Ubuntu-fr

misterbean22

Démarrage de plus en plus long.

Bonjour à toutes et tous !
Je suis sous 18.4 LTS,  processeur Intel® Celeron(R) CPU N3000 @ 1.04GHz × 2 , carte graphique Intel® HD Graphics 400 (Braswell) , 64 bits, environement Gnome.
Depuis deux trois semaines, mon pc met de plus en plus de temps à arriver sur la page de connexion. Je n'ai pas fait de lien évident avec une mise à jour, mais vu qu'il y en a pas mal... Il met trois quatre minutes , quand il fait beau:P...Imaginez les jours de pluie (et je suis en Bretagne !:lol:).
Par contre, quand je fais un redémarrage (après mise à jours ou autre), il est beaucoup moins long (genre comme avant, 15 sec).
Je lu quelques posts, histoire de voir si une solution pouvait être trouvée et (étant toujours un peu quiche)j'ai essayé "systemd-analyze blame" qui me renvoit (après que le pc soit allumé depuis au moins 1/2h) : "Bootup is not yet finished. Please try again later."
Et là....je ne comprend pas. Il est toujours en boot après 1/2h...???
Y aurait-il une âme ubuntienne charitable pour m'expliquer et éventuellement me dépanner...
Merci d'avance

misterbean22

Re : Démarrage de plus en plus long.

Copie du contenu de X11/xorg.conf (.failsafe?) :
Section "Device"
    Identifier    "Configured Video Device"
    Driver        "vesa"
EndSection

Section "Monitor"
    Identifier    "Configured Monitor"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Monitor        "Configured Monitor"
    Device        "Configured Video Device"
EndSection

et /var/log/Xorg.0.log :

[    10.082] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    10.082] X Protocol Version 11, Revision 0
[    10.082] Build Operating System: Linux 4.4.0-128-generic x86_64 Ubuntu
[    10.082] Current Operating System: Linux benoitsteph-desktop 4.4.0-134-generic #160-Ubuntu SMP Wed Aug 15 14:58:00 UTC 2018 x86_64
[    10.082] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-134-generic root=UUID=c0691283-1274-4f78-ab57-fb97f54556c1 ro quiet splash vt.handoff=7
[    10.082] Build Date: 10 August 2018  09:33:05AM
[    10.082] xorg-server 2:1.18.4-0ubuntu0.8 (For technical support please see http://www.ubuntu.com/support) 
[    10.082] Current version of pixman: 0.33.6
[    10.082] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    10.082] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    10.082] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 30 10:16:57 2018
[    10.084] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    10.099] (==) No Layout section.  Using the first Screen section.
[    10.099] (==) No screen section available. Using defaults.
[    10.099] (**) |-->Screen "Default Screen Section" (0)
[    10.099] (**) |   |-->Monitor "<default monitor>"
[    10.100] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    10.100] (==) Automatically adding devices
[    10.100] (==) Automatically enabling devices
[    10.100] (==) Automatically adding GPU devices
[    10.100] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    10.100] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    10.100] 	Entry deleted from font path.
[    10.100] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    10.100] 	Entry deleted from font path.
[    10.100] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    10.100] 	Entry deleted from font path.
[    10.101] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    10.101] 	Entry deleted from font path.
[    10.101] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    10.101] 	Entry deleted from font path.
[    10.101] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    10.101] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    10.101] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    10.101] (II) Loader magic: 0x55ddf38e8dc0
[    10.101] (II) Module ABI versions:
[    10.101] 	X.Org ANSI C Emulation: 0.4
[    10.101] 	X.Org Video Driver: 20.0
[    10.101] 	X.Org XInput driver : 22.1
[    10.101] 	X.Org Server Extension : 9.0
[    10.103] (++) using VT number 7

[    10.103] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    10.104] (II) xfree86: Adding drm device (/dev/dri/card0)
[    10.107] (--) PCI:*(0:0:2:0) 8086:22b1:1849:22b1 rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64
[    10.107] (II) LoadModule: "glx"
[    10.127] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    10.152] (II) Module glx: vendor="X.Org Foundation"
[    10.152] 	compiled for 1.18.4, module version = 1.0.0
[    10.153] 	ABI class: X.Org Server Extension, version 9.0
[    10.153] (==) AIGLX enabled
[    10.153] (==) Matched intel as autoconfigured driver 0
[    10.153] (==) Matched intel as autoconfigured driver 1
[    10.153] (==) Matched modesetting as autoconfigured driver 2
[    10.153] (==) Matched fbdev as autoconfigured driver 3
[    10.153] (==) Matched vesa as autoconfigured driver 4
[    10.153] (==) Assigned the driver to the xf86ConfigLayout
[    10.153] (II) LoadModule: "intel"
[    10.160] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    10.178] (II) Module intel: vendor="X.Org Foundation"
[    10.178] 	compiled for 1.18.4, module version = 2.99.917
[    10.179] 	Module class: X.Org Video Driver
[    10.179] 	ABI class: X.Org Video Driver, version 20.0
[    10.179] (II) LoadModule: "modesetting"
[    10.179] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    10.184] (II) Module modesetting: vendor="X.Org Foundation"
[    10.184] 	compiled for 1.18.4, module version = 1.18.4
[    10.184] 	Module class: X.Org Video Driver
[    10.184] 	ABI class: X.Org Video Driver, version 20.0
[    10.184] (II) LoadModule: "fbdev"
[    10.184] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    10.185] (II) Module fbdev: vendor="X.Org Foundation"
[    10.185] 	compiled for 1.18.1, module version = 0.4.4
[    10.185] 	Module class: X.Org Video Driver
[    10.185] 	ABI class: X.Org Video Driver, version 20.0
[    10.185] (II) LoadModule: "vesa"
[    10.186] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    10.188] (II) Module vesa: vendor="X.Org Foundation"
[    10.188] 	compiled for 1.18.1, module version = 2.3.4
[    10.188] 	Module class: X.Org Video Driver
[    10.188] 	ABI class: X.Org Video Driver, version 20.0
[    10.188] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    10.189] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    10.189] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    10.189] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    10.189] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    10.189] (II) FBDEV: driver for framebuffer: fbdev
[    10.189] (II) VESA: driver for VESA chipsets: vesa
[    10.190] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[    10.190] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[    10.190] (II) intel(0): SNA compiled for use with valgrind
[    10.191] (WW) Falling back to old probe method for modesetting
[    10.192] (WW) Falling back to old probe method for fbdev
[    10.192] (II) Loading sub module "fbdevhw"
[    10.192] (II) LoadModule: "fbdevhw"
[    10.192] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    10.193] (II) Module fbdevhw: vendor="X.Org Foundation"
[    10.193] 	compiled for 1.18.4, module version = 0.0.2
[    10.193] 	ABI class: X.Org Video Driver, version 20.0
[    10.193] (WW) Falling back to old probe method for vesa
[    10.196] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[    10.196] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[    10.196] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    10.196] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    10.196] (==) intel(0): RGB weight 888
[    10.196] (==) intel(0): Default visual is TrueColor
[    10.198] (II) intel(0): Output DP1 has no monitor section
[    10.198] (II) intel(0): Enabled output DP1
[    10.198] (II) intel(0): Output HDMI1 has no monitor section
[    10.198] (II) intel(0): Enabled output HDMI1
[    10.198] (II) intel(0): Output DP2 has no monitor section
[    10.198] (II) intel(0): Enabled output DP2
[    10.198] (II) intel(0): Output HDMI2 has no monitor section
[    10.198] (II) intel(0): Enabled output HDMI2
[    10.198] (II) intel(0): Output DP3 has no monitor section
[    10.198] (II) intel(0): Enabled output DP3
[    10.198] (II) intel(0): Output HDMI3 has no monitor section
[    10.198] (II) intel(0): Enabled output HDMI3
[    10.198] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    10.198] (II) intel(0): Output VIRTUAL1 has no monitor section
[    10.198] (II) intel(0): Enabled output VIRTUAL1
[    10.199] (--) intel(0): Output HDMI1 using initial mode 1280x1024 on pipe 0
[    10.199] (==) intel(0): TearFree disabled
[    10.199] (==) intel(0): DPI set to (96, 96)
[    10.199] (II) Loading sub module "dri2"
[    10.199] (II) LoadModule: "dri2"
[    10.199] (II) Module "dri2" already built-in
[    10.199] (II) Loading sub module "present"
[    10.199] (II) LoadModule: "present"
[    10.199] (II) Module "present" already built-in
[    10.199] (II) UnloadModule: "modesetting"
[    10.199] (II) Unloading modesetting
[    10.199] (II) UnloadModule: "fbdev"
[    10.199] (II) Unloading fbdev
[    10.199] (II) UnloadSubModule: "fbdevhw"
[    10.199] (II) Unloading fbdevhw
[    10.228] (II) UnloadModule: "vesa"
[    10.228] (II) Unloading vesa
[    10.228] (==) Depth 24 pixmap format is 32 bpp
[    10.247] (II) intel(0): SNA initialized with Cherryview (gen8) backend
[    10.247] (==) intel(0): Backing store enabled
[    10.247] (==) intel(0): Silken mouse enabled
[    10.251] (II) intel(0): HW Cursor enabled
[    10.251] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    10.252] (==) intel(0): DPMS enabled
[    10.253] (==) intel(0): Display hotplug detection enabled
[    10.253] (II) intel(0): [DRI2] Setup complete
[    10.253] (II) intel(0): [DRI2]   DRI driver: i965
[    10.253] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    10.253] (II) intel(0): direct rendering: DRI2 enabled
[    10.253] (II) intel(0): hardware support for Present enabled
[    10.253] (--) RandR disabled
[    10.291] (II) SELinux: Disabled on system
[    10.391] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    10.391] (II) AIGLX: enabled GLX_ARB_create_context
[    10.391] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    10.392] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    10.392] (II) AIGLX: enabled GLX_INTEL_swap_event
[    10.392] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    10.392] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    10.392] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    10.392] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    10.392] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    10.392] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    10.392] (II) AIGLX: Loaded and initialized i965
[    10.392] (II) GLX: Initialized DRI2 GL provider for screen 0
[    10.407] (II) intel(0): switch to mode 1280x1024@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[    10.407] (II) intel(0): Setting screen physical size to 338 x 270
[    10.742] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    10.748] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    10.748] (II) LoadModule: "evdev"
[    10.748] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    10.757] (II) Module evdev: vendor="X.Org Foundation"
[    10.757] 	compiled for 1.18.1, module version = 2.10.1
[    10.758] 	Module class: X.Org XInput Driver
[    10.758] 	ABI class: X.Org XInput driver, version 22.1
[    10.758] (II) Using input driver 'evdev' for 'Power Button'
[    10.758] (**) Power Button: always reports core events
[    10.758] (**) evdev: Power Button: Device: "/dev/input/event2"
[    10.758] (--) evdev: Power Button: Vendor 0 Product 0x1
[    10.758] (--) evdev: Power Button: Found keys
[    10.758] (II) evdev: Power Button: Configuring as keyboard
[    10.758] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    10.758] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    10.758] (**) Option "xkb_rules" "evdev"
[    10.758] (**) Option "xkb_model" "pc105"
[    10.758] (**) Option "xkb_layout" "fr"
[    10.758] (**) Option "xkb_variant" "latin9"
[    11.041] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    11.041] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    11.041] (II) Using input driver 'evdev' for 'Video Bus'
[    11.041] (**) Video Bus: always reports core events
[    11.041] (**) evdev: Video Bus: Device: "/dev/input/event3"
[    11.041] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    11.041] (--) evdev: Video Bus: Found keys
[    11.041] (II) evdev: Video Bus: Configuring as keyboard
[    11.041] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event3"
[    11.041] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    11.042] (**) Option "xkb_rules" "evdev"
[    11.042] (**) Option "xkb_model" "pc105"
[    11.042] (**) Option "xkb_layout" "fr"
[    11.042] (**) Option "xkb_variant" "latin9"
[    11.043] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    11.043] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.043] (II) Using input driver 'evdev' for 'Power Button'
[    11.043] (**) Power Button: always reports core events
[    11.043] (**) evdev: Power Button: Device: "/dev/input/event0"
[    11.043] (--) evdev: Power Button: Vendor 0 Product 0x1
[    11.043] (--) evdev: Power Button: Found keys
[    11.043] (II) evdev: Power Button: Configuring as keyboard
[    11.043] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    11.043] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    11.043] (**) Option "xkb_rules" "evdev"
[    11.056] (**) Option "xkb_model" "pc105"
[    11.056] (**) Option "xkb_layout" "fr"
[    11.056] (**) Option "xkb_variant" "latin9"
[    11.057] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    11.057] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    11.058] (II) Using input driver 'evdev' for 'Sleep Button'
[    11.058] (**) Sleep Button: always reports core events
[    11.058] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    11.058] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    11.058] (--) evdev: Sleep Button: Found keys
[    11.058] (II) evdev: Sleep Button: Configuring as keyboard
[    11.058] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    11.058] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    11.058] (**) Option "xkb_rules" "evdev"
[    11.058] (**) Option "xkb_model" "pc105"
[    11.058] (**) Option "xkb_layout" "fr"
[    11.058] (**) Option "xkb_variant" "latin9"
[    11.071] (II) config/udev: Adding input device Logitech K230 (/dev/input/event5)
[    11.071] (**) Logitech K230: Applying InputClass "evdev keyboard catchall"
[    11.074] (II) Using input driver 'evdev' for 'Logitech K230'
[    11.074] (**) Logitech K230: always reports core events
[    11.074] (**) evdev: Logitech K230: Device: "/dev/input/event5"
[    11.074] (--) evdev: Logitech K230: Vendor 0x46d Product 0x400d
[    11.074] (--) evdev: Logitech K230: Found 1 mouse buttons
[    11.074] (--) evdev: Logitech K230: Found scroll wheel(s)
[    11.074] (--) evdev: Logitech K230: Found relative axes
[    11.074] (II) evdev: Logitech K230: Forcing relative x/y axes to exist.
[    11.074] (--) evdev: Logitech K230: Found absolute axes
[    11.074] (II) evdev: Logitech K230: Forcing absolute x/y axes to exist.
[    11.074] (--) evdev: Logitech K230: Found keys
[    11.074] (II) evdev: Logitech K230: Configuring as mouse
[    11.074] (II) evdev: Logitech K230: Configuring as keyboard
[    11.074] (II) evdev: Logitech K230: Adding scrollwheel support
[    11.074] (**) evdev: Logitech K230: YAxisMapping: buttons 4 and 5
[    11.074] (**) evdev: Logitech K230: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    11.074] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.2/0003:046D:C52B.0003/0003:046D:400D.0005/input/input8/event5"
[    11.074] (II) XINPUT: Adding extended input device "Logitech K230" (type: KEYBOARD, id 10)
[    11.074] (**) Option "xkb_rules" "evdev"
[    11.074] (**) Option "xkb_model" "pc105"
[    11.074] (**) Option "xkb_layout" "fr"
[    11.074] (**) Option "xkb_variant" "latin9"
[    11.075] (II) evdev: Logitech K230: initialized for relative axes.
[    11.075] (WW) evdev: Logitech K230: ignoring absolute axes.
[    11.075] (**) Logitech K230: (accel) keeping acceleration scheme 1
[    11.075] (**) Logitech K230: (accel) acceleration profile 0
[    11.076] (**) Logitech K230: (accel) acceleration factor: 2.000
[    11.076] (**) Logitech K230: (accel) acceleration threshold: 4
[    11.099] (II) config/udev: Adding input device Telink Wireless Receiver (/dev/input/event4)
[    11.099] (**) Telink Wireless Receiver: Applying InputClass "evdev pointer catchall"
[    11.099] (**) Telink Wireless Receiver: Applying InputClass "evdev keyboard catchall"
[    11.099] (II) Using input driver 'evdev' for 'Telink Wireless Receiver'
[    11.099] (**) Telink Wireless Receiver: always reports core events
[    11.099] (**) evdev: Telink Wireless Receiver: Device: "/dev/input/event4"
[    11.099] (--) evdev: Telink Wireless Receiver: Vendor 0x248a Product 0x8564
[    11.099] (--) evdev: Telink Wireless Receiver: Found 9 mouse buttons
[    11.099] (--) evdev: Telink Wireless Receiver: Found scroll wheel(s)
[    11.099] (--) evdev: Telink Wireless Receiver: Found relative axes
[    11.099] (--) evdev: Telink Wireless Receiver: Found x and y relative axes
[    11.099] (--) evdev: Telink Wireless Receiver: Found absolute axes
[    11.099] (II) evdev: Telink Wireless Receiver: Forcing absolute x/y axes to exist.
[    11.099] (--) evdev: Telink Wireless Receiver: Found keys
[    11.099] (II) evdev: Telink Wireless Receiver: Configuring as mouse
[    11.100] (II) evdev: Telink Wireless Receiver: Configuring as keyboard
[    11.100] (II) evdev: Telink Wireless Receiver: Adding scrollwheel support
[    11.100] (**) evdev: Telink Wireless Receiver: YAxisMapping: buttons 4 and 5
[    11.100] (**) evdev: Telink Wireless Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    11.100] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:248A:8564.0004/input/input7/event4"
[    11.100] (II) XINPUT: Adding extended input device "Telink Wireless Receiver" (type: KEYBOARD, id 11)
[    11.100] (**) Option "xkb_rules" "evdev"
[    11.100] (**) Option "xkb_model" "pc105"
[    11.100] (**) Option "xkb_layout" "fr"
[    11.100] (**) Option "xkb_variant" "latin9"
[    11.100] (II) evdev: Telink Wireless Receiver: initialized for relative axes.
[    11.100] (WW) evdev: Telink Wireless Receiver: ignoring absolute axes.
[    11.101] (**) Telink Wireless Receiver: (accel) keeping acceleration scheme 1
[    11.101] (**) Telink Wireless Receiver: (accel) acceleration profile 0
[    11.101] (**) Telink Wireless Receiver: (accel) acceleration factor: 2.000
[    11.101] (**) Telink Wireless Receiver: (accel) acceleration threshold: 4
[    11.102] (II) config/udev: Adding input device Telink Wireless Receiver (/dev/input/mouse0)
[    11.102] (II) No input driver specified, ignoring this device.
[    11.102] (II) This device may have been added with another device file.
[    11.103] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
[    11.103] (II) No input driver specified, ignoring this device.
[    11.103] (II) This device may have been added with another device file.
[    11.120] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    11.121] (II) No input driver specified, ignoring this device.
[    11.121] (II) This device may have been added with another device file.
[    11.121] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event10)
[    11.121] (II) No input driver specified, ignoring this device.
[    11.121] (II) This device may have been added with another device file.
[    11.122] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event11)
[    11.122] (II) No input driver specified, ignoring this device.
[    11.122] (II) This device may have been added with another device file.
[    11.143] (II) config/udev: Adding input device Nuvoton w836x7hg Infrared Remote Transceiver (/dev/input/event6)
[    11.143] (**) Nuvoton w836x7hg Infrared Remote Transceiver: Applying InputClass "evdev keyboard catchall"
[    11.143] (II) Using input driver 'evdev' for 'Nuvoton w836x7hg Infrared Remote Transceiver'
[    11.143] (**) Nuvoton w836x7hg Infrared Remote Transceiver: always reports core events
[    11.143] (**) evdev: Nuvoton w836x7hg Infrared Remote Transceiver: Device: "/dev/input/event6"
[    11.143] (--) evdev: Nuvoton w836x7hg Infrared Remote Transceiver: Vendor 0x1050 Product 0xc9
[    11.143] (--) evdev: Nuvoton w836x7hg Infrared Remote Transceiver: Found keys
[    11.143] (II) evdev: Nuvoton w836x7hg Infrared Remote Transceiver: Configuring as keyboard
[    11.143] (**) Option "config_info" "udev:/sys/devices/pnp0/00:02/rc/rc0/input9/event6"
[    11.143] (II) XINPUT: Adding extended input device "Nuvoton w836x7hg Infrared Remote Transceiver" (type: KEYBOARD, id 12)
[    11.143] (**) Option "xkb_rules" "evdev"
[    11.143] (**) Option "xkb_model" "pc105"
[    11.143] (**) Option "xkb_layout" "fr"
[    11.143] (**) Option "xkb_variant" "latin9"
[    11.158] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (nuvoton-cir) (/dev/input/event7)
[    11.158] (**) MCE IR Keyboard/Mouse (nuvoton-cir): Applying InputClass "evdev pointer catchall"
[    11.158] (**) MCE IR Keyboard/Mouse (nuvoton-cir): Applying InputClass "evdev keyboard catchall"
[    11.158] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (nuvoton-cir)'
[    11.159] (**) MCE IR Keyboard/Mouse (nuvoton-cir): always reports core events
[    11.159] (**) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): Device: "/dev/input/event7"
[    11.159] (--) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): Vendor 0 Product 0
[    11.159] (--) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): Found 3 mouse buttons
[    11.159] (--) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): Found relative axes
[    11.159] (--) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): Found x and y relative axes
[    11.159] (--) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): Found keys
[    11.159] (II) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): Configuring as mouse
[    11.159] (II) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): Configuring as keyboard
[    11.159] (**) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): YAxisMapping: buttons 4 and 5
[    11.159] (**) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    11.159] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event7"
[    11.159] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (nuvoton-cir)" (type: KEYBOARD, id 13)
[    11.159] (**) Option "xkb_rules" "evdev"
[    11.159] (**) Option "xkb_model" "pc105"
[    11.159] (**) Option "xkb_layout" "fr"
[    11.159] (**) Option "xkb_variant" "latin9"
[    11.160] (II) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): initialized for relative axes.
[    11.160] (**) MCE IR Keyboard/Mouse (nuvoton-cir): (accel) keeping acceleration scheme 1
[    11.160] (**) MCE IR Keyboard/Mouse (nuvoton-cir): (accel) acceleration profile 0
[    11.160] (**) MCE IR Keyboard/Mouse (nuvoton-cir): (accel) acceleration factor: 2.000
[    11.160] (**) MCE IR Keyboard/Mouse (nuvoton-cir): (accel) acceleration threshold: 4
[    11.180] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (nuvoton-cir) (/dev/input/mouse1)
[    11.180] (II) No input driver specified, ignoring this device.
[    11.180] (II) This device may have been added with another device file.
[    12.295] (--) intel(0): HDMI max TMDS frequency 165000KHz
[    15.319] (--) intel(0): HDMI max TMDS frequency 165000KHz
[    16.683] (--) intel(0): HDMI max TMDS frequency 165000KHz
[    50.681] (--) intel(0): HDMI max TMDS frequency 165000KHz
[    51.803] (--) intel(0): HDMI max TMDS frequency 165000KHz
[    51.993] (--) intel(0): HDMI max TMDS frequency 165000KHz
[    52.778] (--) intel(0): HDMI max TMDS frequency 165000KHz
[    61.123] (II) config/udev: removing device Logitech K230
[    61.132] (II) evdev: Logitech K230: Close
[    61.132] (II) UnloadModule: "evdev"
[    61.768] (II) config/udev: Adding input device Logitech K230 (/dev/input/event5)
[    61.768] (**) Logitech K230: Applying InputClass "evdev keyboard catchall"
[    61.768] (II) Using input driver 'evdev' for 'Logitech K230'
[    61.768] (**) Logitech K230: always reports core events
[    61.768] (**) evdev: Logitech K230: Device: "/dev/input/event5"
[    61.768] (--) evdev: Logitech K230: Vendor 0x46d Product 0x400d
[    61.768] (--) evdev: Logitech K230: Found 1 mouse buttons
[    61.768] (--) evdev: Logitech K230: Found scroll wheel(s)
[    61.768] (--) evdev: Logitech K230: Found relative axes
[    61.768] (II) evdev: Logitech K230: Forcing relative x/y axes to exist.
[    61.768] (--) evdev: Logitech K230: Found absolute axes
[    61.768] (II) evdev: Logitech K230: Forcing absolute x/y axes to exist.
[    61.768] (--) evdev: Logitech K230: Found keys
[    61.768] (II) evdev: Logitech K230: Configuring as mouse
[    61.768] (II) evdev: Logitech K230: Configuring as keyboard
[    61.768] (II) evdev: Logitech K230: Adding scrollwheel support
[    61.768] (**) evdev: Logitech K230: YAxisMapping: buttons 4 and 5
[    61.768] (**) evdev: Logitech K230: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    61.768] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.2/0003:046D:C52B.0008/0003:046D:400D.0009/input/input15/event5"
[    61.768] (II) XINPUT: Adding extended input device "Logitech K230" (type: KEYBOARD, id 10)
[    61.768] (**) Option "xkb_rules" "evdev"
[    61.768] (**) Option "xkb_model" "pc105"
[    61.769] (**) Option "xkb_layout" "fr"
[    61.769] (**) Option "xkb_variant" "latin9"
[    61.769] (WW) Option "xkb_options" requires a string value
[    61.770] (II) evdev: Logitech K230: initialized for relative axes.
[    61.770] (WW) evdev: Logitech K230: ignoring absolute axes.
[    61.776] (**) Logitech K230: (accel) keeping acceleration scheme 1
[    61.776] (**) Logitech K230: (accel) acceleration profile 0
[    61.776] (**) Logitech K230: (accel) acceleration factor: 2.000
[    61.776] (**) Logitech K230: (accel) acceleration threshold: 4
[  2184.247] (--) intel(0): HDMI max TMDS frequency 165000KHz
[ 11312.437] (II) evdev: Logitech K230: Close
[ 11312.437] (II) UnloadModule: "evdev"
[ 11312.437] (II) evdev: MCE IR Keyboard/Mouse (nuvoton-cir): Close
[ 11312.437] (II) UnloadModule: "evdev"
[ 11312.437] (II) evdev: Nuvoton w836x7hg Infrared Remote Transceiver: Close
[ 11312.438] (II) UnloadModule: "evdev"
[ 11312.438] (II) evdev: Telink Wireless Receiver: Close
[ 11312.438] (II) UnloadModule: "evdev"
[ 11312.438] (II) evdev: Sleep Button: Close
[ 11312.438] (II) UnloadModule: "evdev"
[ 11312.438] (II) evdev: Power Button: Close
[ 11312.438] (II) UnloadModule: "evdev"
[ 11312.438] (II) evdev: Video Bus: Close
[ 11312.438] (II) UnloadModule: "evdev"
[ 11312.438] (II) evdev: Power Button: Close
[ 11312.438] (II) UnloadModule: "evdev"
[ 11312.528] (II) Server terminated successfully (0). Closing log file.

J'espère ne pas me tromper dans la prez'...

ylag

Re : Démarrage de plus en plus long.

Salut,

Poste le retour de:

systemctl list-jobs

...lorsque tu obtiens «Bootup is not yet finished. Please try again later.» avec la commande systemd-analyze blame.
Ça pourrait fournir des indices aux spécialistes du démarrage.

A+

Dernière modification par ylag (Le 05/11/2019, à 13:40)

misterbean22

Re : Démarrage de plus en plus long.

;)ylag
voici le resultat :

benoit-steph@benoitsteph-desktop:~$ systemctl list-jobs
JOB UNIT                                 TYPE  STATE  
 99 plymouth-quit-wait.service           start running
  2 multi-user.target                    start waiting
110 systemd-update-utmp-runlevel.service start waiting
 31 setvtrgb.service                     start waiting
173 ureadahead-stop.timer                start waiting
125 system-getty.slice                   start waiting
  1 graphical.target                     start waiting

7 jobs listed.

ylag

Re : Démarrage de plus en plus long.

Salut,

Sauf erreur de ma part, il semble que ce soit le service plymouth-quit-wait.service -> «running» qui retarderait le lancement des six autres listés comme étant en mode «waiting», attendant la fin du lancement de plymouth-quit-wait.service pour s'exécuter.
Il faudrait pouvoir déterminer quels sont les services qui retardent le chargement de plymouth-quit-wait.service.

Une fois le démarrage complété, tu pourrais poster le retour de:

systemctl status plymouth-quit-wait.service -l --no-pager

...qui pourrait être parlant pour les spécialistes des lenteurs au démarrage.

A+

Dernière modification par ylag (Le 05/11/2019, à 14:34)

misterbean22

Re : Démarrage de plus en plus long.

voilà :  (en sachant que le démarrage n'est toujours pas complété...)

benoit-steph@benoitsteph-desktop:~$ systemctl status plymouth-quit-wait.service -l --no-pager
● plymouth-quit-wait.service - Hold until boot process finishes up
   Loaded: loaded (/lib/systemd/system/plymouth-quit-wait.service; static; vendor preset: enabled)
   Active: activating (start) since Tue 2019-11-05 08:33:38 CET; 4h 57min ago
 Main PID: 947 (plymouth)
    Tasks: 1 (limit: 4915)
   CGroup: /system.slice/plymouth-quit-wait.service
           └─947 /bin/plymouth --wait

nov. 05 08:33:38 benoitsteph-desktop systemd[1]: Starting Hold until boot process finishes up...

misterbean22

Re : Démarrage de plus en plus long.

et après redémarrage (qui je le rappelle est beaucoup moins long) :

benoit-steph@benoitsteph-desktop:~$ systemctl status plymouth-quit-wait.service -l --no-pager
● plymouth-quit-wait.service - Hold until boot process finishes up
   Loaded: loaded (/lib/systemd/system/plymouth-quit-wait.service; static; vendor preset: enabled)
   Active: inactive (dead) since Tue 2019-11-05 13:33:16 CET; 1min 18s ago
  Process: 925 ExecStart=/bin/plymouth --wait (code=exited, status=0/SUCCESS)
 Main PID: 925 (code=exited, status=0/SUCCESS)

nov. 05 13:33:02 benoitsteph-desktop systemd[1]: Starting Hold until boot process finishes up...
nov. 05 13:33:16 benoitsteph-desktop systemd[1]: Started Hold until boot process finishes up.

ylag

Re : Démarrage de plus en plus long.

Salut,

Active: activating (start) since Tue 2019-11-05 08:33:38 CET; 4h 57min ago

Là, ça coince vraiment!

Peut-être tenter de tuer le processus plymouth:

sudo killall plymouth

...si pas efficace, essayer:

sudo killall -SIGKILL plymouth

Attention, ça pourrait faire planter ton système.

Il te faudra attendre l'interventoin de spécialistes de la chose, désolé...

A+

Dernière modification par ylag (Le 05/11/2019, à 14:56)

Caribou22

Re : Démarrage de plus en plus long.

Attention, ça pourrait faire planter ton système.

Il te faudra attendre l'interventoin de spécialistes de la chose, désolé...

A+

Je suis dans le 22 si besoin

---

Ca y est, j'ai mon propre site ! :D
Mes conseils aux débutants | A lire si vous envisagez d'acheter un nouvel ordi
rmy, membre Ubuntu-fr, sauve vos données perdues

grandtoubab

Re : Démarrage de plus en plus long.

Salut
Plymouth ne sert qu'à masquer le texte sur la console et afficher une "belle ?" image pendant le boot
pour en avoir le coeur net, masquer plymouth au niveau de grub
Dans le fichier /etc/default/grub

retirer le texte splash de la ligne GRUB_CMDLINE_LINUX_DEFAULT
Si tu es vraiment gourmand, tu retires aussi le quiet , tu auras tous les messages du noyau 

puis

sudo update-grub

et reboot pour voir ce qui se passe

Dernière modification par grandtoubab (Le 05/11/2019, à 14:58)

---

Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

misterbean22

Re : Démarrage de plus en plus long.

Merci de vous pencher sur mon cas...
Donc voici ce que j'ai dans le fichier  /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

J'éfface donc "quiet splash" de la ligne 10 mais le fichier est en lecture seule...donc je ne peux pas enregistrer. (désolé de mon ignorance !). Comment passer en root sur un tel fichier, j'ai déjà vu ça quelque part, mais je ne voudrais pas faire de c...ries.

Caribou22

Re : Démarrage de plus en plus long.

Pour l'éditer, il faut passer par un terminal pour l'ouvrir avec les droits admin. Tu peux mar exemple ouvrir le fichier avec l'éditeur de texte "gedit" et en demandant les droits admin avec la commande pkexec. Ce qui donne :

pkexec gedit /etc/default/grub

---

Ca y est, j'ai mon propre site ! :D
Mes conseils aux débutants | A lire si vous envisagez d'acheter un nouvel ordi
rmy, membre Ubuntu-fr, sauve vos données perdues

misterbean22

Re : Démarrage de plus en plus long.

Voici donc , après recherche rapide !, ce que ça donne après avoir virer "quiet splash" et avant update grub :

benoit-steph@benoitsteph-desktop:~$ gksudo gedit /etc/default/grub
Gtk-Message: 22:36:13.290: Failed to load module "canberra-gtk-module"

** (gedit:4836): WARNING **: 22:36:43.058: Set document metadata failed: La définition de l’attribut metadata::gedit-encoding n’est pas prise en charge

** (gedit:4836): WARNING **: 22:36:54.327: Set document metadata failed: La définition de l’attribut metadata::gedit-spell-language n’est pas prise en charge

** (gedit:4836): WARNING **: 22:36:54.328: Set document metadata failed: La définition de l’attribut metadata::gedit-encoding n’est pas prise en charge

** (gedit:4836): WARNING **: 22:36:58.315: Set document metadata failed: La définition de l’attribut metadata::gedit-position n’est pas prise en charge

misterbean22

Re : Démarrage de plus en plus long.

Après update-grub :

benoit-steph@benoitsteph-desktop:~$ sudo update-grub
[sudo] Mot de passe de benoit-steph : 
Sourcing file `/etc/default/grub'
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-66-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-66-generic
Image Linux trouvée : /boot/vmlinuz-4.15.0-65-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-65-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait

@ caribou22 : nos messages se sont croisés ! Côtes d'armor powa !:D

misterbean22

Re : Démarrage de plus en plus long.

Reboot : done !
et du coup, j'ai refait un systemd -analyze blame :

benoit-steph@benoitsteph-desktop:~$ systemd-analyze blame
          7.552s configure-printer@usb-001-002.service
          6.380s NetworkManager-wait-online.service
          5.377s dev-sdb1.device
          3.118s snapd.service
          2.253s dev-loop15.device
          2.247s dev-loop17.device
          2.245s dev-loop18.device
          2.244s dev-loop16.device
          2.227s dev-loop14.device
          2.209s dev-loop13.device
          2.197s dev-loop12.device
          2.180s dev-loop11.device
          2.176s dev-loop9.device
          2.167s dev-loop8.device
          2.152s dev-loop10.device
          1.774s udisks2.service
          1.753s dev-loop5.device
          1.751s dev-loop7.device
          1.746s dev-loop6.device
          1.734s dev-loop4.device
          1.731s systemd-udev-trigger.service
          1.731s dev-loop3.device
          1.673s dev-loop2.device
lines 1-23

Ca semble déjà mieux... Qu'en pensez-vous ?
En attendant, j'eteins tout en mode "souris" et je vois ce que ça donne en temps d'allumage .

misterbean22

Re : Démarrage de plus en plus long.

Vous êtes bons /bonnes les ubuntiens/iennes : allumage en 1min30, tout compris....Avec quand même une petite frayeur graphique (défillement de carrés/rectangles blancs avant d'arriver sur la page d'ouverture de session !:rolleyes: mais sans impact...)
Je retente demain matin et mettrais en "résolu" si c'est toujours bon !
Merci encore !

grandtoubab

Re : Démarrage de plus en plus long.

on ne peut pas dire que ton problème soit résolu
si tu es satisfait du temps de démarrage sans plymouth , alors il reste à comprendre pourquoi plymouth pénalise autant.
As tu changé l'animation? la configuration de plymouth, etc
plymouth n'est pas exactement utilisé de la meme facon dans Debian et Ubuntu donc je n'irai pas plus loin,
Par exemple le fichier

 cat /var/lib/plymouth/boot-duration
0.118:-.mount
0.145:dev-hugepages.mount
0.145:dev-mqueue.mount
0.145:sys-kernel-debug.mount
0.148:kmod-static-nodes.service
0.150:systemd-remount-fs.service
0.152:ifupdown-wait-online.service
0.152:systemd-udev-trigger.service
0.152:ifupdown-pre.service
0.170:systemd-modules-load.service
0.171:systemd-journald.service
0.172:keyboard-setup.service
0.176:systemd-journal-flush.service
0.177:systemd-sysusers.service
0.184:systemd-sysctl.service
0.192:systemd-tmpfiles-setup-dev.service
0.200:nftables.service
0.204:systemd-timesyncd.service
0.217:systemd-hwdb-update.service
0.233:systemd-udevd.service
0.249:systemd-backlight@backlight:radeon_bl1.service
0.249:systemd-backlight@backlight:radeon_bl0.service
0.252:systemd-backlight@backlight:acpi_video0.service
0.253:systemd-backlight@backlight:acpi_video1.service
0.359:systemd-fsckd.service
0.363:dev-disk-by\x2dpath-pci\x2d0000:00:11.0\x2data\x2d1\x2dpart5.swap
0.363:dev-disk-by\x2did-ata\x2dHitachi_HTS725032A9A364_110305PCKC04BPJ0X3GK\x2dpart5.swap
0.363:dev-disk-by\x2dpartuuid-00038c4c\x2d05.swap
0.363:dev-disk-by\x2did-wwn\x2d0x5000cca645dc9889\x2dpart5.swap
0.363:dev-sda5.swap
0.363:dev-disk-by\x2duuid-60e41088\x2d15f8\x2d4d62\x2d93ba\x2d4bfcbf36c48f.swap
0.365:tmp.mount
0.387:systemd-fsck@dev-disk-by\x2duuid-0231cd69\x2d6248\x2d497c\x2da18c\x2d4d5c92666f35.service
0.392:home.mount
0.397:console-setup.service
0.401:proc-sys-fs-binfmt_misc.mount
0.402:systemd-tmpfiles-setup.service
0.405:binfmt-support.service
0.406:systemd-update-utmp.service
0.416:rpcbind.service
0.454:apparmor.service
0.456:cron.service
0.457:acpid.service
0.459:alsa-state.service
0.460:anacron.service
0.462:irqbalance.service
0.462:cups-browsed.service
0.462:dbus.service
0.473:atd.service
0.642:systemd-logind.service
0.642:dev-zram1.swap
0.642:dev-zram0.swap
0.642:rsyslog.service
0.642:smartmontools.service
0.642:zramswap.service
0.642:networking.service
0.646:lm-sensors.service
0.646:rtkit-daemon.service
0.646:bluetooth.service
0.646:wpa_supplicant.service
0.646:NetworkManager.service
0.647:iio-sensor-proxy.service
0.649:apmd.service
0.649:systemd-user-sessions.service
0.656:sddm.service
0.682:systemd-hostnamed.service
0.713:polkit.service
0.713:accounts-daemon.service
0.724:colord.service
0.730:dnsmasq.service
0.766:NetworkManager-dispatcher.service
0.777:udisks2.service
0.980:winbind.service
0.994:NetworkManager-wait-online.service
0.996:hddtemp.service
0.998:rc-local.service

Des utilisateurs de plymouth sur ubuntu en diront plus
http://manpages.ubuntu.com/manpages/bio … uth.8.html

NB: pour voir le temps complet du démarrage

systemd-analyze

Dernière modification par grandtoubab (Le 06/11/2019, à 09:32)

---

Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

misterbean22

Re : Démarrage de plus en plus long.

Salut grandtoubab !
Effectivement , ce n'est pas résolu puisque le démarrage était encore très long ce matin....
Et j'ai remarqué que je n'est plus l'affichage qui apparaît aussitôt le pc allumé au tout début (avec F1  F8,  F11 etc... pour les différents boot ou pour rentrer dans les choix du pc).

voici le résultat du systemd-analyze :

Startup finished in 5.277s (kernel) + 1min 12.847s (userspace) = 1min 18.124s
graphical.target reached after 15.313s in userspace

Ce qui me semble étrange car j'ai eu l’impression que c'était un peu plus long (mais s'il le dit...)

De plus, il ne me semble pas avoir modifier l'affichage dernièrement (ou alors mon gamin l'a fait dans mon dos....:rolleyes:).
Question subsidiaire : que change le fait d'avoir zappé plymouth ? Pas de retentissement autre à prévoir ?

Dernière modification par misterbean22 (Le 06/11/2019, à 13:02)

grandtoubab

Re : Démarrage de plus en plus long.

Plymouth ne sert qu'à masquer le texte sur la console et afficher une "belle ?" image pendant le boot

---

Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

misterbean22

Re : Démarrage de plus en plus long.

Bon, toujours le même problème ce matin : un interminable démarrage pour arriver sur la page de log
D'autres spécialistes  auraient-ils une solution ?
Merci

grandtoubab

Re : Démarrage de plus en plus long.

lors du premier démarrage de la machine il peut y avoir des tâches de mise à jour qui prennent du temps, ce temps pouvant être variable selon la quantité de mise a jour

Exemple la tache apt-daily.service , la tache unattended-upgrades

il faut comparer des évènements strictement identiques
si tu passe cette commande à chaque démarrage tu verras les différences

systemd-analyze;echo;systemd-analyze blame --no-pager

---

Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

misterbean22

Re : Démarrage de plus en plus long.

Bon, c'est de pire en pire et je ne comprend pas pourquoi.... Il a mis au moins 6 -7 min à m'afficher la page de connexion...
Je me demande si je ne vais pas lui faire un reboot complet, histoire de repartir de 0....
A moins qu'une bonne âme n'ait la solution.

Watts

Re : Démarrage de plus en plus long.

Bonjour,

Disque dur ou SSD? Y-a-t-il des comportements incohérents en dehors du boot? (Du style "no device bootable found etc.." ou des erreurs d'accès disque) Un disque dur défectueux peut être la cause d'un démarrage de plus en plus long.

---

Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04

misterbean22

Re : Démarrage de plus en plus long.

Bonjour Watts,
je suis sur ssd mais dont j'ai testé l'état de santé et c'est ok ! Pas d'erreur connue d'accès boot, à ma connaissance. Y a t'il un moyen de connaitre ces erreurs éventuelles dont tu parles, en console ?

Watts

Re : Démarrage de plus en plus long.

Justement, c'était l'état de santé qui me préoccupait. Tu as fait un rapport smart?

---

Acer Aspire X3990-Dual boot Windows 7 / Ubuntu 18.04