#1 Le 09/03/2019, à 16:57
- lorismazza
[résolu] boot plus lent après installation 18.04
Bonjour,
Après avoir eu de gros problèmes à l'installation d'Ubuntu 18.04 (reboot en boucle, écran figé, ...) et avoir pu finalement l'installer, mon portable Dell G3 boote énormément plus lentement qu'avant. Est-ce qu'il y aurait une solution pour améliorer le boot? Je précise qu'Ubuntu se lance rapidement après avoir entré mon mot de passe à la fenêtre de connexion et que le reste fonctionne bien. Comme l'installation ne s'est pas bien faite, j'ai dû trifouiller dans le BIOS et je pense avoir modifié des choses que je n'aurais pas dû toucher.
Merci d'avance pour votre aide.
Voici le retour de lshw -short
Chemin matériel Périphérique Classe Description
============================================================
system G3 3779 (0870)
/0 bus 0Y13VR
/0/0 memory 64KiB BIOS
/0/42 memory 8GiB Mémoire Système
/0/42/0 memory 4GiB SODIMM DDR4 Synchrone 2667
/0/42/1 memory 4GiB SODIMM DDR4 Synchrone 2667
/0/4b memory 256KiB L1 cache
/0/4c memory 1MiB L2 cache
/0/4d memory 8MiB L3 cache
/0/4e processor Intel(R) Core(TM) i5-8300H CPU
/0/100 bridge Intel Corporation
/0/100/1 bridge Xeon E3-1200 v5/E3-1500 v5/6th
/0/100/1/0 display GP107M [GeForce GTX 1050 Ti Mob
/0/100/2 display Intel Corporation
/0/100/4 generic Xeon E3-1200 v5/E3-1500 v5/6th
/0/100/8 generic Xeon E3-1200 v5/v6 / E3-1500 v5
/0/100/12 generic Cannon Lake PCH Thermal Control
/0/100/14 bus Cannon Lake PCH USB 3.1 xHCI Ho
/0/100/14/0 usb1 bus xHCI Host Controller
/0/100/14/0/5 multimedia Integrated_Webcam_HD
/0/100/14/0/6 generic USB2.0-CRW
/0/100/14/0/9 communication Goodix Fingerprint Device
/0/100/14/0/e communication Interface sans fil Bluetooth
/0/100/14/1 usb2 bus xHCI Host Controller
/0/100/14.2 memory RAM memory
/0/100/14.3 wlo1 network Wireless-AC 9560 [Jefferson Pea
/0/100/15 bus Intel Corporation
/0/100/15.1 bus Intel Corporation
/0/100/16 communication Cannon Lake PCH HECI Controller
/0/100/17 storage Intel Corporation
/0/100/1d bridge Cannon Lake PCH PCI Express Roo
/0/100/1d/0 storage SK hynix
/0/100/1d.5 bridge Intel Corporation
/0/100/1d.5/0 enp3s0 network RTL8111/8168/8411 PCI Express G
/0/100/1f bridge Intel Corporation
/0/100/1f.3 multimedia Cannon Lake PCH cAVS
/0/100/1f.4 bus Cannon Lake PCH SMBus Controlle
/0/100/1f.5 bus Cannon Lake PCH SPI Controller
/0/1 scsi0 storage
/0/1/0.0.0 /dev/sda disk 1TB ST1000LM035-1RK1
/0/1/0.0.0/1 /dev/sda1 volume 931GiB Volume EXT4
/1 power DELL W7NKD8AEt voici le lien suite à un boot-info
http://paste.ubuntu.com/p/xWxwZ3SGr8/
Voici ce que donne systemd-analyze
Startup finished in 6.207s (firmware) + 3.743s (loader) + 33.455s (kernel) + 22.444s (userspace) = 1min 5.850s
graphical.target reached after 10.700s in userspaceMerci d'avance pour vos conseils.
Dernière modification par lorismazza (Le 13/03/2019, à 22:10)
Hors ligne
#2 Le 09/03/2019, à 23:08
- stephane13
Re : [résolu] boot plus lent après installation 18.04
Fait un clear CMOS?
Ubuntu Mate 22.04
Hors ligne
#3 Le 09/03/2019, à 23:29
- lorismazza
Re : [résolu] boot plus lent après installation 18.04
stephane13 a écrit :
Fait un clear CMOS?
C'est à dire remettre les paramètres d'usine dans le bios? J'ai essayé mais ça ne change rien au temps de boot.
Hors ligne
#4 Le 09/03/2019, à 23:49
- nany
Re : [résolu] boot plus lent après installation 18.04
Bonjour,
lorismazza a écrit :
Voici ce que donne systemd-analyze
Startup finished in 6.207s (firmware) + 3.743s (loader) + 33.455s (kernel) + 22.444s (userspace) = 1min 5.850s graphical.target reached after 10.700s in userspace
Pour compléter, donne les retours de :
systemd-analyze critical-chainsystemd-analyze blameHors ligne
#5 Le 09/03/2019, à 23:57
- stephane13
Re : [résolu] boot plus lent après installation 18.04
Corrige moi si je me trompe: la commande affiche 1min 5.850s à démarrer, ça correspond selon toi à la réalité, et c'est ça qui te gène? Ou bien c'est encore plus long que ça?
Ubuntu Mate 22.04
Hors ligne
#6 Le 10/03/2019, à 00:02
- nany
Re : [résolu] boot plus lent après installation 18.04
stephane13 a écrit :
et c'est ça qui te gène?
À qui poses-tu la question ?
Bon, je réponds quand même : une minute, c’est long pour un Dell G3.
Hors ligne
#7 Le 10/03/2019, à 07:52
- lorismazza
Re : [résolu] boot plus lent après installation 18.04
stephane13 a écrit :
Corrige moi si je me trompe: la commande affiche 1min 5.850s à démarrer, ça correspond selon toi à la réalité, et c'est ça qui te gène? Ou bien c'est encore plus long que ça?
C'est surtout qu'avant mes problèmes d'installation, l'ordinateur bootait en moins de 10 secondes (et encore). Donc, je me dis qu'il y a peut-être un problème ou qu'on peut faire qqch pour améliorer cela.
Hors ligne
#8 Le 10/03/2019, à 09:35
- nany
Re : [résolu] boot plus lent après installation 18.04
nany a écrit :
Bonjour,
lorismazza a écrit :Voici ce que donne systemd-analyze
Startup finished in 6.207s (firmware) + 3.743s (loader) + 33.455s (kernel) + 22.444s (userspace) = 1min 5.850s graphical.target reached after 10.700s in userspacePour compléter, donne les retours de :
systemd-analyze critical-chainsystemd-analyze blame
Hors ligne
#9 Le 10/03/2019, à 11:24
- stephane13
Re : [résolu] boot plus lent après installation 18.04
lorismazza a écrit :
stephane13 a écrit :Corrige moi si je me trompe: la commande affiche 1min 5.850s à démarrer, ça correspond selon toi à la réalité, et c'est ça qui te gène? Ou bien c'est encore plus long que ça?
C'est surtout qu'avant mes problèmes d'installation, l'ordinateur bootait en moins de 10 secondes (et encore). Donc, je me dis qu'il y a peut-être un problème ou qu'on peut faire qqch pour améliorer cela.
OK merci, je voulais être sûr de bien comprendre le problème.
Ubuntu Mate 22.04
Hors ligne
#10 Le 10/03/2019, à 12:34
- lorismazza
Re : [résolu] boot plus lent après installation 18.04
Voici ce que donne systemd-analyze critical-chain
graphical.target @10.773s
└─multi-user.target @10.772s
└─windscribe-cli.service @9.172s +1.599s
└─network-online.target @9.170s
└─NetworkManager-wait-online.service @3.046s +6.123s
└─NetworkManager.service @2.831s +213ms
└─dbus.service @2.818s
└─basic.target @2.812s
└─sockets.target @2.812s
└─snapd.socket @2.809s +1ms
└─sysinit.target @2.804s
└─systemd-timesyncd.service @2.623s +180ms
└─systemd-tmpfiles-setup.service @2.597s +23ms
└─local-fs.target @2.594s
└─run-snapd-ns-plexmediaserver.mnt.mount @4.741s
└─run-snapd-ns.mount @4.277s
└─local-fs-pre.target @2.539s
└─lvm2-monitor.service @2.520s +18ms
└─systemd-journald.socket @277ms
└─system.slice @277msEt voici pour systemd-analyze blame
6.123s NetworkManager-wait-online.service
4.398s plymouth-quit-wait.service
1.991s systemd-udev-settle.service
1.599s windscribe-cli.service
1.529s snapd.service
765ms fwupd.service
600ms dev-mapper-ubuntu\x2d\x2dvg\x2droot.device
236ms systemd-logind.service
213ms NetworkManager.service
206ms nvidia-persistenced.service
190ms upower.service
183ms systemd-resolved.service
180ms systemd-timesyncd.service
172ms snap-plexmediaserver-5.mount
171ms networkd-dispatcher.service
168ms systemd-journal-flush.service
161ms tlp.service
146ms systemd-tmpfiles-clean.service
139ms udisks2.service
138ms gpu-manager.service
136ms snap-vlc-770.mount
126ms mnt-835070e7\x2d9fdf\x2d4c45\x2d8491\x2d2caa07e937b7.mount
123ms snap-gnome\x2dsystem\x2dmonitor-57.mountHors ligne
#11 Le 10/03/2019, à 13:19
- stephane13
Re : [résolu] boot plus lent après installation 18.04
Essais de réinstaller le grub.
Vérifie si les paramètres de l'uefi sont bons (https://doc.ubuntu-fr.org/uefi).
Ubuntu Mate 22.04
Hors ligne
#12 Le 11/03/2019, à 06:48
- nany
Re : [résolu] boot plus lent après installation 18.04
Les deux derniers retours de systemd-analyze ne donnent rien de probant.
+ 33.455s (kernel)C’est au niveau du chargement du noyau que ça semble long.
Juste après un démarrage, donne le retour de :
dmesgHors ligne
#13 Le 12/03/2019, à 00:33
- lorismazza
Re : [résolu] boot plus lent après installation 18.04
Bonjour,
Voici le retour dmesg
loris@loris-G3-3779:~$ dmesg
[ 0.000000] Linux version 4.15.0-46-generic (buildd@lgw01-amd64-038) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #49-Ubuntu SMP Wed Feb 6 09:33:07 UTC 2019 (Ubuntu 4.15.0-46.49-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-46-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006926dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006926e000-0x000000006926efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006926f000-0x000000006926ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069270000-0x0000000078cdafff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078cdb000-0x000000007a452fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a453000-0x000000007a4cffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007a4d0000-0x000000007ae44fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ae45000-0x000000007b51afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b51b000-0x000000007b5fdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007b5fe000-0x000000007b5fefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b5ff000-0x000000007f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x7a46c000 ACPI=0x7a46c000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 ESRT=0x7b230218 MEMATTR=0x74a79018
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Dell Inc. G3 3779/0Y13VR, BIOS 1.5.1 11/01/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x27e800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007E000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 007D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x7b5ff max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000007b230218 to 0x000000007b230250.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x3a73f000, 0x3a73ffff] PGTABLE
[ 0.000000] BRK [0x3a740000, 0x3a740fff] PGTABLE
[ 0.000000] BRK [0x3a741000, 0x3a741fff] PGTABLE
[ 0.000000] BRK [0x3a742000, 0x3a742fff] PGTABLE
[ 0.000000] BRK [0x3a743000, 0x3a743fff] PGTABLE
[ 0.000000] BRK [0x3a744000, 0x3a744fff] PGTABLE
[ 0.000000] BRK [0x3a745000, 0x3a745fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x333ed000-0x359edfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007A46C000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007A46C0B8 0000F4 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007A4AE0E0 000114 (v06 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007A46C240 041E9B (v02 DELL CBX3 01072009 INTL 20160527)
[ 0.000000] ACPI: FACS 0x000000007AE43C00 000040
[ 0.000000] ACPI: APIC 0x000000007A4AE1F8 0000BC (v04 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007A4AE2B8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007A4AE300 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007A4AE3A0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000007A4AE3E0 000761 (v01 SataRe SataTabl 00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000007A4AEB48 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.000000] ACPI: BOOT 0x000000007A4B0320 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007A4B0348 001336 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000007A4B1680 0025EE (v02 PegSsd PegSsdt 00001000 INTL 20160527)
[ 0.000000] ACPI: HPET 0x000000007A4B3C70 000038 (v01 INTEL CBX3 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x000000007A4B3CA8 002A07 (v02 INTEL xh_cfhd4 00000000 INTL 20160527)
[ 0.000000] ACPI: UEFI 0x000000007A4B66B0 000048 (v01 DELL\x CBX3 00000002 01000013)
[ 0.000000] ACPI: LPIT 0x000000007A4B66F8 00005C (v01 INTEL CBX3 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x000000007A4B6758 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000007A4B8F38 000FFE (v02 INTEL TbtTypeC 00000000 INTL 20160527)
[ 0.000000] ACPI: DBGP 0x000000007A4B9F38 000034 (v01 DELL\x CBX3 00000002 01000013)
[ 0.000000] ACPI: DBG2 0x000000007A4B9F70 000054 (v00 DELL\x CBX3 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x000000007A4B9FC8 0007E8 (v02 DELL\x UsbCTabl 00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000007A4BA7B0 006193 (v02 DptfTa DptfTabl 00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000007A4C0948 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000007A4C0A90 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527)
[ 0.000000] ACPI: DMAR 0x000000007A4C0B40 0000A8 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: TPM2 0x000000007A4C0BE8 000034 (v04 DELL\x CBX3 00000001 AMI 00000000)
[ 0.000000] ACPI: SSDT 0x000000007A4C0C20 001F98 (v01 OptRef OptTabl 00001000 INTL 20160527)
[ 0.000000] ACPI: BGRT 0x000000007A4C2BB8 000038 (v00 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027e7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27e7d3000-0x27e7fdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027e7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000006926dfff]
[ 0.000000] node 0: [mem 0x0000000069270000-0x0000000078cdafff]
[ 0.000000] node 0: [mem 0x000000007b5fe000-0x000000007b5fefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027e7fffff]
[ 0.000000] Reserved but unavailable: 29576 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027e7fffff]
[ 0.000000] On node 0 totalpages: 2061432
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7668 pages used for memmap
[ 0.000000] DMA32 zone: 490714 pages, LIFO batch:31
[ 0.000000] Normal zone: 24480 pages used for memmap
[ 0.000000] Normal zone: 1566720 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000007d800000-0x000000007f7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6926e000-0x6926efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6926f000-0x6926ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78cdb000-0x7a452fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a453000-0x7a4cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a4d0000-0x7ae44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ae45000-0x7b51afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b51b000-0x7b5fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b5ff000-0x7f7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7f800000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2029197
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-46-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7936056K/8245728K available (12300K kernel code, 2473K rwdata, 4252K rodata, 2408K init, 2416K bss, 309672K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39198 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 13 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] DMAR: Host address width 39
[ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.004000] DMAR: RMRR base: 0x0000007afdc000 end: 0x0000007b225fff
[ 0.004000] DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
[ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.004000] x2apic enabled
[ 0.004000] Switched APIC routing to cluster x2apic.
[ 0.016000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.036000] tsc: Detected 2300.000 MHz processor
[ 0.036000] tsc: Detected 2304.000 MHz TSC
[ 0.036000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4608.00 BogoMIPS (lpj=9216000)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.036000] Security Framework initialized
[ 0.036000] Yama: becoming mindful.
[ 0.036000] AppArmor: AppArmor initialized
[ 0.036000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.036000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.036000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.036000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.036000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.036000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.036000] mce: CPU supports 10 MCE banks
[ 0.036000] CPU0: Thermal monitoring enabled (TM1)
[ 0.036000] process: using mwait in idle threads
[ 0.036000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.036000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.036000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.036000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.036000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.036000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.036000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.036000] Freeing SMP alternatives memory: 36K
[ 0.042922] TSC deadline timer enabled
[ 0.042933] smpboot: CPU0: Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.043000] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.043038] ... version: 4
[ 0.043039] ... bit width: 48
[ 0.043039] ... generic registers: 4
[ 0.043040] ... value mask: 0000ffffffffffff
[ 0.043041] ... max period: 00007fffffffffff
[ 0.043042] ... fixed-purpose events: 3
[ 0.043042] ... event mask: 000000070000000f
[ 0.043085] Hierarchical SRCU implementation.
[ 0.044000] smp: Bringing up secondary CPUs ...
[ 0.044000] x86: Booting SMP configuration:
[ 0.044000] .... node #0, CPUs: #1
[ 0.044000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.044000] #2 #3 #4 #5 #6 #7
[ 0.049003] smp: Brought up 1 node, 8 CPUs
[ 0.049003] smpboot: Max logical packages: 1
[ 0.049003] smpboot: Total of 8 processors activated (36864.00 BogoMIPS)
[ 0.052295] devtmpfs: initialized
[ 0.052295] x86/mm: Memory block size: 128MB
[ 0.052774] evm: security.selinux
[ 0.052775] evm: security.SMACK64
[ 0.052776] evm: security.SMACK64EXEC
[ 0.052776] evm: security.SMACK64TRANSMUTE
[ 0.052777] evm: security.SMACK64MMAP
[ 0.052777] evm: security.apparmor
[ 0.052778] evm: security.ima
[ 0.052779] evm: security.capability
[ 0.052794] PM: Registering ACPI NVS region [mem 0x6926e000-0x6926efff] (4096 bytes)
[ 0.052794] PM: Registering ACPI NVS region [mem 0x7a4d0000-0x7ae44fff] (9916416 bytes)
[ 0.052794] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.052794] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.052794] pinctrl core: initialized pinctrl subsystem
[ 0.052794] RTC time: 22:28:40, date: 03/11/19
[ 0.052794] NET: Registered protocol family 16
[ 0.052794] audit: initializing netlink subsys (disabled)
[ 0.052794] audit: type=2000 audit(1552343320.052:1): state=initialized audit_enabled=0 res=1
[ 0.052794] cpuidle: using governor ladder
[ 0.052794] cpuidle: using governor menu
[ 0.052794] Simple Boot Flag at 0x47 set to 0x80
[ 0.052794] ACPI: bus type PCI registered
[ 0.052794] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.052794] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.052794] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.052794] PCI: Using configuration type 1 for base access
[ 0.056034] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.056034] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.056093] ACPI: Added _OSI(Module Device)
[ 0.056093] ACPI: Added _OSI(Processor Device)
[ 0.056094] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.056095] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.056096] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.056097] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.056098] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.100186] ACPI: Executed 45 blocks of module-level executable AML code
[ 0.129806] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.141328] ACPI: Dynamic OEM Table Load:
[ 0.141336] ACPI: SSDT 0xFFFF9C05B41FA800 0005DF (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.141774] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.141950] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.143763] ACPI: Dynamic OEM Table Load:
[ 0.143770] ACPI: SSDT 0xFFFF9C05B4305000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.144146] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.144416] ACPI: Dynamic OEM Table Load:
[ 0.144422] ACPI: SSDT 0xFFFF9C05B3C84A00 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.144769] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.145011] ACPI: Dynamic OEM Table Load:
[ 0.145017] ACPI: SSDT 0xFFFF9C05B41F8800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.145336] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.146224] ACPI: Dynamic OEM Table Load:
[ 0.146234] ACPI: SSDT 0xFFFF9C05B5940000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.147733] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.148014] ACPI: Dynamic OEM Table Load:
[ 0.148020] ACPI: SSDT 0xFFFF9C05B4302000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.148471] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.148760] ACPI: Dynamic OEM Table Load:
[ 0.148765] ACPI: SSDT 0xFFFF9C05B4300C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.149214] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.153637] ACPI: EC: EC started
[ 0.153638] ACPI: EC: interrupt blocked
[ 0.161607] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.161609] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.161611] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.161612] ACPI: Interpreter enabled
[ 0.161668] ACPI: (supports S0 S3 S4 S5)
[ 0.161669] ACPI: Using IOAPIC for interrupt routing
[ 0.161722] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.162977] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.166156] ACPI: Power Resource [PG00] (on)
[ 0.218010] ACPI: Power Resource [USBC] (on)
[ 0.223081] ACPI: Power Resource [V0PR] (on)
[ 0.223747] ACPI: Power Resource [V1PR] (on)
[ 0.224410] ACPI: Power Resource [V2PR] (on)
[ 0.241676]
Initialized Local Variables for Method [_CRS]:
[ 0.241677] Local0: (ptrval) <Obj> Integer 0000000000000000
[ 0.241682] Local1: (ptrval) <Obj> Integer 0000000000000000
[ 0.241686] No Arguments are initialized for method [_CRS]
[ 0.241688] ACPI Error: Method parse/execution failed \_SB.PCI0.SPI1.FPNT._CRS, AE_AML_INVALID_RESOURCE_TYPE (20170831/psparse-550)
[ 0.241701] ACPI Error: Method execution failed \_SB.PCI0.SPI1.FPNT._CRS, AE_AML_INVALID_RESOURCE_TYPE (20170831/uteval-103)
[ 0.243641]
Initialized Local Variables for Method [_CRS]:
[ 0.243642] Local0: (ptrval) <Obj> Integer 0000000000000000
[ 0.243646] Local1: (ptrval) <Obj> Integer 0000000000000000
[ 0.243650] No Arguments are initialized for method [_CRS]
[ 0.243652] ACPI Error: Method parse/execution failed \_SB.PCI0.SPI2.FPNT._CRS, AE_AML_INVALID_RESOURCE_TYPE (20170831/psparse-550)
[ 0.243663] ACPI Error: Method execution failed \_SB.PCI0.SPI2.FPNT._CRS, AE_AML_INVALID_RESOURCE_TYPE (20170831/uteval-103)
[ 0.245410] ACPI: Power Resource [WRST] (on)
[ 0.256062] ACPI: Power Resource [PIN] (off)
[ 0.256784] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.256792] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.260740] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.261952] PCI host bridge to bus 0000:00
[ 0.261955] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.261957] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.261958] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.261960] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.261961] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.261962] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.261964] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.261965] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.261967] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.261968] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.261969] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.261971] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
[ 0.261972] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.261974] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.261983] pci 0000:00:00.0: [8086:3e10] type 00 class 0x060000
[ 0.262156] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.262204] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.262510] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
[ 0.262522] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
[ 0.262529] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.262534] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.262552] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.262733] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.262746] pci 0000:00:04.0: reg 0x10: [mem 0xa4410000-0xa4417fff 64bit]
[ 0.262992] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.263004] pci 0000:00:08.0: reg 0x10: [mem 0xa442c000-0xa442cfff 64bit]
[ 0.263264] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.263312] pci 0000:00:12.0: reg 0x10: [mem 0xa442b000-0xa442bfff 64bit]
[ 0.263673] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.263721] pci 0000:00:14.0: reg 0x10: [mem 0xa4400000-0xa440ffff 64bit]
[ 0.263872] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.264500] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.264539] pci 0000:00:14.2: reg 0x10: [mem 0xa4422000-0xa4423fff 64bit]
[ 0.264560] pci 0000:00:14.2: reg 0x18: [mem 0xa442a000-0xa442afff 64bit]
[ 0.264852] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
[ 0.265028] pci 0000:00:14.3: reg 0x10: [mem 0xa441c000-0xa441ffff 64bit]
[ 0.265601] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.266183] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
[ 0.266911] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.269432] pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
[ 0.270160] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.272515] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.272559] pci 0000:00:16.0: reg 0x10: [mem 0xa4427000-0xa4427fff 64bit]
[ 0.272689] pci 0000:00:16.0: PME# supported from D3hot
[ 0.272989] pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
[ 0.273029] pci 0000:00:17.0: reg 0x10: [mem 0xa4420000-0xa4421fff]
[ 0.273045] pci 0000:00:17.0: reg 0x14: [mem 0xa4426000-0xa44260ff]
[ 0.273061] pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097]
[ 0.273077] pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083]
[ 0.273094] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
[ 0.273110] pci 0000:00:17.0: reg 0x24: [mem 0xa4425000-0xa44257ff]
[ 0.273200] pci 0000:00:17.0: PME# supported from D3hot
[ 0.273541] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.273757] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.273807] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[ 0.274110] pci 0000:00:1d.5: [8086:a335] type 01 class 0x060400
[ 0.274330] pci 0000:00:1d.5: PME# supported from D0 D3hot D3cold
[ 0.274379] pci 0000:00:1d.5: PTM enabled (root), 4dns granularity
[ 0.274664] pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
[ 0.275027] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 0.275107] pci 0000:00:1f.3: reg 0x10: [mem 0xa4418000-0xa441bfff 64bit]
[ 0.275181] pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit]
[ 0.275336] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.276436] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.276629] pci 0000:00:1f.4: reg 0x10: [mem 0xa4424000-0xa44240ff 64bit]
[ 0.276833] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.277267] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.277297] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.277594] pci 0000:01:00.0: [10de:1c8c] type 00 class 0x030200
[ 0.277626] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[ 0.277644] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.277662] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[ 0.277674] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 0.277686] pci 0000:01:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref]
[ 0.288021] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.288024] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.288027] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
[ 0.288030] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.288281] pci 0000:02:00.0: [1c5c:1327] type 00 class 0x010802
[ 0.288342] pci 0000:02:00.0: reg 0x10: [mem 0xa4300000-0xa4303fff 64bit]
[ 0.288556] pci 0000:02:00.0: supports D1
[ 0.288558] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.288790] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.288800] pci 0000:00:1d.0: bridge window [mem 0xa4300000-0xa43fffff]
[ 0.289000] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.289045] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.289086] pci 0000:03:00.0: reg 0x18: [mem 0xa4204000-0xa4204fff 64bit]
[ 0.289110] pci 0000:03:00.0: reg 0x20: [mem 0xa4200000-0xa4203fff 64bit]
[ 0.289258] pci 0000:03:00.0: supports D1 D2
[ 0.289259] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300053] pci 0000:00:1d.5: PCI bridge to [bus 03]
[ 0.300058] pci 0000:00:1d.5: bridge window [io 0x3000-0x3fff]
[ 0.300064] pci 0000:00:1d.5: bridge window [mem 0xa4200000-0xa42fffff]
[ 0.302696] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 0.302752] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 0.302804] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 0.302857] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[ 0.302909] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[ 0.302962] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[ 0.303014] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[ 0.303066] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[ 0.310549] ACPI: EC: interrupt unblocked
[ 0.310563] ACPI: EC: event unblocked
[ 0.310591] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.310593] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.311046] SCSI subsystem initialized
[ 0.311062] libata version 3.00 loaded.
[ 0.311062] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.311062] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.311062] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.311062] vgaarb: loaded
[ 0.311062] ACPI: bus type USB registered
[ 0.311062] usbcore: registered new interface driver usbfs
[ 0.311062] usbcore: registered new interface driver hub
[ 0.311062] usbcore: registered new device driver usb
[ 0.311062] EDAC MC: Ver: 3.0.0
[ 0.312148] Registered efivars operations
[ 0.355838] PCI: Using ACPI for IRQ routing
[ 0.394805] PCI: pci_cache_line_size set to 64 bytes
[ 0.395121] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.395123] e820: reserve RAM buffer [mem 0x6926e000-0x6bffffff]
[ 0.395124] e820: reserve RAM buffer [mem 0x78cdb000-0x7bffffff]
[ 0.395125] e820: reserve RAM buffer [mem 0x7b5ff000-0x7bffffff]
[ 0.395126] e820: reserve RAM buffer [mem 0x27e800000-0x27fffffff]
[ 0.395218] NetLabel: Initializing
[ 0.395219] NetLabel: domain hash size = 128
[ 0.395219] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.395234] NetLabel: unlabeled traffic allowed by default
[ 0.396474] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.396480] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.403111] clocksource: Switched to clocksource hpet
[ 0.410408] VFS: Disk quotas dquot_6.6.0
[ 0.410422] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.410511] AppArmor: AppArmor Filesystem Enabled
[ 0.410530] pnp: PnP ACPI init
[ 0.410811] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.410813] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.410818] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.410845] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.410981] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.410986] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.411124] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.411145] pnp 00:04: Plug and Play ACPI device, IDs DLL0870 PNP0f13 (active)
[ 0.411405] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.411406] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.411408] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.411410] system 00:05: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.411412] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.411414] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.411415] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.411417] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.411421] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411754] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.411756] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.411758] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.411760] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.411762] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.411763] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.411765] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.411769] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412285] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.412289] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.413965] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.418905] pnp: PnP ACPI: found 9 devices
[ 0.430233] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.430284] pci 0000:00:15.0: BAR 0: assigned [mem 0x7f800000-0x7f800fff 64bit]
[ 0.430560] pci 0000:00:15.1: BAR 0: assigned [mem 0x7f801000-0x7f801fff 64bit]
[ 0.430835] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.430837] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.430840] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff]
[ 0.430842] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.430847] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.430858] pci 0000:00:1d.0: bridge window [mem 0xa4300000-0xa43fffff]
[ 0.430872] pci 0000:00:1d.5: PCI bridge to [bus 03]
[ 0.430876] pci 0000:00:1d.5: bridge window [io 0x3000-0x3fff]
[ 0.430883] pci 0000:00:1d.5: bridge window [mem 0xa4200000-0xa42fffff]
[ 0.430898] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.430900] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.430901] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.430903] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.430904] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.430906] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.430907] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.430909] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.430910] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.430912] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.430913] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.430915] pci_bus 0000:00: resource 15 [mem 0x7f800000-0xefffffff window]
[ 0.430916] pci_bus 0000:00: resource 16 [mem 0xfc800000-0xfe7fffff window]
[ 0.430918] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.430919] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
[ 0.430921] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.430923] pci_bus 0000:02: resource 1 [mem 0xa4300000-0xa43fffff]
[ 0.430924] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.430925] pci_bus 0000:03: resource 1 [mem 0xa4200000-0xa42fffff]
[ 0.431150] NET: Registered protocol family 2
[ 0.431310] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.431421] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.431526] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.431556] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.431578] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.431628] NET: Registered protocol family 1
[ 0.431641] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.432226] PCI: CLS 64 bytes, default 64
[ 0.432257] Unpacking initramfs...
[ 1.024755] Freeing initrd memory: 38916K
[ 1.024788] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.024790] software IO TLB [mem 0x7056f000-0x7456f000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 1.025267] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[ 1.025710] Scanning for low memory corruption every 60 seconds
[ 1.026331] Initialise system trusted keyrings
[ 1.026336] Key type blacklist registered
[ 1.026459] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.027061] zbud: loaded
[ 1.027384] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.027591] fuse init (API version 7.26)
[ 1.032927] Key type asymmetric registered
[ 1.032927] Asymmetric key parser 'x509' registered
[ 1.032944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.033051] io scheduler noop registered
[ 1.033052] io scheduler deadline registered
[ 1.033067] io scheduler cfq registered (default)
[ 1.038092] pcieport 0000:00:1d.0: AER enabled with IRQ 123
[ 1.038115] pcieport 0000:00:1d.5: AER enabled with IRQ 124
[ 1.038124] pcieport 0000:00:01.0: Signaling PME with IRQ 122
[ 1.038139] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[ 1.038154] pcieport 0000:00:1d.5: Signaling PME with IRQ 124
[ 1.038171] dpc 0000:00:1d.0:pcie010: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 1.038182] dpc 0000:00:1d.5:pcie010: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 1.038214] efifb: probing for efifb
[ 1.038220] efifb: framebuffer at 0x80000000, using 8128k, total 8128k
[ 1.038221] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.038221] efifb: scrolling: redraw
[ 1.038222] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.038310] Console: switching to colour frame buffer device 240x67
[ 1.038325] fb0: EFI VGA frame buffer device
[ 1.038330] intel_idle: MWAIT substates: 0x11142120
[ 1.038330] intel_idle: v0.4.1 model 0x9E
[ 1.038913] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.043523] ACPI: AC Adapter [AC] (on-line)
[ 1.043564] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.043694] ACPI: Lid Switch [LID0]
[ 1.043717] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.043841] ACPI: Power Button [PBTN]
[ 1.043859] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.043878] ACPI: Sleep Button [SBTN]
[ 1.043895] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.043999] ACPI: Power Button [PWRF]
[ 1.046166] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.046617] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.046618] ACPI: Thermal Zone [THM] (25 C)
[ 1.046816] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.050922] Linux agpgart interface v0.103
[ 1.076505] random: fast init done
[ 1.082508] ACPI: Battery Slot [BAT0] (battery present)
[ 1.095121] tpm tpm0: A TPM error (378) occurred get tpm pcr allocation
[ 1.098748] loop: module loaded
[ 1.098891] libphy: Fixed MDIO Bus: probed
[ 1.098892] tun: Universal TUN/TAP device driver, 1.6
[ 1.099034] PPP generic driver version 2.4.2
[ 1.099204] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.099207] ehci-pci: EHCI PCI platform driver
[ 1.099215] ehci-platform: EHCI generic platform driver
[ 1.099225] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.099226] ohci-pci: OHCI PCI platform driver
[ 1.099233] ohci-platform: OHCI generic platform driver
[ 1.099239] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.099436] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.099441] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.100656] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 1.100664] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.100868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.100870] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.100872] usb usb1: Product: xHCI Host Controller
[ 1.100873] usb usb1: Manufacturer: Linux 4.15.0-46-generic xhci-hcd
[ 1.100874] usb usb1: SerialNumber: 0000:00:14.0
[ 1.101080] hub 1-0:1.0: USB hub found
[ 1.101101] hub 1-0:1.0: 16 ports detected
[ 1.101490] ACPI Error: [\_SB_.UBTC.RUCC] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 1.101499] No Local Variables are initialized for Method [_PLD]
[ 1.101500] No Arguments are initialized for method [_PLD]
[ 1.101502] ACPI Error: Method parse/execution failed \_SB.PCI0.XHC.RHUB.HS04._PLD, AE_NOT_FOUND (20170831/psparse-550)
[ 1.103016] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.103019] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.103021] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.103055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.103057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.103058] usb usb2: Product: xHCI Host Controller
[ 1.103059] usb usb2: Manufacturer: Linux 4.15.0-46-generic xhci-hcd
[ 1.103061] usb usb2: SerialNumber: 0000:00:14.0
[ 1.103299] hub 2-0:1.0: USB hub found
[ 1.103316] hub 2-0:1.0: 8 ports detected
[ 1.104504] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.104943] i8042: Warning: Keylock active
[ 1.106704] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.106707] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.107034] mousedev: PS/2 mouse device common for all mice
[ 1.107906] rtc_cmos 00:01: RTC can wake from S4
[ 1.109451] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.109695] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.109701] i2c /dev entries driver
[ 1.109706] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 1.109762] device-mapper: uevent: version 1.0.3
[ 1.109979] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.109994] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.109996] intel_pstate: Intel P-state driver initializing
[ 1.110069] intel_pstate: Disabling energy efficiency optimization
[ 1.112990] intel_pstate: HWP enabled
[ 1.113977] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.113979] EFI Variables Facility v0.08 2004-May-17
[ 1.169229] intel_pmc_core: initialized
[ 1.169382] NET: Registered protocol family 10
[ 1.174006] Segment Routing with IPv6
[ 1.174018] NET: Registered protocol family 17
[ 1.174215] Key type dns_resolver registered
[ 1.175429] RAS: Correctable Errors collector initialized.
[ 1.175445] microcode: sig=0x906ea, pf=0x20, revision=0x96
[ 1.175948] microcode: Microcode Update Driver: v2.2.
[ 1.175954] sched_clock: Marking stable (1175945948, 0)->(1157530507, 18415441)
[ 1.176619] registered taskstats version 1
[ 1.176624] Loading compiled-in X.509 certificates
[ 1.178336] Loaded X.509 cert 'Build time autogenerated kernel key: b873a790e41754b50f7dbae45b6bd46229c3c73f'
[ 1.179445] Loaded UEFI:db cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' linked to secondary sys keyring
[ 1.179459] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 1.179471] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 1.182161] Loaded UEFI:MokListRT cert 'loris-G3-3779 Secure Boot Module Signature key: ff2f1fa53fd946809b191e9afd9a9a90ff0d5724' linked to secondary sys keyring
[ 1.182299] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 1.183206] zswap: loaded using pool lzo/zbud
[ 1.186467] Key type big_key registered
[ 1.186468] Key type trusted registered
[ 1.187633] Key type encrypted registered
[ 1.187634] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.187635] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.187637] ima: Allocated hash algorithm: sha1
[ 1.187643] evm: HMAC attrs: 0x1
[ 1.189698] Magic number: 11:69:502
[ 1.190112] rtc_cmos 00:01: setting system clock to 2019-03-11 22:28:41 UTC (1552343321)
[ 1.190284] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.190285] EDD information not available.
[ 1.191573] Freeing unused kernel memory: 2408K
[ 1.236282] Write protecting the kernel read-only data: 20480k
[ 1.236722] Freeing unused kernel memory: 2008K
[ 1.238933] Freeing unused kernel memory: 1892K
[ 1.242651] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.242651] x86/mm: Checking user space page tables
[ 1.246283] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.254565] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.254621] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.254624] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.319103] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.328322] ahci 0000:00:17.0: version 3.0
[ 1.328569] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 1.330034] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.330426] nvme nvme0: pci function 0000:02:00.0
[ 1.338724] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.338726] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm clo only pio slum part ems deso sadm sds apst
[ 1.339093] scsi host0: ahci
[ 1.339125] ata1: SATA max UDMA/133 abar m2048@0xa4425000 port 0xa4425100 irq 126
[ 1.341440] r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0x (ptrval), 3c:2c:30:e3:e7:85, XID 14100800 IRQ 128
[ 1.341441] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.373245] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.436125] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.548349] nvme0n1: p1 p2 p3
[ 1.592973] usb 1-5: New USB device found, idVendor=1bcf, idProduct=28c1
[ 1.592974] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.592975] usb 1-5: Product: Integrated_Webcam_HD
[ 1.592976] usb 1-5: Manufacturer: CN0WNTY0LOG008AJD35LA01
[ 1.653142] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.665323] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.665325] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.665326] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.666671] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.720248] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 1.798133] ata1.00: ATA-10: ST1000LM035-1RK172, SDM3, max UDMA/133
[ 1.798134] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.821903] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.821905] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.821906] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.822290] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.859583] ata1.00: configured for UDMA/133
[ 1.861403] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 SDM3 PQ: 0 ANSI: 5
[ 1.861912] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.862440] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.862441] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.862533] sd 0:0:0:0: [sda] Write Protect is off
[ 1.862534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.862674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.868523] usb 1-6: New USB device found, idVendor=0bda, idProduct=0129
[ 1.868524] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.868525] usb 1-6: Product: USB2.0-CRW
[ 1.868526] usb 1-6: Manufacturer: Generic
[ 1.868527] usb 1-6: SerialNumber: 20100201396000000
[ 1.911009] sda: sda1
[ 1.911794] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.996081] usb 1-9: new full-speed USB device number 4 using xhci_hcd
[ 2.044612] clocksource: Switched to clocksource tsc
[ 2.080275] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4648]
[ 2.109180] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..]
[ 2.109184] psmouse serio1: synaptics: Your touchpad (PNP: DLL0870 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.146103] usb 1-9: New USB device found, idVendor=27c6, idProduct=5301
[ 2.146105] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.146105] usb 1-9: Product: Goodix Fingerprint Device
[ 2.146107] usb 1-9: Manufacturer: HTMicroelectronics
[ 2.146107] usb 1-9: SerialNumber: HTK32
[ 2.166347] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3240, fw id: 2374689
[ 2.202183] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.272181] usb 1-14: new full-speed USB device number 5 using xhci_hcd
[ 2.422097] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa
[ 2.422099] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.426961] usbcore: registered new interface driver rtsx_usb
[ 33.542155] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 33.668068] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 33.772486] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 33.792840] systemd[1]: Detected architecture x86-64.
[ 33.794905] systemd[1]: Set hostname to <loris-G3-3779>.
[ 33.891427] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 33.891528] systemd[1]: Created slice User and Session Slice.
[ 33.891592] systemd[1]: Created slice System Slice.
[ 33.891645] systemd[1]: Listening on Syslog Socket.
[ 33.891706] systemd[1]: Listening on Journal Audit Socket.
[ 33.891740] systemd[1]: Listening on udev Control Socket.
[ 33.891770] systemd[1]: Listening on LVM2 poll daemon socket.
[ 33.903210] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 33.907764] random: crng init done
[ 33.907765] random: 7 urandom warning(s) missed due to ratelimiting
[ 33.908387] lp: driver loaded but no devices found
[ 33.911055] ppdev: user-space parallel port driver
[ 33.926613] systemd-journald[323]: Received request to flush runtime journal from PID 1
[ 33.997573] input: Intel HID events as /devices/platform/INT33D5:00/input/input7
[ 33.997630] intel-hid INT33D5:00: platform supports 5 button array
[ 33.997648] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input8
[ 33.998015] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 33.998078] wmi_bus wmi_bus-PNP0C14:05: WQBC data block query control method not found
[ 33.998080] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 33.998167] acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 34.002917] acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 34.044568] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 34.044709] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.045459] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 34.047668] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 34.047870] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 34.051752] ipmi message handler version 39.2
[ 34.054374] ipmi device interface
[ 34.059913] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 34.062094] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 34.062095] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 34.062096] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 34.062096] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 34.062097] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 34.062098] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 34.064372] Intel(R) Wireless WiFi driver for Linux
[ 34.064372] Copyright(c) 2003- 2015 Intel Corporation
[ 34.073281] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 34.080089] AVX2 version of gcm_enc/dec engaged.
[ 34.080090] AES CTR mode by8 optimization enabled
[ 34.092976] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 34.093210] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 34.099073] i2c_hid i2c-DELL0870:00: i2c-DELL0870:00 supply vdd not found, using dummy regulator
[ 34.103138] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 34.133184] intel_rapl: Found RAPL domain package
[ 34.133185] intel_rapl: Found RAPL domain core
[ 34.133186] intel_rapl: Found RAPL domain uncore
[ 34.133187] intel_rapl: Found RAPL domain dram
[ 34.151794] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 34.153923] input: Dell WMI hotkeys as /devices/platform/PNP0C14:05/wmi_bus/wmi_bus-PNP0C14:05/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[ 34.172939] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 34.175093] input: DELL0870:00 06CB:7E92 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DELL0870:00/0018:06CB:7E92.0001/input/input11
[ 34.175147] hid-multitouch 0018:06CB:7E92.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0870:00 06CB:7E92] on i2c-DELL0870:00
[ 34.176773] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 34.179808] [drm] Memory usable by graphics device = 4096M
[ 34.179809] checking generic (80000000 7f0000) vs hw (80000000 10000000)
[ 34.179810] fb: switching to inteldrmfb from EFI VGA
[ 34.179917] Console: switching to colour dummy device 80x25
[ 34.179971] [drm] Replacing VGA console driver
[ 34.185835] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 34.185835] [drm] Driver supports precise vblank timestamp query.
[ 34.187910] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 34.194041] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[ 34.195414] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 34.197368] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 34.197866] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 34.197953] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 34.197976] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input17
[ 34.203388] iwlwifi 0000:00:14.3: loaded firmware version 34.3125811985.0 op_mode iwlmvm
[ 34.223391] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9462, REV=0x318
[ 34.232262] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 34.270649] fbcon: inteldrmfb (fb0) is primary device
[ 34.270693] Console: switching to colour frame buffer device 240x67
[ 34.270709] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 34.277703] iwlwifi 0000:00:14.3: base HW address: f4:d1:08:ac:15:b1
[ 34.314789] nvidia: loading out-of-tree module taints kernel.
[ 34.314794] nvidia: module license 'NVIDIA' taints kernel.
[ 34.314794] Disabling lock debugging due to kernel taint
[ 34.324495] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[ 34.324708] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 34.324892] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 34.325047] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 34.325060] thermal thermal_zone8: failed to read out thermal zone (-61)
[ 34.325739] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[ 34.388764] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3204: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 34.388766] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 34.388767] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 34.388767] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 34.388768] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 34.388769] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 34.388770] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 34.388771] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 34.424377] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 418.43 Tue Feb 19 01:12:11 CST 2019
[ 34.432616] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 418.43 Tue Feb 19 01:05:14 CST 2019
[ 34.433863] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 34.433864] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ 34.450059] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 237
[ 34.478233] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 34.478283] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 34.478367] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 34.478407] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 34.478451] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 34.478489] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 34.480172] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[ 35.054389] media: Linux media interface: v0.10
[ 35.054416] Bluetooth: Core ver 2.22
[ 35.054427] cdc_acm 1-9:1.0: ttyACM0: USB ACM device
[ 35.054428] NET: Registered protocol family 31
[ 35.054429] Bluetooth: HCI device and connection manager initialized
[ 35.054431] Bluetooth: HCI socket layer initialized
[ 35.054432] Bluetooth: L2CAP socket layer initialized
[ 35.054437] Bluetooth: SCO socket layer initialized
[ 35.054858] usbcore: registered new interface driver cdc_acm
[ 35.054858] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 35.059284] Linux video capture interface: v2.00
[ 35.208443] usbcore: registered new interface driver btusb
[ 35.209187] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28c1)
[ 35.209574] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 35.210576] Bluetooth: hci0: Device revision is 2
[ 35.210577] Bluetooth: hci0: Secure boot is enabled
[ 35.210578] Bluetooth: hci0: OTP lock is enabled
[ 35.210578] Bluetooth: hci0: API lock is enabled
[ 35.210579] Bluetooth: hci0: Debug lock is disabled
[ 35.210580] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 35.212118] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
[ 35.216665] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 35.216666] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 35.216667] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 35.216668] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 35.216706] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input24
[ 35.216747] usbcore: registered new interface driver uvcvideo
[ 35.216748] USB Video Class driver (1.1.1)
[ 35.335164] Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k SSFS
[ 35.378703] EXT4-fs (nvme0n1p2): mounting ext2 file system using the ext4 subsystem
[ 35.380523] EXT4-fs (nvme0n1p2): mounted filesystem without journal. Opts: (null)
[ 35.406969] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 35.758382] audit: type=1400 audit(1552343356.062:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=932 comm="apparmor_parser"
[ 35.758462] audit: type=1400 audit(1552343356.062:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=935 comm="apparmor_parser"
[ 35.758464] audit: type=1400 audit(1552343356.062:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=933 comm="apparmor_parser"
[ 35.758744] audit: type=1400 audit(1552343356.062:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=931 comm="apparmor_parser"
[ 35.758746] audit: type=1400 audit(1552343356.062:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=931 comm="apparmor_parser"
[ 35.758747] audit: type=1400 audit(1552343356.062:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=931 comm="apparmor_parser"
[ 35.759496] audit: type=1400 audit(1552343356.062:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=928 comm="apparmor_parser"
[ 35.759498] audit: type=1400 audit(1552343356.062:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser"
[ 35.759499] audit: type=1400 audit(1552343356.062:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=928 comm="apparmor_parser"
[ 35.759500] audit: type=1400 audit(1552343356.062:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser"
[ 35.804427] [drm] RC6 on
[ 35.835702] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.835703] Bluetooth: BNEP filters: protocol multicast
[ 35.835706] Bluetooth: BNEP socket layer initialized
[ 36.048287] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 36.106772] r8169 0000:03:00.0 enp3s0: link down
[ 36.106864] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 36.108945] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 36.280430] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
[ 36.282776] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 36.349723] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 36.434382] Bluetooth: hci0: Waiting for firmware download to complete
[ 36.434529] Bluetooth: hci0: Firmware loaded in 1197348 usecs
[ 36.434566] Bluetooth: hci0: Waiting for device to boot
[ 36.447571] Bluetooth: hci0: Device booted in 12719 usecs
[ 36.447781] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[ 36.450599] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 37.664159] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000FF) is beyond end of object (length 0x11) (20170831/exoparg2-430)
[ 37.664175] No Local Variables are initialized for Method [GINF]
[ 37.664177] Initialized Arguments for Method [GINF]: (2 arguments defined for method invocation)
[ 37.664177] Arg0: 00000000a68b8d6b <Obj> Integer 00000000000000FF
[ 37.664180] Arg1: 000000007db759a7 <Obj> Integer 0000000000000000
[ 37.664184] ACPI Error: Method parse/execution failed \_SB.GINF, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[ 37.664189] ACPI Error: Method parse/execution failed \_SB.GADR, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[ 37.664192] ACPI Error: Method parse/execution failed \_SB.SGOV, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[ 37.664195] ACPI Error: Method parse/execution failed \_SB.CGWR, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[ 37.664199] ACPI Error: Method parse/execution failed \_SB.TBFP, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[ 37.664202] ACPI Error: Method parse/execution failed \_SB.WMTF.WMTF, AE_AML_PACKAGE_LIMIT (20170831/psparse-550)
[ 39.746250] wlo1: authenticate with b4:ee:b4:6e:90:47
[ 39.753931] wlo1: send auth to b4:ee:b4:6e:90:47 (try 1/3)
[ 39.774804] wlo1: authenticated
[ 39.776060] wlo1: associate with b4:ee:b4:6e:90:47 (try 1/3)
[ 39.779958] wlo1: RX AssocResp from b4:ee:b4:6e:90:47 (capab=0x11 status=0 aid=6)
[ 39.781708] wlo1: associated
[ 39.798499] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by b4:ee:b4:6e:90:47
[ 39.858171] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 48.420920] Bluetooth: RFCOMM TTY layer initialized
[ 48.420925] Bluetooth: RFCOMM socket layer initialized
[ 48.420928] Bluetooth: RFCOMM ver 1.11
[ 49.049137] rfkill: input handler disabled
[ 50.717367] kauditd_printk_skb: 45 callbacks suppressed
[ 50.717368] audit: type=1400 audit(1552343371.022:57): apparmor="DENIED" operation="open" profile="snap.plexmediaserver.plexmediaserver" name="/sys/bus/usb/devices/" pid=1809 comm=506C65782054756E65722053657276 requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 50.717504] audit: type=1400 audit(1552343371.022:58): apparmor="DENIED" operation="open" profile="snap.plexmediaserver.plexmediaserver" name="/sys/bus/usb/devices/" pid=1809 comm=506C65782054756E65722053657276 requested_mask="r" denied_mask="r" fsuid=0 ouid=0
loris@loris-G3-3779:~$ Hors ligne
#14 Le 12/03/2019, à 08:38
- moko138
Re : [résolu] boot plus lent après installation 18.04
lorismazza a écrit :
[ 2.426961] usbcore: registered new interface driver rtsx_usb [ 33.542155] EXT4-fs (dm-0) [ 35.335164] Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k SSFS [ 35.378703] EXT4-fs (nvme0n1p2): mounting ext2 file system using the ext4 subsystem [ 35.380523] EXT4-fs (nvme0n1p2): mounted filesystem without journal. Opts: (null) [ 35.406969] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Merci de montrer
cat /etc/fstab | grep -A77 dump
EDIT :
tail -n +7 /etc/fstabMerci nany !
Dernière modification par moko138 (Le 12/03/2019, à 13:11)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#15 Le 12/03/2019, à 11:39
- nany
Re : [résolu] boot plus lent après installation 18.04
@moko138 : encore une fois, pourquoi ce cat pipe grep ?
grep -A77 dump /etc/fstabMais je ne vois pas l’utilité réel de ce grep. À la limite, si on veut vraiment effacer les premières lignes (m’enfin pourquoi les effacer au juste ?), on peux faire :
tail -n +7 /etc/fstabHors ligne
#16 Le 12/03/2019, à 13:19
- moko138
Re : [résolu] boot plus lent après installation 18.04
nany a écrit :
encore une fois, pourquoi ce cat pipe grep ?
Tu as bien sûr raison, ça m'est revenu après : là, avant-dernière commande.
J'ai édité mon premier message. 
"pourquoi les effacer ?"
- Pour la concision de la sortie, tout simplement.
Je ne connaissais pas l'usage du "+" derrière "tail -n" :
c'est super, ton truc !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#17 Le 12/03/2019, à 18:55
- lorismazza
Re : [résolu] boot plus lent après installation 18.04
Bonjour,
Voici le retour de la commande :
loris@loris-G3-3779:~$ tail -n +7 /etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/ubuntu--vg-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/nvme0n1p2 during installation
UUID=fb7f2945-6350-43e7-9b5e-19ff15a3ca98 /boot ext2 defaults 0 2
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=01C9-0605 /boot/efi vfat umask=0077 0 1
/dev/mapper/ubuntu--vg-swap_1 none swap sw 0 0
/dev/disk/by-uuid/835070e7-9fdf-4c45-8491-2caa07e937b7 /mnt/835070e7-9fdf-4c45-8491-2caa07e937b7 auto nosuid,nodev,nofail,x-gvfs-show 0 0
loris@loris-G3-3779:~$ Un grand merci de prendre le temps d'essayer de trouver ce qui cloche. J'avoue que je suis totalement novice et que je sais pas du tout comprendre toutes les lignes que donnent les commandes.
Hors ligne
#18 Le 13/03/2019, à 11:11
- nany
Re : [résolu] boot plus lent après installation 18.04
Bon j’ignore ce que moko138 voudrait faire mais, en attendant qu’il revienne, donne le retour de :
blkidHors ligne
#19 Le 13/03/2019, à 12:50
- moko138
Re : [résolu] boot plus lent après installation 18.04
nany a écrit :
j’ignore ce que moko138 voudrait faire
Rien. De toute façon, tu as la main et tu es beaucoup plus compétent que moi.
Mais je sais maintenant que ce LVM n'est pas chiffré.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#20 Le 13/03/2019, à 13:18
- lorismazza
Re : [résolu] boot plus lent après installation 18.04
Bonjour,
Voici ce que donne blkid :
loris@loris-G3-3779:~$ blkid
/dev/nvme0n1p1: UUID="01C9-0605" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="1ac4c6b3-785e-44d9-81cf-3e128e4a1df5"
/dev/nvme0n1p2: UUID="fb7f2945-6350-43e7-9b5e-19ff15a3ca98" TYPE="ext2" PARTUUID="ffdefa2f-18f0-4ebd-940b-750514006e79"
/dev/nvme0n1p3: UUID="szWHJs-gsB2-fI5P-4cpC-iQAR-b7c4-jWgyDK" TYPE="LVM2_member" PARTUUID="62b77fce-a82a-4969-99e3-01a774220b0d"
/dev/sda1: LABEL="data" UUID="835070e7-9fdf-4c45-8491-2caa07e937b7" TYPE="ext4" PARTUUID="13940f81-5da9-4890-a6f8-97213bd01693"
/dev/mapper/ubuntu--vg-root: UUID="a2fb424f-fec8-4cb3-b915-a76d137e6031" TYPE="ext4"Hors ligne
#21 Le 13/03/2019, à 14:24
- nany
Re : [résolu] boot plus lent après installation 18.04
Donne le retour de :
ls /etc/initramfs-tools/conf.dHors ligne
#22 Le 13/03/2019, à 21:08
- lorismazza
Re : [résolu] boot plus lent après installation 18.04
nany a écrit :
Donne le retour de :
ls /etc/initramfs-tools/conf.d
Bonsoir,
J'ai copié la ligne de commande dans mon terminal mais ça ne me donne rien en retour (juste un "resume").
Hors ligne
#23 Le 13/03/2019, à 21:12
- nany
Re : [résolu] boot plus lent après installation 18.04
resume, c’est justement ce que je souhaitais voir. 
Donne maintenant le retour de :
cat /etc/initramfs-tools/conf.d/resumeHors ligne
#24 Le 13/03/2019, à 21:19
- lorismazza
Re : [résolu] boot plus lent après installation 18.04
Voilà...
RESUME=UUID=47b699fc-7c47-4485-a532-6863797e98b9Hors ligne
#25 Le 13/03/2019, à 21:27
- nany
Re : [résolu] boot plus lent après installation 18.04
Ok, alors donne les retours de :
echo "RESUME=none" | sudo tee /etc/initramfs-tools/conf.d/resumesudo update-initramfs -u -k allPuis redémarre et donne le retour de :
systemd-analyzeHors ligne