Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

nany · Le 10/05/2021, à 10:45

OK. Alors donne le retour de :

sudo sed -i 's/set default="0"/set default="1>2"/' /boot/grub/grub.cfg && head -30 /boot/grub/grub.cfg

kinder · Le 10/05/2021, à 10:57

Voilà

stephane@stephane-MS-7817:~$ sudo sed -i 's/set default="0"/set default="1>2"/' /boot/grub/grub.cfg && head -30 /boot/grub/grub.cfg
[sudo] Mot de passe de stephane : 
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${initrdfail}" = 2 ]; then
   set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
   set next_entry="${prev_entry}"
   set prev_entry=
   save_env prev_entry
   if [ "${next_entry}" ]; then
      set initrdfail=2
   fi
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="1>2"
fi
stephane@stephane-MS-7817:~$

nany · Le 10/05/2021, à 11:14

Bien, maintenant redémarre puis donne le retour de :

uname -r

kinder · Le 10/05/2021, à 11:17

Je consultais des pages sur internet et d'un coup je n'ai plus accès à rien , seul le curseur de la souris peut bouger mais quand je cliques sur quelque chose , il ne se passe rien .
Puis il s'est mis en veille , j'ai tapé mon mot de passe , seulement 10 secondes après le bureau s'est affiché et mon navigateur était fermé ainsi que le Terminal qui étaient ouverts pendant se bug .

Dernière modification par kinder (Le 10/05/2021, à 11:18)

kinder · Le 10/05/2021, à 11:40

Je viens de lancer une recherche de mon imprimante , à priori les pilotes se sont installés ...
C'est le bon nom d'imprimante , mais quand je lance une impression , rien ne se passe .

Dernière modification par kinder (Le 10/05/2021, à 11:40)

kinder · Le 10/05/2021, à 11:43

Voilà pour la dernière commande mais mon affichage bug un max , cela deviens difficile

stephane@stephane-MS-7817:~$ uname -r
5.8.0-50-generic
stephane@stephane-MS-7817:~$

Dernière modification par kinder (Le 10/05/2021, à 11:44)

nany · Le 10/05/2021, à 11:48

As-tu redémarré ?

Je pense que non car autrement la commande devrait retourner 5.8.0-43-generic.

kinder · Le 10/05/2021, à 11:53

Ok , je viens de redémarrer et voilà

stephane@stephane-MS-7817:~$ uname -r
5.8.0-50-generic
stephane@stephane-MS-7817:~$

nany · Le 10/05/2021, à 11:58

Erk ! Ce n’est pas normal.

Redonne le retour de :

head -30 /boot/grub/grub.cfg

kinder · Le 10/05/2021, à 11:59

Voilà

 stephane@stephane-MS-7817:~$ head -30 /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${initrdfail}" = 2 ]; then
   set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
   set next_entry="${prev_entry}"
   set prev_entry=
   save_env prev_entry
   if [ "${next_entry}" ]; then
      set initrdfail=2
   fi
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="1>2"
fi
stephane@stephane-MS-7817:~$

kinder · Le 10/05/2021, à 12:01

Sinon voilà ce que j'ai dans les paramètres , mon imprimante est la DCP-J515W , l'autre je ne sais pas pourquoi elle est là , mais impossible en tout cas d'imprimer , une idée pour que cela fonctionne ?

Avec ce script peut-être mais je ne sas pas s'il fonctionne encore => https://forum.ubuntu-fr.org/viewtopic.p … 1#p6368981

Dernière modification par kinder (Le 10/05/2021, à 12:04)

nany · Le 10/05/2021, à 12:47

kinder a écrit :

Voilà

…
   set default="1>2"
…

Normalement ça devrait démarrer (si on ne fait aucune manipulation à l’affichage du menu GRUB) sur la version 43.

Re-redémarre sans rien toucher puis redonne le retour de :

uname -r

On s’occupera de l’imprimante après.

kinder · Le 10/05/2021, à 12:54

J'ai redémarré et bizarrement il m'a fallu sélectionner " Ubuntu " car il était sur la ligne en dessous

Voilà pour la commande

stephane@stephane-MS-7817:~$ uname -r
5.8.0-50-generic
stephane@stephane-MS-7817:~$

nany · Le 10/05/2021, à 13:06

kinder a écrit :

J'ai redémarré et bizarrement il m'a fallu sélectionner " Ubuntu " car il était sur la ligne en dessous

Non, non et non. J’ai dit de redémarrer sans rien toucher. Il faut attendre le démarrage automatique (voir le décompte des secondes en bas de l’écran).

kinder · Le 10/05/2021, à 13:15

oups...désolé

Voilà

 stephane@stephane-MS-7817:~$ uname -r
5.8.0-43-generic
stephane@stephane-MS-7817:~$

nany · Le 10/05/2021, à 13:47

Ouais ! \o/
Normalement tu ne devrais plus avoir le bug d’affichage sur cette version du noyau.

Pour l’imprimante :

cd ~/Téléchargements && wget -c https://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.2-2.gz ; cd

cd ~/Téléchargements && gunzip linux-brprinter-installer-2.2.2-2.gz ; cd

cd ~/Téléchargements && sudo bash linux-brprinter-installer-2.2.2-2 DCP-J515W ; cd

kinder · Le 10/05/2021, à 13:55

faut mettre quoi là ?

 Will you specify the Device URI? [Y/n] ->

Traduction Google => Allez-vous spécifier l'URI du périphérique?

ça ne m'aide pas car " l'URI d'un périphérique " je ne sais pas ce que c'est

Edit :

Bon bin j'ai répondu " y " et maintenant il me demande ça

 select the number of destination Device URI

Traduction Google => sélectionnez le numéro de l'URI du périphérique de destination

Sauf que vu que je n'ai aucune idée de ce qu'est un URI , je suis bloqué..........:/

Re-Edit :

Voilà ou je suis rendu et bloqué

 stephane@stephane-MS-7817:~$ cd ~/Téléchargements && wget -c https://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.2-2.gz ; cd
--2021-05-10 13:52:31--  https://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.2-2.gz
Résolution de download.brother.com (download.brother.com)… 2.22.77.18
Connexion à download.brother.com (download.brother.com)|2.22.77.18|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 24517 (24K) [application/x-gzip]
Enregistre : «linux-brprinter-installer-2.2.2-2.gz»

linux-brprinter-ins 100%[===================>]  23,94K  --.-KB/s    ds 0,004s  

2021-05-10 13:52:31 (5,49 MB/s) - «linux-brprinter-installer-2.2.2-2.gz» enregistré [24517/24517]

stephane@stephane-MS-7817:~$ cd ~/Téléchargements && gunzip linux-brprinter-installer-2.2.2-2.gz ; cd
stephane@stephane-MS-7817:~$ cd ~/Téléchargements && sudo bash linux-brprinter-installer-2.2.2-2 DCP-J515W ; cd
[sudo] Mot de passe de stephane : 
You are going to install following packages.
   dcpj515wlpr-1.1.3-1.i386.deb
   dcpj515wcupswrapper-1.1.3-1.i386.deb
   brscan3-0.2.13-1.amd64.deb
   brscan-skey-0.3.1-2.amd64.deb
OK? [y/N] ->y


=========================================
Brother License Agreement

Brother retains any and all copyrights to the Software. In no case this Agreement shall be construed to assign or otherwise transfer from Brother to User any copyrights or other intellectual property rights to whole or any part of the Software.

Brother grants User a non-exclusive license: to reproduce and/or distribute (via Internet or in any other manner) the Software. Further, Brother grants User a non-exclusive license to modify, alter, translate or otherwise prepare derivative works of the Software and to reproduce and distribute (via Internet or in any other manner) such modification, alteration, translation or other derivative works for any purpose.

The license of the Software from Brother hereunder is granted "AS IS." BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Brother shall have no liability in contract, tort (including negligence or breach of statutory duty) or otherwise for any interruption of use, loss of data, or for any indirect, incidental, punitive or consequential loss or damage, or for any loss of profit, revenue, data, goodwill or anticipated savings that arises under, out of, or in contemplation of this Agreement or otherwise arises due to any error, inaccuracy or defect in the Software even if Brother has been advised of the possibility of such loss or damage.
Further, Brother shall have no liability to disclose and/or distribute the source cord of the Software to User under any circumstances. In no case shall the above license by Brother to modify, alter, translate or otherwise prepare derivative works of the Software be construed as Brother's implied agreement or undertakings to disclose and/or distribute the source cord of the Software.
=========================================
Do you agree? [Y/n] ->y

wget -T 10 -nd --no-cache http://www.brother.com/pub/bsc/linux/packages/dcpj515wlpr-1.1.3-1.i386.deb
--2021-05-10 13:53:18--  http://www.brother.com/pub/bsc/linux/packages/dcpj515wlpr-1.1.3-1.i386.deb
Résolution de www.brother.com (www.brother.com)… 104.124.185.77
Connexion à www.brother.com (www.brother.com)|104.124.185.77|:80… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 1895568 (1,8M) [application/x-troff-man]
Enregistre : «dcpj515wlpr-1.1.3-1.i386.deb»

dcpj515wlpr-1.1.3-1 100%[===================>]   1,81M  2,56MB/s    ds 0,7s    

2021-05-10 13:53:19 (2,56 MB/s) - «dcpj515wlpr-1.1.3-1.i386.deb» enregistré [1895568/1895568]


=========================================
GPL License Agreement

This Software may be used in accordance with GNU General Public License (GPL). Please read carefully the following GPL and click on "I Accept" button. If you cannot agree with the following terms, please click "I don't Accept" button. In case of your non-acceptance, you can not use this Software.
Note:
Please click on "I Accept" while holding down "Shift" or right click on "I Accept" and select "Save Target As,,," from the menu.

GNU GENERAL PUBLIC LICENSE
Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

   1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.

      You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
   2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

      a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

      b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

      c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an
      announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)
      
      These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

      Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.

      In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
   3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

      a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

      b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

      c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you
      received the program in object code or executable form with such an offer, in accord with Subsection b above.)

      The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

      If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
   4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
   5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying
      the Program or works based on it.
   6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.
   7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.

      If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.

      It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

      This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
   8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
   9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

      Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.
  10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.

<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA


Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision
comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.

<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License.
=========================================

Do you agree? [Y/n] ->y

wget -T 10 -nd --no-cache http://www.brother.com/pub/bsc/linux/packages/dcpj515wcupswrapper-1.1.3-1.i386.deb
--2021-05-10 13:53:22--  http://www.brother.com/pub/bsc/linux/packages/dcpj515wcupswrapper-1.1.3-1.i386.deb
Résolution de www.brother.com (www.brother.com)… 104.124.185.77
Connexion à www.brother.com (www.brother.com)|104.124.185.77|:80… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 13602 (13K) [application/x-troff-man]
Enregistre : «dcpj515wcupswrapper-1.1.3-1.i386.deb»

dcpj515wcupswrapper 100%[===================>]  13,28K  --.-KB/s    ds 0,004s  

2021-05-10 13:53:23 (3,02 MB/s) - «dcpj515wcupswrapper-1.1.3-1.i386.deb» enregistré [13602/13602]

Atteint :1 http://fr.archive.ubuntu.com/ubuntu focal InRelease
Atteint :2 http://fr.archive.ubuntu.com/ubuntu focal-updates InRelease         
Atteint :3 http://dl.google.com/linux/chrome/deb stable InRelease              
Atteint :4 http://fr.archive.ubuntu.com/ubuntu focal-backports InRelease       
Atteint :5 http://security.ubuntu.com/ubuntu focal-security InRelease          
Lecture des listes de paquets... Fait               
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Aucune version du paquet ia32-libs n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète
ou qu'il n'est disponible que sur une autre source
Cependant les paquets suivants le remplacent :
  lib32z1

E: Le paquet « ia32-libs » n'a pas de version susceptible d'être installée
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi
  libgstreamer-plugins-bad1.0-0 libva-wayland2
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets supplémentaires suivants seront installés : 
  lib32gcc-s1 libc6-i386
Les NOUVEAUX paquets suivants seront installés :
  lib32gcc-s1 lib32stdc++6 libc6-i386
0 mis à jour, 3 nouvellement installés, 0 à enlever et 2 non mis à jour.
Il est nécessaire de prendre 3298 ko dans les archives.
Après cette opération, 17,2 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de :1 http://fr.archive.ubuntu.com/ubuntu focal-updates/main amd64 libc6-i386 amd64 2.31-0ubuntu9.2 [2723 kB]
Réception de :2 http://fr.archive.ubuntu.com/ubuntu focal-updates/main amd64 lib32gcc-s1 amd64 10.2.0-5ubuntu1~20.04 [49,6 kB]
Réception de :3 http://fr.archive.ubuntu.com/ubuntu focal-updates/main amd64 lib32stdc++6 amd64 10.2.0-5ubuntu1~20.04 [525 kB]
3298 ko réceptionnés en 1s (2516 ko/s)
Sélection du paquet libc6-i386 précédemment désélectionné.
(Lecture de la base de données... 188574 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libc6-i386_2.31-0ubuntu9.2_amd64.deb ...
Dépaquetage de libc6-i386 (2.31-0ubuntu9.2) ...
Sélection du paquet lib32gcc-s1 précédemment désélectionné.
Préparation du dépaquetage de .../lib32gcc-s1_10.2.0-5ubuntu1~20.04_amd64.deb ...
Dépaquetage de lib32gcc-s1 (10.2.0-5ubuntu1~20.04) ...
Sélection du paquet lib32stdc++6 précédemment désélectionné.
Préparation du dépaquetage de .../lib32stdc++6_10.2.0-5ubuntu1~20.04_amd64.deb ...
Dépaquetage de lib32stdc++6 (10.2.0-5ubuntu1~20.04) ...
Paramétrage de libc6-i386 (2.31-0ubuntu9.2) ...
Paramétrage de lib32gcc-s1 (10.2.0-5ubuntu1~20.04) ...
Paramétrage de lib32stdc++6 (10.2.0-5ubuntu1~20.04) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-0ubuntu9.2) ...
dpkg -x dcpj515wlpr-1.1.3-1.i386.deb /
dpkg -x dcpj515wcupswrapper-1.1.3-1.i386.deb /
dpkg-deb: building package 'dcpj515wlpr' in 'dcpj515wlpr-1.1.3-1a.i386.deb'.
dpkg -b ./brother_driver_packdir dcpj515wlpr-1.1.3-1a.i386.deb
dpkg-deb: building package 'dcpj515wcupswrapper' in 'dcpj515wcupswrapper-1.1.3-1a.i386.deb'.
dpkg -b ./brother_driver_packdir dcpj515wcupswrapper-1.1.3-1a.i386.deb
dpkg -i --force-all dcpj515wlpr-1.1.3-1a.i386.deb
Sélection du paquet dcpj515wlpr:i386 précédemment désélectionné.
(Lecture de la base de données... 188884 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de dcpj515wlpr-1.1.3-1a.i386.deb ...
Dépaquetage de dcpj515wlpr:i386 (1.1.3-1) ...
Paramétrage de dcpj515wlpr:i386 (1.1.3-1) ...
mkdir: impossible de créer le répertoire «/var/spool/lpd/dcpj515w»: Aucun fichier ou dossier de ce type
chown: impossible d'accéder à '/var/spool/lpd/dcpj515w': Aucun fichier ou dossier de ce type
chgrp: impossible d'accéder à '/var/spool/lpd/dcpj515w': Aucun fichier ou dossier de ce type
chmod: impossible d'accéder à '/var/spool/lpd/dcpj515w': Aucun fichier ou dossier de ce type
dpkg -i --force-all dcpj515wcupswrapper-1.1.3-1a.i386.deb
Sélection du paquet dcpj515wcupswrapper:i386 précédemment désélectionné.
(Lecture de la base de données... 188906 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de dcpj515wcupswrapper-1.1.3-1a.i386.deb ...
Dépaquetage de dcpj515wcupswrapper:i386 (1.1.3-1) ...
Paramétrage de dcpj515wcupswrapper:i386 (1.1.3-1) ...
Restarting cups (via systemctl): cups.service.
lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS.
#
Will you specify the Device URI? [Y/n] ->y


0: ipps
1: usb://Brother/DCP-J515W?serial=BROF0F343323
2: cups-brf:/
3: beh
4: socket
5: lpd
6: https
7: ipp
8: http
9: serial:/dev/ttyS0?baud=115200
10: hp
11: hpfax
12: dnssd://Brother%20DCP-J515W._pdl-datastream._tcp.local/
13: lpd://BRW00225813396B/BINARY_P1
14 (I): Specify IP address.
15 (A): Auto. (usb://Brother/DCP-J515W?serial=BROF0F343323)

select the number of destination Device URI. ->

Dernière modification par kinder (Le 10/05/2021, à 14:43)

kinder · Le 10/05/2021, à 14:58

Bon bin problème URI résolu , j'ai refais toutes les lignes de commande et j'ai répondu " n "

stephane@stephane-MS-7817:~$ cd ~/Téléchargements && wget -c https://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.2-2.gz ; cd
--2021-05-10 14:53:08--  https://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.2-2.gz
Résolution de download.brother.com (download.brother.com)… 2.22.77.18
Connexion à download.brother.com (download.brother.com)|2.22.77.18|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 24517 (24K) [application/x-gzip]
Enregistre : «linux-brprinter-installer-2.2.2-2.gz»

linux-brprinter-ins 100%[===================>]  23,94K  --.-KB/s    ds 0,004s  

2021-05-10 14:53:08 (5,25 MB/s) - «linux-brprinter-installer-2.2.2-2.gz» enregistré [24517/24517]

stephane@stephane-MS-7817:~$ cd ~/Téléchargements && gunzip linux-brprinter-installer-2.2.2-2.gz ; cd
gzip: linux-brprinter-installer-2.2.2-2 already exists; do you wish to overwrite (y or n)? y
stephane@stephane-MS-7817:~$ cd ~/Téléchargements && sudo bash linux-brprinter-installer-2.2.2-2 DCP-J515W ; cd
[sudo] Mot de passe de stephane : 
You are going to install following packages.
   dcpj515wlpr-1.1.3-1.i386.deb
   dcpj515wcupswrapper-1.1.3-1.i386.deb
   brscan3-0.2.13-1.amd64.deb
   brscan-skey-0.3.1-2.amd64.deb
OK? [y/N] ->y

Atteint :1 http://fr.archive.ubuntu.com/ubuntu focal InRelease
Atteint :2 http://dl.google.com/linux/chrome/deb stable InRelease              
Atteint :3 http://fr.archive.ubuntu.com/ubuntu focal-updates InRelease         
Atteint :4 http://fr.archive.ubuntu.com/ubuntu focal-backports InRelease       
Atteint :5 http://security.ubuntu.com/ubuntu focal-security InRelease
Lecture des listes de paquets... Fait
E: dpkg a été interrompu. Il est nécessaire d'utiliser « sudo dpkg --configure -a » pour corriger le problème.
dpkg -x dcpj515wlpr-1.1.3-1.i386.deb /
dpkg -x dcpj515wcupswrapper-1.1.3-1.i386.deb /
(Lecture de la base de données... 188953 fichiers et répertoires déjà installés.)
Suppression de dcpj515wcupswrapper:i386 (1.1.3-1) ...
Restarting cups (via systemctl): cups.service.
dpkg-deb: building package 'dcpj515wlpr' in 'dcpj515wlpr-1.1.3-1a.i386.deb'.
dpkg -b ./brother_driver_packdir dcpj515wlpr-1.1.3-1a.i386.deb
dpkg-deb: building package 'dcpj515wcupswrapper' in 'dcpj515wcupswrapper-1.1.3-1a.i386.deb'.
dpkg -b ./brother_driver_packdir dcpj515wcupswrapper-1.1.3-1a.i386.deb
dpkg -i --force-all dcpj515wlpr-1.1.3-1a.i386.deb
(Lecture de la base de données... 188949 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de dcpj515wlpr-1.1.3-1a.i386.deb ...
Dépaquetage de dcpj515wlpr:i386 (1.1.3-1) sur (1.1.3-1) ...
Paramétrage de dcpj515wlpr:i386 (1.1.3-1) ...
mkdir: impossible de créer le répertoire «/var/spool/lpd/dcpj515w»: Aucun fichier ou dossier de ce type
chown: impossible d'accéder à '/var/spool/lpd/dcpj515w': Aucun fichier ou dossier de ce type
chgrp: impossible d'accéder à '/var/spool/lpd/dcpj515w': Aucun fichier ou dossier de ce type
chmod: impossible d'accéder à '/var/spool/lpd/dcpj515w': Aucun fichier ou dossier de ce type
dpkg -i --force-all dcpj515wcupswrapper-1.1.3-1a.i386.deb
Sélection du paquet dcpj515wcupswrapper:i386 précédemment désélectionné.
(Lecture de la base de données... 188949 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de dcpj515wcupswrapper-1.1.3-1a.i386.deb ...
Dépaquetage de dcpj515wcupswrapper:i386 (1.1.3-1) ...
Paramétrage de dcpj515wcupswrapper:i386 (1.1.3-1) ...
Restarting cups (via systemctl): cups.service.
lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS.
#
Will you specify the Device URI? [Y/n] ->n

Test Print? [y/N] ->y

wait 5s.
lpr -P DCPJ515W /usr/share/cups/data/testprint
You are going to install following packages.
   brscan3-0.2.13-1.amd64.deb
dpkg -i --force-all brscan3-0.2.13-1.amd64.deb
(Lecture de la base de données... 188953 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de brscan3-0.2.13-1.amd64.deb ...
Dépaquetage de brscan3 (0.2.13-1) sur (0.2.13-1) ...
Paramétrage de brscan3 (0.2.13-1) ...
You are going to install following packages.
   brscan-skey-0.3.1-2.amd64.deb
dpkg -i --force-all brscan-skey-0.3.1-2.amd64.deb
(Lecture de la base de données... 188953 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de brscan-skey-0.3.1-2.amd64.deb ...
Dépaquetage de brscan-skey (0.3.1-2) sur (0.3.1-2) ...
Paramétrage de brscan-skey (0.3.1-2) ...
apt-get install libusb-0.1-4
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi
  libgstreamer-plugins-bad1.0-0 libva-wayland2
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les NOUVEAUX paquets suivants seront installés :
  libusb-0.1-4
0 mis à jour, 1 nouvellement installés, 0 à enlever et 6 non mis à jour.
Il est nécessaire de prendre 17,4 ko dans les archives.
Après cette opération, 58,4 ko d'espace disque supplémentaires seront utilisés.
Réception de :1 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 libusb-0.1-4 amd64 2:0.1.12-32 [17,4 kB]
17,4 ko réceptionnés en 0s (251 ko/s)     
Sélection du paquet libusb-0.1-4:amd64 précédemment désélectionné.
(Lecture de la base de données... 188953 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libusb-0.1-4_2%3a0.1.12-32_amd64.deb ...
Dépaquetage de libusb-0.1-4:amd64 (2:0.1.12-32) ...
Paramétrage de libusb-0.1-4:amd64 (2:0.1.12-32) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-0ubuntu9.2) ...
stephane@stephane-MS-7817:~$

J'ai fait le test d'impression et c'est parfait , merci Nany

Dernière modification par kinder (Le 10/05/2021, à 14:59)

kinder · Le 15/05/2021, à 15:00

Bonjour ,
aujourd'hui je démarre mon PC et arrivé sur le menu Grub , le * se met sur " Ubuntu " , je laisse démarrer comme ça .
J'ouvre le Terminal et met cette ligne de commande

uname -r

Et voilà

stephane@stephane-MS-7817:~$ uname -r
5.8.0-53-generic
stephane@stephane-MS-7817:~$

Avec cette version , y a-t-il eu une correction pour éviter les lags d'écran ?

nany · Le 15/05/2021, à 15:06

kinder a écrit :

Avec cette version , y a-t-il eu une correction pour éviter les lags d'écran ?

Je ne sais pas, ce n’est pas certain.
À voir sur le long terme, donc.

kinder · Le 15/05/2021, à 16:49

Pour l'instant cela ne bug pas , à voir dans le temps ...

Je me suis aperçu d'un truc gênant , par exemple avec la souris je prend dans " Fichiers " un document et je veux le déplacer sur le " Bureau " ,
que ce soit dans ce sens ou dans l'autre , il me faut faire un " Couper/Coller " pour que cela marche .
Est-il possible que cela soit plus naturel en faisant tout simplement glisser le document avec la souris .

nany · Le 15/05/2021, à 17:17

kinder a écrit :

Est-il possible que cela soit plus naturel en faisant tout simplement glisser le document avec la souris .

Je ne me sers pas du bureau donc je ne saurais trop aider sur le sujet.

Peut-être en désactivant l’extension Desktop Icons et en installant DING ?

kinder · Le 15/05/2021, à 17:43

Ok , pour l'instant je vais laissé comme ça , cela évitera surement de laisser un bordel sur le bureau

kinder · Le 18/05/2021, à 15:31

Bonjour , je recommence à avoir des bugs d'affichage .
Ils sont différents de la dernière fois mais de plus en plus gênants .

stephane@stephane-MS-7817:~$ uname -r
5.8.0-53-generic
stephane@stephane-MS-7817:~$

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#101 Le 10/05/2021, à 10:45

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#102 Le 10/05/2021, à 10:57

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#103 Le 10/05/2021, à 11:14

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#104 Le 10/05/2021, à 11:17

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#105 Le 10/05/2021, à 11:40

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#106 Le 10/05/2021, à 11:43

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#107 Le 10/05/2021, à 11:48

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#108 Le 10/05/2021, à 11:53

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#109 Le 10/05/2021, à 11:58

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#110 Le 10/05/2021, à 11:59

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#111 Le 10/05/2021, à 12:01

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#112 Le 10/05/2021, à 12:47

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#113 Le 10/05/2021, à 12:54

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#114 Le 10/05/2021, à 13:06

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#115 Le 10/05/2021, à 13:15

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#116 Le 10/05/2021, à 13:47

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#117 Le 10/05/2021, à 13:55

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#118 Le 10/05/2021, à 14:58

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#119 Le 15/05/2021, à 15:00

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#120 Le 15/05/2021, à 15:06

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#121 Le 15/05/2021, à 16:49

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#122 Le 15/05/2021, à 17:17

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#123 Le 15/05/2021, à 17:43

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

#124 Le 18/05/2021, à 15:31

Re : Dual boot Ubuntu 20.04.2LTS+Windows 10 , pas de Grub ni d'internet

Pied de page des forums