Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2

#26 Le 24/10/2009, à 17:12

patacoincoin

Re : [résolu] pas de wifi avec easy peasy 1.5

pour ta 2eme solution j'ai ça  qd je relance networking :
* Reconfiguring network interfaces...                                                                                       /etc/network/interfaces:6: duplicate option
ifdown: couldn't read interfaces file "/etc/network/interfaces"
/etc/network/interfaces:6: duplicate option
ifup: couldn't read interfaces file "/etc/network/interfaces"

Hors ligne

#27 Le 24/10/2009, à 17:24

patacoincoin

Re : [résolu] pas de wifi avec easy peasy 1.5

à mon tour de partir pour aujourd'hui... on m'attend
merci pour tout

Hors ligne

#28 Le 24/10/2009, à 18:27

willy78

Re : [résolu] pas de wifi avec easy peasy 1.5

fais le poste #23

Si rien voici une modif suivant les nouveaux lien!
l'adresse des driver chez Ralink a changée
voici la bonne
http://wlety.free.fr/rt2860/2009_0918_R … .0.tar.bz2

Remplaces tous le contenu du fichier ins_rt2860sta.sh
par:

#---------------------------debut ci dessous------------------------------------------------
#! /bin/sh
#réservé aux eeepc avec carte ralink rt2860
#driver version 2.1.2.0
apt-get install --assume-yes -q build-essential
wget http://wlety.free.fr/rt2860/2009_0918_RT2860_Linux_STA_v2.2.0.0.tar.bz2
tar -jxvf 2009_0918_RT2860_Linux_STA_v2.2.0.0.tar.bz2
#
sed 's/HAS_WPA_SUPPLICANT=n/HAS_WPA_SUPPLICANT=y/' 2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/config.mk
sed 's/HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n/HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y/' 2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/config.mk
cd 2009_0918_RT2860_Linux_STA_v2.2.0.0
make
make install
echo 'rt2860sta' | tee -a /etc/modules
chmod +x /etc/Wireless/RT2860STA/RT2860STA.dat
modprobe rt2860sta
ifconfig ra0 up
/etc/init.d/networking restart
#-----------------------------fin ci dessus--------------------------------------------------------

Dernière modification par willy78 (Le 24/10/2009, à 18:34)

Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum

Hors ligne

#29 Le 25/10/2009, à 09:14

patacoincoin

Re : [résolu] pas de wifi avec easy peasy 1.5

je viens de rallumer le pc, et il n'est plus connecté.
Pour avoir une connexion, je suis obligé (c'est comme ça que j'ai réussi) de lancer wifi radar dans un terminal et là j'ai :

"ra0       Interface doesn't support scanning : Network is down" répété une dizaine de fois et quand je clique dans l'interface graphique de wifi radar, il liste les réseaux existants et se connecte au mien. voilà ce qu'il marque :

Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device ra0 ; Network is down.
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

Unsupported driver '-P'.

Listening on LPF/ra0/00:15:af:dc:01:05
Sending on   LPF/ra0/00:15:af:dc:01:05
Sending on   Socket/fallback
DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 6
DHCPOFFER of 192.168.0.11 from 192.168.0.254
DHCPREQUEST of 192.168.0.11 on ra0 to 255.255.255.255 port 67
DHCPACK of 192.168.0.11 from 192.168.0.254
bound to 192.168.0.11 -- renewal in 407367 seconds.



En ce qui concerne le post 23, j'ai toujours le résultat suivant :

* Reconfiguring network interfaces...                                                                                       /etc/network/interfaces:7: duplicate option
ifdown: couldn't read interfaces file "/etc/network/interfaces"
/etc/network/interfaces:7: duplicate option
ifup: couldn't read interfaces file "/etc/network/interfaces"


Pour la modification du fichier :

Lecture des listes de paquets...
Construction de l'arbre des dépendances...
Lecture des informations d'état...
build-essential est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-backports-modules-2.6.28-15-generic
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
--2009-10-25 08:12:00--  http://wlety.free.fr/rt2860/2009_0918_R
Résolution de wlety.free.fr... 212.27.63.156
Connexion vers wlety.free.fr|212.27.63.156|:80... connecté.
requête HTTP transmise, en attente de la réponse... 404 Not Found
2009-10-25 08:12:01 ERREUR 404: Not Found.

--2009-10-25 08:12:01--  http://%E2%80%A6/
Résolution de \342\200\246... échec: Nom ou service inconnu.
wget: unable to resolve host address `…'
--2009-10-25 08:12:01--  http://.0.tar.bz2/
Résolution de .0.tar.bz2... échec: Nom ou service inconnu.
wget: unable to resolve host address `.0.tar.bz2'
tar: 2009_0918_RT2860_Linux_STA_v2.2.0.0.tar.bz2 : la fonction open a échoué: Aucun fichier ou dossier de ce type
tar: Erreur non récupérable : arrêt du traitement
tar: Child returned status 2
tar: Des erreurs ont provoqué l'arrêt du programme
sed: impossible de lire 2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/config.mk: Aucun fichier ou dossier de ce type
sed: impossible de lire 2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/config.mk: Aucun fichier ou dossier de ce type
cd: 10: can't cd to 2009_0918_RT2860_Linux_STA_v2.2.0.0
make: *** Pas de cibles spécifiées et aucun makefile n'a été trouvé. Arrêt.
make: *** Pas de règle pour fabriquer la cible « install ». Arrêt.
rt2860sta
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/eee-control, it will be ignored in a future release.
* Reconfiguring network interfaces...                                                                                       /etc/network/interfaces:6: duplicate option
ifdown: couldn't read interfaces file "/etc/network/interfaces"
/etc/network/interfaces:6: duplicate option
ifup: couldn't read interfaces file "/etc/network/interfaces"

Dernière modification par patacoincoin (Le 25/10/2009, à 09:55)

Hors ligne

#30 Le 26/10/2009, à 21:35

willy78

Re : [résolu] pas de wifi avec easy peasy 1.5

regarde la gueule du lien que je te donne:
http://wlety.free.fr/rt2860/2009_0918_RT2860_Linux_STA_v2.2.0.0.tar.bz2
et le tien
http://wlety.free.fr/rt2860/2009_0918_R

devines ou est l'erreur

PS un lien se copie avec
clique droit
copier l'adresse du lien
sinon il est tronqué pour affichage dans le forum

Dernière modification par willy78 (Le 26/10/2009, à 21:36)

Quelques tutos pour le wifi sous Ubuntu:
http://wlety.free.fr/forum

Hors ligne

#31 Le 27/10/2009, à 19:46

patacoincoin

Re : [résolu] pas de wifi avec easy peasy 1.5

j'ai rectifié le lien, voici le résultat (il manque le début, je ne suis pas parvenu à remonter plus haut) :

ifeq ($(PLATFORM),SIGMA)
CFLAGS := -D__KERNEL__ -I$(RT28xx_DIR)/include -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2     -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM

export CFLAGS
endif

ifeq ($(PLATFORM),SIGMA_8622)
CFLAGS := -D__KERNEL__ -I$(CROSS_COMPILE_INCLUDE)/include -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fno-common -pipe -fno-builtin -D__linux__ -DNO_MM -mapcs-32 -march=armv4 -mtune=arm7tdmi -msoft-float -DMODULE -mshort-load-bytes -nostdinc -iwithprefix -DMODULE $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),5VT)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O3 -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mabi=apcs-gnu -mno-thumb-interwork -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm926ej-s --param max-inline-insns-single=40000  -Uarm -Wdeclaration-after-statement -Wno-pointer-sign -DMODULE $(WFLAGS)

export CFLAGS
endif

ifeq ($(PLATFORM),IKANOS_V160)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT28xx_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -march=lx4189 -Wa, -DMODULE $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),IKANOS_V180)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT28xx_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -mips32r2 -Wa, -DMODULE $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),INF_TWINPASS)
CFLAGS := -D__KERNEL__ -DMODULE -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -G 0 -mno-abicalls -fno-pic -march=4kc -mips32 -Wa,--trap -pipe -mlong-calls $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),INF_DANUBE)
    ifneq (,$(findstring 2.4,$(LINUX_SRC)))
    CFLAGS := -I$(RT28xx_DIR)/include $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
    else
    CFLAGS := -I$(RT28xx_DIR)/include $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
    endif
export CFLAGS
endif

ifeq ($(PLATFORM),INF_AR9)
CFLAGS := -I$(RT28xx_DIR)/include $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -fno-pic -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -mlong-calls -march=mips32r2 -mtune=34kc -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
export CFLAGS
endif

ifeq ($(PLATFORM),BRCM_6358)
CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include -nostdinc -iwithprefix include -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -I $(LINUX_SRC)/include/asm/gcc -G 0 -mno-abicalls -fno-pic -pipe  -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-bcm963xx -I$(LINUX_SRC)/include/asm-mips/mach-generic  -Os -fomit-frame-pointer -Wdeclaration-after-statement  -DMODULE -mlong-calls
export CFLAGS
endif

ifeq ($(PLATFORM),INF_AMAZON_SE)
CFLAGS := -D__KERNEL__ -DMODULE=1 -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -DCONFIG_IFX_ALG_QOS -DCONFIG_WAN_VLAN_SUPPORT -fomit-frame-pointer -DIFX_PPPOE_FRAME -G 0 -fno-pic -mno-abicalls -mlong-calls -pipe -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),ST)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -O2 -Wundef -Wstrict-prototypes -Wno-trigraphs -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-aliasing -fno-common -fomit-frame-pointer -ffreestanding -o $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),PC)
    ifneq (,$(findstring 2.4,$(LINUX_SRC)))
    # Linux 2.4
    CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
    export CFLAGS
    else
    # Linux 2.6
    EXTRA_CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include
    endif
endif

ifeq ($(PLATFORM),IXP)
    CFLAGS := -v -D__KERNEL__ -DMODULE -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -mbig-endian -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -Uarm -fno-common -pipe -mapcs-32 -D__LINUX_ARM_ARCH__=5 -mcpu=xscale -mtune=xscale -malignment-traps -msoft-float $(WFLAGS)
        EXTRA_CFLAGS := -v $(WFLAGS) -I$(RT28xx_DIR)/include -mbig-endian
    export CFLAGS       
endif

ifeq ($(PLATFORM),SMDK)
        EXTRA_CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include
endif

ifeq ($(PLATFORM),CAVM_OCTEON)
    EXTRA_CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include \
                    -mabi=64 $(WFLAGS)
export CFLAGS
endif
# Support ATE function
HAS_ATE=n

# Support 28xx QA ATE function
HAS_QA_SUPPORT=n


# Support Wpa_Supplicant
HAS_WPA_SUPPLICANT=n

# Support Native WpaSupplicant for Network Maganger
HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y

#Support Net interface block while Tx-Sw queue full
HAS_BLOCK_NET_IF=n

#Support DFS function
HAS_DFS_SUPPORT=n

#Support Carrier-Sense function
HAS_CS_SUPPORT=n

# Support for Multiple Cards
HAS_MC_SUPPORT=n


#Support for IEEE802.11e DLS
HAS_QOS_DLS_SUPPORT=n

#Support for EXT_CHANNEL
HAS_EXT_BUILD_CHANNEL_LIST=n


#Support for Net-SNMP
HAS_SNMP_SUPPORT=n

#Support features of Single SKU.
HAS_SINGLE_SKU_SUPPORT=n

#Support features of 802.11n
HAS_DOT11_N_SUPPORT=y


HAS_KTHREAD_SUPPORT=n



#Support for Auto channel select enhance
HAS_AUTO_CH_SELECT_ENHANCE=n

#Support statistics count
HAS_STATS_COUNT=y


#Client support WDS function
HAS_CLIENT_WDS_SUPPORT=n

#################################################

CC := $(CROSS_COMPILE)gcc
LD := $(CROSS_COMPILE)ld

WFLAGS := -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT  -DLINUX -Wall -Wstrict-prototypes -Wno-trigraphs



ifeq ($(HAS_KTHREAD_SUPPORT),y)
WFLAGS += -DKTHREAD_SUPPORT
endif


#################################################

# config for STA mode

ifeq ($(RT28xx_MODE),STA)
WFLAGS += -DCONFIG_STA_SUPPORT -DDBG

ifeq ($(HAS_WPA_SUPPLICANT),y)
WFLAGS += -DWPA_SUPPLICANT_SUPPORT
ifeq ($(HAS_NATIVE_WPA_SUPPLICANT_SUPPORT),y)
WFLAGS += -DNATIVE_WPA_SUPPLICANT_SUPPORT
endif
endif

ifeq ($(HAS_ATE),y)
WFLAGS += -DRALINK_ATE
ifeq ($(HAS_QA_SUPPORT),y)
WFLAGS += -DRALINK_28xx_QA
endif
endif


ifeq ($(HAS_SNMP_SUPPORT),y)
WFLAGS += -DSNMP_SUPPORT
endif

ifeq ($(HAS_QOS_DLS_SUPPORT),y)
WFLAGS += -DQOS_DLS_SUPPORT
endif

ifeq ($(HAS_DOT11_N_SUPPORT),y)
WFLAGS += -DDOT11_N_SUPPORT
endif


ifeq ($(HAS_CS_SUPPORT),y)
WFLAGS += -DCARRIER_DETECTION_SUPPORT
endif

ifeq ($(HAS_STATS_COUNT),y)
WFLAGS += -DSTATS_COUNT_SUPPORT
endif


endif
# endif of ifeq ($(RT28xx_MODE),STA)

#################################################

#################################################

#
# Common compiler flag
#





ifeq ($(HAS_EXT_BUILD_CHANNEL_LIST),y)
WFLAGS += -DEXT_BUILD_CHANNEL_LIST
endif

ifeq ($(HAS_CLIENT_WDS_SUPPORT),y)
WFLAGS += -DCLIENT_WDS
endif

#################################################
# ChipSet specific definitions.
#
ifeq ($(CHIPSET),2860)
WFLAGS +=-DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRT2860
endif

#################################################


ifeq ($(PLATFORM),5VT)
#WFLAGS += -DCONFIG_5VT_ENHANCE
endif

ifeq ($(HAS_BLOCK_NET_IF),y)
WFLAGS += -DBLOCK_NET_IF
endif

ifeq ($(HAS_MC_SUPPORT),y)
WFLAGS += -DMULTIPLE_CARD_SUPPORT
endif

ifeq ($(PLATFORM),IXP)
WFLAGS += -DRT_BIG_ENDIAN
endif

ifeq ($(PLATFORM),IKANOS_V160)
WFLAGS += -DRT_BIG_ENDIAN -DIKANOS_VX_1X0
endif

ifeq ($(PLATFORM),IKANOS_V180)
WFLAGS += -DRT_BIG_ENDIAN -DIKANOS_VX_1X0
endif

ifeq ($(PLATFORM),INF_TWINPASS)
WFLAGS += -DRT_BIG_ENDIAN -DINF_TWINPASS
endif

ifeq ($(PLATFORM),INF_DANUBE)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
# Linux 2.4
WFLAGS += -DINF_DANUBE -DRT_BIG_ENDIAN
else
# Linux 2.6
WFLAGS += -DRT_BIG_ENDIAN
endif
endif

ifeq ($(PLATFORM),INF_AR9)
WFLAGS += -DRT_BIG_ENDIAN -DINF_AR9
endif

ifeq ($(PLATFORM),CAVM_OCTEON)
WFLAGS += -DRT_BIG_ENDIAN
endif

ifeq ($(PLATFORM),BRCM_6358)
WFLAGS += -DRT_BIG_ENDIAN
endif

ifeq ($(PLATFORM),INF_AMAZON_SE)
WFLAGS += -DRT_BIG_ENDIAN -DINF_AMAZON_SE
endif

ifeq ($(PLATFORM),RALINK_3052)
WFLAGS += -DINF_AMAZON_SE -DPLATFORM_RALINK_3052
endif

ifeq ($(PLATFORM),ST)
#WFLAGS += -DST
WFLAGS += -DST
endif

#kernel build options for 2.4
# move to Makefile outside LINUX_SRC := /opt/star/kernel/linux-2.4.27-star

ifeq ($(PLATFORM),RALINK_3052)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -finline-limit=100000 -march=mips2 -mabi=32 -Wa,--trap -DLINUX -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM), RALINK_2880)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -finline-limit=100000 -march=mips2 -mabi=32 -Wa,--trap -DLINUX -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),STAR)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -Uarm -fno-common -pipe -mapcs-32 -D__LINUX_ARM_ARCH__=4 -march=armv4  -mshort-load-bytes -msoft-float -Uarm -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)

export CFLAGS
endif

ifeq ($(PLATFORM),SIGMA)
CFLAGS := -D__KERNEL__ -I$(RT28xx_DIR)/include -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2     -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe  -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM

export CFLAGS
endif

ifeq ($(PLATFORM),SIGMA_8622)
CFLAGS := -D__KERNEL__ -I$(CROSS_COMPILE_INCLUDE)/include -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fno-common -pipe -fno-builtin -D__linux__ -DNO_MM -mapcs-32 -march=armv4 -mtune=arm7tdmi -msoft-float -DMODULE -mshort-load-bytes -nostdinc -iwithprefix -DMODULE $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),5VT)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O3 -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mabi=apcs-gnu -mno-thumb-interwork -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm926ej-s --param max-inline-insns-single=40000  -Uarm -Wdeclaration-after-statement -Wno-pointer-sign -DMODULE $(WFLAGS)

export CFLAGS
endif

ifeq ($(PLATFORM),IKANOS_V160)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT28xx_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -march=lx4189 -Wa, -DMODULE $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),IKANOS_V180)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT28xx_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -mips32r2 -Wa, -DMODULE $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),INF_TWINPASS)
CFLAGS := -D__KERNEL__ -DMODULE -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -G 0 -mno-abicalls -fno-pic -march=4kc -mips32 -Wa,--trap -pipe -mlong-calls $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),INF_DANUBE)
    ifneq (,$(findstring 2.4,$(LINUX_SRC)))
    CFLAGS := -I$(RT28xx_DIR)/include $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
    else
    CFLAGS := -I$(RT28xx_DIR)/include $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
    endif
export CFLAGS
endif

ifeq ($(PLATFORM),INF_AR9)
CFLAGS := -I$(RT28xx_DIR)/include $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -fno-pic -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float  -mabi=32 -mlong-calls -march=mips32r2 -mtune=34kc -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
export CFLAGS
endif

ifeq ($(PLATFORM),BRCM_6358)
CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include -nostdinc -iwithprefix include -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -I $(LINUX_SRC)/include/asm/gcc -G 0 -mno-abicalls -fno-pic -pipe  -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-bcm963xx -I$(LINUX_SRC)/include/asm-mips/mach-generic  -Os -fomit-frame-pointer -Wdeclaration-after-statement  -DMODULE -mlong-calls
export CFLAGS
endif

ifeq ($(PLATFORM),INF_AMAZON_SE)
CFLAGS := -D__KERNEL__ -DMODULE=1 -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -DCONFIG_IFX_ALG_QOS -DCONFIG_WAN_VLAN_SUPPORT -fomit-frame-pointer -DIFX_PPPOE_FRAME -G 0 -fno-pic -mno-abicalls -mlong-calls -pipe -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),ST)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -Wall -O2 -Wundef -Wstrict-prototypes -Wno-trigraphs -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-aliasing -fno-common -fomit-frame-pointer -ffreestanding -o $(WFLAGS)
export CFLAGS
endif

ifeq ($(PLATFORM),PC)
    ifneq (,$(findstring 2.4,$(LINUX_SRC)))
    # Linux 2.4
    CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
    export CFLAGS
    else
    # Linux 2.6
    EXTRA_CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include
    endif
endif

ifeq ($(PLATFORM),IXP)
    CFLAGS := -v -D__KERNEL__ -DMODULE -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -mbig-endian -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -Uarm -fno-common -pipe -mapcs-32 -D__LINUX_ARM_ARCH__=5 -mcpu=xscale -mtune=xscale -malignment-traps -msoft-float $(WFLAGS)
        EXTRA_CFLAGS := -v $(WFLAGS) -I$(RT28xx_DIR)/include -mbig-endian
    export CFLAGS       
endif

ifeq ($(PLATFORM),SMDK)
        EXTRA_CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include
endif

ifeq ($(PLATFORM),CAVM_OCTEON)
    EXTRA_CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include \
                    -mabi=64 $(WFLAGS)
export CFLAGS
endif
make -C tools
make[1]: entrant dans le répertoire « /home/saroots/2009_0918_RT2860_Linux_STA_v2.2.0.0/tools »
gcc -g bin2h.c -o bin2h
make[1]: quittant le répertoire « /home/saroots/2009_0918_RT2860_Linux_STA_v2.2.0.0/tools »
/home/saroots/2009_0918_RT2860_Linux_STA_v2.2.0.0/tools/bin2h
cp -f os/linux/Makefile.6 /home/saroots/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/Makefile
make  -C  /lib/modules/2.6.30.5-ep0/build SUBDIRS=/home/saroots/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux modules
make: *** /lib/modules/2.6.30.5-ep0/build: Aucun fichier ou dossier de ce type. Arrêt.
make: *** [LINUX] Erreur 2
make -C /home/saroots/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux -f Makefile.6 install
mkdir: ne peut créer le répertoire `/etc/Wireless': Le fichier existe
make[1]: entrant dans le répertoire « /home/saroots/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux »
rm -rf /etc/Wireless/RT2860STA
mkdir /etc/Wireless/RT2860STA
cp /home/saroots/2009_0918_RT2860_Linux_STA_v2.2.0.0/RT2860STA.dat /etc/Wireless/RT2860STA/.
install -d /lib/modules/2.6.30.5-ep0/kernel/drivers/net/wireless/
install -m 644 -c rt2860sta.ko /lib/modules/2.6.30.5-ep0/kernel/drivers/net/wireless/
install: ne peut évaluer `rt2860sta.ko': Aucun fichier ou dossier de ce type
make[1]: *** [install] Erreur 1
make[1]: quittant le répertoire « /home/saroots/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux »
make: *** [install] Erreur 2
rt2860sta
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/eee-control, it will be ignored in a future release.
* Reconfiguring network interfaces...                                                                                       /etc/network/interfaces:7: duplicate option
ifdown: couldn't read interfaces file "/etc/network/interfaces"
/etc/network/interfaces:7: duplicate option
ifup: couldn't read interfaces file "/etc/network/interfaces"

mais le pire, c'est que maintenant ma connexion ne marche plus !!!
je suis connecté dans wifi radar, mais les mails ni internet ne fonctionne !!!:(

Hors ligne

#32 Le 30/10/2009, à 10:15

patacoincoin

Re : [résolu] pas de wifi avec easy peasy 1.5

résolu en installant karmic koala...tout est reconnu du 1er coup !
c'est parfait !
Merci de ton aide willy78

Dernière modification par patacoincoin (Le 30/10/2009, à 10:16)

Hors ligne

Pages : 1 2