#1 Le 12/09/2019, à 21:58
- stef_god
problème installation Ubuntu sur DELL precision 5520
Bonsoir,
Je possède un laptop DELL precision 5520 avec 2 disques.
Un SSD 256 MB sur lequel est installé Windows 10 et 1 disque 1TB pour les données sous Windows.
Sous Windows j'ai partitionné le disque de 1TB pour installé Ubuntu dessus.
J'ai crée une image de Ubuntu 19.04 sur une clé USB à l'aide de Rufus.
J'ai modifié le Bios pour un boot sur la clé USB.
Dans Type d'installation de la documentation, il n'y a pas de proposition de dual boot car Windows 'est pas détecté.
Je choisi l'option "autre chose" pour partitionner le disque dur.
A cette étape il n'y a que le disque de 1TB de visible, pas le SSD.
Je partitionne avec un swap et une racine et termine l'installation.
Au redémarrage Ubuntu démarre sans autre choix.
Je retourne dans le Bios, dans le boot sequence Ubuntu est en premier puis USB et Windows.
Je place Windows en premier et le pc redémarre sous Windows.
Quelle étape de préparation avant l'installation de Ubuntu ai-je oublié?
Cela pourrait-il être un problème de configuration du Bios?
Merci,
Stéphane
Hors ligne
#2 Le 12/09/2019, à 22:16
- ikewdu
Re : problème installation Ubuntu sur DELL precision 5520
Salut,
Depuis Ubuntu, fais un rapport boot-info : https://doc.ubuntu-fr.org/tutoriel/boot … stallation
Hors ligne
#3 Le 12/09/2019, à 22:38
- GammaDraconis
Re : problème installation Ubuntu sur DELL precision 5520
Oui c'est un réglage dans le bios que tu dois changer, je peux souviens plus du nom de l'option mais j'ai déjà eu cette situation sur un pc un coup et il fallait modifier un réglage dans le bios pour que le SSD soit visible depuis l'installeur d'Ubuntu.
N'oublie pas aussi de désactiver le Secure Boot mais ça je pense que c'est déjà fait mais vérifie quand même au cas ou.
Discussion sur mon script de post-install pour Ubuntu 20.04LTS : https://forum.ubuntu-fr.org/viewtopic.php?id=2026344
Lien direct script : https://github.com/simbd/Ubuntu_20.04LTS_PostInstall
Démo vidéo (peertube) : https://video.ploud.fr/videos/watch/fb7 … 0d252ed2db
Hors ligne
#4 Le 12/09/2019, à 22:50
- stef_god
Re : problème installation Ubuntu sur DELL precision 5520
Ok voila boot -info
http://paste.ubuntu.com/p/8kx3H44ZhD/
Oui le secure boot est déactivé.
Hors ligne
#5 Le 12/09/2019, à 22:58
- geole
Re : problème installation Ubuntu sur DELL precision 5520
Bonsoir
Il est probable que le SSD soit un NVMe. Vérifie comment le BIOS accède au SSD probablement en RAIDS => https://doc.ubuntu-fr.org/cohabitation_ubuntu_windows
A mon humble avis, cela serait dommages de modifier quelque chose qui impacterait négativement windows si tu t'en sers souvent.
sauf si tu trouves trop compliqué le choix du dual boot par le bios
Dernière modification par geole (Le 12/09/2019, à 23:06)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#6 Le 12/09/2019, à 23:09
- ikewdu
Re : problème installation Ubuntu sur DELL precision 5520
Re,
Perso, je ne sais pas régler ton problème. Le ssd n'est pas vu par Ubuntu.... Ton cas n'est pas commun.
Hors ligne
#7 Le 12/09/2019, à 23:43
- stef_god
Re : problème installation Ubuntu sur DELL precision 5520
Oui c'est le soucis que Ubuntu ne voit pas le SSD.
@geole, oui c'est un NVMe et effectivement la procédure semble risqué pour Windows.
Mais si je peux changer la séquence du boot manuellement pour démarrer Windows ou Ubuntu, n'y a-t-il pas un moyen que cela soit proposé au démarrage du pc?
Hors ligne
#8 Le 13/09/2019, à 06:56
- ikewdu
Re : problème installation Ubuntu sur DELL precision 5520
Re,
Comme il a été dit plus haut, c'est peut-être avec le BIOS que tu peux rendre ton NVMe visible par Ubunru.
Sinon, après réflexion, il existe peut-être une autre solution, sans garantie qu'elle puisse fonctionner. Elle consisterait à copier depuis Windows ses fichiers de démarrage vers la partition efi du HD. Ainsi, GRUB pourrait ajouter l'entrée Windows dans sa liste.
Mais, pas sûr que ça fonctionne, et c'est un bidouillage assez peu élégant. Je pense, comme Geôle, que le passage par le BIOS (ou la touche qui affiche un menu de démarrage) est un moindre mal dans ton cas.
Dernière modification par ikewdu (Le 13/09/2019, à 06:57)
Hors ligne
#9 Le 13/09/2019, à 13:36
- stef_god
Re : problème installation Ubuntu sur DELL precision 5520
Je suis allé dans le BIOS pour voir la modification du HD de RAID vers AHCI.
Un avertissement que l’installation de l'OS peut être perdu me refroidi.
Sinon l'approche de copier depuis Windows ses fichiers de démarrage, je ne sais pas comment la mettre en place.
Hors ligne
#10 Le 13/09/2019, à 13:40
- xubu1957
Re : problème installation Ubuntu sur DELL precision 5520
Bonjour,
Collage du Boot-Info :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: /mnt/BootInfo/sda1: unknown filesystem type ''.
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 19.04
Boot files: /boot/grub/grub.cfg /etc/fstab
sda5: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/BOOT/mmx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: WDC WD10SPCX-75K
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 264,191 262,144 Microsoft Reserved Partition (Windows)
/dev/sda2 264,192 929,523,711 929,259,520 Data partition (Windows/Linux)
/dev/sda3 1,871,603,712 1,953,523,711 81,920,000 Swap partition (Linux)
/dev/sda4 1,810,163,712 1,871,603,711 61,440,000 Data partition (Linux)
/dev/sda5 929,523,712 1,810,163,711 880,640,000 EFI System partition
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop10 squashfs
/dev/loop11 squashfs
/dev/loop12 squashfs
/dev/loop13 squashfs
/dev/loop14 squashfs
/dev/loop15 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/loop9 squashfs
/dev/sda1
/dev/sda2 74F8886AF8882C84 ntfs DATA
/dev/sda3 5d6c53ea-3e71-4514-a370-435d7613e124 swap
/dev/sda4 9042e72a-04fe-4a4b-a6a8-89a291e9ca63 ext4
/dev/sda5 8193-D4F6 vfat
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Sep 12 22:47 ata-WDC_WD10SPCX-75KHST0_WX81AB6JHT2D -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 12 22:47 ata-WDC_WD10SPCX-75KHST0_WX81AB6JHT2D-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 12 22:48 ata-WDC_WD10SPCX-75KHST0_WX81AB6JHT2D-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 12 22:47 ata-WDC_WD10SPCX-75KHST0_WX81AB6JHT2D-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 12 22:47 ata-WDC_WD10SPCX-75KHST0_WX81AB6JHT2D-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Sep 12 22:47 ata-WDC_WD10SPCX-75KHST0_WX81AB6JHT2D-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Sep 12 22:47 wwn-0x50014ee60737545f -> ../../sda
lrwxrwxrwx 1 root root 10 Sep 12 22:47 wwn-0x50014ee60737545f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep 12 22:48 wwn-0x50014ee60737545f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep 12 22:47 wwn-0x50014ee60737545f-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 12 22:47 wwn-0x50014ee60737545f-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Sep 12 22:47 wwn-0x50014ee60737545f-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda4 / ext4 (rw,relatime,errors=remount-ro)
/dev/sda5 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda4/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${initrdfail}" = 2 ]; then
set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
set next_entry="${prev_entry}"
set prev_entry=
save_env prev_entry
if [ "${next_entry}" ]; then
set initrdfail=2
fi
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function initrdfail {
if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
if [ -z "${initrdfail}" ]; then
set initrdfail=1
if [ -n "${boot_once}" ]; then
set prev_entry="${default}"
save_env prev_entry
fi
fi
save_env initrdfail
fi; fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
else
search --no-floppy --fs-uuid --set=root 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=0
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-9042e72a-04fe-4a4b-a6a8-89a291e9ca63' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
else
search --no-floppy --fs-uuid --set=root 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
fi
linux /boot/vmlinuz-5.0.0-27-generic root=UUID=9042e72a-04fe-4a4b-a6a8-89a291e9ca63 ro quiet splash $vt_handoff
initrd /boot/initrd.img-5.0.0-27-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-9042e72a-04fe-4a4b-a6a8-89a291e9ca63' {
menuentry 'Ubuntu, avec Linux 5.0.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-27-generic-advanced-9042e72a-04fe-4a4b-a6a8-89a291e9ca63' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
else
search --no-floppy --fs-uuid --set=root 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
fi
echo 'Chargement de Linux 5.0.0-27-generic…'
linux /boot/vmlinuz-5.0.0-27-generic root=UUID=9042e72a-04fe-4a4b-a6a8-89a291e9ca63 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-27-generic
}
menuentry 'Ubuntu, with Linux 5.0.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-27-generic-recovery-9042e72a-04fe-4a4b-a6a8-89a291e9ca63' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
else
search --no-floppy --fs-uuid --set=root 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
fi
echo 'Chargement de Linux 5.0.0-27-generic…'
linux /boot/vmlinuz-5.0.0-27-generic root=UUID=9042e72a-04fe-4a4b-a6a8-89a291e9ca63 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-27-generic
}
menuentry 'Ubuntu, avec Linux 5.0.0-13-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-13-generic-advanced-9042e72a-04fe-4a4b-a6a8-89a291e9ca63' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
else
search --no-floppy --fs-uuid --set=root 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
fi
echo 'Chargement de Linux 5.0.0-13-generic…'
linux /boot/vmlinuz-5.0.0-13-generic root=UUID=9042e72a-04fe-4a4b-a6a8-89a291e9ca63 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-13-generic
}
menuentry 'Ubuntu, with Linux 5.0.0-13-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-13-generic-recovery-9042e72a-04fe-4a4b-a6a8-89a291e9ca63' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
else
search --no-floppy --fs-uuid --set=root 9042e72a-04fe-4a4b-a6a8-89a291e9ca63
fi
echo 'Chargement de Linux 5.0.0-13-generic…'
linux /boot/vmlinuz-5.0.0-13-generic root=UUID=9042e72a-04fe-4a4b-a6a8-89a291e9ca63 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.0.0-13-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda4/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda4 during installation
UUID=9042e72a-04fe-4a4b-a6a8-89a291e9ca63 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda5 during installation
UUID=8193-D4F6 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda3 during installation
UUID=5d6c53ea-3e71-4514-a370-435d7613e124 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda4: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
889.376754761 = 954.961018880 boot/grub/grub.cfg 3
864.661422729 = 928.423133184 boot/vmlinuz-5.0.0-13-generic 1
866.427055359 = 930.318966784 boot/vmlinuz-5.0.0-27-generic 1
864.661422729 = 928.423133184 vmlinuz 1
866.800144196 = 930.719567872 boot/initrd.img-5.0.0-13-generic 3
867.035156250 = 930.971910144 boot/initrd.img-5.0.0-27-generic 3
866.800144196 = 930.719567872 initrd.img 3
866.800144196 = 930.719567872 initrd.img.old 3
========================== sda5/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 9042e72a-04fe-4a4b-a6a8-89a291e9ca63 root hd0,gpt4
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
ADDITIONAL INFORMATION :
=================== log of boot-info 20190912_2247 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 19.04, disco, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 39 bits physical, 48 bits virtual
BOOT_IMAGE=/boot/vmlinuz-5.0.0-27-generic root=UUID=9042e72a-04fe-4a4b-a6a8-89a291e9ca63 ro quiet splash vt.handoff=1
=================== os-prober:
/dev/sda4:L'OS actuellement utilisé - Ubuntu 19.04 CurrentSession:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda2: LABEL="DATA" UUID="74F8886AF8882C84" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="57935232-2df6-46eb-ab71-6bb067b273fd"
/dev/sda3: UUID="5d6c53ea-3e71-4514-a370-435d7613e124" TYPE="swap" PARTLABEL="swap" PARTUUID="15097b27-8829-4680-a11e-b81f0ac83c88"
/dev/sda4: UUID="9042e72a-04fe-4a4b-a6a8-89a291e9ca63" TYPE="ext4" PARTLABEL="racine" PARTUUID="dfaf5530-58cd-43d6-9ecd-2c38dd8e6e3b"
/dev/sda5: UUID="8193-D4F6" TYPE="vfat" PARTUUID="001c137a-7eba-40c0-a7c7-957289b72d6f"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
/dev/loop13: TYPE="squashfs"
/dev/loop14: TYPE="squashfs"
/dev/loop15: TYPE="squashfs"
/dev/sda1: PARTLABEL="Microsoft reserved partition" PARTUUID="65db82d7-a49b-4a25-8ffd-5fbbb7dab51a"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 avril 16 21:10 grub.d
total 80
-rwxr-xr-x 1 root root 10627 mars 11 2019 00_header
-rwxr-xr-x 1 root root 6258 mars 11 2019 05_debian_theme
-rwxr-xr-x 1 root root 13718 mars 11 2019 10_linux
-rwxr-xr-x 1 root root 11497 mars 11 2019 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars 11 2019 30_os-prober
-rwxr-xr-x 1 root root 1418 mars 11 2019 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 11 2019 40_custom
-rwxr-xr-x 1 root root 216 mars 11 2019 41_custom
-rw-r--r-- 1 root root 483 mars 11 2019 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda4: UUID=8193-D4F6 (sda5)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/mmx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : substitution de commande: octet nul ignoré en entrée
=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,0000,0002
Boot0000* Windows Boot Manager HD(1,GPT,e1772ab3-999f-4c48-95de-58b722d12feb,0x800,0xfa000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* ubuntu HD(5,GPT,001c137a-7eba-40c0-a7c7-957289b72d6f,0x37676800,0x347d8000)/File(EFIubuntushimx64.efi)
Boot0002* usb PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)/HD(1,MBR,0x5447fd6e,0x800,0x777800)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda4 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda2.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10SPCX-75K:;
1:1049kB:135MB:134MB::Microsoft reserved partition:msftres;
2:135MB:476GB:476GB:ntfs:Basic data partition:msftdata;
5:476GB:927GB:451GB:fat32::boot, esp;
4:927GB:958GB:31.5GB:ext4:racine:;
3:958GB:1000GB:41.9GB:linux-swap(v1):swap:;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 89,3M
loop1 loop squashfs 3,7M
loop2 loop squashfs 1008K
loop3 loop squashfs 35,3M
loop4 loop squashfs 53,7M
loop5 loop squashfs 151M
loop6 loop squashfs 4M
loop7 loop squashfs 14,8M
loop8 loop squashfs 54,4M
loop9 loop squashfs 89M
loop10 loop squashfs 956K
loop11 loop squashfs 14,8M
loop12 loop squashfs 3,7M
loop13 loop squashfs 4,2M
loop14 loop squashfs 42,8M
loop15 loop squashfs 149,9M
sda disk 931,5G
sda1 part 128M
sda2 part ntfs 443,1G DATA
sda3 part swap 39,1G
sda4 part ext4 29,3G
sda5 part vfat 419,9G
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /snap/core/6673
loop1 1 1 0 /snap/gnome-system-monitor/77
loop2 1 1 0 /snap/gnome-logs/61
loop3 1 1 0 /snap/gtk-common-themes/1198
loop4 1 1 0 /snap/core18/941
loop5 1 1 0 /snap/gnome-3-28-1804/31
loop6 1 1 0 /snap/gnome-calculator/406
loop7 1 1 0 /snap/gnome-characters/254
loop8 1 1 0 /snap/core18/1144
loop9 1 1 0 /snap/core/7713
loop10 1 1 0 /snap/gnome-logs/73
loop11 1 1 0 /snap/gnome-characters/317
loop12 1 1 0 /snap/gnome-system-monitor/100
loop13 1 1 0 /snap/gnome-calculator/501
loop14 1 1 0 /snap/gtk-common-themes/1313
loop15 1 1 0 /snap/gnome-3-28-1804/71
sda 1 0 0 running
sda1 1 0 0
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0 [SWAP]
sda4 1 0 0 /
sda5 1 0 0 /boot/efi
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=16368680k,nr_inodes=4092170,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=3278580k,mode=755)
/dev/sda4 on / type ext4 (rw,relatime,errors=remount-ro)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=27,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=17453)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/gnome-logs_61.snap on /snap/gnome-logs/61 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_77.snap on /snap/gnome-system-monitor/77 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_6673.snap on /snap/core/6673 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_941.snap on /snap/core18/941 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1198.snap on /snap/gtk-common-themes/1198 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_31.snap on /snap/gnome-3-28-1804/31 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_254.snap on /snap/gnome-characters/254 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_406.snap on /snap/gnome-calculator/406 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda5 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=3278576k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/var/lib/snapd/snaps/core18_1144.snap on /snap/core18/1144 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_7713.snap on /snap/core/7713 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_73.snap on /snap/gnome-logs/73 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_317.snap on /snap/gnome-characters/317 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_100.snap on /snap/gnome-system-monitor/100 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_501.snap on /snap/gnome-calculator/501 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1313.snap on /snap/gtk-common-themes/1313 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_71.snap on /snap/gnome-3-28-1804/71 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 sda3 sda4 sda5 size slaves stat subsystem trace uevent
/dev (filtered): acpi_thermal_rel autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 drm_dp_aux2 ecryptfs fb0 fd freefall full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-15 i2c-16 i2c-17 i2c-18 i2c-19 i2c-2 i2c-20 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sg0 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 udmabuf uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 wmi zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 04 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 5f 63 37 00 00 00 00 |........._c7....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 84 2c 88 f8 6a 88 f8 74 |.........,..j..t|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 40 40 00 |.X.mkfs.fat..@@.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 68 67 37 |........?....hg7|
00000020 00 80 7d 34 00 a4 01 00 00 00 00 00 02 00 00 00 |..}4............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 f6 d4 93 81 4e 4f 20 4e 41 4d 45 20 20 |..)....NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 16G 0 16G 0% /dev
tmpfs tmpfs 3.2G 1.9M 3.2G 1% /run
/dev/sda4 ext4 29G 5.8G 22G 21% /
tmpfs tmpfs 16G 51M 16G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 16G 0 16G 0% /sys/fs/cgroup
/dev/loop2 squashfs 1.0M 1.0M 0 100% /snap/gnome-logs/61
/dev/loop1 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/77
/dev/loop0 squashfs 90M 90M 0 100% /snap/core/6673
/dev/loop4 squashfs 54M 54M 0 100% /snap/core18/941
/dev/loop3 squashfs 36M 36M 0 100% /snap/gtk-common-themes/1198
/dev/loop5 squashfs 152M 152M 0 100% /snap/gnome-3-28-1804/31
/dev/loop7 squashfs 15M 15M 0 100% /snap/gnome-characters/254
/dev/loop6 squashfs 4.2M 4.2M 0 100% /snap/gnome-calculator/406
/dev/sda5 vfat 420G 7.8M 420G 1% /boot/efi
tmpfs tmpfs 3.2G 24K 3.2G 1% /run/user/1000
/dev/loop8 squashfs 55M 55M 0 100% /snap/core18/1144
/dev/loop9 squashfs 90M 90M 0 100% /snap/core/7713
/dev/loop10 squashfs 1.0M 1.0M 0 100% /snap/gnome-logs/73
/dev/loop11 squashfs 15M 15M 0 100% /snap/gnome-characters/317
/dev/loop12 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/100
/dev/loop13 squashfs 4.3M 4.3M 0 100% /snap/gnome-calculator/501
/dev/loop14 squashfs 43M 43M 0 100% /snap/gtk-common-themes/1313
/dev/loop15 squashfs 150M 150M 0 100% /snap/gnome-3-28-1804/71
/dev/sda2 fuseblk 444G 14G 430G 4% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/loop0: 89.3 MiB, 93581312 bytes, 182776 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 3.7 MiB, 3821568 bytes, 7464 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 1008 KiB, 1032192 bytes, 2016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 35.3 MiB, 37027840 bytes, 72320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 53.7 MiB, 56315904 bytes, 109992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 151 MiB, 158343168 bytes, 309264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 4 MiB, 4218880 bytes, 8240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 14.8 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: WDC WD10SPCX-75K
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: C0A35349-0408-42D9-A3F2-81A702CCD68D
Device Start End Sectors Size Type
/dev/sda1 2048 264191 262144 128M Microsoft reserved
/dev/sda2 264192 929523711 929259520 443.1G Microsoft basic data
/dev/sda3 1871603712 1953523711 81920000 39.1G Linux swap
/dev/sda4 1810163712 1871603711 61440000 29.3G Linux filesystem
/dev/sda5 929523712 1810163711 880640000 419.9G EFI System
Partition table entries are not in disk order.
Disk /dev/loop8: 54.4 MiB, 57065472 bytes, 111456 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop9: 89 MiB, 93327360 bytes, 182280 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop10: 956 KiB, 978944 bytes, 1912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop11: 14.8 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop12: 3.7 MiB, 3825664 bytes, 7472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop13: 4.2 MiB, 4403200 bytes, 8600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop14: 42.8 MiB, 44879872 bytes, 87656 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop15: 149.9 MiB, 157192192 bytes, 307016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda4, using the following options: sda5/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda5/efi/.../grub*.efi !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 19.04] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot/efi (FAT32, 100MB~250MB, en début de disque, drapeau boot). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot/efi séparée :] de [Boot-Repair].
=================== User settings
The settings chosen by the user will not act on the boot.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#11 Le 13/09/2019, à 13:52
- geole
Re : problème installation Ubuntu sur DELL precision 5520
Sinon, après réflexion, il existe peut-être une autre solution, sans garantie qu'elle puisse fonctionner. Elle consisterait à copier depuis Windows ses fichiers de démarrage vers la partition efi du HD. Ainsi, GRUB pourrait ajouter l'entrée Windows dans sa liste.
.
Bonjour
Effectivement. J'ai déjà vu des windows10 installés sur un autre disque que la structure de boot EFI de windows.
Mais n'est pas simple de "démasquer" la structure de boot EFI . La copie devra se faire en ligne de commandes. mais je ne maitrise pas..
Nota: J'ai aussi pensé à un 'refind" installé par windows..... Il faudrait demander au concepteur... Cela va prendre du temps. Sauf à essayer Cela me semble sans risque.
J'ai vu cette discussion datant d'il y a 3 ans https://sourceforge.net/p/refind/discus … /03c98f43/
f you can find an EFI driver for your board, rEFInd might be able to load and use it. (rEFInd can load and use filesystem drivers, but this feature is untested with other driver types -- at least, AFAIK.) EFI hardware drivers are pretty rare, though; they're either built into boards as firmware or are unavailable to the general public, in my experience. Still, you could check with the board's manufacturer. Also check with the manufacturer of the chipset used by the board.
If you find a driver file but can't get it to work, please contact me; I'd be interested in improving rEFInd to get this working if it doesn't already work.
.
Dernière modification par geole (Le 13/09/2019, à 14:18)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#12 Le 13/09/2019, à 14:05
- GammaDraconis
Re : problème installation Ubuntu sur DELL precision 5520
Ah oui évidemment il faut pas être en RAID !
Et si ça flingue WIndows ? tanpis tu réinstellera WIndows.
En faites le mieux est de tout recommencer de 0 cad tu supprimes tout ce qui a sur ton disque dur (si tu as des documents importants tu les sauvegardes biensûr sur un disque externe avant)
Ensuite tu désactive le RAID puis tu installes Windows en 1er puis ton Linux en 2e.
(vérifie avant en session live depuis la clé que le ssd nvme est bien détecté).
Discussion sur mon script de post-install pour Ubuntu 20.04LTS : https://forum.ubuntu-fr.org/viewtopic.php?id=2026344
Lien direct script : https://github.com/simbd/Ubuntu_20.04LTS_PostInstall
Démo vidéo (peertube) : https://video.ploud.fr/videos/watch/fb7 … 0d252ed2db
Hors ligne
#13 Le 13/09/2019, à 14:23
- geole
Re : problème installation Ubuntu sur DELL precision 5520
C'est effectivement une solution pour diviser par 10 la performance de windows afin que ubuntu ne paraisse par ringard...
Lorsqu'il n'y a qu'un seul disque, le choix est vite fait: Il faut demander à windows de cesser d'utiiser le RAIDS avant de modifier le bios.
ICI il y a un SSD contenant windows et un disque dur contenant ubuntu
La solution du choix de boot par le bios n'est pas si pénible que cela. La duplication de la structure de boot va certainement être efficace...
Dernière modification par geole (Le 13/09/2019, à 14:26)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#14 Le 13/09/2019, à 15:07
- stef_god
Re : problème installation Ubuntu sur DELL precision 5520
Merci à tous pour vos propositions mais je pense comme Geole que le boot par le Bios est le plus simple surtout que je n'ai pas l'installation de Windows.
Hors ligne
#15 Le 14/09/2019, à 10:39
- geole
Re : problème installation Ubuntu sur DELL precision 5520
Bonjour.
Tu pourrais tenter d'installer EASYEFI dans windows. https://www.easyuefi.com/index-us.html
Il devrait proposer un dual boot
Dernière modification par geole (Le 14/09/2019, à 10:40)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#16 Le 14/09/2019, à 15:08
- ikewdu
Re : problème installation Ubuntu sur DELL precision 5520
Bonjour.
Tu pourrais tenter d'installer EASYEFI dans windows. https://www.easyuefi.com/index-us.html
Il devrait proposer un dual boot
Salut,
La version gratuite ne permet plus de faire grand chose, il me semble. Il faut passer par bcdedit.
Hors ligne