#26 Le 17/09/2018, à 19:41
- Caribou22
Re : [Résolu] choix pc portable
Hop, c'est commandé (et ils ont l'air sérieux)
Le prix est passé de 151€ à 199€ depuis mon post. J'espère que tu as pu commander avant
Hors ligne
#27 Le 20/09/2018, à 18:19
- Nuliel
Re : [Résolu] choix pc portable
Je l'ai payé 151 euros mais il est pas arrivé et devrait être arrivé d'après le suivi de commande.
Et j'ai enfin internet (depuis le 20 août je fais soit sans soit avec un hotspot pourri qui marche quand il veut)
Hors ligne
#28 Le 21/09/2018, à 10:20
- Nuliel
Re : [Résolu] choix pc portable
En moyenne faut compter combien de temps pour la livraison?
Hors ligne
#29 Le 21/09/2018, à 10:34
- NicoApi73
Re : [Résolu] choix pc portable
Salut,
As tu eu un lien vers le suivi du transporteur? Si ce n'est pas fait, informe rapidement le vendeur.
J'ai déjà vécu une situation où c'était écrit livré, et même signé par moi, que je n'en ai jamais vu la couleur. Comme j'avais commandé par un des GAFA, ça a été vite réglé (et ils ont changé de transporteur...)
Hors ligne
#30 Le 21/09/2018, à 10:38
- Nuliel
Re : [Résolu] choix pc portable
Salut Nico,
Oui, le pc était sensé arriver le 18 ou 19, et depuis j'ai pas d'estimation du temps d'attente pour recevoir le pc.
D'après dpd il est toujours dans le 92, mais j'aimerais prévoir pour être là quand il arrivera
J'ai contacté backmarket et dpd, j'attends une réponse plus précise.
Hors ligne
#31 Le 21/09/2018, à 11:09
- Caribou22
Re : [Résolu] choix pc portable
Normalement tu aurais dû l'avor en 3 jours max. Mais j'ai déjà eu une commande sur Backmarket qui était arrivée après 1 mois environ.
Hors ligne
#32 Le 21/09/2018, à 11:18
- Nuliel
Re : [Résolu] choix pc portable
Je viens de les appeler, backmarket va contacter le vendeur et j'aurai une réponse sous 1 jour ouvré (comprendre lundi).
J'espérais avoir ce pc pour la semaine prochaine
Hors ligne
#33 Le 21/09/2018, à 12:25
- Nuliel
Re : [Résolu] choix pc portable
J'ai eu une réponse du vendeur: l'envoi a pris du retard et devrait arriver lundi prochain (et ils me remboursent les frais de port). Je pourrai le tester que vendredi prochain
Hors ligne
#34 Le 21/09/2018, à 12:29
- xubu1957
Re : [Résolu] choix pc portable
[HS]Bonjour,
Avec une connexion potable ?
[/HS]
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#35 Le 21/09/2018, à 12:34
- Nuliel
Re : [Résolu] choix pc portable
@xubu1957: oui, free a envoyé un technicien qui a trouvé le problème (problème de prise téléphonique).
Conclusion: j'ai une connexion bien plus que potable: 34 ms en ping, 16.87 Mbps en descendant, 1.06 Mbps en montant
J'ai téléchargé rocket league à la vitesse max de 2.30 Mo/s, ça change des 500 ko/s que j'ai le week end!
Dernière modification par Nuliel (Le 21/09/2018, à 12:40)
Hors ligne
#36 Le 22/09/2018, à 12:13
- Nuliel
Re : [Résolu] choix pc portable
C'est bon Caribou22, tu m'as converti aux thinkpad
Il est top!
Dernière modification par Nuliel (Le 22/09/2018, à 12:13)
Hors ligne
#37 Le 22/09/2018, à 12:15
- NicoApi73
Re : [Résolu] choix pc portable
Salut,
Tu l'as reçu?
Hors ligne
#38 Le 22/09/2018, à 12:27
- Nuliel
Re : [Résolu] choix pc portable
Oui je l'ai reçu il y a peu de temps
Oui, je viens de réduire la partition windows 7 et j'ai installé xubuntu, là je fais les mises à jour.
Le clavier est top, la taille est top, le poids est top! Je suis fan!
Dernière modification par Nuliel (Le 22/09/2018, à 12:28)
Hors ligne
#39 Le 22/09/2018, à 13:08
- Caribou22
Re : [Résolu] choix pc portable
C'est bon Caribou22, tu m'as converti aux thinkpad
Il est top!
Tu ne voudras plus rien d'autre maintenant, haha
Tu as quelle autonomie sous Windows et Xubuntu ?
Sinon j'ai le même et pour info, il y a un emplacement pour SSD mSATA. Très pratique le jour où tu voudras l'upgrader (Le mien a Debian 9 Xfce sur un SSD mSATA et Windows 7 sur le HDD d'origine.)
Hors ligne
#40 Le 22/09/2018, à 13:14
- Nuliel
Re : [Résolu] choix pc portable
Aucune idée pour l'autonomie, là il est chargé à bloc, je vais le débrancher et le laisser décharger
Ok pour le ssd, je viens justement de faire un rapport smart du disque dur, il est pas neuf mais c'était à prévoir
Edit: si je mets linux sur un ssd et windows sur le hdd, si je démarre sur linux est ce que je hdd est quand même mis en rotation?
Dernière modification par Nuliel (Le 22/09/2018, à 13:21)
Hors ligne
#41 Le 22/09/2018, à 13:22
- NicoApi73
Re : [Résolu] choix pc portable
Jette un coup d'oeil à ce que retourne le noyau :
dmesg -lerr
C'est une 18.04.1 que tu as installée. Peux tu donner l'empreinte mémoire au démarrage, STP?
free -m
Hors ligne
#42 Le 22/09/2018, à 13:25
- xubu1957
Re : [Résolu] choix pc portable
Bonjour,
Pense à tlp
sudo apt install tlp
et :
Si vous avez un thinkpad (UNIQUEMENT SI), ajoutez :
sudo apt install tp-smapi-dkms acpi-call-dkms
C3 > [url=[modéré : pas d’auto-pub, merci]-mon-optimisation-personnalisation-xubuntu-et-autres-variantes/]dolys.fr/forums/topic/tuto-mon-optimisation-personnalisation-xubuntu-et-autres-variantes[/url]
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#43 Le 22/09/2018, à 13:27
- Nuliel
Re : [Résolu] choix pc portable
Rien de spécial n'est renvoyé par dmesg -lerr (deux lignes seulement en rapport avec le wifi)
J'ai pas redémarré mais voici les retours
total utilisé libre partagé tamp/cache disponible
Mem: 3831 356 2261 36 1213 3207
Partition d'échange: 2047 0 2047
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-34-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus Thin
Device Model: ST320LT007-9ZV142
Serial Number: W0Q1SQFH
LU WWN Device Id: 5 000c50 0442723a0
Firmware Version: 0004LVM1
User Capacity: 320072933376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7242 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Sep 22 13:15:57 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 64) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x303b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 076 034 Pre-fail Always - 196115000
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1259
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 13056904515
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7848 (249 122 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1253
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 3491
188 Command_Timeout 0x0032 100 090 000 Old_age Always - 84
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 055 045 Old_age Always - 36 (Min/Max 36/37)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 125
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17
193 Load_Cycle_Count 0x0032 078 078 000 Old_age Always - 45096
194 Temperature_Celsius 0x0022 036 045 000 Old_age Always - 36 (0 12 0 0 0)
195 Hardware_ECC_Recovered 0x001a 049 035 000 Old_age Always - 196115000
196 Reallocated_Event_Count 0x000f 092 092 030 Pre-fail Always - 7666 (15772 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
250 Read_Error_Retry_Rate 0x0000 001 001 000 Old_age Offline - 35406
251 Unknown_Attribute 0x0000 100 001 000 Old_age Offline - 849
252 Unknown_Attribute 0x0000 100 001 000 Old_age Offline - 0
254 Free_Fall_Sensor 0x0032 001 001 000 Old_age Always - 22
SMART Error Log Version: 1
ATA Error Count: 3491 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3491 occurred at disk power-on lifetime: 2905 hours (121 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 44 c2 5f 00 Error: UNC at LBA = 0x005fc244 = 6275652
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 01 44 c2 5f 40 00 00:09:03.014 READ VERIFY SECTOR(S) EXT
ec 00 01 00 00 00 00 00 00:09:03.010 IDENTIFY DEVICE
ec 00 01 00 00 00 00 00 00:09:03.008 IDENTIFY DEVICE
27 00 00 00 00 00 e0 00 00:09:03.007 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:09:02.970 IDENTIFY DEVICE
Error 3490 occurred at disk power-on lifetime: 2905 hours (121 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 43 c2 5f 00 Error: UNC at LBA = 0x005fc243 = 6275651
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 01 43 c2 5f 40 00 00:08:58.328 READ VERIFY SECTOR(S) EXT
ec 00 01 00 00 00 00 00 00:08:58.325 IDENTIFY DEVICE
ec 00 01 00 00 00 00 00 00:08:58.323 IDENTIFY DEVICE
27 00 00 00 00 00 e0 00 00:08:58.322 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:08:58.320 IDENTIFY DEVICE
Error 3489 occurred at disk power-on lifetime: 2905 hours (121 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 42 c2 5f 00 Error: UNC at LBA = 0x005fc242 = 6275650
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 01 42 c2 5f 40 00 00:08:53.642 READ VERIFY SECTOR(S) EXT
ec 00 01 00 00 00 00 00 00:08:53.639 IDENTIFY DEVICE
ec 00 01 00 00 00 00 00 00:08:53.636 IDENTIFY DEVICE
27 00 00 00 00 00 e0 00 00:08:53.636 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:08:53.598 IDENTIFY DEVICE
Error 3488 occurred at disk power-on lifetime: 2905 hours (121 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 41 c2 5f 00 Error: UNC at LBA = 0x005fc241 = 6275649
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 01 41 c2 5f 40 00 00:08:48.949 READ VERIFY SECTOR(S) EXT
ec 00 01 00 00 00 00 00 00:08:48.945 IDENTIFY DEVICE
ec 00 01 00 00 00 00 00 00:08:48.943 IDENTIFY DEVICE
27 00 00 00 00 00 e0 00 00:08:48.942 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:08:48.940 IDENTIFY DEVICE
Error 3487 occurred at disk power-on lifetime: 2905 hours (121 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 40 c2 5f 00 Error: UNC at LBA = 0x005fc240 = 6275648
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 01 40 c2 5f 40 00 00:08:44.265 READ VERIFY SECTOR(S) EXT
ec 00 01 00 00 00 00 00 00:08:44.259 IDENTIFY DEVICE
ec 00 01 00 00 00 00 00 00:08:44.257 IDENTIFY DEVICE
42 00 01 3f c2 5f 40 00 00:08:44.255 READ VERIFY SECTOR(S) EXT
ec 00 01 00 00 00 00 00 00:08:44.251 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0x50) Completed: read failure 90% 2905 6275648
# 2 Short offline Completed: read failure 90% 2905 6275648
# 3 Vendor (0x50) Completed: read failure 90% 2905 6275648
# 4 Short offline Completed: read failure 90% 2905 6275648
# 5 Vendor (0x50) Completed: read failure 90% 2904 6275648
# 6 Short offline Completed: read failure 90% 2904 6275648
# 7 Vendor (0x50) Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Faut que je configure le clavier par contre (pas de copier coller pour l'instant)
Hors ligne
#44 Le 22/09/2018, à 13:34
- Nuliel
Re : [Résolu] choix pc portable
Merci xubu1957, j'ai fait les manips proposées et j'ai redémarré.
Hors ligne
#45 Le 22/09/2018, à 13:42
- Nuliel
Re : [Résolu] choix pc portable
Tu as mis quoi comme disposition du clavier caribou22?
Hors ligne
#46 Le 22/09/2018, à 13:43
- Caribou22
Re : [Résolu] choix pc portable
Heu je ne me souviens plus précisément
Là je suis dessus. Il y a une commande qui permet de la connaitre ?
Hors ligne
#47 Le 22/09/2018, à 13:48
- Nuliel
Re : [Résolu] choix pc portable
Tu peux regarder dans les paramètres -> clavier -> disposition si une disposition est choisie.
Je sais pas si
sudo dpkg-reconfigure keyboard-configuration
va te faire perdre la configuration
Edit: c'est pas souris mais clavier...
Dernière modification par Nuliel (Le 22/09/2018, à 13:52)
Hors ligne
#48 Le 22/09/2018, à 13:57
- Nuliel
Re : [Résolu] choix pc portable
J'ai rien dit, j'ai confondu deux touches...
J'ai confondu ctrl et fn c'est plus difficile du coup de faire des copier coller
Dernière modification par Nuliel (Le 22/09/2018, à 14:09)
Hors ligne
#49 Le 22/09/2018, à 15:24
- Nuliel
Re : [Résolu] choix pc portable
Un ssd comme https://www.amazon.fr/Kingston-UV500-ms … +msata+120 est bien compatible avec le pc?
Et est ce que le hdd sera en mis en rotation si je ne l'utilise pas?
Hors ligne
#50 Le 22/09/2018, à 17:00
- Nuliel
Re : [Résolu] choix pc portable
Bon, je l'ai laissé allumé pour voir combien de temps il pouvait rester sur batterie, depuis 13h15 il est en route, il est 17h et ubuntu m'annonce qu'il reste 50% de batterie.
Hors ligne