Pages : 1
#1 Le 16/05/2019, à 23:24
- kurihana30
Help -Grub rescue- pour dual boot
Bonjour à tous,
en voulant procéder à un dual boot, je crois avoir fait une fausse manipulation mais je ne sais pas laquelle.
Et après avoir installé un second disque dur interne formaté en NTFS simplement pour y mettre un jeu que seul Win reconnaîtra, et en voulant redémarrer mon PC pour voir si j'avais bien tout mis dessus, j'ai créé ensuite une clé USB bootable Win pour mon dual boot, mais mon grub aurait disparu.
Ce n'est pas un problème Win de base sinon je ne viendrais pas vous embêter avec ça, mais je ne sais que faire, j'ai consulté la page "comment réinstallé GRUB en utilsant la première méthode, sans succès; j'ai ensuite installé Boot repair et me voilà donc.
Je précise que je suis sur Linux mint depuis 2011, donc pas ubuntu même, et je suis encore sous une distribution d'il y a deux ans. Enfin je ne pense pas que ce soit problématique.
Et pour mon dual boot, je dois installer Win en premier et tout formater d'abord mais donc impossible pour le moment.
Si vous pouviez m'aider à comprendre le souci et éventuellement m'aider à trouver une solution, merci d'avance. grub rescue
Edit : j'ai consulté plusieurs sujets du même genre, donc je m'excuse pour les doublons, triplés etc... mais même en voulant installer une nouvelle distribution de la Mint, ou Ubuntu peu importe, je modifie dans le BIOS pour booter sur ma clé, ensuite au reboot je lance la sélection pour démarrer avec F8, il me propose bien ma clé usb, puis une fois cliqué dessus, il me sort quand même soit
/boot/grub/x86_64-efi/normal.mod’ not found
Entering rescue mode…
grub rescue>
soit il me remet le grub de base fond noir écriture blanche.
Dernière modification par kurihana30 (Le 17/05/2019, à 01:17)
Hors ligne
#2 Le 17/05/2019, à 06:56
- ikewdu
Re : Help -Grub rescue- pour dual boot
Salut,
Parviens-tu , à l'heure actuelle, à démarrer sur quelque chose ? As-tu tenté de débrancher le second DD ? Quelles sont les références du PC ?
Hors ligne
#3 Le 17/05/2019, à 17:02
- malbo
Re : Help -Grub rescue- pour dual boot
Bonjour,
Je colle ci-dessous le Boot-Info dont tu as donné le lien ( http://paste.ubuntu.com/p/4FPVXJhjFG/ ) dans le post #1 :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fat part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: Syslinux 4.03 or higher
Boot sector info: Syslinux looks at sector 9624788 of /dev/sdb1 for its
second stage. It is very unlikely that Syslinux is
(still) installed. The second stage could not be
found. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/syslinux/syslinux.cfg /EFI/BOOT/bootia32.efi
/EFI/BOOT/grubx64.efi /EFI/microsoft/boot/cdboot.efi
/EFI/microsoft/boot/cdboot_noprompt.efi
/EFI/microsoft/boot/memtest.efi /bootmgr /boot/bcd
/boot/syslinux/ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 39,999,487 39,997,440 83 Linux
/dev/sda2 39,999,488 42,000,383 2,000,896 82 Linux swap / Solaris
/dev/sda3 42,002,430 1,953,523,711 1,911,521,282 5 Extended
/dev/sda5 42,002,432 1,953,523,711 1,911,521,280 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 64 15,728,433 15,728,370 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 d7c80057-b094-4575-b2b2-682a9f6a6438 ext4
/dev/sda2 d981eb56-f054-4ff6-b28f-96cda5d29ac8 swap
/dev/sda5 ae12ab6c-0074-4491-a11d-815d6f5d44d4 ext4
/dev/sdb1 2BF3-D9B9 vfat MULTISYSTEM
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 May 16 23:09 ata-TSSTcorp_CDDVDW_SH_R41368DB157426 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 16 23:15 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598 -> ../../sda
lrwxrwxrwx 1 root root 10 May 16 23:09 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 16 23:09 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 16 23:09 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 16 23:09 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 May 16 23:15 usb-VendorCo_ProductCode_9207005716265638155-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 16 23:09 usb-VendorCo_ProductCode_9207005716265638155-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 May 16 23:15 wwn-0x50014ee25ad986e2 -> ../../sda
lrwxrwxrwx 1 root root 10 May 16 23:09 wwn-0x50014ee25ad986e2-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 16 23:09 wwn-0x50014ee25ad986e2-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 16 23:09 wwn-0x50014ee25ad986e2-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 16 23:09 wwn-0x50014ee25ad986e2-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sda5 /home ext4 (rw)
/dev/sdb1 /media/tacchon/MULTISYSTEM vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
linux /boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-37-generic
}
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
echo 'Loading Linux 3.13.0-37-generic ...'
linux /boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-37-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda5 during installation
UUID=ae12ab6c-0074-4491-a11d-815d6f5d44d4 /home ext4 defaults 0 2
# swap was on /dev/sda2 during installation
UUID=d981eb56-f054-4ff6-b28f-96cda5d29ac8 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
6.511474609 = 6.991642624 boot/grub/grub.cfg 1
6.512138367 = 6.992355328 boot/grub/i386-pc/core.img 1
16.945373535 = 18.194956288 boot/vmlinuz-3.13.0-37-generic 1
16.945373535 = 18.194956288 vmlinuz 1
3.199821472 = 3.435782144 boot/initrd.img-3.13.0-37-generic 1
3.199821472 = 3.435782144 initrd.img 1
======================= sdb1/boot/syslinux/syslinux.cfg: =======================
--------------------------------------------------------------------------------
#http://www.syslinux.org/wiki/index.php?title=SYSLINUX#UI_module_options...
#default /boot/syslinux/vesamenu.c32
UI /boot/syslinux/vesamenu.c32
prompt 0
timeout 40
ontimeout 0
MENU TITLE MultiSystem LiveUSB
MENU DEFAULT 0
MENU BACKGROUND /boot/splash/splash.png
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|28-04-2019-20:40:07-101431183|sources|multisystem-windows|5163Mio|
label win
MENU LABEL Windows install
KERNEL chain.c32 hd0 1 ntldr=/bootmgr
#MULTISYSTEM_MENU_FIN|28-04-2019-20:40:07-101431183|sources|multisystem-windows|5163Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
label 0
MENU LABEL PLoP Boot Manager
KERNEL /boot/img/plpbt
label 1
MENU LABEL Grub2
kernel /boot/syslinux/chain.c32 file=/boot/grub/boot.img
label 2
MENU LABEL Grub4Dos
kernel /boot/grub.exe
LABEL 3
MENU LABEL Hardware Detection Tool
KERNEL /boot/syslinux/hdt.c32
#Exemple pour booter un iso avec version recente de memdisk
#label 4
#MENU LABEL boot iso
#KERNEL /boot/syslinux/memdisk
#APPEND iso raw initrd=/g4u.iso
#LABEL 5
#KERNEL /boot/syslinux/memdisk
#APPEND initrd=freebsd.img floppy
#LABEL 6
#MENU LABEL Chainer win
#KERNEL /boot/syslinux/chain.c32 ntldr=/ntldr
#LABEL 7
#MENU LABEL Chainer partition 2
#kernel /boot/syslinux/chain.c32
#append hd0 2
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? boot/syslinux/syslinux.cfg 1
?? = ?? boot/syslinux/ldlinux.sys 1
?? = ?? boot/syslinux/chain.c32 1
?? = ?? boot/syslinux/hdt.c32 1
?? = ?? boot/syslinux/ifplop.c32 1
?? = ?? boot/syslinux/menu.c32 1
?? = ?? boot/syslinux/reboot.c32 1
?? = ?? boot/syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
boot/syslinux/chain.c32 : not a COM32/COM32R module
boot/syslinux/hdt.c32 : not a COM32/COM32R module
boot/syslinux/ifplop.c32 : not a COM32/COM32R module
boot/syslinux/menu.c32 : not a COM32/COM32R module
boot/syslinux/reboot.c32 : not a COM32/COM32R module
boot/syslinux/vesamenu.c32 : not a COM32/COM32R module
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/4127/mounts) leaked on lvs invocation. Parent PID 13433: bash
File descriptor 63 (pipe:[30499]) leaked on lvs invocation. Parent PID 13433: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 20190516_2315 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version :
glade2script version : 3.2.3~ppa4
File descriptor 9 (/proc/4127/mounts) leaked on lvs invocation. Parent PID 5739: /bin/sh
No volume groups found
boot-info is executed in installed-session (Linux Mint 17.1 Rebecca, rebecca, LinuxMint, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro quiet splash
GRUB detected inside Windows partition. Rename /media/tacchon/MULTISYSTEM/boot/grub into boot/grub_old
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Linux Mint 17.1 Rebecca CurrentSession:linux
/dev/sdb1:Windows Recovery Environment (loader):Windows:chain
=================== blkid:
/dev/sda1: UUID="d7c80057-b094-4575-b2b2-682a9f6a6438" TYPE="ext4"
/dev/sda2: UUID="d981eb56-f054-4ff6-b28f-96cda5d29ac8" TYPE="swap"
/dev/sda5: UUID="ae12ab6c-0074-4491-a11d-815d6f5d44d4" TYPE="ext4"
/dev/sdb1: LABEL="MULTISYSTEM" UUID="2BF3-D9B9" TYPE="vfat"
2 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 nov. 26 2014 grub.d
total 88
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 1180 oct. 25 2014 06_mint_theme
-rwxr-xr-x 1 root root 7500 mai 16 23:09 10_linux
-rwxr-xr-x 1 root root 10634 oct. 1 2012 10_lupin
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, .
sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /home.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /media/tacchon/MULTISYSTEM.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-correctEFI, liveusb, not-mmc, has-os, 64 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA WDC WD10EARS-003;
1:1049kB:20.5GB:20.5GB:ext4::boot;
2:20.5GB:21.5GB:1024MB:linux-swap(v1)::;
3:21.5GB:1000GB:979GB:::;
5:21.5GB:1000GB:979GB:ext4::;
BYT;
/dev/sdb:8053MB:scsi:512:512:msdos:VendorCo ProductCode;
1:32.8kB:8053MB:8053MB:fat32::boot, lba;
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: /dev/sr0: unrecognised disk label
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 931,5G
sda1 part ext4 19,1G
sda2 part swap 977M
sda3 part 1K
sda5 part ext4 911,5G
sdb disk 7,5G
sdb1 part vfat 7,5G MULTISYSTEM
sr0 rom 480,1M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /
sda2 1 0 0 [SWAP]
sda3 1 0 0
sda5 1 0 0 /home
sdb 1 0 1 running
sdb1 1 0 1 /media/tacchon/MULTISYSTEM
sr0 1 0 1 running
=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda5 on /home type ext4 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=tacchon)
/dev/sdb1 on /media/tacchon/MULTISYSTEM type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): ati autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk ecryptfs fd full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net watchdog zero
ls /dev/mapper: control
efi files in sdb1/efi: /microsoft/boot/memtest.efi /microsoft/boot/cdboot_noprompt.efi /microsoft/boot/cdboot.efi /BOOT/grubx64.efi /BOOT/bootia32.efi
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 58 90 53 59 53 4c 49 4e 55 58 00 02 08 20 00 |.X.SYSLINUX... .|
00000010 02 00 00 00 00 f8 00 00 3e 00 f8 00 40 00 00 00 |........>...@...|
00000020 f2 fe ef 00 e2 3b 00 00 00 00 00 00 02 00 00 00 |.....;..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 b9 d9 f3 2b 6d 75 6c 74 69 73 79 73 74 |..)...+multisyst|
00000050 65 6d 46 41 54 33 32 20 20 20 fa fc 31 c9 8e d1 |emFAT32 ..1...|
00000060 bc 76 7b 52 06 57 1e 56 8e c1 b1 26 bf 78 7b f3 |.v{R.W.V...&.x{.|
00000070 a5 8e d9 bb 78 00 0f b4 37 0f a0 56 20 d2 78 1b |....x...7..V .x.|
00000080 31 c0 b1 06 89 3f 89 47 02 f3 64 a5 8a 0e 18 7c |1....?.G..d....||
00000090 88 4d f8 50 50 50 50 cd 13 eb 62 8b 55 aa 8b 75 |.M.PPPP...b.U..u|
000000a0 a8 c1 ee 04 01 f2 83 fa 4f 76 31 81 fa b2 07 73 |........Ov1....s|
000000b0 2b f6 45 b4 7f 75 25 38 4d b8 74 20 66 3d 21 47 |+.E..u%8M.t f=!G|
000000c0 50 54 75 10 80 7d b8 ed 75 0a 66 ff 75 ec 66 ff |PTu..}..u.f.u.f.|
000000d0 75 e8 eb 0f 51 51 66 ff 75 bc eb 07 51 51 66 ff |u...QQf.u...QQf.|
000000e0 36 1c 7c b4 08 e8 e9 00 72 13 20 e4 75 0f c1 ea |6.|.....r. .u...|
000000f0 08 42 89 16 1a 7c 83 e1 3f 89 0e 18 7c fb bb aa |.B...|..?...|...|
00000100 55 b4 41 e8 cb 00 72 10 81 fb 55 aa 75 0a f6 c1 |U.A...r...U.u...|
00000110 01 74 05 c6 06 46 7d 00 66 b8 d4 dc 92 00 66 ba |.t...F}.f.....f.|
00000120 00 00 00 00 bb 00 80 e8 0e 00 66 81 3e 1c 80 8a |..........f.>...|
00000130 99 61 6c 75 74 e9 f8 02 66 03 06 60 7b 66 13 16 |.alut...f..`{f..|
00000140 64 7b b9 10 00 eb 2b 66 52 66 50 06 53 6a 01 6a |d{....+fRfP.Sj.j|
00000150 10 89 e6 66 60 b4 42 e8 77 00 66 61 8d 64 10 72 |...f`.B.w.fa.d.r|
00000160 01 c3 66 60 31 c0 e8 68 00 66 61 e2 da c6 06 46 |..f`1..h.fa....F|
00000170 7d 2b 66 60 66 0f b7 36 18 7c 66 0f b7 3e 1a 7c |}+f`f..6.|f..>.||
00000180 66 f7 f6 31 c9 87 ca 66 f7 f7 66 3d ff 03 00 00 |f..1...f..f=....|
00000190 77 17 c0 e4 06 41 08 e1 88 c5 88 d6 b8 01 02 e8 |w....A..........|
000001a0 2f 00 66 61 72 01 c3 e2 c9 31 f6 8e d6 bc 68 7b |/.far....1....h{|
000001b0 8e de 66 8f 06 78 00 be da 7d ac 20 c0 74 09 b4 |..f..x...}. .t..|
000001c0 0e bb 07 00 cd 10 eb f2 31 c0 cd 16 cd 19 f4 eb |........1.......|
000001d0 fd 8a 16 74 7b 06 cd 13 07 c3 42 6f 6f 74 20 65 |...t{.....Boot e|
000001e0 72 72 6f 72 0d 0a 00 00 00 00 00 00 00 00 00 00 |rror............|
000001f0 00 00 00 00 00 00 00 00 fe 02 b2 3e 18 37 55 aa |...........>.7U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 19G 5.9G 12G 33% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 396M 1.5M 394M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 2.0G 139M 1.8G 8% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sda5 ext4 898G 212G 640G 25% /home
/dev/sdb1 vfat 7.5G 4.6G 3.0G 62% /media/tacchon/MULTISYSTEM
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000249ac
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 39999487 19998720 83 Linux
/dev/sda2 39999488 42000383 1000448 82 Linux swap / Solaris
/dev/sda3 42002430 1953523711 955760641 5 Extended
/dev/sda5 42002432 1953523711 955760640 83 Linux
Disk /dev/sdb: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x004f3690
Device Boot Start End Blocks Id System
/dev/sdb1 * 64 15728433 7864185 c W95 FAT32 (LBA)
User choice: Est-ce que sda (msdos) est un disque amovible ? no
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (msdos) !
=================== User settings
The settings chosen by the user will not act on the boot.
pastebinit packages needed
W: Duplicate sources.list entry http://liveusb.info/multisystem/depot/ all/main amd64 Packages (/var/lib/apt/lists/liveusb.info_multisystem_depot_dists_all_main_binary-amd64_Packages)
W: Duplicate sources.list entry http://liveusb.info/multisystem/depot/ all/main i386 Packages (/var/lib/apt/lists/liveusb.info_multisystem_depot_dists_all_main_binary-i386_Packages)
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
debconf: Impossible d'initialiser l'interface : Dialog
debconf: (La variable TERM n'a pas de valeur, l'interface dialog est donc inutilisable.)
debconf: Utilisation de l'interface Readline en remplacement
debconf: Impossible d'initialiser l'interface : Readline
debconf: (Cette interface a besoin d'un terminal de contrôle.)
debconf: Utilisation de l'interface Teletype en remplacement
dpkg-preconfigure: impossible de réouvrir stdin :
paste2.org ko ()
Je me pose la même question que ikewdu au sujet du "second disque dur interne formaté en NTFS simplement pour y mettre un jeu" parce qu'on ne voit pas ce second disque dur interne dans le Boot-Info. Est-ce que tu confirmes que ce second disque dur interne n'était pas connecté quand tu as fait ce Boot-Info ?
Dernière modification par malbo (Le 17/05/2019, à 17:08)
Hors ligne
#4 Le 17/05/2019, à 17:24
- geole
Re : Help -Grub rescue- pour dual boot
Bonjour à tous,
Si vous pouviez m'aider à comprendre le souci et éventuellement m'aider à trouver une solution, merci d'avance. grub rescue
....
Et pour mon dual boot, je dois installer Win en premier et tout formater d'abord mais donc impossible pour le moment.
.
Bonjour
Si cela peut aider.
Je ne connais pas multisystem, mais il est possible qu'il ne fonctionne pas très bien lorsqu'on mélange du 64 bits avec du 32 bits et qu'on veut l'utiliser pour installer windows
/dev/sdb1:Windows Recovery Environment (loader):Windows:chain
GRUB detected inside Windows partition. Rename /media/tacchon/MULTISYSTEM/boot/grub into boot/grub_old
W: Duplicate sources.list entry http://liveusb.info/multisystem/depot/ all/main amd64 Packages (/var/lib/apt/lists/liveusb.info_multisystem_depot_dists_all_main_binary-amd64_Packages)
W: Duplicate sources.list entry http://liveusb.info/multisystem/depot/ all/main i386 Packages (/var/lib/apt/lists/liveusb.info_multisystem_depot_dists_all_main_binary-i386_Packages)
W: Vous pouvez lancer « apt-get update » pour corriger ces problèmes.
J'ai noté que ton ubuntu fonctionne.
boot-info is executed in installed-session (Linux Mint 17.1 Rebecca, rebecca, LinuxMint, x86_64)
et surtout, comme tu veux installer windows sur un autre disque (non connecté actuellement) que SDA, tu n'as pas lieu de toucher à SDA......
L'installeur de windows est suffisamment au point pour préparer correctement le nouveau disque sans que tu aies besoin d'utiliser d'autres logiciels.
Lors de l'installation de windows, sa structure de boot sera accecessible par le MBR du disque sur lequel, il sera installé. Le boot-automatique sera toujours sur SDA.
Il te suffira de faire la commande
sudo update-grub
pour avoir un dual-boot. Attention, cela n'est vrai que si ton installation de windows est faite en mode LEGACY et pas EFI.
Dernière modification par geole (Le 17/05/2019, à 17:26)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#5 Le 17/05/2019, à 20:55
- ikewdu
Re : Help -Grub rescue- pour dual boot
Re,
Ce n'est pas un problème Win de base sinon je ne viendrais pas vous embêter avec ça,
Où est-il, ce Windows qui ne pose pas de problème ?
Hors ligne
#6 Le 17/05/2019, à 23:13
- kurihana30
Re : Help -Grub rescue- pour dual boot
Salut,
Parviens-tu , à l'heure actuelle, à démarrer sur quelque chose ? As-tu tenté de débrancher le second DD ? Quelles sont les références du PC ?
Bonsoir,
oui je peux redémarrer sur mon disque principal c'est ma Mint justement. Et j'ai débranché le second exprès.
J'ai ressorti la config de mon PC, je l'avais monté en 2011 donc je ne sais pas si ça aide ou si j'ai mal fait à l'époque
Dernière modification par kurihana30 (Le 17/05/2019, à 23:13)
Hors ligne
#7 Le 17/05/2019, à 23:33
- kurihana30
Re : Help -Grub rescue- pour dual boot
Je vous réponds à tous ici.
@ikewdu En fait, je crois avoir fait pas mal de bêtises, cela va faire des années que je n'ai plus trop manipulé de lignes de code, je me suis un peu reposé sur mes lauriers, facile avec une Mint me direz vous.
J'ai voulu sauvegarder d'abord mes données sur un disque dur externe, mais comme je n'en n'avais pas mais avais un interne en sus, j'ai fait un branchement dans la tour, seulement au lieu de le partitionner, j'ai complètement zappé, j'ai mis mes données dessus, tout en l'ayant formaté en NTFS avant, car j'allais y mettre Win ensuite dessus. Seulement je crois avoir oublié les bases, ouais plutôt j'en suis sûre, car quand j'ai voulu vérifier mon second disque, après 2 jours sans y toucher, que j'avais bien mes données dessus, ben disons que ma Mint voyait le disque mais ne voulait pas le monter, normal, vu qu'en NTFS... La noob quoi.
J'ai réussi à re-transvaser mes données sur le second disque donc sur un externe d'un pote, et donc ensuite pour repartir au clair, voulu lancer Win avec une clé bootable. Et là, patatra, grub rescue par ci et par là. Et au démarrage, si je tape F12 il me semble, j'ai l'écran du grub qui me propose seulement Mint en normal et en recovery, puis Memory test. Il me propose pas ma clé.
Et même après avoir été dans le BIOS pour passer ma clé en priority boot, au redémarrage elle me remet mon grub avec les options que je viens de mentionner.
AH et du coup je l'ai toujours pas installé et j'ai débranché le second disque car quoiqu'il arrive je n'arrivais à rien; donc je ne sais plus quoi faire et je ne suis pas une pro de la console.
Et pour la dernière phrase, je n'ai pas à la base un problème Win donc je viens bien sur un fofo Ubuntu, me tapez pas
@malbo Et en effet je n'ai pas fait boot info avec le second.
@geole j'ai toujours fait en 64 bits pourtant.
Et pour le reste dont tu me parles, ça irait si seulement la clé bootable se lançait, donc le problème est ailleurs je suppose.
Dernière modification par kurihana30 (Le 18/05/2019, à 00:19)
Hors ligne
#8 Le 18/05/2019, à 08:33
- ikewdu
Re : Help -Grub rescue- pour dual boot
Salut,
Refais un boot-info avec le tout... Sinon, on a peu de chances de t'aider.
Hors ligne
#9 Le 18/05/2019, à 16:37
- viwoan
Re : Help -Grub rescue- pour dual boot
Bonjour,
Je rencontre un problème similaire. Je suis un peu novice navré. Sur mon pc initialement j'ai installé un dual boot Win 7 et Ubuntu.
Tout fonctionnait bien jusqu'au moment où j'ai pris la decision de faire un upgrade Win10. Je suis malheureusement obligé de conserver Win pour certaines activités pro.
J'ai installé pour ce faire un disque SSD (hd1) pour la perfomance. Le tout piloté par Grub.
Voici l'ordre des problemes :
- Upgrade Win 10 sur le disque hd0 => Probleme de Boot suite à l'upgrade mais ce n'est pas un probleme à traiter ici
- Suite Lancement de Win via Grub comme d'habitute qui lance l'update du systeme. cette operation a du modifier le grub qui passe en mode rescue
- J'ai booté depuis une clé Ubuntu pour executer le boot-info ci dessous + sudo update-grub qui ne fonctionne pas de:puis la clé avec le message suivant : /usr/sbin/grub-probe : erreur : impossible d'obtenir le chemin canonique de "/cow"
Je suis un peu paumé. j'ai tenté plusieurs manipulations decrites sur le web notamment les commandes :
Set root= (hd1,msdos5)
set prefix=hd1,msdos5) \boot\grub
insmod normal
mais cela ne fonctionne pas plus.
boot-info : http://paste.ubuntu.com/p/GtMdqKCZVt/
Mille excuses si la reponse à cette question a deja ete fournie une , deux , trois mais je trouve tout fait un probleme identique au mien.
Je ne fais pas plus confiance à mon diagnostic d'amateur..
D'avance merci de votre aide.
Hors ligne
#10 Le 18/05/2019, à 18:05
- ikewdu
Re : Help -Grub rescue- pour dual boot
Salut,
Tu aurais dû créer un autre sujet, mais je te donne tout de même mon avis.
Le rapport boot-info montre qu'aucun Linux n'est trouvé sur ta machine...
1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Je pense que la mise à niveau de Windows a expédié ton Linux aux abonnés absents, ce qui arrive régulièrement dans ce genre de cas (malbo pense que c'est lié à une mauvaise numérotation des partitions... ce qui est possible). On voit sur sdb un énorme espace vide qui devait, je pense, contenir ton Linux:
/dev/sdb3 567,173,118 976,771,071 409,597,954 5 Extended
/dev/sdb5 971,470,848 976,771,071 5,300,224 82 Linux swap / Solaris
Sur sda, la partition ext4 qui s'y trouve ne semble pas contenir de noyau identifié, mais probablement des données ou un /home :
/dev/sda5 393,523,200 625,141,759 231,618,560 83 Linux
/dev/sda5 ext4 109G 94G 9.0G 92% /mnt/boot-sav/sda5
Bref, il va falloir, je le crains, réinstaller ton Linux.
Dernière modification par ikewdu (Le 18/05/2019, à 18:09)
Hors ligne
#11 Le 18/05/2019, à 19:33
- kurihana30
Re : Help -Grub rescue- pour dual boot
Salut,
Refais un boot-info avec le tout... Sinon, on a peu de chances de t'aider.
Bonjour,
je viens donc de rebrancher le second disque.
Voici le boot info
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> No known boot loader is installed in the MBR of /dev/sdb.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fat part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sdb2: __________________________________________________________________________
File system:
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
sdb3: __________________________________________________________________________
File system:
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
mount: unknown filesystem type ''
sdb4: __________________________________________________________________________
File system:
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
mount: unknown filesystem type ''
mount: unknown filesystem type ''
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: Syslinux 4.03 or higher
Boot sector info: Syslinux looks at sector 9624788 of /dev/sdc1 for its
second stage. It is very unlikely that Syslinux is
(still) installed. The second stage could not be
found. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/syslinux/syslinux.cfg /EFI/BOOT/bootia32.efi
/EFI/BOOT/grubx64.efi /EFI/microsoft/boot/cdboot.efi
/EFI/microsoft/boot/cdboot_noprompt.efi
/EFI/microsoft/boot/memtest.efi /bootmgr /boot/bcd
/boot/syslinux/ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 39,999,487 39,997,440 83 Linux
/dev/sda2 39,999,488 42,000,383 2,000,896 82 Linux swap / Solaris
/dev/sda3 42,002,430 1,953,523,711 1,911,521,282 5 Extended
/dev/sda5 42,002,432 1,953,523,711 1,911,521,280 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 ? 6,579,571 1,924,427,647 1,917,848,077 70 DiskSecure Multi-Boot
/dev/sdb2 ? 1,953,251,627 3,771,827,541 1,818,575,915 43 Unknown
/dev/sdb3 ? 225,735,265 225,735,274 10 72 Unknown
/dev/sdb4 2,642,411,520 2,642,463,409 51,890 0 Empty
/dev/sdb1 overlaps with /dev/sdb3
/dev/sdb2 ends after the last sector of /dev/sdb
/dev/sdb2 overlaps with /dev/sdb4
/dev/sdb4 ends after the last sector of /dev/sdb
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 64 15,728,433 15,728,370 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 d7c80057-b094-4575-b2b2-682a9f6a6438 ext4
/dev/sda2 d981eb56-f054-4ff6-b28f-96cda5d29ac8 swap
/dev/sda5 ae12ab6c-0074-4491-a11d-815d6f5d44d4 ext4
/dev/sdc1 2BF3-D9B9 vfat MULTISYSTEM
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 May 18 19:23 ata-ST1000DM003-1ER162_Z4Y5ZV8Y -> ../../sdb
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-ST1000DM003-1ER162_Z4Y5ZV8Y-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-ST1000DM003-1ER162_Z4Y5ZV8Y-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 May 18 19:19 ata-TSSTcorp_CDDVDW_SH_R41368DB157426 -> ../../sr0
lrwxrwxrwx 1 root root 9 May 18 19:23 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598 -> ../../sda
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 18 19:18 ata-WDC_WD10EARS-003BB1_WD-WCAV5N800598-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 May 18 19:23 usb-VendorCo_ProductCode_9207005716265638155-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 May 18 19:18 usb-VendorCo_ProductCode_9207005716265638155-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 May 18 19:23 wwn-0x5000c5007ad37118 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x5000c5007ad37118-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x5000c5007ad37118-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 May 18 19:23 wwn-0x50014ee25ad986e2 -> ../../sda
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x50014ee25ad986e2-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x50014ee25ad986e2-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x50014ee25ad986e2-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May 18 19:18 wwn-0x50014ee25ad986e2-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sda5 /home ext4 (rw)
/dev/sdc1 /media/tacchon/MULTISYSTEM vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="menuentry 'Windows Recovery Environment (loader) (on /dev/sdb1)' --class windows --class os 'osprober-chain-2BF3-D9B9' {"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
linux /boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-37-generic
}
menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
echo 'Loading Linux 3.13.0-37-generic ...'
linux /boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-37-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d7c80057-b094-4575-b2b2-682a9f6a6438
else
search --no-floppy --fs-uuid --set=root d7c80057-b094-4575-b2b2-682a9f6a6438
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda5 during installation
UUID=ae12ab6c-0074-4491-a11d-815d6f5d44d4 /home ext4 defaults 0 2
# swap was on /dev/sda2 during installation
UUID=d981eb56-f054-4ff6-b28f-96cda5d29ac8 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
8.261577606 = 8.870801408 boot/grub/grub.cfg 1
17.040481567 = 18.297077760 boot/grub/i386-pc/core.img 1
16.945373535 = 18.194956288 boot/vmlinuz-3.13.0-37-generic 1
16.945373535 = 18.194956288 vmlinuz 1
3.199821472 = 3.435782144 boot/initrd.img-3.13.0-37-generic 1
3.199821472 = 3.435782144 initrd.img 1
======================= sdc1/boot/syslinux/syslinux.cfg: =======================
--------------------------------------------------------------------------------
#http://www.syslinux.org/wiki/index.php?title=SYSLINUX#UI_module_options...
#default /boot/syslinux/vesamenu.c32
UI /boot/syslinux/vesamenu.c32
prompt 0
timeout 40
ontimeout 0
MENU TITLE MultiSystem LiveUSB
MENU DEFAULT 0
MENU BACKGROUND /boot/splash/splash.png
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|28-04-2019-20:40:07-101431183|sources|multisystem-windows|5163Mio|
label win
MENU LABEL Windows install
KERNEL chain.c32 hd0 1 ntldr=/bootmgr
#MULTISYSTEM_MENU_FIN|28-04-2019-20:40:07-101431183|sources|multisystem-windows|5163Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
label 0
MENU LABEL PLoP Boot Manager
KERNEL /boot/img/plpbt
label 1
MENU LABEL Grub2
kernel /boot/syslinux/chain.c32 file=/boot/grub/boot.img
label 2
MENU LABEL Grub4Dos
kernel /boot/grub.exe
LABEL 3
MENU LABEL Hardware Detection Tool
KERNEL /boot/syslinux/hdt.c32
#Exemple pour booter un iso avec version recente de memdisk
#label 4
#MENU LABEL boot iso
#KERNEL /boot/syslinux/memdisk
#APPEND iso raw initrd=/g4u.iso
#LABEL 5
#KERNEL /boot/syslinux/memdisk
#APPEND initrd=freebsd.img floppy
#LABEL 6
#MENU LABEL Chainer win
#KERNEL /boot/syslinux/chain.c32 ntldr=/ntldr
#LABEL 7
#MENU LABEL Chainer partition 2
#kernel /boot/syslinux/chain.c32
#append hd0 2
--------------------------------------------------------------------------------
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? boot/syslinux/syslinux.cfg 1
?? = ?? boot/syslinux/ldlinux.sys 1
?? = ?? boot/syslinux/chain.c32 1
?? = ?? boot/syslinux/hdt.c32 1
?? = ?? boot/syslinux/ifplop.c32 1
?? = ?? boot/syslinux/menu.c32 1
?? = ?? boot/syslinux/reboot.c32 1
?? = ?? boot/syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
boot/syslinux/chain.c32 : not a COM32/COM32R module
boot/syslinux/hdt.c32 : not a COM32/COM32R module
boot/syslinux/ifplop.c32 : not a COM32/COM32R module
boot/syslinux/menu.c32 : not a COM32/COM32R module
boot/syslinux/reboot.c32 : not a COM32/COM32R module
boot/syslinux/vesamenu.c32 : not a COM32/COM32R module
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown MBR on /dev/sdb
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 af 6d 70 74 00 00 00 00 |.........mpt....|
00000030 04 00 00 00 00 00 00 00 da 06 47 07 00 00 00 00 |..........G.....|
00000040 f6 00 00 00 01 00 00 00 42 cd 83 0a 39 77 b8 72 |........B...9w.r|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
Unknown BootLoader on sdb2
00000000 06 6b 6f 19 f1 e8 3d 12 ed d8 10 81 02 e4 ca ae |.ko...=.........|
00000010 8f 69 79 77 9a c0 85 41 98 d8 0c db 40 f8 5f fd |.iyw...A....@._.|
00000020 8f c4 b1 ed c1 e8 35 1f 83 5d e8 ec 4a 82 40 28 |......5..]..J.@(|
00000030 28 30 29 93 fb c4 e9 32 ef fc 79 e1 ed 0f b5 e0 |(0)....2..y.....|
00000040 de 07 81 ff 64 19 53 01 0f de 5f 55 2b 70 37 d5 |....d.S..._U+p7.|
00000050 83 17 84 31 25 55 12 84 bf 8f 87 e2 57 f9 f8 0c |...1%U......W...|
00000060 a0 48 da d7 74 78 6c 10 5f 54 3e 56 25 aa 12 b0 |.H..txl._T>V%...|
00000070 7a 3a 16 89 3e 56 10 f3 44 af 02 07 a7 fe a5 58 |z:..>V..D......X|
00000080 06 83 55 7e 9e f7 20 30 e9 52 aa ac 7d 4b ed 03 |..U~.. 0.R..}K..|
00000090 7f eb 26 8b d5 d1 e8 f2 8f cb 82 10 fc bf d3 fa |..&.............|
000000a0 0c a1 4a b0 84 ac be 34 ac 7d 65 cd 54 bc 82 3f |..J....4.}e.T..?|
000000b0 1e e2 14 96 ea 67 45 62 40 3c 1c 02 34 7e a5 5a |.....gEb@<..4~.Z|
000000c0 b1 fc fa a0 61 ea a5 2a 26 7b fc f9 74 50 b2 b1 |....a..*&{..tP..|
000000d0 88 fd 50 41 f9 7d f8 36 03 02 80 48 12 ef f6 03 |..PA.}.6...H....|
000000e0 6f a2 80 42 f0 eb ca 87 de 57 f9 2a b6 55 ed be |o..B.....W.*.U..|
000000f0 9a d1 e6 20 78 7c 3e f1 74 1d 89 00 c5 fe 06 1f |... x|>.t.......|
00000100 89 14 18 46 2f f8 f2 04 1f 40 60 30 01 f0 b8 0e |...F/....@`0....|
00000110 17 17 ce bb fa b0 3d eb f8 ab 37 8a 7e a2 27 ac |......=...7.~.'.|
00000120 42 19 8a ec 05 17 81 0c bd 82 e0 59 90 e0 78 20 |B..........Y..x |
00000130 5d 09 5f 1f aa 54 3f 1f 09 1a 07 47 fd 8a 94 29 |]._..T?....G...)|
00000140 fe 33 7f 44 4f 11 83 65 54 25 09 1f 2e f1 7c 2f |.3.DO..eT%....|/|
00000150 00 f1 2c 7e 0f 05 ff 08 92 d7 d5 0f e0 8c 01 85 |..,~............|
00000160 d0 14 83 e2 e4 0f 1f a9 00 d5 60 c2 37 c1 84 82 |..........`.7...|
00000170 e2 e5 40 a4 00 d5 7e 04 35 74 45 ff ea b5 6a 87 |..@...~.5tE...j.|
00000180 8a 6f 3d 9e c6 61 32 90 44 3f 06 df e1 7f c2 11 |.o=..a2.D?......|
00000190 70 06 7c 10 ff 2c 04 3d 56 3e 1f 02 9c 0f 28 57 |p.|..,.=V>....(W|
000001a0 aa d5 41 13 dd da 44 5f e1 f8 92 ae 55 53 c0 c3 |..A...D_....US..|
000001b0 e2 e0 0f d0 43 2f 04 38 ab ca ac a3 a1 e0 40 2e |....C/.8......@.|
000001c0 57 f5 4a 80 e2 8d 2f bb ba 23 30 e2 3f aa ee 37 |W.J.../..#0.?..7|
000001d0 91 2d c3 ea be 25 8f 95 2b f1 75 fa 85 62 58 33 |.-...%..+.u..bX3|
000001e0 42 f1 2e ab 00 fd c2 f0 80 10 0b 80 cd 55 e1 d0 |B............U..|
000001f0 fe 97 08 c2 58 95 61 7a b1 d1 7b 4a c7 bf fa d0 |....X.az..{J....|
00000200
Unknown BootLoader on sdb3
Unknown BootLoader on sdb4
=============================== StdErr Messages: ===============================
hexdump: /dev/sdb3: No such file or directory
hexdump: /dev/sdb3: No such file or directory
hexdump: /dev/sdb4: No such file or directory
hexdump: /dev/sdb4: No such file or directory
File descriptor 9 (/proc/16130/mounts) leaked on lvs invocation. Parent PID 25867: bash
File descriptor 63 (pipe:[37955]) leaked on lvs invocation. Parent PID 25867: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 20190518_1923 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version :
glade2script version : 3.2.3~ppa4
File descriptor 9 (/proc/16130/mounts) leaked on lvs invocation. Parent PID 17727: /bin/sh
No volume groups found
boot-info is executed in installed-session (Linux Mint 17.1 Rebecca, rebecca, LinuxMint, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=d7c80057-b094-4575-b2b2-682a9f6a6438 ro quiet splash
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Linux Mint 17.1 Rebecca CurrentSession:linux
/dev/sdc1:Windows Recovery Environment (loader):Windows:chain
=================== blkid:
/dev/sda1: UUID="d7c80057-b094-4575-b2b2-682a9f6a6438" TYPE="ext4"
/dev/sda2: UUID="d981eb56-f054-4ff6-b28f-96cda5d29ac8" TYPE="swap"
/dev/sda5: UUID="ae12ab6c-0074-4491-a11d-815d6f5d44d4" TYPE="ext4"
/dev/sdc1: LABEL="MULTISYSTEM" UUID="2BF3-D9B9" TYPE="vfat"
2 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 nov. 26 2014 grub.d
total 88
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 1180 oct. 25 2014 06_mint_theme
-rwxr-xr-x 1 root root 7500 mai 18 19:18 10_linux
-rwxr-xr-x 1 root root 10634 oct. 1 2012 10_lupin
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 2014 40_custom
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT="menuentry 'Windows Recovery Environment (loader) (on /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-chain-2BF3-D9B9' {"
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, .
sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /home.
sdc1 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /media/tacchon/MULTISYSTEM.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-correctEFI, liveusb, not-mmc, has-os, 64 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA WDC WD10EARS-003;
1:1049kB:20.5GB:20.5GB:ext4::boot;
2:20.5GB:21.5GB:1024MB:linux-swap(v1)::;
3:21.5GB:1000GB:979GB:::;
5:21.5GB:1000GB:979GB:ext4::;
BYT;
/dev/sdb:1000GB:scsi:512:4096:loop:ATA ST1000DM003-1ER1;
1:0.00B:1000GB:1000GB:ntfs::;
BYT;
/dev/sdc:8053MB:scsi:512:512:msdos:VendorCo ProductCode;
1:32.8kB:8053MB:8053MB:fat32::boot, lba;
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error: /dev/sr0: unrecognised disk label
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 931,5G
sda1 part ext4 19,1G
sda2 part swap 977M
sda3 part 1K
sda5 part ext4 911,5G
sdb disk ntfs 931,5G Moko
sdb1 part 811,6G
sdb2 part 346,1G
sdc disk 7,5G
sdc1 part vfat 7,5G MULTISYSTEM
sr0 rom 480,1M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /
sda2 1 0 0 [SWAP]
sda3 1 0 0
sda5 1 0 0 /home
sdb 1 0 0 running
sdb1 1 0 0
sdb2 1 0 0
sdc 1 0 1 running
sdc1 1 0 1 /media/tacchon/MULTISYSTEM
sr0 1 0 1 running
=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda5 on /home type ext4 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=tacchon)
/dev/sdc1 on /media/tacchon/MULTISYSTEM type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): ati autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk ecryptfs fd full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sdb sdb1 sdb2 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb vga_arbiter vhci vhost-net watchdog zero
ls /dev/mapper: control
efi files in sdc1/efi: /microsoft/boot/memtest.efi /microsoft/boot/cdboot_noprompt.efi /microsoft/boot/cdboot.efi /BOOT/grubx64.efi /BOOT/bootia32.efi
=================== hexdump -n512 -C /dev/sdc1
00000000 eb 58 90 53 59 53 4c 49 4e 55 58 00 02 08 20 00 |.X.SYSLINUX... .|
00000010 02 00 00 00 00 f8 00 00 3e 00 f8 00 40 00 00 00 |........>...@...|
00000020 f2 fe ef 00 e2 3b 00 00 00 00 00 00 02 00 00 00 |.....;..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 b9 d9 f3 2b 6d 75 6c 74 69 73 79 73 74 |..)...+multisyst|
00000050 65 6d 46 41 54 33 32 20 20 20 fa fc 31 c9 8e d1 |emFAT32 ..1...|
00000060 bc 76 7b 52 06 57 1e 56 8e c1 b1 26 bf 78 7b f3 |.v{R.W.V...&.x{.|
00000070 a5 8e d9 bb 78 00 0f b4 37 0f a0 56 20 d2 78 1b |....x...7..V .x.|
00000080 31 c0 b1 06 89 3f 89 47 02 f3 64 a5 8a 0e 18 7c |1....?.G..d....||
00000090 88 4d f8 50 50 50 50 cd 13 eb 62 8b 55 aa 8b 75 |.M.PPPP...b.U..u|
000000a0 a8 c1 ee 04 01 f2 83 fa 4f 76 31 81 fa b2 07 73 |........Ov1....s|
000000b0 2b f6 45 b4 7f 75 25 38 4d b8 74 20 66 3d 21 47 |+.E..u%8M.t f=!G|
000000c0 50 54 75 10 80 7d b8 ed 75 0a 66 ff 75 ec 66 ff |PTu..}..u.f.u.f.|
000000d0 75 e8 eb 0f 51 51 66 ff 75 bc eb 07 51 51 66 ff |u...QQf.u...QQf.|
000000e0 36 1c 7c b4 08 e8 e9 00 72 13 20 e4 75 0f c1 ea |6.|.....r. .u...|
000000f0 08 42 89 16 1a 7c 83 e1 3f 89 0e 18 7c fb bb aa |.B...|..?...|...|
00000100 55 b4 41 e8 cb 00 72 10 81 fb 55 aa 75 0a f6 c1 |U.A...r...U.u...|
00000110 01 74 05 c6 06 46 7d 00 66 b8 d4 dc 92 00 66 ba |.t...F}.f.....f.|
00000120 00 00 00 00 bb 00 80 e8 0e 00 66 81 3e 1c 80 8a |..........f.>...|
00000130 99 61 6c 75 74 e9 f8 02 66 03 06 60 7b 66 13 16 |.alut...f..`{f..|
00000140 64 7b b9 10 00 eb 2b 66 52 66 50 06 53 6a 01 6a |d{....+fRfP.Sj.j|
00000150 10 89 e6 66 60 b4 42 e8 77 00 66 61 8d 64 10 72 |...f`.B.w.fa.d.r|
00000160 01 c3 66 60 31 c0 e8 68 00 66 61 e2 da c6 06 46 |..f`1..h.fa....F|
00000170 7d 2b 66 60 66 0f b7 36 18 7c 66 0f b7 3e 1a 7c |}+f`f..6.|f..>.||
00000180 66 f7 f6 31 c9 87 ca 66 f7 f7 66 3d ff 03 00 00 |f..1...f..f=....|
00000190 77 17 c0 e4 06 41 08 e1 88 c5 88 d6 b8 01 02 e8 |w....A..........|
000001a0 2f 00 66 61 72 01 c3 e2 c9 31 f6 8e d6 bc 68 7b |/.far....1....h{|
000001b0 8e de 66 8f 06 78 00 be da 7d ac 20 c0 74 09 b4 |..f..x...}. .t..|
000001c0 0e bb 07 00 cd 10 eb f2 31 c0 cd 16 cd 19 f4 eb |........1.......|
000001d0 fd 8a 16 74 7b 06 cd 13 07 c3 42 6f 6f 74 20 65 |...t{.....Boot e|
000001e0 72 72 6f 72 0d 0a 00 00 00 00 00 00 00 00 00 00 |rror............|
000001f0 00 00 00 00 00 00 00 00 fe 02 b2 3e 18 37 55 aa |...........>.7U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda1 ext4 19G 5.8G 12G 33% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 396M 1.5M 394M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 2.0G 65M 1.9G 4% /run/shm
none tmpfs 100M 16K 100M 1% /run/user
/dev/sda5 ext4 898G 212G 640G 25% /home
/dev/sdc1 vfat 7.5G 4.6G 3.0G 62% /media/tacchon/MULTISYSTEM
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000249ac
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 39999487 19998720 83 Linux
/dev/sda2 39999488 42000383 1000448 82 Linux swap / Solaris
/dev/sda3 42002430 1953523711 955760641 5 Extended
/dev/sda5 42002432 1953523711 955760640 83 Linux
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x2052474d
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sdb1 ? 6579571 1924427647 958924038+ 70 DiskSecure Multi-Boot
Partition 1 does not start on physical sector boundary.
/dev/sdb2 ? 1953251627 3771827541 909287957+ 43 Unknown
Partition 2 does not start on physical sector boundary.
/dev/sdb3 ? 225735265 225735274 5 72 Unknown
Partition 3 does not start on physical sector boundary.
/dev/sdb4 2642411520 2642463409 25945 0 Empty
Partition table entries are not in disk order
Disk /dev/sdc: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x004f3690
Device Boot Start End Blocks Id System
/dev/sdc1 * 64 15728433 7864185 c W95 FAT32 (LBA)
User choice: Est-ce que sda (msdos) est un disque amovible ? no
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (msdos) !
=================== User settings
The settings chosen by the user will not act on the boot.
Hors ligne
#12 Le 19/05/2019, à 00:02
- viwoan
Re : Help -Grub rescue- pour dual boot
Hello, c'est bien ce que je craignais.
Merci pour le support !
Salut,
Tu aurais dû créer un autre sujet, mais je te donne tout de même mon avis.
Le rapport boot-info montre qu'aucun Linux n'est trouvé sur ta machine...
1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Je pense que la mise à niveau de Windows a expédié ton Linux aux abonnés absents, ce qui arrive régulièrement dans ce genre de cas (malbo pense que c'est lié à une mauvaise numérotation des partitions... ce qui est possible). On voit sur sdb un énorme espace vide qui devait, je pense, contenir ton Linux:
/dev/sdb3 567,173,118 976,771,071 409,597,954 5 Extended /dev/sdb5 971,470,848 976,771,071 5,300,224 82 Linux swap / Solaris
Sur sda, la partition ext4 qui s'y trouve ne semble pas contenir de noyau identifié, mais probablement des données ou un /home :
/dev/sda5 393,523,200 625,141,759 231,618,560 83 Linux /dev/sda5 ext4 109G 94G 9.0G 92% /mnt/boot-sav/sda5
Bref, il va falloir, je le crains, réinstaller ton Linux.
Hors ligne
#13 Le 19/05/2019, à 00:32
- kurihana30
Re : Help -Grub rescue- pour dual boot
Et en plus, j'ai beau sélectionner la clé USB dans le BIOS pour la mettre en priorité, mais à l'allumage, il a rebasculé sur le disque dur. Même avec la touche F8.
Hors ligne
#14 Le 19/05/2019, à 01:24
- ikewdu
Re : Help -Grub rescue- pour dual boot
Salut,
Le premier disque est normal et tu peux booter normalement. Mais le second est HS illisible. Donc, plus de Windows. Quant à la clé USB, essaie de la refaire avec Unetbootin ou Etcher, voire Rufus si tu as un windows.
Dernière modification par ikewdu (Le 20/05/2019, à 07:11)
Hors ligne
#15 Le 19/05/2019, à 19:17
- kurihana30
Re : Help -Grub rescue- pour dual boot
Bonjour,
le second HS ? Il est presque neuf, mais bon tant pis on va voir. Dans ce cas je ferais un dual boot sur un seul disque.
J'essaye unetbootin (dont je me servais avant en plus), et je reviens ici ensuite, merci.
Hors ligne
#16 Le 19/05/2019, à 23:46
- geole
Re : Help -Grub rescue- pour dual boot
Bonsoir
Rien ne prouve que ton second disque est H.S.
La seule évidence est que, fonctionnellement parlant, les descriptions des partitions sont plus qu'anormales
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 ? 6,579,571 1,924,427,647 1,917,848,077 70 DiskSecure Multi-Boot
/dev/sdb2 ? 1,953,251,627 3,771,827,541 1,818,575,915 43 Unknown
/dev/sdb3 ? 225,735,265 225,735,274 10 72 Unknown
/dev/sdb4 2,642,411,520 2,642,463,409 51,890 0 Empty
/dev/sdb1 overlaps with /dev/sdb3
/dev/sdb2 ends after the last sector of /dev/sdb
/dev/sdb2 overlaps with /dev/sdb4
/dev/sdb4 ends after the last sector of /dev/sdb
Pour savoir si physiquement le disque a un problème, il faut faire un état smart https://doc.ubuntu-fr.org/smartmontools
A) Faire l'installation.
sudo apt-get install --no-install-recommends smartmontools
B) publier le retour de cette commande
sudo smartctl -s on -a /dev/sdb
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#17 Le 20/05/2019, à 07:10
- ikewdu
Re : Help -Grub rescue- pour dual boot
Salut,
Quand je dis HS, je veux dire inexploitable dans l'état. Abus de langage de ma part, en effet. J'ai modifié le message. Il faut bien sûr le vérifier et faire un rapport smart pour déterminer si c'est simplement un problème de table de partitions ou si c'est plus sérieux.
Dernière modification par ikewdu (Le 20/05/2019, à 07:12)
Hors ligne
#18 Le 20/05/2019, à 16:33
- kurihana30
Re : Help -Grub rescue- pour dual boot
Bonjour,
ah d'accord. En effet, rien qu'à voir mes partitions là, je bug et je sèche, elles sont en effet bizarroïdes même.
J'ai bien utilisé unetbootin hier, essayé de la lancer en modifiant le bios au début, rien n'y a fait. Au reboot, il rebascule sur mon disque dur numéro 1. J'essaye désormais smartools mais ça ne résout pas l'histoire avec la clé usb. Ou bien ?
Hors ligne
#19 Le 20/05/2019, à 16:42
- kurihana30
Re : Help -Grub rescue- pour dual boot
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-37-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1ER162
Serial Number: Z4Y5ZV8Y
LU WWN Device Id: 5 000c50 07ad37118
Firmware Version: CC45
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon May 20 16:33:36 2019 CEST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 80) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 106) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 105 099 006 Pre-fail Always - 7771616
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 36
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 58033
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 81
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 36
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 076 075 045 Old_age Always - 24 (Min/Max 24/24)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 18
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 58
194 Temperature_Celsius 0x0022 024 040 000 Old_age Always - 24 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 83h+04m+35.213s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 937056061
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1441427
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Hors ligne
#20 Le 20/05/2019, à 17:59
- geole
Re : Help -Grub rescue- pour dual boot
Bonjour
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-37-generic] (local build) Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST1000DM003-1ER162 Serial Number: Z4Y5ZV8Y ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/223651en ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 36 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 81 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged .
Ton disque est physiquement en bon état.
Son firmware est à jour car ce n'est pas le modèle ST1000DM003 9YN162 1TB.
Il y a donc eu un raté logiciel:
Essaies de lancer gparted et de supprimer toutes les partitions puis de créer une table de partition au format MS-DOS . puis les partitions dont tu as besoin.
Si tu prévois plus de quatre partitions, fais une table de partition au format GPT. (pas compatible avec les ordinateurs du siecle passé)..
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#21 Le 20/05/2019, à 18:14
- kurihana30
Re : Help -Grub rescue- pour dual boot
Je ne vois pas comment formater en ms dos par contre https://zupimages.net/up/19/21/v3b5.png
Bon à force d'acharnement et malgré mes yeux qui piquent à force d'être dessus, j'ai pu formater en ms dos finalement.
Après lancement de la clé USB bootable avec Windows dessus et bien j'ai un boot error
Dernière modification par kurihana30 (Le 20/05/2019, à 18:37)
Hors ligne
#22 Le 20/05/2019, à 19:12
- kurihana30
Re : Help -Grub rescue- pour dual boot
Et là j'ai essayé avec une clé bootable linux, au démarrage il me met un isolinux.bin missing.
Est-ce que ça peut donner une indication sur pourquoi ça ne fonctionne pas?
Hors ligne
#23 Le 20/05/2019, à 21:23
- ikewdu
Re : Help -Grub rescue- pour dual boot
Petite question, car j'ai perdu le fil : tu veux créer une clé d'installation de Windows ou d'autre chose ?
Hors ligne
#24 Le 20/05/2019, à 22:52
- kurihana30
Re : Help -Grub rescue- pour dual boot
Petite question, car j'ai perdu le fil : tu veux créer une clé d'installation de Windows ou d'autre chose ?
Au début c'était pas ça car j'avais un problème de Grub et au final je pense que maintenant c'est peut-être réglé, et je veux installer effectivement Win sur mon second disque dur et ensuite faire un dual boot avec Linux à côté.
La clé win est réussie grâce à vous tantôt, mais impossible de la lancer, elle est visible mais au démarrage elle fait boot error. Alors je ne suis pas sûre si c'est à cause des manipulations précédentes .
J'ai déjà une clé d'install linux de prête également
Hors ligne
#25 Le 28/05/2019, à 19:51
- kurihana30
Re : Help -Grub rescue- pour dual boot
Bonsoir, comment fermer ce post ?
Je n'arrive à rien le sujet va mourir donc autant le fermer.
On va me prêter un ordinateur avec un disque dur formaté en ext4 je vais me débrouiller avec ça quelques temps. Je reviendrais ici si je n'arrive pas à trouver une autre solution avant.
Merci de l'aide apportée. Et vive le libre !
Hors ligne
Pages : 1