#1 Le 19/11/2005, à 21:07
- delirii
Sortie TV sur carte ATI (Breezy + drivers ATI 8.19)
Bon, je me lance... après avoir pas mal triffouillé ma config, l'avoir corrompue... avoir tout reinstallé :-)
Voilà mes questions :
Pourquoi ma sortie est elle N&B alors que les drivers sous feu Windows 2000 m'affichaient le signal en couleur...
Puis-je avoir un equivalent au mode Theater des drivers windows par le biais de softs tiers eventuellement (mode Theater, c'est l'envoi en full screen sur la TV de tout affichage overlay présent sur l'ecran du bureau).
Je vous poste mon xorg.conf, torturé...
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig Screen 0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSectionSection "Files"
# paths to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSectionSection "Module"
Load "GLcore"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSectionSection "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSectionSection "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSectionSection "Monitor"
Identifier "Écran générique"
HorizSync 27.0 - 90.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSectionSection "Monitor"
Identifier "aticonfig Monitor 0"
EndSectionSection "Device"
Identifier "ATI Technologies, Inc. Radeon 9600 (R300 AP)"
Driver "ati"
BusID "PCI:3:0:0"
EndSectionSection "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
BusID "PCI:3:0:0"
EndSectionSection "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon 9600 (R300 AP)"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSectionSection "Screen"
Identifier "aticonfig Screen 0"
Device "ATI Graphics Adapter 0"
Monitor "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionSection "DRI"
Mode 0666
EndSection
Merci de corriger ce qui ne va pas... ou de m'expliquer ce qui manque...
Hors ligne
#2 Le 20/11/2005, à 00:16
- Julian
Re : Sortie TV sur carte ATI (Breezy + drivers ATI 8.19)
Salut,
Ton post aurait plus sa place dans la section "Serveurs graphiques et cartes vidéo" et tu aurait surement plus de réponses, si un modo passe dans le coin svp.
Il est bizarre ton xorg.conf .
Je possede une carte ati 8500 "all in wonder", il n'y a que depuis la version 8.19 que je peux enfin profiter de ma sortie TV en dual screen.
En fait dans fglrxconfig, j'ai choisi "Two drivers" ce qui fait que maintenant au démarrage de ma session, j'ai un bureau sur ma Tv avec sa propre config + mon bureau sur mon écran pc comme d'hab.
Le gros avantage (j'suis tout fou depuis que ça marche), c'est qu'en sortant avec ma souris de mon bureau pc, ma souris apparait sur la téloche, à partir de là j'ai mon propre bureau et je lance par exemple un jeu ou un film avec une qualité top. Par exemple je lance Totem, comme j'ai une tv 4/3, je choisis donc 4/3 dans "affichage" puis "fullscreen" et ccomme ça tout est optimisé.
On ajoute une 2ème carte son et plus besoin de lecteur dvd ou divxbox
Je peux ainsi continuer à bosser sur mon bureau comme si de rien était en redéplacant la souris sur le bon écran .
J'étais juste habitué avant au mode clone, ça monopolisé les 2 écrans (pc + tv), là c'est le pied.
Bref je pense que pour ce que tu souhaites faire, ça peut t'intéresser et peut être te dépanner.
Je te balance mon xorg.conf qui tourne sans prob, à toi de prendre ce qui te convient:
Section "dri"
Mode 0666
EndSectionSection "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSectionLoad "type1"
Load "freetype"
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSectionSection "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"EndSection
Section "ServerFlags"
EndSectionSection "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "fr"
EndSectionSection "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
EndSectionSection "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 80.5
VertRefresh 20 - 60
Option "DPMS"
EndSectionSection "Monitor"
Identifier "Monitor1"
HorizSync 31.5
VertRefresh 20 - 60
Option "DPMS"
EndSectionSection "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSectionSection "Device"
Identifier "ATI Graphics Adapter connector 0"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
Option "DesktopSetup" "(null)"
Option "HSync2" "31.5 "
Option "VRefresh2" "20 - 60"
Option "ScreenOverlap" "0"# === TV-out Management ===
Option "TVFormat" "PAL-B"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"# === OpenGL Overlay ===
Option "OpenGLOverlay" "off"# === Center Mode (Laptops only) ===
Option "CenterMode" "off"# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4242
Screen 0
EndSectionSection "Device"
Identifier "ATI Graphics Adapter connector 1"
Driver "fglrx"
BusID "PCI:1:0:0" # vendor=1002, device=4242
Screen 1
EndSection# **********************************************************************
# Screen sections
# **********************************************************************Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter connector 0"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSectionSection "Screen"
Identifier "Screen1"
Device "ATI Graphics Adapter connector 1"
Monitor "Monitor1"
DefaultDepth 24Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSectionSection "ServerLayout"
Identifier "Server Layout"
Screen "Screen0"
Screen "Screen1" RightOf "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"EndSection
En espérant que ça puisse te servir.
Pour le noir&blanc, il y a aussi un délire avec pal/secam je crois, j'ai choisi pal-b.
@+
Julian.
Dernière modification par Julian (Le 20/11/2005, à 00:38)
julian@jabber.fr
Hors ligne
#3 Le 20/11/2005, à 16:07
- delirii
Re : Sortie TV sur carte ATI (Breezy + drivers ATI 8.19)
Alors là c'est enorme !!! C'est exactement ce que j'aimerais avoir. Je vais tester ta config tout à l'heure ! Encore merci pour ta reponse !!!
NOTE : si un modo veut bien deplacer ce post que je pensais bien placé mais visiblement serait mieux "Serveurs graphiques et cartes vidéo".
EDIT : J'ai modifié mon fichier xorg.conf en m'appuyant sur le tiens : ça marche nickel : j'ai bien le second ecran sur la TV et qui plus est en couleur (ce luxe ! ;-) ).
Le hic de ce procédé est que la frequence sur le moniteur est la meme que sur la TV : 60Hz et autant sur la TV cela ne gene pas pour l'usage que j'en fais (films) que sur le moniteur, ça flingue un peu les yeux (je suis habitué à avoir une resolution 1600*1200 en 75Hz, le maximum que mon moniteur peut encaisser).
Je crois qu'on ne peut pas avoir deux frequences différentes, quelqu'un peut confirmer / infirmer ?
Dernière modification par delirii (Le 20/11/2005, à 20:54)
Hors ligne
#4 Le 07/02/2006, à 23:57
- tbonacco
Re : Sortie TV sur carte ATI (Breezy + drivers ATI 8.19)
J'avais le même problème qui a été résolu instantannément dès lors que j'ai suivi l'installation de l'acceleration 3D ATI.
Hors ligne