#1 Le 18/07/2019, à 13:01
- Carroués
[Résolu] - Mon PC ne démarre plus !
Bonjour à tous,
Ça fait des années que je ne visite quasiment plus les forums de ce site… cependant j'ai bien cherché ici et ailleurs pour résoudre mon problème, sans trouver de solution.
Le problème est dans le titre. Depuis 3-4 jours j'ai du mal à démarrer mon PC, et aujourd'hui c'est carrément impossible. Je vous écris depuis ce même PC, en Live USB Ubuntu 19.04.
Le PC est assez ancien : environ 11 ans pour la carte mère, mais les DD sont plus récents dont un SSD très récent : j'ai tout assemblé moi-même. Habituellement, il tourne tranquillement sous Ubuntu Gnome 19.04, à l'aise pour mes besoins de surf, bureautique et mail.
Ci-joint les composants matériels :
ubuntu@ubuntu:~$ sudo lshw -html -short
Chemin matériel Périphérique Classe Description
==================================================================
system MS-7367 (To Be Filled B
/0 bus MS-7367
/0/0 memory 64KiB BIOS
/0/4 processor AMD Athlon(tm) 64 X2 Du
/0/4/5 memory 256KiB L1 cache
/0/4/6 memory 1MiB L2 cache
/0/2b memory 8GiB Mémoire Système
/0/2b/0 memory 2GiB DIMM DDR2 Synchron
/0/2b/1 memory 2GiB DIMM DDR2 Synchron
/0/2b/2 memory 2GiB DIMM DDR2 Synchron
/0/2b/3 memory 2GiB DIMM DDR2 Synchron
/0/100 bridge RS690 Host Bridge
/0/100/2 bridge RS690 PCI to PCI Bridge
/0/100/2/0 display Cedar [Radeon HD 5000/6
/0/100/2/0.1 multimedia Cedar HDMI Audio [Radeo
/0/100/7 bridge RS690 PCI to PCI Bridge
/0/100/7/0 enp2s0 network RTL8111/8168/8411 PCI E
/0/100/12 storage SB600 Non-Raid-5 SATA
/0/100/13 bus SB600 USB (OHCI0)
/0/100/13/1 usb2 bus OHCI PCI host controlle
/0/100/13.1 bus SB600 USB (OHCI1)
/0/100/13.1/1 usb3 bus OHCI PCI host controlle
/0/100/13.1/1/2 input 2.4G Mouse
/0/100/13.2 bus SB600 USB (OHCI2)
/0/100/13.2/1 usb4 bus OHCI PCI host controlle
/0/100/13.3 bus SB600 USB (OHCI3)
/0/100/13.3/1 usb5 bus OHCI PCI host controlle
/0/100/13.4 bus SB600 USB (OHCI4)
/0/100/13.4/1 usb6 bus OHCI PCI host controlle
/0/100/13.5 bus SB600 USB Controller (E
/0/100/13.5/1 usb1 bus EHCI Host Controller
/0/100/13.5/1/6 scsi6 storage USB DISK 2.0
/0/100/13.5/1/6/0.0.0 /dev/sdd disk 8019MB USB DISK 2.0
/0/100/13.5/1/6/0.0.0/0 /dev/sdd disk 8019MB
/0/100/13.5/1/6/0.0.0/0/1 /dev/sdd1 volume 7647MiB Windows FAT vol
/0/100/13.5/1/8 scsi7 storage USB Storage
/0/100/13.5/1/8/0.0.0 /dev/sde disk STORAGE DEVICE
/0/100/13.5/1/8/0.0.0/0 /dev/sde disk
/0/100/13.5/1/8/0.0.1 /dev/sdf disk STORAGE DEVICE
/0/100/13.5/1/8/0.0.1/0 /dev/sdf disk
/0/100/13.5/1/8/0.0.2 /dev/sdg disk STORAGE DEVICE
/0/100/13.5/1/8/0.0.2/0 /dev/sdg disk
/0/100/13.5/1/8/0.0.3 /dev/sdh disk STORAGE DEVICE
/0/100/13.5/1/8/0.0.3/0 /dev/sdh disk
/0/100/14 bus SBx00 SMBus Controller
/0/100/14.1 storage SB600 IDE
/0/100/14.2 multimedia SBx00 Azalia (Intel HDA
/0/100/14.3 bridge SB600 PCI to LPC Bridge
/0/100/14.4 bridge SBx00 PCI to PCI Bridge
/0/101 bridge K8 [Athlon64/Opteron] H
/0/102 bridge K8 [Athlon64/Opteron] A
/0/103 bridge K8 [Athlon64/Opteron] D
/0/104 bridge K8 [Athlon64/Opteron] M
/0/1 scsi2 storage
/0/1/0.0.0 /dev/sda disk 120GB PNY CS900 120GB
/0/1/0.0.0/1 /dev/sda1 volume 51GiB Volume EXT4
/0/1/0.0.0/2 /dev/sda2 volume 30GiB Volume EXT4
/0/1/0.0.0/3 /dev/sda3 volume 30GiB Volume EXT4
/0/2 scsi3 storage
/0/2/0.0.0 /dev/sdb disk 1TB WDC WD10EZEX-00R
/0/2/0.0.0/1 /dev/sdb1 volume 150GiB Volume EXT4
/0/2/0.0.0/2 /dev/sdb2 volume 781GiB Volume EXT4
/0/3 scsi4 storage
/0/3/0.0.0 /dev/sdc disk 1TB TOSHIBA HDWD110
/0/3/0.0.0/1 /dev/sdc1 volume 931GiB Volume EXT4
/0/5 scsi5 storage
/0/5/0.0.0 /dev/cdrom disk DVDRAM GH20NS15
Donc, jusqu'il y a quelques jours aucun souci. Depuis le rajout du disque SSD il y a 3 mois environ, gain de rapidité notamment au démarrage.
Depuis quelque jours, j'ai des messages d'erreur au démarrage, dans le pire des cas sans avoir le menu de démarrage de Grub, j'obtiens directement :
error : attempt to read or write outside of disk 'hd0'
Entering rescue mode : grub rescue > _
Dans le meilleur des cas, j'obtiens le menu de démarrage de grub, mais c'est la même chose sauf traduit en français :
Tentative de lecture ou d'écriture en dehors de 'hd0'…
Je précise que je ne peux même pas lancer Recovery Mode.
Muni de ma clé USB, j'ai tenté des dépannages par fsck sur l'ensemble des disques : RAS.
Mes analyses avec smartmontools semblent bonnes (mais p-ê à approfondir de ce côté-là car je ne suis pas à l'aise avec cet outil).
Ci-joint la configuration des disques en retour de sudo fdisk -l :
Disque /dev/sda : 111,8 GiB, 120034123776 octets, 234441648 secteurs
Disk model: PNY CS900 120GB
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x2a748e23
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sda1 2048 108611583 108609536 51,8G 83 Linux
/dev/sda2 108611584 171526143 62914560 30G 83 Linux
/dev/sda3 * 171526144 234441647 62915504 30G 83 Linux
Disque /dev/sdb : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Disk model: WDC WD10EZEX-00R
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x000d6652
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sdb1 2048 314574847 314572800 150G 83 Linux
/dev/sdb2 314574848 1953523711 1638948864 781,5G 83 Linux
Disque /dev/sdc : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Disk model: TOSHIBA HDWD110
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x461b6d16
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sdc1 2048 1953523711 1953521664 931,5G 83 Linux
Explication : / sur sda3 ; /home sur sda2 ; /home/dossier-personnel sur sda1 ; /home/Affaires-perso sur sdb1 ; /home/Médiathèque sur sdb2 ; /home/Sauvegardes sur sdc1
Qui peut m'aider ? D'avance merci.
Dernière modification par Carroués (Le 19/07/2019, à 15:14)
Hors ligne
#2 Le 18/07/2019, à 13:10
- lucmars
Re : [Résolu] - Mon PC ne démarre plus !
Ben hd0 c'est /dev/sda.
Donnes nous le rapport smart sur sda, qu'on voit cela à plusieurs. Un boot-info serait aussi utile par ailleurs.
Gaulois Matter !
Hors ligne
#3 Le 18/07/2019, à 13:16
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
J'espère que celle-ci est la bonne commande :
sudo smartctl -s on -a /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.0.0-13-generic] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: PNY CS900 120GB SSD
Serial Number: PNY07190005170104C97
LU WWN Device Id: 5 f8db4c 071904c97
Firmware Version: CS900612
User Capacity: 120034123776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Thu Jul 18 11:14:47 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1352
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 210
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 26
170 Unknown_Attribute 0x0003 095 095 000 Pre-fail Always - 50
173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 196620
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 62
194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33)
218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 184
231 Temperature_Celsius 0x0013 100 100 000 Pre-fail Always - 99
241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 256
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 1338 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Hors ligne
#4 Le 18/07/2019, à 13:21
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
Hors ligne
#5 Le 18/07/2019, à 13:41
- Nasman
Re : [Résolu] - Mon PC ne démarre plus !
Il y a une référence à sdb8
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos8)/boot/grub. It also embeds following components:
mais sdb8 ne semble pas (ou plus) présent
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#6 Le 18/07/2019, à 13:42
- lucmars
Re : [Résolu] - Mon PC ne démarre plus !
Attribut 173 Wear Leveller Worst Case Erase Count The maximum number of erase operations performed on a single flash memory block. Il a une forte raw value, qu'en penser ? (source http://www.cropel.com/library/smart-att … list.aspx)
Ton boot-info
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos3)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos8)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> libparted MBR boot code is installed in the MBR of /dev/sdc.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdd and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp fat part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 19.04
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdd1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.04 20180907............................................ G....2....0............A20 gate n
Boot sector info: Syslinux looks at sector 3994848 of /dev/sdd1 for its
second stage. SYSLINUX is installed in the
/boot/syslinux directory. No errors found in the Boot
Parameter Block.
Operating System:
Boot files: /boot/grub/menu.lst /boot/grub/grub.cfg
/boot/syslinux/syslinux.cfg /EFI/BOOT/bootia32.efi
/EFI/BOOT/grubx64.efi /boot/grub/i386-pc/core.img
/boot/syslinux/ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Disk model: PNY CS900 120GB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 108,611,583 108,609,536 83 Linux
/dev/sda2 108,611,584 171,526,143 62,914,560 83 Linux
/dev/sda3 * 171,526,144 234,441,647 62,915,504 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: WDC WD10EZEX-00R
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 314,574,847 314,572,800 83 Linux
/dev/sdb2 314,574,848 1,953,523,711 1,638,948,864 83 Linux
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: TOSHIBA HDWD110
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 1,953,523,711 1,953,521,664 83 Linux
Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 7.5 GiB, 8019509248 bytes, 15663104 sectors
Disk model: USB DISK 2.0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 * 2,048 15,663,103 15,661,056 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 2019-04-16-19-19-59-00 iso9660 Ubuntu 19.04 amd64
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/loop9 squashfs
/dev/sda1 36f9d38c-2818-44d6-b0c9-fbd334cd2295 ext4 pavlov
/dev/sda2 c92be2a1-2edc-48dd-a798-9b76c73eb6f6 ext4 home
/dev/sda3 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4 ext4 root
/dev/sdb1 cfdb88da-633a-4e7d-8930-cccf490dff5b ext4 Nos-Affaires
/dev/sdb2 f27a3038-0d62-4554-aaf4-5d1bb6d089a5 ext4 Mediatheque
/dev/sdc1 65d4dd02-c5c5-40c8-bafc-d9fa053a909b ext4 Sauvegardes
/dev/sdd1 9123-FF86 vfat MULTISYSTEM
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 18 10:34 ata-HL-DT-ST_DVDRAM_GH20NS15_K03864N5153 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 18 11:18 ata-PNY_CS900_120GB_SSD_PNY07190005170104C97 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 18 11:18 ata-PNY_CS900_120GB_SSD_PNY07190005170104C97-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 18 11:18 ata-PNY_CS900_120GB_SSD_PNY07190005170104C97-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 18 11:18 ata-PNY_CS900_120GB_SSD_PNY07190005170104C97-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Jul 18 11:18 ata-TOSHIBA_HDWD110_46KELG4FS -> ../../sdc
lrwxrwxrwx 1 root root 10 Jul 18 11:18 ata-TOSHIBA_HDWD110_46KELG4FS-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Jul 18 11:18 ata-WDC_WD10EZEX-00RKKA0_WD-WCC1S0277079 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 18 11:18 ata-WDC_WD10EZEX-00RKKA0_WD-WCC1S0277079-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jul 18 11:18 ata-WDC_WD10EZEX-00RKKA0_WD-WCC1S0277079-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 Jul 18 10:34 usb-Generic_STORAGE_DEVICE_000000009602-0:0 -> ../../sde
lrwxrwxrwx 1 root root 9 Jul 18 10:34 usb-Generic_STORAGE_DEVICE_000000009602-0:1 -> ../../sdf
lrwxrwxrwx 1 root root 9 Jul 18 10:34 usb-Generic_STORAGE_DEVICE_000000009602-0:2 -> ../../sdg
lrwxrwxrwx 1 root root 9 Jul 18 10:34 usb-Generic_STORAGE_DEVICE_000000009602-0:3 -> ../../sdh
lrwxrwxrwx 1 root root 9 Jul 18 11:18 usb-_USB_DISK_2.0_078B1A552978-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 10 Jul 18 11:18 usb-_USB_DISK_2.0_078B1A552978-0:0-part1 -> ../../sdd1
lrwxrwxrwx 1 root root 9 Jul 18 11:18 wwn-0x5000039fe9c62e1b -> ../../sdc
lrwxrwxrwx 1 root root 10 Jul 18 11:18 wwn-0x5000039fe9c62e1b-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Jul 18 10:34 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 18 11:18 wwn-0x50014ee2073a0529 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 18 11:18 wwn-0x50014ee2073a0529-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jul 18 11:18 wwn-0x50014ee2073a0529-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 Jul 18 11:18 wwn-0x5f8db4c071904c97 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 18 11:18 wwn-0x5f8db4c071904c97-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 18 11:18 wwn-0x5f8db4c071904c97-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 18 11:18 wwn-0x5f8db4c071904c97-part3 -> ../../sda3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/fuse /run/user/999/doc fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/loop0 /cdrom iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop1 /rofs squashfs (ro,noatime)
/dev/sdd1 /isodevice vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${initrdfail}" = 2 ]; then
set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
set next_entry="${prev_entry}"
set prev_entry=
save_env prev_entry
if [ "${next_entry}" ]; then
set initrdfail=2
fi
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function initrdfail {
if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
if [ -z "${initrdfail}" ]; then
set initrdfail=1
if [ -n "${boot_once}" ]; then
set prev_entry="${default}"
save_env prev_entry
fi
fi
save_env initrdfail
fi; fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
else
search --no-floppy --fs-uuid --set=root 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 cfdb88da-633a-4e7d-8930-cccf490dff5b
else
search --no-floppy --fs-uuid --set=root cfdb88da-633a-4e7d-8930-cccf490dff5b
fi
insmod png
if background_image /Images/Fonds-ecran-etc/Grub/05.png; then
set color_normal=white/black
set color_highlight=green/yellow
else
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-558dc1e2-8d2a-4f05-bb3b-c100d1339dd4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
else
search --no-floppy --fs-uuid --set=root 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
fi
linux /boot/vmlinuz-5.0.0-20-generic root=UUID=558dc1e2-8d2a-4f05-bb3b-c100d1339dd4 ro
initrd /boot/initrd.img-5.0.0-20-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-558dc1e2-8d2a-4f05-bb3b-c100d1339dd4' {
menuentry 'Ubuntu, avec Linux 5.0.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-20-generic-advanced-558dc1e2-8d2a-4f05-bb3b-c100d1339dd4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
else
search --no-floppy --fs-uuid --set=root 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
fi
echo 'Chargement de Linux 5.0.0-20-generic…'
linux /boot/vmlinuz-5.0.0-20-generic root=UUID=558dc1e2-8d2a-4f05-bb3b-c100d1339dd4 ro
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-20-generic
}
menuentry 'Ubuntu, with Linux 5.0.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-20-generic-recovery-558dc1e2-8d2a-4f05-bb3b-c100d1339dd4' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
else
search --no-floppy --fs-uuid --set=root 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
fi
echo 'Chargement de Linux 5.0.0-20-generic…'
linux /boot/vmlinuz-5.0.0-20-generic root=UUID=558dc1e2-8d2a-4f05-bb3b-c100d1339dd4 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-20-generic
}
menuentry 'Ubuntu, avec Linux 5.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-19-generic-advanced-558dc1e2-8d2a-4f05-bb3b-c100d1339dd4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
else
search --no-floppy --fs-uuid --set=root 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
fi
echo 'Chargement de Linux 5.0.0-19-generic…'
linux /boot/vmlinuz-5.0.0-19-generic root=UUID=558dc1e2-8d2a-4f05-bb3b-c100d1339dd4 ro
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-19-generic
}
menuentry 'Ubuntu, with Linux 5.0.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-19-generic-recovery-558dc1e2-8d2a-4f05-bb3b-c100d1339dd4' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
else
search --no-floppy --fs-uuid --set=root 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
fi
echo 'Chargement de Linux 5.0.0-19-generic…'
linux /boot/vmlinuz-5.0.0-19-generic root=UUID=558dc1e2-8d2a-4f05-bb3b-c100d1339dd4 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-19-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
else
search --no-floppy --fs-uuid --set=root 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
else
search --no-floppy --fs-uuid --set=root 558dc1e2-8d2a-4f05-bb3b-c100d1339dd4
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry “Ubuntu-18.10” {
set isofile=”/Isos/U18-10.iso”
loopback loop (hd0,3)$isofile
linux (loop)/casper/vmlinuz locale=fr_FR bootkbd=fr console-setup/layoutcode=fr iso-scan/filename=$isofile boot=casper file=/cdrom/preseed/ubuntu-gnome.seed noprompt splash
initrd (loop)/casper/initrd
}
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda3 during installation
UUID=558dc1e2-8d2a-4f05-bb3b-c100d1339dd4 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda2 during installation
UUID=c92be2a1-2edc-48dd-a798-9b76c73eb6f6 /home ext4 defaults 0 2
# /home/pavlov was on /dev/sda1 during installation
UUID=36f9d38c-2818-44d6-b0c9-fbd334cd2295 /home/pavlov ext4 defaults 0 2
# /home/pavlov/Nos-Affaires was on /dev/sdb1 during installation
UUID=cfdb88da-633a-4e7d-8930-cccf490dff5b /home/pavlov/Nos-Affaires ext4 defaults 0 2
# /home/pavlov/Nos-Affaires/Mediatheque was on /dev/sdb2 during installation
UUID=f27a3038-0d62-4554-aaf4-5d1bb6d089a5 /home/pavlov/Nos-Affaires/Mediatheque ext4 defaults 0 2
# /home/pavlov/Nos-Affaires/Sauvegardes was on /dev/sdc1 during installation
UUID=65d4dd02-c5c5-40c8-bafc-d9fa053a909b /home/pavlov/Nos-Affaires/Sauvegardes ext4 defaults 0 2
# swap was on /dev/sdb3 during installation
## UUID=14899b1d-2c9f-4c60-92e2-e4572a3074d0 none swap sw 0 0
# swap was on /dev/sdc2 during installation
## UUID=0cd07308-db34-40ef-ae79-476d54793093 none swap sw 0 0
none /tmp tmpfs mode=01777,noatime,nodev,nosuid 0 0
--------------------------------------------------------------------------------
=================== sda3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
84.203414917 = 90.412728320 boot/grub/grub.cfg 2
86.321094513 = 92.686569472 boot/grub/i386-pc/core.img 1
96.524703979 = 103.642611712 boot/vmlinuz-5.0.0-19-generic 1
92.743453979 = 99.582525440 boot/vmlinuz-5.0.0-20-generic 2
92.743453979 = 99.582525440 vmlinuz 2
96.524703979 = 103.642611712 vmlinuz.old 1
96.407222748 = 103.516467200 boot/initrd.img-5.0.0-19-generic 5
96.174594879 = 103.266684928 boot/initrd.img-5.0.0-20-generic 5
96.174594879 = 103.266684928 initrd.img 5
96.407222748 = 103.516467200 initrd.img.old 5
=========================== sdd1/boot/grub/menu.lst: ===========================
--------------------------------------------------------------------------------
# This is a sample menu.lst file. You should make some changes to it.
# The old install method of booting via the stage-files has been removed.
# Please install GRLDR boot strap code to MBR with the bootlace.com
# utility under DOS/Win9x or Linux.
timeout 30
default /default
#convert -resize 640x480 -colors 14 /media/multisystem/boot/splash/splash.png /media/multisystem/boot/splash/splash.xpm.gz
splashimage=/boot/splash/splash.xpm.gz
#color blue/green yellow/red white/magenta white/magenta
foreground=0033FF
background=FF3300
#http://diddy.boot-land.net/grub4dos/Grub4dos.htm
#http://www.boot-land.net/forums/index.php?showforum=66
#http://diddy.boot-land.net/grub4dos/files/syntax.htm
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#http://diddy.boot-land.net/grub4dos/files/syntax.htm
title Chainloader into GRUB 2
find --set-root /boot/grub/boot.img
chainloader /boot/grub/boot.img
boot
#title Chainloader into Syslinux
#map (hd0) (hd0)
#map (hd0) (hd0)
#chainloader (hd0,0)+1
#rootnoverify (hd0,0)
##Autre solution pour chainer Syslinux
##faire une copie du mbr de la clé USB
##dd if=/dev/sd?1 of=/media/multisystem/syslinux.mbr bs=512 count=1
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#map (hd0) (hd0)
#map (hd0) (hd0)
#map --rehook
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#chainloader /syslinux.mbr
##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root /boot/syslinux/ldlinux.sys
#chainloader /boot/syslinux/ldlinux.sys
##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /boot/syslinux/redir.img
#kernel /boot/syslinux/memdisk
#initrd /boot/syslinux/redir.img
#http://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/
title FreeDos
kernel /boot/syslinux/memdisk
initrd /boot/img/fdboot.img
title find and load NTLDR of Windows NT/2K/XP
fallback 1
find --set-root --ignore-floppies --ignore-cd /ntldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /ntldr
chainloader /ntldr
savedefault --wait=2
title find and load BOOTMGR of Windows VISTA/SEVEN
fallback 2
find --set-root --ignore-floppies --ignore-cd /bootmgr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /bootmgr
chainloader /bootmgr
savedefault --wait=2
title find and load CMLDR, the Recovery Console of Windows NT/2K/XP
fallback 3
find --set-root --ignore-floppies --ignore-cd /cmldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /cmldr
chainloader /cmldr
#####################################################################
# write string "cmdcons" to memory 0000:7C03 in 2 steps:
#####################################################################
# step 1. Write 4 chars "cmdc" at 0000:7C03
write 0x7C03 0x63646D63
# step 2. Write 3 chars "ons" and an ending null at 0000:7C07
write 0x7C07 0x00736E6F
savedefault --wait=2
title find and load IO.SYS of Windows 9x/Me
fallback 4
find --set-root /io.sys
chainloader /io.sys
savedefault --wait=2
title find and boot 0PE.ISO
fallback 5
find --set-root /0PE/0PE.ISO
map /0PE/0PE.ISO (0xff) || map --mem /0PE/0PE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2
title find and boot MicroPE.ISO
fallback 6
find --set-root /boot/MicroPE.ISO
map /boot/MicroPE.ISO (0xff) || map --mem /boot/MicroPE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2
title find and boot ubcd.iso
fallback 8
find --set-root /ubcd.iso
map /ubcd.iso (0xff) || map --mem /ubcd.iso (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2
title commandline
commandline
title reboot
reboot
title halt
halt
--------------------------------------------------------------------------------
=========================== sdd1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#insmod gpt
#insmod pc
#insmod gfxmenu
#
#insmod videotest
insmod tga
insmod png
insmod gfxterm
insmod lspci
#insmod vbeinfo
insmod vbe
insmod ntfs
insmod chain
insmod biosdisk
insmod font
#http://grub.enbug.org/ThemeFormat
#http://grub.gibibit.com/Theme_format#colors
#http://code.google.com/p/burg/wiki/InstallUbuntu
#http://code.google.com/p/burg/downloads/list
#http://ubuntuforums.org/showthread.php?t=1195275
#pour acces a grub2 du bootloader principal modifier dans fichier: /etc/default/grub
#GRUB_HIDDEN_TIMEOUT=10 #0 par defaut
#GRUB_HIDDEN_TIMEOUT_QUIET=false #true d'origine
#sudo update-grub
#echo -n "Press ESC to see the menu... "
#if sleep --verbose --interruptible 5 ; then
#set timeout=0
#fi
set default=0
set timeout=30
set fallback=1
search --no-floppy --fs-uuid --set=root 9123-FF86
set root=${root}
#http://grub.enbug.org/gfxterm
if loadfont /boot/polices/unicode.pf2 ; then
set gfxmode=640x480
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if background_image /boot/splash/splash.png ; then
#text no sel/fond ecran
set color_normal=white/black #1
#text sel/fond ecran sel
set color_highlight=green/white #1
else
set menu_color_normal=white/black #2
set menu_color_highlight=green/white #2
set color_normal=white/magenta #2
set color_highlight=green/white #2
fi
#
#
#Pour activer le thème graphique multisystem décommentez les 4 lignes ci-dessous
#set gfxmode=640x480
#set theme=($root)/boot/grub/themes/multisystem/theme.txt
#export theme
#loadfont /boot/grub/themes/multisystem/fonts/Helvetica-8.pf2
#
#
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|13-07-2019-16:16:43-638621437|ubuntu-19.04-desktop-amd64.iso|multisystem-ubuntu|2000Mio|
menuentry "ubuntu-19.04-desktop-amd64.iso" {
search --set -f "/ubuntu-19.04-desktop-amd64.iso"
loopback loop "/ubuntu-19.04-desktop-amd64.iso"
linux (loop)/casper/vmlinuz root=UUID=9123-FF86 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/ubuntu-19.04-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd
}
#MULTISYSTEM_MENU_FIN|13-07-2019-16:16:43-638621437|ubuntu-19.04-desktop-amd64.iso|multisystem-ubuntu|2000Mio|
#MULTISYSTEM_MENU_DEBUT|13-07-2019-16:08:25-408934988|ubuntu-18.04-desktop-amd64.iso|multisystem-ubuntu|1832Mio|
menuentry "ubuntu-18.04-desktop-amd64.iso" {
search --set -f "/ubuntu-18.04-desktop-amd64.iso"
loopback loop "/ubuntu-18.04-desktop-amd64.iso"
linux (loop)/casper/vmlinuz root=UUID=9123-FF86 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/ubuntu-18.04-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|13-07-2019-16:08:25-408934988|ubuntu-18.04-desktop-amd64.iso|multisystem-ubuntu|1832Mio|
#MULTISYSTEM_MENU_DEBUT|13-07-2019-16:42:40-314732986|gparted-live-1.0.0-3-amd64.iso|multisystem-gparted|333Mio|
menuentry "gparted-live-1.0.0-3-amd64.iso" {
search --set -f "/gparted-live-1.0.0-3-amd64.iso"
loopback loop "/gparted-live-1.0.0-3-amd64.iso"
linux (loop)/live/vmlinuz toram=filesystem.squashfs findiso=/gparted-live-1.0.0-3-amd64.iso boot=live union=overlay username=user config components quiet noswap noeject vga=791 ip= nosplash
initrd (loop)/live/initrd.img
}
#MULTISYSTEM_MENU_FIN|13-07-2019-16:42:40-314732986|gparted-live-1.0.0-3-amd64.iso|multisystem-gparted|333Mio|
#MULTISYSTEM_MENU_DEBUT|28-03-2019-00:45:13-614088577|gparted-live-0.33.0-2-amd64.iso|multisystem-gparted|330Mio|
menuentry "gparted-live-0.33.0-2-amd64.iso" {
search --set -f "/gparted-live-0.33.0-2-amd64.iso"
loopback loop "/gparted-live-0.33.0-2-amd64.iso"
linux (loop)/live/vmlinuz toram=filesystem.squashfs findiso=/gparted-live-0.33.0-2-amd64.iso boot=live union=overlay username=user config components quiet noswap noeject vga=791 ip= nosplash
initrd (loop)/live/initrd.img
}
#MULTISYSTEM_MENU_FIN|28-03-2019-00:45:13-614088577|gparted-live-0.33.0-2-amd64.iso|multisystem-gparted|330Mio|
#MULTISYSTEM_MENU_DEBUT|28-03-2019-23:50:22-692199184|antiX-17.4_x64-full.iso|multisystem-antix|952Mio|
menuentry "antiX" {
search --set -f "/antiX-17.4_x64-full.iso"
loopback loop "/antiX-17.4_x64-full.iso"
linux (loop)/antiX/vmlinuz fromhd=UUID=9123-FF86 fromiso=/antiX-17.4_x64-full.iso
initrd (loop)/antiX/initrd.gz
}
#MULTISYSTEM_MENU_FIN|28-03-2019-23:50:22-692199184|antiX-17.4_x64-full.iso|multisystem-antix|952Mio|
#MULTISYSTEM_MENU_DEBUT|28-03-2019-23:53:02-554533303|xubuntu-18.04.2-desktop-amd64.iso|multisystem-xubuntu|1406Mio|
menuentry "xubuntu-18.04.2-desktop-amd64.iso" {
search --set -f "/xubuntu-18.04.2-desktop-amd64.iso"
loopback loop "/xubuntu-18.04.2-desktop-amd64.iso"
linux (loop)/casper/vmlinuz root=UUID=9123-FF86 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/xubuntu-18.04.2-desktop-amd64.iso boot=casper file=/cdrom/preseed/xubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd
}
#MULTISYSTEM_MENU_FIN|28-03-2019-23:53:02-554533303|xubuntu-18.04.2-desktop-amd64.iso|multisystem-xubuntu|1406Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
menuentry "______________Grub4Dos______________" {
echo
}
#http://grub4dos.sourceforge.net/
#http://grub4dos.sourceforge.net/wiki/index.php/Grub4dos_tutorial
menuentry "Grub4Dos" {
linux /boot/grub.exe --config-file=/boot/grub/menu.lst
}
menuentry "______________Syslinux______________" {
echo
}
#solution tordue, mais qui passe partout ...
#menuentry "Syslinux" {
#search --set -f /boot/syslinux/redir.img
# linux16 /boot/syslinux/memdisk
# initrd16 /boot/syslinux/redir.img
#}
#http://syslinux.zytor.com
menuentry "Syslinux" {
search --set -f "/boot/syslinux/ldlinux.sys"
drivemap -s (hd0) $root
chainloader +1
}
#Autre solution pour chainer Syslinux via une copie du mbr
#dd if=/dev/sd?1 of=/media/multisystem/boot/img/syslinux.mbr bs=512 count=1
#menuentry "Syslinux" {
#search --set -f "/boot/img/syslinux.mbr"
#drivemap -s (hd0) $root
#chainloader /boot/img/syslinux.mbr
#}
menuentry "______________UTIL______________" {
echo
}
## for debugging set debug=efi
#menuentry "0-testfakebios" {
# hexdump -s 0xc0000 (mem)
# fakebios
# hexdump -s 0xc0000 (mem)
## deliberate error to get wait for key
# xxx
#}
#How to test GRUB 2 on Macbook
#http://grub.enbug.org/TestingOnMacbook
#
#http://wiki.gentoo.org/wiki/GRUB2
#
#menuentry "Windows 7 BIOS/MBR" {
# insmod part_msdos
# insmod ntldr
# insmod ntfs
# ntldr (hd0,msdos1)/bootmgr
#}
#menuentry "Windows XP BIOS/MBR" {
# insmod part_msdos
# insmod ntldr
# insmod ntfs
# ntldr (hd0,msdos1)/ntldr
#}
#
#chainer un autre grub
#menuentry "grub.cfg auf /dev/sdb1" {
# configfile (hd1,1)/boot/grub/grub.cfg
#}
#menuentry "Chain other configfile" {
#configfile /boot/grub/grub-xxx.cfg
#}
#
#menuentry "Return default menu" {
#chainloader /boot/grub/boot.img
#}
#chainer win ou autre OS
#menuentry "Chainer UUID de la partition" {
#insmod=ntfs
#set root=(hd0,1)
#search --no-floppy --fs-uuid --set=root xxx-xxx
# drivemap -s (hd0) $root
# chainloader +1
#}
#Booter une iso avec memdisk
#menuentry "FreeBSD" {
# search --set -f "/FreeBSD-10.2-RELEASE-amd64-bootonly.iso"
# linux16 /boot/syslinux/memdisk iso raw
# initrd16 /FreeBSD-10.2-RELEASE-amd64-bootonly.iso
#}
#Booter une iso avec loopback.cfg
#menuentry "TITLE" {
# iso_path=/path.iso
# export iso_path
# search --set=root --file $iso_path
# loopback loop $iso_path
# root=(loop)
# configfile /boot/grub/loopback.cfg
# loopback --delete loop
#}
#http://www.plop.at/en/bootmanagerdl.html
menuentry "PLoP Boot Manager" {
linux16 /boot/img/plpbt
}
#http://www.supergrubdisk.org/
#http://developer.berlios.de/project/showfiles.php?group_id=10921
#SG2D (Floppy, CD & USB in one)
#super_grub_disk_hybrid-1.98s1.iso
menuentry "Super Grub2 Disk" {
search --set -f /boot/img/sgdh.iso
linux16 /boot/syslinux/memdisk
initrd16 /boot/img/sgdh.iso
}
menuentry "Super Grub Disk" {
search --set -f /boot/img/sgdfr.img
linux16 /boot/syslinux/memdisk
initrd16 /boot/img/sgdfr.img
}
menuentry "Smart Boot Manager" {
search --set -f /boot/img/sbootmgr.dsk
linux16 /boot/syslinux/memdisk
initrd16 /boot/img/sbootmgr.dsk
}
#Site: http://boot.kernel.org/index.html
#Téléchargement: http://boot.kernel.org/gpxe_images/gpxe.lkrn
menuentry "BKO (boot.kernel.org)" {
search --set -f /boot/img/gpxe.lkrn
linux16 /boot/img/gpxe.lkrn
}
#http://www.memtest.org/#downiso
menuentry "memtest86+" {
linux16 /boot/img/memtest86+.bin
}
menuentry "vbeinfo" {
vbeinfo
read
}
menuentry "lspci" {
lspci
read
}
menuentry "gfxpayload 640x480" {
set gfxpayload=640x480
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 800x600" {
set gfxpayload=800x600
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1024x768" {
set gfxpayload=1024x768
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1280x1024" {
set gfxpayload=1280x1024
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "Reboot" {
insmod reboot
reboot
}
--------------------------------------------------------------------------------
======================= sdd1/boot/syslinux/syslinux.cfg: =======================
--------------------------------------------------------------------------------
#http://www.syslinux.org/wiki/index.php?title=SYSLINUX#UI_module_options...
#default /boot/syslinux/vesamenu.c32
UI /boot/syslinux/vesamenu.c32
prompt 0
timeout 40
ontimeout 0
MENU TITLE MultiSystem LiveUSB
MENU DEFAULT 0
MENU BACKGROUND /boot/splash/splash.png
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
label 0
MENU LABEL PLoP Boot Manager
KERNEL /boot/img/plpbt
label 1
MENU LABEL Grub2
kernel /boot/syslinux/chain.c32 file=/boot/grub/boot.img
label 2
MENU LABEL Grub4Dos
kernel /boot/grub.exe
LABEL 3
MENU LABEL Hardware Detection Tool
KERNEL /boot/syslinux/hdt.c32
#Exemple pour booter un iso avec version recente de memdisk
#label 4
#MENU LABEL boot iso
#KERNEL /boot/syslinux/memdisk
#APPEND iso raw initrd=/g4u.iso
#LABEL 5
#KERNEL /boot/syslinux/memdisk
#APPEND initrd=freebsd.img floppy
#LABEL 6
#MENU LABEL Chainer win
#KERNEL /boot/syslinux/chain.c32 ntldr=/ntldr
#LABEL 7
#MENU LABEL Chainer partition 2
#kernel /boot/syslinux/chain.c32
#append hd0 2
--------------------------------------------------------------------------------
=================== sdd1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/menu.lst 1
?? = ?? boot/grub/grub.cfg 1
?? = ?? boot/grub/i386-pc/core.img 1
================= sdd1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? boot/syslinux/syslinux.cfg 1
?? = ?? boot/syslinux/ldlinux.sys 1
?? = ?? boot/syslinux/cat.c32 1
?? = ?? boot/syslinux/chain.c32 1
?? = ?? boot/syslinux/cmd.c32 1
?? = ?? boot/syslinux/cmenu.c32 1
?? = ?? boot/syslinux/config.c32 1
?? = ?? boot/syslinux/cptime.c32 1
?? = ?? boot/syslinux/cpu.c32 1
?? = ?? boot/syslinux/cpuid.c32 1
?? = ?? boot/syslinux/cpuidtest.c32 1
?? = ?? boot/syslinux/debug.c32 1
?? = ?? boot/syslinux/dhcp.c32 1
?? = ?? boot/syslinux/dir.c32 1
?? = ?? boot/syslinux/disk.c32 1
?? = ?? boot/syslinux/dmi.c32 1
?? = ?? boot/syslinux/dmitest.c32 1
?? = ?? boot/syslinux/elf.c32 1
?? = ?? boot/syslinux/ethersel.c32 1
?? = ?? boot/syslinux/gfxboot.c32 1
?? = ?? boot/syslinux/gpxecmd.c32 1
?? = ?? boot/syslinux/hdt.c32 1
?? = ?? boot/syslinux/hexdump.c32 1
?? = ?? boot/syslinux/host.c32 1
?? = ?? boot/syslinux/ifcpu.c32 1
?? = ?? boot/syslinux/ifcpu64.c32 1
?? = ?? boot/syslinux/ifmemdsk.c32 1
?? = ?? boot/syslinux/ifplop.c32 1
?? = ?? boot/syslinux/kbdmap.c32 1
?? = ?? boot/syslinux/kontron_wdt.c32 1
?? = ?? boot/syslinux/ldlinux.c32 1
?? = ?? boot/syslinux/lfs.c32 1
?? = ?? boot/syslinux/libcom32.c32 1
?? = ?? boot/syslinux/libgpl.c32 1
?? = ?? boot/syslinux/liblua.c32 1
?? = ?? boot/syslinux/libmenu.c32 1
?? = ?? boot/syslinux/libutil.c32 1
?? = ?? boot/syslinux/linux.c32 1
?? = ?? boot/syslinux/ls.c32 1
?? = ?? boot/syslinux/lua.c32 1
?? = ?? boot/syslinux/mboot.c32 1
?? = ?? boot/syslinux/meminfo.c32 1
?? = ?? boot/syslinux/menu.c32 1
?? = ?? boot/syslinux/pci.c32 1
?? = ?? boot/syslinux/pcitest.c32 1
?? = ?? boot/syslinux/pmload.c32 1
?? = ?? boot/syslinux/poweroff.c32 1
?? = ?? boot/syslinux/prdhcp.c32 1
?? = ?? boot/syslinux/pwd.c32 1
?? = ?? boot/syslinux/pxechn.c32 1
?? = ?? boot/syslinux/reboot.c32 1
?? = ?? boot/syslinux/rosh.c32 1
?? = ?? boot/syslinux/sanboot.c32 1
?? = ?? boot/syslinux/sdi.c32 1
?? = ?? boot/syslinux/sysdump.c32 1
?? = ?? boot/syslinux/syslinux.c32 1
?? = ?? boot/syslinux/vesa.c32 1
?? = ?? boot/syslinux/vesainfo.c32 1
?? = ?? boot/syslinux/vesamenu.c32 1
?? = ?? boot/syslinux/vpdtest.c32 1
?? = ?? boot/syslinux/whichsys.c32 1
?? = ?? boot/syslinux/zzjson.c32 1
============== sdd1: Version of COM32(R) files used by Syslinux: ===============
boot/syslinux/cat.c32 : not a COM32/COM32R module
boot/syslinux/chain.c32 : not a COM32/COM32R module
boot/syslinux/cmd.c32 : not a COM32/COM32R module
boot/syslinux/cmenu.c32 : not a COM32/COM32R module
boot/syslinux/config.c32 : not a COM32/COM32R module
boot/syslinux/cptime.c32 : not a COM32/COM32R module
boot/syslinux/cpu.c32 : not a COM32/COM32R module
boot/syslinux/cpuid.c32 : not a COM32/COM32R module
boot/syslinux/cpuidtest.c32 : not a COM32/COM32R module
boot/syslinux/debug.c32 : not a COM32/COM32R module
boot/syslinux/dhcp.c32 : not a COM32/COM32R module
boot/syslinux/dir.c32 : not a COM32/COM32R module
boot/syslinux/disk.c32 : not a COM32/COM32R module
boot/syslinux/dmi.c32 : not a COM32/COM32R module
boot/syslinux/dmitest.c32 : not a COM32/COM32R module
boot/syslinux/elf.c32 : not a COM32/COM32R module
boot/syslinux/ethersel.c32 : not a COM32/COM32R module
boot/syslinux/gfxboot.c32 : not a COM32/COM32R module
boot/syslinux/gpxecmd.c32 : not a COM32/COM32R module
boot/syslinux/hdt.c32 : not a COM32/COM32R module
boot/syslinux/hexdump.c32 : not a COM32/COM32R module
boot/syslinux/host.c32 : not a COM32/COM32R module
boot/syslinux/ifcpu.c32 : not a COM32/COM32R module
boot/syslinux/ifcpu64.c32 : not a COM32/COM32R module
boot/syslinux/ifmemdsk.c32 : not a COM32/COM32R module
boot/syslinux/ifplop.c32 : not a COM32/COM32R module
boot/syslinux/kbdmap.c32 : not a COM32/COM32R module
boot/syslinux/kontron_wdt.c32 : not a COM32/COM32R module
boot/syslinux/ldlinux.c32 : not a COM32/COM32R module
boot/syslinux/lfs.c32 : not a COM32/COM32R module
boot/syslinux/libcom32.c32 : not a COM32/COM32R module
boot/syslinux/libgpl.c32 : not a COM32/COM32R module
boot/syslinux/liblua.c32 : not a COM32/COM32R module
boot/syslinux/libmenu.c32 : not a COM32/COM32R module
boot/syslinux/libutil.c32 : not a COM32/COM32R module
boot/syslinux/linux.c32 : not a COM32/COM32R module
boot/syslinux/ls.c32 : not a COM32/COM32R module
boot/syslinux/lua.c32 : not a COM32/COM32R module
boot/syslinux/mboot.c32 : not a COM32/COM32R module
boot/syslinux/meminfo.c32 : not a COM32/COM32R module
boot/syslinux/menu.c32 : not a COM32/COM32R module
boot/syslinux/pci.c32 : not a COM32/COM32R module
boot/syslinux/pcitest.c32 : not a COM32/COM32R module
boot/syslinux/pmload.c32 : not a COM32/COM32R module
boot/syslinux/poweroff.c32 : not a COM32/COM32R module
boot/syslinux/prdhcp.c32 : not a COM32/COM32R module
boot/syslinux/pwd.c32 : not a COM32/COM32R module
boot/syslinux/pxechn.c32 : not a COM32/COM32R module
boot/syslinux/reboot.c32 : not a COM32/COM32R module
boot/syslinux/rosh.c32 : not a COM32/COM32R module
boot/syslinux/sanboot.c32 : not a COM32/COM32R module
boot/syslinux/sdi.c32 : not a COM32/COM32R module
boot/syslinux/sysdump.c32 : not a COM32/COM32R module
boot/syslinux/syslinux.c32 : not a COM32/COM32R module
boot/syslinux/vesa.c32 : not a COM32/COM32R module
boot/syslinux/vesainfo.c32 : not a COM32/COM32R module
boot/syslinux/vesamenu.c32 : not a COM32/COM32R module
boot/syslinux/vpdtest.c32 : not a COM32/COM32R module
boot/syslinux/whichsys.c32 : not a COM32/COM32R module
boot/syslinux/zzjson.c32 : not a COM32/COM32R module
========= Devices which don't seem to have a corresponding hard drive: =========
sde sdf sdg sdh
=============================== StdErr Messages: ===============================
File descriptor 10 (/proc/11103/mountinfo) leaked on lvs invocation. Parent PID 23661: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20190718_1118 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 19.04, disco, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 40 bits physical, 48 bits virtual
BOOT_IMAGE=(loop)/casper/vmlinuz root=UUID=9123-FF86 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/ubuntu-19.04-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type
=================== os-prober:
/dev/sda3:Ubuntu 19.04 (19.04):Ubuntu:linux
=================== blkid:
/dev/sdd1: LABEL_FATBOOT="multisystem" LABEL="MULTISYSTEM" UUID="9123-FF86" TYPE="vfat" PARTUUID="bca0a6bb-01"
/dev/loop0: UUID="2019-04-16-19-19-59-00" LABEL="Ubuntu 19.04 amd64" TYPE="iso9660" PTUUID="46f8e7bf" PTTYPE="dos"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: LABEL="pavlov" UUID="36f9d38c-2818-44d6-b0c9-fbd334cd2295" TYPE="ext4" PARTUUID="2a748e23-01"
/dev/sda2: LABEL="home" UUID="c92be2a1-2edc-48dd-a798-9b76c73eb6f6" TYPE="ext4" PARTUUID="2a748e23-02"
/dev/sda3: LABEL="root" UUID="558dc1e2-8d2a-4f05-bb3b-c100d1339dd4" TYPE="ext4" PARTUUID="2a748e23-03"
/dev/sdb1: LABEL="Nos-Affaires" UUID="cfdb88da-633a-4e7d-8930-cccf490dff5b" TYPE="ext4" PARTUUID="000d6652-01"
/dev/sdb2: LABEL="Mediatheque" UUID="f27a3038-0d62-4554-aaf4-5d1bb6d089a5" TYPE="ext4" PARTUUID="000d6652-02"
/dev/sdc1: LABEL="Sauvegardes" UUID="65d4dd02-c5c5-40c8-bafc-d9fa053a909b" TYPE="ext4" PARTUUID="461b6d16-01"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== No kernel in /isodevice/boot:
grub
grub.exe
img
kexec-loader.lst
multisystem.bs.save
polices
splash
syslinux
/isodevice/boot/grub/menu.lst detected
=================== sda3/etc/grub.d/ :
drwxr-xr-x 3 root root 4096 avril 19 15:11 grub.d
total 84
-rwxr-xr-x 1 root root 10627 févr. 5 16:05 00_header
-rwxr-xr-x 1 root root 6258 oct. 17 2018 05_debian_theme
-rwxr-xr-x 1 root root 13718 mars 11 21:48 10_linux
-rwxr-xr-x 1 root root 11497 mars 11 21:48 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 oct. 17 2018 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 17 2018 30_uefi-firmware
-rwxr-xr-x 1 root root 514 avril 4 10:13 40_custom
-rwxr-xr-x 1 root root 216 oct. 17 2018 41_custom
drwxr-xr-x 4 root root 4096 mars 31 19:29 backup
-rw-r--r-- 1 root root 483 oct. 17 2018 README
=================== sda3/etc/grub.d/40_custom :
menuentry “Ubuntu-18.10” {
set isofile=”/Isos/U18-10.iso”
loopback loop (hd0,3)$isofile
linux (loop)/casper/vmlinuz locale=fr_FR bootkbd=fr console-setup/layoutcode=fr iso-scan/filename=$isofile boot=casper file=/cdrom/preseed/ubuntu-gnome.seed noprompt splash
initrd (loop)/casper/initrd
}
=================== sda3/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT="0"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
#GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
export GRUB_MENU_PICTURE="/home/pavlov/Nos-Affaires/Images/Fonds-ecran-etc/Grub/05.png"
export GRUB_COLOR_NORMAL="white/black"
export GRUB_COLOR_HIGHLIGHT="green/yellow"
=================== sda3recordfail=1/grub/grubenv :
recordfail=1
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sdd1 : sdd, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-kernel, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /isodevice.
sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda2 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda2.
sda3 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda3.
sdb1 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb1.
sdb2 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb2.
sdc1 : sdc, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdc1.
sdd : not-GPT, BIOSboot-not-needed, has-correctEFI, liveusb, not-mmc, no-os, 2048 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:120GB:scsi:512:512:msdos:ATA PNY CS900 120GB:;
1:1049kB:55.6GB:55.6GB:ext4::;
2:55.6GB:87.8GB:32.2GB:ext4::;
3:87.8GB:120GB:32.2GB:ext4::boot;
BYT;
/dev/sdb:1000GB:scsi:512:4096:msdos:ATA WDC WD10EZEX-00R:;
1:1049kB:161GB:161GB:ext4::;
2:161GB:1000GB:839GB:ext4::;
BYT;
/dev/sdc:1000GB:scsi:512:4096:msdos:ATA TOSHIBA HDWD110:;
1:1049kB:1000GB:1000GB:ext4::;
BYT;
/dev/sdd:8020MB:scsi:512:512:msdos: USB DISK 2.0:;
1:1049kB:8020MB:8018MB:fat32::boot;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop iso9660 2G Ubuntu 19.04 amd64
loop1 loop squashfs 1,9G
loop2 loop squashfs 89,3M
loop3 loop squashfs 53,7M
loop4 loop squashfs 151M
loop5 loop squashfs 4M
loop6 loop squashfs 14,8M
loop7 loop squashfs 1008K
loop8 loop squashfs 3,7M
loop9 loop squashfs 35,3M
sda disk 111,8G
sda1 part ext4 51,8G pavlov
sda2 part ext4 30G home
sda3 part ext4 30G root
sdb disk 931,5G
sdb1 part ext4 150G Nos-Affaires
sdb2 part ext4 781,5G Mediatheque
sdc disk 931,5G
sdc1 part ext4 931,5G Sauvegardes
sdd disk 7,5G
sdd1 part vfat 7,5G MULTISYSTEM
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 0 0 /cdrom
loop1 1 1 0 /rofs
loop2 1 1 0 /snap/core/6673
loop3 1 1 0 /snap/core18/941
loop4 1 1 0 /snap/gnome-3-28-1804/31
loop5 1 1 0 /snap/gnome-calculator/406
loop6 1 1 0 /snap/gnome-characters/254
loop7 1 1 0 /snap/gnome-logs/61
loop8 1 1 0 /snap/gnome-system-monitor/77
loop9 1 1 0 /snap/gtk-common-themes/1198
sda 0 0 0 running
sda1 0 0 0 /mnt/boot-sav/sda1
sda2 0 0 0 /mnt/boot-sav/sda2
sda3 0 0 0 /mnt/boot-sav/sda3
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb2 1 0 0 /mnt/boot-sav/sdb2
sdc 1 0 0 running
sdc1 1 0 0 /mnt/boot-sav/sdc1
sdd 1 0 1 running
sdd1 1 0 1 /isodevice
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4025248k,nr_inodes=1006312,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=816624k,mode=755)
/dev/sdd1 on /isodevice type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /cdrom type iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop1 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=35,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=22658)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=816620k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/fuse on /run/user/999/doc type fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_6673.snap on /snap/core/6673 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_941.snap on /snap/core18/941 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_31.snap on /snap/gnome-3-28-1804/31 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_406.snap on /snap/gnome-calculator/406 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_254.snap on /snap/gnome-characters/254 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_61.snap on /snap/gnome-logs/61 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_77.snap on /snap/gnome-system-monitor/77 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1198.snap on /snap/gtk-common-themes/1198 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime)
/dev/sda3 on /mnt/boot-sav/sda3 type ext4 (rw,relatime)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw,relatime,stripe=32745)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw,relatime,stripe=32748)
/dev/sdc1 on /mnt/boot-sav/sdc1 type ext4 (rw,relatime)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdd1 size slaves stat subsystem trace uevent
/sys/block/sde (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdf (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdg (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdh (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kmsg kvm lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdb2 sdc sdc1 sdd sdd1 sde sdf sdg sdh sg0 sg1 sg2 sg3 sg4 sg5 sg6 sg7 sg8 shm snapshot snd sr0 stderr stdin stdout udmabuf uhid uinput urandom userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdd1
00000000 eb 58 90 53 59 53 4c 49 4e 55 58 00 02 08 20 00 |.X.SYSLINUX... .|
00000010 02 00 00 00 00 f8 00 00 3e 00 f7 00 00 08 00 00 |........>.......|
00000020 00 f8 ee 00 a8 3b 00 00 00 00 00 00 02 00 00 00 |.....;..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 86 ff 23 91 6d 75 6c 74 69 73 79 73 74 |..)..#.multisyst|
00000050 65 6d 46 41 54 33 32 20 20 20 fa fc 31 c9 8e d1 |emFAT32 ..1...|
00000060 bc 76 7b 52 06 57 1e 56 8e c1 b1 26 bf 78 7b f3 |.v{R.W.V...&.x{.|
00000070 a5 8e d9 bb 78 00 0f b4 37 0f a0 56 20 d2 78 1b |....x...7..V .x.|
00000080 31 c0 b1 06 89 3f 89 47 02 f3 64 a5 8a 0e 18 7c |1....?.G..d....||
00000090 88 4d f8 50 50 50 50 cd 13 eb 62 8b 55 aa 8b 75 |.M.PPPP...b.U..u|
000000a0 a8 c1 ee 04 01 f2 83 fa 4f 76 31 81 fa b2 07 73 |........Ov1....s|
000000b0 2b f6 45 b4 7f 75 25 38 4d b8 74 20 66 3d 21 47 |+.E..u%8M.t f=!G|
000000c0 50 54 75 10 80 7d b8 ed 75 0a 66 ff 75 ec 66 ff |PTu..}..u.f.u.f.|
000000d0 75 e8 eb 0f 51 51 66 ff 75 bc eb 07 51 51 66 ff |u...QQf.u...QQf.|
000000e0 36 1c 7c b4 08 e8 e9 00 72 13 20 e4 75 0f c1 ea |6.|.....r. .u...|
000000f0 08 42 89 16 1a 7c 83 e1 3f 89 0e 18 7c fb bb aa |.B...|..?...|...|
00000100 55 b4 41 e8 cb 00 72 10 81 fb 55 aa 75 0a f6 c1 |U.A...r...U.u...|
00000110 01 74 05 c6 06 46 7d 00 66 b8 e0 f4 3c 00 66 ba |.t...F}.f...<.f.|
00000120 00 00 00 00 bb 00 80 e8 0e 00 66 81 3e 1c 80 49 |..........f.>..I|
00000130 df 20 65 75 74 e9 f8 02 66 03 06 60 7b 66 13 16 |. eut...f..`{f..|
00000140 64 7b b9 10 00 eb 2b 66 52 66 50 06 53 6a 01 6a |d{....+fRfP.Sj.j|
00000150 10 89 e6 66 60 b4 42 e8 77 00 66 61 8d 64 10 72 |...f`.B.w.fa.d.r|
00000160 01 c3 66 60 31 c0 e8 68 00 66 61 e2 da c6 06 46 |..f`1..h.fa....F|
00000170 7d 2b 66 60 66 0f b7 36 18 7c 66 0f b7 3e 1a 7c |}+f`f..6.|f..>.||
00000180 66 f7 f6 31 c9 87 ca 66 f7 f7 66 3d ff 03 00 00 |f..1...f..f=....|
00000190 77 17 c0 e4 06 41 08 e1 88 c5 88 d6 b8 01 02 e8 |w....A..........|
000001a0 2f 00 66 61 72 01 c3 e2 c9 31 f6 8e d6 bc 68 7b |/.far....1....h{|
000001b0 8e de 66 8f 06 78 00 be da 7d ac 20 c0 74 09 b4 |..f..x...}. .t..|
000001c0 0e bb 07 00 cd 10 eb f2 31 c0 cd 16 cd 19 f4 eb |........1.......|
000001d0 fd 8a 16 74 7b 06 cd 13 07 c3 42 6f 6f 74 20 65 |...t{.....Boot e|
000001e0 72 72 6f 72 0d 0a 00 00 00 00 00 00 00 00 00 00 |rror............|
000001f0 00 00 00 00 00 00 00 00 fe 02 b2 3e 18 37 55 aa |...........>.7U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 798M 1.6M 796M 1% /run
/dev/sdd1 vfat 7.5G 6.8G 752M 91% /isodevice
/dev/loop0 iso9660 2.0G 2.0G 0 100% /cdrom
/dev/loop1 squashfs 1.9G 1.9G 0 100% /rofs
/cow overlay 3.9G 586M 3.4G 15% /
tmpfs tmpfs 3.9G 221M 3.7G 6% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 612K 3.9G 1% /tmp
tmpfs tmpfs 798M 60K 798M 1% /run/user/999
/dev/loop2 squashfs 90M 90M 0 100% /snap/core/6673
/dev/loop3 squashfs 54M 54M 0 100% /snap/core18/941
/dev/loop4 squashfs 152M 152M 0 100% /snap/gnome-3-28-1804/31
/dev/loop5 squashfs 4.2M 4.2M 0 100% /snap/gnome-calculator/406
/dev/loop6 squashfs 15M 15M 0 100% /snap/gnome-characters/254
/dev/loop7 squashfs 1.0M 1.0M 0 100% /snap/gnome-logs/61
/dev/loop8 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/77
/dev/loop9 squashfs 36M 36M 0 100% /snap/gtk-common-themes/1198
/dev/sda1 ext4 51G 4.7G 44G 10% /mnt/boot-sav/sda1
/dev/sda2 ext4 30G 45M 28G 1% /mnt/boot-sav/sda2
/dev/sda3 ext4 30G 11G 17G 40% /mnt/boot-sav/sda3
/dev/sdb1 ext4 148G 83G 58G 60% /mnt/boot-sav/sdb1
/dev/sdb2 ext4 770G 387G 344G 53% /mnt/boot-sav/sdb2
/dev/sdc1 ext4 917G 559G 312G 65% /mnt/boot-sav/sdc1
=================== fdisk -l:
Disk /dev/loop0: 2 GiB, 2097152000 bytes, 4096000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x46f8e7bf
Device Boot Start End Sectors Size Id Type
/dev/loop0p1 * 0 4095999 4096000 2G 0 Empty
/dev/loop0p2 4066772 4074259 7488 3.7M ef EFI (FAT-12/16/32)
Disk /dev/loop1: 1.9 GiB, 2027323392 bytes, 3959616 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 89.3 MiB, 93581312 bytes, 182776 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 53.7 MiB, 56315904 bytes, 109992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 151 MiB, 158343168 bytes, 309264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 4 MiB, 4218880 bytes, 8240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 14.8 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 1008 KiB, 1032192 bytes, 2016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Disk model: PNY CS900 120GB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x2a748e23
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 108611583 108609536 51.8G 83 Linux
/dev/sda2 108611584 171526143 62914560 30G 83 Linux
/dev/sda3 * 171526144 234441647 62915504 30G 83 Linux
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: WDC WD10EZEX-00R
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x000d6652
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 314574847 314572800 150G 83 Linux
/dev/sdb2 314574848 1953523711 1638948864 781.5G 83 Linux
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: TOSHIBA HDWD110
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x461b6d16
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 1953523711 1953521664 931.5G 83 Linux
Disk /dev/sdd: 7.5 GiB, 8019509248 bytes, 15663104 sectors
Disk model: USB DISK 2.0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xbca0a6bb
Device Boot Start End Sectors Size Id Type
/dev/sdd1 * 2048 15663103 15661056 7.5G b W95 FAT32
Disk /dev/loop8: 3.7 MiB, 3821568 bytes, 7464 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop9: 35.3 MiB, 37027840 bytes, 72320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda3 into the MBRs of all disks (except live-disks and removable disks without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA PNY CS900 120GB) !
Les fichiers de démarrage de [Ubuntu 19.04] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
Gaulois Matter !
Hors ligne
#7 Le 18/07/2019, à 13:55
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
@ Nasman
C'est peut-être bien une piste : avant le rajout il y a 3 mois du SSD, le boot était en effet sur sdb8.
Pourquoi il se serait remis à chercher là et surtout comment effacer cette ancienne référence ?
@ lucmars
Comme dit ci-dessus, je ne suis pas du tout à l'aise avec smartmontools ! J'attends plutôt des infos de la part du forum. Par ailleurs, ton lien ne fonctionne pas.
Hors ligne
#8 Le 18/07/2019, à 13:56
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
C'est bon pour le lien, c'était juste la parenthèse en trop !
Hors ligne
#9 Le 18/07/2019, à 13:59
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
@ lucmars : comment puis-je avoir une valeur aussi élevée sur un disque de seulement 3-4 mois ???
Hors ligne
#10 Le 18/07/2019, à 14:16
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
Et comment réparer ?
sudo grub-install /dev/sda3 ???
Hors ligne
#11 Le 18/07/2019, à 14:19
- lucmars
Re : [Résolu] - Mon PC ne démarre plus !
@ lucmars : comment puis-je avoir une valeur aussi élevée sur un disque de seulement 3-4 mois ???
Sais pas. C'est peut etre pas si dramatique, faut voir sur le net si la raw value est pertinente pour cet attribut.
Gaulois Matter !
Hors ligne
#12 Le 18/07/2019, à 14:44
- Nasman
Re : [Résolu] - Mon PC ne démarre plus !
Tu as plusieurs disques qui semblent relativement indépendants dans chacun des disques tu as :
- grub-pc dans le mbr
- core.img dans le "mbr gap" à la LBA=1
- core.img pointe sur la partitions système Linux où se trouve grub.cfg (excepté pour sdb où sdb8 est manquant)
Essaie de changer l'ordre de boot entre tes disques, peut être en échangeant deux disques pour tomber sur un système qui se lance.
On pourra alors rétablir les emplacement des grub.
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#13 Le 18/07/2019, à 16:31
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
@ Nasman :
J'ai tenté les modifications d'ordre de démarrage - dans le BIOS, c'est bien ce que tu voulais dire ?
Toujours pareil. (2 disques me donnent aucun résultat, le SSD donne le résultat indiqué en Post n° 1).
Hors ligne
#14 Le 18/07/2019, à 17:36
- lucmars
Re : [Résolu] - Mon PC ne démarre plus !
@ Nasman :
J'ai tenté les modifications d'ordre de démarrage - dans le BIOS, c'est bien ce que tu voulais dire ?
Toujours pareil. (2 disques me donnent aucun résultat, le SSD donne le résultat indiqué en Post n° 1).
Je pige pas la manip, ton systeme est sur sda et les autres disques servent pour les données, n'est-ce pas ?
Si oui, seul sda est bootable et apparemment le ssd déplait à grub.
J'ai pas trouvé plus d'info pour l'attribut 173
Gaulois Matter !
Hors ligne
#15 Le 18/07/2019, à 18:33
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
Ton système est sur sda et les autres disques servent pour les données, n'est-ce pas ?
C'est bien ça.
Hors ligne
#16 Le 18/07/2019, à 18:35
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
Le SSD déplaît à Grub… depuis quelques jours seulement. Pendant 3-4 mois, je n'ai eu aucun problème avec, je ne pige pas pourquoi du jour au lendemain ça ne fonctionne plus.
Hors ligne
#17 Le 18/07/2019, à 19:12
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
Je précise que cet après-midi j'ai tenté "sudo grub-install /dev/sda3" en passant par un chroot, rien n'y fait !
Hors ligne
#18 Le 18/07/2019, à 19:25
- lucmars
Re : [Résolu] - Mon PC ne démarre plus !
Ben oui, grub incrimine le ssd et l'attribut 173 affiche une grande valeur, ce qui trou le cul pour un ssd quasi-neuf.
Que faire ? auditer le ssd avec un autre logiciel (plutot sur windows du coup) ? Et bon pour quoi faire sinon a estimer que t'es tombé sur le mauvais cheval sinon qu'il y aurait qlq choses avec la 1904 qui boufferait certain ssd ?
Gaulois Matter !
Hors ligne
#19 Le 18/07/2019, à 21:08
- inbox
Re : [Résolu] - Mon PC ne démarre plus !
Salut,
Lorsque ton PC a eu du mal à démarrer, donne le retour de :
dmesg
A+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
En ligne
#20 Le 18/07/2019, à 22:09
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
@ inbox
Comment je lance cette commande alors que le PC ne démarre pas ? Ça fonctionne depuis un live USB ?
Hors ligne
#21 Le 18/07/2019, à 22:12
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
ubuntu@ubuntu:~$ dmesg
[ 0.000000] Linux version 5.0.0-13-generic (buildd@lcy01-amd64-020) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #14-Ubuntu SMP Mon Apr 15 14:59:14 UTC 2019 (Ubuntu 5.0.0-13.14-generic 5.0.6)
[ 0.000000] Command line: BOOT_IMAGE=(loop)/casper/vmlinuz root=UUID=9123-FF86 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/ubuntu-19.04-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffcffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cffddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffde000-0x00000000cfffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: MICRO-STAR INTERANTIONAL CO.,LTD MS-7367/MS-7367, BIOS V3.3 11/05/2007
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.591 MHz processor
[ 0.006990] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.006992] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.016889] AGP: No AGP bridge found
[ 0.016980] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.016986] MTRR default type: uncachable
[ 0.016987] MTRR fixed ranges enabled:
[ 0.016989] 00000-9FFFF write-back
[ 0.016990] A0000-EFFFF uncachable
[ 0.016991] F0000-FFFFF write-protect
[ 0.016992] MTRR variable ranges enabled:
[ 0.016994] 0 base 0000000000 mask FE00000000 write-back
[ 0.016996] 1 base 0200000000 mask FFE0000000 write-back
[ 0.016998] 2 base 0220000000 mask FFF0000000 write-back
[ 0.016999] 3 base 00D0000000 mask FFF0000000 uncachable
[ 0.017001] 4 base 00E0000000 mask FFE0000000 uncachable
[ 0.017002] 5 disabled
[ 0.017002] 6 disabled
[ 0.017003] 7 disabled
[ 0.017005] TOM2: 0000000230000000 aka 8960M
[ 0.017220] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.017284] total RAM covered: 3328M
[ 0.018290] Found optimal setting for mtrr clean up
[ 0.018292] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G
[ 0.018488] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.018496] last_pfn = 0xcffd0 max_arch_pfn = 0x400000000
[ 0.023848] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(____ptrval____)]
[ 0.033377] check: Scanning 1 areas for low memory corruption
[ 0.033381] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.033388] BRK [0xaf001000, 0xaf001fff] PGTABLE
[ 0.033392] BRK [0xaf002000, 0xaf002fff] PGTABLE
[ 0.033394] BRK [0xaf003000, 0xaf003fff] PGTABLE
[ 0.033455] BRK [0xaf004000, 0xaf004fff] PGTABLE
[ 0.033459] BRK [0xaf005000, 0xaf005fff] PGTABLE
[ 0.033834] BRK [0xaf006000, 0xaf006fff] PGTABLE
[ 0.033856] BRK [0xaf007000, 0xaf007fff] PGTABLE
[ 0.033877] BRK [0xaf008000, 0xaf008fff] PGTABLE
[ 0.033899] BRK [0xaf009000, 0xaf009fff] PGTABLE
[ 0.033951] RAMDISK: [mem 0x32f3f000-0x35796fff]
[ 0.033969] ACPI: Early table checksum verification disabled
[ 0.034314] ACPI: RSDP 0x00000000000F9B10 000014 (v00 ACPIAM)
[ 0.034318] ACPI: RSDT 0x00000000CFFD0000 000038 (v01 110507 RSDT1635 20071105 MSFT 00000097)
[ 0.034325] ACPI: FACP 0x00000000CFFD0200 000084 (v02 110507 FACP1635 20071105 MSFT 00000097)
[ 0.034333] ACPI: DSDT 0x00000000CFFD0430 004271 (v01 1ADNC 1ADNCB33 00000B33 INTL 20051117)
[ 0.034338] ACPI: FACS 0x00000000CFFDE000 000040
[ 0.034341] ACPI: APIC 0x00000000CFFD0390 00005C (v01 110507 APIC1635 20071105 MSFT 00000097)
[ 0.034345] ACPI: MCFG 0x00000000CFFD03F0 00003C (v01 110507 OEMMCFG 20071105 MSFT 00000097)
[ 0.034349] ACPI: OEMB 0x00000000CFFDE040 000071 (v01 110507 OEMB1635 20071105 MSFT 00000097)
[ 0.034353] ACPI: HPET 0x00000000CFFD46B0 000038 (v01 110507 OEMHPET 20071105 MSFT 00000097)
[ 0.034373] ACPI: Local APIC address 0xfee00000
[ 0.034529] Scanning NUMA topology in Northbridge 24
[ 0.034584] No NUMA configuration found
[ 0.034586] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[ 0.034597] NODE_DATA(0) allocated [mem 0x22ffd1000-0x22fffbfff]
[ 0.035128] Zone ranges:
[ 0.035129] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.035131] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.035132] Normal [mem 0x0000000100000000-0x000000022fffffff]
[ 0.035133] Device empty
[ 0.035135] Movable zone start for each node
[ 0.035140] Early memory node ranges
[ 0.035141] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.035142] node 0: [mem 0x0000000000100000-0x00000000cffcffff]
[ 0.035144] node 0: [mem 0x0000000100000000-0x000000022fffffff]
[ 0.035153] Zeroed struct page in unavailable ranges: 146 pages
[ 0.035155] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[ 0.035157] On node 0 totalpages: 2097006
[ 0.035158] DMA zone: 64 pages used for memmap
[ 0.035159] DMA zone: 21 pages reserved
[ 0.035161] DMA zone: 3998 pages, LIFO batch:0
[ 0.035354] DMA32 zone: 13248 pages used for memmap
[ 0.035355] DMA32 zone: 847824 pages, LIFO batch:63
[ 0.076414] Normal zone: 19456 pages used for memmap
[ 0.076416] Normal zone: 1245184 pages, LIFO batch:63
[ 0.135006] Detected use of extended apic ids on hypertransport bus
[ 0.135025] ACPI: PM-Timer IO Port: 0x808
[ 0.135028] ACPI: Local APIC address 0xfee00000
[ 0.135045] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.135048] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.135050] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.135052] ACPI: IRQ0 used by override.
[ 0.135053] ACPI: IRQ9 used by override.
[ 0.135056] Using ACPI (MADT) for SMP configuration information
[ 0.135058] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.135063] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.135080] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.135082] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.135083] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.135084] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.135086] PM: Registered nosave memory: [mem 0xcffd0000-0xcffddfff]
[ 0.135087] PM: Registered nosave memory: [mem 0xcffde000-0xcfffffff]
[ 0.135087] PM: Registered nosave memory: [mem 0xd0000000-0xffefffff]
[ 0.135088] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.135091] [mem 0xd0000000-0xffefffff] available for PCI devices
[ 0.135092] Booting paravirtualized kernel on bare hardware
[ 0.135096] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.135118] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[ 0.135128] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.136745] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u1048576
[ 0.136754] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
[ 0.136755] pcpu-alloc: [0] 0 1
[ 0.136790] Built 1 zonelists, mobility grouping on. Total pages: 2064217
[ 0.136791] Policy zone: Normal
[ 0.136794] Kernel command line: BOOT_IMAGE=(loop)/casper/vmlinuz root=UUID=9123-FF86 maybe-ubiquity debian-installer/language=fr keyboard-configuration/layoutcode=fr keyboard-configuration/variantcode=oss iso-scan/filename=/ubuntu-19.04-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
[ 0.178434] AGP: Checking aperture...
[ 0.188327] AGP: No AGP bridge found
[ 0.188330] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
[ 0.188332] Aperture pointing to e820 RAM. Ignoring.
[ 0.188333] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.188333] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.188334] AGP: This costs you 64MB of RAM
[ 0.188338] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.188341] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.266102] Memory: 8050460K/8388024K available (14339K kernel code, 2334K rwdata, 4292K rodata, 2576K init, 5204K bss, 337564K reserved, 0K cma-reserved)
[ 0.266355] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.266366] ftrace: allocating 41532 entries in 163 pages
[ 0.293940] rcu: Hierarchical RCU implementation.
[ 0.293942] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.293944] Tasks RCU enabled.
[ 0.293945] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.293946] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.299403] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.299741] spurious 8259A interrupt: IRQ7.
[ 0.302421] Console: colour VGA+ 80x25
[ 0.302428] printk: console [tty0] enabled
[ 0.302459] ACPI: Core revision 20181213
[ 0.302690] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.302705] hpet clockevent registered
[ 0.302712] APIC: Switch to symmetric I/O mode setup
[ 0.303207] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.322711] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.322730] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.18 BogoMIPS (lpj=8778364)
[ 0.322733] pid_max: default: 32768 minimum: 301
[ 0.322789] LSM: Security Framework initializing
[ 0.322807] Yama: becoming mindful.
[ 0.322835] AppArmor: AppArmor initialized
[ 0.327141] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.329332] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.329425] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.329500] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.329841] mce: CPU supports 5 MCE banks
[ 0.329852] LVT offset 0 assigned for vector 0xf9
[ 0.329855] process: using AMD E400 aware idle routine
[ 0.329856] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.329858] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.329861] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 0.329905] Spectre V2 : Mitigation: Full generic retpoline
[ 0.329906] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.330058] Freeing SMP alternatives memory: 36K
[ 0.334712] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (family: 0xf, model: 0x6b, stepping: 0x2)
[ 0.334712] Performance Events: AMD PMU driver.
[ 0.334712] ... version: 0
[ 0.334712] ... bit width: 48
[ 0.334712] ... generic registers: 4
[ 0.334712] ... value mask: 0000ffffffffffff
[ 0.334712] ... max period: 00007fffffffffff
[ 0.334712] ... fixed-purpose events: 0
[ 0.334712] ... event mask: 000000000000000f
[ 0.334712] rcu: Hierarchical SRCU implementation.
[ 0.334712] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.334712] smp: Bringing up secondary CPUs ...
[ 0.334712] x86: Booting SMP configuration:
[ 0.334712] .... node #0, CPUs: #1
[ 0.410818] smp: Brought up 1 node, 2 CPUs
[ 0.410818] smpboot: Max logical packages: 1
[ 0.410818] smpboot: Total of 2 processors activated (8778.70 BogoMIPS)
[ 0.411886] devtmpfs: initialized
[ 0.411886] x86/mm: Memory block size: 128MB
[ 0.412248] PM: Registering ACPI NVS region [mem 0xcffde000-0xcfffffff] (139264 bytes)
[ 0.412259] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.412259] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.412259] pinctrl core: initialized pinctrl subsystem
[ 0.412259] RTC time: 14:23:52, date: 2019-07-18
[ 0.412259] NET: Registered protocol family 16
[ 0.414734] audit: initializing netlink subsys (disabled)
[ 0.414762] audit: type=2000 audit(1563459832.112:1): state=initialized audit_enabled=0 res=1
[ 0.414935] EISA bus registered
[ 0.414949] cpuidle: using governor ladder
[ 0.414953] cpuidle: using governor menu
[ 0.414961] node 0 link 0: io port [1000, ffffff]
[ 0.414963] TOM: 00000000d0000000 aka 3328M
[ 0.414966] node 0 link 0: mmio [e0000000, efffffff]
[ 0.414969] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.414971] node 0 link 0: mmio [a0000, bffff]
[ 0.414972] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.414974] TOM2: 0000000230000000 aka 8960M
[ 0.414976] bus: [bus 00-ff] on node 0 link 0
[ 0.414977] bus: 00 [io 0x0000-0xffff]
[ 0.414978] bus: 00 [mem 0xd0000000-0xffffffff]
[ 0.414979] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.414980] bus: 00 [mem 0x230000000-0xfcffffffff]
[ 0.415133] ACPI: bus type PCI registered
[ 0.415135] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.415248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.415251] PCI: not using MMCONFIG
[ 0.415253] PCI: Using configuration type 1 for base access
[ 0.417661] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.417661] ACPI: Added _OSI(Module Device)
[ 0.417661] ACPI: Added _OSI(Processor Device)
[ 0.417661] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.417661] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.417661] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.417661] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.417661] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.424637] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.426411] ACPI: Interpreter enabled
[ 0.426446] ACPI: (supports S0 S1 S4 S5)
[ 0.426448] ACPI: Using IOAPIC for interrupt routing
[ 0.426505] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.428209] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.428232] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.428599] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.439384] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.439393] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.439977] PCI host bridge to bus 0000:00
[ 0.439980] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.439982] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.439984] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.439986] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.439987] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[ 0.439989] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.439991] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.440000] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
[ 0.440171] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
[ 0.440192] pci 0000:00:02.0: enabling Extended Tags
[ 0.440221] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.440372] pci 0000:00:07.0: [1002:7917] type 01 class 0x060400
[ 0.440392] pci 0000:00:07.0: enabling Extended Tags
[ 0.440420] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.440577] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[ 0.440601] pci 0000:00:12.0: reg 0x10: [io 0xc000-0xc007]
[ 0.440612] pci 0000:00:12.0: reg 0x14: [io 0xb000-0xb003]
[ 0.440623] pci 0000:00:12.0: reg 0x18: [io 0xa000-0xa007]
[ 0.440634] pci 0000:00:12.0: reg 0x1c: [io 0x9000-0x9003]
[ 0.440644] pci 0000:00:12.0: reg 0x20: [io 0x8000-0x800f]
[ 0.440655] pci 0000:00:12.0: reg 0x24: [mem 0xfe9ff800-0xfe9ffbff]
[ 0.440682] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.440842] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.440863] pci 0000:00:13.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.441066] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.441087] pci 0000:00:13.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.441286] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.441306] pci 0000:00:13.2: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.441507] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.441528] pci 0000:00:13.3: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.441735] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.441756] pci 0000:00:13.4: reg 0x10: [mem 0xfe9fa000-0xfe9fafff]
[ 0.441960] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.441985] pci 0000:00:13.5: reg 0x10: [mem 0xfe9ff000-0xfe9ff0ff]
[ 0.442079] pci 0000:00:13.5: supports D1 D2
[ 0.442081] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.442459] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.444082] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.451067] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.451088] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.451099] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.451109] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.451120] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.451130] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.451154] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.451155] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.451157] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.451158] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.451303] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.451332] pci 0000:00:14.2: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.451411] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.451560] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.451771] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.451960] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.452099] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.452231] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.452364] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.452558] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[ 0.452580] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.452592] pci 0000:01:00.0: reg 0x18: [mem 0xfeae0000-0xfeafffff 64bit]
[ 0.452600] pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.452614] pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.452620] pci 0000:01:00.0: enabling Extended Tags
[ 0.452665] pci 0000:01:00.0: supports D1 D2
[ 0.452743] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[ 0.452765] pci 0000:01:00.1: reg 0x10: [mem 0xfeabc000-0xfeabffff 64bit]
[ 0.452800] pci 0000:01:00.1: enabling Extended Tags
[ 0.452844] pci 0000:01:00.1: supports D1 D2
[ 0.452927] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.452931] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.452934] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.452938] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.452993] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.453021] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.453047] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.453077] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.453086] pci 0000:02:00.0: enabling Extended Tags
[ 0.453168] pci 0000:02:00.0: supports D1 D2
[ 0.453169] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.453262] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.453270] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.453273] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.453276] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.453291] pci_bus 0000:03: extended config space not accessible
[ 0.453367] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.453377] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.453379] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.453381] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.453383] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.453384] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
[ 0.453386] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.454779] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.454882] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.454983] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.455084] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.455186] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.455288] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.455390] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.455492] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.455763] SCSI subsystem initialized
[ 0.455763] libata version 3.00 loaded.
[ 0.455763] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.455763] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.455763] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.455763] vgaarb: loaded
[ 0.455763] ACPI: bus type USB registered
[ 0.455763] usbcore: registered new interface driver usbfs
[ 0.455763] usbcore: registered new interface driver hub
[ 0.455763] usbcore: registered new device driver usb
[ 0.455763] pps_core: LinuxPPS API ver. 1 registered
[ 0.455763] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.455763] PTP clock support registered
[ 0.455763] EDAC MC: Ver: 3.0.0
[ 0.455763] PCI: Using ACPI for IRQ routing
[ 0.467136] PCI: pci_cache_line_size set to 64 bytes
[ 0.467649] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.467651] e820: reserve RAM buffer [mem 0xcffd0000-0xcfffffff]
[ 0.467821] NetLabel: Initializing
[ 0.467822] NetLabel: domain hash size = 128
[ 0.467823] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.467844] NetLabel: unlabeled traffic allowed by default
[ 0.467874] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.467874] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.468960] clocksource: Switched to clocksource hpet
[ 0.491098] VFS: Disk quotas dquot_6.6.0
[ 0.491125] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.491325] AppArmor: AppArmor Filesystem Enabled
[ 0.491367] pnp: PnP ACPI init
[ 0.491583] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.492043] pnp 00:01: [dma 0 disabled]
[ 0.492153] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.492568] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.492570] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.492576] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.492888] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.492890] system 00:03: [io 0x040b] has been reserved
[ 0.492892] system 00:03: [io 0x04d6] has been reserved
[ 0.492894] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.492896] system 00:03: [io 0x0c14] has been reserved
[ 0.492898] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.492900] system 00:03: [io 0x0c52] has been reserved
[ 0.492902] system 00:03: [io 0x0c6c] has been reserved
[ 0.492904] system 00:03: [io 0x0c6f] has been reserved
[ 0.492906] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.492907] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.492909] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.492911] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.492913] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.492915] system 00:03: [io 0x0800-0x089f] has been reserved
[ 0.492917] system 00:03: [io 0x0b10-0x0b1f] has been reserved
[ 0.492919] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.492921] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.492923] system 00:03: [io 0xfe00-0xfefe] has been reserved
[ 0.492926] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.492928] system 00:03: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.492933] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.493023] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.493303] system 00:05: [io 0x0600-0x06df] has been reserved
[ 0.493305] system 00:05: [io 0x0ae0-0x0aef] has been reserved
[ 0.493310] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.493420] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.493425] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.493867] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.493869] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.493871] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.493873] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.493876] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.493881] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.494104] pnp: PnP ACPI: found 8 devices
[ 0.501884] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.501919] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.501922] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.501925] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.501928] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.501932] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.501934] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.501936] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.501942] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.501957] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.501959] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.501961] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.501962] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.501964] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window]
[ 0.501965] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.501967] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.501969] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.501971] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.501972] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.501974] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.501976] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.501978] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.501979] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.501981] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.501983] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff window]
[ 0.501984] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.502111] NET: Registered protocol family 2
[ 0.502442] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.502518] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.502900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.503489] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.503604] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.503692] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.503941] NET: Registered protocol family 1
[ 0.503950] NET: Registered protocol family 44
[ 0.534856] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6a6 took 30155 usecs
[ 0.562842] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6a6 took 27320 usecs
[ 0.582838] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6a6 took 19518 usecs
[ 0.602837] pci 0000:00:13.3: quirk_usb_early_handoff+0x0/0x6a6 took 19520 usecs
[ 0.622837] pci 0000:00:13.4: quirk_usb_early_handoff+0x0/0x6a6 took 19521 usecs
[ 0.623096] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.623111] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[ 0.623122] PCI: CLS 64 bytes, default 64
[ 0.623235] Unpacking initramfs...
[ 14.330181] Freeing initrd memory: 41312K
[ 14.330927] PCI-DMA: Disabling AGP.
[ 14.331018] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 14.331019] PCI-DMA: using GART IOMMU.
[ 14.331023] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 14.335706] check: Scanning for low memory corruption every 60 seconds
[ 14.336655] Initialise system trusted keyrings
[ 14.336667] Key type blacklist registered
[ 14.336769] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 14.339770] zbud: loaded
[ 14.340549] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 14.341023] fuse init (API version 7.28)
[ 14.420527] Key type asymmetric registered
[ 14.420530] Asymmetric key parser 'x509' registered
[ 14.420557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 14.420637] io scheduler mq-deadline registered
[ 14.421000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.421225] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 14.421250] ACPI: Power Button [PWRB]
[ 14.421314] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 14.421327] ACPI: Power Button [PWRF]
[ 14.421384] ACPI: duty_cycle spans bit 4
[ 14.421860] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 14.442487] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 14.445581] Linux agpgart interface v0.103
[ 14.449385] loop: module loaded
[ 14.449795] libphy: Fixed MDIO Bus: probed
[ 14.449796] tun: Universal TUN/TAP device driver, 1.6
[ 14.449853] PPP generic driver version 2.4.2
[ 14.449921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.449927] ehci-pci: EHCI PCI platform driver
[ 14.450156] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 14.450165] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 14.450174] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 14.450188] ehci-pci 0000:00:13.5: debug port 1
[ 14.450243] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe9ff000
[ 14.466733] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 14.466840] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 14.466842] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.466844] usb usb1: Product: EHCI Host Controller
[ 14.466845] usb usb1: Manufacturer: Linux 5.0.0-13-generic ehci_hcd
[ 14.466847] usb usb1: SerialNumber: 0000:00:13.5
[ 14.467014] hub 1-0:1.0: USB hub found
[ 14.467025] hub 1-0:1.0: 10 ports detected
[ 14.467454] ehci-platform: EHCI generic platform driver
[ 14.467472] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.467478] ohci-pci: OHCI PCI platform driver
[ 14.467674] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 14.467682] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 14.467719] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe9fe000
[ 14.530788] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 14.530790] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.530791] usb usb2: Product: OHCI PCI host controller
[ 14.530793] usb usb2: Manufacturer: Linux 5.0.0-13-generic ohci_hcd
[ 14.530794] usb usb2: SerialNumber: 0000:00:13.0
[ 14.530951] hub 2-0:1.0: USB hub found
[ 14.530962] hub 2-0:1.0: 2 ports detected
[ 14.531262] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 14.531269] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 14.531303] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe9fd000
[ 14.594791] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 14.594793] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.594794] usb usb3: Product: OHCI PCI host controller
[ 14.594796] usb usb3: Manufacturer: Linux 5.0.0-13-generic ohci_hcd
[ 14.594797] usb usb3: SerialNumber: 0000:00:13.1
[ 14.594942] hub 3-0:1.0: USB hub found
[ 14.594953] hub 3-0:1.0: 2 ports detected
[ 14.595247] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 14.595254] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 14.595292] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe9fc000
[ 14.658782] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 14.658784] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.658786] usb usb4: Product: OHCI PCI host controller
[ 14.658787] usb usb4: Manufacturer: Linux 5.0.0-13-generic ohci_hcd
[ 14.658789] usb usb4: SerialNumber: 0000:00:13.2
[ 14.658939] hub 4-0:1.0: USB hub found
[ 14.658950] hub 4-0:1.0: 2 ports detected
[ 14.659228] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 14.659236] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 14.659263] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe9fb000
[ 14.722793] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 14.722795] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.722797] usb usb5: Product: OHCI PCI host controller
[ 14.722798] usb usb5: Manufacturer: Linux 5.0.0-13-generic ohci_hcd
[ 14.722800] usb usb5: SerialNumber: 0000:00:13.3
[ 14.722949] hub 5-0:1.0: USB hub found
[ 14.722960] hub 5-0:1.0: 2 ports detected
[ 14.723242] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 14.723249] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 14.723275] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe9fa000
[ 14.786782] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 14.786784] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.786786] usb usb6: Product: OHCI PCI host controller
[ 14.786787] usb usb6: Manufacturer: Linux 5.0.0-13-generic ohci_hcd
[ 14.786788] usb usb6: SerialNumber: 0000:00:13.4
[ 14.786942] hub 6-0:1.0: USB hub found
[ 14.786954] hub 6-0:1.0: 2 ports detected
[ 14.787111] ohci-platform: OHCI generic platform driver
[ 14.787123] uhci_hcd: USB Universal Host Controller Interface driver
[ 14.787218] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 14.787219] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 14.787992] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.788131] mousedev: PS/2 mouse device common for all mice
[ 14.788321] rtc_cmos 00:00: RTC can wake from S4
[ 14.788482] rtc_cmos 00:00: registered as rtc0
[ 14.788508] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 14.788518] i2c /dev entries driver
[ 14.788674] device-mapper: uevent: version 1.0.3
[ 14.788784] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 14.788816] platform eisa.0: Probing EISA bus 0
[ 14.788821] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 14.788823] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 14.788825] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 14.788826] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 14.788828] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 14.788829] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 14.788831] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 14.788832] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 14.788834] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 14.788835] platform eisa.0: EISA: Detected 0 cards
[ 14.788877] ledtrig-cpu: registered to indicate activity on CPUs
[ 14.789288] NET: Registered protocol family 10
[ 14.800625] Segment Routing with IPv6
[ 14.800664] NET: Registered protocol family 17
[ 14.800737] Key type dns_resolver registered
[ 14.801139] RAS: Correctable Errors collector initialized.
[ 14.801370] registered taskstats version 1
[ 14.801384] Loading compiled-in X.509 certificates
[ 14.804831] Loaded X.509 cert 'Build time autogenerated kernel key: a91cf5411f714b0dcaaa6539e6139a929efd4f6a'
[ 14.804875] zswap: loaded using pool lzo/zbud
[ 14.810029] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 14.816328] Key type big_key registered
[ 14.816336] Key type trusted registered
[ 14.822031] Key type encrypted registered
[ 14.822038] AppArmor: AppArmor sha1 policy hashing enabled
[ 14.822050] ima: No TPM chip found, activating TPM-bypass!
[ 14.822058] ima: Allocated hash algorithm: sha1
[ 14.822067] No architecture policies found
[ 14.822089] evm: Initialising EVM extended attributes:
[ 14.822090] evm: security.selinux
[ 14.822090] evm: security.SMACK64
[ 14.822091] evm: security.SMACK64EXEC
[ 14.822091] evm: security.SMACK64TRANSMUTE
[ 14.822092] evm: security.SMACK64MMAP
[ 14.822093] evm: security.apparmor
[ 14.822093] evm: security.ima
[ 14.822094] evm: security.capability
[ 14.822095] evm: HMAC attrs: 0x1
[ 14.822592] Magic number: 11:665:384
[ 14.822609] usb usb2: hash matches
[ 14.822806] rtc_cmos 00:00: setting system clock to 2019-07-18T14:24:07 UTC (1563459847)
[ 14.823006] powernow_k8: [Firmware Bug]: No compatible ACPI _PSS objects found.
[Firmware Bug]: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: If that doesn't help, try upgrading your BIOS.
[ 14.823127] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 14.826572] Freeing unused decrypted memory: 2040K
[ 14.828182] Freeing unused kernel image memory: 2576K
[ 14.838775] Write protecting the kernel read-only data: 22528k
[ 14.840235] Freeing unused kernel image memory: 2016K
[ 14.841440] Freeing unused kernel image memory: 1852K
[ 14.860641] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 14.860652] Run /init as init process
[ 15.031501] ahci 0000:00:12.0: version 3.0
[ 15.031722] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 15.031826] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 15.031829] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 15.035562] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B06 (\SMOV) (20181213/utaddress-213)
[ 15.035571] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.038783] scsi host1: pata_atiixp
[ 15.039008] scsi host0: ahci
[ 15.042406] scsi host2: pata_atiixp
[ 15.042511] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 15.042513] ata6: DUMMY
[ 15.046322] scsi host3: ahci
[ 15.049342] scsi host4: ahci
[ 15.052138] scsi host5: ahci
[ 15.052331] ata1: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900 irq 22
[ 15.052334] ata2: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 22
[ 15.052336] ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 22
[ 15.052339] ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 22
[ 15.076067] libphy: r8169: probed
[ 15.076668] r8169 0000:02:00.0 eth0: RTL8168b/8111b, 00:1d:92:47:0d:17, XID 380, IRQ 24
[ 15.076671] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 15.102768] usb 3-2: new full-speed USB device number 2 using ohci-pci
[ 15.104923] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 15.132435] [drm] radeon kernel modesetting enabled.
[ 15.133060] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x174B:0xE134 0x00).
[ 15.133115] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[ 15.133120] caller pci_map_rom+0x71/0x1c0 mapping multiple BARs
[ 15.134168] ATOM BIOS: CEDAR
[ 15.134235] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 15.134237] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 15.134241] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 15.134242] [drm] RAM width 64bits DDR
[ 15.134341] [TTM] Zone kernel: Available graphics memory: 4083106 kiB
[ 15.134342] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 15.134343] [TTM] Initializing pool allocator
[ 15.134349] [TTM] Initializing DMA pool allocator
[ 15.134373] [drm] radeon: 1024M of VRAM memory ready
[ 15.134375] [drm] radeon: 1024M of GTT memory ready.
[ 15.134389] [drm] Loading CEDAR Microcode
[ 15.134522] [drm] Internal thermal controller with fan control
[ 15.161698] [drm] radeon: dpm initialized
[ 15.161859] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 15.180960] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[ 15.181058] radeon 0000:01:00.0: WB enabled
[ 15.181062] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(____ptrval____)
[ 15.181064] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(____ptrval____)
[ 15.181484] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x(____ptrval____)
[ 15.181487] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.181488] [drm] Driver supports precise vblank timestamp query.
[ 15.181489] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 15.181546] radeon 0000:01:00.0: radeon: using MSI.
[ 15.181573] [drm] radeon: irq initialized.
[ 15.197723] [drm] ring test on 0 succeeded in 1 usecs
[ 15.197729] [drm] ring test on 3 succeeded in 2 usecs
[ 15.383590] [drm] ring test on 5 succeeded in 1 usecs
[ 15.383595] [drm] UVD initialized successfully.
[ 15.383770] [drm] ib test on ring 0 succeeded in 0 usecs
[ 15.383819] [drm] ib test on ring 3 succeeded in 0 usecs
[ 15.530743] ata2: softreset failed (device not ready)
[ 15.530789] ata2: applying PMP SRST workaround and retrying
[ 15.530807] ata3: softreset failed (device not ready)
[ 15.530847] ata3: applying PMP SRST workaround and retrying
[ 15.530864] ata1: softreset failed (device not ready)
[ 15.530904] ata1: applying PMP SRST workaround and retrying
[ 15.590815] usb 3-2: New USB device found, idVendor=248a, idProduct=8367, bcdDevice= 1.00
[ 15.590817] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 15.590818] usb 3-2: Product: 2.4G Mouse
[ 15.590820] usb 3-2: Manufacturer: Telink
[ 15.598615] hidraw: raw HID events driver (C) Jiri Kosina
[ 15.612047] usbcore: registered new interface driver usbhid
[ 15.612049] usbhid: USB HID core driver
[ 15.615985] input: Telink 2.4G Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:248A:8367.0001/input/input3
[ 15.616165] input: Telink 2.4G Mouse Consumer Control as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:248A:8367.0001/input/input4
[ 15.674813] input: Telink 2.4G Mouse System Control as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:248A:8367.0001/input/input5
[ 15.674893] hid-generic 0003:248A:8367.0001: input,hidraw0: USB HID v1.11 Mouse [Telink 2.4G Mouse] on usb-0000:00:13.1-2/input0
[ 15.675236] input: Telink 2.4G Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.1/0003:248A:8367.0002/input/input6
[ 15.690758] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 15.690790] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 15.690822] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 15.690951] ata1.00: ATA-11: PNY CS900 120GB SSD, CS900612, max UDMA/133
[ 15.690954] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 15.690957] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.691103] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.691105] ata1.00: configured for UDMA/133
[ 15.691552] scsi 0:0:0:0: Direct-Access ATA PNY CS900 120GB 0612 PQ: 0 ANSI: 5
[ 15.691698] ata2.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
[ 15.691700] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 15.691706] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.692030] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
[ 15.692032] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 15.692036] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.692069] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 15.692089] sd 0:0:0:0: [sda] Write Protect is off
[ 15.692091] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.692127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.692593] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.692596] ata2.00: configured for UDMA/133
[ 15.692678] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.693078] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.693081] ata3.00: configured for UDMA/133
[ 15.693096] scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 0A80 PQ: 0 ANSI: 5
[ 15.693393] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 15.693554] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 15.693556] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 15.693577] sd 3:0:0:0: [sdb] Write Protect is off
[ 15.693579] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 15.693615] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.693806] scsi 4:0:0:0: Direct-Access ATA TOSHIBA HDWD110 A8J0 PQ: 0 ANSI: 5
[ 15.694126] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 15.694152] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 15.694154] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ 15.694173] sd 4:0:0:0: [sdc] Write Protect is off
[ 15.694175] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 15.694209] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.694803] sda: sda1 sda2 sda3
[ 15.695502] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.722585] sdc: sdc1
[ 15.723010] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 15.723335] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 15.738908] hid-generic 0003:248A:8367.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink 2.4G Mouse] on usb-0000:00:13.1-2/input1
[ 15.744471] sdb: sdb1 sdb2
[ 15.745119] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 15.750764] ata1.00: exception Emask 0x50 SAct 0x18000000 SErr 0x680900 action 0x6 frozen
[ 15.750810] ata1.00: irq_stat 0x08000000, interface fatal error
[ 15.750851] ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 15.750892] ata1.00: failed command: READ FPDMA QUEUED
[ 15.750934] ata1.00: cmd 60/ff:d8:00:44:79/00:00:06:00:00/40 tag 27 ncq dma 130560 in
res 40/00:e0:ff:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 15.750977] ata1.00: status: { DRDY }
[ 15.751016] ata1.00: failed command: READ FPDMA QUEUED
[ 15.751059] ata1.00: cmd 60/01:e0:ff:44:79/00:00:06:00:00/40 tag 28 ncq dma 512 in
res 40/00:e0:ff:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 15.751105] ata1.00: status: { DRDY }
[ 15.751150] ata1: hard resetting link
[ 15.834737] ata4: softreset failed (device not ready)
[ 15.834781] ata4: applying PMP SRST workaround and retrying
[ 15.838638] random: fast init done
[ 15.880590] usb 1-6: New USB device found, idVendor=13fe, idProduct=3100, bcdDevice= 1.10
[ 15.880594] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 15.880595] usb 1-6: Product: USB DISK 2.0
[ 15.880597] usb 1-6: Manufacturer:
[ 15.880598] usb 1-6: SerialNumber: 078B1A552978
[ 15.880818] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 15.880831] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 15.880864] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 15.994768] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 15.997502] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
[ 15.997506] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.001459] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.001461] ata4.00: configured for UDMA/100
[ 16.006742] usb 1-8: new high-speed USB device number 4 using ehci-pci
[ 16.078756] [drm] ib test on ring 5 succeeded
[ 16.079734] [drm] Radeon Display Connectors
[ 16.079736] [drm] Connector 0:
[ 16.079736] [drm] HDMI-A-1
[ 16.079737] [drm] HPD1
[ 16.079739] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 16.079739] [drm] Encoders:
[ 16.079740] [drm] DFP1: INTERNAL_UNIPHY1
[ 16.079741] [drm] Connector 1:
[ 16.079741] [drm] DVI-I-1
[ 16.079742] [drm] HPD4
[ 16.079743] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 16.079744] [drm] Encoders:
[ 16.079744] [drm] DFP2: INTERNAL_UNIPHY
[ 16.079745] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 16.079746] [drm] Connector 2:
[ 16.079746] [drm] VGA-1
[ 16.079747] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 16.079748] [drm] Encoders:
[ 16.079749] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 16.137619] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
[ 16.141546] [drm] fb mappable at 0xD034D000
[ 16.141548] [drm] vram apper at 0xD0000000
[ 16.141549] [drm] size 8294400
[ 16.141549] [drm] fb depth is 24
[ 16.141550] [drm] pitch is 7680
[ 16.141668] fbcon: radeondrmfb (fb0) is primary device
[ 16.193348] Console: switching to colour frame buffer device 240x67
[ 16.202684] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 16.204620] usb 1-8: New USB device found, idVendor=05e3, idProduct=070e, bcdDevice=96.02
[ 16.204622] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 16.204624] usb 1-8: Product: USB Storage
[ 16.204625] usb 1-8: SerialNumber: 000000009602
[ 16.214810] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 16.226745] ata1: softreset failed (device not ready)
[ 16.226796] ata1: applying PMP SRST workaround and retrying
[ 16.316453] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 16.316455] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 16.316780] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 16.316892] sr 5:0:0:0: Attached scsi generic sg3 type 5
[ 16.352597] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 16.352818] scsi host6: usb-storage 1-6:1.0
[ 16.352945] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 16.353074] scsi host7: usb-storage 1-8:1.0
[ 16.353163] usbcore: registered new interface driver usb-storage
[ 16.355213] usbcore: registered new interface driver uas
[ 16.386754] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 16.386888] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.387054] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.387058] ata1.00: configured for UDMA/133
[ 16.387080] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 16.387083] sd 0:0:0:0: [sda] tag#27 Sense Key : Illegal Request [current]
[ 16.387086] sd 0:0:0:0: [sda] tag#27 Add. Sense: Unaligned write command
[ 16.387089] sd 0:0:0:0: [sda] tag#27 CDB: Read(10) 28 00 06 79 44 00 00 00 ff 00
[ 16.387092] print_req_error: I/O error, dev sda, sector 108610560 flags 84700
[ 16.387172] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 16.387174] sd 0:0:0:0: [sda] tag#28 Sense Key : Illegal Request [current]
[ 16.387177] sd 0:0:0:0: [sda] tag#28 Add. Sense: Unaligned write command
[ 16.387180] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 06 79 44 ff 00 00 01 00
[ 16.387181] print_req_error: I/O error, dev sda, sector 108610815 flags 80700
[ 16.387250] ata1: EH complete
[ 16.418750] ata1.00: exception Emask 0x50 SAct 0x8000300 SErr 0x680900 action 0x6 frozen
[ 16.418814] ata1.00: irq_stat 0x08000000, interface fatal error
[ 16.418859] ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 16.418909] ata1.00: failed command: READ FPDMA QUEUED
[ 16.418950] ata1.00: cmd 60/f0:40:10:49:39/00:00:0a:00:00/40 tag 8 ncq dma 122880 in
res 40/00:48:10:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 16.419061] ata1.00: status: { DRDY }
[ 16.419089] ata1.00: failed command: READ FPDMA QUEUED
[ 16.419131] ata1.00: cmd 60/08:48:10:44:79/00:00:06:00:00/40 tag 9 ncq dma 4096 in
res 40/00:48:10:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 16.419239] ata1.00: status: { DRDY }
[ 16.419267] ata1.00: failed command: READ FPDMA QUEUED
[ 16.419309] ata1.00: cmd 60/f8:d8:00:46:39/00:00:0a:00:00/40 tag 27 ncq dma 126976 in
res 40/00:48:10:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 16.419419] ata1.00: status: { DRDY }
[ 16.419450] ata1: hard resetting link
[ 16.894742] ata1: softreset failed (device not ready)
[ 16.894792] ata1: applying PMP SRST workaround and retrying
[ 17.054748] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 17.054877] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 17.055028] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 17.055032] ata1.00: configured for UDMA/133
[ 17.055054] sd 0:0:0:0: [sda] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 17.055057] sd 0:0:0:0: [sda] tag#8 Sense Key : Illegal Request [current]
[ 17.055060] sd 0:0:0:0: [sda] tag#8 Add. Sense: Unaligned write command
[ 17.055063] sd 0:0:0:0: [sda] tag#8 CDB: Read(10) 28 00 0a 39 49 10 00 00 f0 00
[ 17.055066] print_req_error: I/O error, dev sda, sector 171526416 flags 80700
[ 17.055150] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 17.055152] sd 0:0:0:0: [sda] tag#27 Sense Key : Illegal Request [current]
[ 17.055154] sd 0:0:0:0: [sda] tag#27 Add. Sense: Unaligned write command
[ 17.055156] sd 0:0:0:0: [sda] tag#27 CDB: Read(10) 28 00 0a 39 46 00 00 00 f8 00
[ 17.055158] print_req_error: I/O error, dev sda, sector 171525632 flags 80700
[ 17.055227] ata1: EH complete
[ 17.098744] ata1.00: exception Emask 0x50 SAct 0x18000000 SErr 0x680900 action 0x6 frozen
[ 17.098815] ata1.00: irq_stat 0x08000000, interface fatal error
[ 17.098860] ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 17.098910] ata1.00: failed command: READ FPDMA QUEUED
[ 17.098952] ata1.00: cmd 60/ff:d8:00:48:f9/00:00:0d:00:00/40 tag 27 ncq dma 130560 in
res 40/00:e0:ff:48:f9/00:00:0d:00:00/40 Emask 0x50 (ATA bus error)
[ 17.099063] ata1.00: status: { DRDY }
[ 17.099092] ata1.00: failed command: READ FPDMA QUEUED
[ 17.099133] ata1.00: cmd 60/01:e0:ff:48:f9/00:00:0d:00:00/40 tag 28 ncq dma 512 in
res 40/00:e0:ff:48:f9/00:00:0d:00:00/40 Emask 0x50 (ATA bus error)
[ 17.099241] ata1.00: status: { DRDY }
[ 17.099272] ata1: hard resetting link
[ 17.359560] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 17.359961] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 17.360312] scsi 7:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 17.361953] scsi 7:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 17.362086] sd 6:0:0:0: [sdd] 15663104 512-byte logical blocks: (8.02 GB/7.47 GiB)
[ 17.362689] sd 6:0:0:0: [sdd] Write Protect is off
[ 17.362693] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 17.362813] scsi 7:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 17.363295] sd 6:0:0:0: [sdd] No Caching mode page found
[ 17.363341] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 17.363552] scsi 7:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 17.363933] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 17.364292] sd 7:0:0:1: Attached scsi generic sg6 type 0
[ 17.364665] sd 7:0:0:2: Attached scsi generic sg7 type 0
[ 17.365013] sd 7:0:0:3: Attached scsi generic sg8 type 0
[ 17.368188] sd 7:0:0:0: [sde] Attached SCSI removable disk
[ 17.370192] sd 7:0:0:3: [sdh] Attached SCSI removable disk
[ 17.370815] sd 7:0:0:1: [sdf] Attached SCSI removable disk
[ 17.372066] sd 7:0:0:2: [sdg] Attached SCSI removable disk
[ 17.574741] ata1: softreset failed (device not ready)
[ 17.574791] ata1: applying PMP SRST workaround and retrying
[ 17.734748] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 17.734879] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 17.735011] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 17.735014] ata1.00: configured for UDMA/133
[ 17.735033] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 17.735036] sd 0:0:0:0: [sda] tag#27 Sense Key : Illegal Request [current]
[ 17.735038] sd 0:0:0:0: [sda] tag#27 Add. Sense: Unaligned write command
[ 17.735042] sd 0:0:0:0: [sda] tag#27 CDB: Read(10) 28 00 0d f9 48 00 00 00 ff 00
[ 17.735044] print_req_error: I/O error, dev sda, sector 234440704 flags 84700
[ 17.735115] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 17.735118] sd 0:0:0:0: [sda] tag#28 Sense Key : Illegal Request [current]
[ 17.735120] sd 0:0:0:0: [sda] tag#28 Add. Sense: Unaligned write command
[ 17.735122] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 0d f9 48 ff 00 00 01 00
[ 17.735123] print_req_error: I/O error, dev sda, sector 234440959 flags 80700
[ 17.735192] ata1: EH complete
[ 17.743977] sdd: sdd1
[ 17.746761] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 18.530751] ata1: limiting SATA link speed to 1.5 Gbps
[ 18.530756] ata1.00: exception Emask 0x50 SAct 0xc0 SErr 0x680900 action 0x6 frozen
[ 18.530760] ata1.00: irq_stat 0x08000000, interface fatal error
[ 18.530763] ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 18.530766] ata1.00: failed command: READ FPDMA QUEUED
[ 18.530772] ata1.00: cmd 60/80:30:00:47:79/00:00:06:00:00/40 tag 6 ncq dma 65536 in
res 40/00:38:88:47:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 18.530774] ata1.00: status: { DRDY }
[ 18.530777] ata1.00: failed command: READ FPDMA QUEUED
[ 18.530782] ata1.00: cmd 60/68:38:88:47:79/00:00:06:00:00/40 tag 7 ncq dma 53248 in
res 40/00:38:88:47:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 18.530784] ata1.00: status: { DRDY }
[ 18.530788] ata1: hard resetting link
[ 19.006741] ata1: softreset failed (device not ready)
[ 19.006747] ata1: applying PMP SRST workaround and retrying
[ 19.166763] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 19.166905] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 19.167044] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 19.167048] ata1.00: configured for UDMA/133
[ 19.167068] sd 0:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 19.167071] sd 0:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current]
[ 19.167074] sd 0:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
[ 19.167078] sd 0:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 06 79 47 00 00 00 80 00
[ 19.167080] print_req_error: I/O error, dev sda, sector 108611328 flags 80700
[ 19.167106] sd 0:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 19.167108] sd 0:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current]
[ 19.167111] sd 0:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
[ 19.167113] sd 0:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 06 79 47 88 00 00 68 00
[ 19.167114] print_req_error: I/O error, dev sda, sector 108611464 flags 80700
[ 19.167126] ata1: EH complete
[ 19.167350] random: crng init done
[ 19.167351] random: 7 urandom warning(s) missed due to ratelimiting
[ 19.379378] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 19.388469] JFS: nTxBlock = 8192, nTxLock = 65536
[ 19.441160] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.462540] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 19.483829] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 19.567411] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.686274] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 19.829946] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.022413] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 22.618905] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 22.622786] ISO 9660 Extensions: RRIP_1991A
[ 33.923648] systemd[1]: Inserted module 'autofs4'
[ 33.953687] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 33.953860] systemd[1]: Detected architecture x86-64.
[ 33.957282] systemd[1]: Set hostname to <ubuntu>.
[ 33.957607] systemd[1]: Initializing machine ID from random generator.
[ 34.243324] systemd[1]: /lib/systemd/system/spice-vdagentd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/spice-vdagentd/spice-vdagentd.pid → /run/spice-vdagentd/spice-vdagentd.pid; please update the unit file accordingly.
[ 34.246531] systemd[1]: cdrom.mount: Unit is bound to inactive unit dev-loop0.device. Stopping, too.
[ 34.249834] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 34.251196] systemd[1]: Created slice User and Session Slice.
[ 34.251241] systemd[1]: Reached target Remote File Systems.
[ 34.251271] systemd[1]: Reached target Slices.
[ 34.256418] systemd[1193]: cdrom.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory
[ 34.512462] lp: driver loaded but no devices found
[ 34.550760] ppdev: user-space parallel port driver
[ 34.702930] systemd-journald[1203]: Received request to flush runtime journal from PID 1
[ 37.291189] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 37.291213] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 38.583149] RTL8211B Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 38.612034] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 38.661438] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
[ 38.677741] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 38.677753] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 38.677756] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 38.677757] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 38.677758] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 38.677760] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 38.677762] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 38.677764] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 38.677765] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 38.686435] r8169 0000:02:00.0 enp2s0: Link is Down
[ 38.728217] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 38.728326] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 38.728414] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 38.728506] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 38.728600] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 38.728688] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 38.728782] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 38.728870] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 40.132350] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 40.132366] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 40.909395] kvm: Nested Virtualization enabled
[ 40.956185] MCE: In-kernel MCE decoding enabled.
[ 41.017990] audit: type=1400 audit(1563459873.688:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1487 comm="apparmor_parser"
[ 41.019053] audit: type=1400 audit(1563459873.692:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1487 comm="apparmor_parser"
[ 41.045020] EDAC amd64: Node 0: DRAM ECC enabled.
[ 41.045024] EDAC amd64: K8 revF or later detected (node 0).
[ 41.045046] EDAC MC: DCT0 chip selects:
[ 41.045066] EDAC amd64: MC: 0: 2048MB 1: 2048MB
[ 41.045067] EDAC amd64: MC: 2: 2048MB 3: 2048MB
[ 41.045068] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 41.045068] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 41.045069] EDAC amd64: using x4 syndromes.
[ 41.074484] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.3 (INTERRUPT)
[ 41.074504] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 41.074505] AMD64 EDAC driver v3.5.0
[ 75.960787] audit: type=1400 audit(1563459908.635:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=4115 comm="apparmor_parser"
[ 75.961403] audit: type=1400 audit(1563459908.635:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4115 comm="apparmor_parser"
[ 76.061881] audit: type=1400 audit(1563459908.735:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=4127 comm="apparmor_parser"
[ 76.396699] audit: type=1400 audit(1563459909.069:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=4128 comm="apparmor_parser"
[ 104.955731] rfkill: input handler disabled
[ 156.122873] audit: type=1400 audit(1563459988.797:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=5625 comm="apparmor_parser"
[ 156.357028] audit: type=1400 audit(1563459989.029:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=5626 comm="apparmor_parser"
[ 156.703571] audit: type=1400 audit(1563459989.377:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=5648 comm="apparmor_parser"
[ 156.902034] audit: type=1400 audit(1563459989.573:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=5649 comm="apparmor_parser"
[ 157.797338] audit: type=1400 audit(1563459990.469:12): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=5656 comm="apparmor_parser"
[ 157.797719] audit: type=1400 audit(1563459990.469:13): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5656 comm="apparmor_parser"
[ 157.828388] audit: type=1400 audit(1563459990.501:14): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=5658 comm="apparmor_parser"
[ 158.004234] audit: type=1400 audit(1563459990.677:15): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=5659 comm="apparmor_parser"
[ 158.334001] audit: type=1400 audit(1563459991.005:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=5666 comm="apparmor_parser"
[ 158.394022] audit: type=1400 audit(1563459991.065:17): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=5668 comm="apparmor_parser"
[ 161.186557] kauditd_printk_skb: 9 callbacks suppressed
[ 161.186560] audit: type=1400 audit(1563459993.857:27): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=5697 comm="apparmor_parser"
[ 161.752554] audit: type=1400 audit(1563459994.425:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=5705 comm="apparmor_parser"
[ 161.829590] audit: type=1400 audit(1563459994.501:29): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=5707 comm="apparmor_parser"
[ 162.729985] audit: type=1400 audit(1563459995.401:30): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=5714 comm="apparmor_parser"
[ 162.730374] audit: type=1400 audit(1563459995.401:31): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5714 comm="apparmor_parser"
[ 162.759065] audit: type=1400 audit(1563459995.433:32): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=5716 comm="apparmor_parser"
[ 162.938141] audit: type=1400 audit(1563459995.609:33): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=5717 comm="apparmor_parser"
[ 163.557931] audit: type=1400 audit(1563459996.229:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=5724 comm="apparmor_parser"
[ 163.627777] audit: type=1400 audit(1563459996.301:35): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=5726 comm="apparmor_parser"
[ 164.522929] audit: type=1400 audit(1563459997.196:36): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=5733 comm="apparmor_parser"
[ 166.603719] kauditd_printk_skb: 5 callbacks suppressed
[ 166.603722] audit: type=1400 audit(1563459999.279:42): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=5752 comm="apparmor_parser"
[ 166.604105] audit: type=1400 audit(1563459999.279:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5752 comm="apparmor_parser"
[ 166.677557] audit: type=1400 audit(1563459999.351:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=5807 comm="apparmor_parser"
[ 166.839381] audit: type=1400 audit(1563459999.515:45): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=5808 comm="apparmor_parser"
[ 167.072227] audit: type=1400 audit(1563459999.747:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=5821 comm="apparmor_parser"
[ 168.049578] audit: type=1400 audit(1563460000.723:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=5822 comm="apparmor_parser"
[ 169.229188] audit: type=1400 audit(1563460001.902:48): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-characters" pid=5920 comm="apparmor_parser"
[ 169.463458] audit: type=1400 audit(1563460002.138:49): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=5921 comm="apparmor_parser"
[ 170.633162] audit: type=1400 audit(1563460003.306:50): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=5933 comm="apparmor_parser"
[ 170.633840] audit: type=1400 audit(1563460003.306:51): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5933 comm="apparmor_parser"
[ 172.796263] kauditd_printk_skb: 4 callbacks suppressed
[ 172.796266] audit: type=1400 audit(1563460005.469:56): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=5970 comm="apparmor_parser"
[ 172.796904] audit: type=1400 audit(1563460005.469:57): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5970 comm="apparmor_parser"
[ 172.881709] audit: type=1400 audit(1563460005.553:58): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=5983 comm="apparmor_parser"
[ 173.041105] audit: type=1400 audit(1563460005.713:59): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=5984 comm="apparmor_parser"
[ 173.945420] audit: type=1400 audit(1563460006.617:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=6001 comm="apparmor_parser"
[ 173.994846] audit: type=1400 audit(1563460006.669:61): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=6010 comm="apparmor_parser"
[ 174.913092] audit: type=1400 audit(1563460007.584:62): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=6017 comm="apparmor_parser"
[ 174.913757] audit: type=1400 audit(1563460007.584:63): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=6017 comm="apparmor_parser"
[ 174.991718] audit: type=1400 audit(1563460007.664:64): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=6019 comm="apparmor_parser"
[ 175.118557] audit: type=1400 audit(1563460007.788:65): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=6020 comm="apparmor_parser"
[ 178.476947] kauditd_printk_skb: 6 callbacks suppressed
[ 178.476951] audit: type=1400 audit(1563460011.151:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=6126 comm="apparmor_parser"
[ 178.532116] audit: type=1400 audit(1563460011.207:73): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=6831 comm="apparmor_parser"
[ 179.475676] audit: type=1400 audit(1563460012.151:74): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7000 comm="apparmor_parser"
[ 179.476321] audit: type=1400 audit(1563460012.151:75): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7000 comm="apparmor_parser"
[ 179.563546] audit: type=1400 audit(1563460012.239:76): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=7117 comm="apparmor_parser"
[ 179.789745] audit: type=1400 audit(1563460012.463:77): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=7118 comm="apparmor_parser"
[ 181.122926] audit: type=1400 audit(1563460013.799:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=7148 comm="apparmor_parser"
[ 181.189431] audit: type=1400 audit(1563460013.862:79): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=7199 comm="apparmor_parser"
[ 181.214780] raid6: sse2x4 gen() 3323 MB/s
[ 181.262733] raid6: sse2x4 xor() 1917 MB/s
[ 181.310742] raid6: sse2x2 gen() 3173 MB/s
[ 181.358725] raid6: sse2x2 xor() 2715 MB/s
[ 181.406748] raid6: sse2x1 gen() 2662 MB/s
[ 181.454727] raid6: sse2x1 xor() 2426 MB/s
[ 181.454728] raid6: using algorithm sse2x4 gen() 3323 MB/s
[ 181.454729] raid6: .... xor() 1917 MB/s, rmw enabled
[ 181.454730] raid6: using intx1 recovery algorithm
[ 181.463043] xor: measuring software checksum speed
[ 181.502722] prefetch64-sse: 6158.000 MB/sec
[ 181.542723] generic_sse: 6132.000 MB/sec
[ 181.542724] xor: using function: prefetch64-sse (6158.000 MB/sec)
[ 181.632781] Btrfs loaded, crc32c=crc32c-generic
[ 182.243746] audit: type=1400 audit(1563460014.918:80): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7208 comm="apparmor_parser"
[ 182.244244] audit: type=1400 audit(1563460014.918:81): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7208 comm="apparmor_parser"
[ 182.631344] sdb: sdb1 sdb2
[ 182.670768] sdc: sdc1
[ 182.764135] sdc: sdc1
[ 183.519753] sdb: sdb1 sdb2
[ 184.611631] kauditd_printk_skb: 2 callbacks suppressed
[ 184.611634] audit: type=1400 audit(1563460017.286:84): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=7234 comm="apparmor_parser"
[ 184.716347] audit: type=1400 audit(1563460017.390:85): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=7360 comm="apparmor_parser"
[ 184.942934] audit: type=1400 audit(1563460017.618:86): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=7369 comm="apparmor_parser"
[ 185.781183] audit: type=1400 audit(1563460018.453:87): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=7370 comm="apparmor_parser"
[ 186.724767] audit: type=1400 audit(1563460019.397:88): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7383 comm="apparmor_parser"
[ 186.725421] audit: type=1400 audit(1563460019.397:89): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7383 comm="apparmor_parser"
[ 186.805167] audit: type=1400 audit(1563460019.477:90): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=7387 comm="apparmor_parser"
[ 186.979689] audit: type=1400 audit(1563460019.653:91): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=7388 comm="apparmor_parser"
[ 188.043146] audit: type=1400 audit(1563460020.717:92): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=7396 comm="apparmor_parser"
[ 188.129096] audit: type=1400 audit(1563460020.801:93): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=7398 comm="apparmor_parser"
[ 190.799655] kauditd_printk_skb: 2 callbacks suppressed
[ 190.799658] audit: type=1400 audit(1563460023.472:96): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7503 comm="apparmor_parser"
[ 190.800331] audit: type=1400 audit(1563460023.472:97): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7503 comm="apparmor_parser"
[ 190.836508] audit: type=1400 audit(1563460023.508:98): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=7544 comm="apparmor_parser"
[ 191.063485] audit: type=1400 audit(1563460023.736:99): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=7545 comm="apparmor_parser"
[ 191.612330] audit: type=1400 audit(1563460024.284:100): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=7576 comm="apparmor_parser"
[ 191.640495] audit: type=1400 audit(1563460024.312:101): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=7593 comm="apparmor_parser"
[ 192.550578] audit: type=1400 audit(1563460025.220:102): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7600 comm="apparmor_parser"
[ 192.551162] audit: type=1400 audit(1563460025.224:103): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7600 comm="apparmor_parser"
[ 192.596886] audit: type=1400 audit(1563460025.268:104): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=7602 comm="apparmor_parser"
[ 192.754291] audit: type=1400 audit(1563460025.424:105): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=7603 comm="apparmor_parser"
[ 196.150618] kauditd_printk_skb: 8 callbacks suppressed
[ 196.150622] audit: type=1400 audit(1563460028.819:114): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7639 comm="apparmor_parser"
[ 196.151227] audit: type=1400 audit(1563460028.823:115): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7639 comm="apparmor_parser"
[ 196.180177] audit: type=1400 audit(1563460028.851:116): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=7641 comm="apparmor_parser"
[ 196.351109] audit: type=1400 audit(1563460029.023:117): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=7642 comm="apparmor_parser"
[ 197.303035] audit: type=1400 audit(1563460029.979:118): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=7649 comm="apparmor_parser"
[ 197.331124] audit: type=1400 audit(1563460030.007:119): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=7651 comm="apparmor_parser"
[ 197.550580] audit: type=1400 audit(1563460030.223:120): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=7658 comm="apparmor_parser"
[ 198.370935] audit: type=1400 audit(1563460031.047:121): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=7659 comm="apparmor_parser"
[ 199.262586] audit: type=1400 audit(1563460031.935:122): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7666 comm="apparmor_parser"
[ 199.263133] audit: type=1400 audit(1563460031.939:123): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7666 comm="apparmor_parser"
[ 201.386693] kauditd_printk_skb: 4 callbacks suppressed
[ 201.386696] audit: type=1400 audit(1563460034.059:128): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7685 comm="apparmor_parser"
[ 201.387313] audit: type=1400 audit(1563460034.063:129): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7685 comm="apparmor_parser"
[ 201.417619] audit: type=1400 audit(1563460034.091:130): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=7687 comm="apparmor_parser"
[ 201.596017] audit: type=1400 audit(1563460034.271:131): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=7688 comm="apparmor_parser"
[ 202.598050] audit: type=1400 audit(1563460035.271:132): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=7695 comm="apparmor_parser"
[ 202.669503] audit: type=1400 audit(1563460035.343:133): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=7697 comm="apparmor_parser"
[ 203.579887] audit: type=1400 audit(1563460036.255:134): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7705 comm="apparmor_parser"
[ 203.580265] audit: type=1400 audit(1563460036.255:135): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7705 comm="apparmor_parser"
[ 203.626330] audit: type=1400 audit(1563460036.299:136): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=7707 comm="apparmor_parser"
[ 203.785522] audit: type=1400 audit(1563460036.458:137): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=7708 comm="apparmor_parser"
[ 206.919798] kauditd_printk_skb: 7 callbacks suppressed
[ 206.919802] audit: type=1400 audit(1563460039.594:145): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=7735 comm="apparmor_parser"
[ 208.358449] audit: type=1400 audit(1563460041.030:146): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=7861 comm="apparmor_parser"
[ 208.743786] audit: type=1400 audit(1563460041.418:147): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=7862 comm="apparmor_parser"
[ 209.866380] audit: type=1400 audit(1563460042.538:148): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7888 comm="apparmor_parser"
[ 209.867434] audit: type=1400 audit(1563460042.542:149): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7888 comm="apparmor_parser"
[ 209.896529] audit: type=1400 audit(1563460042.570:150): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=7895 comm="apparmor_parser"
[ 210.113745] audit: type=1400 audit(1563460042.786:151): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=7896 comm="apparmor_parser"
[ 210.500266] audit: type=1400 audit(1563460043.174:152): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=7905 comm="apparmor_parser"
[ 210.549254] audit: type=1400 audit(1563460043.222:153): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=7911 comm="apparmor_parser"
[ 211.540940] audit: type=1400 audit(1563460044.214:154): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7918 comm="apparmor_parser"
[ 212.171418] kauditd_printk_skb: 3 callbacks suppressed
[ 212.171420] audit: type=1400 audit(1563460044.846:158): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=7942 comm="apparmor_parser"
[ 212.213740] audit: type=1400 audit(1563460044.886:159): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=7946 comm="apparmor_parser"
[ 213.195877] audit: type=1400 audit(1563460045.870:160): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=7953 comm="apparmor_parser"
[ 213.196550] audit: type=1400 audit(1563460045.870:161): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7953 comm="apparmor_parser"
[ 213.277580] audit: type=1400 audit(1563460045.950:162): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=7979 comm="apparmor_parser"
[ 213.415402] audit: type=1400 audit(1563460046.090:163): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=7980 comm="apparmor_parser"
[ 213.777266] audit: type=1400 audit(1563460046.450:164): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=7987 comm="apparmor_parser"
[ 213.806094] audit: type=1400 audit(1563460046.478:165): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=7989 comm="apparmor_parser"
[ 214.023402] audit: type=1400 audit(1563460046.698:166): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=7996 comm="apparmor_parser"
[ 214.249378] audit: type=1400 audit(1563460046.922:167): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=7997 comm="apparmor_parser"
[ 217.426028] kauditd_printk_skb: 6 callbacks suppressed
[ 217.426031] audit: type=1400 audit(1563460050.097:174): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=8045 comm="apparmor_parser"
[ 217.427105] audit: type=1400 audit(1563460050.101:175): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=8045 comm="apparmor_parser"
[ 217.474226] audit: type=1400 audit(1563460050.145:176): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=8058 comm="apparmor_parser"
[ 217.661390] audit: type=1400 audit(1563460050.333:177): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=8059 comm="apparmor_parser"
[ 218.569433] audit: type=1400 audit(1563460051.241:178): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=8066 comm="apparmor_parser"
[ 218.675683] audit: type=1400 audit(1563460051.349:179): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=8080 comm="apparmor_parser"
[ 219.701889] audit: type=1400 audit(1563460052.373:180): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=8095 comm="apparmor_parser"
[ 219.702275] audit: type=1400 audit(1563460052.373:181): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=8095 comm="apparmor_parser"
[ 219.757793] audit: type=1400 audit(1563460052.429:182): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=8105 comm="apparmor_parser"
[ 219.971843] audit: type=1400 audit(1563460052.645:183): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=8106 comm="apparmor_parser"
[ 222.523869] kauditd_printk_skb: 5 callbacks suppressed
[ 222.523873] audit: type=1400 audit(1563460055.197:189): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=8175 comm="apparmor_parser"
[ 222.728254] audit: type=1400 audit(1563460055.401:190): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=8187 comm="apparmor_parser"
[ 223.733907] audit: type=1400 audit(1563460056.405:191): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=8188 comm="apparmor_parser"
[ 224.784095] audit: type=1400 audit(1563460057.457:192): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=8197 comm="apparmor_parser"
[ 224.784760] audit: type=1400 audit(1563460057.457:193): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=8197 comm="apparmor_parser"
[ 224.826324] audit: type=1400 audit(1563460057.497:194): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=8199 comm="apparmor_parser"
[ 225.052154] audit: type=1400 audit(1563460057.721:195): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=8200 comm="apparmor_parser"
[ 225.318439] audit: type=1400 audit(1563460057.989:196): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=8209 comm="apparmor_parser"
[ 226.429625] audit: type=1400 audit(1563460059.101:197): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=8210 comm="apparmor_parser"
[ 227.425033] audit: type=1400 audit(1563460060.097:198): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=8222 comm="apparmor_parser"
[ 227.663798] kauditd_printk_skb: 2 callbacks suppressed
[ 227.663801] audit: type=1400 audit(1563460060.337:201): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=8234 comm="apparmor_parser"
[ 227.909572] audit: type=1400 audit(1563460060.581:202): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=8241 comm="apparmor_parser"
[ 229.111362] audit: type=1400 audit(1563460061.785:203): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=8242 comm="apparmor_parser"
[ 230.176759] audit: type=1400 audit(1563460062.849:204): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine" pid=8253 comm="apparmor_parser"
[ 230.177422] audit: type=1400 audit(1563460062.849:205): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6673/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=8253 comm="apparmor_parser"
[ 230.226376] audit: type=1400 audit(1563460062.897:206): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=8256 comm="apparmor_parser"
[ 230.479017] audit: type=1400 audit(1563460063.153:207): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=8257 comm="apparmor_parser"
[ 231.817676] audit: type=1400 audit(1563460064.489:208): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=8267 comm="apparmor_parser"
[ 231.897293] audit: type=1400 audit(1563460064.569:209): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=8272 comm="apparmor_parser"
[ 236.988336] audit: type=1400 audit(1563460069.660:210): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=8362 comm="apparmor_parser"
[ 237.056827] audit: type=1400 audit(1563460069.728:211): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=8363 comm="apparmor_parser"
[ 239.406116] audit: type=1400 audit(1563460072.076:212): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=8385 comm="apparmor_parser"
[ 240.710862] audit: type=1400 audit(1563460073.384:213): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=8384 comm="apparmor_parser"
[ 242.475634] audit: type=1400 audit(1563460075.148:214): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=8412 comm="apparmor_parser"
[ 242.740228] audit: type=1400 audit(1563460075.412:215): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=8411 comm="apparmor_parser"
[ 243.992364] audit: type=1400 audit(1563460076.664:216): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=8421 comm="apparmor_parser"
[ 245.612371] audit: type=1400 audit(1563460078.284:217): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=8420 comm="apparmor_parser"
[ 247.521499] audit: type=1400 audit(1563460080.192:218): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=8429 comm="apparmor_parser"
[ 247.540366] audit: type=1400 audit(1563460080.212:219): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=8428 comm="apparmor_parser"
[ 249.424045] audit: type=1400 audit(1563460082.096:220): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=8438 comm="apparmor_parser"
[ 250.847690] audit: type=1400 audit(1563460083.520:221): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=8437 comm="apparmor_parser"
[ 253.251029] audit: type=1400 audit(1563460085.924:222): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=8446 comm="apparmor_parser"
[ 253.300976] audit: type=1400 audit(1563460085.972:223): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=8445 comm="apparmor_parser"
[ 254.640816] audit: type=1400 audit(1563460087.312:224): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=8454 comm="apparmor_parser"
[ 254.670236] audit: type=1400 audit(1563460087.340:225): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=8453 comm="apparmor_parser"
[ 255.988409] audit: type=1400 audit(1563460088.660:226): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=8463 comm="apparmor_parser"
[ 256.381061] audit: type=1400 audit(1563460089.052:227): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=8462 comm="apparmor_parser"
[ 257.646083] audit: type=1400 audit(1563460090.316:228): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=8471 comm="apparmor_parser"
[ 259.270179] audit: type=1400 audit(1563460091.940:229): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=8470 comm="apparmor_parser"
[ 260.524981] audit: type=1400 audit(1563460093.196:230): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=8479 comm="apparmor_parser"
[ 262.268146] audit: type=1400 audit(1563460094.940:231): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=8478 comm="apparmor_parser"
[ 263.749391] audit: type=1400 audit(1563460096.420:232): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=8490 comm="apparmor_parser"
[ 265.365638] audit: type=1400 audit(1563460098.036:233): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=8489 comm="apparmor_parser"
[ 610.770768] usb 1-5: new high-speed USB device number 5 using ehci-pci
[ 610.927782] usb 1-5: New USB device found, idVendor=1bbb, idProduct=af2a, bcdDevice= 2.25
[ 610.927786] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 610.927788] usb 1-5: Product: Android
[ 610.927789] usb 1-5: Manufacturer: Android
[ 610.927791] usb 1-5: SerialNumber: 6bf9c4dc
[ 1248.196467] usb 1-5: USB disconnect, device number 5
[16427.202294] perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
Hors ligne
#22 Le 18/07/2019, à 22:14
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
Ci-dessus le retour de dmesg depuis le live USB.
Je dirais que manifestement il y a des problèmes.
Hors ligne
#23 Le 18/07/2019, à 22:26
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
[ 15.530743] ata2: softreset failed (device not ready)
[ 15.530807] ata3: softreset failed (device not ready)
[ 15.530864] ata1: softreset failed (device not ready)
puis :
[ 15.750764] ata1.00: exception Emask 0x50 SAct 0x18000000 SErr 0x680900 action 0x6 frozen
[ 15.750810] ata1.00: irq_stat 0x08000000, interface fatal error
[ 15.750851] ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 15.750892] ata1.00: failed command: READ FPDMA QUEUED
[ 15.750934] ata1.00: cmd 60/ff:d8:00:44:79/00:00:06:00:00/40 tag 27 ncq dma 130560 in
res 40/00:e0:ff:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 15.750977] ata1.00: status: { DRDY }
[ 15.751016] ata1.00: failed command: READ FPDMA QUEUED
[ 15.751059] ata1.00: cmd 60/01:e0:ff:44:79/00:00:06:00:00/40 tag 28 ncq dma 512 in
res 40/00:e0:ff:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 15.751105] ata1.00: status: { DRDY }
[ 15.751150] ata1: hard resetting link
[ 15.834737] ata4: softreset failed (device not ready)
ensuite :
[ 16.226745] ata1: softreset failed (device not ready)
[ 16.387092] print_req_error: I/O error, dev sda, sector 108610560 flags 84700
[ 16.387181] print_req_error: I/O error, dev sda, sector 108610815 flags 80700
[ 16.418750] ata1.00: exception Emask 0x50 SAct 0x8000300 SErr 0x680900 action 0x6 frozen
[ 16.418750] ata1.00: exception Emask 0x50 SAct 0x8000300 SErr 0x680900 action 0x6 frozen
[ 16.418814] ata1.00: irq_stat 0x08000000, interface fatal error
[ 16.418859] ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 16.418909] ata1.00: failed command: READ FPDMA QUEUED
[ 16.418950] ata1.00: cmd 60/f0:40:10:49:39/00:00:0a:00:00/40 tag 8 ncq dma 122880 in
res 40/00:48:10:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 16.419061] ata1.00: status: { DRDY }
[ 16.419089] ata1.00: failed command: READ FPDMA QUEUED
[ 16.419131] ata1.00: cmd 60/08:48:10:44:79/00:00:06:00:00/40 tag 9 ncq dma 4096 in
res 40/00:48:10:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 16.419239] ata1.00: status: { DRDY }
[ 16.419267] ata1.00: failed command: READ FPDMA QUEUED
[ 16.419309] ata1.00: cmd 60/f8:d8:00:46:39/00:00:0a:00:00/40 tag 27 ncq dma 126976 in
res 40/00:48:10:44:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 16.419419] ata1.00: status: { DRDY }
[ 16.419450] ata1: hard resetting link
[ 16.894742] ata1: softreset failed (device not ready)
[ 17.055066] print_req_error: I/O error, dev sda, sector 171526416 flags 80700
[ 17.055158] print_req_error: I/O error, dev sda, sector 171525632 flags 80700
[ 17.055227] ata1: EH complete
[ 17.098744] ata1.00: exception Emask 0x50 SAct 0x18000000 SErr 0x680900 action 0x6 frozen
[ 17.098815] ata1.00: irq_stat 0x08000000, interface fatal error
[ 17.098860] ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 17.098910] ata1.00: failed command: READ FPDMA QUEUED
[ 17.098952] ata1.00: cmd 60/ff:d8:00:48:f9/00:00:0d:00:00/40 tag 27 ncq dma 130560 in
res 40/00:e0:ff:48:f9/00:00:0d:00:00/40 Emask 0x50 (ATA bus error)
[ 17.099063] ata1.00: status: { DRDY }
[ 17.099092] ata1.00: failed command: READ FPDMA QUEUED
[ 17.099133] ata1.00: cmd 60/01:e0:ff:48:f9/00:00:0d:00:00/40 tag 28 ncq dma 512 in
res 40/00:e0:ff:48:f9/00:00:0d:00:00/40 Emask 0x50 (ATA bus error)
[ 17.099241] ata1.00: status: { DRDY }
[ 17.363295] sd 6:0:0:0: [sdd] No Caching mode page found
[ 17.363341] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 17.574741] ata1: softreset failed (device not ready)
[ 17.735044] print_req_error: I/O error, dev sda, sector 234440704 flags 84700
[ 17.735123] print_req_error: I/O error, dev sda, sector 234440959 flags 80700
[ 18.530756] ata1.00: exception Emask 0x50 SAct 0xc0 SErr 0x680900 action 0x6 frozen
[ 18.530760] ata1.00: irq_stat 0x08000000, interface fatal error
[ 18.530763] ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 18.530766] ata1.00: failed command: READ FPDMA QUEUED
[ 18.530772] ata1.00: cmd 60/80:30:00:47:79/00:00:06:00:00/40 tag 6 ncq dma 65536 in
res 40/00:38:88:47:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 18.530774] ata1.00: status: { DRDY }
[ 18.530777] ata1.00: failed command: READ FPDMA QUEUED
[ 18.530782] ata1.00: cmd 60/68:38:88:47:79/00:00:06:00:00/40 tag 7 ncq dma 53248 in
res 40/00:38:88:47:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 18.530784] ata1.00: status: { DRDY }
[ 18.530788] ata1: hard resetting link
[ 19.006741] ata1: softreset failed (device not ready)
[ 19.167080] print_req_error: I/O error, dev sda, sector 108611328 flags 80700
[ 19.167114] print_req_error: I/O error, dev sda, sector 108611464 flags 80700
Ça fait un paquet d'erreurs !!!
Des idées ?
Dernière modification par Carroués (Le 18/07/2019, à 22:27)
Hors ligne
#24 Le 18/07/2019, à 22:28
- Carroués
Re : [Résolu] - Mon PC ne démarre plus !
À tout hasard, j'ai changé d'imprimante la semaine dernière : un lien possible ?
Hors ligne
#25 Le 19/07/2019, à 10:49
- inbox
Re : [Résolu] - Mon PC ne démarre plus !
Tu as, semble t-il oublié de préciser que ton système utilise du RAID :
[ 181.214780] raid6: sse2x4 gen() 3323 MB/s
[ 181.262733] raid6: sse2x4 xor() 1917 MB/s
[ 181.310742] raid6: sse2x2 gen() 3173 MB/s
[ 181.358725] raid6: sse2x2 xor() 2715 MB/s
[ 181.406748] raid6: sse2x1 gen() 2662 MB/s
[ 181.454727] raid6: sse2x1 xor() 2426 MB/s
[ 181.454728] raid6: using algorithm sse2x4 gen() 3323 MB/s
[ 181.454729] raid6: .... xor() 1917 MB/s, rmw enabled
[ 181.454730] raid6: using intx1 recovery algorithm
[ 181.463043] xor: measuring software checksum speed
[ 181.502722] prefetch64-sse: 6158.000 MB/sec
[ 181.542723] generic_sse: 6132.000 MB/sec
[ 181.542724] xor: using function: prefetch64-sse (6158.000 MB/sec)
Tu confirmes ?
Ensuite, comme tu l'as remarqué, l'un de tes disques durs (le sda) a un problème :
[ 17.574741] ata1: softreset failed (device not ready)
[ 17.574791] ata1: applying PMP SRST workaround and retrying
[ 17.734748] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 17.734879] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 17.735011] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 17.735014] ata1.00: configured for UDMA/133
[ 17.735033] sd 0:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 17.735036] sd 0:0:0:0: [sda] tag#27 Sense Key : Illegal Request [current]
[ 17.735038] sd 0:0:0:0: [sda] tag#27 Add. Sense: Unaligned write command
[ 17.735042] sd 0:0:0:0: [sda] tag#27 CDB: Read(10) 28 00 0d f9 48 00 00 00 ff 00
[ 17.735044] print_req_error: I/O error, dev sda, sector 234440704 flags 84700
[ 17.735115] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 17.735118] sd 0:0:0:0: [sda] tag#28 Sense Key : Illegal Request [current]
[ 17.735120] sd 0:0:0:0: [sda] tag#28 Add. Sense: Unaligned write command
[ 17.735122] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 0d f9 48 ff 00 00 01 00
[ 17.735123] print_req_error: I/O error, dev sda, sector 234440959 flags 80700
[ 17.735192] ata1: EH complete
[ 17.743977] sdd: sdd1
[ 17.746761] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 18.530751] ata1: limiting SATA link speed to 1.5 Gbps
[ 18.530756] ata1.00: exception Emask 0x50 SAct 0xc0 SErr 0x680900 action 0x6 frozen
[ 18.530760] ata1.00: irq_stat 0x08000000, interface fatal error
[ 18.530763] ata1: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 18.530766] ata1.00: failed command: READ FPDMA QUEUED
[ 18.530772] ata1.00: cmd 60/80:30:00:47:79/00:00:06:00:00/40 tag 6 ncq dma 65536 in
res 40/00:38:88:47:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 18.530774] ata1.00: status: { DRDY }
[ 18.530777] ata1.00: failed command: READ FPDMA QUEUED
[ 18.530782] ata1.00: cmd 60/68:38:88:47:79/00:00:06:00:00/40 tag 7 ncq dma 53248 in
res 40/00:38:88:47:79/00:00:06:00:00/40 Emask 0x50 (ATA bus error)
[ 18.530784] ata1.00: status: { DRDY }
[ 18.530788] ata1: hard resetting link
[ 19.006741] ata1: softreset failed (device not ready)
[ 19.006747] ata1: applying PMP SRST workaround and retrying
[ 19.166763] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 19.166905] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 19.167044] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 19.167048] ata1.00: configured for UDMA/133
[ 19.167068] sd 0:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 19.167071] sd 0:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current]
[ 19.167074] sd 0:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
[ 19.167078] sd 0:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 06 79 47 00 00 00 80 00
[ 19.167080] print_req_error: I/O error, dev sda, sector 108611328 flags 80700
[ 19.167106] sd 0:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 19.167108] sd 0:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current]
[ 19.167111] sd 0:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
[ 19.167113] sd 0:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 06 79 47 88 00 00 68 00
[ 19.167114] print_req_error: I/O error, dev sda, sector 108611464 flags 80700
Vu que ce SSD est récent, je te conseille, dans un 1er temps, de vérifier la connectique. Si possible, remplace le cale Sata de ce disque. Ensuite, tu teste voir si ton PC démarre.
Bien entendu, et vu le nombre de disques durs, tu as des sauvegardes à jour.
Dernière modification par inbox (Le 19/07/2019, à 10:50)
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
En ligne