#1 Le 31/07/2014, à 10:04
- Entilore
[RESOLU] Plantage au démarrage : grub rescue
Bonjour,
Il y a trois semaine, j'ai installé ubuntu sur l'ordinateur de mes parents, windows ne démarrant plus ( écran noir après le bios )
Tout marchait parfaitement jusqu'à aujourd'hui. J'ai à peu prêt la même erreur : un écran noir pendant une trentaine de seconde, puis je tombe sur grub rescue avec l'erreur suivante :
error: failure reading sector 0x802 from 'hd0'
Est ce que quelqu'un aurait une idée ?
Merci d'avance
Dernière modification par Entilore (Le 01/08/2014, à 10:13)
Hors ligne
#2 Le 31/07/2014, à 10:41
- flog73
Re : [RESOLU] Plantage au démarrage : grub rescue
Salut, tu peux booter sur ton live cd ou ta clé usb et télécharger puis exécuter Boot info script
1. Télécharger le zip et le copier/glisser sur le bureau
2. Le de-zippé sur le bureau.
3. Copier les fichiers contenu dans le dossier de-zippé sur le bureau
4 Ouvrir un terminal et éxecuter la commande suivante :
sudo bash ~/Desktop/boot_info_script.sh
Il va te créer un fichier texte contenant des infos sur le bureau. Copie son contenu ici.
Xubuntu 14.04 LTS 32 bits
config : EEEpc
Hors ligne
#3 Le 31/07/2014, à 10:53
- flog73
Re : [RESOLU] Plantage au démarrage : grub rescue
Hum chez moi la commande faisait des sienne, j'ai utilisé celle-ci :
sudo ~/Bureau/bootinfoscript
Xubuntu 14.04 LTS 32 bits
config : EEEpc
Hors ligne
#4 Le 31/07/2014, à 11:06
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
Je n'arrive pas à démarrer avec le disque d'amorçage.
Au bout d'une minute d'attente, j'ai juste ce message lorsque j'appuie sur une flèche ( droite ou haut )
stdin: I/O error
stdin: Not a typewriter
Hors ligne
#5 Le 31/07/2014, à 11:27
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
Rectification ! après une demi heure de moulinage il a démarré ... Je ne comprends pas.
Hors ligne
#6 Le 31/07/2014, à 12:32
- flog73
Re : [RESOLU] Plantage au démarrage : grub rescue
Essais de faire ce que je t'ai dis, test ton disque dur aussi avec Smartmontools c'est bien possible qu'il soit fatigué.
Xubuntu 14.04 LTS 32 bits
config : EEEpc
Hors ligne
#7 Le 31/07/2014, à 14:00
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
Voici le resultat de la commande bootinfoscritpt :
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system:
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20140113
Boot sector info: Syslinux looks at sector 2602784 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/efi/BOOT/grubx64.efi /bootmgr /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 968,796,159 968,794,112 83 Linux
/dev/sda2 968,798,206 976,771,071 7,972,866 5 Extended
/dev/sda5 968,798,208 976,771,071 7,972,864 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 31,264,767 31,262,720 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 a2e87395-4144-4021-8aa7-e8a90245759c ext3
/dev/sda5 17fdbb1f-569b-41ce-ad00-a767ffc6e6c6 swap
/dev/sdb1 98DA-BDFD vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda1
Unknown BootLoader on sda2
00000000 07 65 91 83 59 da 7d 60 e2 81 08 c6 9b 82 c2 1d |.e..Y.}`........|
00000010 84 38 15 0b 03 7a 34 90 3d ee e8 12 f1 a9 51 e5 |.8...z4.=.....Q.|
00000020 7e 43 ef df 43 8f ae e1 40 26 be 57 10 9a 5f 55 |~C..C...@&.W.._U|
00000030 19 58 04 c7 b4 ad e7 cf 5f 08 6d 3f 2f 75 fa 87 |.X......_.m?/u..|
00000040 70 ec 03 db 70 8a 60 49 cb 79 9c d0 43 8f 39 25 |p...p.`I.y..C.9%|
00000050 ea 0e 0f 82 fc c4 6c b0 06 20 f0 34 53 15 9c c6 |......l.. .4S...|
00000060 16 11 a1 7b 96 73 83 0b c0 5c 8e 87 75 e4 b8 21 |...{.s...\..u..!|
00000070 38 e7 1b 69 75 84 58 4e 1c dd f0 bd e2 8a 33 86 |8..iu.XN......3.|
00000080 33 a9 22 0e 7c e8 d3 9c 73 b5 0b 47 25 0d da ce |3.".|...s..G%...|
00000090 bd f2 0e 41 87 cc 61 65 f9 4c 15 ba 4f 74 77 56 |...A..ae.L..OtwV|
000000a0 cd 6e ca e0 4a 16 2a ea 1a 82 a2 b1 a8 67 bc 13 |.n..J.*......g..|
000000b0 cf c3 90 32 fc 60 a3 6c b6 eb 42 3c a8 27 62 0e |...2.`.l..B<.'b.|
000000c0 31 e3 b6 e9 38 d7 a1 6a a1 ea 3a 2d 1b f7 5c 3e |1...8..j..:-..\>|
000000d0 8b 87 57 94 8e e0 e1 7d d4 e3 93 85 c6 68 13 62 |..W....}.....h.b|
000000e0 ce 7e 1b 86 8c 3f 44 ee 24 54 20 20 c6 a0 52 a2 |.~...?D.$T ..R.|
000000f0 0d e6 35 66 ba 88 8a d1 40 9b b4 eb ff c1 06 c7 |..5f....@.......|
00000100 98 8a b8 54 9f 89 ad ed bd 47 66 59 5e a9 4c 49 |...T.....GfY^.LI|
00000110 e8 90 3f 74 27 96 1f 21 a0 d8 e3 47 15 82 02 b1 |..?t'..!...G....|
00000120 a6 1d 23 ee a7 27 ae ab 7c ac f4 4f f9 e7 55 13 |..#..'..|..O..U.|
00000130 3e fb 29 8c b1 aa 2d 06 0a 2c 77 a3 1b e3 e0 c0 |>.)...-..,w.....|
00000140 e2 5a ac 38 88 e2 08 af 20 6e 9a f8 c9 f6 ed 6d |.Z.8.... n.....m|
00000150 ba 1a 77 0d 1e 5d 86 a2 26 8e 13 ad 0c bd 6c 1d |..w..]..&.....l.|
00000160 9e 76 c6 e6 d9 f9 78 f5 0e 55 7a e3 17 79 05 e1 |.v....x..Uz..y..|
00000170 dc ef 61 a0 92 f8 36 cb b0 23 8c 50 0d ce 2c 16 |..a...6..#.P..,.|
00000180 a1 fc da 52 da d3 5d 7c 8f 81 40 1f 5e d7 4a 65 |...R..]|..@.^.Je|
00000190 07 97 72 14 95 fd ec b9 23 11 7c d7 c7 ec de 60 |..r.....#.|....`|
000001a0 e5 c7 95 96 22 39 c8 cf 43 86 5f 58 e6 31 af dd |...."9..C._X.1..|
000001b0 ff 7f 00 8a 7c 42 1f f2 49 5c 73 9f 57 ff 00 fe |....|B..I\s.W...|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 a8 79 00 00 00 |............y...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
hexdump: /dev/sda1: Input/output error
hexdump: /dev/sda1: Input/output error
bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
cat: /tmp/BootInfo-fed6TasV/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-fed6TasV/Tmp_Log: No such file or directory
/dev/sda1: read failed after 0 of 4096 at 0: Input/output error
/dev/sda1: read failed after 0 of 4096 at 4096: Input/output error
No volume groups found
et pour le dd :
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system:
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20140113
Boot sector info: Syslinux looks at sector 2602784 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/efi/BOOT/grubx64.efi /bootmgr /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 968,796,159 968,794,112 83 Linux
/dev/sda2 968,798,206 976,771,071 7,972,866 5 Extended
/dev/sda5 968,798,208 976,771,071 7,972,864 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 31,264,767 31,262,720 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 a2e87395-4144-4021-8aa7-e8a90245759c ext3
/dev/sda5 17fdbb1f-569b-41ce-ad00-a767ffc6e6c6 swap
/dev/sdb1 98DA-BDFD vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda1
Unknown BootLoader on sda2
00000000 07 65 91 83 59 da 7d 60 e2 81 08 c6 9b 82 c2 1d |.e..Y.}`........|
00000010 84 38 15 0b 03 7a 34 90 3d ee e8 12 f1 a9 51 e5 |.8...z4.=.....Q.|
00000020 7e 43 ef df 43 8f ae e1 40 26 be 57 10 9a 5f 55 |~C..C...@&.W.._U|
00000030 19 58 04 c7 b4 ad e7 cf 5f 08 6d 3f 2f 75 fa 87 |.X......_.m?/u..|
00000040 70 ec 03 db 70 8a 60 49 cb 79 9c d0 43 8f 39 25 |p...p.`I.y..C.9%|
00000050 ea 0e 0f 82 fc c4 6c b0 06 20 f0 34 53 15 9c c6 |......l.. .4S...|
00000060 16 11 a1 7b 96 73 83 0b c0 5c 8e 87 75 e4 b8 21 |...{.s...\..u..!|
00000070 38 e7 1b 69 75 84 58 4e 1c dd f0 bd e2 8a 33 86 |8..iu.XN......3.|
00000080 33 a9 22 0e 7c e8 d3 9c 73 b5 0b 47 25 0d da ce |3.".|...s..G%...|
00000090 bd f2 0e 41 87 cc 61 65 f9 4c 15 ba 4f 74 77 56 |...A..ae.L..OtwV|
000000a0 cd 6e ca e0 4a 16 2a ea 1a 82 a2 b1 a8 67 bc 13 |.n..J.*......g..|
000000b0 cf c3 90 32 fc 60 a3 6c b6 eb 42 3c a8 27 62 0e |...2.`.l..B<.'b.|
000000c0 31 e3 b6 e9 38 d7 a1 6a a1 ea 3a 2d 1b f7 5c 3e |1...8..j..:-..\>|
000000d0 8b 87 57 94 8e e0 e1 7d d4 e3 93 85 c6 68 13 62 |..W....}.....h.b|
000000e0 ce 7e 1b 86 8c 3f 44 ee 24 54 20 20 c6 a0 52 a2 |.~...?D.$T ..R.|
000000f0 0d e6 35 66 ba 88 8a d1 40 9b b4 eb ff c1 06 c7 |..5f....@.......|
00000100 98 8a b8 54 9f 89 ad ed bd 47 66 59 5e a9 4c 49 |...T.....GfY^.LI|
00000110 e8 90 3f 74 27 96 1f 21 a0 d8 e3 47 15 82 02 b1 |..?t'..!...G....|
00000120 a6 1d 23 ee a7 27 ae ab 7c ac f4 4f f9 e7 55 13 |..#..'..|..O..U.|
00000130 3e fb 29 8c b1 aa 2d 06 0a 2c 77 a3 1b e3 e0 c0 |>.)...-..,w.....|
00000140 e2 5a ac 38 88 e2 08 af 20 6e 9a f8 c9 f6 ed 6d |.Z.8.... n.....m|
00000150 ba 1a 77 0d 1e 5d 86 a2 26 8e 13 ad 0c bd 6c 1d |..w..]..&.....l.|
00000160 9e 76 c6 e6 d9 f9 78 f5 0e 55 7a e3 17 79 05 e1 |.v....x..Uz..y..|
00000170 dc ef 61 a0 92 f8 36 cb b0 23 8c 50 0d ce 2c 16 |..a...6..#.P..,.|
00000180 a1 fc da 52 da d3 5d 7c 8f 81 40 1f 5e d7 4a 65 |...R..]|..@.^.Je|
00000190 07 97 72 14 95 fd ec b9 23 11 7c d7 c7 ec de 60 |..r.....#.|....`|
000001a0 e5 c7 95 96 22 39 c8 cf 43 86 5f 58 e6 31 af dd |...."9..C._X.1..|
000001b0 ff 7f 00 8a 7c 42 1f f2 49 5c 73 9f 57 ff 00 fe |....|B..I\s.W...|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 a8 79 00 00 00 |............y...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
hexdump: /dev/sda1: Input/output error
hexdump: /dev/sda1: Input/output error
bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
cat: /tmp/BootInfo-fed6TasV/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-fed6TasV/Tmp_Log: No such file or directory
/dev/sda1: read failed after 0 of 4096 at 0: Input/output error
/dev/sda1: read failed after 0 of 4096 at 4096: Input/output error
No volume groups found
Merci !
Hors ligne
#8 Le 31/07/2014, à 14:08
- flog73
Re : [RESOLU] Plantage au démarrage : grub rescue
Je comprend pas tout... Tu pourrais faire un test SMART du disque dur ?
Xubuntu 14.04 LTS 32 bits
config : EEEpc
Hors ligne
#9 Le 31/07/2014, à 14:26
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
ça ?
Si oui, j'ai lancé le test ...
sudo smartctl -t short /dev/sda
sudo smartctl -t long /dev/sda
Hors ligne
#10 Le 31/07/2014, à 14:31
- flog73
Re : [RESOLU] Plantage au démarrage : grub rescue
Oui
sudo smartctl -t short /dev/sdX
Mais pour toi ce sera
sudo smartctl -t short /dev/sda1
et
sudo smartctl -t short /dev/sdb1
Xubuntu 14.04 LTS 32 bits
config : EEEpc
Hors ligne
#11 Le 31/07/2014, à 14:50
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
Okay, j'ai lancé tout ça. à priori je me suis planté dans le copier coller pour le Smartmontools, je voulais mettre ça :
Please note the following marginal Attributes:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0022 058 045 045 Old_age Always In_the_past 42 (Min/Max 42/50)
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..56GSY
Device Model: TOSHIBA MK5056GSY
Serial Number: 6061FGDZS
LU WWN Device Id: 5 000039 296781f08
Firmware Version: LH003C
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Jul 31 14:49:29 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 108) minutes.
SCT capabilities: (0x0033) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0007 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 100 100 002 Pre-fail Always - 1777
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 9399
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 8
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Minutes 0x0032 082 082 000 Old_age Always - 126h+14m
10 Spin_Retry_Count 0x0013 253 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6593
183 Runtime_Bad_Block 0x0022 100 100 001 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
185 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 65535
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 772
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 057 045 045 Old_age Always In_the_past 43 (Min/Max 42/50)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1022
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5636182
193 Load_Cycle_Count 0x0032 089 089 000 Old_age Always - 111669
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 8
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 3
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1492 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1492 occurred at disk power-on lifetime: 7572 hours (315 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 00 08 00 40 00 01:10:43.497 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:10:43.497 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 01:10:43.496 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:10:43.496 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 01:10:43.496 SET FEATURES [Enable SATA feature]
Error 1491 occurred at disk power-on lifetime: 7572 hours (315 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 00 08 00 40 00 01:10:40.447 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:10:40.447 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 01:10:40.446 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:10:40.446 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 01:10:40.446 SET FEATURES [Enable SATA feature]
Error 1490 occurred at disk power-on lifetime: 7572 hours (315 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 00 08 00 40 00 01:10:37.397 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:10:37.397 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 01:10:37.396 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:10:37.396 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 01:10:37.396 SET FEATURES [Enable SATA feature]
Error 1489 occurred at disk power-on lifetime: 7572 hours (315 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 00 08 00 40 00 01:10:34.347 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:10:34.347 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 01:10:34.346 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:10:34.346 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 01:10:34.345 SET FEATURES [Enable SATA feature]
Error 1488 occurred at disk power-on lifetime: 7572 hours (315 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 00 08 00 40 00 01:10:31.297 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:10:31.296 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 01:10:31.296 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:10:31.295 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 01:10:31.295 SET FEATURES [Enable SATA feature]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 7574 2048
# 2 Extended offline Completed: read failure 90% 7573 2048
# 3 Short offline Completed: read failure 90% 7573 2048
# 4 Short offline Completed without error 00% 4 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Hors ligne
#12 Le 31/07/2014, à 14:59
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
Pour le sda1
ubuntu@ubuntu:~$ sudo smartctl -l selftest /dev/sda1
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 7574 2048
# 2 Short offline Completed: read failure 90% 7574 2048
# 3 Extended offline Completed: read failure 90% 7573 2048
# 4 Short offline Completed: read failure 90% 7573 2048
# 5 Short offline Completed without error 00% 4 -
Pour le sdb2 ( ça ne serait pas ma clef live ? )
ubuntu@ubuntu:~$ sudo smartctl -l selftest /dev/sdb1
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
Device does not support Self Test logging
Hors ligne
#13 Le 31/07/2014, à 15:19
- flog73
Re : [RESOLU] Plantage au démarrage : grub rescue
Oui autant pour moi le sdb1 c'est ta clé live... C'est la vacances je suis fatigué...
Pour le sda1 tu peux faire
sudo smartctl -t long /dev/sda1
Les messages indiquent des problèmes de lectures de certaines parties du disque dur, il est peut être fatigué
Xubuntu 14.04 LTS 32 bits
config : EEEpc
Hors ligne
#14 Le 31/07/2014, à 15:21
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
Test will complete after Thu Jul 31 17:09:07 2014
...
à dans deux heures ^^
Hors ligne
#15 Le 31/07/2014, à 15:25
- flog73
Re : [RESOLU] Plantage au démarrage : grub rescue
Courage ^^
Xubuntu 14.04 LTS 32 bits
config : EEEpc
Hors ligne
#16 Le 31/07/2014, à 15:26
- flog73
Re : [RESOLU] Plantage au démarrage : grub rescue
Mais comme exemple mon dd qui est neuf (hier)
flo@flo-HP:~$ sudo smartctl -t short /dev/sda4
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Thu Jul 31 15:20:22 2014
Use smartctl -X to abort test.
flo@flo-HP:~$ sudo smartctl -l selftest /dev/sda4
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 18 -
# 2 Short offline Completed without error 00% 17 -
Xubuntu 14.04 LTS 32 bits
config : EEEpc
Hors ligne
#17 Le 31/07/2014, à 15:41
- flog73
Re : [RESOLU] Plantage au démarrage : grub rescue
Je me disais que j'utilisais un autre soft dans le temps c'est celui ci.
dans un terminal
gnome-disks
Tu vas avoir une fenêtre comme cella là :
À gauche tu vas pourvoir choisir le disque dur que tu veux
En haut à droit tu clique sur plus d'options et cliquer sur "Données SMART et auto-test" tu vas avoir cette fenêtre :
Tu fais un Auto test "court" et tu regarde dans la colonne "Estimation" si certaines sont mauvaises.
Ce sera plus lisible que dans un terminal
Xubuntu 14.04 LTS 32 bits
config : EEEpc
Hors ligne
#18 Le 31/07/2014, à 17:36
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
quelle est la commande a executer pour afficher le resultat du test long ? J'ai cru comprendre que c'était la meme que pour l'autre, mais ça me donne la meme chose :
ubuntu@ubuntu:~$ sudo smartctl -l selftest /dev/sda1
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 7576 2048
# 2 Extended offline Completed: read failure 90% 7574 2048
# 3 Short offline Completed: read failure 90% 7574 2048
# 4 Short offline Completed: read failure 90% 7574 2048
# 5 Extended offline Completed: read failure 90% 7573 2048
# 6 Short offline Completed: read failure 90% 7573 2048
# 7 Short offline Completed without error 00% 4 -
Hors ligne
#19 Le 31/07/2014, à 18:10
- moko138
Re : [RESOLU] Plantage au démarrage : grub rescue
Peu importent les autres résultats, le retour de
sudo smartctl -a /dev/sda
au message #11, montre clairement que le disque de tes parents est au bout du rouleau. Il faut au plus vite :
- arrêter les tests (ils n'apporteront aucun dépannage et accéléreront son usure),
- sauvegarder ce qui peut l'être pendant que le disque est encore à peu près lisible. Ce sera plus facile en démarrant d'un autre disque ou clef usb.
Ensuite, tu auras la sérénité pour remplacer le disque.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#20 Le 31/07/2014, à 18:23
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
Les sauvegardes, c'est la première chose que j'ai fait quand j'ai installé ubuntu dessus, il y a à peine deux semaines.
Il y a quand même quelque chose qui m'intrigue : avant hier il fonctionnait parfaitement bien. Il a pu crashé en un jour ? ( à priori mon père a forcé l'arret hier, suite à un bug )
Hors ligne
#21 Le 31/07/2014, à 22:13
- moko138
Re : [RESOLU] Plantage au démarrage : grub rescue
Les sauvegardes, c'est la première chose que j'ai fait quand j'ai installé ubuntu dessus, il y a à peine deux semaines.
Bien vu !
Il y a quand même quelque chose qui m'intrigue : avant hier il fonctionnait parfaitement bien. Il a pu crashé en un jour ? ( à priori mon père a forcé l'arret hier, suite à un bug )
Nuance : avant hier il donnait l'impression de fonctionner parfaitement bien.
Ce, grâce à ses redondances et autres capacités d'auto-correction.
Tu peux ainsi remarquer, ligne 5 : 8 secteurs réalloués, signe d'usure et de compensation,
ligne 197 : encore 3 secteurs en attente de ré-allocation.
ligne 12 : 6.600 mises sous tension. A raison de deux par jour, 300 jours par an, ça ferait 11 ans d'âge : respectable. Apparemment ce Toshiba MK5056GSY, c'était de la qualité !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#22 Le 31/07/2014, à 23:11
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
C'est très étonnant ... L'ordinateur a 5 ans, on l'a acheté neuf. Et on doit être loin des 2 allumage par jour, 300 jours par an.
En tout cas résolu. Mes parents vont essayer de le pousser jusqu'aux prochains solde ... On va bien voir.
En tout cas, merci beaucoup pour votre aide !
c'est normal que je sois sur le forum kubuntu alors que j'ai posté sur ubuntu ? ça c'est p'têt plus un message pour les webmasters ^^
Hors ligne
#23 Le 01/08/2014, à 00:02
- moko138
Re : [RESOLU] Plantage au démarrage : grub rescue
"résolu"... jusqu'à la prochaine erreur de lecture sur un secteur corrompu.
Tu es aussi sur xubuntu,
edubuntu
et bien sûr ubuntu,
simple habillage. Tu as une veste réversible à quatre faces !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#24 Le 01/08/2014, à 10:14
- Entilore
Re : [RESOLU] Plantage au démarrage : grub rescue
J'ai bien compris, mais je trouve assez etonnant que l'email me redirige vers cette page alors que j'ai posté sous l'habillage ubuntu ^^
Bon, en tout cas Merci beaucoup !
Hors ligne