Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 02/04/2019, à 20:53

hanki

Problème de reconnaissance de mon stylet (wacom bamboo) cth-460

Bonjour à tous;
c'est mon premier post et je suis un débutant absolu sur ubuntu, j'ai pris le temps de regarder sur le forum si il y avait une solution à mon problème mais le seul problème semblable n'a pas trouver de solution.
Sinon tout est dans le titre, je peux configurer les boutons de ma tablette (sauf un d'ailleurs alors qu'il fonctionne) et surtout la page dédiée au stylet me dit qu'il n'en trouve pas.
précision: je suis sur la version 18.04
merci par avance!

Hors ligne

#2 Le 02/04/2019, à 20:54

jeange

Re : Problème de reconnaissance de mon stylet (wacom bamboo) cth-460

Bonjour,
C'est bien une CTH-460 avec quel logiciel est-elle utilisée, Gimp ou autre ?

Dernière modification par jeange (Le 02/04/2019, à 20:56)


PCLF CLEVO W670SZQ  SSD 480Go  i3  Ram 12Go  Haswell HD4600 Ubuntu 20.04.6 et 22.04.3 LTS 64bit
033 V nospE  03.01.2 pmiG
Merci de donner les retours avec les balises < > et les allers avec les valises, et toujours pas de raton laveur.
%NOINDEX%

Hors ligne

#3 Le 02/04/2019, à 21:04

jeange

Re : Problème de reconnaissance de mon stylet (wacom bamboo) cth-460

Quels sont les retours complets de:

 dpkg -l | grep xserver-xorg-input-wacom

et

xsetwacom --list devices

et

 xsetwacom --list parameters

PCLF CLEVO W670SZQ  SSD 480Go  i3  Ram 12Go  Haswell HD4600 Ubuntu 20.04.6 et 22.04.3 LTS 64bit
033 V nospE  03.01.2 pmiG
Merci de donner les retours avec les balises < > et les allers avec les valises, et toujours pas de raton laveur.
%NOINDEX%

Hors ligne

#4 Le 03/04/2019, à 09:32

hanki

Re : Problème de reconnaissance de mon stylet (wacom bamboo) cth-460

Bonjour Jeange!

Alors perso j'utilise krita mais le probleme se situe en amont dans le menu de configuration.

hanki@hanki-desktop:~$ dpkg -l | grep xserver-xorg-input-wacom
ii  xserver-xorg-input-wacom-hwe-18.04         1:0.36.1-0ubuntu1~18.04.1                    amd64        X.Org X server -- Wacom input driver

ensuite:
acom Bamboo 2FG 4x5 Pen stylus     id: 8    type: STYLUS   
Wacom Bamboo 2FG 4x5 Pen eraser     id: 9    type: ERASER   
Wacom Bamboo 2FG 4x5 Pad pad        id: 10    type: PAD       
Wacom Bamboo 2FG 4x5 Finger touch    id: 16    type: TOUCH

enfin:
Area             - Valid tablet area in device coordinates.
Button           - X11 event to which the given button should be mapped.
ToolDebugLevel   - Level of debugging trace for individual tools (default is 0 [off]).
TabletDebugLevel - Level of debugging statements applied to shared code paths between all tools associated with the same tablet (default is 0 [off]).
Suppress         - Number of points trimmed (default is 2).
RawSample        - Number of raw data used to filter the points (default is 4).
PressureCurve    - Bezier curve for pressure (default is 0 0 100 100 [linear]).
Mode             - Switches cursor movement mode (default is absolute).
TabletPCButton   - Turns on/off Tablet PC buttons (default is off for regular tablets, on for Tablet PC).
Touch            - Turns on/off Touch events (default is on).
HWTouchSwitchState - Touch events turned on/off by hardware switch.
Gesture          - Turns on/off multi-touch gesture events (default is on).
ZoomDistance     - Minimum distance for a zoom gesture (default is 50).
ScrollDistance   - Minimum motion before sending a scroll gesture (default is 20).
TapTime          - Minimum time between taps for a right click (default is 250).
CursorProximity  - Sets cursor distance for proximity-out in distance from the tablet (default is 10 for Intuos series, 42 for Graphire series).
Rotate           - Sets the rotation of the tablet. Values = none, cw, ccw, half (default is none).
RelWheelUp       - X11 event to which relative wheel up should be mapped.
RelWheelDown     - X11 event to which relative wheel down should be mapped.
AbsWheelUp       - X11 event to which absolute wheel up should be mapped.
AbsWheelDown     - X11 event to which absolute wheel down should be mapped.
AbsWheel2Up      - X11 event to which absolute wheel up should be mapped.
AbsWheel2Down    - X11 event to which absolute wheel down should be mapped.
StripLeftUp      - X11 event to which left strip up should be mapped.
StripLeftDown    - X11 event to which left strip down should be mapped.
StripRightUp     - X11 event to which right strip up should be mapped.
StripRightDown   - X11 event to which right strip down should be mapped.
Threshold        - Sets tip/eraser pressure threshold (default is 27).
ResetArea        - Resets the bounding coordinates to default in tablet units.
ToolType         - Returns the tool type of the associated device.
ToolSerial       - Returns the serial number of the current device in proximity.
ToolID           - Returns the tool ID of the current tool in proximity.
ToolSerialPrevious - Returns the serial number of the previous device in proximity.
BindToSerial     - Binds this device to the serial number.
TabletID         - Returns the tablet ID of the associated device.
PressureRecalibration - Turns on/off Tablet pressure recalibration
PanScrollThreshold - Adjusts distance required for pan actions to generate a scroll event
MapToOutput      - Map the device to the given output.
all              - Get value for all parameters.

Hors ligne

#5 Le 03/04/2019, à 10:06

jeange

Re : Problème de reconnaissance de mon stylet (wacom bamboo) cth-460

OK pour krita et merci d'utiliser les balises code pour les retours complets ICI: https://forum.ubuntu-fr.org/viewtopic.php?id=1614731


PCLF CLEVO W670SZQ  SSD 480Go  i3  Ram 12Go  Haswell HD4600 Ubuntu 20.04.6 et 22.04.3 LTS 64bit
033 V nospE  03.01.2 pmiG
Merci de donner les retours avec les balises < > et les allers avec les valises, et toujours pas de raton laveur.
%NOINDEX%

Hors ligne

#6 Le 03/04/2019, à 10:12

xubu1957

Re : Problème de reconnaissance de mon stylet (wacom bamboo) cth-460

Bonjour,

Pour ajouter toi-même les balises code à ton précédent message #4 :

  • Cliquer sur  le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message

1530289742.png


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#7 Le 03/04/2019, à 10:42

hanki

Re : Problème de reconnaissance de mon stylet (wacom bamboo) cth-460

ok ok, alors attends sans modifier le précédent je vais tenter de le faire à nouveau:

hanki@hanki-desktop:~$  dpkg -l | grep xserver-xorg-input-wacom
ii  xserver-xorg-input-wacom-hwe-18.04         1:0.36.1-0ubuntu1~18.04.1                    amd64        X.Org X server -- Wacom input driver
hanki@hanki-desktop:~$ 
hanki@hanki-desktop:~$ xsetwacom --list devices
Wacom Bamboo 2FG 4x5 Pen stylus 	id: 8	type: STYLUS    
Wacom Bamboo 2FG 4x5 Pen eraser 	id: 9	type: ERASER    
Wacom Bamboo 2FG 4x5 Pad pad    	id: 10	type: PAD       
Wacom Bamboo 2FG 4x5 Finger touch	id: 16	type: TOUCH     
hanki@hanki-desktop:~$ 
hanki@hanki-desktop:~$  xsetwacom --list parameters
Area             - Valid tablet area in device coordinates. 
Button           - X11 event to which the given button should be mapped. 
ToolDebugLevel   - Level of debugging trace for individual tools (default is 0 [off]). 
TabletDebugLevel - Level of debugging statements applied to shared code paths between all tools associated with the same tablet (default is 0 [off]). 
Suppress         - Number of points trimmed (default is 2). 
RawSample        - Number of raw data used to filter the points (default is 4). 
PressureCurve    - Bezier curve for pressure (default is 0 0 100 100 [linear]). 
Mode             - Switches cursor movement mode (default is absolute). 
TabletPCButton   - Turns on/off Tablet PC buttons (default is off for regular tablets, on for Tablet PC). 
Touch            - Turns on/off Touch events (default is on). 
HWTouchSwitchState - Touch events turned on/off by hardware switch. 
Gesture          - Turns on/off multi-touch gesture events (default is on). 
ZoomDistance     - Minimum distance for a zoom gesture (default is 50). 
ScrollDistance   - Minimum motion before sending a scroll gesture (default is 20). 
TapTime          - Minimum time between taps for a right click (default is 250). 
CursorProximity  - Sets cursor distance for proximity-out in distance from the tablet (default is 10 for Intuos series, 42 for Graphire series). 
Rotate           - Sets the rotation of the tablet. Values = none, cw, ccw, half (default is none). 
RelWheelUp       - X11 event to which relative wheel up should be mapped. 
RelWheelDown     - X11 event to which relative wheel down should be mapped. 
AbsWheelUp       - X11 event to which absolute wheel up should be mapped. 
AbsWheelDown     - X11 event to which absolute wheel down should be mapped. 
AbsWheel2Up      - X11 event to which absolute wheel up should be mapped. 
AbsWheel2Down    - X11 event to which absolute wheel down should be mapped. 
StripLeftUp      - X11 event to which left strip up should be mapped. 
StripLeftDown    - X11 event to which left strip down should be mapped. 
StripRightUp     - X11 event to which right strip up should be mapped. 
StripRightDown   - X11 event to which right strip down should be mapped. 
Threshold        - Sets tip/eraser pressure threshold (default is 27). 
ResetArea        - Resets the bounding coordinates to default in tablet units. 
ToolType         - Returns the tool type of the associated device. 
ToolSerial       - Returns the serial number of the current device in proximity.
ToolID           - Returns the tool ID of the current tool in proximity.
ToolSerialPrevious - Returns the serial number of the previous device in proximity.
BindToSerial     - Binds this device to the serial number.
TabletID         - Returns the tablet ID of the associated device. 
PressureRecalibration - Turns on/off Tablet pressure recalibration
PanScrollThreshold - Adjusts distance required for pan actions to generate a scroll event
MapToOutput      - Map the device to the given output. 
all              - Get value for all parameters. 
hanki@hanki-desktop:~$ 

Hors ligne

#8 Le 03/04/2019, à 16:01

LeoMajor

Re : Problème de reconnaissance de mon stylet (wacom bamboo) cth-460

bonjour,
as-tu installé libwacom-bin libwacom2 ?
que donne ?

/usr/bin/libwacom-list-local-devices

Hors ligne

#9 Le 04/04/2019, à 00:09

hanki

Re : Problème de reconnaissance de mon stylet (wacom bamboo) cth-460

Bonsoir LeoMajor,
je n'ai rien installé; voici ce que ça donne:

hanki@hanki-desktop:~$ /usr/bin/libwacom-list-local-devices
[Device]
Name=Wacom Bamboo (2FG)
DeviceMatch=usb:056a:00d1;
Class=Bamboo
Width=6
Height=4
IntegratedIn=
Layout=bamboo-2fg-s-pt.svg
Styli=0xfffff;0xffffe;

[Features]
Reversible=true
Stylus=true
Ring=false
Ring2=false
Touch=true
TouchSwitch=false
StatusLEDs=
NumStrips=0
Buttons=4
[Buttons]
Left=A;B;C;D;
Right=
Top=
Bottom=
Touchstrip=
Touchstrip2=
OLEDs=
Ring=
Ring2=
EvdevCodes=0x111;0x116;0x115;0x110;
RingNumModes=0
Ring2NumModes=0
StripsNumModes=0

---------------------------------------------------------------
[Device]
Name=Wacom Bamboo (2FG)
DeviceMatch=usb:056a:00d1;
Class=Bamboo
Width=6
Height=4
IntegratedIn=
Layout=bamboo-2fg-s-pt.svg
Styli=0xfffff;0xffffe;

[Features]
Reversible=true
Stylus=true
Ring=false
Ring2=false
Touch=true
TouchSwitch=false
StatusLEDs=
NumStrips=0
Buttons=4
[Buttons]
Left=A;B;C;D;
Right=
Top=
Bottom=
Touchstrip=
Touchstrip2=
OLEDs=
Ring=
Ring2=
EvdevCodes=0x111;0x116;0x115;0x110;
RingNumModes=0
Ring2NumModes=0
StripsNumModes=0

---------------------------------------------------------------
[Device]
Name=Wacom Bamboo (2FG)
DeviceMatch=usb:056a:00d1;
Class=Bamboo
Width=6
Height=4
IntegratedIn=
Layout=bamboo-2fg-s-pt.svg
Styli=0xfffff;0xffffe;

[Features]
Reversible=true
Stylus=true
Ring=false
Ring2=false
Touch=true
TouchSwitch=false
StatusLEDs=
NumStrips=0
Buttons=4
[Buttons]
Left=A;B;C;D;
Right=
Top=
Bottom=
Touchstrip=
Touchstrip2=
OLEDs=
Ring=
Ring2=
EvdevCodes=0x111;0x116;0x115;0x110;
RingNumModes=0
Ring2NumModes=0
StripsNumModes=0

---------------------------------------------------------------
hanki@hanki-desktop:~$ 

Par quoi dois-je passer pour installer cette librairie?

Dernière modification par hanki (Le 04/04/2019, à 00:11)

Hors ligne