Ubuntu-fr

Veam

NAS Samba - problème débit montant en ethernet

Bonjour à tous,

J'ai un petit souci, ne concernant pas directement ubuntu mais son grand frère debian, connaissant la réctivité du forum ubuntu-fr.org, je me permets de vous en faire part.

D'un côté un NAS (Linux 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux) avec un partage samba (samba 2:3.6.6-3).
[ Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) ]

De l'autre un client dual-boot Windows 7 et Ubuntu Lucid (backtrack 5r3, avec un kernel 3.4)
[ Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20) ]

Et une passerelle Freebox v6.

Lorsque le post client est connecté en wifi, les débits montant et descendant sont aux alentours de 3-4 Mo/s.
Mais, lorsque le poste client est connecté en ethernet, le débit descendant est de ~60Mo/s et le débit montant de 25 Ko/s !!!

Je suis quelque peu désappointé d'être l'heureux possesseur d'un upload plus faible en LAN qu'en WAN !!!

Pourriez vous m'aider à résoudre ce problème ?

Je vous fais parvenir le résultat de quelques commandes. Et merci d'avance !

* iperf *

 - Côté client -

iperf -c 192.168.1.253 -r
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 64.0 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.1.253, TCP port 5001
TCP window size: 64.0 KByte (default)
------------------------------------------------------------
[  4] local 192.168.1.44 port 56596 connected with 192.168.1.253 port 5001
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-19.6 sec   512 KBytes   214 Kbits/sec
[  4] local 192.168.1.44 port 5001 connected with 192.168.1.253 port 30502
[  4]  0.0-10.0 sec   691 MBytes   578 Mbits/sec

- Côté serveur -

iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[  4] local 192.168.1.253 port 5001 connected with 192.168.1.44 port 56596
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-22.0 sec   512 KBytes   191 Kbits/sec
------------------------------------------------------------
Client connecting to 192.168.1.44, TCP port 5001
TCP window size:  127 KByte (default)
------------------------------------------------------------
[  4] local 192.168.1.253 port 30502 connected with 192.168.1.44 port 5001
[  4]  0.0-10.0 sec   691 MBytes   579 Mbits/sec

* ifconfig *

eth0   Link encap:Ethernet  HWaddr --------------------------------
          inet adr:192.168.1.253  Bcast:192.168.1.255  Masque:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:527141 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1339449 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:37432542 (35.6 MiB)  TX bytes:1971401164 (1.8 GiB)
          Interruption:43 Adresse de base:0xc000

* ethtool eth0*

Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: Symmetric Receive-only
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: Unknown
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000033 (51)
                               drv probe ifdown ifup
        Link detected: yes

* lsmod -vv *

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
        Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 43
        Region 0: I/O ports at c800 [size=256]
        Region 2: Memory at fafff000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at faff8000 (64-bit, prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0f00c  Data: 4179
        Capabilities: [70] Express (v2) Endpoint, MSI 01
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [d0] Vital Product Data
                Unknown small resource type 00, will not decode more.
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number -------------------------------------
        Kernel driver in use: r8168

* cat /etc/samba/smb.conf *

#======================= Global Settings =======================
[global]

## Browsing/Identification ###
workgroup = WORKGROUP
server string = Samba server (%h)
netbios name = ------------
dns proxy = no

#### Networking ####
hosts allow = 192.168.1.0/255.255.255.0 127.0.0.1
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=65536 SO_SNDBUF=65536

### Access rights ###
create mask = 0660
directory mask = 0770

#### Debugging/Accounting ####
log file = /var/log/samba/log.%m
max log size = 1000
syslog = 0
panic action = /usr/share/samba/panic-action %d

####### Authentication #######
security = SHARE
guest account = public

############ Misc ############
aio read size = 1
aio write size =1
write raw = no
read raw = no

[NAS]
comment = ------------------
path = -------------------------
hide files = /lost+found/.recyclebin*/*.bak/
browseable = yes
read only = no
guest ok = yes
public = yes
vfs object = recycle
        recycle:repository = .recyclebin
        recycle:keeptree = Yes
        recycle:touch = Yes
        recycle:versions = Yes
        recycle:maxsixe = 0
        recycle:exclude = *.tmp
        recycle:exclude_dir = /tmp

Dernière modification par Veam (Le 24/11/2012, à 15:01)

Veam

Re : NAS Samba - problème débit montant en ethernet

personne ???

une idée ?