#26 Le 18/01/2019, à 00:02
- merrybenji
Re : La fonction F12 ne fonctionne pas
voici le rapport :
test@test-HP-Laptop-17-by0xxx:~$ sudo modprobe -r rtl8821ce
[sudo] Mot de passe de test :
modprobe: FATAL: Module rtl8821ce not found.
test@test-HP-Laptop-17-by0xxx:~$ sudo modprobe -a rtl8821ce
modprobe: WARNING: Module rtl8821ce not found in directory /lib/modules/4.18.0-13-generic
test@test-HP-Laptop-17-by0xxx:~$
Hors ligne
#27 Le 18/01/2019, à 00:03
- xubu1957
Re : La fonction F12 ne fonctionne pas
Je n'ai plus d'idées !
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#28 Le 18/01/2019, à 00:09
- merrybenji
Re : La fonction F12 ne fonctionne pas
ah mais comment ça fait que la commande ne veux pas marché c'est térible surtout que la 1er fois que j'ai fais l'installation sa à marché (après j'ai fais tellement de teste que je ne sais plus)
Hors ligne
#29 Le 18/01/2019, à 00:11
- xubu1957
Re : La fonction F12 ne fonctionne pas
Tu avais trifouillé dans le BIOS pour désactiver le secure-boot ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#30 Le 18/01/2019, à 00:13
- merrybenji
Re : La fonction F12 ne fonctionne pas
Un peu oui mais le secure-boot et bien désactivé vous voulez des photo ?
Hors ligne
#31 Le 18/01/2019, à 00:14
- xubu1957
Re : La fonction F12 ne fonctionne pas
Je ne suis pas compétent en matière de BIOS !
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#32 Le 18/01/2019, à 11:03
- merrybenji
Re : La fonction F12 ne fonctionne pas
Bonjour,
Je pense peut-être avoir trouvé voici le code :
GNU nano 2.9.8 /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi="
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Par contre je ne sais pas comment faire pour l'enregistré quelqu'un peu m'aider s'il vous plaît ?
Hors ligne
#33 Le 18/01/2019, à 11:58
- inbox
Re : La fonction F12 ne fonctionne pas
Salut,
Sais-tu pour quelle raison, tu as ajouté l'option acpi_osi= aux paramètres de Grub ? D'autant plus qu'elle me semble incomplète, vu que ça se termine par un "=".
A+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#34 Le 18/01/2019, à 12:47
- merrybenji
Re : La fonction F12 ne fonctionne pas
Bonjour,
J'essaye ça car je suis tomber une un sujet qui concerne un peu mon souci voici le lien : https://www.skyminds.net/linux-retrouve … -portable/
dans l'attente de votre retour
Hors ligne
#35 Le 18/01/2019, à 13:11
- inbox
Re : La fonction F12 ne fonctionne pas
C'est à dire que tu n'arrives pas à régler la luminosité du clavier sans cette option ?
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#36 Le 18/01/2019, à 13:25
- merrybenji
Re : La fonction F12 ne fonctionne pas
Non, c'est pour voir si éventuellement je peux activer et désactiver le mode avant avec cet commande. Tout mes commande F1 ET F11 fonctionne sauf la F12 pour le mode avions
J'ai réussie à modifier et l'enregistré mais cela ne fonctionne toujours pas
On peux pas faire un raccourcie pour désactiver et réactiver le wifi dans les commande de clavier ou la paramétré ?
Dernière modification par merrybenji (Le 18/01/2019, à 13:26)
Hors ligne
#37 Le 18/01/2019, à 14:06
- merrybenji
Re : La fonction F12 ne fonctionne pas
J'ai trouvé ça aussi : https://forums.fedora-fr.org/viewtopic.php?id=57499
Sa pourrai pas venir d'un problème de version de noyaux ?
Hors ligne
#38 Le 18/01/2019, à 14:17
- xubu1957
Re : La fonction F12 ne fonctionne pas
Bonjour,
Montre :
lsmod
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#39 Le 18/01/2019, à 14:43
- merrybenji
Re : La fonction F12 ne fonctionne pas
Voici rapport :
test@test-HP-Laptop-17-by0xxx:~$ lsmod
Module Size Used by
rfcomm 77824 4
cmac 16384 1
bnep 20480 2
nls_iso8859_1 16384 1
snd_hda_codec_hdmi 49152 1
snd_soc_skl 102400 0
snd_soc_skl_ipc 61440 1 snd_soc_skl
snd_soc_sst_ipc 16384 1 snd_soc_skl_ipc
snd_soc_sst_dsp 32768 1 snd_soc_skl_ipc
snd_hda_ext_core 24576 1 snd_soc_skl
amdgpu 2945024 0
snd_hda_codec_realtek 106496 1
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_soc_acpi 16384 1 snd_soc_skl
intel_rapl 20480 0
hp_wmi 16384 0
x86_pkg_temp_thermal 16384 0
chash 16384 1 amdgpu
snd_soc_core 229376 1 snd_soc_skl
wmi_bmof 16384 0
intel_powerclamp 16384 0
sparse_keymap 16384 1 hp_wmi
gpu_sched 24576 1 amdgpu
snd_compress 20480 1 snd_soc_core
coretemp 16384 0
ac97_bus 16384 1 snd_soc_core
intel_wmi_thunderbolt 16384 0
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_hda_intel 40960 3
snd_hda_codec 126976 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
kvm 622592 0
irqbypass 16384 1 kvm
snd_hda_core 81920 7 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_hda_codec_realtek,snd_soc_skl
crct10dif_pclmul 16384 0
snd_hwdep 20480 1 snd_hda_codec
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
pcbc 16384 0
snd_pcm 98304 8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_core,snd_soc_skl,snd_hda_core,snd_pcm_dmaengine
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
aesni_intel 200704 2
snd_rawmidi 32768 1 snd_seq_midi
aes_x86_64 20480 1 aesni_intel
crypto_simd 16384 1 aesni_intel
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
radeon 1462272 1
glue_helper 16384 1 aesni_intel
snd_seq 65536 2 snd_seq_midi,snd_seq_midi_event
snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi
8821ce 2088960 0
uvcvideo 98304 0
snd_timer 32768 2 snd_seq,snd_pcm
intel_cstate 20480 0
intel_rapl_perf 16384 0
i915 1740800 10
snd 81920 19 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi
joydev 20480 0
videobuf2_vmalloc 16384 1 uvcvideo
ttm 106496 2 amdgpu,radeon
videobuf2_memops 16384 1 videobuf2_vmalloc
drm_kms_helper 172032 3 amdgpu,radeon,i915
videobuf2_v4l2 24576 1 uvcvideo
btusb 45056 0
input_leds 16384 0
btrtl 16384 1 btusb
cfg80211 663552 1 8821ce
videobuf2_common 45056 2 videobuf2_v4l2,uvcvideo
btbcm 16384 1 btusb
serio_raw 16384 0
btintel 20480 1 btusb
soundcore 16384 1 snd
videodev 188416 3 videobuf2_v4l2,uvcvideo,videobuf2_common
drm 458752 10 gpu_sched,drm_kms_helper,amdgpu,radeon,i915,ttm
bluetooth 548864 31 btrtl,btintel,btbcm,bnep,btusb,rfcomm
media 40960 2 videodev,uvcvideo
i2c_algo_bit 16384 3 amdgpu,radeon,i915
mei_me 40960 0
fb_sys_fops 16384 1 drm_kms_helper
syscopyarea 16384 1 drm_kms_helper
ecdh_generic 24576 2 bluetooth
intel_pch_thermal 16384 0
sysfillrect 16384 1 drm_kms_helper
mei 98304 1 mei_me
sysimgblt 16384 1 drm_kms_helper
processor_thermal_device 16384 0
intel_soc_dts_iosf 16384 1 processor_thermal_device
wmi 24576 3 hp_wmi,intel_wmi_thunderbolt,wmi_bmof
int3403_thermal 16384 0
int340x_thermal_zone 16384 2 int3403_thermal,processor_thermal_device
video 45056 1 i915
acpi_pad 180224 0
mac_hid 16384 0
hp_wireless 16384 0
int3400_thermal 16384 0
acpi_thermal_rel 16384 1 int3400_thermal
sch_fq_codel 20480 6
parport_pc 36864 0
ppdev 20480 0
lp 20480 0
parport 49152 3 parport_pc,lp,ppdev
ip_tables 24576 0
x_tables 40960 1 ip_tables
autofs4 40960 2
r8169 86016 0
ahci 40960 4
psmouse 151552 0
i2c_i801 28672 0
mii 16384 1 r8169
libahci 32768 1 ahci
i2c_hid 20480 0
hid 126976 1 i2c_hid
test@test-HP-Laptop-17-by0xxx:~$
Hors ligne
#40 Le 18/01/2019, à 14:58
- inbox
Re : La fonction F12 ne fonctionne pas
Donc l'option acpi_osi= ne sert à rien dans ton cas. Cela pourrait même avoir des effets de bord. Il faut donc l'enlever.
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#41 Le 18/01/2019, à 15:01
- merrybenji
Re : La fonction F12 ne fonctionne pas
vioci le nouveau rapport :
test@test-HP-Laptop-17-by0xxx:~$ lsmod
Module Size Used by
uas 24576 0
usb_storage 69632 3 uas
rfcomm 77824 4
cmac 16384 1
bnep 20480 2
nls_iso8859_1 16384 1
snd_hda_codec_hdmi 49152 1
snd_soc_skl 102400 0
snd_soc_skl_ipc 61440 1 snd_soc_skl
snd_soc_sst_ipc 16384 1 snd_soc_skl_ipc
snd_soc_sst_dsp 32768 1 snd_soc_skl_ipc
snd_hda_ext_core 24576 1 snd_soc_skl
amdgpu 2945024 0
snd_hda_codec_realtek 106496 1
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_soc_acpi 16384 1 snd_soc_skl
intel_rapl 20480 0
hp_wmi 16384 0
x86_pkg_temp_thermal 16384 0
chash 16384 1 amdgpu
snd_soc_core 229376 1 snd_soc_skl
wmi_bmof 16384 0
intel_powerclamp 16384 0
sparse_keymap 16384 1 hp_wmi
gpu_sched 24576 1 amdgpu
snd_compress 20480 1 snd_soc_core
coretemp 16384 0
ac97_bus 16384 1 snd_soc_core
intel_wmi_thunderbolt 16384 0
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_hda_intel 40960 3
snd_hda_codec 126976 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
kvm 622592 0
irqbypass 16384 1 kvm
snd_hda_core 81920 7 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_hda_codec_realtek,snd_soc_skl
crct10dif_pclmul 16384 0
snd_hwdep 20480 1 snd_hda_codec
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
pcbc 16384 0
snd_pcm 98304 8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_core,snd_soc_skl,snd_hda_core,snd_pcm_dmaengine
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
aesni_intel 200704 2
snd_rawmidi 32768 1 snd_seq_midi
aes_x86_64 20480 1 aesni_intel
crypto_simd 16384 1 aesni_intel
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
radeon 1462272 1
glue_helper 16384 1 aesni_intel
snd_seq 65536 2 snd_seq_midi,snd_seq_midi_event
snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi
8821ce 2088960 0
uvcvideo 98304 0
snd_timer 32768 2 snd_seq,snd_pcm
intel_cstate 20480 0
intel_rapl_perf 16384 0
i915 1740800 11
snd 81920 19 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi
joydev 20480 0
videobuf2_vmalloc 16384 1 uvcvideo
ttm 106496 2 amdgpu,radeon
videobuf2_memops 16384 1 videobuf2_vmalloc
drm_kms_helper 172032 3 amdgpu,radeon,i915
videobuf2_v4l2 24576 1 uvcvideo
btusb 45056 0
input_leds 16384 0
btrtl 16384 1 btusb
cfg80211 663552 1 8821ce
videobuf2_common 45056 2 videobuf2_v4l2,uvcvideo
btbcm 16384 1 btusb
serio_raw 16384 0
btintel 20480 1 btusb
soundcore 16384 1 snd
videodev 188416 3 videobuf2_v4l2,uvcvideo,videobuf2_common
drm 458752 10 gpu_sched,drm_kms_helper,amdgpu,radeon,i915,ttm
bluetooth 548864 31 btrtl,btintel,btbcm,bnep,btusb,rfcomm
media 40960 2 videodev,uvcvideo
i2c_algo_bit 16384 3 amdgpu,radeon,i915
mei_me 40960 0
fb_sys_fops 16384 1 drm_kms_helper
syscopyarea 16384 1 drm_kms_helper
ecdh_generic 24576 2 bluetooth
intel_pch_thermal 16384 0
sysfillrect 16384 1 drm_kms_helper
mei 98304 1 mei_me
sysimgblt 16384 1 drm_kms_helper
processor_thermal_device 16384 0
intel_soc_dts_iosf 16384 1 processor_thermal_device
wmi 24576 3 hp_wmi,intel_wmi_thunderbolt,wmi_bmof
int3403_thermal 16384 0
int340x_thermal_zone 16384 2 int3403_thermal,processor_thermal_device
video 45056 1 i915
acpi_pad 180224 0
mac_hid 16384 0
hp_wireless 16384 0
int3400_thermal 16384 0
acpi_thermal_rel 16384 1 int3400_thermal
sch_fq_codel 20480 6
parport_pc 36864 0
ppdev 20480 0
lp 20480 0
parport 49152 3 parport_pc,lp,ppdev
ip_tables 24576 0
x_tables 40960 1 ip_tables
autofs4 40960 2
r8169 86016 0
ahci 40960 4
psmouse 151552 0
i2c_i801 28672 0
mii 16384 1 r8169
libahci 32768 1 ahci
i2c_hid 20480 0
hid 126976 1 i2c_hid
test@test-HP-Laptop-17-by0xxx:~$
Hors ligne
#42 Le 18/01/2019, à 18:44
- merrybenji
Re : La fonction F12 ne fonctionne pas
Je me demande si à tout harsar il y a pas un souci dans le fichier Makefile
Car je vois qu'il y a pleins d’option avec des yes et des no voir dans le code :
EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)
EXTRA_CFLAGS += -O1
#EXTRA_CFLAGS += -O3
#EXTRA_CFLAGS += -Wall
#EXTRA_CFLAGS += -Wextra
#EXTRA_CFLAGS += -Werror
#EXTRA_CFLAGS += -pedantic
#EXTRA_CFLAGS += -Wshadow -Wpointer-arith -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes
EXTRA_CFLAGS += -Wno-unused-variable
EXTRA_CFLAGS += -Wno-unused-value
EXTRA_CFLAGS += -Wno-unused-label
EXTRA_CFLAGS += -Wno-unused-parameter
EXTRA_CFLAGS += -Wno-unused-function
EXTRA_CFLAGS += -Wno-unused
#EXTRA_CFLAGS += -Wno-uninitialized
GCC_VER_49 := $(shell echo `$(CC) -dumpversion | cut -f1-2 -d.` \>= 4.9 | bc )
ifeq ($(GCC_VER_49),1)
EXTRA_CFLAGS += -Wno-date-time # Fix compile error && warning on gcc 4.9 and later
endif
EXTRA_CFLAGS += -I$(src)/include
EXTRA_CFLAGS += -I$(src)/hal/phydm
EXTRA_LDFLAGS += --strip-debug
CONFIG_AUTOCFG_CP = n
########################## WIFI IC ############################
CONFIG_MULTIDRV = n
CONFIG_RTL8188E = n
CONFIG_RTL8812A = n
CONFIG_RTL8821A = n
CONFIG_RTL8192E = n
CONFIG_RTL8723B = n
CONFIG_RTL8814A = n
CONFIG_RTL8723C = n
CONFIG_RTL8188F = n
CONFIG_RTL8822B = n
CONFIG_RTL8723D = n
CONFIG_RTL8821C = y
######################### Interface ###########################
CONFIG_USB_HCI = n
CONFIG_PCI_HCI = y
CONFIG_SDIO_HCI = n
CONFIG_GSPI_HCI = n
########################## Features ###########################
CONFIG_MP_INCLUDED = y
CONFIG_POWER_SAVING = y
CONFIG_USB_AUTOSUSPEND = n
CONFIG_HW_PWRP_DETECTION = n
CONFIG_WIFI_TEST = n
CONFIG_BT_COEXIST = y
CONFIG_INTEL_WIDI = n
CONFIG_WAPI_SUPPORT = n
CONFIG_EFUSE_CONFIG_FILE = y
CONFIG_EXT_CLK = n
CONFIG_TRAFFIC_PROTECT = y
CONFIG_LOAD_PHY_PARA_FROM_FILE = y
CONFIG_TXPWR_BY_RATE_EN = auto
CONFIG_TXPWR_LIMIT_EN = auto
CONFIG_RTW_ADAPTIVITY_EN = disable
CONFIG_RTW_ADAPTIVITY_MODE = normal
CONFIG_SIGNAL_SCALE_MAPPING = n
CONFIG_80211W = n
CONFIG_REDUCE_TX_CPU_LOADING = n
CONFIG_BR_EXT = y
CONFIG_TDLS = n
CONFIG_WIFI_MONITOR = n
CONFIG_MCC_MODE = n
CONFIG_APPEND_VENDOR_IE_ENABLE = n
CONFIG_RTW_NAPI = y
CONFIG_RTW_GRO = y
########################## Debug ###########################
CONFIG_RTW_DEBUG = y
# default log level is _DRV_INFO_ = 4,
# please refer to "How_to_set_driver_debug_log_level.doc" to set the available level.
CONFIG_RTW_LOG_LEVEL = 4
######################## Wake On Lan ##########################
CONFIG_WOWLAN = n
CONFIG_GPIO_WAKEUP = n
CONFIG_DEFAULT_PATTERNS_EN = n
CONFIG_WAKEUP_GPIO_IDX = default
CONFIG_HIGH_ACTIVE = n
CONFIG_PNO_SUPPORT = n
CONFIG_PNO_SET_DEBUG = n
CONFIG_AP_WOWLAN = n
######### Notify SDIO Host Keep Power During Syspend ##########
CONFIG_RTW_SDIO_PM_KEEP_POWER = y
###################### MP HW TX MODE FOR VHT #######################
CONFIG_MP_VHT_HW_TX_MODE = n
###################### Platform Related #######################
CONFIG_PLATFORM_I386_PC = y
CONFIG_PLATFORM_ANDROID_X86 = n
CONFIG_PLATFORM_ANDROID_INTEL_X86 = n
CONFIG_PLATFORM_JB_X86 = n
CONFIG_PLATFORM_ARM_S3C2K4 = n
CONFIG_PLATFORM_ARM_PXA2XX = n
CONFIG_PLATFORM_ARM_S3C6K4 = n
CONFIG_PLATFORM_MIPS_RMI = n
CONFIG_PLATFORM_RTD2880B = n
CONFIG_PLATFORM_MIPS_AR9132 = n
CONFIG_PLATFORM_RTK_DMP = n
CONFIG_PLATFORM_MIPS_PLM = n
CONFIG_PLATFORM_MSTAR389 = n
CONFIG_PLATFORM_MT53XX = n
CONFIG_PLATFORM_ARM_MX51_241H = n
CONFIG_PLATFORM_FS_MX61 = n
CONFIG_PLATFORM_ACTIONS_ATJ227X = n
CONFIG_PLATFORM_TEGRA3_CARDHU = n
CONFIG_PLATFORM_TEGRA4_DALMORE = n
CONFIG_PLATFORM_ARM_TCC8900 = n
CONFIG_PLATFORM_ARM_TCC8920 = n
CONFIG_PLATFORM_ARM_TCC8920_JB42 = n
CONFIG_PLATFORM_ARM_TCC8930_JB42 = n
CONFIG_PLATFORM_ARM_RK2818 = n
CONFIG_PLATFORM_ARM_RK3066 = n
CONFIG_PLATFORM_ARM_RK3188 = n
CONFIG_PLATFORM_ARM_URBETTER = n
CONFIG_PLATFORM_ARM_TI_PANDA = n
CONFIG_PLATFORM_MIPS_JZ4760 = n
CONFIG_PLATFORM_DMP_PHILIPS = n
CONFIG_PLATFORM_MSTAR_TITANIA12 = n
CONFIG_PLATFORM_MSTAR = n
CONFIG_PLATFORM_SZEBOOK = n
CONFIG_PLATFORM_ARM_SUNxI = n
CONFIG_PLATFORM_ARM_SUN6I = n
CONFIG_PLATFORM_ARM_SUN7I = n
CONFIG_PLATFORM_ARM_SUN8I_W3P1 = n
CONFIG_PLATFORM_ARM_SUN8I_W5P1 = n
CONFIG_PLATFORM_ACTIONS_ATM702X = n
CONFIG_PLATFORM_ACTIONS_ATV5201 = n
CONFIG_PLATFORM_ACTIONS_ATM705X = n
CONFIG_PLATFORM_ARM_SUN50IW1P1 = n
CONFIG_PLATFORM_ARM_RTD299X = n
CONFIG_PLATFORM_ARM_SPREADTRUM_6820 = n
CONFIG_PLATFORM_ARM_SPREADTRUM_8810 = n
CONFIG_PLATFORM_ARM_WMT = n
CONFIG_PLATFORM_TI_DM365 = n
CONFIG_PLATFORM_MOZART = n
CONFIG_PLATFORM_RTK119X = n
CONFIG_PLATFORM_RTK129X = n
CONFIG_PLATFORM_NOVATEK_NT72668 = n
CONFIG_PLATFORM_HISILICON = n
CONFIG_PLATFORM_NV_TK1 = n
CONFIG_PLATFORM_RTL8197D = n
###############################################################
CONFIG_DRVEXT_MODULE = n
export TopDIR ?= $(shell pwd)
########### COMMON #################################
ifeq ($(CONFIG_GSPI_HCI), y)
Hors ligne
#43 Le 18/01/2019, à 19:26
- merrybenji
Re : La fonction F12 ne fonctionne pas
J'ai une autre information, quand je fais c'est commande
"rfkill unblock all" ou "rfkill block all"
cela fonctionne il me met le mode avion ou il me le déactivé immédiatement.
On peux pas le créer ou faire une touche de raccourcie ?
Dernière modification par merrybenji (Le 18/01/2019, à 19:27)
Hors ligne