Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 18/05/2021, à 21:01

Chveïk2

[Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour,
J'ai branché en Usb mon imprimante Brother DCP195C,  elle est reconnue elle reçoit les données de U20.04 mais ne démarre pas l'impression. J'ai bien tenté le script de démonipuch mais je n'ai pas su aller au bout, il s'est arrêté au milieu. Mon pc est un Dell Inspiron 15 3550
Et puis j'ai un petit souci avec certains codecs qui ne sont pas installés qui permettent de visionner des gif ou des vidéos sur RS,  Twitter particulièrement . En fait je ne sais pas si le message émane de Firefox ou de Twitter.
Merci de votre aide.

Dernière modification par Ayral (Le 01/06/2021, à 09:43)

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#2 Le 18/05/2021, à 21:04

xubu1957

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour,

Il faudrait fournir > les Informations utiles à donner lorsque j'ai un problème.

_ _ _

Pour les codecs.

§ 3 > doc.ubuntu-fr.org/formats_non-libres#principaux_formats_non-libres

Avec des images > lafibre.info/tutoriels-linux/ubuntu-restricted-extras

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#3 Le 26/05/2021, à 19:08

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Imprimante  multi fonction BROTHER DCP 95C
Bonjour
Quelqu'un pourrait m'aider ? Mon imprimante est reconnue mais quand j'envoie un document l'imprimante reçoit les données mais n'imprime pas. J'ai tenté le script de Demonipuch sans succès.  Quand j'essaie de scanner avec le programme de U20.04 il m'annonce qu'il faut des pilotes.
D'autre part les codecs pour les vidéos ont disparu entre la mise à jour de U18.04 vers U20.04, comment les récupérer ? Quand je vais sur la page mise en lien précédemment et que je clique sur le lien, il m'affiche que les paquets sont déjà présents.
Merci d'avance.

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#4 Le 26/05/2021, à 19:32

xubu1957

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour,

Dans le tutoriel épinglé, sylvain 3800 a écrit :


A ] les infos sur ton système qu'il faudrait donner quelque soit le problème

c'est important donc copie colle le retour de cette commande :

 cat /etc/lsb-release && uname -ir && groups && lsusb

avec cela on saura pas mal de chose concernant ton système et son architecture c'est utile pour proposer des pilotes

B.2 )Les infos a donner quel que soit la marque de l'imprimante 

il suffit de copier/coller ces commandes :

dpkg -l | grep cups
lpstat -t
/usr/sbin/lpinfo -v
cat /var/log/cups/error_log
dpkg -l | grep -v ^ii

Lire le premier message du tutoriel Retour utilisable de commande

Méthode détaillée :

cqfd93 a écrit :

Bonjour,

Entrer des commandes dans un terminal et donner le résultat - Voilà la marche à suivre :

  1. Ouvre le terminal avec ctrl-alt-t

  2. Sélectionne la commande voulue avec un triple clic (ça sélectionne toute la ligne, même la fin si on ne la voit pas)

  3. Colle-la dans le terminal avec un clic molette, valide avec Entrée

  4. Sélectionne et copie tout ce que te dit le terminal depuis la commande jusqu'à la dernière ligne incluse

  5. Clique sur le <> de l'éditeur de message

    1530289742.png

  6. Colle là où se trouve le curseur (entre le ] et le [)

  7. Refais toutes les étapes depuis la 2 pour les autres commandes.

Dernière modification par xubu1957 (Le 26/05/2021, à 19:33)

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#5 Le 26/05/2021, à 20:08

eric63

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Salut

J'ai bien tenté le script de démonipuch mais je n'ai pas su aller au bout, il s'est arrêté au milieu

il y a un fichier qui retrace les manips que tu as fait lors du script
il est créé dans le dossier demonipuchxxxxxxx dans ton dossier perso et se nomme brprinter-installer.log
est ce que tu peux nous copier le contenu intégral pour savoir ce qui manque

Kubuntu 24.10  Wayland Plasma 6.1.5 KDE 6.6.0 Qt 6.6.2 et noyau 6.11.0-9  Asus B760+D4  i5-12400F 4.4Ghz DDR4 32Go nvidia RTX 3060 12GB
Utilisez les drivers libres avant d’ installer une brother avec le script de demonipuch
J’utilise le clavier french AFNOR

Hors ligne

#6 Le 27/05/2021, à 14:06

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour xubu 957 ,
les retours : 

laurent@laurent-Inspiron-3505:~$  cat /etc/lsb-release && uname -ir && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.2 LTS"
5.4.0-73-generic x86_64
laurent adm cdrom sudo dip plugdev lpadmin sambashare
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 0cf3:e009 Qualcomm Atheros Communications 
Bus 003 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0c45:671e Microdia Integrated_Webcam_HD
Bus 001 Device 002: ID 1ea7:0064 SHARKOON Technologies GmbH 2.4G Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
laurent@laurent-Inspiron-3505:~$ dpkg -l | grep cups
ii  bluez-cups                                 5.53-0ubuntu3.1                       amd64        Bluetooth printer driver for CUPS
ii  cups                                       2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-browsed                               1.27.4-1                              amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                                   2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                                2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                                2.3.1-9ubuntu1.1                      all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                          2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                                2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                               1.27.4-1                              amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers                  1.27.4-1                              amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                             2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                             0.2.6-1ubuntu3                        amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                                  2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                         2.3.1-9ubuntu1.1                      all          Common UNIX Printing System(tm) - server common files
ii  libcups2:amd64                             2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - Core library
ii  libcupsfilters1:amd64                      1.27.4-1                              amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                        2.3.1-9ubuntu1.1                      amd64        Common UNIX Printing System(tm) - Raster image library
ii  printer-driver-hpcups                      3.20.3+dfsg0-2                        amd64        HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii  python3-cups                               1.9.73-3build1                        amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                        1.5.12-0ubuntu1.1                     all          Python utility modules around the CUPS printing system
laurent@laurent-Inspiron-3505:~$ lpstat -t
scheduler is running
no system default destination
matériel pour CUPS-BRF-Printer : cups-brf:/
matériel pour DCP-195C : usb://Brother/DCP-195C?serial=BROE3F274836
CUPS-BRF-Printer accepte des requêtes depuis mer. 26 mai 2021 18:10:54
DCP-195C accepte des requêtes depuis mer. 26 mai 2021 18:10:11
printer CUPS-BRF-Printer is idle.  enabled since mer. 26 mai 2021 18:10:54
printer DCP-195C is idle.  enabled since mer. 26 mai 2021 18:10:11
laurent@laurent-Inspiron-3505:~$ /usr/sbin/lpinfo -v
file cups-brf:/
network ipps
network lpd
network beh
network http
network https
network socket
direct hp
network ipp
direct hpfax
laurent@laurent-Inspiron-3505:~$ cat /var/log/cups/error_log
I [27/May/2021:09:23:03 +0200] Listening to [v1.::1]:631 (IPv6)
I [27/May/2021:09:23:03 +0200] Listening to 127.0.0.1:631 (IPv4)
I [27/May/2021:09:23:03 +0200] Listening to /run/cups/cups.sock (Domain)
I [27/May/2021:09:23:03 +0200] Remote access is disabled.
D [27/May/2021:09:23:03 +0200] Added auto ServerAlias laurent-Inspiron-3505
I [27/May/2021:09:23:03 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
D [27/May/2021:09:23:03 +0200] Using keychain "/etc/cups/ssl" for server name "laurent-Inspiron-3505".
I [27/May/2021:09:23:03 +0200] Using default TempDir of /var/spool/cups/tmp...
I [27/May/2021:09:23:03 +0200] Configured for up to 100 clients.
I [27/May/2021:09:23:03 +0200] Allowing up to 100 client connections per host.
I [27/May/2021:09:23:03 +0200] Using policy "default" as the default.
I [27/May/2021:09:23:03 +0200] Full reload is required.
I [27/May/2021:09:23:03 +0200] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 78 types, 118 filters...
D [27/May/2021:09:23:03 +0200] Loading printer CUPS-BRF-Printer...
D [27/May/2021:09:23:03 +0200] load_ppd: Loading /var/cache/cups/CUPS-BRF-Printer.data...
D [27/May/2021:09:23:03 +0200] cupsdRegisterPrinter(p=0x55db1f690f80(CUPS-BRF-Printer))
D [27/May/2021:09:23:03 +0200] Loading printer DCP-195C...
D [27/May/2021:09:23:03 +0200] load_ppd: Loading /var/cache/cups/DCP-195C.data...
D [27/May/2021:09:23:03 +0200] cupsdRegisterPrinter(p=0x55db1f69b5b0(DCP-195C))
I [27/May/2021:09:23:03 +0200] Loading job cache file "/var/cache/cups/job.cache"...
D [27/May/2021:09:23:03 +0200] [Job 8] Loading from cache...
D [27/May/2021:09:23:03 +0200] [Job 8] Loading attributes...
D [27/May/2021:09:23:03 +0200] [Job 8] Unloading...
D [27/May/2021:09:23:03 +0200] [Job 9] Loading from cache...
D [27/May/2021:09:23:03 +0200] [Job 9] Loading attributes...
D [27/May/2021:09:23:03 +0200] [Job 9] Unloading...
D [27/May/2021:09:23:03 +0200] [Job 10] Loading from cache...
D [27/May/2021:09:23:03 +0200] [Job 10] Loading attributes...
D [27/May/2021:09:23:03 +0200] [Job 10] Unloading...
D [27/May/2021:09:23:03 +0200] [Job 11] Loading from cache...
D [27/May/2021:09:23:03 +0200] [Job 11] Loading attributes...
D [27/May/2021:09:23:03 +0200] [Job 11] Unloading...
D [27/May/2021:09:23:03 +0200] [Job 12] Loading from cache...
D [27/May/2021:09:23:03 +0200] [Job 12] Loading attributes...
D [27/May/2021:09:23:03 +0200] [Job 12] Unloading...
I [27/May/2021:09:23:03 +0200] Full reload complete.
D [27/May/2021:09:23:03 +0200] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [27/May/2021:09:23:03 +0200] Cleaning out old files in "/var/spool/cups/tmp".
D [27/May/2021:09:23:03 +0200] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [27/May/2021:09:23:03 +0200] Cleaning out old files in "/var/cache/cups".
D [27/May/2021:09:23:03 +0200] service_checkin: pid=907
D [27/May/2021:09:23:03 +0200] service_checkin: 1 listeners.
D [27/May/2021:09:23:03 +0200] service_add_listener: Listener #1 at fd 3, "/run/cups/cups.sock".
D [27/May/2021:09:23:03 +0200] service_add_listener: Matched existing listener #1 to /run/cups/cups.sock.
D [27/May/2021:09:23:03 +0200] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
D [27/May/2021:09:23:03 +0200] Calling FindDeviceById(cups-CUPS-BRF-Printer)
D [27/May/2021:09:23:03 +0200] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-CUPS-BRF-Printer\' does not exist
D [27/May/2021:09:23:03 +0200] Using profile ID "CUPS-BRF-Printer-Gray..".
D [27/May/2021:09:23:03 +0200] Calling CreateProfile(CUPS-BRF-Printer-Gray..,temp)
D [27/May/2021:09:23:03 +0200] Created profile "/org/freedesktop/ColorManager/profiles/CUPS_BRF_Printer_Gray__".
I [27/May/2021:09:23:03 +0200] Registering ICC color profiles for "CUPS-BRF-Printer".
D [27/May/2021:09:23:03 +0200] Calling CreateDevice(cups-CUPS-BRF-Printer,temp)
D [27/May/2021:09:23:03 +0200] Created device "/org/freedesktop/ColorManager/devices/cups_CUPS_BRF_Printer".
D [27/May/2021:09:23:03 +0200] Calling /org/freedesktop/ColorManager/devices/cups_CUPS_BRF_Printer:AddProfile(/org/freedesktop/ColorManager/profiles/CUPS_BRF_Printer_Gray__) [soft]
D [27/May/2021:09:23:03 +0200] Calling FindDeviceById(cups-DCP-195C)
D [27/May/2021:09:23:03 +0200] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-DCP-195C\' does not exist
D [27/May/2021:09:23:03 +0200] Using profile ID "DCP-195C-Gray..".
D [27/May/2021:09:23:03 +0200] Calling CreateProfile(DCP-195C-Gray..,temp)
D [27/May/2021:09:23:03 +0200] Created profile "/org/freedesktop/ColorManager/profiles/DCP_195C_Gray__".
I [27/May/2021:09:23:03 +0200] Registering ICC color profiles for "DCP-195C".
D [27/May/2021:09:23:03 +0200] Calling CreateDevice(cups-DCP-195C,temp)
D [27/May/2021:09:23:03 +0200] Created device "/org/freedesktop/ColorManager/devices/cups_DCP_195C".
D [27/May/2021:09:23:03 +0200] Calling /org/freedesktop/ColorManager/devices/cups_DCP_195C:AddProfile(/org/freedesktop/ColorManager/profiles/DCP_195C_Gray__) [soft]
I [27/May/2021:09:23:03 +0200] Listening to [v1.::1]:631 on fd 7...
I [27/May/2021:09:23:03 +0200] Listening to 127.0.0.1:631 on fd 8...
I [27/May/2021:09:23:03 +0200] Listening to /run/cups/cups.sock on fd 3...
I [27/May/2021:09:23:03 +0200] Resuming new connection processing...
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:09:23:03 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:09:23:03 +0200] Discarding unused server-started event...
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:09:23:03 +0200] [Client 1] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:23:03 +0200] [Client 1] Accepted from localhost (Domain)
D [27/May/2021:09:23:03 +0200] [Client 1] Waiting for request.
D [27/May/2021:09:23:03 +0200] Report: clients=1
D [27/May/2021:09:23:03 +0200] Report: jobs=5
D [27/May/2021:09:23:03 +0200] Report: jobs-active=0
D [27/May/2021:09:23:03 +0200] Report: printers=2
D [27/May/2021:09:23:03 +0200] Report: stringpool-string-count=820
D [27/May/2021:09:23:03 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:09:23:03 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:09:23:03 +0200] [Client 1] POST / HTTP/1.1
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:09:23:03 +0200] [Client 1] Read: status=200, state=6
D [27/May/2021:09:23:03 +0200] [Client 1] No authentication data provided.
D [27/May/2021:09:23:03 +0200] [Client 1] 2.0 Create-Printer-Subscriptions 1
D [27/May/2021:09:23:03 +0200] Create-Printer-Subscriptions /
D [27/May/2021:09:23:03 +0200] create_subscriptions(con=0x55db1f76a630(1), uri="/")
D [27/May/2021:09:23:03 +0200] pullmethod="ippget"
D [27/May/2021:09:23:03 +0200] notify-lease-duration=86400
D [27/May/2021:09:23:03 +0200] notify-time-interval=60
D [27/May/2021:09:23:03 +0200] cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
D [27/May/2021:09:23:03 +0200] Added subscription #99 for server.
D [27/May/2021:09:23:03 +0200] cupsdMarkDirty(----S)
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [27/May/2021:09:23:03 +0200] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [27/May/2021:09:23:03 +0200] [Client 1] Content-Length: 107
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:03 +0200] [Client 1] con->http=0x55db1f6f6510
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55db1f7c2b00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:03 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:03 +0200] [Client 1] bytes=0, http_state=0, data_remaining=107
D [27/May/2021:09:23:03 +0200] [Client 1] Flushing write buffer.
D [27/May/2021:09:23:03 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:03 +0200] [Client 1] Waiting for request.
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:03 +0200] [Client 2] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:23:03 +0200] [Client 2] Accepted from localhost (Domain)
D [27/May/2021:09:23:03 +0200] [Client 2] Waiting for request.
D [27/May/2021:09:23:03 +0200] [Client 2] POST / HTTP/1.1
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:03 +0200] [Client 2] Read: status=200, state=6
D [27/May/2021:09:23:03 +0200] [Client 2] No authentication data provided.
D [27/May/2021:09:23:03 +0200] [Client 2] 2.0 CUPS-Get-Default 2
D [27/May/2021:09:23:03 +0200] CUPS-Get-Default
D [27/May/2021:09:23:03 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [27/May/2021:09:23:03 +0200] [Client 2] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [27/May/2021:09:23:03 +0200] [Client 2] Content-Length: 124
D [27/May/2021:09:23:03 +0200] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:03 +0200] [Client 2] con->http=0x55db1f6f9bb0
D [27/May/2021:09:23:03 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x55db1f7859a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:03 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:03 +0200] [Client 2] bytes=0, http_state=0, data_remaining=124
D [27/May/2021:09:23:03 +0200] [Client 2] Flushing write buffer.
D [27/May/2021:09:23:03 +0200] [Client 2] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:03 +0200] [Client 2] Waiting for request.
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:03 +0200] [Client 2] POST / HTTP/1.1
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:03 +0200] [Client 2] Read: status=200, state=6
D [27/May/2021:09:23:03 +0200] [Client 2] No authentication data provided.
D [27/May/2021:09:23:03 +0200] [Client 2] 2.0 CUPS-Get-Printers 3
D [27/May/2021:09:23:03 +0200] CUPS-Get-Printers
D [27/May/2021:09:23:03 +0200] [Client 2] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:09:23:03 +0200] [Client 2] Content-Length: 2337
D [27/May/2021:09:23:03 +0200] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:03 +0200] [Client 2] con->http=0x55db1f6f9bb0
D [27/May/2021:09:23:03 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2337, response=0x55db1f6e2d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:03 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:03 +0200] [Client 2] bytes=0, http_state=0, data_remaining=2337
D [27/May/2021:09:23:03 +0200] [Client 2] Flushing write buffer.
D [27/May/2021:09:23:03 +0200] [Client 2] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:03 +0200] [Client 2] Waiting for request.
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:03 +0200] [Client 1] POST /printers/CUPS-BRF-Printer HTTP/1.1
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:03 +0200] [Client 1] Read: status=200, state=6
D [27/May/2021:09:23:03 +0200] [Client 1] No authentication data provided.
D [27/May/2021:09:23:03 +0200] [Client 1] 2.0 Get-Printer-Attributes 4
D [27/May/2021:09:23:03 +0200] Get-Printer-Attributes ipp://localhost/printers/CUPS-BRF-Printer
D [27/May/2021:09:23:03 +0200] [Client 1] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/CUPS-BRF-Printer) from localhost.
D [27/May/2021:09:23:03 +0200] [Client 1] Content-Length: 138
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:03 +0200] [Client 1] con->http=0x55db1f6f6510
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x55db1f6d20d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:03 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:03 +0200] [Client 1] bytes=0, http_state=0, data_remaining=138
D [27/May/2021:09:23:03 +0200] [Client 1] Flushing write buffer.
D [27/May/2021:09:23:03 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:03 +0200] [Client 1] Waiting for request.
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:03 +0200] [Client 1] POST /printers/DCP-195C HTTP/1.1
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:03 +0200] [Client 1] Read: status=200, state=6
D [27/May/2021:09:23:03 +0200] [Client 1] No authentication data provided.
D [27/May/2021:09:23:03 +0200] [Client 1] 2.0 Get-Printer-Attributes 5
D [27/May/2021:09:23:03 +0200] Get-Printer-Attributes ipp://localhost/printers/DCP-195C
D [27/May/2021:09:23:03 +0200] [Client 1] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/DCP-195C) from localhost.
D [27/May/2021:09:23:03 +0200] [Client 1] Content-Length: 138
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:03 +0200] [Client 1] con->http=0x55db1f6f6510
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x55db1f6e2d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:03 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:03 +0200] [Client 1] bytes=0, http_state=0, data_remaining=138
D [27/May/2021:09:23:03 +0200] [Client 1] Flushing write buffer.
D [27/May/2021:09:23:03 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:03 +0200] [Client 1] Waiting for request.
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:03 +0200] [Client 1] POST / HTTP/1.1
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:03 +0200] [Client 1] Read: status=200, state=6
D [27/May/2021:09:23:03 +0200] [Client 1] No authentication data provided.
D [27/May/2021:09:23:03 +0200] [Client 1] 2.0 CUPS-Get-Default 6
D [27/May/2021:09:23:03 +0200] CUPS-Get-Default
D [27/May/2021:09:23:03 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [27/May/2021:09:23:03 +0200] [Client 1] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [27/May/2021:09:23:03 +0200] [Client 1] Content-Length: 124
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:03 +0200] [Client 1] con->http=0x55db1f6f6510
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x55db1f6d20d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:03 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:03 +0200] [Client 1] bytes=0, http_state=0, data_remaining=124
D [27/May/2021:09:23:03 +0200] [Client 1] Flushing write buffer.
D [27/May/2021:09:23:03 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:03 +0200] [Client 1] Waiting for request.
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:03 +0200] [Client 1] POST / HTTP/1.1
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:03 +0200] [Client 1] Read: status=200, state=6
D [27/May/2021:09:23:03 +0200] [Client 1] No authentication data provided.
D [27/May/2021:09:23:03 +0200] [Client 1] 2.0 Create-Printer-Subscriptions 7
D [27/May/2021:09:23:03 +0200] Create-Printer-Subscriptions /
D [27/May/2021:09:23:03 +0200] create_subscriptions(con=0x55db1f76a630(1), uri="/")
D [27/May/2021:09:23:03 +0200] recipient="dbus://"
D [27/May/2021:09:23:03 +0200] notify-lease-duration=86400
D [27/May/2021:09:23:03 +0200] notify-time-interval=0
D [27/May/2021:09:23:03 +0200] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [27/May/2021:09:23:03 +0200] Added subscription #100 for server.
D [27/May/2021:09:23:03 +0200] cupsdMarkDirty(----S)
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:03 +0200] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [27/May/2021:09:23:03 +0200] [Client 1] Content-Length: 107
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:03 +0200] [Client 1] con->http=0x55db1f6f6510
D [27/May/2021:09:23:03 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55db1f6e2d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:03 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:03 +0200] [Client 1] bytes=0, http_state=0, data_remaining=107
D [27/May/2021:09:23:03 +0200] [Client 1] Flushing write buffer.
D [27/May/2021:09:23:03 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:03 +0200] [Client 1] Waiting for request.
D [27/May/2021:09:23:03 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [27/May/2021:09:23:04 +0200] Expiring subscriptions...
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:05 +0200] [Client 3] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:23:05 +0200] [Client 3] Accepted from localhost (Domain)
D [27/May/2021:09:23:05 +0200] [Client 3] Waiting for request.
I [27/May/2021:09:23:05 +0200] Expiring subscriptions...
D [27/May/2021:09:23:05 +0200] [Client 3] POST / HTTP/1.1
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:05 +0200] [Client 3] Read: status=200, state=6
D [27/May/2021:09:23:05 +0200] [Client 3] No authentication data provided.
D [27/May/2021:09:23:05 +0200] [Client 3] 2.0 CUPS-Get-Default 1
D [27/May/2021:09:23:05 +0200] CUPS-Get-Default
D [27/May/2021:09:23:05 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [27/May/2021:09:23:05 +0200] [Client 3] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [27/May/2021:09:23:05 +0200] [Client 3] Content-Length: 124
D [27/May/2021:09:23:05 +0200] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:05 +0200] [Client 3] con->http=0x55db1f7006e0
D [27/May/2021:09:23:05 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x55db1f6d0150(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:05 +0200] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:05 +0200] [Client 3] bytes=0, http_state=0, data_remaining=124
D [27/May/2021:09:23:05 +0200] [Client 3] Flushing write buffer.
D [27/May/2021:09:23:05 +0200] [Client 3] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:05 +0200] [Client 3] Waiting for request.
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:05 +0200] [Client 3] POST / HTTP/1.1
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:05 +0200] [Client 3] Read: status=200, state=6
D [27/May/2021:09:23:05 +0200] [Client 3] No authentication data provided.
D [27/May/2021:09:23:05 +0200] [Client 3] 2.0 CUPS-Get-Printers 2
D [27/May/2021:09:23:05 +0200] CUPS-Get-Printers
D [27/May/2021:09:23:05 +0200] [Client 3] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:09:23:05 +0200] [Client 3] Content-Length: 2337
D [27/May/2021:09:23:05 +0200] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:05 +0200] [Client 3] con->http=0x55db1f7006e0
D [27/May/2021:09:23:05 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2337, response=0x55db1f7c2b00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:05 +0200] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:05 +0200] [Client 3] bytes=0, http_state=0, data_remaining=2337
D [27/May/2021:09:23:05 +0200] [Client 3] Flushing write buffer.
D [27/May/2021:09:23:05 +0200] [Client 3] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:05 +0200] [Client 3] Waiting for request.
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:05 +0200] [Client 4] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:23:05 +0200] [Client 4] Accepted from localhost (Domain)
D [27/May/2021:09:23:05 +0200] [Client 4] Waiting for request.
D [27/May/2021:09:23:05 +0200] [Client 4] POST / HTTP/1.1
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:05 +0200] [Client 4] Read: status=200, state=6
D [27/May/2021:09:23:05 +0200] [Client 4] No authentication data provided.
D [27/May/2021:09:23:05 +0200] [Client 4] 2.0 Create-Printer-Subscriptions 3
D [27/May/2021:09:23:05 +0200] Create-Printer-Subscriptions /
D [27/May/2021:09:23:05 +0200] create_subscriptions(con=0x55db1f79ab00(4), uri="/")
D [27/May/2021:09:23:05 +0200] recipient="dbus://"
D [27/May/2021:09:23:05 +0200] pullmethod="ippget"
D [27/May/2021:09:23:05 +0200] notify-lease-duration=3600
D [27/May/2021:09:23:05 +0200] notify-time-interval=0
D [27/May/2021:09:23:05 +0200] cupsdAddSubscription(mask=798f, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [27/May/2021:09:23:05 +0200] Added subscription #101 for server.
D [27/May/2021:09:23:05 +0200] cupsdMarkDirty(----S)
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:05 +0200] [Client 4] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [27/May/2021:09:23:05 +0200] [Client 4] Content-Length: 107
D [27/May/2021:09:23:05 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:05 +0200] [Client 4] con->http=0x55db1f703d80
D [27/May/2021:09:23:05 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55db1f6e2810(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:05 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:05 +0200] [Client 4] bytes=0, http_state=0, data_remaining=107
D [27/May/2021:09:23:05 +0200] [Client 4] Flushing write buffer.
D [27/May/2021:09:23:05 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:05 +0200] [Client 4] Waiting for request.
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:05 +0200] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:09:23:05 +0200] [Client 4] Closing connection.
D [27/May/2021:09:23:05 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/May/2021:09:23:06 +0200] Expiring subscriptions...
D [27/May/2021:09:23:10 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:10 +0200] [Client 5] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:23:10 +0200] [Client 5] Accepted from localhost (Domain)
D [27/May/2021:09:23:10 +0200] [Client 5] Waiting for request.
I [27/May/2021:09:23:10 +0200] Expiring subscriptions...
D [27/May/2021:09:23:10 +0200] [Client 5] POST / HTTP/1.1
D [27/May/2021:09:23:10 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:10 +0200] [Client 5] Read: status=200, state=6
D [27/May/2021:09:23:10 +0200] [Client 5] No authentication data provided.
D [27/May/2021:09:23:10 +0200] [Client 5] 2.0 CUPS-Get-Printers 1
D [27/May/2021:09:23:10 +0200] CUPS-Get-Printers
D [27/May/2021:09:23:10 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:09:23:10 +0200] [Client 5] Content-Length: 17774
D [27/May/2021:09:23:10 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:10 +0200] [Client 5] con->http=0x55db1f703d80
D [27/May/2021:09:23:10 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f6d2dd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:10 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:10 +0200] [Client 5] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:09:23:10 +0200] [Client 5] Flushing write buffer.
D [27/May/2021:09:23:10 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:10 +0200] [Client 5] Waiting for request.
D [27/May/2021:09:23:10 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:10 +0200] [Client 5] POST / HTTP/1.1
D [27/May/2021:09:23:10 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:10 +0200] [Client 5] Read: status=200, state=6
D [27/May/2021:09:23:10 +0200] [Client 5] No authentication data provided.
D [27/May/2021:09:23:10 +0200] [Client 5] 2.0 CUPS-Get-Classes 1
D [27/May/2021:09:23:10 +0200] CUPS-Get-Classes
D [27/May/2021:09:23:10 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:09:23:10 +0200] [Client 5] Content-Length: 75
D [27/May/2021:09:23:10 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:10 +0200] [Client 5] con->http=0x55db1f703d80
D [27/May/2021:09:23:10 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f6f62d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:10 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:10 +0200] [Client 5] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:09:23:10 +0200] [Client 5] Flushing write buffer.
D [27/May/2021:09:23:10 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:10 +0200] [Client 5] Waiting for request.
D [27/May/2021:09:23:10 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:10 +0200] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:09:23:10 +0200] [Client 5] Closing connection.
D [27/May/2021:09:23:10 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/May/2021:09:23:11 +0200] Expiring subscriptions...
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:15 +0200] [Client 6] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:23:15 +0200] [Client 6] Accepted from localhost (Domain)
D [27/May/2021:09:23:15 +0200] [Client 6] Waiting for request.
I [27/May/2021:09:23:15 +0200] Expiring subscriptions...
D [27/May/2021:09:23:15 +0200] [Client 6] POST / HTTP/1.1
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:15 +0200] [Client 6] Read: status=200, state=6
D [27/May/2021:09:23:15 +0200] [Client 6] No authentication data provided.
D [27/May/2021:09:23:15 +0200] [Client 6] 2.0 CUPS-Get-Default 1
D [27/May/2021:09:23:15 +0200] CUPS-Get-Default
D [27/May/2021:09:23:15 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [27/May/2021:09:23:15 +0200] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [27/May/2021:09:23:15 +0200] [Client 6] Content-Length: 124
D [27/May/2021:09:23:15 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:15 +0200] [Client 6] con->http=0x55db1f703d80
D [27/May/2021:09:23:15 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x55db1f7859a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:15 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:15 +0200] [Client 6] bytes=0, http_state=0, data_remaining=124
D [27/May/2021:09:23:15 +0200] [Client 6] Flushing write buffer.
D [27/May/2021:09:23:15 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:15 +0200] [Client 6] Waiting for request.
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:15 +0200] [Client 6] POST / HTTP/1.1
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:15 +0200] [Client 6] Read: status=200, state=6
D [27/May/2021:09:23:15 +0200] [Client 6] No authentication data provided.
D [27/May/2021:09:23:15 +0200] [Client 6] 2.0 CUPS-Get-Printers 2
D [27/May/2021:09:23:15 +0200] CUPS-Get-Printers
D [27/May/2021:09:23:15 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:09:23:15 +0200] [Client 6] Content-Length: 2337
D [27/May/2021:09:23:15 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:15 +0200] [Client 6] con->http=0x55db1f703d80
D [27/May/2021:09:23:15 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2337, response=0x55db1f6d0150(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:15 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:15 +0200] [Client 6] bytes=0, http_state=0, data_remaining=2337
D [27/May/2021:09:23:15 +0200] [Client 6] Flushing write buffer.
D [27/May/2021:09:23:15 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:15 +0200] [Client 6] Waiting for request.
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:15 +0200] [Client 7] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:23:15 +0200] [Client 7] Accepted from localhost (Domain)
D [27/May/2021:09:23:15 +0200] [Client 7] Waiting for request.
D [27/May/2021:09:23:15 +0200] [Client 7] POST / HTTP/1.1
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:15 +0200] [Client 7] Read: status=200, state=6
D [27/May/2021:09:23:15 +0200] [Client 7] No authentication data provided.
D [27/May/2021:09:23:15 +0200] [Client 7] 2.0 Create-Printer-Subscriptions 3
D [27/May/2021:09:23:15 +0200] Create-Printer-Subscriptions /
D [27/May/2021:09:23:15 +0200] create_subscriptions(con=0x55db1f7c4c70(7), uri="/")
D [27/May/2021:09:23:15 +0200] recipient="dbus://"
D [27/May/2021:09:23:15 +0200] pullmethod="ippget"
D [27/May/2021:09:23:15 +0200] notify-lease-duration=3600
D [27/May/2021:09:23:15 +0200] notify-time-interval=0
D [27/May/2021:09:23:15 +0200] cupsdAddSubscription(mask=798f, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [27/May/2021:09:23:15 +0200] Added subscription #102 for server.
D [27/May/2021:09:23:15 +0200] cupsdMarkDirty(----S)
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:15 +0200] [Client 7] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [27/May/2021:09:23:15 +0200] [Client 7] Content-Length: 107
D [27/May/2021:09:23:15 +0200] [Client 7] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:15 +0200] [Client 7] con->http=0x55db1f744600
D [27/May/2021:09:23:15 +0200] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55db1f6d6480(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:15 +0200] [Client 7] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:15 +0200] [Client 7] bytes=0, http_state=0, data_remaining=107
D [27/May/2021:09:23:15 +0200] [Client 7] Flushing write buffer.
D [27/May/2021:09:23:15 +0200] [Client 7] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:15 +0200] [Client 7] Waiting for request.
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:15 +0200] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:09:23:15 +0200] [Client 7] Closing connection.
D [27/May/2021:09:23:15 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/May/2021:09:23:16 +0200] Expiring subscriptions...
D [27/May/2021:09:23:17 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:17 +0200] [Client 8] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:23:17 +0200] [Client 8] Accepted from localhost (Domain)
D [27/May/2021:09:23:17 +0200] [Client 8] Waiting for request.
I [27/May/2021:09:23:17 +0200] Expiring subscriptions...
D [27/May/2021:09:23:17 +0200] [Client 8] POST / HTTP/1.1
D [27/May/2021:09:23:17 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:17 +0200] [Client 8] Read: status=200, state=6
D [27/May/2021:09:23:17 +0200] [Client 8] No authentication data provided.
D [27/May/2021:09:23:17 +0200] [Client 8] 2.0 Cancel-Subscription 4
D [27/May/2021:09:23:17 +0200] Cancel-Subscription /
D [27/May/2021:09:23:17 +0200] cupsdIsAuthorized: requesting-user-name="gdm"
D [27/May/2021:09:23:17 +0200] cupsdMarkDirty(----S)
D [27/May/2021:09:23:17 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:17 +0200] [Client 8] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
D [27/May/2021:09:23:17 +0200] [Client 8] Content-Length: 75
D [27/May/2021:09:23:17 +0200] [Client 8] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:23:17 +0200] [Client 8] con->http=0x55db1f744600
D [27/May/2021:09:23:17 +0200] [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f6d2dd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:23:17 +0200] [Client 8] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:23:17 +0200] [Client 8] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:09:23:17 +0200] [Client 8] Flushing write buffer.
D [27/May/2021:09:23:17 +0200] [Client 8] New state is HTTP_STATE_WAITING
D [27/May/2021:09:23:17 +0200] [Client 8] Waiting for request.
D [27/May/2021:09:23:17 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:17 +0200] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:09:23:17 +0200] [Client 8] Closing connection.
D [27/May/2021:09:23:17 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [27/May/2021:09:23:17 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:09:23:17 +0200] [Client 9] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:23:17 +0200] [Client 9] Accepted from localhost (Domain)
D [27/May/2021:09:23:17 +0200] [Client 9] Waiting for request.
D [27/May/2021:09:23:17 +0200] [Client 9] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:09:23:17 +0200] [Client 9] Closing connection.
D [27/May/2021:09:23:17 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:09:23:17 +0200] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:09:23:17 +0200] [Client 3] Closing connection.
D [27/May/2021:09:23:17 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/May/2021:09:23:18 +0200] Expiring subscriptions...
I [27/May/2021:09:23:32 +0200] Expiring subscriptions...
I [27/May/2021:09:23:34 +0200] Saving subscriptions.conf...
D [27/May/2021:09:23:34 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [27/May/2021:09:23:34 +0200] Expiring subscriptions...
D [27/May/2021:09:35:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:09:35:40 +0200] [Client 10] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:35:40 +0200] [Client 10] Accepted from localhost (Domain)
D [27/May/2021:09:35:40 +0200] [Client 10] Waiting for request.
I [27/May/2021:09:35:40 +0200] Expiring subscriptions...
D [27/May/2021:09:35:40 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:09:35:40 +0200] Report: clients=4
D [27/May/2021:09:35:40 +0200] Report: jobs=5
D [27/May/2021:09:35:40 +0200] Report: jobs-active=0
D [27/May/2021:09:35:40 +0200] Report: printers=2
D [27/May/2021:09:35:40 +0200] Report: stringpool-string-count=820
D [27/May/2021:09:35:40 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:09:35:40 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:09:35:40 +0200] [Client 10] POST / HTTP/1.1
D [27/May/2021:09:35:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:09:35:40 +0200] [Client 10] Read: status=200, state=6
D [27/May/2021:09:35:40 +0200] [Client 10] No authentication data provided.
D [27/May/2021:09:35:40 +0200] [Client 10] 2.0 CUPS-Get-Printers 1
D [27/May/2021:09:35:40 +0200] CUPS-Get-Printers
D [27/May/2021:09:35:40 +0200] [Client 10] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:09:35:40 +0200] [Client 10] Content-Length: 17774
D [27/May/2021:09:35:40 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:35:40 +0200] [Client 10] con->http=0x55db1f7006e0
D [27/May/2021:09:35:40 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f6d2dd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:35:40 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:35:40 +0200] [Client 10] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:09:35:40 +0200] [Client 10] Flushing write buffer.
D [27/May/2021:09:35:40 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [27/May/2021:09:35:40 +0200] [Client 10] Waiting for request.
D [27/May/2021:09:35:40 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:09:35:40 +0200] [Client 10] POST / HTTP/1.1
D [27/May/2021:09:35:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:09:35:40 +0200] [Client 10] Read: status=200, state=6
D [27/May/2021:09:35:40 +0200] [Client 10] No authentication data provided.
D [27/May/2021:09:35:40 +0200] [Client 10] 2.0 CUPS-Get-Classes 1
D [27/May/2021:09:35:40 +0200] CUPS-Get-Classes
D [27/May/2021:09:35:40 +0200] [Client 10] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:09:35:40 +0200] [Client 10] Content-Length: 75
D [27/May/2021:09:35:40 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:35:40 +0200] [Client 10] con->http=0x55db1f7006e0
D [27/May/2021:09:35:40 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f727470(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:35:40 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:35:40 +0200] [Client 10] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:09:35:40 +0200] [Client 10] Flushing write buffer.
D [27/May/2021:09:35:40 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [27/May/2021:09:35:40 +0200] [Client 10] Waiting for request.
D [27/May/2021:09:35:40 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:09:35:40 +0200] [Client 10] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:09:35:40 +0200] [Client 10] Closing connection.
D [27/May/2021:09:35:40 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:09:35:41 +0200] Expiring subscriptions...
I [27/May/2021:09:38:04 +0200] Expiring subscriptions...
D [27/May/2021:09:38:04 +0200] Closing client 1 after 900 seconds of inactivity.
D [27/May/2021:09:38:04 +0200] [Client 1] Closing connection.
D [27/May/2021:09:38:04 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [27/May/2021:09:38:04 +0200] Closing client 2 after 900 seconds of inactivity.
D [27/May/2021:09:38:04 +0200] [Client 2] Closing connection.
D [27/May/2021:09:38:04 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [27/May/2021:09:38:04 +0200] Report: clients=1
D [27/May/2021:09:38:04 +0200] Report: jobs=5
D [27/May/2021:09:38:04 +0200] Report: jobs-active=0
D [27/May/2021:09:38:04 +0200] Report: printers=2
D [27/May/2021:09:38:04 +0200] Report: stringpool-string-count=820
D [27/May/2021:09:38:04 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:09:38:04 +0200] Report: stringpool-total-bytes=16008
I [27/May/2021:09:38:16 +0200] Expiring subscriptions...
D [27/May/2021:09:38:16 +0200] Closing client 6 after 900 seconds of inactivity.
D [27/May/2021:09:38:16 +0200] [Client 6] Closing connection.
D [27/May/2021:09:38:16 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [27/May/2021:09:48:10 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:09:48:10 +0200] [Client 11] Server address is "/run/cups/cups.sock".
D [27/May/2021:09:48:10 +0200] [Client 11] Accepted from localhost (Domain)
D [27/May/2021:09:48:10 +0200] [Client 11] Waiting for request.
I [27/May/2021:09:48:10 +0200] Expiring subscriptions...
D [27/May/2021:09:48:10 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:09:48:10 +0200] Report: clients=1
D [27/May/2021:09:48:10 +0200] Report: jobs=5
D [27/May/2021:09:48:10 +0200] Report: jobs-active=0
D [27/May/2021:09:48:10 +0200] Report: printers=2
D [27/May/2021:09:48:10 +0200] Report: stringpool-string-count=820
D [27/May/2021:09:48:10 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:09:48:10 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:09:48:10 +0200] [Client 11] POST / HTTP/1.1
D [27/May/2021:09:48:10 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:09:48:10 +0200] [Client 11] Read: status=200, state=6
D [27/May/2021:09:48:10 +0200] [Client 11] No authentication data provided.
D [27/May/2021:09:48:10 +0200] [Client 11] 2.0 CUPS-Get-Printers 1
D [27/May/2021:09:48:10 +0200] CUPS-Get-Printers
D [27/May/2021:09:48:10 +0200] [Client 11] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:09:48:10 +0200] [Client 11] Content-Length: 17774
D [27/May/2021:09:48:10 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:48:10 +0200] [Client 11] con->http=0x55db1f6f6510
D [27/May/2021:09:48:10 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f6e2d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:48:10 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:48:10 +0200] [Client 11] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:09:48:10 +0200] [Client 11] Flushing write buffer.
D [27/May/2021:09:48:10 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [27/May/2021:09:48:10 +0200] [Client 11] Waiting for request.
D [27/May/2021:09:48:10 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:09:48:10 +0200] [Client 11] POST / HTTP/1.1
D [27/May/2021:09:48:10 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:09:48:10 +0200] [Client 11] Read: status=200, state=6
D [27/May/2021:09:48:10 +0200] [Client 11] No authentication data provided.
D [27/May/2021:09:48:10 +0200] [Client 11] 2.0 CUPS-Get-Classes 1
D [27/May/2021:09:48:10 +0200] CUPS-Get-Classes
D [27/May/2021:09:48:10 +0200] [Client 11] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:09:48:10 +0200] [Client 11] Content-Length: 75
D [27/May/2021:09:48:10 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:09:48:10 +0200] [Client 11] con->http=0x55db1f6f6510
D [27/May/2021:09:48:10 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f727470(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:09:48:10 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:09:48:10 +0200] [Client 11] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:09:48:10 +0200] [Client 11] Flushing write buffer.
D [27/May/2021:09:48:10 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [27/May/2021:09:48:10 +0200] [Client 11] Waiting for request.
D [27/May/2021:09:48:10 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:09:48:10 +0200] [Client 11] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:09:48:10 +0200] [Client 11] Closing connection.
D [27/May/2021:09:48:10 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:09:48:11 +0200] Expiring subscriptions...
D [27/May/2021:10:00:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:10:00:40 +0200] [Client 12] Server address is "/run/cups/cups.sock".
D [27/May/2021:10:00:40 +0200] [Client 12] Accepted from localhost (Domain)
D [27/May/2021:10:00:40 +0200] [Client 12] Waiting for request.
I [27/May/2021:10:00:40 +0200] Expiring subscriptions...
D [27/May/2021:10:00:40 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:10:00:40 +0200] Report: clients=1
D [27/May/2021:10:00:40 +0200] Report: jobs=5
D [27/May/2021:10:00:40 +0200] Report: jobs-active=0
D [27/May/2021:10:00:40 +0200] Report: printers=2
D [27/May/2021:10:00:40 +0200] Report: stringpool-string-count=820
D [27/May/2021:10:00:40 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:10:00:40 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:10:00:40 +0200] [Client 12] POST / HTTP/1.1
D [27/May/2021:10:00:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:10:00:40 +0200] [Client 12] Read: status=200, state=6
D [27/May/2021:10:00:40 +0200] [Client 12] No authentication data provided.
D [27/May/2021:10:00:40 +0200] [Client 12] 2.0 CUPS-Get-Printers 1
D [27/May/2021:10:00:40 +0200] CUPS-Get-Printers
D [27/May/2021:10:00:40 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:10:00:40 +0200] [Client 12] Content-Length: 17774
D [27/May/2021:10:00:40 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:10:00:40 +0200] [Client 12] con->http=0x55db1f6f6510
D [27/May/2021:10:00:40 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f6d2dd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:10:00:40 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:10:00:40 +0200] [Client 12] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:10:00:40 +0200] [Client 12] Flushing write buffer.
D [27/May/2021:10:00:40 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [27/May/2021:10:00:40 +0200] [Client 12] Waiting for request.
D [27/May/2021:10:00:40 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:10:00:40 +0200] [Client 12] POST / HTTP/1.1
D [27/May/2021:10:00:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:10:00:40 +0200] [Client 12] Read: status=200, state=6
D [27/May/2021:10:00:40 +0200] [Client 12] No authentication data provided.
D [27/May/2021:10:00:40 +0200] [Client 12] 2.0 CUPS-Get-Classes 1
D [27/May/2021:10:00:40 +0200] CUPS-Get-Classes
D [27/May/2021:10:00:40 +0200] [Client 12] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:10:00:40 +0200] [Client 12] Content-Length: 75
D [27/May/2021:10:00:40 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:10:00:40 +0200] [Client 12] con->http=0x55db1f6f6510
D [27/May/2021:10:00:40 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f727470(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:10:00:40 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:10:00:40 +0200] [Client 12] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:10:00:40 +0200] [Client 12] Flushing write buffer.
D [27/May/2021:10:00:40 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [27/May/2021:10:00:40 +0200] [Client 12] Waiting for request.
D [27/May/2021:10:00:40 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:10:00:40 +0200] [Client 12] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:10:00:40 +0200] [Client 12] Closing connection.
D [27/May/2021:10:00:40 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:10:00:41 +0200] Expiring subscriptions...
D [27/May/2021:11:57:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:11:57:47 +0200] [Client 13] Server address is "/run/cups/cups.sock".
D [27/May/2021:11:57:47 +0200] [Client 13] Accepted from localhost (Domain)
D [27/May/2021:11:57:47 +0200] [Client 13] Waiting for request.
I [27/May/2021:11:57:47 +0200] Expiring subscriptions...
I [27/May/2021:11:57:47 +0200] Subscription 102 has expired...
D [27/May/2021:11:57:47 +0200] cupsdMarkDirty(----S)
D [27/May/2021:11:57:47 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients"
D [27/May/2021:11:57:47 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:11:57:47 +0200] Report: clients=1
D [27/May/2021:11:57:47 +0200] Report: jobs=5
D [27/May/2021:11:57:47 +0200] Report: jobs-active=0
D [27/May/2021:11:57:47 +0200] Report: printers=2
D [27/May/2021:11:57:47 +0200] Report: stringpool-string-count=820
D [27/May/2021:11:57:47 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:11:57:47 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:11:57:47 +0200] [Client 13] POST / HTTP/1.1
D [27/May/2021:11:57:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:11:57:47 +0200] [Client 13] Read: status=200, state=6
D [27/May/2021:11:57:47 +0200] [Client 13] No authentication data provided.
D [27/May/2021:11:57:47 +0200] [Client 13] 2.0 CUPS-Get-Printers 1
D [27/May/2021:11:57:47 +0200] CUPS-Get-Printers
D [27/May/2021:11:57:47 +0200] [Client 13] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:11:57:47 +0200] [Client 13] Content-Length: 17774
D [27/May/2021:11:57:47 +0200] [Client 13] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:11:57:47 +0200] [Client 13] con->http=0x55db1f6f6510
D [27/May/2021:11:57:47 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f6e2d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:11:57:47 +0200] [Client 13] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:11:57:47 +0200] [Client 13] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:11:57:47 +0200] [Client 13] Flushing write buffer.
D [27/May/2021:11:57:47 +0200] [Client 13] New state is HTTP_STATE_WAITING
D [27/May/2021:11:57:47 +0200] [Client 13] Waiting for request.
D [27/May/2021:11:57:47 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:11:57:47 +0200] [Client 13] POST / HTTP/1.1
D [27/May/2021:11:57:47 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/May/2021:11:57:47 +0200] [Client 13] Read: status=200, state=6
D [27/May/2021:11:57:47 +0200] [Client 13] No authentication data provided.
D [27/May/2021:11:57:47 +0200] [Client 13] Read: status=100, state=6
D [27/May/2021:11:57:47 +0200] [Client 13] Read: status=100, state=6
D [27/May/2021:11:57:47 +0200] [Client 13] Read: status=100, state=6
D [27/May/2021:11:57:47 +0200] [Client 13] Read: status=100, state=6
D [27/May/2021:11:57:47 +0200] [Client 13] Read: status=100, state=6
D [27/May/2021:11:57:47 +0200] [Client 13] Read: status=100, state=6
D [27/May/2021:11:57:47 +0200] [Client 13] Read: status=100, state=6
D [27/May/2021:11:57:47 +0200] [Client 13] 2.0 CUPS-Get-Classes 1
D [27/May/2021:11:57:47 +0200] CUPS-Get-Classes
D [27/May/2021:11:57:47 +0200] [Client 13] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:11:57:47 +0200] [Client 13] Content-Length: 75
D [27/May/2021:11:57:47 +0200] [Client 13] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:11:57:47 +0200] [Client 13] con->http=0x55db1f6f6510
D [27/May/2021:11:57:47 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f74c5d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:11:57:47 +0200] [Client 13] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:11:57:47 +0200] [Client 13] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:11:57:47 +0200] [Client 13] Flushing write buffer.
D [27/May/2021:11:57:47 +0200] [Client 13] New state is HTTP_STATE_WAITING
D [27/May/2021:11:57:47 +0200] [Client 13] Waiting for request.
D [27/May/2021:11:57:47 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/May/2021:11:57:47 +0200] [Client 13] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:11:57:47 +0200] [Client 13] Closing connection.
D [27/May/2021:11:57:47 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/May/2021:11:57:48 +0200] Expiring subscriptions...
I [27/May/2021:11:58:18 +0200] Saving subscriptions.conf...
D [27/May/2021:11:58:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [27/May/2021:11:58:18 +0200] Expiring subscriptions...
D [27/May/2021:12:10:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:10:17 +0200] [Client 14] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:10:17 +0200] [Client 14] Accepted from localhost (Domain)
D [27/May/2021:12:10:17 +0200] [Client 14] Waiting for request.
I [27/May/2021:12:10:17 +0200] Expiring subscriptions...
D [27/May/2021:12:10:17 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:12:10:17 +0200] Report: clients=1
D [27/May/2021:12:10:17 +0200] Report: jobs=5
D [27/May/2021:12:10:17 +0200] Report: jobs-active=0
D [27/May/2021:12:10:17 +0200] Report: printers=2
D [27/May/2021:12:10:17 +0200] Report: stringpool-string-count=820
D [27/May/2021:12:10:17 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:12:10:17 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:12:10:17 +0200] [Client 14] POST / HTTP/1.1
D [27/May/2021:12:10:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:12:10:17 +0200] [Client 14] Read: status=200, state=6
D [27/May/2021:12:10:17 +0200] [Client 14] No authentication data provided.
D [27/May/2021:12:10:17 +0200] [Client 14] 2.0 CUPS-Get-Printers 1
D [27/May/2021:12:10:17 +0200] CUPS-Get-Printers
D [27/May/2021:12:10:17 +0200] [Client 14] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:12:10:17 +0200] [Client 14] Content-Length: 17774
D [27/May/2021:12:10:17 +0200] [Client 14] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:10:17 +0200] [Client 14] con->http=0x55db1f6f6510
D [27/May/2021:12:10:17 +0200] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f6d2dd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:10:17 +0200] [Client 14] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:10:17 +0200] [Client 14] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:12:10:17 +0200] [Client 14] Flushing write buffer.
D [27/May/2021:12:10:17 +0200] [Client 14] New state is HTTP_STATE_WAITING
D [27/May/2021:12:10:17 +0200] [Client 14] Waiting for request.
D [27/May/2021:12:10:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:10:17 +0200] [Client 14] POST / HTTP/1.1
D [27/May/2021:12:10:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:10:17 +0200] [Client 14] Read: status=200, state=6
D [27/May/2021:12:10:17 +0200] [Client 14] No authentication data provided.
D [27/May/2021:12:10:17 +0200] [Client 14] 2.0 CUPS-Get-Classes 1
D [27/May/2021:12:10:17 +0200] CUPS-Get-Classes
D [27/May/2021:12:10:17 +0200] [Client 14] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:12:10:17 +0200] [Client 14] Content-Length: 75
D [27/May/2021:12:10:17 +0200] [Client 14] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:10:17 +0200] [Client 14] con->http=0x55db1f6f6510
D [27/May/2021:12:10:17 +0200] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f6eccb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:10:17 +0200] [Client 14] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:10:17 +0200] [Client 14] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:12:10:17 +0200] [Client 14] Flushing write buffer.
D [27/May/2021:12:10:17 +0200] [Client 14] New state is HTTP_STATE_WAITING
D [27/May/2021:12:10:17 +0200] [Client 14] Waiting for request.
D [27/May/2021:12:10:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:10:17 +0200] [Client 14] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:10:17 +0200] [Client 14] Closing connection.
D [27/May/2021:12:10:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:12:10:18 +0200] Expiring subscriptions...
D [27/May/2021:12:11:57 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:11:57 +0200] [Client 15] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:11:57 +0200] [Client 15] Accepted from localhost (Domain)
D [27/May/2021:12:11:57 +0200] [Client 15] Waiting for request.
I [27/May/2021:12:11:57 +0200] Expiring subscriptions...
D [27/May/2021:12:11:57 +0200] Report: clients=1
D [27/May/2021:12:11:57 +0200] Report: jobs=5
D [27/May/2021:12:11:57 +0200] Report: jobs-active=0
D [27/May/2021:12:11:57 +0200] Report: printers=2
D [27/May/2021:12:11:57 +0200] Report: stringpool-string-count=820
D [27/May/2021:12:11:57 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:12:11:57 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:12:11:57 +0200] [Client 15] POST / HTTP/1.1
D [27/May/2021:12:11:57 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:12:11:57 +0200] [Client 15] Read: status=200, state=6
D [27/May/2021:12:11:57 +0200] [Client 15] No authentication data provided.
D [27/May/2021:12:11:57 +0200] [Client 15] 2.0 Renew-Subscription 4
D [27/May/2021:12:11:57 +0200] Renew-Subscription /
D [27/May/2021:12:11:57 +0200] Renew-Subscription client-error-not-found: Subscription #102 does not exist.
D [27/May/2021:12:11:57 +0200] [Client 15] Returning IPP client-error-not-found for Renew-Subscription (/) from localhost.
D [27/May/2021:12:11:57 +0200] [Client 15] Content-Length: 127
D [27/May/2021:12:11:57 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:11:57 +0200] [Client 15] con->http=0x55db1f6f6510
D [27/May/2021:12:11:57 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x55db1f6e2d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:11:57 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:11:57 +0200] [Client 15] bytes=0, http_state=0, data_remaining=127
D [27/May/2021:12:11:57 +0200] [Client 15] Flushing write buffer.
D [27/May/2021:12:11:57 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [27/May/2021:12:11:57 +0200] [Client 15] Waiting for request.
D [27/May/2021:12:11:57 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:11:57 +0200] [Client 15] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:11:57 +0200] [Client 15] Closing connection.
D [27/May/2021:12:11:57 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:12:11:58 +0200] Expiring subscriptions...
D [27/May/2021:12:22:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:22:47 +0200] [Client 16] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:22:47 +0200] [Client 16] Accepted from localhost (Domain)
D [27/May/2021:12:22:47 +0200] [Client 16] Waiting for request.
I [27/May/2021:12:22:47 +0200] Expiring subscriptions...
D [27/May/2021:12:22:47 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:12:22:47 +0200] Report: clients=1
D [27/May/2021:12:22:47 +0200] Report: jobs=5
D [27/May/2021:12:22:47 +0200] Report: jobs-active=0
D [27/May/2021:12:22:47 +0200] Report: printers=2
D [27/May/2021:12:22:47 +0200] Report: stringpool-string-count=820
D [27/May/2021:12:22:47 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:12:22:47 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:12:22:47 +0200] [Client 16] POST / HTTP/1.1
D [27/May/2021:12:22:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:12:22:47 +0200] [Client 16] Read: status=200, state=6
D [27/May/2021:12:22:47 +0200] [Client 16] No authentication data provided.
D [27/May/2021:12:22:47 +0200] [Client 16] 2.0 CUPS-Get-Printers 1
D [27/May/2021:12:22:47 +0200] CUPS-Get-Printers
D [27/May/2021:12:22:47 +0200] [Client 16] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:12:22:47 +0200] [Client 16] Content-Length: 17774
D [27/May/2021:12:22:47 +0200] [Client 16] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:22:47 +0200] [Client 16] con->http=0x55db1f6f6510
D [27/May/2021:12:22:47 +0200] [Client 16] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f7c2b00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:22:47 +0200] [Client 16] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:22:47 +0200] [Client 16] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:12:22:47 +0200] [Client 16] Flushing write buffer.
D [27/May/2021:12:22:47 +0200] [Client 16] New state is HTTP_STATE_WAITING
D [27/May/2021:12:22:47 +0200] [Client 16] Waiting for request.
D [27/May/2021:12:22:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:22:47 +0200] [Client 16] POST / HTTP/1.1
D [27/May/2021:12:22:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:22:47 +0200] [Client 16] Read: status=200, state=6
D [27/May/2021:12:22:47 +0200] [Client 16] No authentication data provided.
D [27/May/2021:12:22:47 +0200] [Client 16] 2.0 CUPS-Get-Classes 1
D [27/May/2021:12:22:47 +0200] CUPS-Get-Classes
D [27/May/2021:12:22:47 +0200] [Client 16] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:12:22:47 +0200] [Client 16] Content-Length: 75
D [27/May/2021:12:22:47 +0200] [Client 16] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:22:47 +0200] [Client 16] con->http=0x55db1f6f6510
D [27/May/2021:12:22:47 +0200] [Client 16] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f7424a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:22:47 +0200] [Client 16] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:22:47 +0200] [Client 16] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:12:22:47 +0200] [Client 16] Flushing write buffer.
D [27/May/2021:12:22:47 +0200] [Client 16] New state is HTTP_STATE_WAITING
D [27/May/2021:12:22:47 +0200] [Client 16] Waiting for request.
D [27/May/2021:12:22:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:22:47 +0200] [Client 16] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:22:47 +0200] [Client 16] Closing connection.
D [27/May/2021:12:22:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:12:22:48 +0200] Expiring subscriptions...
D [27/May/2021:12:35:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:35:17 +0200] [Client 17] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:35:17 +0200] [Client 17] Accepted from localhost (Domain)
D [27/May/2021:12:35:17 +0200] [Client 17] Waiting for request.
I [27/May/2021:12:35:17 +0200] Expiring subscriptions...
D [27/May/2021:12:35:17 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:12:35:17 +0200] Report: clients=1
D [27/May/2021:12:35:17 +0200] Report: jobs=5
D [27/May/2021:12:35:17 +0200] Report: jobs-active=0
D [27/May/2021:12:35:17 +0200] Report: printers=2
D [27/May/2021:12:35:17 +0200] Report: stringpool-string-count=820
D [27/May/2021:12:35:17 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:12:35:17 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:12:35:17 +0200] [Client 17] POST / HTTP/1.1
D [27/May/2021:12:35:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:12:35:17 +0200] [Client 17] Read: status=200, state=6
D [27/May/2021:12:35:17 +0200] [Client 17] No authentication data provided.
D [27/May/2021:12:35:17 +0200] [Client 17] 2.0 CUPS-Get-Printers 1
D [27/May/2021:12:35:17 +0200] CUPS-Get-Printers
D [27/May/2021:12:35:17 +0200] [Client 17] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:12:35:17 +0200] [Client 17] Content-Length: 17774
D [27/May/2021:12:35:17 +0200] [Client 17] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:35:17 +0200] [Client 17] con->http=0x55db1f6f6510
D [27/May/2021:12:35:17 +0200] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f6d0150(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:35:17 +0200] [Client 17] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:35:17 +0200] [Client 17] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:12:35:17 +0200] [Client 17] Flushing write buffer.
D [27/May/2021:12:35:17 +0200] [Client 17] New state is HTTP_STATE_WAITING
D [27/May/2021:12:35:17 +0200] [Client 17] Waiting for request.
D [27/May/2021:12:35:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:35:17 +0200] [Client 17] POST / HTTP/1.1
D [27/May/2021:12:35:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:35:17 +0200] [Client 17] Read: status=200, state=6
D [27/May/2021:12:35:17 +0200] [Client 17] No authentication data provided.
D [27/May/2021:12:35:17 +0200] [Client 17] 2.0 CUPS-Get-Classes 1
D [27/May/2021:12:35:17 +0200] CUPS-Get-Classes
D [27/May/2021:12:35:17 +0200] [Client 17] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:12:35:17 +0200] [Client 17] Content-Length: 75
D [27/May/2021:12:35:17 +0200] [Client 17] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:35:17 +0200] [Client 17] con->http=0x55db1f6f6510
D [27/May/2021:12:35:17 +0200] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f7424a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:35:17 +0200] [Client 17] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:35:17 +0200] [Client 17] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:12:35:17 +0200] [Client 17] Flushing write buffer.
D [27/May/2021:12:35:17 +0200] [Client 17] New state is HTTP_STATE_WAITING
D [27/May/2021:12:35:17 +0200] [Client 17] Waiting for request.
D [27/May/2021:12:35:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:35:17 +0200] [Client 17] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:35:17 +0200] [Client 17] Closing connection.
D [27/May/2021:12:35:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:12:35:18 +0200] Expiring subscriptions...
D [27/May/2021:12:47:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:47:47 +0200] [Client 18] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:47:47 +0200] [Client 18] Accepted from localhost (Domain)
D [27/May/2021:12:47:47 +0200] [Client 18] Waiting for request.
I [27/May/2021:12:47:47 +0200] Expiring subscriptions...
D [27/May/2021:12:47:47 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:12:47:47 +0200] Report: clients=1
D [27/May/2021:12:47:47 +0200] Report: jobs=5
D [27/May/2021:12:47:47 +0200] Report: jobs-active=0
D [27/May/2021:12:47:47 +0200] Report: printers=2
D [27/May/2021:12:47:47 +0200] Report: stringpool-string-count=820
D [27/May/2021:12:47:47 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:12:47:47 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:12:47:47 +0200] [Client 18] POST / HTTP/1.1
D [27/May/2021:12:47:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:12:47:47 +0200] [Client 18] Read: status=200, state=6
D [27/May/2021:12:47:47 +0200] [Client 18] No authentication data provided.
D [27/May/2021:12:47:47 +0200] [Client 18] 2.0 CUPS-Get-Printers 1
D [27/May/2021:12:47:47 +0200] CUPS-Get-Printers
D [27/May/2021:12:47:47 +0200] [Client 18] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:12:47:47 +0200] [Client 18] Content-Length: 17774
D [27/May/2021:12:47:47 +0200] [Client 18] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:47:47 +0200] [Client 18] con->http=0x55db1f6f6510
D [27/May/2021:12:47:47 +0200] [Client 18] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f7c2b00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:47:47 +0200] [Client 18] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:47:47 +0200] [Client 18] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:12:47:47 +0200] [Client 18] Flushing write buffer.
D [27/May/2021:12:47:47 +0200] [Client 18] New state is HTTP_STATE_WAITING
D [27/May/2021:12:47:47 +0200] [Client 18] Waiting for request.
D [27/May/2021:12:47:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:47:47 +0200] [Client 18] POST / HTTP/1.1
D [27/May/2021:12:47:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:47:47 +0200] [Client 18] Read: status=200, state=6
D [27/May/2021:12:47:47 +0200] [Client 18] No authentication data provided.
D [27/May/2021:12:47:47 +0200] [Client 18] 2.0 CUPS-Get-Classes 1
D [27/May/2021:12:47:47 +0200] CUPS-Get-Classes
D [27/May/2021:12:47:47 +0200] [Client 18] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:12:47:47 +0200] [Client 18] Content-Length: 75
D [27/May/2021:12:47:47 +0200] [Client 18] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:47:47 +0200] [Client 18] con->http=0x55db1f6f6510
D [27/May/2021:12:47:47 +0200] [Client 18] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f7424a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:47:47 +0200] [Client 18] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:47:47 +0200] [Client 18] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:12:47:47 +0200] [Client 18] Flushing write buffer.
D [27/May/2021:12:47:47 +0200] [Client 18] New state is HTTP_STATE_WAITING
D [27/May/2021:12:47:47 +0200] [Client 18] Waiting for request.
D [27/May/2021:12:47:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:47:47 +0200] [Client 18] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:47:47 +0200] [Client 18] Closing connection.
D [27/May/2021:12:47:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:12:47:48 +0200] Expiring subscriptions...
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:58:00 +0200] [Client 19] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:58:00 +0200] [Client 19] Accepted from localhost (Domain)
D [27/May/2021:12:58:00 +0200] [Client 19] Waiting for request.
I [27/May/2021:12:58:00 +0200] Expiring subscriptions...
D [27/May/2021:12:58:00 +0200] cupsdAddCert: Adding certificate for PID 0
D [27/May/2021:12:58:00 +0200] Report: clients=1
D [27/May/2021:12:58:00 +0200] Report: jobs=5
D [27/May/2021:12:58:00 +0200] Report: jobs-active=0
D [27/May/2021:12:58:00 +0200] Report: printers=2
D [27/May/2021:12:58:00 +0200] Report: stringpool-string-count=820
D [27/May/2021:12:58:00 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:12:58:00 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:12:58:00 +0200] [Client 19] POST / HTTP/1.1
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:12:58:00 +0200] [Client 19] Read: status=200, state=6
D [27/May/2021:12:58:00 +0200] [Client 19] No authentication data provided.
D [27/May/2021:12:58:00 +0200] [Client 19] 2.0 CUPS-Get-Default 1
D [27/May/2021:12:58:00 +0200] CUPS-Get-Default
D [27/May/2021:12:58:00 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [27/May/2021:12:58:00 +0200] [Client 19] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [27/May/2021:12:58:00 +0200] [Client 19] Content-Length: 124
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:58:00 +0200] [Client 19] con->http=0x55db1f6f6510
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x55db1f6d0150(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:58:00 +0200] [Client 19] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:58:00 +0200] [Client 19] bytes=0, http_state=0, data_remaining=124
D [27/May/2021:12:58:00 +0200] [Client 19] Flushing write buffer.
D [27/May/2021:12:58:00 +0200] [Client 19] New state is HTTP_STATE_WAITING
D [27/May/2021:12:58:00 +0200] [Client 19] Waiting for request.
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:58:00 +0200] [Client 19] POST / HTTP/1.1
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:58:00 +0200] [Client 19] Read: status=200, state=6
D [27/May/2021:12:58:00 +0200] [Client 19] No authentication data provided.
D [27/May/2021:12:58:00 +0200] [Client 19] 2.0 CUPS-Get-Printers 2
D [27/May/2021:12:58:00 +0200] CUPS-Get-Printers
D [27/May/2021:12:58:00 +0200] [Client 19] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:12:58:00 +0200] [Client 19] Content-Length: 2337
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:58:00 +0200] [Client 19] con->http=0x55db1f6f6510
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2337, response=0x55db1f7859a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:58:00 +0200] [Client 19] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:58:00 +0200] [Client 19] bytes=0, http_state=0, data_remaining=2337
D [27/May/2021:12:58:00 +0200] [Client 19] Flushing write buffer.
D [27/May/2021:12:58:00 +0200] [Client 19] New state is HTTP_STATE_WAITING
D [27/May/2021:12:58:00 +0200] [Client 19] Waiting for request.
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:58:00 +0200] [Client 20] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:58:00 +0200] [Client 20] Accepted from localhost (Domain)
D [27/May/2021:12:58:00 +0200] [Client 20] Waiting for request.
D [27/May/2021:12:58:00 +0200] [Client 20] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:58:00 +0200] [Client 20] Closing connection.
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:58:00 +0200] [Client 19] POST / HTTP/1.1
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:58:00 +0200] [Client 19] Read: status=200, state=6
D [27/May/2021:12:58:00 +0200] [Client 19] No authentication data provided.
D [27/May/2021:12:58:00 +0200] [Client 19] 2.0 CUPS-Get-Classes 3
D [27/May/2021:12:58:00 +0200] CUPS-Get-Classes
D [27/May/2021:12:58:00 +0200] [Client 19] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:12:58:00 +0200] [Client 19] Content-Length: 75
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:58:00 +0200] [Client 19] con->http=0x55db1f6f6510
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f6d2dd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:58:00 +0200] [Client 19] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:58:00 +0200] [Client 19] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:12:58:00 +0200] [Client 19] Flushing write buffer.
D [27/May/2021:12:58:00 +0200] [Client 19] New state is HTTP_STATE_WAITING
D [27/May/2021:12:58:00 +0200] [Client 19] Waiting for request.
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:58:00 +0200] [Client 19] POST / HTTP/1.1
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:58:00 +0200] [Client 19] Read: status=200, state=6
D [27/May/2021:12:58:00 +0200] [Client 19] No authentication data provided.
D [27/May/2021:12:58:00 +0200] [Client 19] 2.0 CUPS-Get-Printers 4
D [27/May/2021:12:58:00 +0200] CUPS-Get-Printers
D [27/May/2021:12:58:00 +0200] [Client 19] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:12:58:00 +0200] [Client 19] Content-Length: 343
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:58:00 +0200] [Client 19] con->http=0x55db1f6f6510
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=343, response=0x55db1f6e2d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:58:00 +0200] [Client 19] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:58:00 +0200] [Client 19] bytes=0, http_state=0, data_remaining=343
D [27/May/2021:12:58:00 +0200] [Client 19] Flushing write buffer.
D [27/May/2021:12:58:00 +0200] [Client 19] New state is HTTP_STATE_WAITING
D [27/May/2021:12:58:00 +0200] [Client 19] Waiting for request.
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:58:00 +0200] [Client 19] POST / HTTP/1.1
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:58:00 +0200] [Client 19] Read: status=200, state=6
D [27/May/2021:12:58:00 +0200] [Client 19] No authentication data provided.
D [27/May/2021:12:58:00 +0200] [Client 19] 2.0 CUPS-Get-Printers 5
D [27/May/2021:12:58:00 +0200] CUPS-Get-Printers
D [27/May/2021:12:58:00 +0200] [Client 19] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:12:58:00 +0200] [Client 19] Content-Length: 317
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:58:00 +0200] [Client 19] con->http=0x55db1f6f6510
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=317, response=0x55db1f6d0150(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:58:00 +0200] [Client 19] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:58:00 +0200] [Client 19] bytes=0, http_state=0, data_remaining=317
D [27/May/2021:12:58:00 +0200] [Client 19] Flushing write buffer.
D [27/May/2021:12:58:00 +0200] [Client 19] New state is HTTP_STATE_WAITING
D [27/May/2021:12:58:00 +0200] [Client 19] Waiting for request.
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:58:00 +0200] [Client 19] POST / HTTP/1.1
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:58:00 +0200] [Client 19] Read: status=200, state=6
D [27/May/2021:12:58:00 +0200] [Client 19] No authentication data provided.
D [27/May/2021:12:58:00 +0200] [Client 19] 2.0 CUPS-Get-Printers 6
D [27/May/2021:12:58:00 +0200] CUPS-Get-Printers
D [27/May/2021:12:58:00 +0200] [Client 19] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:12:58:00 +0200] [Client 19] Content-Length: 744
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:58:00 +0200] [Client 19] con->http=0x55db1f6f6510
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=744, response=0x55db1f6e2d10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:58:00 +0200] [Client 19] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:58:00 +0200] [Client 19] bytes=0, http_state=0, data_remaining=744
D [27/May/2021:12:58:00 +0200] [Client 19] Flushing write buffer.
D [27/May/2021:12:58:00 +0200] [Client 19] New state is HTTP_STATE_WAITING
D [27/May/2021:12:58:00 +0200] [Client 19] Waiting for request.
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:58:00 +0200] [Client 19] POST / HTTP/1.1
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:58:00 +0200] [Client 19] Read: status=200, state=6
D [27/May/2021:12:58:00 +0200] [Client 19] No authentication data provided.
D [27/May/2021:12:58:00 +0200] [Client 19] 2.0 Get-Jobs 7
D [27/May/2021:12:58:00 +0200] Get-Jobs ipp://localhost/
D [27/May/2021:12:58:00 +0200] [Client 19] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost.
D [27/May/2021:12:58:00 +0200] [Client 19] Content-Length: 75
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:12:58:00 +0200] [Client 19] con->http=0x55db1f6f6510
D [27/May/2021:12:58:00 +0200] [Client 19] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f6d0150(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:12:58:00 +0200] [Client 19] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:12:58:00 +0200] [Client 19] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:12:58:00 +0200] [Client 19] Flushing write buffer.
D [27/May/2021:12:58:00 +0200] [Client 19] New state is HTTP_STATE_WAITING
D [27/May/2021:12:58:00 +0200] [Client 19] Waiting for request.
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:58:00 +0200] [Client 19] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:58:00 +0200] [Client 19] Closing connection.
D [27/May/2021:12:58:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:12:58:01 +0200] Expiring subscriptions...
D [27/May/2021:12:59:53 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:59:53 +0200] [Client 21] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:59:53 +0200] [Client 21] Accepted from localhost (Domain)
D [27/May/2021:12:59:53 +0200] [Client 21] Waiting for request.
I [27/May/2021:12:59:53 +0200] Expiring subscriptions...
D [27/May/2021:12:59:53 +0200] Report: clients=1
D [27/May/2021:12:59:53 +0200] Report: jobs=5
D [27/May/2021:12:59:53 +0200] Report: jobs-active=0
D [27/May/2021:12:59:53 +0200] Report: printers=2
D [27/May/2021:12:59:53 +0200] Report: stringpool-string-count=820
D [27/May/2021:12:59:53 +0200] Report: stringpool-alloc-bytes=9024
D [27/May/2021:12:59:53 +0200] Report: stringpool-total-bytes=16008
D [27/May/2021:12:59:53 +0200] [Client 21] POST / HTTP/1.1
D [27/May/2021:12:59:53 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:12:59:53 +0200] [Client 21] Read: status=200, state=6
D [27/May/2021:12:59:53 +0200] [Client 21] No authentication data provided.
D [27/May/2021:12:59:53 +0200] [Client 21] 2.0 CUPS-Get-Devices 1
D [27/May/2021:12:59:53 +0200] CUPS-Get-Devices
D [27/May/2021:12:59:53 +0200] cupsdIsAuthorized: username=""
D [27/May/2021:12:59:53 +0200] [Client 21] Returning HTTP Non autorisé for CUPS-Get-Devices (no URI) from localhost
D [27/May/2021:12:59:53 +0200] [Client 21] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [27/May/2021:12:59:53 +0200] [Client 21] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [27/May/2021:12:59:53 +0200] [Client 21] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:59:53 +0200] [Client 21] Closing connection.
D [27/May/2021:12:59:53 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:59:53 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:59:53 +0200] [Client 22] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:59:53 +0200] [Client 22] Accepted from localhost (Domain)
D [27/May/2021:12:59:53 +0200] [Client 22] Waiting for request.
D [27/May/2021:12:59:53 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:12:59:53 +0200] [Client 23] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:59:53 +0200] [Client 23] Accepted from localhost (Domain)
D [27/May/2021:12:59:53 +0200] [Client 23] Waiting for request.
D [27/May/2021:12:59:53 +0200] [Client 22] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:59:53 +0200] [Client 22] Closing connection.
D [27/May/2021:12:59:53 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:59:53 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:59:53 +0200] [Client 24] Server address is "/run/cups/cups.sock".
D [27/May/2021:12:59:53 +0200] [Client 24] Accepted from localhost (Domain)
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for request.
D [27/May/2021:12:59:53 +0200] [Client 23] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:59:53 +0200] [Client 23] Closing connection.
D [27/May/2021:12:59:53 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:59:53 +0200] [Client 24] POST / HTTP/1.1
D [27/May/2021:12:59:53 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:12:59:53 +0200] [Client 24] Read: status=200, state=6
D [27/May/2021:12:59:53 +0200] [Client 24] Authorized as laurent using PeerCred.
D [27/May/2021:12:59:53 +0200] [Client 24] 2.0 CUPS-Get-Devices 1
D [27/May/2021:12:59:53 +0200] CUPS-Get-Devices
D [27/May/2021:12:59:53 +0200] cupsdIsAuthorized: username="laurent"
D [27/May/2021:12:59:53 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [27/May/2021:12:59:53 +0200] [CGI] argv[1] = "1"
D [27/May/2021:12:59:53 +0200] [CGI] argv[2] = "0"
D [27/May/2021:12:59:53 +0200] [CGI] argv[3] = "15"
D [27/May/2021:12:59:53 +0200] [CGI] argv[4] = "7"
D [27/May/2021:12:59:53 +0200] [CGI] argv[5] = "requested-attributes=all"
D [27/May/2021:12:59:53 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [27/May/2021:12:59:53 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [27/May/2021:12:59:53 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [27/May/2021:12:59:53 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [27/May/2021:12:59:53 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [27/May/2021:12:59:53 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [27/May/2021:12:59:53 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [27/May/2021:12:59:53 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D [27/May/2021:12:59:53 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [27/May/2021:12:59:53 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [27/May/2021:12:59:53 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@laurent-Inspiron-3505"
D [27/May/2021:12:59:53 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/2.3.1"
D [27/May/2021:12:59:53 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [27/May/2021:12:59:53 +0200] [CGI] envp[13] = "USER=root"
D [27/May/2021:12:59:53 +0200] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [27/May/2021:12:59:53 +0200] [CGI] envp[15] = "CUPS_SERVER=/run/cups/cups.sock"
D [27/May/2021:12:59:53 +0200] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [27/May/2021:12:59:53 +0200] [CGI] envp[17] = "IPP_PORT=631"
D [27/May/2021:12:59:53 +0200] [CGI] envp[18] = "AUTH_TYPE=PeerCred"
D [27/May/2021:12:59:53 +0200] [CGI] envp[19] = "LANG=fr_FR.UTF8"
D [27/May/2021:12:59:53 +0200] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [27/May/2021:12:59:53 +0200] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [27/May/2021:12:59:53 +0200] [CGI] envp[22] = "SERVER_NAME=localhost"
D [27/May/2021:12:59:53 +0200] [CGI] envp[23] = "SERVER_PORT=631"
D [27/May/2021:12:59:53 +0200] [CGI] envp[24] = "REMOTE_ADDR=localhost"
D [27/May/2021:12:59:53 +0200] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [27/May/2021:12:59:53 +0200] [CGI] envp[26] = "SCRIPT_NAME=/"
D [27/May/2021:12:59:53 +0200] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D [27/May/2021:12:59:53 +0200] [CGI] envp[28] = "REMOTE_USER=laurent"
D [27/May/2021:12:59:53 +0200] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1"
D [27/May/2021:12:59:53 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=CUPS/2.3.1 (Linux 5.4.0-73-generic; x86_64) IPP/2.0"
D [27/May/2021:12:59:53 +0200] [CGI] envp[31] = "REQUEST_METHOD=POST"
D [27/May/2021:12:59:53 +0200] [CGI] envp[32] = "CONTENT_LENGTH=75"
D [27/May/2021:12:59:53 +0200] [CGI] envp[33] = "CONTENT_TYPE=application/ipp"
D [27/May/2021:12:59:53 +0200] cupsdAddCert: Adding certificate for PID 4956
D [27/May/2021:12:59:53 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 4956)
I [27/May/2021:12:59:53 +0200] [Client 24] Started "/usr/lib/cups/daemon/cups-deviced" (pid=4956, file=13)
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 4963)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 4964)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/gutenprint53+usb (PID 4965)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 4966)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-brf (PID 4967)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 4968)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hpfax (PID 4969)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 4970)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 4971)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 4972)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 4973)
D [27/May/2021:12:59:53 +0200] [CGI] Multi-Call Dye-sublimation CUPS Backend version 0.94G
D [27/May/2021:12:59:53 +0200] [CGI] Copyright 2007-2019 Solomon Peachy
D [27/May/2021:12:59:53 +0200] [CGI] This free software comes with ABSOLUTELY NO WARRANTY! 
D [27/May/2021:12:59:53 +0200] [CGI] Licensed under the GNU GPL.  Run with \'-G\' for more details.
D [27/May/2021:12:59:53 +0200] [CGI] 
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 4974)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 4975)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 4976)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 4977)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 4979)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hp (PID 4980)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 4981)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/https (PID 4982)
D [27/May/2021:12:59:53 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 4983)
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"cups-brf:/\"...
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4967 (cups-brf) exited with no errors.
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] Script header: Content-Type: application/ipp
D [27/May/2021:12:59:53 +0200] [Client 24] Script header: 
D [27/May/2021:12:59:53 +0200] [Client 24] Sending status 200 for CGI.
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [27/May/2021:12:59:53 +0200] [CGI] Loaded 181 quirks.
D [27/May/2021:12:59:53 +0200] [CGI] list_devices
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"ipps\"...
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4968 (ipps) exited with no errors.
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"lpd\"...
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [CGI] libusb_get_device_list=8
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4970 (serial) exited with no errors.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4977 (lpd) exited with no errors.
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"beh\"...
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4975 (beh) exited with no errors.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"http\"...
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4971 (bluetooth) exited with no errors.
D [27/May/2021:12:59:53 +0200] [CGI] Started ippfind (PID 4986)
D [27/May/2021:12:59:53 +0200] [CGI] Environment variables:
D [27/May/2021:12:59:53 +0200] [CGI] DYESUB_DEBUG EXTRA_PID EXTRA_VID EXTRA_TYPE BACKEND SERIAL OLD_URI_SCHEME BACKEND_QUIET
D [27/May/2021:12:59:53 +0200] [CGI] CUPS Usage:
D [27/May/2021:12:59:53 +0200] [CGI] DEVICE_URI=someuri gutenprint53+usb job user title num-copies options [ filename ]
D [27/May/2021:12:59:53 +0200] [CGI] 
D [27/May/2021:12:59:53 +0200] [CGI] Standalone Usage:
D [27/May/2021:12:59:53 +0200] [CGI] gutenprint53+usb
D [27/May/2021:12:59:53 +0200] [ -D ] [ -G ] [ -f ] [ -v ]
D [27/May/2021:12:59:53 +0200] [ backend_specific_args ] 
D [27/May/2021:12:59:53 +0200] [ -d copies ] 
D [27/May/2021:12:59:53 +0200] [ - | infile ] 
D [27/May/2021:12:59:53 +0200] [CGI] # Canon SELPHY CP/ES (legacy) version 0.104
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=canonselphy canon-cp10 canon-cp100 canon-cp200 canon-cp220 canon-cp300 canon-cp330 canon-cp400 canon-cp500 canon-cp510 canon-cp520 canon-cp530 canon-cp600 canon-cp710 canon-cp720 canon-cp730 canon-cp740 canon-cp750 canon-cp760 canon-cp770 canon-cp780 canon-cp790 canon-cp800 canon-cp810 canon-cp900 canon-es1 canon-es2 canon-es20 canon-es3 canon-es30 canon-es40 selphycp10 selphycp100 selphycp200 selphycp220 selphycp300 selphycp330 selphycp400 selphycp500 selphycp510 selphycp520 selphycp530 selphycp600 selphycp710 selphycp720 selphycp730 selphycp740 selphycp750 selphycp760 selphycp770 selphycp780 selphycp790 selphycp800 selphycp810 selphycp900 DEBUG: Started post-processing (PID 4987)
D [27/May/2021:12:59:53 +0200] [CGI] selphyes1 selphyes2 selphyes20 selphyes3 selphyes30 selphyes40 
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query printer status
D [27/May/2021:12:59:53 +0200] [CGI] # Canon SELPHY CP (new) version 0.20
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=canonselphyneo canon-cp820 canon-cp910 canon-cp1000 canon-cp1200 canon-cp1300 selphycp820 selphycp910 selphycp1000 selphycp1200 selphycp1300 
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query printer status
D [27/May/2021:12:59:53 +0200] [CGI] # Kodak 6800/6850 version 0.73 (lib 0.08)
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=kodak68x0 kodak-6800 kodak-6850 kodak6800 kodak6850 
D [27/May/2021:12:59:53 +0200] [ -c filename ]  # Get tone curve
D [27/May/2021:12:59:53 +0200] [ -C filename ]  # Set tone curve
D [27/May/2021:12:59:53 +0200] [ -m ]           # Query media
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer
D [27/May/2021:12:59:53 +0200] [ -X jobid ]     # Cancel Job
D [27/May/2021:12:59:53 +0200] [CGI] # Kodak 605/70xx version 0.45 (lib 0.08)
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=kodak605 kodak-605 kodak-7000 kodak-7010 kodak-7015 
D [27/May/2021:12:59:53 +0200] [ -c filename ]  # Get user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -C filename ]  # Set tone curve
D [27/May/2021:12:59:53 +0200] [ -e ]           # Query error log
D [27/May/2021:12:59:53 +0200] [ -F ]           # Flash Printer LED
D [27/May/2021:12:59:53 +0200] [ -i ]           # Query printer info
D [27/May/2021:12:59:53 +0200] [ -l filename ]  # Get current tone curve
D [27/May/2021:12:59:53 +0200] [ -L filename ]  # Set current tone curve
D [27/May/2021:12:59:53 +0200] [ -m ]           # Query media
D [27/May/2021:12:59:53 +0200] [ -r ]           # Reset user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer to factory defaults
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [ -X jobid ]     # Cancel job
D [27/May/2021:12:59:53 +0200] [CGI] # Kodak 1400/805 version 0.40
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=kodak1400 kodak-1400 kodak-805 mitsubishi-3020d mitsubishi-3020da kodak805 mitsu3020d mitsu3020da mitsubishi-3020dae mitsubishi-3020de mitsubishi-3020du 
D [27/May/2021:12:59:53 +0200] [ -C filename ]  # Set tone curve
D [27/May/2021:12:59:53 +0200] [CGI] # Shinko/Sinfonia CHC-S1245/E1 version 0.31 (lib 0.08)
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=shinko-chcs1245 sinfonia-chcs1245 shinkos1245 
D [27/May/2021:12:59:53 +0200] [ -m ]           # Query media
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [ -u ]           # Query user string
D [27/May/2021:12:59:53 +0200] [ -U sometext ]  # Set user string
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer
D [27/May/2021:12:59:53 +0200] [ -X jobid ]     # Abort a printjob
D [27/May/2021:12:59:53 +0200] [ -F ]           # Tone curve refers to FINE mode
D [27/May/2021:12:59:53 +0200] [ -c filename ]  # Get user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -C filename ]  # Set user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -l filename ]  # Get current tone curve
D [27/May/2021:12:59:53 +0200] [ -L filename ]  # Set current tone curve
D [27/May/2021:12:59:53 +0200] [CGI] # Shinko/Sinfonia CHC-S2145/S2 version 0.61 (lib 0.08)
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=shinko-chcs2145 sinfonia-chcs2145 shinkos2145 
D [27/May/2021:12:59:53 +0200] [ -b 0|1 ]       # Disable/Enable control panel
D [27/May/2021:12:59:53 +0200] [ -c filename ]  # Get user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -C filename ]  # Set user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -e ]           # Query error log
D [27/May/2021:12:59:53 +0200] [ -F ]           # Flash Printer LED
D [27/May/2021:12:59:53 +0200] [ -i ]           # Query printer info
D [27/May/2021:12:59:53 +0200] [ -l filename ]  # Get current tone curve
D [27/May/2021:12:59:53 +0200] [ -L filename ]  # Set current tone curve
D [27/May/2021:12:59:53 +0200] [ -m ]           # Query media
D [27/May/2021:12:59:53 +0200] [ -r ]           # Reset user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer to factory defaults
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [ -u ]           # Query user string
D [27/May/2021:12:59:53 +0200] [ -U sometext ]  # Set user string
D [27/May/2021:12:59:53 +0200] [ -X jobid ]     # Abort a printjob
D [27/May/2021:12:59:53 +0200] [CGI] # Shinko/Sinfonia CHC-S6145/CS2/S2245/S3 version 0.40 (lib 0.08)
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=sinfonia-chcs6145 ciaat-brava-21 sinfonia-chcs2245 hiti-m610 shinko-chcs6145 shinkos6145 brava21 
D [27/May/2021:12:59:53 +0200] [ -c filename ]  # Get user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -C filename ]  # Set user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -e ]           # Query error log
D [27/May/2021:12:59:53 +0200] [ -F ]           # Flash Printer LED
D [27/May/2021:12:59:53 +0200] [ -i ]           # Query printer info
D [27/May/2021:12:59:53 +0200] [ -k num ]       # Set sleep time (5-240 minutes)
D [27/May/2021:12:59:53 +0200] [ -l filename ]  # Get current tone curve
D [27/May/2021:12:59:53 +0200] [ -L filename ]  # Set current tone curve
D [27/May/2021:12:59:53 +0200] [ -m ]           # Query media
D [27/May/2021:12:59:53 +0200] [ -q filename ]  # Extract eeprom data
D [27/May/2021:12:59:53 +0200] [ -Q filename ]  # Extract image correction params
D [27/May/2021:12:59:53 +0200] [ -r ]           # Reset user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer to factory defaults
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [ -X jobid ]     # Abort a printjob
D [27/May/2021:12:59:53 +0200] [CGI] # Sinfonia CHC-S6245 / Kodak 8810 version 0.22 (lib 0.08)
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=sinfonia-chcs6245 hiti-p910l kodak-8810 shinko-chcs6245 shinkos6245 hitip910 
D [27/May/2021:12:59:53 +0200] [ -c filename ]  # Get user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -C filename ]  # Set user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -e ]           # Query error log
D [27/May/2021:12:59:53 +0200] [ -F ]           # Flash Printer LED
D [27/May/2021:12:59:53 +0200] [ -i ]           # Query printer info
D [27/May/2021:12:59:53 +0200] [ -k num ]       # Set sleep time (5-240 minutes)
D [27/May/2021:12:59:53 +0200] [ -l filename ]  # Get current tone curve
D [27/May/2021:12:59:53 +0200] [ -L filename ]  # Set current tone curve
D [27/May/2021:12:59:53 +0200] [ -m ]           # Query media
D [27/May/2021:12:59:53 +0200] [ -r ]           # Reset user/NV tone curve
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer to factory defaults
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [ -X jobid ]     # Abort a printjob
D [27/May/2021:12:59:53 +0200] [CGI] # Sony UP-D version 0.37
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=sonyupd sony-updr150 sony-updr200 sony-upcr10l sony-upd895 sony-upd897 dnp-sl10 sonyupdr150 sonyupdr200 sonyupcr10 
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query printer status
D [27/May/2021:12:59:53 +0200] [CGI] # Mitsubishi CP-D70 family version 0.95
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=mitsu70x mitsubishi-d70dw mitsubishi-d80dw mitsubishi-k60dw kodak-305 fujifilm-ask-300 mitsubishi-d707dw mitsubishi-k60dws mitsud80 mitsuk60 kodak305 fujiask300 
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query printer status
D [27/May/2021:12:59:53 +0200] [ -j ]           # Query job status
D [27/May/2021:12:59:53 +0200] [ -w ]           # Wake up printer
D [27/May/2021:12:59:53 +0200] [ -W ]           # Wake up printer and wait
D [27/May/2021:12:59:53 +0200] [ -k num ]       # Set standby time (1-60 minutes, 0 disables)
D [27/May/2021:12:59:53 +0200] [ -x num ]       # Set USB iSerialNumber Reporting (1 on, 0 off)
D [27/May/2021:12:59:53 +0200] [ -X jobid ]     # Abort a printjob
D [27/May/2021:12:59:53 +0200] [CGI] # Mitsubishi CP-D90DW version 0.13
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=mitsubishi-d90dw mitsud90 
D [27/May/2021:12:59:53 +0200] [ -i ]           # Query printer info
D [27/May/2021:12:59:53 +0200] [ -j jobid ]     # Query job status
D [27/May/2021:12:59:53 +0200] [ -k time ]      # Set sleep time in minutes
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [ -m ]           # Query printer media
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query printer status
D [27/May/2021:12:59:53 +0200] [ -x 0|1 ]       # Enable/disable iSerial reporting
D [27/May/2021:12:59:53 +0200] [CGI] # Mitsubishi CP9xxx family version 0.47
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=mitsu9xxx mitsubishi-9000dw mitsubishi-9500dw mitsubishi-9550dw mitsubishi-9550dw-s mitsubishi-9600dw mitsubishi-9800dw mitsubishi-9800dw-s mitsubishi-9810dw mitsubishi-9550d mitsubishi-9550dz mitsubishi-9800d mitsubishi-9800dz mitsubishi-9810d mitsu9000 mitsu9500 mitsu9550 mitsu9600 mitsu9800 mitsu9810 
D [27/May/2021:12:59:53 +0200] [ -m ]           # Query media
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [ -X ]           # Cancel current job
D [27/May/2021:12:59:53 +0200] [CGI] # Mitsubishi P93D/P95D version 0.12
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=mitsup9x mitsubishi-p95d mitsubishi-p93d mitsup95d mitsup93d 
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [CGI] # DNP DS-series / Citizen C-series version 0.117
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=dnp_citizen dnpds40 dnp-ds40 dnp-ds80 dnp-ds80dx dnp-ds620 dnp-ds820 dnp-dsrx1 citizen-cw-01 citizen-cw-02 citizen-cx-02 dnpds80 dnpds80dx dnpds620 dnpds820 dnprx1 citizencw01 citizencw02 citizencx02 citizen-cx citizen-cx-w citizen-cy citizen-cy-02 citizen-op900 citizen-op900ii 
D [27/May/2021:12:59:53 +0200] [ -i ]           # Query printer info
D [27/May/2021:12:59:53 +0200] [ -I ]           # Query sensor  info
D [27/May/2021:12:59:53 +0200] [ -k num ]       # Set standby time (1-99 minutes, 0 disables)
D [27/May/2021:12:59:53 +0200] [ -K num ]       # Keep Media Status Across Power Cycles (1 on, 0 off)
D [27/May/2021:12:59:53 +0200] [ -n ]           # Query counters
D [27/May/2021:12:59:53 +0200] [ -N A|B|M ]     # Clear counter A/B/M
D [27/May/2021:12:59:53 +0200] [ -p num ]       # Set counter P
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [ -x num ]       # Set USB iSerialNumber Reporting (1 on, 0 off)
D [27/May/2021:12:59:53 +0200] [ -X ]           # Cancel current print job
D [27/May/2021:12:59:53 +0200] [CGI] # Magicard family version 0.16
D [27/May/2021:12:59:53 +0200] [CGI] BACKEND=magicard magicard-tango-2e magicard-enduro magicard-enduroplus magicard-rio-2e tango2e enduro enduroplus 
D [27/May/2021:12:59:53 +0200] [ -s ]           # Query status
D [27/May/2021:12:59:53 +0200] [ -q ]           # Query information
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [ -I ]           # Query printer sensors
D [27/May/2021:12:59:53 +0200] [ -E ]           # Eject card
D [27/May/2021:12:59:53 +0200] [ -T ]           # Print self-test card
D [27/May/2021:12:59:53 +0200] [ -R ]           # Reset printer
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"https\"...
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4966 (http) exited with no errors.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4973 (parallel) exited with no errors.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4981 (mdns) exited with no errors.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4982 (https) exited with no errors.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4964 (usb) exited with no errors.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4965 (gutenprint53+usb) exited with no errors.
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"socket\"...
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4983 (socket) exited with no errors.
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"hp\"...
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4974 (implicitclass) exited with no errors.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4980 (hp) exited with no errors.
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"ipp\"...
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4976 (ipp) exited with no errors.
D [27/May/2021:12:59:53 +0200] [CGI] \033[31;01merror: Failed to create /var/spool/cups/tmp/.hplip\033[0m
D [27/May/2021:12:59:53 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:53 +0200] [CGI] Flushed attributes...
D [27/May/2021:12:59:53 +0200] [cups-deviced] Found device \"hpfax\"...
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:53 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:53 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:53 +0200] [cups-deviced] PID 4969 (hpfax) exited with no errors.
D [27/May/2021:12:59:53 +0200] [CGI] sent=0, count=0
D [27/May/2021:12:59:54 +0200] [CGI] sent=0, count=0
I [27/May/2021:12:59:54 +0200] Expiring subscriptions...
D [27/May/2021:12:59:54 +0200] [cups-deviced] PID 4963 (dnssd) exited with no errors.
D [27/May/2021:12:59:55 +0200] [cups-deviced] PID 4972 (snmp) exited with no errors.
I [27/May/2021:12:59:55 +0200] Expiring subscriptions...
I [27/May/2021:12:59:56 +0200] Expiring subscriptions...
D [27/May/2021:12:59:56 +0200] [CGI] PID 4986 (ippfind) stopped with status 1!
D [27/May/2021:12:59:56 +0200] [CGI] PID 4987 (Post-processing) exited with no errors.
D [27/May/2021:12:59:56 +0200] [cups-deviced] PID 4979 (driverless) exited with no errors.
D [27/May/2021:12:59:56 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:56 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:56 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:56 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:56 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:56 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:56 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:56 +0200] [Client 24] CGI data ready to be sent.
D [27/May/2021:12:59:56 +0200] PID 4956 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [27/May/2021:12:59:56 +0200] [Client 24] con->http=0x55db1f6f6510
D [27/May/2021:12:59:56 +0200] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=4956, file=13
D [27/May/2021:12:59:56 +0200] [Client 24] Waiting for CGI data.
D [27/May/2021:12:59:56 +0200] [Client 24] Sending 0-length chunk.
D [27/May/2021:12:59:56 +0200] [Client 24] Flushing write buffer.
D [27/May/2021:12:59:56 +0200] [Client 24] New state is HTTP_STATE_WAITING
D [27/May/2021:12:59:56 +0200] [Client 24] Waiting for request.
D [27/May/2021:12:59:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:12:59:56 +0200] [Client 24] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:12:59:56 +0200] [Client 24] Closing connection.
D [27/May/2021:12:59:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:12:59:57 +0200] Expiring subscriptions...
D [27/May/2021:13:00:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:13:00:17 +0200] [Client 25] Server address is "/run/cups/cups.sock".
D [27/May/2021:13:00:17 +0200] [Client 25] Accepted from localhost (Domain)
D [27/May/2021:13:00:17 +0200] [Client 25] Waiting for request.
I [27/May/2021:13:00:17 +0200] Expiring subscriptions...
D [27/May/2021:13:00:17 +0200] [Client 25] POST / HTTP/1.1
D [27/May/2021:13:00:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/May/2021:13:00:17 +0200] [Client 25] Read: status=200, state=6
D [27/May/2021:13:00:17 +0200] [Client 25] No authentication data provided.
D [27/May/2021:13:00:17 +0200] [Client 25] 2.0 CUPS-Get-Printers 1
D [27/May/2021:13:00:17 +0200] CUPS-Get-Printers
D [27/May/2021:13:00:17 +0200] [Client 25] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [27/May/2021:13:00:17 +0200] [Client 25] Content-Length: 17774
D [27/May/2021:13:00:17 +0200] [Client 25] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:13:00:17 +0200] [Client 25] con->http=0x55db1f6f6510
D [27/May/2021:13:00:17 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=17774, response=0x55db1f6d0150(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:13:00:17 +0200] [Client 25] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:13:00:17 +0200] [Client 25] bytes=0, http_state=0, data_remaining=17774
D [27/May/2021:13:00:17 +0200] [Client 25] Flushing write buffer.
D [27/May/2021:13:00:17 +0200] [Client 25] New state is HTTP_STATE_WAITING
D [27/May/2021:13:00:17 +0200] [Client 25] Waiting for request.
D [27/May/2021:13:00:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:13:00:17 +0200] [Client 25] POST / HTTP/1.1
D [27/May/2021:13:00:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/May/2021:13:00:17 +0200] [Client 25] Read: status=200, state=6
D [27/May/2021:13:00:17 +0200] [Client 25] No authentication data provided.
D [27/May/2021:13:00:17 +0200] [Client 25] 2.0 CUPS-Get-Classes 1
D [27/May/2021:13:00:17 +0200] CUPS-Get-Classes
D [27/May/2021:13:00:17 +0200] [Client 25] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [27/May/2021:13:00:17 +0200] [Client 25] Content-Length: 75
D [27/May/2021:13:00:17 +0200] [Client 25] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/May/2021:13:00:17 +0200] [Client 25] con->http=0x55db1f6f6510
D [27/May/2021:13:00:17 +0200] [Client 25] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55db1f74d030(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/May/2021:13:00:17 +0200] [Client 25] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/May/2021:13:00:17 +0200] [Client 25] bytes=0, http_state=0, data_remaining=75
D [27/May/2021:13:00:17 +0200] [Client 25] Flushing write buffer.
D [27/May/2021:13:00:17 +0200] [Client 25] New state is HTTP_STATE_WAITING
D [27/May/2021:13:00:17 +0200] [Client 25] Waiting for request.
D [27/May/2021:13:00:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [27/May/2021:13:00:17 +0200] [Client 25] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/May/2021:13:00:17 +0200] [Client 25] Closing connection.
D [27/May/2021:13:00:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [27/May/2021:13:00:18 +0200] Expiring subscriptions...
laurent@laurent-Inspiron-3505:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                        Version                               Architecture Description
+++-==========================================-=====================================-============-======================================================================================================
rc  gnome-software                             3.36.1-0ubuntu0.20.04.0               amd64        Software Center for GNOME
rc  libpython3.6-minimal:amd64                 3.6.9-1~18.04ubuntu1.4                amd64        Minimal subset of the Python language (version 3.6)
rc  libsensors4:amd64                          1:3.4.0-4                             amd64        library to read temperature/voltage/fan sensors
rc  libssl1.0.0:amd64                          1.0.2n-1ubuntu5.6                     amd64        Secure Sockets Layer toolkit - shared libraries
rc  linux-image-4.15.0-29-generic              4.15.0-29.31                          amd64        Signed kernel image generic
rc  linux-modules-4.15.0-29-generic            4.15.0-29.31                          amd64        Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-4.15.0-29-generic      4.15.0-29.31                          amd64        Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc  python                                     2.7.15~rc1-1                          amd64        interactive high-level object-oriented language (default version)
rc  python3.6-minimal                          3.6.9-1~18.04ubuntu1.4                amd64        Minimal subset of the Python language (version 3.6)
rc  ureadahead                                 0.100.0-21                            amd64        Read required files in advance
laurent@laurent-Inspiron-3505:~$

   
Merci pour votre aide

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#7 Le 27/05/2021, à 14:11

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour Eric 63 ,
Le retour sur br-printer :

#!/bin/bash
# Script d'installation pour imprimantes Brother

. /lib/lsb/init-functions

MODEL_NAME=$1
USER=${SUDO_USER}
DIR=$(pwd)/$(dirname $0)
TEMP_DIR="${DIR}/packages"
CODENAME=$(lsb_release -cs)
ARCH=$(uname -m)
LOGFILE="${DIR}/brprinter-installer.log"
LIB_DIR="/usr/lib/${ARCH}-linux-gnu"
URL_INF="http://www.brother.com/pub/bsc/linux/infs"
URL_PKG="http://www.brother.com/pub/bsc/linux/packages"
UDEV_RULES="/lib/udev/rules.d/60-libsane1.rules"
UDEV_DEB="brother-udev-rule-type1-1.0.0-1.all.deb"
UDEV_DEB_URL="http://www.brother.com/pub/bsc/linux/dlf/${UDEV_DEB}"
BLUE="\\033[1;34m"
RED="\\033[1;31m"
RESETCOLOR="\\033[0;0m"

#########################
# PRÉPARATION DU SCRIPT #
#########################
function do_init_script() {
	# On vérifie qu'on lance le script en root
	if [[ ${EUID} != "0" ]]; then
		echo -e ${RED}"Vous devez lancer ce script en tant que root : sudo bash $0"${RESETCOLOR}
		exit 0
	fi
	# Si un log existe déjà on le renomme
	if [[ -e ${LOGFILE} ]]; then
		mv ${LOGFILE} ${LOGFILE}.old
	fi
	touch ${LOGFILE}
	# Si le premier argument est vide on demande le modèle de l'imprimante
	while [[ -z "${MODEL_NAME}" ]]; do
		read -p "Entrez votre modèle : " MODEL_NAME
	done
	MODEL_NAME=$(echo ${MODEL_NAME} | tr [a-z] [A-Z])
	# On demande comment est connectée l'imprimante
	echo "Sélectionner le type de connectivité : [0] USB - [1] Réseau"
	while [[ -z ${CONNECTION} ]]; do
		read -p "Entrez votre choix : "
		case $REPLY in
			0)
				CONNECTION="USB"
			;;
			1)
				CONNECTION="Réseau"
				echo -e ${RED}"Vous devriez vous assurer que votre imprimante possède une adresse IP fixe."${RESETCOLOR}
				echo -e ${RED}"Veuillez consulter le manuel de votre imprimante pour plus de détails : http://support.brother.com/g/b/productsearch.aspx?c=fr&lang=fr&content=ml"${RESETCOLOR}
				read -p "Entrez l'adresse IP de votre imprimante : " IP
				# On valide le format de l'adresse IP de l'imprimante
				IP=$(echo ${IP} | awk -F'[.]' '{w=$1+0; x=$2+0; y=$3+0; z=$4+0; print w"."x"."y"."z}')
			;;
		esac
	done
	echo "# Ubuntu Codename : ${CODENAME}" &>> ${LOGFILE}
	echo "# Architecture : ${ARCH}" &>> ${LOGFILE}
	echo "# Modèle de l'imprimante : ${MODEL_NAME}" &>> ${LOGFILE}
	echo "# Connexion : ${CONNECTION}" &>> ${LOGFILE}
	if [[ ${CONNECTION} == "Réseau " ]]; then
		echo "# Adresse IP : ${IP}" &>> ${LOGFILE}
	fi
}

##############################
# TÉLÉCHARGEMENT DES PILOTES #
##############################
function do_download_drivers() {
	echo -e ${BLUE}"Téléchargement des pilotes de l'imprimante"${RESETCOLOR}
	# On transforme le nom de l'imprimante
	log_action_begin_msg "Recherche des pilotes"
	PRINTER_NAME=$(echo ${MODEL_NAME} | sed -e 's/-//' | tr [a-z] [A-Z])
	# On construit l'URL du fichier contenant les informations
	PRINTER_INFO="${URL_INF}/${PRINTER_NAME}"
	# On vérifie l'URL
	if ! wget -q --spider ${PRINTER_INFO}; then
		log_action_end_msg 1
		echo " - Aucun pilote trouvé" &>> ${LOGFILE}
		echo -e ${RED}"Aucun pilote trouvé. Veuillez vérifier le modèle de votre imprimante ou visitez la page suivante http://support.brother.com/g/b/productsearch.aspx?c=us&lang=en&content=dl afin de télécharger les pilotes et les installer manuellement."${RESETCOLOR}
		exit 1
	fi
	# On vérifie que le fichier fournit les informations
	LNK=$(wget -q ${PRINTER_INFO} -O - | grep LNK - | cut -d\= -f2)
	if [[ ${LNK} ]]; then
		PRINTER_INFO="${URL_INF}/${LNK}"
		echo "# Link to : ${PRINTER_INFO}" &>> ${LOGFILE}
	fi
	echo "# Fichier d'informations : ${PRINTER_INFO}" &>> ${LOGFILE}
	# On récupère le nom des paquets disponibles
	PRINTER_LPD_DEB=$(wget -q ${PRINTER_INFO} -O - | grep PRN_LPD_DEB - | cut -d\= -f2)
	PRINTER_CUPS_DEB=$(wget -q ${PRINTER_INFO} -O - | grep PRN_CUP_DEB - | cut -d\= -f2)
	PRINTER_DRV_DEB=$(wget -q ${PRINTER_INFO} -O - | grep PRN_DRV_DEB - | cut -d\= -f2)
	SCANNER_DEB=$(wget -q ${PRINTER_INFO} -O - | grep SCANNER_DRV - | cut -d\= -f2)
	SCANNER_INFO="${URL_INF}/${SCANNER_DEB}.lnk"
	SCANKEY_DEB=$(wget -q ${PRINTER_INFO} -O - | grep SCANKEY_DRV - | cut -d\= -f2)
	SCANKEY_INFO="${URL_INF}/${SCANKEY_DEB}.lnk"
	# On récupère les pilotes du scanner en fonctionnement de l'architecture du système (32-bits ou 64-bits)
	case ${ARCH} in
		i*86)
			SCANNER_DRV_DEB=$(wget -q ${SCANNER_INFO} -O - | grep DEB32 | cut -d\= -f2)
			SCANKEY_DRV_DEB=$(wget -q ${SCANKEY_INFO} -O - | grep DEB32 | cut -d\= -f2)
		;;
		x86_64)
			SCANNER_DRV_DEB=$(wget -q ${SCANNER_INFO} -O - | grep DEB64 | cut -d\= -f2)
			SCANKEY_DRV_DEB=$(wget -q ${SCANKEY_INFO} -O - | grep DEB64 | cut -d\= -f2)
		;;
		*)
			echo "Architecture inconnue: ${ARCH}" &>> ${LOGFILE}
		;;
	esac
	# On ajoute la liste des pilotes trouvés au fichier de journalisation
	for PKG in ${PRINTER_LPD_DEB} ${PRINTER_CUPS_DEB} ${PRINTER_DRV_DEB} ${SCANNER_DRV_DEB} ${SCANKEY_DRV_DEB}; do
		if [[ ! -z ${PKG} ]]; then
			echo " - Paquet trouvé : ${PKG}" &>> ${LOGFILE}
		fi
	done
	log_action_end_msg 0
	# On crée le dossier de téléchargement des paquets
	if [[ ! -d ${TEMP_DIR} ]]; then
		mkdir ${TEMP_DIR}
	fi
	# On télécharge les pilotes trouvés
	for PKG in ${PRINTER_LPD_DEB} ${PRINTER_CUPS_DEB} ${PRINTER_DRV_DEB} ${SCANNER_DRV_DEB} ${SCANKEY_DRV_DEB}; do
		URL_DEB="${URL_PKG}/${PKG}"
		echo &>> ${LOGFILE}
		echo "# Téléchargement du paquet : ${PKG}" &>> ${LOGFILE}
		log_action_begin_msg "Téléchargement du paquet : ${PKG}"
		wget -cP ${TEMP_DIR} "${URL_DEB}" &>> ${LOGFILE}
		log_action_end_msg $?
	done
	# On télécharge le fichier pour udev pour les scanners
	if [[ ! -z ${SCANNER_DRV_DEB} ]]; then
		echo "# Téléchargement du paquet : brother-udev-rule-type1-1.0.0-1.all.deb" &>> ${LOGFILE}
		log_action_begin_msg "Téléchargement du paquet : ${UDEV_DEB}"
		wget -cP ${TEMP_DIR} "${UDEV_DEB_URL}" &>> ${LOGFILE}
		log_action_end_msg $?
	fi
}

###############################
# VERIFICATION DES PRÉ-REQUIS #
###############################
function do_check_prerequisites() {
	echo -e ${BLUE}"Vérification des pré-requis"${RESETCOLOR}
	echo "# Vérification des pré-requis" &>> ${LOGFILE}
	log_action_begin_msg "Mise à jour de la liste des paquets"
	apt-get update -qq
	log_action_end_msg $?
	# On vérifie que le paquet multiarch-support est installé et on l'installe le cas échéant (Ubuntu 64-bits seulement)
	if [[ "${ARCH}" == "x86_64" ]]; then
		log_action_begin_msg "Recherche du paquet 'multiarch-support' sur votre système"
		if dpkg -s multiarch-support &>/dev/null; then
			log_action_end_msg $?
			echo " - Paquet 'multiarch-support' installé" &>> ${LOGFILE}
		else
			log_action_end_msg 1
			echo " - Paquet 'multiarch-support' non installé" &>> ${LOGFILE}
			log_action_begin_msg "Installation du paquet 'multiarch-support'"
			echo "# Installation de 'multiarch-support'" &>> ${LOGFILE}
			apt-get install -qq multiarch-support &>> ${LOGFILE}
			log_action_end_msg $?
			echo " - Paquet 'multiarch-support' installé" &>> ${LOGFILE}
		fi
		log_action_begin_msg "Recherche du paquet 'lib32stdc++6' sur votre système"
		if dpkg -s lib32stdc++6 &>/dev/null; then
			log_action_end_msg $?
			echo " - Paquet 'lib32stdc++6' installé" &>> ${LOGFILE}
		else
			log_action_end_msg 1
			echo " - Paquet 'lib32stdc++6' non installé" &>> ${LOGFILE}
			log_action_begin_msg "Installation du paquet 'lib32stdc++6'"
			echo "# Installation de 'lib32stdc++6'" &>> ${LOGFILE}
			apt-get install -qq lib32stdc++6 &>> ${LOGFILE}
			log_action_end_msg $?
			echo " - Paquet 'lib32stdc++6' installé" &>> ${LOGFILE}
		fi
	fi
	# On vérifie que le paquet cups est installé et on l'installe le cas échéant
	log_action_begin_msg "Recherche du paquet 'cups' sur votre système"
	if dpkg -s cups &>/dev/null; then
		log_action_end_msg $?
		echo " - Paquet 'cups' installé" &>> ${LOGFILE}
	else
		log_action_end_msg 1
		log_action_begin_msg "Installation du paquet 'cups'"
		echo "# Installation de 'cups'" &>> ${LOGFILE}
		apt-get install -qq cups &>> ${LOGFILE}
		log_action_end_msg $?
		echo " - Paquet 'cups' installé" &>> ${LOGFILE}
	fi
	# Si un pilote pour le scanner a été trouvé on vérifie que sane-utils est installé
	if [[ ! -z ${SCANNER_DEB} ]]; then
		log_action_begin_msg "Recherche du paquet 'sane-utils' sur votre système"
		if dpkg -s sane-utils &>/dev/null; then
			log_action_end_msg $?
			echo " - Paquet 'sane-utils' installé" &>> ${LOGFILE}
		else
			log_action_end_msg 1
			echo " - Paquet 'sane-utils' non installé" &>> ${LOGFILE}
			log_action_begin_msg "Installation du paquet 'sane-utils'"
			echo "# Installation de 'sane-utils'" &>> ${LOGFILE}
			apt-get install -qq sane-utils &>> ${LOGFILE}
			log_action_end_msg $?
			echo " - Paquet 'sane-utils' installé" &>> ${LOGFILE}
		fi
		# On vérifie que libusb-0.1-4:i386 est installé
		if [[ ${CONNECTION} == "USB" ]]; then
			log_action_begin_msg "Recherche du paquet 'libusb-0.1-4' sur votre système"
			if dpkg -s libusb-0.1-4 &>/dev/null; then
				log_action_end_msg $?
				echo " - Paquet 'libusb-0.1-4' installé" &>> ${LOGFILE}
			else
				log_action_end_msg 1
				echo " - Paquet 'libusb-0.1-4' non installé" &>> ${LOGFILE}
				log_action_begin_msg "Installation du paquet 'libusb-0.1-4'"
				echo "# Installation de 'libusb-0.1-4'" &>> ${LOGFILE}
				apt-get install -qq libusb-0.1-4 &>> ${LOGFILE}
				log_action_end_msg $?
				echo " - Paquet 'libusb-0.1-4' installé" &>> ${LOGFILE}
			fi
		fi
	fi
	# On vérifie que le paquet csh est installé et on l'installe le cas échéant (uniquement pour certaines imprimantes)
	for i in DCP-110C DCP-115C DCP-117C DCP-120C DCP-310CN DCP-315CN DCP-340CW FAX-1815C FAX-1820C FAX-1835C FAX-1840C FAX-1920CN FAX-1940CN FAX-2440C MFC-210C MFC-215C MFC-3220C MFC-3240C MFC-3320CN MFC-3340CN MFC-3420C MFC-3820CN MFC-410CN MFC-420CN MFC-425CN MFC-5440CN MFC-5840CN MFC-620CN MFC-640CW MFC-820CW; do
		if [[ ${MODEL_NAME} == "$i" ]]; then
			log_action_begin_msg "Recherche du paquet 'csh' sur votre système"
			if [[ ! -x /bin/csh ]]; then
				log_action_end_msg 1
				log_action_begin_msg "Installation du paquet 'csh'"
				echo "# Installation du paquet 'csh'" &>> ${LOGFILE}
				apt-get install -qq csh &>> ${LOGFILE}
				log_action_end_msg $?
				echo " - Paquet 'csh' installé" &>> ${LOGFILE}
			else
				log_action_end_msg $?
			fi
		fi
	done
	# On vérifie que le dossier /usr/share/cups/model existe et on le crée le cas échéant
	log_action_begin_msg "Recherche du dossier '/usr/share/cups/model' sur votre système"
	if [[ -d /usr/share/cups/model ]]; then
		log_action_end_msg $?
	else
		log_action_end_msg 1
		log_action_begin_msg "Creation du dossier '/usr/share/cups/model'"
		mkdir -p /usr/share/cups/model
		log_action_end_msg $?
	fi
	# On vérifie que le dossier /var/spool/lpd existe et on le crée le cas échéant
	log_action_begin_msg "Recherche du dossier '/var/spool/lpd' sur votre système"
	if [[ -d /var/spool/lpd ]]; then
		log_action_end_msg $?
	else
		log_action_end_msg 1
		log_action_begin_msg "Creation du dossier '/var/spool/lpd'"
		mkdir -p /var/spool/lpd
		log_action_end_msg $?
	fi
	# On vérifie que le lien symbolique /etc/init.d/lpd existe et on le crée le cas échéant (uniquement pour certaines imprimantes)
	for i in DCP-1000 DCP-1400 DCP-8020 DCP-8025D DCP-8040 DCP-8045D DCP-8060 DCP-8065DN FAX-2850 FAX-2900 FAX-3800 FAX-4100 FAX-4750e FAX-5750e HL-1030 HL-1230 HL-1240 HL-1250 HL-1270N HL-1430 HL-1440 HL-1450 HL-1470N HL-1650 HL-1670N HL-1850 HL-1870N HL-5030 HL-5040 HL-5050 HL-5070N HL-5130 HL-5140 HL-5150D HL-5170DN HL-5240 HL-5250DN HL-5270DN HL-5280DW HL-6050 HL-6050D MFC-4800 MFC-6800 MFC-8420 MFC-8440 MFC-8460N MFC-8500 MFC-8660DN MFC-8820D MFC-8840D MFC-8860DN MFC-8870DW MFC-9030 MFC-9070 MFC-9160 MFC-9180 MFC-9420CN MFC-9660 MFC-9700 MFC-9760 MFC-9800 MFC-9860 MFC-9880; do
		if [[ ${MODEL_NAME} == "$i" ]]; then
			log_action_begin_msg "Recherche du lien symbolique '/etc/init.d/lpd ~> /etc/init.d/cups' sur votre système"
			if [[ -L /etc/init.d/lpd ]]; then
				log_action_end_msg 0
			else
				log_action_end_msg 1
				log_action_begin_msg "Creation du lien symbolique '/etc/init.d/lpd ~> /etc/init.d/cups'"
				ln -s /etc/init.d/cups /etc/init.d/lpd
				# On crée un lien symbolique vers cups.service si systemd est utilisé
				if [[ -L /sbin/init ]]; then
					ln -s /lib/systemd/system/cups.service /lib/systemd/system/lpd.service
					systemd-daemon reload
				fi
				log_action_end_msg $?
			fi
		fi
	done
}

############################
# INSTALLATION DES PAQUETS #
############################
function do_install_drivers() {
	echo -e ${BLUE}"Installation des pilotes"${RESETCOLOR}
	for PKG in ${PRINTER_LPD_DEB} ${PRINTER_CUPS_DEB} ${PRINTER_DRV_DEB} ${SCANNER_DRV_DEB} ${SCANKEY_DRV_DEB}; do
		log_action_begin_msg "Installation du paquet : ${PKG}"
		echo &>> ${LOGFILE}
		echo "# Installation du paquet : ${PKG}" &>> ${LOGFILE}
		dpkg -i --force-all "${TEMP_DIR}/${PKG}" &>> ${LOGFILE}
		log_action_end_msg $?
	done
	if [[ ! -z ${SCANNER_DRV_DEB} ]]; then
		log_action_begin_msg "Installation du paquet : ${UDEV_DEB}"
		echo &>> ${LOGFILE}
		echo "# Installation du paquet : ${UDEV_DEB}" &>> ${LOGFILE}
		dpkg -i --force-all "${TEMP_DIR}/${UDEV_DEB}" &>> ${LOGFILE}
		log_action_end_msg $?
	fi
}

#################################
# CONFIGURATION DE L'IMPRIMANTE #
#################################
function do_configure_printer() {
	echo -e ${BLUE}"Configuration de l'imprimante"${RESETCOLOR}
	# On recherche un fichier ppd
	log_action_begin_msg "Recherche d'un fichier PPD sur votre système"
	echo &>> ${LOGFILE}
	echo "# Recherche d'un fichier PPD" &>> ${LOGFILE}
	for PKG in ${PRINTER_CUPS_DEB} ${PRINTER_DRV_DEB}; do
		PPD_FILE=$(dpkg --contents ${TEMP_DIR}/${PKG} | grep ppd | awk '{print $6}' | sed 's/^.//g')
	done
	if [[ -z "${PPD_FILE}" ]]; then
		for FILE in $(find /usr/share/cups/model -type f); do
			if [[ $(grep -i Brother ${FILE} | grep -E "(${MODEL_NAME}|${PRINTER_NAME})") ]]; then
				PPD_FILE=${FILE}
			fi
		done
	fi
	echo " - Fichier PPD : ${PPD_FILE}" &>> ${LOGFILE}
	log_action_end_msg 0
	# On ajoute une nouvelle imprimante
	log_action_begin_msg "Ajout de l'imprimante ${MODEL_NAME}"
	echo &>> ${LOGFILE}
	echo "# Ajout de l'imprimante ${MODEL_NAME}" &>> ${LOGFILE}
	echo " - Backup du fichier /etc/cups/printers.conf.O" &>> ${LOGFILE}
	cp /etc/cups/printers.conf.O ${DIR} &>> ${LOGFILE}
	echo " - Arret du service CUPS" &>> ${LOGFILE}
	systemctl stop cups &>> ${LOGFILE}
	echo " - Restauration du fichier printers.conf" &>> ${LOGFILE}
	cp ${DIR}/printers.conf.O /etc/cups/printers.conf &>> ${LOGFILE}
	echo " - Redémarrage du service CUPS" &>> ${LOGFILE}
	systemctl restart cups &>> ${LOGFILE}
	case ${CONNECTION} in
	"USB")
		sleep 2 && lpadmin -p "${MODEL_NAME}" -E -v usb://dev/usb/lp0 -P "${PPD_FILE}"
	;;
	"Réseau")
		sleep 2 && lpadmin -p "${MODEL_NAME}" -E -v lpd://"${IP}"/binary_p1 -P "${PPD_FILE}"
	;;
	esac
	log_action_end_msg $?
	echo " - Restauration du fichier printers.conf.O" &>> ${LOGFILE}
	cp ${DIR}/printers.conf.O /etc/cups/printers.conf.O &>> ${LOGFILE}
}

############################
# CONFIGURATION DU SCANNER #
############################
function do_configure_scanner() {
	if [[ ! -z ${SCANNER_DEB} ]]; then
		echo -e ${BLUE}"Configuration du scanner"${RESETCOLOR}
		echo &>> ${LOGFILE}
		echo "# Configuration du scanner" &>> ${LOGFILE}
		if [[ ${CONNECTION} == "USB" ]]; then
			# Installation du paquet brother-udev
			dpkg -i --force-all "${TEMP_DIR}/brother-udev-rule-type1-1.0.0-1.all.deb" &>> ${LOGFILE}
			# On ajoute une entrée au fichier udev
			if [[ ! $(grep 'ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"' ${UDEV_RULES}) ]]; then
				echo 'Adding ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes" to ${UDEV_RULES}' &>> ${LOGFILE}
				sed -i '/LABEL="libsane_usb_rules_begin"/a\
				\n# Brother\nATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"' ${UDEV_RULES}
			else
				echo "Règle udev trouvée dans le fichier ${UDEV_RULES}" &>> ${LOGFILE}
			fi
			# On recharge les règles udev
			udevadm control --reload
		elif [[ ${CONNECTION} == "Réseau" ]]; then
			log_action_begin_msg "Configuration du scanner réseau"
			if [[ -x /usr/bin/brsaneconfig ]]; then
				brsaneconfig -a name="SCANNER" model="${MODEL_NAME}" ip="${IP}" &>> ${LOGFILE}
			elif [[ -x /usr/bin/brsaneconfig2 ]]; then
				brsaneconfig2 -a name="SCANNER" model="${MODEL_NAME}" ip="${IP}" &>> ${LOGFILE}
			elif [[ -x /usr/bin/brsaneconfig3 ]]; then
				brsaneconfig3 -a name="SCANNER" model="${MODEL_NAME}" ip="${IP}" &>> ${LOGFILE}
			elif [[ -x /usr/bin/brsaneconfig4 ]]; then
				sed -i '/Support Model/a\
0x029a, 117, 1, "MFC-8690DW", 133, 4\
0x0279, 14, 2, "DCP-J525W"\
0x027b, 13, 2, "DCP-J725DW"\
0x027d, 13, 2, "DCP-J925DW"\
0x027f, 14, 1, "MFC-J280W"\
0x028f, 13, 1, "MFC-J425W"\
0x0281, 13, 1, "MFC-J430W"\
0x0280, 13, 1, "MFC-J435W"\
0x0282, 13, 1, "MFC-J625DW"\
0x0283, 13, 1, "MFC-J825DW"\
0x028d, 13, 1, "MFC-J835DW"' /opt/brother/scanner/brscan4/Brsane4.ini
				brsaneconfig4 -a name=SCANNER model=${MODEL_NAME} ip=${IP} &>> ${LOGFILE}
			fi
			log_action_end_msg $?
		fi
		# On copie les librairies
		if [[ ${ARCH} == "x86_64" ]] && [[ -d ${LIB_DIR} ]]; then
			log_action_begin_msg "Copie des librairies nécessaires"
			if [[ -e /usr/bin/brsaneconfig ]]; then
				cd ${LIB_DIR}
				cp --force /usr/lib64/libbrcolm.so.1.0.1 .
				ln -sf libbrcolm.so.1.0.1 libbrcolm.so.1
				ln -sf libbrcolm.so.1 libbrcolm.so
				cp --force /usr/lib64/libbrscandec.so.1.0.0 ${LIB_DIR}
				ln -sf libbrscandec.so.1.0.0 libbrscandec.so.1
				ln -sf libbrscandec.so.1 libbrscandec.so
				cd ${LIB_DIR}/sane
				cp --force /usr/lib64/sane/libsane-brother.so.1.0.7 .
				ln -sf libsane-brother.so.1.0.7 libsane-brother.so.1
				ln -sf libsane-brother.so.1 libsane-brother.so
				log_action_end_msg 0
			elif [[ -e /usr/bin/brsaneconfig2 ]]; then
				cd ${LIB_DIR}
				cp --force /usr/lib64/libbrscandec2.so.1.0.0 .
				ln -sf libbrscandec2.so.1.0.0 libbrscandec2.so.1
				ln -sf libbrscandec2.so.1 libbrscandec2.so
				cp --force /usr/lib64/libbrcolm2.so.1.0.1 .
				ln -sf libbrcolm2.so.1.0.1 libbrcolm2.so.1
				ln -sf libbrcolm2.so.1 libbrcolm2.so
				cd ${LIB_DIR}/sane
				cp --force /usr/lib64/sane/libsane-brother2.so.1.0.7 .
				ln -sf libsane-brother2.so.1.0.7 libsane-brother2.so.1
				ln -sf libsane-brother2.so.1 libsane-brother2.so
				log_action_end_msg 0
			elif [[ -e /usr/bin/brsaneconfig3 ]]; then
				cd ${LIB_DIR}
				cp --force /usr/lib64/libbrscandec3.so.1.0.0 .
				ln -sf libbrscandec3.so.1.0.0 libbrscandec3.so.1
				ln -sf libbrscandec3.so.1 libbrscandec3.so
				cd ${LIB_DIR}/sane
				cp --force /usr/lib64/sane/libsane-brother3.so.1.0.7 .
				ln -sf libsane-brother3.so.1.0.7 libsane-brother3.so.1
				ln -sf libsane-brother3.so.1 libsane-brother3.so
				log_action_end_msg 0
			elif [[ -e /usr/bin/brsaneconfig4 ]]; then
				cd ${LIB_DIR}/sane
				cp --force /usr/lib64/sane/libsane-brother4.so.1.0.7 .
				ln -sf libsane-brother4.so.1.0.7 libsane-brother4.so.1
				ln -sf libsane-brother4.so.1 libsane-brother4.so
				log_action_end_msg 0
			else
				log_action_end_msg 1
				echo -e ${RED}"No config binary found."${RESETCOLOR}
			fi
		fi
	fi
}

#################
# FIN DU SCRIPT #
#################
function do_clean() {
	# On supprime le fichier printers.conf.O
	if [[ -e ${DIR}/printers.conf.O ]]; then
		rm ${DIR}/printers.conf.O &>> ${LOGFILE}
	fi
	# On réattribue les droits des dossiers/fichiers crées à l'utilisateur
	chown -R ${USER}: ${TEMP_DIR} ${LOGFILE}
	exit 0
}

do_init_script
do_download_drivers
do_check_prerequisites
do_install_drivers
do_configure_printer#!/bin/bash
# Script d'installation pour imprimantes Brother

. /lib/lsb/init-functions

MODEL_NAME=$1
USER=${SUDO_USER}
DIR=$(pwd)/$(dirname $0)
TEMP_DIR="${DIR}/packages"
CODENAME=$(lsb_release -cs)
ARCH=$(uname -m)
LOGFILE="${DIR}/brprinter-installer.log"
LIB_DIR="/usr/lib/${ARCH}-linux-gnu"
URL_INF="http://www.brother.com/pub/bsc/linux/infs"
URL_PKG="http://www.brother.com/pub/bsc/linux/packages"
UDEV_RULES="/lib/udev/rules.d/60-libsane1.rules"
UDEV_DEB="brother-udev-rule-type1-1.0.0-1.all.deb"
UDEV_DEB_URL="http://www.brother.com/pub/bsc/linux/dlf/${UDEV_DEB}"
BLUE="\\033[1;34m"
RED="\\033[1;31m"
RESETCOLOR="\\033[0;0m"

#########################
# PRÉPARATION DU SCRIPT #
#########################
function do_init_script() {
	# On vérifie qu'on lance le script en root
	if [[ ${EUID} != "0" ]]; then
		echo -e ${RED}"Vous devez lancer ce script en tant que root : sudo bash $0"${RESETCOLOR}
		exit 0
	fi
	# Si un log existe déjà on le renomme
	if [[ -e ${LOGFILE} ]]; then
		mv ${LOGFILE} ${LOGFILE}.old
	fi
	touch ${LOGFILE}
	# Si le premier argument est vide on demande le modèle de l'imprimante
	while [[ -z "${MODEL_NAME}" ]]; do
		read -p "Entrez votre modèle : " MODEL_NAME
	done
	MODEL_NAME=$(echo ${MODEL_NAME} | tr [a-z] [A-Z])
	# On demande comment est connectée l'imprimante
	echo "Sélectionner le type de connectivité : [0] USB - [1] Réseau"
	while [[ -z ${CONNECTION} ]]; do
		read -p "Entrez votre choix : "
		case $REPLY in
			0)
				CONNECTION="USB"
			;;
			1)
				CONNECTION="Réseau"
				echo -e ${RED}"Vous devriez vous assurer que votre imprimante possède une adresse IP fixe."${RESETCOLOR}
				echo -e ${RED}"Veuillez consulter le manuel de votre imprimante pour plus de détails : http://support.brother.com/g/b/productsearch.aspx?c=fr&lang=fr&content=ml"${RESETCOLOR}
				read -p "Entrez l'adresse IP de votre imprimante : " IP
				# On valide le format de l'adresse IP de l'imprimante
				IP=$(echo ${IP} | awk -F'[.]' '{w=$1+0; x=$2+0; y=$3+0; z=$4+0; print w"."x"."y"."z}')
			;;
		esac
	done
	echo "# Ubuntu Codename : ${CODENAME}" &>> ${LOGFILE}
	echo "# Architecture : ${ARCH}" &>> ${LOGFILE}
	echo "# Modèle de l'imprimante : ${MODEL_NAME}" &>> ${LOGFILE}
	echo "# Connexion : ${CONNECTION}" &>> ${LOGFILE}
	if [[ ${CONNECTION} == "Réseau " ]]; then
		echo "# Adresse IP : ${IP}" &>> ${LOGFILE}
	fi
}

##############################
# TÉLÉCHARGEMENT DES PILOTES #
##############################
function do_download_drivers() {
	echo -e ${BLUE}"Téléchargement des pilotes de l'imprimante"${RESETCOLOR}
	# On transforme le nom de l'imprimante
	log_action_begin_msg "Recherche des pilotes"
	PRINTER_NAME=$(echo ${MODEL_NAME} | sed -e 's/-//' | tr [a-z] [A-Z])
	# On construit l'URL du fichier contenant les informations
	PRINTER_INFO="${URL_INF}/${PRINTER_NAME}"
	# On vérifie l'URL
	if ! wget -q --spider ${PRINTER_INFO}; then
		log_action_end_msg 1
		echo " - Aucun pilote trouvé" &>> ${LOGFILE}
		echo -e ${RED}"Aucun pilote trouvé. Veuillez vérifier le modèle de votre imprimante ou visitez la page suivante http://support.brother.com/g/b/productsearch.aspx?c=us&lang=en&content=dl afin de télécharger les pilotes et les installer manuellement."${RESETCOLOR}
		exit 1
	fi
	# On vérifie que le fichier fournit les informations
	LNK=$(wget -q ${PRINTER_INFO} -O - | grep LNK - | cut -d\= -f2)
	if [[ ${LNK} ]]; then
		PRINTER_INFO="${URL_INF}/${LNK}"
		echo "# Link to : ${PRINTER_INFO}" &>> ${LOGFILE}
	fi
	echo "# Fichier d'informations : ${PRINTER_INFO}" &>> ${LOGFILE}
	# On récupère le nom des paquets disponibles
	PRINTER_LPD_DEB=$(wget -q ${PRINTER_INFO} -O - | grep PRN_LPD_DEB - | cut -d\= -f2)
	PRINTER_CUPS_DEB=$(wget -q ${PRINTER_INFO} -O - | grep PRN_CUP_DEB - | cut -d\= -f2)
	PRINTER_DRV_DEB=$(wget -q ${PRINTER_INFO} -O - | grep PRN_DRV_DEB - | cut -d\= -f2)
	SCANNER_DEB=$(wget -q ${PRINTER_INFO} -O - | grep SCANNER_DRV - | cut -d\= -f2)
	SCANNER_INFO="${URL_INF}/${SCANNER_DEB}.lnk"
	SCANKEY_DEB=$(wget -q ${PRINTER_INFO} -O - | grep SCANKEY_DRV - | cut -d\= -f2)
	SCANKEY_INFO="${URL_INF}/${SCANKEY_DEB}.lnk"
	# On récupère les pilotes du scanner en fonctionnement de l'architecture du système (32-bits ou 64-bits)
	case ${ARCH} in
		i*86)
			SCANNER_DRV_DEB=$(wget -q ${SCANNER_INFO} -O - | grep DEB32 | cut -d\= -f2)
			SCANKEY_DRV_DEB=$(wget -q ${SCANKEY_INFO} -O - | grep DEB32 | cut -d\= -f2)
		;;
		x86_64)
			SCANNER_DRV_DEB=$(wget -q ${SCANNER_INFO} -O - | grep DEB64 | cut -d\= -f2)
			SCANKEY_DRV_DEB=$(wget -q ${SCANKEY_INFO} -O - | grep DEB64 | cut -d\= -f2)
		;;
		*)
			echo "Architecture inconnue: ${ARCH}" &>> ${LOGFILE}
		;;
	esac
	# On ajoute la liste des pilotes trouvés au fichier de journalisation
	for PKG in ${PRINTER_LPD_DEB} ${PRINTER_CUPS_DEB} ${PRINTER_DRV_DEB} ${SCANNER_DRV_DEB} ${SCANKEY_DRV_DEB}; do
		if [[ ! -z ${PKG} ]]; then
			echo " - Paquet trouvé : ${PKG}" &>> ${LOGFILE}
		fi
	done
	log_action_end_msg 0
	# On crée le dossier de téléchargement des paquets
	if [[ ! -d ${TEMP_DIR} ]]; then
		mkdir ${TEMP_DIR}
	fi
	# On télécharge les pilotes trouvés
	for PKG in ${PRINTER_LPD_DEB} ${PRINTER_CUPS_DEB} ${PRINTER_DRV_DEB} ${SCANNER_DRV_DEB} ${SCANKEY_DRV_DEB}; do
		URL_DEB="${URL_PKG}/${PKG}"
		echo &>> ${LOGFILE}
		echo "# Téléchargement du paquet : ${PKG}" &>> ${LOGFILE}
		log_action_begin_msg "Téléchargement du paquet : ${PKG}"
		wget -cP ${TEMP_DIR} "${URL_DEB}" &>> ${LOGFILE}
		log_action_end_msg $?
	done
	# On télécharge le fichier pour udev pour les scanners
	if [[ ! -z ${SCANNER_DRV_DEB} ]]; then
		echo "# Téléchargement du paquet : brother-udev-rule-type1-1.0.0-1.all.deb" &>> ${LOGFILE}
		log_action_begin_msg "Téléchargement du paquet : ${UDEV_DEB}"
		wget -cP ${TEMP_DIR} "${UDEV_DEB_URL}" &>> ${LOGFILE}
		log_action_end_msg $?
	fi
}

###############################
# VERIFICATION DES PRÉ-REQUIS #
###############################
function do_check_prerequisites() {
	echo -e ${BLUE}"Vérification des pré-requis"${RESETCOLOR}
	echo "# Vérification des pré-requis" &>> ${LOGFILE}
	log_action_begin_msg "Mise à jour de la liste des paquets"
	apt-get update -qq
	log_action_end_msg $?
	# On vérifie que le paquet multiarch-support est installé et on l'installe le cas échéant (Ubuntu 64-bits seulement)
	if [[ "${ARCH}" == "x86_64" ]]; then
		log_action_begin_msg "Recherche du paquet 'multiarch-support' sur votre système"
		if dpkg -s multiarch-support &>/dev/null; then
			log_action_end_msg $?
			echo " - Paquet 'multiarch-support' installé" &>> ${LOGFILE}
		else
			log_action_end_msg 1
			echo " - Paquet 'multiarch-support' non installé" &>> ${LOGFILE}
			log_action_begin_msg "Installation du paquet 'multiarch-support'"
			echo "# Installation de 'multiarch-support'" &>> ${LOGFILE}
			apt-get install -qq multiarch-support &>> ${LOGFILE}
			log_action_end_msg $?
			echo " - Paquet 'multiarch-support' installé" &>> ${LOGFILE}
		fi
		log_action_begin_msg "Recherche du paquet 'lib32stdc++6' sur votre système"
		if dpkg -s lib32stdc++6 &>/dev/null; then
			log_action_end_msg $?
			echo " - Paquet 'lib32stdc++6' installé" &>> ${LOGFILE}
		else
			log_action_end_msg 1
			echo " - Paquet 'lib32stdc++6' non installé" &>> ${LOGFILE}
			log_action_begin_msg "Installation du paquet 'lib32stdc++6'"
			echo "# Installation de 'lib32stdc++6'" &>> ${LOGFILE}
			apt-get install -qq lib32stdc++6 &>> ${LOGFILE}
			log_action_end_msg $?
			echo " - Paquet 'lib32stdc++6' installé" &>> ${LOGFILE}
		fi
	fi
	# On vérifie que le paquet cups est installé et on l'installe le cas échéant
	log_action_begin_msg "Recherche du paquet 'cups' sur votre système"
	if dpkg -s cups &>/dev/null; then
		log_action_end_msg $?
		echo " - Paquet 'cups' installé" &>> ${LOGFILE}
	else
		log_action_end_msg 1
		log_action_begin_msg "Installation du paquet 'cups'"
		echo "# Installation de 'cups'" &>> ${LOGFILE}
		apt-get install -qq cups &>> ${LOGFILE}
		log_action_end_msg $?
		echo " - Paquet 'cups' installé" &>> ${LOGFILE}
	fi
	# Si un pilote pour le scanner a été trouvé on vérifie que sane-utils est installé
	if [[ ! -z ${SCANNER_DEB} ]]; then
		log_action_begin_msg "Recherche du paquet 'sane-utils' sur votre système"
		if dpkg -s sane-utils &>/dev/null; then
			log_action_end_msg $?
			echo " - Paquet 'sane-utils' installé" &>> ${LOGFILE}
		else
			log_action_end_msg 1
			echo " - Paquet 'sane-utils' non installé" &>> ${LOGFILE}
			log_action_begin_msg "Installation du paquet 'sane-utils'"
			echo "# Installation de 'sane-utils'" &>> ${LOGFILE}
			apt-get install -qq sane-utils &>> ${LOGFILE}
			log_action_end_msg $?
			echo " - Paquet 'sane-utils' installé" &>> ${LOGFILE}
		fi
		# On vérifie que libusb-0.1-4:i386 est installé
		if [[ ${CONNECTION} == "USB" ]]; then
			log_action_begin_msg "Recherche du paquet 'libusb-0.1-4' sur votre système"
			if dpkg -s libusb-0.1-4 &>/dev/null; then
				log_action_end_msg $?
				echo " - Paquet 'libusb-0.1-4' installé" &>> ${LOGFILE}
			else
				log_action_end_msg 1
				echo " - Paquet 'libusb-0.1-4' non installé" &>> ${LOGFILE}
				log_action_begin_msg "Installation du paquet 'libusb-0.1-4'"
				echo "# Installation de 'libusb-0.1-4'" &>> ${LOGFILE}
				apt-get install -qq libusb-0.1-4 &>> ${LOGFILE}
				log_action_end_msg $?
				echo " - Paquet 'libusb-0.1-4' installé" &>> ${LOGFILE}
			fi
		fi
	fi
	# On vérifie que le paquet csh est installé et on l'installe le cas échéant (uniquement pour certaines imprimantes)
	for i in DCP-110C DCP-115C DCP-117C DCP-120C DCP-310CN DCP-315CN DCP-340CW FAX-1815C FAX-1820C FAX-1835C FAX-1840C FAX-1920CN FAX-1940CN FAX-2440C MFC-210C MFC-215C MFC-3220C MFC-3240C MFC-3320CN MFC-3340CN MFC-3420C MFC-3820CN MFC-410CN MFC-420CN MFC-425CN MFC-5440CN MFC-5840CN MFC-620CN MFC-640CW MFC-820CW; do
		if [[ ${MODEL_NAME} == "$i" ]]; then
			log_action_begin_msg "Recherche du paquet 'csh' sur votre système"
			if [[ ! -x /bin/csh ]]; then
				log_action_end_msg 1
				log_action_begin_msg "Installation du paquet 'csh'"
				echo "# Installation du paquet 'csh'" &>> ${LOGFILE}
				apt-get install -qq csh &>> ${LOGFILE}
				log_action_end_msg $?
				echo " - Paquet 'csh' installé" &>> ${LOGFILE}
			else
				log_action_end_msg $?
			fi
		fi
	done
	# On vérifie que le dossier /usr/share/cups/model existe et on le crée le cas échéant
	log_action_begin_msg "Recherche du dossier '/usr/share/cups/model' sur votre système"
	if [[ -d /usr/share/cups/model ]]; then
		log_action_end_msg $?
	else
		log_action_end_msg 1
		log_action_begin_msg "Creation du dossier '/usr/share/cups/model'"
		mkdir -p /usr/share/cups/model
		log_action_end_msg $?
	fi
	# On vérifie que le dossier /var/spool/lpd existe et on le crée le cas échéant
	log_action_begin_msg "Recherche du dossier '/var/spool/lpd' sur votre système"
	if [[ -d /var/spool/lpd ]]; then
		log_action_end_msg $?
	else
		log_action_end_msg 1
		log_action_begin_msg "Creation du dossier '/var/spool/lpd'"
		mkdir -p /var/spool/lpd
		log_action_end_msg $?
	fi
	# On vérifie que le lien symbolique /etc/init.d/lpd existe et on le crée le cas échéant (uniquement pour certaines imprimantes)
	for i in DCP-1000 DCP-1400 DCP-8020 DCP-8025D DCP-8040 DCP-8045D DCP-8060 DCP-8065DN FAX-2850 FAX-2900 FAX-3800 FAX-4100 FAX-4750e FAX-5750e HL-1030 HL-1230 HL-1240 HL-1250 HL-1270N HL-1430 HL-1440 HL-1450 HL-1470N HL-1650 HL-1670N HL-1850 HL-1870N HL-5030 HL-5040 HL-5050 HL-5070N HL-5130 HL-5140 HL-5150D HL-5170DN HL-5240 HL-5250DN HL-5270DN HL-5280DW HL-6050 HL-6050D MFC-4800 MFC-6800 MFC-8420 MFC-8440 MFC-8460N MFC-8500 MFC-8660DN MFC-8820D MFC-8840D MFC-8860DN MFC-8870DW MFC-9030 MFC-9070 MFC-9160 MFC-9180 MFC-9420CN MFC-9660 MFC-9700 MFC-9760 MFC-9800 MFC-9860 MFC-9880; do
		if [[ ${MODEL_NAME} == "$i" ]]; then
			log_action_begin_msg "Recherche du lien symbolique '/etc/init.d/lpd ~> /etc/init.d/cups' sur votre système"
			if [[ -L /etc/init.d/lpd ]]; then
				log_action_end_msg 0
			else
				log_action_end_msg 1
				log_action_begin_msg "Creation du lien symbolique '/etc/init.d/lpd ~> /etc/init.d/cups'"
				ln -s /etc/init.d/cups /etc/init.d/lpd
				# On crée un lien symbolique vers cups.service si systemd est utilisé
				if [[ -L /sbin/init ]]; then
					ln -s /lib/systemd/system/cups.service /lib/systemd/system/lpd.service
					systemd-daemon reload
				fi
				log_action_end_msg $?
			fi
		fi
	done
}

############################
# INSTALLATION DES PAQUETS #
############################
function do_install_drivers() {
	echo -e ${BLUE}"Installation des pilotes"${RESETCOLOR}
	for PKG in ${PRINTER_LPD_DEB} ${PRINTER_CUPS_DEB} ${PRINTER_DRV_DEB} ${SCANNER_DRV_DEB} ${SCANKEY_DRV_DEB}; do
		log_action_begin_msg "Installation du paquet : ${PKG}"
		echo &>> ${LOGFILE}
		echo "# Installation du paquet : ${PKG}" &>> ${LOGFILE}
		dpkg -i --force-all "${TEMP_DIR}/${PKG}" &>> ${LOGFILE}
		log_action_end_msg $?
	done
	if [[ ! -z ${SCANNER_DRV_DEB} ]]; then
		log_action_begin_msg "Installation du paquet : ${UDEV_DEB}"
		echo &>> ${LOGFILE}
		echo "# Installation du paquet : ${UDEV_DEB}" &>> ${LOGFILE}
		dpkg -i --force-all "${TEMP_DIR}/${UDEV_DEB}" &>> ${LOGFILE}
		log_action_end_msg $?
	fi
}

#################################
# CONFIGURATION DE L'IMPRIMANTE #
#################################
function do_configure_printer() {
	echo -e ${BLUE}"Configuration de l'imprimante"${RESETCOLOR}
	# On recherche un fichier ppd
	log_action_begin_msg "Recherche d'un fichier PPD sur votre système"
	echo &>> ${LOGFILE}
	echo "# Recherche d'un fichier PPD" &>> ${LOGFILE}
	for PKG in ${PRINTER_CUPS_DEB} ${PRINTER_DRV_DEB}; do
		PPD_FILE=$(dpkg --contents ${TEMP_DIR}/${PKG} | grep ppd | awk '{print $6}' | sed 's/^.//g')
	done
	if [[ -z "${PPD_FILE}" ]]; then
		for FILE in $(find /usr/share/cups/model -type f); do
			if [[ $(grep -i Brother ${FILE} | grep -E "(${MODEL_NAME}|${PRINTER_NAME})") ]]; then
				PPD_FILE=${FILE}
			fi
		done
	fi
	echo " - Fichier PPD : ${PPD_FILE}" &>> ${LOGFILE}
	log_action_end_msg 0
	# On ajoute une nouvelle imprimante
	log_action_begin_msg "Ajout de l'imprimante ${MODEL_NAME}"
	echo &>> ${LOGFILE}
	echo "# Ajout de l'imprimante ${MODEL_NAME}" &>> ${LOGFILE}
	echo " - Backup du fichier /etc/cups/printers.conf.O" &>> ${LOGFILE}
	cp /etc/cups/printers.conf.O ${DIR} &>> ${LOGFILE}
	echo " - Arret du service CUPS" &>> ${LOGFILE}
	systemctl stop cups &>> ${LOGFILE}
	echo " - Restauration du fichier printers.conf" &>> ${LOGFILE}
	cp ${DIR}/printers.conf.O /etc/cups/printers.conf &>> ${LOGFILE}
	echo " - Redémarrage du service CUPS" &>> ${LOGFILE}
	systemctl restart cups &>> ${LOGFILE}
	case ${CONNECTION} in
	"USB")
		sleep 2 && lpadmin -p "${MODEL_NAME}" -E -v usb://dev/usb/lp0 -P "${PPD_FILE}"
	;;
	"Réseau")
		sleep 2 && lpadmin -p "${MODEL_NAME}" -E -v lpd://"${IP}"/binary_p1 -P "${PPD_FILE}"
	;;
	esac
	log_action_end_msg $?
	echo " - Restauration du fichier printers.conf.O" &>> ${LOGFILE}
	cp ${DIR}/printers.conf.O /etc/cups/printers.conf.O &>> ${LOGFILE}
}

############################
# CONFIGURATION DU SCANNER #
############################
function do_configure_scanner() {
	if [[ ! -z ${SCANNER_DEB} ]]; then
		echo -e ${BLUE}"Configuration du scanner"${RESETCOLOR}
		echo &>> ${LOGFILE}
		echo "# Configuration du scanner" &>> ${LOGFILE}
		if [[ ${CONNECTION} == "USB" ]]; then
			# Installation du paquet brother-udev
			dpkg -i --force-all "${TEMP_DIR}/brother-udev-rule-type1-1.0.0-1.all.deb" &>> ${LOGFILE}
			# On ajoute une entrée au fichier udev
			if [[ ! $(grep 'ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"' ${UDEV_RULES}) ]]; then
				echo 'Adding ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes" to ${UDEV_RULES}' &>> ${LOGFILE}
				sed -i '/LABEL="libsane_usb_rules_begin"/a\
				\n# Brother\nATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"' ${UDEV_RULES}
			else
				echo "Règle udev trouvée dans le fichier ${UDEV_RULES}" &>> ${LOGFILE}
			fi
			# On recharge les règles udev
			udevadm control --reload
		elif [[ ${CONNECTION} == "Réseau" ]]; then
			log_action_begin_msg "Configuration du scanner réseau"
			if [[ -x /usr/bin/brsaneconfig ]]; then
				brsaneconfig -a name="SCANNER" model="${MODEL_NAME}" ip="${IP}" &>> ${LOGFILE}
			elif [[ -x /usr/bin/brsaneconfig2 ]]; then
				brsaneconfig2 -a name="SCANNER" model="${MODEL_NAME}" ip="${IP}" &>> ${LOGFILE}
			elif [[ -x /usr/bin/brsaneconfig3 ]]; then
				brsaneconfig3 -a name="SCANNER" model="${MODEL_NAME}" ip="${IP}" &>> ${LOGFILE}
			elif [[ -x /usr/bin/brsaneconfig4 ]]; then
				sed -i '/Support Model/a\
0x029a, 117, 1, "MFC-8690DW", 133, 4\
0x0279, 14, 2, "DCP-J525W"\
0x027b, 13, 2, "DCP-J725DW"\
0x027d, 13, 2, "DCP-J925DW"\
0x027f, 14, 1, "MFC-J280W"\
0x028f, 13, 1, "MFC-J425W"\
0x0281, 13, 1, "MFC-J430W"\
0x0280, 13, 1, "MFC-J435W"\
0x0282, 13, 1, "MFC-J625DW"\
0x0283, 13, 1, "MFC-J825DW"\
0x028d, 13, 1, "MFC-J835DW"' /opt/brother/scanner/brscan4/Brsane4.ini
				brsaneconfig4 -a name=SCANNER model=${MODEL_NAME} ip=${IP} &>> ${LOGFILE}
			fi
			log_action_end_msg $?
		fi
		# On copie les librairies
		if [[ ${ARCH} == "x86_64" ]] && [[ -d ${LIB_DIR} ]]; then
			log_action_begin_msg "Copie des librairies nécessaires"
			if [[ -e /usr/bin/brsaneconfig ]]; then
				cd ${LIB_DIR}
				cp --force /usr/lib64/libbrcolm.so.1.0.1 .
				ln -sf libbrcolm.so.1.0.1 libbrcolm.so.1
				ln -sf libbrcolm.so.1 libbrcolm.so
				cp --force /usr/lib64/libbrscandec.so.1.0.0 ${LIB_DIR}
				ln -sf libbrscandec.so.1.0.0 libbrscandec.so.1
				ln -sf libbrscandec.so.1 libbrscandec.so
				cd ${LIB_DIR}/sane
				cp --force /usr/lib64/sane/libsane-brother.so.1.0.7 .
				ln -sf libsane-brother.so.1.0.7 libsane-brother.so.1
				ln -sf libsane-brother.so.1 libsane-brother.so
				log_action_end_msg 0
			elif [[ -e /usr/bin/brsaneconfig2 ]]; then
				cd ${LIB_DIR}
				cp --force /usr/lib64/libbrscandec2.so.1.0.0 .
				ln -sf libbrscandec2.so.1.0.0 libbrscandec2.so.1
				ln -sf libbrscandec2.so.1 libbrscandec2.so
				cp --force /usr/lib64/libbrcolm2.so.1.0.1 .
				ln -sf libbrcolm2.so.1.0.1 libbrcolm2.so.1
				ln -sf libbrcolm2.so.1 libbrcolm2.so
				cd ${LIB_DIR}/sane
				cp --force /usr/lib64/sane/libsane-brother2.so.1.0.7 .
				ln -sf libsane-brother2.so.1.0.7 libsane-brother2.so.1
				ln -sf libsane-brother2.so.1 libsane-brother2.so
				log_action_end_msg 0
			elif [[ -e /usr/bin/brsaneconfig3 ]]; then
				cd ${LIB_DIR}
				cp --force /usr/lib64/libbrscandec3.so.1.0.0 .
				ln -sf libbrscandec3.so.1.0.0 libbrscandec3.so.1
				ln -sf libbrscandec3.so.1 libbrscandec3.so
				cd ${LIB_DIR}/sane
				cp --force /usr/lib64/sane/libsane-brother3.so.1.0.7 .
				ln -sf libsane-brother3.so.1.0.7 libsane-brother3.so.1
				ln -sf libsane-brother3.so.1 libsane-brother3.so
				log_action_end_msg 0
			elif [[ -e /usr/bin/brsaneconfig4 ]]; then
				cd ${LIB_DIR}/sane
				cp --force /usr/lib64/sane/libsane-brother4.so.1.0.7 .
				ln -sf libsane-brother4.so.1.0.7 libsane-brother4.so.1
				ln -sf libsane-brother4.so.1 libsane-brother4.so
				log_action_end_msg 0
			else
				log_action_end_msg 1
				echo -e ${RED}"No config binary found."${RESETCOLOR}
			fi
		fi
	fi
}

#################
# FIN DU SCRIPT #
#################
function do_clean() {
	# On supprime le fichier printers.conf.O
	if [[ -e ${DIR}/printers.conf.O ]]; then
		rm ${DIR}/printers.conf.O &>> ${LOGFILE}
	fi
	# On réattribue les droits des dossiers/fichiers crées à l'utilisateur
	chown -R ${USER}: ${TEMP_DIR} ${LOGFILE}
	exit 0
}

do_init_script
do_download_drivers
do_check_prerequisites
do_install_drivers
do_configure_printer
do_configure_scanner
do_clean
do_configure_scanner
do_clean

Merci pour votre aide

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#8 Le 27/05/2021, à 14:15

xubu1957

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour,

Dans son tutoriel, sylvain3800 a écrit :

si tu as une BROTHER

dpkg -l | grep -i brother

Pour nettoyer :

Le 11/02/2017, moko138 a écrit :

Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :

dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P

Dernière modification par xubu1957 (Le 27/05/2021, à 14:16)

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#9 Le 27/05/2021, à 17:35

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour xubu 957

laurent@laurent-Inspiron-3505:~$ dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
[sudo] Mot de passe de laurent : 
(Lecture de la base de données... 202674 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de gnome-software (3.36.1-0ubuntu0.20.04.0) ...
Purge des fichiers de configuration de libpython3.6-minimal:amd64 (3.6.9-1~18.04ubuntu1.4) ...
Purge des fichiers de configuration de libsensors4:amd64 (1:3.4.0-4) ...
Purge des fichiers de configuration de libssl1.0.0:amd64 (1.0.2n-1ubuntu5.6) ...
Purge des fichiers de configuration de linux-image-4.15.0-29-generic (4.15.0-29.31) ...
Purge des fichiers de configuration de linux-modules-4.15.0-29-generic (4.15.0-29.31) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-29-generic (4.15.0-29.31) ...
Purge des fichiers de configuration de python (2.7.15~rc1-1) ...
Purge des fichiers de configuration de python3.6-minimal (3.6.9-1~18.04ubuntu1.4) ...
Purge des fichiers de configuration de ureadahead (0.100.0-21) ...
laurent@laurent-Inspiron-3505:~$

Je ne sais pas si j'ai bien fait de procéder à la purge en premier,  mais ça me semble logique.

laurent@laurent-Inspiron-3505:~$ dpkg -l | grep -i brother
ii  printer-driver-brlaser                     6-1build1                             amd64        printer driver for (some) Brother laser printers
ii  printer-driver-ptouch                      1.4.2-3                               amd64        printer driver Brother P-touch label printers
laurent@laurent-Inspiron-3505:~$

J'ai testé l'imprimante qui me renvoie le message : impossible de démarrer l'imprimante , revoir la configuration.

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#10 Le 27/05/2021, à 17:44

xubu1957

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

L'imprimante est-elle branchée en USB ?

Est-elle allumée ?

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#11 Le 27/05/2021, à 19:40

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Oui elle est branchée , allumée

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#12 Le 27/05/2021, à 19:42

xubu1957

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Branchée sur un port USB de l'ordi ou sur un Hub ?

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#13 Le 27/05/2021, à 21:01

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

branchée sur port usb

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#14 Le 27/05/2021, à 21:05

xubu1957

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Un port USB2 ?

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#15 Le 27/05/2021, à 22:04

eric63

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

pour ma part tu n‘as pas donné le retour du fichier brprinter-installer.log demandé mais celui du script brprinter-installer qui est le script de lancement
donc donne le retour du fichier brprinter-installer.log

Kubuntu 24.10  Wayland Plasma 6.1.5 KDE 6.6.0 Qt 6.6.2 et noyau 6.11.0-9  Asus B760+D4  i5-12400F 4.4Ghz DDR4 32Go nvidia RTX 3060 12GB
Utilisez les drivers libres avant d’ installer une brother avec le script de demonipuch
J’utilise le clavier french AFNOR

Hors ligne

#16 Le 28/05/2021, à 09:32

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour Eric 63 ,
je ne trouve pas brprinter-installer.log

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#17 Le 28/05/2021, à 09:38

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour xubu 957,
Je crois que c'est un port usb3 , il est bleu.

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#18 Le 28/05/2021, à 11:27

eric63

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

je ne trouve pas brprinter-installer.log

ça veut dire que ton script n’a pas démarré sinon il aurait laissé une trace
est ce que tu peux refaire ce script r(egarde dans mon profil pour le lien des commandes prescrites)
suivant les recommandations du post de demonipuch et pas juste en lancant le script
et nous copier pas à pas les commandes que tu emploies dans le terminal et les retours des commandes
il vaut mieux mettre l'imprimante sur un port ubs2 (blanc)

Kubuntu 24.10  Wayland Plasma 6.1.5 KDE 6.6.0 Qt 6.6.2 et noyau 6.11.0-9  Asus B760+D4  i5-12400F 4.4Ghz DDR4 32Go nvidia RTX 3060 12GB
Utilisez les drivers libres avant d’ installer une brother avec le script de demonipuch
J’utilise le clavier french AFNOR

Hors ligne

#19 Le 28/05/2021, à 15:20

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Le retour pour le script 

laurent@laurent-Inspiron-3505:~$ wget https://bitbucket.org/demonipuch/brprinter-installer/get/master.zip
--2021-05-28 16:12:38--  https://bitbucket.org/demonipuch/brprinter-installer/get/master.zip
Résolution de bitbucket.org (bitbucket.org)… 2406:da00:ff00::22c2:513, 2406:da00:ff00::6b17:d1f5, 2406:da00:ff00::22c3:9b0a, ...
Connexion à bitbucket.org (bitbucket.org)|2406:da00:ff00::22c2:513|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 5475 (5,3K) [application/zip]
Enregistre : «master.zip.1»

master.zip.1        100%[===================>]   5,35K  --.-KB/s    ds 0s      

2021-05-28 16:12:40 (760 MB/s) - «master.zip.1» enregistré [5475/5475]

laurent@laurent-Inspiron-3505:~$ unzip master.zip
Archive:  master.zip
6e4cce8c163b04b0896286f6a76352a675505732
replace demonipuch-brprinter-installer-6e4cce8c163b/.gitignore? [y]es, [n]o, [A]ll, [N]one, [r]ename: y
 extracting: demonipuch-brprinter-installer-6e4cce8c163b/.gitignore  
replace demonipuch-brprinter-installer-6e4cce8c163b/brprinter-installer? [y]es, [n]o, [A]ll, [N]one, [r]ename: y
  inflating: demonipuch-brprinter-installer-6e4cce8c163b/brprinter-installer  
laurent@laurent-Inspiron-3505:~$ cd demonipuch-brprinter-installer-*
laurent@laurent-Inspiron-3505:~/demonipuch-brprinter-installer-6e4cce8c163b$ sudo bash brprinter-installer 
[sudo] Mot de passe de laurent : 
Entrez votre modèle : DCP-195C
Sélectionner le type de connectivité : [0] USB - [1] Réseau
Entrez votre choix : 0
Téléchargement des pilotes de l'imprimante
 * Recherche des pilotes...                                              [ OK ] 
 * Téléchargement du paquet : dcp195clpr-1.1.3-1.i386.deb...             [ OK ] 
 * Téléchargement du paquet : dcp195ccupswrapper-1.1.3-1.i386.deb...     [ OK ] 
 * Téléchargement du paquet : brscan3-0.2.13-1.amd64.deb...              [ OK ] 
 * Téléchargement du paquet : brscan-skey-0.3.1-2.amd64.deb...           [ OK ] 
 * Téléchargement du paquet : brother-udev-rule-type1-1.0.0-1.all.deb... [ OK ] 
Vérification des pré-requis
 * Mise à jour de la liste des paquets...                                [ OK ] 
 * Recherche du paquet 'multiarch-support' sur votre système...          [ OK ] 
 * Recherche du paquet 'lib32stdc++6' sur votre système...               [fail] 
 * Installation du paquet 'lib32stdc++6'...                              [ OK ] 
 * Recherche du paquet 'cups' sur votre système...                       [ OK ] 
 * Recherche du paquet 'sane-utils' sur votre système...                 [ OK ] 
 * Recherche du paquet 'libusb-0.1-4' sur votre système...               [fail] 
 * Installation du paquet 'libusb-0.1-4'...                              [ OK ] 
 * Recherche du dossier '/usr/share/cups/model' sur votre système...     [ OK ] 
 * Recherche du dossier '/var/spool/lpd' sur votre système...            [fail] 
 * Creation du dossier '/var/spool/lpd'...                               [ OK ] 
Installation des pilotes
 * Installation du paquet : dcp195clpr-1.1.3-1.i386.deb...               [ OK ] 
 * Installation du paquet : dcp195ccupswrapper-1.1.3-1.i386.deb...       [ OK ] 
 * Installation du paquet : brscan3-0.2.13-1.amd64.deb...                [ OK ] 
 * Installation du paquet : brscan-skey-0.3.1-2.amd64.deb...             [ OK ] 
 * Installation du paquet : brother-udev-rule-type1-1.0.0-1.all.deb...   [ OK ] 
Configuration de l'imprimante
 * Recherche d'un fichier PPD sur votre système...                       [ OK ] 
 * Ajout de l'imprimante DCP-195C...                                            lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS.
                                                                         [ OK ]
Configuration du scanner
grep: /lib/udev/rules.d/60-libsane1.rules: Aucun fichier ou dossier de ce type
sed: impossible de lire /lib/udev/rules.d/60-libsane1.rules: Aucun fichier ou dossier de ce type
 * Copie des librairies nécessaires...                                   [ OK ] 
laurent@laurent-Inspiron-3505:~/demonipuch-brprinter-installer-6e4cce8c163b$

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#20 Le 28/05/2021, à 15:52

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Après le script, l'imprimante ne reçoit plus de données du pc et n'imprime toujours pas.

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#21 Le 28/05/2021, à 16:50

ylag

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour,

Sous réserve de l'avis de @eric63, le retour au #19 semble indiquer que les pilotes se sont correctement installés.

Je tenterais la suppression du paquet ippusbxd :

sudo apt purge ippusbxd

...redémarrer, puis débrancher et rebrancher l'imprimante ?

A+

Dernière modification par ylag (Le 28/05/2021, à 16:58)

Hors ligne

#22 Le 28/05/2021, à 19:11

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Merci Ylag
ça fonctionne !  après Redémarrage .

Je teste le scanner ,  c'est bon. smile

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#23 Le 28/05/2021, à 19:16

Chveïk2

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Comment indiquer que le problème est résolu ?

Patience et longueur de temps font plus que rage ni que grogne. Surtout avec un pc.

Hors ligne

#24 Le 28/05/2021, à 19:36

xubu1957

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Bonjour,

Pour éditer ta discussion et rajouter [Résolu], au début du titre et le nom de l'imprimante Brother DCP 95C, il faut utiliser le bouton Modifier au bas de ton premier message.

Merci. wink

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#25 Le 28/05/2021, à 20:17

eric63

Re : [Résolu] Imprimante Brother DCP 95C qui n'imprime rien

Super,
en plus avec le brscan3 c’est un peu la roulette russe pour un bon fonctionnement
le paquet ippusbxd n’est peut être pas innocent dans l’affaire

Kubuntu 24.10  Wayland Plasma 6.1.5 KDE 6.6.0 Qt 6.6.2 et noyau 6.11.0-9  Asus B760+D4  i5-12400F 4.4Ghz DDR4 32Go nvidia RTX 3060 12GB
Utilisez les drivers libres avant d’ installer une brother avec le script de demonipuch
J’utilise le clavier french AFNOR

Hors ligne

Pages : 1