Boot d'Ubuntu anormalement long

Wusha · Le 30/01/2018, à 16:55

@?? Ok j'essaierai. Par contre du coup comment je fais? Je tape /boot/grub/grub.cfg dans le terminal et c'est tout? Il me sort des lignes et je peux modifier ces lignes? (Désolée je suis vraiment novice)

?? · Le 30/01/2018, à 17:40

moko138 a écrit :

??;
Quand tu écris
noioapic nolapic 
n'y aurait-il pas une faute de frappe ? C'est la première fois que je lis "noiapic", avec un i comme Indépendance.

Bonjour Moko138.
Je crois qu'aujourd'hui, tu n'as qu'un oeil, autrement tu aurais lu IO. je ne te dis pas de quoi c'est l'abréviation et l'autre c'est un petit L (local)
Le problème de ce genre de choses, c'est que je ne sais pas trop quel est le bon paramètre ou s'il en faut plusieurs

Dernière modification par ?? (Le 30/01/2018, à 17:59)

?? · Le 30/01/2018, à 18:03

Il te faut un éditeur de fichier. Cela dépend de ton OS

sudo gedit /boot/grub/grub.cfg
sudo nano /boot/grub/grub.cfg
sudo leafpad /boot/grub/grub.cfg
sudo vi /boot/grub/grub.cfg

Il y en a certainement d'autres......Lorsque c'est modifié penses à enregistrer avant de quitter.

Dernière modification par ?? (Le 30/01/2018, à 18:04)

Wusha · Le 30/01/2018, à 23:15

Alors après plusieurs redémarrages, voilà déjà mes chronomètres. J'ai fait 3 redémarrages successifs sans toucher a rien de façon a avoir une base
Temps pour accéder au GRUB: une vingtaine de secondes dans les trois cas
Temps pour accéder a la page d'identification: 11 min 23 min 16 min
Temps pour accéder au bureau: environ 1 minute dans les 3 cas

Il me fait aussi un autre truc étrange, mon écran se met en veille comme si l'ordi était éteint ou en veille, juste après avoir séléctionné ubuntu dans le grub. Mais l'ordi tourne a plein régime, je l'entends. Dans le premier et le troisième redémarrage, j'ai appuyé sur une touche (ver. num. pour que ça n'influe sur rien). Dans le cas du deuxième (23 min), j'ai attendu que ça se remette tout seul. Mais la page d'ubuntu ne se met pas directement après le "rallumage" de l'écran, il reste encore noir pendant un moment après ça.

Je tente les commandes de ?? et je vous dit ce qui se passe

J'avoue que si après ça je n'ai pas de réponse, je me tâte a tout refaire. Formater mon disque, réinstaller Windows puis réinstaller Linux (d'autant qu'on m'a dit qu'il pouvait parfois y avoir des problèmes lorsqu'on redimensionnait la partition Windows alors qu'elle n'était pas vide. C'est peut-être simplement Windows qui n'a pas aimé mon partitionnement)

Par contre j'ai ouvert le menu BiOS je n'ai pas trouvé où on voyait la version

EDIT: Après la tentative de la première commande, il ne démarre plus. Il se lance, "éteint" l'écran comme dit plus haut, tout en tournant à plein régime, mais ça s'arrête là. J'ai attendu plus d'une heure hier soir, j'ai fini par laisser tourner en me disant que tant pis pour le chronométrage, au moins il serait allumé ce matin, et ce n'est pas le cas

Dernière modification par Wusha (Le 31/01/2018, à 09:53)

?? · Le 31/01/2018, à 14:19

Bonjour
Lorsque tu as l'écran d'accueil, prends la seconde ligne (mode avancé)
Puis une ligne contenant le mot recovery
Tu devrais booter. Tu diras, le temps que cela prend et tu pourras de nouveau remodifier la ligne pour mettre l'une des autres options.

Le but de ces options étant d'améliorer le temps de démarrage, si au bout de 15 minutes, ce n'est pas opérationnel, il est inutile d'attendre plus longtemps.
Tu donneras aussi le retour de la commande

tail -500 /var/log/syslog

Ce qui permettra certainement de traiter le problème du temps de boot supérieur à 5 minutes que le dmesg n'a pas identifié car ce n'est plus un problème de démarrage de l'ordinateur mais un problème de démarrage de la session de l'utilisateur...

Tu joindras aussi un rapport smartctl paragraphes 1 et 3.1 de https://doc.ubuntu-fr.org/smartmontools

Pour l'instant, il est inutile de toucher à windows qui n'y est pour rien ni de réinstaller ubuntu, car sans diagnostic, tu aboutiras au même résultat.

Dernière modification par ?? (Le 31/01/2018, à 14:35)

moko138 · Le 31/01/2018, à 15:18

?? a écrit :

moko138 a écrit :
??;
Quand tu écris
noioapic nolapic 
n'y aurait-il pas une faute de frappe ? C'est la première fois que je lis "noiapic", avec un i comme Indépendance.
Je crois qu'aujourd'hui, tu n'as qu'un oeil, autrement tu aurais lu IO.

Je retiens la formule «Je crois qu'aujourd'hui, tu n'as qu'un oeil» !
- -
Alors, vérification faite dans
ht tps://www.mjmwired.net/kernel/Documentation/kernel-parameters.txt
je trouve bien :

3002			noioapicquirk	[APIC] Disable all boot interrupt quirks.
3003					Safety option to keep boot IRQs enabled. This
3004					should never be necessary.
(...)
3009			noioapicreroute	[APIC] Disable workaround that uses the
3010					boot IRQ equivalent of an IRQ that connects to
3011					a chipset where boot IRQs cannot be disabled.
3012					The opposite of ioapicreroute.

mais je ne trouve pas de "noioapic" tout court.

xubu1957 · Le 31/01/2018, à 15:30

Bonjour,

Autre info :

traduction a écrit :

noapic Disable the "Advanced Programmable Interrupt Controller (APIC)".
nolapic Disable the "local APIC".

Il y a deux composants dans le système Intel APIC, l'APIC local (LAPIC) et l'APIC I/O. Ce dernier achemine les interruptions qu'il reçoit des bus périphériques vers un ou plusieurs APIC locaux qui se trouvent dans le processeur. Il est vraiment utile pour les systèmes multiprocesseurs. Certains ordinateurs ont des problèmes avec le système APIC, ce qui peut provoquer des blocages ou une détection incorrecte du périphérique (message d'erreur " Spurious 8259A interrupt : IRQ7 "). Dans ce cas, désactivez APIC et/ou APIC local.

> /wiki.mageia.org/en/How_to_set_up_kernel_options

Wusha · Le 01/02/2018, à 02:13

Alors j'ai essayé les 3 commandes sur le /boot/grub/grub.cfg, a chaque fois je suis obligée de booter en mode sans échec. J'ai remis comme c'était, pour pouvoir au moins booter normalement.

Voici le rapport de tail -500 /var/log/syslog

tail -500 /var/log/syslog
Jan 31 21:52:44 ana-comp kernel: [  602.935743] [drm] size 8294400
Jan 31 21:52:44 ana-comp kernel: [  602.935743] [drm] fb depth is 24
Jan 31 21:52:44 ana-comp kernel: [  602.935743] [drm]    pitch is 7680
Jan 31 21:52:44 ana-comp kernel: [  602.935814] fbcon: radeondrmfb (fb0) is primary device
Jan 31 21:52:44 ana-comp kernel: [  602.935888] Console: switching to colour frame buffer device 240x67
Jan 31 21:52:44 ana-comp kernel: [  602.935918] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
Jan 31 21:52:44 ana-comp kernel: [  602.972873] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
Jan 31 21:52:44 ana-comp kernel: [  603.027187] usb 6-1: New USB device found, idVendor=1532, idProduct=010b
Jan 31 21:52:44 ana-comp kernel: [  603.027189] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 31 21:52:44 ana-comp kernel: [  603.027190] usb 6-1: Product: Razer Arctosa
Jan 31 21:52:44 ana-comp kernel: [  603.027191] usb 6-1: Manufacturer: Razer
Jan 31 21:52:44 ana-comp kernel: [  603.035421] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/0003:1532:010B.0002/input/input4
Jan 31 21:52:44 ana-comp kernel: [  603.092737] hid-generic 0003:1532:010B.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Razer Arctosa] on usb-0000:00:13.1-1/input0
Jan 31 21:52:44 ana-comp kernel: [  603.098423] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/0003:1532:010B.0003/input/input5
Jan 31 21:52:44 ana-comp kernel: [  603.156721] hid-generic 0003:1532:010B.0003: input,hidraw2: USB HID v1.10 Device [Razer Razer Arctosa] on usb-0000:00:13.1-1/input1
Jan 31 21:52:44 ana-comp kernel: [  903.162717] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large:
Jan 31 21:52:44 ana-comp kernel: [  903.162718] clocksource:                       'hpet' wd_now: 2ec568d wd_last: 27c60e7 mask: ffffffff
Jan 31 21:52:44 ana-comp kernel: [  903.162719] clocksource:                       'tsc' cs_now: 28b0d36a7c8 cs_last: 1b7c43a77f6 mask: ffffffffffffffff
Jan 31 21:52:44 ana-comp kernel: [  903.162721] tsc: Marking TSC unstable due to clocksource watchdog
Jan 31 21:52:44 ana-comp kernel: [  903.162730] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
Jan 31 21:52:44 ana-comp kernel: [  903.162731] sched_clock: Marking unstable (3264496226, 0)<-(903302370375, -139640683)
Jan 31 21:52:44 ana-comp kernel: [    5.088514] floppy0: no floppy controllers found
Jan 31 21:52:44 ana-comp kernel: [    5.362977] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Jan 31 21:52:44 ana-comp kernel: [    6.846320] random: crng init done
Jan 31 21:52:44 ana-comp kernel: [    7.671256] lp: driver loaded but no devices found
Jan 31 21:52:44 ana-comp kernel: [    7.882202] ppdev: user-space parallel port driver
Jan 31 21:52:44 ana-comp kernel: [   10.465767] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
Jan 31 21:52:44 ana-comp kernel: [   10.552916] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 31 21:52:44 ana-comp kernel: [   10.596014] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170531/utaddress-247)
Jan 31 21:52:44 ana-comp kernel: [   10.596021] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jan 31 21:52:44 ana-comp kernel: [   10.596501] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
Jan 31 21:52:44 ana-comp kernel: [   10.639910] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
Jan 31 21:52:44 ana-comp kernel: [   10.639913] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Jan 31 21:52:44 ana-comp kernel: [   10.639914] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Jan 31 21:52:44 ana-comp kernel: [   10.639915] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
Jan 31 21:52:44 ana-comp kernel: [   10.639916] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
Jan 31 21:52:44 ana-comp kernel: [   10.639917] snd_hda_codec_realtek hdaudioC0D0:    inputs:
Jan 31 21:52:44 ana-comp kernel: [   10.639918] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
Jan 31 21:52:44 ana-comp kernel: [   10.639919] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
Jan 31 21:52:44 ana-comp kernel: [   10.639921] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
Jan 31 21:52:44 ana-comp kernel: [   10.639921] snd_hda_codec_realtek hdaudioC0D0:    dig-in=0x1f
Jan 31 21:52:44 ana-comp kernel: [   10.655666] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
Jan 31 21:52:44 ana-comp kernel: [   10.662920] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
Jan 31 21:52:44 ana-comp kernel: [   10.662972] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
Jan 31 21:52:44 ana-comp kernel: [   10.663031] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
Jan 31 21:52:44 ana-comp kernel: [   10.663080] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
Jan 31 21:52:44 ana-comp kernel: [   10.663130] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
Jan 31 21:52:44 ana-comp kernel: [   10.663182] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
Jan 31 21:52:44 ana-comp kernel: [   10.663239] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
Jan 31 21:52:44 ana-comp kernel: [   10.663289] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
Jan 31 21:52:44 ana-comp kernel: [   10.680877] kvm: Nested Virtualization enabled
Jan 31 21:52:44 ana-comp kernel: [   10.680880] kvm: Nested Paging enabled
Jan 31 21:52:44 ana-comp kernel: [   10.682505] MCE: In-kernel MCE decoding enabled.
Jan 31 21:52:44 ana-comp kernel: [   10.683991] EDAC amd64: Node 0: DRAM ECC disabled.
Jan 31 21:52:44 ana-comp kernel: [   10.683992] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Jan 31 21:52:44 ana-comp kernel: [   10.683992]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
Jan 31 21:52:44 ana-comp kernel: [   10.683992]  (Note that use of the override may cause unknown side effects.)
Jan 31 21:52:44 ana-comp kernel: [   10.728795] EDAC amd64: Node 0: DRAM ECC disabled.
Jan 31 21:52:44 ana-comp kernel: [   10.728796] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Jan 31 21:52:44 ana-comp kernel: [   10.728796]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
Jan 31 21:52:44 ana-comp kernel: [   10.728796]  (Note that use of the override may cause unknown side effects.)
Jan 31 21:52:44 ana-comp kernel: [   10.784823] EDAC amd64: Node 0: DRAM ECC disabled.
Jan 31 21:52:44 ana-comp kernel: [   10.784825] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Jan 31 21:52:44 ana-comp kernel: [   10.784825]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
Jan 31 21:52:44 ana-comp kernel: [   10.784825]  (Note that use of the override may cause unknown side effects.)
Jan 31 21:52:44 ana-comp kernel: [   12.292862] Adding 1952764k swap on /dev/sda4.  Priority:-1 extents:1 across:1952764k FS
Jan 31 21:52:44 ana-comp kernel: [   12.459511] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Jan 31 21:52:44 ana-comp kernel: [   12.866570] audit: type=1400 audit(1517431957.433:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=678 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   12.866574] audit: type=1400 audit(1517431957.433:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   12.866576] audit: type=1400 audit(1517431957.433:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=678 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   12.866578] audit: type=1400 audit(1517431957.433:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   12.868015] audit: type=1400 audit(1517431957.435:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=682 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   12.868019] audit: type=1400 audit(1517431957.435:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=682 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   12.869283] audit: type=1400 audit(1517431957.436:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=683 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   12.871834] audit: type=1400 audit(1517431957.438:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=684 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   12.871838] audit: type=1400 audit(1517431957.438:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=684 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   12.871840] audit: type=1400 audit(1517431957.438:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=684 comm="apparmor_parser"
Jan 31 21:52:44 ana-comp kernel: [   13.792534] floppy0: no floppy controllers found
Jan 31 21:52:45 ana-comp acpid: 9 rules loaded
Jan 31 21:52:45 ana-comp acpid: waiting for events: event logging is off
Jan 31 21:52:45 ana-comp NetworkManager[752]: <info>  [1517431965.4348] NetworkManager (version 1.2.6) is starting...
Jan 31 21:52:45 ana-comp NetworkManager[752]: <info>  [1517431965.4650] Read config: /etc/NetworkManager/NetworkManager.conf (etc: default-wifi-powersave-on.conf)
Jan 31 21:52:45 ana-comp NetworkManager[752]: <info>  [1517431965.5054] manager[0xf91200]: monitoring kernel firmware directory '/lib/firmware'.
Jan 31 21:52:45 ana-comp NetworkManager[752]: <info>  [1517431965.5054] monitoring ifupdown state file '/run/network/ifstate'.
Jan 31 21:52:45 ana-comp NetworkManager[752]: <info>  [1517431965.5574] dns-mgr[0xf89950]: init: dns=dnsmasq, rc-manager=resolvconf, plugin=dnsmasq
Jan 31 21:52:45 ana-comp polkitd[810]: started daemon version 0.105 using authority implementation `local' version `0.105'
Jan 31 21:52:45 ana-comp dbus[716]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jan 31 21:52:45 ana-comp systemd[1]: Started Authenticate and Authorize Users to Run Privileged Tasks.
Jan 31 21:52:45 ana-comp systemd[1]: Started Network Manager.
Jan 31 21:52:45 ana-comp systemd[1]: Starting Network Manager Wait Online...
Jan 31 21:52:45 ana-comp accounts-daemon[758]: started daemon version 0.6.40
Jan 31 21:52:45 ana-comp systemd[1]: Started Accounts Service.
Jan 31 21:52:45 ana-comp dbus[716]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Jan 31 21:52:45 ana-comp systemd[1]: Starting Network Manager Script Dispatcher Service...
Jan 31 21:52:45 ana-comp dbus[716]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 31 21:52:45 ana-comp systemd[1]: Started Network Manager Script Dispatcher Service.
Jan 31 21:52:46 ana-comp systemd[1]: Started Modem Manager.
Jan 31 21:52:46 ana-comp systemd[1]: Received SIGRTMIN+20 from PID 411 (plymouthd).
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.0962] init!
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.0964] management mode: unmanaged
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.0967] devices added (path: /sys/devices/pci0000:00/0000:00:0a.0/0000:03:00.0/net/enp3s0, iface: enp3s0)
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.0967] device added (path: /sys/devices/pci0000:00/0000:00:0a.0/0000:03:00.0/net/enp3s0, iface: enp3s0): no ifupdown configuration found.
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.0967] devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.0968] device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.0968] end _init.
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.0968] settings: loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list. (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-settings-plugin-ifupdown.so)
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.0968] settings: loaded plugin keyfile: (c) 2007 - 2015 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Jan 31 21:52:46 ana-comp apport[764]:  * Starting automatic crash report generation: apport
Jan 31 21:52:46 ana-comp systemd[1]: Started Raise network interfaces.
Jan 31 21:52:46 ana-comp systemd[1]: Reached target Network.
Jan 31 21:52:46 ana-comp systemd[1]: Started Unattended Upgrades Shutdown.
Jan 31 21:52:46 ana-comp gpu-manager[759]: update-alternatives: erreur: pas d'alternatives pour x86_64-linux-gnu_gfxcore_conf
Jan 31 21:52:46 ana-comp speech-dispatcher[757]:  * speech-dispatcher disabled; edit /etc/default/speech-dispatcher
Jan 31 21:52:46 ana-comp systemd[1]: Started LSB: Speech Dispatcher.
Jan 31 21:52:46 ana-comp systemd[1]: Started Detect the available GPUs and deal with any system changes.
Jan 31 21:52:46 ana-comp systemd[1]: Starting Light Display Manager...
Jan 31 21:52:46 ana-comp irqbalance[708]:  * Starting SMP IRQ Balancer: irqbalance
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.2457] SettingsPlugin-Ofono: init!
Jan 31 21:52:46 ana-comp NetworkManager[752]: <warn>  [1517431966.2458] SettingsPlugin-Ofono: file doesn't exist: /var/lib/ofono
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.2458] SettingsPlugin-Ofono: end _init.
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.2458] settings: loaded plugin ofono: (C) 2013-2016 Canonical Ltd.  To report bugs please use the NetworkManager mailing list. (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-settings-plugin-ofono.so)
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.2459] (16442272) ... get_connections.
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.2459] (16442272) ... get_connections (managed=false): return empty list.
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.2580] SettingsPlugin-Ofono: (16442496) ... get_connections.
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.2580] SettingsPlugin-Ofono: (16442496) connections count: 0
Jan 31 21:52:46 ana-comp NetworkManager[752]: <info>  [1517431966.2581] get unmanaged devices count: 0
Jan 31 21:52:46 ana-comp dbus[716]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Jan 31 21:52:46 ana-comp irqbalance[708]:    ...done.
Jan 31 21:52:46 ana-comp systemd[1]: Starting Hostname Service...
Jan 31 21:52:46 ana-comp systemd[1]: Started LSB: daemon to balance interrupts for SMP systems.
Jan 31 21:52:46 ana-comp systemd[1]: Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
Jan 31 21:52:46 ana-comp apport[764]:    ...done.
Jan 31 21:52:46 ana-comp systemd[1]: Started LSB: automatic crash report generation.
Jan 31 21:52:47 ana-comp dbus[716]: [system] Successfully activated service 'org.freedesktop.hostname1'
Jan 31 21:52:47 ana-comp systemd[1]: Started Hostname Service.
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4326] settings: hostname: using hostnamed
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4327] settings: hostname changed from (none) to "ana-comp"
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4329] Using DHCP client 'dhclient'
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4329] manager: WiFi enabled by radio killswitch; enabled by state file
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4329] manager: WWAN enabled by radio killswitch; enabled by state file
Jan 31 21:52:47 ana-comp nm-dispatcher: req:1 'hostname': new request (1 scripts)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4330] manager: Networking is enabled by state file
Jan 31 21:52:47 ana-comp nm-dispatcher: req:1 'hostname': start running ordered scripts...
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4330] Loaded device plugin: NMVxlanFactory (internal)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4330] Loaded device plugin: NMVlanFactory (internal)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4331] Loaded device plugin: NMVethFactory (internal)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4331] Loaded device plugin: NMTunFactory (internal)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4331] Loaded device plugin: NMMacvlanFactory (internal)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4331] Loaded device plugin: NMIPTunnelFactory (internal)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4331] Loaded device plugin: NMInfinibandFactory (internal)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4332] Loaded device plugin: NMEthernetFactory (internal)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4332] Loaded device plugin: NMBridgeFactory (internal)
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.4332] Loaded device plugin: NMBondFactory (internal)
Jan 31 21:52:47 ana-comp systemd[1]: Started LSB: Record successful boot for GRUB.
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.6001] Loaded device plugin: NMAtmManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-adsl.so)
Jan 31 21:52:47 ana-comp systemd[1]: Received SIGRTMIN+21 from PID 411 (plymouthd).
Jan 31 21:52:47 ana-comp NetworkManager[752]: <info>  [1517431967.6691] Loaded device plugin: NMWwanFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wwan.so)
Jan 31 21:52:47 ana-comp systemd[1]: Started Light Display Manager.
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.0324] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so)
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.1622] Loaded device plugin: NMWifiFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wifi.so)
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.2279] manager: (enp3s0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/0)
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.2289] keyfile: add connection in-memory (d17e7c01-0917-3062-b67d-e50cd38685a9,"Connexion filaire 1")
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.2546] settings: (enp3s0): created default wired connection 'Connexion filaire 1'
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.2556] device (enp3s0): state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 21:52:48 ana-comp kernel: [   23.688789] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Jan 31 21:52:48 ana-comp NetworkManager[752]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.2696] device (lo): link connected
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.2702] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1)
Jan 31 21:52:48 ana-comp kernel: [   23.701780] r8169 0000:03:00.0 enp3s0: link down
Jan 31 21:52:48 ana-comp kernel: [   23.701783] r8169 0000:03:00.0 enp3s0: link down
Jan 31 21:52:48 ana-comp kernel: [   23.701816] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.3873] urfkill disappeared from the bus
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.3886] ofono is now available
Jan 31 21:52:48 ana-comp NetworkManager[752]: <warn>  [1517431968.3890] failed to enumerate oFono devices: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
Jan 31 21:52:48 ana-comp NetworkManager[752]: <info>  [1517431968.3895] ModemManager available in the bus
Jan 31 21:52:48 ana-comp ModemManager[715]: <info>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:0a.0/0000:03:00.0': not supported by any plugin
Jan 31 21:52:50 ana-comp NetworkManager[752]: <info>  [1517431970.8404] device (enp3s0): link connected
Jan 31 21:52:50 ana-comp NetworkManager[752]: <info>  [1517431970.8415] device (enp3s0): state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Jan 31 21:52:50 ana-comp kernel: [   26.273169] r8169 0000:03:00.0 enp3s0: link up
Jan 31 21:52:50 ana-comp kernel: [   26.273177] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
Jan 31 21:52:50 ana-comp NetworkManager[752]: <info>  [1517431970.8421] policy: auto-activating connection 'Connexion filaire 1'
Jan 31 21:52:50 ana-comp NetworkManager[752]: <info>  [1517431970.8430] device (enp3s0): Activation: starting connection 'Connexion filaire 1' (d17e7c01-0917-3062-b67d-e50cd38685a9)
Jan 31 21:52:50 ana-comp NetworkManager[752]: <info>  [1517431970.8432] device (enp3s0): state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 21:52:50 ana-comp NetworkManager[752]: <info>  [1517431970.8434] manager: NetworkManager state is now CONNECTING
Jan 31 21:52:50 ana-comp NetworkManager[752]: <info>  [1517431970.8440] device (enp3s0): state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 21:52:50 ana-comp NetworkManager[752]: <info>  [1517431970.8443] device (enp3s0): state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 21:52:50 ana-comp NetworkManager[752]: <info>  [1517431970.8639] dhcp4 (enp3s0): activation: beginning transaction (timeout in 45 seconds)
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.2247] dhcp4 (enp3s0): dhclient started with pid 923
Jan 31 21:52:51 ana-comp dhclient[923]: DHCPREQUEST of 192.168.1.14 on enp3s0 to 255.255.255.255 port 67 (xid=0x42f2d5c9)
Jan 31 21:52:51 ana-comp dhclient[923]: DHCPACK of 192.168.1.14 from 192.168.1.254
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5475]   address 192.168.1.14
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5475]   plen 24 (255.255.255.0)
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5475]   gateway 192.168.1.254
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5475]   server identifier 192.168.1.254
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5475]   lease time 43200
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5476]   nameserver '192.168.1.254'
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5476] dhcp4 (enp3s0): state changed unknown -> bound
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5483] device (enp3s0): state change: ip-config -> ip-check (reason 'none') [70 80 0]
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5489] device (enp3s0): state change: ip-check -> secondaries (reason 'none') [80 90 0]
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5493] device (enp3s0): state change: secondaries -> activated (reason 'none') [90 100 0]
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.5494] manager: NetworkManager state is now CONNECTED_LOCAL
Jan 31 21:52:51 ana-comp avahi-daemon[754]: Joining mDNS multicast group on interface enp3s0.IPv4 with address 192.168.1.14.
Jan 31 21:52:51 ana-comp avahi-daemon[754]: New relevant interface enp3s0.IPv4 for mDNS.
Jan 31 21:52:51 ana-comp avahi-daemon[754]: Registering new address record for 192.168.1.14 on enp3s0.IPv4.
Jan 31 21:52:51 ana-comp dhclient[923]: bound to 192.168.1.14 -- renewal in 17656 seconds.
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.6493] manager: NetworkManager state is now CONNECTED_GLOBAL
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.6494] policy: set 'Connexion filaire 1' (enp3s0) as default for IPv4 routing and DNS
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.6495] dns-plugin[0xfa30e0]: starting dnsmasq...
Jan 31 21:52:51 ana-comp NetworkManager[752]: <info>  [1517431971.7403] dns-mgr: Writing DNS information to /sbin/resolvconf
Jan 31 21:52:51 ana-comp dnsmasq[934]: démarrage avec le cache désactivé (version 2.75)
Jan 31 21:52:51 ana-comp dnsmasq[934]: options à la compilation : IPv6 GNU-getopt DBus i18n IDN DHCP DHCPv6 no-Lua TFTP conntrack ipset auth DNSSEC loop-detect inotify
Jan 31 21:52:51 ana-comp dnsmasq[934]: Support DBus autorisé : connecté au bus système
Jan 31 21:52:51 ana-comp dnsmasq[934]: attention : aucun serveur amont n'est configuré
Jan 31 21:52:52 ana-comp NetworkManager[752]: <info>  [1517431972.7742] device (enp3s0): Activation: successful, device activated.
Jan 31 21:52:52 ana-comp nm-dispatcher: req:2 'up' [enp3s0]: new request (1 scripts)
Jan 31 21:52:52 ana-comp nm-dispatcher: req:2 'up' [enp3s0]: start running ordered scripts...
Jan 31 21:52:52 ana-comp NetworkManager[752]: <info>  [1517431972.7763] dnsmasq[0xfa30e0]: dnsmasq appeared as :1.20
Jan 31 21:52:52 ana-comp dnsmasq[934]: configuration des serveurs amonts à partir de DBus
Jan 31 21:52:52 ana-comp dnsmasq[934]: utilise le serveur de nom 192.168.1.254#53 (via enp3s0)
Jan 31 21:52:53 ana-comp avahi-daemon[754]: Joining mDNS multicast group on interface enp3s0.IPv6 with address fe80::d68d:ec4b:940d:652a.
Jan 31 21:52:53 ana-comp avahi-daemon[754]: New relevant interface enp3s0.IPv6 for mDNS.
Jan 31 21:52:53 ana-comp avahi-daemon[754]: Registering new address record for fe80::d68d:ec4b:940d:652a on enp3s0.*.
Jan 31 21:52:53 ana-comp NetworkManager[752]: <info>  [1517431973.5707] policy: set 'Connexion filaire 1' (enp3s0) as default for IPv6 routing and DNS
Jan 31 21:52:53 ana-comp NetworkManager[752]: <info>  [1517431973.5709] dns-mgr: Writing DNS information to /sbin/resolvconf
Jan 31 21:52:53 ana-comp dnsmasq[934]: configuration des serveurs amonts à partir de DBus
Jan 31 21:52:53 ana-comp dnsmasq[934]: utilise le serveur de nom 192.168.1.254#53 (via enp3s0)
Jan 31 21:52:53 ana-comp dnsmasq[934]: utilise le serveur de nom 2a01:e00::1#53 (via enp3s0)
Jan 31 21:52:53 ana-comp dnsmasq[934]: utilise le serveur de nom 2a01:e00::2#53 (via enp3s0)
Jan 31 21:52:53 ana-comp systemd[1]: Created slice User Slice of lightdm.
Jan 31 21:52:53 ana-comp systemd[1]: Starting User Manager for UID 108...
Jan 31 21:52:53 ana-comp systemd[1]: Started Session c1 of user lightdm.
Jan 31 21:52:53 ana-comp systemd[1093]: Reached target Paths.
Jan 31 21:52:53 ana-comp systemd[1093]: Reached target Timers.
Jan 31 21:52:53 ana-comp systemd[1093]: Reached target Sockets.
Jan 31 21:52:53 ana-comp systemd[1093]: Reached target Basic System.
Jan 31 21:52:53 ana-comp systemd[1093]: Reached target Default.
Jan 31 21:52:53 ana-comp systemd[1093]: Startup finished in 101ms.
Jan 31 21:52:53 ana-comp systemd[1]: Started User Manager for UID 108.
Jan 31 21:52:55 ana-comp avahi-daemon[754]: Leaving mDNS multicast group on interface enp3s0.IPv6 with address fe80::d68d:ec4b:940d:652a.
Jan 31 21:52:55 ana-comp avahi-daemon[754]: Joining mDNS multicast group on interface enp3s0.IPv6 with address 2a01:e34:ede5:74c0:f66d:7cbe:7cb8:20ed.
Jan 31 21:52:55 ana-comp avahi-daemon[754]: Registering new address record for 2a01:e34:ede5:74c0:f66d:7cbe:7cb8:20ed on enp3s0.*.
Jan 31 21:52:55 ana-comp avahi-daemon[754]: Withdrawing address record for fe80::d68d:ec4b:940d:652a on enp3s0.
Jan 31 21:52:55 ana-comp org.a11y.atspi.Registry[1122]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jan 31 21:52:55 ana-comp avahi-daemon[754]: Registering new address record for 2a01:e34:ede5:74c0:34b0:b8c4:4ffb:28f0 on enp3s0.*.
Jan 31 21:52:55 ana-comp NetworkManager[752]: <info>  [1517431975.5683] manager: WiFi hardware radio set enabled
Jan 31 21:52:55 ana-comp NetworkManager[752]: <info>  [1517431975.5684] manager: WWAN hardware radio set enabled
Jan 31 21:52:56 ana-comp NetworkManager[752]: <info>  [1517431976.5689] manager: startup complete
Jan 31 21:52:56 ana-comp systemd[1]: Started Network Manager Wait Online.
Jan 31 21:52:56 ana-comp systemd[1]: Reached target Network is Online.
Jan 31 21:52:56 ana-comp systemd[1]: Starting /etc/rc.local Compatibility...
Jan 31 21:52:56 ana-comp systemd[1]: Started Daily apt download activities.
Jan 31 21:52:56 ana-comp systemd[1]: Started Daily apt upgrade and clean activities.
Jan 31 21:52:56 ana-comp systemd[1]: Reached target Timers.
Jan 31 21:52:56 ana-comp systemd[1]: Started crash report submission daemon.
Jan 31 21:52:57 ana-comp systemd[1]: Started /etc/rc.local Compatibility.
Jan 31 21:52:57 ana-comp systemd[1]: Starting Hold until boot process finishes up...
Jan 31 21:52:57 ana-comp systemd[1]: Started Hold until boot process finishes up.
Jan 31 21:52:57 ana-comp systemd[1]: Started Getty on tty1.
Jan 31 21:52:57 ana-comp systemd[1]: Reached target Login Prompts.
Jan 31 21:52:57 ana-comp systemd[1]: Starting Set console scheme...
Jan 31 21:52:57 ana-comp systemd[1]: Reached target Multi-User System.
Jan 31 21:52:57 ana-comp systemd[1]: Reached target Graphical Interface.
Jan 31 21:52:57 ana-comp systemd[1]: Started Stop ureadahead data collection 45s after completed startup.
Jan 31 21:52:57 ana-comp systemd[1]: Starting Update UTMP about System Runlevel Changes...
Jan 31 21:52:57 ana-comp systemd[1]: Started Update UTMP about System Runlevel Changes.
Jan 31 21:52:57 ana-comp systemd[1]: Started Set console scheme.
Jan 31 21:52:57 ana-comp systemd[1]: Startup finished in 6.035s (kernel) + 26.737s (userspace) = 32.773s.
Jan 31 21:52:57 ana-comp whoopsie[1144]: [21:52:57] Using lock path: /var/lock/whoopsie/lock
Jan 31 21:52:57 ana-comp whoopsie[1144]: [21:52:57] The default IPv4 route is: /org/freedesktop/NetworkManager/ActiveConnection/0
Jan 31 21:52:57 ana-comp whoopsie[1144]: [21:52:57] Not a paid data plan: /org/freedesktop/NetworkManager/ActiveConnection/0
Jan 31 21:52:57 ana-comp whoopsie[1144]: [21:52:57] Found usable connection: /org/freedesktop/NetworkManager/ActiveConnection/0
Jan 31 21:52:59 ana-comp dbus[716]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Jan 31 21:53:00 ana-comp dbus[716]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Jan 31 21:53:00 ana-comp systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Jan 31 21:53:00 ana-comp dbus[716]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Jan 31 21:53:00 ana-comp systemd[1]: Started RealtimeKit Scheduling Policy Service.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Successfully called chroot.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Successfully dropped privileges.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Successfully limited resources.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Running.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Canary thread running.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Watchdog thread running.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Successfully made thread 1220 of process 1220 (n/a) owned by '108' high priority at nice level -11.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Supervising 1 threads of 1 processes of 1 users.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Supervising 1 threads of 1 processes of 1 users.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Successfully made thread 1228 of process 1220 (n/a) owned by '108' RT at priority 5.
Jan 31 21:53:00 ana-comp rtkit-daemon[1221]: Supervising 2 threads of 1 processes of 1 users.
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c: snd_pcm_avail() a retourné une valeur qui est exceptionnellement large : 612144 octets (3470 ms).
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c: Il s'agit très probablement d'un bogue dans le pilote ALSA « snd_hda_intel ». Veuillez rapporter ce problème aux développeurs d'ALSA.
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c: snd_pcm_dump():
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c: Hooks PCM
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c: Its setup is:
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   stream       : PLAYBACK
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   access       : MMAP_INTERLEAVED
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   format       : S16_LE
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   subformat    : STD
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   channels     : 2
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   rate         : 44100
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   exact rate   : 44100 (44100/1)
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   msbits       : 16
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   buffer_size  : 16384
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   period_size  : 8192
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   period_time  : 185759
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   tstamp_mode  : ENABLE
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   tstamp_type  : MONOTONIC
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   period_step  : 1
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   avail_min    : 15502
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   period_event : 0
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   start_threshold  : -1
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   stop_threshold   : 4611686018427387904
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   silence_threshold: 0
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   silence_size : 0
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   boundary     : 4611686018427387904
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c: Slave: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c: Its setup is:
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   stream       : PLAYBACK
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   access       : MMAP_INTERLEAVED
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   format       : S16_LE
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   subformat    : STD
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   channels     : 2
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   rate         : 44100
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   exact rate   : 44100 (44100/1)
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   msbits       : 16
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   buffer_size  : 16384
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   period_size  : 8192
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   period_time  : 185759
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   tstamp_mode  : ENABLE
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   tstamp_type  : MONOTONIC
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   period_step  : 1
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   avail_min    : 15502
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   period_event : 0
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   start_threshold  : -1
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   stop_threshold   : 4611686018427387904
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   silence_threshold: 0
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   silence_size : 0
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   boundary     : 4611686018427387904
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   appl_ptr     : 31770
Jan 31 21:53:04 ana-comp pulseaudio[1220]: [alsa-sink-HDMI 0] alsa-util.c:   hw_ptr       : 168422
Jan 31 21:53:04 ana-comp rtkit-daemon[1221]: Supervising 2 threads of 1 processes of 1 users.
Jan 31 21:53:04 ana-comp rtkit-daemon[1221]: Successfully made thread 1230 of process 1220 (n/a) owned by '108' RT at priority 5.
Jan 31 21:53:04 ana-comp rtkit-daemon[1221]: Supervising 3 threads of 1 processes of 1 users.
Jan 31 21:53:04 ana-comp rtkit-daemon[1221]: Supervising 3 threads of 1 processes of 1 users.
Jan 31 21:53:04 ana-comp rtkit-daemon[1221]: Successfully made thread 1231 of process 1220 (n/a) owned by '108' RT at priority 5.
Jan 31 21:53:04 ana-comp rtkit-daemon[1221]: Supervising 4 threads of 1 processes of 1 users.
Jan 31 21:53:04 ana-comp rtkit-daemon[1221]: Successfully made thread 1233 of process 1233 (n/a) owned by '108' high priority at nice level -11.
Jan 31 21:53:04 ana-comp rtkit-daemon[1221]: Supervising 5 threads of 2 processes of 1 users.
Jan 31 21:53:04 ana-comp pulseaudio[1233]: [pulseaudio] pid.c: Daemon already running.
Jan 31 21:53:04 ana-comp dbus[716]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Jan 31 21:53:04 ana-comp systemd[1]: Starting Daemon for power management...
Jan 31 21:53:05 ana-comp dbus[716]: [system] Successfully activated service 'org.freedesktop.UPower'
Jan 31 21:53:05 ana-comp systemd[1]: Started Daemon for power management.
Jan 31 21:53:05 ana-comp dbus[716]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Jan 31 21:53:05 ana-comp systemd[1]: Starting Manage, Install and Generate Color Profiles...
Jan 31 21:53:05 ana-comp dbus[716]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Jan 31 21:53:05 ana-comp systemd[1]: Started Manage, Install and Generate Color Profiles.
Jan 31 22:28:08 ana-comp systemd[1093]: Time has been changed
Jan 31 22:28:08 ana-comp systemd-timesyncd[557]: Synchronized to time server [2001:67c:1560:8003::c7]:123 (ntp.ubuntu.com).
Jan 31 22:28:08 ana-comp systemd[1]: Time has been changed
Jan 31 22:28:20 ana-comp rtkit-daemon[1221]: The canary thread is apparently starving. Taking action.
Jan 31 22:28:20 ana-comp rtkit-daemon[1221]: Demoting known real-time threads.
Jan 31 22:28:20 ana-comp rtkit-daemon[1221]: Successfully demoted thread 1231 of process 1220 (n/a).
Jan 31 22:28:20 ana-comp rtkit-daemon[1221]: Successfully demoted thread 1230 of process 1220 (n/a).
Jan 31 22:28:20 ana-comp rtkit-daemon[1221]: Successfully demoted thread 1228 of process 1220 (n/a).
Jan 31 22:28:20 ana-comp rtkit-daemon[1221]: Successfully demoted thread 1220 of process 1220 (n/a).
Jan 31 22:28:20 ana-comp rtkit-daemon[1221]: Demoted 4 threads.
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: snd_pcm_delay() a retourné une valeur qui est exceptionnellement large : -1255192 octets (-7115 ms).
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: Il s'agit très probablement d'un bogue dans le pilote ALSA « snd_hda_intel ». Veuillez rapporter ce problème aux développeurs d'ALSA.
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: snd_pcm_dump():
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: Soft volume PCM
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: Control: PCM Playback Volume
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: min_dB: -51
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: max_dB: 0
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: resolution: 256
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: Its setup is:
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   stream       : PLAYBACK
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   access       : MMAP_INTERLEAVED
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   format       : S16_LE
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   subformat    : STD
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   channels     : 2
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   rate         : 44100
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   exact rate   : 44100 (44100/1)
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   msbits       : 16
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   buffer_size  : 16384
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   period_size  : 8192
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   period_time  : 185759
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   tstamp_mode  : ENABLE
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   tstamp_type  : MONOTONIC
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   period_step  : 1
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   avail_min    : 15502
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   period_event : 0
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   start_threshold  : -1
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   stop_threshold   : 4611686018427387904
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   silence_threshold: 0
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   silence_size : 0
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   boundary     : 4611686018427387904
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: Slave: Hardware PCM card 0 'HDA ATI SB' device 0 subdevice 0
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c: Its setup is:
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   stream       : PLAYBACK
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   access       : MMAP_INTERLEAVED
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   format       : S16_LE
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   subformat    : STD
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   channels     : 2
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   rate         : 44100
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   exact rate   : 44100 (44100/1)
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   msbits       : 16
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   buffer_size  : 16384
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   period_size  : 8192
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   period_time  : 185759
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   tstamp_mode  : ENABLE
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   tstamp_type  : MONOTONIC
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   period_step  : 1
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   avail_min    : 15502
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   period_event : 0
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   start_threshold  : -1
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   stop_threshold   : 4611686018427387904
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   silence_threshold: 0
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   silence_size : 0
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   boundary     : 4611686018427387904
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   appl_ptr     : 415586
Jan 31 22:28:20 ana-comp pulseaudio[1220]: [alsa-sink-ALC889A Analog] alsa-util.c:   hw_ptr       : 729384
Jan 31 22:28:23 ana-comp pulseaudio[1220]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out
Jan 31 22:28:32 ana-comp rtkit-daemon[1221]: The canary thread is apparently starving. Taking action.
Jan 31 22:28:32 ana-comp rtkit-daemon[1221]: Demoting known real-time threads.
Jan 31 22:28:32 ana-comp rtkit-daemon[1221]: Successfully demoted thread 1231 of process 1220 (n/a).
Jan 31 22:28:32 ana-comp rtkit-daemon[1221]: Successfully demoted thread 1230 of process 1220 (n/a).
Jan 31 22:28:32 ana-comp rtkit-daemon[1221]: Successfully demoted thread 1228 of process 1220 (n/a).
Jan 31 22:28:32 ana-comp rtkit-daemon[1221]: Successfully demoted thread 1220 of process 1220 (n/a).
Jan 31 22:28:32 ana-comp rtkit-daemon[1221]: Demoted 4 threads.
Jan 31 22:28:45 ana-comp systemd[1]: Starting Stop ureadahead data collection...
Jan 31 22:28:45 ana-comp systemd[1]: Stopped Read required files in advance.
Jan 31 22:28:45 ana-comp systemd[1]: Started Stop ureadahead data collection.
Jan 31 22:43:08 ana-comp systemd[1]: Starting Cleanup of Temporary Directories...
Jan 31 22:43:09 ana-comp systemd-tmpfiles[1288]: [/usr/lib/tmpfiles.d/var.conf:14] Duplicate line for path "/var/log", ignoring.
Jan 31 22:43:09 ana-comp systemd[1]: Started Cleanup of Temporary Directories.
Jan 31 23:17:01 ana-comp CRON[1299]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb  1 00:17:01 ana-comp CRON[1317]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb  1 01:05:07 ana-comp org.gtk.vfs.Daemon[1106]: A connection to the bus can't be made
Feb  1 01:05:07 ana-comp systemd[1]: Created slice User Slice of ana.
Feb  1 01:05:07 ana-comp systemd[1]: Starting User Manager for UID 1000...
Feb  1 01:05:07 ana-comp systemd[1]: Started Session c2 of user ana.
Feb  1 01:05:07 ana-comp systemd[1339]: Reached target Timers.
Feb  1 01:05:07 ana-comp systemd[1339]: Reached target Sockets.
Feb  1 01:05:07 ana-comp systemd[1339]: Reached target Paths.
Feb  1 01:05:07 ana-comp systemd[1339]: Reached target Basic System.
Feb  1 01:05:07 ana-comp systemd[1339]: Reached target Default.
Feb  1 01:05:07 ana-comp systemd[1339]: Startup finished in 121ms.
Feb  1 01:05:07 ana-comp systemd[1]: Started User Manager for UID 1000.
Feb  1 01:05:11 ana-comp org.ayatana.bamf[1434]: bamfdaemon start/running, process 1510
Feb  1 01:05:11 ana-comp org.a11y.Bus[1434]: Activating service name='org.a11y.atspi.Registry'
Feb  1 01:05:11 ana-comp org.a11y.Bus[1434]: ** (process:1533): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Feb  1 01:05:11 ana-comp org.a11y.Bus[1434]: Successfully activated service 'org.a11y.atspi.Registry'
Feb  1 01:05:11 ana-comp org.a11y.atspi.Registry[1538]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Feb  1 01:05:12 ana-comp dbus[716]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Feb  1 01:05:12 ana-comp rtkit-daemon[1221]: Successfully made thread 1655 of process 1655 (n/a) owned by '1000' high priority at nice level -11.
Feb  1 01:05:12 ana-comp rtkit-daemon[1221]: Supervising 1 threads of 1 processes of 1 users.
Feb  1 01:05:13 ana-comp rtkit-daemon[1221]: Supervising 1 threads of 1 processes of 1 users.
Feb  1 01:05:13 ana-comp rtkit-daemon[1221]: Successfully made thread 1664 of process 1655 (n/a) owned by '1000' RT at priority 5.
Feb  1 01:05:13 ana-comp rtkit-daemon[1221]: Supervising 2 threads of 1 processes of 1 users.
Feb  1 01:05:13 ana-comp systemd[1]: Started CUPS Scheduler.
Feb  1 01:05:13 ana-comp rtkit-daemon[1221]: Supervising 2 threads of 1 processes of 1 users.
Feb  1 01:05:13 ana-comp rtkit-daemon[1221]: Successfully made thread 1681 of process 1655 (n/a) owned by '1000' RT at priority 5.
Feb  1 01:05:13 ana-comp rtkit-daemon[1221]: Supervising 3 threads of 1 processes of 1 users.
Feb  1 01:05:13 ana-comp rtkit-daemon[1221]: Supervising 3 threads of 1 processes of 1 users.
Feb  1 01:05:13 ana-comp rtkit-daemon[1221]: Successfully made thread 1682 of process 1655 (n/a) owned by '1000' RT at priority 5.
Feb  1 01:05:13 ana-comp rtkit-daemon[1221]: Supervising 4 threads of 1 processes of 1 users.
Feb  1 01:05:14 ana-comp org.gnome.ScreenSaver[1434]: ** (gnome-screensaver:1648): WARNING **: Couldn't get presence status: The name org.gnome.SessionManager was not provided by any .service files
Feb  1 01:05:14 ana-comp dbus[716]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
Feb  1 01:05:14 ana-comp systemd[1]: Starting Locale Service...
Feb  1 01:05:15 ana-comp dbus[716]: [system] Successfully activated service 'org.freedesktop.locale1'
Feb  1 01:05:15 ana-comp systemd[1]: Started Locale Service.
Feb  1 01:05:17 ana-comp gnome-session[1588]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Feb  1 01:05:17 ana-comp gnome-session[1588]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Feb  1 01:05:17 ana-comp gnome-session[1588]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Feb  1 01:05:18 ana-comp gnome-session[1588]: (process:1742): indicator-application-service-WARNING **: Name Lost
Feb  1 01:05:20 ana-comp gnome-session-binary[1588]: Entering running state
Feb  1 01:05:20 ana-comp dbus[716]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Feb  1 01:05:20 ana-comp systemd[1]: Starting Disk Manager...
Feb  1 01:05:20 ana-comp udisksd[1772]: udisks daemon version 2.1.7 starting
Feb  1 01:05:20 ana-comp dbus[716]: [system] Activating service name='org.freedesktop.fwupd' (using servicehelper)
Feb  1 01:05:20 ana-comp dbus[716]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Feb  1 01:05:20 ana-comp systemd[1]: Started Disk Manager.
Feb  1 01:05:20 ana-comp udisksd[1772]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Feb  1 01:05:23 ana-comp org.gtk.vfs.AfcVolumeMonitor[1434]: Volume monitor alive
Feb  1 01:05:24 ana-comp org.freedesktop.fwupd[716]: (fwupd:1781): Fu-WARNING **: Failed to coldplug: UEFI firmware updating not supported
Feb  1 01:05:24 ana-comp dbus[716]: [system] Successfully activated service 'org.freedesktop.fwupd'
Feb  1 01:05:25 ana-comp org.gnome.ScreenSaver[1434]: ** Message: Lost the name, shutting down.
Feb  1 01:05:27 ana-comp systemd[1]: Stopping User Manager for UID 108...
Feb  1 01:05:27 ana-comp systemd[1093]: Reached target Shutdown.
Feb  1 01:05:27 ana-comp systemd[1093]: Stopped target Default.
Feb  1 01:05:27 ana-comp systemd[1093]: Starting Exit the Session...
Feb  1 01:05:27 ana-comp systemd[1093]: Stopped target Basic System.
Feb  1 01:05:27 ana-comp systemd[1093]: Stopped target Sockets.
Feb  1 01:05:27 ana-comp systemd[1093]: Stopped target Paths.
Feb  1 01:05:27 ana-comp systemd[1093]: Stopped target Timers.
Feb  1 01:05:27 ana-comp systemd[1093]: Received SIGRTMIN+24 from PID 1900 (kill).
Feb  1 01:05:27 ana-comp systemd[1]: Stopped User Manager for UID 108.
Feb  1 01:05:27 ana-comp systemd[1]: Removed slice User Slice of lightdm.
Feb  1 01:05:37 ana-comp pulseaudio[1655]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out
Feb  1 01:05:41 ana-comp org.gnome.zeitgeist.Engine[1434]: ** (zeitgeist-datahub:2075): WARNING **: zeitgeist-datahub.vala:229: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
Feb  1 01:05:41 ana-comp gnome-session[1588]: (zeitgeist-datahub:2054): Gtk-WARNING **: Attempting to read the recently used resources file at '/home/ana/.local/share/recently-used.xbel', but the parser failed: Failed to open file '/home/ana/.local/share/recently-used.xbel': Permission denied.

Et le rapport smartctl

sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de ana : 
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.13.0-32-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F3
Device Model:     SAMSUNG HD103SJ
Serial Number:    S246JDWSC49382
LU WWN Device Id: 5 0024e9 002a6f4a1
Firmware Version: 1AJ100E4
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Feb  1 01:11:45 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 9180) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 153) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       13
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   079   072   025    Pre-fail  Always       -       6478
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2094
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       1
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       21360
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2116
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       1
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   055   000    Old_age   Always       -       29 (Min/Max 5/45)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       1
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   100   100   000    Old_age   Always       -       2
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       137
223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       2125

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

moko138 · Le 01/02/2018, à 07:43

[HS]

xubu1957 a écrit :

Autre info :
traduction a écrit :
noapic Disable the "Advanced Programmable Interrupt Controller (APIC)".
nolapic Disable the "local APIC".
Il y a deux composants dans le système Intel APIC, l'APIC local (LAPIC) et l'APIC I/O. Ce dernier achemine les interruptions qu'il reçoit des bus périphériques vers un ou plusieurs APIC locaux qui se trouvent dans le processeur. Il est vraiment utile pour les systèmes multiprocesseurs. Certains ordinateurs ont des problèmes avec le système APIC, ce qui peut provoquer des blocages ou une détection incorrecte du périphérique (message d'erreur " Spurious 8259A interrupt : IRQ7 "). Dans ce cas, désactivez APIC et/ou APIC local.
> /wiki.mageia.org/en/How_to_set_up_kernel_options

xubu1957, tu me sauves !
Mon pc se fige parfois pendant une minute, mais, malgré mes recherches, jamais je n'aurais fait le recoupement avec cette mention absconse qui n'apparaît que pendant la première seconde :

cat /var/log/kern.log | grep -C5 spurious
Jan 31 20:34:46 mon-pc kernel: [    0.000000] Hierarchical RCU implementation.
Jan 31 20:34:46 mon-pc kernel: [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
Jan 31 20:34:46 mon-pc kernel: [    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Jan 31 20:34:46 mon-pc kernel: [    0.000000] NR_IRQS:2304 nr_irqs:712 16
Jan 31 20:34:46 mon-pc kernel: [    0.000000] CPU 0 irqstacks, hard=f2c08000 soft=f2c0a000
Jan 31 20:34:46 mon-pc kernel: [    0.000000] spurious 8259A interrupt: IRQ7.
Jan 31 20:34:46 mon-pc kernel: [    0.000000] Console: colour dummy device 80x25
Jan 31 20:34:46 mon-pc kernel: [    0.000000] console [tty0] enabled
Jan 31 20:34:46 mon-pc kernel: [    0.000000] hpet clockevent registered
Jan 31 20:34:46 mon-pc kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Jan 31 20:34:46 mon-pc kernel: [    0.000000] tsc: Detected 2611.964 MHz processor

Je vais donc tester les options noapic et/ou nolapic et/ou noioapic selon l'astucieuse méthode de ?? en #24.

À noter 1 : bien que ht tps://wiki.mageia.org/en/How_to_set_up_kernel_options parle du "Intel APIC system", mon CPU est un AMD.
[/HS]

À noter 2 :
Quelques lignes sous "spurious 8259A interrupt: IRQ7.", j'ai

tsc: Marking TSC unstable due to TSCs unsynchronized

Wusha, de son côté, a :

tsc: Marking TSC unstable due to clocksource watchdog

c'est aussi une des pistes à explorer, j'y reviens tout de suite.

xubu1957 · Le 01/02/2018, à 07:52

Bonjour,

@ moko138

Si tu vois une idée dans > AMD AM2 X2 Timing problems [SOLVED]

> .freedesktop.org/archives/nouveau/2016-November (lien corrigé)

> github.com/QubesOS/qubes-issues/

Dernière modification par xubu1957 (Le 01/02/2018, à 08:39)

moko138 · Le 01/02/2018, à 08:17

Je reviens sur le dmesg de Wusha en #13. On y lit :

1)

[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xfbfe000000-0xfbffffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM

Donc, changement(s) à faire dans le bios :
1.1) "Please enable the IOMMU option in the BIOS setup", c'est demandé en toutes lettres.

1.2) Et il sera utile de changer, vers le maximum, le réglage de l' "aperture memory hole" (si ton bios présente bien la possibilité de régler ce paramètre).

N'hésite pas à nous poster des photos (pas trop lourdes, s'il te plaît...) des écrans de ton bios, si tu as des doutes ou des questions.

2) "spurious 8259A interrupt: IRQ7" et son problème d'horloge

[    0.000000] spurious 8259A interrupt: IRQ7.
(...)
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3019.878 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6039.75 BogoMIPS (lpj=12079512)
[    0.004000] pid_max: default: 32768 minimum: 301
(...)
[    0.112039] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.112039] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.116047] clocksource: Switched to clocksource hpet
(...)
[  316.799657] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large:
[  316.799658] clocksource:                       'hpet' wd_now: edae8cf wd_last: ecca7b8 mask: ffffffff
[  316.799659] clocksource:                       'tsc' cs_now: f05ea599f8 cs_last: 1d6629e1f4 mask: ffffffffffffffff
[  316.799662] tsc: Marking TSC unstable due to clocksource watchdog
[  316.799680] 	0-...: (1 ticks this GP) idle=996/1/0 softirq=1449/1449 fqs=0 
[  316.799700] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[  316.799702] sched_clock: Marking unstable (316799708244, -9064)<-(317351390762, -551691159)
[  316.799717] 	 (t=74992 jiffies g=347 c=346 q=344)

Je ne sais pas si "Use 'tsc=unstable'." est
un compte-rendu
ou une injonction (quoique, cette fois, il n'y ait écrit ni "please" ni "option").
Quelqu'un y voit-il clair ? De toute façon, ça me semble à approfondir.

3) Un autre "please... option" :

[    1.633308] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.633309] i8042: If AUX port is really absent please use the 'i8042.noaux' option

Option à tester selon la méthode de ??.

4) Enfin, puisqu'il y a des problèmes matériels et que nous n'avons qu'une vague idée de ton matériel, il serait bon qu'après un

sudo apt update

tu nous montres le retour complet de

sudo lshw

(il faut patienter quelques dizaines de secondes jusqu'au retour de l'invite de commande).
Je te remercie.

moko138 · Le 01/02/2018, à 08:26

Wusha,
Dans ton boot-info :

boot-info is executed in installed-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
BOOT_IMAGE=/boot/vmlinuz-4.10 (...)

ton ubuntu est en 64 bits
et n'était pas à jour le 29/1 à 10h57.

xubu1957 · Le 01/02/2018, à 08:33

@ moko138

Autres infos dans > Problèmes d'installation Ubuntu

moko138 · Le 01/02/2018, à 08:35

xubu1957,
Oui, j'avais commencé à potasser ton premier lien. Et en effet, contrairement à Wusha, j'ai installé du 32 bits sur un CPU 64 bits.
Je commence à étudier ton 3ème lien, merci !

Peux-tu corriger le 2nd, cassé, s'il te plaît ?

xubu1957 · Le 01/02/2018, à 08:40

Peux-tu corriger le 2nd, cassé, s'il te plaît ?

Correction faite.

?? · Le 01/02/2018, à 15:59

Bonjour

Wusha a écrit :

Temps pour accéder à la page d'identification: 11 min 23 min 16 min
?? a écrit :
Bonjour
Lorsque tu as l'écran d'accueil, prends la seconde ligne (mode avancé)
Puis une ligne contenant le mot recovery
Tu devrais booter. Tu diras, le temps que cela prend .

C'est uniquement au cas où il y aurait un second problème, si le temps de démarrge retombe à 5 minutes.....

?? · Le 01/02/2018, à 16:23

Wusha a écrit :

Alors j'ai essayé les 3 commandes sur le /boot/grub/grub.cfg, a chaque fois je suis obligée de booter en mode sans échec.

Voici le rapport de tail -500 /var/log/syslog

tail -500 /var/log/syslog
............
Jan 31 21:52:44 ana-comp kernel: [  603.156721] hid-generic 0003:1532:010B.0003: input,hidraw2: USB HID v1.10 Device [Razer Razer Arctosa] on usb-0000:00:13.1-1/input1
Jan 31 21:52:44 ana-comp kernel: [  903.162717] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large:
Jan 31 21:52:44 ana-comp kernel: [  903.162718] clocksource:                       'hpet' wd_now: 2ec568d wd_last: 27c60e7 mask: ffffffff
Jan 31 21:52:44 ana-comp kernel: [  903.162719] clocksource:                       'tsc' cs_now: 28b0d36a7c8 cs_last: 1b7c43a77f6 mask: ffffffffffffffff
Jan 31 21:52:44 ana-comp kernel: [  903.162721] tsc: Marking TSC unstable due to clocksource watchdog
Jan 31 21:52:44 ana-comp kernel: [  903.162730] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
Jan 31 21:52:44 ana-comp kernel: [  903.162731] sched_clock: Marking unstable (3264496226, 0)<-(903302370375, -139640683)
Jan 31 21:52:44 ana-comp kernel: [    5.088514] floppy0: no floppy controllers found
Jan 31 21:52:44 ana-comp kernel: [    5.362977] EXT4-fs (sda2): mounted filesystem with 
.....
Jan 31 21:52:48 ana-comp kernel: [   23.701780] r8169 0000:03:00.0 enp3s0: link down
Jan 31 21:52:48 ana-comp kernel: [   23.701783] r8169 0000:03:00.0 enp3s0: link down
Jan 31 21:52:48 ana-comp kernel: [   23.701816] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready

Jan 31 21:52:57 ana-comp systemd[1]: Startup finished in 6.035s (kernel) + 26.737s (userspace) = 32.773s.
.......
Jan 31 22:43:09 ana-comp systemd[1]: Started Cleanup of Temporary Directories.
Jan 31 23:17:01 ana-comp CRON[1299]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb  1 00:17:01 ana-comp CRON[1317]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

Je ne suis pas remonté assez loin dans le temps pour avoir le début, Mais pour le moment, On voit les 903 secondes du début du boot qui deviennent 5 secondes.......

Jan 31 21:52:44 ana-comp kernel: [  903.162731] sched_clock: Marking unstable (3264496226, 0)<-(903302370375, -139640683)
Jan 31 21:52:44 ana-comp kernel: [    5.088514] floppy0: no floppy controllers found

Mystère...... Mais c'est l'explication de cette anomalie

an 31 21:52:57 ana-comp systemd[1]: Startup finished in 6.035s (kernel) + 26.737s (userspace) = 32.773s.

J'ai trouvé une explication en anglais de cette fonctionnalité https://software.intel.com/en-us/blogs/ … r-a-stable
Il apparaitrait qu'il faille modifier un fichier dans la structure /etc/sysconfig/XXXXXXX
Ou que tout simplement dans le bios, tu déactives la gestion avancée de l'énergie... si cette chose existe.

J'ai aussi noté que tu venais d'installer ubuntu. Alors as-tu pensé à le mettre à jour?

sudo apt update
sudo apt upgrade

Tu donneras aussi le résultat de ces deux commandes

cat /sys/devices/system/clocksource/clocksource0/available_clocksource
cat /sys/devices/system/clocksource/clocksource0/current_clocksource

Je pense que dans les deux cas, tu auras le seul mot acpi_pm

Dernière modification par ?? (Le 01/02/2018, à 17:09)

moko138 · Le 01/02/2018, à 16:51

As-tu lu le #36 ?

Wusha · Le 01/02/2018, à 23:34

Alors je vous fais les rapports demandés et je tente d'aller voir dans le BiOS pour la "iommu option".

Moko, en ce qui concerne le point 3 de ton post #36 sur les ports AUX, c'est normal. Ça fait des années que les prises auxiliaires de la façade de ma tour sont HS.

sudo lshw
ana-comp                  
    description: Ordinateur de Bureau
    produit: GA-MA790XT-UD4P
    fabriquant: Gigabyte Technology Co., Ltd.
    bits: 64 bits
    fonctionnalités: smbios-2.4 dmi-2.4 vsyscall32
    configuration: boot=normal chassis=desktop uuid=30303234-3144-4332-3931-3336FFFFFFFF
  *-core
       description: Carte mère
       produit: GA-MA790XT-UD4P
       fabriquant: Gigabyte Technology Co., Ltd.
       identifiant matériel: 0
       version: x.x
     *-firmware
          description: BIOS
          fabriquant: Award Software International, Inc.
          identifiant matériel: 0
          version: F8g
          date: 07/12/2010
          taille: 128KiB
          capacité: 960KiB
          fonctionnalités: isa pci pnp apm upgrade shadowing cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
     *-cpu
          description: CPU
          produit: AMD Phenom(tm) II X4 945 Processor
          fabriquant: Advanced Micro Devices [AMD]
          identifiant matériel: 4
          information bus: cpu@0
          version: AMD Phenom(tm) II X4 945 Processor
          emplacement: Socket M2
          taille: 800MHz
          capacité: 3200MHz
          bits: 64 bits
          horloge: 201MHz
          fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save cpufreq
        *-cache:0
             description: L1 cache
             identifiant matériel: a
             emplacement: Internal Cache
             taille: 128KiB
             capacité: 128KiB
             fonctionnalités: synchronous internal write-back
             configuration: level=1
        *-cache:1
             description: L3 cache
             identifiant matériel: c
             emplacement: External Cache
             taille: 512KiB
             capacité: 512KiB
             fonctionnalités: synchronous internal write-back
             configuration: level=3
     *-cache
          description: L1 cache
          identifiant matériel: b
          emplacement: Internal Cache
          taille: 128KiB
          capacité: 128KiB
          fonctionnalités: synchronous internal write-back
          configuration: level=1
     *-memory
          description: Mémoire Système
          identifiant matériel: 29
          emplacement: Carte mère
          taille: 4GiB
        *-bank:0
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2017-11-09 20:09+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2017-12-10 10:57+0000X-Generator: Launchpad (build 18511) 1333 MHz (0,8 ns)
             identifiant matériel: 0
             emplacement: A0
             taille: 2GiB
             bits: 64 bits
             horloge: 1333MHz (0.8ns)
        *-bank:1
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2017-11-09 20:09+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2017-12-10 10:57+0000X-Generator: Launchpad (build 18511) 1333 MHz (0,8 ns)
             identifiant matériel: 1
             emplacement: A1
             taille: 2GiB
             bits: 64 bits
             horloge: 1333MHz (0.8ns)
        *-bank:2
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2017-11-09 20:09+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2017-12-10 10:57+0000X-Generator: Launchpad (build 18511) 1333 MHz (0,8 ns) [vide]
             identifiant matériel: 2
             emplacement: A2
             bits: 64 bits
             horloge: 1333MHz (0.8ns)
        *-bank:3
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2017-11-09 20:09+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2017-12-10 10:57+0000X-Generator: Launchpad (build 18511) 1333 MHz (0,8 ns) [vide]
             identifiant matériel: 3
             emplacement: A3
             bits: 64 bits
             horloge: 1333MHz (0.8ns)
     *-pci:0
          description: Host bridge
          produit: RD780 Host Bridge
          fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 00
          bits: 64 bits
          horloge: 66MHz
          configuration: latency=32
        *-pci:0
             description: PCI bridge
             produit: RX780/RD790 PCI to PCI bridge (external gfx0 port A)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:18 portE/S:e000(taille=4096) mémoire:fde00000-fdefffff portE/S:d0000000(taille=268435456)
           *-display
                description: VGA compatible controller
                produit: RV790 [Radeon HD 4890]
                fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                version: 00
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
                configuration: driver=radeon latency=0
                ressources: irq:25 mémoire:d0000000-dfffffff mémoire:fdee0000-fdeeffff portE/S:ee00(taille=256) mémoire:c0000-dffff
           *-multimedia
                description: Audio device
                produit: RV770 HDMI Audio [Radeon HD 4850/4870]
                fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
                identifiant matériel: 0.1
                information bus: pci@0000:01:00.1
                version: 00
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm pciexpress msi bus_master cap_list
                configuration: driver=snd_hda_intel latency=0
                ressources: irq:26 mémoire:fdefc000-fdefffff
        *-pci:1
             description: PCI bridge
             produit: RD790 PCI to PCI bridge (PCI express gpp port A)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 4
             information bus: pci@0000:00:04.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16 portE/S:d000(taille=4096) mémoire:fdd00000-fddfffff portE/S:fdc00000(taille=1048576)
           *-storage
                description: SATA controller
                produit: JMB363 SATA/IDE Controller
                fabriquant: JMicron Technology Corp.
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                version: 02
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: storage pm pciexpress ahci_1.0 bus_master cap_list
                configuration: driver=ahci latency=0
                ressources: irq:16 mémoire:fddfe000-fddfffff
           *-ide
                description: IDE interface
                produit: JMB363 SATA/IDE Controller
                fabriquant: JMicron Technology Corp.
                identifiant matériel: 0.1
                information bus: pci@0000:02:00.1
                version: 02
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: ide pm bus_master cap_list
                configuration: driver=pata_jmicron latency=0
                ressources: irq:17 portE/S:df00(taille=8) portE/S:de00(taille=4) portE/S:dd00(taille=8) portE/S:dc00(taille=4) portE/S:db00(taille=16)
        *-pci:2
             description: PCI bridge
             produit: RD790 PCI to PCI bridge (PCI express gpp port F)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: a
             information bus: pci@0000:00:0a.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:18 portE/S:c000(taille=4096) mémoire:fd900000-fd9fffff portE/S:fdf00000(taille=1048576)
           *-network
                description: Ethernet interface
                produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                nom logique: enp3s0
                version: 02
                numéro de série: 00:24:1d:c2:91:36
                taille: 1Gbit/s
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
                ressources: irq:24 portE/S:ce00(taille=256) mémoire:fdfff000-fdffffff mémoire:fdfe0000-fdfeffff mémoire:fd900000-fd90ffff
        *-storage
             description: SATA controller
             produit: SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 11
             information bus: pci@0000:00:11.0
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: storage pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=32
             ressources: irq:22 portE/S:ff00(taille=8) portE/S:fe00(taille=4) portE/S:fd00(taille=8) portE/S:fc00(taille=4) portE/S:fb00(taille=16) mémoire:fe02f000-fe02f3ff
        *-usb:0
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 12
             information bus: pci@0000:00:12.0
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=32
             ressources: irq:16 mémoire:fe02e000-fe02efff
           *-usbhost
                produit: OHCI PCI host controller
                fabriquant: Linux 4.13.0-32-generic ohci_hcd
                identifiant matériel: 1
                information bus: usb@3
                nom logique: usb3
                version: 4.13
                fonctionnalités: usb-1.10
                configuration: driver=hub slots=3 speed=12Mbit/s
        *-usb:1
             description: USB controller
             produit: SB7x0 USB OHCI1 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 12.1
             information bus: pci@0000:00:12.1
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=32
             ressources: irq:16 mémoire:fe02d000-fe02dfff
           *-usbhost
                produit: OHCI PCI host controller
                fabriquant: Linux 4.13.0-32-generic ohci_hcd
                identifiant matériel: 1
                information bus: usb@4
                nom logique: usb4
                version: 4.13
                fonctionnalités: usb-1.10
                configuration: driver=hub slots=3 speed=12Mbit/s
        *-usb:2
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 12.2
             information bus: pci@0000:00:12.2
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             ressources: irq:17 mémoire:fe02c000-fe02c0ff
           *-usbhost
                produit: EHCI Host Controller
                fabriquant: Linux 4.13.0-32-generic ehci_hcd
                identifiant matériel: 1
                information bus: usb@1
                nom logique: usb1
                version: 4.13
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=6 speed=480Mbit/s
        *-usb:3
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 13
             information bus: pci@0000:00:13.0
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=32
             ressources: irq:18 mémoire:fe02b000-fe02bfff
           *-usbhost
                produit: OHCI PCI host controller
                fabriquant: Linux 4.13.0-32-generic ohci_hcd
                identifiant matériel: 1
                information bus: usb@5
                nom logique: usb5
                version: 4.13
                fonctionnalités: usb-1.10
                configuration: driver=hub slots=3 speed=12Mbit/s
              *-usb
                   description: Souris
                   produit: Razer Salmosa
                   fabriquant: Razer
                   identifiant matériel: 3
                   information bus: usb@5:3
                   version: 1.00
                   fonctionnalités: usb-2.00
                   configuration: driver=usbhid maxpower=100mA speed=12Mbit/s
        *-usb:4
             description: USB controller
             produit: SB7x0 USB OHCI1 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 13.1
             information bus: pci@0000:00:13.1
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=32
             ressources: irq:18 mémoire:fe02a000-fe02afff
           *-usbhost
                produit: OHCI PCI host controller
                fabriquant: Linux 4.13.0-32-generic ohci_hcd
                identifiant matériel: 1
                information bus: usb@6
                nom logique: usb6
                version: 4.13
                fonctionnalités: usb-1.10
                configuration: driver=hub slots=3 speed=12Mbit/s
              *-usb
                   description: Clavier
                   produit: Razer Arctosa
                   fabriquant: Razer
                   identifiant matériel: 1
                   information bus: usb@6:1
                   version: 0.02
                   fonctionnalités: usb-1.10
                   configuration: driver=usbhid maxpower=100mA speed=12Mbit/s
        *-usb:5
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 13.2
             information bus: pci@0000:00:13.2
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             ressources: irq:19 mémoire:fe029000-fe0290ff
           *-usbhost
                produit: EHCI Host Controller
                fabriquant: Linux 4.13.0-32-generic ehci_hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 4.13
                fonctionnalités: usb-2.00
                configuration: driver=hub slots=6 speed=480Mbit/s
        *-serial NON-RÉCLAMÉ
             description: SMBus
             produit: SBx00 SMBus Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 3c
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ht cap_list
             configuration: latency=0
        *-ide
             description: IDE interface
             produit: SB7x0/SB8x0/SB9x0 IDE Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.1
             information bus: pci@0000:00:14.1
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ide msi bus_master cap_list
             configuration: driver=pata_atiixp latency=32
             ressources: irq:16 portE/S:1f0(taille=8) portE/S:3f6 portE/S:170(taille=8) portE/S:376 portE/S:fa00(taille=16)
        *-multimedia
             description: Audio device
             produit: SBx00 Azalia (Intel HDA)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.2
             information bus: pci@0000:00:14.2
             version: 00
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             ressources: irq:16 mémoire:fe024000-fe027fff
        *-isa
             description: ISA bridge
             produit: SB7x0/SB8x0/SB9x0 LPC host controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.3
             information bus: pci@0000:00:14.3
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: isa bus_master
             configuration: latency=0
        *-pci:3
             description: PCI bridge
             produit: SBx00 PCI to PCI Bridge
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.4
             information bus: pci@0000:00:14.4
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pci subtractive_decode bus_master vga_palette
             ressources: portE/S:b000(taille=4096) mémoire:fdb00000-fdbfffff mémoire:fda00000-fdafffff
           *-firewire
                description: FireWire (IEEE 1394)
                produit: TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
                fabriquant: Texas Instruments
                identifiant matériel: e
                information bus: pci@0000:04:0e.0
                version: 00
                bits: 32 bits
                horloge: 33MHz
                fonctionnalités: pm ohci bus_master cap_list
                configuration: driver=firewire_ohci latency=32 maxlatency=4 mingnt=2
                ressources: irq:22 mémoire:fdbff000-fdbff7ff mémoire:fdbf8000-fdbfbfff
        *-usb:6
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.5
             information bus: pci@0000:00:14.5
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=32
             ressources: irq:18 mémoire:fe028000-fe028fff
           *-usbhost
                produit: OHCI PCI host controller
                fabriquant: Linux 4.13.0-32-generic ohci_hcd
                identifiant matériel: 1
                information bus: usb@7
                nom logique: usb7
                version: 4.13
                fonctionnalités: usb-1.10
                configuration: driver=hub slots=2 speed=12Mbit/s
     *-pci:1
          description: Host bridge
          produit: Family 10h Processor HyperTransport Configuration
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 101
          information bus: pci@0000:00:18.0
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:2
          description: Host bridge
          produit: Family 10h Processor Address Map
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 102
          information bus: pci@0000:00:18.1
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:3
          description: Host bridge
          produit: Family 10h Processor DRAM Controller
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 103
          information bus: pci@0000:00:18.2
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:4
          description: Host bridge
          produit: Family 10h Processor Miscellaneous Control
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 104
          information bus: pci@0000:00:18.3
          version: 00
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=k10temp
          ressources: irq:0
     *-pci:5
          description: Host bridge
          produit: Family 10h Processor Link Control
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 105
          information bus: pci@0000:00:18.4
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-scsi:0
          identifiant matériel: 1
          nom logique: scsi2
          fonctionnalités: emulated
        *-cdrom
             description: DVD-RAM writer
             produit: DVDRAM GH22NS50
             fabriquant: HL-DT-ST
             identifiant matériel: 0.0.0
             information bus: scsi@2:0.0.0
             nom logique: /dev/cdrom
             nom logique: /dev/cdrw
             nom logique: /dev/dvd
             nom logique: /dev/dvdrw
             nom logique: /dev/sr0
             version: TN01
             fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
     *-scsi:1
          identifiant matériel: 2
          nom logique: scsi3
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: SAMSUNG HD103SJ
             identifiant matériel: 0.0.0
             information bus: scsi@3:0.0.0
             nom logique: /dev/sda
             version: 00E4
             numéro de série: S246JDWSC49382
             taille: 931GiB (1TB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=a5f72933
           *-volume:0
                description: Windows NTFS volume
                identifiant matériel: 1
                information bus: scsi@3:0.0.0,1
                nom logique: /dev/sda1
                version: 3.1
                numéro de série: 322924aa-868f-5342-b928-881ead05738a
                taille: 233GiB
                capacité: 233GiB
                fonctionnalités: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2016-11-16 18:00:55 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
           *-volume:1
                description: Volume EXT4
                fabriquant: Linux
                identifiant matériel: 2
                information bus: scsi@3:0.0.0,2
                nom logique: /dev/sda2
                nom logique: /
                version: 1.0
                numéro de série: fa2c86c3-3ad4-4584-9156-cf0ce3a8e2a3
                taille: 139GiB
                capacité: 139GiB
                fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2018-01-28 16:00:45 filesystem=ext4 lastmountpoint=/ modified=2018-02-01 10:24:29 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2018-02-01 10:24:34 state=mounted
           *-volume:2
                description: Volume EXT4
                fabriquant: Linux
                identifiant matériel: 3
                information bus: scsi@3:0.0.0,3
                nom logique: /dev/sda3
                nom logique: /home
                version: 1.0
                numéro de série: 28dd97ff-0b45-4b29-b998-0c5ae4d68233
                taille: 556GiB
                capacité: 556GiB
                fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2018-01-28 16:00:47 filesystem=ext4 lastmountpoint=/home modified=2018-02-01 10:24:37 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2018-02-01 10:24:37 state=mounted
           *-volume:3
                description: Linux swap volume
                identifiant matériel: 4
                information bus: scsi@3:0.0.0,4
                nom logique: /dev/sda4
                version: 1
                numéro de série: a98eef87-839f-472b-b414-b79b2b6e4b3e
                taille: 1907MiB
                capacité: 1907MiB
                fonctionnalités: primary nofs swap initialized
                configuration: filesystem=swap pagesize=4096

Sinon en ce qui concerne le x64 bits, je sais que c'est la version que j'ai installée, c'est bien celle qui convient a mon ordi. J'ai toujours installé les choses en x64.
C'est bon j'ai tout mis à jour.

cat /sys/devices/system/clocksource/clocksource0/available_clocksource
hpet acpi_pm

cat /sys/devices/system/clocksource/clocksource0/current_clocksource
hpet

Et sinon j'ai remarqué un truc étrange en cherchant pour le mode sans échec: Quand j'ouvre le menu avancé, sur le grub, c'est comme si j'avais deux ubuntu.
Il y a 3 lignes commençant par

Ubuntu, with Linux 4.13.0-32-generic

et 3 autres commençant par

Ubuntu, with Linux 4.10.0-28-generic

. Mais vu que je n'y connais rien c'est peut-être normal.

xubu1957 · Le 01/02/2018, à 23:36

Fournis le noyau actif :

uname -a

et les noyaux présents :

dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)" | sort -k3 | tr -s " " | cut -d" " -s -f1,2,3 | column -s" " -t

Wusha · Le 02/02/2018, à 00:06

uname -a
Linux ana-comp 4.13.0-32-generic #35~16.04.1-Ubuntu SMP Thu Jan 25 10:13:43 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)" | sort -k3 | tr -s " " | cut -d" " -s -f1,2,3 | column -s" " -t
ii  linux-headers-4.10.0-28              4.10.0-28.32~16.04.2
ii  linux-image-extra-4.10.0-28-generic  4.10.0-28.32~16.04.2
ii  linux-headers-4.10.0-28-generic      4.10.0-28.32~16.04.2
ii  linux-image-4.10.0-28-generic        4.10.0-28.32~16.04.2
ii  linux-headers-4.13.0-32              4.13.0-32.35~16.04.1
ii  linux-image-extra-4.13.0-32-generic  4.13.0-32.35~16.04.1
ii  linux-headers-4.13.0-32-generic      4.13.0-32.35~16.04.1
ii  linux-image-4.13.0-32-generic        4.13.0-32.35~16.04.1
ii  linux-generic-hwe-16.04              4.13.0.32.52
ii  linux-headers-generic-hwe-16.04      4.13.0.32.52
ii  linux-image-generic-hwe-16.04        4.13.0.32.52

xubu1957 · Le 02/02/2018, à 00:14

Il faut attendre l'avis de ?? ou de moko138, pour une utilisation de la commande :

sudo apt-get autoremove --purge

> kernel#via_autoremove

car tu n'as que 2 noyaux présents.

Rajout à titre d'information :

extrait § 1.1 a écrit :

Une fois l'installation terminée et l'ordinateur redémarré, restez prudent en utilisant les options de démarrage du Grub. L'utilisation d'un ancien noyau peut provoquer l'impossibilité de charger l'interface graphique car le nouveau serveur graphique peut ne pas être compatible avec les anciens noyaux encore présents.
Pour éviter tout risque erreur, il est préférable alors de supprimer tous les anciens noyaux.

> passer_a_la_derniere_etape_de_version_lts

Dernière modification par xubu1957 (Le 02/02/2018, à 00:23)

?? · Le 02/02/2018, à 00:27

Bonsoir.
Aucun risque avec cette commande. Elle va constater qu'il n'y a que deux noyaux. Elle se supprimera donc rien du tout.... il faut attendre qu'un autre noyau s'installe pour qu'elle supprime le noyau 4.10

Cependant, dans la recherche internet, on va pouvoir cibler plus fin.

Mais quelle idée de mettre une telle version sur un matériel ancien.
Si on ne trouve rien dans les 48 heures, je te conseillerais de te préparer à installer la version 16.04.1. http://old-releases.ubuntu.com/releases/xenial/
sans savoir si cela est la solution.

Dernière modification par ?? (Le 02/02/2018, à 00:32)

Wusha · Le 02/02/2018, à 00:44

Ok je vous laisse le temps regarder, pour cibler ou je tente?

Sinon j'ai mis la version que j'ai trouvé via un lien, je ne pensais pas qu'il y aurait a ce point des incompatibilités entre une version et le matériel... D'autant que mon ordi a effectivement quelques années, mais il a toujours fait tourner tout ce que je voulais dessus, donc je ne le considérais pas vraiment comme du matériel ancien

Dernière modification par Wusha (Le 02/02/2018, à 00:46)

?? · Le 02/02/2018, à 14:04

Bonjour
Très mauvaise nouvelle ce matin....
Le logiciel m'a proposé une mise àjour. J'ai accepté et depuis la nouvelle version de firefox crashe systématiquement aussitôt que je sollicite google.
https://www.google.fr/search?as_q=ubunt … as_rights=
Ainsi je ne peux pas avoir de réponse.....

Dernière modification par ?? (Le 02/02/2018, à 14:06)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 30/01/2018, à 16:55

Re : Boot d'Ubuntu anormalement long

#27 Le 30/01/2018, à 17:40

Re : Boot d'Ubuntu anormalement long

#28 Le 30/01/2018, à 18:03

Re : Boot d'Ubuntu anormalement long

#29 Le 30/01/2018, à 23:15

Re : Boot d'Ubuntu anormalement long

#30 Le 31/01/2018, à 14:19

Re : Boot d'Ubuntu anormalement long

#31 Le 31/01/2018, à 15:18

Re : Boot d'Ubuntu anormalement long

#32 Le 31/01/2018, à 15:30

Re : Boot d'Ubuntu anormalement long

#33 Le 01/02/2018, à 02:13

Re : Boot d'Ubuntu anormalement long

#34 Le 01/02/2018, à 07:43

Re : Boot d'Ubuntu anormalement long

#35 Le 01/02/2018, à 07:52

Re : Boot d'Ubuntu anormalement long

#36 Le 01/02/2018, à 08:17

Re : Boot d'Ubuntu anormalement long

#37 Le 01/02/2018, à 08:26

Re : Boot d'Ubuntu anormalement long

#38 Le 01/02/2018, à 08:33

Re : Boot d'Ubuntu anormalement long

#39 Le 01/02/2018, à 08:35

Re : Boot d'Ubuntu anormalement long

#40 Le 01/02/2018, à 08:40

Re : Boot d'Ubuntu anormalement long

#41 Le 01/02/2018, à 15:59

Re : Boot d'Ubuntu anormalement long

#42 Le 01/02/2018, à 16:23

Re : Boot d'Ubuntu anormalement long

#43 Le 01/02/2018, à 16:51

Re : Boot d'Ubuntu anormalement long

#44 Le 01/02/2018, à 23:34

Re : Boot d'Ubuntu anormalement long

#45 Le 01/02/2018, à 23:36

Re : Boot d'Ubuntu anormalement long

#46 Le 02/02/2018, à 00:06

Re : Boot d'Ubuntu anormalement long

#47 Le 02/02/2018, à 00:14

Re : Boot d'Ubuntu anormalement long

#48 Le 02/02/2018, à 00:27

Re : Boot d'Ubuntu anormalement long

#49 Le 02/02/2018, à 00:44

Re : Boot d'Ubuntu anormalement long

#50 Le 02/02/2018, à 14:04

Re : Boot d'Ubuntu anormalement long

Pied de page des forums