Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 03/06/2019, à 05:34

bob2019

[Résolu] problème de démarrage sur une architecture 32 bits

Bonjour à toutes et tous,

heureux propriétaire d'un ACER 5610z smile ( si si ça existe) tournant sous Lubuntu, celui-ci a décidé de faire  des siennes.

Depuis environ un mois le démarrage pose problème, il s'allume et écran noir , acune action supplémentaire, les touches magique ne fonctionne pas, m'obligeant à l'éteindre en mode bourrin avec le bouton ON-OFF, ensuite il démarre en mode RECOVERY MODE et là tout fonctionne normalement. J'ai essayé l'outil réparateur de demarrage mais rien n'y fait.

Voici le rapport produit par le réparateur de demarrage

réparateur de demarrage

Si un Mc Gyver linuxien passe par là, je suis ouvert à toutes solutions !!!!

Merci d'avance

Dernière modification par bob2019 (Le 03/06/2019, à 18:55)

Hors ligne

#2 Le 03/06/2019, à 06:11

xubu1957

Re : [Résolu] problème de démarrage sur une architecture 32 bits

Bonjour,

Collage du Boot-Info :

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   156,301,311   156,299,264  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        fe030e59-f18a-4a82-abe5-032192af0df1   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jun  3 04:28 ata-Slimtype_DVD_A_DS8A1P -> ../../sr0
lrwxrwxrwx 1 root root  9 Jun  3 06:11 ata-WDC_WD800BEVS-22RST0_WD-WXE207F31609 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun  3 06:11 ata-WDC_WD800BEVS-22RST0_WD-WXE207F31609-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Jun  3 06:11 wwn-0x50014ee2002328be -> ../../sda
lrwxrwxrwx 1 root root 10 Jun  3 06:11 wwn-0x50014ee2002328be-part1 -> ../../sda1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  fe030e59-f18a-4a82-abe5-032192af0df1
else
  search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fe030e59-f18a-4a82-abe5-032192af0df1' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  fe030e59-f18a-4a82-abe5-032192af0df1
	else
	  search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
	fi
        linux	/boot/vmlinuz-4.15.0-50-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-50-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-fe030e59-f18a-4a82-abe5-032192af0df1' {
	menuentry 'Ubuntu, avec Linux 4.15.0-50-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-50-generic-advanced-fe030e59-f18a-4a82-abe5-032192af0df1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  fe030e59-f18a-4a82-abe5-032192af0df1
		else
		  search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
		fi
		echo	'Chargement de Linux 4.15.0-50-generic…'
	        linux	/boot/vmlinuz-4.15.0-50-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-50-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-50-generic-recovery-fe030e59-f18a-4a82-abe5-032192af0df1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  fe030e59-f18a-4a82-abe5-032192af0df1
		else
		  search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
		fi
		echo	'Chargement de Linux 4.15.0-50-generic…'
	        linux	/boot/vmlinuz-4.15.0-50-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-48-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-48-generic-advanced-fe030e59-f18a-4a82-abe5-032192af0df1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  fe030e59-f18a-4a82-abe5-032192af0df1
		else
		  search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
		fi
		echo	'Chargement de Linux 4.15.0-48-generic…'
	        linux	/boot/vmlinuz-4.15.0-48-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-48-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-48-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-48-generic-recovery-fe030e59-f18a-4a82-abe5-032192af0df1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  fe030e59-f18a-4a82-abe5-032192af0df1
		else
		  search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
		fi
		echo	'Chargement de Linux 4.15.0-48-generic…'
	        linux	/boot/vmlinuz-4.15.0-48-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-48-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  fe030e59-f18a-4a82-abe5-032192af0df1
	else
	  search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  fe030e59-f18a-4a82-abe5-032192af0df1
	else
	  search --no-floppy --fs-uuid --set=root fe030e59-f18a-4a82-abe5-032192af0df1
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=fe030e59-f18a-4a82-abe5-032192af0df1 /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  52.331878662 = 56.190926848   boot/grub/grub.cfg                             3
  48.393016815 = 51.961606144   boot/grub/i386-pc/core.img                     1
  49.414276123 = 53.058174976   boot/vmlinuz-4.15.0-48-generic                 1
  47.933807373 = 51.468533760   boot/vmlinuz-4.15.0-50-generic                 1
  47.933807373 = 51.468533760   vmlinuz                                        1
  49.414276123 = 53.058174976   vmlinuz.old                                    1
  49.190155029 = 52.817526784   boot/initrd.img-4.15.0-48-generic              1
  51.448242188 = 55.242129408   boot/initrd.img-4.15.0-50-generic              4
  51.448242188 = 55.242129408   initrd.img                                     4
  49.190155029 = 52.817526784   initrd.img.old                                 1


ADDITIONAL INFORMATION :
=================== log of boot-repair 20190603_0611 ===================
boot-repair version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-repair is executed in installed-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, i686)
CPU op-mode(s):      32-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-generic root=UUID=fe030e59-f18a-4a82-abe5-032192af0df1 ro quiet splash

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 18.04.2 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="fe030e59-f18a-4a82-abe5-032192af0df1" TYPE="ext4" PARTUUID="c7536574-01"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 avril 27 23:49 grub.d
total 80
-rwxr-xr-x 1 root root 10046 mars  18 17:11 00_header
-rwxr-xr-x 1 root root  6258 juil. 16  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17  2018 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 17  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 17  2018 40_custom
-rwxr-xr-x 1 root root   216 juil. 17  2018 41_custom
-rw-r--r-- 1 root root   483 juil. 17  2018 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not EFI-compatible.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, .

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:80.0GB:scsi:512:512:msdos:ATA WDC WD800BEVS-22:;
1:1049kB:80.0GB:80.0GB:ext4::boot;

=================== lsblk:
KNAME TYPE FSTYPE  SIZE LABEL
sda   disk        74,5G
sda1  part ext4   74,5G
sr0   rom         1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1007488k,nr_inodes=208702,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=205092k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12774)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=205088k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  984M     0  984M   0% /dev
tmpfs          tmpfs     201M  1.3M  200M   1% /run
/dev/sda1      ext4       73G   39G   31G  57% /
tmpfs          tmpfs    1002M   19M  984M   2% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs    1002M     0 1002M   0% /sys/fs/cgroup
tmpfs          tmpfs     201M   16K  201M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc7536574

Device     Boot Start       End   Sectors  Size Id Type
/dev/sda1  *     2048 156301311 156299264 74.5G 83 Linux




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== User settings
The settings chosen by the user will not act on the boot.

_ _ _

Vu :

48.393016815 = 51.961606144   boot/grub/i386-pc/core.img                     1
49.414276123 = 53.058174976   boot/vmlinuz-4.15.0-48-generic                 1
47.933807373 = 51.468533760   boot/vmlinuz-4.15.0-50-generic    

C'est une architecture 32 bits ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#3 Le 03/06/2019, à 06:13

bob2019

Re : [Résolu] problème de démarrage sur une architecture 32 bits

Oups, oui j'ai oublié de le préciser.

Hors ligne

#4 Le 03/06/2019, à 06:14

xubu1957

Re : [Résolu] problème de démarrage sur une architecture 32 bits

Regarde les messages de malbo./viewtopic.php?pid=22091989#p22091989 pour les noyaux récents.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#5 Le 03/06/2019, à 18:15

bob2019

Re : [Résolu] problème de démarrage sur une architecture 32 bits

Merci pour la solution et la rapidité smile, le démarrage est revenu !

Hors ligne

#6 Le 03/06/2019, à 18:20

xubu1957

Re : [Résolu] problème de démarrage sur une architecture 32 bits

Pour éditer ta discussion et rajouter [Résolu] au début du titre, et aussi sur une architecture 32 bits , il faut utiliser le bouton Modifier au bas de ton premier message.

Pour aider d'autres cas similaires .

[Résolu] problème de démarrage sur une architecture 32 bits

Merci wink


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne