#26 Le 30/07/2021, à 21:55
- xubu1957
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Vu :
intel_wmi_thunderbolt 20480 0J'ai souvenance de ce fil > [Résolu] Double écran sur Inspiron 7370
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#27 Le 31/07/2021, à 10:58
- jlc62
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Bonjour,
Merci pour cette idée, mais je ne suis pas branché en USB-C (et encore moins à travers un dock USB3) mais en direct en displayport. Pourquoi aurais-je besoin de ce pilote ? Ce serait bizarre...
J'ai l'impression que le problème est lié au chipset graphique du processeur 11th gen : pas encore bien supporté sur linux ? On devrait être nombreux à rencontrer ce problème...
Ubuntu 20.04 (64 bits)
Hors ligne
#28 Le 31/07/2021, à 11:00
- xubu1957
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Bonjour,
Et tester une version 21.04 en session live ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#29 Le 31/07/2021, à 11:06
- Nuliel
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Tu peux brancher les deux écrans, redémarrer et donner
dmesgon trouvera peut être des erreurs là dedans.
Hors ligne
#30 Le 31/07/2021, à 15:13
- Nuliel
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Le mode live est très bien pour tester sans installer.
Si cela vient de l'install, cela vindrait plutôt du noyau. Pour cela on peut utiliser mainline pour tester des noyaux ultra récents.
Hors ligne
#31 Le 31/07/2021, à 15:13
- xubu1957
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
@Marcoux87
Règles du forum a écrit :
Pour les demandes techniques, la priorité doit être donnée à une solution tenant compte de l'environnement utilisateur. Les suggestions de migrations (changement d'environnement de bureau, changement de système) ne doivent être abordées qu'à titre complémentaire, ou si aucune autre solution n'a pu être trouvée.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#32 Le 31/07/2021, à 16:16
- jlc62
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
@Nuliel
fabien@fabien-tour:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x40, date = 2021-04-11
[ 0.000000] Linux version 5.8.0-63-generic (buildd@lgw01-amd64-035) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #71~20.04.1-Ubuntu SMP Thu Jul 15 17:46:08 UTC 2021 (Ubuntu 5.8.0-63.71~20.04.1-generic 5.8.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-63-generic root=UUID=f19ad1af-828c-4239-acd0-ad7af471812a ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: xstate_offset[5]: 960, xstate_sizes[5]: 64
[ 0.000000] x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]: 512
[ 0.000000] x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024
[ 0.000000] x86/fpu: xstate_offset[9]: 2560, xstate_sizes[9]: 8
[ 0.000000] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000081141fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000081142000-0x0000000081142fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000081143000-0x00000000849fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000849ff000-0x0000000084ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000084fff000-0x00000000850fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000850ff000-0x00000000852fefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000852ff000-0x0000000085ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000085fff000-0x0000000085ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000086000000-0x000000008f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004707fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x7e730018-0x7e73f057] usable ==> usable
[ 0.000000] e820: update [mem 0x7e730018-0x7e73f057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000007e730017] usable
[ 0.000000] reserve setup_data: [mem 0x000000007e730018-0x000000007e73f057] usable
[ 0.000000] reserve setup_data: [mem 0x000000007e73f058-0x0000000081141fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000081142000-0x0000000081142fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000081143000-0x00000000849fefff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000849ff000-0x0000000084ffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000084fff000-0x00000000850fefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000850ff000-0x00000000852fefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000852ff000-0x0000000085ffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000085fff000-0x0000000085ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000086000000-0x000000008f7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004707fffff] usable
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI=0x85299000 ACPI 2.0=0x85299014 SMBIOS=0x85d1d000 SMBIOS 3.0=0x85d1c000 MEMATTR=0x7f24e098 ESRT=0x7ffe3898 RNG=0x85d20b18
[ 0.000000] efi: seeding entropy pool
[ 0.000000] random: fast init done
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7D09/Z590-A PRO (MS-7D09), BIOS 1.00 01/14/2021
[ 0.000000] tsc: Detected 2800.000 MHz processor
[ 0.000584] tsc: Detected 2808.000 MHz TSC
[ 0.000584] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000585] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000591] last_pfn = 0x470800 max_arch_pfn = 0x400000000
[ 0.000594] MTRR default type: write-back
[ 0.000595] MTRR fixed ranges enabled:
[ 0.000596] 00000-9FFFF write-back
[ 0.000596] A0000-BFFFF uncachable
[ 0.000597] C0000-FFFFF write-protect
[ 0.000597] MTRR variable ranges enabled:
[ 0.000599] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000599] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000600] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000600] 3 base 008C000000 mask 7FFC000000 uncachable
[ 0.000601] 4 base 008B000000 mask 7FFF000000 uncachable
[ 0.000602] 5 base 2000000000 mask 6000000000 uncachable
[ 0.000602] 6 base 1000000000 mask 7000000000 uncachable
[ 0.000603] 7 base 0800000000 mask 7800000000 uncachable
[ 0.000603] 8 base 4000000000 mask 4000000000 uncachable
[ 0.000604] 9 disabled
[ 0.001094] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001285] last_pfn = 0x86000 max_arch_pfn = 0x400000000
[ 0.017270] esrt: Reserving ESRT space from 0x000000007ffe3898 to 0x000000007ffe38d0.
[ 0.017274] e820: update [mem 0x7ffe3000-0x7ffe3fff] usable ==> reserved
[ 0.017289] check: Scanning 1 areas for low memory corruption
[ 0.017293] Using GB pages for direct mapping
[ 0.017889] secureboot: Secure boot disabled
[ 0.017889] RAMDISK: [mem 0x3cbb5000-0x3fffdfff]
[ 0.017894] ACPI: Early table checksum verification disabled
[ 0.017897] ACPI: RSDP 0x0000000085299014 000024 (v02 ALASKA)
[ 0.017900] ACPI: XSDT 0x0000000085298728 0000E4 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.017904] ACPI: FACP 0x00000000850FB000 000114 (v06 ALASKA A M I 01072009 AMI 01000013)
[ 0.017909] ACPI: DSDT 0x00000000850A5000 055BF6 (v02 ALASKA A M I 01072009 INTL 20180209)
[ 0.017911] ACPI: FACS 0x00000000852FE000 000040
[ 0.017913] ACPI: MCFG 0x00000000850FC000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.017916] ACPI: FIDT 0x00000000850A4000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.017918] ACPI: SSDT 0x00000000850A1000 0025FA (v02 CpuRef CpuSsdt 00003000 INTL 20180209)
[ 0.017921] ACPI: SSDT 0x000000008509C000 00441C (v02 SaSsdt SaSsdt 00003000 INTL 20180209)
[ 0.017923] ACPI: SSDT 0x0000000085098000 0032CD (v02 INTEL IgfxSsdt 00003000 INTL 20180209)
[ 0.017925] ACPI: HPET 0x00000000850FE000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.017927] ACPI: APIC 0x00000000850FD000 000164 (v04 ALASKA A M I 01072009 AMI 01000013)
[ 0.017930] ACPI: SSDT 0x0000000085097000 000E66 (v02 ALASKA Ther_Rvp 00001000 INTL 20180209)
[ 0.017932] ACPI: SSDT 0x0000000085096000 000DA5 (v02 INTEL xh_rksu4 00000000 INTL 20180209)
[ 0.017934] ACPI: NHLT 0x0000000085094000 0017F1 (v00 ALASKA A M I 01072009 AMI 01000013)
[ 0.017937] ACPI: SSDT 0x0000000085091000 002284 (v02 INTEL DTbtSsdt 00001000 INTL 20180209)
[ 0.017939] ACPI: UEFI 0x000000008527F000 000048 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.017941] ACPI: LPIT 0x0000000085090000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.017943] ACPI: SSDT 0x000000008508C000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20180209)
[ 0.017946] ACPI: SSDT 0x000000008508B000 000ADA (v02 ALASKA TbtTypeC 00000000 INTL 20180209)
[ 0.017948] ACPI: DBGP 0x000000008508A000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.017950] ACPI: DBG2 0x0000000085089000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
[ 0.017952] ACPI: SSDT 0x0000000085087000 0015B7 (v02 ALASKA UsbCTabl 00001000 INTL 20180209)
[ 0.017955] ACPI: SSDT 0x0000000085086000 000144 (v02 Intel ADebTabl 00001000 INTL 20180209)
[ 0.017957] ACPI: BGRT 0x0000000085085000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.017959] ACPI: PTDT 0x0000000085084000 000CF0 (v00 ALASKA A M I 00000005 MSFT 0100000D)
[ 0.017961] ACPI: WSMT 0x000000008508F000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.017964] ACPI: FPDT 0x0000000085083000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.017966] ACPI: Reserving FACP table memory at [mem 0x850fb000-0x850fb113]
[ 0.017967] ACPI: Reserving DSDT table memory at [mem 0x850a5000-0x850fabf5]
[ 0.017967] ACPI: Reserving FACS table memory at [mem 0x852fe000-0x852fe03f]
[ 0.017968] ACPI: Reserving MCFG table memory at [mem 0x850fc000-0x850fc03b]
[ 0.017968] ACPI: Reserving FIDT table memory at [mem 0x850a4000-0x850a409b]
[ 0.017969] ACPI: Reserving SSDT table memory at [mem 0x850a1000-0x850a35f9]
[ 0.017969] ACPI: Reserving SSDT table memory at [mem 0x8509c000-0x850a041b]
[ 0.017970] ACPI: Reserving SSDT table memory at [mem 0x85098000-0x8509b2cc]
[ 0.017970] ACPI: Reserving HPET table memory at [mem 0x850fe000-0x850fe037]
[ 0.017971] ACPI: Reserving APIC table memory at [mem 0x850fd000-0x850fd163]
[ 0.017972] ACPI: Reserving SSDT table memory at [mem 0x85097000-0x85097e65]
[ 0.017972] ACPI: Reserving SSDT table memory at [mem 0x85096000-0x85096da4]
[ 0.017973] ACPI: Reserving NHLT table memory at [mem 0x85094000-0x850957f0]
[ 0.017973] ACPI: Reserving SSDT table memory at [mem 0x85091000-0x85093283]
[ 0.017974] ACPI: Reserving UEFI table memory at [mem 0x8527f000-0x8527f047]
[ 0.017975] ACPI: Reserving LPIT table memory at [mem 0x85090000-0x850900cb]
[ 0.017975] ACPI: Reserving SSDT table memory at [mem 0x8508c000-0x8508e71f]
[ 0.017976] ACPI: Reserving SSDT table memory at [mem 0x8508b000-0x8508bad9]
[ 0.017976] ACPI: Reserving DBGP table memory at [mem 0x8508a000-0x8508a033]
[ 0.017977] ACPI: Reserving DBG2 table memory at [mem 0x85089000-0x85089053]
[ 0.017978] ACPI: Reserving SSDT table memory at [mem 0x85087000-0x850885b6]
[ 0.017978] ACPI: Reserving SSDT table memory at [mem 0x85086000-0x85086143]
[ 0.017979] ACPI: Reserving BGRT table memory at [mem 0x85085000-0x85085037]
[ 0.017979] ACPI: Reserving PTDT table memory at [mem 0x85084000-0x85084cef]
[ 0.017980] ACPI: Reserving WSMT table memory at [mem 0x8508f000-0x8508f027]
[ 0.017981] ACPI: Reserving FPDT table memory at [mem 0x85083000-0x85083043]
[ 0.017999] ACPI: Local APIC address 0xfee00000
[ 0.018133] No NUMA configuration found
[ 0.018134] Faking a node at [mem 0x0000000000000000-0x00000004707fffff]
[ 0.018140] NODE_DATA(0) allocated [mem 0x4707d6000-0x4707fffff]
[ 0.018384] Zone ranges:
[ 0.018384] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018385] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.018386] Normal [mem 0x0000000100000000-0x00000004707fffff]
[ 0.018386] Device empty
[ 0.018387] Movable zone start for each node
[ 0.018388] Early memory node ranges
[ 0.018389] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.018390] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.018390] node 0: [mem 0x0000000000100000-0x0000000081141fff]
[ 0.018391] node 0: [mem 0x0000000081143000-0x00000000849fefff]
[ 0.018391] node 0: [mem 0x0000000085fff000-0x0000000085ffffff]
[ 0.018392] node 0: [mem 0x0000000100000000-0x00000004707fffff]
[ 0.018393] Initmem setup node 0 [mem 0x0000000000001000-0x00000004707fffff]
[ 0.018395] On node 0 totalpages: 4149661
[ 0.018395] DMA zone: 64 pages used for memmap
[ 0.018396] DMA zone: 23 pages reserved
[ 0.018396] DMA zone: 3998 pages, LIFO batch:0
[ 0.018573] DMA zone: 28770 pages in unavailable ranges
[ 0.018573] DMA32 zone: 8424 pages used for memmap
[ 0.018574] DMA32 zone: 539135 pages, LIFO batch:63
[ 0.021361] DMA32 zone: 13825 pages in unavailable ranges
[ 0.021362] Normal zone: 56352 pages used for memmap
[ 0.021362] Normal zone: 3606528 pages, LIFO batch:63
[ 0.040596] Normal zone: 30720 pages in unavailable ranges
[ 0.040844] ACPI: PM-Timer IO Port: 0x1808
[ 0.040846] ACPI: Local APIC address 0xfee00000
[ 0.040853] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.040853] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.040854] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.040854] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.040854] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.040855] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.040855] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.040856] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.040856] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.040856] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.040857] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.040857] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.040858] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.040858] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.040858] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.040859] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.040859] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.040860] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.040860] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.040861] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.040896] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.040898] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.040899] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.040900] ACPI: IRQ0 used by override.
[ 0.040901] ACPI: IRQ9 used by override.
[ 0.040903] Using ACPI (MADT) for SMP configuration information
[ 0.040904] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.040911] e820: update [mem 0x7e7e9000-0x7e845fff] usable ==> reserved
[ 0.040918] TSC deadline timer available
[ 0.040919] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.040937] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.040938] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.040939] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.040940] PM: hibernation: Registered nosave memory: [mem 0x7e730000-0x7e730fff]
[ 0.040942] PM: hibernation: Registered nosave memory: [mem 0x7e73f000-0x7e73ffff]
[ 0.040943] PM: hibernation: Registered nosave memory: [mem 0x7e7e9000-0x7e845fff]
[ 0.040944] PM: hibernation: Registered nosave memory: [mem 0x7ffe3000-0x7ffe3fff]
[ 0.040945] PM: hibernation: Registered nosave memory: [mem 0x81142000-0x81142fff]
[ 0.040946] PM: hibernation: Registered nosave memory: [mem 0x849ff000-0x84ffefff]
[ 0.040947] PM: hibernation: Registered nosave memory: [mem 0x84fff000-0x850fefff]
[ 0.040947] PM: hibernation: Registered nosave memory: [mem 0x850ff000-0x852fefff]
[ 0.040948] PM: hibernation: Registered nosave memory: [mem 0x852ff000-0x85ffefff]
[ 0.040949] PM: hibernation: Registered nosave memory: [mem 0x86000000-0x8f7fffff]
[ 0.040949] PM: hibernation: Registered nosave memory: [mem 0x8f800000-0xdfffffff]
[ 0.040950] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.040950] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.040950] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.040951] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.040951] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.040952] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.040952] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.040952] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
[ 0.040953] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[ 0.040953] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
[ 0.040953] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.040954] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.040954] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.040956] [mem 0x8f800000-0xdfffffff] available for PCI devices
[ 0.040956] Booting paravirtualized kernel on bare hardware
[ 0.040959] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.040964] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.041252] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[ 0.041257] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[ 0.041258] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.041281] Built 1 zonelists, mobility grouping on. Total pages: 4084798
[ 0.041282] Policy zone: Normal
[ 0.041283] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-63-generic root=UUID=f19ad1af-828c-4239-acd0-ad7af471812a ro quiet splash vt.handoff=7
[ 0.041997] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.042331] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.042442] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.073018] Memory: 16075292K/16598644K available (14339K kernel code, 2538K rwdata, 5456K rodata, 2648K init, 4912K bss, 523352K reserved, 0K cma-reserved)
[ 0.073023] random: get_random_u64 called from kmem_cache_open+0x29/0x410 with crng_init=1
[ 0.073125] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.073135] ftrace: allocating 46483 entries in 182 pages
[ 0.087439] ftrace: allocated 182 pages with 5 groups
[ 0.087536] rcu: Hierarchical RCU implementation.
[ 0.087537] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
[ 0.087538] Trampoline variant of Tasks RCU enabled.
[ 0.087538] Rude variant of Tasks RCU enabled.
[ 0.087538] Tracing variant of Tasks RCU enabled.
[ 0.087539] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.087540] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.090247] NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
[ 0.090728] random: crng done (trusting CPU's manufacturer)
[ 0.090745] vt handoff: transparent VT on vt#7
[ 0.090750] Console: colour dummy device 80x25
[ 0.090754] printk: console [tty0] enabled
[ 0.090768] ACPI: Core revision 20200528
[ 0.091146] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.091243] APIC: Switch to symmetric I/O mode setup
[ 0.092511] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.092803] Switched APIC routing to physical flat.
[ 0.097047] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.115204] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[ 0.115208] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.00 BogoMIPS (lpj=11232000)
[ 0.115209] pid_max: default: 32768 minimum: 301
[ 0.117697] LSM: Security Framework initializing
[ 0.117706] Yama: becoming mindful.
[ 0.117725] AppArmor: AppArmor initialized
[ 0.117770] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.117789] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.117998] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.118022] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.118070] process: using mwait in idle threads
[ 0.118072] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.118072] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.118075] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.118077] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.118077] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.118078] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.118079] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.118329] Freeing SMP alternatives memory: 40K
[ 0.120183] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-11600 @ 2.80GHz (family: 0x6, model: 0xa7, stepping: 0x1)
[ 0.120270] Performance Events: PEBS fmt4+-baseline, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.120274] ... version: 5
[ 0.120275] ... bit width: 48
[ 0.120275] ... generic registers: 8
[ 0.120275] ... value mask: 0000ffffffffffff
[ 0.120276] ... max period: 00007fffffffffff
[ 0.120276] ... fixed-purpose events: 4
[ 0.120276] ... event mask: 0000000f000000ff
[ 0.120297] rcu: Hierarchical SRCU implementation.
[ 0.121340] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.121425] smp: Bringing up secondary CPUs ...
[ 0.121494] x86: Booting SMP configuration:
[ 0.121495] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.135948] smp: Brought up 1 node, 12 CPUs
[ 0.135948] smpboot: Max logical packages: 1
[ 0.135948] smpboot: Total of 12 processors activated (67392.00 BogoMIPS)
[ 0.139611] devtmpfs: initialized
[ 0.139611] x86/mm: Memory block size: 128MB
[ 0.140023] PM: Registering ACPI NVS region [mem 0x850ff000-0x852fefff] (2097152 bytes)
[ 0.140023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.140023] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.140023] pinctrl core: initialized pinctrl subsystem
[ 0.140023] PM: RTC time: 14:13:21, date: 2021-07-31
[ 0.140023] thermal_sys: Registered thermal governor 'fair_share'
[ 0.140023] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.140023] thermal_sys: Registered thermal governor 'step_wise'
[ 0.140023] thermal_sys: Registered thermal governor 'user_space'
[ 0.140023] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.140023] NET: Registered protocol family 16
[ 0.140023] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.140023] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.140028] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.140033] audit: initializing netlink subsys (disabled)
[ 0.140038] audit: type=2000 audit(1627740801.048:1): state=initialized audit_enabled=0 res=1
[ 0.140038] EISA bus registered
[ 0.140038] cpuidle: using governor ladder
[ 0.140038] cpuidle: using governor menu
[ 0.140038] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.140038] ACPI: bus type PCI registered
[ 0.140038] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.140038] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.140038] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.140038] PCI: Using configuration type 1 for base access
[ 0.143224] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.143224] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.143264] ACPI: Added _OSI(Module Device)
[ 0.143265] ACPI: Added _OSI(Processor Device)
[ 0.143265] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143266] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.143267] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.143267] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.143268] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.221739] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.231846] ACPI: Dynamic OEM Table Load:
[ 0.231857] ACPI: SSDT 0xFFFF9D10DD567E00 0001CB (v02 PmRef Cpu0Psd 00003000 INTL 20180209)
[ 0.233324] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.236143] ACPI: Dynamic OEM Table Load:
[ 0.236148] ACPI: SSDT 0xFFFF9D10DD9A0800 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20180209)
[ 0.237765] ACPI: Dynamic OEM Table Load:
[ 0.237770] ACPI: SSDT 0xFFFF9D10DD4AE000 0005C3 (v02 PmRef Cpu0Ist 00003000 INTL 20180209)
[ 0.239490] ACPI: Dynamic OEM Table Load:
[ 0.239494] ACPI: SSDT 0xFFFF9D10DD567800 000129 (v02 PmRef Cpu0Hwp 00003000 INTL 20180209)
[ 0.241336] ACPI: Dynamic OEM Table Load:
[ 0.241342] ACPI: SSDT 0xFFFF9D10DD4B1000 0008E7 (v02 PmRef ApIst 00003000 INTL 20180209)
[ 0.243150] ACPI: Dynamic OEM Table Load:
[ 0.243154] ACPI: SSDT 0xFFFF9D10DD4AF800 00048A (v02 PmRef ApHwp 00003000 INTL 20180209)
[ 0.244862] ACPI: Dynamic OEM Table Load:
[ 0.244866] ACPI: SSDT 0xFFFF9D10DD4AB000 0004D4 (v02 PmRef ApPsd 00003000 INTL 20180209)
[ 0.246558] ACPI: Dynamic OEM Table Load:
[ 0.246563] ACPI: SSDT 0xFFFF9D10DD4AC000 00048A (v02 PmRef ApCst 00003000 INTL 20180209)
[ 0.257170] ACPI: Interpreter enabled
[ 0.257223] ACPI: (supports S0 S3 S4 S5)
[ 0.257223] ACPI: Using IOAPIC for interrupt routing
[ 0.257271] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.259653] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.288455] ACPI: Power Resource [WRST] (on)
[ 0.288776] ACPI: Power Resource [V0PR] (on)
[ 0.288936] ACPI: Power Resource [V1PR] (on)
[ 0.289086] ACPI: Power Resource [V2PR] (on)
[ 0.304210] ACPI: Power Resource [FN00] (off)
[ 0.304298] ACPI: Power Resource [FN01] (off)
[ 0.304381] ACPI: Power Resource [FN02] (off)
[ 0.304464] ACPI: Power Resource [FN03] (off)
[ 0.304548] ACPI: Power Resource [FN04] (off)
[ 0.305453] ACPI: Power Resource [PIN] (off)
[ 0.305772] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[ 0.305778] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.305991] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.306191] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.306192] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.307445] PCI host bridge to bus 0000:00
[ 0.307446] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.307447] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.307448] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.307449] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.307450] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.307451] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.307452] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.307452] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.307453] pci_bus 0000:00: root bus resource [mem 0x8f800000-0xdfffffff window]
[ 0.307454] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.307463] pci 0000:00:00.0: [8086:4c53] type 00 class 0x060000
[ 0.308148] pci 0000:00:02.0: [8086:4c8a] type 00 class 0x030000
[ 0.308161] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.308168] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.308173] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.308190] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.308191] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[ 0.308447] pci 0000:00:08.0: [8086:4c11] type 00 class 0x088000
[ 0.308459] pci 0000:00:08.0: reg 0x10: [mem 0xa141f000-0xa141ffff 64bit]
[ 0.308719] pci 0000:00:14.0: [8086:43ed] type 00 class 0x0c0330
[ 0.308746] pci 0000:00:14.0: reg 0x10: [mem 0xa1400000-0xa140ffff 64bit]
[ 0.308828] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.309394] pci 0000:00:14.2: [8086:43ef] type 00 class 0x050000
[ 0.309419] pci 0000:00:14.2: reg 0x10: [mem 0xa1414000-0xa1417fff 64bit]
[ 0.309433] pci 0000:00:14.2: reg 0x18: [mem 0xa141e000-0xa141efff 64bit]
[ 0.309705] pci 0000:00:16.0: [8086:43e0] type 00 class 0x078000
[ 0.309735] pci 0000:00:16.0: reg 0x10: [mem 0xa141d000-0xa141dfff 64bit]
[ 0.309819] pci 0000:00:16.0: PME# supported from D3hot
[ 0.310133] pci 0000:00:17.0: [8086:43d2] type 00 class 0x010601
[ 0.310154] pci 0000:00:17.0: reg 0x10: [mem 0xa1418000-0xa1419fff]
[ 0.310163] pci 0000:00:17.0: reg 0x14: [mem 0xa141c000-0xa141c0ff]
[ 0.310171] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097]
[ 0.310180] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083]
[ 0.310188] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
[ 0.310197] pci 0000:00:17.0: reg 0x24: [mem 0xa141b000-0xa141b7ff]
[ 0.310243] pci 0000:00:17.0: PME# supported from D3hot
[ 0.310573] pci 0000:00:1c.0: [8086:43b8] type 01 class 0x060400
[ 0.310684] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.310997] pci 0000:00:1c.4: [8086:43bc] type 01 class 0x060400
[ 0.311109] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.311138] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[ 0.311450] pci 0000:00:1d.0: [8086:43b0] type 01 class 0x060400
[ 0.311562] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.311590] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.311913] pci 0000:00:1f.0: [8086:4385] type 00 class 0x060100
[ 0.312260] pci 0000:00:1f.3: [8086:43c8] type 00 class 0x040300
[ 0.312314] pci 0000:00:1f.3: reg 0x10: [mem 0xa1410000-0xa1413fff 64bit]
[ 0.312366] pci 0000:00:1f.3: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
[ 0.312471] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.312785] pci 0000:00:1f.4: [8086:43a3] type 00 class 0x0c0500
[ 0.312812] pci 0000:00:1f.4: reg 0x10: [mem 0xa141a000-0xa141a0ff 64bit]
[ 0.312842] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.313105] pci 0000:00:1f.5: [8086:43a4] type 00 class 0x0c8000
[ 0.313125] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.313442] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.313522] pci 0000:02:00.0: [8086:15f3] type 00 class 0x020000
[ 0.313553] pci 0000:02:00.0: reg 0x10: [mem 0xa1100000-0xa11fffff]
[ 0.313578] pci 0000:02:00.0: reg 0x1c: [mem 0xa1200000-0xa1203fff]
[ 0.313705] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.313842] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.313847] pci 0000:00:1c.4: bridge window [mem 0xa1100000-0xa12fffff]
[ 0.313918] pci 0000:03:00.0: [126f:2263] type 00 class 0x010802
[ 0.313956] pci 0000:03:00.0: reg 0x10: [mem 0xa1300000-0xa1303fff 64bit]
[ 0.314220] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.314224] pci 0000:00:1d.0: bridge window [mem 0xa1300000-0xa13fffff]
[ 0.316990] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.317097] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[ 0.317203] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.317308] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.317413] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.317518] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.317624] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.317729] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.319050] iommu: Default domain type: Translated
[ 0.319050] SCSI subsystem initialized
[ 0.319050] libata version 3.00 loaded.
[ 0.319210] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.319211] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.319214] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.319214] vgaarb: loaded
[ 0.319226] ACPI: bus type USB registered
[ 0.319235] usbcore: registered new interface driver usbfs
[ 0.319239] usbcore: registered new interface driver hub
[ 0.319244] usbcore: registered new device driver usb
[ 0.319258] pps_core: LinuxPPS API ver. 1 registered
[ 0.319258] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.319260] PTP clock support registered
[ 0.319270] EDAC MC: Ver: 3.0.0
[ 0.319288] Registered efivars operations
[ 0.319288] NetLabel: Initializing
[ 0.319288] NetLabel: domain hash size = 128
[ 0.319288] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.319298] NetLabel: unlabeled traffic allowed by default
[ 0.319305] PCI: Using ACPI for IRQ routing
[ 0.342201] PCI: pci_cache_line_size set to 64 bytes
[ 0.342239] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 0.342270] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.342271] e820: reserve RAM buffer [mem 0x7e730018-0x7fffffff]
[ 0.342272] e820: reserve RAM buffer [mem 0x7e7e9000-0x7fffffff]
[ 0.342273] e820: reserve RAM buffer [mem 0x7ffe3000-0x7fffffff]
[ 0.342273] e820: reserve RAM buffer [mem 0x81142000-0x83ffffff]
[ 0.342274] e820: reserve RAM buffer [mem 0x849ff000-0x87ffffff]
[ 0.342275] e820: reserve RAM buffer [mem 0x86000000-0x87ffffff]
[ 0.342275] e820: reserve RAM buffer [mem 0x470800000-0x473ffffff]
[ 0.342278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.342278] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.345253] clocksource: Switched to clocksource tsc-early
[ 0.353326] VFS: Disk quotas dquot_6.6.0
[ 0.353337] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.353411] AppArmor: AppArmor Filesystem Enabled
[ 0.353430] pnp: PnP ACPI init
[ 0.353688] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.353689] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.353690] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.353694] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.354317] pnp 00:01: [dma 0 disabled]
[ 0.354345] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.354493] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.354494] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.354496] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.354619] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.354621] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.356178] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.356179] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 0.356180] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 0.356183] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.356183] system 00:04: [mem 0xfed20000-0xfed7ffff] has been reserved
[ 0.356184] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.356185] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.356186] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.356189] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.357147] system 00:05: [io 0x1800-0x18fe] could not be reserved
[ 0.357148] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.357149] system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved
[ 0.357150] system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved
[ 0.357151] system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[ 0.357153] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.357153] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.357154] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved
[ 0.357155] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.357156] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.357158] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.357499] system 00:06: [io 0x2000-0x20fe] has been reserved
[ 0.357501] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.357966] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358300] pnp: PnP ACPI: found 8 devices
[ 0.363653] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.363694] NET: Registered protocol family 2
[ 0.363849] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.364983] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.365060] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.365231] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.365295] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.365365] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.365400] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.365448] NET: Registered protocol family 1
[ 0.365452] NET: Registered protocol family 44
[ 0.365462] pci 0000:00:1f.5: BAR 0: assigned [mem 0x8f800000-0x8f800fff]
[ 0.365476] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.365492] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.365496] pci 0000:00:1c.4: bridge window [mem 0xa1100000-0xa12fffff]
[ 0.365503] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.365506] pci 0000:00:1d.0: bridge window [mem 0xa1300000-0xa13fffff]
[ 0.365514] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.365515] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.365515] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.365516] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[ 0.365517] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[ 0.365517] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
[ 0.365518] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
[ 0.365519] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
[ 0.365519] pci_bus 0000:00: resource 12 [mem 0x8f800000-0xdfffffff window]
[ 0.365520] pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa12fffff]
[ 0.365521] pci_bus 0000:03: resource 1 [mem 0xa1300000-0xa13fffff]
[ 0.365693] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.366024] PCI: CLS 64 bytes, default 64
[ 0.366056] Trying to unpack rootfs image as initramfs...
[ 0.460561] Freeing initrd memory: 53540K
[ 0.460597] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.460599] software IO TLB: mapped [mem 0x7a730000-0x7e730000] (64MB)
[ 0.460637] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[ 0.460658] clocksource: Switched to clocksource tsc
[ 0.460686] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.460864] check: Scanning for low memory corruption every 60 seconds
[ 0.461171] Initialise system trusted keyrings
[ 0.461179] Key type blacklist registered
[ 0.461197] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.462031] zbud: loaded
[ 0.462204] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.462303] fuse: init (API version 7.31)
[ 0.462402] integrity: Platform Keyring initialized
[ 0.472205] Key type asymmetric registered
[ 0.472206] Asymmetric key parser 'x509' registered
[ 0.472211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.472233] io scheduler mq-deadline registered
[ 0.472787] pcieport 0000:00:1c.4: AER: enabled with IRQ 121
[ 0.472820] pcieport 0000:00:1c.4: DPC: enabled with IRQ 121
[ 0.472821] pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.473088] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[ 0.473117] pcieport 0000:00:1d.0: DPC: enabled with IRQ 122
[ 0.473118] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.473206] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.473244] efifb: probing for efifb
[ 0.473268] efifb: showing boot graphics
[ 0.474484] efifb: framebuffer at 0x90000000, using 8100k, total 8100k
[ 0.474485] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.474485] efifb: scrolling: redraw
[ 0.474486] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.474514] fbcon: Deferring console take-over
[ 0.474514] fb0: EFI VGA frame buffer device
[ 0.474520] intel_idle: MWAIT substates: 0x11121020
[ 0.474784] Monitor-Mwait will be used to enter C-1 state
[ 0.474786] Monitor-Mwait will be used to enter C-2 state
[ 0.474788] ACPI: \_SB_.PR00: Found 2 idle states
[ 0.474789] intel_idle: v0.5.1 model 0xA7
[ 0.475014] intel_idle: Local APIC timer is reliable in all C-states
[ 0.475189] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.475205] ACPI: Sleep Button [SLPB]
[ 0.475265] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.475275] ACPI: Power Button [PWRB]
[ 0.475293] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.475312] ACPI: Power Button [PWRF]
[ 0.477774] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.477775] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.477933] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.499836] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.503406] Linux agpgart interface v0.103
[ 0.505457] loop: module loaded
[ 0.505638] libphy: Fixed MDIO Bus: probed
[ 0.505639] tun: Universal TUN/TAP device driver, 1.6
[ 0.505655] PPP generic driver version 2.4.2
[ 0.505682] VFIO - User Level meta-driver version: 0.3
[ 0.505749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.505751] ehci-pci: EHCI PCI platform driver
[ 0.505756] ehci-platform: EHCI generic platform driver
[ 0.505763] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.505764] ohci-pci: OHCI PCI platform driver
[ 0.505769] ohci-platform: OHCI generic platform driver
[ 0.505773] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.505795] i8042: PNP: No PS/2 controller found.
[ 0.505822] mousedev: PS/2 mouse device common for all mice
[ 0.505905] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.506509] rtc_cmos rtc_cmos: registered as rtc0
[ 0.506682] rtc_cmos rtc_cmos: setting system clock to 2021-07-31T14:13:21 UTC (1627740801)
[ 0.506691] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.506695] i2c /dev entries driver
[ 0.506723] device-mapper: uevent: version 1.0.3
[ 0.506753] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 0.506764] platform eisa.0: Probing EISA bus 0
[ 0.506765] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.506766] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.506767] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.506767] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.506768] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.506768] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.506769] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.506769] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.506770] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.506771] platform eisa.0: EISA: Detected 0 cards
[ 0.506774] intel_pstate: Intel P-state driver initializing
[ 0.507542] intel_pstate: HWP enabled
[ 0.507690] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.507693] EFI Variables Facility v0.08 2004-May-17
[ 0.515634] drop_monitor: Initializing network drop monitor service
[ 0.515715] NET: Registered protocol family 10
[ 0.518131] Segment Routing with IPv6
[ 0.518144] NET: Registered protocol family 17
[ 0.518164] Key type dns_resolver registered
[ 0.518714] microcode: sig=0xa0671, pf=0x2, revision=0x40
[ 0.518840] microcode: Microcode Update Driver: v2.2.
[ 0.518843] IPI shorthand broadcast: enabled
[ 0.518847] sched_clock: Marking stable (518298735, 539424)->(524871372, -6033213)
[ 0.518931] registered taskstats version 1
[ 0.518937] Loading compiled-in X.509 certificates
[ 0.519279] Loaded X.509 cert 'Build time autogenerated kernel key: 6af17e88d143a5e927cc9982b97b8e933a9d694e'
[ 0.519570] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.519856] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.519881] zswap: loaded using pool lzo/zbud
[ 0.519963] Key type ._fscrypt registered
[ 0.519963] Key type .fscrypt registered
[ 0.519964] Key type fscrypt-provisioning registered
[ 0.521055] Key type encrypted registered
[ 0.521056] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.521319] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 0.521329] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[ 0.521329] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 0.521449] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.521514] ima: No TPM chip found, activating TPM-bypass!
[ 0.521516] ima: Allocated hash algorithm: sha1
[ 0.521519] ima: No architecture policies found
[ 0.521523] evm: Initialising EVM extended attributes:
[ 0.521523] evm: security.selinux
[ 0.521523] evm: security.SMACK64
[ 0.521523] evm: security.SMACK64EXEC
[ 0.521524] evm: security.SMACK64TRANSMUTE
[ 0.521524] evm: security.SMACK64MMAP
[ 0.521524] evm: security.apparmor
[ 0.521524] evm: security.ima
[ 0.521524] evm: security.capability
[ 0.521525] evm: HMAC attrs: 0x1
[ 0.522445] PM: Magic number: 13:987:233
[ 0.522484] acpi device:4d: hash matches
[ 0.522497] memory memory111: hash matches
[ 0.522544] RAS: Correctable Errors collector initialized.
[ 0.525197] Freeing unused decrypted memory: 2040K
[ 0.525518] Freeing unused kernel image (initmem) memory: 2648K
[ 0.547347] Write protecting the kernel read-only data: 22528k
[ 0.548619] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 0.548977] Freeing unused kernel image (rodata/data gap) memory: 688K
[ 0.568355] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.568358] Run /init as init process
[ 0.568359] with arguments:
[ 0.568360] /init
[ 0.568360] splash
[ 0.568361] with environment:
[ 0.568361] HOME=/
[ 0.568361] TERM=linux
[ 0.568362] BOOT_IMAGE=/boot/vmlinuz-5.8.0-63-generic
[ 0.610549] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 0.610609] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 0.617970] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.617974] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.618181] Intel(R) 2.5G Ethernet Linux Driver - version 0.0.1-k
[ 0.618181] Copyright(c) 2018 Intel Corporation.
[ 0.618186] ahci 0000:00:17.0: version 3.0
[ 0.618208] igc 0000:02:00.0: enabling device (0000 -> 0002)
[ 0.618517] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.618519] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds
[ 0.619093] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000000009810
[ 0.619100] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.619256] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.619805] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.619806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.619807] usb usb1: Product: xHCI Host Controller
[ 0.619808] usb usb1: Manufacturer: Linux 5.8.0-63-generic xhci-hcd
[ 0.619809] usb usb1: SerialNumber: 0000:00:14.0
[ 0.619926] nvme nvme0: pci function 0000:03:00.0
[ 0.620038] hub 1-0:1.0: USB hub found
[ 0.620100] hub 1-0:1.0: 16 ports detected
[ 0.623886] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 0.624396] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.624399] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.624401] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
[ 0.624435] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 0.624436] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.624436] usb usb2: Product: xHCI Host Controller
[ 0.624437] usb usb2: Manufacturer: Linux 5.8.0-63-generic xhci-hcd
[ 0.624438] usb usb2: SerialNumber: 0000:00:14.0
[ 0.624505] hub 2-0:1.0: USB hub found
[ 0.624523] hub 2-0:1.0: 9 ports detected
[ 0.624736] usb: port power management may be unreliable
[ 0.624798] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 0.625712] i2c i2c-0: Successfully instantiated SPD at 0x53
[ 0.635099] nvme nvme0: allocated 64 MiB host memory buffer.
[ 0.661204] nvme nvme0: 12/0/0 default/read/poll queues
[ 0.668318] igc 0000:02:00.0 (unnamed net_device) (uninitialized): PHC added
[ 0.668348] nvme0n1: p1 p2
[ 0.676448] scsi host0: ahci
[ 0.676883] scsi host1: ahci
[ 0.677202] scsi host2: ahci
[ 0.677431] scsi host3: ahci
[ 0.677672] scsi host4: ahci
[ 0.677936] scsi host5: ahci
[ 0.677994] ata1: SATA max UDMA/133 abar m2048@0xa141b000 port 0xa141b100 irq 123
[ 0.677997] ata2: SATA max UDMA/133 abar m2048@0xa141b000 port 0xa141b180 irq 123
[ 0.677999] ata3: SATA max UDMA/133 abar m2048@0xa141b000 port 0xa141b200 irq 123
[ 0.678001] ata4: SATA max UDMA/133 abar m2048@0xa141b000 port 0xa141b280 irq 123
[ 0.678003] ata5: SATA max UDMA/133 abar m2048@0xa141b000 port 0xa141b300 irq 123
[ 0.678005] ata6: SATA max UDMA/133 abar m2048@0xa141b000 port 0xa141b380 irq 123
[ 0.726991] igc 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[ 0.726996] igc 0000:02:00.0 eth0: MAC: d8:bb:c1:06:ca:fd
[ 0.741245] igc 0000:02:00.0 enp2s0: renamed from eth0
[ 0.959289] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 0.990409] ata1: SATA link down (SStatus 4 SControl 300)
[ 0.994562] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.994596] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.994630] ata3: SATA link down (SStatus 4 SControl 300)
[ 0.994663] ata4: SATA link down (SStatus 4 SControl 300)
[ 0.994697] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.031772] ata5.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 1.031777] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.031787] ata6.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 1.031791] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.091528] ata5.00: configured for UDMA/133
[ 1.091553] ata6.00: configured for UDMA/133
[ 1.091845] scsi 4:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 1.092249] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 1.092287] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.092291] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 1.092303] sd 4:0:0:0: [sda] Write Protect is off
[ 1.092306] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.092326] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.092693] scsi 5:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 1.093086] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1.093140] sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.093144] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 1.093159] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.093162] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.093185] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.108413] usb 1-2: New USB device found, idVendor=1462, idProduct=7d09, bcdDevice= 0.01
[ 1.108417] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.108420] usb 1-2: Product: MYSTIC LIGHT
[ 1.108422] usb 1-2: Manufacturer: MSI
[ 1.108424] usb 1-2: SerialNumber: A0202001110f
[ 1.112814] sdb: sdb1
[ 1.113545] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.114682] sda: sda1
[ 1.115429] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.229421] md/raid1:md0: active with 2 out of 2 mirrors
[ 1.235350] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.260906] md0: detected capacity change from 0 to 2000262594560
[ 1.385112] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
[ 1.385116] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.385119] usb 1-4: Product: USB2.0 Hub
[ 1.386558] hub 1-4:1.0: USB hub found
[ 1.386949] hub 1-4:1.0: 4 ports detected
[ 1.519288] usb 1-12: new full-speed USB device number 4 using xhci_hcd
[ 1.670715] usb 1-12: New USB device found, idVendor=0b05, idProduct=17cb, bcdDevice= 1.12
[ 1.670719] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.670721] usb 1-12: Product: BCM20702A0
[ 1.670723] usb 1-12: Manufacturer: Broadcom Corp
[ 1.670725] usb 1-12: SerialNumber: 5CF3708291BC
[ 1.747292] usb 1-4.1: new low-speed USB device number 5 using xhci_hcd
[ 1.853398] usb 1-4.1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[ 1.853402] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.853405] usb 1-4.1: Product: USB Keyboard
[ 1.853407] usb 1-4.1: Manufacturer: Logitech
[ 1.975291] usb 1-13: new high-speed USB device number 6 using xhci_hcd
[ 2.125126] usb 1-13: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
[ 2.125130] usb 1-13: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.125133] usb 1-13: Product: USB2.0 Hub
[ 2.126658] hub 1-13:1.0: USB hub found
[ 2.127005] hub 1-13:1.0: 4 ports detected
[ 2.137617] hid: raw HID events driver (C) Jiri Kosina
[ 2.146200] usbcore: registered new interface driver usbhid
[ 2.146202] usbhid: USB HID core driver
[ 2.151326] input: MSI MYSTIC LIGHT as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1462:7D09.0001/input/input3
[ 2.151924] hid-generic 0003:1462:7D09.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:00:14.0-2/input0
[ 2.152252] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:046D:C31C.0002/input/input4
[ 2.203297] usb 1-4.2: new low-speed USB device number 7 using xhci_hcd
[ 2.211709] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-4.1/input0
[ 2.212004] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C31C.0003/input/input5
[ 2.271571] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C31C.0003/input/input6
[ 2.271961] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-4.1/input1
[ 2.307801] usb 1-4.2: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=63.00
[ 2.307805] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.307808] usb 1-4.2: Product: USB Optical Mouse
[ 2.307810] usb 1-4.2: Manufacturer: Logitech
[ 2.313500] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:046D:C05A.0004/input/input7
[ 2.313809] hid-generic 0003:046D:C05A.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-4.2/input0
[ 2.419245] raid6: avx512x4 gen() 71093 MB/s
[ 2.487248] raid6: avx512x4 xor() 21216 MB/s
[ 2.555243] raid6: avx512x2 gen() 77813 MB/s
[ 2.623243] raid6: avx512x2 xor() 45842 MB/s
[ 2.691253] raid6: avx512x1 gen() 73797 MB/s
[ 2.759243] raid6: avx512x1 xor() 42411 MB/s
[ 2.827254] raid6: avx2x4 gen() 62244 MB/s
[ 2.895243] raid6: avx2x4 xor() 19784 MB/s
[ 2.963246] raid6: avx2x2 gen() 62567 MB/s
[ 3.031243] raid6: avx2x2 xor() 36178 MB/s
[ 3.099254] raid6: avx2x1 gen() 48177 MB/s
[ 3.167243] raid6: avx2x1 xor() 28791 MB/s
[ 3.235253] raid6: sse2x4 gen() 16825 MB/s
[ 3.303244] raid6: sse2x4 xor() 8881 MB/s
[ 3.371251] raid6: sse2x2 gen() 17542 MB/s
[ 3.439243] raid6: sse2x2 xor() 10909 MB/s
[ 3.507253] raid6: sse2x1 gen() 16421 MB/s
[ 3.575244] raid6: sse2x1 xor() 8672 MB/s
[ 3.575244] raid6: using algorithm avx512x2 gen() 77813 MB/s
[ 3.575244] raid6: .... xor() 45842 MB/s, rmw enabled
[ 3.575245] raid6: using avx512x2 recovery algorithm
[ 3.575754] xor: automatically using best checksumming function avx
[ 3.576313] async_tx: api initialized (async)
[ 3.596508] fbcon: Taking over console
[ 3.596535] Console: switching to colour frame buffer device 240x67
[ 3.600961] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.676926] systemd[1]: Inserted module 'autofs4'
[ 3.704080] systemd[1]: systemd 245.4-4ubuntu3.11 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.723587] systemd[1]: Detected architecture x86-64.
[ 3.744917] systemd[1]: Set hostname to <fabien-tour>.
[ 3.843165] systemd[1]: Created slice system-modprobe.slice.
[ 3.843305] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.843380] systemd[1]: Created slice User and Session Slice.
[ 3.843403] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.843464] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.843483] systemd[1]: Reached target User and Group Name Lookups.
[ 3.843488] systemd[1]: Reached target Remote File Systems.
[ 3.843491] systemd[1]: Reached target Slices.
[ 3.844353] systemd[1]: Listening on Syslog Socket.
[ 3.844383] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.844400] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.844456] systemd[1]: Listening on Journal Audit Socket.
[ 3.844482] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.844509] systemd[1]: Listening on Journal Socket.
[ 3.844538] systemd[1]: Listening on udev Control Socket.
[ 3.844558] systemd[1]: Listening on udev Kernel Socket.
[ 3.844884] systemd[1]: Mounting Huge Pages File System...
[ 3.845213] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.845565] systemd[1]: Mounting Kernel Debug File System...
[ 3.845903] systemd[1]: Mounting Kernel Trace File System...
[ 3.846507] systemd[1]: Starting Journal Service...
[ 3.846863] systemd[1]: Starting Set the console keyboard layout...
[ 3.847308] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.847675] systemd[1]: Starting Load Kernel Module drm...
[ 3.848235] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.848252] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 3.849915] systemd[1]: Starting Load Kernel Modules...
[ 3.850226] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.850559] systemd[1]: Starting udev Coldplug all Devices...
[ 3.850899] systemd[1]: Starting Uncomplicated firewall...
[ 3.851577] systemd[1]: Mounted Huge Pages File System.
[ 3.851630] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.851670] systemd[1]: Mounted Kernel Debug File System.
[ 3.851714] systemd[1]: Mounted Kernel Trace File System.
[ 3.851900] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.853795] systemd[1]: Finished Uncomplicated firewall.
[ 3.855122] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[ 3.855732] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.856094] systemd[1]: Activating swap /swapfile...
[ 3.856318] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 3.856342] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.856778] systemd[1]: Starting Load/Save Random Seed...
[ 3.857158] systemd[1]: Starting Create System Users...
[ 3.857331] systemd[1]: modprobe@drm.service: Succeeded.
[ 3.857559] systemd[1]: Finished Load Kernel Module drm.
[ 3.859615] lp: driver loaded but no devices found
[ 3.861612] ppdev: user-space parallel port driver
[ 3.864488] systemd[1]: Finished Load Kernel Modules.
[ 3.864909] systemd[1]: Mounting FUSE Control File System...
[ 3.865405] systemd[1]: Mounting Kernel Configuration File System...
[ 3.865809] systemd[1]: Starting Apply Kernel Variables...
[ 3.866189] systemd[1]: Finished Load/Save Random Seed.
[ 3.866616] systemd[1]: Mounted FUSE Control File System.
[ 3.866660] systemd[1]: Mounted Kernel Configuration File System.
[ 3.867413] systemd[1]: Finished Create System Users.
[ 3.867910] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.873155] systemd[1]: Finished Apply Kernel Variables.
[ 3.874825] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.875261] systemd[1]: Starting udev Kernel Device Manager...
[ 3.877185] systemd[1]: Started Journal Service.
[ 3.879838] systemd-journald[370]: Received client request to flush runtime journal.
[ 3.899268] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 4.064023] pstore: Using crash dump compression: deflate
[ 4.064040] pstore: Registered efi as persistent store backend
[ 4.064206] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 4.064802] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 4.065457] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 4.065534] cryptd: max_cpu_qlen set to 1000
[ 4.071896] AVX2 version of gcm_enc/dec engaged.
[ 4.071897] AES CTR mode by8 optimization enabled
[ 4.074101] Bluetooth: Core ver 2.22
[ 4.074124] NET: Registered protocol family 31
[ 4.074125] Bluetooth: HCI device and connection manager initialized
[ 4.074128] Bluetooth: HCI socket layer initialized
[ 4.074129] Bluetooth: L2CAP socket layer initialized
[ 4.074130] Bluetooth: SCO socket layer initialized
[ 4.080386] usbcore: registered new interface driver btusb
[ 4.147469] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 4.188982] Bluetooth: hci0: BCM: chip id 63
[ 4.189981] Bluetooth: hci0: BCM: features 0x07
[ 4.206027] Bluetooth: hci0: BCM20702A
[ 4.206030] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 4.207771] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 4.207775] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0b05-17cb.hcd'
[ 4.207777] Bluetooth: hci0: BCM: 'brcm/BCM-0b05-17cb.hcd'
[ 4.628975] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.648539] audit: type=1400 audit(1627740805.639:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=755 comm="apparmor_parser"
[ 4.648542] audit: type=1400 audit(1627740805.639:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=746 comm="apparmor_parser"
[ 4.648544] audit: type=1400 audit(1627740805.639:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=752 comm="apparmor_parser"
[ 4.648545] audit: type=1400 audit(1627740805.639:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=748 comm="apparmor_parser"
[ 4.648547] audit: type=1400 audit(1627740805.639:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=748 comm="apparmor_parser"
[ 4.648594] audit: type=1400 audit(1627740805.639:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=747 comm="apparmor_parser"
[ 4.649024] audit: type=1400 audit(1627740805.639:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=760 comm="apparmor_parser"
[ 4.649523] audit: type=1400 audit(1627740805.639:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=750 comm="apparmor_parser"
[ 4.649524] audit: type=1400 audit(1627740805.639:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=750 comm="apparmor_parser"
[ 4.879193] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.879194] Bluetooth: BNEP filters: protocol multicast
[ 4.879196] Bluetooth: BNEP socket layer initialized
[ 4.885103] NET: Registered protocol family 38
[ 7.969306] igc 0000:02:00.0 enp2s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 7.970535] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 16.548527] rfkill: input handler disabled
[ 21.291086] Bluetooth: RFCOMM TTY layer initialized
[ 21.291090] Bluetooth: RFCOMM socket layer initialized
[ 21.291093] Bluetooth: RFCOMM ver 1.11
[ 21.468067] rfkill: input handler enabled
[ 26.579679] rfkill: input handler disabled
[ 26.862077] kauditd_printk_skb: 29 callbacks suppressed
[ 26.862079] audit: type=1400 audit(1627740827.851:40): apparmor="DENIED" operation="capable" profile="/snap/snapd/12704/usr/lib/snapd/snap-confine" pid=2206 comm="snap-confine" capability=4 capname="fsetid"
[ 28.203504] audit: type=1326 audit(1627740829.195:41): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=2206 comm="snap-store" exe="/snap/snap-store/547/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7ff55424e639 code=0x50000
[ 51.732884] audit: type=1107 audit(1627740852.901:42): pid=788 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.11" pid=2206 label="snap.snap-store.ubuntu-software" peer_pid=800 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 51.733251] audit: type=1107 audit(1627740852.901:43): pid=788 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.11" pid=2206 label="snap.snap-store.ubuntu-software" peer_pid=800 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 51.830956] audit: type=1107 audit(1627740853.001:44): pid=788 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.11" pid=2206 label="snap.snap-store.ubuntu-software" peer_pid=800 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 51.831084] audit: type=1107 audit(1627740853.001:45): pid=788 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.11" pid=2206 label="snap.snap-store.ubuntu-software" peer_pid=800 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 52.224273] audit: type=1400 audit(1627740853.394:46): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=2206 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 64.372480] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component
[ 64.390317] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 64.390318] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 64.390318] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 64.390319] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 64.390319] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 64.390320] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 64.390320] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 64.390321] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 64.414009] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[ 64.414182] hdaudio hdaudioC0D2: Unable to bind the codec
[ 64.414366] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 64.414426] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 64.414458] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 64.414489] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 64.414597] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 64.414633] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 64.414654] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 64.414675] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 64.422594] snd_hda_intel 0000:00:1f.3: control 2:0:0:Digital Capture Volume:0 is already presentJ'ai testé en live-session avec ubuntu 21.04, et le problème demeure.
Ubuntu 20.04 (64 bits)
Hors ligne
#33 Le 31/07/2021, à 19:06
- jlc62
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
@Nuliel : je suis tenté par l'installation de noyau plus récent (le mien est 5.8 et mainline propose jusqu'au 5.13) mais je ne sais pas trop comment faire :
- j'installe un nouveau noyau et je redémarre ? (ubuntu choisi automatiquement le noyau le plus récent ?)
- comment revenir en arrière si ça déconne ? (notamment si ça ne démarre pas...)
Merci !
Ubuntu 20.04 (64 bits)
Hors ligne
#34 Le 31/07/2021, à 19:28
- Nuliel
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Je mets ici les trucs que je ne connais pas et qui pourrait être lié au pb:
[ 0.342239] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 0.472787] pcieport 0000:00:1c.4: AER: enabled with IRQ 121
[ 0.472820] pcieport 0000:00:1c.4: DPC: enabled with IRQ 121
[ 0.472821] pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.473088] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[ 0.473117] pcieport 0000:00:1d.0: DPC: enabled with IRQ 122
[ 0.473118] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+N'installe pas de noyau ayant rc (release candidate) dans le nom. Je te laisse suivre https://doc.ubuntu-fr.org/mainline pour installer le noyau plus récent, à noter que tu pourras choisir dans le menu grub si tu veux démarrer sur le noyau 5.8 (par défaut linux boote sur le noyau le plus récent)
Hors ligne
#35 Le 31/07/2021, à 19:57
- xubu1957
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
@Nuliel
Il y avait ces retours dans ce fil > /viewtopic.php?id=2050818
1.915069] pcieport 0000:00:1d.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 1.915427] pcieport 0000:00:1d.4: PME: Signaling with IRQ 124
[ 1.915488] pcieport 0000:00:1d.4: AER: enabled with IRQ 124
[ 1.915542] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+_ _ _
@jlc62
Fournis :
dmesg | grep edidvu > Forcer un edid custom au boot
et proposé dans > [resolu] Dell 5406 - Pas de multi-écran + pb pad
Dernière modification par xubu1957 (Le 31/07/2021, à 20:04)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#36 Le 31/07/2021, à 21:54
- jlc62
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
@xubu1957 :
Pas de réponse à : dmesg | grep edid
Sinon, j'ai testé les versions de noyau jusqu'à la plus récente et les deux écrans sont reconnus 
à partir de la dernière seulement !
fabien@fabien-tour:~$ uname -mr
5.13.6-051306-generic x86_64Je retrouve alors un comportement normal à deux écrans et un sous-menu de paramètres habituel ::D:D:D
Par contre, à l'installation du noyau, il est fait mention de dépendances non satisfaites et j'ai un panneau "sens interdit" dans la barre en haut à droite me le rappelant.
fabien@fabien-tour:~$ sudo apt-get upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Vous pouvez lancer « apt --fix-broken install » pour corriger ces problèmes.
Les paquets suivants contiennent des dépendances non satisfaites :
linux-headers-5.13.6-051306-generic : Dépend: libc6 (>= 2.33) mais 2.31-0ubuntu9.2 est installé
E: Dépendances non satisfaites. Essayez « apt --fix-broken install » sans paquet
(ou indiquez une solution).Je comprends qu'il faut une librairie plus récente... pourquoi n'est-elle pas automatiquement mise à jour ?
J'écris la commande suggérée :
fabien@fabien-tour:~$ sudo apt --fix-broken install
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Correction des dépendances... Fait
Les paquets suivants seront ENLEVÉS :
linux-headers-5.13.6-051306-generic
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
1 partiellement installés ou enlevés.
Après cette opération, 24,8 Mo d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] 
Il propose de supprimer le fichier qui nécessite la librairie ? C'est pas un peu dangereux ça ? Ne vais-je pas revenir à la case départ ?
Dernière modification par jlc62 (Le 31/07/2021, à 21:56)
Ubuntu 20.04 (64 bits)
Hors ligne
#37 Le 31/07/2021, à 22:01
- xubu1957
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Vu > askubuntu.com/questions/1315906/unmet-dependencies-libc6-the-package-system-is-broken
indiquant :
sudo apt install libc6=2.31-0ubuntu9.2 libc-bin=2.31-0ubuntu9.2Attends l'avis de Nuliel.
Dernière modification par xubu1957 (Le 01/08/2021, à 12:08)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#38 Le 01/08/2021, à 01:07
- jlc62
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Bonsoir,
D'après les deux lectures suivantes, il semblerait que le noyau 5.13 ne soit pas compatible avec ubuntu20.04 et qu'il faille installer 21.04 
https://askubuntu.com/questions/1351146 … ers-and-li
https://ubuntuhandbook.org/index.php/20 … -released/
J'attends l'avis de Nuliel...
Ubuntu 20.04 (64 bits)
Hors ligne
#39 Le 01/08/2021, à 10:39
- Nuliel
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Alors la libc c'est la base du système, la version demandée n'est probablement pas dans les dépôts. Les headers ne sont pas nécessaires, sauf si tu utilises des modules noyaux compilés (que ce soit pour du matériel ayant demandé un ajout de module, ou pour virtualbox/nvidia/...)
Je considère que mainline n'est qu'un logiciel pour tester si un noyau permet de résoudre un problème, ce n'est qu'une solution provisoire.
Perso je conseillerais de tester des noyaux plus anciens, jusqu'à voir à partir de quelle version les deux écrans sont supportés. En effet, cela permettrait de savoir s'il y a moyen de choper les noyaux supportant le dual screen de manière plus classique (comprendre par les dépôts). Il est aussi possible que mainline soit une solution provisoire jusqu'en octobre où va sortir la 21.10, et accessoirement une maj des noyaux du HWE normalement (c'est peut être en août pour le HWE)
Dernière modification par Nuliel (Le 01/08/2021, à 10:43)
Hors ligne
#40 Le 01/08/2021, à 11:39
- jlc62
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Merci pour ta réponse. J'ai testé les noyaux par ordre croissant et seul le 5.13 fait fonctionner le double écran.
La 21.10 devrait sortir avec un noyau 5.14 donc ça devrait aller, mais en attendant...
Ubuntu 20.04 (64 bits)
Hors ligne
#41 Le 01/08/2021, à 12:00
- Nuliel
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Je suis étonné mais oui, il devrait y avoirun noyau 5.14 sur la 21.10.
Utilises tu virtualbox, ou tout autre programme nécessitant d'ajouter un module noyau? Si non, on peut supprimer le header et attendre jusqu'en octobre pour passer à la 21.10
Hors ligne
#42 Le 01/08/2021, à 12:37
- jlc62
Re : [RESOLU] Multi-écran hdmi + displayport (processeur Intel 11th gen)
Non, je n'utilise pas virtualbox.
j'ai supprimé le header et il n'y a plus de problèmes manifestes. Je vais donc tenter de laisser ainsi en attendant la 21.10 !
Un grand merci à vous xubu1957 et Nuliel pour votre disponibilité, votre aide et vos explications ! 
Je résume le problème et sa résolution :
- Suite à l'installation d'ubuntu 20.04 LTS sur MSI Z 590-A PRO + 11th Gen Intel(R) Core(TM) i5-11600 @ 2.80GHz (sans carte graphique), impossibilité de mettre en œuvre un double écran (ports HDI + displayport)
- Diagnostic : le noyau linux 5.8 ne prend pas bien en charge le processeur graphique Intel® UHD Graphics 750 intégré au processeur
- Après test des différents noyaux disponibles par le logiciel Mainline : 5.9, 5.10, ..., le noyau 5.13 prend en charge le double écran.
- je reste sur cette version en attendant la sortie de la distribution ubuntu 21.10 basée sur un noyau linux >= 5.14.
Ubuntu 20.04 (64 bits)
Hors ligne