[Résolu] Installation UEFI + UEFI LEGACY

ar barzh paour · Le 06/04/2020, à 12:18

Questionnement sur UEFI

j'aurais voulu pouvoir tester Ubuntu en mode UEFI que je ne connais pas
j'ai donc essayé de comprendre la doc mais je ne suis pas sur d'avoir tout compris

actuellement je n'ai que des linux non uefi installés

ma question :
puis-je installer ubuntu sur un disque "dédié" à ubuntu UEFI tout en conservant mes autres OS sur les autres disques ?

Dernière modification par ar barzh paour (Le 07/04/2020, à 10:18)

Qid · Le 06/04/2020, à 12:48

ar barzh paour a écrit :

ma question :
puis-je installé ubuntu sur un disque "dédié" à ubuntu UEFI tout en conservant mes autres OS sur les autre disques ?

À partir du moment où le bios sait gérer en simultané des démarrages uefi ou pas et qu'on est bien sur un disque dur dédié pourquoi pas mais bon ce n'est pas très recommandé quand même...

Pourquoi cette demande/ce besoin ? Tu veux voir quoi comme différence ?

helias · Le 06/04/2020, à 12:56

Bonjour,
J'avoue ne pas bien comprendre la/les question(s) initiale(s) ...
Je te laisses le liens vers la doc UEFI d'ubuntu sans doute cela t'apportera des réponses.

malbo · Le 06/04/2020, à 13:28

ar barzh paour a écrit :

puis-je installé ubuntu sur un disque "dédié" à ubuntu UEFI tout en conservant mes autres OS sur les autre disques ?

Oui

ar barzh paour · Le 06/04/2020, à 16:56

Qid a écrit :

Pourquoi cette demande/ce besoin ? Tu veux voir quoi comme différence ?

la réponse dans le post #1 "tester"
étudier les partitions crées , les différences de grub .... etc

@helias
oui j'avais vu la doc
EDIT : mais pas suffisamment car la réponse est dans le paragraphe 2.5 de cette doc https://doc.ubuntu-fr.org/uefi

vu que la réponse est OUI , je vais tenter l'expérience
me reste à savoir si mon Bios sait gérer en simultané des démarrages uefi ou pas , comment le voit-on ?

Dernière modification par ar barzh paour (Le 09/04/2020, à 09:09)

Qid · Le 06/04/2020, à 17:04

ar barzh paour a écrit :

Qid a écrit :
Pourquoi cette demande/ce besoin ? Tu veux voir quoi comme différence ?
la réponse dans le post #1 "tester"
étudier les partitions crées , les différences de grub .... etc
[...]
me reste à savoir si mon Bios sait gérer en simultané des démarrages uefi ou pas , comment le voit-on ?

tu t'ennuis ?
il faut que tu cherche un truc genre "boot mode" "uefi / legacy"...

lucmars · Le 06/04/2020, à 17:12

ar a écrit :

reste à savoir si mon Bios sait gérer en simultané des démarrages uefi ou pas , comment le voit-on ?

Aucun bios à ma connaissance ne gère les boot uefi/non-uefi en simultané.

C'est l'un ou l'autre mode.

Qid · Le 06/04/2020, à 17:22

lucmars a écrit :

ar a écrit :
reste à savoir si mon Bios sait gérer en simultané des démarrages uefi ou pas , comment le voit-on ?
Aucun bios à ma connaissance ne gère les boot uefi/non-uefi en simultané.
C'est l'un ou l'autre mode.

faux... enfin plus ou moins... il est tout à fait possible que dans la séquence de démarrage le bios puisse avoir en plus de l'ordre de boot uefi ou legacy une option en amont qui puisse donner aussi un ordre entre ces deux mode... et c'est à ça que je faisais allusion mais j'avoue que j'ai voulu chercher tout-à-l'heure un screenshot pour donner une idée du truc sans trouver rapidement mon bonheur donc j'ai laissé tomber

ar barzh paour · Le 06/04/2020, à 17:31

Qid a écrit :

tu t'ennuis ?

non mais j'ai fini mes peintures et mon jardin

j'ai trouvé la réponse dans le BIOS
Boot mode select j'ai le choix UEFI ou LEGACY+UEFI ( choix actuel réglé sur LEGACY+UEFI )

FIXED BOOT ORDER Priorities
Boot option
# 1 UEFI Hard Disk
# 2 UEFI CD/DVD
# 3 UEFI Hard Disk
# 4 UEFI USB CD/DVD
# 5 UEFI USB Key
# 6 UEFI Network
# 7 Hard Disk Samsung SSD ....
# 8 CD/DVD OPtiarc
# 9 USB Hard Disk
#10 USB CD/DVD
#11 USB Key
#12 USB Floppy
#13 Network

comment je le comprends
choix 1 :si j'ai un Hard Disk UEFI , le système démarrera dessus
sinon choix 2 sinon ...choix4 sinon
choix 5 :si j'ai branché UEFI USB Key démarrage dessus
sinon ...choix 6
sinon on arrive aux choix 7 : hard disk
choix 7 Hard Disk Samsung SSD (les disques qui ne sont pas uefi)
etc

et cet ordre est modifiable par menu ce qui voudrait dire que si je passe
Hard Disk en choix 1 , le système bootera dessus en priorité

et bien sur j'ai aussi un menu Boot Hard Disk Drive BBS Priorities
Boot Option
#1 SATA5
#2 SATA1
#3 SATA3
#4 SATA2

Dernière modification par ar barzh paour (Le 09/04/2020, à 09:12)

Qid · Le 06/04/2020, à 17:45

ar barzh paour a écrit :

FIXED BOOT ORDER Priorities
Boot option
# 1 UEFI Hard Disk
# 2 UEFI CD/DVD
# 3 UEFI Hard Disk
# 4 UEFI USB CD/DVD
# 5 UEFI USB Key
# 6 UEFI Network
# 7 Hard Disk Samsung SSD ....
# 8 CD/DVD OPtiarc
# 9 USB Hard Disk
#10 USB CD/DVD
#11 USB Key
#12 USB Floppy
#13 Network
[•••]
et cet ordre est modifiable par menu ce qui voudrait dire que si je passe
Hard Disk en choix 1 , le système bootera dessus en priorité

C'est exactement à ça que je faisais allusion... Sauf que attention à comment tu va le gérer si tu ne peux pas complétement désactiver certaines options de boot : en toute logique tu ne peux pas faire passer le 7 en seconde position... Pour être plus exacte dans mes propos tout ton trafic n'est "switchable" que grâce au menu de boot rapide car les 2 GRUB ne pourront pas se voir... Par contre je serais bien curieux de savoir si une fois lancé tu arrives à accéder aux partitions des disques qui sont dans l'autre mode...

Qid · Le 06/04/2020, à 17:47

ar barzh paour a écrit :

et bien sur j'ai aussi un menu Boot Hard Disk Drive BBS Priorities
Boot Option
#1 SATA5
#2 SATA1
#3 SATA3
#4 SATA2

Hum... Du coup pour démarrer soit l'un soit l'autre de tes disques c'est plutôt ce menu là qu'il faudrait que tu utilises si tu l'as en boot menu

ar barzh paour · Le 06/04/2020, à 18:20

je m'aperçois je n'ai plus d'alim pour le disque supplémentaire que je veux installer , il me faudrait soit un adaptateur Molex/Sata soit un doubleur et en ce moment pas facile à se procurer
je vais être obligé de bidouiller

Qid a écrit :

les 2 GRUB ne pourront pas se voir

ça ca m'embête un peu quoique non rédhibitoire

Dernière modification par ar barzh paour (Le 06/04/2020, à 18:24)

Qid · Le 06/04/2020, à 18:32

ar barzh paour a écrit :

je vais être obligé de bidouiller
Qid a écrit :
les 2 GRUB ne pourront pas se voir
ça ca m'embête un peu quoique non rédhibitoire

Prend les connecteurs de ton lecteur CD si tu n'en a pas besoin

Quant au reste je te rappelle que tu veux jouer avec 2 modes d'installation différents et non compatible entre eux* donc ce que je t'ai dit n'est que pur logique...

* : La seule chose qui fait que chez toi ça marchera je te rappelle que c'est parce-que tu es sur 2 disques différents

ar barzh paour · Le 07/04/2020, à 08:06

Qid a écrit :

Prend les connecteurs de ton lecteur CD si tu n'en a pas besoin

c'est ce que j'ai fait

j'ai installé et ça marche

installation sur le disque ( réservé à cet OS UEFI)
j'avais pris la précaution de débrancher tous les autres disques (je suis quand même prudent)
puis rebranchement de mes autres disques
reboot ( le boot se fait sur le disque UEFI ) ce qui parait logique d'après l'organisation de mon BIOS
sudo update-grub
la mise à jour se fait correctement et me trouve tous les OS des autres disques
AH NON il ne me trouve pas les window XP (dont je ne me sert plus) !!!!!!
reboot
au reboot je choisis dans le grub donc ma version "normale non efi" 18.04 qui se lance , à l'écran j'ai cru voir un message concernant efi mais je n'ai pas eu le temps de le lire

menuentry 'U18.04-d1  Ubuntu, avec Linux 4.15.0-88-generic (sur /dev/sdd1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-88-generic--c14de089-0371-46f3-829f-b3d2e715d031' {
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos1 --hint-efi=hd3,msdos1 --hint-baremetal=ahci3,msdos1  c14de089-0371-46f3-829f-b3d2e715d031
		else
		  search --no-floppy --fs-uuid --set=root c14de089-0371-46f3-829f-b3d2e715d031
		fi
		linux /boot/vmlinuz-4.15.0-88-generic root=UUID=c14de089-0371-46f3-829f-b3d2e715d031 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-88-generic
	}

au passage grub multiplie toujours les menuentry de ce type

menuentry 'U18.04-a2-64b  Ubuntu, avec Linux 4.15.0-76-generic (sur /dev/sda2) (sur /dev/sdd1) (sur /dev/sda2) (sur /dev/sdd1) (sur /dev/sda2)

je vais pouvoir tester mon programme de simplification de grub

le menu de la partie 10_linux se présente ainsi

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b1e72033-59f5-47fa-84fa-5242a2580ed0' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd4,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,gpt2 --hint-efi=hd4,gpt2 --hint-baremetal=ahci4,gpt2  b1e72033-59f5-47fa-84fa-5242a2580ed0
	else
	  search --no-floppy --fs-uuid --set=root b1e72033-59f5-47fa-84fa-5242a2580ed0
	fi
        linux	/boot/vmlinuz-4.15.0-96-generic root=UUID=b1e72033-59f5-47fa-84fa-5242a2580ed0 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-96-generic
}

Dernière modification par ar barzh paour (Le 09/04/2020, à 09:15)

ar barzh paour · Le 07/04/2020, à 08:43

programme de simplification de grub doone
lancement du programmme de simplification de grub (modif_grub_V46_bis)

ZZZnum/grub-OK-2020:04:07-08:32:09-media-jpb-18-4-EFI-boot-grub-grub.cfg.txt

nombre de lignes lues                    :   2596
lignes conservées                        :   1504
lignes supprimées                        :   1092
fichier des lignes supprimées            : 
ZZZnum/grub-sup-2020:04:07-08:32:09-media-jpb-18-4-EFI-boot-grub-grub.cfg.txt

nombre de menus conservés                :    107
nombre de menus supprimés                :     91
nombre de menus avec boot conservés      :      0

lignes conservées (hors menu)            :    198
lignes conservées (menu)                 :   1306
###################################################################

91 menuentry supprimés !!!! et plus de 1000 lignes supprimées
me reste à voir s'il n'y a pas d'anomalies

Babdu89 · Le 07/04/2020, à 09:19

Bonjour.

Chez moi. Sur une machine qui permet le démarrage en UEFI et Bios_Legacy.

Le SSD interne a une table de partition de type MSDos.
Un Windows 7 (/dev/sda1)
Un Ubuntu 14.04 (/dev/sda2) en 32 bits
Un Ubuntu 18.04 (/dev/sda3). en 64 Bits

Par curiosité, j'ai voulu tester les installations en mode UEFI. J'ai donc utilisé une clé USB de tests. (/dev/sdb).
Mais comme à un moment dans les sujets du forum, on parlait de démarrage dans les deux modes, j'ai testé la possibilité de le faire.

Alors j'ai installé deux Ubuntu.
Sur la clé /dev/sdb, avec table de partition de type GPT.
/dev/sdb1;Une partition format FAT32, drapeau boot-esp pour pouvoir installer en mode UEFI et démarrer dans ce mode.

/dev/sdb2; Une partition sans format drapeau bios-grub, pour pouvoir installer et démarrer en mode Bios_Legacy.

/dev/sdb3; installation d'un Xubuntu 14.04 64 Bits en mode UEFI, utilisant la partition boot-esp /dev/sdb1 pour démarrer en mode UEFI

/dev/sdb4; installation d'un Ubuntu 18.04 en Bios Legacy, utilisant la partition bios-grub /dev/sdb2, pour démarrer en mode Bios_Legacy.

Pour voir si le Ubuntu installé en mode UEFI /dev/sdb3 était capable aussi de démarrer en mode Bios_Legacy.
Avec boot-repair en session live lancée en mode Bios_Legacy, réinstallation d'un Grub-pc (legacy) dans ce Ubuntu.

Le Ubuntu /dev/sdb3 est donc capable de démarrer en mode UEFI et Bios_Legacy.

Alors comme je suis curieux, j'ai donc observé que tous les Os de la config étaient présents dans les menus grub en mode Bios_Legacy et UEFI.

J'ai donc tenté en démarrant depuis la clé de tests en mode UEFI, depuis le menu grub du Ubuntu installé en Mode UEFI en /dev/sdb3, de lancer le Ubuntu 14.04 en 32 Bits installé sur le SSD en /dev/sda2 . il démarre dans ce mode, j'ai fais un boot-info, dont le contenu suit;

   Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos2)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 
    34402304 of the same hard drive for core.img. core.img is at this location 
    and looks for (,gpt4)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_gpt biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.6 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/extlinux/extlinux.conf 
                       /boot/grub/i386-pc/core.img

sda3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/Boot/bootx64.efi 
                       /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi

sdb2: __________________________________________________________________________

    File system:       BIOS Boot partition
    Boot sector type:  Grub2's core.img
    Boot sector info: 

sdb3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb4: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb5: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    56,383,487    56,381,440   7 NTFS / exFAT / HPFS
/dev/sda2          56,383,488   167,847,935   111,464,448  83 Linux
/dev/sda3         167,847,936   234,441,647    66,593,712  83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 63.2 GB, 63216549888 bytes
255 heads, 63 sectors/track, 7685 cylinders, total 123469824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1   123,469,823   123,469,823  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdb1            33,583,104    34,402,303       819,200 EFI System partition
/dev/sdb2            34,402,304    35,426,303     1,024,000 BIOS Boot partition
/dev/sdb3            35,426,304    79,447,788    44,021,485 Data partition (Linux)
/dev/sdb4            79,448,064   123,467,595    44,019,532 Data partition (Linux)
/dev/sdb5                 2,048    33,583,103    33,581,056 Data partition (Windows/Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        FA2AC6152AC5CF37                       ntfs       windows-7-del
/dev/sda2        041cfc74-96e1-4c0f-ad6f-61ae768a1a3c   ext4       fusion-14._dell
/dev/sda3        5a6ea26b-1d35-48fd-902d-5b78a7c8b64e   ext4       ubuntu-18.04_del
/dev/sdb1        92C8-E043                              vfat       
/dev/sdb3        72a66c99-76c9-420b-b133-77d8811a67f5   ext4       xubuntu-efi
/dev/sdb4        cb4fb6ab-daa4-405d-a278-99d4c4ca5e63   ext4       SB@
/dev/sdb5        0669-366B                              vfat       test-multi

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jun 12 16:37 ata-LDLC_07072217A2384 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 12 16:38 ata-LDLC_07072217A2384-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 12 11:24 ata-LDLC_07072217A2384-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 12 11:24 ata-LDLC_07072217A2384-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Jun 12 11:24 ata-TSSTcorp_DVD+_-RW_TS-U633J_R86X6GSZB05544 -> ../../sr0
lrwxrwxrwx 1 root root  9 Jun 12 16:37 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jun 12 11:24 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jun 12 11:24 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jun 12 11:24 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jun 12 11:24 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 Jun 12 11:24 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part5 -> ../../sdb5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda2        /                        ext4       (rw,noatime,errors=remount-ro)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="${saved_entry}"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
else
  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
	recordfail
	savedefault
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	else
	  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	fi
	linux	/boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-170-generic
}
submenu 'Options avancées pour HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux' $menuentry_id_option 'gnulinux-advanced-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-170-generic' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-170-generic-advanced-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		recordfail
	savedefault
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		echo	'Chargement de Linux 3.13.0-170-generic…'
		linux	/boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-170-generic (recovery mode)' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-170-generic-recovery-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		echo	'Chargement de Linux 3.13.0-170-generic…'
		linux	/boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-169-generic' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-169-generic-advanced-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		recordfail
	savedefault
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		echo	'Chargement de Linux 3.13.0-169-generic…'
		linux	/boot/vmlinuz-3.13.0-169-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-169-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-169-generic (recovery mode)' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-169-generic-recovery-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		echo	'Chargement de Linux 3.13.0-169-generic…'
		linux	/boot/vmlinuz-3.13.0-169-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-169-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	else
	  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	else
	  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-FA2AC6152AC5CF37' {
	savedefault
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  FA2AC6152AC5CF37
	else
	  search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
	fi
	parttool ${root} hidden-
	chainloader +1
}
menuentry 'Ubuntu 18.04.2 LTS (18.04) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
	savedefault
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	else
	  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	fi
	linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
	initrd /boot/initrd.img-4.15.0-51-generic
}
submenu 'Options avancées pour Ubuntu 18.04.2 LTS (18.04) (sur /dev/sda3)' $menuentry_id_option 'osprober-gnulinux-advanced-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
	menuentry 'Ubuntu (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-51-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-51-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-50-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-50-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-48-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-48-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-48-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-48-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-48-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-48-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		savedefault
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-48-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-48-generic
	}
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-17.10-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-17.10-desktop-amd64.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live xubuntu-16.04.3-desktop-amd64.iso dans partition Windows-7-dell" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
set isofile="/xubuntu-16.04.3-desktop-amd64.iso"
loopback loop $isofile
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live Ubuntu-16.04.4-desktop-i386.iso dans partition Windows-7-dell" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
set isofile="/ubuntu-16.04.4-desktop-i386.iso"
loopback loop $isofile
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-17.10-desktop-amd64.iso dans partition Windows-7-dell" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
set isofile="/ubuntu-17.10-desktop-amd64.iso"
loopback loop $isofile
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-18.04.2-desktop-amd64.iso dans partition Windows-7-dell" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
set isofile="/ubuntu-18.04.2-desktop-amd64.iso"
loopback loop $isofile
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
initrd (loop)/casper/initrd.lz
}
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# /
UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c   /   ext4   noatime,errors=remount-ro   0   1
--------------------------------------------------------------------------------

====================== sda2/boot/extlinux/extlinux.conf: =======================

--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update


default l0
prompt 1
timeout 50

include themes/debian/theme.cfg
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  51.518695831 = 55.317778432   boot/grub/grub.cfg                             1
  51.453849792 = 55.248150528   boot/grub/i386-pc/core.img                     1
  27.871719360 = 29.927030784   boot/vmlinuz-3.13.0-169-generic                1
  27.524066925 = 29.553741824   boot/vmlinuz-3.13.0-170-generic                1
  27.524066925 = 29.553741824   vmlinuz                                        1
  27.871719360 = 29.927030784   vmlinuz.old                                    1
  44.523830414 = 47.807098880   boot/initrd.img-3.13.0-169-generic             7
  40.680576324 = 43.680436224   boot/initrd.img-3.13.0-170-generic             4
  40.680576324 = 43.680436224   initrd.img                                     4
  44.523830414 = 47.807098880   initrd.img.old                                 7

================= sda2: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

  38.323997498 = 41.150078976   boot/extlinux/extlinux.conf                    1
  69.550109863 = 74.678861824   boot/extlinux/chain.c32                        1

============== sda2: Version of COM32(R) files used by Syslinux: ===============

 boot/extlinux/chain.c32            :  COM32R module (v4.xx)

=========================== sda3/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
else
  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	else
	  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	fi
        linux	/boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-51-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
	menuentry 'Ubuntu, avec Linux 4.15.0-51-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-51-generic-advanced-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		echo	'Chargement de Linux 4.15.0-51-generic…'
	        linux	/boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-51-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-51-generic-recovery-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		echo	'Chargement de Linux 4.15.0-51-generic…'
	        linux	/boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-50-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-50-generic-advanced-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		echo	'Chargement de Linux 4.15.0-50-generic…'
	        linux	/boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-50-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-50-generic-recovery-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		echo	'Chargement de Linux 4.15.0-50-generic…'
	        linux	/boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-50-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	else
	  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	else
	  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda3/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# /
UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e   /   ext4   noatime,errors=remount-ro   0   1

--------------------------------------------------------------------------------

=================== sda3: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 109.719470978 = 117.810384896  boot/grub/grub.cfg                             2
  92.343132019 = 99.152683008   boot/grub/i386-pc/core.img                     1
  93.465728760 = 100.358062080  boot/vmlinuz-4.15.0-50-generic                 2
  95.450103760 = 102.488768512  boot/vmlinuz-4.15.0-51-generic                 2
  95.450103760 = 102.488768512  vmlinuz                                        2
  93.465728760 = 100.358062080  vmlinuz.old                                    2
 110.981441498 = 119.165415424  boot/initrd.img-4.15.0-50-generic              7
  95.558341980 = 102.604988416  boot/initrd.img-4.15.0-51-generic              5
  95.558341980 = 102.604988416  initrd.img                                     5
 110.981441498 = 119.165415424  initrd.img.old                                 7

========================== sdb1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid 72a66c99-76c9-420b-b133-77d8811a67f5 root hd1,gpt3 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sdb3/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
else
  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
else
  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
insmod png
if background_image /usr/share/images/desktop-base/joy-grub.png; then
  true
else
  set menu_color_normal=cyan/blue
  set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/07_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.

menuentry 'XUBUNTU 14.04 EFI GNU/Linux-usb-EMTEC' --class xubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-72a66c99-76c9-420b-b133-77d8811a67f5' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
	else
	  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
	fi
	linux	/boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-117-generic
}
menuentry 'UBUNTU-18.04-usb-EMTEC' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-9852ed06-1ff4-4f5f-8f1c-b5a7ac894691' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd4,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,gpt4 --hint-efi=hd4,gpt4 --hint-baremetal=ahci4,gpt4  9852ed06-1ff4-4f5f-8f1c-b5a7ac894691
	else
	  search --no-floppy --fs-uuid --set=root 9852ed06-1ff4-4f5f-8f1c-b5a7ac894691
	fi
        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=9852ed06-1ff4-4f5f-8f1c-b5a7ac894691 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-20-generic
}

menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
	recordfail
	savedefault
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	else
	  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	fi
	linux	/boot/vmlinuz-3.13.0-142-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-142-generic
}
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-FA2AC6152AC5CF37' {
	savedefault
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  FA2AC6152AC5CF37
	else
	  search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
	fi
	parttool ${root} hidden-
	chainloader +1
}

## ligne vide
menuentry "   " { true}
## ligne de sous-titre
menuentry "-------------------     Menu Grub Classique     -------------------" {true}### END /etc/grub.d/07_custom ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'XUBUNTU 14.04 EFI GNU/Linux' --class xubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-72a66c99-76c9-420b-b133-77d8811a67f5' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
	else
	  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
	fi
	linux	/boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-117-generic
}
submenu 'Options avancées pour XUBUNTU 14.04 EFI GNU/Linux' $menuentry_id_option 'gnulinux-advanced-72a66c99-76c9-420b-b133-77d8811a67f5' {
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux, avec Linux 3.13.0-117-generic' --class xubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-117-generic-advanced-72a66c99-76c9-420b-b133-77d8811a67f5' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		echo	'Chargement de Linux 3.13.0-117-generic…'
		linux	/boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-117-generic
	}
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux, with Linux 3.13.0-117-generic (recovery mode)' --class xubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-117-generic-recovery-72a66c99-76c9-420b-b133-77d8811a67f5' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		echo	'Chargement de Linux 3.13.0-117-generic…'
		linux	/boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-117-generic
	}
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux, avec Linux 3.13.0-32-generic' --class xubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-72a66c99-76c9-420b-b133-77d8811a67f5' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		echo	'Chargement de Linux 3.13.0-32-generic…'
		linux	/boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-32-generic
	}
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux, with Linux 3.13.0-32-generic (recovery mode)' --class xubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-72a66c99-76c9-420b-b133-77d8811a67f5' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		echo	'Chargement de Linux 3.13.0-32-generic…'
		linux	/boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-32-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 92C8-E043
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 14.04.6 LTS (14.04) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	else
	  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	fi
	linux /boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.13.0-170-generic
}
submenu 'Options avancées pour Ubuntu 14.04.6 LTS (14.04) (sur /dev/sda2)' $menuentry_id_option 'osprober-gnulinux-advanced-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic--041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-170-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic--041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-170-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic-root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset
		initrd /boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-169-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-169-generic--041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-169-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-169-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-169-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-169-generic-root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-169-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset
		initrd /boot/initrd.img-3.13.0-169-generic
	}
}

menuentry 'Ubuntu 18.04.2 LTS (18.04) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	else
	  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	fi
	linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
	initrd /boot/initrd.img-4.15.0-51-generic
}
submenu 'Options avancées pour Ubuntu 18.04.2 LTS (18.04) (sur /dev/sda3)' $menuentry_id_option 'osprober-gnulinux-advanced-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
	menuentry 'Ubuntu (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-51-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-51-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-50-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-50-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-50-generic
	}
}

menuentry 'Ubuntu 18.04.2 LTS (18.04) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
	else
	  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
	fi
	linux /boot/vmlinuz-4.15.0-51-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-4.15.0-51-generic
}
submenu 'Options avancées pour Ubuntu 18.04.2 LTS (18.04) (sur /dev/sdb4)' $menuentry_id_option 'osprober-gnulinux-advanced-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
	menuentry 'Ubuntu (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-51-generic (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-51-generic (recovery mode) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic-root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro recovery nomodeset-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-50-generic (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic--cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-50-generic (recovery mode) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic-root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro recovery nomodeset-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-46-generic (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-46-generic--cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-46-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-46-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-46-generic (recovery mode) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-46-generic-root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro recovery nomodeset-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-46-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-46-generic
	}
	menuentry 'Ubuntu 18.04.2 LTS (18.04) (sur /dev/sda3) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu (sur /dev/sda3) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-51-generic (sur /dev/sda3) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-51-generic (recovery mode) (sur /dev/sda3) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-50-generic (sur /dev/sda3) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic--cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-50-generic (recovery mode) (sur /dev/sda3) (sur /dev/sdb4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-50-generic
	}
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-artful-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/artful-desktop-amd64.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live Ubuntu17.10-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-17.10-desktop-amd64.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb3/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb3 during installation
UUID=72a66c99-76c9-420b-b133-77d8811a67f5 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sdb1 during installation
UUID=92C8-E043  /boot/efi       vfat    defaults        0       1
#UUID=92C8-E043	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sdb3: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  21.382862091 = 22.959673344   boot/grub/grub.cfg                             1
  19.077713013 = 20.484538368   boot/vmlinuz-3.13.0-117-generic                2
  19.308181763 = 20.732002304   boot/vmlinuz-3.13.0-117-generic.efi.signed     1
  17.878444672 = 19.196833792   boot/vmlinuz-3.13.0-32-generic                 2
  17.878444672 = 19.196833792   vmlinuz                                        2
  21.895526886 = 23.510142976   boot/initrd.img-3.13.0-117-generic             2
  19.528972626 = 20.969074688   boot/initrd.img-3.13.0-32-generic              2
  19.528972626 = 20.969074688   initrd.img                                     2
  19.528972626 = 20.969074688   initrd.img.old                                 2

=========================== sdb4/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
else
  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
	else
	  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
	fi
        linux	/boot/vmlinuz-4.15.0-51-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-51-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
	menuentry 'Ubuntu, avec Linux 4.15.0-51-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-51-generic-advanced-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		echo	'Chargement de Linux 4.15.0-51-generic…'
	        linux	/boot/vmlinuz-4.15.0-51-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-51-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-51-generic-recovery-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		echo	'Chargement de Linux 4.15.0-51-generic…'
	        linux	/boot/vmlinuz-4.15.0-51-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-50-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-50-generic-advanced-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		echo	'Chargement de Linux 4.15.0-50-generic…'
	        linux	/boot/vmlinuz-4.15.0-50-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-50-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-50-generic-recovery-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		echo	'Chargement de Linux 4.15.0-50-generic…'
	        linux	/boot/vmlinuz-4.15.0-50-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-46-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-46-generic-advanced-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		echo	'Chargement de Linux 4.15.0-46-generic…'
	        linux	/boot/vmlinuz-4.15.0-46-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-46-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-46-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-46-generic-recovery-cb4fb6ab-daa4-405d-a278-99d4c4ca5e63' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt4'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		else
		  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
		fi
		echo	'Chargement de Linux 4.15.0-46-generic…'
	        linux	/boot/vmlinuz-4.15.0-46-generic root=UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-46-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
	else
	  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4  cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
	else
	  search --no-floppy --fs-uuid --set=root cb4fb6ab-daa4-405d-a278-99d4c4ca5e63
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-FA2AC6152AC5CF37' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  FA2AC6152AC5CF37
	else
	  search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
	fi
	parttool ${root} hidden-
	chainloader +1
}
menuentry 'Ubuntu 14.04.6 LTS (14.04) (sur /dev/sda2)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	else
	  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
	fi
	linux /boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.13.0-170-generic
}
submenu 'Options avancées pour Ubuntu 14.04.6 LTS (14.04) (sur /dev/sda2)' $menuentry_id_option 'osprober-gnulinux-advanced-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic--041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-170-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic--041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-170-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic-root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset
		initrd /boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-169-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-169-generic--041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-169-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-169-generic
	}
	menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-169-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-169-generic-root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		else
		  search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
		fi
		linux /boot/vmlinuz-3.13.0-169-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset
		initrd /boot/initrd.img-3.13.0-169-generic
	}
}

menuentry 'Ubuntu 18.04.2 LTS (18.04) (sur /dev/sda3)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	else
	  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
	fi
	linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
	initrd /boot/initrd.img-4.15.0-51-generic
}
submenu 'Options avancées pour Ubuntu 18.04.2 LTS (18.04) (sur /dev/sda3)' $menuentry_id_option 'osprober-gnulinux-advanced-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
	menuentry 'Ubuntu (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-51-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-51-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-51-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-51-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-51-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-50-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-50-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-50-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-50-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-50-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-48-generic (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-48-generic--5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-48-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro quiet splash $vt_handoff
		initrd /boot/initrd.img-4.15.0-48-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-48-generic (recovery mode) (sur /dev/sda3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.15.0-48-generic-root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e' {
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		else
		  search --no-floppy --fs-uuid --set=root 5a6ea26b-1d35-48fd-902d-5b78a7c8b64e
		fi
		linux /boot/vmlinuz-4.15.0-48-generic root=UUID=5a6ea26b-1d35-48fd-902d-5b78a7c8b64e ro recovery nomodeset
		initrd /boot/initrd.img-4.15.0-48-generic
	}
}

menuentry 'Ubuntu 14.04.1 LTS (14.04) (sur /dev/sdb3)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-72a66c99-76c9-420b-b133-77d8811a67f5' {
	insmod part_gpt
	insmod ext2
	set root='hd1,gpt3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
	else
	  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
	fi
	linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.13.0-117-generic
}
submenu 'Options avancées pour Ubuntu 14.04.1 LTS (14.04) (sur /dev/sdb3)' $menuentry_id_option 'osprober-gnulinux-advanced-72a66c99-76c9-420b-b133-77d8811a67f5' {
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux-usb-EMTEC (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-117-generic.efi.signed--72a66c99-76c9-420b-b133-77d8811a67f5' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-117-generic
	}
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-117-generic.efi.signed--72a66c99-76c9-420b-b133-77d8811a67f5' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-117-generic
	}
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux, avec Linux 3.13.0-117-generic (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-117-generic.efi.signed--72a66c99-76c9-420b-b133-77d8811a67f5' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-117-generic
	}
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux, with Linux 3.13.0-117-generic (recovery mode) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-117-generic.efi.signed-root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset-72a66c99-76c9-420b-b133-77d8811a67f5' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset
		initrd /boot/initrd.img-3.13.0-117-generic
	}
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux, avec Linux 3.13.0-32-generic (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--72a66c99-76c9-420b-b133-77d8811a67f5' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
		initrd /boot/initrd.img-3.13.0-32-generic
	}
	menuentry 'XUBUNTU 14.04 EFI GNU/Linux, with Linux 3.13.0-32-generic (recovery mode) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic-root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset-72a66c99-76c9-420b-b133-77d8811a67f5' {
		insmod part_gpt
		insmod ext2
		set root='hd1,gpt3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3  72a66c99-76c9-420b-b133-77d8811a67f5
		else
		  search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
		fi
		linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset
		initrd /boot/initrd.img-3.13.0-32-generic
	}
}

set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb4/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# /
UUID=cb4fb6ab-daa4-405d-a278-99d4c4ca5e63   /   ext4   noatime,errors=remount-ro   0   1
--------------------------------------------------------------------------------

=================== sdb4: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  43.153488159 = 46.335705088   boot/grub/grub.cfg                             3
  54.364910126 = 58.373877760   boot/grub/i386-pc/core.img                     1
  38.649311066 = 41.499381760   boot/vmlinuz-4.15.0-46-generic                 2
  57.364166260 = 61.594304512   boot/vmlinuz-4.15.0-50-generic                 1
  39.395416260 = 42.300506112   boot/vmlinuz-4.15.0-51-generic                 1
  39.395416260 = 42.300506112   vmlinuz                                        1
  57.364166260 = 61.594304512   vmlinuz.old                                    1
  44.689357758 = 47.984832512   boot/initrd.img-4.15.0-46-generic              3
  58.529434204 = 62.845501440   boot/initrd.img-4.15.0-50-generic              4
  53.093406677 = 57.008611328   boot/initrd.img-4.15.0-51-generic              6
  53.093406677 = 57.008611328   initrd.img                                     6
  58.529434204 = 62.845501440   initrd.img.old                                 4

=============================== StdErr Messages: ===============================

File descriptor 7 (/proc/18150/mounts) leaked on lvs invocation. Parent PID 32334: bash
File descriptor 63 (pipe:[87908]) leaked on lvs invocation. Parent PID 32334: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-info 20190612_1637 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.

boot-info is executed in installed-session (Ubuntu 14.04.6 LTS, trusty, Ubuntu, i686)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash

=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 14.04.6 LTS CurrentSession:linux
/dev/sda3:Ubuntu 18.04.2 LTS (18.04):Ubuntu:linux
/dev/sdb3:Ubuntu 14.04.1 LTS (14.04):Ubuntu1:linux
/dev/sdb4:Ubuntu 18.04.2 LTS (18.04):Ubuntu2:linux

=================== blkid:
/dev/sda1: LABEL="windows-7-del" UUID="FA2AC6152AC5CF37" TYPE="ntfs"
/dev/sda2: LABEL="fusion-14._dell" UUID="041cfc74-96e1-4c0f-ad6f-61ae768a1a3c" TYPE="ext4"
/dev/sda3: LABEL="ubuntu-18.04_del" UUID="5a6ea26b-1d35-48fd-902d-5b78a7c8b64e" TYPE="ext4"
/dev/sdb1: UUID="92C8-E043" TYPE="vfat"
/dev/sdb3: LABEL="xubuntu-efi" UUID="72a66c99-76c9-420b-b133-77d8811a67f5" TYPE="ext4"
/dev/sdb4: LABEL="SB@" UUID="cb4fb6ab-daa4-405d-a278-99d4c4ca5e63" TYPE="ext4"
/dev/sdb5: LABEL="test-multi" UUID="0669-366B" TYPE="vfat"


2 disks with OS, 4 OS : 4 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda1.

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdb ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root      4096 mai   30 22:34 grub.d
total 84
-rwxr-xr-x 1 root root  9791 déc.  19  2015 00_header
-rwxr-xr-x 1 root root  6058 avril 10  2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11  2014 10_linux
-rwxr-xr-x 1 root root 10412 avril 11  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11  2014 30_os-prober
-rwxr-xr-x 1 root root  1418 août   2  2016 30_uefi-firmware
-rwxr-xr-x 1 root root  2996 mai   30 22:34 40_custom
-rwxr-xr-x 1 root root  4622 mai   30 21:01 40_custom~
-rwxr-xr-x 1 root root   216 avril  9  2013 41_custom
-rw-r--r-- 1 root root   483 avril  9  2013 README


=================== /etc/grub.d/40_custom :
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-17.10-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-17.10-desktop-amd64.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live xubuntu-16.04.3-desktop-amd64.iso dans partition Windows-7-dell" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
set isofile="/xubuntu-16.04.3-desktop-amd64.iso"
loopback loop $isofile
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live Ubuntu-16.04.4-desktop-i386.iso dans partition Windows-7-dell" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
set isofile="/ubuntu-16.04.4-desktop-i386.iso"
loopback loop $isofile
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-17.10-desktop-amd64.iso dans partition Windows-7-dell" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
set isofile="/ubuntu-17.10-desktop-amd64.iso"
loopback loop $isofile
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-18.04.2-desktop-amd64.iso dans partition Windows-7-dell" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
set isofile="/ubuntu-18.04.2-desktop-amd64.iso"
loopback loop $isofile
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
initrd (loop)/casper/initrd.lz
}




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_SAVEDEFAULT="true"
GRUB_DEFAULT="saved"
#GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
#GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_DISTRIBUTOR=`echo -n HYBRYDE FUSION 14.04_Dell-Latitude-E4310`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

GRUB_BACKGROUND="/etc/remastersys/grub.jpg"




=================== sda2saved_entry=osprober-gnulinux-simple-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e/grub/grubenv :
saved_entry=osprober-gnulinux-simple-5a6ea26b-1d35-48fd-902d-5b78a7c8b64e




=================== sda3/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 avril  6 09:21 grub.d
total 80
-rwxr-xr-x 1 root root 10046 févr.  8 00:20 00_header
-rwxr-xr-x 1 root root  6258 mars   4  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars   4  2018 10_linux
-rwxr-xr-x 1 root root 11298 mars   4  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rw-r--r-- 1 root root 12059 mars   4  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 mars   4  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars   4  2018 40_custom
-rwxr-xr-x 1 root root   216 mars   4  2018 41_custom
-rw-r--r-- 1 root root   483 mars   4  2018 README




=================== sda3/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



Presence of EFI/Boot file detected: /mnt/boot-sav/sdb1/EFI/Boot/bootx64.efi

=================== sdb3/etc/grub.d/ :
drwxr-xr-x  2 root root        4096 mars   8  2018 grub.d
total 88
-rwxr-xr-x 1 root root  9791 août   2  2016 00_header
-rwxr-xr-x 1 root root  6058 mai    8  2014 05_debian_theme
-rwxr-xr-x 1 root root  3217 mai    4  2018 07_custom
-rwxr-xr-x 1 root root 11608 mai   15  2014 10_linux
-rwxr-xr-x 1 root root 10412 mai   15  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root   170 oct.  30  2017 25_custom
-rwxr-xr-x 1 root root 11692 mai   15  2014 30_os-prober
-rwxr-xr-x 1 root root  1418 août   2  2016 30_uefi-firmware
-rwxr-xr-x 1 root root  1730 mars  25  2018 40_custom
-rwxr-xr-x 1 root root   723 juil.  9  2017 40_custom~
-rwxr-xr-x 1 root root   216 mai   15  2014 41_custom
-rw-r--r-- 1 root root   483 mai   15  2014 README


=================== sdb3/etc/grub.d/40_custom :
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-artful-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/artful-desktop-amd64.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live Ubuntu17.10-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-17.10-desktop-amd64.iso"
loopback loop $isofile
#echo	'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo	'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}




=================== sdb3/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
#GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_DISTRIBUTOR=`echo -n XUBUNTU 14.04 EFI`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sdb3: UUID=92C8-E043   (sdb1)

=================== sdb3saved_entry=gnulinux-simple-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c/grub/grubenv :
saved_entry=gnulinux-simple-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c




=================== sdb4/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 mai   31 23:42 grub.d
total 80
-rwxr-xr-x 1 root root 10046 févr.  8 00:20 00_header
-rwxr-xr-x 1 root root  6258 mars   4  2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars   4  2018 10_linux
-rwxr-xr-x 1 root root 11298 mars   4  2018 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars   4  2018 30_os-prober
-rwxr-xr-x 1 root root  1418 mars   4  2018 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars   4  2018 40_custom
-rwxr-xr-x 1 root root   216 mars   4  2018 41_custom
-rw-r--r-- 1 root root   483 mars   4  2018 README




=================== sdb4/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== efibootmgr -v
Fatal: Couldn't open either sysfs or procfs directories for accessing EFI variables.
Try 'modprobe efivars' as root.

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ng	grub2,	grub-pc grub-efi ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, .
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sda3	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda3.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdb1.
sdb3	: sdb,	not-sepboot,	grubenv-ng	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdb3.
sdb4	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdb4.
sdb5	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sdb5.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: GPT,	BIOS_boot,	has-correctEFI, 	usb-disk,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:120GB:scsi:512:512:msdos:ATA LDLC;
1:1049kB:28.9GB:28.9GB:ntfs::boot;
2:28.9GB:85.9GB:57.1GB:ext4::;
3:85.9GB:120GB:34.1GB:ext4::;

Error: The backup GPT table is corrupt, but the primary appears OK, so that will be used.
BYT;
/dev/sdb:63.2GB:scsi:512:512:gpt: USB DISK 3.0;
5:1049kB:17.2GB:17.2GB:fat32::msftdata;
1:17.2GB:17.6GB:419MB:fat32::boot;
2:17.6GB:18.1GB:524MB:::bios_grub;
3:18.1GB:40.7GB:22.5GB:ext4::;
4:40.7GB:63.2GB:22.5GB:ext4::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        111,8G
sda1  part ntfs    26,9G windows-7-del
sda2  part ext4    53,2G fusion-14._dell
sda3  part ext4    31,8G ubuntu-18.04_del
sdb   disk         58,9G
sdb1  part vfat     400M
sdb2  part          500M
sdb3  part ext4      21G xubuntu-efi
sdb4  part ext4      21G SB@
sdb5  part vfat      16G test-multi
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      0  0  0 running
sda1     0  0  0         /mnt/boot-sav/sda1
sda2     0  0  0         /
sda3     0  0  0         /mnt/boot-sav/sda3
sdb      1  0  1 running
sdb1     1  0  1         /mnt/boot-sav/sdb1
sdb2     1  0  1
sdb3     1  0  1         /mnt/boot-sav/sdb3
sdb4     1  0  1         /mnt/boot-sav/sdb4
sdb5     1  0  1         /mnt/boot-sav/sdb5
sr0      1  0  1 running


=================== mount:
/dev/sda2 on / type ext4 (rw,noatime,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=bernard)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type ext4 (rw)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw)
/dev/sdb3 on /mnt/boot-sav/sdb3 type ext4 (rw)
/dev/sdb4 on /mnt/boot-sav/sdb4 type ext4 (rw)
/dev/sdb5 on /mnt/boot-sav/sdb5 type vfat (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb3 sdb4 sdb5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  agpgart autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdb2 sdb3 sdb4 sdb5 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vboxusb vga_arbiter vhci vhost-net video0 watchdog watchdog0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  fd 4f 5c 03 00 00 00 00  |.........O.....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  37 cf c5 2a 15 c6 2a fa  |........7..*..*.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  20 00 40 00 00 70 00 02  |........ .@..p..|
00000020  00 80 0c 00 1f 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 43 e0 c8 92 20  20 20 20 20 20 20 20 20  |..)C...         |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb5
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 20 20 00  |.X.mkfs.fat..  .|
00000010  02 00 00 00 00 f8 00 00  20 00 40 00 00 08 00 00  |........ .@.....|
00000020  00 68 00 02 03 20 00 00  00 00 00 00 02 00 00 00  |.h... ..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 6b 36 69 06 74  65 73 74 2d 6d 75 6c 74  |..)k6i.test-mult|
00000050  69 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |i FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs     379M  1.3M  377M   1% /run
/dev/sda2      ext4       53G   28G   22G  57% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.9G  260K  1.9G   1% /run/shm
none           tmpfs     100M   12K  100M   1% /run/user
/dev/sda1      fuseblk    27G   25G  2.2G  93% /mnt/boot-sav/sda1
/dev/sda3      ext4       32G   25G  5.3G  83% /mnt/boot-sav/sda3
/dev/sdb1      vfat      400M  4.7M  395M   2% /mnt/boot-sav/sdb1
/dev/sdb3      ext4       21G  4.2G   16G  22% /mnt/boot-sav/sdb3
/dev/sdb4      ext4       21G   17G  2.6G  87% /mnt/boot-sav/sdb4
/dev/sdb5      vfat       17G   15G  1.6G  91% /mnt/boot-sav/sdb5

=================== fdisk -l:

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00040603

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048    56383487    28190720    7  HPFS/NTFS/exFAT
/dev/sda2        56383488   167847935    55732224   83  Linux
/dev/sda3       167847936   234441647    33296856   83  Linux

Disk /dev/sdb: 63.2 GB, 63216549888 bytes
255 heads, 63 sectors/track, 7685 cylinders, total 123469824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1   123469823    61734911+  ee  GPT



** (zenity:26662): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-lXMjNKCWcy: Connexion refusée
User choice: Est-ce que sda (msdos) est un disque amovible ? no




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda2 into the MBRs of all disks (except live-disks and removable disks without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s


=================== Advice in case of suggested repair
EFI détecté. Vous souhaiterez peut-être ré-essayer après avoir activé l'option [Partition /boot/efi séparée :].
Voulez-vous continuer ?


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (msdos) !


=================== User settings
The settings chosen by the user will not act on the boot.

/dev/sda2        041cfc74-96e1-4c0f-ad6f-61ae768a1a3c   ext4       fusion-14._dell

boot-info is executed in installed-session (Ubuntu 14.04.6 LTS, trusty, Ubuntu, i686)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-170-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
SecureBoot disabled.

=================== efibootmgr -v
Fatal: Couldn't open either sysfs or procfs directories for accessing EFI variables.
Try 'modprobe efivars' as root.

Donc, oui, on peut installer dans les deux mode sur une machine qui le permet.

Nota;

Quel que soit le mode de démarrage de la machine, on ne voit pas de diférence de fonctionnement dans le système démarré.

@+. Babdu89 .

Dernière modification par Babdu89 (Le 07/04/2020, à 09:46)

Qid · Le 07/04/2020, à 09:39

Vous vous compliquez tellement la vie que je n'ai rien compris... Tu peux résumer ? T'es entrain de dire que le multiboot dans les 2 modes est aussi valable sur un seul et même disque à partir du moment où le bios le gère aussi ?

Nasman · Le 07/04/2020, à 09:44

Autre possibilité qui concerne le boot en mode bios :
Installer la première partie de grub-pc dans le mbr du disque de boot (boot.img)
Installer diskboot.img (le chargeur de core.img) dans un autre disque.

Ceci est possible car on trouve dans le mbr à l'offset 5c la LBA de diskboot.img (01 pour disque msdos ou emplacement de bios_boot pour disque gpt) mais aussi parce qu'il reste la possibilité de charger diskboot.img sur un autre disque que le disque de boot, comparaison de l'offset 64h (de mémoire) avec la valeur FFh :
- si la valeur en 64h est FFh alors c'est dans le disque de boot (donc dans le même que boot.img)
- si la valeur est 80h, alors chargement dans le premier disque détecté
- si la valeur est 81h, alors chargement dans le deuxième disque détecté
- si la valeur est 82h, alors chargement dans le troisième disque détecté...

Les options d'installation ne permettent pas cette bidouille mais cette possibilité est présente dans le code - il suffit de modifier l'octet en question avec un éditeur hexa

ar barzh paour · Le 07/04/2020, à 09:46

bonjour Babdu89
oui ça a l'air de fonctionner
dmesg sur ce disque me fait gagner 5 secondes par rapport à non uefi

[   18.184084] rfkill: input handler disabled

(au lieu de 23.xxxx)

le grub du disque EFI m'a permis de lancerun OS non UEFI d'un autre disque
je n'ai pas encore fait l'inverse , mais ça va venir ...

je constate que le grub possède ce menu qui n'existe pas en non UEFI ou alors je ne l'ai pas remarqué
ce menuentry lance le menu du BIOS !!!! bien pratique (mais peut-être dangereux ?)

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

autres remarque
dans le BIOS j'ai eu quelques modifications
choix supplémentaire

UEFI Hard Disk Drive BBS Priorities  (donne : ubuntu (P5 <nom du disque uefi>)

en plus du choix qui existait auparavant
Hard Disk Drive BBS Priorities (donne Sata6 ( à nouveau le disque UEFI) puis sata 2 3 5 1 (les autres disques dont l'ordre a été modifié)

remarques: lors de l'installation j'ai eus des erreurs ( le disque est pratiquement neuf )

SQUASHS squash-read-data failed read blocks cbb... (11 lignes en tout)
print_req error I/O error dev loop sector 417242 à 58 (de 2 en 2) soit 9 lignes)

j'ai quelques erreurs dans le journal sans que je sache si c'est important ou non
comme il n'y en a pas trop je les indique ci-dessous

avril 07 08:53:34 jpb-MS-7A70 kernel: Couldn't get size: 0x800000000000000e
avril 07 08:53:34 jpb-MS-7A70 kernel: MODSIGN: Couldn't get UEFI db list
avril 07 08:53:34 jpb-MS-7A70 kernel: Couldn't get size: 0x800000000000000e

avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc0183, key code 226): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc1005, key code 212): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc101f, key code 108): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc1020, key code 103): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc1041, key code 421): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc1042, key code 423): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc1043, key code 397): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc1044, key code 149): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc1045, key code 202): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc1046, key code 203): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc1048, key code 430): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc104a, key code 136): Invalid argument
avril 07 08:53:34 jpb-MS-7A70 systemd-udevd[335]: Error calling EVIOCSKEYCODE on device node '/dev/input/event4' (scan code 0xc104c, key code 162): Invalid argument


avril 07 08:53:39 jpb-MS-7A70 spice-vdagent[1654]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0

avril 07 08:53:40 jpb-MS-7A70 colord-sane[1293]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
avril 07 08:53:40 jpb-MS-7A70 colord-sane[1293]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
avril 07 08:53:40 jpb-MS-7A70 colord-sane[1293]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
avril 07 08:53:40 jpb-MS-7A70 colord-sane[1293]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
avril 07 08:53:40 jpb-MS-7A70 colord-sane[1293]: io/hpmud/pp.c 627: unable to read device-id ret=-1

avril 07 08:53:41 jpb-MS-7A70 /hpfax[1773]: [1773]: error: Failed to create /var/spool/cups/tmp/.hplip
avril 07 08:53:41 jpb-MS-7A70 hp[1769]: io/hpmud/pp.c 627: unable to read device-id ret=-1
avril 07 08:53:42 jpb-MS-7A70 /hpfax[1773]: io/hpmud/pp.c 627: unable to read device-id ret=-1

j'ai aussi quelques snap que je n'ai pas en non uefi

jpb@jpb-MS-7A70:~$ snap list
Nom                   Version    Révision  Suivi     Éditeur     Notes
core                  16-2.33.1  4917      stable    canonical✓  core
gnome-3-26-1604       3.26.0     70        stable/…  canonical✓  -
gnome-calculator      3.28.2     180       stable/…  canonical✓  -
gnome-characters      3.28.2     103       stable/…  canonical✓  -
gnome-logs            3.28.2     37        stable/…  canonical✓  -
gnome-system-monitor  3.28.2     51        stable/…  canonical✓  -
gtk-common-themes     0.1        319       stable/…  canonical✓  -
jpb@jpb-MS-7A70:~$

Dernière modification par ar barzh paour (Le 09/04/2020, à 09:18)

ar barzh paour · Le 07/04/2020, à 09:55

Qid a écrit :

Vous vous compliquez tellement la vie que je n'ai rien compris... Tu peux résumer ?

tu t'adresses à qui ?

@ Nasmann
c'est un peu compliqué pour moi , j'ai peur de m'y perdre

Babdu89 · Le 07/04/2020, à 09:55

Qid a écrit :

Vous vous compliquez tellement la vie que je n'ai rien compris... Tu peux résumer ? T'es entrain de dire que le multiboot dans les 2 modes est aussi valable sur un seul et même disque à partir du moment où le bios le gère aussi ?

Bonjour Qid.

En période de confinement, bidouiller les ordinateurs, et participer a des sujets du forum, aide pas mal à passer le temps, non?.

Le test que j'ai fais sur la clé USB, peut très bien être fait en instalation sur le SSD interne de la machine, mais il faut tout réinstaller.

Sur mon SSD, il y a aussi un Windows7 installé en mode Bios_Legacy. Lui ne démarre que lorsque la machine est démarrée en mode Bios_Legacy, soit depuis le SSD, soit depuis la clé de tests. En mode UEFI, il ne démarre pas ce qui est normal.

@+. Babdu89 .

ar barzh paour · Le 07/04/2020, à 10:17

bon voila : j'ai booter sur mon disque non EFI , mis à jour le grub
le grub me trouve bien l'OS UEFI et je l'ai lancé et c'est bon
remarque ce grub "non UEFI" m'a retrouvé mes OS Windows XP que le grub de UEFI n'avait pas trouvés

Babdu89 a écrit :

En mode UEFI, il [window7] ne démarre pas ce qui est normal.

c'est peut-être pour ça que XP n'est pas détecté en UEFI ?

me reste maintenant à demander au bios de bboter par défaut sur le disque non UEFI puisque c'est ma version "normale" de travail
(j'espère que c'est possible)

je passe le post en Résolu

Dernière modification par ar barzh paour (Le 09/04/2020, à 09:22)

Nasman · Le 07/04/2020, à 10:23

ar barzh paour a écrit :

@ Nasmann
c'est un peu compliqué pour moi , j'ai peur de m'y perdre

Une analyse du code présent dans le mbr
https://doc.ubuntu-fr.org/la_partie_executable_du_mbr

Nasman · Le 07/04/2020, à 10:28

ar barzh paour a écrit :

me reste maintenant à demander au bios de bboter par défaut sur le disque non UEFI puisque c'est ma version "normale" de travail
(j'espère que c'est possible)
je passe le post en Résolu

Si ton bios ne veut pas, il reste la possibilité d'implanter du code dans le "mbr protector" d'un disque gpt (même si celui ci est destiné au boot uefi), de démarrer en mode bios sur ce disque et de bidouiller l'octet à l'offset 64h pour lui dire de poursuivre le chargement avec le diskboot et core.img du disque qui t'intéresse

ar barzh paour · Le 07/04/2020, à 10:58

Nasman merci pour le lien du post#23 je vais regarder
oups la ça fait un bail que j'ai étudié le 8086 et les instructions 80186 80386 etc !!!

je ne réussis pas à changer l'ordre de boot du HD UEFI (mais je pense que c'est possible et que je ne sais pas faire)
par contre j'ai désactivé le choix 1, ce qui fait booter sur le choix 7 (Hard Disk Sam...) et me satisfait (je ne comprends d'ailleurs pas le choix 3 UEFI Hard Disk !)
l'ordre n'est pas modifiable !!

FIXED BOOT ORDER Priorities
Boot option
# 1  désactivé
# 2  UEFI CD/DVD 
# 3  UEFI Hard Disk
# 4  UEFI USB CD/DVD
# 5  UEFI USB Key
# 6  UEFI Network
# 7  Hard Disk Samsung SSD ....
# 8  CD/DVD OPtiarc
# 9  USB Hard Disk
#10  USB CD/DVD
#11  USB Key
#12  USB Floppy
#13  Network

ni là
Hard Disk Drive BBS Priorities (donne Sata6 ( à nouveau le disque UEFI) puis sata 2 3 5 1 (les autres disques dont l'ordre a été modifié)
impossible mettre sata6 après les autres (ou équivalent les autres avant sata6 !)

Dernière modification par ar barzh paour (Le 07/04/2020, à 11:45)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 06/04/2020, à 12:18

[Résolu] Installation UEFI + UEFI LEGACY

#2 Le 06/04/2020, à 12:48

Re : [Résolu] Installation UEFI + UEFI LEGACY

#3 Le 06/04/2020, à 12:56

Re : [Résolu] Installation UEFI + UEFI LEGACY

#4 Le 06/04/2020, à 13:28

Re : [Résolu] Installation UEFI + UEFI LEGACY

#5 Le 06/04/2020, à 16:56

Re : [Résolu] Installation UEFI + UEFI LEGACY

#6 Le 06/04/2020, à 17:04

Re : [Résolu] Installation UEFI + UEFI LEGACY

#7 Le 06/04/2020, à 17:12

Re : [Résolu] Installation UEFI + UEFI LEGACY

#8 Le 06/04/2020, à 17:22

Re : [Résolu] Installation UEFI + UEFI LEGACY

#9 Le 06/04/2020, à 17:31

Re : [Résolu] Installation UEFI + UEFI LEGACY

#10 Le 06/04/2020, à 17:45

Re : [Résolu] Installation UEFI + UEFI LEGACY

#11 Le 06/04/2020, à 17:47

Re : [Résolu] Installation UEFI + UEFI LEGACY

#12 Le 06/04/2020, à 18:20

Re : [Résolu] Installation UEFI + UEFI LEGACY

#13 Le 06/04/2020, à 18:32

Re : [Résolu] Installation UEFI + UEFI LEGACY

#14 Le 07/04/2020, à 08:06

Re : [Résolu] Installation UEFI + UEFI LEGACY

#15 Le 07/04/2020, à 08:43

Re : [Résolu] Installation UEFI + UEFI LEGACY

#16 Le 07/04/2020, à 09:19

Re : [Résolu] Installation UEFI + UEFI LEGACY

#17 Le 07/04/2020, à 09:39

Re : [Résolu] Installation UEFI + UEFI LEGACY

#18 Le 07/04/2020, à 09:44

Re : [Résolu] Installation UEFI + UEFI LEGACY

#19 Le 07/04/2020, à 09:46

Re : [Résolu] Installation UEFI + UEFI LEGACY

#20 Le 07/04/2020, à 09:55

Re : [Résolu] Installation UEFI + UEFI LEGACY

#21 Le 07/04/2020, à 09:55

Re : [Résolu] Installation UEFI + UEFI LEGACY

#22 Le 07/04/2020, à 10:17

Re : [Résolu] Installation UEFI + UEFI LEGACY

#23 Le 07/04/2020, à 10:23

Re : [Résolu] Installation UEFI + UEFI LEGACY

#24 Le 07/04/2020, à 10:28

Re : [Résolu] Installation UEFI + UEFI LEGACY

#25 Le 07/04/2020, à 10:58

Re : [Résolu] Installation UEFI + UEFI LEGACY

Pied de page des forums