Ubuntu-fr

georgesgiralt

Re : Smart erreur (popup)

Ben, je l'ai déjà donné, je crois. Mais dans le doute le voici :

# smartctl  -a /dev/nvme0n1
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-27-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       SAMSUNG MZALQ256HAJD-000L2
Serial Number:                      S4ULNF2R137173
Firmware Version:                   BL2QFXV7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Total NVM Capacity:                 256060514304 [256 GB]
Unallocated NVM Capacity:           0
Controller ID:                      5
Number of Namespaces:               1
Namespace 1 Size/Capacity:          256060514304 [256 GB]
Namespace 1 Utilization:            96375177216 [96,3 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            002538 a111d7abab
Local Time is:                      Wed Jan 26 11:52:54 2022 CET
Firmware Updates (0x16):            3 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0057):     Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     82 Celsius
Critical Comp. Temp. Threshold:     85 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     4.83W       -        -    0  0  0  0        0       0
 1 +     3.54W       -        -    1  1  1  1        0       0
 2 +     3.04W       -        -    2  2  2  2        0     500
 3 -   0.0500W       -        -    3  3  3  3      210    1200
 4 -   0.0050W       -        -    4  4  4  4     1000    9000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        35 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    0%
Data Units Read:                    4357257 [2,23 TB]
Data Units Written:                 3044664 [1,55 TB]
Host Read Commands:                 48227308
Host Write Commands:                42416876
Controller Busy Time:               231
Power Cycles:                       626
Power On Hours:                     167
Unsafe Shutdowns:                   410
Media and Data Integrity Errors:    0
Error Information Log Entries:      825
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               35 Celsius

Error Information (NVMe Log 0x01, max 64 entries)
Num   ErrCount  SQId   CmdId  Status  PELoc          LBA  NSID    VS
  0        825     0  0xc018  0x4004      -            0     0     -

Le "ErrCount" a augmenté de 1 ce matin (j'ai éteint le portable hier).
Et le message est toujours le même, une occurrence en plus.