#101 Le 30/04/2018, à 17:11
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Et finalement Naziel et xubu1957 ainsi que guy1950 au bout d'un redémarrage (après une absence d'une heure 30 environ) je me retrouve avec ce "the system is running low graphics card"...
Donc en branchant l'Ethernet ça marche (...) et je peux vous écrire
Dois je quand même tenter de réinstaller Network-manager...???
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#102 Le 30/04/2018, à 17:19
- xubu1957
Re : "the system is running low card graphics" ? [non résolu]
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#103 Le 30/04/2018, à 17:30
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Merci. Oui xubu1957 exactement - quand je suis connecté via Ethernet...
Si j'enlève le cable la connexion disparait, les flèches inversées disparaissent, et laisse place à un applet de connexion vide (un cône inversé vide)...
Est-ce que cela n'aurait pas de rapport avec ceci : https://forum.ubuntu-fr.org/viewtopic.php?id=2004485 au #8
ifconfig
enp3s0 Link encap:Ethernet HWaddr d8:cb:8a:82:e9:d9
inet adr:192.168.0.10 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::6c81:f6ac:ce91:4e87/64 Scope:Lien
adr inet6: 2a01:e35:2f4b:5490:90d2:ebcf:108:4adc/64 Scope:Global
adr inet6: 2a01:e35:2f4b:5490:b44a:4cff:32c9:9629/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:41593 erreurs:0 :0 overruns:0 frame:0
TX packets:36622 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:36536178 (36.5 MB) Octets transmis:5399848 (5.3 MB)
Interruption:19
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
Packets reçus:5370 erreurs:0 :0 overruns:0 frame:0
TX packets:5370 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:588928 (588.9 KB) Octets transmis:588928 (588.9 KB)
wlp4s0 Link encap:Ethernet HWaddr 28:c2:dd:e9:c2:7b
UP BROADCAST MULTICAST MTU:1500 Metric:1
Dernière modification par arzavapi (Le 30/04/2018, à 18:07)
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#104 Le 30/04/2018, à 18:59
- xubu1957
Re : "the system is running low card graphics" ? [non résolu]
Cette icone > Aucun réseau connecté > network-manager#utilisation ?
Que donne :
sudo modprobe rtl8723be
?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#105 Le 30/04/2018, à 19:13
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Merci xubu1957
L'écriture ne donne rien :
~$ sudo modprobe rtl8723be
[sudo] Mot de passe de pierre :
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$
Quand je veux savoir si le wifi fonctionne je clique sur ces 2 flèches inversées (je vois que "Activer le réseau Wifi" est coché.
En cliquant sur "Modifications des connexions" je tombe sur un petit tableau "connexions réseau" où je vois que l'Ethernet est en connexion filaire 1 et que le wifi est connecté à la box (free) que j'ai. En cliquant 2 fois sur la connexion de la box (freeboxSUQSHL) je vois un petit tableau où sur le 2ème onglet "Sécurité" indique "WPA et WPA2 personnel"...
Pourquoi existe-t-il ces deux WPA ? -je précise que "tous les utilisateurs peuvent se connecter à ce réseau" est coché dans les 2 cas...
D'autre part je me suis permis de renseigner tout sur le wifi :
~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.4 LTS"
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 13d3:3394 IMC Networks Bluetooth
Bus 003 Device 002: ID 5986:014c Acer, Inc
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
03:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ lspci -k -nn | grep -A 3 -i net
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
Subsystem: Micro-Star International Co., Ltd. [MSI] AR8161 Gigabit Ethernet [1462:10e9]
Kernel driver in use: alx
Kernel modules: alx
04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter [10ec:8723]
Subsystem: AzureWave RTL8723AE PCIe Wireless Network Adapter [1a3b:2114]
Kernel driver in use: rtl8723ae
Kernel modules: rtl8723ae
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
Subsystem: Micro-Star International Co., Ltd. [MSI] Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller
Kernel modules: ie31200_edac
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
DeviceName: Onboard IGD
Subsystem: Micro-Star International Co., Ltd. [MSI] 4th Gen Core Processor Integrated Graphics Controller
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
Subsystem: Micro-Star International Co., Ltd. [MSI] Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB xHCI
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family MEI Controller
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB EHCI
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB EHCI
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] HM86 Express LPC Controller
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family SMBus Controller
Kernel modules: i2c_i801
03:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)
Subsystem: Micro-Star International Co., Ltd. [MSI] AR8161 Gigabit Ethernet
Kernel driver in use: alx
Kernel modules: alx
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter
Subsystem: AzureWave RTL8723AE PCIe Wireless Network Adapter
Kernel driver in use: rtl8723ae
Kernel modules: rtl8723ae
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ sudo lshw -C network
[sudo] Mot de passe de pierre :
*-network
description: Ethernet interface
produit: AR8161 Gigabit Ethernet
fabriquant: Qualcomm Atheros
identifiant matériel: 0
information bus: pci@0000:03:00.0
nom logique: enp3s0
version: 10
numéro de série: d8:cb:8a:82:e9:d9
taille: 100Mbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=alx duplex=full ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
ressources: irq:19 mémoire:f7d00000-f7d3ffff portE/S:e000(taille=128)
*-network
description: Interface réseau sans fil
produit: RTL8723AE PCIe Wireless Network Adapter
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:04:00.0
nom logique: wlp4s0
version: 00
numéro de série: 28:c2:dd:e9:c2:7b
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rtl8723ae driverversion=4.13.0-39-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11
ressources: irq:17 portE/S:d000(taille=256) mémoire:f7c00000-f7c03fff
Dernière modification par arzavapi (Le 30/04/2018, à 21:50)
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#106 Le 01/05/2018, à 12:06
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Personne pour m'aider un peu ? La "question" est devenue trop complexe ?
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#107 Le 01/05/2018, à 12:57
- xubu1957
Re : "the system is running low card graphics" ? [non résolu]
Bonjour,
Tente :
sudo modprobe rtl8723ae
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#108 Le 01/05/2018, à 13:05
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Merci xubu1957
Vous m'avez déjà posé cette "question" en #104
L'écriture ne donne rien :
~$ sudo modprobe rtl8723ae
[sudo] Mot de passe de pierre :
Dernière modification par arzavapi (Le 01/05/2018, à 13:05)
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#109 Le 01/05/2018, à 13:09
- xubu1957
Re : "the system is running low card graphics" ? [non résolu]
C'était moi, et j'avais demandé, par erreur pour un rtl8723Be au lieu d'un AE.
Il faudrait tenter :
Bonjour,
Au vu de ce fil : http://askubuntu.com/questions/706557/m … 513#709513
on télécharge d’abord les sources du dépôt :
git clone git@github.com:lwfinger/rtlwifi_new.git
Puis on compile, et on installe le module :
make all
sudo make install
on enlève l'ancien module
sudo rmmod rtl8723ae
avec prise en compte du modèle de l'ordinateur
sudo modprobe rtl8723ae msi=1
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#110 Le 01/05/2018, à 14:45
- moko138
Re : "the system is running low card graphics" ? [non résolu]
Puisque tu as réinstallé avec un noyau 4.13, il faut déjà appliquer ./viewtopic.php?id=2016728.
Fais-le,
redémarre,
et redonne un rapport wificheck complet.
Et puisque tu as une clef
RTL8723AE PCIe Wireless Network Adapter [10ec:8723]
il y aura sans doute des réglages complémentaires à faire.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#111 Le 01/05/2018, à 15:05
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
xubu1957
git clone git@github.com:lwfinger/rtlwifi_new.git
Clonage dans 'rtlwifi_new'...
The authenticity of host 'github.com (192.30.253.113)' can't be established.
RSA key fingerprint is SHA256:nThbg6kXUpJWGl7E1IGOCspRomTxdCARLviKw6E5SY8.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'github.com,192.30.253.113' (RSA) to the list of known hosts.
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ sudo make install
make: *** Aucune règle pour fabriquer la cible « install ». Arrêt.
Comment faire ?
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#112 Le 01/05/2018, à 15:12
- xubu1957
Re : "the system is running low card graphics" ? [non résolu]
Je viens de trouver cet article > verification-automatique-des-fingerprint-ssh
Mais après, j'avoue que je n'ai pas compris.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#113 Le 01/05/2018, à 15:22
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
moko138
j'ai passé l'écriture demandée et je n'ai eu pas eu la possibilité d'y répondre (il y a un <Ok> qui n'est pas en rouge donc inertej)
Outil de configuration des paquets
┌──────────────────────┤ Configuration de resolvconf ├──────────────────────┐
│ │
│ The resolvconf package contains the infrastructure required for dynamic
│ updating of the resolver configuration file. Part of the necessary
│ infrastructure is a symbolic link from /etc/resolv.conf to
│ /run/resolvconf/resolv.conf. If you choose this option then this link
│ will be created; the existing /etc/resolv.conf file will be preserved as
│ /etc/resolvconf/resolv.conf.d/original, and will be restored if this
│ package is removed.
│
│ Declining this option will prevent future installations from recreating
│ the symbolic link and therefore the resolver configuration file will not
│ be dynamically updated. Dynamic updating can then be activated following
│ instructions in the README file.
│
│ The presence of resolvconf can affect the behavior of other programs, so
│
│ <Ok>
│ │
└───────────────────────────────────────────────────────────────────────────┘
Comment faire ?
Mon cas doit être "chiant" !!!
Dernière modification par arzavapi (Le 01/05/2018, à 15:24)
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#114 Le 01/05/2018, à 15:24
- moko138
Re : "the system is running low card graphics" ? [non résolu]
Touche "Tabulation" pour déplacer le curseur.
Ensuite : valider.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#115 Le 01/05/2018, à 15:39
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
moko138
wificheck complet après l'opération demandée :
~$ wget -N -t 5 -T 10 https://framagit.org/cracolinux/wificheck/raw/master/wificheck && chmod +x wificheck && ./wificheck
--2018-05-01 15:37:06-- https://framagit.org/cracolinux/wificheck/raw/master/wificheck
Résolution de framagit.org (framagit.org)… 2a01:4f8:200:1302::42, 144.76.206.42
Connexion à framagit.org (framagit.org)|2a01:4f8:200:1302::42|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 2012 (2,0K) [text/plain]
Enregistre : «wificheck»
wificheck 100%[===================>] 1,96K --.-KB/s ds 0s
En-tête de dernière modification manquant — horodatage arrêté.
2018-05-01 15:37:06 (143 MB/s) - «wificheck» enregistré [2012/2012]
[sudo] Mot de passe de pierre :
lo no wireless extensions.
enp3s0 no wireless extensions.
wlp4s0 Interface doesn't support scanning : Device or resource busy
lo Interface doesn't support scanning.
enp3s0 Interface doesn't support scanning.
./wificheck: ligne 74: nm-tool : commande introuvable
Syntaxe : nmcli connection { COMMAND | help }
COMMAND := { show | up | down | add | modify | edit | delete | monitor | reload | load }
show [--active] [--order <order spec>]
show [--active] [id | uuid | path | apath] <ID> ...
up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [passwd-file <file with passwords>]
down [id | uuid | path | apath] <ID> ...
add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]
modify [--temporary] [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+
clone [--temporary] [id | uuid | path ] <ID> <new name>
edit [id | uuid | path] <ID>
edit [type <new_con_type>] [con-name <new_con_name>]
delete [id | uuid | path] <ID>
monitor [id | uuid | path] <ID> ...
reload
load <filename> [ <filename>... ]
import [--temporary] type <type> file <file to import>
export [id | uuid | path] <ID> [<output file>]
Erreur : « status » n'est pas une commande « connection » valide.
Le fichier wificheck.log a été crée dans /home/pierre
Vous n'avez plus qu'à copier/coller son contenu sur le forum
accès →→ file://home/pierre/wificheck.log
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#116 Le 01/05/2018, à 15:42
- moko138
Re : "the system is running low card graphics" ? [non résolu]
Suis pas devin. As-tu appliqué la réponse #114 ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#117 Le 01/05/2018, à 15:52
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Oui moko138 j'ai tout fait !!!!
EXCELLLLLLLLLLLENT CA MARCHE ! J'ai retrouvé mon wifi normalement !!!! Ca baigne !!!
MERCI - MERCI - MERCI !!!
(dommage d'être si loin je t'aurais bien offert une 'tite bière, surtout après tous ces essais et ces commandes restées sans succès)
Merci encore...
Dernière modification par arzavapi (Le 02/05/2018, à 15:22)
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#118 Le 02/05/2018, à 07:50
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Petite précision xubu1957 moko138 naziel
Mon ordi a redémarré une fois avec "the system is running low card graphics"...
Je m'étais aperçu que dans les paramètres sytème "autres logiciels", "Pilotes Partenaires" n'était pas coché -je l'ai donc coché-
En redémarrant il m'a donc fait " "the system is running low card graphics"
Mais aujourd'hui ça a l'air de fonctionner normalement -sauf que je n'ai PLUS de connection ETHERNET
A présent je vois que "pilotes de périphériques restricted" est coché dans logiciel ubuntu est décoché -faut il le cocher ???-
Je précise que le wifi fonctionne, mais que je n'ai PLUS DE CONNECTION ETHERNET pourquoi ???
Merci de vos réponses
:~$ iwconfig
enp3s0 no wireless extensions.
lo no wireless extensions.
wlp4s0 IEEE 802.11 ESSID:"freeboxSUQSHL"
Mode:Managed Frequency:2.462 GHz Access Point: 8A:EC:F5:0F:6E:64
Bit Rate=15 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:on
Link Quality=70/70 Signal level=-28 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:11 Missed beacon:0
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ ifconfig
enp3s0 Link encap:Ethernet HWaddr d8:cb:8a:82:e9:d9
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:19
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
Packets reçus:780 erreurs:0 :0 overruns:0 frame:0
TX packets:780 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:70639 (70.6 KB) Octets transmis:70639 (70.6 KB)
wlp4s0 Link encap:Ethernet HWaddr 28:c2:dd:e9:c2:7b
inet adr:192.168.0.10 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: 2a01:e35:2f4b:5490:9b1:a296:a87c:3a68/64 Scope:Global
adr inet6: fe80::22f:690f:b29:3f18/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:7281 erreurs:0 :0 overruns:0 frame:0
TX packets:6349 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:7837937 (7.8 MB) Octets transmis:889004 (889.0 KB)
Dernière modification par arzavapi (Le 02/05/2018, à 12:21)
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#119 Le 02/05/2018, à 13:48
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Merci de me répondre
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#120 Le 02/05/2018, à 16:00
- moko138
Re : "the system is running low card graphics" ? [non résolu]
Attention !
Il faut d'abord refaire un wifcheck, celui réalisé avant le #117 n'est plus à jour !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#121 Le 02/05/2018, à 18:23
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Bonjour
Je suis vraiment désolé de vous importuner.
Quand j'ai démarré mon ordi j'ai vu le tableau "the system is running low card graphics" et il n'y avait plus de connexion visible, ni ethernet ni wifi. C'est en branchant le cable que c'est revenu.
Je donne le wificheck (et après je pose 2 questions)
~$ wget -N -t 5 -T 10 https://framagit.org/cracolinux/wificheck/raw/master/wificheck && chmod +x wificheck && ./wificheck
--2018-05-02 18:08:41-- https://framagit.org/cracolinux/wificheck/raw/master/wificheck
Résolution de framagit.org (framagit.org)… 2a01:4f8:200:1302::42, 144.76.206.42
Connexion à framagit.org (framagit.org)|2a01:4f8:200:1302::42|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 2012 (2,0K) [text/plain]
Enregistre : «wificheck»
wificheck 100%[===================>] 1,96K --.-KB/s ds 0s
En-tête de dernière modification manquant — horodatage arrêté.
2018-05-02 18:08:42 (134 MB/s) - «wificheck» enregistré [2012/2012]
[sudo] Mot de passe de pierre :
lo no wireless extensions.
enp3s0 no wireless extensions.
lo Interface doesn't support scanning.
enp3s0 Interface doesn't support scanning.
./wificheck: ligne 74: nm-tool : commande introuvable
Syntaxe : nmcli connection { COMMAND | help }
COMMAND := { show | up | down | add | modify | edit | delete | monitor | reload | load }
show [--active] [--order <order spec>]
show [--active] [id | uuid | path | apath] <ID> ...
up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [passwd-file <file with passwords>]
down [id | uuid | path | apath] <ID> ...
add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]
modify [--temporary] [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+
clone [--temporary] [id | uuid | path ] <ID> <new name>
edit [id | uuid | path] <ID>
edit [type <new_con_type>] [con-name <new_con_name>]
delete [id | uuid | path] <ID>
monitor [id | uuid | path] <ID> ...
reload
load <filename> [ <filename>... ]
import [--temporary] type <type> file <file to import>
export [id | uuid | path] <ID> [<output file>]
Erreur : « status » n'est pas une commande « connection » valide.
Le fichier wificheck.log a été crée dans /home/pierre
Vous n'avez plus qu'à copier/coller son contenu sur le forum
accès →→ file://home/pierre/wificheck.log
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$
Dernière modification par arzavapi (Le 02/05/2018, à 18:24)
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#122 Le 02/05/2018, à 18:27
- xubu1957
Re : "the system is running low card graphics" ? [non résolu]
Le fichier wificheck.log a été crée dans /home/pierre
Vous n'avez plus qu'à copier/coller son contenu sur le forum
Tu as donné le script, il faut chercher ton fichier wificheck, et le copier/coller sur le forum.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#123 Le 02/05/2018, à 18:38
- arzavapi
Re : "the system is running low card graphics" ? [non résolu]
Désolé je ne comprends pas xubu1957 cette écriture que j'ai posé ci-dessus n'est pas suffisante ?
wget -N -t 5 -T 10 https://framagit.org/cracolinux/wificheck/raw/master/wificheck && chmod +x wificheck && ./wificheck
~$ wget -N -t 5 -T 10 https://framagit.org/cracolinux/wificheck/raw/master/wificheck && chmod +x wificheck && ./wificheck
--2018-05-02 18:36:20-- https://framagit.org/cracolinux/wificheck/raw/master/wificheck
Résolution de framagit.org (framagit.org)… 2a01:4f8:200:1302::42, 144.76.206.42
Connexion à framagit.org (framagit.org)|2a01:4f8:200:1302::42|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 2012 (2,0K) [text/plain]
Enregistre : «wificheck»
wificheck 100%[===================>] 1,96K --.-KB/s ds 0s
En-tête de dernière modification manquant — horodatage arrêté.
2018-05-02 18:36:21 (132 MB/s) - «wificheck» enregistré [2012/2012]
[sudo] Mot de passe de pierre :
lo no wireless extensions.
enp3s0 no wireless extensions.
lo Interface doesn't support scanning.
enp3s0 Interface doesn't support scanning.
./wificheck: ligne 74: nm-tool : commande introuvable
Syntaxe : nmcli connection { COMMAND | help }
COMMAND := { show | up | down | add | modify | edit | delete | monitor | reload | load }
show [--active] [--order <order spec>]
show [--active] [id | uuid | path | apath] <ID> ...
up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [passwd-file <file with passwords>]
down [id | uuid | path | apath] <ID> ...
add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]
modify [--temporary] [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+
clone [--temporary] [id | uuid | path ] <ID> <new name>
edit [id | uuid | path] <ID>
edit [type <new_con_type>] [con-name <new_con_name>]
delete [id | uuid | path] <ID>
monitor [id | uuid | path] <ID> ...
reload
load <filename> [ <filename>... ]
import [--temporary] type <type> file <file to import>
export [id | uuid | path] <ID> [<output file>]
Erreur : « status » n'est pas une commande « connection » valide.
Le fichier wificheck.log a été crée dans /home/pierre
Vous n'avez plus qu'à copier/coller son contenu sur le forum
accès →→ file://home/pierre/wificheck.log
Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM 6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go
Hors ligne
#124 Le 02/05/2018, à 18:43
- xubu1957
Re : "the system is running low card graphics" ? [non résolu]
Copiez et collez cette ligne de code dans un terminal pour installer et lancer le script en une seule séance :
wget -N -t 5 -T 10 https://framagit.org/cracolinux/wificheck/raw/master/wificheck && chmod +x wificheck && ./wificheck
Vous trouverez ensuite un fichier wificheck.log dans votre répertoire personnel, collez l'intégralité de son contenu dans votre discussion.
Voir > [script] Récolte des infos WIFI de ! À lire avant de poster !
Dernière modification par xubu1957 (Le 02/05/2018, à 18:45)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#125 Le 02/05/2018, à 18:48
- moko138
Re : "the system is running low card graphics" ? [non résolu]
cette écriture que j'ai posé ci-dessus n'est pas suffisante ?
Non puisque wificheck, à la fin, t'a dit
(il faut lire les réponses du système) :
Le fichier wificheck.log a été crée dans /home/pierre Vous n'avez plus qu'à copier/coller son contenu sur le forum
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne