#1 Le 25/01/2021, à 12:12
- herveD
blocage ouverture session et error loading operating system
Bonjour,
J'ai un gros soucis depuis ~10-15 jours.
Quand j'ouvre la boite de connexion en journée (ouverture de session), j'attends pendant un temps infini (1 fois sur 2) ce qui m'oblige à rebooter.
Si je reboot, j'ai un message d'erreur :"error loading operating system". En lançant le bios après plusieurs tentatives, j’arrive à relancer Ubuntu.
C'est insupportable et inquiétant car j'ai l’impression que cela s'aggrave!
Pour l'instant je n’éteins plus l'ordi et je ne mets plus en veille (pas écolo).
C'est peut-être arrivé après une maj ubuntu ? ou une relance après un crash ?
j'observe aussi qu'il est très long d'accéder au sytème de fichier quand je veux enregistrer certains fichiers ou accèder à un répertoire comme si le processeur ou l'accès disque posait problème!
J'ai vérifié tout mes disques durs avec le gestionnaire de disques qui ne voit pas de problèmes.
le disque de lancement ou se trouve Ubuntu est récent SS et <2ans
Je me demande si les problèmes précédents ne seraient pas plus ou moins liés à une défaillance matériel qui s'annonce! mais quel composant ??
Avez-vous des pistes sur ce que je dois envisager car selon, cela demande soit pas mal de temps et/ou d'argent si je dois racheter une ordi 
- maj de paquet
- réinstallation complète ubuntu
- changement d'ordi
question subsidiaire
En regardant jai un premier secteur fat. Je ne penses pas que cela soit le problème car je fonctionne comme cela depuis plus d'un an mais pour une autre fois que me conseillez-vous pour le disque de boot (uniquement etf4+luks) ?
https://pic.infini.fr/TdMQRFAF/UIYpQU43.png
Ma config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#2 Le 25/01/2021, à 21:53
- jpoc
Re : blocage ouverture session et error loading operating system
Ca sent le disque dur fatigué
smartctl est une commande disponible sur Linux dans le package smartmontools.
Comme son nom l'indique l'outil interroge les entrées SMART de vos disques.
Cela permet de vérifier si le disque dur rencontre des erreurs internes sur Linux.
ta partition /dev/sda6
smartctl /dev/sda6Hors ligne
#3 Le 26/01/2021, à 10:42
- herveD
Re : blocage ouverture session et error loading operating system
Bonjour
Ok cela serait le moindre mal. jai donc installé cette commande et lancé la smartcl avec -a
Je vois qq warnings mais je ne sais pas interprété si c'est grave, résoluble et s'il recommande de refaire un autre test ?
smartctl /dev/sda1 -a
[sudo] Mot de passe de rvnux :
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-38-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 850 EVO 250GB
Serial Number: S21PNXBG515367X
LU WWN Device Id: 5 002538 d4015d70f
Firmware Version: EMT01B6Q
User Capacity: 250059350016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jan 26 11:23:31 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 133) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 29045
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1809
177 Wear_Leveling_Count 0x0013 092 092 000 Pre-fail Always - 152
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 073 051 000 Old_age Always - 27
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 266
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 69576369323
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Dernière modification par herveD (Le 26/01/2021, à 12:25)
Ma config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#4 Le 26/01/2021, à 16:45
- jpoc
Re : blocage ouverture session et error loading operating system
faudrait le faire sur le disque entier , la partition systeme est sur /dev/sda6
voir s'il y a des erreurs :
smartctl -l error /dev/sdaHors ligne
#5 Le 26/01/2021, à 17:26
- herveD
Re : blocage ouverture session et error loading operating system
re
Bon apparemment cet utilitaire confirme que je n'ai rien sur le disque système (vérifié les 4 partitions) et le ssd données
Bonne chose éliminée
De plus remarque par rapport 1er post, je n'ai plus de plantage mais tjs temps plus long qu'avant pour aller chercher un fichier à ouvrir !
smartctl -l error /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-38-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
No Errors LoggedDernière modification par herveD (Le 26/01/2021, à 17:28)
Ma config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#6 Le 26/01/2021, à 20:06
- jpoc
Re : blocage ouverture session et error loading operating system
dans un terminal
toppour voir si un processus est trop gourmand
messages d'erreur ? :
cat /var/log/dmesg/var/log/kern.log*journalctl -bVoir si la carte video est pas fatiguée
Dernière modification par jpoc (Le 26/01/2021, à 20:06)
Hors ligne
#7 Le 26/01/2021, à 20:51
- herveD
Re : blocage ouverture session et error loading operating system
Re
Oulala masi comment faites vous pour retrouver LE problème quand il y a des mega sorties de log comme les 2 derniers !!!???
sudo /var/log/kern.log*
[sudo] Mot de passe de rvnux :
sudo: /var/log/kern.log : commande introuvabletop - 19:32:19 up 2 days, 4:11, 1 user, load average: 2,70, 1,60, 1,37
Tâches: 389 total, 1 en cours, 388 en veille, 0 arrêté, 0 zombie
%Cpu(s): 19,2 ut, 7,4 sy, 0,0 ni, 72,5 id, 0,9 wa, 0,0 hi, 0,0 si, 0,0 st
MiB Mem : 15848,4 total, 189,0 libr, 12026,3 util, 3633,1 tamp/cache
MiB Éch: 9972,2 total, 2416,7 libr, 7555,5 util. 1844,4 dispo Mem
PID UTIL. PR NI VIRT RES SHR S %CPU %MEM TEMPS+ COM.
1870 rvnux 20 0 1178172 125524 108040 S 18,2 0,8 283:08.73 Xorg
5179 rvnux 20 0 9,9g 289464 51472 S 15,2 1,8 249:35.45 QtWebEngineProc
4941 rvnux 20 0 5925824 2,4g 21964 S 10,6 15,7 167:11.18 MellowPlayer
2035 rvnux 20 0 4547280 247752 21164 S 7,6 1,5 142:48.86 gnome-shell
3625 rvnux 20 0 4636304 381388 62776 S 4,6 2,4 131:02.41 firefox
14859 rvnux 20 0 4400852 309076 69856 S 4,6 1,9 127:41.62 firefox
45484 rvnux 20 0 687088 29760 14664 S 4,3 0,2 89:13.22 gnome-system-mo
1789 rvnux 9 -11 9539236 8824 5816 S 3,6 0,1 44:20.42 pulseaudio
90984 rvnux 20 0 821132 25524 16668 S 3,6 0,2 0:06.79 gnome-terminal-
110348 rvnux 20 0 2556376 128620 53240 S 3,6 0,8 0:51.95 Web Content
11343 rvnux 20 0 816112 4208 3468 S 1,3 0,0 14:18.17 QtWebEngineProc
107452 rvnux 20 0 3268128 160040 49160 S 1,3 1,0 1:58.86 thunderbird
15192 rvnux 20 0 44,9g 311456 33868 S 1,0 1,9 25:00.59 WebExtensions
110412 rvnux 20 0 2534580 104740 38456 S 1,0 0,6 1:17.25 Web Content
3828 rvnux 20 0 44,9g 195440 40600 S 0,7 1,2 30:05.50 WebExtensions
40368 rvnux 20 0 2716144 153788 32600 S 0,7 0,9 36:19.25 Web Content
40665 rvnux 20 0 4360480 259664 37024 S 0,7 1,6 32:42.60 firefox
43229 rvnux 20 0 4036192 275516 47720 S 0,7 1,7 35:46.88 firefox
62198 rvnux 20 0 2780644 189412 43976 S 0,7 1,2 11:19.65 Web Content
62210 rvnux 20 0 2653956 89060 27404 S 0,7 0,5 9:51.95 Web Content
72529 rvnux 20 0 2606892 152644 45756 S 0,7 0,9 4:01.57 Web Content
93189 rvnux 20 0 3190464 155000 32844 S 0,7 1,0 7:57.11 Web Content
126168 rvnux 20 0 14856 3932 3064 R 0,7 0,0 0:00.52 top
10 root 20 0 0 0 0 I 0,3 0,0 4:31.58 rcu_sched
124 root 0 -20 0 0 0 I 0,3 0,0 3:13.40 kworker/u9:0-i915_flip
900 root 39 19 2252568 14332 2124 S 0,3 0,1 24:05.58 mono-sgen
2081 rvnux 20 0 162876 3128 2692 S 0,3 0,0 0:10.51 at-spi2-registr
3873 rvnux 20 0 2890288 159520 37912 S 0,3 1,0 8:58.32 Web Content
5057 rvnux 20 0 2804916 116184 31092 S 0,3 0,7 5:14.43 chrome
12759 rvnux 20 0 4709404 132384 32184 S 0,3 0,8 19:04.96 everdo
40444 rvnux 20 0 3358724 199488 45180 S 0,3 1,2 9:34.82 thunderbird
40747 rvnux 20 0 2641812 39624 25852 S 0,3 0,2 6:49.14 Web Content
41027 rvnux 20 0 44,6g 83560 24976 S 0,3 0,5 4:38.86 WebExtensions
43421 rvnux 20 0 20,6g 98704 27540 S 0,3 0,6 4:43.62 WebExtensions
47896 rvnux 20 0 2556144 39288 24984 S 0,3 0,2 2:18.44 Web Content
61944 rvnux 20 0 4353772 303968 52064 S 0,3 1,9 26:22.36 firefox-bin
62203 rvnux 20 0 2831548 94660 26604 S 0,3 0,6 3:52.62 Web Content
63131 rvnux 20 0 3872732 380440 28736 S 0,3 2,3 15:24.69 Web Content
63302 rvnux 20 0 2681276 75864 19992 S 0,3 0,5 1:42.75 Web Content
105544 nm-open+ 20 0 10416 1808 1592 S 0,3 0,0 1:04.32 openvpn
108006 rvnux 20 0 2702092 102412 29888 S 0,3 0,6 3:45.57 Web Content
116876 rvnux 20 0 2493344 69004 31260 S 0,3 0,4 0:07.23 Web Content
117527 rvnux 20 0 2593184 109040 33612 S 0,3 0,7 2:49.15 Web Content
121624 rvnux 20 0 2804304 185324 34220 S 0,3 1,1 0:37.72 Web Content
122282 rvnux 20 0 2529660 89292 33688 S 0,3 0,6 0:08.22 Web Content
125554 rvnux 20 0 2525688 107416 62976 S 0,3 0,7 0:04.03 Web Content
125972 root 20 0 0 0 0 I 0,3 0,0 0:01.07 kworker/2:3-events
125990 root 20 0 0 0 0 I 0,3 0,0 0:00.62 kworker/3:2-events ci-dessous j'ai essayé d'extraire uniquement les warnings en rouge mais il y a beaucoup plus de lignes jaunes et tout cela en qq mn.
Incapable de sortir l'essentiel ou le problématique !
journalctl -b
-- Logs begin at Fri 2020-12-11 19:00:04 CET, end at Tue 2021-01-26 19:37:26 CET. --
anv. 24 15:20:31 ordi kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
janv. 24 15:20:31 ordi kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
janv. 24 15:20:31 ordi kernel: No Local Variables are initialized for Method [_GTF]
janv. 24 15:20:31 ordi kernel: No Arguments are initialized for method [_GTF]
janv. 24 15:20:31 ordi kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
janv. 24 15:20:31 ordi kernel: ata3.00: supports DRM functions and may not be fully accessible
janv. 24 15:20:31 ordi kernel: ata3.00: NCQ Send/Recv Log not supported
janv. 24 15:20:31 ordi kernel: ata3.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
janv. 24 15:20:31 ordi kernel: ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
janv. 24 15:20:31 ordi kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
janv. 24 15:20:31 ordi kernel: No Local Variables are initialized for Method [_GTF]
janv. 24 15:20:31 ordi kernel: No Arguments are initialized for method [_GTF]
janv. 24 15:20:31 ordi kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
janv. 24 15:20:31 ordi kernel: ata3.00: supports DRM functions and may not be fully accessible
janv. 24 15:20:31 ordi kernel: ata3.00: NCQ Send/Recv Log not supported
janv. 24 15:21:16 ordi gdm-password][1772]: gkr-pam: unable to locate daemon control filecat /var/log/dmesg
[ 0.000000] kernel: microcode: microcode updated early to revision 0x21, date = 2019-02-13
[ 0.000000] kernel: Linux version 5.8.0-38-generic (buildd@lgw01-amd64-060) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #43~20.04.1-Ubuntu SMP Tue Jan 12 16:39:47 UTC 2021 (Ubuntu 5.8.0-38.43~20.04.1-generic 5.8.18)
[ 0.000000] kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-38-generic root=UUID=1b61e384-a0fe-4667-b22f-3a1b86fd5193 ro quiet splash vt.handoff=7
[ 0.000000] kernel: KERNEL supported cpus:
[ 0.000000] kernel: Intel GenuineIntel
[ 0.000000] kernel: AMD AuthenticAMD
[ 0.000000] kernel: Hygon HygonGenuine
[ 0.000000] kernel: Centaur CentaurHauls
[ 0.000000] kernel: zhaoxin Shanghai
[ 0.000000] kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] kernel: BIOS-provided physical RAM map:
[ 0.000000] kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] kernel: BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] kernel: BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] kernel: BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x0000000040005000-0x00000000d5dc5fff] usable
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000d5dc6000-0x00000000d63bbfff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000d63bc000-0x00000000d663bfff] ACPI NVS
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000d663c000-0x00000000d6640fff] ACPI data
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000d6641000-0x00000000d6683fff] ACPI NVS
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000d6684000-0x00000000d6dc4fff] usable
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000d6dc5000-0x00000000d6ff2fff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000d6ff3000-0x00000000d6ffffff] usable
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000d7000000-0x00000000df9fffff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] kernel: BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
[ 0.000000] kernel: NX (Execute Disable) protection: active
[ 0.000000] kernel: SMBIOS 2.7 present.
[ 0.000000] kernel: DMI: Shuttle SZ77/FZ77, BIOS 1.11 01/10/2013
[ 0.000000] kernel: tsc: Fast TSC calibration using PIT
[ 0.000000] kernel: tsc: Detected 3292.665 MHz processor
[ 0.000932] kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000933] kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000939] kernel: last_pfn = 0x41f600 max_arch_pfn = 0x400000000
[ 0.000943] kernel: MTRR default type: uncachable
[ 0.000943] kernel: MTRR fixed ranges enabled:
[ 0.000944] kernel: 00000-9FFFF write-back
[ 0.000945] kernel: A0000-BFFFF uncachable
[ 0.000946] kernel: C0000-CFFFF write-protect
[ 0.000946] kernel: D0000-E7FFF uncachable
[ 0.000947] kernel: E8000-FFFFF write-protect
[ 0.000947] kernel: MTRR variable ranges enabled:
[ 0.000948] kernel: 0 base 000000000 mask C00000000 write-back
[ 0.000949] kernel: 1 base 400000000 mask FE0000000 write-back
[ 0.000950] kernel: 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000950] kernel: 3 base 0D8000000 mask FF8000000 uncachable
[ 0.000951] kernel: 4 base 0D7800000 mask FFF800000 uncachable
[ 0.000951] kernel: 5 base 41F800000 mask FFF800000 uncachable
[ 0.000952] kernel: 6 base 41F600000 mask FFFE00000 uncachable
[ 0.000952] kernel: 7 disabled
[ 0.000953] kernel: 8 disabled
[ 0.000953] kernel: 9 disabled
[ 0.001388] kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001559] kernel: total RAM covered: 16238M
[ 0.001819] kernel: gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 246M
[ 0.001820] kernel: gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 246M
[ 0.001821] kernel: gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 246M
[ 0.001822] kernel: gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 246M
[ 0.001823] kernel: gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 246M
[ 0.001823] kernel: gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 246M
[ 0.001824] kernel: gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 246M
[ 0.001825] kernel: gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 246M
[ 0.001825] kernel: gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.001826] kernel: gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.001827] kernel: gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.001827] kernel: gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.001828] kernel: gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.001829] kernel: gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.001829] kernel: gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.001830] kernel: *BAD*gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.001831] kernel: gran_size: 128K chunk_size: 128K num_reg: 10 lose cover RAM: 246M
[ 0.001832] kernel: gran_size: 128K chunk_size: 256K num_reg: 10 lose cover RAM: 246M
[ 0.001833] kernel: gran_size: 128K chunk_size: 512K num_reg: 10 lose cover RAM: 246M
[ 0.001833] kernel: gran_size: 128K chunk_size: 1M num_reg: 10 lose cover RAM: 246M
[ 0.001834] kernel: gran_size: 128K chunk_size: 2M num_reg: 10 lose cover RAM: 246M
[ 0.001835] kernel: gran_size: 128K chunk_size: 4M num_reg: 10 lose cover RAM: 246M
[ 0.001835] kernel: gran_size: 128K chunk_size: 8M num_reg: 10 lose cover RAM: 246M
[ 0.001836] kernel: gran_size: 128K chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.001837] kernel: gran_size: 128K chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.001837] kernel: gran_size: 128K chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.001838] kernel: gran_size: 128K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.001839] kernel: gran_size: 128K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.001839] kernel: gran_size: 128K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.001840] kernel: gran_size: 128K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.001841] kernel: *BAD*gran_size: 128K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.001841] kernel: gran_size: 256K chunk_size: 256K num_reg: 10 lose cover RAM: 246M
[ 0.001842] kernel: gran_size: 256K chunk_size: 512K num_reg: 10 lose cover RAM: 246M
[ 0.001843] kernel: gran_size: 256K chunk_size: 1M num_reg: 10 lose cover RAM: 246M
[ 0.001844] kernel: gran_size: 256K chunk_size: 2M num_reg: 10 lose cover RAM: 246M
[ 0.001844] kernel: gran_size: 256K chunk_size: 4M num_reg: 10 lose cover RAM: 246M
[ 0.001845] kernel: gran_size: 256K chunk_size: 8M num_reg: 10 lose cover RAM: 246M
[ 0.001846] kernel: gran_size: 256K chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.001846] kernel: gran_size: 256K chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.001847] kernel: gran_size: 256K chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.001848] kernel: gran_size: 256K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.001848] kernel: gran_size: 256K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.001849] kernel: gran_size: 256K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.001850] kernel: gran_size: 256K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.001850] kernel: *BAD*gran_size: 256K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.001851] kernel: gran_size: 512K chunk_size: 512K num_reg: 10 lose cover RAM: 246M
[ 0.001852] kernel: gran_size: 512K chunk_size: 1M num_reg: 10 lose cover RAM: 246M
[ 0.001852] kernel: gran_size: 512K chunk_size: 2M num_reg: 10 lose cover RAM: 246M
[ 0.001853] kernel: gran_size: 512K chunk_size: 4M num_reg: 10 lose cover RAM: 246M
[ 0.001854] kernel: gran_size: 512K chunk_size: 8M num_reg: 10 lose cover RAM: 246M
[ 0.001855] kernel: gran_size: 512K chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.001855] kernel: gran_size: 512K chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.001856] kernel: gran_size: 512K chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.001857] kernel: gran_size: 512K chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.001857] kernel: gran_size: 512K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.001858] kernel: gran_size: 512K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.001859] kernel: gran_size: 512K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.001859] kernel: *BAD*gran_size: 512K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.001860] kernel: gran_size: 1M chunk_size: 1M num_reg: 10 lose cover RAM: 246M
[ 0.001861] kernel: gran_size: 1M chunk_size: 2M num_reg: 10 lose cover RAM: 246M
[ 0.001861] kernel: gran_size: 1M chunk_size: 4M num_reg: 10 lose cover RAM: 246M
[ 0.001862] kernel: gran_size: 1M chunk_size: 8M num_reg: 10 lose cover RAM: 246M
[ 0.001863] kernel: gran_size: 1M chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.001864] kernel: gran_size: 1M chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.001864] kernel: gran_size: 1M chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.001865] kernel: gran_size: 1M chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.001866] kernel: gran_size: 1M chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.001866] kernel: gran_size: 1M chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.001867] kernel: gran_size: 1M chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.001868] kernel: *BAD*gran_size: 1M chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.001868] kernel: gran_size: 2M chunk_size: 2M num_reg: 10 lose cover RAM: 246M
[ 0.001869] kernel: gran_size: 2M chunk_size: 4M num_reg: 10 lose cover RAM: 246M
[ 0.001870] kernel: gran_size: 2M chunk_size: 8M num_reg: 10 lose cover RAM: 246M
[ 0.001870] kernel: gran_size: 2M chunk_size: 16M num_reg: 10 lose cover RAM: 0G
[ 0.001871] kernel: gran_size: 2M chunk_size: 32M num_reg: 10 lose cover RAM: 0G
[ 0.001872] kernel: gran_size: 2M chunk_size: 64M num_reg: 10 lose cover RAM: 0G
[ 0.001872] kernel: gran_size: 2M chunk_size: 128M num_reg: 10 lose cover RAM: 0G
[ 0.001873] kernel: gran_size: 2M chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.001874] kernel: gran_size: 2M chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.001874] kernel: gran_size: 2M chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.001875] kernel: *BAD*gran_size: 2M chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.001876] kernel: gran_size: 4M chunk_size: 4M num_reg: 10 lose cover RAM: 246M
[ 0.001876] kernel: gran_size: 4M chunk_size: 8M num_reg: 10 lose cover RAM: 246M
[ 0.001877] kernel: gran_size: 4M chunk_size: 16M num_reg: 10 lose cover RAM: 2M
[ 0.001878] kernel: gran_size: 4M chunk_size: 32M num_reg: 10 lose cover RAM: 2M
[ 0.001879] kernel: gran_size: 4M chunk_size: 64M num_reg: 10 lose cover RAM: 2M
[ 0.001879] kernel: gran_size: 4M chunk_size: 128M num_reg: 10 lose cover RAM: 2M
[ 0.001880] kernel: gran_size: 4M chunk_size: 256M num_reg: 10 lose cover RAM: 2M
[ 0.001881] kernel: gran_size: 4M chunk_size: 512M num_reg: 10 lose cover RAM: 2M
[ 0.001881] kernel: gran_size: 4M chunk_size: 1G num_reg: 10 lose cover RAM: 2M
[ 0.001882] kernel: *BAD*gran_size: 4M chunk_size: 2G num_reg: 10 lose cover RAM: -1022M
[ 0.001883] kernel: gran_size: 8M chunk_size: 8M num_reg: 10 lose cover RAM: 246M
[ 0.001883] kernel: gran_size: 8M chunk_size: 16M num_reg: 10 lose cover RAM: 54M
[ 0.001884] kernel: gran_size: 8M chunk_size: 32M num_reg: 9 lose cover RAM: 6M
[ 0.001885] kernel: gran_size: 8M chunk_size: 64M num_reg: 9 lose cover RAM: 6M
[ 0.001885] kernel: gran_size: 8M chunk_size: 128M num_reg: 9 lose cover RAM: 6M
[ 0.001886] kernel: gran_size: 8M chunk_size: 256M num_reg: 9 lose cover RAM: 6M
[ 0.001887] kernel: gran_size: 8M chunk_size: 512M num_reg: 9 lose cover RAM: 6M
[ 0.001887] kernel: gran_size: 8M chunk_size: 1G num_reg: 9 lose cover RAM: 6M
[ 0.001888] kernel: gran_size: 8M chunk_size: 2G num_reg: 10 lose cover RAM: 6M
[ 0.001889] kernel: gran_size: 16M chunk_size: 16M num_reg: 10 lose cover RAM: 126M
[ 0.001890] kernel: gran_size: 16M chunk_size: 32M num_reg: 9 lose cover RAM: 14M
[ 0.001890] kernel: gran_size: 16M chunk_size: 64M num_reg: 9 lose cover RAM: 14M
[ 0.001891] kernel: gran_size: 16M chunk_size: 128M num_reg: 9 lose cover RAM: 14M
[ 0.001892] kernel: gran_size: 16M chunk_size: 256M num_reg: 9 lose cover RAM: 14M
[ 0.001892] kernel: gran_size: 16M chunk_size: 512M num_reg: 9 lose cover RAM: 14M
[ 0.001893] kernel: gran_size: 16M chunk_size: 1G num_reg: 9 lose cover RAM: 14M
[ 0.001894] kernel: gran_size: 16M chunk_size: 2G num_reg: 10 lose cover RAM: 14M
[ 0.001894] kernel: gran_size: 32M chunk_size: 32M num_reg: 10 lose cover RAM: 78M
[ 0.001895] kernel: gran_size: 32M chunk_size: 64M num_reg: 9 lose cover RAM: 46M
[ 0.001896] kernel: gran_size: 32M chunk_size: 128M num_reg: 9 lose cover RAM: 46M
[ 0.001896] kernel: gran_size: 32M chunk_size: 256M num_reg: 9 lose cover RAM: 46M
[ 0.001897] kernel: gran_size: 32M chunk_size: 512M num_reg: 9 lose cover RAM: 46M
[ 0.001898] kernel: gran_size: 32M chunk_size: 1G num_reg: 9 lose cover RAM: 46M
[ 0.001898] kernel: gran_size: 32M chunk_size: 2G num_reg: 10 lose cover RAM: 46M
[ 0.001899] kernel: gran_size: 64M chunk_size: 64M num_reg: 9 lose cover RAM: 110M
[ 0.001900] kernel: gran_size: 64M chunk_size: 128M num_reg: 9 lose cover RAM: 110M
[ 0.001900] kernel: gran_size: 64M chunk_size: 256M num_reg: 9 lose cover RAM: 110M
[ 0.001901] kernel: gran_size: 64M chunk_size: 512M num_reg: 9 lose cover RAM: 110M
[ 0.001902] kernel: gran_size: 64M chunk_size: 1G num_reg: 9 lose cover RAM: 110M
[ 0.001902] kernel: gran_size: 64M chunk_size: 2G num_reg: 10 lose cover RAM: 110M
[ 0.001903] kernel: gran_size: 128M chunk_size: 128M num_reg: 7 lose cover RAM: 238M
[ 0.001904] kernel: gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 238M
[ 0.001905] kernel: gran_size: 128M chunk_size: 512M num_reg: 8 lose cover RAM: 238M
[ 0.001905] kernel: gran_size: 128M chunk_size: 1G num_reg: 8 lose cover RAM: 238M
[ 0.001906] kernel: gran_size: 128M chunk_size: 2G num_reg: 9 lose cover RAM: 238M
[ 0.001907] kernel: gran_size: 256M chunk_size: 256M num_reg: 6 lose cover RAM: 366M
[ 0.001907] kernel: gran_size: 256M chunk_size: 512M num_reg: 8 lose cover RAM: 366M
[ 0.001908] kernel: gran_size: 256M chunk_size: 1G num_reg: 8 lose cover RAM: 366M
[ 0.001909] kernel: gran_size: 256M chunk_size: 2G num_reg: 9 lose cover RAM: 366M
[ 0.001909] kernel: gran_size: 512M chunk_size: 512M num_reg: 4 lose cover RAM: 878M
[ 0.001910] kernel: gran_size: 512M chunk_size: 1G num_reg: 4 lose cover RAM: 878M
[ 0.001911] kernel: gran_size: 512M chunk_size: 2G num_reg: 4 lose cover RAM: 878M
[ 0.001911] kernel: gran_size: 1G chunk_size: 1G num_reg: 4 lose cover RAM: 878M
[ 0.001912] kernel: gran_size: 1G chunk_size: 2G num_reg: 4 lose cover RAM: 878M
[ 0.001913] kernel: gran_size: 2G chunk_size: 2G num_reg: 3 lose cover RAM: 1902M
[ 0.001914] kernel: mtrr_cleanup: can not find optimal value
[ 0.001914] kernel: please specify mtrr_gran_size/mtrr_chunk_size
[ 0.001917] kernel: e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved
[ 0.001920] kernel: last_pfn = 0xd7000 max_arch_pfn = 0x400000000
[ 0.009016] kernel: found SMP MP-table at [mem 0x000fcc70-0x000fcc7f]
[ 0.023010] kernel: check: Scanning 1 areas for low memory corruption
[ 0.023874] kernel: RAMDISK: [mem 0x31ca5000-0x34e49fff]
[ 0.023882] kernel: ACPI: Early table checksum verification disabled
[ 0.023885] kernel: ACPI: RSDP 0x00000000000F0450 000024 (v02 Shuttl)
[ 0.023887] kernel: ACPI: XSDT 0x00000000D661D078 00006C (v01 Shuttl Shuttle 01072009 AMI 00010013)
[ 0.023892] kernel: ACPI: FACP 0x00000000D66279F8 0000F4 (v04 Shuttl Shuttle 01072009 AMI 00010013)
[ 0.023897] kernel: ACPI: DSDT 0x00000000D661D178 00A87A (v02 SZ77R0 SZ77R000 00000000 INTL 20051117)
[ 0.023899] kernel: ACPI: FACS 0x00000000D663AF80 000040
[ 0.023901] kernel: ACPI: APIC 0x00000000D6627AF0 000072 (v03 Shuttl Shuttle 01072009 AMI 00010013)
[ 0.023904] kernel: ACPI: ASF! 0x00000000D6627B68 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.023906] kernel: ACPI: MCFG 0x00000000D6627C10 00003C (v01 Shuttl Shuttle 01072009 MSFT 00000097)
[ 0.023908] kernel: ACPI: SLIC 0x00000000D6627C50 000176 (v01 Shuttl Shuttle 01072009 AMI 00010013)
[ 0.023910] kernel: ACPI: HPET 0x00000000D6627DC8 000038 (v01 Shuttl Shuttle 01072009 AMI. 00000005)
[ 0.023912] kernel: ACPI: SSDT 0x00000000D6627E00 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.023915] kernel: ACPI: SSDT 0x00000000D6628170 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.023917] kernel: ACPI: SSDT 0x00000000D6628B20 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.023924] kernel: ACPI: Local APIC address 0xfee00000
[ 0.023997] kernel: No NUMA configuration found
[ 0.023997] kernel: Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
[ 0.024005] kernel: NODE_DATA(0) allocated [mem 0x41f5c9000-0x41f5f2fff]
[ 0.024331] kernel: Zone ranges:
[ 0.024332] kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.024333] kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.024333] kernel: Normal [mem 0x0000000100000000-0x000000041f5fffff]
[ 0.024334] kernel: Device empty
[ 0.024335] kernel: Movable zone start for each node
[ 0.024337] kernel: Early memory node ranges
[ 0.024338] kernel: node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.024339] kernel: node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.024339] kernel: node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.024340] kernel: node 0: [mem 0x0000000040005000-0x00000000d5dc5fff]
[ 0.024340] kernel: node 0: [mem 0x00000000d6684000-0x00000000d6dc4fff]
[ 0.024341] kernel: node 0: [mem 0x00000000d6ff3000-0x00000000d6ffffff]
[ 0.024341] kernel: node 0: [mem 0x0000000100000000-0x000000041f5fffff]
[ 0.024435] kernel: Zeroed struct page in unavailable ranges: 10065 pages
[ 0.024436] kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff]
[ 0.024438] kernel: On node 0 totalpages: 4151471
[ 0.024438] kernel: DMA zone: 64 pages used for memmap
[ 0.024439] kernel: DMA zone: 21 pages reserved
[ 0.024439] kernel: DMA zone: 3996 pages, LIFO batch:0
[ 0.024466] kernel: DMA32 zone: 13645 pages used for memmap
[ 0.024467] kernel: DMA32 zone: 873235 pages, LIFO batch:63
[ 0.032591] kernel: Normal zone: 51160 pages used for memmap
[ 0.032593] kernel: Normal zone: 3274240 pages, LIFO batch:63
[ 0.063445] kernel: Reserving Intel graphics memory at [mem 0xd7a00000-0xdf9fffff]
[ 0.063534] kernel: ACPI: PM-Timer IO Port: 0x408
[ 0.063537] kernel: ACPI: Local APIC address 0xfee00000
[ 0.063545] kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.063556] kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.063558] kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.063559] kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.063560] kernel: ACPI: IRQ0 used by override.
[ 0.063561] kernel: ACPI: IRQ9 used by override.
[ 0.063562] kernel: Using ACPI (MADT) for SMP configuration information
[ 0.063563] kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.063569] kernel: TSC deadline timer available
[ 0.063570] kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.063588] kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.063590] kernel: PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.063590] kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.063590] kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.063591] kernel: PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.063592] kernel: PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.063593] kernel: PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.063595] kernel: PM: hibernation: Registered nosave memory: [mem 0xd5dc6000-0xd63bbfff]
[ 0.063595] kernel: PM: hibernation: Registered nosave memory: [mem 0xd63bc000-0xd663bfff]
[ 0.063595] kernel: PM: hibernation: Registered nosave memory: [mem 0xd663c000-0xd6640fff]
[ 0.063596] kernel: PM: hibernation: Registered nosave memory: [mem 0xd6641000-0xd6683fff]
[ 0.063597] kernel: PM: hibernation: Registered nosave memory: [mem 0xd6dc5000-0xd6ff2fff]
[ 0.063598] kernel: PM: hibernation: Registered nosave memory: [mem 0xd7000000-0xdf9fffff]
[ 0.063599] kernel: PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.063599] kernel: PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.063599] kernel: PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.063600] kernel: PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.063600] kernel: PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.063601] kernel: PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.063601] kernel: PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.063601] kernel: PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.063602] kernel: PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.063602] kernel: PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.063603] kernel: PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.063603] kernel: PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.063605] kernel: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.063606] kernel: Booting paravirtualized kernel on bare hardware
[ 0.063608] kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.063615] kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.063864] kernel: percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288
[ 0.063869] kernel: pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152
[ 0.063870] kernel: pcpu-alloc: [0] 0 1 2 3
[ 0.063895] kernel: Built 1 zonelists, mobility grouping on. Total pages: 4086581
[ 0.063896] kernel: Policy zone: Normal
[ 0.063897] kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-38-generic root=UUID=1b61e384-a0fe-4667-b22f-3a1b86fd5193 ro quiet splash vt.handoff=7
[ 0.065081] kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.065638] kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.065681] kernel: mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.118582] kernel: Memory: 16170376K/16605884K available (14339K kernel code, 2563K rwdata, 5356K rodata, 2636K init, 4900K bss, 435508K reserved, 0K cma-reserved)
[ 0.118590] kernel: random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.118692] kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.118704] kernel: Kernel/User page tables isolation: enabled
[ 0.118720] kernel: ftrace: allocating 46188 entries in 181 pages
[ 0.132877] kernel: ftrace: allocated 181 pages with 5 groups
[ 0.132994] kernel: rcu: Hierarchical RCU implementation.
[ 0.132995] kernel: rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.132996] kernel: Trampoline variant of Tasks RCU enabled.
[ 0.132997] kernel: Rude variant of Tasks RCU enabled.
[ 0.132997] kernel: Tracing variant of Tasks RCU enabled.
[ 0.132998] kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.132998] kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.135944] kernel: NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.136182] kernel: vt handoff: transparent VT on vt#7
[ 0.136188] kernel: Console: colour dummy device 80x25
[ 0.136193] kernel: printk: console [tty0] enabled
[ 0.136210] kernel: ACPI: Core revision 20200528
[ 0.136301] kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.136315] kernel: APIC: Switch to symmetric I/O mode setup
[ 0.136717] kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.156315] kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f763b6683e, max_idle_ns: 440795254667 ns
[ 0.156320] kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.33 BogoMIPS (lpj=13170660)
[ 0.156322] kernel: pid_max: default: 32768 minimum: 301
[ 0.156345] kernel: LSM: Security Framework initializing
[ 0.156352] kernel: Yama: becoming mindful.
[ 0.156376] kernel: AppArmor: AppArmor initialized
[ 0.156436] kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.156476] kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.156717] kernel: mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.156725] kernel: process: using mwait in idle threads
[ 0.156727] kernel: Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.156727] kernel: Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.156730] kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.156731] kernel: Spectre V2 : Mitigation: Full generic retpoline
[ 0.156731] kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.156732] kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.156733] kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.156734] kernel: Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.156735] kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.156737] kernel: MDS: Mitigation: Clear CPU buffers
[ 0.156930] kernel: Freeing SMP alternatives memory: 40K
[ 0.158860] kernel: smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.158951] kernel: Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.158957] kernel: ... version: 3
[ 0.158958] kernel: ... bit width: 48
[ 0.158958] kernel: ... generic registers: 4
[ 0.158959] kernel: ... value mask: 0000ffffffffffff
[ 0.158959] kernel: ... max period: 00007fffffffffff
[ 0.158959] kernel: ... fixed-purpose events: 3
[ 0.158960] kernel: ... event mask: 000000070000000f
[ 0.158994] kernel: rcu: Hierarchical SRCU implementation.
[ 0.159716] kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.159762] kernel: smp: Bringing up secondary CPUs ...
[ 0.159845] kernel: x86: Booting SMP configuration:
[ 0.159846] kernel: .... node #0, CPUs: #1 #2
[ 0.162683] kernel: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.162683] kernel: #3
[ 0.164373] kernel: smp: Brought up 1 node, 4 CPUs
[ 0.164373] kernel: smpboot: Max logical packages: 1
[ 0.164373] kernel: smpboot: Total of 4 processors activated (26341.32 BogoMIPS)
[ 0.166009] kernel: devtmpfs: initialized
[ 0.166009] kernel: x86/mm: Memory block size: 128MB
[ 0.166009] kernel: PM: Registering ACPI NVS region [mem 0xd63bc000-0xd663bfff] (2621440 bytes)
[ 0.166009] kernel: PM: Registering ACPI NVS region [mem 0xd6641000-0xd6683fff] (274432 bytes)
[ 0.166009] kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.166009] kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.166009] kernel: pinctrl core: initialized pinctrl subsystem
[ 0.166009] kernel: PM: RTC time: 14:20:29, date: 2021-01-24
[ 0.166009] kernel: thermal_sys: Registered thermal governor 'fair_share'
[ 0.166009] kernel: thermal_sys: Registered thermal governor 'bang_bang'
[ 0.166009] kernel: thermal_sys: Registered thermal governor 'step_wise'
[ 0.166009] kernel: thermal_sys: Registered thermal governor 'user_space'
[ 0.166009] kernel: thermal_sys: Registered thermal governor 'power_allocator'
[ 0.166009] kernel: NET: Registered protocol family 16
[ 0.166009] kernel: DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.166009] kernel: DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.166009] kernel: DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.166009] kernel: audit: initializing netlink subsys (disabled)
[ 0.166009] kernel: audit: type=2000 audit(1611498029.028:1): state=initialized audit_enabled=0 res=1
[ 0.166009] kernel: EISA bus registered
[ 0.166009] kernel: cpuidle: using governor ladder
[ 0.166009] kernel: cpuidle: using governor menu
[ 0.166009] kernel: ACPI: bus type PCI registered
[ 0.166009] kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.166009] kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.166009] kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.166009] kernel: pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.166009] kernel: PCI: Using configuration type 1 for base access
[ 0.166009] kernel: core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.168330] kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.169268] kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.169268] kernel: ACPI: Added _OSI(Module Device)
[ 0.169268] kernel: ACPI: Added _OSI(Processor Device)
[ 0.169268] kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.169268] kernel: ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169268] kernel: ACPI: Added _OSI(Linux-Dell-Video)
[ 0.169268] kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.169268] kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.176325] kernel: ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.176325] kernel: ACPI: Dynamic OEM Table Load:
[ 0.176325] kernel: ACPI: SSDT 0xFFFF92A44D104000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.176325] kernel: ACPI: Dynamic OEM Table Load:
[ 0.176325] kernel: ACPI: SSDT 0xFFFF92A44D0FD800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.176325] kernel: ACPI: Dynamic OEM Table Load:
[ 0.176325] kernel: ACPI: SSDT 0xFFFF92A44CC6E600 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.176325] kernel: ACPI: Interpreter enabled
[ 0.176325] kernel: ACPI: (supports S0 S1 S3 S4 S5)
[ 0.176325] kernel: ACPI: Using IOAPIC for interrupt routing
[ 0.176325] kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.176325] kernel: ACPI: Enabled 14 GPEs in block 00 to 3F
[ 0.186845] kernel: ACPI: Power Resource [FN00] (off)
[ 0.186922] kernel: ACPI: Power Resource [FN01] (off)
[ 0.186994] kernel: ACPI: Power Resource [FN02] (off)
[ 0.187067] kernel: ACPI: Power Resource [FN03] (off)
[ 0.187139] kernel: ACPI: Power Resource [FN04] (off)
[ 0.187728] kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.187733] kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.188022] kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.188204] kernel: acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.188751] kernel: PCI host bridge to bus 0000:00
[ 0.188753] kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.188754] kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.188755] kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.188756] kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.188756] kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.188757] kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.188758] kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.188759] kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.188760] kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.188760] kernel: pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.188762] kernel: pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.188770] kernel: pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.188863] kernel: pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.188896] kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.188990] kernel: pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[ 0.188999] kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf4800000-0xf4bfffff 64bit]
[ 0.189004] kernel: pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.189008] kernel: pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.189138] kernel: pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.189161] kernel: pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.189229] kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.189320] kernel: pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.189344] kernel: pci 0000:00:16.0: reg 0x10: [mem 0xf7e1a000-0xf7e1a00f 64bit]
[ 0.189414] kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.189501] kernel: pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.189522] kernel: pci 0000:00:1a.0: reg 0x10: [mem 0xf7e18000-0xf7e183ff]
[ 0.189603] kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.189699] kernel: pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.189721] kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[ 0.189795] kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.189892] kernel: pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.190055] kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.190178] kernel: pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.190271] kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.190369] kernel: pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[ 0.190460] kernel: pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.190560] kernel: pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[ 0.190652] kernel: pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.190750] kernel: pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[ 0.190842] kernel: pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.196398] kernel: pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.196420] kernel: pci 0000:00:1d.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
[ 0.196500] kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.196593] kernel: pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[ 0.196780] kernel: pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.196797] kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.196805] kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.196812] kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.196819] kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.196826] kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.196833] kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xf7e16000-0xf7e167ff]
[ 0.196873] kernel: pci 0000:00:1f.2: PME# supported from D3hot
[ 0.196957] kernel: pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.196976] kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
[ 0.196995] kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.197115] kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.197181] kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.197185] kernel: pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.197189] kernel: pci 0000:00:1c.0: bridge window [mem 0xf7400000-0xf7dfffff]
[ 0.197197] kernel: pci 0000:00:1c.0: bridge window [mem 0xf2800000-0xf31fffff 64bit pref]
[ 0.197242] kernel: pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.197244] kernel: pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.197247] kernel: pci 0000:00:1c.4: bridge window [mem 0xf6a00000-0xf73fffff]
[ 0.197252] kernel: pci 0000:00:1c.4: bridge window [mem 0xf1e00000-0xf27fffff 64bit pref]
[ 0.197297] kernel: pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.197301] kernel: pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.197304] kernel: pci 0000:00:1c.5: bridge window [mem 0xf6000000-0xf69fffff]
[ 0.197309] kernel: pci 0000:00:1c.5: bridge window [mem 0xf1400000-0xf1dfffff 64bit pref]
[ 0.197371] kernel: pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.197405] kernel: pci 0000:05:00.0: reg 0x10: [io 0xa000-0xa0ff]
[ 0.197437] kernel: pci 0000:05:00.0: reg 0x18: [mem 0xf0a04000-0xf0a04fff 64bit pref]
[ 0.197458] kernel: pci 0000:05:00.0: reg 0x20: [mem 0xf0a00000-0xf0a03fff 64bit pref]
[ 0.197586] kernel: pci 0000:05:00.0: supports D1 D2
[ 0.197587] kernel: pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197733] kernel: pci 0000:00:1c.6: PCI bridge to [bus 05-0c]
[ 0.197736] kernel: pci 0000:00:1c.6: bridge window [io 0xa000-0xbfff]
[ 0.197740] kernel: pci 0000:00:1c.6: bridge window [mem 0xf5600000-0xf5ffffff]
[ 0.197745] kernel: pci 0000:00:1c.6: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
[ 0.197789] kernel: pci 0000:00:1c.7: PCI bridge to [bus 0d]
[ 0.197793] kernel: pci 0000:00:1c.7: bridge window [io 0x8000-0x9fff]
[ 0.197796] kernel: pci 0000:00:1c.7: bridge window [mem 0xf4c00000-0xf55fffff]
[ 0.197801] kernel: pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.198549] kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.198613] kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.198675] kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.198736] kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.198797] kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.198858] kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.198920] kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.198981] kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.199278] kernel: iommu: Default domain type: Translated
[ 0.199278] kernel: SCSI subsystem initialized
[ 0.199278] kernel: libata version 3.00 loaded.
[ 0.199278] kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.199278] kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.199278] kernel: pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.199278] kernel: vgaarb: loaded
[ 0.199278] kernel: ACPI: bus type USB registered
[ 0.199278] kernel: usbcore: registered new interface driver usbfs
[ 0.199278] kernel: usbcore: registered new interface driver hub
[ 0.199278] kernel: usbcore: registered new device driver usb
[ 0.199278] kernel: pps_core: LinuxPPS API ver. 1 registered
[ 0.199278] kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.199278] kernel: PTP clock support registered
[ 0.199278] kernel: EDAC MC: Ver: 3.0.0
[ 0.199278] kernel: NetLabel: Initializing
[ 0.199278] kernel: NetLabel: domain hash size = 128
[ 0.199278] kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.199278] kernel: NetLabel: unlabeled traffic allowed by default
[ 0.199278] kernel: PCI: Using ACPI for IRQ routing
[ 0.201531] kernel: PCI: pci_cache_line_size set to 64 bytes
[ 0.201578] kernel: e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.201579] kernel: e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.201580] kernel: e820: reserve RAM buffer [mem 0xd5dc6000-0xd7ffffff]
[ 0.201581] kernel: e820: reserve RAM buffer [mem 0xd6dc5000-0xd7ffffff]
[ 0.201582] kernel: e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[ 0.201582] kernel: e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
[ 0.201587] kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.201587] kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.202959] kernel: clocksource: Switched to clocksource tsc-early
[ 0.212443] kernel: VFS: Disk quotas dquot_6.6.0
[ 0.212461] kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.212563] kernel: AppArmor: AppArmor Filesystem Enabled
[ 0.212591] kernel: pnp: PnP ACPI init
[ 0.212719] kernel: system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.212725] kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.212825] kernel: system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.212826] kernel: system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.212827] kernel: system 00:01: [io 0xffff] has been reserved
[ 0.212829] kernel: system 00:01: [io 0xffff] has been reserved
[ 0.212830] kernel: system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.212831] kernel: system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.212832] kernel: system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.212833] kernel: system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.212837] kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212858] kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.212911] kernel: system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.212914] kernel: system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.212982] kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.213400] kernel: system 00:05: [io 0x0a00-0x0a1f] has been reserved
[ 0.213401] kernel: system 00:05: [io 0x0a20-0x0a27] has been reserved
[ 0.213402] kernel: system 00:05: [io 0x0a30-0x0a33] has been reserved
[ 0.213405] kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.213580] kernel: pnp 00:06: [dma 0 disabled]
[ 0.213615] kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.213665] kernel: system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.213668] kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.213920] kernel: system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.213921] kernel: system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.213922] kernel: system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.213923] kernel: system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.213924] kernel: system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.213925] kernel: system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.213926] kernel: system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.213927] kernel: system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.213928] kernel: system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.213929] kernel: system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.213930] kernel: system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.213933] kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.214115] kernel: system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[ 0.214116] kernel: system 00:09: [mem 0x40004000-0x40004fff] has been reserved
[ 0.214119] kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.214148] kernel: pnp: PnP ACPI: found 10 devices
[ 0.219823] kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.219877] kernel: NET: Registered protocol family 2
[ 0.220034] kernel: tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.220121] kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.220341] kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.220470] kernel: TCP: Hash tables configured (established 131072 bind 65536)
[ 0.220568] kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.220606] kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.220661] kernel: NET: Registered protocol family 1
[ 0.220666] kernel: NET: Registered protocol family 44
[ 0.220677] kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.220682] kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.220685] kernel: pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.220692] kernel: pci 0000:00:1c.0: bridge window [mem 0xf7400000-0xf7dfffff]
[ 0.220696] kernel: pci 0000:00:1c.0: bridge window [mem 0xf2800000-0xf31fffff 64bit pref]
[ 0.220704] kernel: pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.220706] kernel: pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.220711] kernel: pci 0000:00:1c.4: bridge window [mem 0xf6a00000-0xf73fffff]
[ 0.220714] kernel: pci 0000:00:1c.4: bridge window [mem 0xf1e00000-0xf27fffff 64bit pref]
[ 0.220720] kernel: pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.220722] kernel: pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.220727] kernel: pci 0000:00:1c.5: bridge window [mem 0xf6000000-0xf69fffff]
[ 0.220730] kernel: pci 0000:00:1c.5: bridge window [mem 0xf1400000-0xf1dfffff 64bit pref]
[ 0.220735] kernel: pci 0000:00:1c.6: PCI bridge to [bus 05-0c]
[ 0.220738] kernel: pci 0000:00:1c.6: bridge window [io 0xa000-0xbfff]
[ 0.220742] kernel: pci 0000:00:1c.6: bridge window [mem 0xf5600000-0xf5ffffff]
[ 0.220746] kernel: pci 0000:00:1c.6: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
[ 0.220751] kernel: pci 0000:00:1c.7: PCI bridge to [bus 0d]
[ 0.220754] kernel: pci 0000:00:1c.7: bridge window [io 0x8000-0x9fff]
[ 0.220758] kernel: pci 0000:00:1c.7: bridge window [mem 0xf4c00000-0xf55fffff]
[ 0.220762] kernel: pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.220768] kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.220769] kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.220770] kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.220771] kernel: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.220772] kernel: pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.220772] kernel: pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.220773] kernel: pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.220774] kernel: pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.220775] kernel: pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.220776] kernel: pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[ 0.220777] kernel: pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.220778] kernel: pci_bus 0000:02: resource 1 [mem 0xf7400000-0xf7dfffff]
[ 0.220779] kernel: pci_bus 0000:02: resource 2 [mem 0xf2800000-0xf31fffff 64bit pref]
[ 0.220780] kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.220781] kernel: pci_bus 0000:03: resource 1 [mem 0xf6a00000-0xf73fffff]
[ 0.220782] kernel: pci_bus 0000:03: resource 2 [mem 0xf1e00000-0xf27fffff 64bit pref]
[ 0.220783] kernel: pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.220783] kernel: pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf69fffff]
[ 0.220784] kernel: pci_bus 0000:04: resource 2 [mem 0xf1400000-0xf1dfffff 64bit pref]
[ 0.220785] kernel: pci_bus 0000:05: resource 0 [io 0xa000-0xbfff]
[ 0.220786] kernel: pci_bus 0000:05: resource 1 [mem 0xf5600000-0xf5ffffff]
[ 0.220787] kernel: pci_bus 0000:05: resource 2 [mem 0xf0a00000-0xf13fffff 64bit pref]
[ 0.220788] kernel: pci_bus 0000:0d: resource 0 [io 0x8000-0x9fff]
[ 0.220788] kernel: pci_bus 0000:0d: resource 1 [mem 0xf4c00000-0xf55fffff]
[ 0.220789] kernel: pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.220902] kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.248429] kernel: pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 24492 usecs
[ 0.272422] kernel: pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23409 usecs
[ 0.272436] kernel: pci 0000:05:00.0: CLS mismatch (64 != 32), using 64 bytes
[ 0.272480] kernel: Trying to unpack rootfs image as initramfs...
[ 0.384233] kernel: Freeing initrd memory: 50836K
[ 0.384249] kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.384250] kernel: software IO TLB: mapped [mem 0xd1dc6000-0xd5dc6000] (64MB)
[ 0.384513] kernel: check: Scanning for low memory corruption every 60 seconds
[ 0.384873] kernel: Initialise system trusted keyrings
[ 0.384882] kernel: Key type blacklist registered
[ 0.384912] kernel: workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.385906] kernel: zbud: loaded
[ 0.386107] kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.386231] kernel: fuse: init (API version 7.31)
[ 0.386345] kernel: integrity: Platform Keyring initialized
[ 0.395062] kernel: Key type asymmetric registered
[ 0.395063] kernel: Asymmetric key parser 'x509' registered
[ 0.395070] kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.395106] kernel: io scheduler mq-deadline registered
[ 0.396089] kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.396129] kernel: vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.396129] kernel: vesafb: scrolling: redraw
[ 0.396130] kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.396155] kernel: vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k
[ 0.396188] kernel: fbcon: Deferring console take-over
[ 0.396189] kernel: fb0: VESA VGA frame buffer device
[ 0.396199] kernel: intel_idle: MWAIT substates: 0x1120
[ 0.396200] kernel: intel_idle: v0.5.1 model 0x3A
[ 0.396307] kernel: intel_idle: Local APIC timer is reliable in all C-states
[ 0.396416] kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.396435] kernel: ACPI: Power Button [PWRB]
[ 0.396461] kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.396485] kernel: ACPI: Power Button [PWRF]
[ 0.397135] kernel: thermal LNXTHERM:00: registered as thermal_zone0
[ 0.397136] kernel: ACPI: Thermal Zone [TZ00] (28 C)
[ 0.397392] kernel: thermal LNXTHERM:01: registered as thermal_zone1
[ 0.397393] kernel: ACPI: Thermal Zone [TZ01] (30 C)
[ 0.397516] kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.417989] kernel: 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.419771] kernel: Linux agpgart interface v0.103
[ 0.421221] kernel: loop: module loaded
[ 0.421463] kernel: libphy: Fixed MDIO Bus: probed
[ 0.421464] kernel: tun: Universal TUN/TAP device driver, 1.6
[ 0.421483] kernel: PPP generic driver version 2.4.2
[ 0.421517] kernel: VFIO - User Level meta-driver version: 0.3
[ 0.421586] kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.421588] kernel: ehci-pci: EHCI PCI platform driver
[ 0.421737] kernel: ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.421742] kernel: ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.421753] kernel: ehci-pci 0000:00:1a.0: debug port 2
[ 0.425646] kernel: ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.425658] kernel: ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e18000
[ 0.440350] kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.440411] kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.440412] kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440413] kernel: usb usb1: Product: EHCI Host Controller
[ 0.440414] kernel: usb usb1: Manufacturer: Linux 5.8.0-38-generic ehci_hcd
[ 0.440415] kernel: usb usb1: SerialNumber: 0000:00:1a.0
[ 0.440556] kernel: hub 1-0:1.0: USB hub found
[ 0.440564] kernel: hub 1-0:1.0: 2 ports detected
[ 0.440791] kernel: ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.440795] kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.440804] kernel: ehci-pci 0000:00:1d.0: debug port 2
[ 0.444720] kernel: ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.444729] kernel: ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e17000
[ 0.460349] kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.460403] kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.460404] kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.460405] kernel: usb usb2: Product: EHCI Host Controller
[ 0.460406] kernel: usb usb2: Manufacturer: Linux 5.8.0-38-generic ehci_hcd
[ 0.460407] kernel: usb usb2: SerialNumber: 0000:00:1d.0
[ 0.460600] kernel: hub 2-0:1.0: USB hub found
[ 0.460606] kernel: hub 2-0:1.0: 2 ports detected
[ 0.460727] kernel: ehci-platform: EHCI generic platform driver
[ 0.460736] kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.460739] kernel: ohci-pci: OHCI PCI platform driver
[ 0.460745] kernel: ohci-platform: OHCI generic platform driver
[ 0.460749] kernel: uhci_hcd: USB Universal Host Controller Interface driver
[ 0.460783] kernel: i8042: PNP: No PS/2 controller found.
[ 0.460961] kernel: mousedev: PS/2 mouse device common for all mice
[ 0.461318] kernel: rtc_cmos 00:02: RTC can wake from S4
[ 0.461422] kernel: rtc rtc0: invalid alarm value: 2021-01-24T14:65:30
[ 0.461499] kernel: rtc_cmos 00:02: registered as rtc0
[ 0.461548] kernel: rtc_cmos 00:02: setting system clock to 2021-01-24T14:20:30 UTC (1611498030)
[ 0.461562] kernel: rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.461567] kernel: i2c /dev entries driver
[ 0.461606] kernel: device-mapper: uevent: version 1.0.3
[ 0.461652] kernel: device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 0.461669] kernel: platform eisa.0: Probing EISA bus 0
[ 0.461670] kernel: platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.461671] kernel: platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.461672] kernel: platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.461673] kernel: platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.461673] kernel: platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.461674] kernel: platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.461675] kernel: platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.461676] kernel: platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.461676] kernel: platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.461677] kernel: platform eisa.0: EISA: Detected 0 cards
[ 0.461682] kernel: intel_pstate: Intel P-state driver initializing
[ 0.461858] kernel: ledtrig-cpu: registered to indicate activity on CPUs
[ 0.461970] kernel: drop_monitor: Initializing network drop monitor service
[ 0.462218] kernel: NET: Registered protocol family 10
[ 0.468402] kernel: Segment Routing with IPv6
[ 0.468463] kernel: NET: Registered protocol family 17
[ 0.468525] kernel: Key type dns_resolver registered
[ 0.468940] kernel: microcode: sig=0x306a9, pf=0x2, revision=0x21
[ 0.469014] kernel: microcode: Microcode Update Driver: v2.2.
[ 0.469019] kernel: IPI shorthand broadcast: enabled
[ 0.469025] kernel: sched_clock: Marking stable (468823095, 171613)->(1043750107, -574755399)
[ 0.469112] kernel: registered taskstats version 1
[ 0.469125] kernel: Loading compiled-in X.509 certificates
[ 0.470437] kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 7d18ea4c3a80be19c9c32dd98d09ef9f308416aa'
[ 0.470482] kernel: zswap: loaded using pool lzo/zbud
[ 0.470620] kernel: Key type ._fscrypt registered
[ 0.470621] kernel: Key type .fscrypt registered
[ 0.470622] kernel: Key type fscrypt-provisioning registered
[ 0.474217] kernel: Key type encrypted registered
[ 0.474234] kernel: AppArmor: AppArmor sha1 policy hashing enabled
[ 0.474240] kernel: ima: No TPM chip found, activating TPM-bypass!
[ 0.474245] kernel: ima: Allocated hash algorithm: sha1
[ 0.474253] kernel: ima: No architecture policies found
[ 0.474261] kernel: evm: Initialising EVM extended attributes:
[ 0.474262] kernel: evm: security.selinux
[ 0.474262] kernel: evm: security.SMACK64
[ 0.474263] kernel: evm: security.SMACK64EXEC
[ 0.474263] kernel: evm: security.SMACK64TRANSMUTE
[ 0.474263] kernel: evm: security.SMACK64MMAP
[ 0.474264] kernel: evm: security.apparmor
[ 0.474264] kernel: evm: security.ima
[ 0.474265] kernel: evm: security.capability
[ 0.474266] kernel: evm: HMAC attrs: 0x1
[ 0.474667] kernel: PM: Magic number: 5:528:334
[ 0.474694] kernel: tty tty55: hash matches
[ 0.474850] kernel: RAS: Correctable Errors collector initialized.
[ 0.476155] kernel: Freeing unused decrypted memory: 2040K
[ 0.476786] kernel: Freeing unused kernel image (initmem) memory: 2636K
[ 0.504382] kernel: Write protecting the kernel read-only data: 22528k
[ 0.505140] kernel: Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 0.505393] kernel: Freeing unused kernel image (rodata/data gap) memory: 788K
[ 0.602244] kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.602246] kernel: x86/mm: Checking user space page tables
[ 0.695420] kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.695441] kernel: Run /init as init process
[ 0.695444] kernel: with arguments:
[ 0.695445] kernel: /init
[ 0.695447] kernel: splash
[ 0.695448] kernel: with environment:
[ 0.695449] kernel: HOME=/
[ 0.695451] kernel: TERM=linux
[ 0.695452] kernel: BOOT_IMAGE=/boot/vmlinuz-5.8.0-38-generic
[ 0.776343] kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.796341] kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.826538] kernel: ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200528/utaddress-204)
[ 0.826546] kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.826550] kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[ 0.826554] kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.826555] kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[ 0.826559] kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.826561] kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[ 0.826564] kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.826565] kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.827774] kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.828898] kernel: i2c i2c-0: 3/4 memory slots populated (from DMI)
[ 0.829128] kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.829136] kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.830287] kernel: xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 0.830294] kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.831412] kernel: i2c i2c-0: Successfully instantiated SPD at 0x51
[ 0.831435] kernel: ahci 0000:00:1f.2: version 3.0
[ 0.831921] kernel: i2c i2c-0: Successfully instantiated SPD at 0x52
[ 0.832605] kernel: i2c i2c-0: Successfully instantiated SPD at 0x53
[ 0.833028] kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.833030] kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.833031] kernel: usb usb3: Product: xHCI Host Controller
[ 0.833033] kernel: usb usb3: Manufacturer: Linux 5.8.0-38-generic xhci-hcd
[ 0.833034] kernel: usb usb3: SerialNumber: 0000:00:14.0
[ 0.833184] kernel: hub 3-0:1.0: USB hub found
[ 0.833198] kernel: hub 3-0:1.0: 4 ports detected
[ 0.834360] kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.834366] kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.834370] kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.835304] kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 0.835306] kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.835307] kernel: usb usb4: Product: xHCI Host Controller
[ 0.835308] kernel: usb usb4: Manufacturer: Linux 5.8.0-38-generic xhci-hcd
[ 0.835309] kernel: usb usb4: SerialNumber: 0000:00:14.0
[ 0.835424] kernel: hub 4-0:1.0: USB hub found
[ 0.835439] kernel: hub 4-0:1.0: 4 ports detected
[ 0.844544] kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x4 impl SATA mode
[ 0.844548] kernel: ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.845105] kernel: scsi host0: ahci
[ 0.845268] kernel: scsi host1: ahci
[ 0.848758] kernel: libphy: r8169: probed
[ 0.850527] kernel: scsi host2: ahci
[ 0.850949] kernel: scsi host3: ahci
[ 0.851057] kernel: scsi host4: ahci
[ 0.851149] kernel: scsi host5: ahci
[ 0.851203] kernel: ata1: DUMMY
[ 0.851204] kernel: ata2: DUMMY
[ 0.851208] kernel: ata3: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16200 irq 32
[ 0.851209] kernel: ata4: DUMMY
[ 0.851209] kernel: ata5: DUMMY
[ 0.851210] kernel: ata6: DUMMY
[ 0.856650] kernel: r8169 0000:05:00.0 eth0: RTL8168evl/8111evl, 80:ee:73:41:9a:bb, XID 2c9, IRQ 31
[ 0.856653] kernel: r8169 0000:05:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 0.866194] kernel: r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 0.936715] kernel: usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.936719] kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.937148] kernel: hub 1-1:1.0: USB hub found
[ 0.937301] kernel: hub 1-1:1.0: 6 ports detected
[ 0.952682] kernel: usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.952686] kernel: usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.953147] kernel: hub 2-1:1.0: USB hub found
[ 0.953336] kernel: hub 2-1:1.0: 8 ports detected
[ 1.168381] kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.169942] kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.169958] kernel: No Local Variables are initialized for Method [_GTF]
[ 1.169960] kernel: No Arguments are initialized for method [_GTF]
[ 1.169963] kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.170017] kernel: ata3.00: supports DRM functions and may not be fully accessible
[ 1.170628] kernel: ata3.00: NCQ Send/Recv Log not supported
[ 1.170630] kernel: ata3.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[ 1.170632] kernel: ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.171880] kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.171894] kernel: No Local Variables are initialized for Method [_GTF]
[ 1.171896] kernel: No Arguments are initialized for method [_GTF]
[ 1.171898] kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.171950] kernel: ata3.00: supports DRM functions and may not be fully accessible
[ 1.172345] kernel: ata3.00: NCQ Send/Recv Log not supported
[ 1.172388] kernel: usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.173173] kernel: ata3.00: configured for UDMA/133
[ 1.173319] kernel: scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.173619] kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.173658] kernel: sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.173679] kernel: sd 2:0:0:0: [sda] Write Protect is off
[ 1.173683] kernel: sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.173718] kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.189205] kernel: sda: sda1 sda2 < sda5 sda6 >
[ 1.190681] kernel: sd 2:0:0:0: [sda] supports TCG Opal
[ 1.190684] kernel: sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.194492] kernel: usb 4-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 1.194497] kernel: usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.194499] kernel: usb 4-3: Product: Sabrent Disk Device
[ 1.194501] kernel: usb 4-3: Manufacturer:
[ 1.194503] kernel: usb 4-3: SerialNumber: 00000000000000000000
[ 1.201018] kernel: usbcore: registered new interface driver usb-storage
[ 1.204025] kernel: scsi host6: uas
[ 1.204134] kernel: usbcore: registered new interface driver uas
[ 1.205350] kernel: scsi 6:0:0:0: Direct-Access Sabrent Disk Dev 0 PQ: 0 ANSI: 6
[ 1.210390] kernel: scsi 6:0:0:1: Direct-Access Sabrent Disk Dev 0 PQ: 0 ANSI: 6
[ 1.213810] kernel: random: fast init done
[ 1.216926] kernel: sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1.217075] kernel: sd 6:0:0:1: Attached scsi generic sg2 type 0
[ 1.219212] kernel: sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.219214] kernel: sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 1.220343] kernel: usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.220735] kernel: sd 6:0:0:0: [sdb] Write Protect is off
[ 1.220737] kernel: sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1.222158] kernel: sd 6:0:0:1: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.222269] kernel: sd 6:0:0:1: [sdc] Write Protect is off
[ 1.222271] kernel: sd 6:0:0:1: [sdc] Mode Sense: 43 00 00 00
[ 1.222348] kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.222786] kernel: sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1.236419] kernel: usb 2-1.7: new high-speed USB device number 3 using ehci-pci
[ 1.261396] kernel: sd 6:0:0:0: [sdb] Attached SCSI disk
[ 1.266707] kernel: fbcon: Taking over console
[ 1.266773] kernel: Console: switching to colour frame buffer device 240x67
[ 1.272413] kernel: EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 1.340821] kernel: usb 1-1.3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21
[ 1.340824] kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.340826] kernel: usb 1-1.3: Product: 4-Port USB 2.0 Hub
[ 1.340828] kernel: usb 1-1.3: Manufacturer: Generic
[ 1.341492] kernel: hub 1-1.3:1.0: USB hub found
[ 1.342309] kernel: hub 1-1.3:1.0: 4 ports detected
[ 1.351049] kernel: usb 2-1.7: New USB device found, idVendor=0e8d, idProduct=1806, bcdDevice= 0.00
[ 1.351050] kernel: usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.351051] kernel: usb 2-1.7: Product: MT1806
[ 1.351052] kernel: usb 2-1.7: Manufacturer: MediaTek Inc
[ 1.351052] kernel: usb 2-1.7: SerialNumber: R90S6GAC90022D
[ 1.354232] kernel: usb-storage 2-1.7:1.0: USB Mass Storage device detected
[ 1.354366] kernel: scsi host7: usb-storage 2-1.7:1.0
[ 1.384348] kernel: tsc: Refined TSC clocksource calibration: 3292.521 MHz
[ 1.384359] kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b3911c3, max_idle_ns: 440795347484 ns
[ 1.384409] kernel: clocksource: Switched to clocksource tsc
[ 1.403011] systemd[1]: Inserted module 'autofs4'
[ 1.417190] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1.436580] systemd[1]: Detected architecture x86-64.
[ 1.457913] systemd[1]: Set hostname to <ordi>.
[ 1.546569] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 1.562639] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 1.615201] systemd[1]: Created slice system-modprobe.slice.
[ 1.615459] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.615648] systemd[1]: Created slice User and Session Slice.
[ 1.615715] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.615905] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.615952] systemd[1]: Reached target User and Group Name Lookups.
[ 1.615969] systemd[1]: Reached target Remote File Systems.
[ 1.615979] systemd[1]: Reached target Slices.
[ 1.616809] systemd[1]: Listening on Syslog Socket.
[ 1.616903] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 1.616961] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 1.617146] systemd[1]: Listening on Journal Audit Socket.
[ 1.617232] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.617337] systemd[1]: Listening on Journal Socket.
[ 1.617438] systemd[1]: Listening on udev Control Socket.
[ 1.617507] systemd[1]: Listening on udev Kernel Socket.
[ 1.618416] systemd[1]: Mounting Huge Pages File System...
[ 1.619432] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.621247] systemd[1]: Mounting Kernel Debug File System...
[ 1.622612] systemd[1]: Mounting Kernel Trace File System...
[ 1.624073] systemd[1]: Starting Journal Service...
[ 1.625165] systemd[1]: Starting Set the console keyboard layout...
[ 1.626804] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 1.628334] systemd[1]: Starting Load Kernel Module drm...
[ 1.631427] systemd[1]: Started Nameserver information manager.
[ 1.631601] systemd[1]: Reached target Network (Pre).
[ 1.632659] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 1.632715] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 1.635754] systemd[1]: Starting Load Kernel Modules...
[ 1.636351] kernel: usb 1-1.3.1: new low-speed USB device number 4 using ehci-pci
[ 1.637170] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.638704] systemd[1]: Starting udev Coldplug all Devices...
[ 1.645103] systemd[1]: Starting Uncomplicated firewall...
[ 1.651269] kernel: EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 1.654235] systemd[1]: Mounted Huge Pages File System.
[ 1.654397] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.654529] systemd[1]: Mounted Kernel Debug File System.
[ 1.654663] systemd[1]: Mounted Kernel Trace File System.
[ 1.655228] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 1.655538] systemd[1]: modprobe@drm.service: Succeeded.
[ 1.655906] systemd[1]: Finished Load Kernel Module drm.
[ 1.657064] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 1.657642] systemd[1]: Finished Uncomplicated firewall.
[ 1.658869] systemd[1]: Activating swap /swapfile...
[ 1.659210] kernel: lp: driver loaded but no devices found
[ 1.660008] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 1.660092] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 1.661245] systemd[1]: Starting Load/Save Random Seed...
[ 1.662483] systemd[1]: Starting Create System Users...
[ 1.669936] kernel: ppdev: user-space parallel port driver
[ 1.675551] systemd[1]: Finished Load Kernel Modules.
[ 1.676992] systemd[1]: Mounting FUSE Control File System...
[ 1.678323] systemd[1]: Mounting Kernel Configuration File System...
[ 1.679968] systemd[1]: Starting Apply Kernel Variables...
[ 1.681162] kernel: Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 1.682318] systemd[1]: Activated swap /swapfile.
[ 1.684403] systemd[1]: Mounted FUSE Control File System.
[ 1.685143] systemd[1]: Finished Load/Save Random Seed.
[ 1.686998] systemd[1]: Finished Create System Users.
[ 1.687263] systemd[1]: Reached target Swap.
[ 1.688648] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.690304] systemd[1]: Mounted Kernel Configuration File System.
[ 1.697568] systemd[1]: Finished Apply Kernel Variables.
[ 1.704923] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 1.706254] systemd[1]: Starting udev Kernel Device Manager...
[ 1.753487] systemd[1]: Finished Set the console keyboard layout.
[ 1.753707] systemd[1]: Reached target Local File Systems (Pre).
[ 1.755816] kernel: usb 1-1.3.1: New USB device found, idVendor=1a2c, idProduct=0c21, bcdDevice= 1.10
[ 1.755818] kernel: usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.755819] kernel: usb 1-1.3.1: Product: USB Keyboard
[ 1.755821] kernel: usb 1-1.3.1: Manufacturer: USB
[ 1.757024] systemd[1]: Mounting Mount unit for chromium, revision 1444...
[ 1.759580] systemd[1]: Mounting Mount unit for chromium, revision 1461...
[ 1.762295] systemd[1]: Mounting Mount unit for clementine, revision 1062...
[ 1.763940] systemd[1]: Mounting Mount unit for clementine, revision 1074...
[ 1.766973] systemd[1]: Mounting Mount unit for core, revision 10577...
[ 1.768641] systemd[1]: Mounting Mount unit for core, revision 10583...
[ 1.771540] systemd[1]: Mounting Mount unit for core18, revision 1932...
[ 1.773447] systemd[1]: Mounting Mount unit for core18, revision 1944...
[ 1.775299] systemd[1]: Mounting Mount unit for core20, revision 875...
[ 1.777310] systemd[1]: Mounting Mount unit for core20, revision 904...
[ 1.780558] systemd[1]: Mounting Mount unit for filezilla, revision 17...
[ 1.782071] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 128...
[ 1.787166] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 145...
[ 1.788865] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 60...
[ 1.790735] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 66...
[ 1.793878] systemd[1]: Mounting Mount unit for gnome-calendar, revision 132...
[ 1.796562] systemd[1]: Mounting Mount unit for gtk2-common-themes, revision 13...
[ 1.798093] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1513...
[ 1.799638] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1514...
[ 1.801926] systemd[1]: Mounting Mount unit for kde-frameworks-5-qt-5-14-core18, revision 4...
[ 1.803580] systemd[1]: Mounting Mount unit for okular, revision 98...
[ 1.805215] systemd[1]: Mounting Mount unit for pinta-james-carroll, revision 6...
[ 1.806767] systemd[1]: Mounting Mount unit for pinta-james-carroll, revision 8...
[ 1.808704] systemd[1]: Mounting Mount unit for snap-store, revision 498...
[ 1.810282] systemd[1]: Mounting Mount unit for snap-store, revision 518...
[ 1.813229] systemd[1]: Mounting Mount unit for snapd, revision 10492...
[ 1.816416] systemd[1]: Mounting Mount unit for snapd, revision 10707...
[ 1.824459] systemd[1]: Mounting Mount unit for spotify, revision 42...
[ 1.826371] systemd[1]: Mounting Mount unit for spotify, revision 43...
[ 1.830480] systemd[1]: Mounting Mount unit for vlc, revision 1700...
[ 1.832052] systemd[1]: Mounting Mount unit for vlc, revision 2103...
[ 1.836346] kernel: usb 1-1.3.2: new low-speed USB device number 5 using ehci-pci
[ 1.839514] systemd[1]: Mounting Mount unit for xmind, revision 8...
[ 1.846346] systemd[1]: Mounting Mount unit for xmind, revision 9...
[ 1.849440] systemd[1]: Started Journal Service.
[ 1.949032] kernel: usb 1-1.3.2: New USB device found, idVendor=1bcf, idProduct=0053, bcdDevice= 0.72
[ 1.949035] kernel: usb 1-1.3.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.949037] kernel: usb 1-1.3.2: Product: USB Optical Mouse
[ 2.022782] kernel: EDAC ie31200: No ECC support
[ 2.117451] kernel: hid: raw HID events driver (C) Jiri Kosina
[ 2.134729] kernel: usbcore: registered new interface driver usbhid
[ 2.134731] kernel: usbhid: USB HID core driver
[ 2.176738] kernel: at24 0-0051: supply vcc not found, using dummy regulator
[ 2.180829] kernel: at24 0-0051: 256 byte spd EEPROM, read-only
[ 2.180880] kernel: at24 0-0052: supply vcc not found, using dummy regulator
[ 2.181695] kernel: at24 0-0052: 256 byte spd EEPROM, read-only
[ 2.181724] kernel: at24 0-0053: supply vcc not found, using dummy regulator
[ 2.186914] kernel: at24 0-0053: 256 byte spd EEPROM, read-only
[ 2.243206] kernel: RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 2.243208] kernel: RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 2.243209] kernel: RAPL PMU: hw unit of domain package 2^-16 Joules
[ 2.243210] kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 2.247128] kernel: cryptd: max_cpu_qlen set to 1000
[ 2.249582] kernel: checking generic (e0000000 7f0000) vs hw (f4800000 400000)
[ 2.249584] kernel: checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 2.249585] kernel: fb0: switching to inteldrmfb from VESA VGA
[ 2.249775] kernel: Console: switching to colour dummy device 80x25
[ 2.249831] kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.255812] kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.257646] kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.284467] kernel: [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
[ 2.290399] kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.292146] kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 2.420476] kernel: scsi 7:0:0:0: CD-ROM TSSTcorp CDDVDW SE-208DB TS00 PQ: 0 ANSI: 0
[ 2.429675] kernel: sr 7:0:0:0: Power-on or device reset occurred
[ 2.446289] kernel: sr 7:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.446292] kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.469312] kernel: sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 2.469427] kernel: sr 7:0:0:0: Attached scsi generic sg3 type 5
[ 2.476847] kernel: input: USB USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/0003:1A2C:0C21.0001/input/input3
[ 2.532667] kernel: intel_rapl_common: Found RAPL domain package
[ 2.532670] kernel: intel_rapl_common: Found RAPL domain core
[ 2.532670] kernel: intel_rapl_common: Found RAPL domain uncore
[ 2.534732] kernel: snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.534848] kernel: fbcon: i915drmfb (fb0) is primary device
[ 2.534915] kernel: Console: switching to colour frame buffer device 240x67
[ 2.534951] kernel: i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.536639] kernel: hid-generic 0003:1A2C:0C21.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:1a.0-1.3.1/input0
[ 2.536913] kernel: input: USB USB Keyboard Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:1A2C:0C21.0002/input/input4
[ 2.537023] kernel: input: USB USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:1A2C:0C21.0002/input/input5
[ 2.558478] kernel: snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 2.558480] kernel: snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.558481] kernel: snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.558482] kernel: snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 2.558482] kernel: snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 2.558483] kernel: snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 2.558484] kernel: snd_hda_codec_realtek hdaudioC0D2: Mic=0x19
[ 2.558485] kernel: snd_hda_codec_realtek hdaudioC0D2: Line=0x18
[ 2.580689] kernel: input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.596934] kernel: input: USB USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:1A2C:0C21.0002/input/input6
[ 2.597378] kernel: input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.597443] kernel: input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.597510] kernel: input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.597571] kernel: input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.597627] kernel: input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.597692] kernel: input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.597773] kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 2.597837] kernel: hid-generic 0003:1A2C:0C21.0002: input,hidraw1: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:00:1a.0-1.3.1/input1
[ 2.598371] kernel: input: USB Optical Mouse Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/0003:1BCF:0053.0003/input/input15
[ 2.662104] kernel: input: USB Optical Mouse Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/0003:1BCF:0053.0003/input/input16
[ 2.662224] kernel: input: USB Optical Mouse Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/0003:1BCF:0053.0003/input/input17
[ 2.662308] kernel: hid-generic 0003:1BCF:0053.0003: input,hidraw2: USB HID v1.10 Keyboard [USB Optical Mouse ] on usb-0000:00:1a.0-1.3.2/input0
[ 3.314300] kernel: audit: type=1400 audit(1611498033.346:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=608 comm="apparmor_parser"
[ 3.319903] kernel: audit: type=1400 audit(1611498033.350:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=609 comm="apparmor_parser"
[ 3.323554] kernel: audit: type=1400 audit(1611498033.354:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
[ 3.323559] kernel: audit: type=1400 audit(1611498033.354:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=611 comm="apparmor_parser"
[ 3.323562] kernel: audit: type=1400 audit(1611498033.354:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
[ 3.323564] kernel: audit: type=1400 audit(1611498033.354:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=611 comm="apparmor_parser"
[ 3.323711] kernel: audit: type=1400 audit(1611498033.354:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=605 comm="apparmor_parser"
[ 3.323714] kernel: audit: type=1400 audit(1611498033.354:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=605 comm="apparmor_parser"
[ 3.323718] kernel: audit: type=1400 audit(1611498033.354:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=605 comm="apparmor_parser"
[ 3.659745] kernel: random: avahi-daemon: uninitialized urandom read (4 bytes read)
[ 3.661041] kernel: random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 3.796538] kernel: zram: Added device: zram0
[ 3.796665] kernel: zram: Added device: zram1
[ 3.796771] kernel: zram: Added device: zram2
[ 3.797061] kernel: zram: Added device: zram3
[ 3.826906] kernel: zram0: detected capacity change from 0 to 2077282304
[ 3.848439] kernel: Adding 2028592k swap on /dev/zram0. Priority:5 extents:1 across:2028592k SSFS
[ 3.850259] kernel: zram1: detected capacity change from 0 to 2077282304
[ 3.868956] kernel: random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 3.876380] kernel: Adding 2028592k swap on /dev/zram1. Priority:5 extents:1 across:2028592k SSFS
[ 3.878079] kernel: zram2: detected capacity change from 0 to 2077282304
[ 3.905699] kernel: Adding 2028592k swap on /dev/zram2. Priority:5 extents:1 across:2028592k SSFS
[ 3.907584] kernel: zram3: detected capacity change from 0 to 2077282304
[ 3.940453] kernel: Adding 2028592k swap on /dev/zram3. Priority:5 extents:1 across:2028592k SSFS
[ 4.274248] kernel: RTL8211E Gigabit Ethernet r8169-500:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE)
[ 4.531997] kernel: r8169 0000:05:00.0 enp5s0: Link is Down
[ 6.197126] kernel: random: crng init done
[ 6.197128] kernel: random: 7 urandom warning(s) missed due to ratelimiting
[ 7.844467] kernel: r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 7.844481] kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes readyMa config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#8 Le 27/01/2021, à 12:39
- jpoc
Re : blocage ouverture session et error loading operating system
QtWebEngineProc
MellowPlayer
un peu gourmand mais ça explique pas
il semblerait qu'il y est un souci avec Sata 3
verifier le branchement (cordon) Disque SSD
Hors ligne
#9 Le 27/01/2021, à 14:19
- herveD
Re : blocage ouverture session et error loading operating system
Salut
Si j'ai bien vu Sata 3 est le disque système (interne)
J'ai donc arrêté l'ordi et vérifié cette connexion ainsi que toutes les autres. A priori ils étaient tout bien connecté .
En conclusion à priori avec les tests, les disques durs (qui ont le taux de panne le plus fréquent) ne seraient pas en cause?
Ce qui m’inquiète c'est que j'ai l'impression qu'il y a qq chose qui s’aggrave et pourraient me bloquer pendant x jours
Par exemple, je n’éteins plus l'ordi et j'ai constaté un moment que Chromuim n'accédait plus à aucunes urls (alors que mon navigateur principal Firefox n'avait pas ce problème).
De même avec Thunderbird qui perd la configuration de l'affichage de certains dossiers (déjà constaté avant mais impression plus fréquent !).0
Etrange sans parler de la lenteur d'accès au système de fichiers.
Je ne bidouille pas l’ordinateur mais les dernières opérations (dont je me souviens) c'est l'ajout de ram et de l'application MellowPlayer (pour écoute deezer) il y a qq mois.
Cela m'étonnerait que cela soit la carte vidéo car il me semble que j'aurai d'autres effets visuels !?
Moins probable que les disques durs, je me demande comment tester l'alimentation ou la ram?
Bon l'ordi a environ 8 ans mais est-ce la raison ?
Comme je lai dis au début les problèmes arrivaient de plus en plus fréquemment :
blocage ouverture de session puis difficulté de rebooter Ubuntu
Le tout ayant une certaine corrélation? après une maj d'ubuntu qui se serait mal passée ? est-ce que les tests précédents excluent un pb de ce genre ?
Ma config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#10 Le 27/01/2021, à 20:26
- jpoc
Re : blocage ouverture session et error loading operating system
il semblerait qu'il y ait un bug entre le controleur carte mere et le disque ata3 Samsung
Bug 203475 - Samsung 860 EVO queued TRIM issues
si le probleme vient de là
il faut désactiver NCQ dans le kernel
- voir aussi si BIOS est à jour
- on peut essayer le noyau plus ancien avant l'actuel noyau si ça fonctionnait bien
- essayer de passer le parametre
libata.force=noncq au noyau actuel
- on peut aussi changer de disque par une autre marque que Samsung ..... 25€
Hors ligne
#11 Le 27/01/2021, à 22:08
- herveD
Re : blocage ouverture session et error loading operating system
Merci pour le suivi
Peut-être effectivement une bonne piste!
Bon je ne vais certainement pas revenir en arrière pour le noyau; Je pense que ce n'est pas tenable.
Effectivement le bios date de 2013, il faudrait que je retrouve s'ils ont fait une maj ?
Un peu frileux de désactiver NCQ dans le kernel, d'abords parce que je ne sais pas ce que sais et ce que cela implique à moyen terme
Idem qu'est-ce que fait libata.force=noncq ? risques ?
La meilleure solution si c'est très probable que cela vienne du bug entre le contrôleur carte mere et le disque ata3 Samsung, c'est qu'effectivement j'achète un autre disque dur de 120 ou 250 go pour le système, justement pendant les soldes!
Juste être sûr qu'il n'y a que Samsung qui a ce problème ?
Ubuntu ne corrigera pas ce genre de problème prochainement ?
Ma config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#12 Le 14/02/2021, à 19:19
- herveD
Re : blocage ouverture session et error loading operating system
Bonsoir
Bon 15 ours plus tard, amélioration certaine mais tjs problème aléatoire de plantage.
Ce qui s'est amélioré , c'est l'avant dernière maj proposé par ubuntu, ce qui m'a fait pensé qu'Ubuntu avait bien du prendre un compte un problème (probable avec le contrôleur) dont parlait @jpoc
J'allais m'en féliciter après une semaine sans plantage quand la semaine dernière, suite à une nouvelle maj d'ubuntu, je me retrouve avec un plantage, lors de la mise en veille de l'écran.
La lenteur d'accès au système de fichiers ayant lui totalement disparu depuis l'avant-dernière maj !!
j'ai commencé à enlever point par point la
verrouillage de l'écran lors de la mise en veille
verrouillage auto de l'écran
=> ce verrouillage m’empecherait de revenir à l’utilisation normale de l'écran (la musique continuant à fonctionner) et m'obligeant à redémarrer l'écran
et enfin à l'instant le délai de l'écran noir à jamais. Je vous tiendrai au courant dans qq jours si tout se passe bien ou .. mal
mais si vous vu des problèmes passées ou suggestions, vous pouvez ... toujours
@+
Ma config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#13 Le 22/02/2021, à 19:28
- herveD
Re : blocage ouverture session et error loading operating system
Bonsoir
Tjs désespéré et las de relancer maintenant au moins 1 fois/jour mon ordinateur quand celui-ci se bloque a l'ouverture de la session (après verrouillage auto de lécran)
A nouveau parfois de manière aléatoire des ralentissements pour lire ou écrire des fichiers !!
Si c'était un pb de pilote du disque samsung identifié, comment cela se fait-il qu'il ne sot pas corrigé plusieurs semaines après ?
mais est-ce bien cela ?Est-ce un autre pb qu'Ubuntu ?
Est-ce qu'il faut que j'ouvre un nouveau fil ?
Ma config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#14 Le 22/02/2021, à 22:07
- jpoc
Re : blocage ouverture session et error loading operating system
Il y a peut-etre un probleme avec le driver d'un peripherique
Désactiver l'ACPI pour voir si cela arrange le problème
modifier le fichier de config de GRUB avec un éditeur de fichier et ajouter acpi=off
"GRUB_CMDLINE_LINUX_DEFAULT= acpi=off "faire prendre en comptepar GRUB
sudo update-grubsi ça change rien revenir comme avant
voir aussi les peripheriques avec
sudo lpciregarder si les drivers vont bien surtout la carte video
janv. 24 15:20:31 ordi kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200528/utaddress-204)
[ 0.826546] kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Hors ligne
#15 Le 24/02/2021, à 19:34
- herveD
Re : blocage ouverture session et error loading operating system
Bonsoir
Bon je n'ai pas encore fait le test car je n'ai plus eu de plantage depuis ces derniers jours ni problème au parcours des fichiers
La seule chose que j'ai faite c'est de désactiver le verrouillage de l'écran !
Sinon je n'ai pas trouvé la commande lpci mais j’imagine que c'est plutôt lspci !?
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)Ma config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#16 Le 24/02/2021, à 20:38
- jpoc
Re : blocage ouverture session et error loading operating system
Essayer de reinstaller le pilote video de la carte intel intégrée
sudo apt-get reinstall xf86-video-intelHors ligne
#17 Le 24/02/2021, à 21:25
- herveD
Re : blocage ouverture session et error loading operating system
merci de persévérer :-)
Je ne sais pas comment trouver le nom mais j'ai malheureusement un échec
sudo apt-get reinstall xf86-video-intel
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet xf86-video-intelMa config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne
#18 Le 24/02/2021, à 22:39
- jpoc
Re : blocage ouverture session et error loading operating system
sudo apt-get reinstall xserver-xorg-video-intelHors ligne
#19 Le 24/02/2021, à 22:43
- herveD
Re : blocage ouverture session et error loading operating system
Ok fait.
Plus qu'à espérer !
A suivre
Merci
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libc-dev-bin libcrypt-dev libfprint-2-tod1 libllvm10 linux-headers-5.8.0-41-generic linux-hwe-5.8-headers-5.8.0-41 linux-image-5.8.0-41-generic
linux-modules-5.8.0-41-generic linux-modules-extra-5.8.0-41-generic
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 1 réinstallés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 737 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Réception de :1 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 xserver-xorg-video-intel amd64 2:2.99.917+git20200226-1 [737 kB]
737 ko réceptionnés en 0s (4837 ko/s)
(Lecture de la base de données... 236455 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../xserver-xorg-video-intel_2%3a2.99.917+git20200226-1_amd64.deb ...
Dépaquetage de xserver-xorg-video-intel (2:2.99.917+git20200226-1) sur (2:2.99.917+git20200226-1) ...
Paramétrage de xserver-xorg-video-intel (2:2.99.917+git20200226-1) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.1-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-0ubuntu9.2) ...Ma config actuelle : Ubuntu 23.10 - 64b - https://clibre.eu/
Hors ligne