Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/07/2020, à 15:15

panda666

Probleme boot,mbr,initramfs unpacking failed

Bonjour, Je n'arrive plus a booté Ubuntu 20.04Lts budgie et je n'ai plus la partion de windows ny meme windows boot secure.En allumant le pc jai la page noir avc pleins de message d'erreurs style:Initramfs unpacking failed,(sdb) no caching mode page found, failed READ FPDMA QUEUED ect.Je penses que j'ai des cylindres abîmés. merci de votre dépannage je ne suis pas un geek.

Hors ligne

#2 Le 16/07/2020, à 15:20

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

Comment faire pour vous envoyé des fotos ou journal svp,merci?

Hors ligne

#3 Le 16/07/2020, à 15:28

xubu1957

Re : Probleme boot,mbr,initramfs unpacking failed

Bonjour,

Voir > [Tuto] Poster une image

ou > la méthode de moko138 pour poster une image, ou plutôt sa miniature cliquable.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#4 Le 16/07/2020, à 15:48

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

Hors ligne

#5 Le 16/07/2020, à 15:50

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

Bonjour merci Xubu1957 et peux tu repondre a mon probleme de mbr ou initramfs j'ai mis un sujet sans reponse,?merci

Hors ligne

#6 Le 16/07/2020, à 15:53

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

Hors ligne

#7 Le 16/07/2020, à 15:55

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

Comment envoyé le journal de mon disque dur?

Hors ligne

#8 Le 16/07/2020, à 16:02

geole

Re : Probleme boot,mbr,initramfs unpacking failed

Bonjour
Peux-tu booter avec un support d'installation de logiciel libre que tu as, puis installer l'application smartmontools avec cette commande

sudo apt-get install --no-install-recommends smartmontools 

et publier l'état du disque dur qui est probablement sda avec cette commande

sudo smartctl  -s on   -a /dev/sda

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

En ligne

#9 Le 16/07/2020, à 16:04

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

oui avec tixi terminal et ca me fait une gde page comment t'envoyé ca?

Hors ligne

#10 Le 16/07/2020, à 16:05

xubu1957

Re : Probleme boot,mbr,initramfs unpacking failed

Tu devrais lire le premier message du tutoriel Retour utilisable de commande.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#11 Le 16/07/2020, à 16:07

geole

Re : Probleme boot,mbr,initramfs unpacking failed

Normalement tu devrais pouvoir    sélectionner ce qui s'affiche  à l'écran pour faire copier et coller dans la discussion avec les clics droits de la souris


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

En ligne

#12 Le 16/07/2020, à 16:08

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

je mets comment le resulat ici du terminal?

Hors ligne

#13 Le 16/07/2020, à 16:13

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

ubuntu-budgie@ubuntu-budgie:~$ sudo smartctl  -s on   -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
Device Model:     TOSHIBA DT01ACA100
Serial Number:    18AWL5TMS
LU WWN Device Id: 5 000039 fd5cc8a4a
Firmware Version: MS2OA8K0
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jul 16 15:04:01 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x84)    Offline data collection activity
                    was suspended by an interrupting command from host.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         ( 7458) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 125) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   057   057   016    Pre-fail  Always       -       658575820
  2 Throughput_Performance  0x0005   051   051   054    Pre-fail  Offline  FAILING_NOW 3019
  3 Spin_Up_Time            0x0007   199   199   024    Pre-fail  Always       -       100 (Average 131)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       553
  5 Reallocated_Sector_Ct   0x0033   001   001   005    Pre-fail  Always   FAILING_NOW 1997
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   113   113   020    Pre-fail  Offline      -       35
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       1071
10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       553
192 Power-Off_Retract_Count 0x0032   069   069   000    Old_age   Always       -       38005
193 Load_Cycle_Count        0x0012   069   069   000    Old_age   Always       -       38005
194 Temperature_Celsius     0x0002   150   150   000    Old_age   Always       -       40 (Min/Max 11/47)
196 Reallocated_Event_Count 0x0032   001   001   000    Old_age   Always       -       3001
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       40
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 35605 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 35605 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 70 68 70 04  Error: UNC 8 sectors at LBA = 0x04706870 = 74475632

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 70 68 70 e0 08      02:11:05.579  READ DMA EXT
  25 00 08 68 68 70 e0 08      02:11:02.375  READ DMA EXT
  25 00 08 60 68 70 e0 08      02:10:59.138  READ DMA EXT
  25 00 08 58 68 70 e0 08      02:10:55.868  READ DMA EXT
  25 00 08 50 68 70 e0 08      02:10:52.532  READ DMA EXT

Error 35604 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 f8 69 70 04  Error: UNC 8 sectors at LBA = 0x047069f8 = 74476024

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 f8 69 70 e0 08      02:09:29.051  READ DMA EXT
  25 00 08 d0 69 70 e0 08      02:09:25.881  READ DMA EXT
  25 00 08 e0 69 70 e0 08      02:09:22.751  READ DMA EXT
  25 00 08 20 6a 70 e0 08      02:09:19.573  READ DMA EXT
  25 00 08 d0 6a 70 e0 08      02:09:16.394  READ DMA EXT

Error 35603 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 00 6d 70 04  Error: UNC 8 sectors at LBA = 0x04706d00 = 74476800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 6d 70 e0 08      02:08:46.433  READ DMA EXT
  ec 00 01 00 00 00 00 08      02:08:46.424  IDENTIFY DEVICE
  c8 00 08 00 02 00 e0 08      02:07:31.939  READ DMA
  25 00 08 a8 6d 70 e0 08      02:07:28.708  READ DMA EXT
  c8 00 08 80 00 00 e0 08      02:07:28.708  READ DMA

Error 35602 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 70 68 70 04  Error: UNC 8 sectors at LBA = 0x04706870 = 74475632

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 70 68 70 e0 08      02:06:20.070  READ DMA EXT
  25 00 08 68 68 70 e0 08      02:06:16.875  READ DMA EXT
  25 00 08 60 68 70 e0 08      02:06:13.646  READ DMA EXT
  25 00 08 58 68 70 e0 08      02:06:10.451  READ DMA EXT
  25 00 08 50 68 70 e0 08      02:06:07.255  READ DMA EXT

Error 35601 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 00 6d 70 04  Error: UNC 8 sectors at LBA = 0x04706d00 = 74476800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 6d 70 e0 08      02:04:11.592  READ DMA EXT
  ef 10 02 00 00 00 a0 08      02:04:11.439  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      02:04:11.439  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      02:04:11.437  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      02:04:11.436  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Selective offline   Completed: read failure       60%       927         502896
# 2  Short offline       Completed: read failure       50%       927         502896
# 3  Short offline       Completed: read failure       50%       926         502896
# 4  Short offline       Completed: read failure       50%       926         502896

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA     MAX_LBA  CURRENT_TEST_STATUS
    1        0  1953525167  Completed [00% left] (1387664-1453199)
    2        0           0  Not_testing
    3        0           0  Not_testing
    4        0           0  Not_testing
    5        0           0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ubuntu-budgie@ubuntu-budgie:~$

Hors ligne

#14 Le 16/07/2020, à 16:15

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

voila jespere et avc bcp de remerciement que tu peux m'éclairé ya bcp de failed !

Hors ligne

#15 Le 16/07/2020, à 16:19

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

si tu ne peux pas m'aider envoie ca a un autre si tu connais qqun de plus geek hi merci

Hors ligne

#16 Le 16/07/2020, à 16:20

xubu1957

Re : Probleme boot,mbr,initramfs unpacking failed

Voir règles du forum > balises BB code

Balise CODE :

C'est la balise à utiliser pour donner de longs messages d'erreurs, des contenus de fichiers de configuration, des commandes à taper, etc … Elle permet des messages plus "compacts", et est moins ambiguë que d'autres polices sur certains caractères.

Pour ajouter toi-même les balises code à ton précédent message #13 :

  • Cliquer sur  le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message

moko138 a écrit :

1) Les balises-code sont les < > (crochets bleus) de la barre de mise en forme.

1578811399.jpg


_ _ _

(edit=messages regroupés)
_ _ _

Dernière modification par xubu1957 (Le 16/07/2020, à 17:31)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#17 Le 16/07/2020, à 16:31

geole

Re : Probleme boot,mbr,initramfs unpacking failed

panda666 a écrit :
 sudo smartctl  -s on   -a /dev/sda
=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
Device Model:     TOSHIBA DT01ACA100
Sector Sizes:     512 bytes logical, 4096 bytes physical

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  2 Throughput_Performance  0x0005   051   051   054    Pre-fail  Offline  FAILING_NOW 3019
  5 Reallocated_Sector_Ct   0x0033   001   001   005    Pre-fail  Always   FAILING_NOW 1997

197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       40

Error 35605 occurred at disk power-on lifetime: 1071 hours '  Error: UNC 8 sectors at LBA =  74475632

Réponse très  simple
    Si ton disque est sous garantie, c'est le moment de la faire jouer.
    Si tes données personnelles ne sont que  sur ce disque, cela  ne va pas être simple de les récupérer car  les performances sont minables.   (La duplication  risque   de mal se terminer) 
   Si tu ne boote pas, c'est qu'il y a 40 secteurs qui sont totalement illisibles et qui sont très certainement des fichiers nécessaires au boot.
Note qu'il y en a déjà eu 1997 de récupérés au dernier moment.  Maintenant   le stock de secteurs de rechange est épuisé.

Dernière modification par geole (Le 16/07/2020, à 16:40)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

En ligne

#18 Le 16/07/2020, à 16:31

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

    ubuntu-budgie@ubuntu-budgie:~$ smartools
smartools: command not found
ubuntu-budgie@ubuntu-budgie:~$ sudo apt-get install --no-install-recommends smartmontools 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
smartmontools is already the newest version (7.1-1build1).
0 upgraded, 0 newly installed, 0 to remove and 264 not upgraded.
ubuntu-budgie@ubuntu-budgie:~$ sudo smartctl  -s on   -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
Device Model:     TOSHIBA DT01ACA100
Serial Number:    18AWL5TMS
LU WWN Device Id: 5 000039 fd5cc8a4a
Firmware Version: MS2OA8K0
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jul 16 15:30:23 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 7458) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 125) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   057   057   016    Pre-fail  Always       -       658575820
  2 Throughput_Performance  0x0005   051   051   054    Pre-fail  Offline  FAILING_NOW 3019
  3 Spin_Up_Time            0x0007   199   199   024    Pre-fail  Always       -       100 (Average 131)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       553
  5 Reallocated_Sector_Ct   0x0033   001   001   005    Pre-fail  Always   FAILING_NOW 1997
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   113   113   020    Pre-fail  Offline      -       35
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       1071
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       553
192 Power-Off_Retract_Count 0x0032   069   069   000    Old_age   Always       -       38005
193 Load_Cycle_Count        0x0012   069   069   000    Old_age   Always       -       38005
194 Temperature_Celsius     0x0002   146   146   000    Old_age   Always       -       41 (Min/Max 11/47)
196 Reallocated_Event_Count 0x0032   001   001   000    Old_age   Always       -       3003
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       40
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 35605 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 35605 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 70 68 70 04  Error: UNC 8 sectors at LBA = 0x04706870 = 74475632

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 70 68 70 e0 08      02:11:05.579  READ DMA EXT
  25 00 08 68 68 70 e0 08      02:11:02.375  READ DMA EXT
  25 00 08 60 68 70 e0 08      02:10:59.138  READ DMA EXT
  25 00 08 58 68 70 e0 08      02:10:55.868  READ DMA EXT
  25 00 08 50 68 70 e0 08      02:10:52.532  READ DMA EXT

Error 35604 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 f8 69 70 04  Error: UNC 8 sectors at LBA = 0x047069f8 = 74476024

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 f8 69 70 e0 08      02:09:29.051  READ DMA EXT
  25 00 08 d0 69 70 e0 08      02:09:25.881  READ DMA EXT
  25 00 08 e0 69 70 e0 08      02:09:22.751  READ DMA EXT
  25 00 08 20 6a 70 e0 08      02:09:19.573  READ DMA EXT
  25 00 08 d0 6a 70 e0 08      02:09:16.394  READ DMA EXT

Error 35603 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 00 6d 70 04  Error: UNC 8 sectors at LBA = 0x04706d00 = 74476800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 6d 70 e0 08      02:08:46.433  READ DMA EXT
  ec 00 01 00 00 00 00 08      02:08:46.424  IDENTIFY DEVICE
  c8 00 08 00 02 00 e0 08      02:07:31.939  READ DMA
  25 00 08 a8 6d 70 e0 08      02:07:28.708  READ DMA EXT
  c8 00 08 80 00 00 e0 08      02:07:28.708  READ DMA

Error 35602 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 70 68 70 04  Error: UNC 8 sectors at LBA = 0x04706870 = 74475632

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 70 68 70 e0 08      02:06:20.070  READ DMA EXT
  25 00 08 68 68 70 e0 08      02:06:16.875  READ DMA EXT
  25 00 08 60 68 70 e0 08      02:06:13.646  READ DMA EXT
  25 00 08 58 68 70 e0 08      02:06:10.451  READ DMA EXT
  25 00 08 50 68 70 e0 08      02:06:07.255  READ DMA EXT

Error 35601 occurred at disk power-on lifetime: 1071 hours (44 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 00 6d 70 04  Error: UNC 8 sectors at LBA = 0x04706d00 = 74476800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 6d 70 e0 08      02:04:11.592  READ DMA EXT
  ef 10 02 00 00 00 a0 08      02:04:11.439  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      02:04:11.439  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      02:04:11.437  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      02:04:11.436  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Selective offline   Completed: read failure       60%       927         502896
# 2  Short offline       Completed: read failure       50%       927         502896
# 3  Short offline       Completed: read failure       50%       926         502896
# 4  Short offline       Completed: read failure       50%       926         502896

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA     MAX_LBA  CURRENT_TEST_STATUS
    1        0  1953525167  Completed [00% left] (1977488-2043023)
    2        0           0  Not_testing
    3        0           0  Not_testing
    4        0           0  Not_testing
    5        0           0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ubuntu-budgie@ubuntu-budgie:~$ 
               

comme ca?

Hors ligne

#19 Le 16/07/2020, à 16:32

xubu1957

Re : Probleme boot,mbr,initramfs unpacking failed

On s'esquinte moins les yeux. Merci. smile


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#20 Le 16/07/2020, à 16:35

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

peux tu m'aidez?j'ai plus rien ny windows boot  secure ny possibilté de booté linux merci

Hors ligne

#21 Le 16/07/2020, à 16:37

xubu1957

Re : Probleme boot,mbr,initramfs unpacking failed

Tu as vu la réponse, de geole, au #17 ?

Dernière modification par xubu1957 (Le 16/07/2020, à 17:32)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#22 Le 16/07/2020, à 16:44

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

oui jai bien mis la reponse du terminal en balise mais il ne ma pas répondut sur mon probleme

Hors ligne

#23 Le 16/07/2020, à 16:51

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

         Ya pa moyens de réparrés ses 40 secteurs avec le terminal?

Hors ligne

#24 Le 16/07/2020, à 16:54

panda666

Re : Probleme boot,mbr,initramfs unpacking failed

badblocks tu connais?

Hors ligne

#25 Le 16/07/2020, à 16:57

geole

Re : Probleme boot,mbr,initramfs unpacking failed

Il me semble pourtant avoir été clair:   Le disque est destiné à aller au recyclage  des déchets électroniques.
J'ai extrait les lignes.
Avec  deux failing_now, que peux-tu espérer de plus?

J'ai malgré tout proposé une duplication  de ce qu'il sera possible au cas où tu n'aurais pas pensé à avoir un double de tes données personnelles.
Pour développer cette partie, j'attends de savoir si c'est nécessaire. Il te faudra alors t'équiper d'un autre disque de réception d'au moins la même taille   et travailler avec un support d'installation de préférence persistent ou installer ubuntu dans un autre disque.


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

En ligne