Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 03/03/2021, à 19:42

Nast

Initramfs lors du démarrage

Bonjour,

Après avoir éteint mon ordinateur, je le rallume et il m affiche se message :
no init found. Try passiing init=bootrag
Busybox blabla, enter help for a list of command

J'ai essayé "exit" mais ça le bloque j'ai cru comprendre que le problème viens de sda2 du coups j ai essayé fsck/dev/sda2 puis de répondre yes. Mais rien n y change.
Je ne dispose pas de cd ou de clef avec linux. Y a t il une solution ?

Hors ligne

#2 Le 04/03/2021, à 08:50

malbo

Re : Initramfs lors du démarrage

Nast a écrit :

Je ne dispose pas de cd ou de clef avec linux. Y a t il une solution ?

Oui, te débrouiller pour fabriquer une LiveUSB Ubuntu 20.04.2.0 depuis un autre ordi. Pour ce faire, il y a plusieurs solutions présentées dans la doc Live USB.
Puis faire un Boot-info depuis une session live (*) de Ubuntu et donner l'URL de ce Boot-info dans ta réponse.

(*) ton ordi malade démarré sur la LiveUSB, choix "Essayer Ubuntu"

Dernière modification par malbo (Le 04/03/2021, à 08:51)

Hors ligne

#3 Le 06/03/2021, à 08:59

zebone

Re : Initramfs lors du démarrage

bonjour à tous
idem chez moi
je ferme  mon ordinateur avant hier soir  qui marchait parfaitement
ce matin bloqué complet  au demarrage  et arrive seul  sur ( initramfs )_
que s'est il passé ?
que faire ?
comment  lancer fsck manuellement  et avec quelles commandes?
zebone

Hors ligne

#4 Le 06/03/2021, à 09:13

Rafbor

Re : Initramfs lors du démarrage

Salut, démarrer sur un LiveUSB comme proposé par @malbo, puis, si c'est bien sda2 qui pose problème

geole a écrit :

Bonjour

sudo fsck -y /dev/sda2

vu ici: https://forum.ubuntu-fr.org/viewtopic.p … #p22415539

En mode graphique ça fonctionne aussi, après avoir booté sur le LiveUSB, lancer GParted puis demander la vérification de la partition système du PC.

Xubuntu 22.04 - Mes projets sur Github

Hors ligne

#5 Le 07/03/2021, à 10:53

zebone

Re : Initramfs lors du démarrage

Bonjour à tous
merci merci merci
une image iso, un demarrage sur  essayer  et  un sudo....
et  apres  avoir  repondu yes à tous les  pb qu'il trouve ( sans rien comprendre)...  c'est reparti pour un tour .
ouf !
j'ai reflechi et en fait  dans la journée precedante  à ce pepin il y a eu  des coupures de courants successives et je n'ai pas  d'onduleur .....
encore merci les sauveurs
zebone

Hors ligne

#6 Le 08/03/2021, à 19:18

Nast

Re : Initramfs lors du démarrage

Bonjour de nouveaux, excusez moi j'ai mis quelque temps pour me faire une clefs. Mais il faut croire que je m'y suis mal pris car le boot menu ne la voit pas. J essaie de la refaire demain, et vous tiens au courant.

Bon ! enfin j'ai l'url : https://paste.ubuntu.com/p/SKwDZTQZdx/

Dernière modification par Nast (Le 09/03/2021, à 19:20)

Hors ligne

#7 Le 09/03/2021, à 19:22

Nast

Re : Initramfs lors du démarrage

Désolé pour le temps d'attente, j’espère qu'il peut encore être tiré d'affaire, ça va faire la 4eme fois que je le réanime si cette fois ça marche.

Je doit bien faire sudo fsck -y /dev/sda2  du coups ?
Ma question peut paraître bête au vu du rapport d'erreur en fin du rapport général mais bon, ont sait jamais.

Dernière modification par Nast (Le 09/03/2021, à 19:38)

Hors ligne

#8 Le 09/03/2021, à 20:13

lucmars

Re : Initramfs lors du démarrage

Le boot-info

boot-info-4ppa125                                              [20210309_1814]

============================== Boot Info Summary ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /efi/BOOT/fbx64.efi /efi/BOOT/mmx64.efi 
                       /efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi 
                       /efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/sda2: wrong fs type, bad option, bad superblock on /dev/sda2, missing codepage or helper program, or other error.

sdc: ___________________________________________________________________________

    File system:       iso9660
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/FD/sdc: /dev/sdc déjà monté ou point de montage actif.


================================ 1 OS detected =================================

OS#1:   Ubuntu 20.04.2 LTS on sda2

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
Live-session OS is Ubuntu 64-bit (Ubuntu 20.04.2 LTS, focal, x86_64)


===================================== UEFI =====================================

BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
No EFI in dmseg.
SecureBoot disabled.

efibootmgr -v
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0002,0003,2001,2003,2002
Boot0000* EFI Network 0 for IPv4 (7C-05-07-D9-84-38) 	PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(7c0507d98438,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot0001* EFI Network 0 for IPv6 (7C-05-07-D9-84-38) 	PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(7c0507d98438,0)/IPv6([::]:<->[::]:,0,0)RC
Boot0002* ubuntu	HD(1,GPT,6ff925cd-53bc-4ab6-9ee9-ac2c9c5e30d8,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
Boot0003* Ubuntu	HD(1,GPT,6ff925cd-53bc-4ab6-9ee9-ac2c9c5e30d8,0x800,0x100000)/File(\EFI\ubuntu\grubx64.efi)RC
Boot0004* EFI USB Device (VendorCoProductCode)	PciRoot(0x0)/Pci(0x1a,0x0)/USB(0,0)/USB(1,0)/HD(1,MBR,0x38b1c112,0x6a4,0x1f40)RC
Boot000A* EFI Network 0 for IPv4 (7C-05-07-D9-84-38) 	PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(7c0507d98438,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot000B* EFI Network 0 for IPv6 (7C-05-07-D9-84-38) 	PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(7c0507d98438,0)/IPv6([::]:<->[::]:,0,0)RC
Boot000C* EFI Network 0 for IPv4 (7C-05-07-D9-84-38) 	PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(7c0507d98438,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot000D* EFI Network 0 for IPv6 (7C-05-07-D9-84-38) 	PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(7c0507d98438,0)/IPv6([::]:<->[::]:,0,0)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

2895d47544fd587b26c7e29be1295c27   sda1/BOOT/fbx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84   sda1/BOOT/mmx64.efi
957dc7e5f72c1d7393bf7850df5db2db   sda1/ubuntu/grubx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84   sda1/ubuntu/mmx64.efi
78415fb8fb9b909f8029858113f1335f   sda1/ubuntu/shimx64.efi
78415fb8fb9b909f8029858113f1335f   sda1/BOOT/BOOTX64.efi


============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: is-GPT,	no-BIOSboot,	has---ESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda2	: is-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios

Partitions info (2/3): _________________________________________________________

sda1	: is---ESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda1	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda2	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda

fdisk -l (filtered): ___________________________________________________________

Disk sda: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: F0C00150-8E23-4A81-8F59-316AA5711D38
        Start        End    Sectors  Size Type
sda1     2048    1050623    1048576  512M EFI System
sda2  1050624 1953523711 1952473088  931G Linux filesystem
Disk sdc: 3.77 GiB, 4026531840 bytes, 7864320 sectors
Disk identifier: 0x38b1c112
      Boot   Start     End Sectors  Size Id Type
sdc1  *          0 5619583 5619584  2.7G  0 Empty
sdc2          1700    9699    8000  3.9M ef EFI (FAT-12/16/32)
sdc3       5619712 7864319 2244608  1.1G 83 Linux

parted -lm (filtered): _________________________________________________________

sda:1000GB:scsi:512:4096:gpt:ATA ST1000LM024 HN-M:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:1000GB:1000GB:ext4::;
sdc:4027MB:scsi:512:512:unknown:VendorCo ProductCode:;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL                      PARTLABEL
sda                                                                                                                  
├─sda1 vfat     E45F-2FB2                            6ff925cd-53bc-4ab6-9ee9-ac2c9c5e30d8                            EFI System Partition
└─sda2 ext4     ef3a5cdd-d179-4a1d-a686-9c98fcfc0772 419ada59-8cab-4ea4-8707-f827f2f438bd                            
sdc    iso9660  2021-02-09-19-06-26-00                                                    Ubuntu 20.04.2.0 LTS amd64 
├─sdc1 iso9660  2021-02-09-19-06-26-00               38b1c112-01                          Ubuntu 20.04.2.0 LTS amd64 
├─sdc2 vfat     54C5-9C6C                            38b1c112-02                                                     
└─sdc3 ext4     cb05f42b-9db0-4a8a-bd05-f535cc05076a 38b1c112-03                          writable                   

df (filtered): _________________________________________________________________

                                                          Avail Use% Mounted on
disk/by-label/writable[/install-logs-2021-03-09.1/crash] 967.7M   1% /var/crash
disk/by-label/writable[/install-logs-2021-03-09.1/log]   967.7M   1% /var/log
sda1                                                     503.2M   2% /mnt/boot-sav/sda1
sdc1                                                          0 100% /cdrom

Mount options: __________________________________________________________________

disk/by-label/writable[/install-logs-2021-03-09.1/crash] rw,relatime
disk/by-label/writable[/install-logs-2021-03-09.1/log]   rw,relatime
sda1                                                     rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sdc1                                                     ro,noatime,nojoliet,check=s,map=n,blocksize=2048

===================== sda1/efi/ubuntu/grub.cfg (filtered) ======================

search.fs_uuid ef3a5cdd-d179-4a1d-a686-9c98fcfc0772 root hd0,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on sdc

00000000  45 52 08 00 00 00 90 90  00 00 00 00 00 00 00 00  |ER..............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000020  33 ed fa 8e d5 bc 00 7c  fb fc 66 31 db 66 31 c9  |3......|..f1.f1.|
00000030  66 53 66 51 06 57 8e dd  8e c5 52 be 00 7c bf 00  |fSfQ.W....R..|..|
00000040  06 b9 00 01 f3 a5 ea 4b  06 00 00 52 b4 41 bb aa  |.......K...R.A..|
00000050  55 31 c9 30 f6 f9 cd 13  72 16 81 fb 55 aa 75 10  |U1.0....r...U.u.|
00000060  83 e1 01 74 0b 66 c7 06  f3 06 b4 42 eb 15 eb 02  |...t.f.....B....|
00000070  31 c9 5a 51 b4 08 cd 13  5b 0f b6 c6 40 50 83 e1  |1.ZQ....[...@P..|
00000080  3f 51 f7 e1 53 52 50 bb  00 7c b9 04 00 66 a1 b0  |?Q..SRP..|...f..|
00000090  07 e8 44 00 0f 82 80 00  66 40 80 c7 02 e2 f2 66  |..D.....f@.....f|
000000a0  81 3e 40 7c fb c0 78 70  75 09 fa bc ec 7b ea 44  |.>@|..xpu....{.D|
000000b0  7c 00 00 e8 83 00 69 73  6f 6c 69 6e 75 78 2e 62  ||.....isolinux.b|
000000c0  69 6e 20 6d 69 73 73 69  6e 67 20 6f 72 20 63 6f  |in missing or co|
000000d0  72 72 75 70 74 2e 0d 0a  66 60 66 31 d2 66 03 06  |rrupt...f`f1.f..|
000000e0  f8 7b 66 13 16 fc 7b 66  52 66 50 06 53 6a 01 6a  |.{f...{fRfP.Sj.j|
000000f0  10 89 e6 66 f7 36 e8 7b  c0 e4 06 88 e1 88 c5 92  |...f.6.{........|
00000100  f6 36 ee 7b 88 c6 08 e1  41 b8 01 02 8a 16 f2 7b  |.6.{....A......{|
00000110  cd 13 8d 64 10 66 61 c3  e8 1e 00 4f 70 65 72 61  |...d.fa....Opera|
00000120  74 69 6e 67 20 73 79 73  74 65 6d 20 6c 6f 61 64  |ting system load|
00000130  20 65 72 72 6f 72 2e 0d  0a 5e ac b4 0e 8a 3e 62  | error...^....>b|
00000140  04 b3 07 cd 10 3c 0a 75  f1 cd 18 f4 eb fd 00 00  |.....<.u........|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001b0  80 b6 05 00 00 00 00 00  12 c1 b1 38 00 00 80 00  |...........8....|
000001c0  01 00 00 ab e0 fc 00 00  00 00 80 bf 55 00 00 fe  |............U...|
000001d0  ff ff ef fe ff ff a4 06  00 00 40 1f 00 00 00 ce  |..........@.....|
000001e0  72 5d 83 87 5e e9 00 c0  55 00 00 40 22 00 00 00  |r]..^...U..@"...|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


========= Devices which don't seem to have a corresponding hard drive ==========

sdb 

=============================== StdErr Messages ================================

File descriptor 63 (pipe:[92614]) leaked on lvs invocation. Parent PID 26649: /bin/bash
  /dev/sdb: open failed: Aucun support trouvé
  /dev/sdb: open failed: Aucun support trouvé

Error code 32
mount -r /dev/sda2 /mnt/boot-sav/sda2

mount -r /dev/sda2 : Error code 32
Error code 32
mount -r /dev/sda2 /mnt/boot-sav/sda2

mount -r /dev/sda2 : Error code 32
Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would not act on the boot.

Gaulois Matter !

Hors ligne

#9 Le 09/03/2021, à 20:19

lucmars

Re : Initramfs lors du démarrage

bootinfo a écrit :

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:
    Mounting failed:   mount: /mnt/BootInfo/sda2: wrong fs type, bad option, bad superblock on /dev/sda2, missing codepage or helper program, or other error.

bootinfo a écrit :

Error code 32
mount -r /dev/sda2 /mnt/boot-sav/sda2

mount -r /dev/sda2 : Error code 32
Error code 32
mount -r /dev/sda2 /mnt/boot-sav/sda2

mount -r /dev/sda2 : Error code 32
Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would not act on the boot.

Sur que boot-repair n'y peut rien car ton disque semble etre mal en point : audites le depuis ta clef/dvd buntu avec smartmontools (voir doc) et retournes son audite ici entre les balises codes (<>)

Gaulois Matter !

Hors ligne

#10 Le 09/03/2021, à 20:41

Nast

Re : Initramfs lors du démarrage

ubuntu@ubuntu:~$  sudo smartctl -s on -a /dev/sda2
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-43-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S2SMJ9AD550640
LU WWN Device Id: 5 0004cf 20a600680
Firmware Version: 2AR20002
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Mar  9 19:35:54 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         (12780) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 213) minutes.
SCT capabilities:            (0x003f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       11291
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   089   086   025    Pre-fail  Always       -       3453
  4 Start_Stop_Count        0x0032   093   093   000    Old_age   Always       -       7075
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       27634
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       182
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       6696
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       1915
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   045   000    Old_age   Always       -       27 (Min/Max 4/56)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       33
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       5848
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       182
225 Load_Cycle_Count        0x0032   040   040   000    Old_age   Always       -       607332

SMART Error Log Version: 1
ATA Error Count: 257 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 257 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 a0 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 98 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 90 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 88 0b 10 e0 00      00:00:01.891  READ DMA

Error 256 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.884  READ DMA
  27 00 00 00 00 00 e0 00      00:00:01.884  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:01.884  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:00:01.884  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:01.884  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 255 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 a0 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 98 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 90 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 88 0b 10 e0 00      00:00:01.880  READ DMA

Error 254 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.857  READ DMA
  27 00 00 00 00 00 e0 00      00:00:01.857  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:01.857  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:00:01.857  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:01.857  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 253 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 a0 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 98 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 90 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 88 0b 10 e0 00      00:00:01.854  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Vendor (0x50)       Completed without error       00%     24586         -
# 2  Short offline       Completed: read failure       90%     24586         1372730288
# 3  Vendor (0x50)       Completed without error       00%     24141         -
# 4  Short offline       Completed: read failure       90%     24141         865199096
# 5  Vendor (0x50)       Completed without error       00%     23630         -
# 6  Short offline       Completed: read failure       90%     23630         865199096
# 7  Vendor (0x50)       Completed without error       00%     23251         -
# 8  Short offline       Aborted by host               10%     23251         -
# 9  Vendor (0x50)       Completed without error       00%     22911         -
#10  Short offline       Completed: read failure       90%     22911         1372730288
#11  Vendor (0x50)       Completed without error       00%     22907         -
#12  Short offline       Completed: read failure       90%     22907         1372730288
#13  Vendor (0x50)       Completed without error       00%     22719         -
#14  Short offline       Completed: read failure       90%     22719         1372730288
#15  Vendor (0x50)       Completed without error       00%     22389         -
#16  Short offline       Completed: read failure       90%     22389         1372730288
#17  Vendor (0x50)       Completed without error       00%     22386         -
#18  Short offline       Completed: read failure       90%     22386         1372730288
#19  Vendor (0x50)       Completed without error       00%     22123         -
#20  Short offline       Completed: read failure       70%     22123         1372730288
#21  Vendor (0x50)       Completed without error       00%     21934         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Dernière modification par Nast (Le 09/03/2021, à 20:44)

Hors ligne

#11 Le 09/03/2021, à 20:42

cqfd93

Re : Initramfs lors du démarrage

Modération

Bonjour,

Pour ajouter toi-même les balises code à ton message #10 :

  • Cliquer sur le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message
    1471986854.png

− cqfd93 −

En ligne

#12 Le 09/03/2021, à 20:48

Nast

Re : Initramfs lors du démarrage

== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S2SMJ9AD550640
LU WWN Device Id: 5 0004cf 20a600680
Firmware Version: 2AR20002
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Mar  9 19:47:02 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(12780) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 213) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       11291
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   089   086   025    Pre-fail  Always       -       3453
  4 Start_Stop_Count        0x0032   093   093   000    Old_age   Always       -       7075
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       27634
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       182
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       6696
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       1915
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   045   000    Old_age   Always       -       28 (Min/Max 4/56)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       33
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       5848
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       182
225 Load_Cycle_Count        0x0032   040   040   000    Old_age   Always       -       607332

SMART Error Log Version: 1
ATA Error Count: 257 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 257 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 a0 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 98 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 90 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 88 0b 10 e0 00      00:00:01.891  READ DMA

Error 256 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.884  READ DMA
  27 00 00 00 00 00 e0 00      00:00:01.884  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:01.884  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:00:01.884  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:01.884  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 255 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 a0 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 98 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 90 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 88 0b 10 e0 00      00:00:01.880  READ DMA

Error 254 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.857  READ DMA
  27 00 00 00 00 00 e0 00      00:00:01.857  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:01.857  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:00:01.857  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:01.857  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 253 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 a0 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 98 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 90 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 88 0b 10 e0 00      00:00:01.854  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Vendor (0x50)       Completed without error       00%     24586         -
# 2  Short offline       Completed: read failure       90%     24586         1372730288
# 3  Vendor (0x50)       Completed without error       00%     24141         -
# 4  Short offline       Completed: read failure       90%     24141         865199096
# 5  Vendor (0x50)       Completed without error       00%     23630         -
# 6  Short offline       Completed: read failure       90%     23630         865199096
# 7  Vendor (0x50)       Completed without error       00%     23251         -
# 8  Short offline       Aborted by host               10%     23251         -
# 9  Vendor (0x50)       Completed without error       00%     22911         -
#10  Short offline       Completed: read failure       90%     22911         1372730288
#11  Vendor (0x50)       Completed without error       00%     22907         -
#12  Short offline       Completed: read failure       90%     22907         1372730288
#13  Vendor (0x50)       Completed without error       00%     22719         -
#14  Short offline       Completed: read failure       90%     22719         1372730288
#15  Vendor (0x50)       Completed without error       00%     22389         -
#16  Short offline       Completed: read failure       90%     22389         1372730288
#17  Vendor (0x50)       Completed without error       00%     22386         -
#18  Short offline       Completed: read failure       90%     22386         1372730288
#19  Vendor (0x50)       Completed without error       00%     22123         -
#20  Short offline       Completed: read failure       70%     22123         1372730288
#21  Vendor (0x50)       Completed without error       00%     21934         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#13 Le 09/03/2021, à 20:54

Nast

Re : Initramfs lors du démarrage

C'est ce que vous m'avez demandé j’espère, il propose beaucoup de chose sur le doc smartmontool

Hors ligne

#14 Le 09/03/2021, à 21:19

Nast

Re : Initramfs lors du démarrage

A moins que se soit ça ....

ubuntu@ubuntu:~$ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-43-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S2SMJ9AD550640
LU WWN Device Id: 5 0004cf 20a600680
Firmware Version: 2AR20002
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Mar  9 20:18:09 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(12780) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 213) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       11291
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   089   086   025    Pre-fail  Always       -       3453
  4 Start_Stop_Count        0x0032   093   093   000    Old_age   Always       -       7075
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       27634
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       182
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       6696
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       1915
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   045   000    Old_age   Always       -       27 (Min/Max 4/56)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       33
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       5848
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       182
225 Load_Cycle_Count        0x0032   040   040   000    Old_age   Always       -       607332

SMART Error Log Version: 1
ATA Error Count: 257 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 257 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 a0 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 98 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 90 0b 10 e0 00      00:00:01.891  READ DMA
  c8 00 08 88 0b 10 e0 00      00:00:01.891  READ DMA

Error 256 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.884  READ DMA
  27 00 00 00 00 00 e0 00      00:00:01.884  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:01.884  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:00:01.884  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:01.884  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 255 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 a0 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 98 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 90 0b 10 e0 00      00:00:01.880  READ DMA
  c8 00 08 88 0b 10 e0 00      00:00:01.880  READ DMA

Error 254 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.857  READ DMA
  27 00 00 00 00 00 e0 00      00:00:01.857  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:01.857  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:00:01.857  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:00:01.857  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 253 occurred at disk power-on lifetime: 27632 hours (1151 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a8 0b 10 e0  Error: UNC 8 sectors at LBA = 0x00100ba8 = 1051560

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a8 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 a0 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 98 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 90 0b 10 e0 00      00:00:01.854  READ DMA
  c8 00 08 88 0b 10 e0 00      00:00:01.854  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Vendor (0x50)       Completed without error       00%     24586         -
# 2  Short offline       Completed: read failure       90%     24586         1372730288
# 3  Vendor (0x50)       Completed without error       00%     24141         -
# 4  Short offline       Completed: read failure       90%     24141         865199096
# 5  Vendor (0x50)       Completed without error       00%     23630         -
# 6  Short offline       Completed: read failure       90%     23630         865199096
# 7  Vendor (0x50)       Completed without error       00%     23251         -
# 8  Short offline       Aborted by host               10%     23251         -
# 9  Vendor (0x50)       Completed without error       00%     22911         -
#10  Short offline       Completed: read failure       90%     22911         1372730288
#11  Vendor (0x50)       Completed without error       00%     22907         -
#12  Short offline       Completed: read failure       90%     22907         1372730288
#13  Vendor (0x50)       Completed without error       00%     22719         -
#14  Short offline       Completed: read failure       90%     22719         1372730288
#15  Vendor (0x50)       Completed without error       00%     22389         -
#16  Short offline       Completed: read failure       90%     22389         1372730288
#17  Vendor (0x50)       Completed without error       00%     22386         -
#18  Short offline       Completed: read failure       90%     22386         1372730288
#19  Vendor (0x50)       Completed without error       00%     22123         -
#20  Short offline       Completed: read failure       70%     22123         1372730288
#21  Vendor (0x50)       Completed without error       00%     21934         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Je suis pommé

Hors ligne

#15 Le 10/03/2021, à 19:01

Nast

Re : Initramfs lors du démarrage

Re, du coups mon pc est mort ?

Hors ligne

#16 Le 10/03/2021, à 19:28

lucmars

Re : Initramfs lors du démarrage

smart a écrit :

  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       33

Id 197 t'as 33 secteurs en attente d'étre réalloués en id5 qui est à zéro.

Par ailleurs t'as plusieurs erreurs dans le meme temps, mais bon. Semble que initramfs, pièce clef pour lancer l'OS, soit à l'endroit des 33 secteurs non-réalloués.

Si fsck n'y peut rien : on touche l'os et en ce cas fsck n'arrange rien. Ton PC n'est pas mort seul son DD ne serait plus de confiance.

Y a p'tete meillieur avis que moi ceci-dit.

Gaulois Matter !

Hors ligne

#17 Le 10/03/2021, à 19:56

Nast

Re : Initramfs lors du démarrage

D'accord, mais y a t il un moyen de le retaper tu penses ?

Hors ligne

#18 Le 10/03/2021, à 20:00

Rafbor

Re : Initramfs lors du démarrage

@Nast: tu n'as pas lancé la commande fsck citée en #4 ?

Xubuntu 22.04 - Mes projets sur Github

Hors ligne

#19 Le 10/03/2021, à 20:22

Nast

Re : Initramfs lors du démarrage

Je viens d'essayer.

resultat :

ubuntu@ubuntu:~$ sudo fsck -y /dev/sda2
fsck from util-linux 2.34
e2fsck 1.45.5 (07-Jan-2020)
fsck.ext4: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda2
Could this be a zero-length partition?

Je fait yes ? Ou y

Dernière modification par Nast (Le 10/03/2021, à 20:29)

Hors ligne

Pages : 1