Contenu | Rechercher | Menus

Annonce

La nouvelle clé USB Ubuntu-fr est en prévente
Rendez-vous sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 14/04/2019, à 21:06

bilougris

[Réolu]votre avis sur mon hdd svp ?

bonsoiri
suite a ce post de (Malbo)
https://forum.ubuntu-fr.org/viewtopic.php?id=1988280

j'ai  testé mon disque dur l’ordinateur beaucoup d'erreurs au démarrage
fait en live cd
comme elle est déjà ancienne , je voudrais en avoir votre avis sur mon hdd

""""

 sudo  smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST500DM002-1BD142
Serial Number:    Z3TPSJEY
LU WWN Device Id: 5 000c50 064932539
Firmware Version: KC45
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Apr 14 18:38:04 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  617) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  86) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   105   099   006    Pre-fail  Always       -       534592
  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       85
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   060   060   030    Pre-fail  Always       -       1012347
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       119
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2454
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   076   070   045    Old_age   Always       -       24 (Min/Max 23/24)
194 Temperature_Celsius     0x0022   024   040   000    Old_age   Always       -       24 (0 17 0 0 0)
195 Hardware_ECC_Recovered  0x001a   050   044   000    Old_age   Always       -       534592
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       49h+55m+56.521s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       26754828
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3475925074

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        92         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

xubuntu@xubuntu:~$   

d'avance Merci

Dernière modification par bilougris (Le 15/04/2019, à 19:32)

Hors ligne

#2 Le 14/04/2019, à 21:47

moko138

Re : [Réolu]votre avis sur mon hdd svp ?

Le plateau semble sain, le reste est en vrac. En particulier :

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   105   099   006    Pre-fail  Always       -       534592
  7 Seek_Error_Rate         0x000f   060   060   030    Pre-fail  Always       -       1012347
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0

Le nombre d'heures n'est pas cohérent :

  9 Power_On_Hours       119

sauf avec

  4 Start_Stop_Count   100   100   020       85

ça arrive quand le disque est très abîmé.

D'après toi, combien ton disque a-t-il vécu de mises sous tension ?
Combien d'heures de vol a-t-il ?


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#3 Le 15/04/2019, à 08:03

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

Bonjour


c'est un ordinateur de bureau acheté sans os en mars 2014 qui a toujours tourné sous  Linux en UEFI
c'est pas du haut de gamme core i3 
""
je pense que le nombre d'heures de fonctionnement est important et  beaucoup aussi de mises sous tension                                                                 
a subit beaucoup d'installations 
Ubuntu, Xubuntu, Debian, , en fait j'ai testé, pas mal avec !!
""
chose bizarre quand je démarre normalement  l'ordinateur ,il  s'affiche un tas d’erreurs sur l'écran !

ce qui ma fait penser au disque dur
""
par contre si je boot en live cd, en UEFI  j'arrive sur le bureau sans erreurs plusieurs tests éféctués
la je fonctionne en ram
je pense que je ferais bien de changer le disque ?

   9 Power_On_Hours       119

 
c'est beaucoup  plus que cela

actuellement sur Xubuntu 18.04

Merci pour la réponse

Dernière modification par bilougris (Le 15/04/2019, à 08:26)

Hors ligne

#4 Le 15/04/2019, à 08:59

rogn...

Re : [Réolu]votre avis sur mon hdd svp ?

Salut.

J'ai eu des Seagates dans les mains, les résultats de smartctl étaient toujours bizarres sans que les disques soient mauvais. Par contre, est-ce que tu as eu des événements comme des démontages puis remontages en lecture seule du HDD ?


Rogn on GitHub
Manjaro XFCE / Xubuntu 19.10
"Je pisse sur les Pommes de riches et les mises à jour de w$ qui foirent !" (A. Vatar)

Hors ligne

#5 Le 15/04/2019, à 11:59

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

>>>>>Par contre, est-ce que tu as eu des événements comme des démontages puis remontages en lecture seule du HDD ?
""
non a partir du moment que j’arrive sur le bureau,l'ordi est stable les erreurs sur l'écran c'est uniquement pendant le boot

il s affiches pas mal d’Erreurs que je n'ai pas le temps d’interpréter

n'y a t'il pas moyen de voir dans les logs une fois connectés , je dis cela mais je ne sais pas trop ou regarder
c'est plutôt en dehors de ma compétence  !
""
je cherche  le moyen de garder cette machine fonctionnelle si possible
Merci pour la réponse

Hors ligne

#6 Le 15/04/2019, à 13:00

moko138

Re : [Réolu]votre avis sur mon hdd svp ?

Que retourne

dmesg -lerr

?


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#7 Le 15/04/2019, à 13:09

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

    ~$ dmesg -lerr
[    0.635642] Couldn't get size: 0x800000000000000e
[    1.509426] usbhid 1-1.1:1.1: can't add hid device: -32

Hors ligne

#8 Le 15/04/2019, à 13:19

moko138

Re : [Réolu]votre avis sur mon hdd svp ?

Et

dmesg | head -1000

?


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#9 Le 15/04/2019, à 13:30

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

  ~$ dmesg | head -1000
[    0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[    0.000000] Linux version 4.15.0-47-generic (buildd@lgw01-amd64-001) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #50-Ubuntu SMP Wed Mar 13 10:44:52 UTC 2019 (Ubuntu 4.15.0-47.50-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-47-generic root=UUID=f7a18fd5-2d19-4c2d-837a-a3ddabeb4bc7 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000ccdbdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ccdbe000-0x00000000cd78efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cd78f000-0x00000000cd818fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd819000-0x00000000cd8b8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd8b9000-0x00000000ce081fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ce082000-0x00000000ce0fbfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ce0fc000-0x00000000ce0fcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce0fd000-0x00000000ce13ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ce140000-0x00000000cebd0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cebd1000-0x00000000ceff1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ceff2000-0x00000000ceffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xcd89d000  ACPI 2.0=0xcd89d000  SMBIOS=0xf04c0  MPS=0xfd4c0 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H77M, BIOS P1.60 08/09/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   5 base 11F800000 mask FFF800000 uncachable
[    0.000000]   6 base 11F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 3822M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x10973f000, 0x10973ffff] PGTABLE
[    0.000000] BRK [0x109740000, 0x109740fff] PGTABLE
[    0.000000] BRK [0x109741000, 0x109741fff] PGTABLE
[    0.000000] BRK [0x109742000, 0x109742fff] PGTABLE
[    0.000000] BRK [0x109743000, 0x109743fff] PGTABLE
[    0.000000] BRK [0x109744000, 0x109744fff] PGTABLE
[    0.000000] BRK [0x109745000, 0x109745fff] PGTABLE
[    0.000000] BRK [0x109746000, 0x109746fff] PGTABLE
[    0.000000] BRK [0x109747000, 0x109747fff] PGTABLE
[    0.000000] BRK [0x109748000, 0x109748fff] PGTABLE
[    0.000000] BRK [0x109749000, 0x109749fff] PGTABLE
[    0.000000] BRK [0x10974a000, 0x10974afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337d3000-0x35be0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000CD89D000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000CD89D080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CD8A6F58 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CD89D1A0 009DB4 (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CD8B7080 000040
[    0.000000] ACPI: APIC 0x00000000CD8A7068 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CD8A70E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: ASF! 0x00000000CD8A7128 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: MCFG 0x00000000CD8A71D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CD8A7210 0007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
[    0.000000] ACPI: AAFT 0x00000000CD8A79F8 0000EA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CD8A7AE8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CD8A7B20 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000CD8A7E90 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CD8A8840 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: BGRT 0x00000000CD8A92D8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11f5d3000-0x11f5fdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000ccdbdfff]
[    0.000000]   node   0: [mem 0x00000000cd78f000-0x00000000cd818fff]
[    0.000000]   node   0: [mem 0x00000000ce0fc000-0x00000000ce0fcfff]
[    0.000000]   node   0: [mem 0x00000000ce140000-0x00000000cebd0fff]
[    0.000000]   node   0: [mem 0x00000000ceff2000-0x00000000ceffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000] Reserved but unavailable: 11130 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[    0.000000] On node 0 totalpages: 969350
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 158 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13076 pages used for memmap
[    0.000000]   DMA32 zone: 836840 pages, LIFO batch:31
[    0.000000]   Normal zone: 2008 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000cfa00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xccdbe000-0xcd78efff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd819000-0xcd8b8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd8b9000-0xce081fff]
[    0.000000] PM: Registered nosave memory: [mem 0xce082000-0xce0fbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xce0fd000-0xce13ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcebd1000-0xceff1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xcf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 954044
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-47-generic root=UUID=f7a18fd5-2d19-4c2d-837a-a3ddabeb4bc7 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3477020K/3877400K available (12300K kernel code, 2473K rwdata, 4252K rodata, 2408K init, 2416K bss, 400380K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39206 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3292.430 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.86 BogoMIPS (lpj=13169720)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028069] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.028087] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.028096] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.028270] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028271] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028274] mce: CPU supports 7 MCE banks
[    0.028280] CPU0: Thermal monitoring enabled (TM1)
[    0.028287] process: using mwait in idle threads
[    0.028289] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.028289] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.028291] Spectre V2 : Mitigation: Full generic retpoline
[    0.028291] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028292] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.028292] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028293] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.028376] Freeing SMP alternatives memory: 36K
[    0.035691] TSC deadline timer enabled
[    0.035693] smpboot: CPU0: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.035759] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.035779] ... version:                3
[    0.035779] ... bit width:              48
[    0.035780] ... generic registers:      4
[    0.035780] ... value mask:             0000ffffffffffff
[    0.035781] ... max period:             00007fffffffffff
[    0.035781] ... fixed-purpose events:   3
[    0.035782] ... event mask:             000000070000000f
[    0.035815] Hierarchical SRCU implementation.
[    0.036000] smp: Bringing up secondary CPUs ...
[    0.036000] x86: Booting SMP configuration:
[    0.036000] .... node  #0, CPUs:      #1
[    0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.036000]  #2 #3
[    0.040049] smp: Brought up 1 node, 4 CPUs
[    0.040049] smpboot: Max logical packages: 1
[    0.040049] smpboot: Total of 4 processors activated (26339.44 BogoMIPS)
[    0.042329] devtmpfs: initialized
[    0.042329] x86/mm: Memory block size: 128MB
[    0.042329] evm: security.selinux
[    0.042329] evm: security.SMACK64
[    0.042329] evm: security.SMACK64EXEC
[    0.042329] evm: security.SMACK64TRANSMUTE
[    0.042329] evm: security.SMACK64MMAP
[    0.042329] evm: security.apparmor
[    0.042329] evm: security.ima
[    0.042329] evm: security.capability
[    0.042329] PM: Registering ACPI NVS region [mem 0xcd819000-0xcd8b8fff] (655360 bytes)
[    0.042329] PM: Registering ACPI NVS region [mem 0xce0fd000-0xce13ffff] (274432 bytes)
[    0.042329] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.042329] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.042329] pinctrl core: initialized pinctrl subsystem
[    0.042329] RTC time: 11:04:02, date: 04/15/19
[    0.042329] NET: Registered protocol family 16
[    0.042329] audit: initializing netlink subsys (disabled)
[    0.042329] audit: type=2000 audit(1555326242.040:1): state=initialized audit_enabled=0 res=1
[    0.042329] cpuidle: using governor ladder
[    0.042329] cpuidle: using governor menu
[    0.042329] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.042329] ACPI: bus type PCI registered
[    0.042329] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.042329] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.042329] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.042329] PCI: Using configuration type 1 for base access
[    0.042329] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.044602] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044602] ACPI: Added _OSI(Module Device)
[    0.044602] ACPI: Added _OSI(Processor Device)
[    0.044602] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044602] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044602] ACPI: Added _OSI(Linux-Dell-Video)
[    0.044602] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.044602] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.044602] ACPI: Executed 1 blocks of module-level executable AML code
[    0.048550] ACPI: Dynamic OEM Table Load:
[    0.048556] ACPI: SSDT 0xFFFF888CDA389000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.048693] ACPI: Dynamic OEM Table Load:
[    0.048693] ACPI: SSDT 0xFFFF888CDA30F000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.048693] ACPI: Dynamic OEM Table Load:
[    0.048693] ACPI: SSDT 0xFFFF888CDA312E00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.049051] ACPI: Interpreter enabled
[    0.049070] ACPI: (supports S0 S3 S4 S5)
[    0.049071] ACPI: Using IOAPIC for interrupt routing
[    0.049138] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.049473] ACPI: Enabled 16 GPEs in block 00 to 3F
[    0.060128] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.060133] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.060437] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.060638] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.060639] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.061214] PCI host bridge to bus 0000:00
[    0.061216] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.061217] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.061218] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.061219] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.061220] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.061221] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.061222] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.061223] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.061225] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.061232] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.061325] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.061333] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.061338] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.061341] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.061351] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.061465] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.061487] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[    0.061553] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.061641] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.061664] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a00f 64bit]
[    0.061734] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.061821] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.061841] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
[    0.061921] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.062005] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.062023] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[    0.062085] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.062177] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.062316] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.062419] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.062498] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.062586] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.062665] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.062758] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.062778] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
[    0.062858] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.062941] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
[    0.063119] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.063136] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.063142] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.063149] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.063155] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.063162] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.063168] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
[    0.063206] pci 0000:00:1f.2: PME# supported from D3hot
[    0.063284] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.063300] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
[    0.063319] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.063462] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.063529] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.063563] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.063596] pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.063616] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.063737] pci 0000:02:00.0: supports D1 D2
[    0.063738] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.076030] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.076035] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.076044] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.076131] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
[    0.076288] pci 0000:00:1c.5: PCI bridge to [bus 03-04] (subtractive decode)
[    0.076297] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.076299] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.076300] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.076301] pci 0000:00:1c.5:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.076302] pci 0000:00:1c.5:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.076303] pci 0000:00:1c.5:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.076304] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.076305] pci 0000:00:1c.5:   bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode)
[    0.076412] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.076433] pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.076434] pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.076435] pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.076436] pci 0000:03:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.076437] pci 0000:03:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.076438] pci 0000:03:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.076439] pci 0000:03:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.076440] pci 0000:03:00.0:   bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode)
[    0.077190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.077254] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.077317] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.077379] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.077441] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.077504] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.077566] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.077632] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.080003] SCSI subsystem initialized
[    0.080017] libata version 3.00 loaded.
[    0.080021] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.080021] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.080021] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.080021] vgaarb: loaded
[    0.080024] ACPI: bus type USB registered
[    0.080036] usbcore: registered new interface driver usbfs
[    0.080041] usbcore: registered new interface driver hub
[    0.080054] usbcore: registered new device driver usb
[    0.080078] EDAC MC: Ver: 3.0.0
[    0.080078] Registered efivars operations
[    0.084019] PCI: Using ACPI for IRQ routing
[    0.085032] PCI: pci_cache_line_size set to 64 bytes
[    0.085070] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.085072] e820: reserve RAM buffer [mem 0xccdbe000-0xcfffffff]
[    0.085073] e820: reserve RAM buffer [mem 0xcd819000-0xcfffffff]
[    0.085074] e820: reserve RAM buffer [mem 0xce0fd000-0xcfffffff]
[    0.085075] e820: reserve RAM buffer [mem 0xcebd1000-0xcfffffff]
[    0.085076] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
[    0.085077] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.085151] NetLabel: Initializing
[    0.085151] NetLabel:  domain hash size = 128
[    0.085152] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.085164] NetLabel:  unlabeled traffic allowed by default
[    0.085175] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.085175] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.088015] clocksource: Switched to clocksource hpet
[    0.097207] VFS: Disk quotas dquot_6.6.0
[    0.097221] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.097300] AppArmor: AppArmor Filesystem Enabled
[    0.097324] pnp: PnP ACPI init
[    0.097437] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.097442] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.097522] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.097524] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.097525] system 00:01: [io  0xffff] has been reserved
[    0.097527] system 00:01: [io  0xffff] has been reserved
[    0.097528] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.097529] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.097530] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.097532] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.097535] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.097556] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.097604] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.097608] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.097693] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.097697] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.098031] pnp 00:05: [dma 3]
[    0.098139] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.098260] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.098264] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.098434] pnp 00:07: [dma 0 disabled]
[    0.098476] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.098803] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.098805] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.098806] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.098807] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.098809] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.098810] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.098811] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.098813] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.098814] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.098816] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.098817] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.098821] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.099000] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[    0.099001] system 00:09: [mem 0x40000000-0x401fffff] has been reserved
[    0.099005] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.099035] pnp: PnP ACPI: found 10 devices
[    0.104886] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.104929] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.104946] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.104948] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.104954] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.104959] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.104978] pci 0000:00:1c.5: PCI bridge to [bus 03-04]
[    0.104989] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.104990] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.104991] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.104992] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.104993] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.104994] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.104996] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.104997] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window]
[    0.104998] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.104999] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.105000] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.105001] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.105002] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.105004] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.105005] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.105006] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.105007] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.105008] pci_bus 0000:03: resource 11 [mem 0xdfa00000-0xfeafffff window]
[    0.105009] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.105010] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.105011] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.105012] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.105013] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.105015] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.105016] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.105017] pci_bus 0000:04: resource 11 [mem 0xdfa00000-0xfeafffff window]
[    0.105106] NET: Registered protocol family 2
[    0.105254] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.105303] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.105356] TCP: Hash tables configured (established 32768 bind 32768)
[    0.105381] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.105392] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.105425] NET: Registered protocol family 1
[    0.105445] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.152140] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.152176] Unpacking initramfs...
[    0.555141] Freeing initrd memory: 36920K
[    0.555150] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.555152] software IO TLB [mem 0xbc076000-0xc0076000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.555382] Scanning for low memory corruption every 60 seconds
[    0.555872] Initialise system trusted keyrings
[    0.555880] Key type blacklist registered
[    0.555908] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.556774] zbud: loaded
[    0.557137] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.557235] fuse init (API version 7.26)
[    0.558342] Key type asymmetric registered
[    0.558343] Asymmetric key parser 'x509' registered
[    0.558376] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.558406] io scheduler noop registered
[    0.558407] io scheduler deadline registered
[    0.558428] io scheduler cfq registered (default)
[    0.558865] efifb: probing for efifb
[    0.558877] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.558878] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.558878] efifb: scrolling: redraw
[    0.558880] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.558962] Console: switching to colour frame buffer device 128x48
[    0.558975] fb0: EFI VGA frame buffer device
[    0.558982] intel_idle: MWAIT substates: 0x1120
[    0.558982] intel_idle: v0.4.1 model 0x2A
[    0.559079] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.559151] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.559160] ACPI: Power Button [PWRB]
[    0.559185] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.559207] ACPI: Power Button [PWRF]
[    0.559498] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.580006] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.581691] Linux agpgart interface v0.103
[    0.582782] loop: module loaded
[    0.582906] libphy: Fixed MDIO Bus: probed
[    0.582907] tun: Universal TUN/TAP device driver, 1.6
[    0.582931] PPP generic driver version 2.4.2
[    0.582959] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.582961] ehci-pci: EHCI PCI platform driver
[    0.583076] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.583082] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.583093] ehci-pci 0000:00:1a.0: debug port 2
[    0.586984] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.586996] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c18000
[    0.600039] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.600104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.600105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.600106] usb usb1: Product: EHCI Host Controller
[    0.600107] usb usb1: Manufacturer: Linux 4.15.0-47-generic ehci_hcd
[    0.600108] usb usb1: SerialNumber: 0000:00:1a.0
[    0.600264] hub 1-0:1.0: USB hub found
[    0.600270] hub 1-0:1.0: 2 ports detected
[    0.600480] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.600483] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.600493] ehci-pci 0000:00:1d.0: debug port 2
[    0.604378] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.604386] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
[    0.620036] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.620100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.620102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.620103] usb usb2: Product: EHCI Host Controller
[    0.620104] usb usb2: Manufacturer: Linux 4.15.0-47-generic ehci_hcd
[    0.620105] usb usb2: SerialNumber: 0000:00:1d.0
[    0.620251] hub 2-0:1.0: USB hub found
[    0.620256] hub 2-0:1.0: 2 ports detected
[    0.620375] ehci-platform: EHCI generic platform driver
[    0.620383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.620386] ohci-pci: OHCI PCI platform driver
[    0.620391] ohci-platform: OHCI generic platform driver
[    0.620395] uhci_hcd: USB Universal Host Controller Interface driver
[    0.620495] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.620499] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.621573] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    0.621577] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.621684] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.621686] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.621687] usb usb3: Product: xHCI Host Controller
[    0.621688] usb usb3: Manufacturer: Linux 4.15.0-47-generic xhci-hcd
[    0.621689] usb usb3: SerialNumber: 0000:00:14.0
[    0.621832] hub 3-0:1.0: USB hub found
[    0.621842] hub 3-0:1.0: 4 ports detected
[    0.622168] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.622171] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.622173] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.622200] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.622202] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.622203] usb usb4: Product: xHCI Host Controller
[    0.622204] usb usb4: Manufacturer: Linux 4.15.0-47-generic xhci-hcd
[    0.622205] usb usb4: SerialNumber: 0000:00:14.0
[    0.622345] hub 4-0:1.0: USB hub found
[    0.622355] hub 4-0:1.0: 4 ports detected
[    0.622723] i8042: PNP: No PS/2 controller found.
[    0.622893] mousedev: PS/2 mouse device common for all mice
[    0.623134] rtc_cmos 00:02: RTC can wake from S4
[    0.623251] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.623276] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.623281] i2c /dev entries driver
[    0.623285] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    0.623338] device-mapper: uevent: version 1.0.3
[    0.623391] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.623396] intel_pstate: Intel P-state driver initializing
[    0.623531] ledtrig-cpu: registered to indicate activity on CPUs
[    0.623533] EFI Variables Facility v0.08 2004-May-17
[    0.629755] NET: Registered protocol family 10
[    0.632654] Segment Routing with IPv6
[    0.632673] NET: Registered protocol family 17
[    0.632706] Key type dns_resolver registered
[    0.632897] RAS: Correctable Errors collector initialized.
[    0.632923] microcode: sig=0x206a7, pf=0x2, revision=0x2e
[    0.632967] microcode: Microcode Update Driver: v2.2.
[    0.632975] sched_clock: Marking stable (632963573, 0)->(612278191, 20685382)
[    0.633125] registered taskstats version 1
[    0.633135] Loading compiled-in X.509 certificates
[    0.635055] Loaded X.509 cert 'Build time autogenerated kernel key: 7211859d1298c08a101905a3cb814e8c7b4bf4a4'
[    0.635414] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    0.635435] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    0.635642] Couldn't get size: 0x800000000000000e
[    0.635644] MODSIGN: Couldn't get UEFI MokListRT
[    0.635950] zswap: loaded using pool lzo/zbud
[    0.638405] Key type big_key registered
[    0.638409] Key type trusted registered
[    0.639583] Key type encrypted registered
[    0.639585] AppArmor: AppArmor sha1 policy hashing enabled
[    0.639587] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.639591] ima: Allocated hash algorithm: sha1
[    0.639606] evm: HMAC attrs: 0x1
[    0.639836]   Magic number: 15:791:74
[    0.639929] rtc_cmos 00:02: setting system clock to 2019-04-15 11:04:03 UTC (1555326243)
[    0.639972] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.639972] EDD information not available.
[    0.641870] Freeing unused kernel memory: 2408K
[    0.676062] Write protecting the kernel read-only data: 20480k
[    0.676545] Freeing unused kernel memory: 2008K
[    0.679798] Freeing unused kernel memory: 1892K
[    0.685541] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.685541] x86/mm: Checking user space page tables
[    0.691165] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.755660] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.755669] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.756204] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x        (ptrval), bc:5f:f4:f1:6d:e5, XID 0c900800 IRQ 25
[    0.756206] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.756445] ahci 0000:00:1f.2: version 3.0
[    0.766721] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.766725] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.770890] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    0.828576] scsi host0: ahci
[    0.828675] scsi host1: ahci
[    0.828760] scsi host2: ahci
[    0.828861] scsi host3: ahci
[    0.828934] scsi host4: ahci
[    0.829010] scsi host5: ahci
[    0.829038] ata1: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16100 irq 26
[    0.829040] ata2: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16180 irq 26
[    0.829042] ata3: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16200 irq 26
[    0.829043] ata4: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16280 irq 26
[    0.829044] ata5: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16300 irq 26
[    0.829046] ata6: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16380 irq 26
[    0.936018] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.956025] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.092811] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.092822] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.093109] hub 1-1:1.0: USB hub found
[    1.093201] hub 1-1:1.0: 6 ports detected
[    1.112692] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.112696] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.112857] hub 2-1:1.0: USB hub found
[    1.112926] hub 2-1:1.0: 8 ports detected
[    1.142500] ata5: SATA link down (SStatus 0 SControl 300)
[    1.142522] ata3: SATA link down (SStatus 0 SControl 300)
[    1.142582] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.142598] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.142617] ata6: SATA link down (SStatus 0 SControl 300)
[    1.142633] ata4: SATA link down (SStatus 0 SControl 300)
[    1.144139] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.144143] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.144147] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.145449] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[    1.145453] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.146501] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.146506] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.146509] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.147522] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.147527] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.147530] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.148826] ata1.00: configured for UDMA/133
[    1.149101] scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[    1.149372] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.149451] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.149454] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.149501] sd 0:0:0:0: [sda] Write Protect is off
[    1.149503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.149542] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.152352] ata2.00: ATAPI: ATAPI   iHAS124   E, 4L04, max UDMA/100
[    1.153765] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.153766] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.153768] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.154064] ata2.00: configured for UDMA/100
[    1.155218] scsi 1:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L04 PQ: 0 ANSI: 5
[    1.191395]  sda: sda1 sda2 sda3 sda4
[    1.191915] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.218475] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.218476] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.218559] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.218635] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.380036] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    1.496350] usb 1-1.1: New USB device found, idVendor=0e8f, idProduct=0020
[    1.496354] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.496357] usb 1-1.1: Product: PS2toUSB Adapter
[    1.496359] usb 1-1.1: Manufacturer: GASIA
[    1.501078] hidraw: raw HID events driver (C) Jiri Kosina
[    1.509426] usbhid 1-1.1:1.1: can't add hid device: -32
[    1.509434] usbhid: probe of 1-1.1:1.1 failed with error -32
[    1.509443] usbcore: registered new interface driver usbhid
[    1.509443] usbhid: USB HID core driver
[    1.511021] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0E8F:0020.0001/input/input2
[    1.554886] random: fast init done
[    1.564058] tsc: Refined TSC clocksource calibration: 3292.520 MHz
[    1.564069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns
[    1.568182] hid-generic 0003:0E8F:0020.0001: input,hidraw0: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1a.0-1.1/input0
[    1.568214] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.568240] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.568243] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.580043] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[    1.699692] usb 1-1.2: New USB device found, idVendor=046a, idProduct=0023
[    1.699695] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.711632] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046A:0023.0002/input/input3
[    1.718727] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046A:0023.0003/input/input4
[    1.768264] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1.2/input0
[    1.810674] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.828283] cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.0-1.2/input1
[    1.829303] usb 1-1.1: USB disconnect, device number 3
[    2.588236] clocksource: Switched to clocksource tsc
[    3.296235] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.431841] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.448113] systemd[1]: Detected architecture x86-64.
[    3.460872] systemd[1]: Set hostname to <moi>.
[    3.884064] usb 1-1.1: new low-speed USB device number 5 using ehci-pci
[    3.996455] random: crng init done
[    3.996458] random: 7 urandom warning(s) missed due to ratelimiting
[    5.307893] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.308069] systemd[1]: Created slice User and Session Slice.
[    5.308080] systemd[1]: Reached target Remote File Systems.
[    5.308116] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.308225] systemd[1]: Created slice System Slice.
[    5.308314] systemd[1]: Listening on udev Control Socket.
[    5.308358] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.839826] lp: driver loaded but no devices found
[    5.879516] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    5.946896] ppdev: user-space parallel port driver
[    5.957847] parport_pc 00:05: reported by Plug and Play ACPI
[    5.957906] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    6.052119] lp0: using parport0 (interrupt-driven).
[    6.444050] usb 1-1.1: new low-speed USB device number 6 using ehci-pci
[    6.568300] usb 1-1.1: New USB device found, idVendor=0e8f, idProduct=0020
[    6.568304] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.568306] usb 1-1.1: Product: PS2toUSB Adapter
[    6.568309] usb 1-1.1: Manufacturer: GASIA
[    6.571592] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0E8F:0020.0004/input/input5
[    6.597845] systemd-journald[277]: Received request to flush runtime journal from PID 1
[    6.628172] hid-generic 0003:0E8F:0020.0004: input,hidraw0: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1a.0-1.1/input0
[    6.632177] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0E8F:0020.0005/input/input6
[    6.692186] hid-generic 0003:0E8F:0020.0005: input,hidraw3: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1a.0-1.1/input1
[   13.424639] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.432444] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   13.432452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.432454] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247)
[   13.432458] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   13.432462] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.432463] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247)
[   13.432468] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   13.432471] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.432472] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247)
[   13.432476] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   13.432480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.432481] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.460397] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   13.460399] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   13.460400] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.460400] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   13.523494] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   13.526098] intel_rapl: Found RAPL domain package
[   13.526099] intel_rapl: Found RAPL domain core
[   13.526100] intel_rapl: Found RAPL domain uncore
[   13.558546] [drm] Memory usable by graphics device = 2048M
[   13.558550] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   13.558551] fb: switching to inteldrmfb from EFI VGA
[   13.558584] Console: switching to colour dummy device 80x25
[   13.558675] [drm] Replacing VGA console driver
[   13.564175] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.564176] [drm] Driver supports precise vblank timestamp query.
[   13.567929] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.575520] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   13.576146] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.576328] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   13.932872] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   14.281704] fbcon: inteldrmfb (fb0) is primary device
[   14.281778] Console: switching to colour frame buffer device 240x67
[   14.281804] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.315202] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   14.315205] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.315208] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.315209] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.315211] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   14.315212] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.315214] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   14.315216] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   14.315218] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   14.334057] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   14.334119] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.334176] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.334234] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.334288] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.334344] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   14.334402] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   14.334467] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   14.334526] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   15.866961] Adding 8522748k swap on /dev/sda4.  Priority:-2 extents:1 across:8522748k FS
[   16.714042] audit: type=1400 audit(1555326259.568:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=580 comm="apparmor_parser"
[   16.714194] audit: type=1400 audit(1555326259.568:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=579 comm="apparmor_parser"
[   16.714197] audit: type=1400 audit(1555326259.568:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=579 comm="apparmor_parser"
[   16.714199] audit: type=1400 audit(1555326259.568:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=579 comm="apparmor_parser"
[   16.715254] audit: type=1400 audit(1555326259.568:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=581 comm="apparmor_parser"
[   16.715625] audit: type=1400 audit(1555326259.568:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=577 comm="apparmor_parser"
[   16.715629] audit: type=1400 audit(1555326259.568:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=577 comm="apparmor_parser"
[   16.715632] audit: type=1400 audit(1555326259.568:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=577 comm="apparmor_parser"
[   16.715634] audit: type=1400 audit(1555326259.568:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=577 comm="apparmor_parser"
[   16.716001] audit: type=1400 audit(1555326259.568:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=576 comm="apparmor_parser"
[   20.374449] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   20.553459] r8169 0000:02:00.0 enp2s0: link down
[   20.553476] r8169 0000:02:00.0 enp2s0: link down
[   20.553542] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   23.540690] r8169 0000:02:00.0 enp2s0: link up
[   23.540701] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
moi@moi:~$ 
     

Hors ligne

#10 Le 15/04/2019, à 14:10

moko138

Re : [Réolu]votre avis sur mon hdd svp ?

On voit déjà des problèmes répétés en usb

adaptateur usb - ps/2 :

usb 1-1.1: new low-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0e8f, idProduct=0020
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: PS2toUSB Adapter
usb 1-1.1: Manufacturer: GASIA
hidraw: raw HID events driver (C) Jiri Kosina
usbhid 1-1.1:1.1: can't add hid device: -32
usbhid: probe of 1-1.1:1.1 failed with error -32

  - -

clavier usb :

cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.0-1.2/input1
usb 1-1.1: USB disconnect, device number 3

Donc montre

lsusb | sort ; echo ; lsusb -t

pour voir des détails,

et la suite de dmesg :

dmesg | head -2000 | tail -1001

%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#11 Le 15/04/2019, à 15:05

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

  lsusb | sort ; echo ; lsusb -t
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 004: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard G230
Bus 001 Device 005: ID 0e8f:0020 GreenAsia Inc. USB to PS/2 Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
        |__ Port 1: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 1: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 2: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
moi@moi:~$ 
 

""""

 ~$ dmesg | head -2000 | tail -1001
[    0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[    0.000000] Linux version 4.15.0-47-generic (buildd@lgw01-amd64-001) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #50-Ubuntu SMP Wed Mar 13 10:44:52 UTC 2019 (Ubuntu 4.15.0-47.50-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-47-generic root=UUID=f7a18fd5-2d19-4c2d-837a-a3ddabeb4bc7 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000ccdbdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ccdbe000-0x00000000cd78efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cd78f000-0x00000000cd818fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd819000-0x00000000cd8b8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd8b9000-0x00000000ce081fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ce082000-0x00000000ce0fbfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000ce0fc000-0x00000000ce0fcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce0fd000-0x00000000ce13ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ce140000-0x00000000cebd0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cebd1000-0x00000000ceff1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ceff2000-0x00000000ceffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xcd89d000  ACPI 2.0=0xcd89d000  SMBIOS=0xf04c0  MPS=0xfd4c0 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H77M, BIOS P1.60 08/09/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   5 base 11F800000 mask FFF800000 uncachable
[    0.000000]   6 base 11F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 3822M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x70f3f000, 0x70f3ffff] PGTABLE
[    0.000000] BRK [0x70f40000, 0x70f40fff] PGTABLE
[    0.000000] BRK [0x70f41000, 0x70f41fff] PGTABLE
[    0.000000] BRK [0x70f42000, 0x70f42fff] PGTABLE
[    0.000000] BRK [0x70f43000, 0x70f43fff] PGTABLE
[    0.000000] BRK [0x70f44000, 0x70f44fff] PGTABLE
[    0.000000] BRK [0x70f45000, 0x70f45fff] PGTABLE
[    0.000000] BRK [0x70f46000, 0x70f46fff] PGTABLE
[    0.000000] BRK [0x70f47000, 0x70f47fff] PGTABLE
[    0.000000] BRK [0x70f48000, 0x70f48fff] PGTABLE
[    0.000000] BRK [0x70f49000, 0x70f49fff] PGTABLE
[    0.000000] BRK [0x70f4a000, 0x70f4afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337d3000-0x35be0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000CD89D000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000CD89D080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CD8A6F58 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CD89D1A0 009DB4 (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CD8B7080 000040
[    0.000000] ACPI: APIC 0x00000000CD8A7068 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CD8A70E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: ASF! 0x00000000CD8A7128 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: MCFG 0x00000000CD8A71D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CD8A7210 0007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
[    0.000000] ACPI: AAFT 0x00000000CD8A79F8 0000EA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CD8A7AE8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CD8A7B20 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000CD8A7E90 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CD8A8840 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: BGRT 0x00000000CD8A92D8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11f5d3000-0x11f5fdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000ccdbdfff]
[    0.000000]   node   0: [mem 0x00000000cd78f000-0x00000000cd818fff]
[    0.000000]   node   0: [mem 0x00000000ce0fc000-0x00000000ce0fcfff]
[    0.000000]   node   0: [mem 0x00000000ce140000-0x00000000cebd0fff]
[    0.000000]   node   0: [mem 0x00000000ceff2000-0x00000000ceffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000] Reserved but unavailable: 11130 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[    0.000000] On node 0 totalpages: 969350
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 158 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13076 pages used for memmap
[    0.000000]   DMA32 zone: 836840 pages, LIFO batch:31
[    0.000000]   Normal zone: 2008 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000cfa00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xccdbe000-0xcd78efff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd819000-0xcd8b8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd8b9000-0xce081fff]
[    0.000000] PM: Registered nosave memory: [mem 0xce082000-0xce0fbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xce0fd000-0xce13ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcebd1000-0xceff1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xcf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 954044
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-47-generic root=UUID=f7a18fd5-2d19-4c2d-837a-a3ddabeb4bc7 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3477020K/3877400K available (12300K kernel code, 2473K rwdata, 4252K rodata, 2408K init, 2416K bss, 400380K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39206 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3292.604 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.20 BogoMIPS (lpj=13170416)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028071] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.028091] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.028101] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.028274] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028274] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028278] mce: CPU supports 7 MCE banks
[    0.028284] CPU0: Thermal monitoring enabled (TM1)
[    0.028291] process: using mwait in idle threads
[    0.028293] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.028294] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.028296] Spectre V2 : Mitigation: Full generic retpoline
[    0.028296] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028297] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.028297] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028298] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.028382] Freeing SMP alternatives memory: 36K
[    0.035686] TSC deadline timer enabled
[    0.035689] smpboot: CPU0: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.035753] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.035773] ... version:                3
[    0.035773] ... bit width:              48
[    0.035774] ... generic registers:      4
[    0.035774] ... value mask:             0000ffffffffffff
[    0.035775] ... max period:             00007fffffffffff
[    0.035775] ... fixed-purpose events:   3
[    0.035776] ... event mask:             000000070000000f
[    0.035810] Hierarchical SRCU implementation.
[    0.036000] smp: Bringing up secondary CPUs ...
[    0.036000] x86: Booting SMP configuration:
[    0.036000] .... node  #0, CPUs:      #1
[    0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.036000]  #2 #3
[    0.040051] smp: Brought up 1 node, 4 CPUs
[    0.040051] smpboot: Max logical packages: 1
[    0.040051] smpboot: Total of 4 processors activated (26340.83 BogoMIPS)
[    0.042332] devtmpfs: initialized
[    0.042332] x86/mm: Memory block size: 128MB
[    0.042332] evm: security.selinux
[    0.042332] evm: security.SMACK64
[    0.042332] evm: security.SMACK64EXEC
[    0.042332] evm: security.SMACK64TRANSMUTE
[    0.042332] evm: security.SMACK64MMAP
[    0.042332] evm: security.apparmor
[    0.042332] evm: security.ima
[    0.042332] evm: security.capability
[    0.042332] PM: Registering ACPI NVS region [mem 0xcd819000-0xcd8b8fff] (655360 bytes)
[    0.042332] PM: Registering ACPI NVS region [mem 0xce0fd000-0xce13ffff] (274432 bytes)
[    0.042332] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.042332] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.042332] pinctrl core: initialized pinctrl subsystem
[    0.042332] RTC time: 12:58:48, date: 04/15/19
[    0.042332] NET: Registered protocol family 16
[    0.042332] audit: initializing netlink subsys (disabled)
[    0.042332] audit: type=2000 audit(1555333128.040:1): state=initialized audit_enabled=0 res=1
[    0.042332] cpuidle: using governor ladder
[    0.042332] cpuidle: using governor menu
[    0.042332] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.042332] ACPI: bus type PCI registered
[    0.042332] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.042332] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.042332] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.042332] PCI: Using configuration type 1 for base access
[    0.042332] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.044604] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044604] ACPI: Added _OSI(Module Device)
[    0.044604] ACPI: Added _OSI(Processor Device)
[    0.044604] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044604] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044604] ACPI: Added _OSI(Linux-Dell-Video)
[    0.044604] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.044604] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.044604] ACPI: Executed 1 blocks of module-level executable AML code
[    0.048550] ACPI: Dynamic OEM Table Load:
[    0.048556] ACPI: SSDT 0xFFFF94DD5A38A000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.048693] ACPI: Dynamic OEM Table Load:
[    0.048693] ACPI: SSDT 0xFFFF94DD5A30F000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.048693] ACPI: Dynamic OEM Table Load:
[    0.048693] ACPI: SSDT 0xFFFF94DD5A312A00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.049053] ACPI: Interpreter enabled
[    0.049072] ACPI: (supports S0 S3 S4 S5)
[    0.049073] ACPI: Using IOAPIC for interrupt routing
[    0.049139] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.049474] ACPI: Enabled 16 GPEs in block 00 to 3F
[    0.060125] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.060130] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.060433] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.060634] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.060635] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.061210] PCI host bridge to bus 0000:00
[    0.061212] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.061213] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.061214] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.061215] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.061216] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.061217] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.061218] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.061219] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.061221] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.061228] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.061321] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.061330] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.061334] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.061338] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.061347] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.061462] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.061485] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[    0.061551] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.061639] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.061662] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a00f 64bit]
[    0.061730] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.061818] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.061838] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
[    0.061918] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.062003] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.062021] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[    0.062082] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.062173] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.062309] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.062411] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.062490] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.062578] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.062657] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.062751] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.062771] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
[    0.062851] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.062934] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
[    0.063112] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.063128] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.063135] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.063141] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.063148] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.063154] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.063161] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
[    0.063198] pci 0000:00:1f.2: PME# supported from D3hot
[    0.063276] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.063292] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
[    0.063311] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.063455] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.063522] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.063556] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.063588] pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.063609] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.063730] pci 0000:02:00.0: supports D1 D2
[    0.063731] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.076029] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.076034] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.076044] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.076131] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
[    0.076288] pci 0000:00:1c.5: PCI bridge to [bus 03-04] (subtractive decode)
[    0.076297] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.076298] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.076300] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.076301] pci 0000:00:1c.5:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.076302] pci 0000:00:1c.5:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.076303] pci 0000:00:1c.5:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.076304] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.076305] pci 0000:00:1c.5:   bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode)
[    0.076412] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.076433] pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.076434] pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.076435] pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.076436] pci 0000:03:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.076437] pci 0000:03:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.076438] pci 0000:03:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.076439] pci 0000:03:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.076440] pci 0000:03:00.0:   bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode)
[    0.077190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.077254] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.077317] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.077380] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.077442] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.077504] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.077567] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.077632] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.080003] SCSI subsystem initialized
[    0.080016] libata version 3.00 loaded.
[    0.080021] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.080021] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.080021] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.080021] vgaarb: loaded
[    0.080023] ACPI: bus type USB registered
[    0.080035] usbcore: registered new interface driver usbfs
[    0.080041] usbcore: registered new interface driver hub
[    0.080053] usbcore: registered new device driver usb
[    0.080077] EDAC MC: Ver: 3.0.0
[    0.080077] Registered efivars operations
[    0.084019] PCI: Using ACPI for IRQ routing
[    0.085035] PCI: pci_cache_line_size set to 64 bytes
[    0.085074] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.085075] e820: reserve RAM buffer [mem 0xccdbe000-0xcfffffff]
[    0.085077] e820: reserve RAM buffer [mem 0xcd819000-0xcfffffff]
[    0.085078] e820: reserve RAM buffer [mem 0xce0fd000-0xcfffffff]
[    0.085079] e820: reserve RAM buffer [mem 0xcebd1000-0xcfffffff]
[    0.085080] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
[    0.085081] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.085153] NetLabel: Initializing
[    0.085154] NetLabel:  domain hash size = 128
[    0.085154] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.085166] NetLabel:  unlabeled traffic allowed by default
[    0.085177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.085177] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.088020] clocksource: Switched to clocksource hpet
[    0.097202] VFS: Disk quotas dquot_6.6.0
[    0.097216] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.097294] AppArmor: AppArmor Filesystem Enabled
[    0.097318] pnp: PnP ACPI init
[    0.097432] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.097437] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.097518] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.097520] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.097521] system 00:01: [io  0xffff] has been reserved
[    0.097522] system 00:01: [io  0xffff] has been reserved
[    0.097523] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.097525] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.097526] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.097527] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.097530] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.097552] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.097600] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.097603] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.097689] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.097693] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.098027] pnp 00:05: [dma 3]
[    0.098134] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.098257] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.098261] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.098431] pnp 00:07: [dma 0 disabled]
[    0.098473] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.098802] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.098803] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.098804] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.098806] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.098807] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.098808] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.098810] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.098811] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.098812] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.098814] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.098815] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.098819] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.098998] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[    0.098999] system 00:09: [mem 0x40000000-0x401fffff] has been reserved
[    0.099002] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.099033] pnp: PnP ACPI: found 10 devices
[    0.104874] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.104915] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.104933] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.104935] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.104941] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.104946] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.104965] pci 0000:00:1c.5: PCI bridge to [bus 03-04]
[    0.104975] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.104976] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.104977] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.104979] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.104980] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.104981] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.104982] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.104983] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window]
[    0.104985] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.104986] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.104987] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.104988] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.104989] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.104990] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.104991] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.104992] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.104993] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.104995] pci_bus 0000:03: resource 11 [mem 0xdfa00000-0xfeafffff window]
[    0.104996] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.104997] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.104998] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.104999] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.105000] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.105001] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.105002] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.105003] pci_bus 0000:04: resource 11 [mem 0xdfa00000-0xfeafffff window]
[    0.105094] NET: Registered protocol family 2
[    0.105243] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.105292] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.105347] TCP: Hash tables configured (established 32768 bind 32768)
[    0.105372] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.105383] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.105417] NET: Registered protocol family 1
[    0.105437] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.152140] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.152175] Unpacking initramfs...
[    0.555126] Freeing initrd memory: 36920K
[    0.555135] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.555137] software IO TLB [mem 0xbc076000-0xc0076000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.555370] Scanning for low memory corruption every 60 seconds
[    0.555860] Initialise system trusted keyrings
[    0.555868] Key type blacklist registered
[    0.555896] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.556760] zbud: loaded
[    0.557123] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.557222] fuse init (API version 7.26)
[    0.558328] Key type asymmetric registered
[    0.558329] Asymmetric key parser 'x509' registered
[    0.558361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.558390] io scheduler noop registered
[    0.558391] io scheduler deadline registered
[    0.558412] io scheduler cfq registered (default)
[    0.558848] efifb: probing for efifb
[    0.558860] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.558861] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.558862] efifb: scrolling: redraw
[    0.558863] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.558945] Console: switching to colour frame buffer device 128x48
[    0.558958] fb0: EFI VGA frame buffer device
[    0.558965] intel_idle: MWAIT substates: 0x1120
[    0.558965] intel_idle: v0.4.1 model 0x2A
[    0.559063] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.559133] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.559142] ACPI: Power Button [PWRB]
[    0.559167] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.559190] ACPI: Power Button [PWRF]
[    0.559482] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.579987] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.581703] Linux agpgart interface v0.103
[    0.582792] loop: module loaded
[    0.582916] libphy: Fixed MDIO Bus: probed
[    0.582917] tun: Universal TUN/TAP device driver, 1.6
[    0.582941] PPP generic driver version 2.4.2
[    0.582968] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.582970] ehci-pci: EHCI PCI platform driver
[    0.583085] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.583092] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.583102] ehci-pci 0000:00:1a.0: debug port 2
[    0.587013] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.587025] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c18000
[    0.600033] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.600101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.600103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.600104] usb usb1: Product: EHCI Host Controller
[    0.600105] usb usb1: Manufacturer: Linux 4.15.0-47-generic ehci_hcd
[    0.600106] usb usb1: SerialNumber: 0000:00:1a.0
[    0.600260] hub 1-0:1.0: USB hub found
[    0.600266] hub 1-0:1.0: 2 ports detected
[    0.600476] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.600480] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.600490] ehci-pci 0000:00:1d.0: debug port 2
[    0.604377] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.604385] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
[    0.620037] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.620107] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.620108] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.620110] usb usb2: Product: EHCI Host Controller
[    0.620111] usb usb2: Manufacturer: Linux 4.15.0-47-generic ehci_hcd
[    0.620112] usb usb2: SerialNumber: 0000:00:1d.0
[    0.620254] hub 2-0:1.0: USB hub found
[    0.620260] hub 2-0:1.0: 2 ports detected
[    0.620377] ehci-platform: EHCI generic platform driver
[    0.620386] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.620388] ohci-pci: OHCI PCI platform driver
[    0.620394] ohci-platform: OHCI generic platform driver
[    0.620398] uhci_hcd: USB Universal Host Controller Interface driver
[    0.620498] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.620502] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.621577] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    0.621581] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.621687] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.621689] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.621690] usb usb3: Product: xHCI Host Controller
[    0.621691] usb usb3: Manufacturer: Linux 4.15.0-47-generic xhci-hcd
[    0.621692] usb usb3: SerialNumber: 0000:00:14.0
[    0.621835] hub 3-0:1.0: USB hub found
[    0.621844] hub 3-0:1.0: 4 ports detected
[    0.622172] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.622175] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.622177] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.622204] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.622206] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.622207] usb usb4: Product: xHCI Host Controller
[    0.622208] usb usb4: Manufacturer: Linux 4.15.0-47-generic xhci-hcd
[    0.622209] usb usb4: SerialNumber: 0000:00:14.0
[    0.622352] hub 4-0:1.0: USB hub found
[    0.622361] hub 4-0:1.0: 4 ports detected
[    0.622727] i8042: PNP: No PS/2 controller found.
[    0.622896] mousedev: PS/2 mouse device common for all mice
[    0.623137] rtc_cmos 00:02: RTC can wake from S4
[    0.623254] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.623279] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.623284] i2c /dev entries driver
[    0.623288] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    0.623341] device-mapper: uevent: version 1.0.3
[    0.623394] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.623398] intel_pstate: Intel P-state driver initializing
[    0.623534] ledtrig-cpu: registered to indicate activity on CPUs
[    0.623536] EFI Variables Facility v0.08 2004-May-17
[    0.629764] NET: Registered protocol family 10
[    0.632654] Segment Routing with IPv6
[    0.632672] NET: Registered protocol family 17
[    0.632706] Key type dns_resolver registered
[    0.632899] RAS: Correctable Errors collector initialized.
[    0.632924] microcode: sig=0x206a7, pf=0x2, revision=0x2e
[    0.632967] microcode: Microcode Update Driver: v2.2.
[    0.632975] sched_clock: Marking stable (632963853, 0)->(613246439, 19717414)
[    0.633126] registered taskstats version 1
[    0.633137] Loading compiled-in X.509 certificates
[    0.635054] Loaded X.509 cert 'Build time autogenerated kernel key: 7211859d1298c08a101905a3cb814e8c7b4bf4a4'
[    0.635413] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    0.635434] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    0.635641] Couldn't get size: 0x800000000000000e
[    0.635643] MODSIGN: Couldn't get UEFI MokListRT
[    0.635947] zswap: loaded using pool lzo/zbud
[    0.638400] Key type big_key registered
[    0.638404] Key type trusted registered
[    0.639571] Key type encrypted registered
[    0.639574] AppArmor: AppArmor sha1 policy hashing enabled
[    0.639576] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.639580] ima: Allocated hash algorithm: sha1
[    0.639595] evm: HMAC attrs: 0x1
[    0.639826]   Magic number: 15:827:986
[    0.639920] rtc_cmos 00:02: setting system clock to 2019-04-15 12:58:49 UTC (1555333129)
[    0.639963] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.639964] EDD information not available.
[    0.641850] Freeing unused kernel memory: 2408K
[    0.672035] Write protecting the kernel read-only data: 20480k
[    0.672552] Freeing unused kernel memory: 2008K
[    0.675804] Freeing unused kernel memory: 1892K
[    0.681548] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.681548] x86/mm: Checking user space page tables
[    0.687171] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.751885] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.751896] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.752490] ahci 0000:00:1f.2: version 3.0
[    0.752617] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x        (ptrval), bc:5f:f4:f1:6d:e5, XID 0c900800 IRQ 25
[    0.752620] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.762793] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.762797] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.765391] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    0.828872] scsi host0: ahci
[    0.828969] scsi host1: ahci
[    0.829041] scsi host2: ahci
[    0.829122] scsi host3: ahci
[    0.829215] scsi host4: ahci
[    0.829300] scsi host5: ahci
[    0.829347] ata1: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16100 irq 26
[    0.829349] ata2: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16180 irq 26
[    0.829351] ata3: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16200 irq 26
[    0.829353] ata4: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16280 irq 26
[    0.829355] ata5: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16300 irq 26
[    0.829357] ata6: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16380 irq 26
[    0.936011] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.956010] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.092352] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.092356] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.092623] hub 1-1:1.0: USB hub found
[    1.092676] hub 1-1:1.0: 6 ports detected
[    1.112689] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.112692] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.112861] hub 2-1:1.0: USB hub found
[    1.112927] hub 2-1:1.0: 8 ports detected
[    1.142532] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.142553] ata4: SATA link down (SStatus 0 SControl 300)
[    1.142574] ata6: SATA link down (SStatus 0 SControl 300)
[    1.142597] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.142621] ata3: SATA link down (SStatus 0 SControl 300)
[    1.142635] ata5: SATA link down (SStatus 0 SControl 300)
[    1.144086] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.144090] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.144094] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.145381] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[    1.145384] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.146371] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.146375] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.146379] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.146929] ata2.00: ATAPI: ATAPI   iHAS124   E, 4L04, max UDMA/100
[    1.147171] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.147175] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.147178] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.148418] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.148430] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.148433] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.148523] ata1.00: configured for UDMA/133
[    1.148748] scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[    1.148768] ata2.00: configured for UDMA/100
[    1.148983] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.149007] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.149009] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.149020] sd 0:0:0:0: [sda] Write Protect is off
[    1.149022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.149033] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.149880] scsi 1:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L04 PQ: 0 ANSI: 5
[    1.189940]  sda: sda1 sda2 sda3 sda4
[    1.190381] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.217047] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.217049] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.217146] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.217211] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.380017] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    1.507457] usb 1-1.1: New USB device found, idVendor=0e8f, idProduct=0020
[    1.507461] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.507463] usb 1-1.1: Product: PS2toUSB Adapter
[    1.507465] usb 1-1.1: Manufacturer: GASIA
[    1.510650] hidraw: raw HID events driver (C) Jiri Kosina
[    1.518528] usbcore: registered new interface driver usbhid
[    1.518530] usbhid: USB HID core driver
[    1.520105] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0E8F:0020.0001/input/input2
[    1.563993] tsc: Refined TSC clocksource calibration: 3292.520 MHz
[    1.564003] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns
[    1.580247] hid-generic 0003:0E8F:0020.0001: input,hidraw0: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1a.0-1.1/input0
[    1.580417] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0E8F:0020.0002/input/input3
[    1.588010] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[    1.601902] random: fast init done
[    1.640131] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.640148] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.640151] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.640162] hid-generic 0003:0E8F:0020.0002: input,hidraw1: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1a.0-1.1/input1
[    1.707927] usb 1-1.2: New USB device found, idVendor=046a, idProduct=0023
[    1.707929] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.719285] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046A:0023.0003/input/input4
[    1.725102] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046A:0023.0004/input/input5
[    1.776249] cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1.2/input0
[    1.836233] cherry 0003:046A:0023.0004: input,hidraw3: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.0-1.2/input1
[    1.836535] usb 1-1.1: USB disconnect, device number 3
[    1.842236] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.588145] clocksource: Switched to clocksource tsc
[    3.303476] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.439091] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.456064] systemd[1]: Detected architecture x86-64.
[    3.468121] systemd[1]: Set hostname to <moi>.
[    3.884005] usb 1-1.1: new low-speed USB device number 5 using ehci-pci
[    3.957943] random: crng init done
[    3.957945] random: 7 urandom warning(s) missed due to ratelimiting
[    4.000397] usb 1-1.1: New USB device found, idVendor=0e8f, idProduct=0020
[    4.000400] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.000403] usb 1-1.1: Product: PS2toUSB Adapter
[    4.000405] usb 1-1.1: Manufacturer: GASIA
[    4.003042] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0E8F:0020.0005/input/input6
[    4.060108] hid-generic 0003:0E8F:0020.0005: input,hidraw0: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1a.0-1.1/input0
[    4.064206] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0E8F:0020.0006/input/input7
[    4.124069] hid-generic 0003:0E8F:0020.0006: input,hidraw1: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1a.0-1.1/input1
[    5.240198] systemd[1]: Created slice User and Session Slice.
[    5.240236] systemd[1]: Reached target User and Group Name Lookups.
[    5.240344] systemd[1]: Created slice System Slice.
[    5.240426] systemd[1]: Listening on Syslog Socket.
[    5.240473] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.240513] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.240655] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.674025] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    5.830343] lp: driver loaded but no devices found
[    5.897755] systemd-journald[275]: Received request to flush runtime journal from PID 1
[    5.912450] ppdev: user-space parallel port driver
[    5.956796] parport_pc 00:05: reported by Plug and Play ACPI
[    5.956854] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    6.052067] lp0: using parport0 (interrupt-driven).
[   13.886054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.902323] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   13.902331] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.902334] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247)
[   13.902338] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   13.902343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.902344] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247)
[   13.902348] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   13.902352] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.902353] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247)
[   13.902357] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   13.902361] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.902362] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.956594] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   13.956596] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   13.956597] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.956597] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   13.972978] [drm] Memory usable by graphics device = 2048M
[   13.972981] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   13.972982] fb: switching to inteldrmfb from EFI VGA
[   13.973015] Console: switching to colour dummy device 80x25
[   13.973110] [drm] Replacing VGA console driver
[   13.992059] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.992060] [drm] Driver supports precise vblank timestamp query.
[   13.995129] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   14.012681] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   14.014215] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.014474] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   14.023021] intel_rapl: Found RAPL domain package
[   14.023023] intel_rapl: Found RAPL domain core
[   14.023024] intel_rapl: Found RAPL domain uncore
[   14.082488] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   14.720775] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   14.721757] fbcon: inteldrmfb (fb0) is primary device
[   14.721848] Console: switching to colour frame buffer device 240x67
[   14.721886] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.738160] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   14.738163] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.738165] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.738166] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.738168] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   14.738169] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.738172] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   14.738173] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   14.738175] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   14.758610] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.758676] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.758736] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.758797] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.758856] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   14.758915] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   14.758976] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   14.759037] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   14.759097] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   17.201812] Adding 8522748k swap on /dev/sda4.  Priority:-2 extents:1 across:8522748k FS
[   17.246139] audit: type=1400 audit(1555333146.100:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=578 comm="apparmor_parser"
[   17.246144] audit: type=1400 audit(1555333146.100:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=577 comm="apparmor_parser"
[   17.246146] audit: type=1400 audit(1555333146.100:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=577 comm="apparmor_parser"
[   17.246149] audit: type=1400 audit(1555333146.100:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=577 comm="apparmor_parser"
[   17.246978] audit: type=1400 audit(1555333146.100:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=575 comm="apparmor_parser"
[   17.246981] audit: type=1400 audit(1555333146.100:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=575 comm="apparmor_parser"
[   17.246983] audit: type=1400 audit(1555333146.100:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=575 comm="apparmor_parser"
[   17.246985] audit: type=1400 audit(1555333146.100:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=575 comm="apparmor_parser"
[   17.247124] audit: type=1400 audit(1555333146.100:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=579 comm="apparmor_parser"
[   17.248062] audit: type=1400 audit(1555333146.104:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=581 comm="apparmor_parser"
[   20.673989] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   20.841421] r8169 0000:02:00.0 enp2s0: link down
[   20.841438] r8169 0000:02:00.0 enp2s0: link down
[   20.841511] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   23.795547] r8169 0000:02:00.0 enp2s0: link up
[   23.795555] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
moi@moi:~$ 
  

Hors ligne

#12 Le 15/04/2019, à 15:11

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

effectivement ma souris est sur un adaptateur usb - ps/2 :

le clavier est bien un cherry branché en usb 2 a vérifier car il y a quelques ports usb 3

je me rappelle avoir vu au boot défiler des lignes usb


eit:en fait le clavier était en usb3 passé en usb2

la souris aussi en usb3 avec adaptateur passé en usb 2 sans adaptateur
""
encore quelque indices au reboot je vais voir pour changer de clavier

Dernière modification par bilougris (Le 15/04/2019, à 16:48)

Hors ligne

#13 Le 15/04/2019, à 16:37

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

moi@moi:~$ lsusb | sort ; echo ; lsusb -t
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 002 Device 004: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard G230
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
        |__ Port 7: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 8: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 8: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
moi@moi:~$ 





  

Hors ligne

#14 Le 15/04/2019, à 19:31

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

j'ai changer de clavier, le phénomène a quasiment disparu
je passe donc en résolu
grands Merci a moko138 qui ma bien aidé
smile neutral

Hors ligne

#15 Le 17/04/2019, à 03:49

moko138

Re : [Réolu]votre avis sur mon hdd svp ?

Désolé, je ne comprends pas pourquoi, mais je n'avais pas vu tes dernières réponses.

Essaye de réserver, chaque fois que possible, ta prise usb3 (à haut débit) aux supports de stockage (disques, cartes, clefs).
Le haut débit n'est pas utile ni au clavier ni à la souris.

  Et reste vigilant sur l'état de ton Barracuda :

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH 
 10 Spin_Retry_Count        0x0013   100   100   097

n'augure pas d'une bonne longévité restante.


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#16 Le 17/04/2019, à 07:20

rogn...

Re : [Réolu]votre avis sur mon hdd svp ?

moko138 : je crois que tu as oublié un détail. Sa donnée est

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0

Sa vraie valeur est 0, pas 100 ou 97.
De toutes façons, comme je l'ai dit, chaque fois que j'ai eu un Seagate, les données Smart étaient bizarres. Depuis je ne travaille plus avec.
L'alerte commencera quand Linux le démontera puis le remontera en lecture seule.


Rogn on GitHub
Manjaro XFCE / Xubuntu 19.10
"Je pisse sur les Pommes de riches et les mises à jour de w$ qui foirent !" (A. Vatar)

Hors ligne

#17 Le 17/04/2019, à 08:17

moko138

Re : [Réolu]votre avis sur mon hdd svp ?

Bonjour rogn...,
  Il me semble au contraire, qu'il n'est pas rare que la colonne raw ne soit pas renseignée (et reste à sa valeur d'initialisation) pendant que c'est la colonne Threshold ("seuil") - qui, bizarrement, je le reconnais - affiche l'équivalent normalisé de raw.
(C'est même fréquent pour la ligne  "5 Reallocated_Sector_Ct".)
  Voilà pourquoi, sans me fier au raw à zéro, j'ai pointé la marge étroite entre 100 et 97.


  Le passage subit en lecture seule est symptomatique de l'usure matérielle de certains secteurs. Ce que je ne vois pas ici :

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0

%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#18 Le 17/04/2019, à 20:10

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

bonjour
je m’aperçois  que le sujet  a continué et j'en suis satisfait , 
il faut dire que cet ordi avais déjà  un bios UEFI- et a vrais dire c’est avec cette machine que j'ai appris d'installer  en EFI
""
je ne ne l'ai pas ménager non plus, j'ai une grosse part de responsabilité , sur son usure

bon si il est possible de le faire durer encore un peu cela m’arrangerais quitte a  a y mettre quelques euros ??

"""
autre chose je possède aussi un portable avec Ubuntu 18.04 avec un ssd et un hdd avec 8go de ram  une bombe
""
Merci a vous deux si vous avez d'autres conseils je suis preneur

smile  smile

Hors ligne

#19 Le 17/04/2019, à 20:55

rogn...

Re : [Réolu]votre avis sur mon hdd svp ?

bilougris a écrit :

Merci a vous deux si vous avez d'autres conseils je suis preneur

- L'achat d'un disque externe supplémentaire pour la sauvegarde de ton $HOME.
- Avec un second ordinateur, installe sur l'un des deux un serveur SSH, vu que tu es sur deux machines linux, ça sera encore plus facile. Tu pourras faire de la synchronisation entre ton $HOME sur la première machine et ton $HOME sur la seconde machine. Je fais ceci pour avoir les mêmes données quand je change de poste mais aussi si l'un des deux disques crève, j'ai l'autre machine qui est déjà prête. wink ---> Ouvre un autre sujet pour ce genre de pilotage.


Rogn on GitHub
Manjaro XFCE / Xubuntu 19.10
"Je pisse sur les Pommes de riches et les mises à jour de w$ qui foirent !" (A. Vatar)

Hors ligne

#20 Le 17/04/2019, à 21:39

bilougris

Re : [Réolu]votre avis sur mon hdd svp ?

entendu (rogn... )je vais étudier tes conseils
Merci
smile

Dernière modification par bilougris (Le 18/04/2019, à 04:00)

Hors ligne