Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 18/03/2019, à 15:04

kaiki

[RESOLU] pc problèmes avec live usb ubuntu et pas clé windows

Bonjour,
Il y a deux ans, mon portable sous ubuntu 16.4 à arrêté de fonctionner, il démarrait puis s' éteignait. J' ai voulu réinstaller complètement mais l' écran s' allumait puis s' arrêtait. J' ai fait des tentatives innombrables pour réinstallé, mais rien. J' ai donc acheté un nouveau pc qui fonctionne maintenant impeccable. Ce jour, je reprend ce portable qui est toujours nickel et à tout hasard, refais un essai. Même topo, l' écran devient noir avec quelques lignes en code.
Avant de supprimer windows 10 de mon nouveau pc, j' ai fait une clé de récupération. Par hasard, je branche cette clé. Surprise, le processus fonctionne et l' écran ne s' éteint plus. Il ne peut malgré tout pas s' installer car les partitions ne sont pas en NTFS. Forcément puisque c' était ubuntu dessus. Néanmoins, je me pose la question de savoir pourquoi les clés ubuntu stoppent le pc et pas windows.
Que faire? Ce pc n' est manifestement pas HS.
Merçi

Dernière modification par kaiki (Le 20/03/2019, à 11:52)


Pc: Lenovo ideacentre A10-300-23 ISU depuis 07/06/2017
Utilisateur Windows depuis 3.1>3.11>95>98>xp>Vista
Sur ubuntu  depuis le 18/07/2010.

Hors ligne

#2 Le 19/03/2019, à 08:42

CRIMA

Re : [RESOLU] pc problèmes avec live usb ubuntu et pas clé windows

Bonjour

D'après ce que vous dites, votre Ubuntu à dû arrêter de fonctionner convenablement après une mise à jour avec changement de noyau.

Si votre Ubuntu est toujours présent dans le PC :
Essayez de démarrer en choisissant la deuxième ligne du ménu Grub (si Grub apparait) et en démarrant sur un noyau antérieur.

Si vous devez réinstaller vous devrez tenter en activant les options "nomodeset", voir "noapic" sur l'écran de choix "essayez Ubuntu sans l'installer" (en général F6 comme indiqué en bas de l'écran)

Salutations


Ordi HP Z200 - Processeur Intel I3 - chipset graphique IntelHD - 8 Go ram -

Hors ligne

#3 Le 20/03/2019, à 11:55

kaiki

Re : [RESOLU] pc problèmes avec live usb ubuntu et pas clé windows

Je suis parvenu après maintes manipulations à installer xubuntu ( que je n'aime pas). Ce pc est-il devenu obsolète pour un linux actuel? (alors que le 16.4 fonctionnait nickel)


Pc: Lenovo ideacentre A10-300-23 ISU depuis 07/06/2017
Utilisateur Windows depuis 3.1>3.11>95>98>xp>Vista
Sur ubuntu  depuis le 18/07/2010.

Hors ligne

#4 Le 20/03/2019, à 13:24

malbo

Re : [RESOLU] pc problèmes avec live usb ubuntu et pas clé windows

Bonjour,
Puisque tu es parvenu à installer Xubuntu, je te prie de faire un Boot-Info depuis une session de ce Xubuntu fraîchement installé et de donner l'URL de ce Boot-Info dans ta réponse.

Hors ligne

#5 Le 21/03/2019, à 11:49

kaiki

Re : [RESOLU] pc problèmes avec live usb ubuntu et pas clé windows

Bonjour,
Entretemps, n' aimant pas xubuntu, j' ai retenté ubuntu, pas moyen. J' ai donc tenté avec LinuxMint cinamon 19.01 et là, tout est parfait , clé acceptée et installation parfaite ainsi que les mises à jours.
Mais enfin, cela n' est pas ubuntu .  J' ai donc fait le boot info via linuxMint. Voici;
http://paste.ubuntu.com /p/2bYSB9vyy3/
Merçi à vous,

Dernière modification par kaiki (Le 21/03/2019, à 11:56)


Pc: Lenovo ideacentre A10-300-23 ISU depuis 07/06/2017
Utilisateur Windows depuis 3.1>3.11>95>98>xp>Vista
Sur ubuntu  depuis le 18/07/2010.

Hors ligne

#6 Le 21/03/2019, à 11:54

kaiki

Re : [RESOLU] pc problèmes avec live usb ubuntu et pas clé windows

Erreur : url boot menu :  http://paste.ubuntu.com/p/2bYSB9vyy3/


Pc: Lenovo ideacentre A10-300-23 ISU depuis 07/06/2017
Utilisateur Windows depuis 3.1>3.11>95>98>xp>Vista
Sur ubuntu  depuis le 18/07/2010.

Hors ligne

#7 Le 21/03/2019, à 12:11

malbo

Re : [RESOLU] pc problèmes avec live usb ubuntu et pas clé windows

Ton Boot-Info est là :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 19.1
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   625,141,759   625,139,712  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        1c6608a6-64ba-450b-a252-ce58b63d3c63   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Mar 21 11:40 ata-SAMSUNG_HM320JI_S1HQJD0QA09313 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 21 11:40 ata-SAMSUNG_HM320JI_S1HQJD0QA09313-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Mar 21 11:32 ata-TSSTcorp_CDDVDW_TS-L633A -> ../../sr0
lrwxrwxrwx 1 root root  9 Mar 21 11:40 wwn-0x50f0000001109313 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 21 11:40 wwn-0x50f0000001109313-part1 -> ../../sda1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  1c6608a6-64ba-450b-a252-ce58b63d3c63
else
  search --no-floppy --fs-uuid --set=root 1c6608a6-64ba-450b-a252-ce58b63d3c63
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_BE
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Linux Mint 19.1 Cinnamon' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1c6608a6-64ba-450b-a252-ce58b63d3c63' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  1c6608a6-64ba-450b-a252-ce58b63d3c63
	else
	  search --no-floppy --fs-uuid --set=root 1c6608a6-64ba-450b-a252-ce58b63d3c63
	fi
        linux	/boot/vmlinuz-4.15.0-46-generic root=UUID=1c6608a6-64ba-450b-a252-ce58b63d3c63 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-46-generic
}
submenu 'Options avancées pour Linux Mint 19.1 Cinnamon' $menuentry_id_option 'gnulinux-advanced-1c6608a6-64ba-450b-a252-ce58b63d3c63' {
	menuentry 'Linux Mint 19.1 Cinnamon, avec Linux 4.15.0-46-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-46-generic-advanced-1c6608a6-64ba-450b-a252-ce58b63d3c63' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  1c6608a6-64ba-450b-a252-ce58b63d3c63
		else
		  search --no-floppy --fs-uuid --set=root 1c6608a6-64ba-450b-a252-ce58b63d3c63
		fi
		echo	'Chargement de Linux 4.15.0-46-generic…'
	        linux	/boot/vmlinuz-4.15.0-46-generic root=UUID=1c6608a6-64ba-450b-a252-ce58b63d3c63 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-46-generic
	}
	menuentry 'Linux Mint 19.1 Cinnamon, with Linux 4.15.0-46-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-46-generic-recovery-1c6608a6-64ba-450b-a252-ce58b63d3c63' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  1c6608a6-64ba-450b-a252-ce58b63d3c63
		else
		  search --no-floppy --fs-uuid --set=root 1c6608a6-64ba-450b-a252-ce58b63d3c63
		fi
		echo	'Chargement de Linux 4.15.0-46-generic…'
	        linux	/boot/vmlinuz-4.15.0-46-generic root=UUID=1c6608a6-64ba-450b-a252-ce58b63d3c63 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-46-generic
	}
	menuentry 'Linux Mint 19.1 Cinnamon, avec Linux 4.15.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-advanced-1c6608a6-64ba-450b-a252-ce58b63d3c63' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  1c6608a6-64ba-450b-a252-ce58b63d3c63
		else
		  search --no-floppy --fs-uuid --set=root 1c6608a6-64ba-450b-a252-ce58b63d3c63
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=1c6608a6-64ba-450b-a252-ce58b63d3c63 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
	menuentry 'Linux Mint 19.1 Cinnamon, with Linux 4.15.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-recovery-1c6608a6-64ba-450b-a252-ce58b63d3c63' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  1c6608a6-64ba-450b-a252-ce58b63d3c63
		else
		  search --no-floppy --fs-uuid --set=root 1c6608a6-64ba-450b-a252-ce58b63d3c63
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=1c6608a6-64ba-450b-a252-ce58b63d3c63 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  1c6608a6-64ba-450b-a252-ce58b63d3c63
	else
	  search --no-floppy --fs-uuid --set=root 1c6608a6-64ba-450b-a252-ce58b63d3c63
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  1c6608a6-64ba-450b-a252-ce58b63d3c63
	else
	  search --no-floppy --fs-uuid --set=root 1c6608a6-64ba-450b-a252-ce58b63d3c63
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=1c6608a6-64ba-450b-a252-ce58b63d3c63 /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 280.201217651 = 300.863766528  boot/grub/grub.cfg                             1
 286.314456940 = 307.427807232  boot/grub/i386-pc/core.img                     1
 280.195476532 = 300.857602048  boot/vmlinuz-4.15.0-20-generic                 1
   6.925979614 = 7.436713984    boot/vmlinuz-4.15.0-46-generic                 1
   6.925979614 = 7.436713984    vmlinuz                                        1
 280.195476532 = 300.857602048  vmlinuz.old                                    1
   7.176353455 = 7.705550848    boot/initrd.img-4.15.0-20-generic              2
   7.354003906 = 7.896301568    boot/initrd.img-4.15.0-46-generic              1
   7.354003906 = 7.896301568    initrd.img                                     1
   7.176353455 = 7.705550848    initrd.img.old                                 2

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/4307/mountinfo) leaked on lvs invocation. Parent PID 11716: bash
File descriptor 63 (pipe:[54852]) leaked on lvs invocation. Parent PID 11716: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20190321_1140 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version :
glade2script version : 3.2.3~ppa4
File descriptor 9 (/proc/4307/mountinfo) leaked on lvs invocation. Parent PID 5911: /bin/sh
boot-info is executed in installed-session (Linux Mint 19.1 Tessa, tessa, LinuxMint, i686)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=1c6608a6-64ba-450b-a252-ce58b63d3c63 ro quiet splash vt.handoff=1

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Linux Mint 19.1 Tessa CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="1c6608a6-64ba-450b-a252-ce58b63d3c63" TYPE="ext4" PARTUUID="d2d0c29d-01"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 mar 20 16:16 grub.d
total 80
-rwxr-xr-x 1 root root 10046 fév  8 00:20 00_header
-rwxr-xr-x 1 root root  6258 jui 13  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 nov  8 16:53 10_linux
-rwxr-xr-x 1 root root 11298 nov  8 16:53 20_linux_xen
-rwxr-xr-x 1 root root  1992 jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 nov  8 16:53 30_os-prober
-rwxr-xr-x 1 root root  1418 nov  8 16:53 30_uefi-firmware
-rwxr-xr-x 1 root root   214 nov  8 16:53 40_custom
-rwxr-xr-x 1 root root   216 nov  8 16:53 41_custom
-rw-r--r-- 1 root root   483 nov  8 16:53 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not EFI-compatible.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:320GB:scsi:512:512:msdos:ATA SAMSUNG HM320JI:;
1:1049kB:320GB:320GB:ext4::boot;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        298,1G
sda1  part ext4   298,1G
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=2037892k,nr_inodes=198977,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=413168k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14601)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=413164k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.0G     0  2.0G   0% /dev
tmpfs          tmpfs     404M  1.4M  403M   1% /run
/dev/sda1      ext4      293G  8.6G  269G   4% /
tmpfs          tmpfs     2.0G   43M  2.0G   3% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     2.0G     0  2.0G   0% /sys/fs/cgroup
tmpfs          tmpfs     404M   16K  404M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd2d0c29d

Device     Boot Start       End   Sectors   Size Id Type
/dev/sda1  *     2048 625141759 625139712 298.1G 83 Linux




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Linux Mint 19.1 Tessa] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.




pastebinit  packages needed
Gtk-Message: 11:41:02.145: GtkDialog mapped without a transient parent. This is discouraged.
paste2.org ko (http://paste2.org/)

L'installation est parfaite. Je ne peux pas croire que Ubuntu 18.04 ne pouvait pas tourner dans ton ordi alors que LinuxMint cinamon 19.01 - basé sur Ubuntu 18.04.1 - tourne parfaitement. Je crois plus volontiers que tu n'avais pas tout pour réussir quand tu as tenté l'install de Ubuntu (peut-être une LiveUSB non-fonctionnelle ?)

Hors ligne

#8 Le 21/03/2019, à 12:29

kaiki

Re : [RESOLU] pc problèmes avec live usb ubuntu et pas clé windows

Je ne comprend pas, j' ai utilisé cette même clé pour l' installer sur mon nouveau pc. Enfin, comme Mint fonctionne, prend plus de risques.
Je te remercie pour m' avoir répondu.


Pc: Lenovo ideacentre A10-300-23 ISU depuis 07/06/2017
Utilisateur Windows depuis 3.1>3.11>95>98>xp>Vista
Sur ubuntu  depuis le 18/07/2010.

Hors ligne