#51 Le 26/04/2012, à 16:15
- armen
Re : Comment accélérer Xubuntu
En réponse à malbo:
Voici le lien:
Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#52 Le 26/04/2012, à 16:39
- armen
Re : Comment accélérer Xubuntu
Réponse à faucon50:
Peux tu vérifier mon fstab avant de l'enregistrer, il y a des mises à la ligne que je ne peux enlever.
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=ceea2f73-e163-4b12-89f6-91e85874351a/ext4 noatime,discard,commit=60,errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=1FCC-7E8F /boot/efi vfat defaults 0 1
# /home was on /dev/sda3 during installation
UUID=91e59f52-88bd-4a36-b6b1-bcf7ef84de7b /home ext4 noatime,discard,commit=60 0 2
# swap was on /dev/sda6 during installation
UUID=e019bd87-daa6-4f6f-9b3c-63c13194677b none swap sw 0 0
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#53 Le 26/04/2012, à 16:49
- malbo
Re : Comment accélérer Xubuntu
Le résultat de ton Boot-Info (ton lien du post #51) ne révèle pas d'anomalie selon moi. C'est bien une installation EFI sur un SSD partitionné en GPT. J'ai compris que c'est ce que tu souhaitais faire et c'est réussi à mon avis.
Dernière modification par malbo (Le 26/04/2012, à 16:50)
Hors ligne
#54 Le 26/04/2012, à 16:59
- F50
Re : Comment accélérer Xubuntu
dans cette ligne:
UUID=ceea2f73-e163-4b12-89f6-91e85874351a/ext4 noatime,discard,commit=60,errors=remount-ro 0 1
Il faut espacer le ext4 du 4351a/, met le curseur entre et tape qqs espaces comme les autres lignes pour que ça ressemble à ceci:
UUID=ceea2f73-e163-4b12-89f6-91e85874351a / ext4 noatime,discard,commit=60,errors=remount-ro 0 1
Le diable est dans ce genre de détails! Pour le reste c'est ok 
#55 Le 26/04/2012, à 17:11
- mr_pouit
Re : Comment accélérer Xubuntu
Les "probablement" et "je crois"...sont super à l'église le dimanche comme au temps où la terre était un plateau portée par une immense tortue et que Galileo à fini sur le bûcher pour avoir dit qu'elle est ronde!
Parce que c'est impossible de savoir ce qui se produit réellement dans la FTL, on ne peut que supposer et constater. J'ai un très vieux SSD à base de jmf602 (le fameux contrôleur pourri), et il faut bien entendu éviter au maximum les écritures parce qu'il a un cache minuscule qui sature très vite et crée des freezes quand il est plein. Mais les SSD plus récents ont de meilleurs contrôleurs: par exemple un intel x25-v sous win7 et un crucial m4 sous debian fonctionnent très bien en configuration de base (pas de déplacement de /var, du swap, déplacer le profil firefox, que sais-je d'autre). Et en plus le wear leveling permet de répartir correctement les écritures sans avoir à se soucier de la durée de vie (le ssd sera obsolète avant d'être mort, à moins décrite 1To par jour). Il y a peu de personnes qui ont essayé de tuer un ssd, et ceux qui ont essayé sont arrivés jusqu'à plus de 600To d'écrits, ce qui encore une fois n'arrivera jamais pour un pc de bureau.
La majorité des astuces qu'on peut lire sur internet pour l'optimisation de ssd ont été écrites pour les générations précédentes... (et les ssd ont toujours mauvaise réputation à cause de ça et de certaines marques, au hasard OCZ 
)
Concrètement, mon SSD avec les mises en oeuvre qui sont préconisées fonctionne sans aucune baisse de rapidité ou autres défaillances, alors entre le "probablement" et je "crois", je préfère la modif de quelques fichiers (gratuit) qui dans le temps s'avèrent efficace, contrairement au reste. Mais si tu prouves le contraire test sérieux à l'appui, je suis preneur.
Pour un débutant ce n'est pas gratuit, c'est chiant à faire. Et rien qu'avec tous les fichiers d'état de dpkg (/var/lib/dpkg), tu peux y gagner avec un ssd comparé à un hdd... Le problème reste le prix au Go, et donc il peut être plus avantageux d'avoir son $HOME sur un hdd (mais c'est une question de prix, pas de durée de vie... hdd ou ssd, il faut toujours faire des backups).
Mais tout ça est hs, on peut continuer ailleurs si tu préfères.
Hors ligne
#56 Le 26/04/2012, à 17:12
- armen
Re : Comment accélérer Xubuntu
Comme cela:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=ceea2f73-e163-4b12-89f6-91e85874351a/ ext4 noatime,discard,commit=60,errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=1FCC-7E8F /boot/efi vfat defaults 0 1
# /home was on /dev/sda3 during installation
UUID=91e59f52-88bd-4a36-b6b1-bcf7ef84de7b /home ext4 noatime,discard,commit=60 0 2
# swap was on /dev/sda6 during installation
UUID=e019bd87-daa6-4f6f-9b3c-63c13194677b none swap sw 0 0
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#57 Le 26/04/2012, à 17:22
- F50
Re : Comment accélérer Xubuntu
@ armen: exactement, maintenant reboot et fais nous savoir si ça a explosé le asus de luxe ou pas, je déconne. 
Reboot...et si c'est pas plus rapide, je me fais none au couvent.
@ mr_pouit: Ouvre un fil, je serai de la partie Pour l'instant armen à besoin d'autre chose qu'une discussion concernant les spécificités techniques du SSD...
#58 Le 26/04/2012, à 17:23
- armen
Re : Comment accélérer Xubuntu
Ne cherches plus, quand j'ai vu la liste de services lancés au démarrage, c'est bubuntesque...
Si tu veux du vraiment rapide en xfce, la solution debian s'impose.
Si tu veux piloter un avion de chasse : debian-openbox ou crunchbang.
Je viens d'installer crunchbang sur un autre ordi, une vraie horreur , j'ai perdu mon temps et un CD. Plus malcommode pour un débutant ya pas mieux.
Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#59 Le 26/04/2012, à 17:28
- armen
Re : Comment accélérer Xubuntu
J'ai rebooté 2 fois, désolé mais c'est pire qu'avant car maintenant je bloque sur un écran bleu XUBUNTU ou il faut taper S pour quitter et voir apparaitre le bureau
Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#60 Le 26/04/2012, à 17:41
- F50
Re : Comment accélérer Xubuntu
C'est quoi ce binz bubuntu et toute sa salade de softs pour rien? As-tu été dans paramètres>bureau> et mis un fond d'écran? Car le bleu Xubuntu est le bureau sans fond d'écran. Poste ton /var/log/Xorg.0.log et ton /home/.xsession-errors (fichier caché) pour voir ce qu'il nous fait cet abrutis.
Edit, quand tu as le petit panneau de déconnexion, as-tu coché "enregistrer la session etc etc.."? si oui, décoche le.
Dernière modification par faucon50 (Le 26/04/2012, à 18:00)
#61 Le 26/04/2012, à 18:00
- armen
Re : Comment accélérer Xubuntu
Non, c'est avant le bureau et j'ai un fond d'écran. j'ai une fenêtre avec une barre Xubuntu (comme à la fermeture) et je reste sur cet écran (qui semble charger quelque chose) qui indique keys dans le bas et me donne le choix d'attendre (dans ce cas cela n'aboutit jamais), de taper S pour quitter mount ou M pour manuel. Je tape s et j'arrive sur mon bureau normal sinon je reste coincé.
Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#62 Le 26/04/2012, à 18:12
- F50
Re : Comment accélérer Xubuntu
Bon, je vois pas très bien le binz car ça fait bien longtemps que je n'utilise plus de DM telle GDM ou Lightdm etc etc... qui sont des usines à emmerdes! Je dois filer à l'instant, mais l'important est que tu peux booter et retrouver ton bureau, je te suggère de remettre ça à demain à moins que qq'1 est la résolution entre temps. Mais t'inquiètes pas, ça va se résoudre, c'est mineur comme emmerde! Entre temps poste les 2 fichiers que je t'ai mentionné...pour voir.
#63 Le 26/04/2012, à 18:14
- armen
Re : Comment accélérer Xubuntu
Ok, bonne soirée et merci.
Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#64 Le 26/04/2012, à 18:19
- F50
Re : Comment accélérer Xubuntu
Y'a pas de quoi, on va le faire marcher ce crétin, t'inquiètes pas
P.S. Regarde un peu sur le net si y'a pas un problème similaire...
#65 Le 26/04/2012, à 18:19
- armen
Re : Comment accélérer Xubuntu
[ 225.036]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 225.036] X Protocol Version 11, Revision 0
[ 225.036] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu
[ 225.036] Current Operating System: Linux ap-System-Product-Name 3.0.0-17-generic #30-Ubuntu SMP Thu Mar 8 20:45:39 UTC 2012 x86_64
[ 225.036] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-17-generic root=UUID=ceea2f73-e163-4b12-89f6-91e85874351a ro quiet splash vt.handoff=7
[ 225.036] Build Date: 19 October 2011 05:21:26AM
[ 225.036] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
[ 225.036] Current version of pixman: 0.22.2
[ 225.036] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 225.036] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 225.036] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 26 17:39:08 2012
[ 225.036] (==) Using config file: "/etc/X11/xorg.conf"
[ 225.036] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 225.036] (==) No Layout section. Using the first Screen section.
[ 225.036] (**) |-->Screen "Default Screen" (0)
[ 225.036] (**) | |-->Monitor "<default monitor>"
[ 225.036] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 225.036] (==) Automatically adding devices
[ 225.036] (==) Automatically enabling devices
[ 225.036] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 225.036] Entry deleted from font path.
[ 225.036] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 225.036] Entry deleted from font path.
[ 225.036] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 225.036] Entry deleted from font path.
[ 225.036] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 225.036] Entry deleted from font path.
[ 225.036] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 225.036] Entry deleted from font path.
[ 225.036] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 225.036] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 225.036] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 225.036] (II) Loader magic: 0x7e0220
[ 225.036] (II) Module ABI versions:
[ 225.036] X.Org ANSI C Emulation: 0.4
[ 225.036] X.Org Video Driver: 10.0
[ 225.036] X.Org XInput driver : 12.3
[ 225.036] X.Org Server Extension : 5.0
[ 225.037] (--) PCI:*(0:1:0:0) 1002:68d8:1043:03c0 rev 0, Mem @ 0xc0000000/268435456, 0xfe620000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 225.037] (II) Open ACPI successful (/var/run/acpid.socket)
[ 225.037] (II) "extmod" will be loaded by default.
[ 225.037] (II) "dbe" will be loaded by default.
[ 225.037] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 225.037] (II) "record" will be loaded by default.
[ 225.037] (II) "dri" will be loaded by default.
[ 225.037] (II) "dri2" will be loaded by default.
[ 225.037] (II) LoadModule: "glx"
[ 225.037] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[ 225.037] (II) Module glx: vendor="FireGL - AMD Technologies Inc."
[ 225.037] compiled for 6.9.0, module version = 1.0.0
[ 225.037] (II) Loading extension GLX
[ 225.037] (II) LoadModule: "extmod"
[ 225.038] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 225.038] (II) Module extmod: vendor="X.Org Foundation"
[ 225.038] compiled for 1.10.4, module version = 1.0.0
[ 225.038] Module class: X.Org Server Extension
[ 225.038] ABI class: X.Org Server Extension, version 5.0
[ 225.038] (II) Loading extension MIT-SCREEN-SAVER
[ 225.038] (II) Loading extension XFree86-VidModeExtension
[ 225.038] (II) Loading extension XFree86-DGA
[ 225.038] (II) Loading extension DPMS
[ 225.038] (II) Loading extension XVideo
[ 225.038] (II) Loading extension XVideo-MotionCompensation
[ 225.038] (II) Loading extension X-Resource
[ 225.038] (II) LoadModule: "dbe"
[ 225.038] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 225.038] (II) Module dbe: vendor="X.Org Foundation"
[ 225.038] compiled for 1.10.4, module version = 1.0.0
[ 225.038] Module class: X.Org Server Extension
[ 225.038] ABI class: X.Org Server Extension, version 5.0
[ 225.038] (II) Loading extension DOUBLE-BUFFER
[ 225.038] (II) LoadModule: "record"
[ 225.038] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 225.038] (II) Module record: vendor="X.Org Foundation"
[ 225.038] compiled for 1.10.4, module version = 1.13.0
[ 225.038] Module class: X.Org Server Extension
[ 225.038] ABI class: X.Org Server Extension, version 5.0
[ 225.038] (II) Loading extension RECORD
[ 225.038] (II) LoadModule: "dri"
[ 225.038] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 225.038] (II) Module dri: vendor="X.Org Foundation"
[ 225.038] compiled for 1.10.4, module version = 1.0.0
[ 225.038] ABI class: X.Org Server Extension, version 5.0
[ 225.038] (II) Loading extension XFree86-DRI
[ 225.038] (II) LoadModule: "dri2"
[ 225.038] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 225.038] (II) Module dri2: vendor="X.Org Foundation"
[ 225.038] compiled for 1.10.4, module version = 1.2.0
[ 225.038] ABI class: X.Org Server Extension, version 5.0
[ 225.038] (II) Loading extension DRI2
[ 225.038] (==) Matched fglrx as autoconfigured driver 0
[ 225.038] (==) Matched ati as autoconfigured driver 1
[ 225.038] (==) Matched vesa as autoconfigured driver 2
[ 225.038] (==) Matched fbdev as autoconfigured driver 3
[ 225.038] (==) Assigned the driver to the xf86ConfigLayout
[ 225.038] (II) LoadModule: "fglrx"
[ 225.038] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 225.046] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 225.046] compiled for 1.4.99.906, module version = 8.88.7
[ 225.046] Module class: X.Org Video Driver
[ 225.046] (II) Loading sub module "fglrxdrm"
[ 225.046] (II) LoadModule: "fglrxdrm"
[ 225.046] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 225.046] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 225.046] compiled for 1.4.99.906, module version = 8.88.7
[ 225.046] (II) LoadModule: "ati"
[ 225.046] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 225.046] (II) Module ati: vendor="X.Org Foundation"
[ 225.046] compiled for 1.10.2.902, module version = 6.14.99
[ 225.046] Module class: X.Org Video Driver
[ 225.046] ABI class: X.Org Video Driver, version 10.0
[ 225.046] (II) LoadModule: "radeon"
[ 225.046] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 225.046] (II) Module radeon: vendor="X.Org Foundation"
[ 225.046] compiled for 1.10.2.902, module version = 6.14.99
[ 225.046] Module class: X.Org Video Driver
[ 225.046] ABI class: X.Org Video Driver, version 10.0
[ 225.046] (II) LoadModule: "vesa"
[ 225.047] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 225.047] (II) Module vesa: vendor="X.Org Foundation"
[ 225.047] compiled for 1.10.2, module version = 2.3.0
[ 225.047] Module class: X.Org Video Driver
[ 225.047] ABI class: X.Org Video Driver, version 10.0
[ 225.047] (II) LoadModule: "fbdev"
[ 225.047] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 225.047] (II) Module fbdev: vendor="X.Org Foundation"
[ 225.047] compiled for 1.10.0, module version = 0.4.2
[ 225.047] ABI class: X.Org Video Driver, version 10.0
[ 225.047] (II) ATI Proprietary Linux Driver Version Identifier:8.88.7
[ 225.047] (II) ATI Proprietary Linux Driver Release Identifier: 8.881
[ 225.047] (II) ATI Proprietary Linux Driver Build Date: Jul 28 2011 17:04:01
[ 225.047] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS
[ 225.048] (II) VESA: driver for VESA chipsets: vesa
[ 225.048] (II) FBDEV: driver for framebuffer: fbdev
[ 225.048] (++) using VT number 7
[ 225.048] (WW) Falling back to old probe method for fglrx
[ 225.051] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 225.051] (--) Assigning device section with no busID to primary device
[ 225.051] (--) Chipset Supported AMD Graphics Processor (0x68D8) found
[ 225.051] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 225.052] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 225.052] (II) AMD Video driver is signed
[ 225.052] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 225.052] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 225.052] (II) fglrx(0): pEnt->device->identifier=0x5971a8
[ 225.052] (WW) Falling back to old probe method for vesa
[ 225.052] (WW) Falling back to old probe method for fbdev
[ 225.052] (II) Loading sub module "fbdevhw"
[ 225.052] (II) LoadModule: "fbdevhw"
[ 225.052] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 225.052] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 225.052] compiled for 1.10.4, module version = 0.0.2
[ 225.052] ABI class: X.Org Video Driver, version 10.0
[ 225.052] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 225.052] (II) Loading sub module "vgahw"
[ 225.052] (II) LoadModule: "vgahw"
[ 225.052] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 225.052] (II) Module vgahw: vendor="X.Org Foundation"
[ 225.052] compiled for 1.10.4, module version = 0.1.0
[ 225.052] ABI class: X.Org Video Driver, version 10.0
[ 225.052] (II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 225.052] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 225.052] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 225.052] (==) fglrx(0): Default visual is TrueColor
[ 225.052] (==) fglrx(0): RGB weight 888
[ 225.052] (II) fglrx(0): Using 8 bits per RGB
[ 225.052] (==) fglrx(0): Buffer Tiling is ON
[ 225.052] (II) Loading sub module "fglrxdrm"
[ 225.052] (II) LoadModule: "fglrxdrm"
[ 225.053] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 225.053] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 225.053] compiled for 1.4.99.906, module version = 8.88.7
[ 225.053] ukiDynamicMajor: found major device number 249
[ 225.053] ukiDynamicMajor: found major device number 249
[ 225.053] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 225.053] ukiOpenDevice: node name is /dev/ati/card0
[ 225.053] ukiOpenDevice: open result is 11, (OK)
[ 225.053] ukiOpenByBusid: ukiOpenMinor returns 11
[ 225.053] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 225.053] (==) fglrx(0): NoAccel = NO
[ 225.053] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 225.053] (--) fglrx(0): Chipset: "ATI Radeon HD 5670" (Chipset = 0x68d8)
[ 225.053] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x03c0)
[ 225.053] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 225.054] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 225.054] (--) fglrx(0): MMIO registers at 0xfe620000
[ 225.054] (--) fglrx(0): I/O port at 0x0000e000
[ 225.054] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 225.054] (II) fglrx(0): AC Adapter is used
[ 225.055] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 225.056] (II) Loading sub module "vbe"
[ 225.056] (II) LoadModule: "vbe"
[ 225.056] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 225.056] (II) Module vbe: vendor="X.Org Foundation"
[ 225.056] compiled for 1.10.4, module version = 1.1.0
[ 225.056] ABI class: X.Org Video Driver, version 10.0
[ 225.056] (II) fglrx(0): VESA BIOS detected
[ 225.056] (II) fglrx(0): VESA VBE Version 3.0
[ 225.056] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 225.056] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 225.056] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 225.056] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 225.056] (II) fglrx(0): VESA VBE OEM Product:
[ 225.056] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 225.081] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 225.081] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 225.081] (II) fglrx(0): PCIE card detected
[ 225.081] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 225.081] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 225.083] (II) fglrx(0): Using adapter: 1:0.0.
[ 225.114] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 225.132] (II) fglrx(0): Interrupt handler installed at IRQ 75.
[ 225.132] (II) fglrx(0): RandR 1.2 support is enabled!
[ 225.132] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 225.132] (==) fglrx(0): Center Mode is disabled
[ 225.132] (II) Loading sub module "fb"
[ 225.132] (II) LoadModule: "fb"
[ 225.132] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 225.132] (II) Module fb: vendor="X.Org Foundation"
[ 225.132] compiled for 1.10.4, module version = 1.0.0
[ 225.132] ABI class: X.Org ANSI C Emulation, version 0.4
[ 225.132] (II) Loading sub module "ddc"
[ 225.132] (II) LoadModule: "ddc"
[ 225.132] (II) Module "ddc" already built-in
[ 225.205] (II) fglrx(0): Finished Initialize PPLIB!
[ 225.205] (II) fglrx(0): Output DFP1 has no monitor section
[ 225.205] (II) fglrx(0): Output DFP2 has no monitor section
[ 225.205] (II) fglrx(0): Output CRT1 has no monitor section
[ 225.205] (II) fglrx(0): Output CRT2 has no monitor section
[ 225.205] (II) Loading sub module "ddc"
[ 225.205] (II) LoadModule: "ddc"
[ 225.205] (II) Module "ddc" already built-in
[ 225.205] (II) fglrx(0): Connected Display0: DFP2
[ 225.205] (II) fglrx(0): Display0 EDID data ---------------------------
[ 225.205] (II) fglrx(0): Manufacturer: IVM Model: 6602 Serial#: 16843009
[ 225.205] (II) fglrx(0): Year: 2011 Week: 7
[ 225.205] (II) fglrx(0): EDID Version: 1.3
[ 225.205] (II) fglrx(0): Digital Display Input
[ 225.205] (II) fglrx(0): DFP 1.x compatible TMDS
[ 225.205] (II) fglrx(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 225.205] (II) fglrx(0): Gamma: 2.20
[ 225.205] (II) fglrx(0): DPMS capabilities: Off
[ 225.205] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 225.205] (II) fglrx(0): First detailed timing is preferred mode
[ 225.205] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.282 greenY: 0.603
[ 225.205] (II) fglrx(0): blueX: 0.143 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 225.205] (II) fglrx(0): Supported established timings:
[ 225.205] (II) fglrx(0): 720x400@70Hz
[ 225.205] (II) fglrx(0): 640x480@60Hz
[ 225.205] (II) fglrx(0): 640x480@67Hz
[ 225.205] (II) fglrx(0): 640x480@72Hz
[ 225.205] (II) fglrx(0): 640x480@75Hz
[ 225.205] (II) fglrx(0): 800x600@56Hz
[ 225.205] (II) fglrx(0): 800x600@60Hz
[ 225.205] (II) fglrx(0): 800x600@72Hz
[ 225.205] (II) fglrx(0): 800x600@75Hz
[ 225.205] (II) fglrx(0): 832x624@75Hz
[ 225.205] (II) fglrx(0): 1024x768@60Hz
[ 225.205] (II) fglrx(0): 1024x768@70Hz
[ 225.205] (II) fglrx(0): 1024x768@75Hz
[ 225.205] (II) fglrx(0): 1280x1024@75Hz
[ 225.205] (II) fglrx(0): 1152x864@75Hz
[ 225.205] (II) fglrx(0): Manufacturer's mask: 0
[ 225.205] (II) fglrx(0): Supported standard timings:
[ 225.205] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 225.205] (II) fglrx(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 225.205] (II) fglrx(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 225.205] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 225.205] (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 225.205] (II) fglrx(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 225.205] (II) fglrx(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 225.205] (II) fglrx(0): #7: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 225.205] (II) fglrx(0): Supported detailed timing:
[ 225.205] (II) fglrx(0): clock: 148.5 MHz Image Size: 598 x 336 mm
[ 225.205] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 225.205] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 225.205] (II) fglrx(0): Serial No: 1105110700697
[ 225.205] (II) fglrx(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 225.205] (II) fglrx(0): Monitor name: PLB2712HDS
[ 225.205] (II) fglrx(0): EDID (in hex):
[ 225.205] (II) fglrx(0): 00ffffffffffff0026cd026601010101
[ 225.205] (II) fglrx(0): 07150103813c22782a3585a656489a24
[ 225.205] (II) fglrx(0): 125054bfef80b300a9409500818f8180
[ 225.205] (II) fglrx(0): 950f714f81c0023a801871382d40582c
[ 225.205] (II) fglrx(0): 450056502100001e000000ff00313130
[ 225.205] (II) fglrx(0): 35313130373030363937000000fd0037
[ 225.205] (II) fglrx(0): 4c1e5111000a202020202020000000fc
[ 225.205] (II) fglrx(0): 00504c42323731324844530a202000b9
[ 225.205] (II) fglrx(0): End of Display0 EDID data --------------------
[ 225.213] (II) fglrx(0): EDID for output DFP1
[ 225.213] (II) fglrx(0): EDID for output DFP2
[ 225.213] (II) fglrx(0): Manufacturer: IVM Model: 6602 Serial#: 16843009
[ 225.213] (II) fglrx(0): Year: 2011 Week: 7
[ 225.213] (II) fglrx(0): EDID Version: 1.3
[ 225.213] (II) fglrx(0): Digital Display Input
[ 225.213] (II) fglrx(0): DFP 1.x compatible TMDS
[ 225.213] (II) fglrx(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 225.213] (II) fglrx(0): Gamma: 2.20
[ 225.213] (II) fglrx(0): DPMS capabilities: Off
[ 225.213] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 225.213] (II) fglrx(0): First detailed timing is preferred mode
[ 225.213] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.282 greenY: 0.603
[ 225.213] (II) fglrx(0): blueX: 0.143 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 225.213] (II) fglrx(0): Supported established timings:
[ 225.213] (II) fglrx(0): 720x400@70Hz
[ 225.213] (II) fglrx(0): 640x480@60Hz
[ 225.213] (II) fglrx(0): 640x480@67Hz
[ 225.213] (II) fglrx(0): 640x480@72Hz
[ 225.213] (II) fglrx(0): 640x480@75Hz
[ 225.213] (II) fglrx(0): 800x600@56Hz
[ 225.213] (II) fglrx(0): 800x600@60Hz
[ 225.213] (II) fglrx(0): 800x600@72Hz
[ 225.213] (II) fglrx(0): 800x600@75Hz
[ 225.213] (II) fglrx(0): 832x624@75Hz
[ 225.213] (II) fglrx(0): 1024x768@60Hz
[ 225.213] (II) fglrx(0): 1024x768@70Hz
[ 225.213] (II) fglrx(0): 1024x768@75Hz
[ 225.213] (II) fglrx(0): 1280x1024@75Hz
[ 225.213] (II) fglrx(0): 1152x864@75Hz
[ 225.213] (II) fglrx(0): Manufacturer's mask: 0
[ 225.213] (II) fglrx(0): Supported standard timings:
[ 225.213] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 225.213] (II) fglrx(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 225.213] (II) fglrx(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 225.213] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 225.213] (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 225.213] (II) fglrx(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 225.213] (II) fglrx(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 225.213] (II) fglrx(0): #7: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 225.213] (II) fglrx(0): Supported detailed timing:
[ 225.213] (II) fglrx(0): clock: 148.5 MHz Image Size: 598 x 336 mm
[ 225.213] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 225.213] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 225.213] (II) fglrx(0): Serial No: 1105110700697
[ 225.213] (II) fglrx(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 225.213] (II) fglrx(0): Monitor name: PLB2712HDS
[ 225.213] (II) fglrx(0): EDID (in hex):
[ 225.213] (II) fglrx(0): 00ffffffffffff0026cd026601010101
[ 225.213] (II) fglrx(0): 07150103813c22782a3585a656489a24
[ 225.213] (II) fglrx(0): 125054bfef80b300a9409500818f8180
[ 225.213] (II) fglrx(0): 950f714f81c0023a801871382d40582c
[ 225.213] (II) fglrx(0): 450056502100001e000000ff00313130
[ 225.213] (II) fglrx(0): 35313130373030363937000000fd0037
[ 225.213] (II) fglrx(0): 4c1e5111000a202020202020000000fc
[ 225.213] (II) fglrx(0): 00504c42323731324844530a202000b9
[ 225.213] (II) fglrx(0): Printing probed modes for output DFP2
[ 225.213] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1400x1050"x60.0 148.50 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1600x900"x60.0 148.50 1600 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1360x1024"x60.0 148.50 1360 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1280x1024"x60.0 148.50 1280 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1440x900"x60.0 148.50 1440 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1280x960"x60.0 148.50 1280 2008 2052 2200 960 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1152x864"x60.0 148.50 1152 2008 2052 2200 864 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1280x768"x60.0 148.50 1280 2008 2052 2200 768 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1280x720"x60.0 148.50 1280 2008 2052 2200 720 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "1024x768"x60.0 148.50 1024 2008 2052 2200 768 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "800x600"x60.0 148.50 800 2008 2052 2200 600 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): Modeline "640x480"x60.0 148.50 640 2008 2052 2200 480 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.213] (II) fglrx(0): EDID for output CRT1
[ 225.213] (II) fglrx(0): EDID for output CRT2
[ 225.213] (II) fglrx(0): Output DFP1 disconnected
[ 225.213] (II) fglrx(0): Output DFP2 connected
[ 225.213] (II) fglrx(0): Output CRT1 disconnected
[ 225.213] (II) fglrx(0): Output CRT2 disconnected
[ 225.213] (II) fglrx(0): Using exact sizes for initial modes
[ 225.213] (II) fglrx(0): Output DFP2 using initial mode 1920x1080
[ 225.213] (II) fglrx(0): DPI set to (96, 96)
[ 225.213] (II) fglrx(0): Adapter ATI Radeon HD 5670 has 2 configurable heads and 1 displays connected.
[ 225.213] (==) fglrx(0): PseudoColor visuals disabled
[ 225.213] (II) Loading sub module "ramdac"
[ 225.213] (II) LoadModule: "ramdac"
[ 225.213] (II) Module "ramdac" already built-in
[ 225.213] (==) fglrx(0): NoDRI = NO
[ 225.213] (==) fglrx(0): Capabilities: 0x00000000
[ 225.213] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 225.213] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 225.213] (==) fglrx(0): UseFastTLS=0
[ 225.213] (==) fglrx(0): BlockSignalsOnLock=1
[ 225.213] (II) fglrx(0): Desktop Vsync is enabled.
[ 225.213] (II) UnloadModule: "radeon"
[ 225.213] (II) Unloading radeon
[ 225.213] (II) UnloadModule: "vesa"
[ 225.213] (II) Unloading vesa
[ 225.213] (II) UnloadModule: "fbdev"
[ 225.213] (II) Unloading fbdev
[ 225.213] (II) UnloadModule: "fbdevhw"
[ 225.213] (II) Unloading fbdevhw
[ 225.213] (--) Depth 24 pixmap format is 32 bpp
[ 225.213] (II) Loading extension ATIFGLRXDRI
[ 225.213] (II) fglrx(0): doing swlDriScreenInit
[ 225.213] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 225.213] ukiDynamicMajor: found major device number 249
[ 225.213] ukiDynamicMajor: found major device number 249
[ 225.213] ukiDynamicMajor: found major device number 249
[ 225.213] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 225.213] ukiOpenDevice: node name is /dev/ati/card0
[ 225.213] ukiOpenDevice: open result is 16, (OK)
[ 225.213] ukiOpenByBusid: ukiOpenMinor returns 16
[ 225.213] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 225.213] (II) fglrx(0): [uki] DRM interface version 1.0
[ 225.213] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 225.213] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 225.213] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f7a865dd000
[ 225.213] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 225.213] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 225.213] (II) fglrx(0): swlDriScreenInit done
[ 225.213] (II) fglrx(0): Kernel Module Version Information:
[ 225.213] (II) fglrx(0): Name: fglrx
[ 225.213] (II) fglrx(0): Version: 8.88.7
[ 225.213] (II) fglrx(0): Date: Jul 28 2011
[ 225.213] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 225.213] (II) fglrx(0): Kernel Module version matches driver.
[ 225.213] (II) fglrx(0): Kernel Module Build Time Information:
[ 225.213] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.0.0-17-generic
[ 225.213] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 225.213] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 225.213] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 225.213] (II) fglrx(0): [uki] register handle = 0x00004000
[ 225.223] (II) fglrx(0): DRI initialization successfull
[ 225.223] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[ 225.223] (==) fglrx(0): Backing store disabled
[ 225.223] (II) Loading extension FGLRXEXTENSION
[ 225.223] (==) fglrx(0): DPMS enabled
[ 225.223] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 225.223] (**) fglrx(0): Textured Video is enabled.
[ 225.223] (II) LoadModule: "glesx"
[ 225.223] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/glesx.so
[ 225.224] (II) Module glesx: vendor="X.Org Foundation"
[ 225.224] compiled for 1.4.99.906, module version = 1.0.0
[ 225.224] (II) Loading extension GLESX
[ 225.224] (II) fglrx(0): GLESX enableFlags = 592
[ 225.224] (II) fglrx(0): GLESX is enabled
[ 225.224] (II) LoadModule: "amdxmm"
[ 225.224] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/amdxmm.so
[ 225.224] (II) Module amdxmm: vendor="X.Org Foundation"
[ 225.224] compiled for 1.4.99.906, module version = 2.0.0
[ 225.244] (II) Loading extension AMDXVOPL
[ 225.244] (II) Loading extension AMDXVBA
[ 225.244] [- XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
[ 225.245] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 225.246] (II) fglrx(0): Enable composite support successfully
[ 225.246] (II) fglrx(0): X context handle = 0x1
[ 225.246] (II) fglrx(0): [DRI] installation complete
[ 225.246] (==) fglrx(0): Silken mouse enabled
[ 225.246] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 225.246] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 225.286] (--) RandR disabled
[ 225.286] (II) Initializing built-in extension Generic Event Extension
[ 225.286] (II) Initializing built-in extension SHAPE
[ 225.286] (II) Initializing built-in extension MIT-SHM
[ 225.286] (II) Initializing built-in extension XInputExtension
[ 225.286] (II) Initializing built-in extension XTEST
[ 225.286] (II) Initializing built-in extension BIG-REQUESTS
[ 225.286] (II) Initializing built-in extension SYNC
[ 225.286] (II) Initializing built-in extension XKEYBOARD
[ 225.286] (II) Initializing built-in extension XC-MISC
[ 225.286] (II) Initializing built-in extension SECURITY
[ 225.286] (II) Initializing built-in extension XINERAMA
[ 225.286] (II) Initializing built-in extension XFIXES
[ 225.286] (II) Initializing built-in extension RENDER
[ 225.286] (II) Initializing built-in extension RANDR
[ 225.286] (II) Initializing built-in extension COMPOSITE
[ 225.286] (II) Initializing built-in extension DAMAGE
[ 225.286] (II) Initializing built-in extension GESTURE
[ 225.292] ukiDynamicMajor: found major device number 249
[ 225.292] ukiDynamicMajor: found major device number 249
[ 225.292] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 225.292] ukiOpenDevice: node name is /dev/ati/card0
[ 225.292] ukiOpenDevice: open result is 18, (OK)
[ 225.292] ukiOpenByBusid: ukiOpenMinor returns 18
[ 225.292] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 225.335] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 225.335] (II) fglrx(0): Enable the clock gating!
[ 225.339] (II) fglrx(0): Desktop Vsync is enabled.
[ 225.339] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 225.343] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 225.347] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 225.347] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 225.347] (II) LoadModule: "evdev"
[ 225.347] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 225.347] (II) Module evdev: vendor="X.Org Foundation"
[ 225.347] compiled for 1.10.2, module version = 2.6.0
[ 225.347] Module class: X.Org XInput Driver
[ 225.347] ABI class: X.Org XInput driver, version 12.3
[ 225.347] (II) Using input driver 'evdev' for 'Power Button'
[ 225.347] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 225.347] (**) Power Button: always reports core events
[ 225.347] (**) Power Button: Device: "/dev/input/event1"
[ 225.347] (--) Power Button: Found keys
[ 225.347] (II) Power Button: Configuring as keyboard
[ 225.347] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 225.347] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 225.347] (**) Option "xkb_rules" "evdev"
[ 225.347] (**) Option "xkb_model" "pc105"
[ 225.347] (**) Option "xkb_layout" "fr"
[ 225.347] (**) Option "xkb_variant" "oss"
[ 225.348] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[ 225.350] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 225.350] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 225.350] (II) Using input driver 'evdev' for 'Power Button'
[ 225.350] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 225.350] (**) Power Button: always reports core events
[ 225.350] (**) Power Button: Device: "/dev/input/event0"
[ 225.350] (--) Power Button: Found keys
[ 225.350] (II) Power Button: Configuring as keyboard
[ 225.350] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 225.350] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 225.350] (**) Option "xkb_rules" "evdev"
[ 225.350] (**) Option "xkb_model" "pc105"
[ 225.350] (**) Option "xkb_layout" "fr"
[ 225.350] (**) Option "xkb_variant" "oss"
[ 225.350] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event4)
[ 225.350] (II) No input driver/identifier specified (ignoring)
[ 225.351] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event5)
[ 225.351] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 225.351] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[ 225.351] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 225.351] (**) Logitech USB Laser Mouse: always reports core events
[ 225.351] (**) Logitech USB Laser Mouse: Device: "/dev/input/event5"
[ 225.351] (--) Logitech USB Laser Mouse: Found 12 mouse buttons
[ 225.351] (--) Logitech USB Laser Mouse: Found scroll wheel(s)
[ 225.351] (--) Logitech USB Laser Mouse: Found relative axes
[ 225.351] (--) Logitech USB Laser Mouse: Found x and y relative axes
[ 225.351] (II) Logitech USB Laser Mouse: Configuring as mouse
[ 225.351] (II) Logitech USB Laser Mouse: Adding scrollwheel support
[ 225.351] (**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 225.351] (**) Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 225.351] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5/event5"
[ 225.351] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE)
[ 225.351] (II) Logitech USB Laser Mouse: initialized for relative axes.
[ 225.351] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 225.351] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 225.351] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 225.351] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 225.351] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[ 225.351] (II) No input driver/identifier specified (ignoring)
[ 225.351] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event3)
[ 225.351] (II) No input driver/identifier specified (ignoring)
[ 225.353] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event6)
[ 225.353] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 225.353] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v6.0'
[ 225.353] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event6"
[ 225.354] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 225.354] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 225.354] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6/event6"
[ 225.354] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD)
[ 225.354] (**) Option "xkb_rules" "evdev"
[ 225.354] (**) Option "xkb_model" "pc105"
[ 225.354] (**) Option "xkb_layout" "fr"
[ 225.354] (**) Option "xkb_variant" "oss"
[ 225.354] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event7)
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev pointer catchall"
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 225.354] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v6.0'
[ 225.354] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event7"
[ 225.354] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found 9 mouse buttons
[ 225.354] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found scroll wheel(s)
[ 225.354] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found relative axes
[ 225.354] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found x and y relative axes
[ 225.354] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute axes
[ 225.354] (II) evdev-grail: failed to open grail, no gesture support
[ 225.354] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 225.354] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as mouse
[ 225.354] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 225.354] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Adding scrollwheel support
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: YAxisMapping: buttons 4 and 5
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 225.354] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input7/event7"
[ 225.354] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD)
[ 225.354] (**) Option "xkb_rules" "evdev"
[ 225.354] (**) Option "xkb_model" "pc105"
[ 225.354] (**) Option "xkb_layout" "fr"
[ 225.354] (**) Option "xkb_variant" "oss"
[ 225.354] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: initialized for relative axes.
[ 225.354] (WW) Microsoft Microsoft® 2.4GHz Transceiver v6.0: ignoring absolute axes.
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) keeping acceleration scheme 1
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration profile 0
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration factor: 2.000
[ 225.354] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration threshold: 4
[ 225.354] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/mouse1)
[ 225.354] (II) No input driver/identifier specified (ignoring)
[ 225.355] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event8)
[ 225.355] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 225.355] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v6.0'
[ 225.355] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 225.355] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 225.355] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event8"
[ 225.355] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found 1 mouse buttons
[ 225.355] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found scroll wheel(s)
[ 225.355] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found relative axes
[ 225.355] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute axes
[ 225.355] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found x and y absolute axes
[ 225.355] (--) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 225.355] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as mouse
[ 225.355] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 225.355] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Adding scrollwheel support
[ 225.355] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: YAxisMapping: buttons 4 and 5
[ 225.355] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 225.355] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/input/input8/event8"
[ 225.355] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD)
[ 225.355] (**) Option "xkb_rules" "evdev"
[ 225.355] (**) Option "xkb_model" "pc105"
[ 225.355] (**) Option "xkb_layout" "fr"
[ 225.355] (**) Option "xkb_variant" "oss"
[ 225.355] (EE) Microsoft Microsoft® 2.4GHz Transceiver v6.0: failed to initialize for relative axes.
[ 225.356] (WW) Touch X valuator does not match pointer X valuator, pointer emulation may be incorrect
[ 225.356] (WW) Touch Y valuator does not match pointer Y valuator, pointer emulation may be incorrect
[ 225.356] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: initialized for absolute axes.
[ 225.356] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) keeping acceleration scheme 1
[ 225.356] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration profile 0
[ 225.356] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration factor: 2.000
[ 225.356] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration threshold: 4
[ 225.356] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/js0)
[ 225.356] (II) No input driver/identifier specified (ignoring)
[ 225.357] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event2)
[ 225.357] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 225.357] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 225.357] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 225.357] (**) Eee PC WMI hotkeys: always reports core events
[ 225.357] (**) Eee PC WMI hotkeys: Device: "/dev/input/event2"
[ 225.357] (--) Eee PC WMI hotkeys: Found keys
[ 225.357] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 225.357] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input2/event2"
[ 225.357] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 225.357] (**) Option "xkb_rules" "evdev"
[ 225.357] (**) Option "xkb_model" "pc105"
[ 225.357] (**) Option "xkb_layout" "fr"
[ 225.357] (**) Option "xkb_variant" "oss"
[ 225.362] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 225.503] (II) fglrx(0): EDID vendor "IVM", prod id 26114
[ 225.503] (II) fglrx(0): Using EDID range info for horizontal sync
[ 225.503] (II) fglrx(0): Using EDID range info for vertical refresh
[ 225.503] (II) fglrx(0): Printing DDC gathered Modelines:
[ 225.503] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.503] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 225.503] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 225.503] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 225.503] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 225.503] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 225.503] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 225.503] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 225.503] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 225.503] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 225.503] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 225.503] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 225.503] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 225.503] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 225.503] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 225.503] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 225.503] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 225.503] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 225.503] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 225.503] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 225.503] (II) fglrx(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 225.503] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 225.519] (II) fglrx(0): EDID vendor "IVM", prod id 26114
[ 225.519] (II) fglrx(0): Using hsync ranges from config file
[ 225.519] (II) fglrx(0): Using vrefresh ranges from config file
[ 225.519] (II) fglrx(0): Printing DDC gathered Modelines:
[ 225.519] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.519] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 225.519] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 225.519] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 225.519] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 225.519] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 225.519] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 225.519] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 225.519] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 225.519] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 225.519] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 225.519] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 225.519] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 225.519] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 225.519] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 225.519] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 225.519] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 225.519] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 225.519] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 225.519] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 225.519] (II) fglrx(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 225.519] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 225.546] (II) fglrx(0): EDID vendor "IVM", prod id 26114
[ 225.546] (II) fglrx(0): Using hsync ranges from config file
[ 225.546] (II) fglrx(0): Using vrefresh ranges from config file
[ 225.546] (II) fglrx(0): Printing DDC gathered Modelines:
[ 225.546] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 225.546] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 225.546] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 225.546] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 225.546] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 225.546] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 225.546] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 225.546] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 225.546] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 225.546] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 225.546] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 225.546] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 225.546] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 225.546] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 225.546] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 225.546] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 225.546] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 225.546] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 225.546] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 225.546] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 225.546] (II) fglrx(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 225.547] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#66 Le 26/04/2012, à 18:23
- armen
Re : Comment accélérer Xubuntu
Running X session wrapper
Loading profile from /etc/profile
Loading profile from /home/ap/.profile
Loading resource: /etc/X11/Xresources/x11-common
Loading X session script /etc/X11/Xsession.d/10fglrx
Loading X session script /etc/X11/Xsession.d/20x11-common_process-args
Loading X session script /etc/X11/Xsession.d/30x11-common_xresources
Loading X session script /etc/X11/Xsession.d/40x11-common_xsessionrc
Loading X session script /etc/X11/Xsession.d/50x11-common_determine-startup
Loading X session script /etc/X11/Xsession.d/52libcanberra-gtk3-module_add-to-gtk-modules
Loading X session script /etc/X11/Xsession.d/52libcanberra-gtk-module_add-to-gtk-modules
Loading X session script /etc/X11/Xsession.d/60x11-common_localhost
Loading X session script /etc/X11/Xsession.d/60x11-common_xdg_path
Loading X session script /etc/X11/Xsession.d/60xdg-user-dirs-update
Loading X session script /etc/X11/Xsession.d/65compiz_profile-on-session
Loading X session script /etc/X11/Xsession.d/70gconfd_path-on-session
Loading X session script /etc/X11/Xsession.d/75dbus_dbus-launch
Loading X session script /etc/X11/Xsession.d/80im-switch
Setting IM through im-switch for locale=fr_FR.
Start IM through /etc/X11/xinit/xinput.d/all_ALL linked to /etc/X11/xinit/xinput.d/default.
Loading X session script /etc/X11/Xsession.d/90consolekit
Loading X session script /etc/X11/Xsession.d/90x11-common_ssh-agent
Loading X session script /etc/X11/Xsession.d/99x11-common_start
/usr/bin/startxfce4: X server already running on display :0
xrdb: "Xft.hinting" on line 13 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 14 overrides entry on line 7
ssh-agent is already running
xfdesktop[1810]: starting up
(polkit-gnome-authentication-agent-1:1814): polkit-gnome-1-WARNING **: Failed to register client: The name org.gnome.SessionManager was not provided by any .service files
(xfce4-settings-helper:1821): xfce4-settings-helper-WARNING **: Failed to get the _NET_NUMBER_OF_DESKTOPS property.
** Message: applet now removed from the notification area
** (nm-applet:1818): DEBUG: old state indicates that this was not a disconnect 0
** (nm-applet:1818): DEBUG: old state indicates that this was not a disconnect 0
** Message: using fallback from indicator to GtkStatusIcon
(xfwm4:1804): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.30.0/./gobject/gvalue.c:184: cannot initialize GValue with type `gint', the value has already been initialized as `gint'
(xfce4-indicator-plugin:1953): GLib-GObject-WARNING **: invalid uninstantiatable type `(null)' in cast to `GtkWidget'
(xfce4-indicator-plugin:1953): Gtk-CRITICAL **: IA__gtk_widget_set_name: assertion `GTK_IS_WIDGET (widget)' failed
(xfce4-indicator-plugin:1953): xfce4-indicator-plugin-DEBUG: Looking at Module: libsoundmenu.so
(xfce4-indicator-plugin:1953): xfce4-indicator-plugin-DEBUG: Loading Module: libsoundmenu.so
** Message: applet now embedded in the notification area
(xfce4-indicator-plugin:1953): libindicator-WARNING **: Unable to load icon from file 'audio-output-none' because: Impossible d'ouvrir le fichier « audio-output-none » : Aucun fichier ou dossier de ce type
(xfce4-indicator-plugin:1953): libindicator-WARNING **: IndicatorObject class does not have an accessible description.
(xfce4-indicator-plugin:1953): xfce4-indicator-plugin-DEBUG: Looking at Module: libmessaging.so
(xfce4-indicator-plugin:1953): xfce4-indicator-plugin-DEBUG: Loading Module: libmessaging.so
(xfce4-indicator-plugin:1953): libindicator-WARNING **: IndicatorObject class does not have an accessible description.
(xfce4-indicator-plugin:1953): xfce4-indicator-plugin-DEBUG: Looking at Module: libapplication.so
(xfce4-indicator-plugin:1953): xfce4-indicator-plugin-DEBUG: Loading Module: libapplication.so
(xfce4-indicator-plugin:1953): libxfce4panel-CRITICAL **: IA__xfce_panel_plugin_add_action_widget: assertion `GTK_IS_WIDGET (widget)' failed
(xfce4-indicator-plugin:1953): libindicator-WARNING **: Unable to load icon from file 'audio-output-none' because: Impossible d'ouvrir le fichier « audio-output-none » : Aucun fichier ou dossier de ce type
** Message: moving back from GtkStatusIcon to indicator
** Message: applet now removed from the notification area
(xfce4-indicator-plugin:1953): Indicator-Application-DEBUG: Connected to Application Indicator Service.
(xfce4-indicator-plugin:1953): Indicator-Application-DEBUG: Request current apps
(xfce4-indicator-plugin:1953): Indicator-Application-DEBUG: Building new application entry: :1.27 with icon: nm-no-connection at position 0
(xfce4-indicator-plugin:1953): Indicator-Messages-DEBUG: new_application_item ("Courriel")
(xfce4-indicator-plugin:1953): Indicator-Messages-DEBUG: new_application_item ("Rédiger un nouveau courriel")
(xfce4-indicator-plugin:1953): Indicator-Messages-DEBUG: new_application_item ("Carnet d'adresses")
(xfce4-indicator-plugin:1953): Indicator-Sound-DEBUG: indicator-sound: new_volume_slider_widget
(xfce4-indicator-plugin:1953): Indicator-Sound-DEBUG: indicator-sound: new_voip_slider_widget
** (nm-applet:1818): DEBUG: old state indicates that this was not a disconnect 20
** (nm-applet:1818): DEBUG: foo_client_state_changed_cb
** (nm-applet:1818): DEBUG: foo_client_state_changed_cb
ReminderFox clh(1) {rmFx_cmdLine: [xpconnect wrapped nsICommandLine]}
(xfce4-indicator-plugin:1953): Indicator-Messages-DEBUG: new_application_item ("(null)")
ReminderFox clh(1) {rmFx_cmdLine: [xpconnect wrapped nsICommandLine]}
(xfce4-indicator-plugin:1953): Indicator-Messages-DEBUG: new_application_item ("(null)")
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
NOTE: child process received `Goodbye', closing down
ReminderFox clh(1) {rmFx_cmdLine: [xpconnect wrapped nsICommandLine]}
(xfce4-indicator-plugin:1953): Indicator-Messages-DEBUG: new_application_item ("(null)")
(Thunar:1808): Gdk-CRITICAL **: IA__gdk_window_get_window_type: assertion `GDK_IS_WINDOW (window)' failed
(Thunar:1808): Gdk-CRITICAL **: IA__gdk_window_get_window_type: assertion `GDK_IS_WINDOW (window)' failedCordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#67 Le 27/04/2012, à 07:59
- F50
Re : Comment accélérer Xubuntu
Salut armen,
Avant de faire quoi que ce soit, je viens de remarquer un DETAILS qui pourrait être la cause du merdier!? Dans ton /etc/fstab il y a cette ligne:
UUID=ceea2f73-e163-4b12-89f6-91e85874351a/ ext4 noatime,discard,commit=60,errors=remount-ro 0 1
Met 2 espaces entre le UUID=ceea2f73-e163-4b12-89f6-91e85874351a et le / résultat:
UUID=ceea2f73-e163-4b12-89f6-91e85874351a / ext4 noatime,discard,commit=60,errors=remount-ro 0 1
Puis tu enregistres et tu reboot et tu fais savoir si c'était la cause de cette attente. Le diable est dans les DETAILS, c'est peut-être la cause de ce BINZ?! *Je viens de remarquer que je te l'avais indiqué au #54*, regarde bien! Si c'est toujours pas bon, tu suis ce qui est indiqué ci-dessous:
1. Tu as installé le pilote graphique fglrx? Poste le résultat de la commande: fglrxinfo
2. Tu as bien lightdm installé et tu tapes ton password pour entrer en session?
3. Qu'est-ce qui est coché dans ton paramètres>session et démarrage>Démarrage automatique?
j'ai une fenêtre avec une barre Xubuntu (comme à la fermeture) et je reste sur cet écran (qui semble charger quelque chose) qui indique keys dans le bas et me donne le choix d'attendre (dans ce cas cela n'aboutit jamais), de taper S pour quitter mount ou M pour manuel. Je tape s et j'arrive sur mon bureau normal sinon je reste coincé.
Il y un "truck" partition qui ne se monte pas automatiquement...Essaye d'éditer ton /etc/fstab et met un # devant cette ligne puis tu enregistres:
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 ce qui donne:
#tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
Après tu édites /etc/default/grub et tu enlèves le mot splash de la ligne ci-dessous:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash
en faisant attention de garder un espace entre quiet et elevator=deadline puis tu enregistres et en terminal tu tapes sudo update=grub et tu reboot. Le fait d'enlever le splash va permettre d'enlever l'image durant le boot pour montrer le texte du boot pour comprendre ce qui le bloque. Quand tu seras au bloquage tu écris les 2-3 lignes avant qu'il dise pressez s pour quitter etc etc...Dans ces lignes l'anomalie sera décrite, du genre: la partition telle ou telle ne peut pas être montée, et on en saura plus!
Dernière modification par faucon50 (Le 27/04/2012, à 09:11)
#68 Le 27/04/2012, à 09:11
- armen
Re : Comment accélérer Xubuntu
Bonjour,
L'erreur était dans le fichier, cela s'ouvre normalement à présent, mais j'ai chrono en main, depuis l'allumage de l'ordinateur (apparition de la fenêtre de Asus) jusqu'à l'ouverture du bureau 21secondes. (je suis en démarrage auto, pas de mot de passe à rentrer)
Dernière modification par armen (Le 27/04/2012, à 09:12)
Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#69 Le 27/04/2012, à 09:22
- F50
Re : Comment accélérer Xubuntu
Et ben voilà, quand je t'ai dis que le diable était dans le DETAILS, tu en as la preuve!!! Concernant le la vitesse du boot, tes 21s ne sont PAS LE BOOT, j'explique, le boot de l'os se voit dans ton /var/log/syslog à la fin dans la ligne:
Apr 26 09:47:46 localhost kernel: [ 6.794972] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Ici la connexion est ok et tu es sur le bureau, la différence c'est le BIOS, et vu que cette crotte sont faite à la louche pour windobe, faut pas s'étonner du temps qu'il prend pour initialiser les hardwares!
Mais bon maintenant si tu veux on va accélérer ce foutra?
#70 Le 27/04/2012, à 09:33
- armen
Re : Comment accélérer Xubuntu
Mais bon maintenant si tu veux on va accélérer ce foutra?
Ouiiii 
et
Ici la connexion est ok et tu es sur le bureau, la différence c'est le BIOS, et vu que cette crotte sont faite à la louche pour Windows
c'est tout à fait juste, particulièrement sur ce bios EFI, d'ailleurs, alors que win7 a disparu il existe toujours une option de boot "boot windows manager" que je ne peux supprimer.
Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#71 Le 27/04/2012, à 09:58
- F50
Re : Comment accélérer Xubuntu
c'est tout à fait juste, particulièrement sur ce bios EFI, d'ailleurs, alors que win7 a disparu il existe toujours une option de boot "boot windows manager" que je ne peux supprimer.
J'ai eu une fois CM ASUS never again! Elle est où cette option: "boot windows manager"? Dans GRUB?
Ouiiii et
Bon va falloir mettre le nez sous capot, hein être précis et rationnel 
Pour commencer, réponds à ces questions et soit précis:
1. As-tu commenté la ligne ci-dessous dans /etc/fstab? Si oui il faut enlever le # car elle ne doit pas l'être:
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
2. Donne le retour de cette commande: fglrxinfo
3. As-tu une imprimante branché sur le port parallèle ou utilises-tu ce port en général?
4. tapes ceci dans un terminal: sudo apt-get clean ça ve nettoyer les paquets des archives des softs installés.
#72 Le 27/04/2012, à 10:16
- The Uploader
Re : Comment accélérer Xubuntu
J'ajouterais un coup de :
sudo apt-get autoremove(ça enlève les paquets installés en tant que dépendances devenus inutiles)
- Oldies PC : Intel Pentium 3 @ 800 Mhz sur CM ASUS P2B-F, GeForce 4 Ti4800 SE, Disque Dur Hitachi 160 Go, 512 Mo de RAM, 3DFX Voodoo 2, Sound Blaster 16 ISA PnP, Windows 98 SE / XP)
- Desktop : Intel Core i7 6700K @ 4 GHz sur CM ASUS Z170-P, GeForce GTX 1070, SSD Samsung 850 EVO 1 To, 16 Go de RAM, Disque Dur Seagate Barracuda 3 To, Windows 10
Hors ligne
#73 Le 27/04/2012, à 10:19
- armen
Re : Comment accélérer Xubuntu
"boot windows manager" je ne sais pas où c'est mais il ne se voit que lorsque l'on rentre dans le bios (en couleur svp) dans le choix de la priorité de démarrage (boot windows manager, ubuntu, lecteur cd/dvd, disque dur untel, disque dur machin...)
1: Il n'y avait pas de # devant tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
2:
ap@ap-System-Product-Name:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 5670
OpenGL version string: 4.1.11005 Compatibility Profile Context3: je n'ai qu'une imprimante USB qui ne fonctionne pas sous Xubuntu, c'est pour cela que j'utilise win7 virtualisé avec VirtualBox, je ne pense pas utiliser ce port, tout est en usb et l'écran hdmi.
4: fait. (il n'y avait rien, je nettoie régulièrement avec synaptic ou j'ai fait des filtres et ubuntu tweak)
Cordialement,
Armen.
_______________________________________________________________________________________________________________________
Config: Carte mère ASUS P8Z77-V, Intel(R) Core(TM) i7-3770K CPU @ 4.0GHz, Carte réseau Intel® 82579V Gigabit Network Connection, Qualcomm Atheros AR9485 Wireless Network Adapter, RAM 16Go 1600MHz DDR3, carte graphique GEFORCE GTX 960
Hors ligne
#74 Le 27/04/2012, à 10:20
- F50
Re : Comment accélérer Xubuntu
Salut The Uploader 
Affirmatif, néanmoins je préfère le faire dans synaptic car je vois ce que j'enlève. Il m'est déjà arrivé d'avoir "paquets pouvant être supprimés mais qui en fait ne devait pas l'être, bon j'accorde que c'était dû à des bidouilles de ma part
#75 Le 27/04/2012, à 10:41
- F50
Re : Comment accélérer Xubuntu
"boot windows manager" je ne sais pas où c'est mais il ne se voit que lorsque l'on rentre dans le bios (en couleur svp) dans le choix de la priorité de démarrage (boot windows manager, ubuntu, lecteur cd/dvd, disque dur untel, disque dur machin...)
Ok, pour l'instant ça bouffe pas de pain, laissons ça de côté.
1: Il n'y avait pas de # devant tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
Parfait.
ap@ap-System-Product-Name:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 5670
OpenGL version string: 4.1.11005 Compatibility Profile Context
Extra, tu as installé fglrx depuis le dépôts officiel ou depuis le site AMD?
je n'ai qu'une imprimante USB qui ne fonctionne pas sous Xubuntu, c'est pour cela que j'utilise win7 virtualisé avec VirtualBox, je ne pense pas utiliser ce port, tout est en usb et l'écran hdmi.
C'est quoi cette imprimante? Bon, on va commencer, tu fais: sudo gedit /etc/modprobe.d/blacklist.conf et dans ce fichier tu rajoute en-bas avec une ligne d'espace avec la dernière ceci:
#Les modules du port parrallèle
blacklist ppdev
blacklist parport
blacklist parport_pc
et si tu n'as pas de joystick tu rajoutes ceci avec à nouveau une ligne d'espace par rapport à la dernière:
#Le module joystick
blacklist joydev
tu enregistres le fichier et dans un terminal tu tapes: sudo update-initramfs -u et tu laisses régénérer l'image et tu fermes le terminal. Ensuite tu fais: sudo gedit /etc/modules et tu mets un # devans lp et tu enregistres le fichier.
Après tu fais: sudo gedit /etc/init/cups.conf et tu vas changer le premier paragraphe en-haut en lui rajoutant runlevel [3] devant filesystem pour que ce soit exactement ainsi:
start on (runlevel [3] filesystem
and (started dbus or runlevel [2345])
and stopped udevtrigger)
stop on runlevel [016]
Attention aux espace! Ceci va éviter de charger cups au boot mais que tu pourras lancer en session par: sudo service cups start et sudo service cups stop pour l'arrêter que ça te chantes. Vas y déjà avec ça, après on continue...