Contenu | Rechercher | Menus

Annonce

T-shirt Seiche Cosmic, Série limitée

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Ubuntu 18.10
T-shirt Ubuntu-FR « Seiche Cosmique » en série limitée ! Prix spécial pré-vente (15€) jusqu'au 4 novembre 2018.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Heure d'hiver: N'oubliez pas de décochez l'heure d'été dans votre profil.

#1 Le 11/10/2018, à 22:11

Coco76

wifi non dectecter apres imigration 18.04

Bonsoir comme indiquer sur mon Titres est apres avoir essayer toute sorte de commande dispo sur ce sujet je ne peux toujours pas

me connecter avec ma wifi elle ne reconnait pas la cleè , jutilise un cable internet quelqun pourait il maidez Merci .

Hors ligne

#2 Le 11/10/2018, à 22:13

xubu1957

Re : wifi non dectecter apres imigration 18.04

Bonjour,

Il faut fournir, en te servant du  Retour utilisable de commande, un wificheck rassemblant les informations > Configuration wifi.

Nota : un fichier wificheck.log est créé dans votre répertoire personnel, collez l'intégralité de son contenu dans votre discussion.

cqfd93 a écrit :

Astuce pour copier / coller sans erreur :

  • triple clic gauche pour sélectionner et copier une ligne entière

  • clic molette pour coller dans le terminal


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#3 Le 11/10/2018, à 22:40

Coco76

Re : wifi non dectecter apres imigration 18.04

Bonsoir ! Merci de votre aide . Voila ,

>>    cat /etc/lsb-release 

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS"

>>    lsusb 

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1d57:fa20 Xenta 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

>>    lspci -k -nn | grep -A 3 -i net 

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
	Subsystem: Micro-Star International Co., Ltd. [MSI] RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1462:7836]
	Kernel driver in use: r8169
	Kernel modules: r8169

>>    sudo lshw -C network 

  *-network
       description: Ethernet interface
       produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       fabriquant: Realtek Semiconductor Co., Ltd.
       identifiant matériel: 0
       information bus: pci@0000:02:00.0
       nom logique: eth0
       version: 06
       numéro de série: 44:8a:5b:5f:5d:ef
       taille: 1Gbit/s
       capacité: 1Gbit/s
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.12 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
       ressources: irq:18 portE/S:e000(taille=256) mémoire:f7c04000-f7c04fff mémoire:f7c00000-f7c03fff

>>    lsmod 

Module                  Size  Used by
nls_utf8               16384  1
isofs                  40960  1
intel_rapl             20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
coretemp               16384  0
kvm_intel             204800  0
kvm                   520192  1 kvm_intel
joydev                 20480  0
snd_hda_codec_realtek    94208  1
snd_hda_codec_generic    69632  1 snd_hda_codec_realtek
irqbypass              16384  1 kvm
snd_hda_intel          36864  6
intel_cstate           16384  0
snd_hda_codec         106496  3 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_realtek
intel_rapl_perf        16384  0
input_leds             16384  0
snd_hda_core           65536  4 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep              16384  1 snd_hda_codec
serio_raw              16384  0
snd_pcm                86016  3 snd_hda_intel,snd_hda_codec,snd_hda_core
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            28672  1 snd_seq_midi
snd_seq                57344  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              28672  2 snd_seq,snd_pcm
snd                    69632  22 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
mei_me                 28672  0
mei                    77824  1 mei_me
intel_smartconnect     16384  0
mac_hid                16384  0
lpc_ich                24576  0
soundcore              16384  1 snd
shpchp                 32768  0
sch_fq_codel           20480  2
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                45056  3 lp,parport_pc,ppdev
ip_tables              20480  0
x_tables               28672  1 ip_tables
autofs4                40960  2
crypto_simd            16384  0
cryptd                 24576  1 crypto_simd
aes_i586               20480  853
algif_skcipher         16384  0
af_alg                 20480  1 algif_skcipher
dm_crypt               32768  1
hid_generic            16384  0
usbhid                 49152  0
hid                    98304  2 hid_generic,usbhid
i915                 1282048  22
i2c_algo_bit           16384  1 i915
drm_kms_helper        151552  1 i915
mxm_wmi                16384  0
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   339968  15 i915,drm_kms_helper
ahci                   36864  3
crc32_pclmul           16384  0
r8169                  81920  0
libahci                32768  1 ahci
mii                    16384  1 r8169
wmi                    20480  1 mxm_wmi
video                  40960  1 i915
>>    iwconfig 


>>    ifconfig -a 

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.12  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::64d5:caa6:7cbe:75f8  prefixlen 64  scopeid 0x20<link>
        inet6 2a01:cb06:2af:6b00:e870:5d6c:1a06:e7f2  prefixlen 64  scopeid 0x0<global>
        inet6 2a01:cb06:2af:6b00:e7cb:7d32:a66e:ade2  prefixlen 64  scopeid 0x0<global>
        ether 44:8a:5b:5f:5d:ef  txqueuelen 1000  (Ethernet)
        RX packets 51777  bytes 56056134 (56.0 MB)
        RX errors 0  dropped 4  overruns 0  frame 0
        TX packets 17135  bytes 2102954 (2.1 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Boucle locale)
        RX packets 14675  bytes 1004349 (1.0 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 14675  bytes 1004349 (1.0 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


>>    sudo iwlist scan 


>>    uname -r -m 

4.15.0-36-generic i686

>>    cat /etc/network/interfaces 

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

>>    nm-tool 


>>    nmcli dev wifi 


>>    nmcli connection list (< 15.04) ou nmcli connection show (>= 15.04) 

NAME                  UUID                                  TYPE      DEVICE 
Ethernet automatique  7f8cedb0-07f9-42d9-98b8-9a6dc0284384  ethernet  eth0   

>>    nmcli connection status 


>>    sudo rfkill list 

Dernière modification par Coco76 (Le 11/10/2018, à 22:44)

Hors ligne

#4 Le 12/10/2018, à 05:30

xubu1957

Re : wifi non dectecter apres imigration 18.04

Bonjour,

Je ne vois pas de clé Wi-Fi dans le retour de lsusb ?

Tu l'avais branchée avant de lancer le wificheck ?


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#5 Le 12/10/2018, à 15:40

Coco76

Re : wifi non dectecter apres imigration 18.04

bonjour , oui elle est brancher en meme temps que le cable ethernet

Hors ligne

#6 Le 12/10/2018, à 15:44

xubu1957

Re : wifi non dectecter apres imigration 18.04

Il n'y a pas un petit interrupteur ?

Quelle marque et quel modèle, cette clé wifi ?


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#7 Le 12/10/2018, à 15:51

Coco76

Re : wifi non dectecter apres imigration 18.04

Il n'y a pas un petit interrupteur ?   C'est a dire ? c'est une petite cleè usb taille 6centimetre au plus

Quelle marque et quel modèle, cette clé wifi ?  marque D-Link j'ai cela en refèrènce si ça peux vous aider GO-USB-N
150 ,ensuite j'ai le numero MAC est dautre chiffres ....

Hors ligne

#8 Le 12/10/2018, à 15:59

xubu1957

Re : wifi non dectecter apres imigration 18.04

Ce modèle > D-Link-GO-USB-N150 ?


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#9 Le 12/10/2018, à 16:01

Coco76

Re : wifi non dectecter apres imigration 18.04

xubu1957 a écrit :

Ce modèle > D-Link-GO-USB-N150 ?

ça lui ressemble fortemment sauf que la mienne c'est D-Link touts court

Hors ligne

#10 Le 12/10/2018, à 16:02

xubu1957

Re : wifi non dectecter apres imigration 18.04

commentaire 28/07/2017 a écrit :

The only problem with this item is the lack of instructions for Linux. It does work perfectly once the Ethernet cable is disconnected. The accompanying disk is for Windows users. In Linux Mint Cinnamon, you just click on the network symbol, select your network, and enter the password. No other actions required. It is a fast WiFi connection. I can't really see it being any slower than the direct connection to my router.


Le seul problème avec cet élément est le manque d'instructions pour Linux. Cela fonctionne parfaitement une fois que le câble Ethernet est déconnecté. Le disque fourni est destiné aux utilisateurs Windows. Dans Linux Mint Cinnamon, il vous suffit de cliquer sur le symbole du réseau, de sélectionner votre réseau et de saisir le mot de passe. Aucune autre action requise. C'est une connexion WiFi rapide. Je ne vois pas vraiment que ce soit plus lent que la connexion directe à mon routeur.


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#11 Le 12/10/2018, à 16:08

inbox

Re : wifi non dectecter apres imigration 18.04

Salut,

La clef wifi est reconnue dans lsusb :

1d57:fa20 Xenta 

Le problème est qu'elle n'est pas connue du gestionnaire de réseau et n'apparaît donc pas dans les retours des autres commandes.

Voir le contenu de :

dmesg

Essayer de connecter la clef sur un autre port USB et refaire le wifickeck.

A+


Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Linux user 449594

En ligne

#12 Le 12/10/2018, à 16:13

Coco76

Re : wifi non dectecter apres imigration 18.04

1539358088.png


en wifi ca fonctionne toujours pas .

Dernière modification par Coco76 (Le 12/10/2018, à 16:40)

Hors ligne

#13 Le 12/10/2018, à 16:48

xubu1957

Re : wifi non dectecter apres imigration 18.04

Regarde > la méthode de moko138 pour poster une image.

(edit= messages regroupés)

_ _ _

Tu as vu le message #11 d'inbox ?

Dernière modification par xubu1957 (Le 12/10/2018, à 16:50)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#14 Le 12/10/2018, à 16:49

Coco76

Re : wifi non dectecter apres imigration 18.04

inbox a écrit :

Salut,

La clef wifi est reconnue dans lsusb :

1d57:fa20 Xenta 

Le problème est qu'elle n'est pas connue du gestionnaire de réseau et n'apparaît donc pas dans les retours des autres commandes.

Voir le contenu de :

dmesg

Essayer de connecter la clef sur un autre port USB et refaire le wifickeck.

A+

bonjour Merci dabord pour votre aide .

j'ai deja changer de port USB mais elle ne dectecte toujours pas la wifi , j'ai fait une capture dècran plus haut sans cable ethernet , on peux bien voir que la bar de réseau a disparrue , je vais faire une capture dècran avec le cable ethernet on verra en Haut a droite que la barre de reseaux rééaparrait , de plus sur la capture dècrant plus Haut on peut constater que sur le reglage wifi cest écrit aucun ( adptateur wifi dectecter )


el@el-MS-7836:~$ dmesg
[    0.000000] Linux version 4.15.0-36-generic (buildd@lcy01-amd64-026) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #39-Ubuntu SMP Mon Sep 24 16:16:44 UTC 2018 (Ubuntu 4.15.0-36.39-generic 4.15.18)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9365fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9366000-0x00000000d98f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d98f9000-0x00000000d9982fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9983000-0x00000000d9a1dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d9a1e000-0x00000000da5d1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da5d2000-0x00000000da5d2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da5d3000-0x00000000da615fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da616000-0x00000000daa32fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000daa33000-0x00000000daff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daff4000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: MSI MS-7836/C847IS-P33 (MS-7836), BIOS V1.1 03/07/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   5 base 11F800000 mask FFF800000 uncachable
[    0.000000]   6 base 11F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 4014M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000fd730-0x000fd73f] mapped at [(ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x1e3fffff]
[    0.000000] Base memory trampoline at [(ptrval)] 99000 size 16384
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x1dfd8000, 0x1dfd8fff] PGTABLE
[    0.000000] BRK [0x1dfd9000, 0x1dfd9fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31781000-0x34bb7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D9A0F078 00006C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D9A19110 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D9A0F178 009F98 (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000D9A1C080 000040
[    0.000000] ACPI: APIC 0x00000000D9A19220 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000D9A19288 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000D9A192D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000D9A19310 0007CA (v01 Intel_ AoacTabl 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 0x00000000D9A19AE0 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D9A19B18 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D9A19E30 000692 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D9A1A4C8 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 3710MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] BRK [0x1dfda000, 0x1dfdafff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000377fdfff]
[    0.000000]   HighMem  [mem 0x00000000377fe000-0x000000011f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000d9365fff]
[    0.000000]   node   0: [mem 0x00000000d98f9000-0x00000000d9982fff]
[    0.000000]   node   0: [mem 0x00000000da5d2000-0x00000000da5d2fff]
[    0.000000]   node   0: [mem 0x00000000da616000-0x00000000daa32fff]
[    0.000000]   node   0: [mem 0x00000000daff4000-0x00000000daffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[    0.000000] On node 0 totalpages: 1018294
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   Normal zone: 2180 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 791580 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 105 pages
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x81/0x433 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s93068 r0 d29812 u122880
[    0.000000] pcpu-alloc: s93068 r0 d29812 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1016074
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-36-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0011f600)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 3960856K/4073176K available (8829K kernel code, 887K rwdata, 3456K rodata, 1092K init, 848K bss, 112320K reserved, 0K cma-reserved, 3166320K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
                 cpu_entry : 0xffa00000 - 0xffb39000   (1252 kB)
                   pkmap   : 0xff800000 - 0xffa00000   (2048 kB)
                   vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
                     .init : 0xddcf7000 - 0xdde08000   (1092 kB)
                     .data : 0xdd89f528 - 0xddce3d80   (4370 kB)
                     .text : 0xdd000000 - 0xdd89f528   (8829 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] ftrace: allocating 37844 entries in 74 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[    0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 4194304 bytes of page_ext
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 1097.542 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.08 BogoMIPS (lpj=4390168)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024000] mce: CPU supports 7 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.032113] TSC deadline timer enabled
[    0.032118] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.032261] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.032310] ... version:                3
[    0.032312] ... bit width:              48
[    0.032313] ... generic registers:      8
[    0.032315] ... value mask:             0000ffffffffffff
[    0.032317] ... max period:             00007fffffffffff
[    0.032318] ... fixed-purpose events:   3
[    0.032319] ... event mask:             00000007000000ff
[    0.032394] Hierarchical SRCU implementation.
[    0.034140] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.034176] smp: Bringing up secondary CPUs ...
[    0.034351] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.034353] x86: Booting SMP configuration:
[    0.034355] .... node  #0, CPUs:      #1
[    0.004000] Initializing CPU#1
[    0.038563] smp: Brought up 1 node, 2 CPUs
[    0.038563] smpboot: Max logical packages: 1
[    0.038563] smpboot: Total of 2 processors activated (4390.16 BogoMIPS)
[    0.040261] devtmpfs: initialized
[    0.040646] evm: security.selinux
[    0.040647] evm: security.SMACK64
[    0.040649] evm: security.SMACK64EXEC
[    0.040650] evm: security.SMACK64TRANSMUTE
[    0.040651] evm: security.SMACK64MMAP
[    0.040652] evm: security.apparmor
[    0.040653] evm: security.ima
[    0.040655] evm: security.capability
[    0.040717] PM: Registering ACPI NVS region [mem 0xd9983000-0xd9a1dfff] (634880 bytes)
[    0.040717] PM: Registering ACPI NVS region [mem 0xda5d3000-0xda615fff] (274432 bytes)
[    0.040717] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040717] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.040717] pinctrl core: initialized pinctrl subsystem
[    0.040717] RTC time: 14:36:09, date: 10/12/18
[    0.040717] NET: Registered protocol family 16
[    0.040749] audit: initializing netlink subsys (disabled)
[    0.040763] audit: type=2000 audit(1539354969.040:1): state=initialized audit_enabled=0 res=1
[    0.040763] EISA bus registered
[    0.040763] cpuidle: using governor ladder
[    0.040763] cpuidle: using governor menu
[    0.040763] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.040763] ACPI: bus type PCI registered
[    0.040763] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040763] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.040763] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.040763] PCI: Using MMCONFIG for extended config space
[    0.040763] PCI: Using configuration type 1 for base access
[    0.040763] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.044278] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044278] ACPI: Added _OSI(Module Device)
[    0.044278] ACPI: Added _OSI(Processor Device)
[    0.044278] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044278] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044278] ACPI: Added _OSI(Linux-Dell-Video)
[    0.044278] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.044503] ACPI: Executed 1 blocks of module-level executable AML code
[    0.057445] ACPI: Dynamic OEM Table Load:
[    0.057460] ACPI: SSDT 0x00000000F10D1000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.058273] ACPI: Dynamic OEM Table Load:
[    0.058282] ACPI: SSDT 0x00000000F0A79400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.058882] ACPI: Dynamic OEM Table Load:
[    0.058890] ACPI: SSDT 0x00000000F09F4600 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.060163] ACPI: Interpreter enabled
[    0.060208] ACPI: (supports S0 S3 S4 S5)
[    0.060210] ACPI: Using IOAPIC for interrupt routing
[    0.060272] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.060845] ACPI: Enabled 17 GPEs in block 00 to 3F
[    0.078748] ACPI: Power Resource [FN00] (off)
[    0.078943] ACPI: Power Resource [FN01] (off)
[    0.079131] ACPI: Power Resource [FN02] (off)
[    0.079318] ACPI: Power Resource [FN03] (off)
[    0.079504] ACPI: Power Resource [FN04] (off)
[    0.080801] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.080812] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.081355] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.081703] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.081706] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.082783] PCI host bridge to bus 0000:00
[    0.082789] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.082793] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.082797] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.082801] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.082804] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.082807] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.082811] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.082814] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.082818] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.082821] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.082825] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.082843] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.083072] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[    0.083096] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.083108] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.083117] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.083409] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.083446] pci 0000:00:16.0: reg 0x10: [mem 0xf7d0a000-0xf7d0a00f 64bit]
[    0.083553] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.083756] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.083788] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d08000-0xf7d083ff]
[    0.083909] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.084108] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.084142] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
[    0.084255] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.084458] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.084583] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.084786] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.084909] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.085118] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.085150] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
[    0.085271] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.085464] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
[    0.085782] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.085812] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.085824] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.085837] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.085849] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.085861] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.085874] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d06000-0xf7d067ff]
[    0.085940] pci 0000:00:1f.2: PME# supported from D3hot
[    0.086126] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.086155] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
[    0.086186] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.086474] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.086607] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.086652] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.086696] pci 0000:02:00.0: reg 0x18: [mem 0xf7c04000-0xf7c04fff 64bit pref]
[    0.086724] pci 0000:02:00.0: reg 0x20: [mem 0xf7c00000-0xf7c03fff 64bit pref]
[    0.086883] pci 0000:02:00.0: supports D1 D2
[    0.086886] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.096045] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.096053] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.096062] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.096104] pci_bus 0000:00: on NUMA node 0
[    0.097068] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.097192] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.097314] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.097434] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.097553] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.097672] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.097793] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.097911] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.098979] SCSI subsystem initialized
[    0.099037] libata version 3.00 loaded.
[    0.099037] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.099037] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.099037] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.099037] vgaarb: loaded
[    0.099037] ACPI: bus type USB registered
[    0.099037] usbcore: registered new interface driver usbfs
[    0.099037] usbcore: registered new interface driver hub
[    0.099037] usbcore: registered new device driver usb
[    0.099037] EDAC MC: Ver: 3.0.0
[    0.099037] PCI: Using ACPI for IRQ routing
[    0.101941] PCI: pci_cache_line_size set to 64 bytes
[    0.101998] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.102002] e820: reserve RAM buffer [mem 0xd9366000-0xdbffffff]
[    0.102007] e820: reserve RAM buffer [mem 0xd9983000-0xdbffffff]
[    0.102011] e820: reserve RAM buffer [mem 0xda5d3000-0xdbffffff]
[    0.102015] e820: reserve RAM buffer [mem 0xdaa33000-0xdbffffff]
[    0.102018] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.102021] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.102214] NetLabel: Initializing
[    0.102215] NetLabel:  domain hash size = 128
[    0.102217] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.102247] NetLabel:  unlabeled traffic allowed by default
[    0.102284] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.102284] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.105046] clocksource: Switched to clocksource hpet
[    0.129711] VFS: Disk quotas dquot_6.6.0
[    0.129745] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.129938] AppArmor: AppArmor Filesystem Enabled
[    0.129989] pnp: PnP ACPI init
[    0.130195] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.130208] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.130379] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.130384] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.130388] system 00:01: [io  0xffff] has been reserved
[    0.130392] system 00:01: [io  0xffff] has been reserved
[    0.130396] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.130400] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.130404] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.130408] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.130418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130473] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.130585] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.130595] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.130860] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.130865] system 00:04: [io  0x0a10-0x0a1f] has been reserved
[    0.130874] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130976] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.131275] pnp 00:06: [dma 0 disabled]
[    0.131392] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.131507] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.131516] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.132044] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.132048] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.132053] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.132057] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.132061] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.132066] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.132070] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.132074] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.132078] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.132083] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.132087] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.132097] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.132467] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[    0.132472] system 00:09: [mem 0x40000000-0x401fffff] has been reserved
[    0.132481] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.132524] pnp: PnP ACPI: found 10 devices
[    0.132528] PnPBIOS: Disabled by ACPI PNP
[    0.170782] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.170818] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.170837] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.170842] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.170850] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.170864] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.170867] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.170871] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.170875] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.170878] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.170882] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.170885] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.170889] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.170892] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.170896] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[    0.170899] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.170903] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.171112] NET: Registered protocol family 2
[    0.171381] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.171402] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.171430] TCP: Hash tables configured (established 8192 bind 8192)
[    0.171468] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.171476] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.171541] NET: Registered protocol family 1
[    0.171567] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.172425] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.172516] Unpacking initramfs...
[    2.182497] Freeing initrd memory: 53468K
[    2.182868] Scanning for low memory corruption every 60 seconds
[    2.184236] Initialise system trusted keyrings
[    2.184253] Key type blacklist registered
[    2.184307] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    2.187138] zbud: loaded
[    2.187761] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.188096] fuse init (API version 7.26)
[    2.190650] Key type asymmetric registered
[    2.190652] Asymmetric key parser 'x509' registered
[    2.190676] bounce: pool size: 64 pages
[    2.190702] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.190758] io scheduler noop registered
[    2.190760] io scheduler deadline registered
[    2.190870] io scheduler cfq registered (default)
[    2.191798] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    2.191800] vesafb: scrolling: redraw
[    2.191804] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.191837] vesafb: framebuffer at 0xe0000000, mapped to 0x(ptrval), using 5120k, total 5120k
[    2.192054] Console: switching to colour frame buffer device 160x64
[    2.192129] fb0: VESA VGA frame buffer device
[    2.192165] intel_idle: MWAIT substates: 0x21120
[    2.192167] intel_idle: v0.4.1 model 0x2A
[    2.192333] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.192514] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.192555] ACPI: Power Button [PWRB]
[    2.192641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.192673] ACPI: Power Button [PWRF]
[    2.194073] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.194391] thermal LNXTHERM:00: registered as thermal_zone0
[    2.194394] ACPI: Thermal Zone [TZ00] (28 C)
[    2.194927] thermal LNXTHERM:01: registered as thermal_zone1
[    2.194930] ACPI: Thermal Zone [TZ01] (30 C)
[    2.195101] isapnp: Scanning for PnP cards...
[    2.200075] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.220756] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.224769] Linux agpgart interface v0.103
[    2.246490] loop: module loaded
[    2.246874] libphy: Fixed MDIO Bus: probed
[    2.246876] tun: Universal TUN/TAP device driver, 1.6
[    2.246936] PPP generic driver version 2.4.2
[    2.247009] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.247013] ehci-pci: EHCI PCI platform driver
[    2.247295] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.247308] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.247326] ehci-pci 0000:00:1a.0: debug port 2
[    2.251253] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.251290] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d08000
[    2.264057] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.264172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.264176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.264180] usb usb1: Product: EHCI Host Controller
[    2.264183] usb usb1: Manufacturer: Linux 4.15.0-36-generic ehci_hcd
[    2.264186] usb usb1: SerialNumber: 0000:00:1a.0
[    2.264421] hub 1-0:1.0: USB hub found
[    2.264435] hub 1-0:1.0: 2 ports detected
[    2.264977] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.264988] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.265005] ehci-pci 0000:00:1d.0: debug port 2
[    2.268921] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.268948] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d07000
[    2.284046] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.284144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.284148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.284152] usb usb2: Product: EHCI Host Controller
[    2.284155] usb usb2: Manufacturer: Linux 4.15.0-36-generic ehci_hcd
[    2.284158] usb usb2: SerialNumber: 0000:00:1d.0
[    2.284377] hub 2-0:1.0: USB hub found
[    2.284390] hub 2-0:1.0: 2 ports detected
[    2.284694] ehci-platform: EHCI generic platform driver
[    2.284716] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.284722] ohci-pci: OHCI PCI platform driver
[    2.284739] ohci-platform: OHCI generic platform driver
[    2.284752] uhci_hcd: USB Universal Host Controller Interface driver
[    2.284871] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.284873] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.285630] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.285802] mousedev: PS/2 mouse device common for all mice
[    2.286006] rtc_cmos 00:02: RTC can wake from S4
[    2.286174] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.286209] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.286225] i2c /dev entries driver
[    2.286236] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    2.286407] device-mapper: uevent: version 1.0.3
[    2.286527] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    2.286567] platform eisa.0: Probing EISA bus 0
[    2.286571] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.286575] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.286578] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.286582] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.286585] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.286588] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.286591] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.286595] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.286598] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.286601] platform eisa.0: EISA: Detected 0 cards
[    2.286608] cpufreq_nforce2: No nForce2 chipset
[    2.286614] intel_pstate: Intel P-state driver initializing
[    2.287717] ledtrig-cpu: registered to indicate activity on CPUs
[    2.288256] NET: Registered protocol family 10
[    2.297363] Segment Routing with IPv6
[    2.297413] NET: Registered protocol family 17
[    2.297499] Key type dns_resolver registered
[    2.316485] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    2.332369] microcode: sig=0x206a7, pf=0x10, revision=0x2e
[    2.332442] microcode: Microcode Update Driver: v2.2.
[    2.332451] Using IPI No-Shortcut mode
[    2.332463] sched_clock: Marking stable (2332052533, 0)->(2314934001, 17118532)
[    2.332741] registered taskstats version 1
[    2.332755] Loading compiled-in X.509 certificates
[    2.347328] Loaded X.509 cert 'Build time autogenerated kernel key: 70a64b2b926dad91e7c2a53fd7b26b5e4b1027dd'
[    2.347366] zswap: loaded using pool lzo/zbud
[    2.355537] Key type big_key registered
[    2.355544] Key type trusted registered
[    2.359506] Key type encrypted registered
[    2.359511] AppArmor: AppArmor sha1 policy hashing enabled
[    2.359516] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.359529] ima: Allocated hash algorithm: sha1
[    2.359563] evm: HMAC attrs: 0x1
[    2.359941]   Magic number: 6:990:636
[    2.360092] rtc_cmos 00:02: setting system clock to 2018-10-12 14:36:12 UTC (1539354972)
[    2.360218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.360220] EDD information not available.
[    2.504940] isapnp: No Plug & Play device found
[    2.507513] Freeing unused kernel memory: 1092K
[    2.528285] Write protecting the kernel text: 8832k
[    2.528392] Write protecting the kernel read-only data: 3480k
[    2.528394] NX-protecting the kernel data: 7552k
[    2.528761] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.600041] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.620037] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.767327] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.767333] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.767636] hub 1-1:1.0: USB hub found
[    2.767694] hub 1-1:1.0: 4 ports detected
[    2.785394] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.785400] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.786033] hub 2-1:1.0: USB hub found
[    2.786472] hub 2-1:1.0: 4 ports detected
[    2.807104] ahci 0000:00:1f.2: version 3.0
[    2.814020] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.814033] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.814834] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x(ptrval), 44:8a:5b:5f:5d:ef, XID 0c900800 IRQ 25
[    2.814838] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.832677] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x5 impl SATA mode
[    2.832685] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    2.852318] scsi host0: ahci
[    2.860191] scsi host1: ahci
[    2.867458] scsi host2: ahci
[    2.877718] scsi host3: ahci
[    2.877838] ata1: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06100 irq 24
[    2.877841] ata2: DUMMY
[    2.877844] ata3: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06200 irq 24
[    2.877846] ata4: DUMMY
[    2.981703] [drm] Memory usable by graphics device = 2048M
[    2.981709] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[    2.981711] fb: switching to inteldrmfb from VESA VGA
[    2.981748] Console: switching to colour dummy device 80x25
[    2.981910] [drm] Replacing VGA console driver
[    2.987493] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.987496] [drm] Driver supports precise vblank timestamp query.
[    2.990979] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.999637] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    3.000976] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.001368] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    3.056100] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[    3.065877] fbcon: inteldrmfb (fb0) is primary device
[    3.065992] Console: switching to colour frame buffer device 160x64
[    3.066071] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.167145] usb 1-1.2: New USB device found, idVendor=1d57, idProduct=fa20
[    3.167152] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.167156] usb 1-1.2: Product: 2.4G Receiver
[    3.167160] usb 1-1.2: Manufacturer: Compx
[    3.183180] hidraw: raw HID events driver (C) Jiri Kosina
[    3.191399] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.192696] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    3.192713] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170831/psparse-550)
[    3.197050] tsc: Refined TSC clocksource calibration: 1097.506 MHz
[    3.197062] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfd1e55c821, max_idle_ns: 440795210298 ns
[    3.197087] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.198385] ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NSD0, LH00, max UDMA/133
[    3.200081] ata3.00: configured for UDMA/133
[    3.201851] usbcore: registered new interface driver usbhid
[    3.201853] usbhid: USB HID core driver
[    3.219262] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1D57:FA20.0001/input/input4
[    3.220182] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[    3.220186] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.234888] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    3.234908] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170831/psparse-550)
[    3.262508] ata1.00: configured for UDMA/133
[    3.262941] scsi 0:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
[    3.263662] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    3.263687] sd 0:0:0:0: [sda] Write Protect is off
[    3.263691] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.263731] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.263889] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.265209] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSD0  LH00 PQ: 0 ANSI: 5
[    3.276475] hid-generic 0003:1D57:FA20.0001: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input0
[    3.276771] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:1D57:FA20.0002/input/input5
[    3.277002] hid-generic 0003:1D57:FA20.0002: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input1
[    3.277402] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:1D57:FA20.0003/input/input6
[    3.286130]  sda: sda1 sda2 < sda5 >
[    3.287121] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.306791] sr 2:0:0:0: [sr0] scsi3-mmc drive: 10x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.306795] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.307114] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.307241] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    3.336259] hid-generic 0003:1D57:FA20.0003: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.2/input2
[    3.601123] random: fast init done
[    3.602427] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.618931] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.619049] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.220383] clocksource: Switched to clocksource tsc
[   12.527126] random: crng init done
[   12.527132] random: 7 urandom warning(s) missed due to ratelimiting
[   13.419950] NET: Registered protocol family 38
[   31.124716] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   33.519516] ip_tables: (C) 2000-2006 Netfilter Core Team
[   33.658310] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   33.676270] systemd[1]: Detected architecture x86.
[   33.704443] systemd[1]: Set hostname to <el-MS-7836>.
[   36.836741] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   36.836929] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   36.837331] systemd[1]: Created slice System Slice.
[   36.837499] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   36.837656] systemd[1]: Listening on LVM2 poll daemon socket.
[   36.837802] systemd[1]: Listening on Journal Socket (/dev/log).
[   36.837919] systemd[1]: Listening on Syslog Socket.
[   37.719147] lp: driver loaded but no devices found
[   37.795251] ppdev: user-space parallel port driver
[   38.180470] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   38.450839] systemd-journald[351]: Received request to flush runtime journal from PID 1
[   39.289750] systemd-journald[351]: File /var/log/journal/28d563ce872f8479b18ff174569bda0b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   40.140468] usb 1-1.2: USB disconnect, device number 3
[   42.328013] usb 1-1.1: new full-speed USB device number 4 using ehci-pci
[   42.438831] usb 1-1.1: New USB device found, idVendor=1d57, idProduct=fa20
[   42.438838] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   42.438843] usb 1-1.1: Product: 2.4G Receiver
[   42.438847] usb 1-1.1: Manufacturer: Compx
[   42.440658] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1D57:FA20.0004/input/input7
[   42.500253] hid-generic 0003:1D57:FA20.0004: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.1/input0
[   42.502091] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1D57:FA20.0005/input/input8
[   42.502272] hid-generic 0003:1D57:FA20.0005: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.1/input1
[   42.503876] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:1D57:FA20.0006/input/input9
[   42.560442] hid-generic 0003:1D57:FA20.0006: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:1a.0-1.1/input2
[   53.895324] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   53.936359] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   53.936373] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   53.936377] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   53.936385] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   53.936387] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   53.936394] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   53.936396] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   53.936403] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   53.936405] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   54.420486] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   54.539081] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   54.539084] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   54.539086] RAPL PMU: hw unit of domain package 2^-16 Joules
[   54.539088] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   54.570344] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   54.570350] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   54.570354] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   54.570357] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   54.570360] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   54.570365] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   54.570368] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   54.570372] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   54.593516] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   54.593642] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   54.593749] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   54.593857] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   54.593965] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   55.298723] intel_rapl: Found RAPL domain package
[   55.298727] intel_rapl: Found RAPL domain core
[   55.298729] intel_rapl: Found RAPL domain uncore
[   55.298738] intel_rapl: RAPL package 0 domain package locked by BIOS
[   56.224516] sr 2:0:0:0: [sr0] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   56.224523] sr 2:0:0:0: [sr0] tag#4 Sense Key : Illegal Request [current] 
[   56.224528] sr 2:0:0:0: [sr0] tag#4 Add. Sense: Invalid field in parameter list
[   56.224542] sr 2:0:0:0: [sr0] tag#4 CDB: Read(10) 28 00 00 00 11 5c 00 00 02 00
[   56.224546] print_req_error: I/O error, dev sr0, sector 17776
[   56.968491] sr 2:0:0:0: [sr0] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   56.968499] sr 2:0:0:0: [sr0] tag#6 Sense Key : Illegal Request [current] 
[   56.968504] sr 2:0:0:0: [sr0] tag#6 Add. Sense: Invalid field in parameter list
[   56.968510] sr 2:0:0:0: [sr0] tag#6 CDB: Read(10) 28 00 00 00 11 5d 00 00 01 00
[   56.968514] print_req_error: I/O error, dev sr0, sector 17780
[   56.968522] Buffer I/O error on dev sr0, logical block 4445, async page read
[   58.877625] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   58.917422] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   59.526556] audit: type=1400 audit(1539355029.660:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=675 comm="apparmor_parser"
[   59.526564] audit: type=1400 audit(1539355029.660:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=675 comm="apparmor_parser"
[   59.526569] audit: type=1400 audit(1539355029.660:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=675 comm="apparmor_parser"
[   59.526573] audit: type=1400 audit(1539355029.660:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=675 comm="apparmor_parser"
[   59.532651] audit: type=1400 audit(1539355029.668:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=674 comm="apparmor_parser"
[   59.532658] audit: type=1400 audit(1539355029.668:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=674 comm="apparmor_parser"
[   59.567533] audit: type=1400 audit(1539355029.700:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=678 comm="apparmor_parser"
[   59.567541] audit: type=1400 audit(1539355029.700:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=678 comm="apparmor_parser"
[   59.567546] audit: type=1400 audit(1539355029.700:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=678 comm="apparmor_parser"
[   59.617329] audit: type=1400 audit(1539355029.752:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=679 comm="apparmor_parser"
[   68.638712] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

Dernière modification par Coco76 (Le 12/10/2018, à 16:57)

Hors ligne

#15 Le 12/10/2018, à 16:54

Coco76

Re : wifi non dectecter apres imigration 18.04

1539359538.png1539359666.png

Dernière modification par Coco76 (Le 12/10/2018, à 16:56)

Hors ligne

#16 Le 12/10/2018, à 17:00

Coco76

Re : wifi non dectecter apres imigration 18.04

xubu1957 a écrit :

Regarde > la méthode de moko138 pour poster une image.

(edit= messages regroupés)

_ _ _

Tu as vu le message #11 d'inbox ?

oui merci , jai peutre pas compris une chose ?? je suis pas caller en informatique

Dernière modification par Coco76 (Le 12/10/2018, à 17:01)

Hors ligne

#17 Le 12/10/2018, à 17:05

Coco76

Re : wifi non dectecter apres imigration 18.04

wificheck

jai changer de port USB :

el@el-MS-7836:~$ wget -N -t 5 -T 10 https://framagit.org/cracolinux/wificheck/raw/master/wificheck && chmod +x wificheck && ./wificheck
--2018-10-12 18:03:54--  https://framagit.org/cracolinux/wificheck/raw/master/wificheck
Résolution de framagit.org (framagit.org)… 2a01:4f8:200:1302::42, 144.76.206.42
Connexion à framagit.org (framagit.org)|2a01:4f8:200:1302::42|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 2012 (2,0K) [text/plain]
Enregistre : «wificheck»

wificheck           100%[===================>]   1,96K  --.-KB/s    ds 0s      

En-tête de dernière modification manquant — horodatage arrêté.
2018-10-12 18:03:55 (84,5 MB/s) - «wificheck» enregistré [2012/2012]

[sudo] Mot de passe de el : 
lo        no wireless extensions.

eth0      no wireless extensions.

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

./wificheck: ligne 74: nm-tool : commande introuvable
Erreur : paramètre « status » non reconnu. Essayez plutôt --help.
Le fichier wificheck.log a été crée dans /home/el
Vous n'avez plus qu'à copier/coller son contenu sur le forum
 accès →→ file://home/el/wificheck.log
el@el-MS-7836:~$ 

Hors ligne

#18 Le 12/10/2018, à 17:07

inbox

Re : wifi non dectecter apres imigration 18.04

À tout hasard, as-tu un double boot avec Windows ? Si oui, il faut arrêter complétement Windows et non pas utiliser le pseudo arrêt (en réalité une hibernation) par défaut car le système réserve les périphériques.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Linux user 449594

En ligne

#19 Le 12/10/2018, à 17:10

Coco76

Re : wifi non dectecter apres imigration 18.04

inbox a écrit :

À tout hasard, as-tu un double boot avec Windows ? Si oui, il faut arrêter complétement Windows et non pas utiliser le pseudo arrêt (en réalité une hibernation) par défaut car le système réserve les périphériques.

DEPUIS 2014 que jai acheter ma Tour linux la seule chose que je c'est jai utiliser le CD ubuntu 14.04 est depuis je fait simplement des mise a jours . non je pence pas avoir installer wiindows

Hors ligne

#20 Le 12/10/2018, à 17:20

inbox

Re : wifi non dectecter apres imigration 18.04

Peux-tu, pour tester, un démarrage en live CD/USB (sans installation) avec une 18.04 et sans brancher ton câble ethernet ?


Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Linux user 449594

En ligne

#21 Le 12/10/2018, à 17:24

Coco76

Re : wifi non dectecter apres imigration 18.04

inbox a écrit :

Peux-tu, pour tester, un démarrage en live CD/USB (sans installation) avec une 18.04 et sans brancher ton câble ethernet ?

je suis debutant je connais rien meme la documentation maide pas vraiment

en live CD/USB jinstalle un CD vierge ??

Hors ligne

#22 Le 12/10/2018, à 17:29

Coco76

Re : wifi non dectecter apres imigration 18.04

mais par contre depuis que je suis passer en 18.04 est que ma clèè wifi ne ce dectecte plus jai ce message a chaque demarrage , que je ne pas mettre a jour .

Échec du téléchargement des données supplémentaires

Les paquet suivants nécessitent le téléchargement de données supplémentaires après leur installation, mais les données n'ont pas pu être téléchargées ou traitées.

ttf-mscorefonts-installer

Une nouvelle tentative de téléchargement sera effectuée ultérieurement, néanmoins vous pouvez retenter le téléchargement dès à présent. Pour exécuter cette action, il est nécessaire d'avoir une connexion à Internet fonctionnelle.

Dernière modification par Coco76 (Le 12/10/2018, à 17:30)

Hors ligne

#23 Le 12/10/2018, à 17:36

xubu1957

Re : wifi non dectecter apres imigration 18.04

Il faut valider la licence avec la touche tabulation !

fin du § 5 a écrit :

Utiliser la touche tabulation pour atteindre le OK de validation de la licence.

Dans la Doc > msttcorefonts#installation_paquet_ok_mais_polices_non_accessible


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#24 Le 12/10/2018, à 17:39

inbox

Re : wifi non dectecter apres imigration 18.04

Effectivement, avant de tester une session live, il faut vérifier que ton système est bien à jour.

Lance ces commandes avec ton câble branché :

sudo apt clean
sudo apt update
sudo apt dist-upgrade

Lorsque tu auras une fenêtre te parlant de "ttf-mscorefonts-installer", il faudra placer ton curseur sur "Ok" avec la touche de tabulation et valider.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Linux user 449594

En ligne

#25 Le 12/10/2018, à 17:43

Coco76

Re : wifi non dectecter apres imigration 18.04

xubu1957 a écrit :

Il faut valider la licence avec la touche tabulation !

fin du § 5 a écrit :

Utiliser la touche tabulation pour atteindre le OK de validation de la licence.

Dans la Doc > msttcorefonts#installation_paquet_ok_mais_polices_non_accessible

el@el-MS-7836:~$ sudo apt install ~/Téléchargements/ttf-mscorefonts-installer_3.7_all.deb
[sudo] Mot de passe de el : 
Lecture des listes de paquets... Fait
E: Le fichier donné /home/el/Téléchargements/ttf-mscorefonts-installer_3.7_all.deb n'est pas compris sur la ligne de commande
el@el-MS-7836:~$ wget http://ftp.de.debian.org/debian/pool/contrib/m/msttcorefonts/ttf-mscorefonts-installer_3.7_all.deb -P ~/Téléchargements
--2018-10-12 18:41:55--  http://ftp.de.debian.org/debian/pool/contrib/m/msttcorefonts/ttf-mscorefonts-installer_3.7_all.deb
Résolution de ftp.de.debian.org (ftp.de.debian.org)… 141.76.2.4
Connexion à ftp.de.debian.org (ftp.de.debian.org)|141.76.2.4|:80… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 31300 (31K) [application/x-debian-package]
Enregistre : «/home/el/Téléchargements/ttf-mscorefonts-installer_3.7_all.deb»

ttf-mscorefonts-ins 100%[===================>]  30,57K  --.-KB/s    ds 0,06s   

2018-10-12 18:41:55 (555 KB/s) - «/home/el/Téléchargements/ttf-mscorefonts-installer_3.7_all.deb» enregistré [31300/31300]

el@el-MS-7836:~$ sudo apt install ~/Téléchargements/ttf-mscorefonts-installer_3.7_all.deb
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Note : sélection de « ttf-mscorefonts-installer » au lieu de « /home/el/Téléchargements/ttf-mscorefonts-installer_3.7_all.deb »
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-image-3.13.0-86-generic linux-image-extra-3.13.0-86-generic
  qml-module-qtgraphicaleffects qml-module-qtquick-dialogs
  qml-module-qtquick-privatewidgets qml-module-qtwebkit
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets suivants seront mis à jour :
  ttf-mscorefonts-installer
1 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 0 o/31,3 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Réception de:1 /home/el/Téléchargements/ttf-mscorefonts-installer_3.7_all.deb ttf-mscorefonts-installer all 3.7 [31,3 kB]
Préconfiguration des paquets...
(Lecture de la base de données... 186367 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../ttf-mscorefonts-installer_3.7_all.deb ...
Dépaquetage de ttf-mscorefonts-installer (3.7) sur (3.6ubuntu2) ...
Traitement des actions différées (« triggers ») pour update-notifier-common (3.192.1.3) ...
Paramétrage de ttf-mscorefonts-installer (3.7) ...
All fonts downloaded and installed.
Traitement des actions différées (« triggers ») pour fontconfig (2.12.6-0ubuntu2) ...
N: Le téléchargement est effectué en dehors du bac à sable en tant que « root » car le fichier « /home/el/Téléchargements/ttf-mscorefonts-installer_3.7_all.deb » n'est pas accessible par l'utilisateur « _apt ». - pkgAcquire::Run (13: Permission non accordée)
el@el-MS-7836:~$ 

Hors ligne