec Linux 4.15.0-39-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-39-generic-advanced-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-39-generic…'
linux /boot/vmlinuz-4.15.0-39-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-39-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-39-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-39-generic-init-upstart-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-39-generic…'
linux /boot/vmlinuz-4.15.0-39-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-39-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-39-generic-recovery-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-39-generic…'
linux /boot/vmlinuz-4.15.0-39-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-39-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, avec Linux 4.15.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-38-generic-advanced-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-38-generic…'
linux /boot/vmlinuz-4.15.0-38-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-38-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-38-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-38-generic-init-upstart-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-38-generic…'
linux /boot/vmlinuz-4.15.0-38-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-38-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-38-generic-recovery-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-38-generic…'
linux /boot/vmlinuz-4.15.0-38-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-38-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, avec Linux 4.15.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-36-generic-advanced-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-36-generic…'
linux /boot/vmlinuz-4.15.0-36-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-36-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-36-generic-init-upstart-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-36-generic…'
linux /boot/vmlinuz-4.15.0-36-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-36-generic
}
menuentry 'Linux Mint 18.2 Cinnamon 64-bit, with Linux 4.15.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-36-generic-recovery-ca10ca49-8495-44ab-aeb8-053eab3147d5' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
echo 'Chargement de Linux 4.15.0-36-generic…'
linux /boot/vmlinuz-4.15.0-36-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-36-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 ca10ca49-8495-44ab-aeb8-053eab3147d5
else
search --no-floppy --fs-uuid --set=root ca10ca49-8495-44ab-aeb8-053eab3147d5
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb6 during installation
UUID=5e66b44e-dfc2-4e3a-99e1-8a5c5b454d5b /home ext4 defaults 0 2
# swap was on /dev/sdb5 during installation
UUID=46137a79-4f71-4d5d-aee2-19bae83308ba none swap sw 0 0
/dev/disk/by-uuid/41cfeedd-1c71-439d-8466-3385726d5098 /srv/data ext4 nosuid,nodev,nofail 0 0
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
21.078674316 = 22.633054208 boot/grub/grub.cfg 1
4.274810791 = 4.590043136 boot/grub/i386-pc/core.img 1
7.516040802 = 8.070287360 boot/vmlinuz-4.15.0-36-generic 1
9.961662292 = 10.696253440 boot/vmlinuz-4.15.0-38-generic 1
11.083595276 = 11.900919808 boot/vmlinuz-4.15.0-39-generic 1
22.970806122 = 24.664715264 boot/vmlinuz-4.15.0-42-generic 1
8.542415619 = 9.172348928 boot/vmlinuz-4.15.0-43-generic 1
8.542415619 = 9.172348928 vmlinuz 1
22.970806122 = 24.664715264 vmlinuz.old 1
1.461910248 = 1.569714176 boot/initrd.img-4.15.0-36-generic 7
0.639190674 = 0.686325760 boot/initrd.img-4.15.0-38-generic 6
22.881381989 = 24.568696832 boot/initrd.img-4.15.0-39-generic 6
11.107948303 = 11.927068672 boot/initrd.img-4.15.0-42-generic 5
5.497066498 = 5.902430208 boot/initrd.img-4.15.0-43-generic 3
5.497066498 = 5.902430208 initrd.img 3
11.107948303 = 11.927068672 initrd.img.old 5
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdb2
00000000 ea e9 2a 63 16 c3 ac 98 c1 61 b3 8d 8b f6 94 cd |..*c.....a......|
00000010 f8 5a 09 a4 66 f4 7b 31 13 36 95 0a cb d9 de 0d |.Z..f.{1.6......|
00000020 88 68 29 15 aa 3f 04 71 eb 37 20 ed 48 a0 74 3d |.h)..?.q.7 .H.t=|
00000030 90 ea 13 39 db 25 2c 6a d1 41 78 02 12 97 e9 e6 |...9.%,j.Ax.....|
00000040 91 a8 1f 6f 6d da 4c 5b ba 8e 4a 90 c5 dc ee 32 |...om.L[..J....2|
00000050 20 db ba 5e 1d 24 c9 46 8e d0 97 28 46 19 da 6c | ..^.$.F...(F..l|
00000060 3b 14 19 81 3c 3e 97 30 18 55 fd 30 0b 84 a9 79 |;...<>.0.U.0...y|
00000070 4c 7b 2b ab 87 2e 35 2e 56 82 43 49 fd 1e af 0e |L{+...5.V.CI....|
00000080 3f 83 db de 94 2a 2b 51 fa b3 d8 ba a6 54 2a 8b |?....*+Q.....T*.|
00000090 1d 02 3c 8d bf 75 a3 10 e6 5c 77 fd cf ce d0 a4 |..<..u...\w.....|
000000a0 df 4d 68 a3 5c 75 8f 5e 79 89 80 ff 47 01 01 1f |.Mh.\u.^y...G...|
000000b0 39 b0 76 62 cd 98 67 e6 49 79 be 67 85 3d 08 26 |9.vb..g.Iy.g.=.&|
000000c0 a7 24 9d b6 38 5e 6d e1 c7 d5 36 b7 98 2f 3d 7c |.$..8^m...6../=||
000000d0 d5 c9 fc 8d 8d ff 3d ec 74 3e 8d b2 52 a7 62 a3 |......=.t>..R.b.|
000000e0 f3 6d 68 a9 c8 90 fb 2f fb 9b 75 4f 71 9f 81 08 |.mh..../..uOq...|
000000f0 65 30 80 ea 22 9d cb ae d0 b8 f3 92 d6 4e 82 51 |e0.."........N.Q|
00000100 3b 86 97 e7 09 bd cc d3 42 cb 54 35 6c d7 ce f8 |;.......B.T5l...|
00000110 63 6f 14 3b 9a c7 fb cc 22 c4 51 a0 7a 17 70 aa |co.;....".Q.z.p.|
00000120 3a f6 fb 5a b8 e7 61 f4 b2 78 21 61 90 14 46 58 |:..Z..a..x!a..FX|
00000130 cc 90 f3 85 8d e7 97 77 42 77 8a 70 e9 f5 b7 a3 |.......wBw.p....|
00000140 a3 3c 51 22 ba 47 60 23 15 c5 05 8e cc 92 80 1d |.<Q".G`#........|
00000150 38 fb 00 c7 15 48 08 03 83 31 23 86 de bf a9 30 |8....H...1#....0|
00000160 e0 fb 33 87 27 6e 8c 17 47 01 01 10 4f 8c 0d 66 |..3.'n..G...O..f|
00000170 e5 d1 db 10 3c 14 11 21 99 fc bf 14 1a ba 88 81 |....<..!........|
00000180 e5 d7 7d 80 70 19 73 38 07 f5 1f 0a e1 03 cf 7a |..}.p.s8.......z|
00000190 f1 c0 7d cd 4c 3e ad 8a f7 a8 8b 83 c8 1e 06 35 |..}.L>.........5|
000001a0 25 fd 84 6c 2a d4 cd 39 10 22 bf a2 41 37 bd 25 |%..l*..9."..A7.%|
000001b0 56 c0 f1 1e d6 c0 06 41 fc 39 88 56 8b 38 00 fe |V......A.9.V.8..|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 30 77 00 00 fe |...........0w...|
000001d0 ff ff 05 fe ff ff 02 30 77 00 00 00 99 0a 00 00 |.......0w.......|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/5292/mounts) leaked on lvs invocation. Parent PID 14463: bash
File descriptor 63 (pipe:[49737]) leaked on lvs invocation. Parent PID 14463: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20190116_1708 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version :
glade2script version : 3.2.3~ppa4
File descriptor 9 (/proc/5292/mounts) leaked on lvs invocation. Parent PID 6916: /bin/sh
boot-info is executed in installed-session (Linux Mint 18.2 Sonya, sonya, LinuxMint, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=ca10ca49-8495-44ab-aeb8-053eab3147d5 ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sdb1:L'OS actuellement utilisé - Linux Mint 18.2 Sonya CurrentSession:linux
=================== blkid:
/dev/sda1: UUID="41cfeedd-1c71-439d-8466-3385726d5098" TYPE="ext4" PARTUUID="0005bf48-01"
/dev/sdb1: UUID="ca10ca49-8495-44ab-aeb8-053eab3147d5" TYPE="ext4" PARTUUID="0004afc2-01"
/dev/sdb5: UUID="46137a79-4f71-4d5d-aee2-19bae83308ba" TYPE="swap" PARTUUID="0004afc2-05"
/dev/sdb6: UUID="5e66b44e-dfc2-4e3a-99e1-8a5c5b454d5b" TYPE="ext4" PARTUUID="0004afc2-06"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juin 28 2017 grub.d
total 96
-rwxr-xr-x 1 root root 9791 mai 11 2017 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 1180 oct. 25 2014 06_mint_theme
-rwxr-xr-x 1 root root 12552 mai 11 2017 10_linux
-rwxr-xr-x 1 root root 10634 oct. 1 2012 10_lupin
-rwxr-xr-x 1 root root 11082 mai 11 2017 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 11 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 mai 11 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 11 2017 40_custom
-rwxr-xr-x 1 root root 216 mai 11 2017 41_custom
-rw-r--r-- 1 root root 483 mai 11 2017 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sdb1 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, .
sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /srv/data.
sdb6 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /home.
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA WDC WD5000LPVX-2:;
1:1049kB:500GB:500GB:ext4::;
BYT;
/dev/sdb:120GB:scsi:512:512:msdos:ATA KINGSTON SMS200S:;
1:1049kB:25.0GB:25.0GB:ext4::boot;
2:25.0GB:120GB:95.0GB:::;
5:25.0GB:29.0GB:3999MB:linux-swap(v1)::;
6:29.0GB:120GB:91.0GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 111,8G
sdb2 part 1K
sdb5 part swap 3,7G
sdb1 part ext4 23,3G
sdb6 part ext4 84,8G
sr0 rom 1024M
sda disk 465,8G
sda1 part ext4 465,8G
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 0 0 0 running
sdb2 0 0 0
sdb5 0 0 0 [SWAP]
sdb1 0 0 0 /
sdb6 0 0 0 /home
sr0 1 0 1 running
sda 1 0 0 running
sda1 1 0 0 /srv/data
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4012212k,nr_inodes=1003053,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=808556k,mode=755)
/dev/sdb1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma,release_agent=/run/cgmanager/agents/cgm-release-agent.rdma)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15456)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/dev/sdb6 on /home type ext4 (rw,relatime,data=ordered)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
/dev/sda1 on /srv/data type ext4 (rw,nosuid,nodev,relatime,data=ordered)
cgmfs on /run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=808556k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 sdb2 sdb5 sdb6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null nvidia0 nvidiactl nvidia-modeset nvidia-uvm port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb5 sdb6 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 790M 9.4M 781M 2% /run
/dev/sdb1 ext4 23G 14G 8.0G 64% /
tmpfs tmpfs 3.9G 36M 3.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sdb6 ext4 84G 26G 54G 33% /home
/dev/sda1 ext4 459G 383G 53G 89% /srv/data
cgmfs tmpfs 100K 0 100K 0% /run/cgmanager/fs
tmpfs tmpfs 790M 32K 790M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0005bf48
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 976773119 976771072 465.8G 83 Linux
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0004afc2
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 48828415 48826368 23.3G 83 Linux
/dev/sdb2 48830462 234440703 185610242 88.5G 5 Extended
/dev/sdb5 48830464 56641535 7811072 3.7G 82 Linux swap / Solaris
/dev/sdb6 56643584 234440703 177797120 84.8G 83 Linux
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sdb1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sdb (ATA KINGSTON SMS200S) !
=================== User settings
The settings chosen by the user will not act on the boot.
pastebinit packages needed
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
paste2.org ko ()Quand tu vas faire l'installation, tu sélectionneras "Effacer le disque et installer Ubuntu" (*). Comme ton disque dur et ton SSD sont bien détectés, l'installateur te montrera ces deux lecteurs et te demandera sur quel lecteur tu souhaites faire l'installation. Là, tu sélectionneras le SSD
(*) ne coche PAS la case "Chiffrer la nouvelle installation de Ubuntu pour la sécurité" et ne coche PAS non plus la case "Utiliser LVM pour la nouvelle installation de Ubuntu"
Dernière modification par malbo (Le 16/01/2019, à 18:50)
Hors ligne
#14 Le 17/01/2019, à 00:42
- Geronimo12
Re : questions avant installation avec ssd
super Malbo,
merci c'est clair !
belle nuit
MSI GP60 leopard, Ubuntu 22.04.3 LTS Gnome 42.9 processeur Intel Core i5-4210H CPU @2.90Ghz x 4, mémoire vive 7,7 Go, carte graphique intel corporation 4th Gen Core processor integrated graphics controller, Nvidia GTX950M, avec ssd msata 120 Go
Hors ligne