Ecrire un ISO sur une partition de clé USB

zepp · Le 14/08/2022, à 14:28

Le problème des utilitaires du genre "Créateur de disque de démarrage" c'est qu'ils écrivent nécessairement sur tout le disque / clé USB.
Je voudrais garder la deuxième partition de ma clé USB pour y sauvegarder mes fichiers.
Et sur la première partition je voudrais copier un fichier ISO afin de pouvoir booter dessus.

J'avais dans un premier temps pensé à l'utilitaire en ligne de commande *dd* mais il y a sans doute mieux à notre époque ?

diesel · Le 14/08/2022, à 14:36

Ben..., une ISO, c'est une image d'un support.

Si l'ISO en question a été créée comme image d'un support complet (dont la table de partitions), ce qui est généralement le cas des ISOs bootables, je ne sais pas comment tu vas pouvoir te débrouiller pour garder ta partition 2.

Maintenant, au prix des clés USB capable d'accueillir une ISO bootable, je vois pas pourquoi tu veux te faire ierch.

Amicalement.

Jean-Marie

geole · Le 14/08/2022, à 15:38

zepp a écrit :

Le problème des utilitaires du genre "Créateur de disque de démarrage" c'est qu'ils écrivent nécessairement sur tout le disque / clé USB.
Je voudrais garder la deuxième partition de ma clé USB pour y sauvegarder mes fichiers.
Et sur la première partition je voudrais copier un fichier ISO afin de pouvoir booter dessus.
J'avais dans un premier temps pensé à l'utilitaire en ligne de commande *dd* mais il y a sans doute mieux à notre époque ?

Bonjour
Je te prie de lire ce document.
Attention: Au moment de la création, n'oublie pas de préciser l'espace disque que tu souhaites mettre hors de contrôle de l'outil pour l'utiliser ultérieurement comme tu le souhaites.

zepp · Le 14/08/2022, à 18:39

J'ai bidouillé une bonne partie de l'après-midi, mais le résultat est un demi échec, parce que je pense que le système que j'ai testé n'est pas conçu pour tourner dans une partition. (il s'agit du dernier Raspeberry Pi Desktop)

Dommage !

MicP · Le 14/08/2022, à 18:56

Bonjour

Un fichier image ISO d'installation d'un système, tout comme un disque dur d'une machine, seront "bootables"
à condition qu'il y ait inscrit, dans leur MBR (Master Boot Record), un chargeur de boot

Pour qu'un support (disque, clefUSB, CD, etc) soit bootable,
il faut impérativement que le premier secteur de ce support contienne un MBR et qu'un chargeur de boot y ait été inscrit.

Si le fichier image ISO (contenant ce MBR et ce chargeur de boot) a été copié dans le système de fichiers d'une partition d'une clef USB (ou autre support de données)
le MBR et le chargeur de boot de ce fichier image ISO ne seront forcement pas situés dans le premier secteur de la clef USB.

geole · Le 14/08/2022, à 19:00

zepp a écrit :

Jje pense que le système que j'ai testé n'est pas conçu pour tourner dans une partition. (il s'agit du dernier Raspeberry Pi Desktop)

Il n'y a pas ce modèle dans la liste des iso testés. https://www.ventoy.net/en/isolist.html

Dernière modification par geole (Le 14/08/2022, à 19:01)

Christophe C · Le 14/08/2022, à 20:59

tu veux un live-USB "persistant" (avec possibilité d'y inscrire des données).

Si tu graves une iso, à ma connaissance, ce n'est pas possible : tous les softs que je connais utilisent alors le format ISO9660 qui verrouille la clé en lecture seule, avec une seule partition. Et ensuite tu devra supprimer la partition et reformater en FAT32 pour re-utiliser ta clé.

Ventoy ou Unetbootin font différemment : ils extraient les fichiers de l'iso, et crée un système persistant (mais ce n'est plus une ISO).

Si cela ne marche pas avec Ventoy, essaie Unetbootin. C'est celui que j'utilise. marche bien. Suit l'aide Ubuntu, elle est à jour.

Screen · Le 14/08/2022, à 21:35

oui c'est possible d'utiliser l'espace restant après avoir graver une image,
une image iso 9660 sur une clé usb, bootable bien sûr, j'ai ensuite crée une partition et formater
évidemment si je grave un nouveau iso, il va tout supprimer

gnome-disks par exemple, va indiquer que l'image sélectionnée est plus petite que le périphérique cible et laisser un espace non alloué qu'on peut réutiliser, on peut voir que gnome-disks a mis l'image iso est sur sdb1, cette clé a ensuite booter sur un système non-efi

sur un Raspeberry Pi, il me semble que c'est sur une carte sd qu'il faut graver l'image et non pas sur une cle usb.

Dernière modification par Screen (Le 14/08/2022, à 21:43)

diesel · Le 14/08/2022, à 21:56

Screen a écrit :

sur un Raspeberry Pi, il me semble que c'est sur une carte sd qu'il faut graver l'image et non pas sur une cle usb.

Oui, mais ça, c'était avant.

Aujourd'hui, un raspberry-pi modèle 4B est capable de booter sur un périphérique USB.

Amicalement.

Jean-Marie

MicP · Le 14/08/2022, à 21:58

Dans son message #8, Screen a écrit :

…oui c'est possible d'utiliser l'espace restant après avoir graver une image,
une image iso 9660 sur une clé usb, bootable bien sûr, j'ai ensuite crée une partition et formater…

Pour pouvoir créer ces deux autres partition, il a fallu que la table de partitionnement (et donc le MBR original de cette carte SD ou µSD) soit modifié.

As-tu essayé de booter pour tenter une installation de Lubuntu depuis cette carte SD ou µSD après avoir créé ces deux partitions supplémentaires pour vérifier que ce soit encore possible ?

Que le support soit une carte SD ou µSD ou une clef USB, le problème sera le même.

Dernière modification par MicP (Le 14/08/2022, à 21:58)

Screen · Le 14/08/2022, à 22:34

MicP a écrit :

Dans son message #8, Screen a écrit :
…oui c'est possible d'utiliser l'espace restant après avoir graver une image,
une image iso 9660 sur une clé usb, bootable bien sûr, j'ai ensuite crée une partition et formater…
Pour pouvoir créer ces deux autres partition, il a fallu que la table de partitionnement (et donc le MBR original de cette carte SD ou µSD) soit modifié.
As-tu essayé de booter pour tenter une installation de Lubuntu depuis cette carte SD ou µSD après avoir créé ces deux partitions supplémentaires pour vérifier que ce soit encore possible ?
Que le support soit une carte SD ou µSD ou une clef USB, le problème sera le même.

bien sûr, ma cle usb peut booter et installer, efi ou non efi, sans quoi je ne me serais pas permis de venir témoigner.

mais regarde bien le type de partitionnement et tu va comprendre tout de suite pour répondre à ta question
sdb1 est l'emplacement de l'image iso 9660

Disque /dev/sdb : 14,41 GiB, 15472047104 octets, 30218842 secteurs
Modèle de disque : DataTraveler 3.0
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 11EAFB5B-7B09-4263-B24E-BFF95A7A7105

Périphérique   Début      Fin Secteurs Taille Type
/dev/sdb1         64  5081203  5081140   2,4G Données de base Microsoft
/dev/sdb2    5081204  5089699     8496   4,1M Système EFI
/dev/sdb3    5089700  5090299      600   300K Données de base Microsoft
/dev/sdb4    5091328 30218778 25127451    12G Système de fichiers Linux

zepp · Le 14/08/2022, à 22:50

Avec un ISO "normal", ici Linux Mint Vanessa, ça fonctionne parfaitement :

dd if=./ISO/linuxmint-21-cinnamon-64bit.iso of=/dev/sde1

Avec un ISO d'Ubuntu ça doit fonctionner aussi.
Par contre avec Raspberry Pi Desktop ça ne fonctionne pas, et l'utilitaire d'installation apporte des changement "persistants" (mais techniquement je ne sais pas au juste comme ça opère)...

zepp · Le 14/08/2022, à 22:55

Désolé je m'aprêtais à poster un premier message, mais le forum m'a tout perdu, car déconnexion, alors mon deuxième message est un peu plus court.

xubu1957 · Le 14/08/2022, à 22:56

Bonjour,

Pour info > Astuce/Tutoriel : « message perdu, déconnecté du forum »

zepp · Le 14/08/2022, à 22:59

Et juste pour information, Raspberry Pi Desktop est un système d'exploitation par les créateurs de Raspberry Pi OS, mais qui fonctionne sur un PC "normal", x86, 32 ou 64 bits.

Screen · Le 14/08/2022, à 23:23

zepp a écrit :

Et juste pour information, Raspberry Pi Desktop est un système d'exploitation par les créateurs de Raspberry Pi OS, mais qui fonctionne sur un PC "normal", x86, 32 ou 64 bits.

quand tu as gravé l'image iso concernant Raspberry Pi Desktop sur la cle usb, c'est sur le Raspberry que ça ne fonctionne pas ou ça ne fonctionne pas non plus sur un PC normal ?

MicP · Le 14/08/2022, à 23:38

Dans son message #11 a écrit :

… bien sûr, ma cle usb peut booter et installer, efi ou non efi, sans quoi je ne me serais pas permis de venir témoigner. …

Ce n'était pas possible avec les anciennes versions d'Ubuntu (je ne sais plus lesquelles, car il y a au moins 4 ans que je n'avais plus tenté de le faire)

Mais avec la version actuelle, effectivement, après essai je peux confirmer qu'il suffit d'ajouter une quatrième partition sur la clef
et de la formater comme bon vous semblera et que la clef USB restera ensuite utilisable pour faire une installation.

=======
Après avoir copié directement sur la clef avec dd le fichier image ISO lubuntu-22.04.1-desktop-amd64.iso

sudo dd if=~/Téléchargements/lubuntu-22.04.1-desktop-amd64.iso of=/dev/sdb bs=4MB status=progress

j'ai créé la 4ème partition sur la clef USB en utilisant fdisk

michel@ubu:~$ sudo fdisk /dev/sdb

Bienvenue dans fdisk (util-linux 2.36.1).
Les modifications resteront en mémoire jusqu'à écriture.
Soyez prudent avant d'utiliser la commande d'écriture.

Mauvaise concordance des tailles de partition du secteur d'amorçage GPT (5250195 != 7864319), elles seront corrigées par l'écriture.
La table GPT de sauvegarde n'est pas à la fin du périphérique. Ce problème sera corrigé par l'écriture.
Le périphérique contient déjà une signature « iso9660 »; elle sera supprimée par une commande d'écriture. Consultez la page man de fdisk(8) et l'option --wipe pour plus de détails.

Commande (m pour l'aide) : p

Disque /dev/sdb : 3,75 GiB, 4026531840 octets, 7864320 secteurs
Modèle de disque : Flash Disk      
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : D2CC4593-30FE-4F63-99CF-A043799AF9B2

Périphérique   Début     Fin Secteurs Taille Type
/dev/sdb1         64 5241035  5240972   2,5G Données de base Microsoft
/dev/sdb2    5241036 5249531     8496   4,1M Système EFI
/dev/sdb3    5249532 5250131      600   300K Données de base Microsoft

Commande (m pour l'aide) : n
Numéro de partition (4-248, 4 par défaut) : 
Premier secteur (5250132-7864256, 5251072 par défaut) : 
Dernier secteur, +/-secteurs ou +/-taille{K,M,G,T,P} (5251072-7864256, 7864256 par défaut) : 

Une nouvelle partition 4 de type « Linux filesystem » et de taille 1,2 GiB a été créée.

Commande (m pour l'aide) : p
Disque /dev/sdb : 3,75 GiB, 4026531840 octets, 7864320 secteurs
Modèle de disque : Flash Disk      
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : D2CC4593-30FE-4F63-99CF-A043799AF9B2

Périphérique   Début     Fin Secteurs Taille Type
/dev/sdb1         64 5241035  5240972   2,5G Données de base Microsoft
/dev/sdb2    5241036 5249531     8496   4,1M Système EFI
/dev/sdb3    5249532 5250131      600   300K Données de base Microsoft
/dev/sdb4    5251072 7864256  2613185   1,2G Système de fichiers Linux

Commande (m pour l'aide) : w
La table de partitions a été altérée.
Appel d'ioctl() pour relire la table de partitions.
Synchronisation des disques.

michel@ubu:~$

et j'ai ensuite formaté cette 4ème partition pour un système de fichiers de type ext4

michel@ubu:~$ sudo mke2fs /dev/sdb4
mke2fs 1.46.2 (28-Feb-2021)
Creating filesystem with 326648 4k blocks and 81760 inodes
Filesystem UUID: 80599758-3e4e-4dfe-abd5-775087b0bd64
Superblock backups stored on blocks: 
	32768, 98304, 163840, 229376, 294912

Allocating group tables: done                            
Writing inode tables: done                            
Writing superblocks and filesystem accounting information: done 

michel@ubu:~$

Après avoir apporté ces modifications sur cette clef USB,
j'ai pu utiliser sans problème cette clef USB pour faire une installation du système Lubuntu sur une machine.

Dernière modification par MicP (Le 15/08/2022, à 12:26)

iznobe · Le 15/08/2022, à 11:36

Bonjour , avec Ventoy , comme indiqué par @geole , l ' avantage flagrant , c' est sue tu peux installer autant de fichier .ISOque tu veux , tout en gardant de l' espace ( taille a indiquer ) que tu le desires par exemple sur une clé de 128 GO , tu peux reserver 64 Go pour toi et mettre des isos sur 60 GO .

c' est ce qui se fait de mieux actuellement pour gérer une clé de la sorte sans se prendre la tête avec des tests multiples qui échoueront des lors que tu dépasses une ISO .
Ventoy accumulent les avantages .

Screen · Le 15/08/2022, à 13:07

MicP a écrit :

Ce n'était pas possible avec les anciennes versions d'Ubuntu (je ne sais plus lesquelles, car il y a au moins 4 ans que je n'avais plus tenté de le faire)

c'est vrai je me souviens qu'avant ce n’était pas possible, la différence est que maintenant cela grave directement en gpt et non plus en type dos, pour l'explication technique il faut revoir les fiches mémos ou demander à Nasman qui connaît bien les octets de la table de partition et aussi l'adresse exacte du code d'instruction pour l'exécution de l'amorce dans le mbr.

@iznobe Ventoy est parfait mais nous sommes dans un cas particulier, cela doit être compatible pour installer sur un Raspberry Pi (architectures armv) et Ventoy ne semble prévu pour ça.

MicP · Le 15/08/2022, à 16:39

Screen a écrit :

…la différence est que maintenant cela grave directement en gpt et non plus en type dos, …

En fait, c'est le MBR (protective MBR) du fichier image ISO d'installation du système Ubuntu (Lubuntu) qui est au format GPT,
la commande dd ne fait que copier directement dans la clef USB (ou carte ou autre) l'intégrité totale du fichier image ISO <=> sans ce soucier de ce que ce fichier image ISO contiendrait
et comme ce fichier est copié directement dans la clef (et non dans une partition de cette clef), alors le MBR (protective MBR) contenu dans les premiers 512 octets du fichier image ISO
se retrouve intégralement copié dans les 512 premiers octets de la clef USB.

Dernière modification par MicP (Le 15/08/2022, à 16:44)

zepp · Le 15/08/2022, à 21:06

L'ISO de Raspberry Pi Desktop est assez particulier : c'est en effet un hybride entre l'ISO classique, comme le Live USB d'ubuntu par exemple, et un vrai système installé.
En effet on peut apporter des modifications "persistantes" au système, utile par exemple pour ne pas avoir à re-rentrer le code wifi à chaque ouverture de session.
J'ignore par contre techniquement comment c'est possible...

MicP · Le 15/08/2022, à 21:21

Il est effectivement impossible de le savoir sans avoir au moins un lien permettant de récupérer le fichier image ISO en question.

Par exemple, le fichier image ISO 2022-07-01-raspios-bullseye-i386.iso (3,4GB) a une table des partitions de type msdos
donc, on pourrait penser que sur une carte SD créée avec ce fichier image ISO la carte SD ne sera plus bootable après y avoir ajouté une partition supplémentaire.

zepp a écrit :

…En effet on peut apporter des modifications "persistantes" au système, utile par exemple pour ne pas avoir à re-rentrer le code wifi à chaque ouverture de session.
J'ignore par contre techniquement comment c'est possible...…

C'est parce que ce système debian Live utilise un système de fichiers compressé de type squashfs + le mode de persistance

Dernière modification par MicP (Le 16/08/2022, à 07:45)

Screen · Le 16/08/2022, à 08:15

sinon, pour répondre au mystère, pourquoi ce n'était pas possible avant d'utiliser l'espace restant non alloué, c'est tout simplement parce que après avoir gravé l'image iso, il n'y avait pas de table de partition, un système peut amorcer sans table de partition, le partitionnement est devenu nécessaire depuis EFI

MicP · Le 16/08/2022, à 08:45

Screen a écrit :

…c'est tout simplement parce que après avoir gravé l'image iso, il n'y avait pas de table de partition, …

Non, il y avait aussi une table de partitionnement (de type msdos) dans les fichiers image ISO des anciens système Ubuntu,
et donc aussi dans la clef USB ou carte SD ou CDROM qui aurait été créé pour l'installation d'Ubuntu avec ces anciennes version d'Ubuntu.

Le problème était que le système résultant n'était plus bootable si l'on modifiait la table de partitionnement (de type msdos) de la clef USB (ou autre support de données) créée avec ces anciens fichiers image ISO.

=======
Ci dessous, voici la table de partitionnement d'une clef USB préparée pour une installation du système Ubuntu 15.04
avec le fichier image ISO ubuntu-15.04-desktop-amd64.iso

michel@ubu:~$ sudo fdisk -l /dev/sdb
Disque /dev/sdb : 3,75 GiB, 4026531840 octets, 7864320 secteurs
Modèle de disque : Flash Disk      
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x1cae5859

Périphérique Amorçage   Début     Fin Secteurs Taille Id Type
/dev/sdb1    *              0 2247743  2247744   1,1G  0 Vide
/dev/sdb2             2231888 2236431     4544   2,2M ef EFI (FAT-12/16/32)
michel@ubu:~$

… et on peut voir dans le retour de commande ci-dessus
la ligne ci-dessous indiquant que la table de partitionnement est de type msdos :

…
Type d'étiquette de disque : dos
…

…alors que dans un fichier image ISO de lubuntu-22.04.1-desktop-amd64.iso on peut voir dans dans mon message #17
que la table de partitionnement est de type gpt :

…
Type d'étiquette de disque : gpt
…

Dernière modification par MicP (Le 16/08/2022, à 09:09)

Babdu89 · Le 16/08/2022, à 09:33

Bonjour.

À voir si l'iso a mettre sur la clé est prise en compte par le MultiSystem de frafa??. Ça je ne saurais répondre.

Mais pour le principe. Si oui, il est possible de faire ce qui est demandé post#1.

Je l'ai fait avec hdd USB de 1,5 To, table de partition MSDos. Obligatoirement, une première partition FAT32 de~ 100 Go. pour y installer le MultiSystem, et y charger beaucoup d'iso à tester.
Les iso peuvent démarrer des session live en Bios_Legacy et UEFI puisque frafa a rendu cela possible.

J'ai utilisé le reste du disque pour y installer des systèmes Linux, qui démarrent depuis le grub du MultiSystem, et une grande partition NTFS pour y stocker des données accessibles sous Windows et Linux.
Je vais faire et poster un boot info avec ce disque brancher...

mofif de post à suivre.

Édit;

Alors comme dirait malbo; État des lieux. On voit tout ceci dans le boot-info ci-dessous.
Machine démarrée en mode UEFI;

   =================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
SecureBoot disabled.

Un ssd interne dans la machine /dev/sda
Le disque USB externe où est le MultiSystem de frafa /dev/sdb
La partition qui contient le MultiSystem /dev/sdb1 permet de booter la machine sur le grub du MultiSystem dans les mode Bios_Legacy et UEFI. Pour cette session c'est en UEFI.

Depuis le menu grub du MultiSystem je lance une session live Lubuntu 32 Bits où est les boot-repair-disk de YannUbuntu.

  ADDITIONAL INFORMATION :
=================== log of boot-repair 20220816_0848 ===================
boot-repair version : 4ppa51
boot-sav version : 4ppa51
boot-sav-extra version : 4ppa51
glade2script version : 3.2.3~ppa2
boot-repair is executed in live-session (Boot-Repair-Disk 32bit 1oct2017, zesty, Ubuntu, i686)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=(loop)/casper/vmlinuz root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 iso-scan/filename=/boot-repair-disk-32bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
ls: cannot access '/home/usr/.config': No such file or directory

Et oui même la machine démarrée en mode UEFI, ça lance les sessions live d'iso 32 bits que l'on ne peut pas installer dans ce mode, j'ai testé.

Il y a je ne sais plus combien d'iso à tester dans la partition du MultiSystem, et dans le menu grub du MultiSytem des menuentry pour lancer les système Linux installé sur ce disque USB.
Pour ceux que ça intéresse, c'est à lire dans le boot-info ci-dessous les;

=========================== sdb1/boot/grub/menu.lst: =========================== 

=========================== sdb1/boot/grub/grub.cfg: ===========================

======================= sdb1/boot/syslinux/syslinux.cfg: =======================

Le boot-info vieille version du 30_09_2017, que je n'ai pas mis à jour pour bénéficier de plus d'info sur les menus.

  Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 30Sep2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos2)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp fat part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20130218
    Boot sector info:  Syslinux looks at sector 3408416 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the 
                       /boot/syslinux directory. According to the info in the 
                       boot sector, sdb1 starts at sector 0. But according to 
                       the info from fdisk, sdb1 starts at sector 63.
    Boot file info:      Grub2 (v2.00) in the file 
                       /super_grub2_disk_hybrid_2.02s9.iso looks at sector 0 
                       of the same hard drive for core.img, but core.img can 
                       not be found at this location.
    Operating System:  
    Boot files:        /boot/grub/menu.lst /boot/grub/grub.cfg 
                       /boot/syslinux/syslinux.cfg /EFI/BOOT/grubx64.efi 
                       /boot/grub/x86_64-efi/core.efi 
                       /boot/grub/x86_64-efi/grub.efi 
                       /boot/grub/i386-pc/core.img /boot/syslinux/ldlinux.sys

sdb2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 10.04.4 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdb7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb9: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb10: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.5 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/extlinux/extlinux.conf 
                       /boot/grub/i386-pc/core.img

sdb11: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb12: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.5 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb13: _________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  According to the info in the boot sector, sdb13 
                       starts at sector 33583104. But according to the info 
                       from fdisk, sdb13 starts at sector 310067200.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/ubuntu/MokManager.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi

sdb14: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb15: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.6 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/extlinux/extlinux.conf 
                       /boot/grub/i386-pc/core.img

sdb16: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    56,383,487    56,381,440   7 NTFS / exFAT / HPFS
/dev/sda2          56,383,488   234,440,703   178,057,216  83 Linux


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1.4 TiB, 1500301910016 bytes, 2930277168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             63   210,981,644   210,981,582   b W95 FAT32
/dev/sdb2         210,981,645   265,363,455    54,381,811  83 Linux
/dev/sdb3         265,363,456   270,696,447     5,332,992  82 Linux swap / Solaris
/dev/sdb4         270,698,494 2,930,272,064 2,659,573,571   5 Extended
/dev/sdb5         377,077,743 2,243,983,359 1,866,905,617   7 NTFS / exFAT / HPFS
/dev/sdb6       2,710,711,773 2,743,195,139    32,483,367  83 Linux
/dev/sdb7       2,743,195,203 2,930,272,064   187,076,862  83 Linux
/dev/sdb8         311,966,298   377,077,626    65,111,329  83 Linux
/dev/sdb9         270,698,496   310,065,151    39,366,656  83 Linux
/dev/sdb10      2,243,985,408 2,278,559,743    34,574,336  83 Linux
/dev/sdb11      2,278,561,792 2,351,484,927    72,923,136  83 Linux
/dev/sdb12      2,351,498,373 2,395,404,622    43,906,250  83 Linux
/dev/sdb13        310,067,200   310,886,399       819,200  ef EFI (FAT-12/16/32)
/dev/sdb14      2,658,041,856 2,702,063,615    44,021,760  83 Linux
/dev/sdb15      2,395,408,384 2,518,323,199   122,914,816  83 Linux
/dev/sdb16      2,518,325,248 2,658,039,807   139,714,560  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0       2017-10-03-11-34-23-00                 iso9660    Boot-Repair-Disk 32bit
/dev/loop1                                              squashfs   
/dev/sda1        FA2AC6152AC5CF37                       ntfs       windows-7-del
/dev/sda2        9f5305b9-ddf9-4400-838d-7bb99f8b492f   ext4       ubuntu20.04-dell
/dev/sdb1        37C7-5656                              vfat       MULTISYSTEM
/dev/sdb10       1d5c84d5-a4bd-4aec-94da-0193cb862645   ext4       xub-14.04-sys-fc
/dev/sdb11       34e0d4bf-f41e-4e26-9285-6616b8ad790c   ext4       xub-14.04-hom-fc
/dev/sdb12       f24fc5ee-4b70-46cd-aa29-25ba3f90caa3   ext4       lubu-brd-14-fc
/dev/sdb13       92C8-E043                              vfat       
/dev/sdb14       5ed68ab9-b2f8-4c4f-b250-59b3acc17ea5   ext4       xub-16.04-hom-fc
/dev/sdb15       1459d458-4677-4952-96ab-9455044611cb   ext4       fusion-14.04-fc
/dev/sdb16       ed310eb9-852f-4b91-a1bc-552266569b41   ext4       ubuntu-20.04-fc
/dev/sdb2        41cfe47e-ddce-46f5-b890-088dc0d63ae7   ext4       xub-16.04-sys-fc
/dev/sdb3        112856cf-033e-467d-bffd-fa4cf2212bed   swap       
/dev/sdb5        22F937315D85425C                       ntfs       FC_HDD_NTFS
/dev/sdb6        4905a4bf-2813-4acc-ba88-2ffedd05b304   ext4       xub_syst_fc
/dev/sdb7        978296e4-0a93-4e65-8d81-da7624af4de8   ext4       xub_hom_fc
/dev/sdb8        3fbf070a-3c84-460f-9900-5152f7a0710a   ext4       fusion-16.04-fc
/dev/sdb9        832d59cb-cb26-449a-8608-065e2c8551a1   ext4       ubu-mate-16.4-fc
/dev/zram0       d2288811-408f-46f1-b346-904116e2378e   swap       
/dev/zram1       e3f2c34e-8a96-4066-8eff-c6b2a3682553   swap       
/dev/zram2       7b8d5086-08ec-4653-8065-f38407baee4f   swap       
/dev/zram3       df023efd-d6e0-4cec-acec-d796976c57d0   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Aug 16 08:48 ata-LDLC_07072217A2384 -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 16 08:49 ata-LDLC_07072217A2384-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 16 08:48 ata-LDLC_07072217A2384-part2 -> ../../sda2
lrwxrwxrwx 1 root root  9 Aug 16 08:48 ata-TSSTcorp_DVD+_-RW_TS-U633J_R86X6GSZB05544 -> ../../sr0
lrwxrwxrwx 1 root root  9 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 11 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part10 -> ../../sdb10
lrwxrwxrwx 1 root root 11 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part11 -> ../../sdb11
lrwxrwxrwx 1 root root 11 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part12 -> ../../sdb12
lrwxrwxrwx 1 root root 11 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part13 -> ../../sdb13
lrwxrwxrwx 1 root root 11 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part14 -> ../../sdb14
lrwxrwxrwx 1 root root 11 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part15 -> ../../sdb15
lrwxrwxrwx 1 root root 11 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part16 -> ../../sdb16
lrwxrwxrwx 1 root root 10 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part6 -> ../../sdb6
lrwxrwxrwx 1 root root 10 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part7 -> ../../sdb7
lrwxrwxrwx 1 root root 10 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part8 -> ../../sdb8
lrwxrwxrwx 1 root root 10 Aug 16 08:48 usb-Freecom_Hard_Drive_XS_FAFFFFF0FDF1F6F1FFB04317-0:0-part9 -> ../../sdb9

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /cdrom                   iso9660    (ro,noatime)
/dev/loop1       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /isodevice               vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb10       /media/lubuntu/xub-14.04-sys-fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb11       /media/lubuntu/xub-14.04-hom-fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb12       /media/lubuntu/lubu-brd-14-fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb14       /media/lubuntu/xub-16.04-hom-fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb15       /media/lubuntu/fusion-14.04-fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb16       /media/lubuntu/ubuntu-20.04-fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb2        /media/lubuntu/xub-16.04-sys-fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb5        /media/lubuntu/FC_HDD_NTFS fuseblk    (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
/dev/sdb6        /media/lubuntu/xub_syst_fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb7        /media/lubuntu/xub_hom_fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb8        /media/lubuntu/fusion-16.04-fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb9        /media/lubuntu/ubu-mate-16.4-fc ext4       (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${initrdfail}" = 2 ]; then
   set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
   set next_entry="${prev_entry}"
   set prev_entry=
   save_env prev_entry
   if [ "${next_entry}" ]; then
      set initrdfail=2
   fi
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function initrdfail {
    if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
      if [ -z "${initrdfail}" ]; then
        set initrdfail=1
        if [ -n "${boot_once}" ]; then
          set prev_entry="${default}"
          save_env prev_entry
        fi
      fi
      save_env initrdfail
    fi; fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9f5305b9-ddf9-4400-838d-7bb99f8b492f
else
  search --no-floppy --fs-uuid --set=root 9f5305b9-ddf9-4400-838d-7bb99f8b492f
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if [ ${grub_platform} != pc ]; then
      set linux_gfx_mode=keep
    elif hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-9f5305b9-ddf9-4400-838d-7bb99f8b492f' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9f5305b9-ddf9-4400-838d-7bb99f8b492f
	else
	  search --no-floppy --fs-uuid --set=root 9f5305b9-ddf9-4400-838d-7bb99f8b492f
	fi
	linux	/boot/vmlinuz-5.15.0-46-generic root=UUID=9f5305b9-ddf9-4400-838d-7bb99f8b492f ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-5.15.0-46-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-9f5305b9-ddf9-4400-838d-7bb99f8b492f' {
	menuentry 'Ubuntu, avec Linux 5.15.0-46-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.15.0-46-generic-advanced-9f5305b9-ddf9-4400-838d-7bb99f8b492f' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9f5305b9-ddf9-4400-838d-7bb99f8b492f
		else
		  search --no-floppy --fs-uuid --set=root 9f5305b9-ddf9-4400-838d-7bb99f8b492f
		fi
		echo	'Chargement de Linux 5.15.0-46-generic…'
		linux	/boot/vmlinuz-5.15.0-46-generic root=UUID=9f5305b9-ddf9-4400-838d-7bb99f8b492f ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.15.0-46-generic
	}
	menuentry 'Ubuntu, avec Linux 5.15.0-46-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.15.0-46-generic-recovery-9f5305b9-ddf9-4400-838d-7bb99f8b492f' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9f5305b9-ddf9-4400-838d-7bb99f8b492f
		else
		  search --no-floppy --fs-uuid --set=root 9f5305b9-ddf9-4400-838d-7bb99f8b492f
		fi
		echo	'Chargement de Linux 5.15.0-46-generic…'
		linux	/boot/vmlinuz-5.15.0-46-generic root=UUID=9f5305b9-ddf9-4400-838d-7bb99f8b492f ro recovery nomodeset dis_ucode_ldr 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.15.0-46-generic
	}
	menuentry 'Ubuntu, avec Linux 5.15.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.15.0-43-generic-advanced-9f5305b9-ddf9-4400-838d-7bb99f8b492f' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9f5305b9-ddf9-4400-838d-7bb99f8b492f
		else
		  search --no-floppy --fs-uuid --set=root 9f5305b9-ddf9-4400-838d-7bb99f8b492f
		fi
		echo	'Chargement de Linux 5.15.0-43-generic…'
		linux	/boot/vmlinuz-5.15.0-43-generic root=UUID=9f5305b9-ddf9-4400-838d-7bb99f8b492f ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.15.0-43-generic
	}
	menuentry 'Ubuntu, avec Linux 5.15.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.15.0-43-generic-recovery-9f5305b9-ddf9-4400-838d-7bb99f8b492f' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9f5305b9-ddf9-4400-838d-7bb99f8b492f
		else
		  search --no-floppy --fs-uuid --set=root 9f5305b9-ddf9-4400-838d-7bb99f8b492f
		fi
		echo	'Chargement de Linux 5.15.0-43-generic…'
		linux	/boot/vmlinuz-5.15.0-43-generic root=UUID=9f5305b9-ddf9-4400-838d-7bb99f8b492f ro recovery nomodeset dis_ucode_ldr 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.15.0-43-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_linux_zfs ###
### END /etc/grub.d/10_linux_zfs ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9f5305b9-ddf9-4400-838d-7bb99f8b492f
	else
	  search --no-floppy --fs-uuid --set=root 9f5305b9-ddf9-4400-838d-7bb99f8b492f
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2  9f5305b9-ddf9-4400-838d-7bb99f8b492f
	else
	  search --no-floppy --fs-uuid --set=root 9f5305b9-ddf9-4400-838d-7bb99f8b492f
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-FA2AC6152AC5CF37' {
	insmod part_msdos
	insmod ntfs
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  FA2AC6152AC5CF37
	else
	  search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
	fi
	parttool ${root} hidden-
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/35_fwupd ###
### END /etc/grub.d/35_fwupd ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb16 during installation
UUID=9f5305b9-ddf9-4400-838d-7bb99f8b492f /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdc6 during installation
#UUID=6c7ae98d-a2b0-4ca1-bec0-38863dcb1d0a none            swap    sw              0       0
#Entry for /swapfile :
/file.swap none swap sw 0 0


#UUID=8B9C-DBB0  /boot/efi       vfat    defaults      0       1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  44.879016876 = 48.188477440   boot/grub/grub.cfg                             1
  32.926273346 = 35.354316800   boot/grub/i386-pc/core.img                     1
  62.500152588 = 67.109027840   boot/vmlinuz                                   4
  56.599113464 = 60.772835328   boot/vmlinuz-5.15.0-43-generic                 2
  62.500152588 = 67.109027840   boot/vmlinuz-5.15.0-46-generic                 4
  56.599113464 = 60.772835328   boot/vmlinuz.old                               2
  92.166988373 = 98.963550208   boot/initrd.img                               10
 102.737277985 = 110.313312256  boot/initrd.img-5.15.0-43-generic             42
  92.166988373 = 98.963550208   boot/initrd.img-5.15.0-46-generic             10
 102.737277985 = 110.313312256  boot/initrd.img.old                           42

=========================== sdb1/boot/grub/menu.lst: ===========================

--------------------------------------------------------------------------------
# This is a sample menu.lst file. You should make some changes to it.
# The old install method of booting via the stage-files has been removed.
# Please install GRLDR boot strap code to MBR with the bootlace.com
# utility under DOS/Win9x or Linux.

timeout 30
default /default
#convert -resize 640x480 -colors 14 /media/multisystem/boot/splash/splash.png /media/multisystem/boot/splash/splash.xpm.gz
splashimage=/boot/splash/splash.xpm.gz
#color blue/green yellow/red white/magenta white/magenta
foreground=0033FF
background=FF3300

#http://diddy.boot-land.net/grub4dos/Grub4dos.htm
#http://www.boot-land.net/forums/index.php?showforum=66
#http://diddy.boot-land.net/grub4dos/files/syntax.htm
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#http://diddy.boot-land.net/grub4dos/files/syntax.htm

title Chainloader into GRUB 2
find --set-root /boot/grub/boot.img
chainloader /boot/grub/boot.img
boot

#title Chainloader into Syslinux
#map (hd0) (hd0)
#map (hd0) (hd0)
#chainloader (hd0,0)+1
#rootnoverify (hd0,0)

##Autre solution pour chainer Syslinux
##faire une copie du mbr de la clé USB
##dd if=/dev/sd?1 of=/media/multisystem/syslinux.mbr bs=512 count=1
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#map (hd0) (hd0)
#map (hd0) (hd0)
#map --rehook
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#chainloader /syslinux.mbr

##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root /boot/syslinux/ldlinux.sys
#chainloader /boot/syslinux/ldlinux.sys

##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /boot/syslinux/redir.img
#kernel /boot/syslinux/memdisk
#initrd /boot/syslinux/redir.img

#http://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/
title FreeDos
kernel /boot/syslinux/memdisk
initrd /boot/img/fdboot.img

title find and load NTLDR of Windows NT/2K/XP
fallback 1
find --set-root --ignore-floppies --ignore-cd /ntldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /ntldr
chainloader /ntldr
savedefault --wait=2

title find and load BOOTMGR of Windows VISTA/SEVEN
fallback 2
find --set-root --ignore-floppies --ignore-cd /bootmgr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /bootmgr
chainloader /bootmgr
savedefault --wait=2

title find and load CMLDR, the Recovery Console of Windows NT/2K/XP
fallback 3
find --set-root --ignore-floppies --ignore-cd /cmldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /cmldr
chainloader /cmldr
#####################################################################
# write string "cmdcons" to memory 0000:7C03 in 2 steps:
#####################################################################
# step 1. Write 4 chars "cmdc" at 0000:7C03
write 0x7C03 0x63646D63
# step 2. Write 3 chars "ons" and an ending null at 0000:7C07
write 0x7C07 0x00736E6F
savedefault --wait=2

title find and load IO.SYS of Windows 9x/Me
fallback 4
find --set-root /io.sys
chainloader /io.sys
savedefault --wait=2

title find and boot 0PE.ISO
fallback 5
find --set-root /0PE/0PE.ISO
map /0PE/0PE.ISO (0xff) || map --mem /0PE/0PE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title find and boot MicroPE.ISO
fallback 6
find --set-root /boot/MicroPE.ISO
map /boot/MicroPE.ISO (0xff) || map --mem /boot/MicroPE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title find and boot ubcd.iso
fallback 8
find --set-root /ubcd.iso
map /ubcd.iso (0xff) || map --mem /ubcd.iso (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title commandline
commandline

title reboot
reboot

title halt
halt
--------------------------------------------------------------------------------

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#insmod gpt
#insmod pc
#insmod gfxmenu
#
#insmod videotest
insmod tga
insmod png
insmod gfxterm
insmod lspci
#insmod vbeinfo
insmod vbe
insmod ntfs
insmod chain
insmod biosdisk
insmod font
#http://grub.enbug.org/ThemeFormat
#http://grub.gibibit.com/Theme_format#colors
#http://code.google.com/p/burg/wiki/InstallUbuntu
#http://code.google.com/p/burg/downloads/list
#http://ubuntuforums.org/showthread.php?t=1195275
#pour acces a grub2 du bootloader principal modifier dans fichier: /etc/default/grub
#GRUB_HIDDEN_TIMEOUT=10 #0 par defaut
#GRUB_HIDDEN_TIMEOUT_QUIET=false #true d'origine
#sudo update-grub
#echo -n "Press ESC to see the menu... "
#if sleep --verbose --interruptible 5 ; then
#set timeout=10
#fi
set default=0
set timeout=10
set fallback=1
search --no-floppy --fs-uuid --set=root 37C7-5656
set root=${root}
#http://grub.enbug.org/gfxterm
if loadfont /boot/polices/unicode.pf2 ; then
set gfxmode=640x480
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
#set gfxmode=auto
#set gfxpayload=keep
fi
fi
#set locale_dir=/boot/grub/locale
#set lang=en
#insmod gettext
if background_image /boot/splash/splash.png ; then
#text no sel/fond ecran
set color_normal=black/black #1
#text sel/fond ecran sel
set color_highlight=light-red/white #1
else
set menu_color_normal=black/black #2
set menu_color_highlight=light-red/white #2
set color_normal=black/magenta #2
set color_highlight=light-red/white #2
fi
#set gfxpayload="1280x1024,1024x768,800x600,640x480"
#set gfxpayload=keep
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
menuentry "_______DEMARRER LES OS LINUX INSTALLES SUR HDD MULTISYSTEM_______" {
echo
}
menuentry 'PT-Lubuntu-BRD-14.04 GNU/Linux' --class pt_lubuntu_brd_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-0239d187-1c9c-4636-be58-7a01068bce62' {
#	recordfail
#	load_video
#	gfxmode $linux_gfx_mode
#	insmod gzio
#	insmod part_msdos
#	insmod ext2
	set root='hd1,msdos13'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos13 --hint-efi=hd1,msdos13 --hint-baremetal=ahci1,msdos13  0239d187-1c9c-4636-be58-7a01068bce62
	else
	  search --no-floppy --fs-uuid --set=root 0239d187-1c9c-4636-be58-7a01068bce62
       configfile (hd0,13)/boot/grub/grub.cfg
	fi
	linux	/boot/vmlinuz-3.13.0-112-generic root=UUID=0239d187-1c9c-4636-be58-7a01068bce62 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-112-generic
}
	menuentry 'PT-Lubuntu-BRD-14.04 GNU/Linux, with Linux 3.13.0-112-generic (recovery mode)' --class pt_lubuntu_brd_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-112-generic-recovery-0239d187-1c9c-4636-be58-7a01068bce62' {
#		recordfail
#		load_video
#		insmod gzio
#		insmod part_msdos
#		insmod ext2
		set root='hd1,msdos13'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos13 --hint-efi=hd1,msdos13 --hint-baremetal=ahci1,msdos13  0239d187-1c9c-4636-be58-7a01068bce62
		else
		  search --no-floppy --fs-uuid --set=root 0239d187-1c9c-4636-be58-7a01068bce62
		fi
		echo	'Chargement de Linux 3.13.0-112-generic…'
		linux	/boot/vmlinuz-3.13.0-112-generic root=UUID=0239d187-1c9c-4636-be58-7a01068bce62 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-112-generic
	}
menuentry "_______MENU GRUB OS LINUX INSTALLES_______" {
echo
}
#chainer un autre grub
menuentry "Hyrbyde Fusion-14.04-HDD-FC, grub.cfg auf /dev/sda15" {
configfile (hd0,15)/boot/grub/grub.cfg
}
#chainer un autre grub
menuentry "Ubuntu-20.04-HDD-FC, grub.cfg auf /dev/sda16" {
configfile (hd0,16)/boot/grub/grub.cfg
}
#chainer un autre grub
menuentry "Ubuntu-Mate-16.04-HDD-FC, grub.cfg auf /dev/sda9" {
configfile (hd0,9)/boot/grub/grub.cfg
}
#chainer un autre grub
menuentry "Xubuntu-16.04-hdd-fc, grub.cfg auf /dev/sda2" {
configfile (hd0,2)/boot/grub/grub.cfg
}
#chainer un autre grub
menuentry "XUBUNTU-14.04-HDD-FC, grub.cfg auf /dev/sda10" {
configfile (hd0,10)/boot/grub/grub.cfg
}
#chainer un autre grub
menuentry "Hybryde-Fusion-16.04-HDD-FC, grub.cfg auf /dev/sda8" {
configfile (hd0,8)/boot/grub/grub.cfg
}
#chainer un autre grub
menuentry "Lubuntu-14.04-BRD-HDD-FC, grub.cfg auf /dev/sda12" {
configfile (hd0,12)/boot/grub/grub.cfg
}
#chainer un autre grub
menuentry "XUBUNTU-10.04-SAUVEGARDE-HDD-FC, grub.cfg auf /dev/sda6" {
configfile (hd0,6)/boot/grub/grub.cfg
}
menuentry "_________ISO STOCKEES A TESTER _________" {
echo
}
#MULTISYSTEM_MENU_DEBUT|17-11-2016-15:21:54-643101801|ms-lts-16.04-i386-r1.iso|multisystem-icon|1316Mio|
menuentry "MultiSystem live French (toram)" {
search --set -f "/ms-lts-16.04-i386-r1.iso"
loopback loop "/ms-lts-16.04-i386-r1.iso"
linux (loop)/casper/vmlinuz.efi toram root=UUID=37C7-5656 iso-scan/filename=/ms-lts-16.04-i386-r1.iso debian-installer/locale=fr_FR.UTF-8 debian-installer/language=fr kbd-chooser/method=fr console-setup/layoutcode=fr console-setup/variantcode=oss console-setup/modelcode=pc105 ignore_uuid boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
menuentry "MultiSystem live English (toram)" {
search --set -f "/ms-lts-16.04-i386-r1.iso"
loopback loop "/ms-lts-16.04-i386-r1.iso"
linux (loop)/casper/vmlinuz.efi toram root=UUID=37C7-5656 iso-scan/filename=/ms-lts-16.04-i386-r1.iso debian-installer/locale=en_US.UTF-8 debian-installer/language=us kbd-chooser/method=us console-setup/layoutcode=us console-setup/modelcode=pc105 ignore_uuid boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|17-11-2016-15:21:54-643101801|ms-lts-16.04-i386-r1.iso|multisystem-icon|1316Mio|
#MULTISYSTEM_MENU_DEBUT|02-11-2017-18:33:10-244684769|ms-lts-16.04-amd64-r1.iso|multisystem-icon|1261Mio|
menuentry "MultiSystem live French (toram)" --class ms --class linux --class os {
search --set -f "/ms-lts-16.04-amd64-r1.iso"
loopback loop "/ms-lts-16.04-amd64-r1.iso"
linux (loop)/casper/vmlinuz.efi toram root=UUID=37C7-5656 iso-scan/filename=/ms-lts-16.04-amd64-r1.iso debian-installer/locale=fr_FR.UTF-8 debian-installer/language=fr kbd-chooser/method=fr console-setup/layoutcode=fr console-setup/variantcode=oss console-setup/modelcode=pc105 ignore_uuid boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
menuentry "MultiSystem live English (toram)" --class ms --class linux --class os {
search --set -f "/ms-lts-16.04-amd64-r1.iso"
loopback loop "/ms-lts-16.04-amd64-r1.iso"
linux (loop)/casper/vmlinuz.efi toram root=UUID=37C7-5656 iso-scan/filename=/ms-lts-16.04-amd64-r1.iso debian-installer/locale=en_US.UTF-8 debian-installer/language=us kbd-chooser/method=us console-setup/layoutcode=us console-setup/modelcode=pc105 ignore_uuid boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|02-11-2017-18:33:10-244684769|ms-lts-16.04-amd64-r1.iso|multisystem-icon|1261Mio|
#MULTISYSTEM_MENU_DEBUT|15-03-2017-00:05:07-086900566|ubuntu6|multisystem-ubuntu|1094Mio|
menuentry "(generic) lubuntu-brd-14.04-k-3.13.0-112-backup.iso" {
linux /ubuntu6/casper/vmlinuz live-media-path=/ubuntu6/casper root=UUID=37C7-5656 file=/cdrom/ubuntu6/preseed/custom.seed maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 boot=casper showmounts ignore_uuid noprompt quiet splash --
initrd /ubuntu6/casper/initrd.gz
}
#MULTISYSTEM_MENU_FIN|15-03-2017-00:05:07-086900566|ubuntu6|multisystem-ubuntu|1094Mio|
#MULTISYSTEM_MENU_DEBUT|17-11-2016-14:43:21-559929657|ubuntu4|multisystem-ubuntu|1079Mio|
menuentry "(generic) lubuntu-brd-14.04-k-3.13.0-101-backup.iso" {
linux /ubuntu4/casper/vmlinuz live-media-path=/ubuntu4/casper root=UUID=37C7-5656 file=/cdrom/ubuntu4/preseed/custom.seed maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode= boot=casper showmounts ignore_uuid noprompt quiet splash --
initrd /ubuntu4/casper/initrd.gz
}
#MULTISYSTEM_MENU_FIN|17-11-2016-14:43:21-559929657|ubuntu4|multisystem-ubuntu|1079Mio|
#MULTISYSTEM_MENU_DEBUT|17-02-2014-17:06:03-444877994|trusty-desktop-i386.iso|multisystem-ubuntu|922Mio|
menuentry "trusty-desktop-i386.iso" {
search --set -f "/trusty-desktop-i386.iso"
loopback loop "/trusty-desktop-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/trusty-desktop-i386.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|17-02-2014-17:06:03-444877994|trusty-desktop-i386.iso|multisystem-ubuntu|922Mio|
#MULTISYSTEM_MENU_DEBUT|14-02-2014-13:00:33-328873620|ubuntu-12.04-desktop-i386-fr.iso|multisystem-ubuntu|665Mio|
menuentry "ubuntu-12.04-desktop-i386-fr.iso" {
search --set -f "/ubuntu-12.04-desktop-i386-fr.iso"
loopback loop "/ubuntu-12.04-desktop-i386-fr.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/ubuntu-12.04-desktop-i386-fr.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|14-02-2014-13:00:33-328873620|ubuntu-12.04-desktop-i386-fr.iso|multisystem-ubuntu|665Mio|
#MULTISYSTEM_MENU_DEBUT|14-02-2014-00:04:37-788920127|Voyager-13.10-i386.iso|multisystem-ubuntu|960Mio|
menuentry "(generic) Voyager-13.10-i386.iso" {
search --set -f "/Voyager-13.10-i386.iso"
loopback loop "/Voyager-13.10-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 file=/cdrom/preseed/xubuntu.seed debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Voyager-13.10-i386.iso boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|14-02-2014-00:04:37-788920127|Voyager-13.10-i386.iso|multisystem-ubuntu|960Mio|
#MULTISYSTEM_MENU_DEBUT|04-05-2013-11:52:22-930340654|redobackup-livecd-1.0.2.iso|multisystem-redo|214Mio|
menuentry "Redo Backup and Recovery" {
loopback loop "/redobackup-livecd-1.0.2.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/redobackup-livecd-1.0.2.iso boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.gz 
}
menuentry "Redo Backup and Recovery xforcevesa" {
loopback loop "/redobackup-livecd-1.0.2.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/redobackup-livecd-1.0.2.iso boot=casper noprompt xforcevesa quiet splash --
initrd (loop)/casper/initrd.gz
}
#MULTISYSTEM_MENU_FIN|04-05-2013-11:52:22-930340654|redobackup-livecd-1.0.2.iso|multisystem-redo|214Mio|
#MULTISYSTEM_MENU_DEBUT|06-05-2013-01:42:22-579510305|pmagic_2012_2_27.iso|multisystem-partedmagic|187Mio|
menuentry "Parted Magic 32Bits" {
loopback loop "/pmagic_2012_2_27.iso"
linux (loop)/pmagic/bzImage uuid=37C7-5656 iso_filename=/pmagic_2012_2_27.iso edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 vmalloc=384MiB fr_FR
initrd (loop)/pmagic/initrd.img
}
menuentry "Parted Magic 64Bits" {
loopback loop "/pmagic_2012_2_27.iso"
linux (loop)/pmagic/bzImage64 uuid=37C7-5656 iso_filename=/pmagic_2012_2_27.iso edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 vmalloc=384MiB fr_FR
initrd (loop)/pmagic/initrd.img
}
#MULTISYSTEM_MENU_FIN|06-05-2013-01:42:22-579510305|pmagic_2012_2_27.iso|multisystem-partedmagic|187Mio|
#MULTISYSTEM_MENU_DEBUT|05-05-2013-20:36:15-527169565|saucy-desktop-i386.iso|multisystem-ubuntu|795Mio|
menuentry "(generic) saucy-desktop-i386.iso" {
search --set -f "/saucy-desktop-i386.iso"
loopback loop "/saucy-desktop-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 file=/cdrom/preseed/ubuntu.seed debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/saucy-desktop-i386.iso boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|05-05-2013-20:36:15-527169565|saucy-desktop-i386.iso|multisystem-ubuntu|795Mio|
#MULTISYSTEM_MENU_DEBUT|19-05-2013-16:13:25-114632803|ubuntu-13.04-desktop-i386.iso|multisystem-ubuntu|794Mio|
menuentry "ubuntu-13.04-desktop-i386.iso" {
search --set -f "/ubuntu-13.04-desktop-i386.iso"
loopback loop "/ubuntu-13.04-desktop-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/ubuntu-13.04-desktop-i386.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|19-05-2013-16:13:25-114632803|ubuntu-13.04-desktop-i386.iso|multisystem-ubuntu|794Mio|
#MULTISYSTEM_MENU_DEBUT|06-07-2013-18:40:00-411552968|xubuntu-12.04.1-desktop-i386.iso|multisystem-xubuntu|682Mio|
menuentry "xubuntu-12.04.1-desktop-i386.iso" {
search --set -f "/xubuntu-12.04.1-desktop-i386.iso"
loopback loop "/xubuntu-12.04.1-desktop-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/xubuntu-12.04.1-desktop-i386.iso boot=casper file=/cdrom/preseed/xubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|06-07-2013-18:40:00-411552968|xubuntu-12.04.1-desktop-i386.iso|multisystem-xubuntu|682Mio|
#MULTISYSTEM_MENU_DEBUT|06-07-2013-18:53:23-783544805|xubuntu-12.10-desktop-i386.iso|multisystem-xubuntu|693Mio|
menuentry "xubuntu-12.10-desktop-i386.iso" {
search --set -f "/xubuntu-12.10-desktop-i386.iso"
loopback loop "/xubuntu-12.10-desktop-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/xubuntu-12.10-desktop-i386.iso boot=casper file=/cdrom/preseed/xubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
menuentry "______________ISO HYBRYDE______________" {
echo
}
#MULTISYSTEM_MENU_FIN|06-07-2013-18:53:23-783544805|xubuntu-12.10-desktop-i386.iso|multisystem-xubuntu|693Mio|
#MULTISYSTEM_MENU_DEBUT|23-07-2013-16:20:17-975726575|Hybryde-V2.iso|multisystem-kubuntu|1163Mio|
menuentry "Hybryde-V2.iso" {
search --set -f "/Hybryde-V2.iso"
loopback loop "/Hybryde-V2.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Hybryde-V2.iso boot=casper file=/cdrom/preseed/kubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|23-07-2013-16:20:17-975726575|Hybryde-V2.iso|multisystem-kubuntu|1163Mio|
#MULTISYSTEM_MENU_DEBUT|23-07-2013-16:21:31-484116013|Hybryde-v04-i386.iso|multisystem-ubuntu|1133Mio|
menuentry "Hybryde-v04-i386.iso" {
search --set -f "/Hybryde-v04-i386.iso"
loopback loop "/Hybryde-v04-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Hybryde-v04-i386.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|23-07-2013-16:21:31-484116013|Hybryde-v04-i386.iso|multisystem-ubuntu|1133Mio|
#MULTISYSTEM_MENU_DEBUT|23-07-2013-16:22:37-863243377|Hybryde_V0.5-live-dvd-i386.iso|multisystem-hybryde|1158Mio|
menuentry "Hybryde_V0.5-live-dvd-i386.iso" {
search --set -f "/Hybryde_V0.5-live-dvd-i386.iso"
loopback loop "/Hybryde_V0.5-live-dvd-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 file=/cdrom/preseed/ubuntu.seed debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Hybryde_V0.5-live-dvd-i386.iso boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|23-07-2013-16:22:37-863243377|Hybryde_V0.5-live-dvd-i386.iso|multisystem-hybryde|1158Mio|
#MULTISYSTEM_MENU_DEBUT|23-07-2013-16:23:45-826172949|Hybryde-Nirvanos-live-dvd-i386.iso|multisystem-hybryde|1322Mio|
menuentry "Hybryde-Nirvanos-live-dvd-i386.iso" {
search --set -f "/Hybryde-Nirvanos-live-dvd-i386.iso"
loopback loop "/Hybryde-Nirvanos-live-dvd-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 file=/cdrom/preseed/ubuntu.seed debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Hybryde-Nirvanos-live-dvd-i386.iso boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|23-07-2013-16:23:45-826172949|Hybryde-Nirvanos-live-dvd-i386.iso|multisystem-hybryde|1322Mio|
#MULTISYSTEM_MENU_DEBUT|23-07-2013-16:25:55-557703623|Hybryde-eldorados-live-dvd-i386.iso|multisystem-ubuntu_secured_remix|1626Mio|
menuentry "Hybryde-eldorados-live-dvd-i386.iso" {
search --set -f "/Hybryde-eldorados-live-dvd-i386.iso"
loopback loop "/Hybryde-eldorados-live-dvd-i386.iso"
linux (loop)/casper//vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Hybryde-eldorados-live-dvd-i386.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|23-07-2013-16:25:55-557703623|Hybryde-eldorados-live-dvd-i386.iso|multisystem-ubuntu_secured_remix|1626Mio|
#MULTISYSTEM_MENU_DEBUT|23-07-2013-16:30:08-904533032|Hybryde-11_10-live-dvd-32bits-i386.iso|multisystem-ubuntu|1300Mio|
menuentry "Hybryde-11_10-live-dvd-32bits-i386.iso" {
search --set -f "/Hybryde-11_10-live-dvd-32bits-i386.iso"
loopback loop "/Hybryde-11_10-live-dvd-32bits-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Hybryde-11_10-live-dvd-32bits-i386.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|23-07-2013-16:30:08-904533032|Hybryde-11_10-live-dvd-32bits-i386.iso|multisystem-ubuntu|1300Mio|
#MULTISYSTEM_MENU_DEBUT|04-05-2013-11:46:37-548101953|Hybryde_Evolution_v1-live-dvd-32bits.iso|multisystem-hybryde|1594Mio|
menuentry "Hybryde_Evolution_v1-live-dvd-32bits.iso" {
search --set -f "/Hybryde_Evolution_v1-live-dvd-32bits.iso"
loopback loop "/Hybryde_Evolution_v1-live-dvd-32bits.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Hybryde_Evolution_v1-live-dvd-32bits.iso boot=casper noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|04-05-2013-11:46:37-548101953|Hybryde_Evolution_v1-live-dvd-32bits.iso|multisystem-hybryde|1594Mio|
#MULTISYSTEM_MENU_DEBUT|04-05-2013-11:50:15-080341948|Hybryde_Fusion-live-dvd-32bits.iso|multisystem-ubuntu|1555Mio|
menuentry "Hybryde_Fusion-live-dvd-32bits.iso" {
search --set -f "/Hybryde_Fusion-live-dvd-32bits.iso"
loopback loop "/Hybryde_Fusion-live-dvd-32bits.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Hybryde_Fusion-live-dvd-32bits.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|04-05-2013-11:50:15-080341948|Hybryde_Fusion-live-dvd-32bits.iso|multisystem-ubuntu|1555Mio|
#MULTISYSTEM_MENU_DEBUT|11-07-2013-16:12:00-531639654|Hybryde-Fusion-release-live-dvd-i386.iso|multisystem-ubuntu|1716Mio|
menuentry "Hybryde-Fusion-release-live-dvd-i386.iso" {
search --set -f "/Hybryde-Fusion-release-live-dvd-i386.iso"
loopback loop "/Hybryde-Fusion-release-live-dvd-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/Hybryde-Fusion-release-live-dvd-i386.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|11-07-2013-16:12:00-531639654|Hybryde-Fusion-release-live-dvd-i386.iso|multisystem-ubuntu|1716Mio|
#MULTISYSTEM_MENU_DEBUT|17-11-2014-12:50:02-996179343|ubuntu1|multisystem-ubuntu|3046Mio|
menuentry "(generic) Hybryde_Fusion_14.04_custom_V3backup.iso" {
linux /ubuntu1/casper/vmlinuz live-media-path=/ubuntu1/casper root=UUID=37C7-5656 file=/cdrom/ubuntu1/preseed/custom.seed maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 boot=casper showmounts ignore_uuid noprompt quiet splash --
initrd /ubuntu1/casper/initrd.gz
}
#MULTISYSTEM_MENU_FIN|17-11-2014-12:50:02-996179343|ubuntu1|multisystem-ubuntu|3046Mio|
#MULTISYSTEM_MENU_DEBUT|27-10-2014-22:09:48-250848726|ubuntu-14.10-desktop-i386.iso|multisystem-ubuntu|1131Mio|
menuentry "ubuntu-14.10-desktop-i386.iso" {
search --set -f "/ubuntu-14.10-desktop-i386.iso"
loopback loop "/ubuntu-14.10-desktop-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 iso-scan/filename=/ubuntu-14.10-desktop-i386.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|27-10-2014-22:09:48-250848726|ubuntu-14.10-desktop-i386.iso|multisystem-ubuntu|1131Mio|
#MULTISYSTEM_MENU_DEBUT|17-11-2014-17:21:41-293910673|ubuntu2|multisystem-ubuntu|2233Mio|
menuentry "(generic) custom-dist.iso" {
linux /ubuntu2/casper/vmlinuz live-media-path=/ubuntu2/casper root=UUID=37C7-5656 file=/cdrom/ubuntu2/preseed/custom.seed maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 boot=casper showmounts ignore_uuid noprompt quiet splash --
initrd /ubuntu2/casper/initrd.gz
}
#MULTISYSTEM_MENU_FIN|17-11-2014-17:21:41-293910673|ubuntu2|multisystem-ubuntu|2233Mio|
#MULTISYSTEM_MENU_DEBUT|20-02-2015-12:53:02-457428848|ubuntu-14.04.2-desktop-amd64.iso|multisystem-ubuntu|996Mio|
menuentry "ubuntu-14.04.2-desktop-amd64.iso" {
search --set -f "/ubuntu-14.04.2-desktop-amd64.iso"
loopback loop "/ubuntu-14.04.2-desktop-amd64.iso"
linux (loop)/casper/vmlinuz.efi root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 iso-scan/filename=/ubuntu-14.04.2-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|20-02-2015-12:53:02-457428848|ubuntu-14.04.2-desktop-amd64.iso|multisystem-ubuntu|996Mio|
#MULTISYSTEM_MENU_DEBUT|20-02-2015-13:12:51-325353512|ubuntu-14.04.2-desktop-i386.iso|multisystem-ubuntu|1003Mio|
menuentry "ubuntu-14.04.2-desktop-i386.iso" {
search --set -f "/ubuntu-14.04.2-desktop-i386.iso"
loopback loop "/ubuntu-14.04.2-desktop-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 iso-scan/filename=/ubuntu-14.04.2-desktop-i386.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|20-02-2015-13:12:51-325353512|ubuntu-14.04.2-desktop-i386.iso|multisystem-ubuntu|1003Mio|
#MULTISYSTEM_MENU_DEBUT|13-12-2016-13:47:07-913263151|ubuntu5|multisystem-ubuntu|2959Mio|
menuentry "(generic) hybryde-16.04-systemback.iso" {
linux /ubuntu5/casper/vmlinuz live-media-path=/ubuntu5/casper root=UUID=37C7-5656  maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 boot=casper showmounts ignore_uuid noprompt quiet splash --
initrd /ubuntu5/casper/initrd.gz
}
#MULTISYSTEM_MENU_FIN|13-12-2016-13:47:07-913263151|ubuntu5|multisystem-ubuntu|2959Mio|
#MULTISYSTEM_MENU_DEBUT|02-11-2017-18:38:42-769394724|boot-repair-disk-32bit.iso|multisystem-lubuntu|805Mio|
menuentry "boot-repair-disk-32bit.iso" {
search --set -f "/boot-repair-disk-32bit.iso"
loopback loop "/boot-repair-disk-32bit.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 iso-scan/filename=/boot-repair-disk-32bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|02-11-2017-18:38:42-769394724|boot-repair-disk-32bit.iso|multisystem-lubuntu|805Mio|
#MULTISYSTEM_MENU_DEBUT|02-11-2017-18:40:14-264161577|boot-repair-disk-64bit.iso|multisystem-lubuntu|863Mio|
menuentry "boot-repair-disk-64bit.iso" {
search --set -f "/boot-repair-disk-64bit.iso"
loopback loop "/boot-repair-disk-64bit.iso"
linux (loop)/casper/vmlinuz.efi root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 iso-scan/filename=/boot-repair-disk-64bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|02-11-2017-18:40:14-264161577|boot-repair-disk-64bit.iso|multisystem-lubuntu|863Mio|
#MULTISYSTEM_MENU_DEBUT|02-11-2017-18:42:05-955518173|ubuntu-budgie-17.04-desktop-i386.iso|multisystem-budgie-remix|1563Mio|
menuentry "ubuntu-budgie-17.04-desktop-i386.iso" {
search --set -f "/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop "/ubuntu-budgie-17.04-desktop-i386.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 iso-scan/filename=/ubuntu-budgie-17.04-desktop-i386.iso boot=casper file=/cdrom/preseed/ubuntu-budgie.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|02-11-2017-18:42:05-955518173|ubuntu-budgie-17.04-desktop-i386.iso|multisystem-budgie-remix|1563Mio|
#MULTISYSTEM_MENU_DEBUT|04-07-2019-13:25:53-661219787|ubuntu-18.04.2-desktop-amd64.iso|multisystem-ubuntu|1904Mio|
menuentry "ubuntu-18.04.2-desktop-amd64.iso" {
search --set -f "/ubuntu-18.04.2-desktop-amd64.iso"
loopback loop "/ubuntu-18.04.2-desktop-amd64.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 iso-scan/filename=/ubuntu-18.04.2-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd
}
#MULTISYSTEM_MENU_FIN|04-07-2019-13:25:53-661219787|ubuntu-18.04.2-desktop-amd64.iso|multisystem-ubuntu|1904Mio|
#MULTISYSTEM_MENU_DEBUT|30-08-2020-09:13:56-168895598|boot-repair-disk-64bit_test2.iso|multisystem-lubuntu|880Mio|
menuentry "boot-repair-disk-64bit_test2.iso" {
search --set -f "/boot-repair-disk-64bit_test2.iso"
loopback loop "/boot-repair-disk-64bit_test2.iso"
linux (loop)/casper/vmlinuz root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/boot-repair-disk-64bit_test2.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd
}
#MULTISYSTEM_MENU_FIN|30-08-2020-09:13:56-168895598|boot-repair-disk-64bit_test2.iso|multisystem-lubuntu|880Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
menuentry "_______________CUSTOM_______________" {
ECHO
}
menuentry "Custom " {
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
}
menuentry "______________Grub4Dos______________" {
echo
}
#http://grub4dos.sourceforge.net/
#http://grub4dos.sourceforge.net/wiki/index.php/Grub4dos_tutorial
menuentry "Grub4Dos" {
linux /boot/grub.exe --config-file=/boot/grub/menu.lst
}
menuentry "______________Syslinux______________" {
echo
}
#solution tordue, mais qui passe partout ...
#menuentry "Syslinux" {
#search --set -f /boot/syslinux/redir.img
# linux16 /boot/syslinux/memdisk
# initrd16 /boot/syslinux/redir.img
#}
#http://syslinux.zytor.com
menuentry "Syslinux" {
search --set -f "/boot/syslinux/ldlinux.sys"
drivemap -s (hd0) $root
chainloader +1
}
#Autre solution pour chainer Syslinux via une copie du mbr
#dd if=/dev/sd?1 of=/media/multisystem/boot/img/syslinux.mbr bs=512 count=1
#menuentry "Syslinux" {
#search --set -f "/boot/img/syslinux.mbr"
#drivemap -s (hd0) $root
#chainloader /boot/img/syslinux.mbr
#}
menuentry "______________UTIL______________" {
echo
}
## for debugging set debug=efi
#menuentry "0-testfakebios" {
# hexdump -s 0xc0000 (mem)
# fakebios
# hexdump -s 0xc0000 (mem)
## deliberate error to get wait for key
# xxx
#}
#How to test GRUB 2 on Macbook
#http://grub.enbug.org/TestingOnMacbook
#
#http://wiki.gentoo.org/wiki/GRUB2
#
#menuentry "Windows 7 BIOS/MBR" {
# insmod part_msdos
# insmod ntldr
# insmod ntfs
# ntldr (hd0,msdos1)/bootmgr
#}
#menuentry "Windows XP BIOS/MBR" {
# insmod part_msdos
# insmod ntldr
# insmod ntfs
# ntldr (hd0,msdos1)/ntldr
#}
#
#chainer un autre grub
#menuentry "Ubuntu-13.04-HDD-FC, grub.cfg auf /dev/sda13" {
# configfile (hd0,13)/boot/grub/grub.cfg
#}
#menuentry "Chain other configfile" {
#configfile /boot/grub/grub-xxx.cfg
#}
#
#menuentry "Return default menu" {
#chainloader /boot/grub/boot.img
#}
#chainer win ou autre OS
#menuentry "Chainer UUID de la partition" {
#insmod=ntfs
#set root=(hd0,1)
#search --no-floppy --fs-uuid --set=root xxx-xxx
# drivemap -s (hd0) $root
# chainloader +1
#}
#http://www.plop.at/en/bootmanagerdl.html
menuentry "PLoP Boot Manager" {
linux16 /boot/img/plpbt
}
#http://www.supergrubdisk.org/
#http://developer.berlios.de/project/showfiles.php?group_id=10921
#SG2D (Floppy, CD & USB in one)
#super_grub_disk_hybrid-1.98s1.iso
menuentry "Super Grub2 Disk" {
search --set -f /boot/img/sgdh.iso
linux16 /boot/syslinux/memdisk
initrd16 /boot/img/sgdh.iso
}
menuentry "Super Grub Disk" {
search --set -f /boot/img/sgdfr.img
linux16 /boot/syslinux/memdisk
initrd16 /boot/img/sgdfr.img
}
menuentry "Smart Boot Manager" {
search --set -f /boot/img/sbootmgr.dsk
linux16 /boot/syslinux/memdisk
initrd16 /boot/img/sbootmgr.dsk
}
#Site: http://boot.kernel.org/index.html
#Téléchargement: http://boot.kernel.org/gpxe_images/gpxe.lkrn
menuentry "BKO (boot.kernel.org)" {
search --set -f /boot/img/gpxe.lkrn
linux16 /boot/img/gpxe.lkrn
}
#http://www.memtest.org/#downiso
menuentry "memtest86+" {
linux16 /boot/img/memtest86+.bin
}
menuentry "vbeinfo" {
vbeinfo
read
}
menuentry "lspci" {
lspci
read
}
menuentry "gfxpayload 640x480" {
set gfxpayload=640x480
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 800x600" {
set gfxpayload=800x600
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1024x768" {
set gfxpayload=1024x768
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1280x1024" {
set gfxpayload=1280x1024
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "Reboot" {
insmod reboot
reboot
}
--------------------------------------------------------------------------------

======================= sdb1/boot/syslinux/syslinux.cfg: =======================

--------------------------------------------------------------------------------
#http://www.syslinux.org/wiki/index.php?title=SYSLINUX#UI_module_options...
#default /boot/syslinux/vesamenu.c32
UI /boot/syslinux/vesamenu.c32

prompt 0
timeout 40
ontimeout 0

MENU TITLE MultiSystem LiveUSB
MENU DEFAULT 0

MENU BACKGROUND /boot/splash/splash.png

#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|30-08-2020-09:42:39-991086843|super_grub2_disk_hybrid_2.02s9.iso|multisystem-img|19Mio|
label 9080
MENU LABEL Super Grub2 Disk
KERNEL memdisk
APPEND iso raw initrd=/super_grub2_disk_hybrid_2.02s9.iso



#MULTISYSTEM_MENU_FIN|30-08-2020-09:42:39-991086843|super_grub2_disk_hybrid_2.02s9.iso|multisystem-img|19Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!

label 0
MENU LABEL PLoP Boot Manager
KERNEL /boot/img/plpbt

label 1
MENU LABEL Grub2
kernel /boot/syslinux/chain.c32 file=/boot/grub/boot.img

label 2
MENU LABEL Grub4Dos
kernel /boot/grub.exe

LABEL 3
MENU LABEL Hardware Detection Tool
KERNEL /boot/syslinux/hdt.c32

#Exemple pour booter un iso avec version recente de memdisk
#label 4
#MENU LABEL boot iso
#KERNEL /boot/syslinux/memdisk
#APPEND iso raw initrd=/g4u.iso

#LABEL 5
#KERNEL /boot/syslinux/memdisk
#APPEND initrd=freebsd.img floppy

#LABEL 6
#MENU LABEL Chainer win
#KERNEL /boot/syslinux/chain.c32 ntldr=/ntldr

#LABEL 7
#MENU LABEL Chainer partition 2
#kernel /boot/syslinux/chain.c32
#append hd0 2

--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/menu.lst                             1
            ?? = ??             boot/grub/grub.cfg                             1
            ?? = ??             boot/grub/i386-pc/core.img                     1

================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/syslinux/syslinux.cfg                     1
            ?? = ??             boot/syslinux/ldlinux.sys                      1
            ?? = ??             boot/syslinux/chain.c32                        1
            ?? = ??             boot/syslinux/hdt.c32                          1
            ?? = ??             boot/syslinux/ifplop.c32                       1
            ?? = ??             boot/syslinux/menu.c32                         1
            ?? = ??             boot/syslinux/reboot.c32                       1
            ?? = ??             boot/syslinux/vesamenu.c32                     1

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 boot/syslinux/chain.c32            :  COM32R module (v4.xx)
 boot/syslinux/hdt.c32              :  COM32R module (v4.xx)
 boot/syslinux/ifplop.c32           :  COM32R module (v4.xx)
 boot/syslinux/menu.c32             :  COM32R module (v4.xx)
 boot/syslinux/reboot.c32           :  COM32R module (v4.xx)
 boot/syslinux/vesamenu.c32         :  COM32R module (v4.xx)

=========================== sdb2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="${saved_entry}"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd4,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos2 --hint-efi=hd4,msdos2 --hint-baremetal=ahci4,msdos2  41cfe47e-ddce-46f5-b890-088dc0d63ae7
else
  search --no-floppy --fs-uuid --set=root 41cfe47e-ddce-46f5-b890-088dc0d63ae7
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='hd4,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos2 --hint-efi=hd4,msdos2 --hint-baremetal=ahci4,msdos2  41cfe47e-ddce-46f5-b890-088dc0d63ae7
else
  search --no-floppy --fs-uuid --set=root 41cfe47e-ddce-46f5-b890-088dc0d63ae7
fi
insmod png
if background_image /usr/share/images/desktop-base/lines-grub.png; then
  true
else
  set menu_color_normal=cyan/blue
  set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'PT-Xubuntu-16.04 GNU/Linux' --class pt_xubuntu_16_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-41cfe47e-ddce-46f5-b890-088dc0d63ae7' {
	recordfail
	savedefault
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd4,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos2 --hint-efi=hd4,msdos2 --hint-baremetal=ahci4,msdos2  41cfe47e-ddce-46f5-b890-088dc0d63ae7
	else
	  search --no-floppy --fs-uuid --set=root 41cfe47e-ddce-46f5-b890-088dc0d63ae7
	fi
        linux	/boot/vmlinuz-4.4.0-101-generic root=UUID=41cfe47e-ddce-46f5-b890-088dc0d63ae7 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-101-generic
}
submenu 'Options avancées pour PT-Xubuntu-16.04 GNU/Linux' $menuentry_id_option 'gnulinux-advanced-41cfe47e-ddce-46f5-b890-088dc0d63ae7' {
	menuentry 'PT-Xubuntu-16.04 GNU/Linux, avec Linux 4.4.0-101-generic' --class pt_xubuntu_16_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-101-generic-advanced-41cfe47e-ddce-46f5-b890-088dc0d63ae7' {
		recordfail
	savedefault
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos2 --hint-efi=hd4,msdos2 --hint-baremetal=ahci4,msdos2  41cfe47e-ddce-46f5-b890-088dc0d63ae7
		else
		  search --no-floppy --fs-uuid --set=root 41cfe47e-ddce-46f5-b890-088dc0d63ae7
		fi
		echo	'Chargement de Linux 4.4.0-101-generic…'
	        linux	/boot/vmlinuz-4.4.0-101-generic root=UUID=41cfe47e-ddce-46f5-b890-088dc0d63ae7 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-101-generic
	}
	menuentry 'PT-Xubuntu-16.04 GNU/Linux, with Linux 4.4.0-101-generic (upstart)' --class pt_xubuntu_16_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-101-generic-init-upstart-41cfe47e-ddce-46f5-b890-088dc0d63ae7' {
		recordfail
	savedefault
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos2 --hint-efi=hd4,msdos2 --hint-baremetal=ahci4,msdos2  41cfe47e-ddce-46f5-b890-088dc0d63ae7
		else
		  search --no-floppy --fs-uuid --set=root 41cfe47e-ddce-46f5-b890-088dc0d63ae7
		fi
		echo	'Chargement de Linux 4.4.0-101-generic…'
	        linux	/boot/vmlinuz-4.4.0-101-generic root=UUID=41cfe47e-ddce-46f5-b890-088dc0d63ae7 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-101-generic
	}
	menuentry 'PT-Xubuntu-16.04 GNU/Linux, with Linux 4.4.0-101-generic (recovery mode)' --class pt_xubuntu_16_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-101-generic-recovery-41cfe47e-ddce-46f5-b890-088dc0d63ae7' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos2 --hint-efi=hd4,msdos2 --hint-baremetal=ahci4,msdos2  41cfe47e-ddce-46f5-b890-088dc0d63ae7
		else
		  search --no-floppy --fs-uuid --set=root 41cfe47e-ddce-46f5-b890-088dc0d63ae7
		fi
		echo	'Chargement de Linux 4.4.0-101-generic…'
	        linux	/boot/vmlinuz-4.4.0-101-generic root=UUID=41cfe47e-ddce-46f5-b890-088dc0d63ae7 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-101-generic
	}
	menuentry 'PT-Xubuntu-16.04 GNU/Linux, avec Linux 4.4.0-98-generic' --class pt_xubuntu_16_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-98-generic-advanced-41cfe47e-ddce-46f5-b890-088dc0d63ae7' {
		recordfail
	savedefault
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos2 --hint-efi=hd4,msdos2 --hint-baremetal=ahci4,msdos2  41cfe47e-ddce-46f5-b890-088dc0d63ae7
		else
		  search --no-floppy --fs-uuid --set=root 41cfe47e-ddce-46f5-b890-088dc0d63ae7
		fi
		echo	'Chargement de Linux 4.4.0-98-generic…'
	        linux	/boot/vmlinuz-4.4.0-98-generic root=UUID=41cfe47e-ddce-46f5-b890-088dc0d63ae7 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-98-generic
	}
	menuentry 'PT-Xubuntu-16.04 GNU/Linux, with Linux 4.4.0-98-generic (upstart)' --class pt_xubuntu_16_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-98-generic-init-upstart-41cfe47e-ddce-46f5-b890-088dc0d63ae7' {
		recordfail
	savedefault
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos2 --hint-efi=hd4,msdos2 --hint-baremetal=ahci4,msdos2  41cfe47e-ddce-46f5-b890-088dc0d63ae7
		else
		  search --no-floppy --fs-uuid --set=root 41cfe47e-ddce-46f5-b890-088dc0d63ae7
		fi
		echo	'Chargement de Linux 4.4.0-98-generic…'
	        linux	/boot/vmlinuz-4.4.0-98-generic root=UUID=41cfe47e-ddce-46f5-b890-088dc0d63ae7 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-98-generic
	}
	menuentry 'PT-Xubuntu-16.04 GNU/Linux, with Linux 4.4.0-98-generic (recovery mode)' --class pt_xubuntu_16_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-98-generic-recovery-41cfe47e-ddce-46f5-b890-088dc0d63ae7' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos2 --hint-efi=hd4,msdos2 --hint-baremetal=ahci4,msdos2  41cfe47e-ddce-46f5-b890-088dc0d63ae7
		else
		  search --no-floppy --fs-uuid --set=root 41cfe47e-ddce-46f5-b890-088dc0d63ae7
		fi
		echo	'Chargement de Linux 4.4.0-98-generic…'
	        linux	/boot/vmlinuz-4.4.0-98-generic root=UUID=41cfe47e-ddce-46f5-b890-088dc0d63ae7 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-98-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# /
UUID=41cfe47e-ddce-46f5-b890-088dc0d63ae7   /   ext4   noatime,errors=remount-ro   0   1
# /home
UUID=5ed68ab9-b2f8-4c4f-b250-59b3acc17ea5   /home   ext4   noatime   0   2
--------------------------------------------------------------------------------

=================== sdb2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 104.737551212 = 112.461089280  boot/grub/grub.cfg                             1
 109.093653202 = 117.138418176  boot/grub/i386-pc/core.img                     1
 104.797762394 = 112.525740544  boot/vmlinuz-4.4.0-101-generic                 1
 104.754255772 = 112.479025664  boot/vmlinuz-4.4.0-98-generic                  1
 104.797762394 = 112.525740544  vmlinuz                                        1
 104.754255772 = 112.479025664  vmlinuz.old                                    1
 100.788340092 = 108.220656128  boot/initrd.img-4.4.0-101-generic              2
 100.811773777 = 108.245817856  boot/initrd.img-4.4.0-98-generic               2
 100.788340092 = 108.220656128  initrd.img                                     2
 100.811773777 = 108.245817856  initrd.img.old                                 2

=========================== sdb6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  set saved_entry=${prev_saved_entry}
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z ${boot_once} ]; then
    saved_entry=${chosen}
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd4,6)'
search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=800x600
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
insmod ext2
set root='(hd4,6)'
search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ ${recordfail} = 1 ]; then
  set timeout=10
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, avec Linux 2.6.32-44-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd4,6)'
	search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
	linux	/boot/vmlinuz-2.6.32-44-generic root=UUID=4905a4bf-2813-4acc-ba88-2ffedd05b304 ro  vga=758  quiet splash
	initrd	/boot/initrd.img-2.6.32-44-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-44-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd4,6)'
	search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
	echo	'Chargement de Linux 2.6.32-44-generic ...'
	linux	/boot/vmlinuz-2.6.32-44-generic root=UUID=4905a4bf-2813-4acc-ba88-2ffedd05b304 ro single  vga=758
	echo	'Chargement du disque mémoire initial ...'
	initrd	/boot/initrd.img-2.6.32-44-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-43-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd4,6)'
	search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
	linux	/boot/vmlinuz-2.6.32-43-generic root=UUID=4905a4bf-2813-4acc-ba88-2ffedd05b304 ro  vga=758  quiet splash
	initrd	/boot/initrd.img-2.6.32-43-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-43-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd4,6)'
	search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
	echo	'Chargement de Linux 2.6.32-43-generic ...'
	linux	/boot/vmlinuz-2.6.32-43-generic root=UUID=4905a4bf-2813-4acc-ba88-2ffedd05b304 ro single  vga=758
	echo	'Chargement du disque mémoire initial ...'
	initrd	/boot/initrd.img-2.6.32-43-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd4,6)'
	search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
	linux	/boot/vmlinuz-2.6.32-21-generic root=UUID=4905a4bf-2813-4acc-ba88-2ffedd05b304 ro  vga=758  quiet splash
	initrd	/boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-21-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd4,6)'
	search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
	echo	'Chargement de Linux 2.6.32-21-generic ...'
	linux	/boot/vmlinuz-2.6.32-21-generic root=UUID=4905a4bf-2813-4acc-ba88-2ffedd05b304 ro single  vga=758
	echo	'Chargement du disque mémoire initial ...'
	initrd	/boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod ext2
	set root='(hd4,6)'
	search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod ext2
	set root='(hd4,6)'
	search --no-floppy --fs-uuid --set 4905a4bf-2813-4acc-ba88-2ffedd05b304
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/40_multisystem ###
# Ajout de MultiSystem

### MULTISYSTEM MENU
menuentry "PLoP Boot Manager" {
	linux16 /boot/plpbt
}

menuentry "Smart Boot Manager" {
search --set -f /boot/sbootmgr.dsk
	linux16 /boot/memdisk
	initrd16 /boot/sbootmgr.dsk
}
### FIN MULTISYSTEM MENU
### END /etc/grub.d/40_multisystem ###
--------------------------------------------------------------------------------

=============================== sdb6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc	/proc	proc	defaults	0	0
#Entry for /dev/sde6 :
UUID=4905a4bf-2813-4acc-ba88-2ffedd05b304	/	ext4	errors=remount-ro	0	1
#Entry for /dev/sde7 :
UUID=978296e4-0a93-4e65-8d81-da7624af4de8	/home	ext4	defaults	0	2
UUID=e60d2093-39cd-497c-8838-ef509dabda04	none	swap	sw	0	0
UUID=651c4503-a92c-40a0-bd0c-7211737c06ef	none	swap	sw	0	0
UUID=69ccaba9-95d8-41f2-908c-5d8187e0ac2f	none	swap	sw	0	0
/dev/scd0	/media/cdrom0	udf,iso9660	user,noauto,exec,utf8	0	0


--------------------------------------------------------------------------------

=================== sdb6: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

1294.726328373 = 1390.201809408 boot/grub/grub.cfg                             1
1294.701086521 = 1390.174706176 boot/grub/core.img                             1
1294.930544376 = 1390.421084672 boot/vmlinuz-2.6.32-21-generic                 1
1301.919523716 = 1397.925444096 boot/vmlinuz-2.6.32-43-generic                 1
1293.792570591 = 1389.199194624 boot/vmlinuz-2.6.32-44-generic                 1
1293.792570591 = 1389.199194624 vmlinuz                                        1
1301.919523716 = 1397.925444096 vmlinuz.old                                    1
1294.957941532 = 1390.450502144 boot/initrd.img-2.6.32-21-generic              1
1302.197607517 = 1398.224034304 boot/initrd.img-2.6.32-43-generic              2
1293.971052647 = 1389.390838272 boot/initrd.img-2.6.32-44-generic              2
1293.971052647 = 1389.390838272 initrd.img                                     2
1302.197607517 = 1398.224034304 initrd.img.old                                 2

=========================== sdb8/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos8'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
else
  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3fbf070a-3c84-460f-9900-5152f7a0710a' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos8'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
	else
	  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
	fi
        linux	/boot/vmlinuz-4.4.0-62-generic root=/dev/sdb8 ro  quiet splash $vt_handoff
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-3fbf070a-3c84-460f-9900-5152f7a0710a' {
	menuentry 'Ubuntu, avec Linux 4.4.0-62-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-62-generic-advanced-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-62-generic…'
	        linux	/boot/vmlinuz-4.4.0-62-generic root=/dev/sdb8 ro  quiet splash $vt_handoff
	}
	menuentry 'Ubuntu, with Linux 4.4.0-62-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-62-generic-init-upstart-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-62-generic…'
	        linux	/boot/vmlinuz-4.4.0-62-generic root=/dev/sdb8 ro  quiet splash $vt_handoff init=/sbin/upstart
	}
	menuentry 'Ubuntu, with Linux 4.4.0-62-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-62-generic-recovery-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-62-generic…'
	        linux	/boot/vmlinuz-4.4.0-62-generic root=/dev/sdb8 ro recovery nomodeset 
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-57-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-advanced-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-57-generic…'
	        linux	/boot/vmlinuz-4.4.0-57-generic root=/dev/sdb8 ro  quiet splash $vt_handoff
	}
	menuentry 'Ubuntu, with Linux 4.4.0-57-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-init-upstart-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-57-generic…'
	        linux	/boot/vmlinuz-4.4.0-57-generic root=/dev/sdb8 ro  quiet splash $vt_handoff init=/sbin/upstart
	}
	menuentry 'Ubuntu, with Linux 4.4.0-57-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-57-generic-recovery-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-57-generic…'
	        linux	/boot/vmlinuz-4.4.0-57-generic root=/dev/sdb8 ro recovery nomodeset 
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-53-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-53-generic-advanced-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-53-generic…'
	        linux	/boot/vmlinuz-4.4.0-53-generic root=/dev/sdb8 ro  quiet splash $vt_handoff
	}
	menuentry 'Ubuntu, with Linux 4.4.0-53-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-53-generic-init-upstart-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-53-generic…'
	        linux	/boot/vmlinuz-4.4.0-53-generic root=/dev/sdb8 ro  quiet splash $vt_handoff init=/sbin/upstart
	}
	menuentry 'Ubuntu, with Linux 4.4.0-53-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-53-generic-recovery-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-53-generic…'
	        linux	/boot/vmlinuz-4.4.0-53-generic root=/dev/sdb8 ro recovery nomodeset 
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
	        linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=3fbf070a-3c84-460f-9900-5152f7a0710a ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-init-upstart-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
	        linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=3fbf070a-3c84-460f-9900-5152f7a0710a ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
	        linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=3fbf070a-3c84-460f-9900-5152f7a0710a ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, avec Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-24-generic-advanced-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 3.2.0-24-generic…'
	        linux	/boot/vmlinuz-3.2.0-24-generic root=UUID=3fbf070a-3c84-460f-9900-5152f7a0710a ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-24-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-24-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-24-generic-init-upstart-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 3.2.0-24-generic…'
	        linux	/boot/vmlinuz-3.2.0-24-generic root=UUID=3fbf070a-3c84-460f-9900-5152f7a0710a ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-24-generic
	}
	menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.2.0-24-generic-recovery-3fbf070a-3c84-460f-9900-5152f7a0710a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos8'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos8 --hint-efi=hd1,msdos8 --hint-baremetal=ahci1,msdos8  3fbf070a-3c84-460f-9900-5152f7a0710a
		else
		  search --no-floppy --fs-uuid --set=root 3fbf070a-3c84-460f-9900-5152f7a0710a
		fi
		echo	'Chargement de Linux 3.2.0-24-generic…'
	        linux	/boot/vmlinuz-3.2.0-24-generic root=UUID=3fbf070a-3c84-460f-9900-5152f7a0710a ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.2.0-24-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb8/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# /
UUID=3fbf070a-3c84-460f-9900-5152f7a0710a   /   ext4   noatime,errors=remount-ro   0   1
# swap was on /dev/sd*3 during installation
UUID=112856cf-033e-467d-bffd-fa4cf2212bed none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
--------------------------------------------------------------------------------

=================== sdb8: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 164.891171455 = 177.050547200  boot/grub/grub.cfg                             1
 165.666974068 = 177.883558912  boot/grub/i386-pc/core.img                     1
 164.901337624 = 177.061463040  boot/vmlinuz-3.2.0-24-generic                  1
 164.907631874 = 177.068221440  boot/vmlinuz-4.4.0-21-generic                  1
 155.161728859 = 166.603637760  boot/vmlinuz-4.4.0-53-generic                  1
 155.971432686 = 167.473050624  boot/vmlinuz-4.4.0-57-generic                  1
 159.811470985 = 171.596260352  boot/vmlinuz-4.4.0-62-generic                  1
 159.811470985 = 171.596260352  vmlinuz                                        1
 155.971432686 = 167.473050624  vmlinuz.old                                    1
 148.909771919 = 159.890650112  boot/initrd.img-3.2.0-24-generic               1
 148.944619179 = 159.928067072  boot/initrd.img-4.4.0-21-generic               2

=========================== sdb9/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd4,msdos9'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos9 --hint-efi=hd4,msdos9 --hint-baremetal=ahci4,msdos9  832d59cb-cb26-449a-8608-065e2c8551a1
else
  search --no-floppy --fs-uuid --set=root 832d59cb-cb26-449a-8608-065e2c8551a1
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'PT-UBUNTU-MATE 16.04 GNU/Linux' --class pt_ubuntu_mate --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-832d59cb-cb26-449a-8608-065e2c8551a1' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd4,msdos9'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos9 --hint-efi=hd4,msdos9 --hint-baremetal=ahci4,msdos9  832d59cb-cb26-449a-8608-065e2c8551a1
	else
	  search --no-floppy --fs-uuid --set=root 832d59cb-cb26-449a-8608-065e2c8551a1
	fi
        linux	/boot/vmlinuz-4.4.0-101-generic root=UUID=832d59cb-cb26-449a-8608-065e2c8551a1 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-101-generic
}
submenu 'Options avancées pour PT-UBUNTU-MATE 16.04 GNU/Linux' $menuentry_id_option 'gnulinux-advanced-832d59cb-cb26-449a-8608-065e2c8551a1' {
	menuentry 'PT-UBUNTU-MATE 16.04 GNU/Linux, avec Linux 4.4.0-101-generic' --class pt_ubuntu_mate --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-101-generic-advanced-832d59cb-cb26-449a-8608-065e2c8551a1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos9'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos9 --hint-efi=hd4,msdos9 --hint-baremetal=ahci4,msdos9  832d59cb-cb26-449a-8608-065e2c8551a1
		else
		  search --no-floppy --fs-uuid --set=root 832d59cb-cb26-449a-8608-065e2c8551a1
		fi
		echo	'Chargement de Linux 4.4.0-101-generic…'
	        linux	/boot/vmlinuz-4.4.0-101-generic root=UUID=832d59cb-cb26-449a-8608-065e2c8551a1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-101-generic
	}
	menuentry 'PT-UBUNTU-MATE 16.04 GNU/Linux, with Linux 4.4.0-101-generic (recovery mode)' --class pt_ubuntu_mate --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-101-generic-recovery-832d59cb-cb26-449a-8608-065e2c8551a1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos9'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos9 --hint-efi=hd4,msdos9 --hint-baremetal=ahci4,msdos9  832d59cb-cb26-449a-8608-065e2c8551a1
		else
		  search --no-floppy --fs-uuid --set=root 832d59cb-cb26-449a-8608-065e2c8551a1
		fi
		echo	'Chargement de Linux 4.4.0-101-generic…'
	        linux	/boot/vmlinuz-4.4.0-101-generic root=UUID=832d59cb-cb26-449a-8608-065e2c8551a1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-101-generic
	}
	menuentry 'PT-UBUNTU-MATE 16.04 GNU/Linux, avec Linux 4.4.0-98-generic' --class pt_ubuntu_mate --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-98-generic-advanced-832d59cb-cb26-449a-8608-065e2c8551a1' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos9'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos9 --hint-efi=hd4,msdos9 --hint-baremetal=ahci4,msdos9  832d59cb-cb26-449a-8608-065e2c8551a1
		else
		  search --no-floppy --fs-uuid --set=root 832d59cb-cb26-449a-8608-065e2c8551a1
		fi
		echo	'Chargement de Linux 4.4.0-98-generic…'
	        linux	/boot/vmlinuz-4.4.0-98-generic root=UUID=832d59cb-cb26-449a-8608-065e2c8551a1 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-98-generic
	}
	menuentry 'PT-UBUNTU-MATE 16.04 GNU/Linux, with Linux 4.4.0-98-generic (recovery mode)' --class pt_ubuntu_mate --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-98-generic-recovery-832d59cb-cb26-449a-8608-065e2c8551a1' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd4,msdos9'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos9 --hint-efi=hd4,msdos9 --hint-baremetal=ahci4,msdos9  832d59cb-cb26-449a-8608-065e2c8551a1
		else
		  search --no-floppy --fs-uuid --set=root 832d59cb-cb26-449a-8608-065e2c8551a1
		fi
		echo	'Chargement de Linux 4.4.0-98-generic…'
	        linux	/boot/vmlinuz-4.4.0-98-generic root=UUID=832d59cb-cb26-449a-8608-065e2c8551a1 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-98-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd4,msdos9'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos9 --hint-efi=hd4,msdos9 --hint-baremetal=ahci4,msdos9  832d59cb-cb26-449a-8608-065e2c8551a1
	else
	  search --no-floppy --fs-uuid --set=root 832d59cb-cb26-449a-8608-065e2c8551a1
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd4,msdos9'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos9 --hint-efi=hd4,msdos9 --hint-baremetal=ahci4,msdos9  832d59cb-cb26-449a-8608-065e2c8551a1
	else
	  search --no-floppy --fs-uuid --set=root 832d59cb-cb26-449a-8608-065e2c8551a1
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb9/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# /
UUID=832d59cb-cb26-449a-8608-065e2c8551a1   /   ext4   noatime,errors=remount-ro   0   1
--------------------------------------------------------------------------------

=================== sdb9: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 135.236579895 = 145.209171968  boot/grub/grub.cfg                             1
 139.377517700 = 149.655470080  boot/grub/i386-pc/core.img                     1
 135.224185944 = 145.195864064  boot/vmlinuz-4.4.0-101-generic                 1
 135.214385986 = 145.185341440  boot/vmlinuz-4.4.0-98-generic                  1
 135.224185944 = 145.195864064  vmlinuz                                        1
 135.214385986 = 145.185341440  vmlinuz.old                                    1
 130.153907776 = 139.751694336  boot/initrd.img-4.4.0-101-generic              2
 130.133785248 = 139.730087936  boot/initrd.img-4.4.0-98-generic               3
 130.153907776 = 139.751694336  initrd.img                                     2
 130.133785248 = 139.730087936  initrd.img.old                                 3

========================== sdb10/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="${saved_entry}"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd2,msdos10'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos10 --hint-efi=hd2,msdos10 --hint-baremetal=ahci2,msdos10  1d5c84d5-a4bd-4aec-94da-0193cb862645
else
  search --no-floppy --fs-uuid --set=root 1d5c84d5-a4bd-4aec-94da-0193cb862645
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='hd2,msdos10'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos10 --hint-efi=hd2,msdos10 --hint-baremetal=ahci2,msdos10  1d5c84d5-a4bd-4aec-94da-0193cb862645
else
  search --no-floppy --fs-uuid --set=root 1d5c84d5-a4bd-4aec-94da-0193cb862645
fi
insmod png
if background_image /usr/share/images/desktop-base/joy-grub.png; then
  true
else
  set menu_color_normal=cyan/blue
  set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'PT-Xubuntu-14.04 GNU/Linux' --class pt_xubuntu_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1d5c84d5-a4bd-4aec-94da-0193cb862645' {
	recordfail
	savedefault
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd2,msdos10'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos10 --hint-efi=hd2,msdos10 --hint-baremetal=ahci2,msdos10  1d5c84d5-a4bd-4aec-94da-0193cb862645
	else
	  search --no-floppy --fs-uuid --set=root 1d5c84d5-a4bd-4aec-94da-0193cb862645
	fi
	linux	/boot/vmlinuz-3.13.0-135-generic root=/dev/sdc10 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-135-generic
}
submenu 'Options avancées pour PT-Xubuntu-14.04 GNU/Linux' $menuentry_id_option 'gnulinux-advanced-1d5c84d5-a4bd-4aec-94da-0193cb862645' {
	menuentry 'PT-Xubuntu-14.04 GNU/Linux, avec Linux 3.13.0-135-generic' --class pt_xubuntu_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-135-generic-advanced-1d5c84d5-a4bd-4aec-94da-0193cb862645' {
		recordfail
	savedefault
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd2,msdos10'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos10 --hint-efi=hd2,msdos10 --hint-baremetal=ahci2,msdos10  1d5c84d5-a4bd-4aec-94da-0193cb862645
		else
		  search --no-floppy --fs-uuid --set=root 1d5c84d5-a4bd-4aec-94da-0193cb862645
		fi
		echo	'Chargement de Linux 3.13.0-135-generic…'
		linux	/boot/vmlinuz-3.13.0-135-generic root=/dev/sdc10 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-135-generic
	}
	menuentry 'PT-Xubuntu-14.04 GNU/Linux, with Linux 3.13.0-135-generic (recovery mode)' --class pt_xubuntu_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-135-generic-recovery-1d5c84d5-a4bd-4aec-94da-0193cb862645' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd2,msdos10'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos10 --hint-efi=hd2,msdos10 --hint-baremetal=ahci2,msdos10  1d5c84d5-a4bd-4aec-94da-0193cb862645
		else
		  search --no-floppy --fs-uuid --set=root 1d5c84d5-a4bd-4aec-94da-0193cb862645
		fi
		echo	'Chargement de Linux 3.13.0-135-generic…'
		linux	/boot/vmlinuz-3.13.0-135-generic root=/dev/sdc10 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-135-generic
	}
	menuentry 'PT-Xubuntu-14.04 GNU/Linux, avec Linux 3.13.0-133-generic' --class pt_xubuntu_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-133-generic-advanced-1d5c84d5-a4bd-4aec-94da-0193cb862645' {
		recordfail
	savedefault
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd2,msdos10'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos10 --hint-efi=hd2,msdos10 --hint-baremetal=ahci2,msdos10  1d5c84d5-a4bd-4aec-94da-0193cb862645
		else
		  search --no-floppy --fs-uuid --set=root 1d5c84d5-a4bd-4aec-94da-0193cb862645
		fi
		echo	'Chargement de Linux 3.13.0-133-generic…'
		linux	/boot/vmlinuz-3.13.0-133-generic root=/dev/sdc10 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-133-generic
	}
	menuentry 'PT-Xubuntu-14.04 GNU/Linux, with Linux 3.13.0-133-generic (recovery mode)' --class pt_xubuntu_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-133-generic-recovery-1d5c84d5-a4bd-4aec-94da-0193cb862645' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd2,msdos10'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos10 --hint-efi=hd2,msdos10 --hint-baremetal=ahci2,msdos10  1d5c84d5-a4bd-4aec-94da-0193cb862645
		else
		  search --no-floppy --fs-uuid --set=root 1d5c84d5-a4bd-4aec-94da-0193cb862645
		fi
		echo	'Chargement de Linux 3.13.0-133-generic…'
		linux	/boot/vmlinuz-3.13.0-133-generic root=/dev/sdc10 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-133-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd2,msdos10'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos10 --hint-efi=hd2,msdos10 --hint-baremetal=ahci2,msdos10  1d5c84d5-a4bd-4aec-94da-0193cb862645
	else
	  search --no-floppy --fs-uuid --set=root 1d5c84d5-a4bd-4aec-94da-0193cb862645
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd2,msdos10'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos10 --hint-efi=hd2,msdos10 --hint-baremetal=ahci2,msdos10  1d5c84d5-a4bd-4aec-94da-0193cb862645
	else
	  search --no-floppy --fs-uuid --set=root 1d5c84d5-a4bd-4aec-94da-0193cb862645
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb10/etc/fstab: ===============================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# /
UUID=1d5c84d5-a4bd-4aec-94da-0193cb862645   /   ext4   noatime,errors=remount-ro   0   1
# /home
UUID=34e0d4bf-f41e-4e26-9285-6616b8ad790c   /home   ext4   noatime   0   2
--------------------------------------------------------------------------------

====================== sdb10/boot/extlinux/extlinux.conf: ======================

--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update


default l0
prompt 1
timeout 50

include themes/debian/theme.cfg
--------------------------------------------------------------------------------

=================== sdb10: Location of files loaded by Grub: ===================

           GiB - GB             File                                 Fragment(s)

1076.170539856 = 1155.529318400 boot/grub/grub.cfg                             1
1078.773910522 = 1158.324666368 boot/grub/i386-pc/core.img                     1
1076.151256561 = 1155.508613120 boot/vmlinuz-3.13.0-133-generic                1
1076.160495758 = 1155.518533632 boot/vmlinuz-3.13.0-135-generic                1
1076.160495758 = 1155.518533632 vmlinuz                                        1
1076.151256561 = 1155.508613120 vmlinuz.old                                    1
1070.979999542 = 1149.956018176 boot/initrd.img-3.13.0-133-generic             2
1070.960933685 = 1149.935546368 boot/initrd.img-3.13.0-135-generic             3
1076.170234680 = 1155.528990720 boot/initrd.img-3.13.0-92-generic              1
1070.960933685 = 1149.935546368 initrd.img                                     3
1070.979999542 = 1149.956018176 initrd.img.old                                 2

================= sdb10: Location of files loaded by Syslinux: =================

           GiB - GB             File                                 Fragment(s)

1076.208675385 = 1155.570266112 boot/extlinux/extlinux.conf                    1
1076.208698273 = 1155.570290688 boot/extlinux/chain.c32                        1

============== sdb10: Version of COM32(R) files used by Syslinux: ==============

 boot/extlinux/chain.c32            :  COM32R module (v4.xx)

========================== sdb12/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd2,msdos12'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos12 --hint-efi=hd2,msdos12 --hint-baremetal=ahci2,msdos12  f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
else
  search --no-floppy --fs-uuid --set=root f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'PT-Lubuntu-BRD-14.04 GNU/Linux' --class pt_lubuntu_brd_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f24fc5ee-4b70-46cd-aa29-25ba3f90caa3' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd2,msdos12'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos12 --hint-efi=hd2,msdos12 --hint-baremetal=ahci2,msdos12  f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
	else
	  search --no-floppy --fs-uuid --set=root f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
	fi
	linux	/boot/vmlinuz-3.13.0-135-generic root=/dev/sdc12 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-135-generic
}
submenu 'Options avancées pour PT-Lubuntu-BRD-14.04 GNU/Linux' $menuentry_id_option 'gnulinux-advanced-f24fc5ee-4b70-46cd-aa29-25ba3f90caa3' {
	menuentry 'PT-Lubuntu-BRD-14.04 GNU/Linux, avec Linux 3.13.0-135-generic' --class pt_lubuntu_brd_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-135-generic-advanced-f24fc5ee-4b70-46cd-aa29-25ba3f90caa3' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd2,msdos12'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos12 --hint-efi=hd2,msdos12 --hint-baremetal=ahci2,msdos12  f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
		else
		  search --no-floppy --fs-uuid --set=root f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
		fi
		echo	'Chargement de Linux 3.13.0-135-generic…'
		linux	/boot/vmlinuz-3.13.0-135-generic root=/dev/sdc12 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-135-generic
	}
	menuentry 'PT-Lubuntu-BRD-14.04 GNU/Linux, with Linux 3.13.0-135-generic (recovery mode)' --class pt_lubuntu_brd_14_04 --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-135-generic-recovery-f24fc5ee-4b70-46cd-aa29-25ba3f90caa3' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd2,msdos12'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos12 --hint-efi=hd2,msdos12 --hint-baremetal=ahci2,msdos12  f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
		else
		  search --no-floppy --fs-uuid --set=root f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
		fi
		echo	'Chargement de Linux 3.13.0-135-generic…'
		linux	/boot/vmlinuz-3.13.0-135-generic root=/dev/sdc12 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-135-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd2,msdos12'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos12 --hint-efi=hd2,msdos12 --hint-baremetal=ahci2,msdos12  f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
	else
	  search --no-floppy --fs-uuid --set=root f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd2,msdos12'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos12 --hint-efi=hd2,msdos12 --hint-baremetal=ahci2,msdos12  f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
	else
	  search --no-floppy --fs-uuid --set=root f24fc5ee-4b70-46cd-aa29-25ba3f90caa3
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb12/etc/fstab: ===============================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# /
UUID=f24fc5ee-4b70-46cd-aa29-25ba3f90caa3   /   ext4   noatime,errors=remount-ro   0   1
--------------------------------------------------------------------------------

=================== sdb12: Location of files loaded by Grub: ===================

           GiB - GB             File                                 Fragment(s)

1133.417425632 = 1216.997693952 boot/grub/grub.cfg                             1
1133.644842625 = 1217.241881088 boot/grub/i386-pc/core.img                     1
1133.412264347 = 1216.992152064 boot/vmlinuz-3.13.0-135-generic                1
1133.412264347 = 1216.992152064 vmlinuz                                        1
1121.442018986 = 1204.139198976 boot/initrd.img-3.13.0-135-generic             1
1121.442018986 = 1204.139198976 initrd.img                                     1

========================== sdb13/EFI/ubuntu/grub.cfg: ==========================

--------------------------------------------------------------------------------
search.fs_uuid 72a66c99-76c9-420b-b133-77d8811a67f5 root hd1,msdos15 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

========================== sdb15/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd3,msdos15'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos15 --hint-efi=hd3,msdos15 --hint-baremetal=ahci3,msdos15  1459d458-4677-4952-96ab-9455044611cb
else
  search --no-floppy --fs-uuid --set=root 1459d458-4677-4952-96ab-9455044611cb
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'PT-HYBRYDE FUSION 14.04_Massy GNU/Linux' --class pt_hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1459d458-4677-4952-96ab-9455044611cb' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd3,msdos15'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos15 --hint-efi=hd3,msdos15 --hint-baremetal=ahci3,msdos15  1459d458-4677-4952-96ab-9455044611cb
	else
	  search --no-floppy --fs-uuid --set=root 1459d458-4677-4952-96ab-9455044611cb
	fi
	linux	/boot/vmlinuz-3.13.0-170-generic root=UUID=1459d458-4677-4952-96ab-9455044611cb ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-170-generic
}
submenu 'Options avancées pour PT-HYBRYDE FUSION 14.04_Massy GNU/Linux' $menuentry_id_option 'gnulinux-advanced-1459d458-4677-4952-96ab-9455044611cb' {
	menuentry 'PT-HYBRYDE FUSION 14.04_Massy GNU/Linux, avec Linux 3.13.0-170-generic' --class pt_hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-170-generic-advanced-1459d458-4677-4952-96ab-9455044611cb' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos15'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos15 --hint-efi=hd3,msdos15 --hint-baremetal=ahci3,msdos15  1459d458-4677-4952-96ab-9455044611cb
		else
		  search --no-floppy --fs-uuid --set=root 1459d458-4677-4952-96ab-9455044611cb
		fi
		echo	'Chargement de Linux 3.13.0-170-generic…'
		linux	/boot/vmlinuz-3.13.0-170-generic root=UUID=1459d458-4677-4952-96ab-9455044611cb ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'PT-HYBRYDE FUSION 14.04_Massy GNU/Linux, with Linux 3.13.0-170-generic (recovery mode)' --class pt_hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-170-generic-recovery-1459d458-4677-4952-96ab-9455044611cb' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos15'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos15 --hint-efi=hd3,msdos15 --hint-baremetal=ahci3,msdos15  1459d458-4677-4952-96ab-9455044611cb
		else
		  search --no-floppy --fs-uuid --set=root 1459d458-4677-4952-96ab-9455044611cb
		fi
		echo	'Chargement de Linux 3.13.0-170-generic…'
		linux	/boot/vmlinuz-3.13.0-170-generic root=UUID=1459d458-4677-4952-96ab-9455044611cb ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-170-generic
	}
	menuentry 'PT-HYBRYDE FUSION 14.04_Massy GNU/Linux, avec Linux 3.13.0-169-generic' --class pt_hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-169-generic-advanced-1459d458-4677-4952-96ab-9455044611cb' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos15'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos15 --hint-efi=hd3,msdos15 --hint-baremetal=ahci3,msdos15  1459d458-4677-4952-96ab-9455044611cb
		else
		  search --no-floppy --fs-uuid --set=root 1459d458-4677-4952-96ab-9455044611cb
		fi
		echo	'Chargement de Linux 3.13.0-169-generic…'
		linux	/boot/vmlinuz-3.13.0-169-generic root=UUID=1459d458-4677-4952-96ab-9455044611cb ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-169-generic
	}
	menuentry 'PT-HYBRYDE FUSION 14.04_Massy GNU/Linux, with Linux 3.13.0-169-generic (recovery mode)' --class pt_hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-169-generic-recovery-1459d458-4677-4952-96ab-9455044611cb' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd3,msdos15'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos15 --hint-efi=hd3,msdos15 --hint-baremetal=ahci3,msdos15  1459d458-4677-4952-96ab-9455044611cb
		else
		  search --no-floppy --fs-uuid --set=root 1459d458-4677-4952-96ab-9455044611cb
		fi
		echo	'Chargement de Linux 3.13.0-169-generic…'
		linux	/boot/vmlinuz-3.13.0-169-generic root=UUID=1459d458-4677-4952-96ab-9455044611cb ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-169-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd3,msdos15'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos15 --hint-efi=hd3,msdos15 --hint-baremetal=ahci3,msdos15  1459d458-4677-4952-96ab-9455044611cb
	else
	  search --no-floppy --fs-uuid --set=root 1459d458-4677-4952-96ab-9455044611cb
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd3,msdos15'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd3,msdos15 --hint-efi=hd3,msdos15 --hint-baremetal=ahci3,msdos15  1459d458-4677-4952-96ab-9455044611cb
	else
	  search --no-floppy --fs-uuid --set=root 1459d458-4677-4952-96ab-9455044611cb
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.

### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb15/etc/fstab: ===============================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# SWAP
UUID=112856cf-033e-467d-bffd-fa4cf2212bed   none   swap   sw   0   0
# /
UUID=1459d458-4677-4952-96ab-9455044611cb   /   ext4   noatime,errors=remount-ro   0   1
--------------------------------------------------------------------------------

====================== sdb15/boot/extlinux/extlinux.conf: ======================

--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update


default l0
prompt 1
timeout 50

include themes/debian/theme.cfg
--------------------------------------------------------------------------------

=================== sdb15: Location of files loaded by Grub: ===================

           GiB - GB             File                                 Fragment(s)

1180.349479675 = 1267.390603264 boot/grub/grub.cfg                             1
1180.549995422 = 1267.605905408 boot/grub/i386-pc/core.img                     1
1180.357410431 = 1267.399118848 boot/vmlinuz-3.13.0-169-generic                1
1180.369098663 = 1267.411668992 boot/vmlinuz-3.13.0-170-generic                1
1180.369098663 = 1267.411668992 vmlinuz                                        1
1180.357410431 = 1267.399118848 vmlinuz.old                                    1
1163.279285431 = 1249.061621760 boot/initrd.img-3.13.0-169-generic             3
1163.248813629 = 1249.028902912 boot/initrd.img-3.13.0-170-generic             3
1163.248813629 = 1249.028902912 initrd.img                                     3
1163.279285431 = 1249.061621760 initrd.img.old                                 3

================= sdb15: Location of files loaded by Syslinux: =================

           GiB - GB             File                                 Fragment(s)

1180.363422394 = 1267.405574144 boot/extlinux/extlinux.conf                    1
1180.363407135 = 1267.405557760 boot/extlinux/chain.c32                        1

============== sdb15: Version of COM32(R) files used by Syslinux: ==============

 boot/extlinux/chain.c32            :  COM32R module (v4.xx)

========================== sdb16/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${initrdfail}" = 2 ]; then
   set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
   set next_entry="${prev_entry}"
   set prev_entry=
   save_env prev_entry
   if [ "${next_entry}" ]; then
      set initrdfail=2
   fi
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function initrdfail {
    if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
      if [ -z "${initrdfail}" ]; then
        set initrdfail=1
        if [ -n "${boot_once}" ]; then
          set prev_entry="${default}"
          save_env prev_entry
        fi
      fi
      save_env initrdfail
    fi; fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos16'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
else
  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-ed310eb9-852f-4b91-a1bc-552266569b41' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos16'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
	else
	  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
	fi
	linux	/boot/vmlinuz-5.4.0-47-generic root=UUID=ed310eb9-852f-4b91-a1bc-552266569b41 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-5.4.0-47-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-ed310eb9-852f-4b91-a1bc-552266569b41' {
	menuentry 'Ubuntu, avec Linux 5.4.0-47-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-47-generic-advanced-ed310eb9-852f-4b91-a1bc-552266569b41' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos16'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
		else
		  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
		fi
		echo	'Chargement de Linux 5.4.0-47-generic…'
		linux	/boot/vmlinuz-5.4.0-47-generic root=UUID=ed310eb9-852f-4b91-a1bc-552266569b41 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.4.0-47-generic
	}
	menuentry 'Ubuntu, avec Linux 5.4.0-47-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-47-generic-recovery-ed310eb9-852f-4b91-a1bc-552266569b41' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos16'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
		else
		  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
		fi
		echo	'Chargement de Linux 5.4.0-47-generic…'
		linux	/boot/vmlinuz-5.4.0-47-generic root=UUID=ed310eb9-852f-4b91-a1bc-552266569b41 ro recovery nomodeset dis_ucode_ldr 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.4.0-47-generic
	}
	menuentry 'Ubuntu, avec Linux 5.4.0-45-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-45-generic-advanced-ed310eb9-852f-4b91-a1bc-552266569b41' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos16'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
		else
		  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
		fi
		echo	'Chargement de Linux 5.4.0-45-generic…'
		linux	/boot/vmlinuz-5.4.0-45-generic root=UUID=ed310eb9-852f-4b91-a1bc-552266569b41 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.4.0-45-generic
	}
	menuentry 'Ubuntu, avec Linux 5.4.0-45-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-45-generic-recovery-ed310eb9-852f-4b91-a1bc-552266569b41' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos16'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
		else
		  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
		fi
		echo	'Chargement de Linux 5.4.0-45-generic…'
		linux	/boot/vmlinuz-5.4.0-45-generic root=UUID=ed310eb9-852f-4b91-a1bc-552266569b41 ro recovery nomodeset dis_ucode_ldr 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.4.0-45-generic
	}
	menuentry 'Ubuntu, avec Linux 5.4.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-42-generic-advanced-ed310eb9-852f-4b91-a1bc-552266569b41' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos16'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
		else
		  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
		fi
		echo	'Chargement de Linux 5.4.0-42-generic…'
		linux	/boot/vmlinuz-5.4.0-42-generic root=UUID=ed310eb9-852f-4b91-a1bc-552266569b41 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.4.0-42-generic
	}
	menuentry 'Ubuntu, avec Linux 5.4.0-42-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-42-generic-recovery-ed310eb9-852f-4b91-a1bc-552266569b41' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos16'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
		else
		  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
		fi
		echo	'Chargement de Linux 5.4.0-42-generic…'
		linux	/boot/vmlinuz-5.4.0-42-generic root=UUID=ed310eb9-852f-4b91-a1bc-552266569b41 ro recovery nomodeset dis_ucode_ldr 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.4.0-42-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_linux_zfs ###
### END /etc/grub.d/10_linux_zfs ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos16'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
	else
	  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos16'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos16 --hint-efi=hd1,msdos16 --hint-baremetal=ahci1,msdos16  ed310eb9-852f-4b91-a1bc-552266569b41
	else
	  search --no-floppy --fs-uuid --set=root ed310eb9-852f-4b91-a1bc-552266569b41
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb16/etc/fstab: ===============================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdc16 during installation
UUID=ed310eb9-852f-4b91-a1bc-552266569b41 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdc6 during installation
#UUID=6c7ae98d-a2b0-4ca1-bec0-38863dcb1d0a none            swap    sw              0       0
#Entry for /swapfile :
/file.swap none swap sw 0 0


--------------------------------------------------------------------------------

=================== sdb16: Location of files loaded by Grub: ===================

           GiB - GB             File                                 Fragment(s)

1255.782676697 = 1348.386381824 boot/grub/grub.cfg                             1
1238.821353912 = 1330.174300160 boot/grub/i386-pc/core.img                     1
1261.591922760 = 1354.624012288 boot/vmlinuz                                   1
1201.107540131 = 1289.679400960 boot/vmlinuz-5.4.0-42-generic                  2
1260.388797760 = 1353.332166656 boot/vmlinuz-5.4.0-45-generic                  1
1261.591922760 = 1354.624012288 boot/vmlinuz-5.4.0-47-generic                  1
1260.388797760 = 1353.332166656 boot/vmlinuz.old                               1
1261.927318573 = 1354.984140800 boot/initrd.img                                1
1236.942436218 = 1328.156827648 boot/initrd.img-5.4.0-42-generic               2
1260.608959198 = 1353.568563200 boot/initrd.img-5.4.0-45-generic               3
1261.927318573 = 1354.984140800 boot/initrd.img-5.4.0-47-generic               1
1260.608959198 = 1353.568563200 boot/initrd.img.old                            3


ADDITIONAL INFORMATION :
=================== log of boot-repair 20220816_0848 ===================
boot-repair version : 4ppa51
boot-sav version : 4ppa51
boot-sav-extra version : 4ppa51
glade2script version : 3.2.3~ppa2
boot-repair is executed in live-session (Boot-Repair-Disk 32bit 1oct2017, zesty, Ubuntu, i686)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=(loop)/casper/vmlinuz root=UUID=37C7-5656 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=latin9 iso-scan/filename=/boot-repair-disk-32bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
ls: cannot access '/home/usr/.config': No such file or directory

=================== os-prober:
/dev/sda2:Ubuntu 20.04.4 LTS (20.04):Ubuntu:linux
/dev/sdb10:Ubuntu 14.04.5 LTS (14.04):Ubuntu1:linux
/dev/sdb12:Ubuntu 14.04.5 LTS (14.04):Ubuntu2:linux
/dev/sdb15:Ubuntu 14.04.6 LTS (14.04):Ubuntu3:linux
/dev/sdb16:Ubuntu 20.04.1 LTS (20.04):Ubuntu4:linux
/dev/sdb2:Ubuntu 16.04.3 LTS (16.04):Ubuntu5:linux
/dev/sdb6:Ubuntu 10.04.4 LTS (10.04):Ubuntu6:linux
/dev/sdb8:Ubuntu 16.04.3 LTS (16.04):Ubuntu7:linux
/dev/sdb9:Ubuntu 16.04.3 LTS (16.04):Ubuntu8:linux

=================== blkid:
/dev/sda1: LABEL="windows-7-del" UUID="FA2AC6152AC5CF37" TYPE="ntfs" PARTUUID="00040603-01"
/dev/sdb1: LABEL="MULTISYSTEM" UUID="37C7-5656" TYPE="vfat" PARTUUID="0003f534-01"
/dev/loop0: UUID="2017-10-03-11-34-23-00" LABEL="Boot-Repair-Disk 32bit" TYPE="iso9660" PTUUID="2efade87" PTTYPE="dos"
/dev/loop1: TYPE="squashfs"
/dev/sda2: LABEL="ubuntu20.04-dell" UUID="9f5305b9-ddf9-4400-838d-7bb99f8b492f" TYPE="ext4" PARTUUID="00040603-02"
/dev/sdb2: LABEL="xub-16.04-sys-fc" UUID="41cfe47e-ddce-46f5-b890-088dc0d63ae7" TYPE="ext4" PARTUUID="0003f534-02"
/dev/sdb3: UUID="112856cf-033e-467d-bffd-fa4cf2212bed" TYPE="swap" PARTUUID="0003f534-03"
/dev/sdb5: LABEL="FC_HDD_NTFS" UUID="22F937315D85425C" TYPE="ntfs" PARTUUID="0003f534-05"
/dev/sdb6: LABEL="xub_syst_fc" UUID="4905a4bf-2813-4acc-ba88-2ffedd05b304" TYPE="ext4" PARTUUID="0003f534-06"
/dev/sdb7: LABEL="xub_hom_fc" UUID="978296e4-0a93-4e65-8d81-da7624af4de8" TYPE="ext4" PARTUUID="0003f534-07"
/dev/sdb8: LABEL="fusion-16.04-fc" UUID="3fbf070a-3c84-460f-9900-5152f7a0710a" TYPE="ext4" PARTUUID="0003f534-08"
/dev/sdb9: LABEL="ubu-mate-16.4-fc" UUID="832d59cb-cb26-449a-8608-065e2c8551a1" TYPE="ext4" PARTUUID="0003f534-09"
/dev/sdb10: LABEL="xub-14.04-sys-fc" UUID="1d5c84d5-a4bd-4aec-94da-0193cb862645" TYPE="ext4" PARTUUID="0003f534-0a"
/dev/sdb11: LABEL="xub-14.04-hom-fc" UUID="34e0d4bf-f41e-4e26-9285-6616b8ad790c" TYPE="ext4" PARTUUID="0003f534-0b"
/dev/sdb12: LABEL="lubu-brd-14-fc" UUID="f24fc5ee-4b70-46cd-aa29-25ba3f90caa3" TYPE="ext4" PARTUUID="0003f534-0c"
/dev/sdb13: UUID="92C8-E043" TYPE="vfat" PARTUUID="0003f534-0d"
/dev/sdb14: LABEL="xub-16.04-hom-fc" UUID="5ed68ab9-b2f8-4c4f-b250-59b3acc17ea5" TYPE="ext4" PARTUUID="0003f534-0e"
/dev/sdb15: LABEL="fusion-14.04-fc" UUID="1459d458-4677-4952-96ab-9455044611cb" TYPE="ext4" PARTUUID="0003f534-0f"
/dev/sdb16: LABEL="ubuntu-20.04-fc" UUID="ed310eb9-852f-4b91-a1bc-552266569b41" TYPE="ext4" PARTUUID="0003f534-10"
/dev/zram0: UUID="d2288811-408f-46f1-b346-904116e2378e" TYPE="swap"
/dev/zram1: UUID="e3f2c34e-8a96-4066-8eff-c6b2a3682553" TYPE="swap"
/dev/zram2: UUID="7b8d5086-08ec-4653-8065-f38407baee4f" TYPE="swap"
/dev/zram3: UUID="df023efd-d6e0-4cec-acec-d796976c57d0" TYPE="swap"


2 disks with OS, 9 OS : 9 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda1.
=================== No kernel in /isodevice/boot:
grub
grub.exe
img
kexec-loader.lst
multisystem.bs.save
polices
splash
syslinux


/isodevice/boot/grub/menu.lst detected

=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 avril 11 06:17 grub.d
total 136
-rwxr-xr-x 1 root root 10627 avril 15  2020 00_header
-rwxr-xr-x 1 root root  6258 avril 15  2020 05_debian_theme
-rwxr-xr-x 1 root root 18224 janv. 11  2022 10_linux
-rwxr-xr-x 1 root root 42359 août  17  2020 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15  2020 20_linux_xen
-rwxr-xr-x 1 root root  1992 févr. 13  2020 20_memtest86+
-rwxr-xr-x 1 root root 12059 avril 15  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 avril 15  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   700 févr. 21 03:06 35_fwupd
-rwxr-xr-x 1 root root   214 avril 15  2020 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2020 41_custom
-rw-r--r-- 1 root root   483 avril 15  2020 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_DISABLE_OS_PROBER=false




=================== /media/lubuntu/xub-16.04-sys-fc/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 oct.  31  2017 grub.d
drwxr-xr-x  2 root root     4096 mars  14  2017 grub.d.bak
total 76
-rwxr-xr-x 1 root root  9791 mars   1  2017 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mars   1  2017 10_linux
-rwxr-xr-x 1 root root 11082 mars   1  2017 20_linux_xen
-rw-r--r-- 1 root root 11692 mars   1  2017 30_os-prober
-rwxr-xr-x 1 root root  1418 mars   1  2017 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mars   1  2017 40_custom
-rwxr-xr-x 1 root root   216 mars   1  2017 41_custom
-rw-r--r-- 1 root root   483 mars   1  2017 README




=================== /media/lubuntu/xub-16.04-sys-fc/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_SAVEDEFAULT="true"
GRUB_DEFAULT="saved"
#GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`echo -n PT-Xubuntu-16.04`
#GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sdb2saved_entry=gnulinux-simple-41cfe47e-ddce-46f5-b890-088dc0d63ae7/grub/grubenv :
saved_entry=gnulinux-simple-41cfe47e-ddce-46f5-b890-088dc0d63ae7




=================== /media/lubuntu/xub_syst_fc/etc/grub.d/ :
drwxr-xr-x  2 root root             4096 avril 12  2012 grub.d
total 44
-rwxr-xr-x 1 root root 4434 oct.   8  2010 00_header
-rwxr-xr-x 1 root root 1416 avril 29  2010 05_debian_theme
-rwxr-xr-x 1 root root 4843 janv. 20  2011 10_linux
-rwxr-xr-x 1 root root  918 mars  23  2010 20_memtest86+
-rw-r--r-- 1 root root 6605 avril 29  2010 30_os-prober
-rwxr-xr-x 1 root root  214 oct.  24  2009 40_custom
-rwxr-xr-x 1 root root  278 juin  29  2011 40_multisystem
-rw-r--r-- 1 root root  483 oct.  24  2009 README




=================== /media/lubuntu/xub_syst_fc/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=" vga=758"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=1280.1024

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== /media/lubuntu/fusion-16.04-fc/etc/grub.d/ :
drwxr-xr-x  2 root root              4096 déc.  11  2017 grub.d
drwxr-xr-x  2 root root              4096 déc.  19  2016 grub.d.bak
total 76
-rwxr-xr-x 1 root root  9791 juil. 23  2016 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 oct.  12  2017 10_linux
-rwxr-xr-x 1 root root 11082 juil. 23  2016 20_linux_xen
-rw-r--r-- 1 root root 11692 juil. 23  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 23  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 23  2016 40_custom
-rwxr-xr-x 1 root root   216 juil. 23  2016 41_custom
-rw-r--r-- 1 root root   483 juil. 23  2016 README




=================== /media/lubuntu/fusion-16.04-fc/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== /media/lubuntu/ubu-mate-16.4-fc/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 oct.  31  2017 grub.d
total 80
-rwxr-xr-x 1 root root  9791 avril 15  2016 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mars   1  2017 10_linux
-rwxr-xr-x 1 root root 11082 avril 15  2016 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rw-r--r-- 1 root root 11692 avril 15  2016 30_os-prober
-rwxr-xr-x 1 root root  1418 avril 15  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 15  2016 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2016 41_custom
-rw-r--r-- 1 root root   483 avril 15  2016 README




=================== /media/lubuntu/ubu-mate-16.4-fc/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
#GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_DISTRIBUTOR=`echo -n PT-UBUNTU-MATE 16.04`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== /media/lubuntu/xub-14.04-sys-fc/etc/grub.d/ :
drwxr-xr-x  2 root root               4096 sept.  4  2017 grub.d
drwxr-xr-x  2 root root               4096 nov.  13  2012 grub.d.bak
total 76
-rwxr-xr-x 1 root root  9791 déc.  19  2015 00_header
-rwxr-xr-x 1 root root  6058 mai    8  2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai   15  2014 10_linux
-rwxr-xr-x 1 root root 10412 mai   15  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rw-r--r-- 1 root root 11692 mai   15  2014 30_os-prober
-rwxr-xr-x 1 root root  1418 août   2  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 sept. 12  2012 40_custom
-rwxr-xr-x 1 root root   216 mai   15  2014 41_custom
-rw-r--r-- 1 root root   483 sept. 12  2012 README




=================== /media/lubuntu/xub-14.04-sys-fc/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_SAVEDEFAULT="true"
GRUB_DEFAULT="saved"
#GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`echo -n PT-Xubuntu-14.04`
#GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sdb10saved_entry=gnulinux-simple-1d5c84d5-a4bd-4aec-94da-0193cb862645/grub/grubenv :
saved_entry=gnulinux-simple-1d5c84d5-a4bd-4aec-94da-0193cb862645




=================== /media/lubuntu/lubu-brd-14-fc/etc/grub.d/ :
drwxr-xr-x  2 root root               4096 sept.  4  2017 grub.d
total 76
-rwxr-xr-x 1 root root  9791 déc.  19  2015 00_header
-rwxr-xr-x 1 root root  6058 mai    8  2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai   15  2014 10_linux
-rwxr-xr-x 1 root root 10412 mai   15  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rw-r--r-- 1 root root 11692 mai   15  2014 30_os-prober
-rwxr-xr-x 1 root root  1418 août   2  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mai   15  2014 40_custom
-rwxr-xr-x 1 root root   216 mai   15  2014 41_custom
-rw-r--r-- 1 root root   483 mai   15  2014 README




=================== /media/lubuntu/lubu-brd-14-fc/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
#GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_DISTRIBUTOR=`echo -n PT-Lubuntu-BRD-14.04`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== /media/lubuntu/fusion-14.04-fc/etc/grub.d/ :
drwxr-xr-x  2 root root              4096 mai    2  2019 grub.d
total 80
-rwxr-xr-x 1 root root  9791 déc.  19  2015 00_header
-rwxr-xr-x 1 root root  6058 avril 10  2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11  2014 10_linux
-rwxr-xr-x 1 root root 10412 avril 11  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rw-r--r-- 1 root root 11692 avril 11  2014 30_os-prober
-rwxr-xr-x 1 root root  1418 août   2  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   215 mai   31  2015 40_custom
-rwxr-xr-x 1 root root   811 mai   31  2015 40_custom~
-rwxr-xr-x 1 root root   216 avril  9  2013 41_custom
-rw-r--r-- 1 root root   483 avril  9  2013 README




=================== /media/lubuntu/fusion-14.04-fc/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
#GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_DISTRIBUTOR=`echo -n PT-HYBRYDE FUSION 14.04_Massy`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

GRUB_BACKGROUND="/etc/remastersys/grub.jpg"




=================== /media/lubuntu/ubuntu-20.04-fc/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 sept. 10  2020 grub.d
total 132
-rwxr-xr-x 1 root root 10627 avril 15  2020 00_header
-rwxr-xr-x 1 root root  6258 avril 15  2020 05_debian_theme
-rwxr-xr-x 1 root root 17622 août  17  2020 10_linux
-rwxr-xr-x 1 root root 42359 août  17  2020 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15  2020 20_linux_xen
-rwxr-xr-x 1 root root  1992 févr. 13  2020 20_memtest86+
-rw-r--r-- 1 root root 12059 avril 15  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 avril 15  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 15  2020 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2020 41_custom
-rw-r--r-- 1 root root   483 avril 15  2020 README




=================== /media/lubuntu/ubuntu-20.04-fc/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== efibootmgr -v
EFI variables are not supported on this system.

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
Unusual EFI: Veuillez indiquer ce message à boot.repair@gmail.com
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /isodevice.
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda2.
sdb2	: sdb,	not-sepboot,	grubenv-ng	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/xub-16.04-sys-fc.
sdb5	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/FC_HDD_NTFS.
sdb6	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/xub_syst_fc.
sdb7	: sdb,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/xub_hom_fc.
sdb8	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/fusion-16.04-fc.
sdb9	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc grub-efi ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/ubu-mate-16.4-fc.
sdb10	: sdb,	not-sepboot,	grubenv-ng	grub2,	grub-pc grub-efi ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/xub-14.04-sys-fc.
sdb11	: sdb,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/xub-14.04-hom-fc.
sdb12	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc grub-efi ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/lubu-brd-14-fc.
sdb13	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdb13.
sdb14	: sdb,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/xub-16.04-hom-fc.
sdb15	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc grub-efi ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/fusion-14.04-fc.
sdb16	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /media/lubuntu/ubuntu-20.04-fc.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-correctEFI, 	liveusb,	not-mmc, has-os,	63 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:120GB:scsi:512:512:msdos:ATA LDLC:;
1:1049kB:28.9GB:28.9GB:ntfs::boot;
2:28.9GB:120GB:91.2GB:ext4::;

BYT;
/dev/sdb:1500GB:scsi:512:512:msdos:Freecom Hard Drive XS:;
1:32.3kB:108GB:108GB:fat32::boot;
2:108GB:136GB:27.8GB:ext4::;
3:136GB:139GB:2730MB:linux-swap(v1)::;
4:139GB:1500GB:1362GB:::;
9:139GB:159GB:20.2GB:ext4::;
13:159GB:159GB:419MB:fat32::esp;
8:160GB:193GB:33.3GB:ext4::;
5:193GB:1149GB:956GB:ntfs::;
10:1149GB:1167GB:17.7GB:ext4::;
11:1167GB:1204GB:37.3GB:ext4::;
12:1204GB:1226GB:22.5GB:ext4::;
15:1226GB:1289GB:62.9GB:ext4::;
16:1289GB:1361GB:71.5GB:ext4::;
14:1361GB:1383GB:22.5GB:ext4::;
6:1388GB:1405GB:16.6GB:ext4::;
7:1405GB:1500GB:95.8GB:ext4::;

BYT;
/dev/zram3:495MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:495MB:495MB:linux-swap(v1)::;

BYT;
/dev/zram1:495MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:495MB:495MB:linux-swap(v1)::;

BYT;
/dev/zram2:495MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:495MB:495MB:linux-swap(v1)::;

BYT;
/dev/zram0:495MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:495MB:495MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop iso9660    805M Boot-Repair-Disk 32bit
loop1 loop squashfs 753,1M
sda   disk          111,8G
sda1  part ntfs      26,9G windows-7-del
sda2  part ext4      84,9G ubuntu20.04-dell
sdb   disk            1,4T
sdb1  part vfat     100,6G MULTISYSTEM
sdb2  part ext4        26G xub-16.04-sys-fc
sdb3  part swap       2,6G
sdb4  part              1K
sdb5  part ntfs     890,2G FC_HDD_NTFS
sdb6  part ext4      15,5G xub_syst_fc
sdb7  part ext4      89,2G xub_hom_fc
sdb8  part ext4        31G fusion-16.04-fc
sdb9  part ext4      18,8G ubu-mate-16.4-fc
sdb10 part ext4      16,5G xub-14.04-sys-fc
sdb11 part ext4      34,8G xub-14.04-hom-fc
sdb12 part ext4        21G lubu-brd-14-fc
sdb13 part vfat       400M
sdb14 part ext4        21G xub-16.04-hom-fc
sdb15 part ext4      58,6G fusion-14.04-fc
sr0   rom            1024M
zram0 disk          472,5M
zram1 disk          472,5M
zram2 disk          472,5M
zram3 disk          472,5M
sdb16 part ext4      66,6G ubuntu-20.04-fc

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  0  0         /cdrom
loop1    1  1  0         /rofs
sda      0  0  0 running
sda1     0  0  0         /mnt/boot-sav/sda1
sda2     0  0  0         /mnt/boot-sav/sda2
sdb      1  0  0 running
sdb1     1  0  0         /isodevice
sdb2     1  0  0         /media/lubuntu/xub-16.04-sys-fc
sdb3     1  0  0         [SWAP]
sdb4     1  0  0
sdb5     1  0  0         /media/lubuntu/FC_HDD_NTFS
sdb6     1  0  0         /media/lubuntu/xub_syst_fc
sdb7     1  0  0         /media/lubuntu/xub_hom_fc
sdb8     1  0  0         /media/lubuntu/fusion-16.04-fc
sdb9     1  0  0         /media/lubuntu/ubu-mate-16.4-fc
sdb10    1  0  0         /media/lubuntu/xub-14.04-sys-fc
sdb11    1  0  0         /media/lubuntu/xub-14.04-hom-fc
sdb12    1  0  0         /media/lubuntu/lubu-brd-14-fc
sdb13    1  0  0         /mnt/boot-sav/sdb13
sdb14    1  0  0         /media/lubuntu/xub-16.04-hom-fc
sdb15    1  0  0         /media/lubuntu/fusion-14.04-fc
sr0      1  0  1 running
zram0    0  0  0         [SWAP]
zram1    0  0  0         [SWAP]
zram2    0  0  0         [SWAP]
zram3    0  0  0         [SWAP]
sdb16    1  0  0         /media/lubuntu/ubuntu-20.04-fc


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1913964k,nr_inodes=203532,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=387056k,mode=755)
/dev/sdb1 on /isodevice type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /cdrom type iso9660 (ro,noatime)
/dev/loop1 on /rofs type squashfs (ro,noatime)
aufs on / type aufs (rw,noatime,si=bd77e675)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=19704)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=387052k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sdb9 on /media/lubuntu/ubu-mate-16.4-fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb8 on /media/lubuntu/fusion-16.04-fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb7 on /media/lubuntu/xub_hom_fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb6 on /media/lubuntu/xub_syst_fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb5 on /media/lubuntu/FC_HDD_NTFS type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
/dev/sdb2 on /media/lubuntu/xub-16.04-sys-fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb16 on /media/lubuntu/ubuntu-20.04-fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb15 on /media/lubuntu/fusion-14.04-fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb14 on /media/lubuntu/xub-16.04-hom-fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb12 on /media/lubuntu/lubu-brd-14-fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb11 on /media/lubuntu/xub-14.04-hom-fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb10 on /media/lubuntu/xub-14.04-sys-fc type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime,data=ordered)
/dev/sdb13 on /mnt/boot-sav/sdb13 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=================== ls:
/sys/block/sda (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 drm_dp_aux2 dvd dvdrw ecryptfs fb0 fd freefall full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  fd 4f 5c 03 00 00 00 00  |.........O.....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  37 cf c5 2a 15 c6 2a fa  |........7..*..*.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 58 90 53 59 53 4c 49  4e 55 58 00 02 20 20 00  |.X.SYSLINUX..  .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  ce 52 93 0c 20 c9 00 00  00 00 00 00 02 00 00 00  |.R.. ...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 01 29 56 56 c7 37 4d  55 4c 54 49 53 59 53 54  |..)VV.7MULTISYST|
00000050  45 4d 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |EMFAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d f8 50 50 50 50 cd  13 eb 62 8b 55 aa 8b 75  |.M.PPPP...b.U..u|
000000a0  a8 c1 ee 04 01 f2 83 fa  4f 76 31 81 fa b2 07 73  |........Ov1....s|
000000b0  2b f6 45 b4 7f 75 25 38  4d b8 74 20 66 3d 21 47  |+.E..u%8M.t f=!G|
000000c0  50 54 75 10 80 7d b8 ed  75 0a 66 ff 75 ec 66 ff  |PTu..}..u.f.u.f.|
000000d0  75 e8 eb 0f 51 51 66 ff  75 bc eb 07 51 51 66 ff  |u...QQf.u...QQf.|
000000e0  36 1c 7c b4 08 e8 e9 00  72 13 20 e4 75 0f c1 ea  |6.|.....r. .u...|
000000f0  08 42 89 16 1a 7c 83 e1  3f 89 0e 18 7c fb bb aa  |.B...|..?...|...|
00000100  55 b4 41 e8 cb 00 72 10  81 fb 55 aa 75 0a f6 c1  |U.A...r...U.u...|
00000110  01 74 05 c6 06 46 7d 00  66 b8 20 02 34 00 66 ba  |.t...F}.f. .4.f.|
00000120  00 00 00 00 bb 00 80 e8  0e 00 66 81 3e 1c 80 c4  |..........f.>...|
00000130  60 90 6f 75 74 e9 f8 02  66 03 06 60 7b 66 13 16  |`.out...f..`{f..|
00000140  64 7b b9 10 00 eb 2b 66  52 66 50 06 53 6a 01 6a  |d{....+fRfP.Sj.j|
00000150  10 89 e6 66 60 b4 42 e8  77 00 66 61 8d 64 10 72  |...f`.B.w.fa.d.r|
00000160  01 c3 66 60 31 c0 e8 68  00 66 61 e2 da c6 06 46  |..f`1..h.fa....F|
00000170  7d 2b 66 60 66 0f b7 36  18 7c 66 0f b7 3e 1a 7c  |}+f`f..6.|f..>.||
00000180  66 f7 f6 31 c9 87 ca 66  f7 f7 66 3d ff 03 00 00  |f..1...f..f=....|
00000190  77 17 c0 e4 06 41 08 e1  88 c5 88 d6 b8 01 02 e8  |w....A..........|
000001a0  2f 00 66 61 72 01 c3 e2  c9 31 f6 8e d6 bc 68 7b  |/.far....1....h{|
000001b0  8e de 66 8f 06 78 00 be  da 7d ac 20 c0 74 09 b4  |..f..x...}. .t..|
000001c0  0e bb 07 00 cd 10 eb f2  31 c0 cd 16 cd 19 f4 eb  |........1.......|
000001d0  fd 8a 16 74 7b 06 cd 13  07 c3 42 6f 6f 74 20 65  |...t{.....Boot e|
000001e0  72 72 6f 72 0d 0a 00 00  00 00 00 00 00 00 00 00  |rror............|
000001f0  00 00 00 00 00 00 00 00  fe 02 b2 3e 18 37 55 aa  |...........>.7U.|
00000200

=================== hexdump -n512 -C /dev/sdb5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 ef bf 79 16  |........?.....y.|
00000020  00 00 00 00 80 00 80 00  08 b8 46 6f 00 00 00 00  |..........Fo....|
00000030  04 00 00 00 00 00 00 00  75 ea 82 09 00 00 00 00  |........u.......|
00000040  f6 00 00 00 01 00 00 00  5c 42 85 5d 31 37 f9 22  |........B.]17."|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb13
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  20 00 40 00 00 70 00 02  |........ .@..p..|
00000020  00 80 0c 00 1f 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 43 e0 c8 92 20  20 20 20 20 20 20 20 20  |..)C...         |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     378M  6.2M  372M   2% /run
/dev/sdb1      vfat      101G   40G   61G  40% /isodevice
/dev/loop0     iso9660   805M  805M     0 100% /cdrom
/dev/loop1     squashfs  754M  754M     0 100% /rofs
aufs           aufs      1.9G  5.3M  1.9G   1% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     1.9G  4.0K  1.9G   1% /tmp
tmpfs          tmpfs     378M  4.0K  378M   1% /run/user/999
/dev/sdb9      ext4       19G  7.1G   11G  41% /media/lubuntu/ubu-mate-16.4-fc
/dev/sdb8      ext4       31G  9.5G   20G  33% /media/lubuntu/fusion-16.04-fc
/dev/sdb7      ext4       88G   15G   69G  18% /media/lubuntu/xub_hom_fc
/dev/sdb6      ext4       16G  5.1G  9.4G  36% /media/lubuntu/xub_syst_fc
/dev/sdb5      fuseblk   891G  820G   71G  93% /media/lubuntu/FC_HDD_NTFS
/dev/sdb2      ext4       26G  5.8G   19G  24% /media/lubuntu/xub-16.04-sys-fc
/dev/sdb16     ext4       66G   58G  5.1G  92% /media/lubuntu/ubuntu-20.04-fc
/dev/sdb15     ext4       58G   36G   20G  65% /media/lubuntu/fusion-14.04-fc
/dev/sdb14     ext4       21G   19G  715M  97% /media/lubuntu/xub-16.04-hom-fc
/dev/sdb12     ext4       21G  3.9G   16G  21% /media/lubuntu/lubu-brd-14-fc
/dev/sdb11     ext4       35G   19G   14G  59% /media/lubuntu/xub-14.04-hom-fc
/dev/sdb10     ext4       17G  6.4G  8.9G  42% /media/lubuntu/xub-14.04-sys-fc
/dev/sda1      fuseblk    27G   24G  3.3G  89% /mnt/boot-sav/sda1
/dev/sda2      ext4       84G   76G  3.1G  97% /mnt/boot-sav/sda2
/dev/sdb13     vfat      400M  3.4M  396M   1% /mnt/boot-sav/sdb13

=================== fdisk -l:
Disk /dev/loop0: 805 MiB, 844103680 bytes, 1648640 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x2efade87

Device       Boot Start     End Sectors  Size Id Type
/dev/loop0p1 *        0 1648639 1648640  805M 17 Hidden HPFS/NTFS


Disk /dev/loop1: 753.1 MiB, 789712896 bytes, 1542408 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00040603

Device     Boot    Start       End   Sectors  Size Id Type
/dev/sda1  *        2048  56383487  56381440 26.9G  7 HPFS/NTFS/exFAT
/dev/sda2       56383488 234440703 178057216 84.9G 83 Linux




Disk /dev/sdb: 1.4 TiB, 1500301910016 bytes, 2930277168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0003f534

Device     Boot      Start        End    Sectors   Size Id Type
/dev/sdb1  *            63  210981644  210981582 100.6G  b W95 FAT32
/dev/sdb2        210981645  265363455   54381811    26G 83 Linux
/dev/sdb3        265363456  270696447    5332992   2.6G 82 Linux swap / Solaris
/dev/sdb4        270698494 2930272064 2659573571   1.2T  5 Extended
/dev/sdb5        377077743 2243983359 1866905617 890.2G  7 HPFS/NTFS/exFAT
/dev/sdb6       2710711773 2743195139   32483367  15.5G 83 Linux
/dev/sdb7       2743195203 2930272064  187076862  89.2G 83 Linux
/dev/sdb8        311966298  377077626   65111329    31G 83 Linux
/dev/sdb9        270698496  310065151   39366656  18.8G 83 Linux
/dev/sdb10      2243985408 2278559743   34574336  16.5G 83 Linux
/dev/sdb11      2278561792 2351484927   72923136  34.8G 83 Linux
/dev/sdb12      2351498373 2395404622   43906250    21G 83 Linux
/dev/sdb13       310067200  310886399     819200   400M ef EFI (FAT-12/16/32)
/dev/sdb14      2658041856 2702063615   44021760    21G 83 Linux
/dev/sdb15      2395408384 2518323199  122914816  58.6G 83 Linux
/dev/sdb16      2518325248 2658039807  139714560  66.6G 83 Linux

Partition table entries are not in disk order.


Disk /dev/zram0: 472.5 MiB, 495427584 bytes, 120954 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram1: 472.5 MiB, 495427584 bytes, 120954 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram2: 472.5 MiB, 495427584 bytes, 120954 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram3: 472.5 MiB, 495427584 bytes, 120954 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes



(zenity:17089): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:23:18: not a number

(zenity:17089): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:23:18: Expected a string.

(zenity:17089): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:815:10: not a number

(zenity:17089): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:815:24: Using Pango syntax for the font: style property is deprecated; please use CSS syntax

(zenity:17089): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1953:14: not a number

(zenity:17089): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1953:14: Expected a string.

(zenity:17089): Gtk-WARNING **: Theme parsing error: nautilus.css:50:71: Using one color stop with linear-gradient() is deprecated.

(zenity:17089): Gtk-WARNING **: Theme parsing error: nautilus.css:51:71: Using one color stop with linear-gradient() is deprecated.

(zenity:17089): Gtk-WARNING **: Theme parsing error: gtk-lubuntu.css:252:14: not a number

(zenity:17089): Gtk-WARNING **: Theme parsing error: gtk-lubuntu.css:252:14: Expected a string.
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
User choice: Est-ce que sdb (Freecom Hard Drive XS) est un disque amovible ? yes




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sdb2 into the MBR of sdb.
It would also fix access to other systems (other MBRs) for the situations when the removable media is disconnected.
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque amovible !

Les fichiers de démarrage de [Ubuntu 16.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Voila mes "bidouilles" si ça peut être intéressant, à faire de même sur une grosse clé USB.

Remarques;
En démarrant une session live iso MultiSysyem, on peut depuis les menus du MultiSystem mettre de la persistance dans une ou des iso, pour retrouver ses données des session live persitente antérieur.

Pour toutes infos sur le MultiSystem il n'y a qu'a tapper MultiSystem dans votre moteur de recherche.
Dans les pages du site on y trouve une page qui indique la longue listes des iso prise en compte par le MultiSystem
Ce soft est encore pris en compte puisque de temps à autre il y des maj proposées.

@+. Babdu89 .

Dernière modification par Babdu89 (Le 16/08/2022, à 11:51)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 14/08/2022, à 14:28

Ecrire un ISO sur une partition de clé USB

#2 Le 14/08/2022, à 14:36

Re : Ecrire un ISO sur une partition de clé USB

#3 Le 14/08/2022, à 15:38

Re : Ecrire un ISO sur une partition de clé USB

#4 Le 14/08/2022, à 18:39

Re : Ecrire un ISO sur une partition de clé USB

#5 Le 14/08/2022, à 18:56

Re : Ecrire un ISO sur une partition de clé USB

#6 Le 14/08/2022, à 19:00

Re : Ecrire un ISO sur une partition de clé USB

#7 Le 14/08/2022, à 20:59

Re : Ecrire un ISO sur une partition de clé USB

#8 Le 14/08/2022, à 21:35

Re : Ecrire un ISO sur une partition de clé USB

#9 Le 14/08/2022, à 21:56

Re : Ecrire un ISO sur une partition de clé USB

#10 Le 14/08/2022, à 21:58

Re : Ecrire un ISO sur une partition de clé USB

#11 Le 14/08/2022, à 22:34

Re : Ecrire un ISO sur une partition de clé USB

#12 Le 14/08/2022, à 22:50

Re : Ecrire un ISO sur une partition de clé USB

#13 Le 14/08/2022, à 22:55

Re : Ecrire un ISO sur une partition de clé USB

#14 Le 14/08/2022, à 22:56

Re : Ecrire un ISO sur une partition de clé USB

#15 Le 14/08/2022, à 22:59

Re : Ecrire un ISO sur une partition de clé USB

#16 Le 14/08/2022, à 23:23

Re : Ecrire un ISO sur une partition de clé USB

#17 Le 14/08/2022, à 23:38

Re : Ecrire un ISO sur une partition de clé USB

#18 Le 15/08/2022, à 11:36

Re : Ecrire un ISO sur une partition de clé USB

#19 Le 15/08/2022, à 13:07

Re : Ecrire un ISO sur une partition de clé USB

#20 Le 15/08/2022, à 16:39

Re : Ecrire un ISO sur une partition de clé USB

#21 Le 15/08/2022, à 21:06

Re : Ecrire un ISO sur une partition de clé USB

#22 Le 15/08/2022, à 21:21

Re : Ecrire un ISO sur une partition de clé USB

#23 Le 16/08/2022, à 08:15

Re : Ecrire un ISO sur une partition de clé USB

#24 Le 16/08/2022, à 08:45

Re : Ecrire un ISO sur une partition de clé USB

#25 Le 16/08/2022, à 09:33

Re : Ecrire un ISO sur une partition de clé USB

Pied de page des forums