#76 Le 16/11/2019, à 20:06
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
avais-tu fait des essais en bootant avec une clé USB?
Oui j'avais essayé avec une clé USB contenant Boot Repair dans l'espoir d'obtenir un Boot-info que tous les intervenants dans ce fil m'ont réclamé en vain. Je n'avais pas réussi. Suite à ton dernier message, j'ai refait toute la procédure de création d'une clé USB avec l'iso d'Ubuntu 19.10. J'ai enlevé le disque NVMe contenant Windows, et la tentative de boot sur la clé a échoué avec toujours les memes messages d'erreur. J'ai répété plusieurs fois l'essai en modifiant le setparams (en ajoutant iommu=off, ou loglevel=7, etc...). J'ai débranché le lecteur de disques, et malgré l'affichage rapide de deux lignes de messages "error" j'ai vu apparaitre un menu Ubuntu qui a vite disparu. J'ai recommencé plusieurs fois et c'est avec la combinaison d'un setparams d'origine (sans additions) et d'un lecteur de disques débranché que j'ai finalement obtenu l'installation d'Ubuntu 19.10 !
J'ai réenfiché le disque NVMe contenant windows et j'ai constaté avec soulagement qu'il fonctionnait toujours, et qu'avec la touche F11 j'obtenais un "boot override" qui me permet le dual-boot dont j'avais besoin.
J'ai essayé de reconnecter le lecteur de disques et Ubuntu ne démarrait plus !
Je crois donc avoir la preuve que c'est ce branchement SATA qui empechait l'accès au controleur AHCI. L'une ou l'autre ligne de messages d'erreur apparaissent encore furtivement mais ne bloquent pas le démarrage d'Ubuntu.
Un GRAND MERCI à geole !
Dernière modification par lysbleu (Le 18/11/2019, à 14:59)
Hors ligne
#77 Le 16/11/2019, à 20:45
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Donc la persévérence a payé!
Puis-je résumer ainsi, en disant,
Si on débranche le controleur des disques durs, on réussi à faire une installation standard
Pour la suite, je te propose une série d'actions
A) Produire un boot-info à partir du UBUNTU installé afin de pouvoir mettre à jour la documentation
B) Mettre le logiciel à jour avec ces commandes à ne lancer qu'une demie heure après mise en route afin qu'il ait le temps de télécharger en tache de fond les mises à jour en attente
sudo apt update
sudo apt upgrade
C) On va s'attaquer au problème de fond: Essayer d'utiliser le controleur en question.
1) D'abord, on va regarder si, avec le ubuntu installé et à jour , le controleur fonctionne.
- a) Arrêter l'ordinateur
- b) Rebrancher le matériel
- c) Rebooter
- Vérifier que l'accès aux disque durs est possible. Si oui, on a la preuve que le problème est lié à l'installateur..
- C'"est toi qui décidera s'il faut poursuivre en informant https://launchpad.net/
2) Si c'est toujours un boot impossible
a) Arrêter l'ordinateur
b) Débrancher de nouveau le controleur
c) Rebooter
d) Modifier le fichier de configuration du grub, ( /etc/default/grub pour mettre les grosses traces
La ligne à modifier commence par un mot clé. A titre d'example, chez moi, elle est
GRUB_CMDLINE_LINUX="debug ignore_loglevel quiet splash fsck.mode=force fsck.repair=yes vt.handoff=7"
Je te propose de mettre
GRUB_CMDLINE_LINUX=" loglevel=7 systemd.log_level=debug "
e) Faire prendre en charge la modification avec cette commande
sudo update-grub
f) Arrêter l'ordinateur et Rebrancher
g) Rebooter et constater que cela ne fonctionne toujours pas
h) Arrêter l'ordinateur et Débrancher
g) Rebooter et constater que cela fonctionne.
i) Aller récupérer les traces qui sont dans le fichier /var/log/syslog ou dans le fichier /var/log/syslog.1
j) Les transmettre dans cette discussion afin de voir si quelque chose d'évident est visible!
k) Ouvrir un incident auprès de https://launchpad.net/ si rien n'a été visible
Bonne soirée
Dernière modification par geole (Le 16/11/2019, à 20:56)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#78 Le 17/11/2019, à 13:21
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Bonjour
En parcourant la documentation d'installation https://download.msi.com/archive/mnu_ex … 37v3.1.pdf Pafe 31, j'ai lu cela
Important: Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission overwise.
Si les câbles ont été trop pliés à un moment, Les remettre droit ne permet pas de réparer ce qui a été cassé, il faut les remplacer.
Il y a aussi en page 32
Important: Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.
ET SURTOUT en page 48.
PCH Gen Switch [Auto]Sets PCI Express protocol of PCIe x16 slots for matching different installed devices
.[Auto] This item will be configured automatically by BIOS
.[Gen1] Enables PCIe Gen1 support only.
[Gen2] Enables PCIe Gen2 support only.
[Gen3] Enables PCIe Gen3 support only.
[Gen4] Enables PCIe Gen4 support only
S'il en automatique, il peut être modifié sur gen4, les disques SATA seront éliminés
Je pense que c'est une piste à creuser
Dernière modification par geole (Le 17/11/2019, à 13:52)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#79 Le 17/11/2019, à 15:06
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Donc la persévérence a payé!
Puis-je résumer ainsi, en disant,
Si on débranche le controleur des disques durs, on réussi à faire une installation standard
Pour la suite, je te propose une série d'actions
A) Produire un boot-info à partir du UBUNTU installé afin de pouvoir mettre à jour la documentation
Merci geole pour ton enthousiasme !
Je commence (une manip à la fois) par le boot-info :
boot-info
Et déjà je suis noyé par ce boot-info !
Hors ligne
#80 Le 17/11/2019, à 15:41
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Bonjour
Merci de la production du boot-info.
Exceptionnellement, je colle la totalité de ce boot-info dans la discussion. Cela pourra peut-être servir par la suite
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/BOOT/mmx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 19.10
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 232.91 GiB, 250059350016 bytes, 488397168 sectors
Disk model: CT250MX500SSD4
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 488,397,167 488,397,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 488,396,799 487,346,176 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop10 squashfs
/dev/loop11 squashfs
/dev/loop12 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/loop9 squashfs
/dev/nvme0n1p1 8C169DE3169DCF18 ntfs Récupération
/dev/nvme0n1p2 9E9E-2CF6 vfat
/dev/nvme0n1p3
/dev/nvme0n1p4 08469ED2469EC03C ntfs WINDOWS
/dev/sda1 3989-B3DF vfat
/dev/sda2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Nov 17 13:48 ata-CT250MX500SSD4_1830E14B7B4F -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 17 13:48 ata-CT250MX500SSD4_1830E14B7B4F-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 17 13:48 ata-CT250MX500SSD4_1830E14B7B4F-part2 -> ../../sda2
lrwxrwxrwx 1 root root 13 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part4 -> ../../nvme0n1p4
lrwxrwxrwx 1 root root 13 Nov 17 13:48 nvme-eui.0025385691b602a4 -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-eui.0025385691b602a4-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-eui.0025385691b602a4-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-eui.0025385691b602a4-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-eui.0025385691b602a4-part4 -> ../../nvme0n1p4
lrwxrwxrwx 1 root root 9 Nov 17 13:48 wwn-0x500a0751e14b7b4f -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 17 13:48 wwn-0x500a0751e14b7b4f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 17 13:48 wwn-0x500a0751e14b7b4f-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/fuse /root/.cache/doc fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/fuse /run/user/1000/doc fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${initrdfail}" = 2 ]; then
set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
set next_entry="${prev_entry}"
set prev_entry=
save_env prev_entry
if [ "${next_entry}" ]; then
set initrdfail=2
fi
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function initrdfail {
if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
if [ -z "${initrdfail}" ]; then
set initrdfail=1
if [ -n "${boot_once}" ]; then
set prev_entry="${default}"
save_env prev_entry
fi
fi
save_env initrdfail
fi; fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
# previously #2c001e 44,0,30,0
# now yaru #4f194c 79,25,76
if background_color 79,25,76,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
linux /boot/vmlinuz-5.3.0-23-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro quiet splash $vt_handoff
initrd /boot/initrd.img-5.3.0-23-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
menuentry 'Ubuntu, with Linux 5.3.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-23-generic-advanced-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
echo 'Loading Linux 5.3.0-23-generic ...'
linux /boot/vmlinuz-5.3.0-23-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.3.0-23-generic
}
menuentry 'Ubuntu, with Linux 5.3.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-23-generic-recovery-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
echo 'Loading Linux 5.3.0-23-generic ...'
linux /boot/vmlinuz-5.3.0-23-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.3.0-23-generic
}
menuentry 'Ubuntu, with Linux 5.3.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-18-generic-advanced-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
echo 'Loading Linux 5.3.0-18-generic ...'
linux /boot/vmlinuz-5.3.0-18-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.3.0-18-generic
}
menuentry 'Ubuntu, with Linux 5.3.0-18-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-18-generic-recovery-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
echo 'Loading Linux 5.3.0-18-generic ...'
linux /boot/vmlinuz-5.3.0-18-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.3.0-18-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_linux_zfs ###
### END /etc/grub.d/10_linux_zfs ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=3989-B3DF /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
118.631969452 = 127.380107264 boot/grub/grub.cfg 2
4.860347748 = 5.218758656 boot/vmlinuz 2
4.860347748 = 5.218758656 boot/vmlinuz-5.3.0-18-generic 2
5.683467865 = 6.102577152 boot/vmlinuz-5.3.0-23-generic 1
6.537849426 = 7.019962368 boot/initrd.img 2
6.537849426 = 7.019962368 boot/initrd.img-5.3.0-18-generic 2
6.100196838 = 6.550036480 boot/initrd.img-5.3.0-23-generic 4
6.537849426 = 7.019962368 boot/initrd.img.old 2
ADDITIONAL INFORMATION :
=================== log of boot-info 20191117_1348 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 19.10, eoan, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 43 bits physical, 48 bits virtual
BOOT_IMAGE=/boot/vmlinuz-5.3.0-23-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro quiet splash vt.handoff=7
The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Falling back to read-only mount because the NTFS partition is in an
unsafe state. Please resume and shutdown Windows fully (no hibernation
or fast restarting.)
Could not mount read-write, trying read-only
Windows is hibernated, refused to mount.
The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Falling back to read-only mount because the NTFS partition is in an
unsafe state. Please resume and shutdown Windows fully (no hibernation
or fast restarting.)
Could not mount read-write, trying read-only
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 19.10 CurrentSession:linux
/dev/nvme0n1p2@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
=================== blkid:
/dev/sda2: UUID="b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b" TYPE="ext4" PARTUUID="c3e74f6f-b366-45f6-9478-04659445f17f"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/nvme0n1p1: LABEL="RM-CM-)cupM-CM-)ration" UUID="8C169DE3169DCF18" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="d6ce8e4d-518c-4d30-be3c-986a425c8c10"
/dev/nvme0n1p2: UUID="9E9E-2CF6" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="3ca5748f-3e4f-4b6f-9a14-d653e21e2091"
/dev/nvme0n1p4: LABEL="WINDOWS" UUID="08469ED2469EC03C" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="78fb7f68-9793-4d2a-b4f8-b13247248bd8"
/dev/sda1: UUID="3989-B3DF" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="575119b3-cd00-422e-b874-d2f74e644861"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
/dev/nvme0n1p3: PARTLABEL="Microsoft reserved partition" PARTUUID="07e7f3fb-d92e-45bc-82e4-240499d2004b"
2 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on nvme0n1p4.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 oct. 17 14:34 grub.d
total 128
-rwxr-xr-x 1 root root 10627 oct. 11 15:57 00_header
-rwxr-xr-x 1 root root 6258 oct. 11 15:57 05_debian_theme
-rwxr-xr-x 1 root root 17123 oct. 11 15:57 10_linux
-rwxr-xr-x 1 root root 37613 oct. 11 15:57 10_linux_zfs
-rwxr-xr-x 1 root root 12894 oct. 11 15:57 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 oct. 11 15:57 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 11 15:57 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 11 15:57 40_custom
-rwxr-xr-x 1 root root 216 oct. 11 15:57 41_custom
-rw-r--r-- 1 root root 483 oct. 11 15:57 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=3989-B3DF (sda1)
Presence of EFI/Microsoft file detected: /mnt/boot-sav/nvme0n1p2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/nvme0n1p2/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/mmx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : substitution de commande: octet nul ignoré en entrée
=================== efibootmgr -v
BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 0002,0003
Boot0002* Windows Boot Manager HD(2,GPT,3ca5748f-3e4f-4b6f-9a14-d653e21e2091,0xfa000,0x31800)/File(EFIMICROSOFTBOOTBOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...3................
Boot0003* ubuntu HD(1,GPT,575119b3-cd00-422e-b874-d2f74e644861,0x800,0x100000)/File(EFIUBUNTUSHIMX64.EFI)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
nvme0n1p1 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/nvme0n1p1.
nvme0n1p2 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/nvme0n1p2.
nvme0n1p4 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/nvme0n1p4.
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
nvme0n1 : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:gpt:ATA CT250MX500SSD4:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:250GB:250GB:ext4::;
BYT;
/dev/nvme0n1:250GB:nvme:512:512:gpt:Samsung SSD 970 EVO Plus 250GB:;
1:1049kB:524MB:523MB:ntfs:Basic data partition:hidden, diag;
2:524MB:628MB:104MB:fat32:EFI system partition:boot, esp;
3:628MB:645MB:16.8MB::Microsoft reserved partition:msftres;
4:645MB:250GB:249GB:ntfs:Basic data partition:msftdata;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 4,2M
loop1 loop squashfs 418,7M
loop2 loop squashfs 54,5M
loop3 loop squashfs 956K
loop4 loop squashfs 156,7M
loop5 loop squashfs 149,9M
loop6 loop squashfs 54,5M
loop7 loop squashfs 4,2M
loop8 loop squashfs 14,8M
loop9 loop squashfs 14,8M
loop10 loop squashfs 89,1M
loop11 loop squashfs 44,2M
loop12 loop squashfs 89,1M
sda disk 232,9G
sda1 part vfat 512M
sda2 part ext4 232,4G
nvme0n1 disk 232,9G
nvme0n1p1 part ntfs 499M Récupération
nvme0n1p2 part vfat 99M
nvme0n1p3 part 16M
nvme0n1p4 part ntfs 232,3G WINDOWS
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 0 1 0 /snap/gnome-calculator/501
loop1 0 1 0 /snap/libreoffice/157
loop2 0 1 0 /snap/core18/1223
loop3 0 1 0 /snap/gnome-logs/81
loop4 0 1 0 /snap/gnome-3-28-1804/110
loop5 0 1 0 /snap/gnome-3-28-1804/71
loop6 0 1 0 /snap/core18/1265
loop7 0 1 0 /snap/gnome-calculator/544
loop8 0 1 0 /snap/gnome-characters/317
loop9 0 1 0 /snap/gnome-characters/367
loop10 0 1 0 /snap/core/8039
loop11 0 1 0 /snap/gtk-common-themes/1353
loop12 0 1 0 /snap/core/7917
sda 0 0 0 running
sda1 0 0 0 /boot/efi
sda2 0 0 0 /
nvme0n1 0 0 0 live
nvme0n1p1 0 0 0 /mnt/boot-sav/nvme0n1p1
nvme0n1p2 0 0 0 /mnt/boot-sav/nvme0n1p2
nvme0n1p3 0 0 0
nvme0n1p4 0 0 0 /mnt/boot-sav/nvme0n1p4
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=7109732k,nr_inodes=1777433,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1434024k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=22182)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
/var/lib/snapd/snaps/libreoffice_157.snap on /snap/libreoffice/157 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1223.snap on /snap/core18/1223 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_81.snap on /snap/gnome-logs/81 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_110.snap on /snap/gnome-3-28-1804/110 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_501.snap on /snap/gnome-calculator/501 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_71.snap on /snap/gnome-3-28-1804/71 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1265.snap on /snap/core18/1265 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_367.snap on /snap/gnome-characters/367 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_544.snap on /snap/gnome-calculator/544 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_317.snap on /snap/gnome-characters/317 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_8039.snap on /snap/core/8039 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1353.snap on /snap/gtk-common-themes/1353 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_7917.snap on /snap/core/7917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=1434020k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/fuse on /run/user/1000/doc type fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
gvfsd-fuse on /root/.cache/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/fuse on /root/.cache/doc type fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/nvme0n1p1 on /mnt/boot-sav/nvme0n1p1 type fuseblk (ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/nvme0n1p2 on /mnt/boot-sav/nvme0n1p2 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/nvme0n1p4 on /mnt/boot-sav/nvme0n1p4 type fuseblk (ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
=================== ls:
/sys/block/nvme0n1 (filtered): alignment_offset bdi capability dev device discard_alignment eui events events_async events_poll_msecs ext_range hidden holders inflight integrity lightnvm mq nsid nvme0n1p1 nvme0n1p2 nvme0n1p3 nvme0n1p4 power queue range removable ro size slaves stat subsystem trace uevent wwid
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hidraw1 hidraw2 hidraw3 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kfd kmsg lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null nvme0 nvme0n1 nvme0n1p1 nvme0n1p2 nvme0n1p3 nvme0n1p4 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout udmabuf uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero zfs
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/nvme0n1p1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 97 0f 00 00 00 00 00 |................|
00000030 55 a6 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U...............|
00000040 f6 00 00 00 01 00 00 00 18 cf 9d 16 e3 9d 16 8c |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/nvme0n1p2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 02 0e 1a |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 a0 0f 00 |........?.......|
00000020 00 18 03 00 f9 02 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 f6 2c 9e 9e 4e 4f 20 4e 41 4d 45 20 20 |..).,..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 45 72 |..............Er|
000001b0 72 2e 20 64 69 73 71 75 65 ff 0d 0a 50 72 65 73 |r. disque...Pres|
000001c0 73 65 7a 20 75 6e 65 20 74 6f 75 63 68 65 20 70 |sez une touche p|
000001d0 6f 75 72 20 72 65 64 82 6d 61 72 72 65 72 0d 0a |our red.marrer..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 ba 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/nvme0n1p4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 38 13 00 |........?....8..|
00000020 00 00 00 00 80 00 80 00 ff 1f 09 1d 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 3c c0 9e 46 d2 9e 46 08 |........<..F..F.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 df b3 89 39 4e 4f 20 4e 41 4d 45 20 20 |..)...9NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 6.8G 0 6.8G 0% /dev
tmpfs tmpfs 1.4G 1.8M 1.4G 1% /run
/dev/sda2 ext4 228G 8.5G 208G 4% /
tmpfs tmpfs 6.9G 0 6.9G 0% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 6.9G 0 6.9G 0% /sys/fs/cgroup
/dev/loop1 squashfs 419M 419M 0 100% /snap/libreoffice/157
/dev/loop2 squashfs 55M 55M 0 100% /snap/core18/1223
/dev/loop3 squashfs 1.0M 1.0M 0 100% /snap/gnome-logs/81
/dev/loop4 squashfs 157M 157M 0 100% /snap/gnome-3-28-1804/110
/dev/loop0 squashfs 4.3M 4.3M 0 100% /snap/gnome-calculator/501
/dev/loop5 squashfs 150M 150M 0 100% /snap/gnome-3-28-1804/71
/dev/loop6 squashfs 55M 55M 0 100% /snap/core18/1265
/dev/loop9 squashfs 15M 15M 0 100% /snap/gnome-characters/367
/dev/loop7 squashfs 4.3M 4.3M 0 100% /snap/gnome-calculator/544
/dev/loop8 squashfs 15M 15M 0 100% /snap/gnome-characters/317
/dev/loop10 squashfs 90M 90M 0 100% /snap/core/8039
/dev/loop11 squashfs 45M 45M 0 100% /snap/gtk-common-themes/1353
/dev/loop12 squashfs 90M 90M 0 100% /snap/core/7917
/dev/sda1 vfat 511M 7.8M 504M 2% /boot/efi
tmpfs tmpfs 1.4G 36K 1.4G 1% /run/user/1000
/dev/nvme0n1p1 fuseblk 499M 436M 64M 88% /mnt/boot-sav/nvme0n1p1
/dev/nvme0n1p2 vfat 95M 27M 69M 29% /mnt/boot-sav/nvme0n1p2
/dev/nvme0n1p4 fuseblk 233G 42G 192G 18% /mnt/boot-sav/nvme0n1p4
=================== fdisk -l:
Disk /dev/loop0: 4.2 MiB, 4403200 bytes, 8600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 418.74 MiB, 439062528 bytes, 857544 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 54.52 MiB, 57151488 bytes, 111624 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 956 KiB, 978944 bytes, 1912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 156.7 MiB, 164290560 bytes, 320880 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 149.93 MiB, 157192192 bytes, 307016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 54.52 MiB, 57151488 bytes, 111624 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 4.2 MiB, 4403200 bytes, 8600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/nvme0n1: 232.91 GiB, 250059350016 bytes, 488397168 sectors
Disk model: Samsung SSD 970 EVO Plus 250GB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: F3BFDE03-0ED1-432F-9D43-D7A1459CAE2A
Device Start End Sectors Size Type
/dev/nvme0n1p1 2048 1023999 1021952 499M Windows recovery environment
/dev/nvme0n1p2 1024000 1226751 202752 99M EFI System
/dev/nvme0n1p3 1226752 1259519 32768 16M Microsoft reserved
/dev/nvme0n1p4 1259520 488396799 487137280 232.3G Microsoft basic data
Disk /dev/sda: 232.91 GiB, 250059350016 bytes, 488397168 sectors
Disk model: CT250MX500SSD4
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: C9387F8D-5639-47C3-8D71-9DA709F6892B
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 488396799 487346176 232.4G Linux filesystem
Disk /dev/loop8: 14.76 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop9: 14.76 MiB, 15458304 bytes, 30192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop10: 89.1 MiB, 93429760 bytes, 182480 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop11: 44.18 MiB, 46325760 bytes, 90480 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop12: 89.13 MiB, 93454336 bytes, 182528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
/usr/share/boot-sav/gui-tab-other.sh: ligne 93: _checkbutton_upload1 : commande introuvable
/usr/share/boot-sav/gui-tab-other.sh: ligne 93: _checkbutton_upload1 : commande introuvable
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/BOOT/mmx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 19.10
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 232.91 GiB, 250059350016 bytes, 488397168 sectors
Disk model: CT250MX500SSD4
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 488,397,167 488,397,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 488,396,799 487,346,176 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop10 squashfs
/dev/loop11 squashfs
/dev/loop12 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/loop9 squashfs
/dev/nvme0n1p1 8C169DE3169DCF18 ntfs Récupération
/dev/nvme0n1p2 9E9E-2CF6 vfat
/dev/nvme0n1p3
/dev/nvme0n1p4 08469ED2469EC03C ntfs WINDOWS
/dev/sda1 3989-B3DF vfat
/dev/sda2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Nov 17 13:48 ata-CT250MX500SSD4_1830E14B7B4F -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 17 13:48 ata-CT250MX500SSD4_1830E14B7B4F-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 17 13:48 ata-CT250MX500SSD4_1830E14B7B4F-part2 -> ../../sda2
lrwxrwxrwx 1 root root 13 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part4 -> ../../nvme0n1p4
lrwxrwxrwx 1 root root 13 Nov 17 13:48 nvme-eui.0025385691b602a4 -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-eui.0025385691b602a4-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-eui.0025385691b602a4-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-eui.0025385691b602a4-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-eui.0025385691b602a4-part4 -> ../../nvme0n1p4
lrwxrwxrwx 1 root root 9 Nov 17 13:48 wwn-0x500a0751e14b7b4f -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 17 13:48 wwn-0x500a0751e14b7b4f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 17 13:48 wwn-0x500a0751e14b7b4f-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/fuse /root/.cache/doc fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/fuse /run/user/1000/doc fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${initrdfail}" = 2 ]; then
set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
set next_entry="${prev_entry}"
set prev_entry=
save_env prev_entry
if [ "${next_entry}" ]; then
set initrdfail=2
fi
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function initrdfail {
if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
if [ -z "${initrdfail}" ]; then
set initrdfail=1
if [ -n "${boot_once}" ]; then
set prev_entry="${default}"
save_env prev_entry
fi
fi
save_env initrdfail
fi; fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
# previously #2c001e 44,0,30,0
# now yaru #4f194c 79,25,76
if background_color 79,25,76,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
linux /boot/vmlinuz-5.3.0-23-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro quiet splash $vt_handoff
initrd /boot/initrd.img-5.3.0-23-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
menuentry 'Ubuntu, with Linux 5.3.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-23-generic-advanced-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
echo 'Loading Linux 5.3.0-23-generic ...'
linux /boot/vmlinuz-5.3.0-23-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.3.0-23-generic
}
menuentry 'Ubuntu, with Linux 5.3.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-23-generic-recovery-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
echo 'Loading Linux 5.3.0-23-generic ...'
linux /boot/vmlinuz-5.3.0-23-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.3.0-23-generic
}
menuentry 'Ubuntu, with Linux 5.3.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-18-generic-advanced-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
echo 'Loading Linux 5.3.0-18-generic ...'
linux /boot/vmlinuz-5.3.0-18-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.3.0-18-generic
}
menuentry 'Ubuntu, with Linux 5.3.0-18-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-18-generic-recovery-b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
else
search --no-floppy --fs-uuid --set=root b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b
fi
echo 'Loading Linux 5.3.0-18-generic ...'
linux /boot/vmlinuz-5.3.0-18-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-5.3.0-18-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_linux_zfs ###
### END /etc/grub.d/10_linux_zfs ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=3989-B3DF /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
118.631969452 = 127.380107264 boot/grub/grub.cfg 2
4.860347748 = 5.218758656 boot/vmlinuz 2
4.860347748 = 5.218758656 boot/vmlinuz-5.3.0-18-generic 2
5.683467865 = 6.102577152 boot/vmlinuz-5.3.0-23-generic 1
6.537849426 = 7.019962368 boot/initrd.img 2
6.537849426 = 7.019962368 boot/initrd.img-5.3.0-18-generic 2
6.100196838 = 6.550036480 boot/initrd.img-5.3.0-23-generic 4
6.537849426 = 7.019962368 boot/initrd.img.old 2
ADDITIONAL INFORMATION :
=================== log of boot-info 20191117_1348 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 19.10, eoan, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 43 bits physical, 48 bits virtual
BOOT_IMAGE=/boot/vmlinuz-5.3.0-23-generic root=UUID=b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b ro quiet splash vt.handoff=7
The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Falling back to read-only mount because the NTFS partition is in an
unsafe state. Please resume and shutdown Windows fully (no hibernation
or fast restarting.)
Could not mount read-write, trying read-only
Windows is hibernated, refused to mount.
The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Falling back to read-only mount because the NTFS partition is in an
unsafe state. Please resume and shutdown Windows fully (no hibernation
or fast restarting.)
Could not mount read-write, trying read-only
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 19.10 CurrentSession:linux
/dev/nvme0n1p2@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
=================== blkid:
/dev/sda2: UUID="b891f2e3-2cc6-4790-8f0c-50f1ff9d1e4b" TYPE="ext4" PARTUUID="c3e74f6f-b366-45f6-9478-04659445f17f"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/nvme0n1p1: LABEL="RM-CM-)cupM-CM-)ration" UUID="8C169DE3169DCF18" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="d6ce8e4d-518c-4d30-be3c-986a425c8c10"
/dev/nvme0n1p2: UUID="9E9E-2CF6" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="3ca5748f-3e4f-4b6f-9a14-d653e21e2091"
/dev/nvme0n1p4: LABEL="WINDOWS" UUID="08469ED2469EC03C" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="78fb7f68-9793-4d2a-b4f8-b13247248bd8"
/dev/sda1: UUID="3989-B3DF" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="575119b3-cd00-422e-b874-d2f74e644861"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
/dev/nvme0n1p3: PARTLABEL="Microsoft reserved partition" PARTUUID="07e7f3fb-d92e-45bc-82e4-240499d2004b"
2 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on nvme0n1p4.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 oct. 17 14:34 grub.d
total 128
-rwxr-xr-x 1 root root 10627 oct. 11 15:57 00_header
-rwxr-xr-x 1 root root 6258 oct. 11 15:57 05_debian_theme
-rwxr-xr-x 1 root root 17123 oct. 11 15:57 10_linux
-rwxr-xr-x 1 root root 37613 oct. 11 15:57 10_linux_zfs
-rwxr-xr-x 1 root root 12894 oct. 11 15:57 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 oct. 11 15:57 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 11 15:57 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 11 15:57 40_custom
-rwxr-xr-x 1 root root 216 oct. 11 15:57 41_custom
-rw-r--r-- 1 root root 483 oct. 11 15:57 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=3989-B3DF (sda1)
Presence of EFI/Microsoft file detected: /mnt/boot-sav/nvme0n1p2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/nvme0n1p2/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/mmx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : substitution de commande: octet nul ignoré en entrée
=================== efibootmgr -v
BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 0002,0003
Boot0002* Windows Boot Manager HD(2,GPT,3ca5748f-3e4f-4b6f-9a14-d653e21e2091,0xfa000,0x31800)/File(EFIMICROSOFTBOOTBOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...3................
Boot0003* ubuntu HD(1,GPT,575119b3-cd00-422e-b874-d2f74e644861,0x800,0x100000)/File(EFIUBUNTUSHIMX64.EFI)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
nvme0n1p1 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/nvme0n1p1.
nvme0n1p2 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/nvme0n1p2.
nvme0n1p4 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/nvme0n1p4.
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
nvme0n1 : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:gpt:ATA CT250MX500SSD4:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:250GB:250GB:ext4::;
BYT;
/dev/nvme0n1:250GB:nvme:512:512:gpt:Samsung SSD 970 EVO Plus 250GB:;
1:1049kB:524MB:523MB:ntfs:Basic data partition:hidden, diag;
2:524MB:628MB:104MB:fat32:EFI system partition:boot, esp;
3:628MB:645MB:16.8MB::Microsoft reserved partition:msftres;
4:645MB:250GB:249GB:ntfs:Basic data partition:msftdata;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 4,2M
loop1 loop squashfs 418,7M
loop2 loop squashfs 54,5M
loop3 loop squashfs 956K
loop4 loop squashfs 156,7M
loop5 loop squashfs 149,9M
loop6 loop squashfs 54,5M
loop7 loop squashfs 4,2M
loop8 loop squashfs 14,8M
loop9 loop squashfs 14,8M
loop10 loop squashfs 89,1M
loop11 loop squashfs 44,2M
loop12 loop squashfs 89,1M
sda disk 232,9G
sda1 part vfat 512M
sda2 part ext4 232,4G
nvme0n1 disk 232,9G
nvme0n1p1 part ntfs 499M Récupération
nvme0n1p2 part vfat 99M
nvme0n1p3 part 16M
nvme0n1p4 part ntfs 232,3G WINDOWS
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 0 1 0 /snap/gnome-calculator/501
loop1 0 1 0 /snap/libreoffice/157
loop2 0 1 0 /snap/core18/1223
loop3 0 1 0 /snap/gnome-logs/81
loop4 0 1 0 /snap/gnome-3-28-1804/110
loop5 0 1 0 /snap/gnome-3-28-1804/71
loop6 0 1 0 /snap/core18/1265
loop7 0 1 0 /snap/gnome-calculator/544
loop8 0 1 0 /snap/gnome-characters/317
loop9 0 1 0 /snap/gnome-characters/367
loop10 0 1 0 /snap/core/8039
loop11 0 1 0 /snap/gtk-common-themes/1353
loop12 0 1 0 /snap/core/7917
sda 0 0 0 running
sda1 0 0 0 /boot/efi
sda2 0 0 0 /
nvme0n1 0 0 0 live
nvme0n1p1 0 0 0 /mnt/boot-sav/nvme0n1p1
nvme0n1p2 0 0 0 /mnt/boot-sav/nvme0n1p2
nvme0n1p3 0 0 0
nvme0n1p4 0 0 0 /mnt/boot-sav/nvme0n1p4
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=7109732k,nr_inodes=1777433,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1434024k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=22182)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
/var/lib/snapd/snaps/libreoffice_157.snap on /snap/libreoffice/157 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1223.snap on /snap/core18/1223 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_81.snap on /snap/gnome-logs/81 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_110.snap on /snap/gnome-3-28-1804/110 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_501.snap on /snap/gnome-calculator/501 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_71.snap on /snap/gnome-3-28-1804/71 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1265.snap on /snap/core18/1265 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_367.snap on /snap/gnome-characters/367 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_544.snap on /snap/gnome-calculator/544 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_317.snap on /snap/gnome-characters/317 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_8039.snap on /snap/core/8039 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1353.snap on /snap/gtk-common-themes/1353 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_7917.snap on /snap/core/7917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=1434020k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/fuse on /run/user/1000/doc type fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
gvfsd-fuse on /root/.cache/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/fuse on /root/.cache/doc type fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/nvme0n1p1 on /mnt/boot-sav/nvme0n1p1 type fuseblk (ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/nvme0n1p2 on /mnt/boot-sav/nvme0n1p2 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/nvme0n1p4 on /mnt/boot-sav/nvme0n1p4 type fuseblk (ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
=================== ls:
/sys/block/nvme0n1 (filtered): alignment_offset bdi capability dev device discard_alignment eui events events_async events_poll_msecs ext_range hidden holders inflight integrity lightnvm mq nsid nvme0n1p1 nvme0n1p2 nvme0n1p3 nvme0n1p4 power queue range removable ro size slaves stat subsystem trace uevent wwid
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hidraw1 hidraw2 hidraw3 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kfd kmsg lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null nvme0 nvme0n1 nvme0n1p1 nvme0n1p2 nvme0n1p3 nvme0n1p4 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout udmabuf uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero zfs
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/nvme0n1p1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 97 0f 00 00 00 00 00 |................|
00000030 55 a6 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U...............|
00000040 f6 00 00 00 01 00 00 00 18 cf 9d 16 e3 9d 16 8c |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/nvme0n1p2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 02 0e 1a |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 a0 0f 00 |........?.......|
00000020 00 18 03 00 f9 02 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 f6 2c 9e 9e 4e 4f 20 4e 41 4d 45 20 20 |..).,..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 45 72 |..............Er|
000001b0 72 2e 20 64 69 73 71 75 65 ff 0d 0a 50 72 65 73 |r. disque...Pres|
000001c0 73 65 7a 20 75 6e 65 20 74 6f 75 63 68 65 20 70 |sez une touche p|
000001d0 6f 75 72 20 72 65 64 82 6d 61 72 72 65 72 0d 0a |our red.marrer..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 ba 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/nvme0n1p4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 38 13 00 |........?....8..|
00000020 00 00 00 00 80 00 80 00 ff 1f 09 1d 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 3c c0 9e 46 d2 9e 46 08 |........<..F..F.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 df b3 89 39 4e 4f 20 4e 41 4d 45 20 20 |..)...9NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 6.8G 0 6.8G 0% /dev
tmpfs tmpfs 1.4G 1.8M 1.4G 1% /run
/dev/sda2 ext4 228G 8.5G 208G 4% /
tmpfs tmpfs 6.9G 0 6.9G 0% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 6.9G 0 6.9G 0% /sys/fs/cgroup
/dev/loop1 squashfs 419M 419M 0 100% /snap/libreoffice/157
/dev/loop2 squashfs 55M 55M 0 100% /snap/core18/1223
/dev/loop3 squashfs 1.0M 1.0M 0 100% /snap/gnome-logs/81
/dev/loop4 squashfs 157M 157M 0 100% /snap/gnome-3-28-1804/110
/dev/loop0 squashfs 4.3M 4.3M 0 100% /snap/gnome-calculator/501
/dev/loop5 squashfs 150M 150M 0 100% /snap/gnome-3-28-1804/71
/dev/loop6 squashfs 55M 55M 0 100% /snap/core18/1265
/dev/loop9 squashfs 15M 15M 0 100% /snap/gnome-characters/367
/dev/loop7 squashfs 4.3M 4.3M 0 100% /snap/gnome-calculator/544
/dev/loop8 squashfs 15M 15M 0 100% /snap/gnome-characters/317
/dev/loop10 squashfs 90M 90M 0 100% /snap/core/8039
/dev/loop11 squashfs 45M 45M 0 100% /snap/gtk-common-themes/1353
/dev/loop12 squashfs 90M 90M 0 100% /snap/core/7917
/dev/sda1 vfat 511M 7.8M 504M 2% /boot/efi
tmpfs tmpfs 1.4G 36K 1.4G 1% /run/user/1000
/dev/nvme0n1p1 fuseblk 499M 436M 64M 88% /mnt/boot-sav/nvme0n1p1
/dev/nvme0n1p2 vfat 95M 27M 69M 29% /mnt/boot-sav/nvme0n1p2
/dev/nvme0n1p4 fuseblk 233G 42G 192G 18% /mnt/boot-sav/nvme0n1p4
=================== fdisk -l:
Disk /dev/loop0: 4.2 MiB, 4403200 bytes, 8600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 418.74 MiB, 439062528 bytes, 857544 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 54.52 MiB, 57151488 bytes, 111624 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 956 KiB, 978944 bytes, 1912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 156.7 MiB, 164290560 bytes, 320880 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 149.93 MiB, 157192192 bytes, 307016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 54.52 MiB, 57151488 bytes, 111624 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 4.2 MiB, 4403200 bytes, 8600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/nvme0n1: 232.91 GiB, 250059350016 bytes, 488397168 sectors
Disk model: Samsung SSD 970 EVO Plus 250GB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: F3BFDE03-0ED1-432F-9D43-D7A1459CAE2A
Device Start End Sectors Size Type
/dev/nvme0n1p1 2048 1023999 1021952 499M Windows recovery environment
/dev/nvme0n1p2 1024000 1226751 202752 99M EFI System
/dev/nvme0n1p3 1226752 1259519 32768 16M Microsoft reserved
/dev/nvme0n1p4 1259520 488396799 487137280 232.3G Microsoft basic data
Disk /dev/sda: 232.91 GiB, 250059350016 bytes, 488397168 sectors
Disk model: CT250MX500SSD4
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: C9387F8D-5639-47C3-8D71-9DA709F6892B
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 488396799 487346176 232.4G Linux filesystem
Disk /dev/loop8: 14.76 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop9: 14.76 MiB, 15458304 bytes, 30192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop10: 89.1 MiB, 93429760 bytes, 182480 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop11: 44.18 MiB, 46325760 bytes, 90480 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop12: 89.13 MiB, 93454336 bytes, 182528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
/usr/share/boot-sav/gui-tab-other.sh: ligne 93: _checkbutton_upload1 : commande introuvable
/usr/share/boot-sav/gui-tab-other.sh: ligne 93: _checkbutton_upload1 : commande introuvable
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.
On y voit que le NVMe a bien été détecté
lrwxrwxrwx 1 root root 13 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 15 Nov 17 13:48 nvme-Samsung_SSD_970_EVO_Plus_250GB_S4EUNF0M662342H-part4 -> ../../nvme0n1p4
Mais boot-info ne sait pas en dire plus (c'est depuis bien longtemps le cas)
On voit que tu as un disque ATA qui est reconnu et qui contient UBUNTU et que le dual boot est bien installé
lrwxrwxrwx 1 root root 9 Nov 17 13:48 ata-CT250MX500SSD4_1830E14B7B4F -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 17 13:48 ata-CT250MX500SSD4_1830E14B7B4F-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 17 13:48 ata-CT250MX500SSD4_1830E14B7B4F-part2 -> ../../sda2
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 19.10 CurrentSession:linux
/dev/nvme0n1p2@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
On voit cette anomalie
The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Falling back to read-only mount because the NTFS partition is in an
unsafe state. Please resume and shutdown Windows fully (no hibernation
or fast restarting.)
Could not mount read-write, trying read-only
Si tu souhaites accéder aux partitions NTFS de windows en mode écriture, au choix
a) Tu supprimes le mode hibernation de windows
https://www.papergeek.fr/windows-10-com … ide-188716
ou en ligne de commandes a faire en mode administratif https://docs.microsoft.com/en-us/window … ne-options
b) Lorsqte tu es sous windows, tu choisis de l'arrêter en choisissant l'option REDEMARRER afin qu'il libère les disques et aussi la connectique WIFI/BlueTooth
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#81 Le 18/11/2019, à 16:45
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
On voit cette anomalie
The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Falling back to read-only mount because the NTFS partition is in an
unsafe state. Please resume and shutdown Windows fully (no hibernation
or fast restarting.)
Could not mount read-write, trying read-only
Si tu souhaites accéder aux partitions NTFS de windows en mode écriture, au choix
a) Tu supprimes le mode hibernation de windows
Bonjour geole,
j'ai donc supprimé le mode hibernation et le "fast boot" de Windows.
"cette anomalie" a disparu dans un nouveau boot-info.
Ensuite j'ai rebranché le disque de stockage SSD (qui n'est pas NVMe) dans le port SATA 1 et malgré une page de messages d'erreur trop vite disparue, Ubuntu a démarré et fonctionne normalement. Ce disque (vide) est bien visible aussi bien dans Ubuntu que dans Windows. Ensuite j'ai rebranché le lecteur de CD et j'ai obtenu un écran de la couleur violette d'Ubuntu 19.10 mais Ubuntu n'a pas démarré. J'ai débranché le lecteur de CD et au redémarrage de l'ordinateur Ubuntu a démarré normalement.
Je crois que j'ai la preuve que le contrôleur du lecteur de CD de marque ASUS est à l'origine du blocage.
Pour appliquer les conseils de ton message n°80, j'aurai besoin d'un peu de détails pour créer les fichiers /var/log/syslog et les transmettre ici.
Hors ligne
#82 Le 18/11/2019, à 18:38
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Bonjour
Merci du diagnostic.
Il faut donc donner comme conseil de débrancher le contrôleur du lecteur CD pour pouvoir booter. Ce qui ne gène en rien puisqu'il y a d'autres techniques.
Reste le problème de fond: Tu ne peux pas utiliser le CD-ROM en utilisation normale!
1) Installation de la trace
Modifier le fichier de configuration du grub, ( /etc/default/grub pour mettre les grosses traces
gedit admin:///etc/default/grub
La ligne à modifier commence par le mot clé "GRUB_CMDLINE_LINUX=". A titre d'exemple, chez moi, elle est
GRUB_CMDLINE_LINUX="debug ignore_loglevel quiet splash fsck.mode=force fsck.repair=yes vt.handoff=7"
Je te propose de mettre
GRUB_CMDLINE_LINUX="debug loglevel=7 systemd.log_level=debug "
2) Faire prendre en charge la modification avec cette commande
sudo update-grub
3) Faire la capture
Il faut donc rebooter en branchant le CD-ROM Ce qui va bloquer.
Il faut donc rebooter en débranchant le CD-ROM
4) Tu donneras le contenu du fichier /var/log/syslog
Pour que cela soit simple, tu utiliseras un serveur http://paste.debian.net/ qui permet de sélectionner un fichier
Il devrait tout contenir si tu fais les deux essais dans la même journée
sinon, celui de la veille se nomme /etc/var/log/syslog.1
5) Je regarderais le contenu et partirais à la recherche des erreurs connues.
Dernière modification par geole (Le 19/11/2019, à 17:32)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#83 Le 19/11/2019, à 16:54
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Merci geole,
J'ai trouvé la ligne
GRUB_CMDLINE_LINUX= " "
que j'ai complétée :
GRUB_CMDLINE_LINUX= "debug loglevel=7 systemd.log_level=debug"
après enregistrement, j'ai vérifié dans
gedit admin:///etc/default/grub
et la modification était visible.
Ensuite avec le lecteur de CD-ROM branché : j'obtiens un écran violet mais pas de boot.
Ensuite avec le lecteur de CD-ROM débranché : j'obtiens un boot normal, et dans le terminal j'introduis
/etc/var/log/syslog
, et j'obtiens un warning :
bash: /etc/var/log/syslog : Aucun fichier ou dossier de ce type
.
Je me demande si j'ai modifié la bonne ligne : il y avait deux lignes qui commençaient avec les mêmes mots, la première c'était :
GRUB_CMDLINE_LINUX_DEFAULT= "quiet splash"
que je n'ai pas modifiée.
Dernière modification par lysbleu (Le 19/11/2019, à 17:01)
Hors ligne
#84 Le 19/11/2019, à 17:35
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Bonjour
As-tu aussi fait la commande
sudo update-grub
De toutes façons, je me suis trompé dans le nom du fichier
Donne dèjà ce qui a été collecté: Le fichier se nomme /var/log/syslog
Dernière modification par geole (Le 19/11/2019, à 17:35)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#85 Le 19/11/2019, à 18:15
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
oui j'avais bien fait le sudo update-grub.
J'ai entré le /var/log/syslog et j'obtiens :
bash: /var/log/syslog: Permission non accordée
Hors ligne
#86 Le 19/11/2019, à 20:20
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Cela, je n'y avais pas trop pensé!
Le plus simple est d'autoriser la lecture
sudo chmod 744 /var/log/syslog
Dernière modification par geole (Le 19/11/2019, à 20:20)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#87 Le 19/11/2019, à 23:45
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
J'ai essayé d'autoriser la lecture avec "sudo chmod 744 /var/log/syslog" mais j'obtiens encore le bash "Permission non accordée".
J'ai refait un sudo update-grub et j'ai recommencé l'autorisation puis le /var/log/syslog et le résultat c'est la capture d'écran ci-dessus : Permission non accordée.
Dernière modification par lysbleu (Le 19/11/2019, à 23:46)
Hors ligne
#88 Le 20/11/2019, à 00:06
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Tu me pièges, je n'ai pas de réponse.
Essaie de le dupliquer pour le mettre chez toi.
cp /var/log/syslog syslog.txt
si toujours un refus, ajoute le préfixe sudo
Dernière modification par geole (Le 20/11/2019, à 00:07)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#89 Le 20/11/2019, à 15:17
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Hors ligne
#90 Le 20/11/2019, à 15:41
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Bonjour
Ta premiere commande a bien fonctionné.
Pour la seconde commande, tu n'en as écrit qu'une partie.
Tu peux regarder le volume du fichier avec cette commande qui va donner le nombre de lignes, de mots et de caractères.
wc syslog.txt
Tu peux donc l'expédier par pastebin
N'oublie pas de donner le lien.
C'est indiqué, à la fin de la zone de saisie. Par exemple
Information about your entry
To link to your entry use: paste.debian.net/1117109
To download your entry use: paste.debian.net/download/1117109
To see your entry as plain text use: paste.debian.net/plain/1117109
To delete your entry use: paste.debian.net/delete/2deed3e53229431b5d97745b43ff23e048bb5c42
Au lieu de faire des captures d'écrans, tu aurais pu faire un copier/coller des messages d'erreur.
Dernière modification par geole (Le 20/11/2019, à 15:44)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#91 Le 20/11/2019, à 19:47
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
voici un copié-collé :
dd@MSI:~$ gedit admin:///etc/default/grub
** (org.gnome.gedit:4049): WARNING **: 18:17:09.915: L’emplacement indiqué n’est pas monté
dd@MSI:~$ /var/log/syslog
bash: /var/log/syslog: Permission non accordée
dd@MSI:~$ cp /var/log/syslog syslog.txt
dd@MSI:~$ wc syslog.txt
50123 619887 6527696 syslog.txt
dd@MSI:~$ /var/log/syslog
bash: /var/log/syslog: Permission non accordée
dd@MSI:~$ sudo cp /var/log/syslog syslog.txt
[sudo] Mot de passe de dd :
dd@MSI:~$
Je vois bien les nombres (impressionnants !) de lignes, de mots et de caractères. Mais je ne vois pas le fichier à expédier par pastebin...
Hors ligne
#92 Le 20/11/2019, à 21:44
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Bonsoir,
Je viens de réaliser que le lien que je t'ai donné ne permet pas de transférer un fichier si volumineux!
Si tu as un cloud , tu pourrais le mettre dedans
Je te propose de faire ces commandes pour découper le début
cat /var/log/syslog | head -2000 | tail -2000 > trace1.txt
cat /var/log/syslog | head -4000 | tail -2000 > trace2.txt
cat /var/log/syslog | head -6000 | tail -2000 > trace3.txt
cat /var/log/syslog | head -8000 | tail -2000 > trace4.txt
On va arrêter le découpage à ce niveau car je pense que cela sera suffisant
puis tu fait
cat trace1.txt
afin d'afficher le contenu du fichier
puis un copier/coller dans la zone de la discussion et tu mets en forme avec le lien texte préformaté au lieu du lien bloc de citation
tu fais un nouveau message à chaque fichier
Dernière modification par geole (Le 20/11/2019, à 21:45)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#93 Le 21/11/2019, à 13:47
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Bonjour geole,
J'ai essayé d'ouvrir un espace cloud chez mon fournisseur d'accès (Orange) mais apparemment ce n'est possible que sous Windows. Alors j'ai essayé de copier le "trace1.txt" mais à ma grande surprise j'ai obtenu dans mon "dossier personnel" cinq fichiers : un "syslog.txt" et les quatre fichiers "trace1.txt" "trace2.txt" "trace3.txt" et "trace4.txt". Voici le "trace1.txt" :
x-special/nautilus-clipboard
copy
file:///home/dd/trace1.txt
Hors ligne
#94 Le 21/11/2019, à 13:53
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Bonjour.
Il faut que tu l'ouvres chez toi et que tu en fasses un copier/coller
Dernière modification par geole (Le 21/11/2019, à 13:53)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#95 Le 21/11/2019, à 14:54
- lykhead
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
bonjour,
regarde bien dans l'ordre de boot que le cd soit en mode uefi dans le bios. c'est le cas j'avais mal vu sur ta capture d’écran du bios
sinon essaye avec d'autre distribution. ou une ubuntu plus récente comme la 19.10
et créer une liveusb sa se trouve ton dvd d'installation est corrompu
Dernière modification par lykhead (Le 21/11/2019, à 15:16)
il n'y a jamais de bon ou de mauvais choix, uniquement des directions qui diffèrent.
Fedora 35
MSI A320M pro / A10-9700 AMD APU w/ Radeon R7 3,8 GHz / 8Ghz
SSD 120Go / HDD 4To
Hors ligne
#96 Le 21/11/2019, à 15:15
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Bonjour lykhead,
J'ai installé ubuntu 19.10 avec un live USB car c'était impossible de booter avec le lecteur de CD ROM.
J'ai la preuve que c'est le lecteur de CD ROM qui empeche de booter, il suffit de le débrancher et Ubuntu 19.10 démarre.
Nos essais à présent ont pour but de lever ce blocage, afin de permettre d'utiliser le lecteur CD ROM en usage normal.
Hors ligne
#97 Le 21/11/2019, à 15:48
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
J'ai le log d'aujourd'hui. Alors qu'il me semble que c'est hier que tu as fais l'essai
Je ne sais pas si cette commande va sortir la totalité des traces, mais cela vaut le coup de l'essayer
sudo journalctl --no-pager --since "2019-11-20 02:00" --until "2019-11-20 23:00" >Trace0.txt && gedit Trace0.txt
tu remplaceras 02:00 par quelques minutes avant le début du boot qui a foiré
tu remplaceras 23:00 par quelques minutes après le second boot qui est reparti. Tu donneras le retour de Trace0.txt qui sera affiché.
Je ne sais pas si les traces détaillées seront données, Si Oui, c'est plus simple.
Je ne sais pas pourquoi je n'y ai pas pensé tout de suite.
Dernière modification par geole (Le 21/11/2019, à 15:53)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#98 Le 21/11/2019, à 15:55
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Si tu peux dire vers quelle heure tu as fais l'essai de boot raté, Cela me permettra de me positionner rapidement
Cet essai date de plusieurs jours, je crois préférable de recommencer maintenant un essai de boot avec le lecteur de CD ROM branché, puis de refaire tout de suite les procédures à partir de ton message n°35. J'imagine qu'ainsi tu pourras retrouver la bonne trace immédiatement. Quel est ton avis ?
Hors ligne
#99 Le 21/11/2019, à 15:59
- geole
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Oui, dans ce cas, c'est plus simple.
Tu noteras les heures:minutes du boot qui rate.
Fais la commande date pour synchroniser ta montre.
Puis fais la commande prévue dans ce message. https://forum.ubuntu-fr.org/viewtopic.p … #p22181656
Dernière modification par geole (Le 21/11/2019, à 15:59)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#100 Le 21/11/2019, à 16:30
- lysbleu
Re : Ubuntu 18.04.3 est-il compatible avec carte mère MSI ? RESOLU
Oui, dans ce cas, c'est plus simple.
Tu noteras les heures:minutes du boot qui rate.
Fais la commande date pour synchroniser ta montre.
Puis fais la commande prévue dans ce message. https://forum.ubuntu-fr.org/viewtopic.p … #p22181656
L'essai de boot bloqué à 15h06.
Je ne trouve pas le message 22181656.
Je ne sais plus si je dois refaire les commandes depuis ton message n°85, ou uniquement la ligne
sudo journalctl --no-pager --since "2019-11-21 15:02" --until "2019-11-21 15:45" >Trace0.txt && gedit Trace0.txt
Hors ligne