#1 Le 21/02/2022, à 18:59
- dedepapa
(Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Bonjour,
Alors la je sèche. J'utilisais depuis pas mal de temps "Ajustment" pour configurer ma 20.04 LTS et aujourd'hui ou je veux vérifier quelque chose impossible de le lancer.
J'ai essayer avec l’icône de lancement ou le terminal en tapant "gnome-tweaks" et rien ne se passe. J'ai désinstallé et réinstallé rien non plus.
Pouvez vous m'aider?
Merci d'avance
Dernière modification par dedepapa (Le 22/02/2022, à 14:50)
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#2 Le 21/02/2022, à 19:18
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Quand tu lances gnome-tweaks depuis un terminal, tu n'as absolument aucun retour ?
Hors ligne
#3 Le 21/02/2022, à 19:26
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Et non c'est pour ça que je n'y comprend rien.
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#4 Le 21/02/2022, à 19:32
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Avec le chemin complet, c'est pareil ?
/usr/bin/gnome-tweaks
Si tu le supprimes en purgeant les fichiers et que tu le réinstalles, idem ?
sudo apt-get remove --purge gnome-tweaks
sudo apt-get install gnome-tweaks
Hors ligne
#5 Le 21/02/2022, à 19:40
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Avec le chemin complet c'est pareil. Ça revient au curseur qui clignote.
Quand j'ai désinstallé et réinstallé j'ai fait exactement ce que tu proposes et même résultat.
Je viens de le refaire et rien.
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#6 Le 21/02/2022, à 19:48
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Tu n'es pas sur un terminal root ou un contexte un peu spécial du même style ?
À out hasard, que donne le retour de la commande suivante ?
ldd /usr/bin/gnome-tweaks
Ça va lister les biblis utilisées par le binaire, pour voir s'il y a des trucs inhabituels.
D'autre part, donne aussi le retour de :
apt list | grep "installé, local"
Et à part ça, depuis que tu as remarqué qu'il ne se lançait plus, est-ce que tu as essayé de redémarrer ? Il n'y aurait pas un processus gnome-tweaks planté en train de tourner ?
ps -A | grep tweaks
Hors ligne
#7 Le 21/02/2022, à 20:03
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
La première commande
dede@dede-Inspiron-5570:~$ ldd /usr/bin/gnome-tweaks
n'est pas un exécutable dynamique
Ça parait bizarre la réponse n'est pas un exécutable. Non?
La deuxième
dede@dede-Inspiron-5570:~$ apt list | grep "installé, local"
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
conky-manager-extra/now 1.0.0~focal all [installé, local]
conky-manager/now 2.4-1~136~ppa~focal3 amd64 [installé, local]
realpath/now 8.28-lmtrfocal all [installé, local]
secureboot-db/now 1.6~20.04.1 amd64 [installé, local]
La troisième
dede@dede-Inspiron-5570:~$ ps -A | grep tweaks
3789 ? 00:00:01 gnome-tweaks
Oui j'ai redémarré et je suis allé voir dans les processus actif. J'ai trouvé "gnome tweaks"
L'état est indiqué "au repos"
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#8 Le 21/02/2022, à 20:07
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Pour la première commande, c'est pas forcément anormal mais ça ne nous avance pas.
Essaie de tuer le processus de Tweaks et de le relancer. Si le retour de la dernière commande vient d'être fait, c'est le pID 3789 mais si tu as redémarré entre temps, relance-la pour connaître le bon et adapter :
kill -9 3789
gnome-tweaks
Est-ce qu'il se lance ?
D'autre part, c'est a priori indépendant du problème mais tu utilises ce conky-manager qui est installé sans dépôt associé ?
Hors ligne
#9 Le 21/02/2022, à 20:12
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
La dernière commande ne me rend pas la main.
dede@dede-Inspiron-5570:~$ gnome-tweaks
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:27:35: Junk at end of value for background-color
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:40:48: Junk at end of value for background-color
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:48:46: Junk at end of value for background-color
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:59:58: Junk at end of value for background-color
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:66:28: The :prelight pseudo-class is deprecated. Use :hover instead.
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:70:46: Junk at end of value for background-color
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:77:35: The :prelight pseudo-class is deprecated. Use :hover instead.
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:81:58: Junk at end of value for background-color
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:123:31: The :insensitive pseudo-class is deprecated. Use :disabled instead.
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:124:24: The :insensitive pseudo-class is deprecated. Use :disabled instead.
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:156:27: The :insensitive pseudo-class is deprecated. Use :disabled instead.
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:157:29: The :insensitive pseudo-class is deprecated. Use :disabled instead.
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:177:34: The :insensitive pseudo-class is deprecated. Use :disabled instead.
(gnome-tweaks:22304): Gtk-WARNING **: 19:10:30.743: Theme parsing error: gtk.css:199:34: The :inconsistent pseudo-class is deprecated. Use :indeterminate instead.
WARNING : Error loading desktopfile: /home/dede/.config/autostart/gnome-sound-applet.desktop
WARNING : Error loading desktopfile: /home/dede/.config/autostart/smart-notifier.desktop
WARNING : Error loading desktopfile: /home/dede/.config/autostart/indicator-application.desktop
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/gtweak/app.py", line 30, in do_activate
self.win = Window(self, model)
File "/usr/lib/python3/dist-packages/gtweak/tweakview.py", line 58, in __init__
self._model.load_tweaks(self)
File "/usr/lib/python3/dist-packages/gtweak/tweakmodel.py", line 107, in load_tweaks
mods = __import__("gtweak.tweaks", globals(), locals(), tweak_files, 0)
File "/usr/lib/python3/dist-packages/gtweak/tweaks/tweak_group_startup.py", line 350, in <module>
AutostartListBoxTweakGroup(),
File "/usr/lib/python3/dist-packages/gtweak/tweaks/tweak_group_startup.py", line 293, in __init__
if not AutostartFile(df).is_start_at_login_enabled():
File "/usr/lib/python3/dist-packages/gtweak/utils.py", line 192, in is_start_at_login_enabled
return open(self._user_autostart_file).read().find("X-GNOME-Autostart-enabled=false") == -1
File "/usr/lib/python3.8/codecs.py", line 322, in decode
(result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xe9 in position 71: invalid continuation byte
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#10 Le 21/02/2022, à 20:15
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Tu peux faire ctrl + C pour l'interrompre.
Il y a potentiellement des problèmes en rapport avec Python, on va voir si tu n'aurais pas des dépôts en rapport avec :
cat /etc/apt/sources.list
ls /etc/apt/sources.list.d
cat /etc/apt/sources.list.d/*.list
Et tu ne m'as pas répondu pour conky-manager : c'est quelque chose que tu utilises ?
Hors ligne
#11 Le 21/02/2022, à 20:21
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
1
dede@dede-Inspiron-5570:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 20.04.1 LTS _Focal Fossa_ - Release amd64 (20200731)]/ focal main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ focal main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ focal-updates main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ focal universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal universe
deb http://fr.archive.ubuntu.com/ubuntu/ focal-updates universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ focal multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ focal-updates multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal-backports main restricted universe multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu focal partner
# deb-src http://archive.canonical.com/ubuntu focal partner
deb http://security.ubuntu.com/ubuntu focal-security main restricted
# deb-src http://security.ubuntu.com/ubuntu focal-security main restricted
deb http://security.ubuntu.com/ubuntu focal-security universe
# deb-src http://security.ubuntu.com/ubuntu focal-security universe
deb http://security.ubuntu.com/ubuntu focal-security multiverse
# deb-src http://security.ubuntu.com/ubuntu focal-security multiverse
# This system was installed using small removable media
# (e.g. netinst, live or single CD). The matching "deb cdrom"
# entries were disabled at the end of the installation process.
# For information about how to configure apt package sources,
# see the sources.list(5) manual.
deb http://fr.archive.ubuntu.com/ubuntu/ focal-backports multiverse main universe restricted
2
dede@dede-Inspiron-5570:~$ ls /etc/apt/sources.list.d
alessandro-strada-ubuntu-ppa-focal.list
alessandro-strada-ubuntu-ppa-focal.list.save
atareao-ubuntu-atareao-focal.list
atareao-ubuntu-atareao-focal.list.save
bit-team-ubuntu-stable-focal.list
bit-team-ubuntu-stable-focal.list.save
freecad-community-ubuntu-ppa-focal.list
freecad-community-ubuntu-ppa-focal.list.save
freecad-maintainers-ubuntu-freecad-daily-focal.list
freecad-maintainers-ubuntu-freecad-daily-focal.list.save
freecad-maintainers-ubuntu-freecad-stable-focal.list
freecad-maintainers-ubuntu-freecad-stable-focal.list.save
linuxmint-tr-ubuntu-araclar-focal.list
linuxmint-tr-ubuntu-araclar-focal.list.save
mozillateam-ubuntu-ppa-focal.list
mozillateam-ubuntu-ppa-focal.list.save
saiarcot895-ubuntu-chromium-beta-focal.list
saiarcot895-ubuntu-chromium-beta-focal.list.save
teejee2008-ubuntu-ppa-focal.list
teejee2008-ubuntu-ppa-focal.list.save
3
dede@dede-Inspiron-5570:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 20.04.1 LTS _Focal Fossa_ - Release amd64 (20200731)]/ focal main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ focal main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ focal-updates main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ focal universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal universe
deb http://fr.archive.ubuntu.com/ubuntu/ focal-updates universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ focal multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ focal-updates multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb-src http://fr.archive.ubuntu.com/ubuntu/ focal-backports main restricted universe multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu focal partner
# deb-src http://archive.canonical.com/ubuntu focal partner
deb http://security.ubuntu.com/ubuntu focal-security main restricted
# deb-src http://security.ubuntu.com/ubuntu focal-security main restricted
deb http://security.ubuntu.com/ubuntu focal-security universe
# deb-src http://security.ubuntu.com/ubuntu focal-security universe
deb http://security.ubuntu.com/ubuntu focal-security multiverse
# deb-src http://security.ubuntu.com/ubuntu focal-security multiverse
# This system was installed using small removable media
# (e.g. netinst, live or single CD). The matching "deb cdrom"
# entries were disabled at the end of the installation process.
# For information about how to configure apt package sources,
# see the sources.list(5) manual.
deb http://fr.archive.ubuntu.com/ubuntu/ focal-backports multiverse main universe restricted
dede@dede-Inspiron-5570:~$ ls /etc/apt/sources.list.d
alessandro-strada-ubuntu-ppa-focal.list
alessandro-strada-ubuntu-ppa-focal.list.save
atareao-ubuntu-atareao-focal.list
atareao-ubuntu-atareao-focal.list.save
bit-team-ubuntu-stable-focal.list
bit-team-ubuntu-stable-focal.list.save
freecad-community-ubuntu-ppa-focal.list
freecad-community-ubuntu-ppa-focal.list.save
freecad-maintainers-ubuntu-freecad-daily-focal.list
freecad-maintainers-ubuntu-freecad-daily-focal.list.save
freecad-maintainers-ubuntu-freecad-stable-focal.list
freecad-maintainers-ubuntu-freecad-stable-focal.list.save
linuxmint-tr-ubuntu-araclar-focal.list
linuxmint-tr-ubuntu-araclar-focal.list.save
mozillateam-ubuntu-ppa-focal.list
mozillateam-ubuntu-ppa-focal.list.save
saiarcot895-ubuntu-chromium-beta-focal.list
saiarcot895-ubuntu-chromium-beta-focal.list.save
teejee2008-ubuntu-ppa-focal.list
teejee2008-ubuntu-ppa-focal.list.save
dede@dede-Inspiron-5570:~$ cat /etc/apt/sources.list.d/*.list
deb http://ppa.launchpad.net/atareao/atareao/ubuntu focal main
# deb-src http://ppa.launchpad.net/atareao/atareao/ubuntu focal main
deb http://ppa.launchpad.net/freecad-maintainers/freecad-daily/ubuntu focal main
# deb-src http://ppa.launchpad.net/freecad-maintainers/freecad-daily/ubuntu focal main
deb http://ppa.launchpad.net/mozillateam/ppa/ubuntu focal main
# deb-src http://ppa.launchpad.net/mozillateam/ppa/ubuntu focal main
deb http://ppa.launchpad.net/teejee2008/ppa/ubuntu focal main
# deb-src http://ppa.launchpad.net/teejee2008/ppa/ubuntu focal main
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#12 Le 21/02/2022, à 20:28
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Désolé pour conky manager c'est quelque chose que j'ai utilisé il y a pas mal de temps car j'ai un conky sur mon écran de démarrage.
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#13 Le 21/02/2022, à 20:31
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
J'utilise Freecad de temps en temps et j'ai en ce moment un message d'erreur qui s'affiche parfois en bas de l'application et qui me dit qu'il manque des versions de Python. J'avoue que je suis allé plus loin.
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#14 Le 21/02/2022, à 20:33
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
J'ai retrouvé le message.
19:31:43 Addon Manager Warning: Could not import QtWebEngineWidgets, it seems to be missing from your system. Please use your system's package manager to install the python3-pyside2.qtwebengine* and python3-pyside2.qtwebchannel packages, and if possible alert your package creator to the missing dependency. Display of package README will be limited until this dependency is resolved.
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#15 Le 21/02/2022, à 20:44
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
On verra après pour FreeCAD.
On va déjà supprimer les .list qui sont vides :
sudo rm /etc/apt/sources.list.d/alessandro-strada-ubuntu-ppa-focal.list /etc/apt/sources.list.d/alessandro-strada-ubuntu-ppa-focal.list.save /etc/apt/sources.list.d/bit-team-ubuntu-stable-focal.list /etc/apt/sources.list.d/bit-team-ubuntu-stable-focal.list.save /etc/apt/sources.list.d/freecad-community-ubuntu-ppa-focal.list /etc/apt/sources.list.d/freecad-community-ubuntu-ppa-focal.list.save /etc/apt/sources.list.d/freecad-maintainers-ubuntu-freecad-stable-focal.list /etc/apt/sources.list.d/freecad-maintainers-ubuntu-freecad-stable-focal.list.save /etc/apt/sources.list.d/linuxmint-tr-ubuntu-araclar-focal.list /etc/apt/sources.list.d/linuxmint-tr-ubuntu-araclar-focal.list.save /etc/apt/sources.list.d/saiarcot895-ubuntu-chromium-beta-focal.list /etc/apt/sources.list.d/saiarcot895-ubuntu-chromium-beta-focal.list.save
A priori, dans ce qu'il reste, il n'y a rien en rapport avec Python, à part des paquets dans le dépôts de FreeCAD mais qui ne devraient pas poser de problème et peut-être le PPA atareao qui est un fourre-tout de merdier complet. Tu utilises ce dépôt pour quoi exactement ?
Concernant conky-manager, ma question c'était surtout est-ce que tu l'utilises encore ? Autrement dit, est-ce qu'on peut le virer ou est-ce que tu veux le garder ?
Donne-moi aussi le retour de :
apt-cache policy realpath secureboot-db
ainsi que :
which python
which python3
Hors ligne
#16 Le 21/02/2022, à 20:56
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
A priori, dans ce qu'il reste, il n'y a rien en rapport avec Python, à part des paquets dans le dépôts de FreeCAD mais qui ne devraient pas poser de problème et peut-être le PPA atareao qui est un fourre-tout de merdier complet. Tu utilises ce dépôt pour quoi exactement ?
J'ai mywheather indicator comme widget. Je pense que c'est ça.
Concernant conky-manager, ma question c'était surtout est-ce que tu l'utilises encore ? Autrement dit, est-ce qu'on peut le virer ou est-ce que tu veux le garder ?
Je préférerai le garder.
dede@dede-Inspiron-5570:~$ apt-cache policy realpath secureboot-db
realpath:
Installé : 8.28-lmtrfocal
Candidat : 8.28-lmtrfocal
Table de version :
*** 8.28-lmtrfocal 100
100 /var/lib/dpkg/status
secureboot-db:
Installé : 1.6~20.04.1
Candidat : 1.6~20.04.1
Table de version :
*** 1.6~20.04.1 100
100 /var/lib/dpkg/status
1.5 500
500 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 Packages
dede@dede-Inspiron-5570:~$ which python
dede@dede-Inspiron-5570:~$
dede@dede-Inspiron-5570:~$ which python3
/usr/bin/python3
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#17 Le 21/02/2022, à 21:07
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
On va supprimer realpath :
sudo apt-get remove --purge realpath
et réinstaller secureboot-db à la version des dépôts :
sudo apt-get install --reinstall secureboot-db=1.5
Ensuite, essaie d'installer le paquet suivant :
sudo apt-get install python-is-python3
Hors ligne
#18 Le 21/02/2022, à 21:10
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Ça y est, j'ai fait les 3.
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#19 Le 21/02/2022, à 21:22
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Ok. Si tu refais un which python est-ce qu'il indique maintenant quelque chose ?
Et si tu relances gnome-tweaks (depuis un terminal), est-ce qu'il y a du changement ?
Si ce n'est pas le cas, donne le retour de :
dpkg -l | grep python
Hors ligne
#20 Le 21/02/2022, à 21:35
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Oui ça renvoi quelque chose.
dede@dede-Inspiron-5570:~$ which python
/usr/bin/python
Non rien
dede@dede-Inspiron-5570:~$ gnome-tweaks
dede@dede-Inspiron-5570:~$
dede@dede-Inspiron-5570:~$ dpkg -l | grep python
ii freecad-daily-python3 0.20~pre1~202202180417~ubuntu20.04.1 amd64 Extensible Open Source CAx program - Python 3 binaries
ii libboost-python1.71.0 1.71.0-6ubuntu6 amd64 Boost.Python Library
ii libfreecad-daily-python3-0.19 0.20~pre1~202202180417~ubuntu20.04.1 amd64 Extensible Open Source CAx program - Python 3 library files
ii libpython3-stdlib:amd64 3.8.2-0ubuntu2 amd64 interactive high-level object-oriented language (default python3 version)
ii libpython3.8:amd64 3.8.10-0ubuntu1~20.04.2 amd64 Shared Python runtime library (version 3.8)
ii libpython3.8-minimal:amd64 3.8.10-0ubuntu1~20.04.2 amd64 Minimal subset of the Python language (version 3.8)
ii libpython3.8-stdlib:amd64 3.8.10-0ubuntu1~20.04.2 amd64 Interactive high-level object-oriented language (standard library, version 3.8)
ii python-apt-common 2.0.0ubuntu0.20.04.7 all Python interface to libapt-pkg (locales)
ii python-is-python3 3.8.2-4 all symlinks /usr/bin/python to python3
ii python-matplotlib-data 3.1.2-1ubuntu4 all Python based plotting system (data package)
ii python3 3.8.2-0ubuntu2 amd64 interactive high-level object-oriented language (default python3 version)
ii python3-apport 2.20.11-0ubuntu27.21 all Python 3 library for Apport crash report handling
ii python3-apt 2.0.0ubuntu0.20.04.7 amd64 Python 3 interface to libapt-pkg
ii python3-aptdaemon 1.1.1+bzr982-0ubuntu32.3 all Python 3 module for the server and client of aptdaemon
ii python3-aptdaemon.gtk3widgets 1.1.1+bzr982-0ubuntu32.3 all Python 3 GTK+ 3 widgets to run an aptdaemon client
ii python3-bcrypt 3.1.7-2ubuntu1 amd64 password hashing library for Python 3
ii python3-blinker 1.4+dfsg1-0.3ubuntu1 all fast, simple object-to-object and broadcast signaling library
ii python3-brlapi:amd64 6.0+dfsg-4ubuntu6 amd64 Braille display access via BRLTTY - Python3 bindings
ii python3-cachetools 4.0.0-1 all extensible memoizing collections and decorators for Python 3
ii python3-cairo:amd64 1.16.2-2ubuntu2 amd64 Python3 bindings for the Cairo vector graphics library
ii python3-certifi 2019.11.28-1 all root certificates for validating SSL certs and verifying TLS hosts (python3)
ii python3-cffi-backend 1.14.0-1build1 amd64 Foreign Function Interface for Python 3 calling C code - runtime
ii python3-chardet 3.0.4-4build1 all universal character encoding detector for Python3
ii python3-click 7.0-3 all Wrapper around optparse for command line utilities - Python 3.x
ii python3-colorama 0.4.3-1build1 all Cross-platform colored terminal text in Python - Python 3.x
ii python3-commandnotfound 20.04.5 all Python 3 bindings for command-not-found.
ii python3-crypto 2.6.1-13ubuntu2 amd64 cryptographic algorithms and protocols for Python 3
ii python3-cryptography 2.8-3ubuntu0.1 amd64 Python library exposing cryptographic recipes and primitives (Python 3)
ii python3-cups 1.9.73-3build1 amd64 Python3 bindings for CUPS
ii python3-cupshelpers 1.5.12-0ubuntu1.1 all Python utility modules around the CUPS printing system
ii python3-cycler 0.10.0-3 all composable kwarg iterator (Python 3)
ii python3-dateutil 2.7.3-3ubuntu1 all powerful extensions to the standard Python 3 datetime module
ii python3-dbus 1.2.16-1build1 amd64 simple interprocess messaging system (Python 3 interface)
ii python3-debconf 1.5.73 all interact with debconf from Python 3
ii python3-debian 0.1.36ubuntu1 all Python 3 modules to work with Debian-related data formats
ii python3-defer 1.0.6-2.1 all Small framework for asynchronous programming (Python 3)
ii python3-distro 1.4.0-1 all Linux OS platform information API
ii python3-distro-info 0.23ubuntu1 all information about distributions' releases (Python 3 module)
ii python3-distupgrade 1:20.04.37 all manage release upgrades
ii python3-entrypoints 0.3-2ubuntu1 all Discover and load entry points from installed packages (Python 3)
ii python3-fasteners 0.14.1-2 all provides useful locks - Python 3.x
ii python3-future 0.18.2-2 all Clean single-source support for Python 3 and 2 - Python 3.x
ii python3-gdbm:amd64 3.8.10-0ubuntu1~20.04 amd64 GNU dbm database support for Python 3.x
ii python3-gi 3.36.0-1 amd64 Python 3 bindings for gobject-introspection libraries
ii python3-gi-cairo 3.36.0-1 amd64 Python 3 Cairo bindings for the GObject library
ii python3-google-auth 1.5.1-2 all Google Authentication Library - Python 3.x
ii python3-google-auth-httplib2 0.0.3-2 all Google Authentication Library: httplib2 transport
ii python3-googleapi 1.7.11-3 all Google APIs Client Library - Python 3.x
ii python3-gpg 1.13.1-7ubuntu2 amd64 Python interface to the GPGME GnuPG encryption library (Python 3)
ii python3-httplib2 0.14.0-1ubuntu1 all comprehensive HTTP client library written for Python3
ii python3-ibus-1.0 1.5.22-2ubuntu2.1 all Intelligent Input Bus - introspection overrides for Python (Python 3)
ii python3-idna 2.8-1 all Python IDNA2008 (RFC 5891) handling (Python 3)
ii python3-jwt 1.7.1-2ubuntu2 all Python 3 implementation of JSON Web Token
ii python3-keyring 18.0.1-2ubuntu1 all store and access your passwords safely - Python 3 version of the package
ii python3-kiwisolver 1.0.1-3build1 amd64 fast implementation of the Cassowary constraint solver - Python 3.X
ii python3-launchpadlib 1.10.13-1 all Launchpad web services client library (Python 3)
ii python3-lazr.restfulclient 0.14.2-2build1 all client for lazr.restful-based web services (Python 3)
ii python3-lazr.uri 1.0.3-4build1 all library for parsing, manipulating, and generating URIs
ii python3-ldb 2:2.2.3-0ubuntu0.20.04.2 amd64 Python 3 bindings for LDB
ii python3-lib2to3 3.8.10-0ubuntu1~20.04 all Interactive high-level object-oriented language (lib2to3)
ii python3-lockfile 1:0.12.2-2ubuntu2 all file locking library for Python — Python 3 library
ii python3-louis 3.12.0-3 all Python bindings for liblouis
ii python3-lxml:amd64 4.5.0-1ubuntu0.5 amd64 pythonic binding for the libxml2 and libxslt libraries
ii python3-macaroonbakery 1.3.1-1 all Higher-level macaroon operations for Python 3
ii python3-mako 1.1.0+ds1-1ubuntu2 all fast and lightweight templating for the Python 3 platform
ii python3-markupsafe 1.1.0-1build2 amd64 HTML/XHTML/XML string library for Python 3
ii python3-matplotlib 3.1.2-1ubuntu4 amd64 Python based plotting system in a style similar to Matlab (Python 3)
ii python3-minimal 3.8.2-0ubuntu2 amd64 minimal subset of the Python language (default python3 version)
ii python3-monotonic 1.5-0ubuntu2 all implementation of time.monotonic() - Python 3.x
ii python3-nacl 1.3.0-5 amd64 Python bindings to libsodium (Python 3)
ii python3-netifaces 0.10.4-1ubuntu4 amd64 portable network interface information - Python 3.x
ii python3-numpy 1:1.17.4-5ubuntu3 amd64 Fast array facility to the Python 3 language
ii python3-oauth2client 4.1.2-5 all OAuth 2.0 client library - Python 3.x
ii python3-oauthlib 3.1.0-1ubuntu2 all generic, spec-compliant implementation of OAuth for Python3
ii python3-olefile 0.46-2 all Python module to read/write MS OLE2 files
ii python3-openssl 19.0.0-1build1 all Python 3 wrapper around the OpenSSL library
ii python3-paramiko 2.6.0-2 all Make ssh v2 connections (Python 3)
ii python3-pexpect 4.6.0-1build1 all Python 3 module for automating interactive applications
ii python3-pikepdf 1.10.3+dfsg-1 amd64 Python library to read and write PDFs with QPDF
ii python3-pil:amd64 7.0.0-4ubuntu0.5 amd64 Python Imaging Library (Python3)
ii python3-pivy 0.6.5-1build2 amd64 Coin binding for Python 3
ii python3-pkg-resources 45.2.0-1 all Package Discovery and Resource Access using pkg_resources
ii python3-ply 3.11-3ubuntu0.1 all Lex and Yacc implementation for Python3
ii python3-problem-report 2.20.11-0ubuntu27.21 all Python 3 library to handle problem reports
ii python3-protobuf 3.6.1.3-2ubuntu5 amd64 Python 3 bindings for protocol buffers
ii python3-ptyprocess 0.6.0-1ubuntu1 all Run a subprocess in a pseudo terminal from Python 3
ii python3-pyasn1 0.4.2-3build1 all ASN.1 library for Python (Python 3 module)
ii python3-pyasn1-modules 0.2.1-0.2build1 all Collection of protocols modules written in ASN.1 language (Python 3)
ii python3-pyatspi 2.36.0-1 all Assistive Technology Service Provider Interface - Python3 bindings
ii python3-pydrive 1.3.1-0ubuntu1 all Google Drive API Python wrapper library
ii python3-pymacaroons 0.13.0-3 all Macaroon library for Python 3
ii python3-pyparsing 2.4.6-1 all alternative to creating and executing simple grammars - Python 3.x
ii python3-pyqt5 5.14.1+dfsg-3build1 amd64 Python 3 bindings for Qt5
ii python3-pyside2.qtcore 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 core module (Python 3)
ii python3-pyside2.qtgui 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 Gui module (Python 3)
ii python3-pyside2.qtnetwork 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 Network module (Python 3)
ii python3-pyside2.qtopengl 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 OpenGL module (Python 3)
ii python3-pyside2.qtsvg 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 Svg module (Python 3)
ii python3-pyside2.qtuitools 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 UiTools module (Python 3)
ii python3-pyside2.qtwebchannel 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 WebChannel module (Python 3)
ii python3-pyside2.qtwebengine 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 Web Engine (Python 3)
ii python3-pyside2.qtwidgets 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 Widgets module (Python 3)
ii python3-pyside2.qtxml 5.14.0-1~exp1ubuntu5 amd64 Python bindings for Qt5 Xml module (Python 3)
ii python3-renderpm:amd64 3.5.34-1ubuntu1 amd64 python low level render interface
ii python3-reportlab 3.5.34-1ubuntu1 all ReportLab library to create PDF documents using Python3
ii python3-reportlab-accel:amd64 3.5.34-1ubuntu1 amd64 C coded extension accelerator for the ReportLab Toolkit
ii python3-requests 2.22.0-2ubuntu1 all elegant and simple HTTP library for Python3, built for human beings
ii python3-requests-oauthlib 1.0.0-1.1build1 all module providing OAuthlib auth support for requests (Python 3)
ii python3-requests-unixsocket 0.2.0-2 all Use requests to talk HTTP via a UNIX domain socket - Python 3.x
ii python3-rfc3339 1.1-2 all parser and generator of RFC 3339-compliant timestamps (Python 3)
ii python3-rsa 4.0-3 all Pure-Python RSA implementation (Python 3)
ii python3-samba 2:4.13.17~dfsg-0ubuntu0.21.04.1 amd64 Python 3 bindings for Samba
ii python3-secretstorage 2.3.1-2ubuntu1 all Python module for storing secrets - Python 3.x version
ii python3-simplejson 3.16.0-2ubuntu2 amd64 simple, fast, extensible JSON encoder/decoder for Python 3.x
ii python3-sip 4.19.21+dfsg-1build1 amd64 Python 3/C++ bindings generator runtime library
ii python3-six 1.14.0-2 all Python 2 and 3 compatibility library (Python 3 interface)
ii python3-software-properties 0.99.9.8 all manage the repositories that you install software from
ii python3-speechd 0.9.1-4 all Python interface to Speech Dispatcher
ii python3-sqlalchemy 1.3.12+ds1-1ubuntu2 all SQL toolkit and Object Relational Mapper for Python 3
ii python3-sqlalchemy-ext 1.3.12+ds1-1ubuntu2 amd64 SQL toolkit and Object Relational Mapper for Python3 - C extension
ii python3-systemd 234-3build2 amd64 Python 3 bindings for systemd
ii python3-talloc:amd64 2.3.1-0ubuntu0.20.04.1 amd64 hierarchical pool based memory allocator - Python3 bindings
ii python3-tdb 1.4.3-0ubuntu0.20.04.1 amd64 Python3 bindings for TDB
ii python3-tk:amd64 3.8.10-0ubuntu1~20.04 amd64 Tkinter - Writing Tk applications with Python 3.x
ii python3-tz 2019.3-1 all Python3 version of the Olson timezone database
ii python3-tzlocal 2.1~b1-2 all tzinfo object for the local timezone
ii python3-unidecode 1.1.1-3build1 all ASCII transliterations of Unicode text (Python 3 module)
ii python3-uno 1:6.4.7-0ubuntu0.20.04.2 amd64 Python-UNO bridge
ii python3-update-manager 1:20.04.10.10 all python 3.x module for update-manager
ii python3-uritemplate 0.6-4 all implementation of RFC6570 - Python 3.x
ii python3-urllib3 1.25.8-2ubuntu0.1 all HTTP library with thread-safe connection pooling for Python3
ii python3-wadllib 1.3.3-3build1 all Python 3 library for navigating WADL files
ii python3-xdg 0.26-1ubuntu1 all Python 3 library to access freedesktop.org standards
ii python3-xkit 0.5.0ubuntu4 all library for the manipulation of xorg.conf files (Python 3)
ii python3-yaml 5.3.1-1ubuntu0.1 amd64 YAML parser and emitter for Python3
ii python3.8 3.8.10-0ubuntu1~20.04.2 amd64 Interactive high-level object-oriented language (version 3.8)
ii python3.8-minimal 3.8.10-0ubuntu1~20.04.2 amd64 Minimal subset of the Python language (version 3.8)
dede@dede-Inspiron-5570:~$
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#21 Le 21/02/2022, à 21:39
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Il y a des paquets qui viennent a priori du dépôt FreeCAD. On essaiera de le supprimer au cas où pour voir si ça change quelque chose.
Mais surtout, je vois qu'il y a notamment un paquet qui a l'air prévu pour la 21.04, on va essayer d'en savoir plus :
apt-cache policy python3-samba
Hors ligne
#22 Le 21/02/2022, à 21:44
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
dede@dede-Inspiron-5570:~$ apt-cache policy python3-samba
python3-samba:
Installé : 2:4.13.17~dfsg-0ubuntu0.21.04.1
Candidat : 2:4.13.17~dfsg-0ubuntu0.21.04.1
Table de version :
*** 2:4.13.17~dfsg-0ubuntu0.21.04.1 500
500 http://fr.archive.ubuntu.com/ubuntu focal-updates/main amd64 Packages
500 http://security.ubuntu.com/ubuntu focal-security/main amd64 Packages
100 /var/lib/dpkg/status
2:4.11.6+dfsg-0ubuntu1 500
500 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 Packages
dede@dede-Inspiron-5570:~$
Je te remercie beaucoup de ton aide mais malheureusement je dois m'absenter ce soir.
Est ce que l'on peut remettre ça à demain? Ton heure sera la mienne.
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#23 Le 21/02/2022, à 21:49
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Oui, pas de souci. Tu posteras un message, je verrai le sujet remonter dans la liste.
En tout cas, le paquet suspect est normal, il vient des dépôts Ubuntu, ça doit être un backport.
Hors ligne
#24 Le 22/02/2022, à 11:01
- dedepapa
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
Bonjour,
Bien je suis de nouveau dispo. Je viendrai voir régulièrement si ça bouge.
A bientôt.
Sous Ubuntu depuis 11.10 portable Dell Inspiron 15 5000 Series SSD 256Go DD 2To Ram 16Go
Hors ligne
#25 Le 22/02/2022, à 11:06
- abelthorne
Re : (Résolu) Gnome Tweaks ou Ajustment ne se lance plus
On va supprimer FreeCAD (temporairement) pour voir si une mise à jour depuis son dépôt n'aurait pas à moitié cassé Python.
D'abord, supprime le dépôt :
sudo rm /etc/apt/sources.list.d/freecad-maintainers-ubuntu-freecad-daily-focal.list /etc/apt/sources.list.d/freecad-maintainers-ubuntu-freecad-daily-focal.list.save
recharge la liste :
sudo apt-get update
et donne la liste des paquets orphelins :
apt list | grep "installé, local"
Hors ligne