Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 10/01/2019, à 04:59

leborgne

[Résolu SSD neuf HS] Problème démarrage

Bonjour,

Avant, quelque fois, je devais rebooter  pour démarrer normalement sans mot de passe. J'ai donc réinstallé Win7 et Ubuntu dans sa dernière version, le tout sur un SSD. en même temps j'ai dû changer la pile de ma carte mère. Maintenant le démarrage est pire, dés fois je dois aller dans les options Ubuntu (Grub ?) je prends la première, dés fois ça marche, ou alors je dois rebooter et essayer encore pour démarrer.

Sur un autre post j'ai vu qu'il fallait un boot-info, alors voilà le lien. Pour moi c'est chinois :-) 

http://paste.ubuntu.com/p/Hbxd6k99Rw/

Merci ;-)

Dernière modification par leborgne (Le 18/01/2019, à 02:51)

Hors ligne

#2 Le 10/01/2019, à 08:45

malbo

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour,
Ton Boot-Info est là :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos5)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /Windows/System32/winload.exe

sda3: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048       718,847       716,800   7 NTFS / exFAT / HPFS
/dev/sda2             718,848    78,217,562    77,498,715   7 NTFS / exFAT / HPFS
/dev/sda3          78,219,262   234,440,703   156,221,442   5 Extended
/dev/sda5          78,219,264   234,440,703   156,221,440  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop10                                             squashfs   
/dev/loop11                                             squashfs   
/dev/loop12                                             squashfs   
/dev/loop13                                             squashfs   
/dev/loop14                                             squashfs   
/dev/loop15                                             squashfs   
/dev/loop16                                             squashfs   
/dev/loop17                                             squashfs   
/dev/loop18                                             squashfs   
/dev/loop19                                             squashfs   
/dev/loop2                                              squashfs   
/dev/loop20                                             squashfs   
/dev/loop21                                             squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/loop8                                              squashfs   
/dev/loop9                                              squashfs   
/dev/sda1        FE50DD7C50DD3C59                       ntfs       Réservé au système
/dev/sda2        0C56DFC156DFA9AA                       ntfs       
/dev/sda5        29a38fd8-a1bc-4785-baf3-fb0813feebb0   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan 10 04:38 ata-KINGSTON_SA400S37120G_50026B76820BE14F -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 04:41 ata-KINGSTON_SA400S37120G_50026B76820BE14F-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 10 04:41 ata-KINGSTON_SA400S37120G_50026B76820BE14F-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 10 04:38 ata-KINGSTON_SA400S37120G_50026B76820BE14F-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 10 04:38 ata-KINGSTON_SA400S37120G_50026B76820BE14F-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Jan  9 19:48 ata-Optiarc_DVD_RW_AD-7200S -> ../../sr0
lrwxrwxrwx 1 root root  9 Jan 10 04:38 wwn-0x50026b76820be14f -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 04:41 wwn-0x50026b76820be14f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 10 04:41 wwn-0x50026b76820be14f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 10 04:38 wwn-0x50026b76820be14f-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jan 10 04:38 wwn-0x50026b76820be14f-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda5        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  29a38fd8-a1bc-4785-baf3-fb0813feebb0
else
  search --no-floppy --fs-uuid --set=root 29a38fd8-a1bc-4785-baf3-fb0813feebb0
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-29a38fd8-a1bc-4785-baf3-fb0813feebb0' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  29a38fd8-a1bc-4785-baf3-fb0813feebb0
	else
	  search --no-floppy --fs-uuid --set=root 29a38fd8-a1bc-4785-baf3-fb0813feebb0
	fi
        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=29a38fd8-a1bc-4785-baf3-fb0813feebb0 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-29a38fd8-a1bc-4785-baf3-fb0813feebb0' {
	menuentry 'Ubuntu, avec Linux 4.15.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-advanced-29a38fd8-a1bc-4785-baf3-fb0813feebb0' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  29a38fd8-a1bc-4785-baf3-fb0813feebb0
		else
		  search --no-floppy --fs-uuid --set=root 29a38fd8-a1bc-4785-baf3-fb0813feebb0
		fi
		echo	'Chargement de Linux 4.15.0-43-generic…'
	        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=29a38fd8-a1bc-4785-baf3-fb0813feebb0 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-43-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-recovery-29a38fd8-a1bc-4785-baf3-fb0813feebb0' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  29a38fd8-a1bc-4785-baf3-fb0813feebb0
		else
		  search --no-floppy --fs-uuid --set=root 29a38fd8-a1bc-4785-baf3-fb0813feebb0
		fi
		echo	'Chargement de Linux 4.15.0-43-generic…'
	        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=29a38fd8-a1bc-4785-baf3-fb0813feebb0 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-43-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-advanced-29a38fd8-a1bc-4785-baf3-fb0813feebb0' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  29a38fd8-a1bc-4785-baf3-fb0813feebb0
		else
		  search --no-floppy --fs-uuid --set=root 29a38fd8-a1bc-4785-baf3-fb0813feebb0
		fi
		echo	'Chargement de Linux 4.15.0-42-generic…'
	        linux	/boot/vmlinuz-4.15.0-42-generic root=UUID=29a38fd8-a1bc-4785-baf3-fb0813feebb0 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-42-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-42-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-recovery-29a38fd8-a1bc-4785-baf3-fb0813feebb0' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  29a38fd8-a1bc-4785-baf3-fb0813feebb0
		else
		  search --no-floppy --fs-uuid --set=root 29a38fd8-a1bc-4785-baf3-fb0813feebb0
		fi
		echo	'Chargement de Linux 4.15.0-42-generic…'
	        linux	/boot/vmlinuz-4.15.0-42-generic root=UUID=29a38fd8-a1bc-4785-baf3-fb0813feebb0 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-42-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  29a38fd8-a1bc-4785-baf3-fb0813feebb0
	else
	  search --no-floppy --fs-uuid --set=root 29a38fd8-a1bc-4785-baf3-fb0813feebb0
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5  29a38fd8-a1bc-4785-baf3-fb0813feebb0
	else
	  search --no-floppy --fs-uuid --set=root 29a38fd8-a1bc-4785-baf3-fb0813feebb0
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-FE50DD7C50DD3C59' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  FE50DD7C50DD3C59
	else
	  search --no-floppy --fs-uuid --set=root FE50DD7C50DD3C59
	fi
	parttool ${root} hidden-
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=29a38fd8-a1bc-4785-baf3-fb0813feebb0 /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  73.995540619 = 79.452106752   boot/grub/grub.cfg                             2
  53.719085693 = 57.680429056   boot/grub/i386-pc/core.img                     1
  43.106338501 = 46.285078528   boot/vmlinuz-4.15.0-42-generic                 1
  63.809467316 = 68.514893824   boot/vmlinuz-4.15.0-43-generic                 2
  63.809467316 = 68.514893824   vmlinuz                                        2
  43.106338501 = 46.285078528   vmlinuz.old                                    1
  44.025329590 = 47.271837696   boot/initrd.img-4.15.0-42-generic              1
  64.246032715 = 68.983652352   boot/initrd.img-4.15.0-43-generic              1
  64.246032715 = 68.983652352   initrd.img                                     1
  44.025329590 = 47.271837696   initrd.img.old                                 1


ADDITIONAL INFORMATION :
=================== log of boot-info 20190110_0438 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=29a38fd8-a1bc-4785-baf3-fb0813feebb0 ro quiet splash
The disk contains an unclean file system (0, 0).
The file system wasn't safely closed on Windows. Fixing.
The disk contains an unclean file system (0, 0).
The file system wasn't safely closed on Windows. Fixing.

=================== os-prober:
/dev/sda5:L'OS actuellement utilisé - Ubuntu 18.04.1 LTS CurrentSession:linux
/dev/sda1:Windows 7:Windows:chain

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="FE50DD7C50DD3C59" TYPE="ntfs" PARTUUID="9965bc08-01"
/dev/sda2: UUID="0C56DFC156DFA9AA" TYPE="ntfs" PARTUUID="9965bc08-02"
/dev/sda5: UUID="29a38fd8-a1bc-4785-baf3-fb0813feebb0" TYPE="ext4" PARTUUID="9965bc08-05"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
/dev/loop13: TYPE="squashfs"
/dev/loop14: TYPE="squashfs"
/dev/loop15: TYPE="squashfs"
/dev/loop16: TYPE="squashfs"
/dev/loop17: TYPE="squashfs"
/dev/loop18: TYPE="squashfs"
/dev/loop19: TYPE="squashfs"
/dev/loop20: TYPE="squashfs"
/dev/loop21: TYPE="squashfs"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda2.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 déc.  13 17:41 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 17 20:13 00_header
-rwxr-xr-x 1 root root  6258 juil. 16 17:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 20:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 20:13 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 20:13 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 17 20:13 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 17 20:13 40_custom
-rwxr-xr-x 1 root root   216 juil. 17 20:13 41_custom
-rw-r--r-- 1 root root   483 juil. 17 20:13 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda5	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda2.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:120GB:scsi:512:512:msdos:ATA KINGSTON SA400S3:;
1:1049kB:368MB:367MB:ntfs::boot;
2:368MB:40.0GB:39.7GB:ntfs::;
3:40.0GB:120GB:80.0GB:::;
5:40.0GB:120GB:80.0GB:ext4::;

=================== lsblk:
KNAME  TYPE FSTYPE     SIZE LABEL
fd0    disk              4K
loop0  loop squashfs 140,7M
loop1  loop squashfs    13M
loop2  loop squashfs  87,1M
loop3  loop squashfs 143,6M
loop4  loop squashfs  53,7M
loop5  loop squashfs 140,9M
loop6  loop squashfs   3,7M
loop7  loop squashfs   2,3M
loop8  loop squashfs  86,9M
loop9  loop squashfs  34,7M
loop10 loop squashfs  89,5M
loop11 loop squashfs 143,6M
loop12 loop squashfs  14,5M
loop13 loop squashfs  34,6M
loop14 loop squashfs  14,5M
loop15 loop squashfs   2,3M
loop16 loop squashfs  89,5M
loop17 loop squashfs 143,6M
loop18 loop squashfs    13M
loop19 loop squashfs    45M
loop20 loop squashfs  53,7M
loop21 loop squashfs   3,7M
sda    disk          111,8G
sda1   part ntfs       350M Réservé au système
sda2   part ntfs        37G
sda3   part              1K
sda5   part ext4      74,5G
sr0    rom            1024M

KNAME  ROTA RO RM STATE   MOUNTPOINT
fd0       1  0  1
loop0     1  1  0         /snap/gnome-3-26-1604/74
loop1     1  1  0         /snap/gnome-characters/103
loop2     1  1  0         /snap/pdfmixtool/312
loop3     1  1  0         /snap/chromium/562
loop4     1  1  0         /snap/core18/512
loop5     1  1  0         /snap/gnome-3-26-1604/70
loop6     1  1  0         /snap/gnome-system-monitor/57
loop7     1  1  0         /snap/gnome-calculator/180
loop8     1  1  0         /snap/core/4917
loop9     1  1  0         /snap/gtk-common-themes/319
loop10    1  1  0         /snap/core/6130
loop11    1  1  0         /snap/chromium/550
loop12    1  1  0         /snap/gnome-logs/45
loop13    1  1  0         /snap/gtk-common-themes/818
loop14    1  1  0         /snap/gnome-logs/37
loop15    1  1  0         /snap/gnome-calculator/260
loop16    1  1  0         /snap/core/6034
loop17    1  1  0         /snap/chromium/538
loop18    1  1  0         /snap/gnome-characters/139
loop19    1  1  0         /snap/core18/442
loop20    1  1  0         /snap/core18/536
loop21    1  1  0         /snap/gnome-system-monitor/51
sda       0  0  0 running
sda1      0  0  0         /mnt/boot-sav/sda1
sda2      0  0  0         /mnt/boot-sav/sda2
sda3      0  0  0
sda5      0  0  0         /
sr0       1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4053712k,nr_inodes=1013428,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=816796k,mode=755)
/dev/sda5 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15484)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/var/lib/snapd/snaps/gnome-3-26-1604_74.snap on /snap/gnome-3-26-1604/74 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/pdfmixtool_312.snap on /snap/pdfmixtool/312 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/chromium_562.snap on /snap/chromium/562 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_512.snap on /snap/core18/512 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_57.snap on /snap/gnome-system-monitor/57 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/chromium_550.snap on /snap/chromium/550 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_45.snap on /snap/gnome-logs/45 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_818.snap on /snap/gtk-common-themes/818 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_6130.snap on /snap/core/6130 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_6034.snap on /snap/core/6034 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_260.snap on /snap/gnome-calculator/260 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/chromium_538.snap on /snap/chromium/538 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_139.snap on /snap/gnome-characters/139 type squashfs (ro,nodev,relatime,x-gdu.hide)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
/var/lib/snapd/snaps/core18_442.snap on /snap/core18/442 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_536.snap on /snap/core18/536 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
tmpfs on /run/user/121 type tmpfs (rw,nosuid,nodev,relatime,size=816792k,mode=700,uid=121,gid=125)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=816792k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
tmpfs on /run/snapd/ns type tmpfs (rw,nosuid,noexec,relatime,size=816796k,mode=755)
nsfs on /run/snapd/ns/chromium.mnt type nsfs (rw)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)


=================== ls:
/sys/block/fd0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd fd0 full fuse fw0 hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff ef 0a 00 00 00 00 00  |................|
00000030  aa 74 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |.t..............|
00000040  f6 00 00 00 01 00 00 00  59 3c dd 50 7c dd 50 fe  |........Y<.P|.P.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 f8 0a 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  58 89 9e 04 00 00 00 00  |........X.......|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  aa a9 df 56 c1 df 56 0c  |...........V..V.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 45 72  |t.............Er|
00000190  72 65 75 72 20 6c 65 63  74 75 72 65 20 64 69 73  |reur lecture dis|
000001a0  71 75 65 00 0d 0a 42 4f  4f 54 4d 47 52 20 61 62  |que...BOOTMGR ab|
000001b0  73 65 6e 74 00 0d 0a 42  4f 4f 54 4d 47 52 20 63  |sent...BOOTMGR c|
000001c0  6f 6d 70 72 65 73 73 82  00 0d 0a 43 74 72 6c 2b  |ompress....Ctrl+|
000001d0  41 6c 74 2b 53 75 70 70  72 20 70 6f 75 72 20 72  |Alt+Suppr pour r|
000001e0  65 64 82 6d 61 72 72 65  72 0d 0a 00 6f 20 72 65  |ed.marrer...o re|
000001f0  73 74 61 72 74 0d 0a 00  8c a4 b5 c9 00 00 55 aa  |start.........U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     798M  2.0M  796M   1% /run
/dev/sda5      ext4       73G   31G   39G  45% /
tmpfs          tmpfs     3.9G   59M  3.9G   2% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/loop0     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/74
/dev/loop2     squashfs   88M   88M     0 100% /snap/pdfmixtool/312
/dev/loop3     squashfs  144M  144M     0 100% /snap/chromium/562
/dev/loop1     squashfs   13M   13M     0 100% /snap/gnome-characters/103
/dev/loop5     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/70
/dev/loop4     squashfs   54M   54M     0 100% /snap/core18/512
/dev/loop6     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/57
/dev/loop8     squashfs   87M   87M     0 100% /snap/core/4917
/dev/loop7     squashfs  2.4M  2.4M     0 100% /snap/gnome-calculator/180
/dev/loop9     squashfs   35M   35M     0 100% /snap/gtk-common-themes/319
/dev/loop11    squashfs  144M  144M     0 100% /snap/chromium/550
/dev/loop12    squashfs   15M   15M     0 100% /snap/gnome-logs/45
/dev/loop13    squashfs   35M   35M     0 100% /snap/gtk-common-themes/818
/dev/loop10    squashfs   90M   90M     0 100% /snap/core/6130
/dev/loop14    squashfs   15M   15M     0 100% /snap/gnome-logs/37
/dev/loop16    squashfs   90M   90M     0 100% /snap/core/6034
/dev/loop15    squashfs  2.3M  2.3M     0 100% /snap/gnome-calculator/260
/dev/loop17    squashfs  144M  144M     0 100% /snap/chromium/538
/dev/loop18    squashfs   13M   13M     0 100% /snap/gnome-characters/139
/dev/loop19    squashfs   46M   46M     0 100% /snap/core18/442
/dev/loop20    squashfs   54M   54M     0 100% /snap/core18/536
/dev/loop21    squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/51
tmpfs          tmpfs     798M   16K  798M   1% /run/user/121
tmpfs          tmpfs     798M   80K  798M   1% /run/user/1000
/dev/sda1      fuseblk   350M   39M  312M  11% /mnt/boot-sav/sda1
/dev/sda2      fuseblk    37G   19G   19G  50% /mnt/boot-sav/sda2

=================== fdisk -l:
Disk /dev/loop0: 140.7 MiB, 147496960 bytes, 288080 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 87.1 MiB, 91373568 bytes, 178464 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 143.6 MiB, 150556672 bytes, 294056 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 53.7 MiB, 56287232 bytes, 109936 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 3.7 MiB, 3878912 bytes, 7576 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x9965bc08

Device     Boot    Start       End   Sectors  Size Id Type
/dev/sda1  *        2048    718847    716800  350M  7 HPFS/NTFS/exFAT
/dev/sda2         718848  78217562  77498715   37G  7 HPFS/NTFS/exFAT
/dev/sda3       78219262 234440703 156221442 74.5G  5 Extended
/dev/sda5       78219264 234440703 156221440 74.5G 83 Linux




Disk /dev/loop8: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop9: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop10: 89.5 MiB, 93835264 bytes, 183272 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop11: 143.6 MiB, 150556672 bytes, 294056 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop12: 14.5 MiB, 15208448 bytes, 29704 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop13: 34.6 MiB, 36216832 bytes, 70736 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop14: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop15: 2.3 MiB, 2355200 bytes, 4600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop16: 89.5 MiB, 93818880 bytes, 183240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop17: 143.6 MiB, 150560768 bytes, 294064 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop18: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop19: 45 MiB, 47235072 bytes, 92256 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop20: 53.7 MiB, 56283136 bytes, 109928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop21: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 18.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Je n'y vois aucune anomalie susceptible d'expliquer le problème de démarrage que tu rencontres. J'ai trouvé une autre discussion sur le forum (initialisée par InforMathieu) qui mentionne un souci avec le même modèle de SSD que toi : https://forum.ubuntu-fr.org/viewtopic.p … #p21965016
Cependant, il s'agissait d'un montage assez particulier (SSD à la place du lecteur DVD via un caddy) et il est bien possible que ça ne te concerne pas. Toutefois, le principe de la solution trouvée par InforMathieu est intéressant : il est de démarrer sur autre chose que le SSD. Dans son cas, c'est sur une partition /boot du HDD mais ça pourrait aussi bien être une clé USB.

EDIT : c'est quoi le nom du modèle de ta carte-mère ?

Dernière modification par malbo (Le 10/01/2019, à 09:00)

Hors ligne

#3 Le 10/01/2019, à 19:30

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour,

Merci beaucoup, c'est un SSD pas cher :-)
La carte mère est une ASUS P5Q-E Motherboard. BIOS 2101 de 2009.
Voici une photo de mon écran quand ça ne veut pas aller, si ça peut aider.
1547144913-message.png

Dernière modification par leborgne (Le 10/01/2019, à 19:54)

Hors ligne

#4 Le 11/01/2019, à 08:55

malbo

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour,
On voit bien que c'est un plantage puisqu'il y a cette mention : "Kernel panic - not syncing: VFS:unable to mount root fs on unknown-block(0,0)". On y voit aussi "4.15.0-43" donc il s'agit d'un démarrage sur le noyau le plus récent. Peux-tu essayer de passer par les "Options avancées pour Ubuntu" du menu Grub au démarrage et sélectionner "Ubuntu, avec Linux 4.15.0-42-generic" ? Si ça merde pareil (Kernel panic...) avec le noyau 4.15.0-42, ça voudrait dire que ce n'est pas un problème de noyau. Cela permettrait d'écarter cette piste d'un noyau défectueux.

D'autre part, je relis ceci dans ton post #1 sans être certain de bien comprendre ce que tu veux dire : "Avant, quelque fois, je devais rebooter  pour démarrer normalement sans mot de passe". Je crois comprendre que tu as choisi l'option "Ouvrir la session automatiquement" à l'étape 7 de l'installation. Est-ce bien le cas pour ton installation actuelle ?

Dernière modification par malbo (Le 11/01/2019, à 08:59)

Hors ligne

#5 Le 14/01/2019, à 03:56

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour,

Merci, j'ai impérativement besoin de mon ordi ces jours, donc je ne l'arrête pas, mais j'essayerai.

Oui, c'est avant que je réinstalle, j'avais choisi la session automatique, mais dés fois il me demandait un MDP, je rebootais, généralement une fois, mais dés fois 2, voir 3, pour qu'il démarre normalement sans demander de MDP. C’était plutôt mauvais signe, j'ai donc réinstallé avec la dernière version, mais c'est pire. Lol !

A bientôt (j’espère)

Hors ligne

#6 Le 14/01/2019, à 10:41

moko138

Re : [Résolu SSD neuf HS] Problème démarrage

leborgne a écrit :
[    0.996396] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)


En session installée :
a) Installer l'utilitaire permettant de voir l'état du disque :

sudo apt-get install --no-install-recommends smartmontools

  - -

b) Lire les données SMART :
faire sans ajouter de chiffre :

sudo smartctl -s on -o on -a /dev/sda

et en donner le retour complet et entre balises-code.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#7 Le 15/01/2019, à 04:33

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour,

Merci. Alors je l'ai arrêté, et il a démarré normalement :-o J'ai juste laissé sous tension, un essai au pif, car pour l'histoire du changement de la pile de la carte mère, je devais rentrer dans le BIOS, ou choisir sa config par défaut, quand l'ordi restait 2 jours sans tourner et courant coupé (sans certitude qu'il y ait un rapport). Mais la pile était bien à changer, avec à peine 1 volt.   

Voici, en espérant avoir bien fait.

sudo smartctl -s on -o on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-43-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KINGSTON SA400S37120G
Serial Number:    50026B76820BE14F
LU WWN Device Id: 5 0026b7 6820be14f
Firmware Version: SBFK71E0
User Capacity:    120034123776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   Unknown(0x0ff8) (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Tue Jan 15 03:56:58 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Automatic Timers not supported

SMART Automatic Offline Testing Enabled every four hours.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   000   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       554
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       40
148 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
149 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       4
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       8
170 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       9
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       65541
181 Program_Fail_Cnt_Total  0x0032   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       8
194 Temperature_Celsius     0x0022   077   067   000    Old_age   Always       -       23 (Min/Max 18/33)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       4
218 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       2006
231 Temperature_Celsius     0x0000   001   001   000    Old_age   Offline      -       99
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       166
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       152
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       328
244 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       5
246 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       9264

SMART Error Log Version: 1
ATA Error Count: 1885 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1885 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 28 b8 dc 6c e7  Error: ICRC, ABRT at LBA = 0x076cdcb8 = 124574904

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 28 b8 dc 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 08 a0 dc 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 28 70 dc 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 18 50 dc 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 08 30 dc 6c e7 08      00:00:00.000  WRITE DMA

Error 1884 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 18 b8 d5 6c e7  Error: ICRC, ABRT at LBA = 0x076cd5b8 = 124573112

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 18 b8 d5 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 18 88 d5 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 10 50 d5 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 18 30 d5 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 38 f0 d4 6c e7 08      00:00:00.000  WRITE DMA

Error 1883 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 08 f8 ce 6c e7  Error: ICRC, ABRT at LBA = 0x076ccef8 = 124571384

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 f8 ce 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 08 e8 ce 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 08 d8 ce 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 08 c8 ce 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 08 b8 ce 6c e7 08      00:00:00.000  WRITE DMA

Error 1882 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 20 58 cb 6c e7  Error: ICRC, ABRT at LBA = 0x076ccb58 = 124570456

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 20 58 cb 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 10 40 cb 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 08 28 cb 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 10 10 cb 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 10 f0 ca 6c e7 08      00:00:00.000  WRITE DMA

Error 1881 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 18 38 c9 6c e7  Error: ICRC, ABRT at LBA = 0x076cc938 = 124569912

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 18 38 c9 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 10 18 c9 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 08 08 c9 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 08 d8 c8 6c e7 08      00:00:00.000  WRITE DMA
  ca 00 18 b8 c8 6c e7 08      00:00:00.000  WRITE DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#8 Le 15/01/2019, à 04:49

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

malbo a écrit :

Peux-tu essayer de passer par les "Options avancées pour Ubuntu" du menu Grub au démarrage et sélectionner "Ubuntu, avec Linux 4.15.0-42-generic" ? Si ça merde pareil (Kernel panic...) avec le noyau 4.15.0-42, ça voudrait dire que ce n'est pas un problème de noyau. Cela permettrait d'écarter cette piste d'un noyau défectueux.

Bonjour,
Je viens de redémarrer sans problème, ni message (Kernel panic) en choisissant "Ubuntu, avec Linux 4.15.0-42-generic"
Tant mieux, s'il recommence cela réduira les pistes.

Merci ;-)

Hors ligne

#9 Le 15/01/2019, à 07:09

malbo

Re : [Résolu SSD neuf HS] Problème démarrage

Intéressant. Dans les jours qui viennent, quand tu démarreras l'ordi, passe toujours par les options avancées de Grub et sélectionne ce noyau 4.15.0-42 pour démarrer dessus. Dis-nous si il n'y a toujours aucun problème en démarrant comme ça. Si c'est le cas, on te dira comment faire pour réinstaller le noyau 4.15.0-43 qui merde.

D'autre part, pourrais-tu refaire la manip pour voir l'état du disque et poster le nouveau résultat obtenu ? Motif : on y voit des choses étranges et j'aimerais bien être sûr.

Dernière modification par malbo (Le 15/01/2019, à 07:16)

Hors ligne

#10 Le 15/01/2019, à 09:17

moko138

Re : [Résolu SSD neuf HS] Problème démarrage

malbo a écrit :

D'autre part, pourrais-tu refaire la manip pour voir l'état du disque et poster le nouveau résultat obtenu ? Motif : on y voit des choses étranges et j'aimerais bien être sûr.

+1

Sur un disque quasi neuf, ("554" heures),

173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       65541
199 UDMA_CRC_Error_Count    -       4
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       166

ATA Error Count: 1885
Error 1885 occurred (...) ICRC, ABRT at LBA = 0x076cdcb8 = 124574904
Error 1884 occurred (...) ICRC, ABRT at LBA = 0x076cd5b8 = 124573112
Error 1883 occurred (...) ICRC, ABRT at LBA =  0x076ccef8 = 124571384
Error 1882 occurred (...) ICRC, ABRT at LBA =  0x076ccb58 = 124570456
Error 1881 occurred (...) ICRC, ABRT at LBA =  0x076cc938 = 124569912

est anormal !

Pour info, man smartctl dit :

ABRT:  Command ABoRTed
ICRC:  Interface Cyclic Redundancy Code (CRC) error

et selon https://en.wikipedia.org/wiki/S.M.A.R.T. :

173      SSD Wear Leveling Count
Counts the maximum worst erase count on any block.

199  UltraDMA CRC Error Count     
The count of errors in data transfer via the interface cable as determined by ICRC (Interface Cyclic Redundancy Check).

233      Media Wearout Indicator (SSDs)
Intel SSDs report a normalized value from 100, a new drive, to a minimum of 1. It decreases while the NAND erase cycles increase from 0 to the maximum-rated cycles.


Il est clair que, entre les LBA 124.500.000 et 124.600.000, c'est-à-dire, sauf erreur de ma part, en plein milieu du SSD de 120 Go, il y a une zone inutilisable et qui risque de s'étendre.


Pour moi, un disque quasi neuf défectueux implique de faire jouer la garantie.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#11 Le 17/01/2019, à 05:10

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour,

Merci à vous deux. Alors pour les nouvelles :

Le disque est sain (99 ℃ / 210 ℉)

Je l'ai touché sans me brûler :-) je dirais qu'il est à température humaine.

En le laissant sous tension, l'ordi a démarré sans problème, sauf un bip avant l'affichage du Grub.
En ne le laissant pas sous tension :
- Bip avant Grub / Press any key to continue => Barre tab = rien => Reset
- Bip avant Grub / Press any key to continue => Barre tab = Kernel panic => Reset
- Bip avant Grub => Options Ubuntu => j'ai pris la première car oublié laquelle choisir => démarrage ! Ouf :-)

Sur linux-4.15.0-43-generic

sudo smartctl -s on -o on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-43-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KINGSTON SA400S37120G
Serial Number:    50026B76820BE14F
LU WWN Device Id: 5 0026b7 6820be14f
Firmware Version: SBFK71E0
User Capacity:    120034123776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   Unknown(0x0ff8) (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Thu Jan 17 04:37:43 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Automatic Timers not supported

SMART Automatic Offline Testing Enabled every four hours.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   000   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       592
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       41
148 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
149 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       5
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       8
170 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       9
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       65541
181 Program_Fail_Cnt_Total  0x0032   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       8
194 Temperature_Celsius     0x0022   075   067   000    Old_age   Always       -       25 (Min/Max 18/33)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       5
218 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       2035
231 Temperature_Celsius     0x0000   001   001   000    Old_age   Offline      -       99
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       174
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       158
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       340
244 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       5
246 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       9756

SMART Error Log Version: 1
ATA Error Count: 1892 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1892 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 08 e8 05 6d e7  Error: ICRC, ABRT at LBA = 0x076d05e8 = 124585448

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 e8 05 6d e7 08      00:00:00.000  WRITE DMA
  ca 00 08 c8 05 6d e7 08      00:00:00.000  WRITE DMA
  ca 00 08 a8 05 6d e7 08      00:00:00.000  WRITE DMA
  ca 00 08 88 05 6d e7 08      00:00:00.000  WRITE DMA
  ca 00 08 60 05 6d e7 08      00:00:00.000  WRITE DMA

Error 1891 occurred at disk power-on lifetime: 23 hours (0 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 30 b0 94 3c e9  Error: ICRC, ABRT at LBA = 0x093c94b0 = 154965168

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 30 b0 94 3c e9 08      00:00:00.000  WRITE DMA
  35 00 00 b0 c1 3b e0 08      00:00:00.000  WRITE DMA EXT
  ca 00 38 58 2d 39 e8 08      00:00:00.000  WRITE DMA
  35 00 c0 f0 bc 3b e0 08      00:00:00.000  WRITE DMA EXT
  35 00 f0 00 b8 3b e0 08      00:00:00.000  WRITE DMA EXT

Error 1890 occurred at disk power-on lifetime: 22 hours (0 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 10 80 49 1f ea  Error: ICRC, ABRT at LBA = 0x0a1f4980 = 169822592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 10 80 49 1f ea 08      00:00:00.000  WRITE DMA
  ca 00 08 70 49 1f ea 08      00:00:00.000  WRITE DMA
  ca 00 08 60 49 1f ea 08      00:00:00.000  WRITE DMA
  ca 00 08 38 49 1f ea 08      00:00:00.000  WRITE DMA
  ca 00 18 18 49 1f ea 08      00:00:00.000  WRITE DMA

Error 1889 occurred at disk power-on lifetime: 20 hours (0 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 a0 10 ba 35 e9  Error: ICRC, ABRT at LBA = 0x0935ba10 = 154515984

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 a0 10 ba 35 e9 08      00:00:00.000  WRITE DMA
  c8 00 90 30 e5 77 ea 08      00:00:00.000  READ DMA
  c8 00 80 b0 e4 77 ea 08      00:00:00.000  READ DMA
  c8 00 40 70 e4 77 ea 08      00:00:00.000  READ DMA
  c8 00 20 50 e4 77 ea 08      00:00:00.000  READ DMA

Error 1888 occurred at disk power-on lifetime: 3 hours (0 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 68 c0 a9 31 e9  Error: ICRC, ABRT at LBA = 0x0931a9c0 = 154249664

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 68 c0 a9 31 e9 08      00:00:00.000  WRITE DMA
  ca 00 08 00 a9 38 e8 08      00:00:00.000  WRITE DMA
  ca 00 08 c0 b5 2a e8 08      00:00:00.000  WRITE DMA
  ca 00 08 e8 95 29 e8 08      00:00:00.000  WRITE DMA
  ca 00 08 c8 93 29 e8 08      00:00:00.000  WRITE DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Sur linux-4.15.0-42-generic

sudo smartctl -s on -o on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-42-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KINGSTON SA400S37120G
Serial Number:    50026B76820BE14F
LU WWN Device Id: 5 0026b7 6820be14f
Firmware Version: SBFK71E0
User Capacity:    120034123776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   Unknown(0x0ff8) (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jan 17 05:16:16 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Automatic Timers not supported

SMART Automatic Offline Testing Enabled every four hours.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   000   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       593
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       41
148 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
149 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       5
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       8
170 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       9
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       65541
181 Program_Fail_Cnt_Total  0x0032   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       8
194 Temperature_Celsius     0x0022   075   067   000    Old_age   Always       -       25 (Min/Max 18/33)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       5
218 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       2035
231 Temperature_Celsius     0x0000   001   001   000    Old_age   Offline      -       99
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       174
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       158
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       341
244 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       5
246 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       9756

SMART Error Log Version: 1
ATA Error Count: 1892 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1892 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 08 e8 05 6d e7  Error: ICRC, ABRT at LBA = 0x076d05e8 = 124585448

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 e8 05 6d e7 08      00:00:00.000  WRITE DMA
  ca 00 08 c8 05 6d e7 08      00:00:00.000  WRITE DMA
  ca 00 08 a8 05 6d e7 08      00:00:00.000  WRITE DMA
  ca 00 08 88 05 6d e7 08      00:00:00.000  WRITE DMA
  ca 00 08 60 05 6d e7 08      00:00:00.000  WRITE DMA

Error 1891 occurred at disk power-on lifetime: 23 hours (0 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 30 b0 94 3c e9  Error: ICRC, ABRT at LBA = 0x093c94b0 = 154965168

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 30 b0 94 3c e9 08      00:00:00.000  WRITE DMA
  35 00 00 b0 c1 3b e0 08      00:00:00.000  WRITE DMA EXT
  ca 00 38 58 2d 39 e8 08      00:00:00.000  WRITE DMA
  35 00 c0 f0 bc 3b e0 08      00:00:00.000  WRITE DMA EXT
  35 00 f0 00 b8 3b e0 08      00:00:00.000  WRITE DMA EXT

Error 1890 occurred at disk power-on lifetime: 22 hours (0 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 10 80 49 1f ea  Error: ICRC, ABRT at LBA = 0x0a1f4980 = 169822592

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 10 80 49 1f ea 08      00:00:00.000  WRITE DMA
  ca 00 08 70 49 1f ea 08      00:00:00.000  WRITE DMA
  ca 00 08 60 49 1f ea 08      00:00:00.000  WRITE DMA
  ca 00 08 38 49 1f ea 08      00:00:00.000  WRITE DMA
  ca 00 18 18 49 1f ea 08      00:00:00.000  WRITE DMA

Error 1889 occurred at disk power-on lifetime: 20 hours (0 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 a0 10 ba 35 e9  Error: ICRC, ABRT at LBA = 0x0935ba10 = 154515984

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 a0 10 ba 35 e9 08      00:00:00.000  WRITE DMA
  c8 00 90 30 e5 77 ea 08      00:00:00.000  READ DMA
  c8 00 80 b0 e4 77 ea 08      00:00:00.000  READ DMA
  c8 00 40 70 e4 77 ea 08      00:00:00.000  READ DMA
  c8 00 20 50 e4 77 ea 08      00:00:00.000  READ DMA

Error 1888 occurred at disk power-on lifetime: 3 hours (0 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 68 c0 a9 31 e9  Error: ICRC, ABRT at LBA = 0x0931a9c0 = 154249664

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 68 c0 a9 31 e9 08      00:00:00.000  WRITE DMA
  ca 00 08 00 a9 38 e8 08      00:00:00.000  WRITE DMA
  ca 00 08 c0 b5 2a e8 08      00:00:00.000  WRITE DMA
  ca 00 08 e8 95 29 e8 08      00:00:00.000  WRITE DMA
  ca 00 08 c8 93 29 e8 08      00:00:00.000  WRITE DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SSD acheté en mai, mais déballé en décembre pour l'installer sad  Je vais donc réclamer si vous confirmez qu'il est défaillant.
Éventuellement auriez-vous un autre de capacité equivalente à me conseiller ? Et si je peux cloner, à la place de tous réinstaller ? (Win7 + Ubuntu 18)

Dernière modification par leborgne (Le 17/01/2019, à 05:18)

Hors ligne

#12 Le 17/01/2019, à 06:15

malbo

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour,
Dans le résultat SMART du post #7, on peut voir qu'il y avait 1885 erreurs :

ATA Error Count: 1885 (device log contains only the most recent five errors)

Dans le résultat du post #11, après démarrage sur le noyau 4.15.0-43, on peut voir qu'il y avait 1892 erreurs :

ATA Error Count: 1892 (device log contains only the most recent five errors)

Dans le résultat du post #11, après démarrage sur le noyau 4.15.0-42, on peut voir qu'il y avait toujours 1892 erreurs :

ATA Error Count: 1892 (device log contains only the most recent five errors)

On pourrait penser que c'est le noyau 4.15.0-43 qui génère ces erreurs. Mais je ne pense pas qu'on puisse tirer des conclusions avec si peu d'éléments.

Hors ligne

#13 Le 17/01/2019, à 06:20

moko138

Re : [Résolu SSD neuf HS] Problème démarrage

leborgne a écrit :

pour les nouvelles :

Le disque est sain

Dis-nous la source, qu'on en ricane !

= =

Ça s'est aggravé... On avait :

  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       554
173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       65541
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       4
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       166

ATA Error Count: 1885

39 heures plus tard nous voyons :

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       593
173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       65541
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       5
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       174

ATA Error Count: 1892

Et pour les 5 derniers LBA défectueux répertoriés,
ils étaient concentrés       entre 124.500.000  et  124.600.000
  Maintenant ils s'étagent entre 124.585.448  et  169.822.592 :

Error 1892 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
                           ICRC, ABRT at LBA = 0x076d05e8 = 124585448
(...)

Error 1891 occurred at (...) ICRC, ABRT at LBA = 0x093c94b0 = 154965168
(...)

Error 1890 occurred at (...) ICRC, ABRT at LBA = 0x0a1f4980 = 169822592
(...)

Error 1889 occurred at (...) ICRC, ABRT at LBA = 0x0935ba10 = 154515984
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 a0 10 ba 35 e9 08      00:00:00.000  WRITE DMA
  c8 00 90 30 e5 77 ea 08      00:00:00.000  READ DMA
  c8 00 80 b0 e4 77 ea 08      00:00:00.000  READ DMA
  c8 00 40 70 e4 77 ea 08      00:00:00.000  READ DMA
  c8 00 20 50 e4 77 ea 08      00:00:00.000  READ DMA

Error 1888 occurred at (...) ICRC, ABRT at LBA = 0x0931a9c0 = 154249664

Quant à l'heure des dernières erreurs dans l'ordre chronologique :

Error 1892 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
Error 1891 occurred at disk power-on lifetime: 23 hours (0 days + 23 hours)

Comme l'erreur 1891 s'est produite après la dernière erreur répertoriée à 554 heures, qui était
l'erreur 1885, on voit que le micrologiciel du SSD considère qu'un âge de 23 heures, est plus vieux qu'un âge de 554 heures !
D'autres fois le micrologiciel se déclare incapable d'utiliser son horloge : 

0 hours (0 days + 0 hours)

Bref, tu es tombé sur une série

smartmontools a écrit :
Serial Number:    50026B76820BE14F
Firmware Version: SBFK71E0

dont le micrologiciel (au moins) est défectueux.
  Et sur un exemplaire dont les secteurs médians sont de plus en plus nombreux à être déclarés sources d'erreurs.


Donc ce SSD n'est pas fiable. Et un jour prochain, son micrologiciel défectueux va décréter, sur la base de données (l'âge et le nombre d'erreurs répertoriées) erronées, qu'il n'a plus que quelques Mo utilisables et en conséquence se déclarer HS et se bloquer pour de bon !


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#14 Le 17/01/2019, à 07:43

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

Merci, bon, ben je file faire une nouvelle sauvegarde ! Lol !

Je peux cloner de disque, ou mieux vaut réinstaller ?

moko138 a écrit :
leborgne a écrit :

pour les nouvelles :

Le disque est sain

Dis-nous la source, qu'on en ricane !

1547705205-disque-120.png

Hors ligne

#15 Le 17/01/2019, à 08:31

malbo

Re : [Résolu SSD neuf HS] Problème démarrage

Cloner, c'est possible en général mais il y a toujours des manips à faire en plus pour que ça démarre correctement. De plus cloner un disque vérolé, c'est quand même pas une grande idée. Moi, je te recommande d'installer un Ubuntu tout neuf et tout propre.

Dernière modification par malbo (Le 17/01/2019, à 08:32)

Hors ligne

#16 Le 18/01/2019, à 02:48

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

D'accord ;-)

Merci bien à vous deux !

Hors ligne

#17 Le 18/01/2019, à 03:16

moko138

Re : [Résolu SSD neuf HS] Problème démarrage

malbo a écrit :

cloner un disque vérolé, c'est quand même pas une grande idée.

+1

Et une fois de plus, c'est "Disques" qui annonce "sain" :
http://image.noelshack.com/minis/2019/0 … ue-120.png
un disque défectueux.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#18 Le 21/01/2019, à 12:37

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour,

De pire en pire, j'ai acheté un autre SSD (Crucial cette fois) et installé Win7 + Ubuntu. Le PC démarre directement sur Win7, Grub n’apparaît pas :-o Pourtant les partitions sont bien présentes.
J'ai ré-téléchargé et gravé Ubuntu pour le réinstaller, mais toujours pareil. J'ai donc réinstallé Win7 + Ubuntu , et le PC démarre toujours directement sur Win7 sans apparition de Grub.

La seule avancé, est que le nouveau SSD a une température de 37 - 41° Et non 99° comme le premier

Dernière modification par leborgne (Le 21/01/2019, à 12:41)

Hors ligne

#19 Le 21/01/2019, à 13:02

malbo

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour,
Je te prie de démarrer sur un support Live (LiveUSB ou LiveDVD) de Ubuntu 18.04.1 64 bits avec le choix "Essayer Ubuntu..." (ou "Try Ubuntu..." si c'est en anglais) et de faire un Boot-info depuis la session Live. Tu donneras l'URL de ce Boot-Info dans ta réponse.

Hors ligne

#20 Le 21/01/2019, à 17:25

moko138

Re : [Résolu SSD neuf HS] Problème démarrage

leborgne a écrit :

le nouveau SSD a une température de 37 - 41° Et non 99° comme le premier

Ne confondons pas !
https://en.wikipedia.org/wiki/S.M.A.R.T.  explique :

231     Life Left (SSDs)
or Temperature :
  Indicates the approximate SSD life left,
[pourcentage estimé de solde de longévité] in terms of program/erase cycles or available reserved blocks.
A normalized value of 100 represents a new drive, with a threshold value at 10 indicating a need for replacement.
A value of 0 may mean that the drive is operating in read-only mode to allow data recovery.

- -

Previously (pre-2010) occasionally used for Drive Temperature (more typically reported at 0xC2).
Antérieurement, [231] était parfois utilisé pour la température du disque...

Donc

231  (...)  99

indiquait un disque quasi neuf ;
     et les températures étaient en 194 :

194 Temperature_Celsius  (...)  25 (Min/Max 18/33)

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#21 Le 21/01/2019, à 17:54

ubuntu18a

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour
J'aimerais savoir avec quoi sont reliés  tes SSD  à la carte mère
Revérifie tous ces branchements (faux-contact?)

Les erreurs ICRC sont typiques de pertes données pendant les transferts d'informations  Si les câbles sont excellents, ce sont peut-être les ports de la carte mère qui sont défaillants (ou l'entée du SSD)

https://www.revolvy.com/page/Cyclic-redundancy-check a écrit :

Les CRC sont appelés ainsi parce que la valeur de contrôle (vérification des données) est une redondance (elle développe le message sans ajouter d'informations) et que l'algorithme est basé sur des codes cycliques. Les CRC sont populaires parce qu'ils sont simples à implémenter dans du matériel binaire, faciles à analyser de manière mathématique et particulièrement efficaces pour détecter les erreurs courantes causées par le bruit dans les canaux de transmission. Comme la valeur de contrôle a une longueur fixe, la fonction qui le génère est parfois utilisée comme fonction de hachage.

Dernière modification par ubuntu18a (Le 21/01/2019, à 17:58)

Hors ligne

#22 Le 23/01/2019, à 09:19

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

Bonjour à vous trois, et merci.

Ci-dessous le boot-info (oublié après toutes ces péripéties) et son adresse si besoin : http://paste.ubuntu.com/p/b2KmrccPhJ/

Pour les températures, c'est une comparaison des deux SSD avec les données de l'utilitaire "Disques"

Les SSD son branchés sur la carte mère avec un câble SATA rouge + l'alimentation classique. Je les branche alternativement dessus, et ils gardent leurs problèmes respectifs après changements. KINGSTON démarre plus ou moins bien sur Ubuntu, CRUCIAL démarre sur Win7 sans afficher Grub. Je ferai l'essai de changer le câble SATA.

Supprimé, voir post suivant ;-) 

Dernière modification par leborgne (Le 23/01/2019, à 09:39)

Hors ligne

#23 Le 23/01/2019, à 09:29

malbo

Re : [Résolu SSD neuf HS] Problème démarrage

Merci.
C'est pour ça que j'avais demandé l'URL du Boot-Info parce que ce que tu as collé dans ton post n'est pas agréable. Je préfère ça pour ton Boot-Info ( http://paste.ubuntu.com/p/b2KmrccPhJ/ ) :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for /boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk search_fs_uuid
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    search.fs_uuid e547face-7423-4a33-95c0-6485c3599eea root hd1,msdos5 
    set prefix=($root)'/boot/grub'
    
    ---------------------------------------------------------------------------
 => Windows 7/8/2012 is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Unknown
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sdb2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /Windows/System32/winload.exe

sdb3: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 149.1 GiB, 160041885696 bytes, 312581808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   312,580,095   312,578,048   7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,048       718,847       716,800   7 NTFS / exFAT / HPFS
/dev/sdb2             718,848   157,745,382   157,026,535   7 NTFS / exFAT / HPFS
/dev/sdb3         157,747,198   488,396,799   330,649,602   5 Extended
/dev/sdb5         157,747,200   488,396,799   330,649,600  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/sda1        4719FC23449F66C6                       ntfs       Sauvgarde
/dev/sdb1        20EC3659EC362984                       ntfs       Réservé au système
/dev/sdb2        5C6A3AF26A3AC892                       ntfs       
/dev/sdb5        e547face-7423-4a33-95c0-6485c3599eea   ext4       
/dev/sr0         2018-07-25-03-21-56-00                 iso9660    Ubuntu 18.04.1 LTS amd64

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan 23 07:56 ata-CT250MX500SSD1_1850E1DCC408 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 23 07:56 ata-CT250MX500SSD1_1850E1DCC408-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 23 07:56 ata-CT250MX500SSD1_1850E1DCC408-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 23 07:56 ata-CT250MX500SSD1_1850E1DCC408-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jan 23 07:56 ata-CT250MX500SSD1_1850E1DCC408-part5 -> ../../sdb5
lrwxrwxrwx 1 root root  9 Jan 23 07:43 ata-Optiarc_DVD_RW_AD-7200S -> ../../sr0
lrwxrwxrwx 1 root root  9 Jan 23 07:56 ata-WDC_WD1600AVVS-62L2B0_WD-WCAUZ3065161 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 23 07:56 ata-WDC_WD1600AVVS-62L2B0_WD-WCAUZ3065161-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Jan 23 07:56 wwn-0x50014ee15995169f -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 23 07:56 wwn-0x50014ee15995169f-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Jan 23 07:56 wwn-0x500a0751e1dcc408 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 23 07:56 wwn-0x500a0751e1dcc408-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 23 07:56 wwn-0x500a0751e1dcc408-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 23 07:56 wwn-0x500a0751e1dcc408-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jan 23 07:56 wwn-0x500a0751e1dcc408-part5 -> ../../sdb5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sr0         /cdrom                   iso9660    (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)


=========================== sdb5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  e547face-7423-4a33-95c0-6485c3599eea
else
  search --no-floppy --fs-uuid --set=root e547face-7423-4a33-95c0-6485c3599eea
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e547face-7423-4a33-95c0-6485c3599eea' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  e547face-7423-4a33-95c0-6485c3599eea
	else
	  search --no-floppy --fs-uuid --set=root e547face-7423-4a33-95c0-6485c3599eea
	fi
        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=e547face-7423-4a33-95c0-6485c3599eea ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-29-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-e547face-7423-4a33-95c0-6485c3599eea' {
	menuentry 'Ubuntu, avec Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-e547face-7423-4a33-95c0-6485c3599eea' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  e547face-7423-4a33-95c0-6485c3599eea
		else
		  search --no-floppy --fs-uuid --set=root e547face-7423-4a33-95c0-6485c3599eea
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=e547face-7423-4a33-95c0-6485c3599eea ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-e547face-7423-4a33-95c0-6485c3599eea' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  e547face-7423-4a33-95c0-6485c3599eea
		else
		  search --no-floppy --fs-uuid --set=root e547face-7423-4a33-95c0-6485c3599eea
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=e547face-7423-4a33-95c0-6485c3599eea ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  e547face-7423-4a33-95c0-6485c3599eea
	else
	  search --no-floppy --fs-uuid --set=root e547face-7423-4a33-95c0-6485c3599eea
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos5 --hint-efi=hd1,msdos5 --hint-baremetal=ahci1,msdos5  e547face-7423-4a33-95c0-6485c3599eea
	else
	  search --no-floppy --fs-uuid --set=root e547face-7423-4a33-95c0-6485c3599eea
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (sur /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-chain-20EC3659EC362984' {
	insmod part_msdos
	insmod ntfs
	set root='hd1,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  20EC3659EC362984
	else
	  search --no-floppy --fs-uuid --set=root 20EC3659EC362984
	fi
	parttool ${root} hidden-
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb5 during installation
UUID=e547face-7423-4a33-95c0-6485c3599eea /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
--------------------------------------------------------------------------------

=================== sdb5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 149.363182068 = 160.377495552  boot/grub/grub.cfg                             2
 149.363166809 = 160.377479168  boot/grub/i386-pc/core.img                     1
 149.360576630 = 160.374697984  boot/vmlinuz-4.15.0-29-generic                 1
 149.360576630 = 160.374697984  vmlinuz                                        1
 219.691833496 = 235.892310016  boot/initrd.img-4.15.0-29-generic              3
 219.691833496 = 235.892310016  initrd.img                                     3
 219.691833496 = 235.892310016  initrd.img.old                                 3

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda1

00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 8f a1 12 00 00 00 00  |................|
00000030  04 00 00 00 00 00 00 00  ff 18 2a 01 00 00 00 00  |..........*.....|
00000040  f6 00 00 00 01 00 00 00  c6 66 9f 44 23 fc 19 47  |.........f.D#..G|
00000050  00 00 00 00 0e 1f be 71  7c ac 22 c0 74 0b 56 b4  |.......q|.".t.V.|
00000060  0e bb 07 00 cd 10 5e eb  f0 32 e4 cd 16 cd 19 eb  |......^..2......|
00000070  fe 54 68 69 73 20 69 73  20 6e 6f 74 20 61 20 62  |.This is not a b|
00000080  6f 6f 74 61 62 6c 65 20  64 69 73 6b 2e 20 50 6c  |ootable disk. Pl|
00000090  65 61 73 65 20 69 6e 73  65 72 74 20 61 20 62 6f  |ease insert a bo|
000000a0  6f 74 61 62 6c 65 20 66  6c 6f 70 70 79 20 61 6e  |otable floppy an|
000000b0  64 0d 0a 70 72 65 73 73  20 61 6e 79 20 6b 65 79  |d..press any key|
000000c0  20 74 6f 20 74 72 79 20  61 67 61 69 6e 20 2e 2e  | to try again ..|
000000d0  2e 20 0d 0a 00 00 00 00  00 00 00 00 00 00 00 00  |. ..............|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

Unknown BootLoader on sdb3

00000000  7f 97 ee f5 34 b5 b2 ba  01 76 56 6b 9c 12 f5 48  |....4....vVk...H|
00000010  b8 10 ce b4 ef 50 04 43  29 ea 44 e1 06 01 01 1c  |.....P.C).D.....|
00000020  0d 1a 1a 47 c3 3e 4a 79  6a f3 a7 08 41 a6 18 73  |...G.>Jyj...A..s|
00000030  7c e2 9c be 75 01 bd 4a  d4 9b a9 b7 e0 b3 e3 12  ||...u..J........|
00000040  a5 99 be 2c 83 46 8e a3  ef fa bc ac 35 d4 e3 a4  |...,.F......5...|
00000050  d4 03 67 c7 af 81 2d 52  98 4e 94 41 b8 56 c3 de  |..g...-R.N.A.V..|
00000060  dd 74 ff fb b3 3d d0 7b  56 a6 8b 1d 49 36 27 66  |.t...=.{V...I6'f|
00000070  ab 7c 2c 20 4b 7f 18 29  ab 76 47 79 31 1b 16 96  |.|, K..).vGy1...|
00000080  bd 94 5a 08 14 3c b9 bf  34 4a e2 7f 6d eb a4 e5  |..Z..<..4J..m...|
00000090  69 a9 8d 9f 22 83 ef 8b  cc b1 d3 05 88 82 3b ea  |i...".........;.|
000000a0  64 51 08 07 93 4c 51 52  15 b1 61 fb f9 7a 6c 3f  |dQ...LQR..a..zl?|
000000b0  e4 5d be d0 56 b6 2f 54  e1 02 8e f1 6b 49 8a 2c  |.]..V./T....kI.,|
000000c0  5d 5a fe 55 61 f6 a5 c5  a8 0f 21 c6 35 6c c4 09  |]Z.Ua.....!.5l..|
000000d0  d2 ad 5e f3 eb 99 28 4b  4e 0d d9 61 6d 25 d0 e8  |..^...(KN..am%..|
000000e0  5f 64 b2 e1 e1 ea e0 86  84 29 6a 4f ee a0 e4 9b  |_d.......)jO....|
000000f0  e2 b7 20 d6 f2 d1 96 b1  1d 6f 0e 2a e8 f4 ec c7  |.. ......o.*....|
00000100  27 bf d9 bf 56 3e 1f 5f  f5 cf f0 07 ab de 45 f1  |'...V>._......E.|
00000110  0a 7b dc 36 c9 dd d9 ad  25 91 08 38 85 0b 50 2d  |.{.6....%..8..P-|
00000120  26 d9 a4 45 3c 57 64 bf  6a f2 68 de 7b 3d 0a 1a  |&..E<Wd.j.h.{=..|
00000130  28 16 08 5a 48 50 27 51  98 ab 1b 3e 7a ef 99 e4  |(..ZHP'Q...>z...|
00000140  4d 41 66 9d 50 08 ee fb  e1 c3 10 56 ce 8b 89 ee  |MAf.P......V....|
00000150  d3 48 26 98 31 76 00 6a  f6 a8 af 8c 5f 60 a5 e4  |.H&.1v.j...._`..|
00000160  a9 84 f6 dd 2d f3 9d b0  a1 fc a3 e3 33 13 04 11  |....-.......3...|
00000170  38 60 3a ab 4e 44 71 54  59 48 41 8b 55 70 e5 30  |8`:.NDqTYHA.Up.0|
00000180  09 73 74 c8 22 7c 9a 24  e7 ab 5e 58 3b 37 c0 1e  |.st."|.$..^X;7..|
00000190  d5 cf 06 3d 64 40 69 d4  d6 13 52 05 48 cf 94 e9  |...=d@i...R.H...|
000001a0  a6 2c 9c 80 2a 91 23 fb  12 be 22 89 b7 a5 24 1a  |.,..*.#..."...$.|
000001b0  27 24 2b 14 6b b3 5d e9  ae 51 fb 47 0d 8a 00 be  |'$+.k.]..Q.G....|
000001c0  d2 ff 83 be d2 ff 02 00  00 00 00 50 b5 13 00 00  |...........P....|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/7594/mountinfo) leaked on lvs invocation. Parent PID 17510: bash
File descriptor 63 (pipe:[105938]) leaked on lvs invocation. Parent PID 17510: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20190123_0756 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
Partition 3 does not start on physical sector boundary.
boot-info is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type

=================== os-prober:
/dev/sdb1:Windows 7:Windows:chain
/dev/sdb5:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/sda1: LABEL="Sauvgarde" UUID="4719FC23449F66C6" TYPE="ntfs" PTTYPE="dos" PARTUUID="9853c965-01"
/dev/sdb1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="20EC3659EC362984" TYPE="ntfs" PARTUUID="85f5dcbc-01"
/dev/sdb2: UUID="5C6A3AF26A3AC892" TYPE="ntfs" PARTUUID="85f5dcbc-02"
/dev/sdb5: UUID="e547face-7423-4a33-95c0-6485c3599eea" TYPE="ext4" PARTUUID="85f5dcbc-05"
/dev/sr0: UUID="2018-07-25-03-21-56-00" LABEL="Ubuntu 18.04.1 LTS amd64" TYPE="iso9660" PTUUID="663eb4c4" PTTYPE="dos"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sdb2.
Partition 3 does not start on physical sector boundary.
Partition 3 does not start on physical sector boundary.

=================== sdb5/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 juil. 25 03:08 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 17  2018 00_header
-rwxr-xr-x 1 root root  6258 juil. 16  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17  2018 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 17  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 17  2018 40_custom
-rwxr-xr-x 1 root root   216 juil. 17  2018 41_custom
-rw-r--r-- 1 root root   483 juil. 17  2018 README




=================== sdb5/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda1.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdb1.
sdb2	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdb2.
sdb5	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdb5.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, no-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:160GB:scsi:512:512:msdos:ATA WDC WD1600AVVS-6:;
1:1049kB:160GB:160GB:ntfs::boot;

BYT;
/dev/sdb:250GB:scsi:512:4096:msdos:ATA CT250MX500SSD1:;
1:1049kB:368MB:367MB:ntfs::boot;
2:368MB:80.8GB:80.4GB:ntfs::;
3:80.8GB:250GB:169GB:::;
5:80.8GB:250GB:169GB:ext4::;

BYT;
/dev/sr0:1953MB:scsi:2048:2048:mac:Optiarc DVD RW AD-7200S:;
1:2048B:6143B:4096B::Apple:;
2:1913MB:1916MB:2392kB::EFI:;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
fd0   disk              4K
loop0 loop squashfs   1,8G
loop1 loop squashfs  86,9M
loop2 loop squashfs  34,7M
loop3 loop squashfs 140,9M
loop4 loop squashfs   2,3M
loop5 loop squashfs    13M
loop6 loop squashfs  14,5M
loop7 loop squashfs   3,7M
sda   disk          149,1G
sda1  part ntfs     149,1G Sauvgarde
sdb   disk          232,9G
sdb1  part ntfs       350M Réservé au système
sdb2  part ntfs      74,9G
sdb3  part              1K
sdb5  part ext4     157,7G
sr0   rom  iso9660    1,8G Ubuntu 18.04.1 LTS amd64

KNAME ROTA RO RM STATE   MOUNTPOINT
fd0      1  0  1
loop0    1  1  0         /rofs
loop1    1  1  0         /snap/core/4917
loop2    1  1  0         /snap/gtk-common-themes/319
loop3    1  1  0         /snap/gnome-3-26-1604/70
loop4    1  1  0         /snap/gnome-calculator/180
loop5    1  1  0         /snap/gnome-characters/103
loop6    1  1  0         /snap/gnome-logs/37
loop7    1  1  0         /snap/gnome-system-monitor/51
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sdb      0  0  0 running
sdb1     0  0  0         /mnt/boot-sav/sdb1
sdb2     0  0  0         /mnt/boot-sav/sdb2
sdb3     0  0  0
sdb5     0  0  0         /mnt/boot-sav/sdb5
sr0      1  0  1 running /cdrom


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4062808k,nr_inodes=1015702,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=816796k,mode=755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14749)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=816792k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb5 on /mnt/boot-sav/sdb5 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/fd0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 sdb5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd fd0 full fuse fw0 hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb3 sdb5 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 8f a1 12 00 00 00 00  |................|
00000030  04 00 00 00 00 00 00 00  ff 18 2a 01 00 00 00 00  |..........*.....|
00000040  f6 00 00 00 01 00 00 00  c6 66 9f 44 23 fc 19 47  |.........f.D#..G|
00000050  00 00 00 00 0e 1f be 71  7c ac 22 c0 74 0b 56 b4  |.......q|.".t.V.|
00000060  0e bb 07 00 cd 10 5e eb  f0 32 e4 cd 16 cd 19 eb  |......^..2......|
00000070  fe 54 68 69 73 20 69 73  20 6e 6f 74 20 61 20 62  |.This is not a b|
00000080  6f 6f 74 61 62 6c 65 20  64 69 73 6b 2e 20 50 6c  |ootable disk. Pl|
00000090  65 61 73 65 20 69 6e 73  65 72 74 20 61 20 62 6f  |ease insert a bo|
000000a0  6f 74 61 62 6c 65 20 66  6c 6f 70 70 79 20 61 6e  |otable floppy an|
000000b0  64 0d 0a 70 72 65 73 73  20 61 6e 79 20 6b 65 79  |d..press any key|
000000c0  20 74 6f 20 74 72 79 20  61 67 61 69 6e 20 2e 2e  | to try again ..|
000000d0  2e 20 0d 0a 00 00 00 00  00 00 00 00 00 00 00 00  |. ..............|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  12 00 bf 00 00 08 00 00  |................|
00000020  00 00 00 00 80 00 80 00  ff ef 0a 00 00 00 00 00  |................|
00000030  aa 74 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |.t..............|
00000040  f6 00 00 00 01 00 00 00  84 29 36 ec 59 36 ec 20  |.........)6.Y6. |
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sdb2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  12 00 bf 00 00 f8 0a 00  |................|
00000020  00 00 00 00 80 00 80 00  e0 08 5c 09 00 00 00 00  |...............|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  92 c8 3a 6a f2 3a 6a 5c  |..........:j.:j|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 45 72  |t.............Er|
00000190  72 65 75 72 20 6c 65 63  74 75 72 65 20 64 69 73  |reur lecture dis|
000001a0  71 75 65 00 0d 0a 42 4f  4f 54 4d 47 52 20 61 62  |que...BOOTMGR ab|
000001b0  73 65 6e 74 00 0d 0a 42  4f 4f 54 4d 47 52 20 63  |sent...BOOTMGR c|
000001c0  6f 6d 70 72 65 73 73 82  00 0d 0a 43 74 72 6c 2b  |ompress....Ctrl+|
000001d0  41 6c 74 2b 53 75 70 70  72 20 70 6f 75 72 20 72  |Alt+Suppr pour r|
000001e0  65 64 82 6d 61 72 72 65  72 0d 0a 00 6f 20 72 65  |ed.marrer...o re|
000001f0  73 74 61 72 74 0d 0a 00  8c a4 b5 c9 00 00 55 aa  |start.........U.|
00000200
Partition 3 does not start on physical sector boundary.

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     798M  1.6M  797M   1% /run
/dev/sr0       iso9660   1.9G  1.9G     0 100% /cdrom
/dev/loop0     squashfs  1.8G  1.8G     0 100% /rofs
/cow           overlay   3.9G  447M  3.5G  12% /
tmpfs          tmpfs     3.9G   40M  3.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     3.9G  520K  3.9G   1% /tmp
tmpfs          tmpfs     798M   56K  798M   1% /run/user/999
/dev/loop1     squashfs   87M   87M     0 100% /snap/core/4917
/dev/loop2     squashfs   35M   35M     0 100% /snap/gtk-common-themes/319
/dev/loop3     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/70
/dev/loop4     squashfs  2.4M  2.4M     0 100% /snap/gnome-calculator/180
/dev/loop5     squashfs   13M   13M     0 100% /snap/gnome-characters/103
/dev/loop6     squashfs   15M   15M     0 100% /snap/gnome-logs/37
/dev/loop7     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/51
/dev/sda1      fuseblk   150G   46G  104G  31% /mnt/boot-sav/sda1
/dev/sdb1      fuseblk   350M   39M  312M  11% /mnt/boot-sav/sdb1
/dev/sdb2      fuseblk    75G   15G   61G  20% /mnt/boot-sav/sdb2
/dev/sdb5      ext4      155G  6.3G  141G   5% /mnt/boot-sav/sdb5

=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1864450048 bytes, 3641504 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 149.1 GiB, 160041885696 bytes, 312581808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x9853c965

Device     Boot Start       End   Sectors   Size Id Type
/dev/sda1  *     2048 312580095 312578048 149.1G  7 HPFS/NTFS/exFAT


Disk /dev/sdb: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x85f5dcbc

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sdb1  *         2048    718847    716800   350M  7 HPFS/NTFS/exFAT
/dev/sdb2          718848 157745382 157026535  74.9G  7 HPFS/NTFS/exFAT
/dev/sdb3       157747198 488396799 330649602 157.7G  5 Extended
/dev/sdb5       157747200 488396799 330649600 157.7G 83 Linux




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sdb5 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sdb (ATA CT250MX500SSD1) !

Les fichiers de démarrage de [Ubuntu 18.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Tout au début du Boot-Info, on peut voir :

============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda 

Donc le chargeur d'amorçage de Grub se trouve sur le disque dur sda. Pour pouvoir obtenir le démarrage par défaut de l'ordi sur le menu Grub, il faut que tu modifies la priorité de démarrage dans le Bios de ton ordi pour mettre le disque WD1600AVVS (*) en priorité (au llieu de CT250MX500SSD1 qui s'y trouve actuellemeent)

(*) c'est le disque qui correspond à sda comme tu peux voir dans cet extrait :

=================== parted -lm:

BYT;
/dev/sda:160GB:scsi:512:512:msdos:ATA WDC WD1600AVVS-6:;
1:1049kB:160GB:160GB:ntfs::boot;

Dernière modification par malbo (Le 23/01/2019, à 09:46)

Hors ligne

#24 Le 23/01/2019, à 09:33

leborgne

Re : [Résolu SSD neuf HS] Problème démarrage

Et voici le test du disque, sauf que je vois WD, c'est mon ancien HDD branché en SATA3 qui me sert a présent pour transférer mes sauvegardes. Je le poste quand même.

sudo smartctl -s on -o on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital AV-GP
Device Model:     WDC WD1600AVVS-62L2B0
Serial Number:    WD-WCAUZ3065161
LU WWN Device Id: 5 0014ee 15995169f
Firmware Version: 01.03A01
User Capacity:    160041885696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.5, 3.0 Gb/s
Local Time is:    Wed Jan 23 08:25:18 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Automatic Offline Testing Enabled every four hours.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 4200) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  52) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3037)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   158   156   021    Pre-fail  Always       -       3058
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       959
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   092   092   000    Old_age   Always       -       6054
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       954
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       47
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       959
194 Temperature_Celsius     0x0022   112   099   000    Old_age   Always       -       31
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Bon, au pif j'ai mis un "b" et voilà mon SSD CRUCIAL :-)

 sudo smartctl -s on -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     CT250MX500SSD1
Serial Number:    1850E1DCC408
LU WWN Device Id: 5 00a075 1e1dcc408
Firmware Version: M3CR023
User Capacity:    250059350016 bytes [250 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA >3.2 (0x1ff), 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Jan 23 08:46:03 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x0031)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   000    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   010    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       4
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       10
171 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1
174 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033   000   000   000    Pre-fail  Always       -       21
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   066   058   000    Old_age   Always       -       34 (Min/Max 0/42)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       1
202 Unknown_SSD_Attribute   0x0030   100   100   001    Old_age   Offline      -       0
206 Unknown_SSD_Attribute   0x000e   100   100   000    Old_age   Always       -       0
210 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
246 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       238173088
247 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       4018893
248 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1622342

Read SMART Error Log failed: scsi error badly formed scsi parameters

Read SMART Self-test Log failed: scsi error badly formed scsi parameters

Read SMART Selective Self-test Log failed: scsi error badly formed scsi parameters

Dernière modification par leborgne (Le 23/01/2019, à 09:51)

Hors ligne

#25 Le 23/01/2019, à 09:44

malbo

Re : [Résolu SSD neuf HS] Problème démarrage

J'ai complété mon post #23 entre-temps pour te donner la solution.

Hors ligne