#1 Le 23/07/2019, à 11:57
- loutch
[résolu]Xubuntu 18.04 Rien juste la souris
Hello
Ayant installé xubuntu 18.04 lts a coté de ma xubuntu 18.10 ,après le démarrage je n'ais que le fond d'ecran et le curseur de la souris . La clé usb live fonctionnait au poil (a part que c'était de l'english )
Comment se fait-il que le live tourne niquel et une fois installée la 18.04 ne donne rien
@+
Ps en recovery mode j'ai la main .
Dernière modification par loutch (Le 23/07/2019, à 20:26)
Hors ligne
#2 Le 23/07/2019, à 12:50
- Bwice
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Bonjours, même si la clef fonctionnait en Live, as-tu vérifier l'intégrité de ton image? J'ai déjà eu le cas d'une image qui marchait en Live, mais qui plantait a l'install (sur certain PC uniquement !).
De plus pourrais-tu faire un Boot info pour aider à localiser le problème?
Cordialement.
Ubuntu-Mate 18.04 LTS 64-bit Debian Buster | HP-Pavilion-15-Notebook-PC | AMD A4-6210 apu with amd radeon r3 graphics × 4
Upgrade => 1x Crucial SO-DIMM DDR3L 8 Go 1600 MHz 1,35 Volts | SSD Corsair Force Series LE - 480 Go SATA 3 (6 Gb/s)
Hors ligne
#3 Le 23/07/2019, à 15:02
- loutch
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Bonjour
oui verifié l'iso (elle s'installe et fonctionne en vb)
le bootinfo
Hors ligne
#4 Le 23/07/2019, à 15:50
- malbo
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Bonjour,
C'est quoi le nom complet du modèle de ton ordi et son fabricant ?
Hors ligne
#5 Le 23/07/2019, à 16:43
- loutch
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Re
Asus rog gl704gm-evo13t
mfd2018-09
Hors ligne
#6 Le 23/07/2019, à 17:13
- NicoApi73
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Bonjour,
Je n'ai pas trouvé le 13t, mais le 27t. Ce dernier a une carte graphique basée sur un chipset nvidia, ne serait ce pas ton cas également?
Hors ligne
#7 Le 23/07/2019, à 17:44
- loutch
Re : [résolu]Xubuntu 18.04 Rien juste la souris
re
Oui c'est du nvidia gtx1060. (pourtant la 18.10 fonctionne au poil)
Dernière modification par loutch (Le 23/07/2019, à 17:45)
Hors ligne
#8 Le 23/07/2019, à 18:14
- NicoApi73
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Le fonctionnement de nouveau (le driver libre qui gère les cartes nvidia) est assez aléatoire sur les cartes récentes (ou assez récentes)
Boote en passant le paramètre modprobe.blacklist=nouveau et installe le driver propriétaire nvidia. Ca devrait régler le problème.
Hors ligne
#9 Le 23/07/2019, à 18:59
- malbo
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Tu as écrit un O au lieu d'un Zéro. Le nom exact de ton modèle est GL704GM-EV013T et on peut le voir sur cette page de la fnac : https://www.fnac.com/mp38899473/ASUS-RO … -fonce/w-4
On y trouve bien la carte graphique NVIDIA GeForce GTX 1060.
On y trouve également le SSD NVME de 256 Go et le disque dur de 1 To qu'on peut voir dans le Boot-Info dont tu as donné le lien dans le post #3 (je le colle ci-dessous pour éviter qu'il se perde) :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,953,523,711 1,953,521,664 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/nvme0n1
/dev/nvme0n1p1 30A1-BC18 vfat
/dev/nvme0n1p2 36863a7f-af60-436b-ba6a-cba2a31f6d83 ext4
/dev/nvme0n1p3 acd90739-e277-4129-9ef9-b11b829a272e ext4
/dev/nvme0n1p4 7e25053a-4fa4-4456-af80-b6562350857d swap
/dev/nvme0n1p5 14c28f5f-8f52-41e3-bed0-e7f62ac8fb61 ext4
/dev/nvme0n1p6 eb47cb1f-7c4b-482e-8c39-4e8b3e6454c1 ext4
/dev/sda1 9d01359b-9705-43f9-be12-4d6d7f28b12b ext4 DATA
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 23 14:47 ata-ST1000LM035-1RK172_ZDEBDLTQ -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 23 14:47 ata-ST1000LM035-1RK172_ZDEBDLTQ-part1 -> ../../sda1
lrwxrwxrwx 1 root root 13 Jul 23 14:47 nvme-WDC_PC_SN520_SDAPNUW-256G-1002_183383423416 -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-WDC_PC_SN520_SDAPNUW-256G-1002_183383423416-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-WDC_PC_SN520_SDAPNUW-256G-1002_183383423416-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-WDC_PC_SN520_SDAPNUW-256G-1002_183383423416-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-WDC_PC_SN520_SDAPNUW-256G-1002_183383423416-part4 -> ../../nvme0n1p4
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-WDC_PC_SN520_SDAPNUW-256G-1002_183383423416-part5 -> ../../nvme0n1p5
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-WDC_PC_SN520_SDAPNUW-256G-1002_183383423416-part6 -> ../../nvme0n1p6
lrwxrwxrwx 1 root root 13 Jul 23 14:47 nvme-eui.1833834234160001001b444a4440c18c -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-eui.1833834234160001001b444a4440c18c-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-eui.1833834234160001001b444a4440c18c-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-eui.1833834234160001001b444a4440c18c-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-eui.1833834234160001001b444a4440c18c-part4 -> ../../nvme0n1p4
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-eui.1833834234160001001b444a4440c18c-part5 -> ../../nvme0n1p5
lrwxrwxrwx 1 root root 15 Jul 23 14:47 nvme-eui.1833834234160001001b444a4440c18c-part6 -> ../../nvme0n1p6
lrwxrwxrwx 1 root root 9 Jul 23 14:47 wwn-0x5000c500b2177eee -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 23 14:47 wwn-0x5000c500b2177eee-part1 -> ../../sda1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/nvme0n1p1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/nvme0n1p5 / ext4 (rw,relatime,errors=remount-ro)
/dev/nvme0n1p6 /home ext4 (rw,relatime)
ADDITIONAL INFORMATION :
=================== log of boot-info 20190723_1447 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.18.0-25-generic root=UUID=14c28f5f-8f52-41e3-bed0-e7f62ac8fb61 ro recovery nomodeset
=================== os-prober:
/dev/nvme0n1p5:L'OS actuellement utilisé - Ubuntu 18.04.2 LTS CurrentSession:linux
/dev/nvme0n1p3:Ubuntu 18.10 (18.10):Ubuntu:linux
=================== blkid:
/dev/nvme0n1p1: UUID="30A1-BC18" TYPE="vfat" PARTUUID="7b1efec3-ae6b-4d01-89fe-9de0a635d7c8"
/dev/nvme0n1p2: UUID="36863a7f-af60-436b-ba6a-cba2a31f6d83" TYPE="ext4" PARTUUID="31e81ab6-6685-4971-8e9e-246e6be8019e"
/dev/nvme0n1p3: UUID="acd90739-e277-4129-9ef9-b11b829a272e" TYPE="ext4" PARTUUID="48b34e2c-19f9-438d-a3bd-1a29a809da2c"
/dev/nvme0n1p4: UUID="7e25053a-4fa4-4456-af80-b6562350857d" TYPE="swap" PARTUUID="fe3c2529-b3b1-4689-8d54-28b682e5d5f3"
/dev/nvme0n1p5: UUID="14c28f5f-8f52-41e3-bed0-e7f62ac8fb61" TYPE="ext4" PARTUUID="7529a549-316c-451f-8f1d-ec97555136b7"
/dev/nvme0n1p6: UUID="eb47cb1f-7c4b-482e-8c39-4e8b3e6454c1" TYPE="ext4" PARTUUID="25cd072b-74b5-4671-af2a-83dc3593feee"
/dev/sda1: LABEL="DATA" UUID="9d01359b-9705-43f9-be12-4d6d7f28b12b" TYPE="ext4" PARTUUID="bd3c400c-7a1e-4bfb-99f0-f98f0c08ee7b"
/dev/nvme0n1: PTUUID="0ccaad73-74bd-4bed-bca7-bbb99b8e9130" PTTYPE="gpt"
1 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 23 10:09 grub.d
total 80
-rwxr-xr-x 1 root root 10046 févr. 8 00:20 00_header
-rwxr-xr-x 1 root root 6258 févr. 4 20:10 05_debian_theme
-rwxr-xr-x 1 root root 12693 févr. 8 00:20 10_linux
-rwxr-xr-x 1 root root 11298 févr. 8 00:20 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 févr. 8 00:20 30_os-prober
-rwxr-xr-x 1 root root 1418 févr. 8 00:20 30_uefi-firmware
-rwxr-xr-x 1 root root 214 févr. 8 00:20 40_custom
-rwxr-xr-x 1 root root 216 févr. 8 00:20 41_custom
-rw-r--r-- 1 root root 483 févr. 8 00:20 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of nvme0n1p5: UUID=30A1-BC18 (nvme0n1p1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/mmx64.efi
=================== nvme0n1p3/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 5 09:22 grub.d
total 80
-rwxr-xr-x 1 root root 10627 févr. 5 17:05 00_header
-rwxr-xr-x 1 root root 6258 oct. 17 2018 05_debian_theme
-rwxr-xr-x 1 root root 13716 oct. 17 2018 10_linux
-rwxr-xr-x 1 root root 11495 oct. 17 2018 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 oct. 17 2018 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 17 2018 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 17 2018 40_custom
-rwxr-xr-x 1 root root 216 oct. 17 2018 41_custom
-rw-r--r-- 1 root root 483 oct. 17 2018 README
=================== nvme0n1p3/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of nvme0n1p3: UUID=30A1-BC18 (nvme0n1p1)
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : command substitution: ignored null byte in input
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0002,0001
Boot0000* ubuntu HD(1,GPT,7b1efec3-ae6b-4d01-89fe-9de0a635d7c8,0x800,0x1c000)/File(EFIUBUNTUSHIMX64.EFI)
Boot0001* Windows Boot Manager VenHw(99e275e7-75a0-4b37-a2e6-c5385e6c00cb)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* debian HD(1,GPT,7b1efec3-ae6b-4d01-89fe-9de0a635d7c8,0x800,0x1c000)/File(EFIDEBIANGRUBX64.EFI)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
nvme0n1p5 : nvme0n1, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, .
nvme0n1p1 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
nvme0n1p2 : nvme0n1, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/nvme0n1p2.
nvme0n1p3 : nvme0n1, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/nvme0n1p3.
nvme0n1p6 : nvme0n1, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /home.
sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda1.
nvme0n1 : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sda : GPT, no-BIOS_boot, has-no-EFIpart, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000LM035-1RK1:;
1:1049kB:1000GB:1000GB:ext4::;
BYT;
/dev/nvme0n1:256GB:nvme:512:512:gpt:WDC PC SN520 SDAPNUW-256G-1002:;
1:1049kB:59.8MB:58.7MB:fat32::boot, esp;
2:59.8MB:20.1GB:20.0GB:ext4::;
3:20.1GB:50.1GB:30.0GB:ext4::;
4:50.1GB:67.1GB:17.0GB:linux-swap(v1)::;
5:67.1GB:87.1GB:20.0GB:ext4::;
6:87.1GB:102GB:15.0GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 931,5G
sda1 part ext4 931,5G DATA
nvme0n1 disk 238,5G
nvme0n1p1 part vfat 56M
nvme0n1p2 part ext4 18,6G
nvme0n1p3 part ext4 28G
nvme0n1p4 part swap 15,9G
nvme0n1p5 part ext4 18,6G
nvme0n1p6 part ext4 14G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
nvme0n1 0 0 0 live
nvme0n1p1 0 0 0 /boot/efi
nvme0n1p2 0 0 0 /mnt/boot-sav/nvme0n1p2
nvme0n1p3 0 0 0 /mnt/boot-sav/nvme0n1p3
nvme0n1p4 0 0 0 [SWAP]
nvme0n1p5 0 0 0 /
nvme0n1p6 0 0 0 /home
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=8113456k,nr_inodes=2028364,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1627216k,mode=755)
/dev/nvme0n1p5 on / type ext4 (rw,relatime,errors=remount-ro)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=32,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=17460)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/nvme0n1p1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/nvme0n1p6 on /home type ext4 (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=1627212k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/nvme0n1p2 on /mnt/boot-sav/nvme0n1p2 type ext4 (rw,relatime)
/dev/nvme0n1p3 on /mnt/boot-sav/nvme0n1p3 type ext4 (rw,relatime)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime)
=================== ls:
/sys/block/nvme0n1 (filtered): alignment_offset bdi capability dev device discard_alignment eui ext_range hidden holders inflight integrity mq nguid nsid nvme0n1p1 nvme0n1p2 nvme0n1p3 nvme0n1p4 nvme0n1p5 nvme0n1p6 power queue range removable ro size slaves stat subsystem trace uevent uuid wwid
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/dev (filtered): acpi_thermal_rel autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hidraw5 hpet hugepages hwrng i2c-0 i2c-1 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null nvme0 nvme0n1 nvme0n1p1 nvme0n1p2 nvme0n1p3 nvme0n1p4 nvme0n1p5 nvme0n1p6 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/nvme0n1p1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 01 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 20 00 40 00 00 08 00 00 |........ .@.....|
00000020 00 c0 01 00 72 03 00 00 00 00 00 00 02 00 00 00 |....r...........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 18 bc a1 30 4e 4f 20 4e 41 4d 45 20 20 |..)...0NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs tmpfs 1.6G 1.6M 1.6G 1% /run
/dev/nvme0n1p5 ext4 19G 5.1G 13G 30% /
tmpfs tmpfs 7.8G 15M 7.8G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
/dev/nvme0n1p1 vfat 56M 11M 45M 20% /boot/efi
/dev/nvme0n1p6 ext4 14G 79M 13G 1% /home
tmpfs tmpfs 1.6G 12K 1.6G 1% /run/user/1000
/dev/nvme0n1p2 ext4 19G 4.1G 14G 24% /mnt/boot-sav/nvme0n1p2
/dev/nvme0n1p3 ext4 28G 13G 14G 50% /mnt/boot-sav/nvme0n1p3
/dev/sda1 ext4 916G 86G 785G 10% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/nvme0n1: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 0CCAAD73-74BD-4BED-BCA7-BBB99B8E9130
Device Start End Sectors Size Type
/dev/nvme0n1p1 2048 116735 114688 56M EFI System
/dev/nvme0n1p2 116736 39178239 39061504 18.6G Linux filesystem
/dev/nvme0n1p3 39178240 97771519 58593280 28G Linux filesystem
/dev/nvme0n1p4 97771520 130973695 33202176 15.9G Linux swap
/dev/nvme0n1p5 130973696 170035199 39061504 18.6G Linux filesystem
/dev/nvme0n1p6 170035200 199331839 29296640 14G Linux filesystem
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 9ED1DC55-ED2B-4E64-B9B7-4903C41498C6
Device Start End Sectors Size Type
/dev/sda1 2048 1953523711 1953521664 931.5G Linux filesystem
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of nvme0n1p5, using the following options: nvme0n1p1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier nvme0n1p1/efi/.../grub*.efi !
=================== User settings
The settings chosen by the user will not act on the boot.
Dernière modification par malbo (Le 23/07/2019, à 19:00)
Hors ligne
#10 Le 23/07/2019, à 20:15
- loutch
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Bonsoir
Le fonctionnement de nouveau (le driver libre qui gère les cartes nvidia) est assez aléatoire sur les cartes récentes (ou assez récentes)
Boote en passant le paramètre modprobe.blacklist=nouveau et installe le driver propriétaire nvidia. Ca devrait régler le problème.
T'es un chef ça fonctionne juste en installant le driver nvidia . plusieur redémarrage ça fonctionne.
Dois-je quand-même ajouter modprobe.blacklist=nouveau ?
Si oui le mettre où ( j'ai pas l'habitude d'ubuntu)????
@+
Hors ligne
#11 Le 23/07/2019, à 20:24
- NicoApi73
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Pas besoin, l'installation du driver nvidia blackliste automatiquement nouveau.
Hors ligne
#12 Le 23/07/2019, à 20:25
- loutch
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Ok
encore MERCI
Reste plus qu'a customizer tout ça .
@+
Hors ligne
#13 Le 24/07/2019, à 06:49
- malbo
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Bonjour,
Je viens d'ajouter ton modèle GL704GM-EV013T dans la Liste des portables « Asus ». Pour mémoire, ce modèle qui est visible sur cette page de la fnac, est équipé d'un processeur Intel Core i7-8750H et d'une carte graphique dédiée NVIDIA GeForce GTX 1060
Hors ligne
#14 Le 24/07/2019, à 21:06
- loutch
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Bonsoir
Bonjour,
Je viens d'ajouter ton modèle GL704GM-EV013T dans la Liste des portables « Asus ». Pour mémoire, ce modèle qui est visible sur cette page de la fnac, est équipé d'un processeur Intel Core i7-8750H et d'une carte graphique dédiée NVIDIA GeForce GTX 1060
Si l'installation se passe bien et qu'une fois installé le driver proprio "ça roxe du poney" ,faut quand même mettre la main dans le camboui certaine touche du clavier ne fonctionne pas .
@+
Dernière modification par loutch (Le 24/07/2019, à 21:08)
Hors ligne
#15 Le 25/07/2019, à 05:49
- malbo
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Si l'installation se passe bien et qu'une fois installé le driver proprio "ça roxe du poney" ,faut quand même mettre la main dans le camboui certaine touche du clavier ne fonctionne pas
Si tu peux donner dans la présente discussion des infos et des solutions pour ce problème de touche du clavier (et peut-être pour d'autres problèmes que tu pourrais découvrir), fais-le parce que ça sera utile à quelqu'un qui a le même modèle d'ordi ou un modèle approchant.
Dernière modification par malbo (Le 25/07/2019, à 05:49)
Hors ligne
#16 Le 25/07/2019, à 08:38
- loutch
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Bonjour
Pour la luminosité de l'écran
j' utilise Indicator-Brightness,
ouvrir un terminal et lancez les commandes suivantes :
sudo add-apt-repository ppa:indicator-brightness/ppa
sudo apt-get update
sudo apt-get install indicator-brightness
terminal pour le lancer
/opt/extras.ubuntu.com/indicator-brightness/indicator-brightness
clic sur l'icone et choisir 0 écran noir 15 écran complètement lumineux
Puis ajouter des raccourcis personnalisés pour contrôler la luminosité de l'écran:
Ouvrir les Paramètres du système et accédez à «Clavier -> onglet Raccourcis -> Raccourcis personnalisés» .
Cliquer sur le signe plus pour ajouter deux nouveaux raccourcis (J'ai pris les touches dédiées f7 et f8 )avec:
nom: Luminosité augmenter
commande:
/opt/extras.ubuntu.com/indicator-brightness/indicator-brightness-adjust --up
nom: luminosité diminuer
commande:
/opt/extras.ubuntu.com/indicator-brightness/indicator-brightness-adjust --down
Sur ce portable il ni a pas de petite lumière pour le verrouillage du pavé numérique donc je me suis fait un petit conky
(fait aussi Min et Maj et indicateur de bureau)
minuscule ou Majuscule
Pave numérique
numéro du bureau
conkyrc
conky.config = {
background = false,
use_xft = true,
font = 'Liberation Sans:size=12',
xftalpha = 0.8,
update_interval = 1.0,
total_run_times = 0,
own_window = true,
own_window_transparent = true,
--own_window_color 000000
own_window_argb_visual = true,
--own_window_argb_value = 250,
own_window_type = 'normal',
own_window_hints = 'undecorated,below,sticky,skip_taskbar,skip_pager',
double_buffer = true,
minimum_width = 20, minimum_height = 20,
maximum_width = 60,
text_buffer_size = 2048,
draw_shades = false,
draw_outline = false,
draw_borders = false,
draw_graph_borders = false,
default_color = 'white',
default_outline_color = 'white',
alignment = 'bottom_right',
gap_x = 10,
gap_y = 00,
no_buffers = true,
uppercase = false,
cpu_avg_samples = 2,
override_utf8_locale = true,
imlib_cache_flush_interval = 60,
imlib_cache_size = 10000,
-- Taille des pointillés
stippled_borders = 5,
-- Couleurs
default_color = '#ffffff',--ffd579
default_shade_color = '#333333',
default_outline_color = 'black',
lua_load = '~/.conky/lua/image.lua',
color1 = 'green',
color2 = 'red',
color3 = '828200',
color4 = '323200',
};
conky.text = [[
${execPi 2 ~/.conky/clavier/caps_num.sh}
${goto 10}${color ffffff}B${desktop}
]];
caps_num.sh
#!/bin/bash
caps=$(xset -q | grep -c "Caps Lock: on")
num=$(xset -q | grep -c "Num Lock: on")
function bottom_align(){
if [ $caps -gt 0 ]; then
echo "\${color red} Maj\${color}"
else
echo " min"
fi
if [ $num -gt 0 ]; then
echo "\${color 6495ee} Num${color}"
else
echo " nv"
fi
}
function top_align(){
if [ $caps -gt 0 ]; then
echo -n "\${color red} Maj\${color}"
else
echo -n " min "
fi
if [ $num -gt 0 ]; then
echo "\${color 6495ee} Num${color}"
else
echo " nv"
fi
}
#check alignment
alignbl=$(grep "alignment bottom_left" ~/.conky/clavier/conkyrc|grep -c "#")
alignbr=$(grep "alignment bottom_right" ~/.conky/clavier/conkyrc|grep -c "#")
if [ $alignbl -gt 0 ] && [ $alignbr -gt 0 ]; then
top_align
else
bottom_align
fi
je cherche encore pour la luminosité du clavier
@+
Dernière modification par loutch (Le 25/07/2019, à 08:39)
Hors ligne
#17 Le 18/02/2020, à 23:36
- amdfx16
Re : [résolu]Xubuntu 18.04 Rien juste la souris
Re
Asus rog gl704gm-evo13t
mfd2018-09
Bonsoir,
Je suis tout nouveau dans ce forum, j'espère ne pas être trop hors sujet et ne pas trop déterrer le sujet.
En regardant sur la page des compatibilités : https://doc.ubuntu-fr.org/liste_portables_asus#gl, j'ai vu que le modèle GL704GM était compatible et qu'il renvoyait vers ce post.
Je suis à la recherche d'une solution sur ce modèle, j'ai essayé à maintes reprises d'installer Ubuntu (18.04 et 19.10), tout ceci avec succès mais avec un immense problème : les ventilateurs tournent à 100%.
J'ai épluché pas mal de forums mais je ne trouve pas de solution ^^ à priori d'autres utilisateurs ont le même problème.
J'ai vu que tu avais le même PC que moi, as-tu aussi ce problème ?
Hors ligne