#1 Le 22/08/2007, à 15:02
- ahsid
[résolu]webcam integrée 0c45:62c0 Microdia
salut,
J'ai un pc hp dv 6000 avec une webcam integrée, je me demandais si il existait un driver pour la faire fonctionner. Lorsque je lance un conversation webcam via Amsn, le voyant s'allume sur ma webcam mais je n'envoi pas d'image.
Si quelqu'un voit comment bidouiller pour faire en sorte que ça fonctionne, merci d'avance. Si vous avez besoin de plus de détails, je n'y vois pas d'objection seulement je ne sais pas comment savoir quel est le modèle de ma webcam....
Dernière modification par ahsid (Le 02/03/2008, à 12:38)
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#2 Le 22/08/2007, à 15:41
- tshirtman
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Bonjour.
généralement un "lspci" ou "lsusb", te permet de trouver quel est ton materiel. Le fait que le voyant s'allume est plutot bon signe, ça veut dire qu'elle est reconnus, par contre il se peut que le pilote demande un réglage. mais avec le nom du model on devrait trouver facilement (google 
)
Hors ligne
#3 Le 22/08/2007, à 23:33
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
après un lsusb :
Bus 005 Device 002: ID 0c45:62c0 MicrodiaJ'ai suivi le tuto de la doc pour l"installer mais sans succès.
http://doc.ubuntu-fr.org/sonix_webcam?s=webcam
la lumiere ne s'allume même plus lorsque je fais une tentative avec kopete.
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#4 Le 23/08/2007, à 01:22
- Kanor
Re : [résolu]webcam integrée 0c45:62c0 Microdia
donne le retour de dmesg quand tu le branche
essaye avec camorama ekiga et amsn
Hors ligne
#5 Le 23/08/2007, à 12:43
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Voilà un dmesg:
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fd70000 end: 000000003fe70000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fe70000 size: 0000000000090000 end: 000000003ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
[ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7d10
[ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261744
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261744
[ 0.000000] On node 0 totalpages: 261744
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 252 pages used for memmap
[ 0.000000] HighMem zone: 32116 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v002 HP ) @ 0x000f7c60
[ 0.000000] ACPI: XSDT (v001 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000000) @ 0x3fe7b3d3
[ 0.000000] ACPI: FADT (v003 INTEL CALISTGA 0x06040000 ALAN 0x00000001) @ 0x3fe83bf8
[ 0.000000] ACPI: MADT (v001 HP 30BC 0x06040000 LOHR 0x0000005a) @ 0x3fe83cec
[ 0.000000] ACPI: HPET (v001 HP 30BC 0x06040000 LOHR 0x0000005a) @ 0x3fe83d54
[ 0.000000] ACPI: MCFG (v001 HP 30BC 0x06040000 LOHR 0x0000005a) @ 0x3fe83d8c
[ 0.000000] ACPI: TCPA (v001 HP 30BB 0x06040000 PTL 0x00000001) @ 0x3fe83dc8
[ 0.000000] ACPI: MADT (v001 HP 30BC 0x06040000 LTP 0x00000000) @ 0x3fe83dfa
[ 0.000000] ACPI: BOOT (v001 HP 30BC 0x06040000 LTP 0x00000001) @ 0x3fe83e62
[ 0.000000] ACPI: SLIC (v001 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000001) @ 0x3fe83e8a
[ 0.000000] ACPI: SSDT (v001 HP 30BC 0x00001000 INTL 0x20050624) @ 0x3fe7c489
[ 0.000000] ACPI: SSDT (v001 HP 30BC 0x00003000 INTL 0x20050624) @ 0x3fe7b9e3
[ 0.000000] ACPI: SSDT (v001 HP 30BC 0x00003000 INTL 0x20050624) @ 0x3fe7b93d
[ 0.000000] ACPI: SSDT (v001 HP 30BC 0x00003000 INTL 0x20050624) @ 0x3fe7b457
[ 0.000000] ACPI: DSDT (v001 HP 30BC 0x06040000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: 2 duplicate APIC table ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Detected 1729.723 MHz processor.
[ 29.086375] Built 1 zonelists. Total pages: 259700
[ 29.086379] Kernel command line: root=UUID=ab05c86f-7e56-4efb-b130-245c557cce9a ro quiet splash
[ 29.086514] mapped APIC to ffffd000 (fee00000)
[ 29.086517] mapped IOAPIC to ffffc000 (fec00000)
[ 29.086519] Enabling fast FPU save and restore... done.
[ 29.086522] Enabling unmasked SIMD FPU exception support... done.
[ 29.086529] Initializing CPU#0
[ 29.086601] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 29.089051] Console: colour VGA+ 80x25
[ 29.089381] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 29.089698] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 29.114102] Memory: 1026796k/1046976k available (1992k kernel code, 19504k reserved, 900k data, 328k init, 129472k highmem)
[ 29.114110] virtual kernel memory layout:
[ 29.114111] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 29.114112] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 29.114113] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 29.114114] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 29.114115] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 29.114116] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 29.114117] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 29.114120] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 29.114283] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 29.114288] hpet0: 3 64-bit timers, 14318180 Hz
[ 29.115295] Using HPET for base-timer
[ 29.194278] Calibrating delay using timer specific routine.. 3463.04 BogoMIPS (lpj=6926096)
[ 29.194315] Security Framework v1.0.0 initialized
[ 29.194319] SELinux: Disabled at boot.
[ 29.194332] Mount-cache hash table entries: 512
[ 29.194450] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 29.194457] monitor/mwait feature present.
[ 29.194459] using mwait in idle threads.
[ 29.194463] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 29.194465] CPU: L2 cache: 2048K
[ 29.194468] CPU: Physical Processor ID: 0
[ 29.194469] CPU: Processor Core ID: 0
[ 29.194471] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 29.194479] Compat vDSO mapped to ffffe000.
[ 29.194482] Remapping vsyscall page to ffffe000
[ 29.194493] Checking 'hlt' instruction... OK.
[ 29.210364] SMP alternatives: switching to UP code
[ 29.210682] Early unpacking initramfs... done
[ 29.516567] ACPI: Core revision 20060707
[ 29.516857] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 29.522891] CPU0: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz stepping 02
[ 29.522911] SMP alternatives: switching to SMP code
[ 29.522997] Booting processor 1/1 eip 3000
[ 29.533438] Initializing CPU#1
[ 29.614226] Calibrating delay using timer specific routine.. 3459.13 BogoMIPS (lpj=6918263)
[ 29.614232] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 29.614237] monitor/mwait feature present.
[ 29.614240] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 29.614242] CPU: L2 cache: 2048K
[ 29.614244] CPU: Physical Processor ID: 0
[ 29.614245] CPU: Processor Core ID: 1
[ 29.614246] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 29.614737] CPU1: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz stepping 02
[ 29.614759] Total of 2 processors activated (6922.17 BogoMIPS).
[ 29.614958] ENABLING IO-APIC IRQs
[ 29.615160] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 29.762209] checking TSC synchronization across 2 CPUs: passed.
[ 0.003998] Brought up 2 CPUs
[ 0.144266] migration_cost=50
[ 0.144522] Booting paravirtualized kernel on bare hardware
[ 0.144624] Time: 22:03:24 Date: 07/22/107
[ 0.144653] NET: Registered protocol family 16
[ 0.144735] EISA bus registered
[ 0.144741] ACPI: bus type pci registered
[ 0.144859] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
[ 0.144861] PCI: Using configuration type 1
[ 0.144863] Setting up standard PCI resources
[ 0.148509] ACPI: Interpreter enabled
[ 0.148511] ACPI: Using IOAPIC for interrupt routing
[ 0.150038] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.150045] PCI: Probing PCI hardware (bus 00)
[ 0.151724] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.151729] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.152034] Boot video device is 0000:01:00.0
[ 0.153208] PCI: Transparent bridge - 0000:00:1e.0
[ 0.153300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.159705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.160588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.160804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.161033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.161850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.162377] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.162637] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
[ 0.162898] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
[ 0.163158] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
[ 0.163415] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 0.163674] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 0.163933] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 0.164202] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[ 0.165450] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.165460] pnp: PnP ACPI init
[ 0.167898] pnp: PnP ACPI: found 11 devices
[ 0.167902] PnPBIOS: Disabled by ACPI PNP
[ 0.167946] PCI: Using ACPI for IRQ routing
[ 0.167948] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.196923] NET: Registered protocol family 8
[ 0.196925] NET: Registered protocol family 20
[ 0.197238] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.197241] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.197547] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[ 0.197613] PCI: Bridge: 0000:00:01.0
[ 0.197614] IO window: disabled.
[ 0.197618] MEM window: dc000000-ddffffff
[ 0.197622] PREFETCH window: c0000000-cfffffff
[ 0.197626] PCI: Bridge: 0000:00:1c.0
[ 0.197629] IO window: 2000-2fff
[ 0.197635] MEM window: d8000000-d9ffffff
[ 0.197640] PREFETCH window: d2000000-d3ffffff
[ 0.197646] PCI: Bridge: 0000:00:1c.1
[ 0.197649] IO window: 3000-3fff
[ 0.197655] MEM window: d6000000-d7ffffff
[ 0.197660] PREFETCH window: d0000000-d1ffffff
[ 0.197666] PCI: Bridge: 0000:00:1c.2
[ 0.197669] IO window: 4000-4fff
[ 0.197675] MEM window: da000000-dbffffff
[ 0.197680] PREFETCH window: d4000000-d5ffffff
[ 0.197687] PCI: Bridge: 0000:00:1e.0
[ 0.197688] IO window: disabled.
[ 0.197694] MEM window: de000000-de0fffff
[ 0.197699] PREFETCH window: disabled.
[ 0.197716] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.197721] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.197746] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.197752] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.197775] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
[ 0.197781] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.197807] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.197812] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.197824] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[ 0.197831] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.197857] NET: Registered protocol family 2
[ 0.252012] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.252118] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.252609] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.252869] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.252872] TCP reno registered
[ 0.268084] checking if image is initramfs... it is
[ 0.870795] Freeing initrd memory: 6781k freed
[ 0.870984] Simple Boot Flag at 0x35 set to 0x1
[ 0.871444] audit: initializing netlink socket (disabled)
[ 0.871463] audit(1187820204.600:1): initialized
[ 0.871563] highmem bounce pool size: 64 pages
[ 0.871653] VFS: Disk quotas dquot_6.5.1
[ 0.871672] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.871724] io scheduler noop registered
[ 0.871726] io scheduler anticipatory registered
[ 0.871728] io scheduler deadline registered
[ 0.871739] io scheduler cfq registered (default)
[ 0.872012] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.872053] assign_interrupt_mode Found MSI capability
[ 0.872056] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.872152] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.872213] assign_interrupt_mode Found MSI capability
[ 0.872215] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.872251] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.872377] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.872439] assign_interrupt_mode Found MSI capability
[ 0.872441] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.872471] Allocate Port Service[0000:00:1c.1:pcie02]
[ 0.872598] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.872658] assign_interrupt_mode Found MSI capability
[ 0.872661] Allocate Port Service[0000:00:1c.2:pcie00]
[ 0.872691] Allocate Port Service[0000:00:1c.2:pcie02]
[ 0.872876] isapnp: Scanning for PnP cards...
[ 1.226779] isapnp: No Plug & Play device found
[ 1.246897] Real Time Clock Driver v1.12ac
[ 1.246959] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.247549] mice: PS/2 mouse device common for all mice
[ 1.248100] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.248319] input: Macintosh mouse button emulation as /class/input/input0
[ 1.248352] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.248356] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.248644] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.265897] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.265900] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.266949] EISA: Probing bus 0 at eisa.0
[ 1.266958] Cannot allocate resource for EISA slot 1
[ 1.266961] Cannot allocate resource for EISA slot 2
[ 1.266963] Cannot allocate resource for EISA slot 3
[ 1.266965] Cannot allocate resource for EISA slot 4
[ 1.266984] EISA: Detected 0 cards.
[ 1.297078] TCP cubic registered
[ 1.297088] NET: Registered protocol family 1
[ 1.297110] Starting balanced_irq
[ 1.297116] Using IPI No-Shortcut mode
[ 1.297190] ACPI: (supports S0 S3 S4 S5)
[ 1.297228] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.297237] Magic number: 3:513:98
[ 1.297522] Freeing unused kernel memory: 328k freed
[ 1.299842] Time: tsc clocksource has been installed.
[ 2.490634] Capability LSM initialized
[ 2.527240] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [30BC ] [20060707]
[ 2.527466] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [30BC ] [20060707]
[ 2.528008] Monitor-Mwait will be used to enter C-1 state
[ 2.528010] Monitor-Mwait will be used to enter C-2 state
[ 2.528013] Monitor-Mwait will be used to enter C-3 state
[ 2.528019] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.528023] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.528499] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [30BC ] [20060707]
[ 2.528687] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [30BC ] [20060707]
[ 2.529264] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.529270] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.080000] ACPI: Thermal Zone [THR1] (38 C)
[ 3.084000] Time: hpet clocksource has been installed.
[ 3.432000] usbcore: registered new interface driver usbfs
[ 3.432000] usbcore: registered new interface driver hub
[ 3.432000] usbcore: registered new device driver usb
[ 3.440000] USB Universal Host Controller Interface driver v3.0
[ 3.440000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.440000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.440000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.440000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.440000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[ 3.440000] usb usb1: configuration #1 chosen from 1 choice
[ 3.440000] hub 1-0:1.0: USB hub found
[ 3.440000] hub 1-0:1.0: 2 ports detected
[ 3.440000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 3.440000] Copyright (c) 1999-2006 Intel Corporation.
[ 3.460000] SCSI subsystem initialized
[ 3.488000] ieee1394: Initialized config rom entry `ip1394'
[ 3.492000] libata version 2.20 loaded.
[ 3.544000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
[ 3.544000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.544000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.544000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.544000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[ 3.544000] usb usb2: configuration #1 chosen from 1 choice
[ 3.544000] hub 2-0:1.0: USB hub found
[ 3.544000] hub 2-0:1.0: 2 ports detected
[ 3.648000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.648000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.648000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.648000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.648000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 3.648000] usb usb3: configuration #1 chosen from 1 choice
[ 3.648000] hub 3-0:1.0: USB hub found
[ 3.648000] hub 3-0:1.0: 2 ports detected
[ 3.752000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.752000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.752000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.752000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.752000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 3.752000] usb usb4: configuration #1 chosen from 1 choice
[ 3.752000] hub 4-0:1.0: USB hub found
[ 3.752000] hub 4-0:1.0: 2 ports detected
[ 3.856000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 3.856000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 3.912000] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1b:24:0c:5f:4c
[ 3.972000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.972000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.972000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.972000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.972000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.972000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.972000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.972000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
[ 3.976000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.976000] usb usb5: configuration #1 chosen from 1 choice
[ 3.976000] hub 5-0:1.0: USB hub found
[ 3.976000] hub 5-0:1.0: 8 ports detected
[ 4.080000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 4.080000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.080000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 4.080000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14
[ 4.080000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15
[ 4.080000] scsi0 : ata_piix
[ 4.320000] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 4.400000] ata1.00: ATAPI, max MWDMA2
[ 4.460000] usb 5-4: configuration #1 chosen from 1 choice
[ 4.564000] ata1.00: configured for MWDMA2
[ 4.564000] scsi1 : ata_piix
[ 4.564000] ata2: port disabled. ignoring.
[ 4.564000] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-851S 1.50 PQ: 0 ANSI: 5
[ 4.568000] ahci 0000:00:1f.2: version 2.1
[ 4.568000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 20
[ 5.572000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.572000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 5.572000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 5.572000] ata3: SATA max UDMA/133 cmd 0xf8900500 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.572000] ata4: SATA max UDMA/133 cmd 0xf8900580 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.572000] ata5: SATA max UDMA/133 cmd 0xf8900600 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.572000] ata6: SATA max UDMA/133 cmd 0xf8900680 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.572000] scsi2 : ahci
[ 6.056000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.056000] ata3.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max UDMA/100
[ 6.056000] ata3.00: 312581808 sectors, multi 16: LBA48
[ 6.056000] ata3.00: configured for UDMA/100
[ 6.056000] scsi3 : ahci
[ 6.368000] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.368000] scsi4 : ahci
[ 6.680000] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.680000] scsi5 : ahci
[ 6.992000] ata6: SATA link down (SStatus 0 SControl 0)
[ 6.992000] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 04.0 PQ: 0 ANSI: 5
[ 6.992000] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.992000] PCI: Setting latency timer of device 0000:07:05.0 to 64
[ 7.044000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 7.044000] sda: Write Protect is off
[ 7.044000] sda: Mode Sense: 00 3a 00 00
[ 7.044000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.044000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 7.044000] sda: Write Protect is off
[ 7.044000] sda: Mode Sense: 00 3a 00 00
[ 7.044000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.044000] sda:<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 7.056000] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.056000] Uniform CD-ROM driver Revision: 3.20
[ 7.056000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 7.088000] sda1 sda2 < sda5 >
[ 7.108000] sd 2:0:0:0: Attached scsi disk sda
[ 7.112000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 7.112000] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.324000] kjournald starting. Commit interval 5 seconds
[ 7.324000] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.320000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0003b20700]
[ 16.212000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.212000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.268000] intel_rng: FWH not detected
[ 16.324000] sdhci: Secure Digital Host Controller Interface driver
[ 16.324000] sdhci: Copyright(c) Pierre Ossman
[ 16.324000] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[ 16.324000] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
[ 16.324000] ACPI: PCI Interrupt 0000:07:05.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 16.324000] PCI: Setting latency timer of device 0000:07:05.1 to 64
[ 16.324000] mmc0: SDHCI at 0xde000800 irq 17 DMA
[ 16.340000] iTCO_vendor_support: vendor-support=0
[ 16.340000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 16.340000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.340000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.412000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.412000] agpgart: Detected an Intel 945GM Chipset.
[ 16.444000] agpgart: AGP aperture is 256M @ 0x0
[ 16.612000] ieee80211_crypt: registered algorithm 'NULL'
[ 16.620000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 16.620000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 16.720000] Linux video capture interface: v2.00
[ 16.752000] nvidia: module license 'NVIDIA' taints kernel.
[ 17.004000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.004000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 17.004000] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
[ 17.020000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[ 17.020000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 17.020000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.020000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 17.024000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 17.100000] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 17.100000] usbcore: registered new interface driver uvcvideo
[ 17.100000] USB Video Class driver (v0.1.0)
[ 17.120000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 17.120000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 17.628000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 17.692000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 17.868000] lp: driver loaded but no devices found
[ 18.028000] EXT3 FS on sda1, internal journal
[ 18.192000] kjournald starting. Commit interval 5 seconds
[ 18.192000] EXT3 FS on sda5, internal journal
[ 18.192000] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.992000] ipw3945: Max thermal spin reached
[ 18.992000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 19.556000] NET: Registered protocol family 17
[ 20.056000] No dock devices found.
[ 20.096000] ACPI: AC Adapter [ACAD] (off-line)
[ 20.132000] ibm_acpi: ec object not found
[ 20.160000] input: Power Button (FF) as /class/input/input3
[ 20.160000] ACPI: Power Button (FF) [PWRF]
[ 20.160000] input: Power Button (CM) as /class/input/input4
[ 20.160000] ACPI: Power Button (CM) [PWRB]
[ 20.160000] input: Sleep Button (CM) as /class/input/input5
[ 20.160000] ACPI: Sleep Button (CM) [SLPB]
[ 20.160000] input: Lid Switch as /class/input/input6
[ 20.160000] ACPI: Lid Switch [LID]
[ 20.292000] ACPI: Battery Slot [BAT0] (battery present)
[ 20.352000] Using specific hotkey driver
[ 20.396000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.396000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.404000] wmi_add device=c1904c00
[ 20.404000] calling WQBA
[ 20.424000] pcc_acpi: loading...
[ 24.072000] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22
[ 24.076000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[ 24.076000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 24.276000] ppdev: user-space parallel port driver
[ 24.888000] apm: BIOS not found.
[ 25.440000] Bluetooth: Core ver 2.11
[ 25.440000] NET: Registered protocol family 31
[ 25.440000] Bluetooth: HCI device and connection manager initialized
[ 25.440000] Bluetooth: HCI socket layer initialized
[ 25.456000] Bluetooth: L2CAP ver 2.8
[ 25.456000] Bluetooth: L2CAP socket layer initialized
[ 25.624000] Bluetooth: RFCOMM socket layer initialized
[ 25.624000] Bluetooth: RFCOMM TTY layer initialized
[ 25.624000] Bluetooth: RFCOMM ver 1.8
[ 28.208000] NET: Registered protocol family 10
[ 28.208000] lo: Disabled Privacy Extensions
[ 39.408000] eth0: no IPv6 routers present
[ 79.492000] ipw3945: Error sending LEDS_CMD: time out after 500ms.
[ 80.268000] ipw3945: Max thermal spin reached
[ 80.268000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 140.744000] ipw3945: Max thermal spin reached
[ 140.744000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 201.220000] ipw3945: Max thermal spin reached
[ 201.220000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 261.596000] ipw3945: Max thermal spin reached
[ 261.596000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 322.072000] ipw3945: Max thermal spin reached
[ 322.072000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 382.440000] ipw3945: Radio Frequency Kill Switch is On:
[ 382.440000] Kill switch must be turned off for wireless networking to work.
[ 8428.220000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 8428.640000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[12254.120000] atkbd.c: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[12254.120000] atkbd.c: Use 'setkeycodes e058 <keycode>' to make it known.J'ai essayé ave ekiga,
Error while opening video device USB 2.0 Camera
A moving logo will be transmitted during calls. Notice that you can always transmit a given image or the moving logo by choosing "Picture" as video plugin and "MovingLogo" or "StaticPicture" as device.
Your video driver doesn't support the requested video format.pareille pour camorama, ça ne fonctionne pas il me dit qu'il ne peut se connecter à la webcam /dev/video0 et avec amsn le voyant s'allume mais aucune image n'est transmise.
Dernière modification par ahsid (Le 23/08/2007, à 13:23)
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#6 Le 23/08/2007, à 13:40
- Kanor
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Est ce ta webcam eétait bien branché quand tu a tapé ta commande je ne vois pas dans les différente ligne
Hors ligne
#7 Le 23/08/2007, à 14:10
- freechelmi
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Salut , plutot cool elle est reconnu par UVC :
[ 17.100000] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 17.100000] usbcore: registered new interface driver uvcvideo
[ 17.100000] USB Video Class driver (v0.1.0)Dans Ekiga , tu as essayé de l'ouvrir en V4l2 ?
test avec luvcview, tu devrais au moins avoir l'image.
Dernière modification par freechelmi (Le 23/08/2007, à 14:13)
Hors ligne
#8 Le 23/08/2007, à 14:15
- Kanor
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Salut freechelmi
je suis aveugle ...:/
Hors ligne
#9 Le 26/08/2007, à 19:27
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Salut,
Ekiga ne me propose que le V4L pas V4l2. Et je n' arrive pas à faire marcher luvcview ça me répond :
luvcview
luvcview version 0.2.1
Video driver: x11
A window manager is available
video /dev/video0
Unable to set format: 22.
Init v4L2 failed !! exit fataOpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#10 Le 26/08/2007, à 20:48
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Bon j'ai suivi un tuto sur ubuntuforums
http://ubuntuforums.org/showthread.php?t=512059
et là c'est dejà mieux j'arrive à me voir avec gstreamer (j'ai du télécharger gnome-media qui m'a viré luvcvideo), mais ça ne marche toujours pas mieux avec ekiga ou amsn.
Dernière modification par ahsid (Le 26/08/2007, à 20:49)
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#11 Le 27/08/2007, à 12:53
- nouira
Re : [résolu]webcam integrée 0c45:62c0 Microdia
bonjour,j'ai un MP4 qui a une caméra alors est ce que je peu remplacé le webcam avec le MP4 et faire une conversation avec ??? 
:):D
Hors ligne
#12 Le 27/08/2007, à 13:37
- freechelmi
Re : [résolu]webcam integrée 0c45:62c0 Microdia
nouira a écrit :
bonjour,j'ai un MP4 qui a une caméra alors est ce que je peu remplacé le webcam avec le MP4 et faire une conversation avec ???
Si tu ne donnes pas plus de precisions on ne pourra pas t'aider ...
Hors ligne
#13 Le 30/08/2007, à 17:44
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Un ptit up pour ma webcam.....
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#14 Le 14/09/2007, à 20:52
- ERICIGOR
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Pour les webcam voici les pilotes à installer depuis Synaptics
pwc-source
spca5xx-source
qc-usb-source
ov511-source
gspca-source
checkpw
setpwc
mpqc-support
qc-usb-utils
gqcam
qcam
libvideo-ivtv-perl
Je suis trés content j'ai 4 sortes de Webcam Nickel-chrome tout fonctionne
attention à ne pas brancher 2 Webcams en même temps il y en a au moins une
qui fonctionnera lors de l'installation.
Regarde bien si ton portable n'est pas doté d'une Webcam intégrée.
Salut !
Hors ligne
#15 Le 25/09/2007, à 12:38
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Merci.... mais comme je le dis dans le titre... j'ai bien une webcam integrée 
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#16 Le 25/09/2007, à 13:10
- freechelmi
Re : [résolu]webcam integrée 0c45:62c0 Microdia
ahsid a écrit :
Merci.... mais comme je le dis dans le titre... j'ai bien une webcam integrée
intégré ou pas , ça ne changes rien.
Ta webcam utilise le driver UVC , si l'installation de la version courante n'as pas suffit , il faudrait installé une version plus récente.
En tous cas ocmme déjà dit , ta webcam est officielement supporté par UVC :
http://linux-uvc.berlios.de/
Donc elle devrait fonctionné sans problème.
Si tu n'es pas très habile avec la console, passes ton chemin sinon :
sudo apt-get install subversion build-essential linux-headers-$(uname -r) &&
svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk &&
cd trunk &&
make &&
sudo install -v -m644 uvcvideo.ko /lib/modules/$(uname -r)/kernel/ubuntu/media/usbvideo/uvcvideo.ko &&
sudo depmod -aeje n'ai pas trouvé les details pour l'install de la SVN de UVC sur le wiki ?
Hors ligne
#17 Le 25/09/2007, à 13:24
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
freechelmi j'ai deja installé les driver uvc en svn mais ça ne fonctionne pas lol je suis aller sur leur site et ils reconnaissent le beug avec le 2.6.18. Avant ça marchait sous edgy et dapper. Là j'utilise le 2.6.21 (lenny) et ça ne fonctionne toujours pas. Si je demande une solution c'est au cas où quelqu'un aurait trouvé un moyen de contourner ce problème.
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#18 Le 25/09/2007, à 13:37
- freechelmi
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Ha , je comprends mieux
Bon je ne savais pas trop quel était ton niveau donc bon ... Si les Devs UVC ne peuvent rien , il faut que Microdia fournisse un patch !:mad:
Hors ligne
#19 Le 26/09/2007, à 11:21
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Bon bin ça fonctionne!!!! j'ai installé la version 0.97 release candidate de Amsn et hop ça fonctionne, bon l'image est assez laide, mais c'est deja ça!
Je précise pour les personnes qui cherchent à faire fonctionner cette webcam que je suis sous 2.6.21 (debian testing).
En tout cas ça ne venait pas des drivers uvc mais des logiciels (AMsn 0.93 par ex).
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#20 Le 26/09/2007, à 11:27
- freechelmi
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Bon il faut que tu nous explique :
UVC ne fait que V4l2 , Asmn j'en sais rien mais ekiga ( quelle version utilise tu ? ) fais du V4L2 , je l'utilise avec l'Isight .
Donc si tu peux mettre la dernière version d'ekiga et nous confirmer que ça marche ...
Hors ligne
#21 Le 26/09/2007, à 17:02
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
BOn on va structurer tout ça :
d'abord j'ai installé les drivers uvc en suivant le tuto dans la doc
Ensuite pour ce qui est des programmes:
-Amsn 0.93 : ça marche pas (selon mes souvenirs il me disait que le support pour V4L2 n'était pas installé mais je n'ai jamais trouvé quoi installer); si je lance une conversation webcam la led bleue de ma webcam s'allume mais aucune image n'apparraît.
-Amsn 0.97 rc1 : ça fonctionne directement
-kopete (version actuelle) : j'ai un écran vert dans le panneau de configuration de la webcam, il me propose "usb 2 camera" mais je ne peut choisir de driver etc... sinon kopete plante et disparait.
-Pour ce qui est du teste de ekiga je ferai ça ce soir parce que là je suis au boulot
En tout cas la version que j'ai installé depuis les dépôts "testing" ne me proposait pas V4L2.
Dernière modification par ahsid (Le 26/09/2007, à 17:09)
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#22 Le 26/09/2007, à 17:06
- freechelmi
Re : [résolu]webcam integrée 0c45:62c0 Microdia
ahsid a écrit :
En tout cas la version que j'ai installé depuis les dépôts "testing" ne me proposait pas V4L2, alors que j'ai lu sur plein de sujet qu'il était compatible.
Enfin on verra ce soir.
Tu veux dire la version de Ekiga ? T as pas la 2.0.9 ?
http://ekiga.org/index.php?rub=5&path=debian/etch_x86
Hors ligne
#23 Le 26/09/2007, à 17:17
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
je viens d'aller faire un tour sur debian packages (je n'ai pas mon ordi) et il propose la version 2.0.3 pour testing (donc ce que j'ai normalement)
et la version 2.0.11 pour unstable (j'essaierai ça ce soir)
Sinon pour l'unstable il propose aussi la 2.0.9 mais uniquement pour 64 bit et powerpc
edit : je parles de ekiga lol
Dernière modification par ahsid (Le 26/09/2007, à 17:18)
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne
#24 Le 26/09/2007, à 17:21
- freechelmi
Re : [résolu]webcam integrée 0c45:62c0 Microdia
la 2.0.11 serait idéal elle est sortie y a quelques jours , mais si tu es en testing , vaut peut etre mieux que tu prennes la 2.09 du site
Hors ligne
#25 Le 26/09/2007, à 17:25
- ahsid
Re : [résolu]webcam integrée 0c45:62c0 Microdia
Non il n'y a pas de problème je peux mettre la version unstable c'est d'ailleurs ce que je fais pour pas mal de prog genre ktorrent etc... j'ai des dépots sid et lenny.
De toute façon j'essaierai aussi la 2.0.9 au cas où.
OpenSuse & KDE 4.4 (mais mon rêve c'est de pouvoir remettre Chakra, Sony de #&@*ù$&# ! )
Hors ligne