Pages : 1
#1 Le 04/02/2018, à 14:04
- BenjaminP_87
Scanner Samsung SCX 4623
Bonjour,
j'ai installé l'imprimante-scanner Samsung SCX 4623 sur mon desktop Ubuntu 16.04 32 bits à partir du driver uld_v1.00.36_00.91 ==> Aucun soucis.
J'ai fait la même chose pour mon PC fixe sur Ubuntu 16.04 64 bits ==> je peux imprimer mais pas scanner.
Quelqu'un a une idée du problème ?
Hors ligne
#2 Le 04/02/2018, à 15:15
- sylvain3800
Re : Scanner Samsung SCX 4623
Pas d'idée mais il va falloir comparer l'installation sur les 2 systèmes et voir ou le bas blesse :
pour cela donne nous le retours entre balise code des commandes suivante passé depuis un terminal dans un premier temps depuis ton portable dans ta première réponse puis depuis ton ordi fixe dans un second message, histoire de comparer les différences en profondeurs
cat /etc/*release && uname -a
groups
dpkg -l | grep suld
dpkg -l | grep libsane
sane-find-scanner
scanimage -L
ls /etc/sane.d/
cat /etc/sane.d/dll.conf
ls /lib/udev/rules.d | grep libsane
Peut être verrons nous quelque chose de "choquant" et si non on pourras déjà restreindre le champs de recherche.
@ ++
Dernière modification par sylvain3800 (Le 04/02/2018, à 15:22)
Cogito ergo sum = je consome donc je suis : je pense, donc je suis !
Hors ligne
#3 Le 04/02/2018, à 15:31
- L'Africain
Re : Scanner Samsung SCX 4623
As-tu lu cette page? IL est préférable d'utiliser le dépot dédié plutôt que le pilote unifié.
Ubuntu-Unity 18.04 LDLC (clevo) X/Lubuntu-Mate
"Donne à celui qui te demande…" Mt 5,42
Hors ligne
#4 Le 10/02/2018, à 13:38
- BenjaminP_87
Re : Scanner Samsung SCX 4623
voilà le retour des commandes sur mon laptop
benjamin@benjamin-Notebook:~$ cat /etc/*release && uname -a
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.3 LTS"
NAME="Ubuntu"
VERSION="16.04.3 LTS (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04.3 LTS"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
VERSION_CODENAME=xenial
UBUNTU_CODENAME=xenial
Linux benjamin-Notebook 4.10.0-28-generic #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:13 UTC 2017 i686 i686 i686 GNU/Linux
benjamin@benjamin-Notebook:~$
benjamin@benjamin-Notebook:~$ groups
benjamin adm cdrom sudo dip plugdev lpadmin sambashare
benjamin@benjamin-Notebook:~$
benjamin@benjamin-Notebook:~$ dpkg -l | grep suld
benjamin@benjamin-Notebook:~$
benjamin@benjamin-Notebook:~$ dpkg -l | grep libsane
ii libsane:i386 1.0.25+git20150528-1ubuntu2.16.04.1 i386 API library for scanners
ii libsane-common 1.0.25+git20150528-1ubuntu2.16.04.1 all API library for scanners -- documentation and support files
ii libsane-hpaio:i386 3.16.3+repack0-1 i386 HP SANE backend for multi-function peripherals
benjamin@benjamin-Notebook:~$
benjamin@benjamin-Notebook:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04e8 [Samsung], product=0x3434 [SCX-4623 Series]) at libusb:002:003
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 007:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 006:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
benjamin@benjamin-Notebook:~$
benjamin@benjamin-Notebook:~$ scanimage -L
device `xerox_mfp:libusb:002:003' is a Samsung Samsung SCX-4623 Series multi-function peripheral
benjamin@benjamin-Notebook:~$
benjamin@benjamin-Notebook:~$ ls /etc/sane.d/
abaton.conf dll.d lexmark.conf saned.conf
agfafocus.conf dmc.conf ma1509.conf sceptre.conf
apple.conf epjitsu.conf magicolor.conf sharp.conf
artec.conf epson2.conf matsushita.conf sm3840.conf
artec_eplus48u.conf epson.conf microtek2.conf snapscan.conf
avision.conf epsonds.conf microtek.conf sp15c.conf
bh.conf fujitsu.conf mustek.conf st400.conf
canon630u.conf genesys.conf mustek_pp.conf stv680.conf
canon.conf gphoto2.conf mustek_usb.conf tamarack.conf
canon_dr.conf gt68xx.conf nec.conf teco1.conf
canon_pp.conf hp3900.conf net.conf teco2.conf
cardscan.conf hp4200.conf p5.conf teco3.conf
coolscan2.conf hp5400.conf pie.conf test.conf
coolscan3.conf hp.conf pixma.conf u12.conf
coolscan.conf hpsj5s.conf plustek.conf umax1220u.conf
dc210.conf hs2p.conf plustek_pp.conf umax.conf
dc240.conf ibm.conf qcam.conf umax_pp.conf
dc25.conf kodakaio.conf ricoh.conf xerox_mfp.conf
dell1600n_net.conf kodak.conf rts8891.conf
dll.conf leo.conf s9036.conf
benjamin@benjamin-Notebook:~$
benjamin@benjamin-Notebook:~$ cat /etc/sane.d/dll.conf
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under
# /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory, named after the package.
#
# The next line enables the network backend; comment it out if you don't need
# to use a remote SANE scanner over the network - see sane-net(5) and saned(8)
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
benjamin@benjamin-Notebook:~$
benjamin@benjamin-Notebook:~$ ls /lib/udev/rules.d | grep libsane
60-libsane.rules
Hors ligne
#5 Le 10/02/2018, à 13:42
- BenjaminP_87
Re : Scanner Samsung SCX 4623
et celui de mon PC fixe
benjamin@benjamin-MS-7850:~$ cat /etc/*release && uname -a
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.3 LTS"
NAME="Ubuntu"
VERSION="16.04.3 LTS (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04.3 LTS"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
VERSION_CODENAME=xenial
UBUNTU_CODENAME=xenial
Linux benjamin-MS-7850 4.13.0-32-generic #35~16.04.1-Ubuntu SMP Thu Jan 25 10:13:43 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
benjamin@benjamin-MS-7850:~$
benjamin@benjamin-MS-7850:~$ groups
benjamin adm cdrom sudo dip plugdev lpadmin sambashare lxd
benjamin@benjamin-MS-7850:~$
benjamin@benjamin-MS-7850:~$ dpkg -l | grep suld
benjamin@benjamin-MS-7850:~$
benjamin@benjamin-MS-7850:~$ dpkg -l | grep libsane
ii libsane:amd64 1.0.25+git20150528-1ubuntu2.16.04.1 amd64 API library for scanners
ii libsane:i386 1.0.25+git20150528-1ubuntu2.16.04.1 i386 API library for scanners
ii libsane-common 1.0.25+git20150528-1ubuntu2.16.04.1 all API library for scanners -- documentation and support files
ii libsane-hpaio:amd64 3.16.3+repack0-1 amd64 HP SANE backend for multi-function peripherals
benjamin@benjamin-MS-7850:~$
benjamin@benjamin-MS-7850:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x8087/0x8001 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x8087/0x8009 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x174c/0x5136 at 004:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x0461/0x4d22 at 003:004: Access denied (insufficient permissions)
could not open USB device 0x05e3/0x0723 at 003:003: Access denied (insufficient permissions)
found USB scanner (vendor=0x04e8 [Samsung], product=0x3434 [SCX-4623 Series]) at libusb:003:009
could not open USB device 0x0582/0x012f at 003:002: Access denied (insufficient permissions)
could not open USB device 0x045e/0x0750 at 003:005: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
benjamin@benjamin-MS-7850:~$
benjamin@benjamin-MS-7850:~$ scanimage -L
device `smfp:usb;04e8;3434;Z2TYBAASA00332K' is a Samsung SCX-4623 Series on USB Scanner
device `xerox_mfp:libusb:003:009' is a Samsung Samsung SCX-4623 Series multi-function peripheral
device `hpaio:/net/Photosmart_C4380_series?ip=192.168.0.28' is a Hewlett-Packard Photosmart_C4380_series all-in-one
benjamin@benjamin-MS-7850:~$
benjamin@benjamin-MS-7850:~$ ls /etc/sane.d/
abaton.conf dll.d lexmark.conf saned.conf
agfafocus.conf dmc.conf ma1509.conf sceptre.conf
apple.conf epjitsu.conf magicolor.conf sharp.conf
artec.conf epson2.conf matsushita.conf sm3840.conf
artec_eplus48u.conf epson.conf microtek2.conf smfp-samsung.conf
avision.conf epsonds.conf microtek.conf snapscan.conf
bh.conf fujitsu.conf mustek.conf sp15c.conf
canon630u.conf genesys.conf mustek_pp.conf st400.conf
canon.conf gphoto2.conf mustek_usb.conf stv680.conf
canon_dr.conf gt68xx.conf nec.conf tamarack.conf
canon_pp.conf hp3900.conf net.conf teco1.conf
cardscan.conf hp4200.conf p5.conf teco2.conf
coolscan2.conf hp5400.conf pie.conf teco3.conf
coolscan3.conf hp.conf pixma.conf test.conf
coolscan.conf hpsj5s.conf plustek.conf u12.conf
dc210.conf hs2p.conf plustek_pp.conf umax1220u.conf
dc240.conf ibm.conf qcam.conf umax.conf
dc25.conf kodakaio.conf ricoh.conf umax_pp.conf
dell1600n_net.conf kodak.conf rts8891.conf xerox_mfp.conf
dll.conf leo.conf s9036.conf
benjamin@benjamin-MS-7850:~$
benjamin@benjamin-MS-7850:~$ cat /etc/sane.d/dll.conf
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under
# /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory, named after the package.
#
# The next line enables the network backend; comment it out if you don't need
# to use a remote SANE scanner over the network - see sane-net(5) and saned(8)
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp
smfp
benjamin@benjamin-MS-7850:~$
benjamin@benjamin-MS-7850:~$ ls /lib/udev/rules.d | grep libsane
60-libsane.rules
Hors ligne
#6 Le 10/02/2018, à 13:59
- L'Africain
Re : Scanner Samsung SCX 4623
C'est uniquement un problème de droit, si tu utilises le dépôt comme indiqué sur le lien de mon post #3 cela réglera le problème, car à l'installation du pilote il te demande d'ajouter ton utilisateur au bon groupe.
Ubuntu-Unity 18.04 LDLC (clevo) X/Lubuntu-Mate
"Donne à celui qui te demande…" Mt 5,42
Hors ligne
#7 Le 12/02/2018, à 11:39
- BenjaminP_87
Re : Scanner Samsung SCX 4623
Lorsque je veux ajouter la clé d'authentification j'ai le message d'erreur suivant
benjamin@benjamin-MS-7850:~$ sudo wget -O - http://www.bchemnet.com/suldr/suldr.gpg | sudo apt-key add -
--2018-02-12 10:32:47-- http://www.bchemnet.com/suldr/suldr.gpg
Résolution de www.bchemnet.com (www.bchemnet.com)… 173.236.28.2
Connexion à www.bchemnet.com (www.bchemnet.com)|173.236.28.2|:80… connecté.
requête HTTP transmise, en attente de la réponse… 404 Not Found
2018-02-12 10:32:47 erreur 404 : Not Found.
gpg: aucune donnée OpenPGP valable n'a été trouvée.
du coup je ne peux pas installer le paquet suldr-keyring
Hors ligne
#8 Le 12/02/2018, à 17:55
- L'Africain
Re : Scanner Samsung SCX 4623
Tu peux télécharger manuellement le paquet suldr-keyring puis l'installer ça devrais fonctionner (si tu es en 16.04). Je crois même qu'il est dans la logithèque.
Dernière modification par L'Africain (Le 12/02/2018, à 20:39)
Ubuntu-Unity 18.04 LDLC (clevo) X/Lubuntu-Mate
"Donne à celui qui te demande…" Mt 5,42
Hors ligne
#9 Le 13/02/2018, à 12:33
- BenjaminP_87
Re : Scanner Samsung SCX 4623
J'ai installé le paquet suldr-keyring via la logithèque mais ça ne fonctionne toujours pas.
Hors ligne
#10 Le 13/02/2018, à 12:41
- Compte supprimé
Re : Scanner Samsung SCX 4623
Bonjour,
Est-ce que ton compte utilisateur est au groupe scanner ?
Veux-tu donner le retour de la commande suivante ?
groups ton-nom-utilisateur
Dernière modification par Compte supprimé (Le 13/02/2018, à 12:41)
#11 Le 13/02/2018, à 14:04
- L'Africain
Re : Scanner Samsung SCX 4623
J'ai installé le paquet suldr-keyring via la logithèque mais ça ne fonctionne toujours pas.
Oui mais as-tu aussi installé le pilote? Le paquet suldr-keyring n'est pas le pilote. Je te conseille aussi de supprimé le pilote unifié au préalable.
Ubuntu-Unity 18.04 LDLC (clevo) X/Lubuntu-Mate
"Donne à celui qui te demande…" Mt 5,42
Hors ligne
#12 Le 13/02/2018, à 14:09
- L'Africain
Re : Scanner Samsung SCX 4623
D'ailleurs d'après la liste des liste_imprimantes_samsung le scanner devrait être reconnu automatiquement. Il faut donc installer le pilote recommandé sur la liste en question.
Dernière modification par L'Africain (Le 14/02/2018, à 18:37)
Ubuntu-Unity 18.04 LDLC (clevo) X/Lubuntu-Mate
"Donne à celui qui te demande…" Mt 5,42
Hors ligne
#13 Le 14/02/2018, à 01:03
- BenjaminP_87
Re : Scanner Samsung SCX 4623
@ L'Africain : oui le pilote est installé, le scanner est reconnu par Simple Scan mais il est impossible de lancer une numérisation.
@ Tamrou :
benjamin@benjamin-MS-7850:~$ groups benjamin
benjamin : benjamin adm cdrom sudo dip plugdev lpadmin sambashare lxd
Hors ligne
#14 Le 14/02/2018, à 08:55
- Compte supprimé
Re : Scanner Samsung SCX 4623
Alors tu pourrais passer cette commande pour t'ajouter au groupe scanner :
sudo gpasswd -a benjamin scanner
#15 Le 14/02/2018, à 18:38
- L'Africain
Re : Scanner Samsung SCX 4623
Je crois qu'il y a le groupe sane également non?
Ubuntu-Unity 18.04 LDLC (clevo) X/Lubuntu-Mate
"Donne à celui qui te demande…" Mt 5,42
Hors ligne
#16 Le 19/02/2018, à 17:59
- BenjaminP_87
Re : Scanner Samsung SCX 4623
j'ai rentré la commande
sudo gpasswd -a benjamin scanner
ce qui permet d'avoir le retour suivant
benjamin@benjamin-MS-7850:~$ groups benjamin
benjamin : benjamin adm cdrom sudo dip plugdev lpadmin scanner sambashare lxd
mais la numérisation est toujours impossible.
@ L'Africian : je ne sais pas comment rajouter groupe sane .
Hors ligne
#17 Le 19/02/2018, à 18:05
- L'Africain
Re : Scanner Samsung SCX 4623
je ne sais pas comment rajouter groupe sane
Comme pour l'autre ou comme ça :
sudo adduser $USER sane
N'oublie pas de redémarrer l'ordi.
Ubuntu-Unity 18.04 LDLC (clevo) X/Lubuntu-Mate
"Donne à celui qui te demande…" Mt 5,42
Hors ligne
#18 Le 06/03/2018, à 19:50
- BenjaminP_87
Re : Scanner Samsung SCX 4623
ça ne marche toujours pas avec SimpleScan, est-ce qu'il y a d'autre logiciels ?
Hors ligne
#19 Le 06/03/2018, à 20:54
- L'Africain
Re : Scanner Samsung SCX 4623
Salut,
As-tu correctement désinstallé le pilote unifié et réinstallé le pilote des dépôts? Sinon dans le dépôt dédié il y a aussi ce paquet: suld-scanner-usblp-fix.
Ubuntu-Unity 18.04 LDLC (clevo) X/Lubuntu-Mate
"Donne à celui qui te demande…" Mt 5,42
Hors ligne
Pages : 1