Contenu | Rechercher | Menus

Annonce

Ubuntu Party les 18 et 19 mai 2019 à Paris
Grand rendez-vous tout public organisé par Ubuntu-FR, avec install-party, ateliers et conférences.
Venez y (re)découvrir ou faire découvrir le Libre et Ubuntu !

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 11/03/2019, à 23:22

fgi

[Résolu]Temps de démarrage 18.04

Bonjour,

Je suis passé d'une 16.04 à une 18.04, et je la trouve bien longue à démarrer. Pourriez vous SVP me donner quelques pistes ?
Voici mon dmesg.
Il y a quand même beaucoup de temps passé tout à la fin, séquence que je ne comprends pas, et peut-être aussi d'autres choses qui m'ont échappées.

Merci !

[    0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02
[    0.000000] Linux version 4.15.0-46-generic (buildd@lgw01-amd64-038) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #49-Ubuntu SMP Wed Feb 6 09:33:07 UTC 2019 (Ubuntu 4.15.0-46.49-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=f538e051-6ccc-4731-b628-1ee10a1d0953 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd28efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd28f000-0x00000000bd295fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd296000-0x00000000bdd3bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdd3c000-0x00000000be233fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be234000-0x00000000d7c5dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7c5e000-0x00000000d7cb3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d7cb4000-0x00000000d7d19fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7d1a000-0x00000000d7e56fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d7e57000-0x00000000d9f47fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d9f48000-0x00000000d9ffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xd7e1c000  ACPI=0xd7e1c000  SMBIOS=0xf04c0  MPS=0xfd440 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z97P-D3/Z97P-D3, BIOS F7 04/22/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00DC000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 00DB000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 8110M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1fa13f000, 0x1fa13ffff] PGTABLE
[    0.000000] BRK [0x1fa140000, 0x1fa140fff] PGTABLE
[    0.000000] BRK [0x1fa141000, 0x1fa141fff] PGTABLE
[    0.000000] BRK [0x1fa142000, 0x1fa142fff] PGTABLE
[    0.000000] BRK [0x1fa143000, 0x1fa143fff] PGTABLE
[    0.000000] BRK [0x1fa144000, 0x1fa144fff] PGTABLE
[    0.000000] BRK [0x1fa145000, 0x1fa145fff] PGTABLE
[    0.000000] BRK [0x1fa146000, 0x1fa146fff] PGTABLE
[    0.000000] BRK [0x1fa147000, 0x1fa147fff] PGTABLE
[    0.000000] BRK [0x1fa148000, 0x1fa148fff] PGTABLE
[    0.000000] BRK [0x1fa149000, 0x1fa149fff] PGTABLE
[    0.000000] BRK [0x1fa14a000, 0x1fa14afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337d3000-0x35be0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000D7E1C000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D7E1C080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D7E2C9A8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D7E1C190 010818 (v02 ALASKA A M I    00000088 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000D7E55080 000040
[    0.000000] ACPI: APIC 0x00000000D7E2CAB8 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000D7E2CB20 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000D7E2CB68 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000D7E2D758 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D7E2DC98 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 0x00000000D7E2E810 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000D7E2E850 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D7E2E888 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000D7E2EBF8 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: BGRT 0x00000000D7E34758 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21fdd5000-0x21fdfffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bd28efff]
[    0.000000]   node   0: [mem 0x00000000bd296000-0x00000000bdd3bfff]
[    0.000000]   node   0: [mem 0x00000000be234000-0x00000000d7c5dfff]
[    0.000000]   node   0: [mem 0x00000000d7cb4000-0x00000000d7d19fff]
[    0.000000]   node   0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.000000] Reserved but unavailable: 34973 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.000000] On node 0 totalpages: 2061667
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 25 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13728 pages used for memmap
[    0.000000]   DMA32 zone: 878534 pages, LIFO batch:31
[    0.000000]   Normal zone: 18424 pages used for memmap
[    0.000000]   Normal zone: 1179136 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000db200000-0x00000000df1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd28f000-0xbd295fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdd3c000-0xbe233fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7c5e000-0xd7cb3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7d1a000-0xd7e56fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7e57000-0xd9f47fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9f48000-0xd9ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u1048576
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2029426
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=f538e051-6ccc-4731-b628-1ee10a1d0953 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7772356K/8246668K available (12300K kernel code, 2473K rwdata, 4252K rodata, 2408K init, 2416K bss, 474312K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39198 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3199.982 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.96 BogoMIPS (lpj=12799928)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] mce: CPU supports 7 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.032273] Freeing SMP alternatives memory: 36K
[    0.037458] TSC deadline timer enabled
[    0.037460] smpboot: CPU0: Intel(R) Pentium(R) CPU G3258 @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.037517] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.037550] ... version:                3
[    0.037551] ... bit width:              48
[    0.037551] ... generic registers:      8
[    0.037552] ... value mask:             0000ffffffffffff
[    0.037552] ... max period:             00007fffffffffff
[    0.037553] ... fixed-purpose events:   3
[    0.037553] ... event mask:             00000007000000ff
[    0.037581] Hierarchical SRCU implementation.
[    0.038224] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.038236] smp: Bringing up secondary CPUs ...
[    0.038293] x86: Booting SMP configuration:
[    0.038294] .... node  #0, CPUs:      #1
[    0.039871] smp: Brought up 1 node, 2 CPUs
[    0.039871] smpboot: Max logical packages: 1
[    0.039871] smpboot: Total of 2 processors activated (12799.92 BogoMIPS)
[    0.039871] devtmpfs: initialized
[    0.039871] x86/mm: Memory block size: 128MB
[    0.039871] evm: security.selinux
[    0.039871] evm: security.SMACK64
[    0.039871] evm: security.SMACK64EXEC
[    0.039871] evm: security.SMACK64TRANSMUTE
[    0.039871] evm: security.SMACK64MMAP
[    0.039871] evm: security.apparmor
[    0.039871] evm: security.ima
[    0.039871] evm: security.capability
[    0.040019] PM: Registering ACPI NVS region [mem 0xbd28f000-0xbd295fff] (28672 bytes)
[    0.040020] PM: Registering ACPI NVS region [mem 0xd7d1a000-0xd7e56fff] (1298432 bytes)
[    0.040063] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040063] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.040063] pinctrl core: initialized pinctrl subsystem
[    0.040120] RTC time: 20:37:27, date: 03/11/19
[    0.040191] NET: Registered protocol family 16
[    0.040246] audit: initializing netlink subsys (disabled)
[    0.040250] audit: type=2000 audit(1552336647.040:1): state=initialized audit_enabled=0 res=1
[    0.040250] cpuidle: using governor ladder
[    0.040250] cpuidle: using governor menu
[    0.040250] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.040250] ACPI: bus type PCI registered
[    0.040250] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040250] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.040250] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.040250] PCI: Using configuration type 1 for base access
[    0.040250] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.040837] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.040837] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.040837] ACPI: Added _OSI(Module Device)
[    0.040837] ACPI: Added _OSI(Processor Device)
[    0.040837] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040837] ACPI: Added _OSI(Processor Aggregator Device)
[    0.040837] ACPI: Added _OSI(Linux-Dell-Video)
[    0.040837] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.040837] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.040837] ACPI: Executed 15 blocks of module-level executable AML code
[    0.049863] ACPI: Dynamic OEM Table Load:
[    0.049868] ACPI: SSDT 0xFFFF90BD163F9C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.050336] ACPI: Dynamic OEM Table Load:
[    0.050339] ACPI: SSDT 0xFFFF90BD163C8800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.050842] ACPI: Dynamic OEM Table Load:
[    0.050845] ACPI: SSDT 0xFFFF90BD15C30600 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.052728] ACPI: Interpreter enabled
[    0.052756] ACPI: (supports S0 S3 S4 S5)
[    0.052757] ACPI: Using IOAPIC for interrupt routing
[    0.052783] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.053645] ACPI: GPE 0x1E active on init
[    0.053650] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.054479] ACPI: Power Resource [PG00] (on)
[    0.054889] ACPI: Power Resource [PG01] (on)
[    0.055295] ACPI: Power Resource [PG02] (on)
[    0.069137] ACPI: Power Resource [FN00] (off)
[    0.069204] ACPI: Power Resource [FN01] (off)
[    0.069269] ACPI: Power Resource [FN02] (off)
[    0.069334] ACPI: Power Resource [FN03] (off)
[    0.069398] ACPI: Power Resource [FN04] (off)
[    0.070358] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.070363] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.070609] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.070771] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.070772] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.071361] PCI host bridge to bus 0000:00
[    0.071363] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.071364] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.071365] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.071366] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.071367] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.071368] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.071369] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.071370] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.071371] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.071377] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.071463] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
[    0.071471] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.071476] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.071479] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.071489] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.071558] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.071565] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
[    0.071661] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.071678] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.071729] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.071798] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.071816] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c00f 64bit]
[    0.071870] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.071962] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.071981] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff]
[    0.072055] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.072128] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.072144] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    0.072196] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.072266] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.072328] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.072441] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
[    0.072503] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.072614] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[    0.072676] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.072791] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.072810] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a3ff]
[    0.072884] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.072955] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.073112] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.073125] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.073131] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.073137] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.073143] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.073148] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.073154] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d19000-0xf7d197ff]
[    0.073184] pci 0000:00:1f.2: PME# supported from D3hot
[    0.073247] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.073262] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d18000-0xf7d180ff 64bit]
[    0.073279] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.073402] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.073464] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.073490] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.073516] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[    0.073533] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.073622] pci 0000:02:00.0: supports D1 D2
[    0.073623] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084029] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.084031] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.084034] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.084037] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.084101] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[    0.084225] pci 0000:03:00.0: supports D1 D2
[    0.084226] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084284] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.084396] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.085473] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
[    0.085527] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.085582] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 10 *11 12 14 15)
[    0.085634] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 *10 11 12 14 15)
[    0.085687] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.085741] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.085794] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 *10 11 12 14 15)
[    0.085846] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 10 *11 12 14 15)
[    0.086281] SCSI subsystem initialized
[    0.086289] libata version 3.00 loaded.
[    0.086289] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.086289] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.086289] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.086289] vgaarb: loaded
[    0.086289] ACPI: bus type USB registered
[    0.086289] usbcore: registered new interface driver usbfs
[    0.086289] usbcore: registered new interface driver hub
[    0.086289] usbcore: registered new device driver usb
[    0.086289] EDAC MC: Ver: 3.0.0
[    0.086289] Registered efivars operations
[    0.108307] PCI: Using ACPI for IRQ routing
[    0.109349] PCI: pci_cache_line_size set to 64 bytes
[    0.109382] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.109383] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.109384] e820: reserve RAM buffer [mem 0xbd28f000-0xbfffffff]
[    0.109385] e820: reserve RAM buffer [mem 0xbdd3c000-0xbfffffff]
[    0.109385] e820: reserve RAM buffer [mem 0xd7c5e000-0xd7ffffff]
[    0.109386] e820: reserve RAM buffer [mem 0xd7d1a000-0xd7ffffff]
[    0.109387] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[    0.109388] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.112000] NetLabel: Initializing
[    0.112000] NetLabel:  domain hash size = 128
[    0.112000] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.112000] NetLabel:  unlabeled traffic allowed by default
[    0.112236] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.112240] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.114254] clocksource: Switched to clocksource hpet
[    0.119906] VFS: Disk quotas dquot_6.6.0
[    0.119919] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.120000] AppArmor: AppArmor Filesystem Enabled
[    0.120030] pnp: PnP ACPI init
[    0.120196] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.120200] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.120288] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.120420] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120439] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.120471] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.120473] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.120625] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.120626] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.120627] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.120630] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120865] pnp 00:05: [dma 0 disabled]
[    0.120901] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.121120] pnp 00:06: [dma 0 disabled]
[    0.121156] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.121444] pnp 00:07: [dma 0 disabled]
[    0.121549] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.121589] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.121592] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.122070] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.122071] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.122072] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.122073] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.122074] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.122076] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.122077] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.122078] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.122079] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.122080] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.122082] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.122084] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.122275] pnp: PnP ACPI: found 10 devices
[    0.127932] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.127964] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.127973] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.127975] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.127978] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.127980] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.127985] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.128008] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.128016] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.128018] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.128019] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.128020] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.128021] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.128022] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.128023] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.128024] pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window]
[    0.128025] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.128026] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.128027] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.128156] NET: Registered protocol family 2
[    0.128296] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.128372] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.128478] TCP: Hash tables configured (established 65536 bind 65536)
[    0.128498] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.128518] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.128556] NET: Registered protocol family 1
[    0.128565] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.176088] PCI: CLS 64 bytes, default 64
[    0.176114] Unpacking initramfs...
[    0.556112] Freeing initrd memory: 36920K
[    0.556139] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.556142] software IO TLB [mem 0xc6b05000-0xcab05000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.556307] Scanning for low memory corruption every 60 seconds
[    0.556740] Initialise system trusted keyrings
[    0.556746] Key type blacklist registered
[    0.556767] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.557538] zbud: loaded
[    0.557877] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.557965] fuse init (API version 7.26)
[    0.558799] Key type asymmetric registered
[    0.558800] Asymmetric key parser 'x509' registered
[    0.558824] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.558843] io scheduler noop registered
[    0.558844] io scheduler deadline registered
[    0.558861] io scheduler cfq registered (default)
[    0.559311] efifb: probing for efifb
[    0.559319] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.559320] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.559320] efifb: scrolling: redraw
[    0.559322] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.559388] Console: switching to colour frame buffer device 128x48
[    0.559398] fb0: EFI VGA frame buffer device
[    0.559405] intel_idle: MWAIT substates: 0x2120
[    0.559406] intel_idle: v0.4.1 model 0x3C
[    0.559450] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.559552] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.559569] ACPI: Power Button [PWRB]
[    0.559595] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.559600] ACPI: Sleep Button [SLPB]
[    0.559622] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.559633] ACPI: Power Button [PWRF]
[    0.560239] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.560379] thermal LNXTHERM:00: registered as thermal_zone0
[    0.560380] ACPI: Thermal Zone [TZ00] (28 C)
[    0.560590] thermal LNXTHERM:01: registered as thermal_zone1
[    0.560590] ACPI: Thermal Zone [TZ01] (30 C)
[    0.560711] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.581149] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.601671] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.603056] Linux agpgart interface v0.103
[    0.603910] loop: module loaded
[    0.604028] libphy: Fixed MDIO Bus: probed
[    0.604029] tun: Universal TUN/TAP device driver, 1.6
[    0.604049] PPP generic driver version 2.4.2
[    0.604075] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.604077] ehci-pci: EHCI PCI platform driver
[    0.604158] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.604165] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.604174] ehci-pci 0000:00:1a.0: debug port 2
[    0.608083] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.608135] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1b000
[    0.609370] random: fast init done
[    0.624024] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.624063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.624064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.624066] usb usb1: Product: EHCI Host Controller
[    0.624067] usb usb1: Manufacturer: Linux 4.15.0-46-generic ehci_hcd
[    0.624069] usb usb1: SerialNumber: 0000:00:1a.0
[    0.624191] hub 1-0:1.0: USB hub found
[    0.624197] hub 1-0:1.0: 2 ports detected
[    0.624472] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.624477] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.624490] ehci-pci 0000:00:1d.0: debug port 2
[    0.628382] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.628393] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1a000
[    0.644017] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.644048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.644049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.644051] usb usb2: Product: EHCI Host Controller
[    0.644052] usb usb2: Manufacturer: Linux 4.15.0-46-generic ehci_hcd
[    0.644054] usb usb2: SerialNumber: 0000:00:1d.0
[    0.644163] hub 2-0:1.0: USB hub found
[    0.644168] hub 2-0:1.0: 2 ports detected
[    0.644314] ehci-platform: EHCI generic platform driver
[    0.644324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.644327] ohci-pci: OHCI PCI platform driver
[    0.644334] ohci-platform: OHCI generic platform driver
[    0.644342] uhci_hcd: USB Universal Host Controller Interface driver
[    0.644472] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.644477] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.645577] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.645582] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.645721] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.645724] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.645725] usb usb3: Product: xHCI Host Controller
[    0.645727] usb usb3: Manufacturer: Linux 4.15.0-46-generic xhci-hcd
[    0.645728] usb usb3: SerialNumber: 0000:00:14.0
[    0.645843] hub 3-0:1.0: USB hub found
[    0.645859] hub 3-0:1.0: 14 ports detected
[    0.650520] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.650524] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.650527] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.650564] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.650567] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.650568] usb usb4: Product: xHCI Host Controller
[    0.650568] usb usb4: Manufacturer: Linux 4.15.0-46-generic xhci-hcd
[    0.650570] usb usb4: SerialNumber: 0000:00:14.0
[    0.650681] hub 4-0:1.0: USB hub found
[    0.650693] hub 4-0:1.0: 6 ports detected
[    0.652945] i8042: PNP: No PS/2 controller found.
[    0.653030] mousedev: PS/2 mouse device common for all mice
[    0.653215] rtc_cmos 00:02: RTC can wake from S4
[    0.653354] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.653378] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.653386] i2c /dev entries driver
[    0.653390] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    0.653460] device-mapper: uevent: version 1.0.3
[    0.653527] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.653533] intel_pstate: Intel P-state driver initializing
[    0.653603] ledtrig-cpu: registered to indicate activity on CPUs
[    0.653605] EFI Variables Facility v0.08 2004-May-17
[    0.681414] NET: Registered protocol family 10
[    0.684867] Segment Routing with IPv6
[    0.684883] NET: Registered protocol family 17
[    0.684910] Key type dns_resolver registered
[    0.685066] RAS: Correctable Errors collector initialized.
[    0.685100] microcode: sig=0x306c3, pf=0x2, revision=0x25
[    0.685134] microcode: Microcode Update Driver: v2.2.
[    0.685148] sched_clock: Marking stable (685128817, 0)->(664675059, 20453758)
[    0.685320] registered taskstats version 1
[    0.685331] Loading compiled-in X.509 certificates
[    0.687014] random: crng init done
[    0.687678] Loaded X.509 cert 'Build time autogenerated kernel key: b873a790e41754b50f7dbae45b6bd46229c3c73f'
[    0.688272] Couldn't get size: 0x800000000000000e
[    0.688275] MODSIGN: Couldn't get UEFI db list
[    0.688570] Couldn't get size: 0x800000000000000e
[    0.688571] MODSIGN: Couldn't get UEFI MokListRT
[    0.689450] zswap: loaded using pool lzo/zbud
[    0.691978] Key type big_key registered
[    0.691983] Key type trusted registered
[    0.693352] Key type encrypted registered
[    0.693355] AppArmor: AppArmor sha1 policy hashing enabled
[    0.693358] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.693363] ima: Allocated hash algorithm: sha1
[    0.693378] evm: HMAC attrs: 0x1
[    0.693988]   Magic number: 11:510:649
[    0.694046] acpi LNXCPU:02: hash matches
[    0.694096] rtc_cmos 00:02: setting system clock to 2019-03-11 20:37:27 UTC (1552336647)
[    0.694133] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.694133] EDD information not available.
[    0.960011] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.980011] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.984011] usb 3-6: new full-speed USB device number 2 using xhci_hcd
[    0.991083] Freeing unused kernel memory: 2408K
[    1.008014] Write protecting the kernel read-only data: 20480k
[    1.009376] Freeing unused kernel memory: 2008K
[    1.014389] Freeing unused kernel memory: 1892K
[    1.022118] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.022119] x86/mm: Checking user space page tables
[    1.027155] irq 16: nobody cared (try booting with the "irqpoll" option)
[    1.027159] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-46-generic #49-Ubuntu
[    1.027159] Hardware name: Gigabyte Technology Co., Ltd. Z97P-D3/Z97P-D3, BIOS F7 04/22/2015
[    1.027160] Call Trace:
[    1.027161]  <IRQ>
[    1.027165]  dump_stack+0x63/0x8b
[    1.027168]  __report_bad_irq+0x35/0xc0
[    1.027170]  note_interrupt+0x24b/0x2a0
[    1.027172]  handle_irq_event_percpu+0x54/0x80
[    1.027173]  handle_irq_event+0x3b/0x60
[    1.027175]  handle_fasteoi_irq+0x75/0x130
[    1.027177]  handle_irq+0x20/0x30
[    1.027178]  do_IRQ+0x4e/0xd0
[    1.027181]  common_interrupt+0x84/0x84
[    1.027181]  </IRQ>
[    1.027183] RIP: 0010:note_page+0x15/0x820
[    1.027184] RSP: 0018:ffffb88580c7fe08 EFLAGS: 00000286 ORIG_RAX: ffffffffffffffde
[    1.027186] RAX: ffffffff9ac39aa8 RBX: ff4aaa7070000000 RCX: 0000000000000005
[    1.027186] RDX: 0000000000000000 RSI: ffffb88580c7fe90 RDI: 0000000000000000
[    1.027187] RBP: ffffb88580c7fe30 R08: 0000000000000001 R09: ffffff4aaa705000
[    1.027187] R10: 0000000000000001 R11: 0000000000000000 R12: ffff90bd1701b838
[    1.027188] R13: 00003ffffffff000 R14: 0000000000000000 R15: ffffb88580c7fe90
[    1.027190]  ptdump_walk_pgd_level_core+0x402/0x4e0
[    1.027192]  ? 0xffffffff99800000
[    1.027193]  ptdump_walk_pgd_level_checkwx+0x46/0x50
[    1.027195]  mark_rodata_ro+0xf4/0x100
[    1.027197]  ? rest_init+0xb0/0xb0
[    1.027198]  kernel_init+0x34/0x110
[    1.027200]  ret_from_fork+0x35/0x40
[    1.027201] handlers:
[    1.027205] [<0000000050ec2d80>] usb_hcd_irq
[    1.027206] Disabling IRQ #16
[    1.028936] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.126168] ahci 0000:00:1f.2: version 3.0
[    1.126341] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2a impl SATA mode
[    1.126343] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    1.127812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.127816] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.128517] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x00000000500b0f10, fc:aa:14:c9:3c:1f, XID 0c900800 IRQ 26
[    1.128518] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.129129] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.134065] usb 3-6: New USB device found, idVendor=046d, idProduct=c534
[    1.134067] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.134068] usb 3-6: Product: USB Receiver
[    1.134069] usb 3-6: Manufacturer: Logitech
[    1.137062] usb 2-1: New USB device found, idVendor=8087, idProduct=8001
[    1.137063] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.137191] hub 2-1:1.0: USB hub found
[    1.137323] hub 2-1:1.0: 8 ports detected
[    1.137597] hidraw: raw HID events driver (C) Jiri Kosina
[    1.142067] usbcore: registered new interface driver usbhid
[    1.142067] usbhid: USB HID core driver
[    1.143513] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C534.0001/input/input3
[    1.148707] scsi host0: ahci
[    1.148768] scsi host1: ahci
[    1.148814] scsi host2: ahci
[    1.148859] scsi host3: ahci
[    1.148905] scsi host4: ahci
[    1.148950] scsi host5: ahci
[    1.148972] ata1: DUMMY
[    1.148974] ata2: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19180 irq 25
[    1.148975] ata3: DUMMY
[    1.148976] ata4: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19280 irq 25
[    1.148977] ata5: DUMMY
[    1.148978] ata6: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19380 irq 25
[    1.200120] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-6/input0
[    1.200303] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C534.0002/input/input4
[    1.260163] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input1
[    1.440053] usb 1-1: New USB device found, idVendor=8087, idProduct=8009
[    1.440055] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.462962] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.462975] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.462988] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.463776] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.463778] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.463779] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.464399] ata6.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max UDMA/100
[    1.464401] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.465227] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.465229] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.465230] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.465662] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224FB, SB00, max UDMA/100
[    1.465865] ata6.00: configured for UDMA/100
[    1.468874] ata2.00: configured for UDMA/100
[    1.470340] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224FB  SB00 PQ: 0 ANSI: 5
[    1.477848] ata4.00: ATA-8: KINGSTON SV300S37A120G, 600ABBF0, max UDMA/133
[    1.477849] ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.484641] ata4.00: configured for UDMA/133
[    1.527930] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.527931] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.528011] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.528045] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.528179] scsi 3:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[    1.528285] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.528366] sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.528372] sd 3:0:0:0: [sda] Write Protect is off
[    1.528373] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.528384] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.528411] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08M 1A01 PQ: 0 ANSI: 5
[    1.528534] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.528535] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    1.528541] sd 5:0:0:0: [sdb] Write Protect is off
[    1.528542] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.528552] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.528673] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    1.529473]  sda: sda1 sda2
[    1.529657] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.544062] hub 1-1:1.0: USB hub found
[    1.547864]  sdb: sdb1 sdb2
[    1.548082] sd 5:0:0:0: [sdb] Attached SCSI disk
[    1.572018] tsc: Refined TSC clocksource calibration: 3199.997 MHz
[    1.572022] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e204719c91, max_idle_ns: 440795261699 ns
[    1.648057] hub 1-1:1.0: 6 ports detected
[    2.516583] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.592086] clocksource: Switched to clocksource tsc
[    2.607470] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.666699] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.684325] systemd[1]: Detected architecture x86-64.
[    2.685795] systemd[1]: Set hostname to <maison>.
[    2.771604] systemd[1]: Reached target User and Group Name Lookups.
[    2.771775] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.771904] systemd[1]: Created slice System Slice.
[    2.771968] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.772015] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.772115] systemd[1]: Listening on Journal Audit Socket.
[    2.772126] systemd[1]: Reached target Remote File Systems.
[    2.789793] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    2.806201] lp: driver loaded but no devices found
[    2.823526] ppdev: user-space parallel port driver
[    2.825170] parport_pc 00:07: reported by Plug and Play ACPI
[    2.825236] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[    2.868104] systemd-journald[236]: Received request to flush runtime journal from PID 1
[    2.904863] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    2.920074] lp0: using parport0 (interrupt-driven).
[    3.191798] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.211199] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
[    3.211204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.211206] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    3.211209] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.211209] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[    3.211212] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    3.211214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.211215] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[    3.211217] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    3.211220] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.211220] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.235357] [drm] Memory usable by graphics device = 2048M
[    3.235359] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    3.235360] fb: switching to inteldrmfb from EFI VGA
[    3.235385] Console: switching to colour dummy device 80x25
[    3.235444] [drm] Replacing VGA console driver
[    3.246712] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.246713] [drm] Driver supports precise vblank timestamp query.
[    3.248155] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.276379] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    3.277540] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.277832] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    3.277945] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    3.278053] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    3.293916] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.293918] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.293920] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.293920] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
[    3.293921] snd_hda_codec_realtek hdaudioC1D2:    dig-out=0x11/0x0
[    3.293922] snd_hda_codec_realtek hdaudioC1D2:    inputs:
[    3.293924] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x19
[    3.293925] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x18
[    3.293926] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
[    3.307267] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[    3.307307] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[    3.307339] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    3.307370] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    3.307401] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    3.360317] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.360319] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.360319] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.360319] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.360320] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.420863] intel_rapl: Found RAPL domain package
[    3.420864] intel_rapl: Found RAPL domain core
[    3.420865] intel_rapl: Found RAPL domain uncore
[    3.420865] intel_rapl: Found RAPL domain dram
[    3.724307] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.724805] fbcon: inteldrmfb (fb0) is primary device
[    3.724869] Console: switching to colour frame buffer device 240x67
[    3.724889] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.756913] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    3.756947] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    3.756976] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    3.757006] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    3.757033] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    4.056688] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    4.124290] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    4.358762] audit: type=1400 audit(1552336651.157:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=646 comm="apparmor_parser"
[    4.358765] audit: type=1400 audit(1552336651.157:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=646 comm="apparmor_parser"
[    4.358767] audit: type=1400 audit(1552336651.157:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=646 comm="apparmor_parser"
[    4.358768] audit: type=1400 audit(1552336651.157:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=646 comm="apparmor_parser"
[    4.361199] audit: type=1400 audit(1552336651.161:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=649 comm="apparmor_parser"
[    4.361201] audit: type=1400 audit(1552336651.161:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=649 comm="apparmor_parser"
[    4.361203] audit: type=1400 audit(1552336651.161:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=649 comm="apparmor_parser"
[    4.365355] audit: type=1400 audit(1552336651.165:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=650 comm="apparmor_parser"
[    4.368554] audit: type=1400 audit(1552336651.169:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=647 comm="apparmor_parser"
[    5.665305] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    5.853403] r8169 0000:02:00.0 enp2s0: link down
[    5.853404] r8169 0000:02:00.0 enp2s0: link down
[    5.853469] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    8.742058] r8169 0000:02:00.0 enp2s0: link up
[    8.742064] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   65.320791] rfkill: input handler disabled
[   85.118670] kauditd_printk_skb: 33 callbacks suppressed
[   85.118671] audit: type=1107 audit(1552336733.381:44): pid=734 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=2266 label="snap.chromium.chromium"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   93.861663] audit: type=1400 audit(1552336742.125:45): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c99:0" pid=2266 comm="TaskSchedulerFo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   93.876625] audit: type=1400 audit(1552336742.137:46): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c6:0" pid=2266 comm="TaskSchedulerFo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Dernière modification par fgi (Le 13/03/2019, à 01:03)


L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]

~ Ubuntu 18.04 64 bits ~

Hors ligne

#2 Le 11/03/2019, à 23:54

xubu1957

Re : [Résolu]Temps de démarrage 18.04

Bonjour,

Donne les retours de :

systemd-analyze critical-chain
systemd-analyze blame

Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#3 Le 12/03/2019, à 23:34

fgi

Re : [Résolu]Temps de démarrage 18.04

Bonsoir,

merci d'avoir répondu. Voilà 2 commandes que je ne connaissais pas ;-)

$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @5.693s
└─multi-user.target @5.693s
  └─smbd.service @5.628s +65ms
    └─nmbd.service @5.571s +55ms
      └─network-online.target @5.571s
        └─NetworkManager-wait-online.service @2.168s +3.402s
          └─NetworkManager.service @1.932s +235ms
            └─dbus.service @1.916s
              └─basic.target @1.869s
                └─sockets.target @1.869s
                  └─snapd.socket @1.863s +2ms
                    └─sysinit.target @1.860s
                      └─apparmor.service @1.729s +130ms
                        └─local-fs.target @1.724s
                          └─run-user-1000-gvfs.mount @16.066s
                            └─run-user-1000.mount @14.102s
                              └─local-fs-pre.target @322ms
                                └─keyboard-setup.service @188ms +133ms
                                  └─systemd-journald.socket @186ms
                                    └─system.slice @185ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @5.693s
└─multi-user.target @5.693s
  └─smbd.service @5.628s +65ms
    └─nmbd.service @5.571s +55ms
      └─network-online.target @5.571s
        └─NetworkManager-wait-online.service @2.168s +3.402s
          └─NetworkManager.service @1.932s +235ms
            └─dbus.service @1.916s
              └─basic.target @1.869s
                └─sockets.target @1.869s
                  └─snapd.socket @1.863s +2ms
                    └─sysinit.target @1.860s
                      └─apparmor.service @1.729s +130ms
                        └─local-fs.target @1.724s
                          └─run-user-1000-gvfs.mount @16.066s
                            └─run-user-1000.mount @14.102s
                              └─local-fs-pre.target @322ms
                                └─keyboard-setup.service @188ms +133ms
                                  └─systemd-journald.socket @186ms
                                    └─system.slice @185ms
lines 1-23...skipping...
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @5.693s
└─multi-user.target @5.693s
  └─smbd.service @5.628s +65ms
    └─nmbd.service @5.571s +55ms
      └─network-online.target @5.571s
        └─NetworkManager-wait-online.service @2.168s +3.402s
          └─NetworkManager.service @1.932s +235ms
            └─dbus.service @1.916s
              └─basic.target @1.869s
                └─sockets.target @1.869s
                  └─snapd.socket @1.863s +2ms
                    └─sysinit.target @1.860s
                      └─apparmor.service @1.729s +130ms
                        └─local-fs.target @1.724s
                          └─run-user-1000-gvfs.mount @16.066s
                            └─run-user-1000.mount @14.102s
                              └─local-fs-pre.target @322ms
                                └─keyboard-setup.service @188ms +133ms
                                  └─systemd-journald.socket @186ms
                                    └─system.slice @185ms
                                      └─-.slice @183ms
lines 1-24...skipping...
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @5.693s
└─multi-user.target @5.693s
  └─smbd.service @5.628s +65ms
    └─nmbd.service @5.571s +55ms
      └─network-online.target @5.571s
        └─NetworkManager-wait-online.service @2.168s +3.402s
          └─NetworkManager.service @1.932s +235ms
            └─dbus.service @1.916s
              └─basic.target @1.869s
                └─sockets.target @1.869s
                  └─snapd.socket @1.863s +2ms
                    └─sysinit.target @1.860s
                      └─apparmor.service @1.729s +130ms
                        └─local-fs.target @1.724s
                          └─run-user-1000-gvfs.mount @16.066s
                            └─run-user-1000.mount @14.102s
                              └─local-fs-pre.target @322ms
                                └─keyboard-setup.service @188ms +133ms
                                  └─systemd-journald.socket @186ms
                                    └─system.slice @185ms
                                      └─-.slice @183ms
~
$ systemd-analyze blame
         16.212s apt-daily.service
          5.057s snapd.service
          3.479s plymouth-quit-wait.service
          3.402s NetworkManager-wait-online.service
          1.510s dev-sda2.device
           811ms fwupd.service
           674ms dev-loop21.device
           669ms dev-loop20.device
           665ms dev-loop17.device
           653ms dev-loop22.device
           650ms dev-loop23.device
           649ms dev-loop8.device
           632ms dev-loop9.device
           621ms dev-loop5.device
           610ms systemd-journal-flush.service
           602ms dev-loop19.device
           601ms dev-loop6.device
           597ms dev-loop10.device
           596ms dev-loop11.device
           593ms dev-loop18.device
           591ms dev-loop15.device
           590ms dev-loop7.device
           590ms dev-loop14.device
           588ms dev-loop16.device
           571ms dev-loop12.device
           524ms dev-loop1.device
           486ms dev-loop3.device
           480ms dev-loop4.device
           478ms dev-loop0.device
           475ms dev-loop2.device
           430ms udisks2.service
           282ms systemd-udevd.service
           264ms donnees.mount
           235ms NetworkManager.service
           221ms systemd-modules-load.service
           209ms networkd-dispatcher.service
           186ms accounts-daemon.service
           176ms snap-gnome\x2d3\x2d26\x2d1604-82.mount
           170ms systemd-logind.service
           169ms ModemManager.service
           154ms snap-chromium-621.mount
           137ms grub-common.service
           133ms keyboard-setup.service
           132ms user@121.service
           130ms apparmor.service
           126ms snap-gnome\x2dcalculator-180.mount
           123ms snap-odrive\x2dunofficial-2.mount
           118ms snap-gnome\x2d3\x2d26\x2d1604-74.mount
           117ms alsa-restore.service
           110ms snap-core18-719.mount
           109ms snap-gtk\x2dcommon\x2dthemes-1198.mount
           106ms apport.service
           104ms networking.service
           101ms speech-dispatcher.service
            96ms systemd-resolved.service
            94ms snap-chromium-645.mount
            93ms snap-core-6405.mount
            93ms user@1000.service
            92ms pppd-dns.service
            92ms systemd-timesyncd.service
            89ms systemd-udev-trigger.service
            87ms snap-gnome\x2d3\x2d26\x2d1604-78.mount
            82ms swapfile.swap
            82ms snap-gnome\x2dlogs-45.mount
            78ms wpa_supplicant.service
            78ms snap-core-6350.mount
            76ms snap-core18-731.mount
            76ms snap-gnome\x2dsystem\x2dmonitor-57.mount
            73ms snap-gnome\x2dlogs-37.mount
            71ms snap-gnome\x2dcharacters-139.mount
            70ms snap-gnome\x2dcharacters-103.mount
            70ms avahi-daemon.service
            67ms systemd-journald.service
            67ms snap-gnome\x2dsystem\x2dmonitor-51.mount
            65ms home.mount
            65ms smbd.service
            64ms upower.service
            62ms rsyslog.service
            61ms snap-core18-677.mount
            60ms bolt.service
            60ms snap-gtk\x2dcommon\x2dthemes-818.mount
            58ms snap-core-6531.mount
            57ms snapd.seeded.service
            57ms thermald.service
            55ms nmbd.service
            45ms packagekit.service
            45ms snap-gtk\x2dcommon\x2dthemes-1122.mount
            44ms polkit.service
            43ms gpu-manager.service
            42ms snap-chromium-595.mount
            42ms systemd-tmpfiles-setup-dev.service
            38ms snap-gnome\x2dcalculator-260.mount
            31ms plymouth-start.service
            29ms gdm.service
            27ms dev-loop24.device
            26ms colord.service
            19ms systemd-fsck@dev-disk-by\x2duuid-C700\x2dEA6C.service
            19ms systemd-remount-fs.service
            18ms dev-mqueue.mount
            18ms ufw.service
            16ms sys-kernel-debug.mount
            15ms dns-clean.service
            13ms systemd-tmpfiles-clean.service
            12ms plymouth-read-write.service
            11ms systemd-sysctl.service
            11ms kerneloops.service
            10ms systemd-tmpfiles-setup.service
            10ms kmod-static-nodes.service
             9ms systemd-random-seed.service
             9ms systemd-user-sessions.service
             8ms systemd-update-utmp.service
             6ms console-setup.service
             6ms ureadahead-stop.service
             5ms sys-kernel-config.mount
             5ms boot-efi.mount
             5ms systemd-update-utmp-runlevel.service
             4ms sys-fs-fuse-connections.mount
             4ms dev-hugepages.mount
             3ms rtkit-daemon.service
             2ms snapd.socket
             1ms setvtrgb.service
lines 84-121/121 (END)

L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]

~ Ubuntu 18.04 64 bits ~

Hors ligne

#4 Le 12/03/2019, à 23:43

xubu1957

Re : [Résolu]Temps de démarrage 18.04

Bonsoir,

J'avais cette réponse de maxire :

Le 16/03/2018, maxire a écrit :

Pour information, j'ai fait passer le temps de démarrage d'une Debian Stratch de 1mn37s à 50s en désactivant apt-daily-upgrade.
Pas besoin de supprimer le paquet update-notifier, il suffit dans  l'application <<Mises à jour logicielles>> d'aller dans les préférences et de désactiver la recherche automatique de mises à jour.

Ceci confirme que ce truc de mise à jour automatique est bien pourri!

> Désactivation IPv6 difficile avec carte Realtek

_ _ _

Montre :

snap list --all

Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#5 Le 12/03/2019, à 23:56

fgi

Re : [Résolu]Temps de démarrage 18.04

Je viens de changer le paramétrage de Synaptic. Je reboote et on en reparle ;-)

$ snap list --all
Name                  Version          Rev   Tracking  Publisher   Notes
chromium              72.0.3626.96     595   stable    canonical✓  désactivé
chromium              72.0.3626.119    621   stable    canonical✓  désactivé
chromium              72.0.3626.121    645   stable    canonical✓  -
core                  16-2.37.2        6405  stable    canonical✓  core,désactivé
core                  16-2.37.4        6531  stable    canonical✓  core
core                  16-2.37.1        6350  stable    canonical✓  core,désactivé
core18                18               731   stable    canonical✓  base
core18                18               719   stable    canonical✓  base,désactivé
core18                18               677   stable    canonical✓  base,désactivé
gnome-3-26-1604       3.26.0           78    stable/…  canonical✓  désactivé
gnome-3-26-1604       3.26.0.20190228  82    stable/…  canonical✓  -
gnome-3-26-1604       3.26.0           74    stable/…  canonical✓  désactivé
gnome-calculator      3.28.2           180   stable/…  canonical✓  désactivé
gnome-calculator      3.30.1           260   stable/…  canonical✓  -
gnome-characters      3.30.0           139   stable/…  canonical✓  -
gnome-characters      3.28.2           103   stable/…  canonical✓  désactivé
gnome-logs            3.30.0           45    stable/…  canonical✓  -
gnome-logs            3.28.2           37    stable/…  canonical✓  désactivé
gnome-system-monitor  3.28.2           51    stable/…  canonical✓  désactivé
gnome-system-monitor  3.30.0           57    stable/…  canonical✓  -
gtk-common-themes     0.1-16-g2287c87  1198  stable/…  canonical✓  -
gtk-common-themes     0.1-7-g1feddba   1122  stable/…  canonical✓  désactivé
gtk-common-themes     0.1-4-g88bc1b2   818   stable/…  canonical✓  désactivé
odrive-unofficial     0.2.0            2     stable    ishan-bn14  -

L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]

~ Ubuntu 18.04 64 bits ~

Hors ligne

#6 Le 13/03/2019, à 00:02

xubu1957

Re : [Résolu]Temps de démarrage 18.04

Pour les snaps :

Le 24/11/2018, nany a écrit :

Mais d’abord les snaps.

Francoisph a écrit :

J'ai repéré les snaps mais je en sais tj pas à quoi ça sert, j'ai compris qu'en faisant snap remove on se débarrasse des snaps désactivés. A quoi ça sert ? à gagner de la place.

Oui, ça sert à gagner de la place.
Copie cette longue ligne de commandes (tu devra saisir ton mot de passe plusieurs fois mais je n’ai pas trouvé mieux) :

snap list --all | awk 'BEGIN {print "#! /bin/sh\n"} ; /désactivé/ {print "snap remove "$1" --revision "$3"\n"} ; END {print "exit 0"}' > script && chmod +x script && ./script && rm script && echo && snap list --all && echo && df -Th

Puis donne le retour.

fournie dans > Bugue libreoffice

Et stockée dans > |RESOLU] snap nettoyage des versions désactivées.

Dernière modification par xubu1957 (Le 13/03/2019, à 00:04)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#7 Le 13/03/2019, à 00:02

fgi

Re : [Résolu]Temps de démarrage 18.04

Bon, j'ai eu le tors de ne pas chronométrer avant... Alors à l'intuition ce n'est pas flagrant... pourtant :


$ systemd-analyze blame
          3.452s plymouth-quit-wait.service
          3.176s NetworkManager-wait-online.service
          1.546s dev-sda2.device
           879ms snapd.service
           816ms fwupd.service
           738ms dev-loop10.device
           714ms dev-loop8.device
           697ms dev-loop15.device
           688ms dev-loop16.device
           686ms dev-loop17.device
           685ms dev-loop11.device
           682ms dev-loop21.device
           681ms dev-loop9.device
           666ms dev-loop22.device
           665ms dev-loop19.device
           657ms dev-loop23.device
           649ms dev-loop20.device
           643ms dev-loop13.device
           641ms dev-loop18.device
           633ms dev-loop7.device
           628ms dev-loop6.device
           625ms dev-loop12.device
           619ms dev-loop1.device

et

$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02
[    0.000000] Linux version 4.15.0-46-generic (buildd@lgw01-amd64-038) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #49-Ubuntu SMP Wed Feb 6 09:33:07 UTC 2019 (Ubuntu 4.15.0-46.49-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=f538e051-6ccc-4731-b628-1ee10a1d0953 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd28efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd28f000-0x00000000bd295fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd296000-0x00000000bdd3bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdd3c000-0x00000000be233fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be234000-0x00000000d7c5dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7c5e000-0x00000000d7cb3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d7cb4000-0x00000000d7d19fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7d1a000-0x00000000d7e56fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d7e57000-0x00000000d9f47fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d9f48000-0x00000000d9ffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xd7e1c000  ACPI=0xd7e1c000  SMBIOS=0xf04c0  MPS=0xfd440 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z97P-D3/Z97P-D3, BIOS F7 04/22/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00DC000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 00DB000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 8110M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x114b3f000, 0x114b3ffff] PGTABLE
[    0.000000] BRK [0x114b40000, 0x114b40fff] PGTABLE
[    0.000000] BRK [0x114b41000, 0x114b41fff] PGTABLE
[    0.000000] BRK [0x114b42000, 0x114b42fff] PGTABLE
[    0.000000] BRK [0x114b43000, 0x114b43fff] PGTABLE
[    0.000000] BRK [0x114b44000, 0x114b44fff] PGTABLE
[    0.000000] BRK [0x114b45000, 0x114b45fff] PGTABLE
[    0.000000] BRK [0x114b46000, 0x114b46fff] PGTABLE
[    0.000000] BRK [0x114b47000, 0x114b47fff] PGTABLE
[    0.000000] BRK [0x114b48000, 0x114b48fff] PGTABLE
[    0.000000] BRK [0x114b49000, 0x114b49fff] PGTABLE
[    0.000000] BRK [0x114b4a000, 0x114b4afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337d3000-0x35be0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000D7E1C000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D7E1C080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D7E2C9A8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D7E1C190 010818 (v02 ALASKA A M I    00000088 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000D7E55080 000040
[    0.000000] ACPI: APIC 0x00000000D7E2CAB8 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000D7E2CB20 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000D7E2CB68 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000D7E2D758 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D7E2DC98 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 0x00000000D7E2E810 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000D7E2E850 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D7E2E888 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000D7E2EBF8 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: BGRT 0x00000000D7E34758 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21fdd5000-0x21fdfffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bd28efff]
[    0.000000]   node   0: [mem 0x00000000bd296000-0x00000000bdd3bfff]
[    0.000000]   node   0: [mem 0x00000000be234000-0x00000000d7c5dfff]
[    0.000000]   node   0: [mem 0x00000000d7cb4000-0x00000000d7d19fff]
[    0.000000]   node   0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.000000] Reserved but unavailable: 34973 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.000000] On node 0 totalpages: 2061667
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 25 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13728 pages used for memmap
[    0.000000]   DMA32 zone: 878534 pages, LIFO batch:31
[    0.000000]   Normal zone: 18424 pages used for memmap
[    0.000000]   Normal zone: 1179136 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000db200000-0x00000000df1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd28f000-0xbd295fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdd3c000-0xbe233fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7c5e000-0xd7cb3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7d1a000-0xd7e56fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7e57000-0xd9f47fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9f48000-0xd9ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u1048576
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2029426
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=f538e051-6ccc-4731-b628-1ee10a1d0953 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7772356K/8246668K available (12300K kernel code, 2473K rwdata, 4252K rodata, 2408K init, 2416K bss, 474312K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39198 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3200.296 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.59 BogoMIPS (lpj=12801184)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] mce: CPU supports 7 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.032258] Freeing SMP alternatives memory: 36K
[    0.037584] TSC deadline timer enabled
[    0.037586] smpboot: CPU0: Intel(R) Pentium(R) CPU G3258 @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.037643] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.037676] ... version:                3
[    0.037676] ... bit width:              48
[    0.037677] ... generic registers:      8
[    0.037677] ... value mask:             0000ffffffffffff
[    0.037678] ... max period:             00007fffffffffff
[    0.037678] ... fixed-purpose events:   3
[    0.037679] ... event mask:             00000007000000ff
[    0.037706] Hierarchical SRCU implementation.
[    0.038350] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.038361] smp: Bringing up secondary CPUs ...
[    0.038420] x86: Booting SMP configuration:
[    0.038421] .... node  #0, CPUs:      #1
[    0.039993] smp: Brought up 1 node, 2 CPUs
[    0.039993] smpboot: Max logical packages: 1
[    0.039993] smpboot: Total of 2 processors activated (12801.18 BogoMIPS)
[    0.039993] devtmpfs: initialized
[    0.039993] x86/mm: Memory block size: 128MB
[    0.039993] evm: security.selinux
[    0.039993] evm: security.SMACK64
[    0.039993] evm: security.SMACK64EXEC
[    0.039993] evm: security.SMACK64TRANSMUTE
[    0.039993] evm: security.SMACK64MMAP
[    0.039993] evm: security.apparmor
[    0.039993] evm: security.ima
[    0.039993] evm: security.capability
[    0.040019] PM: Registering ACPI NVS region [mem 0xbd28f000-0xbd295fff] (28672 bytes)
[    0.040020] PM: Registering ACPI NVS region [mem 0xd7d1a000-0xd7e56fff] (1298432 bytes)
[    0.040063] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040063] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.040063] pinctrl core: initialized pinctrl subsystem
[    0.040120] RTC time: 21:57:23, date: 03/12/19
[    0.040191] NET: Registered protocol family 16
[    0.040246] audit: initializing netlink subsys (disabled)
[    0.040250] audit: type=2000 audit(1552427843.040:1): state=initialized audit_enabled=0 res=1
[    0.040250] cpuidle: using governor ladder
[    0.040250] cpuidle: using governor menu
[    0.040250] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.040250] ACPI: bus type PCI registered
[    0.040250] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040250] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.040250] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.040250] PCI: Using configuration type 1 for base access
[    0.040250] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.040836] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.040836] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.040836] ACPI: Added _OSI(Module Device)
[    0.040836] ACPI: Added _OSI(Processor Device)
[    0.040836] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040836] ACPI: Added _OSI(Processor Aggregator Device)
[    0.040836] ACPI: Added _OSI(Linux-Dell-Video)
[    0.040836] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.040836] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.040836] ACPI: Executed 15 blocks of module-level executable AML code
[    0.049868] ACPI: Dynamic OEM Table Load:
[    0.049873] ACPI: SSDT 0xFFFF8870563F8400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.050339] ACPI: Dynamic OEM Table Load:
[    0.050343] ACPI: SSDT 0xFFFF8870563CC000 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.050846] ACPI: Dynamic OEM Table Load:
[    0.050849] ACPI: SSDT 0xFFFF887055C31C00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.052744] ACPI: Interpreter enabled
[    0.052773] ACPI: (supports S0 S3 S4 S5)
[    0.052774] ACPI: Using IOAPIC for interrupt routing
[    0.052800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.053668] ACPI: GPE 0x1E active on init
[    0.053672] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.054505] ACPI: Power Resource [PG00] (on)
[    0.054918] ACPI: Power Resource [PG01] (on)
[    0.055326] ACPI: Power Resource [PG02] (on)
[    0.069248] ACPI: Power Resource [FN00] (off)
[    0.069314] ACPI: Power Resource [FN01] (off)
[    0.069379] ACPI: Power Resource [FN02] (off)
[    0.069443] ACPI: Power Resource [FN03] (off)
[    0.069506] ACPI: Power Resource [FN04] (off)
[    0.070468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.070473] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.070719] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.070883] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.070884] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.071477] PCI host bridge to bus 0000:00
[    0.071479] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.071480] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.071481] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.071482] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.071483] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.071484] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.071485] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.071486] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.071487] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.071494] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.071578] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
[    0.071587] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.071591] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.071594] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.071604] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.071672] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.071679] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
[    0.071778] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.071795] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.071847] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.071915] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.071933] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c00f 64bit]
[    0.071988] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.072082] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.072101] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff]
[    0.072175] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.072247] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.072262] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    0.072314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.072384] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.072446] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.072560] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
[    0.072623] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.072734] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[    0.072796] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.072910] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.072929] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a3ff]
[    0.073003] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.073073] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.073231] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.073244] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.073250] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.073256] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.073261] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.073267] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.073273] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d19000-0xf7d197ff]
[    0.073303] pci 0000:00:1f.2: PME# supported from D3hot
[    0.073367] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.073381] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d18000-0xf7d180ff 64bit]
[    0.073398] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.073521] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.073582] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.073609] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.073635] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[    0.073651] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.073741] pci 0000:02:00.0: supports D1 D2
[    0.073742] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084028] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.084031] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.084033] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.084037] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.084099] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[    0.084224] pci 0000:03:00.0: supports D1 D2
[    0.084225] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084282] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.084396] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.085476] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
[    0.085530] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.085585] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 10 *11 12 14 15)
[    0.085637] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 *10 11 12 14 15)
[    0.085689] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.085743] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
[    0.085795] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 *10 11 12 14 15)
[    0.085847] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 10 *11 12 14 15)
[    0.086283] SCSI subsystem initialized
[    0.086292] libata version 3.00 loaded.
[    0.086292] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.086292] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.086292] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.086292] vgaarb: loaded
[    0.086292] ACPI: bus type USB registered
[    0.086292] usbcore: registered new interface driver usbfs
[    0.086292] usbcore: registered new interface driver hub
[    0.086292] usbcore: registered new device driver usb
[    0.086292] EDAC MC: Ver: 3.0.0
[    0.086292] Registered efivars operations
[    0.108306] PCI: Using ACPI for IRQ routing
[    0.109232] PCI: pci_cache_line_size set to 64 bytes
[    0.109272] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.109272] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.109273] e820: reserve RAM buffer [mem 0xbd28f000-0xbfffffff]
[    0.109274] e820: reserve RAM buffer [mem 0xbdd3c000-0xbfffffff]
[    0.109275] e820: reserve RAM buffer [mem 0xd7c5e000-0xd7ffffff]
[    0.109275] e820: reserve RAM buffer [mem 0xd7d1a000-0xd7ffffff]
[    0.109276] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[    0.109277] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.109343] NetLabel: Initializing
[    0.109343] NetLabel:  domain hash size = 128
[    0.109344] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.109354] NetLabel:  unlabeled traffic allowed by default
[    0.112238] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.112242] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.114257] clocksource: Switched to clocksource hpet
[    0.119812] VFS: Disk quotas dquot_6.6.0
[    0.119825] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.119903] AppArmor: AppArmor Filesystem Enabled
[    0.119925] pnp: PnP ACPI init
[    0.120101] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.120105] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.120195] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.120198] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120215] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.120246] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.120249] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.120402] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.120403] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.120404] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.120407] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120641] pnp 00:05: [dma 0 disabled]
[    0.120677] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.120897] pnp 00:06: [dma 0 disabled]
[    0.120932] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.121221] pnp 00:07: [dma 0 disabled]
[    0.121326] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.121366] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.121369] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121850] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.121852] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.121853] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.121854] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.121855] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.121857] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.121858] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.121859] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.121860] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.121861] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.121863] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.121865] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.122055] pnp: PnP ACPI: found 10 devices
[    0.127714] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.127747] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.127755] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.127757] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.127761] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.127763] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.127767] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.127786] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.127795] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.127796] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.127797] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.127798] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.127799] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.127800] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.127801] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.127802] pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window]
[    0.127804] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.127805] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.127806] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.127932] NET: Registered protocol family 2
[    0.128074] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.128150] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.128255] TCP: Hash tables configured (established 65536 bind 65536)
[    0.128277] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.128296] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.128335] NET: Registered protocol family 1
[    0.128344] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.176090] PCI: CLS 64 bytes, default 64
[    0.176115] Unpacking initramfs...
[    0.555666] Freeing initrd memory: 36920K
[    0.555686] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.555689] software IO TLB [mem 0xc6b07000-0xcab07000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.555861] Scanning for low memory corruption every 60 seconds
[    0.556309] Initialise system trusted keyrings
[    0.556316] Key type blacklist registered
[    0.556337] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.557109] zbud: loaded
[    0.557447] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.557535] fuse init (API version 7.26)
[    0.558367] Key type asymmetric registered
[    0.558368] Asymmetric key parser 'x509' registered
[    0.558394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.558412] io scheduler noop registered
[    0.558413] io scheduler deadline registered
[    0.558430] io scheduler cfq registered (default)
[    0.558882] efifb: probing for efifb
[    0.558891] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.558892] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.558892] efifb: scrolling: redraw
[    0.558894] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.558959] Console: switching to colour frame buffer device 128x48
[    0.558970] fb0: EFI VGA frame buffer device
[    0.558976] intel_idle: MWAIT substates: 0x2120
[    0.558977] intel_idle: v0.4.1 model 0x3C
[    0.559021] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.559123] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.559140] ACPI: Power Button [PWRB]
[    0.559166] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.559172] ACPI: Sleep Button [SLPB]
[    0.559194] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.559207] ACPI: Power Button [PWRF]
[    0.559815] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.559955] thermal LNXTHERM:00: registered as thermal_zone0
[    0.559956] ACPI: Thermal Zone [TZ00] (28 C)
[    0.560176] thermal LNXTHERM:01: registered as thermal_zone1
[    0.560177] ACPI: Thermal Zone [TZ01] (30 C)
[    0.560298] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.580738] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.601310] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.602750] Linux agpgart interface v0.103
[    0.603614] loop: module loaded
[    0.603725] libphy: Fixed MDIO Bus: probed
[    0.603725] tun: Universal TUN/TAP device driver, 1.6
[    0.603746] PPP generic driver version 2.4.2
[    0.603773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.603775] ehci-pci: EHCI PCI platform driver
[    0.603858] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.603863] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.603872] ehci-pci 0000:00:1a.0: debug port 2
[    0.607768] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.607781] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1b000
[    0.608873] random: fast init done
[    0.620029] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.620058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.620059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.620060] usb usb1: Product: EHCI Host Controller
[    0.620061] usb usb1: Manufacturer: Linux 4.15.0-46-generic ehci_hcd
[    0.620062] usb usb1: SerialNumber: 0000:00:1a.0
[    0.620167] hub 1-0:1.0: USB hub found
[    0.620170] hub 1-0:1.0: 2 ports detected
[    0.620353] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.620356] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.620366] ehci-pci 0000:00:1d.0: debug port 2
[    0.624280] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.624288] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1a000
[    0.640030] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.640061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.640062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.640063] usb usb2: Product: EHCI Host Controller
[    0.640064] usb usb2: Manufacturer: Linux 4.15.0-46-generic ehci_hcd
[    0.640065] usb usb2: SerialNumber: 0000:00:1d.0
[    0.640141] hub 2-0:1.0: USB hub found
[    0.640144] hub 2-0:1.0: 2 ports detected
[    0.640239] ehci-platform: EHCI generic platform driver
[    0.640246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.640248] ohci-pci: OHCI PCI platform driver
[    0.640253] ohci-platform: OHCI generic platform driver
[    0.640258] uhci_hcd: USB Universal Host Controller Interface driver
[    0.640350] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.640355] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.641439] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.641443] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.641549] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.641550] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.641551] usb usb3: Product: xHCI Host Controller
[    0.641552] usb usb3: Manufacturer: Linux 4.15.0-46-generic xhci-hcd
[    0.641553] usb usb3: SerialNumber: 0000:00:14.0
[    0.641624] hub 3-0:1.0: USB hub found
[    0.641643] hub 3-0:1.0: 14 ports detected
[    0.644477] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.644480] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.644482] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.644508] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.644509] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.644510] usb usb4: Product: xHCI Host Controller
[    0.644511] usb usb4: Manufacturer: Linux 4.15.0-46-generic xhci-hcd
[    0.644512] usb usb4: SerialNumber: 0000:00:14.0
[    0.644580] hub 4-0:1.0: USB hub found
[    0.644592] hub 4-0:1.0: 6 ports detected
[    0.646018] i8042: PNP: No PS/2 controller found.
[    0.646077] mousedev: PS/2 mouse device common for all mice
[    0.646181] rtc_cmos 00:02: RTC can wake from S4
[    0.646304] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.646330] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.646336] i2c /dev entries driver
[    0.646339] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    0.646381] device-mapper: uevent: version 1.0.3
[    0.646428] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.646432] intel_pstate: Intel P-state driver initializing
[    0.646478] ledtrig-cpu: registered to indicate activity on CPUs
[    0.646480] EFI Variables Facility v0.08 2004-May-17
[    0.672446] NET: Registered protocol family 10
[    0.675748] Segment Routing with IPv6
[    0.675762] NET: Registered protocol family 17
[    0.675791] Key type dns_resolver registered
[    0.675949] RAS: Correctable Errors collector initialized.
[    0.675984] microcode: sig=0x306c3, pf=0x2, revision=0x25
[    0.676024] microcode: Microcode Update Driver: v2.2.
[    0.676034] sched_clock: Marking stable (676019698, 0)->(655310003, 20709695)
[    0.676206] registered taskstats version 1
[    0.676216] Loading compiled-in X.509 certificates
[    0.678575] Loaded X.509 cert 'Build time autogenerated kernel key: b873a790e41754b50f7dbae45b6bd46229c3c73f'
[    0.679152] Couldn't get size: 0x800000000000000e
[    0.679155] MODSIGN: Couldn't get UEFI db list
[    0.679446] Couldn't get size: 0x800000000000000e
[    0.679447] MODSIGN: Couldn't get UEFI MokListRT
[    0.680310] zswap: loaded using pool lzo/zbud
[    0.682837] Key type big_key registered
[    0.682840] Key type trusted registered
[    0.684210] Key type encrypted registered
[    0.684212] AppArmor: AppArmor sha1 policy hashing enabled
[    0.684213] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.684216] ima: Allocated hash algorithm: sha1
[    0.684228] evm: HMAC attrs: 0x1
[    0.684626]   Magic number: 11:553:1005
[    0.684653] input input2: hash matches
[    0.684672] pnp 00:07: hash matches
[    0.684682] acpi INT3397:00: hash matches
[    0.684730] memory memory44: hash matches
[    0.684781] rtc_cmos 00:02: setting system clock to 2019-03-12 21:57:24 UTC (1552427844)
[    0.684825] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.684825] EDD information not available.
[    0.690399] random: crng init done
[    0.942172] irq 16: nobody cared (try booting with the "irqpoll" option)
[    0.942175] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-46-generic #49-Ubuntu
[    0.942176] Hardware name: Gigabyte Technology Co., Ltd. Z97P-D3/Z97P-D3, BIOS F7 04/22/2015
[    0.942176] Call Trace:
[    0.942177]  <IRQ>
[    0.942182]  dump_stack+0x63/0x8b
[    0.942185]  __report_bad_irq+0x35/0xc0
[    0.942187]  note_interrupt+0x24b/0x2a0
[    0.942189]  handle_irq_event_percpu+0x54/0x80
[    0.942190]  handle_irq_event+0x3b/0x60
[    0.942192]  handle_fasteoi_irq+0x75/0x130
[    0.942193]  handle_irq+0x20/0x30
[    0.942195]  do_IRQ+0x4e/0xd0
[    0.942198]  common_interrupt+0x84/0x84
[    0.942198]  </IRQ>
[    0.942201] RIP: 0010:__change_page_attr+0x821/0xbe0
[    0.942202] RSP: 0018:ffffb6ed80c7fc30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
[    0.942203] RAX: ffffffff93800000 RBX: 8000000000000000 RCX: 0000000000040000
[    0.942204] RDX: ffffffff944031d1 RSI: 0000000000000000 RDI: 80000001000000e3
[    0.942205] RBP: ffffb6ed80c7fcd8 R08: 00000000fff00001 R09: 00003ffffffff000
[    0.942205] R10: 0000000000000000 R11: 0000000000000000 R12: ffff886f78f36000
[    0.942206] R13: 0000000000138f36 R14: 80000000000000e3 R15: 80000000000000e3
[    0.942207]  ? 0xffffffff93800000
[    0.942209]  ? 0xffffffff93800000
[    0.942211]  __change_page_attr_set_clr+0x6b/0x2d0
[    0.942212]  ? 0xffffffff93800000
[    0.942213]  __change_page_attr_set_clr+0x2a2/0x2d0
[    0.942215]  change_page_attr_set_clr+0x154/0x3e0
[    0.942217]  set_memory_rw+0x29/0x30
[    0.942219]  free_init_pages+0x5c/0x90
[    0.942220]  ? rest_init+0xb0/0xb0
[    0.942222]  free_initmem+0x28/0x30
[    0.942223]  kernel_init+0x1d/0x110
[    0.942225]  ret_from_fork+0x35/0x40
[    0.942226] handlers:
[    0.942230] [<00000000b0d337e1>] usb_hcd_irq
[    0.942231] Disabling IRQ #16
[    0.956000] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.975995] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.979996] usb 3-6: new full-speed USB device number 2 using xhci_hcd
[    1.085154] Freeing unused kernel memory: 2408K
[    1.091983] Write protecting the kernel read-only data: 20480k
[    1.092827] Freeing unused kernel memory: 2008K
[    1.095848] Freeing unused kernel memory: 1892K
[    1.100485] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.100485] x86/mm: Checking user space page tables
[    1.105022] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.130011] usb 3-6: New USB device found, idVendor=046d, idProduct=c534
[    1.130013] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.130014] usb 3-6: Product: USB Receiver
[    1.130015] usb 3-6: Manufacturer: Logitech
[    1.136280] usb 2-1: New USB device found, idVendor=8087, idProduct=8001
[    1.136282] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.136423] hub 2-1:1.0: USB hub found
[    1.136526] hub 2-1:1.0: 8 ports detected
[    1.159118] hidraw: raw HID events driver (C) Jiri Kosina
[    1.164332] usbcore: registered new interface driver usbhid
[    1.164332] usbhid: USB HID core driver
[    1.186947] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.186955] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.187455] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x000000006eb1ee0c, fc:aa:14:c9:3c:1f, XID 0c900800 IRQ 25
[    1.187456] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.188904] ahci 0000:00:1f.2: version 3.0
[    1.189052] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2a impl SATA mode
[    1.189054] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    1.210134] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.210516] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C534.0001/input/input3
[    1.212531] scsi host0: ahci
[    1.212646] scsi host1: ahci
[    1.212741] scsi host2: ahci
[    1.212800] scsi host3: ahci
[    1.212857] scsi host4: ahci
[    1.212911] scsi host5: ahci
[    1.212934] ata1: DUMMY
[    1.212936] ata2: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19180 irq 26
[    1.212936] ata3: DUMMY
[    1.212938] ata4: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19280 irq 26
[    1.212938] ata5: DUMMY
[    1.212940] ata6: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19380 irq 26
[    1.268123] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-6/input0
[    1.268305] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C534.0002/input/input4
[    1.328145] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input1
[    1.526886] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.526899] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.526911] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.527694] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.527696] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.527697] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.528282] ata6.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max UDMA/100
[    1.528284] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.529116] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.529118] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.529120] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.529272] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224FB, SB00, max UDMA/100
[    1.529651] ata6.00: configured for UDMA/100
[    1.530199] ata2.00: configured for UDMA/100
[    1.531693] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224FB  SB00 PQ: 0 ANSI: 5
[    1.542982] ata4.00: ATA-8: KINGSTON SV300S37A120G, 600ABBF0, max UDMA/133
[    1.542983] ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.548778] ata4.00: configured for UDMA/133
[    1.563958] tsc: Refined TSC clocksource calibration: 3199.997 MHz
[    1.563962] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e204719c91, max_idle_ns: 440795261699 ns
[    1.591775] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.591776] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.591851] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.591887] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.592007] scsi 3:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[    1.592096] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.592153] sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.592160] sd 3:0:0:0: [sda] Write Protect is off
[    1.592161] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.592171] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.592365] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08M 1A01 PQ: 0 ANSI: 5
[    1.592450] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.592451] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    1.592456] sd 5:0:0:0: [sdb] Write Protect is off
[    1.592457] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.592466] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.592608] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    1.593276]  sda: sda1 sda2
[    1.593455] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.603964] usb 1-1: New USB device found, idVendor=8087, idProduct=8009
[    1.603966] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.606014]  sdb: sdb1 sdb2
[    1.606346] sd 5:0:0:0: [sdb] Attached SCSI disk
[    1.708035] hub 1-1:1.0: USB hub found
[    1.811978] hub 1-1:1.0: 6 ports detected
[    2.588117] clocksource: Switched to clocksource tsc
[    2.681233] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.771648] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.830640] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.848336] systemd[1]: Detected architecture x86-64.
[    2.849808] systemd[1]: Set hostname to <maison>.
[    2.937239] systemd[1]: Created slice System Slice.
[    2.937335] systemd[1]: Listening on udev Control Socket.
[    2.937376] systemd[1]: Listening on Syslog Socket.
[    2.937403] systemd[1]: Listening on udev Kernel Socket.
[    2.937509] systemd[1]: Created slice User and Session Slice.
[    2.937556] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.937681] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.961696] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    2.970156] lp: driver loaded but no devices found
[    2.982933] ppdev: user-space parallel port driver
[    2.985470] parport_pc 00:07: reported by Plug and Play ACPI
[    2.985530] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[    3.022432] systemd-journald[238]: Received request to flush runtime journal from PID 1
[    3.053095] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    3.084015] lp0: using parport0 (interrupt-driven).
[    3.480659] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.487494] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
[    3.487499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.487502] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    3.487505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.487505] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[    3.487508] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    3.487511] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.487511] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[    3.487514] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[    3.487516] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.487517] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.497789] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    3.497947] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    3.525602] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.525604] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.525606] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.525606] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
[    3.525607] snd_hda_codec_realtek hdaudioC1D2:    dig-out=0x11/0x0
[    3.525608] snd_hda_codec_realtek hdaudioC1D2:    inputs:
[    3.525610] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x19
[    3.525611] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x18
[    3.525612] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
[    3.557135] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[    3.557185] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[    3.557224] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[    3.557262] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    3.557298] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    3.557508] [drm] Memory usable by graphics device = 2048M
[    3.557510] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    3.557511] fb: switching to inteldrmfb from EFI VGA
[    3.557534] Console: switching to colour dummy device 80x25
[    3.559186] [drm] Replacing VGA console driver
[    3.565278] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.565279] [drm] Driver supports precise vblank timestamp query.
[    3.567726] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.570929] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    3.572120] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.572414] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    3.601532] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.601534] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.601534] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.601535] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.601535] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.689134] intel_rapl: Found RAPL domain package
[    3.689135] intel_rapl: Found RAPL domain core
[    3.689136] intel_rapl: Found RAPL domain uncore
[    3.689137] intel_rapl: Found RAPL domain dram
[    3.770549] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.971757] fbcon: inteldrmfb (fb0) is primary device
[    3.971847] Console: switching to colour frame buffer device 240x67
[    3.971870] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.012257] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    4.012296] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    4.012326] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    4.012355] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    4.012385] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    4.556019] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    4.571509] audit: type=1400 audit(1552427848.379:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=637 comm="apparmor_parser"
[    4.571513] audit: type=1400 audit(1552427848.379:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser"
[    4.571515] audit: type=1400 audit(1552427848.379:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=637 comm="apparmor_parser"
[    4.571517] audit: type=1400 audit(1552427848.379:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
[    4.573127] audit: type=1400 audit(1552427848.383:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=640 comm="apparmor_parser"
[    4.573129] audit: type=1400 audit(1552427848.383:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=640 comm="apparmor_parser"
[    4.573130] audit: type=1400 audit(1552427848.383:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=640 comm="apparmor_parser"
[    4.574158] audit: type=1400 audit(1552427848.383:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=641 comm="apparmor_parser"
[    4.574903] audit: type=1400 audit(1552427848.383:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=642 comm="apparmor_parser"
[    4.607384] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    4.992915] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    5.137334] r8169 0000:02:00.0 enp2s0: link down
[    5.137349] r8169 0000:02:00.0 enp2s0: link down
[    5.137754] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    8.057905] r8169 0000:02:00.0 enp2s0: link up
[    8.057913] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   18.059032] rfkill: input handler disabled
[   27.544838] kauditd_printk_skb: 33 callbacks suppressed
[   27.544840] audit: type=1107 audit(1552427871.355:44): pid=740 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=1696 label="snap.chromium.chromium"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   35.947941] audit: type=1400 audit(1552427879.757:45): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c99:0" pid=1696 comm="TaskSchedulerFo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   35.964682] audit: type=1400 audit(1552427879.773:46): apparmor="DENIED" operation="open" profile="snap.chromium.chromium" name="/run/udev/data/c6:0" pid=1696 comm="TaskSchedulerFo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

36 au lieu de 94... Quand même ^^


L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]

~ Ubuntu 18.04 64 bits ~

Hors ligne

#8 Le 13/03/2019, à 00:08

fgi

Re : [Résolu]Temps de démarrage 18.04

xubu1957 a écrit :

Pour les snaps :

Le 24/11/2018, nany a écrit :

Mais d’abord les snaps.

Francoisph a écrit :

J'ai repéré les snaps mais je en sais tj pas à quoi ça sert, j'ai compris qu'en faisant snap remove on se débarrasse des snaps désactivés. A quoi ça sert ? à gagner de la place.

Oui, ça sert à gagner de la place.
Copie cette longue ligne de commandes (tu devra saisir ton mot de passe plusieurs fois mais je n’ai pas trouvé mieux) :

snap list --all | awk 'BEGIN {print "#! /bin/sh\n"} ; /désactivé/ {print "snap remove "$1" --revision "$3"\n"} ; END {print "exit 0"}' > script && chmod +x script && ./script && rm script && echo && snap list --all && echo && df -Th

Puis donne le retour.

fournie dans > Bugue libreoffice

Et stockée dans > |RESOLU] snap nettoyage des versions désactivées.


Merci. Je ne pense pas que ça accélère le démarrage, mais ça nettoie les disques... et puis ça fait réviser le mot de passe root big_smile


L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]

~ Ubuntu 18.04 64 bits ~

Hors ligne

#9 Le 13/03/2019, à 00:14

f.x0

Re : [Résolu]Temps de démarrage 18.04

Bonjour fgi,

tu peux aussi essayer ceci :

sudo systemctl disable plymouth-quit-wait.service
sudo systemctl disable NetworkManager-wait-online.service
sudo systemctl disable apt-daily.service
sudo systemctl mask apt-daily.service

redémarres le PC
puis postes le retour de

systemd-analyze

et de

systemd-analyze blame

SOPI

Hors ligne

#10 Le 13/03/2019, à 01:00

fgi

Re : [Résolu]Temps de démarrage 18.04

Merci,

J'ai passé les 2 premières commandes uniquement, parce que l'apt-daily, je l'ai désactivé dans Synaptic.

J'ai bien raccourci la séquence dans dmesg et le systemd-analyse blame donne moins de temps de latence, même si Plymouth continue à tourner.

$ systemd-analyze blame
          5.287s nmbd.service
          3.481s plymouth-quit-wait.service
          1.351s dev-sda2.device
           901ms snapd.service
           640ms dev-loop8.device
           573ms dev-loop9.device
           561ms dev-loop0.device
           555ms dev-loop2.device
           528ms dev-loop3.device
           523ms dev-loop4.device
           522ms dev-loop6.device

J'en suis à 20 secondes avant d'arriver à l'écran de login, et 15 secondes après. C'est donc beaucoup mieux !!

Merci à tous smile

Dernière modification par fgi (Le 13/03/2019, à 01:03)


L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]

~ Ubuntu 18.04 64 bits ~

Hors ligne

#11 Le 13/03/2019, à 01:06

f.x0

Re : [Résolu]Temps de démarrage 18.04

Pour plymouth
tu peux refaire

sudo systemctl disable plymouth-quit-wait.service

puis

sudo systemctl mask plymouth-quit-wait.service

SOPI

Hors ligne

#12 Le 13/03/2019, à 01:20

fgi

Re : [Résolu]Temps de démarrage 18.04

Et au passage, aurais tu des infos récentes (j'insiste) sur la config de plymouth et des splash screen ? Parceque tout ce que je trouve est pour la 16.04 ou avant hmm

J'ai tenté de mettre solar, mais j'ai toujours les écrans violets avant et après....

Merci smile


L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]

~ Ubuntu 18.04 64 bits ~

Hors ligne

#13 Le 13/03/2019, à 02:07

f.x0

Re : [Résolu]Temps de démarrage 18.04

Non, mais dans la Doc il est précisé a_partir_d_ubuntu_1604.
Tu as essayé ???

Dernière modification par f.x0 (Le 13/03/2019, à 02:08)


SOPI

Hors ligne

#14 Le 15/03/2019, à 00:38

fgi

Re : [Résolu]Temps de démarrage 18.04

f.x0 a écrit :

Non, mais dans la Doc il est précisé a_partir_d_ubuntu_1604.
Tu as essayé ???

Oui, mais ça ne donne pas le résultat escompté... Pas grave, je vais farfouiller encore un peu et je ferais un post spécifique si besoin ;-)

Merci !


L'homme ne recherche pas La Vérité. Il n'est qu'avide de certitude ... [Cornélius Castoriadis]

~ Ubuntu 18.04 64 bits ~

Hors ligne