Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#51 Le 11/07/2019, à 15:52

ylag

Re : Installation Mitsubishi CP-D70DW

Salut,

Ça semble maintenant se limiter à:

E [11/Jul/2019:13:56:56 +0200] [Job 51] Unable to open raster stream - : Broken pipe
...
D [11/Jul/2019:13:57:03 +0200] [Job 51] PID 2324 (/usr/lib/cups/filter/CP70Filter) stopped with status 102 (No such file or directory)
...
D [11/Jul/2019:13:57:03 +0200] [Job 51] GPL Ghostscript 9.26: Unrecoverable error, exit code 1
...
D [11/Jul/2019:13:57:03 +0200] [Job 51] PID 2323 (/usr/lib/cups/filter/gstoraster) stopped with status 1.

Pour l'erreur: Unable to open raster stream - : Broken pipe; je n'arrive pas à trouver d'explications satisfaisantes.
Faudrait vérifier que le fichier /usr/lib/cups/filter/CP70Filter soit bien présent avec les bons droits; ça semblait pourtant être le cas dans les retours au #26.
Quant à: (/usr/lib/cups/filter/gstoraster) stopped with status 1, peut-être tenter:

sudo apt install --reinstall cups-filters

Peut-être essayer de détruire et recrééer encore une fois l'imprimante dans l'interface cups ou via le gestionnaire d'imprimantes?

Serait bon de voir le retour de:

lpstat -s

...si tu lis l'anglais, il semble y avoir quelque chose d'intéressant concernant ton imprimante au paragraphe D) CUPS dye-sublimation backend de ce lien.

Sinon, modifier le fichier /etc/cups/cupsd.conf et changer la valeur LogLevel warn pour LogLevel debug, ce qui devrait rendre le fichier
/var/log/cups/error_log plus verbeux ?

Il y a sûrement moyen d'arriver à faire fonctionner cet appareil... hmm

A+

Dernière modification par ylag (Le 11/07/2019, à 16:42)

Hors ligne

#52 Le 11/07/2019, à 17:45

moustach

Re : Installation Mitsubishi CP-D70DW

Suite aux manips demandées voici les logs :

W [11/Jul/2019:18:41:13 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MITSUBISHI_CP60D70D707D-Gray..\' already exists
W [11/Jul/2019:18:41:13 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MITSUBISHI_CP60D70D707D-RGB..\' already exists
W [11/Jul/2019:18:41:17 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MITSUBISHI_CP60D70D707D-Gray..\' already exists
W [11/Jul/2019:18:41:17 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'MITSUBISHI_CP60D70D707D-RGB..\' already exists
E [11/Jul/2019:18:41:25 +0200] [Job 57] Unable to open raster stream - : Broken pipe
E [11/Jul/2019:18:41:33 +0200] [Job 57] Job stopped due to filter errors; please consult the error_log file for details.
D [11/Jul/2019:18:41:33 +0200] [Job 57] The following messages were recorded from 18:41:25 to 18:41:33
D [11/Jul/2019:18:41:33 +0200] [Job 57] Applying default options...
D [11/Jul/2019:18:41:33 +0200] [Job 57] Adding start banner page "none".
D [11/Jul/2019:18:41:33 +0200] [Job 57] Adding end banner page "none".
D [11/Jul/2019:18:41:33 +0200] [Job 57] File of type application/vnd.cups-pdf-banner queued by "nouvellecuisine".
D [11/Jul/2019:18:41:33 +0200] [Job 57] hold_until=0
D [11/Jul/2019:18:41:33 +0200] [Job 57] Queued on "MITSUBISHI_CP60D70D707D" by "nouvellecuisine".
D [11/Jul/2019:18:41:33 +0200] [Job 57] time-at-processing=1562863285
D [11/Jul/2019:18:41:33 +0200] [Job 57] 4 filters for job:
D [11/Jul/2019:18:41:33 +0200] [Job 57] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
D [11/Jul/2019:18:41:33 +0200] [Job 57] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [11/Jul/2019:18:41:33 +0200] [Job 57] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [11/Jul/2019:18:41:33 +0200] [Job 57] /usr/lib/cups/filter/CP70Filter (application/vnd.cups-raster to printer/MITSUBISHI_CP60D70D707D, cost 0)
D [11/Jul/2019:18:41:33 +0200] [Job 57] job-sheets=none,none
D [11/Jul/2019:18:41:33 +0200] [Job 57] argv[0]="MITSUBISHI_CP60D70D707D"
D [11/Jul/2019:18:41:33 +0200] [Job 57] argv[1]="57"
D [11/Jul/2019:18:41:33 +0200] [Job 57] argv[2]="nouvellecuisine"
D [11/Jul/2019:18:41:33 +0200] [Job 57] argv[3]="Test Page"
D [11/Jul/2019:18:41:33 +0200] [Job 57] argv[4]="1"
D [11/Jul/2019:18:41:33 +0200] [Job 57] argv[5]="job-uuid=urn:uuid:cf1869e3-0097-390c-6c7f-f3dc18443e38 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1562863285 time-at-processing=1562863285"
D [11/Jul/2019:18:41:33 +0200] [Job 57] argv[6]="/var/spool/cups/d00057-001"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[7]="CUPS_STATEDIR=/run/cups"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[8]="HOME=/var/spool/cups/tmp"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[10]="SERVER_ADMIN=root@nouvellecuisine-chiz"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[11]="SOFTWARE=CUPS/2.2.7"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[13]="USER=root"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[14]="CUPS_MAX_MESSAGE=2047"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[17]="IPP_PORT=631"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[18]="CHARSET=utf-8"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[19]="LANG=fr.UTF-8"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[20]="PPD=/etc/cups/ppd/MITSUBISHI_CP60D70D707D.ppd"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[21]="RIP_MAX_CACHE=128m"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[22]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[23]="DEVICE_URI=usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[24]="PRINTER_INFO=MITSUBISHI CP60D70D707D"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[25]="PRINTER_LOCATION="
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[26]="PRINTER=MITSUBISHI_CP60D70D707D"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[27]="PRINTER_STATE_REASONS=none"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[28]="CUPS_FILETYPE=document"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[30]="AUTH_I****"
D [11/Jul/2019:18:41:33 +0200] [Job 57] Started filter /usr/lib/cups/filter/bannertopdf (PID 12353)
D [11/Jul/2019:18:41:33 +0200] [Job 57] Started filter /usr/lib/cups/filter/pdftopdf (PID 12355)
D [11/Jul/2019:18:41:33 +0200] [Job 57] Started filter /usr/lib/cups/filter/gstoraster (PID 12356)
D [11/Jul/2019:18:41:33 +0200] [Job 57] Started filter /usr/lib/cups/filter/CP70Filter (PID 12357)
D [11/Jul/2019:18:41:33 +0200] [Job 57] Started backend /usr/lib/cups/backend/usb (PID 12358)
D [11/Jul/2019:18:41:33 +0200] [Job 57] execv failed: No such file or directory
D [11/Jul/2019:18:41:33 +0200] [Job 57] PID 12357 (/usr/lib/cups/filter/CP70Filter) stopped with status 102 (No such file or directory)
D [11/Jul/2019:18:41:33 +0200] [Job 57] Hint: Try setting the LogLevel to "debug" to find out more.
D [11/Jul/2019:18:41:33 +0200] [Job 57] OUTFORMAT=\"(null)\", so output format will be CUPS/PWG Raster
D [11/Jul/2019:18:41:33 +0200] [Job 57] pdftopdf: Last filter determined by the PPD: CP70Filter; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [11/Jul/2019:18:41:33 +0200] [Job 57] Loading USB quirks from \"/usr/share/cups/usb\".
D [11/Jul/2019:18:41:33 +0200] [Job 57] Loaded 88 quirks.
D [11/Jul/2019:18:41:33 +0200] [Job 57] Printing on printer with URI: usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060
D [11/Jul/2019:18:41:33 +0200] [Job 57] PDF template file doesn\'t have form. It\'s okay.
D [11/Jul/2019:18:41:33 +0200] [Job 57] libusb_get_device_list=11
D [11/Jul/2019:18:41:33 +0200] [Job 57] STATE: +connecting-to-device
D [11/Jul/2019:18:41:33 +0200] [Job 57] STATE: -connecting-to-device
D [11/Jul/2019:18:41:33 +0200] [Job 57] Color Manager: Calibration Mode/Off
D [11/Jul/2019:18:41:33 +0200] [Job 57] PID 12353 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
D [11/Jul/2019:18:41:33 +0200] [Job 57] PID 12355 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [11/Jul/2019:18:41:33 +0200] [Job 57] Calling FindDeviceById(cups-MITSUBISHI_CP60D70D707D)
D [11/Jul/2019:18:41:33 +0200] [Job 57] Printer found with device ID: MFG:MITSUBISHI;CMD:MEL;MDL:CP60D70D707D;CLS:PRINTER;DES:MITSUBISHI CP60D70D707D Device URI: usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060
D [11/Jul/2019:18:41:33 +0200] [Job 57] Device protocol: 2
D [11/Jul/2019:18:41:33 +0200] [Job 57] Sending data to printer.
D [11/Jul/2019:18:41:33 +0200] [Job 57] Sent 0 bytes...
D [11/Jul/2019:18:41:33 +0200] [Job 57] Found device /org/freedesktop/ColorManager/devices/cups_MITSUBISHI_CP60D70D707D
D [11/Jul/2019:18:41:33 +0200] [Job 57] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [11/Jul/2019:18:41:33 +0200] [Job 57] Calling FindDeviceById(cups-MITSUBISHI_CP60D70D707D)
D [11/Jul/2019:18:41:33 +0200] [Job 57] Found device /org/freedesktop/ColorManager/devices/cups_MITSUBISHI_CP60D70D707D
D [11/Jul/2019:18:41:33 +0200] [Job 57] Calling GetProfileForQualifiers(RGB..300dpi...)
D [11/Jul/2019:18:41:33 +0200] [Job 57] Failed to send: org.freedesktop.ColorManager.Device.NothingMatched:nothing matched expression \'RGB..300dpi,RGB..*,RGB.*.300dpi,RGB.*.*,*\'
D [11/Jul/2019:18:41:33 +0200] [Job 57] Failed to get profile filename for cups-MITSUBISHI_CP60D70D707D
D [11/Jul/2019:18:41:33 +0200] [Job 57] Color Manager: no profiles specified in PPD
D [11/Jul/2019:18:41:33 +0200] [Job 57] Color Manager: ICC Profile: None
D [11/Jul/2019:18:41:33 +0200] [Job 57] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [11/Jul/2019:18:41:33 +0200] [Job 57] Ghostscript command line: gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -r300x300 -dDEVICEWIDTHPOINTS=448 -dDEVICEHEIGHTPOINTS=295 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -scupsPageSizeName=ME_10x15 -I/usr/share/cups/fonts -c \'<</.HWMargins[0.000000 0.000000 0.000000 0.000000] /Margins[0 0]>>setpagedevice\' -f -_
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[7]=\"CUPS_STATEDIR=/run/cups\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[10]=\"SERVER_ADMIN=root@nouvellecuisine-chiz\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[11]=\"SOFTWARE=CUPS/2.2.7\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[12]=\"USER=root\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[13]=\"CUPS_MAX_MESSAGE=2047\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[14]=\"CUPS_SERVER=/run/cups/cups.sock\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[15]=\"CUPS_ENCRYPTION=IfRequested\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[16]=\"IPP_PORT=631\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[17]=\"CHARSET=utf-8\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[18]=\"LANG=fr.UTF-8\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[19]=\"PPD=/etc/cups/ppd/MITSUBISHI_CP60D70D707D.ppd\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[20]=\"RIP_MAX_CACHE=128m\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[21]=\"CONTENT_TYPE=application/vnd.cups-pdf-banner\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[22]=\"DEVICE_URI=usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[23]=\"PRINTER_INFO=MITSUBISHI CP60D70D707D\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[24]=\"PRINTER_LOCATION=\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[25]=\"PRINTER=MITSUBISHI_CP60D70D707D\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[26]=\"PRINTER_STATE_REASONS=none\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[27]=\"CUPS_FILETYPE=document\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[28]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] envp[29]=\"AUTH_INFO_REQUIRED=none\"
D [11/Jul/2019:18:41:33 +0200] [Job 57] Start rendering...
D [11/Jul/2019:18:41:33 +0200] [Job 57] Processing page 1...
D [11/Jul/2019:18:41:33 +0200] [Job 57] Error: /ioerror in --showpage--
D [11/Jul/2019:18:41:33 +0200] [Job 57] Operand stack:
D [11/Jul/2019:18:41:33 +0200] [Job 57] true   (/tmp/gs_uqqN5J)   --nostringval--   1   true
D [11/Jul/2019:18:41:33 +0200] [Job 57] Execution stack:
D [11/Jul/2019:18:41:33 +0200] [Job 57] %interp_exit   .runexec2   --nostringval--   showpage   --nostringval--   2   %stopped_push   --nostringval--   showpage   showpage   false   1   %stopped_push   2045   2   3   %oparray_pop   2044   2   3   %oparray_pop   2025   2   3   %oparray_pop   showpage   2026   4   3   %oparray_pop   showpage   showpage   2   1   1   showpage   %for_pos_int_continue   2029   4   7   %oparray_pop   showpage   showpage   1890   3   9   %oparray_pop   showpage   showpage
D [11/Jul/2019:18:41:33 +0200] [Job 57] Dictionary stack:
D [11/Jul/2019:18:41:33 +0200] [Job 57] --dict:968/1684(ro)(G)--   --dict:1/20(G)--   --dict:82/200(L)--   --dict:82/200(L)--   --dict:133/256(ro)(G)--   --dict:311/450(ro)(G)--   --dict:32/32(L)--   --dict:6/9(L)--   --dict:7/20(L)--
D [11/Jul/2019:18:41:33 +0200] [Job 57] Current allocation mode is local
D [11/Jul/2019:18:41:33 +0200] [Job 57] Last OS error: Broken pipe
D [11/Jul/2019:18:41:33 +0200] [Job 57] GPL Ghostscript 9.26: Unrecoverable error, exit code 1
D [11/Jul/2019:18:41:33 +0200] [Job 57] Rendering completed
D [11/Jul/2019:18:41:33 +0200] [Job 57] PID 12356 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [11/Jul/2019:18:41:33 +0200] [Job 57] Hint: Try setting the LogLevel to "debug" to find out more.
D [11/Jul/2019:18:41:33 +0200] [Job 57] Waiting for read thread to exit...
D [11/Jul/2019:18:41:33 +0200] [Job 57] Read thread still active, aborting the pending read...
D [11/Jul/2019:18:41:33 +0200] [Job 57] PID 12358 (/usr/lib/cups/backend/usb) exited with no errors.
D [11/Jul/2019:18:41:33 +0200] [Job 57] End of messages
D [11/Jul/2019:18:41:33 +0200] [Job 57] printer-state=3(idle)
D [11/Jul/2019:18:41:33 +0200] [Job 57] printer-state-message="Rendering completed"
D [11/Jul/2019:18:41:33 +0200] [Job 57] printer-state-reasons=none

Et pour le lpstat -s

no system default destination
matériel pour MITSUBISHI_CP60D70D707D : usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060

Oui je comprends à peu prêt l'anglais mais je vois pas en quoi ça m'aide ce lien :S

Hors ligne

#53 Le 11/07/2019, à 21:55

ylag

Re : Installation Mitsubishi CP-D70DW

Salut,

D'après cette discussion: cups-ghostscript-and-memory-errors, il semblerait que régler la valeur  de RIPCache à 512m (128m par défaut) dans cupsd.conf pourrait faire une différence. La discussion mentionne Ubuntu 16.04, mais je crois que ça pourrait aussi s'appliquer à la 18.04.

Il s'agit d'ajouter la ligne suivante:

RIPCache 512m

...en début du fichier /etc/cups/cupsd.conf, puis de relancer le service cups:

sudo systemctl restart cups.service

...avant de retenter une impression.

Voir:

man cupsd.conf

...au sujet de RIPCache.

Si ça ne fonctionne pas, simplement retirer la ligne ajoutée à cpusd.conf et relancer le service cups.

A+

Dernière modification par ylag (Le 11/07/2019, à 22:02)

Hors ligne

#54 Le 12/07/2019, à 08:54

moustach

Re : Installation Mitsubishi CP-D70DW

Toujours cette erreur "Filter Failed" quand je lance une impression de page Test

Dois-je downgrade ma version ?

Voilà les logs :

D [12/Jul/2019:09:49:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [12/Jul/2019:09:49:40 +0200] [Client 24] Server address is "127.0.0.1".
D [12/Jul/2019:09:49:40 +0200] [Client 24] Accepted from localhost:41060 (IPv4)
D [12/Jul/2019:09:49:40 +0200] [Client 24] Waiting for request.
I [12/Jul/2019:09:49:40 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:40 +0200] [Job 57] Unloading...
D [12/Jul/2019:09:49:40 +0200] [Job 58] Unloading...
I [12/Jul/2019:09:49:41 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:42 +0200] [Client 24] POST /printers/MITSUBISHI_CP60D70D707D HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jul/2019:09:49:42 +0200] [Client 24] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 24] Authorized as "nouvellecuisine" using Basic.
D [12/Jul/2019:09:49:42 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@nouvellecuisine-chiz"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/2.2.7"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[13] = "USER=root"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[18] = "AUTH_TYPE=Basic"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[19] = "LANG=fr.UTF8"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[22] = "SERVER_NAME=localhost"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[23] = "SERVER_PORT=631"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[24] = "REMOTE_ADDR=127.0.0.1"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[26] = "SCRIPT_NAME=/printers/MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/printers/MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[28] = "PATH_INFO=/MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[29] = "REMOTE_USER=nouvellecuisine"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[30] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[31] = "HTTP_COOKIE=org.cups.sid=46570f192e3cf77d48e1e573b1df888e"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[32] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:67.0) Gecko/20100101 Firefox/67.0"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[33] = "HTTP_REFERER=http://localhost:631/printers/MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[34] = "REQUEST_METHOD=POST"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[35] = "CONTENT_LENGTH=64"
D [12/Jul/2019:09:49:42 +0200] [CGI] envp[36] = "CONTENT_TYPE=application/x-www-form-urlencoded"
D [12/Jul/2019:09:49:42 +0200] cupsdAddCert: Adding certificate for PID 16102
D [12/Jul/2019:09:49:42 +0200] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 16102)
I [12/Jul/2019:09:49:42 +0200] [Client 24] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=16102, file=19)
D [12/Jul/2019:09:49:42 +0200] [Client 24] Waiting for CGI data.
I [12/Jul/2019:09:49:42 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:42 +0200] [CGI] org.cups.sid cookie is \"46570f192e3cf77d48e1e573b1df888e\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: org.cups.sid=\"46570f192e3cf77d48e1e573b1df888e\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: OP=\"print-test-page\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: PRINTER_NAME=\"MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jul/2019:09:49:42 +0200] [Client 25] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:42 +0200] [Client 25] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:42 +0200] [Client 25] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] [Client 25] POST /printers/MITSUBISHI_CP60D70D707D HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [12/Jul/2019:09:49:42 +0200] [Client 25] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 25] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 25] 2.0 Print-Job 1
D [12/Jul/2019:09:49:42 +0200] Print-Job ipp://localhost:631/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Job ???] Auto-typing file...
I [12/Jul/2019:09:49:42 +0200] [Job ???] Request file type is application/vnd.cups-pdf-banner.
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(---J-)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [12/Jul/2019:09:49:42 +0200] [Job 59] Applying default options...
D [12/Jul/2019:09:49:42 +0200] add_job: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:42 +0200] Adding default job-sheets values "none,none"...
I [12/Jul/2019:09:49:42 +0200] [Job 59] Adding start banner page "none".
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(---J-)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [12/Jul/2019:09:49:42 +0200] [Job 59] Adding end banner page "none".
I [12/Jul/2019:09:49:42 +0200] [Job 59] File of type application/vnd.cups-pdf-banner queued by "nouvellecuisine".
D [12/Jul/2019:09:49:42 +0200] [Job 59] hold_until=0
I [12/Jul/2019:09:49:42 +0200] [Job 59] Queued on "MITSUBISHI_CP60D70D707D" by "nouvellecuisine".
D [12/Jul/2019:09:49:42 +0200] [Job 59] time-at-processing=1562917782
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(---J-)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] 4 filters for job:
D [12/Jul/2019:09:49:42 +0200] [Job 59] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
D [12/Jul/2019:09:49:42 +0200] [Job 59] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [12/Jul/2019:09:49:42 +0200] [Job 59] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [12/Jul/2019:09:49:42 +0200] [Job 59] /usr/lib/cups/filter/CP70Filter (application/vnd.cups-raster to printer/MITSUBISHI_CP60D70D707D, cost 0)
D [12/Jul/2019:09:49:42 +0200] [Job 59] job-sheets=none,none
D [12/Jul/2019:09:49:42 +0200] [Job 59] argv[0]="MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:42 +0200] [Job 59] argv[1]="59"
D [12/Jul/2019:09:49:42 +0200] [Job 59] argv[2]="nouvellecuisine"
D [12/Jul/2019:09:49:42 +0200] [Job 59] argv[3]="Test Page"
D [12/Jul/2019:09:49:42 +0200] [Job 59] argv[4]="1"
D [12/Jul/2019:09:49:42 +0200] [Job 59] argv[5]="job-uuid=urn:uuid:f152cace-5d82-3293-7ee4-6752841031c6 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1562917782 time-at-processing=1562917782"
D [12/Jul/2019:09:49:42 +0200] [Job 59] argv[6]="/var/spool/cups/d00059-001"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[7]="CUPS_STATEDIR=/run/cups"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[8]="HOME=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[10]="SERVER_ADMIN=root@nouvellecuisine-chiz"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[11]="SOFTWARE=CUPS/2.2.7"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[13]="USER=root"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[14]="CUPS_MAX_MESSAGE=2047"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[17]="IPP_PORT=631"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[18]="CHARSET=utf-8"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[19]="LANG=fr.UTF-8"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[20]="PPD=/etc/cups/ppd/MITSUBISHI_CP60D70D707D.ppd"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[21]="RIP_MAX_CACHE=512m"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[22]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[23]="DEVICE_URI=usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[24]="PRINTER_INFO=MITSUBISHI CP60D70D707D"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[25]="PRINTER_LOCATION="
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[26]="PRINTER=MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[27]="PRINTER_STATE_REASONS=none"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[28]="CUPS_FILETYPE=document"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[30]="AUTH_I****"
I [12/Jul/2019:09:49:42 +0200] [Job 59] Started filter /usr/lib/cups/filter/bannertopdf (PID 16105)
I [12/Jul/2019:09:49:42 +0200] [Job 59] Started filter /usr/lib/cups/filter/pdftopdf (PID 16106)
I [12/Jul/2019:09:49:42 +0200] [Job 59] Started filter /usr/lib/cups/filter/gstoraster (PID 16107)
I [12/Jul/2019:09:49:42 +0200] [Job 59] Started filter /usr/lib/cups/filter/CP70Filter (PID 16108)
I [12/Jul/2019:09:49:42 +0200] [Job 59] Started backend /usr/lib/cups/backend/usb (PID 16109)
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 25] Returning IPP successful-ok for Print-Job (ipp://localhost:631/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 25] Content-Length: 189
D [12/Jul/2019:09:49:42 +0200] [Client 25] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Job 59] PID 16108 (/usr/lib/cups/filter/CP70Filter) stopped with status 102 (No such file or directory)
D [12/Jul/2019:09:49:42 +0200] [Client 25] con->http=0x561435a79eb0
D [12/Jul/2019:09:49:42 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=189, response=0x561435a81fc0(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 25] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 25] bytes=0, http_state=0, data_remaining=189
D [12/Jul/2019:09:49:42 +0200] [Client 25] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 25] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 25] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] JobCreated
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] PrinterStateChanged
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 Get-Notifications 389
D [12/Jul/2019:09:49:42 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:42 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 1697
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:42 +0200] [Client 26] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] [Job 59] execv failed: No such file or directory
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1697, response=0x561435a81960(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=1697
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:42 +0200] [Client 27] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:42 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetArray: job_uri[0]=\"/jobs/59\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetArray: job_id[0]=\"59\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetArray: job_state[0]=\"3\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetArray: job_state_message[0]=\"\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetArray: job_state_reasons[0]=\"none\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: refresh_page=\"2;URL=/printers/MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:42 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 26] 2.0 Get-Job-Attributes 491
D [12/Jul/2019:09:49:42 +0200] Get-Job-Attributes ipp://localhost/jobs/59
D [12/Jul/2019:09:49:42 +0200] [Client 26] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/59) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 26] Content-Length: 189
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=189, response=0x561435a802d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] bytes=0, http_state=0, data_remaining=189
D [12/Jul/2019:09:49:42 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 27] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 27] 2.0 CUPS-Get-Printers 492
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:42 +0200] [Client 27] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 27] Content-Length: 1233
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] con->http=0x561435a89d30
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a81aa0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:42 +0200] [Client 27] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Client 27] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 27] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 27] 2.0 CUPS-Get-Default 493
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 27] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 27] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] con->http=0x561435a89d30
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a802d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 27] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: TITLE=\"Imprimer la page de test\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:42 +0200] [Client 24] CGI data ready to be sent.
D [12/Jul/2019:09:49:42 +0200] [Client 24] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=16102, file=19
D [12/Jul/2019:09:49:42 +0200] [Client 24] Waiting for CGI data.
D [12/Jul/2019:09:49:42 +0200] [Client 24] Script header: Content-Type: text/html;charset=utf-8
D [12/Jul/2019:09:49:42 +0200] [Client 24] Script header: 
D [12/Jul/2019:09:49:42 +0200] [Client 24] Sending status 200 for CGI.
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [CGI] cgiSetVariable: PRINTER_NAME=\"MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:42 +0200] [Client 24] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16102, file=19
D [12/Jul/2019:09:49:42 +0200] [Client 24] Waiting for CGI data.
D [12/Jul/2019:09:49:42 +0200] [Client 24] CGI data ready to be sent.
D [12/Jul/2019:09:49:42 +0200] [Client 25] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:42 +0200] [Client 25] Closing connection.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 24] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16102, file=19
D [12/Jul/2019:09:49:42 +0200] [Client 24] Waiting for CGI data.
D [12/Jul/2019:09:49:42 +0200] [Client 24] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16102, file=19
D [12/Jul/2019:09:49:42 +0200] [Client 24] Waiting for CGI data.
D [12/Jul/2019:09:49:42 +0200] [Client 24] CGI data ready to be sent.
D [12/Jul/2019:09:49:42 +0200] [Client 24] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16102, file=19
D [12/Jul/2019:09:49:42 +0200] [Client 24] Waiting for CGI data.
D [12/Jul/2019:09:49:42 +0200] [Client 24] Sending 0-length chunk.
D [12/Jul/2019:09:49:42 +0200] [Client 24] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 24] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 24] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] pdftopdf: Last filter determined by the PPD: CP70Filter; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 28] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:42 +0200] [Client 28] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:42 +0200] [Client 28] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] [Client 28] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 28] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 28] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 28] 2.0 Get-Job-Attributes 390
D [12/Jul/2019:09:49:42 +0200] Get-Job-Attributes ipp://localhost/jobs/59
D [12/Jul/2019:09:49:42 +0200] [Client 28] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/59) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 28] Content-Length: 121
D [12/Jul/2019:09:49:42 +0200] [Client 28] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] PID 16102 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [12/Jul/2019:09:49:42 +0200] [Client 28] con->http=0x561435a79eb0
D [12/Jul/2019:09:49:42 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=121, response=0x561435a83c40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 28] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 28] bytes=0, http_state=0, data_remaining=121
D [12/Jul/2019:09:49:42 +0200] [Client 28] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 28] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 28] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 26] 2.0 Get-Jobs 494
D [12/Jul/2019:09:49:42 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 26] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 26] Content-Length: 411
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 28] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:42 +0200] [Client 28] Closing connection.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x561435a80340(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] bytes=0, http_state=0, data_remaining=411
D [12/Jul/2019:09:49:42 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 29] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:42 +0200] [Client 29] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:42 +0200] [Client 29] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] [Client 29] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 29] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 29] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 29] 2.0 Get-Job-Attributes 391
D [12/Jul/2019:09:49:42 +0200] Get-Job-Attributes ipp://localhost/jobs/59
D [12/Jul/2019:09:49:42 +0200] [Client 29] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/59) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 29] Content-Length: 121
D [12/Jul/2019:09:49:42 +0200] [Client 29] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 29] con->http=0x561435a79eb0
D [12/Jul/2019:09:49:42 +0200] [Client 29] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=121, response=0x561435a1bbe0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 29] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 29] bytes=0, http_state=0, data_remaining=121
D [12/Jul/2019:09:49:42 +0200] [Client 29] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 29] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 29] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 29] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:42 +0200] [Client 29] Closing connection.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] OUTFORMAT=\"(null)\", so output format will be CUPS/PWG Raster
D [12/Jul/2019:09:49:42 +0200] [Job 59] PDF template file doesn\'t have form. It\'s okay.
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 Get-Notifications 392
D [12/Jul/2019:09:49:42 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:42 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 127
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x561435a80360(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=127
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] Loading USB quirks from \"/usr/share/cups/usb\".
D [12/Jul/2019:09:49:42 +0200] [Job 59] Loaded 88 quirks.
D [12/Jul/2019:09:49:42 +0200] [Job 59] Printing on printer with URI: usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060
D [12/Jul/2019:09:49:42 +0200] [Job 59] Color Manager: Calibration Mode/Off
D [12/Jul/2019:09:49:42 +0200] [Job 59] PID 16105 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
D [12/Jul/2019:09:49:42 +0200] [Job 59] PID 16106 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [12/Jul/2019:09:49:42 +0200] [Job 59] Calling FindDeviceById(cups-MITSUBISHI_CP60D70D707D)
D [12/Jul/2019:09:49:42 +0200] [Job 59] libusb_get_device_list=11
D [12/Jul/2019:09:49:42 +0200] [Job 59] STATE: +connecting-to-device
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(---J-)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] PrinterStateChanged
D [12/Jul/2019:09:49:42 +0200] [Job 59] STATE: -connecting-to-device
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(---J-)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] Found device /org/freedesktop/ColorManager/devices/cups_MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Job 59] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] PrinterStateChanged
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 Get-Notifications 393
D [12/Jul/2019:09:49:42 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:42 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 1067
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1067, response=0x561435a11060(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=1067
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 26] 2.0 CUPS-Get-Printers 495
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:42 +0200] [Client 26] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 26] Content-Length: 1233
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Printers 394
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 1233
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a10df0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:42 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] Calling FindDeviceById(cups-MITSUBISHI_CP60D70D707D)
D [12/Jul/2019:09:49:42 +0200] [Client 27] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 27] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 27] 2.0 CUPS-Get-Default 496
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 27] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 27] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a11a10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 26] 2.0 CUPS-Get-Default 497
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 26] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 26] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] con->http=0x561435a89d30
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a11060(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 27] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Default 395
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a11ee0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] Found device /org/freedesktop/ColorManager/devices/cups_MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Job 59] Calling GetProfileForQualifiers(RGB..300dpi...)
D [12/Jul/2019:09:49:42 +0200] [Job 59] Found profile /org/freedesktop/ColorManager/profiles/MITSUBISHI_CP60D70D707D_RGB__
D [12/Jul/2019:09:49:42 +0200] [Job 59] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [12/Jul/2019:09:49:42 +0200] [Job 59] Use profile filename: \'\'
D [12/Jul/2019:09:49:42 +0200] [Job 59] Color Manager: ICC Profile: 
D [12/Jul/2019:09:49:42 +0200] [Job 59] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 30] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:42 +0200] [Client 30] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:42 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a10df0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] Ghostscript command line: gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -r300x300 -dDEVICEWIDTHPOINTS=448 -dDEVICEHEIGHTPOINTS=295 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -scupsPageSizeName=ME_10x15 -I/usr/share/cups/fonts -c \'<</.HWMargins[0.000000 0.000000 0.000000 0.000000] /Margins[0 0]>>setpagedevice\' -f -_
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[7]=\"CUPS_STATEDIR=/run/cups\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[10]=\"SERVER_ADMIN=root@nouvellecuisine-chiz\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[11]=\"SOFTWARE=CUPS/2.2.7\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[12]=\"USER=root\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[13]=\"CUPS_MAX_MESSAGE=2047\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[14]=\"CUPS_SERVER=/run/cups/cups.sock\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[15]=\"CUPS_ENCRYPTION=IfRequested\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[16]=\"IPP_PORT=631\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[17]=\"CHARSET=utf-8\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[18]=\"LANG=fr.UTF-8\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[19]=\"PPD=/etc/cups/ppd/MITSUBISHI_CP60D70D707D.ppd\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[20]=\"RIP_MAX_CACHE=512m\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[21]=\"CONTENT_TYPE=application/vnd.cups-pdf-banner\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[22]=\"DEVICE_URI=usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[23]=\"PRINTER_INFO=MITSUBISHI CP60D70D707D\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[24]=\"PRINTER_LOCATION=\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[25]=\"PRINTER=MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[26]=\"PRINTER_STATE_REASONS=none\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[27]=\"CUPS_FILETYPE=document\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[28]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [12/Jul/2019:09:49:42 +0200] [Job 59] envp[29]=\"AUTH_INFO_REQUIRED=none\"
D [12/Jul/2019:09:49:42 +0200] [Client 30] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 30] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 30] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 30] 2.0 CUPS-Get-Printers 498
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:42 +0200] [Client 30] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 30] Content-Length: 1233
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] con->http=0x561435a8cf40
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a11060(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:42 +0200] [Client 30] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 30] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Client 30] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 30] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 30] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 30] 2.0 CUPS-Get-Default 499
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 30] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 30] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] con->http=0x561435a8cf40
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a12120(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 30] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 30] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] Device protocol: 2
D [12/Jul/2019:09:49:42 +0200] [Client 24] GET /cups.css HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 24] Read: status=200, state=3
D [12/Jul/2019:09:49:42 +0200] [Client 24] Authorized as "nouvellecuisine" using Basic.
D [12/Jul/2019:09:49:42 +0200] [Client 24] Processing GET /cups.css
D [12/Jul/2019:09:49:42 +0200] [Client 24] filename="/usr/share/cups/doc-root/cups.css", type=text/css
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdSendHeader: code=200, type="text/css", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 24] Sending file.
D [12/Jul/2019:09:49:42 +0200] [Client 24] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=19
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 31] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:42 +0200] [Client 31] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:42 +0200] [Client 31] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] [Client 27] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 27] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 27] 2.0 Get-Jobs 501
D [12/Jul/2019:09:49:42 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 27] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 27] Content-Length: 411
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 30] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 30] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 30] 2.0 CUPS-Get-Default 502
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 30] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 30] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 26] 2.0 CUPS-Get-Default 503
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 26] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 26] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Default 396
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Job 59] Sending data to printer.
D [12/Jul/2019:09:49:42 +0200] [Job 59] Sent 0 bytes...
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 24] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=19
D [12/Jul/2019:09:49:42 +0200] [Client 27] con->http=0x561435a89d30
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x561435a10f20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] bytes=0, http_state=0, data_remaining=411
D [12/Jul/2019:09:49:42 +0200] [Client 27] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 30] con->http=0x561435a8cf40
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a83c80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 30] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 30] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a92040(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a7cdb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 31] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 31] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 31] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 31] 2.0 Get-Printer-Attributes 500
D [12/Jul/2019:09:49:42 +0200] Get-Printer-Attributes ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 31] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 31] Content-Length: 101
D [12/Jul/2019:09:49:42 +0200] [Client 31] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] PrinterStateChanged
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Client 24] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=19
D [12/Jul/2019:09:49:42 +0200] [Client 24] Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:42 +0200] [Client 24] Closing connection.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 31] con->http=0x561435a957b0
D [12/Jul/2019:09:49:42 +0200] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x561435a7cce0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 31] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 31] bytes=0, http_state=0, data_remaining=101
D [12/Jul/2019:09:49:42 +0200] [Client 31] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 31] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 31] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Printers 397
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 1233
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a7cdb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Default 398
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a7cce0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 30] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 30] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 30] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 30] 2.0 Get-Printer-Attributes 504
D [12/Jul/2019:09:49:42 +0200] Get-Printer-Attributes ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 30] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 30] Content-Length: 101
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] con->http=0x561435a8cf40
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x561435a7cdb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] bytes=0, http_state=0, data_remaining=101
D [12/Jul/2019:09:49:42 +0200] [Client 30] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 30] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 32] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:42 +0200] [Client 32] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:42 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 26] 2.0 Get-Printer-Attributes 506
D [12/Jul/2019:09:49:42 +0200] Get-Printer-Attributes ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 26] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 26] Content-Length: 101
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 31] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 31] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 31] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 31] 2.0 Get-Jobs 507
D [12/Jul/2019:09:49:42 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 31] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 31] Content-Length: 411
D [12/Jul/2019:09:49:42 +0200] [Client 31] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x561435a92a90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] bytes=0, http_state=0, data_remaining=101
D [12/Jul/2019:09:49:42 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 31] con->http=0x561435a957b0
D [12/Jul/2019:09:49:42 +0200] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x561435a10f20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 31] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 31] bytes=0, http_state=0, data_remaining=411
D [12/Jul/2019:09:49:42 +0200] [Client 31] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 31] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 31] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 32] 2.0 Get-Jobs 505
D [12/Jul/2019:09:49:42 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 32] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 32] Content-Length: 411
D [12/Jul/2019:09:49:42 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x5614359f2d50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 32] bytes=0, http_state=0, data_remaining=411
D [12/Jul/2019:09:49:42 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 27] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 27] 2.0 CUPS-Get-Printers 508
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:42 +0200] [Client 27] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 27] Content-Length: 1233
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] con->http=0x561435a89d30
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a10f20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:42 +0200] [Client 27] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 27] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 27] 2.0 CUPS-Get-Default 509
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 27] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 27] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] con->http=0x561435a89d30
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x5614359f2d50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 27] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Default 399
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 27] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 27] 2.0 CUPS-Get-Default 510
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 27] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 27] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a10f20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] con->http=0x561435a89d30
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a1bc20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 27] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 Get-Notifications 400
D [12/Jul/2019:09:49:42 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:42 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 589
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=589, response=0x561435a785d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=589
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Printers 401
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 1233
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 30] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 30] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 30] 2.0 Get-Printer-Attributes 511
D [12/Jul/2019:09:49:42 +0200] Get-Printer-Attributes ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 30] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 30] Content-Length: 101
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a1bc20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 30] con->http=0x561435a8cf40
D [12/Jul/2019:09:49:42 +0200] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x5614359f2d50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 30] bytes=0, http_state=0, data_remaining=101
D [12/Jul/2019:09:49:42 +0200] [Client 30] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 30] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 32] 2.0 Get-Jobs 512
D [12/Jul/2019:09:49:42 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 32] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 32] Content-Length: 411
D [12/Jul/2019:09:49:42 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:42 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x561435a10f20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 32] bytes=0, http_state=0, data_remaining=411
D [12/Jul/2019:09:49:42 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Default 402
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x5614359f2d50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Job 59] Start rendering...
D [12/Jul/2019:09:49:42 +0200] [Job 59] Processing page 1...
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] PrinterStateChanged
D [12/Jul/2019:09:49:42 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 26] 2.0 CUPS-Get-Printers 513
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:42 +0200] [Client 26] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 26] Content-Length: 1233
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a11870(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:42 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:42 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 26] 2.0 CUPS-Get-Default 514
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 26] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 26] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a85a40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Default 403
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a11870(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 Get-Notifications 404
D [12/Jul/2019:09:49:42 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:42 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 589
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=589, response=0x561435a85a40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=589
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Printers 405
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 1233
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a11870(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 26] 2.0 CUPS-Get-Default 515
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 26] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 26] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 6] 2.0 CUPS-Get-Default 406
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:42 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:42 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:42 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a85a40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 26] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:42 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a909f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:42 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 31] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 31] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 31] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 31] 2.0 Get-Printer-Attributes 516
D [12/Jul/2019:09:49:42 +0200] Get-Printer-Attributes ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 31] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 31] Content-Length: 101
D [12/Jul/2019:09:49:42 +0200] [Client 31] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] POST / HTTP/1.1
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] Read: status=200, state=6
D [12/Jul/2019:09:49:42 +0200] [Client 27] No authentication data provided.
D [12/Jul/2019:09:49:42 +0200] [Client 27] 2.0 Get-Jobs 517
D [12/Jul/2019:09:49:42 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:42 +0200] [Client 27] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:42 +0200] [Client 27] Content-Length: 411
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:42 +0200] [Client 31] con->http=0x561435a957b0
D [12/Jul/2019:09:49:42 +0200] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x561435a85a40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 31] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 31] bytes=0, http_state=0, data_remaining=101
D [12/Jul/2019:09:49:42 +0200] [Client 31] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 31] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 31] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:42 +0200] [Client 27] con->http=0x561435a89d30
D [12/Jul/2019:09:49:42 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x561435a90e10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:42 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:42 +0200] [Client 27] bytes=0, http_state=0, data_remaining=411
D [12/Jul/2019:09:49:42 +0200] [Client 27] Flushing write buffer.
D [12/Jul/2019:09:49:42 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:42 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:42 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
E [12/Jul/2019:09:49:43 +0200] [Job 59] Unable to open raster stream - : Broken pipe
D [12/Jul/2019:09:49:43 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
I [12/Jul/2019:09:49:43 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:43 +0200] [Job 59] Error: /ioerror in --showpage--
D [12/Jul/2019:09:49:43 +0200] [Job 59] Operand stack:
D [12/Jul/2019:09:49:43 +0200] [Job 59] true   (/tmp/gs_ni2pXw)   --nostringval--   1   true
D [12/Jul/2019:09:49:43 +0200] [Job 59] Execution stack:
D [12/Jul/2019:09:49:43 +0200] [Job 59] %interp_exit   .runexec2   --nostringval--   showpage   --nostringval--   2   %stopped_push   --nostringval--   showpage   showpage   false   1   %stopped_push   2045   2   3   %oparray_pop   2044   2   3   %oparray_pop   2025   2   3   %oparray_pop   showpage   2026   4   3   %oparray_pop   showpage   showpage   2   1   1   showpage   %for_pos_int_continue   2029   4   7   %oparray_pop   showpage   showpage   1890   3   9   %oparray_pop   showpage   showpage
D [12/Jul/2019:09:49:43 +0200] [Job 59] Dictionary stack:
D [12/Jul/2019:09:49:43 +0200] [Job 59] --dict:968/1684(ro)(G)--   --dict:1/20(G)--   --dict:82/200(L)--   --dict:82/200(L)--   --dict:133/256(ro)(G)--   --dict:311/450(ro)(G)--   --dict:32/32(L)--   --dict:6/9(L)--   --dict:7/20(L)--
D [12/Jul/2019:09:49:43 +0200] [Job 59] Current allocation mode is local
D [12/Jul/2019:09:49:43 +0200] [Job 59] Last OS error: Broken pipe
D [12/Jul/2019:09:49:43 +0200] [Job 59] GPL Ghostscript 9.26: Unrecoverable error, exit code 1
D [12/Jul/2019:09:49:43 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:43 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:43 +0200] [Notifier] PrinterStateChanged
D [12/Jul/2019:09:49:43 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:43 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:43 +0200] [Client 30] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 30] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 30] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 30] 2.0 CUPS-Get-Printers 518
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:43 +0200] [Client 30] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 30] Content-Length: 1233
D [12/Jul/2019:09:49:43 +0200] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 30] con->http=0x561435a8cf40
D [12/Jul/2019:09:49:43 +0200] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a916f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 30] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:43 +0200] [Client 30] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 30] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 30] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 30] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 30] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 30] 2.0 CUPS-Get-Default 519
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:43 +0200] [Client 30] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 30] Content-Length: 124
D [12/Jul/2019:09:49:43 +0200] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 30] con->http=0x561435a8cf40
D [12/Jul/2019:09:49:43 +0200] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a915b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 30] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:43 +0200] [Client 30] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 30] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 CUPS-Get-Default 407
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a916f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 Get-Notifications 408
D [12/Jul/2019:09:49:43 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:43 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 589
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=589, response=0x561435a915b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=589
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 CUPS-Get-Printers 409
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 1233
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a916f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 CUPS-Get-Default 410
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a915b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 30] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 30] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 30] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 30] 2.0 CUPS-Get-Default 520
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:43 +0200] [Client 30] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 30] Content-Length: 124
D [12/Jul/2019:09:49:43 +0200] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 30] con->http=0x561435a8cf40
D [12/Jul/2019:09:49:43 +0200] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a916f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 30] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:43 +0200] [Client 30] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 30] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Job 59] Rendering completed
D [12/Jul/2019:09:49:43 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:43 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:43 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:43 +0200] [Notifier] PrinterStateChanged
D [12/Jul/2019:09:49:43 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:43 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 32] 2.0 Get-Printer-Attributes 521
D [12/Jul/2019:09:49:43 +0200] Get-Printer-Attributes ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:43 +0200] [Client 32] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 32] Content-Length: 101
D [12/Jul/2019:09:49:43 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 26] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 26] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 26] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 26] 2.0 Get-Jobs 522
D [12/Jul/2019:09:49:43 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:43 +0200] [Client 26] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 26] Content-Length: 411
D [12/Jul/2019:09:49:43 +0200] [Client 26] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:43 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x561435a93f40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 32] bytes=0, http_state=0, data_remaining=101
D [12/Jul/2019:09:49:43 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 26] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:43 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x561435a94320(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 26] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 26] bytes=0, http_state=0, data_remaining=411
D [12/Jul/2019:09:49:43 +0200] [Client 26] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 26] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 31] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 31] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 31] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 31] 2.0 CUPS-Get-Printers 523
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:43 +0200] [Client 31] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 31] Content-Length: 1233
D [12/Jul/2019:09:49:43 +0200] [Client 31] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Job 59] PID 16107 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [12/Jul/2019:09:49:43 +0200] [Client 31] con->http=0x561435a957b0
D [12/Jul/2019:09:49:43 +0200] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a94010(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 31] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 31] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:43 +0200] [Client 31] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 31] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 31] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Job 59] Waiting for read thread to exit...
D [12/Jul/2019:09:49:43 +0200] [Client 31] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 31] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 31] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 31] 2.0 CUPS-Get-Default 524
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:43 +0200] [Client 31] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 31] Content-Length: 124
D [12/Jul/2019:09:49:43 +0200] [Client 31] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 31] con->http=0x561435a957b0
D [12/Jul/2019:09:49:43 +0200] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a94320(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 31] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 31] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:43 +0200] [Client 31] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 31] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 31] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 CUPS-Get-Default 411
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a94010(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 Get-Notifications 412
D [12/Jul/2019:09:49:43 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:43 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 589
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=589, response=0x561435a94320(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=589
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 CUPS-Get-Printers 413
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 1233
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a94010(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 CUPS-Get-Default 414
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a94320(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 31] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 31] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 31] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 31] 2.0 CUPS-Get-Default 525
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:43 +0200] [Client 31] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 31] Content-Length: 124
D [12/Jul/2019:09:49:43 +0200] [Client 31] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 31] con->http=0x561435a957b0
D [12/Jul/2019:09:49:43 +0200] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a94010(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 31] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 31] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:43 +0200] [Client 31] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 31] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 31] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 27] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 27] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 27] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 27] 2.0 Get-Printer-Attributes 526
D [12/Jul/2019:09:49:43 +0200] Get-Printer-Attributes ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:43 +0200] [Client 27] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 27] Content-Length: 101
D [12/Jul/2019:09:49:43 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 27] con->http=0x561435a89d30
D [12/Jul/2019:09:49:43 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x561435a94320(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 27] bytes=0, http_state=0, data_remaining=101
D [12/Jul/2019:09:49:43 +0200] [Client 27] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 27] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 30] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 30] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 30] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 30] 2.0 Get-Jobs 527
D [12/Jul/2019:09:49:43 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:43 +0200] [Client 30] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 30] Content-Length: 411
D [12/Jul/2019:09:49:43 +0200] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 30] con->http=0x561435a8cf40
D [12/Jul/2019:09:49:43 +0200] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x561435a94010(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 30] bytes=0, http_state=0, data_remaining=411
D [12/Jul/2019:09:49:43 +0200] [Client 30] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 30] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 30] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 CUPS-Get-Default 415
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:43 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 124
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a94320(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:43 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:43 +0200] [Client 6] 2.0 Get-Notifications 416
D [12/Jul/2019:09:49:43 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:43 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:43 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:43 +0200] [Client 6] Content-Length: 127
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:43 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x561435a94010(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:43 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:43 +0200] [Client 6] bytes=0, http_state=0, data_remaining=127
D [12/Jul/2019:09:49:43 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:43 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:43 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 26] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:43 +0200] [Client 26] Closing connection.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 31] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:43 +0200] [Client 31] Closing connection.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 27] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:43 +0200] [Client 27] Closing connection.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:43 +0200] [Client 30] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:43 +0200] [Client 30] Closing connection.
D [12/Jul/2019:09:49:43 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
I [12/Jul/2019:09:49:44 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 33] Server address is "127.0.0.1".
D [12/Jul/2019:09:49:44 +0200] [Client 33] Accepted from localhost:41062 (IPv4)
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for request.
D [12/Jul/2019:09:49:44 +0200] [Client 33] GET /printers/MITSUBISHI_CP60D70D707D HTTP/1.1
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 33] Read: status=200, state=3
D [12/Jul/2019:09:49:44 +0200] [Client 33] Authorized as "nouvellecuisine" using Basic.
D [12/Jul/2019:09:49:44 +0200] [Client 33] Processing GET /printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:44 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@nouvellecuisine-chiz"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/2.2.7"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[13] = "USER=root"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[18] = "AUTH_TYPE=Basic"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[19] = "LANG=fr.UTF8"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[22] = "SERVER_NAME=localhost"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[23] = "SERVER_PORT=631"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[24] = "REMOTE_ADDR=127.0.0.1"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[26] = "SCRIPT_NAME=/printers/MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/printers/MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[28] = "PATH_INFO=/MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[29] = "REMOTE_USER=nouvellecuisine"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[30] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[31] = "HTTP_COOKIE=org.cups.sid=46570f192e3cf77d48e1e573b1df888e"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[32] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:67.0) Gecko/20100101 Firefox/67.0"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[33] = "REQUEST_METHOD=GET"
D [12/Jul/2019:09:49:44 +0200] [CGI] envp[34] = "QUERY_STRING="
D [12/Jul/2019:09:49:44 +0200] cupsdAddCert: Adding certificate for PID 16118
D [12/Jul/2019:09:49:44 +0200] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 16118)
I [12/Jul/2019:09:49:44 +0200] [Client 33] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=16118, file=19)
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for CGI data.
D [12/Jul/2019:09:49:44 +0200] [CGI] org.cups.sid cookie is \"46570f192e3cf77d48e1e573b1df888e\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: PRINTER_NAME=\"MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 34] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:44 +0200] [Client 34] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:44 +0200] [Client 34] Waiting for request.
D [12/Jul/2019:09:49:44 +0200] [Client 34] POST / HTTP/1.1
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 34] Read: status=200, state=6
D [12/Jul/2019:09:49:44 +0200] [Client 34] No authentication data provided.
D [12/Jul/2019:09:49:44 +0200] [Client 34] 2.0 CUPS-Get-Default 1
D [12/Jul/2019:09:49:44 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:44 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:44 +0200] [Client 34] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:44 +0200] [Client 34] Content-Length: 121
D [12/Jul/2019:09:49:44 +0200] [Client 34] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:44 +0200] [Client 34] con->http=0x561435a957b0
D [12/Jul/2019:09:49:44 +0200] [Client 34] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=121, response=0x561435a78840(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:44 +0200] [Client 34] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:44 +0200] [Client 34] bytes=0, http_state=0, data_remaining=121
D [12/Jul/2019:09:49:44 +0200] [Client 34] Flushing write buffer.
D [12/Jul/2019:09:49:44 +0200] [Client 34] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:44 +0200] [Client 34] Waiting for request.
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 34] POST / HTTP/1.1
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 34] Read: status=200, state=6
D [12/Jul/2019:09:49:44 +0200] [Client 34] No authentication data provided.
D [12/Jul/2019:09:49:44 +0200] [Client 34] 2.0 Get-Printer-Attributes 2
D [12/Jul/2019:09:49:44 +0200] Get-Printer-Attributes ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:44 +0200] [Client 34] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:44 +0200] [Client 34] Content-Length: 655
D [12/Jul/2019:09:49:44 +0200] [Client 34] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:44 +0200] [CGI] show_printer(http=0x55fa014e78e0, printer=\"MITSUBISHI_CP60D70D707D\")
D [12/Jul/2019:09:49:44 +0200] [Client 34] con->http=0x561435a957b0
D [12/Jul/2019:09:49:44 +0200] [Client 34] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=655, response=0x561435952450(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:44 +0200] [Client 34] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:44 +0200] [Client 34] bytes=0, http_state=0, data_remaining=655
D [12/Jul/2019:09:49:44 +0200] [Client 34] Flushing write buffer.
D [12/Jul/2019:09:49:44 +0200] [Client 34] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:44 +0200] [Client 34] Waiting for request.
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: printer_is_accepting_jobs[0]=\"1\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: printer_is_shared[0]=\"0\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: printer_state[0]=\"4\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: admin_uri[0]=\"/admin/\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: printer_uri_supported[0]=\"/printers/MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: printer_name[0]=\"MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: printer_location[0]=\"\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: printer_info[0]=\"MITSUBISHI CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: job_sheets_default[0]=\"none, none\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: device_uri[0]=\"usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: color_supported[0]=\"1\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: printer_make_and_model[0]=\"MITSUBISHI CP70D Series\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: media_default[0]=\"om_me--10x-15_158.04x104.07mm\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: sides_supported[0]=\"one-sided\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: sides_default[0]=\"one-sided\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: printer_commands[0]=\"none\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: server_is_sharing_printers[0]=\"0\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: refresh_page=\"10;URL=/printers/MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: TITLE=\"MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:44 +0200] [Client 33] CGI data ready to be sent.
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=16118, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for CGI data.
D [12/Jul/2019:09:49:44 +0200] [Client 33] Script header: Content-Type: text/html;charset=utf-8
D [12/Jul/2019:09:49:44 +0200] [Client 33] Script header: 
D [12/Jul/2019:09:49:44 +0200] [Client 33] Sending status 200 for CGI.
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jul/2019:09:49:44 +0200] [CGI] Regular expression \".*Clean.*\"
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16118, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for CGI data.
D [12/Jul/2019:09:49:44 +0200] [Client 33] CGI data ready to be sent.
D [12/Jul/2019:09:49:44 +0200] [Client 34] POST / HTTP/1.1
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 34] Read: status=200, state=6
D [12/Jul/2019:09:49:44 +0200] [Client 34] No authentication data provided.
D [12/Jul/2019:09:49:44 +0200] [Client 34] 2.0 Get-Jobs 3
D [12/Jul/2019:09:49:44 +0200] Get-Jobs ipp://localhost:631/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:44 +0200] [Client 34] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:44 +0200] [Client 34] Content-Length: 346
D [12/Jul/2019:09:49:44 +0200] [Client 34] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:44 +0200] [CGI] Regular expression \".*PrintSelfTestPage.*\"
D [12/Jul/2019:09:49:44 +0200] [Client 34] con->http=0x561435a957b0
D [12/Jul/2019:09:49:44 +0200] [Client 34] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=346, response=0x561435a11a60(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:44 +0200] [Client 34] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:44 +0200] [Client 34] bytes=0, http_state=0, data_remaining=346
D [12/Jul/2019:09:49:44 +0200] [Client 34] Flushing write buffer.
D [12/Jul/2019:09:49:44 +0200] [Client 34] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:44 +0200] [Client 34] Waiting for request.
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16118, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for CGI data.
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiClearVariables called.
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: TOTAL=\"1\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: job_printer_name[0]=\"MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16118, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for CGI data.
D [12/Jul/2019:09:49:44 +0200] [Client 33] CGI data ready to be sent.
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: job_printer_uri[0]=\"/printers/MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: time_at_completed[0]=\"novalue\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: time_at_creation[0]=\"Fri Jul 12 09:49:42 2019\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: time_at_processing[0]=\"Fri Jul 12 09:49:42 2019\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: job_id[0]=\"59\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: job_state[0]=\"5\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: job_impressions_completed[0]=\"0\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: job_k_octets[0]=\"1\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetArray: job_printer_state_message[0]=\"Filter failed\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: PRINTER_NAME=\"MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: PRINTER_URI_SUPPORTED=\"/printers/MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: THISURL=\"/printers/MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [CGI] cgiSetVariable: SEARCH_DEST=\"MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16118, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for CGI data.
D [12/Jul/2019:09:49:44 +0200] [Client 34] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:44 +0200] [Client 34] Closing connection.
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16118, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for CGI data.
D [12/Jul/2019:09:49:44 +0200] [Client 33] CGI data ready to be sent.
D [12/Jul/2019:09:49:44 +0200] PID 16118 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16118, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for CGI data.
D [12/Jul/2019:09:49:44 +0200] [Client 33] Sending 0-length chunk.
D [12/Jul/2019:09:49:44 +0200] [Client 33] Flushing write buffer.
D [12/Jul/2019:09:49:44 +0200] [Client 33] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for request.
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 33] GET /cups.css HTTP/1.1
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 33] Read: status=200, state=3
D [12/Jul/2019:09:49:44 +0200] [Client 33] Authorized as "nouvellecuisine" using Basic.
D [12/Jul/2019:09:49:44 +0200] [Client 33] Processing GET /cups.css
D [12/Jul/2019:09:49:44 +0200] [Client 33] filename="/usr/share/cups/doc-root/cups.css", type=text/css
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdSendHeader: code=200, type="text/css", auth_type=0
D [12/Jul/2019:09:49:44 +0200] [Client 33] Sending file.
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:44 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=9961, response=(nil)(), pipe_pid=0, file=19
D [12/Jul/2019:09:49:44 +0200] [Client 33] Flushing write buffer.
D [12/Jul/2019:09:49:44 +0200] [Client 33] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:44 +0200] [Client 33] Waiting for request.
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 33] GET /apple-touch-icon.png HTTP/1.1
D [12/Jul/2019:09:49:44 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:44 +0200] [Client 33] Read: status=200, state=3
D [12/Jul/2019:09:49:45 +0200] [Client 33] Authorized as "nouvellecuisine" using Basic.
D [12/Jul/2019:09:49:45 +0200] [Client 33] Processing GET /apple-touch-icon.png
D [12/Jul/2019:09:49:45 +0200] [Client 33] filename="/usr/share/cups/doc-root/apple-touch-icon.png", type=image/png
D [12/Jul/2019:09:49:45 +0200] [Client 33] cupsdSendHeader: code=200, type="image/png", auth_type=0
D [12/Jul/2019:09:49:45 +0200] [Client 33] Sending file.
I [12/Jul/2019:09:49:45 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:45 +0200] [Client 33] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:45 +0200] [Client 33] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2551, response=(nil)(), pipe_pid=0, file=19
D [12/Jul/2019:09:49:45 +0200] [Client 33] Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:45 +0200] [Client 33] Closing connection.
D [12/Jul/2019:09:49:45 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
I [12/Jul/2019:09:49:46 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:50 +0200] [Job 59] Read thread still active, aborting the pending read...
I [12/Jul/2019:09:49:50 +0200] Expiring subscriptions...
I [12/Jul/2019:09:49:51 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:51 +0200] Report: clients=4
D [12/Jul/2019:09:49:51 +0200] Report: jobs=3
D [12/Jul/2019:09:49:51 +0200] Report: jobs-active=1
D [12/Jul/2019:09:49:51 +0200] Report: printers=1
D [12/Jul/2019:09:49:51 +0200] Report: stringpool-string-count=2990
D [12/Jul/2019:09:49:51 +0200] Report: stringpool-alloc-bytes=12888
D [12/Jul/2019:09:49:51 +0200] Report: stringpool-total-bytes=59800
D [12/Jul/2019:09:49:51 +0200] [Job 59] PID 16109 (/usr/lib/cups/backend/usb) exited with no errors.
D [12/Jul/2019:09:49:51 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
E [12/Jul/2019:09:49:51 +0200] [Job 59] Job stopped due to filter errors; please consult the error_log file for details.
D [12/Jul/2019:09:49:51 +0200] cupsdMarkDirty(---J-)
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:51 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:51 +0200] [Job 59] The following messages were recorded from 09:49:42 to 09:49:42
D [12/Jul/2019:09:49:51 +0200] [Job 59] Printer found with device ID: MFG:MITSUBISHI;CMD:MEL;MDL:CP60D70D707D;CLS:PRINTER;DES:MITSUBISHI CP60D70D707D Device URI: usb://MITSUBISHI/CP60D70D707D?serial=CPD70D133060
D [12/Jul/2019:09:49:51 +0200] [Job 59] End of messages
D [12/Jul/2019:09:49:51 +0200] [Job 59] printer-state=3(idle)
D [12/Jul/2019:09:49:51 +0200] [Job 59] printer-state-message="Rendering completed"
D [12/Jul/2019:09:49:51 +0200] [Job 59] printer-state-reasons=none
D [12/Jul/2019:09:49:51 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:51 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:51 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:51 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:51 +0200] [Notifier] PrinterStateChanged
D [12/Jul/2019:09:49:51 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:51 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=100, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=100, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=100, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=100, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=100, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:51 +0200] [Client 32] 2.0 CUPS-Get-Printers 528
D [12/Jul/2019:09:49:51 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:51 +0200] [Client 32] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:51 +0200] [Client 32] Content-Length: 1233
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=100, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1233, response=0x561435a85ea0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:51 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:51 +0200] [Client 32] bytes=0, http_state=0, data_remaining=1233
D [12/Jul/2019:09:49:51 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:51 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:51 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=100, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=100, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 6] Read: status=100, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 6] 2.0 Get-Notifications 417
D [12/Jul/2019:09:49:51 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:51 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:51 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:51 +0200] [Client 6] Content-Length: 1216
D [12/Jul/2019:09:49:51 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:51 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:51 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1216, response=0x561435a85ea0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:51 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:51 +0200] [Client 6] bytes=0, http_state=0, data_remaining=1216
D [12/Jul/2019:09:49:51 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:51 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:51 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:51 +0200] [Client 32] 2.0 CUPS-Get-Default 529
D [12/Jul/2019:09:49:51 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:51 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:51 +0200] [Client 32] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:51 +0200] [Client 32] Content-Length: 124
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:51 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x5614359f38c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:51 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:51 +0200] [Client 32] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:51 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:51 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:51 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 35] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:51 +0200] [Client 35] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:51 +0200] [Client 35] Waiting for request.
D [12/Jul/2019:09:49:51 +0200] [Client 35] POST / HTTP/1.1
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 35] Read: status=200, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 35] No authentication data provided.
D [12/Jul/2019:09:49:51 +0200] [Client 35] 2.0 Get-Job-Attributes 418
D [12/Jul/2019:09:49:51 +0200] Get-Job-Attributes ipp://localhost/jobs/59
D [12/Jul/2019:09:49:51 +0200] [Client 35] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/59) from localhost
D [12/Jul/2019:09:49:51 +0200] [Client 35] Content-Length: 121
D [12/Jul/2019:09:49:51 +0200] [Client 35] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:51 +0200] [Client 35] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:51 +0200] [Client 35] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=121, response=0x561435a12000(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:51 +0200] [Client 35] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:51 +0200] [Client 35] bytes=0, http_state=0, data_remaining=121
D [12/Jul/2019:09:49:51 +0200] [Client 35] Flushing write buffer.
D [12/Jul/2019:09:49:51 +0200] [Client 35] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:51 +0200] [Client 35] Waiting for request.
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 35] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:51 +0200] [Client 35] Closing connection.
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:51 +0200] [Client 32] 2.0 CUPS-Get-Default 530
D [12/Jul/2019:09:49:51 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:51 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:51 +0200] [Client 32] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:51 +0200] [Client 32] Content-Length: 124
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:51 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x561435a12050(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:51 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:51 +0200] [Client 32] bytes=0, http_state=0, data_remaining=124
D [12/Jul/2019:09:49:51 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:51 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:51 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:51 +0200] [Client 32] 2.0 Get-Printer-Attributes 531
D [12/Jul/2019:09:49:51 +0200] Get-Printer-Attributes ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:51 +0200] [Client 32] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:51 +0200] [Client 32] Content-Length: 101
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:51 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x561435a12000(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:51 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:51 +0200] [Client 32] bytes=0, http_state=0, data_remaining=101
D [12/Jul/2019:09:49:51 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:51 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:51 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:51 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:51 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:51 +0200] [Client 32] 2.0 Get-Jobs 532
D [12/Jul/2019:09:49:51 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:51 +0200] [Client 32] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:51 +0200] [Client 32] Content-Length: 411
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:51 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:51 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=411, response=0x561435a12050(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:51 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:51 +0200] [Client 32] bytes=0, http_state=0, data_remaining=411
D [12/Jul/2019:09:49:51 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:51 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:51 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:51 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [12/Jul/2019:09:49:52 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:52 +0200] [Job 59] Unloading...
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 36] Server address is "127.0.0.1".
D [12/Jul/2019:09:49:53 +0200] [Client 36] Accepted from localhost:41064 (IPv4)
D [12/Jul/2019:09:49:53 +0200] [Client 36] Waiting for request.
I [12/Jul/2019:09:49:53 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:53 +0200] [Client 36] POST /jobs/ HTTP/1.1
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 36] Read: status=200, state=6
D [12/Jul/2019:09:49:53 +0200] [Client 36] Authorized as "nouvellecuisine" using Basic.
D [12/Jul/2019:09:49:53 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/jobs.cgi"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@nouvellecuisine-chiz"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/2.2.7"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[13] = "USER=root"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[18] = "AUTH_TYPE=Basic"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[19] = "LANG=fr.UTF8"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[22] = "SERVER_NAME=localhost"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[23] = "SERVER_PORT=631"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[24] = "REMOTE_ADDR=127.0.0.1"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[26] = "SCRIPT_NAME=/jobs/"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/jobs/"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[28] = "REMOTE_USER=nouvellecuisine"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[30] = "HTTP_COOKIE=org.cups.sid=46570f192e3cf77d48e1e573b1df888e"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[31] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:67.0) Gecko/20100101 Firefox/67.0"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[32] = "HTTP_REFERER=http://localhost:631/printers/MITSUBISHI_CP60D70D707D"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[33] = "REQUEST_METHOD=POST"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[34] = "CONTENT_LENGTH=123"
D [12/Jul/2019:09:49:53 +0200] [CGI] envp[35] = "CONTENT_TYPE=application/x-www-form-urlencoded"
D [12/Jul/2019:09:49:53 +0200] cupsdAddCert: Adding certificate for PID 16122
D [12/Jul/2019:09:49:53 +0200] [CGI] Started /usr/lib/cups/cgi-bin/jobs.cgi (PID 16122)
I [12/Jul/2019:09:49:53 +0200] [Client 36] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=16122, file=23)
D [12/Jul/2019:09:49:53 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:53 +0200] [CGI] org.cups.sid cookie is \"46570f192e3cf77d48e1e573b1df888e\"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: org.cups.sid=\"46570f192e3cf77d48e1e573b1df888e\"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: OP=\"cancel-job\"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: job_id=\"59\"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: job_printer_uri=\"/printers/MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: SECTION=\"jobs\"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 37] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:53 +0200] [Client 37] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:53 +0200] [Client 37] Waiting for request.
D [12/Jul/2019:09:49:53 +0200] [Client 37] POST /jobs HTTP/1.1
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 37] Read: status=200, state=6
D [12/Jul/2019:09:49:53 +0200] [Client 37] No authentication data provided.
D [12/Jul/2019:09:49:53 +0200] [Client 37] 2.0 Cancel-Job 1
D [12/Jul/2019:09:49:53 +0200] Cancel-Job ipp://localhost/jobs/59
D [12/Jul/2019:09:49:53 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:53 +0200] [Job 59] Loading attributes...
D [12/Jul/2019:09:49:53 +0200] [Job 59] time-at-completed=1562917793
D [12/Jul/2019:09:49:53 +0200] cupsdMarkDirty(----S)
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [12/Jul/2019:09:49:53 +0200] [Job 59] Job canceled by \"nouvellecuisine\"
I [12/Jul/2019:09:49:53 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:53 +0200] cupsdMarkDirty(---J-)
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [12/Jul/2019:09:49:53 +0200] [Job 59] Canceled by "nouvellecuisine".
D [12/Jul/2019:09:49:53 +0200] [Client 37] Returning IPP successful-ok for Cancel-Job (ipp://localhost/jobs/59) from localhost
D [12/Jul/2019:09:49:53 +0200] [Client 37] Content-Length: 72
D [12/Jul/2019:09:49:53 +0200] [Client 37] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:53 +0200] [Client 37] con->http=0x561435a8c930
D [12/Jul/2019:09:49:53 +0200] [Client 37] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=72, response=0x561435a00940(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:53 +0200] [Client 37] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:53 +0200] [Client 37] bytes=0, http_state=0, data_remaining=72
D [12/Jul/2019:09:49:53 +0200] [Client 37] Flushing write buffer.
D [12/Jul/2019:09:49:53 +0200] [Client 37] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:53 +0200] [Client 37] Waiting for request.
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:53 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:53 +0200] [Notifier] JobCompleted
D [12/Jul/2019:09:49:53 +0200] [Notifier] state=3
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: refresh_page=\"5;URL=http://localhost:631/printers/MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:53 +0200] [Client 6] POST / HTTP/1.1
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 6] Read: status=200, state=6
D [12/Jul/2019:09:49:53 +0200] [Client 6] No authentication data provided.
D [12/Jul/2019:09:49:53 +0200] [Client 6] 2.0 Get-Notifications 419
D [12/Jul/2019:09:49:53 +0200] Get-Notifications /printers/
D [12/Jul/2019:09:49:53 +0200] cupsdIsAuthorized: requesting-user-name="nouvellecuisine"
D [12/Jul/2019:09:49:53 +0200] [Client 6] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost
D [12/Jul/2019:09:49:53 +0200] [Client 6] Content-Length: 704
D [12/Jul/2019:09:49:53 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:53 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:53 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:53 +0200] [Client 32] 2.0 Get-Job-Attributes 533
D [12/Jul/2019:09:49:53 +0200] Get-Job-Attributes ipp://localhost/jobs/59
D [12/Jul/2019:09:49:53 +0200] [Client 32] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/59) from localhost
D [12/Jul/2019:09:49:53 +0200] [Client 32] Content-Length: 189
D [12/Jul/2019:09:49:53 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:53 +0200] [Client 6] con->http=0x561435a12cb0
D [12/Jul/2019:09:49:53 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=704, response=0x56143594f4a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:53 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:53 +0200] [Client 6] bytes=0, http_state=0, data_remaining=704
D [12/Jul/2019:09:49:53 +0200] [Client 6] Flushing write buffer.
D [12/Jul/2019:09:49:53 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:53 +0200] [Client 6] Waiting for request.
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:53 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=189, response=0x561435a93f10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:53 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:53 +0200] [Client 32] bytes=0, http_state=0, data_remaining=189
D [12/Jul/2019:09:49:53 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:53 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:53 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 38] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:53 +0200] [Client 38] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:53 +0200] [Client 38] Waiting for request.
D [12/Jul/2019:09:49:53 +0200] [Client 32] POST / HTTP/1.1
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 32] Read: status=200, state=6
D [12/Jul/2019:09:49:53 +0200] [Client 32] No authentication data provided.
D [12/Jul/2019:09:49:53 +0200] [Client 32] 2.0 Get-Jobs 534
D [12/Jul/2019:09:49:53 +0200] Get-Jobs ipp://localhost/printers/MITSUBISHI_CP60D70D707D
D [12/Jul/2019:09:49:53 +0200] [Client 32] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MITSUBISHI_CP60D70D707D) from localhost
D [12/Jul/2019:09:49:53 +0200] [Client 32] Content-Length: 75
D [12/Jul/2019:09:49:53 +0200] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:53 +0200] [Client 38] POST / HTTP/1.1
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 38] Read: status=200, state=6
D [12/Jul/2019:09:49:53 +0200] [Client 38] No authentication data provided.
D [12/Jul/2019:09:49:53 +0200] [Client 38] 2.0 Get-Job-Attributes 420
D [12/Jul/2019:09:49:53 +0200] Get-Job-Attributes ipp://localhost/jobs/59
D [12/Jul/2019:09:49:53 +0200] [Client 38] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/59) from localhost
D [12/Jul/2019:09:49:53 +0200] [Client 38] Content-Length: 121
D [12/Jul/2019:09:49:53 +0200] [Client 38] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:53 +0200] [Client 32] con->http=0x561435a0c890
D [12/Jul/2019:09:49:53 +0200] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x561435a00940(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:53 +0200] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:53 +0200] [Client 32] bytes=0, http_state=0, data_remaining=75
D [12/Jul/2019:09:49:53 +0200] [Client 32] Flushing write buffer.
D [12/Jul/2019:09:49:53 +0200] [Client 32] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:53 +0200] [Client 32] Waiting for request.
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 38] con->http=0x561435a94c80
D [12/Jul/2019:09:49:53 +0200] [Client 38] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=121, response=0x561435a8c740(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:53 +0200] [Client 38] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:53 +0200] [Client 38] bytes=0, http_state=0, data_remaining=121
D [12/Jul/2019:09:49:53 +0200] [Client 38] Flushing write buffer.
D [12/Jul/2019:09:49:53 +0200] [Client 38] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:53 +0200] [Client 38] Waiting for request.
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 38] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:53 +0200] [Client 38] Closing connection.
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: TITLE=\"Tâches\"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:53 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:53 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:53 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:53 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=16122, file=23
D [12/Jul/2019:09:49:53 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:53 +0200] [Client 36] Script header: Content-Type: text/html;charset=utf-8
D [12/Jul/2019:09:49:53 +0200] [Client 36] Script header: 
D [12/Jul/2019:09:49:53 +0200] [Client 36] Sending status 200 for CGI.
D [12/Jul/2019:09:49:53 +0200] [Client 36] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jul/2019:09:49:53 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:53 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16122, file=23
D [12/Jul/2019:09:49:53 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:53 +0200] [Client 37] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:53 +0200] [Client 37] Closing connection.
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:53 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:53 +0200] PID 16122 (/usr/lib/cups/cgi-bin/jobs.cgi) exited with no errors.
D [12/Jul/2019:09:49:53 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:53 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16122, file=23
D [12/Jul/2019:09:49:53 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:53 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:53 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16122, file=23
D [12/Jul/2019:09:49:53 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:53 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:53 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:53 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16122, file=23
D [12/Jul/2019:09:49:53 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:53 +0200] [Client 36] Sending 0-length chunk.
D [12/Jul/2019:09:49:53 +0200] [Client 36] Flushing write buffer.
D [12/Jul/2019:09:49:53 +0200] [Client 36] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:53 +0200] [Client 36] Waiting for request.
D [12/Jul/2019:09:49:53 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [12/Jul/2019:09:49:54 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:56 +0200] [Client 36] GET /jobs/ HTTP/1.1
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 36] Read: status=200, state=3
D [12/Jul/2019:09:49:56 +0200] [Client 36] Authorized as "nouvellecuisine" using Basic.
D [12/Jul/2019:09:49:56 +0200] [Client 36] Processing GET /jobs/
D [12/Jul/2019:09:49:56 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/jobs.cgi"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@nouvellecuisine-chiz"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/2.2.7"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[13] = "USER=root"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[18] = "AUTH_TYPE=Basic"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[19] = "LANG=fr.UTF8"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[22] = "SERVER_NAME=localhost"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[23] = "SERVER_PORT=631"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[24] = "REMOTE_ADDR=127.0.0.1"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[26] = "SCRIPT_NAME=/jobs/"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/jobs/"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[28] = "REMOTE_USER=nouvellecuisine"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[30] = "HTTP_COOKIE=org.cups.sid=46570f192e3cf77d48e1e573b1df888e"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[31] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:67.0) Gecko/20100101 Firefox/67.0"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[32] = "HTTP_REFERER=http://localhost:631/jobs/"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[33] = "REQUEST_METHOD=GET"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[34] = "QUERY_STRING="
D [12/Jul/2019:09:49:56 +0200] cupsdAddCert: Adding certificate for PID 16123
D [12/Jul/2019:09:49:56 +0200] [CGI] Started /usr/lib/cups/cgi-bin/jobs.cgi (PID 16123)
I [12/Jul/2019:09:49:56 +0200] [Client 36] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=16123, file=19)
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
I [12/Jul/2019:09:49:56 +0200] Expiring subscriptions...
D [12/Jul/2019:09:49:56 +0200] [CGI] org.cups.sid cookie is \"46570f192e3cf77d48e1e573b1df888e\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: SECTION=\"jobs\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 39] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:56 +0200] [Client 39] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:56 +0200] [Client 39] Waiting for request.
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: TITLE=\"Tâches\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:56 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=16123, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] Script header: Content-Type: text/html;charset=utf-8
D [12/Jul/2019:09:49:56 +0200] [Client 36] Script header: 
D [12/Jul/2019:09:49:56 +0200] [Client 36] Sending status 200 for CGI.
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16123, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 39] POST / HTTP/1.1
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 39] Read: status=200, state=6
D [12/Jul/2019:09:49:56 +0200] [Client 39] No authentication data provided.
D [12/Jul/2019:09:49:56 +0200] [Client 39] 2.0 Get-Jobs 1
D [12/Jul/2019:09:49:56 +0200] Get-Jobs ipp://localhost/
D [12/Jul/2019:09:49:56 +0200] [Client 39] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost
D [12/Jul/2019:09:49:56 +0200] [Client 39] Content-Length: 72
D [12/Jul/2019:09:49:56 +0200] [Client 39] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:56 +0200] [Client 39] con->http=0x561435a94c80
D [12/Jul/2019:09:49:56 +0200] [Client 39] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=72, response=0x561435a846e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:56 +0200] [Client 39] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:56 +0200] [Client 39] bytes=0, http_state=0, data_remaining=72
D [12/Jul/2019:09:49:56 +0200] [Client 39] Flushing write buffer.
D [12/Jul/2019:09:49:56 +0200] [Client 39] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:56 +0200] [Client 39] Waiting for request.
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiClearVariables called.
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: SECTION=\"jobs\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: TOTAL=\"0\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: THISURL=\"/jobs/\"
D [12/Jul/2019:09:49:56 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16123, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16123, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:56 +0200] [Client 39] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:56 +0200] [Client 39] Closing connection.
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16123, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] PID 16123 (/usr/lib/cups/cgi-bin/jobs.cgi) exited with no errors.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16123, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16123, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] Sending 0-length chunk.
D [12/Jul/2019:09:49:56 +0200] [Client 36] Flushing write buffer.
D [12/Jul/2019:09:49:56 +0200] [Client 36] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for request.
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 36] GET /printers/ HTTP/1.1
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 36] Read: status=200, state=3
D [12/Jul/2019:09:49:56 +0200] [Client 36] Authorized as "nouvellecuisine" using Basic.
D [12/Jul/2019:09:49:56 +0200] [Client 36] Processing GET /printers/
D [12/Jul/2019:09:49:56 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@nouvellecuisine-chiz"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/2.2.7"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[13] = "USER=root"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[17] = "IPP_PORT=631"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[18] = "AUTH_TYPE=Basic"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[19] = "LANG=fr.UTF8"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[22] = "SERVER_NAME=localhost"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[23] = "SERVER_PORT=631"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[24] = "REMOTE_ADDR=127.0.0.1"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[26] = "SCRIPT_NAME=/printers/"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/printers/"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[28] = "REMOTE_USER=nouvellecuisine"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[30] = "HTTP_COOKIE=org.cups.sid=46570f192e3cf77d48e1e573b1df888e"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[31] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:67.0) Gecko/20100101 Firefox/67.0"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[32] = "HTTP_REFERER=http://localhost:631/jobs/"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[33] = "REQUEST_METHOD=GET"
D [12/Jul/2019:09:49:56 +0200] [CGI] envp[34] = "QUERY_STRING="
D [12/Jul/2019:09:49:56 +0200] cupsdAddCert: Adding certificate for PID 16124
D [12/Jul/2019:09:49:56 +0200] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 16124)
I [12/Jul/2019:09:49:56 +0200] [Client 36] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=16124, file=19)
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [CGI] org.cups.sid cookie is \"46570f192e3cf77d48e1e573b1df888e\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: SECTION=\"printers\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 40] Server address is "/run/cups/cups.sock".
D [12/Jul/2019:09:49:56 +0200] [Client 40] Accepted from localhost (Domain)
D [12/Jul/2019:09:49:56 +0200] [Client 40] Waiting for request.
D [12/Jul/2019:09:49:56 +0200] [Client 40] POST / HTTP/1.1
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 40] Read: status=200, state=6
D [12/Jul/2019:09:49:56 +0200] [Client 40] No authentication data provided.
D [12/Jul/2019:09:49:56 +0200] [Client 40] 2.0 CUPS-Get-Default 1
D [12/Jul/2019:09:49:56 +0200] CUPS-Get-Default
D [12/Jul/2019:09:49:56 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [12/Jul/2019:09:49:56 +0200] [Client 40] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost
D [12/Jul/2019:09:49:56 +0200] [Client 40] Content-Length: 121
D [12/Jul/2019:09:49:56 +0200] [Client 40] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:56 +0200] [Client 40] con->http=0x561435a952f0
D [12/Jul/2019:09:49:56 +0200] [Client 40] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=121, response=0x561435a846e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:56 +0200] [Client 40] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:56 +0200] [Client 40] bytes=0, http_state=0, data_remaining=121
D [12/Jul/2019:09:49:56 +0200] [Client 40] Flushing write buffer.
D [12/Jul/2019:09:49:56 +0200] [Client 40] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:56 +0200] [Client 40] Waiting for request.
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [CGI] show_all_printers(http=0x56195020d8b0, user=\"nouvellecuisine\")
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: TITLE=\"Printers\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:56 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=16124, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] Script header: Content-Type: text/html;charset=utf-8
D [12/Jul/2019:09:49:56 +0200] [Client 36] Script header: 
D [12/Jul/2019:09:49:56 +0200] [Client 36] Sending status 200 for CGI.
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16124, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 40] POST / HTTP/1.1
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 40] Read: status=200, state=6
D [12/Jul/2019:09:49:56 +0200] [Client 40] No authentication data provided.
D [12/Jul/2019:09:49:56 +0200] [Client 40] 2.0 CUPS-Get-Printers 2
D [12/Jul/2019:09:49:56 +0200] CUPS-Get-Printers
D [12/Jul/2019:09:49:56 +0200] [Client 40] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [12/Jul/2019:09:49:56 +0200] [Client 40] Content-Length: 365
D [12/Jul/2019:09:49:56 +0200] [Client 40] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [12/Jul/2019:09:49:56 +0200] [Client 40] con->http=0x561435a952f0
D [12/Jul/2019:09:49:56 +0200] [Client 40] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=365, response=0x561435a00940(IPP_STATE_DATA), pipe_pid=0, file=-1
D [12/Jul/2019:09:49:56 +0200] [Client 40] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [12/Jul/2019:09:49:56 +0200] [Client 40] bytes=0, http_state=0, data_remaining=365
D [12/Jul/2019:09:49:56 +0200] [Client 40] Flushing write buffer.
D [12/Jul/2019:09:49:56 +0200] [Client 40] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:56 +0200] [Client 40] Waiting for request.
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: TOTAL=\"1\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: REMOTE_USER=\"nouvellecuisine\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.7\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetArray: printer_state[0]=\"3\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetArray: printer_state_message[0]=\"Rendering completed\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetArray: admin_uri[0]=\"/admin/\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetArray: printer_uri_supported[0]=\"/printers/MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetArray: printer_name[0]=\"MITSUBISHI_CP60D70D707D\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetArray: printer_location[0]=\"\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetArray: printer_info[0]=\"MITSUBISHI CP60D70D707D\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetArray: printer_make_and_model[0]=\"MITSUBISHI CP70D Series\"
D [12/Jul/2019:09:49:56 +0200] [CGI] cgiSetVariable: THISURL=\"/printers/\"
D [12/Jul/2019:09:49:56 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16124, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16124, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:56 +0200] [Client 40] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:49:56 +0200] [Client 40] Closing connection.
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16124, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16124, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] CGI data ready to be sent.
D [12/Jul/2019:09:49:56 +0200] PID 16124 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [12/Jul/2019:09:49:56 +0200] [Client 36] con->http=0x561435a7d0c0
D [12/Jul/2019:09:49:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=16124, file=19
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for CGI data.
D [12/Jul/2019:09:49:56 +0200] [Client 36] Sending 0-length chunk.
D [12/Jul/2019:09:49:56 +0200] [Client 36] Flushing write buffer.
D [12/Jul/2019:09:49:56 +0200] [Client 36] New state is HTTP_STATE_WAITING
D [12/Jul/2019:09:49:56 +0200] [Client 36] Waiting for request.
D [12/Jul/2019:09:49:56 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [12/Jul/2019:09:49:57 +0200] Expiring subscriptions...
D [12/Jul/2019:09:50:07 +0200] [Client 36] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:50:07 +0200] [Client 36] Closing connection.
D [12/Jul/2019:09:50:07 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [12/Jul/2019:09:50:07 +0200] Expiring subscriptions...
I [12/Jul/2019:09:50:08 +0200] Expiring subscriptions...
D [12/Jul/2019:09:50:08 +0200] [Client 32] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [12/Jul/2019:09:50:08 +0200] [Client 32] Closing connection.
D [12/Jul/2019:09:50:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [12/Jul/2019:09:50:09 +0200] Expiring subscriptions...
I [12/Jul/2019:09:50:13 +0200] Saving job.cache...
I [12/Jul/2019:09:50:13 +0200] Saving subscriptions.conf...
D [12/Jul/2019:09:50:13 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [12/Jul/2019:09:50:13 +0200] Expiring subscriptions..

Hors ligne

#55 Le 12/07/2019, à 11:30

ylag

Re : Installation Mitsubishi CP-D70DW

Salut,

Plus de messages d'erreurs (lignes débutant par E ...) dans le retour au #54. Par contre, toujours le satané:

D [12/Jul/2019:09:49:42 +0200] [Job 59] PID 16108 (/usr/lib/cups/filter/CP70Filter) stopped with status 102 (No such file or directory)

...que je ne sais pas interpréter, désolé.

Pourtant, juste un peu plus haut:

I [12/Jul/2019:09:49:42 +0200] [Job 59] Started filter /usr/lib/cups/filter/CP70Filter (PID 16108)

Il faudrait des intervenants plus calés que moi pour examiner ton retour du #54.

moustach a écrit :

Dois-je downgrade ma version ?

Là, je ne suis pas certain de comprendre le sens de ta question.

A+

Dernière modification par ylag (Le 12/07/2019, à 11:39)

Hors ligne

#56 Le 22/07/2019, à 09:03

moustach

Re : Installation Mitsubishi CP-D70DW

Quelqu'un d'autre à une solution ?
C'est peut être tous simplement pas un bon Filter, mais j'arrive pas à contacter leur service tech.

Hors ligne

#57 Le 30/07/2019, à 13:32

moustach

Re : Installation Mitsubishi CP-D70DW

Bon j'ai enfin corrigé mon problème grace à un bon samaritain lol.

Le problème était que le cups filter de Mitsubishi était pour un noyau Linux assez vieux et surtout que c'était pour une version 32bits.
Donc la solution était de mettre certaines app sur une version 32 bits.

Voilà les libs que j'ai ajouté  :

  • libstdc++6

  • lib32stdc++6

  • libcups2:i386

  • libcupsimage2:i386

Voilà j'espère que ca pourra aider d'autres personnes
Merci à ceux qui ont essayé de m'aider

Dernière modification par moustach (Le 30/07/2019, à 13:33)

Hors ligne

#58 Le 30/07/2019, à 14:04

Nuliel

Re : Installation Mitsubishi CP-D70DW

Bravo pour avoir trouvé la solution, comment as tu fait pour identifier les 4 libs 32 bits à ajouter?

Hors ligne

#59 Le 30/07/2019, à 14:38

moustach

Re : Installation Mitsubishi CP-D70DW

En essayant de le lancer comme une app.
Ca me disait quelle lib il manquait

Dernière modification par moustach (Le 30/07/2019, à 14:39)

Hors ligne

#60 Le 30/07/2019, à 14:38

ylag

Re : Installation Mitsubishi CP-D70DW

Salut,

Naziel a écrit :

Bravo pour avoir trouvé la solution, comment as tu fait pour identifier les 4 libs 32 bits à ajouter?

++1, et j'aimerais bien savoir moi aussi ! wink

A+

Hors ligne

#61 Le 30/07/2019, à 14:51

ylag

Re : Installation Mitsubishi CP-D70DW

@moustach:

Salut,

Encore bravo d'avoir trouvé...
Pourrais-tu poster la commande spécifique qui t'a retourné l'erreur des libs manquantes ?

A+

Hors ligne

#62 Le 30/07/2019, à 14:55

moustach

Re : Installation Mitsubishi CP-D70DW

./usr/lib/cups/filter/CP70Filter

J'ai juste lancer le binaire. Et à chaque fois ça me retourner une lib qui manquait, et à chaque fois je l'a rajouté.

Hors ligne