impossible de voir mon DD ext

jcvilleneuve · Le 22/03/2024, à 15:24

Les 3 derniers systèmes de fichiers montés :
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
pcloud on /tmp/.mount_pcloudfsCTJJ type fuse.pcloud (ro,nosuid,nodev,relatime,user_id=1000,group_id=1000)
pCloud.fs on /home/jean-christophe/pCloudDrive type fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)

	USB, les puces :
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 003 Device 003: ID 04f2:b725 Chicony Electronics Co., Ltd Integrated Camera
Bus 003 Device 004: ID 8087:0026 Intel Corp. AX201 Bluetooth
Bus 003 Device 005: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

	USB, les modules :
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 10000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 1: Dev 5, If 0, Class=Mass Storage, Driver=uas, 480M
    |__ Port 4: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 5: Dev 3, If 2, Class=Application Specific Interface, Driver=, 480M
    |__ Port 5: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 5: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 10: Dev 4, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 10: Dev 4, If 1, Class=Wireless, Driver=btusb, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 10000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M

	DMESG :
[   79.626190] audit: type=1400 audit(1711113567.590:98): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=3606 comm="snap-confine" capability=38  capname="perfmon"
[   82.068383] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[   82.261637] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[   82.261647] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   82.261651] usb 3-1: Product: External Disk 3.0
[   82.261653] usb 3-1: Manufacturer: JMicron
[   82.261656] usb 3-1: SerialNumber: 154410601543
[   82.839655] usbcore: registered new interface driver usb-storage
[   82.854499] scsi host2: uas
[   82.854625] usbcore: registered new interface driver uas
[   82.865290] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[   82.867878] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   82.868121] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[   82.868123] sd 2:0:0:0: [sda] 4096-byte physical blocks
[   82.868377] sd 2:0:0:0: [sda] Write Protect is off
[   82.868384] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[   82.868900] sd 2:0:0:0: [sda] Disabling FUA
[   82.868902] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   82.869124] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[   82.869126] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[   82.871197]  sda:
[   82.871224] sd 2:0:0:0: [sda] Attached SCSI disk

	Contenu de /media :
total 12
drwxr-xr-x   3 root root 4096 déc.  26 18:38 .
drwxr-xr-x  20 root root 4096 mars  10 15:48 ..
drwxr-x---+  2 root root 4096 févr. 29 17:17 jean-christophe

	Contenu de /media/moi :
total 8
drwxr-x---+ 2 root root 4096 févr. 29 17:17 .
drwxr-xr-x  3 root root 4096 déc.  26 18:38 ..

	Gestionnaire(s) de fichiers :
ii  nautilus  1:42.6-0ubuntu1  amd64

	Nombre d'éléments de /home/moi ne m'appartenant pas :
25019

	Désignation STABLE des périphériques :
lrwxrwxrwx 1 root root 13 mars  22 14:18 nvme-eui.5cd2e48621c33551 -> ../../nvme0n1
lrwxrwxrwx 1 root root 13 mars  22 14:18 nvme-INTEL_SSDPEKNW512GZL_BTKA221426LD512A_1 -> ../../nvme0n1
lrwxrwxrwx 1 root root 13 mars  22 14:18 nvme-INTEL_SSDPEKNW512GZL_BTKA221426LD512A -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 mars  22 14:18 nvme-eui.5cd2e48621c33551-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 mars  22 14:18 nvme-INTEL_SSDPEKNW512GZL_BTKA221426LD512A_1-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 mars  22 14:18 nvme-INTEL_SSDPEKNW512GZL_BTKA221426LD512A-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 mars  22 14:18 nvme-eui.5cd2e48621c33551-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 mars  22 14:18 nvme-INTEL_SSDPEKNW512GZL_BTKA221426LD512A_1-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 mars  22 14:18 nvme-INTEL_SSDPEKNW512GZL_BTKA221426LD512A-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root  9 mars  22 14:19 usb-Crucial__CT250MX200SSD3_154410601543-0:0 -> ../../sda

Description:	Ubuntu 22.04.4 LTS

Noyau en service : 6.5.0-26-generic x86_64

Dernière modification par jcvilleneuve (Le 22/03/2024, à 16:38)

xubu1957 · Le 22/03/2024, à 15:35

Bonjour,

Pour ajouter toi-même les balises code à ton précédent message #1 : Merci

Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message

comme indiqué dans le : Retour utilisable de commande

Dernière modification par xubu1957 (Le 22/03/2024, à 20:17)

ylag · Le 22/03/2024, à 15:50

Bonjour,

"Nombre d'éléments de /home/moi ne m'appartenant pas :
25019"

Grand nombre de fichiers n'appartenant pas à l'utilisateur dans son répertoire personnel, est-ce que ça pourrait nuire au montage du disque externe ?

A+

Dernière modification par ylag (Le 22/03/2024, à 15:53)

geole · Le 22/03/2024, à 16:43

Bonjour
Le disque a-t-il des partitions?

sudo fdisk -l /dev/sda

jcvilleneuve · Le 22/03/2024, à 16:52

Merci de ta réponse.
Je ne trouve pas ces fichiers.
C'est peut-être lié à mon cloud synchronisé ?

Dernière modification par jcvilleneuve (Le 22/03/2024, à 17:45)

jcvilleneuve · Le 22/03/2024, à 18:18

Résultat de

sudo fdisk -l /dev/sda

Disque /dev/sda : 232,89 GiB, 250059350016 octets, 488397168 secteurs
Disk model: CT250MX200SSD3  
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xd48e6cba

nany · Le 22/03/2024, à 18:49

Bonjour,

ylag a écrit :

Grand nombre de fichiers n'appartenant pas à l'utilisateur dans son répertoire personnel, est-ce que ça pourrait nuire au montage du disque externe ?

Si, parmi tous ces fichiers, il existe un répertoire .gvfs, oui.

En règle général TOUT ce qui est dans $HOME doit appartenir à $USER.

ylag · Le 22/03/2024, à 19:01

Bonjour,

Le périphérique sda sans partition devrait pouvoir se monter quand même, si on y a créé un système de fichier ?
En fait, c'est le système de fichier qui est monté, qu'il soit à la racine du périphérique ou dans une partition de ce dernier ...

/viewtopic.php?id=2064694

A+

Dernière modification par ylag (Le 22/03/2024, à 22:04)

jcvilleneuve · Le 22/03/2024, à 19:17

Pas de dossier .gvfs, juste un dossier /.local/share/gvfs-metadata

geole · Le 22/03/2024, à 19:19

Il est quand même plus traditionnel de créer une table de partition avant de créer une partition.
onglet périphériques
ce qui a éte fait

Type d'étiquette de disque : dos

Il faut donc maintenant y créer au moins une partition.

Dernière modification par geole (Le 22/03/2024, à 19:23)

jcvilleneuve · Le 22/03/2024, à 19:24

Ok mais on fait ça comment ?

nany · Le 22/03/2024, à 19:46

jcvilleneuve a écrit :

Ok mais on fait ça comment ?

Soit avec GParted (voir le lien donné par geole ci-dessus) mais il faudrait d’abord l’installer, soit avec l’utilitaire Disques si tu es sous Gnome (voir le §2.2 de la page de doc gnome-disk-utility), soit avec l’éditeur de partitions de ta variante (kde_partition_manager pour Kubuntu par exemple).

jcvilleneuve · Le 22/03/2024, à 20:47

Oui je connais GParted et Disques.
En fait le problème et que dans ces applis le disque dur est parfois visible, parfois non.
Je pense qu'il est mort.

inbox · Le 22/03/2024, à 23:13

Salut,

As-tu essayé de changer de câble usb ?
As-tu essayé de changer de port usb ?

Peux-tu donner le retour de :

sudo dmesg

A+

jcvilleneuve · Le 22/03/2024, à 23:34

Oui aux 2 questions.

Voici ce que me renvoie

sudo dmesg

[    0.000000] microcode: updated early: 0x9a -> 0xb4, date = 2023-09-07
[    0.000000] Linux version 6.5.0-26-generic (buildd@lcy02-amd64-051) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #26~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue Mar 12 10:22:43 UTC 2 (Ubuntu 6.5.0-26.26~22.04.1-generic 6.5.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic root=UUID=375e50ee-5b53-4899-a8bb-674f62a54738 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000039f98fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000039f99000-0x000000003a898fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003a899000-0x00000000434aefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000434af000-0x00000000452fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000452ff000-0x0000000045b2efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000045b2f000-0x0000000045bfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000045bff000-0x0000000045bfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000045c00000-0x000000004f3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff400000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002b0bfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.7 by INSYDE Corp.
[    0.000000] efi: ACPI=0x45bfe000 ACPI 2.0=0x45bfe014 SMBIOS=0x439e0000 SMBIOS 3.0=0x439de000 ESRT=0x3fd1a018 MOKvar=0x43989000 RNG=0x45b8a018 
[    0.000000] random: crng init done
[    0.000000] efi: Not removing mem72: MMIO range=[0xfe010000-0xfe010fff] (4KB) from e820 map
[    0.000000] efi: Remove mem74: MMIO range=[0xff400000-0xffffffff] (12MB) from e820 map
[    0.000000] e820: remove [mem 0xff400000-0xffffffff] reserved
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: LENOVO 82H9/LNVNB161216, BIOS GGCN35WW 04/28/2022
[    0.000000] tsc: Detected 3000.000 MHz processor
[    0.000000] tsc: Detected 2995.200 MHz TSC
[    0.000004] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000006] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000010] last_pfn = 0x2b0c00 max_arch_pfn = 0x400000000
[    0.000013] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000015] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000482] last_pfn = 0x45c00 max_arch_pfn = 0x400000000
[    0.008086] esrt: Reserving ESRT space from 0x000000003fd1a018 to 0x000000003fd1a0c8.
[    0.008090] e820: update [mem 0x3fd1a000-0x3fd1afff] usable ==> reserved
[    0.008102] Using GB pages for direct mapping
[    0.008304] secureboot: Secure boot disabled
[    0.008304] RAMDISK: [mem 0x33c13000-0x37f07fff]
[    0.008308] ACPI: Early table checksum verification disabled
[    0.008311] ACPI: RSDP 0x0000000045BFE014 000024 (v02 LENOVO)
[    0.008314] ACPI: XSDT 0x0000000045BD2188 000114 (v01 LENOVO CB-01    00000002      01000013)
[    0.008319] ACPI: FACP 0x0000000045BD6000 00010C (v06 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008323] ACPI: DSDT 0x0000000045B93000 03E7F8 (v02 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008326] ACPI: FACS 0x0000000045AC3000 000040
[    0.008328] ACPI: UEFI 0x0000000045B2E000 000236 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008330] ACPI: SSDT 0x0000000045BFA000 00255C (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008332] ACPI: SSDT 0x0000000045BF4000 0059B9 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008334] ACPI: SSDT 0x0000000045BF2000 001E37 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008337] ACPI: SSDT 0x0000000045BEE000 003314 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008339] ACPI: SSDT 0x0000000045BE2000 00B1AA (v02 INTEL  TcssSsdt 00001000 INTL 20160422)
[    0.008341] ACPI: MSDM 0x0000000045BE1000 000055 (v03 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008343] ACPI: NHLT 0x0000000045BDF000 001871 (v00 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008345] ACPI: SSDT 0x0000000045BDE000 000DDE (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008348] ACPI: LPIT 0x0000000045BDD000 0000CC (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008350] ACPI: WSMT 0x0000000045BDC000 000028 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008352] ACPI: SSDT 0x0000000045BDB000 000B70 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008354] ACPI: SSDT 0x0000000045BDA000 00012A (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008357] ACPI: DBGP 0x0000000045BD9000 000034 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008359] ACPI: DBG2 0x0000000045BD8000 000054 (v00 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008361] ACPI: ECDT 0x0000000045BD7000 000069 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008363] ACPI: HPET 0x0000000045BD5000 000038 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008365] ACPI: APIC 0x0000000045BD4000 00012C (v03 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008367] ACPI: MCFG 0x0000000045BD3000 00003C (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008369] ACPI: SSDT 0x0000000045B91000 00144C (v02 LENOVO CB-01    00000002      01000013)
[    0.008372] ACPI: DMAR 0x0000000045BFD000 000088 (v02 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008374] ACPI: UEFI 0x0000000045AC0000 00063A (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008376] ACPI: UEFI 0x0000000045ABF000 00005C (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008378] ACPI: SSDT 0x0000000045B90000 00005C (v02 LENOVO CB-01    00000002 INTL 20160527)
[    0.008380] ACPI: SSDT 0x0000000045B8F000 000851 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008382] ACPI: SSDT 0x0000000045B8E000 0000F8 (v01 LENOVO CB-01    00000002 INTL 20160422)
[    0.008385] ACPI: FPDT 0x0000000045B8D000 000044 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008387] ACPI: BGRT 0x0000000045B8C000 000038 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008389] ACPI: PTDT 0x0000000045B8B000 000CFE (v00 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008391] ACPI: Reserving FACP table memory at [mem 0x45bd6000-0x45bd610b]
[    0.008392] ACPI: Reserving DSDT table memory at [mem 0x45b93000-0x45bd17f7]
[    0.008392] ACPI: Reserving FACS table memory at [mem 0x45ac3000-0x45ac303f]
[    0.008393] ACPI: Reserving UEFI table memory at [mem 0x45b2e000-0x45b2e235]
[    0.008393] ACPI: Reserving SSDT table memory at [mem 0x45bfa000-0x45bfc55b]
[    0.008394] ACPI: Reserving SSDT table memory at [mem 0x45bf4000-0x45bf99b8]
[    0.008394] ACPI: Reserving SSDT table memory at [mem 0x45bf2000-0x45bf3e36]
[    0.008395] ACPI: Reserving SSDT table memory at [mem 0x45bee000-0x45bf1313]
[    0.008395] ACPI: Reserving SSDT table memory at [mem 0x45be2000-0x45bed1a9]
[    0.008396] ACPI: Reserving MSDM table memory at [mem 0x45be1000-0x45be1054]
[    0.008396] ACPI: Reserving NHLT table memory at [mem 0x45bdf000-0x45be0870]
[    0.008397] ACPI: Reserving SSDT table memory at [mem 0x45bde000-0x45bdeddd]
[    0.008397] ACPI: Reserving LPIT table memory at [mem 0x45bdd000-0x45bdd0cb]
[    0.008398] ACPI: Reserving WSMT table memory at [mem 0x45bdc000-0x45bdc027]
[    0.008398] ACPI: Reserving SSDT table memory at [mem 0x45bdb000-0x45bdbb6f]
[    0.008399] ACPI: Reserving SSDT table memory at [mem 0x45bda000-0x45bda129]
[    0.008399] ACPI: Reserving DBGP table memory at [mem 0x45bd9000-0x45bd9033]
[    0.008400] ACPI: Reserving DBG2 table memory at [mem 0x45bd8000-0x45bd8053]
[    0.008400] ACPI: Reserving ECDT table memory at [mem 0x45bd7000-0x45bd7068]
[    0.008401] ACPI: Reserving HPET table memory at [mem 0x45bd5000-0x45bd5037]
[    0.008401] ACPI: Reserving APIC table memory at [mem 0x45bd4000-0x45bd412b]
[    0.008402] ACPI: Reserving MCFG table memory at [mem 0x45bd3000-0x45bd303b]
[    0.008402] ACPI: Reserving SSDT table memory at [mem 0x45b91000-0x45b9244b]
[    0.008403] ACPI: Reserving DMAR table memory at [mem 0x45bfd000-0x45bfd087]
[    0.008404] ACPI: Reserving UEFI table memory at [mem 0x45ac0000-0x45ac0639]
[    0.008404] ACPI: Reserving UEFI table memory at [mem 0x45abf000-0x45abf05b]
[    0.008405] ACPI: Reserving SSDT table memory at [mem 0x45b90000-0x45b9005b]
[    0.008405] ACPI: Reserving SSDT table memory at [mem 0x45b8f000-0x45b8f850]
[    0.008406] ACPI: Reserving SSDT table memory at [mem 0x45b8e000-0x45b8e0f7]
[    0.008406] ACPI: Reserving FPDT table memory at [mem 0x45b8d000-0x45b8d043]
[    0.008407] ACPI: Reserving BGRT table memory at [mem 0x45b8c000-0x45b8c037]
[    0.008407] ACPI: Reserving PTDT table memory at [mem 0x45b8b000-0x45b8bcfd]
[    0.008661] No NUMA configuration found
[    0.008661] Faking a node at [mem 0x0000000000000000-0x00000002b0bfffff]
[    0.008667] NODE_DATA(0) allocated [mem 0x2b0bd5000-0x2b0bfffff]
[    0.008775] Zone ranges:
[    0.008775]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008777]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008778]   Normal   [mem 0x0000000100000000-0x00000002b0bfffff]
[    0.008779]   Device   empty
[    0.008779] Movable zone start for each node
[    0.008780] Early memory node ranges
[    0.008781]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008782]   node   0: [mem 0x0000000000100000-0x0000000039f98fff]
[    0.008782]   node   0: [mem 0x000000003a899000-0x00000000434aefff]
[    0.008783]   node   0: [mem 0x0000000045bff000-0x0000000045bfffff]
[    0.008783]   node   0: [mem 0x0000000100000000-0x00000002b0bfffff]
[    0.008785] Initmem setup node 0 [mem 0x0000000000001000-0x00000002b0bfffff]
[    0.008788] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008803] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.010254] On node 0, zone DMA32: 2304 pages in unavailable ranges
[    0.010310] On node 0, zone DMA32: 10064 pages in unavailable ranges
[    0.018955] On node 0, zone Normal: 9216 pages in unavailable ranges
[    0.019124] On node 0, zone Normal: 29696 pages in unavailable ranges
[    0.019148] Reserving Intel graphics memory at [mem 0x4b800000-0x4f3fffff]
[    0.019440] ACPI: PM-Timer IO Port: 0x1808
[    0.019446] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.019448] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.019448] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.019449] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.019449] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.019449] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.019450] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.019450] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.019451] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.019451] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.019452] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.019452] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.019453] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.019453] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.019454] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.019454] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.019489] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.019492] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.019493] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.019496] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.019497] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.019503] e820: update [mem 0x3fbfc000-0x3fca4fff] usable ==> reserved
[    0.019509] TSC deadline timer available
[    0.019510] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.019518] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.019519] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.019520] PM: hibernation: Registered nosave memory: [mem 0x39f99000-0x3a898fff]
[    0.019521] PM: hibernation: Registered nosave memory: [mem 0x3fbfc000-0x3fca4fff]
[    0.019522] PM: hibernation: Registered nosave memory: [mem 0x3fd1a000-0x3fd1afff]
[    0.019523] PM: hibernation: Registered nosave memory: [mem 0x434af000-0x452fefff]
[    0.019523] PM: hibernation: Registered nosave memory: [mem 0x452ff000-0x45b2efff]
[    0.019524] PM: hibernation: Registered nosave memory: [mem 0x45b2f000-0x45bfefff]
[    0.019525] PM: hibernation: Registered nosave memory: [mem 0x45c00000-0x4f3fffff]
[    0.019525] PM: hibernation: Registered nosave memory: [mem 0x4f400000-0xfe00ffff]
[    0.019526] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
[    0.019526] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff]
[    0.019527] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.019527] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
[    0.019528] [mem 0x4f400000-0xfe00ffff] available for PCI devices
[    0.019529] Booting paravirtualized kernel on bare hardware
[    0.019531] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.019536] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.019769] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288
[    0.019773] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152
[    0.019774] pcpu-alloc: [0] 0 1 2 3 
[    0.019786] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic root=UUID=375e50ee-5b53-4899-a8bb-674f62a54738 ro quiet splash vt.handoff=7
[    0.019843] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic", will be passed to user space.
[    0.020520] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.020850] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.020901] Fallback order for Node 0: 0 
[    0.020904] Built 1 zonelists, mobility grouping on.  Total pages: 2013649
[    0.020905] Policy zone: Normal
[    0.020909] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.020917] software IO TLB: area num 4.
[    0.042443] Memory: 7768960K/8183096K available (20480K kernel code, 4266K rwdata, 13188K rodata, 4808K init, 17380K bss, 413876K reserved, 0K cma-reserved)
[    0.042586] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.042607] ftrace: allocating 55231 entries in 216 pages
[    0.049474] ftrace: allocated 216 pages with 4 groups
[    0.050144] Dynamic Preempt: voluntary
[    0.050165] rcu: Preemptible hierarchical RCU implementation.
[    0.050166] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.050167] 	Trampoline variant of Tasks RCU enabled.
[    0.050167] 	Rude variant of Tasks RCU enabled.
[    0.050167] 	Tracing variant of Tasks RCU enabled.
[    0.050168] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.050168] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.052023] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.052318] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.052535] Console: colour dummy device 80x25
[    0.052537] printk: console [tty0] enabled
[    0.052566] ACPI: Core revision 20230331
[    0.052772] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.052773] APIC: Switch to symmetric I/O mode setup
[    0.052775] DMAR: Host address width 39
[    0.052776] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.052780] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 69e2ff0505e
[    0.052782] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.052787] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.052789] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f3fffff
[    0.052791] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.052793] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.052793] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.054405] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.054408] x2apic enabled
[    0.054425] Switched APIC routing to cluster x2apic.
[    0.059036] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns
[    0.059044] Calibrating delay loop (skipped), value calculated using timer frequency.. 5990.40 BogoMIPS (lpj=11980800)
[    0.059070] CPU0: Thermal monitoring enabled (TM1)
[    0.059072] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.059183] process: using mwait in idle threads
[    0.059185] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.059186] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.059189] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.059191] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.059191] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.059192] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.059193] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.059194] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.059197] GDS: Mitigation: Microcode
[    0.059203] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.059204] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.059204] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.059205] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    0.059206] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    0.059206] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    0.059207] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.059208] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.059209] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    0.059209] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    0.059210] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    0.059211] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    0.059212] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[    0.063040] Freeing SMP alternatives memory: 44K
[    0.063040] pid_max: default: 32768 minimum: 301
[    0.063040] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity
[    0.063040] landlock: Up and running.
[    0.063040] Yama: becoming mindful.
[    0.063040] AppArmor: AppArmor initialized
[    0.063040] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.063040] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.063040] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz (family: 0x6, model: 0x8c, stepping: 0x1)
[    0.063040] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.063040] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.063040] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.063040] Performance Events: PEBS fmt4+-baseline,  AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.063040] ... version:                5
[    0.063040] ... bit width:              48
[    0.063040] ... generic registers:      8
[    0.063040] ... value mask:             0000ffffffffffff
[    0.063040] ... max period:             00007fffffffffff
[    0.063040] ... fixed-purpose events:   4
[    0.063040] ... event mask:             0001000f000000ff
[    0.063040] signal: max sigframe size: 3632
[    0.063040] Estimated ratio of average max frequency by base frequency (times 1024): 1399
[    0.063040] rcu: Hierarchical SRCU implementation.
[    0.063040] rcu: 	Max phase no-delay instances is 1000.
[    0.063040] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.063040] smp: Bringing up secondary CPUs ...
[    0.063040] smpboot: x86: Booting SMP configuration:
[    0.063040] .... node  #0, CPUs:      #1 #2 #3
[    0.063149] smp: Brought up 1 node, 4 CPUs
[    0.063149] smpboot: Max logical packages: 1
[    0.063149] smpboot: Total of 4 processors activated (23961.60 BogoMIPS)
[    0.066253] devtmpfs: initialized
[    0.066253] x86/mm: Memory block size: 128MB
[    0.067410] ACPI: PM: Registering ACPI NVS region [mem 0x452ff000-0x45b2efff] (8585216 bytes)
[    0.067410] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.067410] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.067410] pinctrl core: initialized pinctrl subsystem
[    0.067410] PM: RTC time: 15:42:23, date: 2024-03-22
[    0.067705] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.067831] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.067896] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.067960] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.067967] audit: initializing netlink subsys (disabled)
[    0.067972] audit: type=2000 audit(1711122143.008:1): state=initialized audit_enabled=0 res=1
[    0.067972] thermal_sys: Registered thermal governor 'fair_share'
[    0.067972] thermal_sys: Registered thermal governor 'bang_bang'
[    0.067972] thermal_sys: Registered thermal governor 'step_wise'
[    0.067972] thermal_sys: Registered thermal governor 'user_space'
[    0.067972] thermal_sys: Registered thermal governor 'power_allocator'
[    0.067972] EISA bus registered
[    0.067972] cpuidle: using governor ladder
[    0.067972] cpuidle: using governor menu
[    0.067972] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.067972] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.067972] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.067972] PCI: not using MMCONFIG
[    0.067972] PCI: Using configuration type 1 for base access
[    0.067972] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.067972] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.067972] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.067972] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.067972] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.067972] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.067972] ACPI: Added _OSI(Module Device)
[    0.067972] ACPI: Added _OSI(Processor Device)
[    0.067972] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.067972] ACPI: Added _OSI(Processor Aggregator Device)
[    0.113746] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0], AE_NOT_FOUND (20230331/dswload2-162)
[    0.113753] fbcon: Taking over console
[    0.113761] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230331/psobject-220)
[    0.113764] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[    0.114094] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.114942] ACPI: EC: EC started
[    0.114942] ACPI: EC: interrupt blocked
[    0.115393] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.115394] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.121684] ACPI: Dynamic OEM Table Load:
[    0.121693] ACPI: SSDT 0xFFFF9CFFC11CDC00 0001C6 (v02 PmRef  Cpu0Psd  00003000 INTL 20160422)
[    0.122330] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.123011] ACPI: Dynamic OEM Table Load:
[    0.123016] ACPI: SSDT 0xFFFF9CFFC1190400 000386 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.123764] ACPI: Dynamic OEM Table Load:
[    0.123769] ACPI: SSDT 0xFFFF9CFFC132E000 000689 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.124593] ACPI: Dynamic OEM Table Load:
[    0.124597] ACPI: SSDT 0xFFFF9CFFC1193C00 000266 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.125471] ACPI: Dynamic OEM Table Load:
[    0.125476] ACPI: SSDT 0xFFFF9CFFC0DD8000 0008E7 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.126329] ACPI: Dynamic OEM Table Load:
[    0.126333] ACPI: SSDT 0xFFFF9CFFC132D000 00048A (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.127115] ACPI: Dynamic OEM Table Load:
[    0.127119] ACPI: SSDT 0xFFFF9CFFC132C800 0004D4 (v02 PmRef  ApPsd    00003000 INTL 20160422)
[    0.127897] ACPI: Dynamic OEM Table Load:
[    0.127901] ACPI: SSDT 0xFFFF9CFFC1329800 00048A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.129534] ACPI: Interpreter enabled
[    0.129576] ACPI: PM: (supports S0 S4 S5)
[    0.129577] ACPI: Using IOAPIC for interrupt routing
[    0.130522] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.131206] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource
[    0.131213] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.131214] PCI: Using E820 reservations for host bridge windows
[    0.131609] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.132097] ACPI: \_SB_.PC00.PEG0.PCRP: New power resource
[    0.132122] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.DGPV], AE_NOT_FOUND (20230331/psargs-330)

[    0.132128] No Local Variables are initialized for Method [_ON_]

[    0.132129] No Arguments are initialized for method [_ON_]

[    0.132130] ACPI Error: Aborting method \_SB.PC00.PEG0.PCRP._ON due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.134891] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTPR: New power resource
[    0.135922] ACPI: \_SB_.PC00.PAUD: New power resource
[    0.142540] ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource
[    0.142638] ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource
[    0.142734] ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource
[    0.144594] ACPI: \_SB_.PC00.I2C0.PXTC: New power resource
[    0.146188] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[    0.146419] ACPI: \_SB_.PC00.TBT0: New power resource
[    0.146461] ACPI: \_SB_.PC00.TBT1: New power resource
[    0.154512] ACPI: \PIN_: New power resource
[    0.154766] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
[    0.154771] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.156464] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.159800] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
[    0.159801] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.162822] PCI host bridge to bus 0000:00
[    0.162823] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.162825] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.162826] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.162827] pci_bus 0000:00: root bus resource [mem 0x4f400000-0xbfffffff window]
[    0.162828] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.162829] pci_bus 0000:00: root bus resource [bus 00-e0]
[    0.162857] pci 0000:00:00.0: [8086:9a04] type 00 class 0x060000
[    0.162964] pci 0000:00:02.0: [8086:9a78] type 00 class 0x030000
[    0.162972] pci 0000:00:02.0: reg 0x10: [mem 0x6002000000-0x6002ffffff 64bit]
[    0.162977] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.162980] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.162993] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.162994] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.162996] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.163020] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[    0.163021] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[    0.163026] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[    0.163026] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[    0.163171] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000
[    0.163187] pci 0000:00:04.0: reg 0x10: [mem 0x6003200000-0x600321ffff 64bit]
[    0.163444] pci 0000:00:0a.0: [8086:9a0d] type 00 class 0x118000
[    0.163451] pci 0000:00:0a.0: reg 0x10: [mem 0x6003230000-0x6003237fff 64bit]
[    0.163471] pci 0000:00:0a.0: enabling Extended Tags
[    0.163556] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330
[    0.163568] pci 0000:00:0d.0: reg 0x10: [mem 0x6003220000-0x600322ffff 64bit]
[    0.163620] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[    0.163961] pci 0000:00:0e.0: [8086:9a0b] type 00 class 0x010400
[    0.163973] pci 0000:00:0e.0: reg 0x10: [mem 0x6000000000-0x6001ffffff 64bit]
[    0.163978] pci 0000:00:0e.0: reg 0x18: [mem 0x50000000-0x51ffffff]
[    0.163990] pci 0000:00:0e.0: reg 0x20: [mem 0x6003100000-0x60031fffff 64bit]
[    0.164119] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330
[    0.164139] pci 0000:00:14.0: reg 0x10: [mem 0x52000000-0x5200ffff 64bit]
[    0.164224] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.164555] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000
[    0.164577] pci 0000:00:14.2: reg 0x10: [mem 0x6003240000-0x6003243fff 64bit]
[    0.164593] pci 0000:00:14.2: reg 0x18: [mem 0x600324a000-0x600324afff 64bit]
[    0.164736] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000
[    0.164759] pci 0000:00:14.3: reg 0x10: [mem 0x600323c000-0x600323ffff 64bit]
[    0.164893] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.165150] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000
[    0.165177] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.165580] pci 0000:00:15.1: [8086:a0e9] type 00 class 0x0c8000
[    0.165607] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.165956] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000
[    0.165978] pci 0000:00:16.0: reg 0x10: [mem 0x6003247000-0x6003247fff 64bit]
[    0.166063] pci 0000:00:16.0: PME# supported from D3hot
[    0.166386] pci 0000:00:17.0: [8086:a0d3] type 00 class 0x010601
[    0.166403] pci 0000:00:17.0: reg 0x10: [mem 0x52010000-0x52011fff]
[    0.166414] pci 0000:00:17.0: reg 0x14: [mem 0x52014000-0x520140ff]
[    0.166424] pci 0000:00:17.0: reg 0x18: [io  0x3080-0x3087]
[    0.166435] pci 0000:00:17.0: reg 0x1c: [io  0x3088-0x308b]
[    0.166445] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    0.166456] pci 0000:00:17.0: reg 0x24: [mem 0x52013000-0x520137ff]
[    0.166506] pci 0000:00:17.0: PME# supported from D3hot
[    0.167094] pci 0000:00:1e.0: [8086:a0a8] type 00 class 0x078000
[    0.167122] pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.167577] pci 0000:00:1e.3: [8086:a0ab] type 00 class 0x0c8000
[    0.167604] pci 0000:00:1e.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.167937] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100
[    0.168235] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100
[    0.168277] pci 0000:00:1f.3: reg 0x10: [mem 0x6003238000-0x600323bfff 64bit]
[    0.168331] pci 0000:00:1f.3: reg 0x20: [mem 0x6003000000-0x60030fffff 64bit]
[    0.168436] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.168776] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500
[    0.168800] pci 0000:00:1f.4: reg 0x10: [mem 0x6003244000-0x60032440ff 64bit]
[    0.168830] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.169036] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000
[    0.169055] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.176492] Low-power S0 idle used by default for system suspend
[    0.177561] ACPI: EC: interrupt unblocked
[    0.177562] ACPI: EC: event unblocked
[    0.177578] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.177579] ACPI: EC: GPE=0x6e
[    0.177580] ACPI: \_SB_.PC00.LPCB.EC0_: Boot ECDT EC initialization complete
[    0.177581] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
[    0.179062] iommu: Default domain type: Translated
[    0.179062] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.179148] SCSI subsystem initialized
[    0.179151] libata version 3.00 loaded.
[    0.179151] ACPI: bus type USB registered
[    0.179151] usbcore: registered new interface driver usbfs
[    0.179151] usbcore: registered new interface driver hub
[    0.179151] usbcore: registered new device driver usb
[    0.179151] pps_core: LinuxPPS API ver. 1 registered
[    0.179151] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.179151] PTP clock support registered
[    0.179151] EDAC MC: Ver: 3.0.0
[    0.179366] efivars: Registered efivars operations
[    0.179370] NetLabel: Initializing
[    0.179370] NetLabel:  domain hash size = 128
[    0.179370] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.179370] NetLabel:  unlabeled traffic allowed by default
[    0.179370] mctp: management component transport protocol core
[    0.179370] NET: Registered PF_MCTP protocol family
[    0.179370] PCI: Using ACPI for IRQ routing
[    0.199017] PCI: pci_cache_line_size set to 64 bytes
[    0.199170] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[    0.199302] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.199303] e820: reserve RAM buffer [mem 0x39f99000-0x3bffffff]
[    0.199304] e820: reserve RAM buffer [mem 0x3fbfc000-0x3fffffff]
[    0.199304] e820: reserve RAM buffer [mem 0x3fd1a000-0x3fffffff]
[    0.199305] e820: reserve RAM buffer [mem 0x434af000-0x43ffffff]
[    0.199306] e820: reserve RAM buffer [mem 0x45c00000-0x47ffffff]
[    0.199306] e820: reserve RAM buffer [mem 0x2b0c00000-0x2b3ffffff]
[    0.203057] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.203057] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.203057] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.203057] vgaarb: loaded
[    0.204137] clocksource: Switched to clocksource tsc-early
[    0.209444] VFS: Disk quotas dquot_6.6.0
[    0.209452] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.209543] AppArmor: AppArmor Filesystem Enabled
[    0.209579] pnp: PnP ACPI init
[    0.209894] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.209896] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.210005] system 00:01: [io  0x1854-0x1857] has been reserved
[    0.210449] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    0.210466] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    0.210467] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.210468] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.210469] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
[    0.210471] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.210472] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.210473] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.211007] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.211009] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.211010] system 00:04: [mem 0xfe04c000-0xfe04ffff] has been reserved
[    0.211011] system 00:04: [mem 0xfe050000-0xfe0affff] has been reserved
[    0.211012] system 00:04: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[    0.211013] system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.211014] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.211014] system 00:04: [mem 0xfd000000-0xfd68ffff] has been reserved
[    0.211017] system 00:04: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.211018] system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.211251] system 00:05: [io  0x2000-0x20fe] has been reserved
[    0.211565] pnp: PnP ACPI: found 7 devices
[    0.216773] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.216813] NET: Registered PF_INET protocol family
[    0.216895] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.217920] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.217943] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.217984] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.218160] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.218310] TCP: Hash tables configured (established 65536 bind 65536)
[    0.218362] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.218391] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.218405] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.218433] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.218437] NET: Registered PF_XDP protocol family
[    0.218442] pci_bus 0000:00: max bus depth: 0 pci_try_num: 1
[    0.218449] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[    0.218452] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[    0.218454] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[    0.218516] pci 0000:00:15.1: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[    0.218531] pci 0000:00:1e.0: BAR 0: assigned [mem 0x4017002000-0x4017002fff 64bit]
[    0.218594] pci 0000:00:1e.3: BAR 0: assigned [mem 0x4017003000-0x4017003fff 64bit]
[    0.218652] resource: avoiding allocation from e820 entry [mem 0x0009f000-0x000fffff]
[    0.218654] pci 0000:00:1f.5: BAR 0: assigned [mem 0x4f400000-0x4f400fff]
[    0.218660] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.218661] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.218662] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.218663] pci_bus 0000:00: resource 7 [mem 0x4f400000-0xbfffffff window]
[    0.218664] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.220487] PCI: CLS 64 bytes, default 64
[    0.220501] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.220502] software IO TLB: mapped [mem 0x000000003b24f000-0x000000003f24f000] (64MB)
[    0.220521] Trying to unpack rootfs image as initramfs...
[    0.220550] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
[    0.220552] caller __uncore_imc_init_box+0xcb/0x150 mapping multiple BARs
[    0.230585] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns
[    0.230600] clocksource: Switched to clocksource tsc
[    0.230630] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.230919] Initialise system trusted keyrings
[    0.230926] Key type blacklist registered
[    0.230947] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.230957] zbud: loaded
[    0.231080] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.231127] fuse: init (API version 7.38)
[    0.231215] integrity: Platform Keyring initialized
[    0.231219] integrity: Machine keyring initialized
[    0.235774] Key type asymmetric registered
[    0.235775] Asymmetric key parser 'x509' registered
[    0.235786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.235809] io scheduler mq-deadline registered
[    0.235941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.235973] efifb: probing for efifb
[    0.235984] efifb: showing boot graphics
[    0.237180] efifb: framebuffer at 0x4000000000, using 5628k, total 5625k
[    0.237182] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    0.237183] efifb: scrolling: redraw
[    0.237184] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.237244] Console: switching to colour frame buffer device 200x56
[    0.238709] fb0: EFI VGA frame buffer device
[    0.238909] Monitor-Mwait will be used to enter C-1 state
[    0.238912] Monitor-Mwait will be used to enter C-2 state
[    0.238913] Monitor-Mwait will be used to enter C-3 state
[    0.238915] ACPI: \_SB_.PR00: Found 3 idle states
[    0.239178] ACPI: AC: AC Adapter [ADP0] (off-line)
[    0.239220] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.239233] ACPI: button: Lid Switch [LID0]
[    0.239250] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.239261] ACPI: button: Power Button [PWRB]
[    0.240044] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.241583] hpet_acpi_add: no address or irqs in _CRS
[    0.241606] Linux agpgart interface v0.103
[    0.242365] loop: module loaded
[    0.242523] tun: Universal TUN/TAP device driver, 1.6
[    0.242542] PPP generic driver version 2.4.2
[    0.242618] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.242620] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.243393] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.243447] mousedev: PS/2 mouse device common for all mice
[    0.243527] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.244385] rtc_cmos rtc_cmos: registered as rtc0
[    0.244562] rtc_cmos rtc_cmos: setting system clock to 2024-03-22T15:42:24 UTC (1711122144)
[    0.244588] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.244593] i2c_dev: i2c /dev entries driver
[    0.244693] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.244698] device-mapper: uevent: version 1.0.3
[    0.244720] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    0.244729] platform eisa.0: Probing EISA bus 0
[    0.244730] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.244731] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.244731] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.244732] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.244733] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.244734] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.244734] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.244735] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.244736] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.244736] platform eisa.0: EISA: Detected 0 cards
[    0.244738] intel_pstate: Intel P-state driver initializing
[    0.244919] intel_pstate: HWP enabled
[    0.245045] ledtrig-cpu: registered to indicate activity on CPUs
[    0.245158] intel_pmc_core INT33A1:00:  initialized
[    0.245222] drop_monitor: Initializing network drop monitor service
[    0.252720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.254444] NET: Registered PF_INET6 protocol family
[    0.334823] ACPI: battery: Slot [BAT0] (battery present)
[    0.442280] Freeing initrd memory: 68564K
[    0.445857] Segment Routing with IPv6
[    0.445868] In-situ OAM (IOAM) with IPv6
[    0.445890] NET: Registered PF_PACKET protocol family
[    0.445910] Key type dns_resolver registered
[    0.446224] microcode: Microcode Update Driver: v2.2.
[    0.446251] resctrl: L2 allocation detected
[    0.446256] IPI shorthand broadcast: enabled
[    0.447140] sched_clock: Marking stable (440002132, 6542848)->(470136134, -23591154)
[    0.447337] registered taskstats version 1
[    0.447455] Loading compiled-in X.509 certificates
[    0.447857] Loaded X.509 cert 'Build time autogenerated kernel key: 64d8c1ccb61f14b3afd1bd02d3c86dda564ef290'
[    0.448242] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.448598] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.448600] blacklist: Loading compiled-in revocation X.509 certificates
[    0.448611] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.448620] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[    0.448628] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[    0.448636] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[    0.448646] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[    0.448656] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[    0.448665] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[    0.448673] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[    0.449723] Key type .fscrypt registered
[    0.449724] Key type fscrypt-provisioning registered
[    0.451206] Key type encrypted registered
[    0.451208] AppArmor: AppArmor sha1 policy hashing enabled
[    0.453067] integrity: Loading X.509 certificate: UEFI:db
[    0.453106] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.453107] integrity: Loading X.509 certificate: UEFI:db
[    0.453120] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.453121] integrity: Loading X.509 certificate: UEFI:db
[    0.453130] integrity: Loaded X.509 cert 'GGV1415G2ITL3-141517ITL6: 1fa615ea4c52809d4610564911163db0'
[    0.453131] integrity: Loading X.509 certificate: UEFI:db
[    0.453132] integrity: Problem loading X.509 certificate -65
[    0.453149] integrity: Error adding keys to platform keyring UEFI:db
[    0.457005] ima: No TPM chip found, activating TPM-bypass!
[    0.457010] Loading compiled-in module X.509 certificates
[    0.457457] Loaded X.509 cert 'Build time autogenerated kernel key: 64d8c1ccb61f14b3afd1bd02d3c86dda564ef290'
[    0.457459] ima: Allocated hash algorithm: sha1
[    0.457464] ima: No architecture policies found
[    0.457481] evm: Initialising EVM extended attributes:
[    0.457481] evm: security.selinux
[    0.457482] evm: security.SMACK64
[    0.457483] evm: security.SMACK64EXEC
[    0.457483] evm: security.SMACK64TRANSMUTE
[    0.457484] evm: security.SMACK64MMAP
[    0.457484] evm: security.apparmor
[    0.457485] evm: security.ima
[    0.457485] evm: security.capability
[    0.457486] evm: HMAC attrs: 0x1
[    0.457716] PM:   Magic number: 0:909:740
[    0.459957] RAS: Correctable Errors collector initialized.
[    0.459993] clk: Disabling unused clocks
[    0.465101] Freeing unused decrypted memory: 2036K
[    0.465537] Freeing unused kernel image (initmem) memory: 4808K
[    0.486709] Write protecting the kernel read-only data: 34816k
[    0.487148] Freeing unused kernel image (rodata/data gap) memory: 1148K
[    0.501873] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.501878] Run /init as init process
[    0.501879]   with arguments:
[    0.501880]     /init
[    0.501881]     splash
[    0.501882]   with environment:
[    0.501882]     HOME=/
[    0.501883]     TERM=linux
[    0.501883]     BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic
[    0.572629] hid: raw HID events driver (C) Jiri Kosina
[    0.579507] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    0.579514] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[    0.579688] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[    0.579692] pci_bus 10000:e0: root bus resource [bus e0-ff]
[    0.579694] pci_bus 10000:e0: root bus resource [mem 0x50000000-0x51ffffff]
[    0.579696] pci_bus 10000:e0: root bus resource [mem 0x6003102000-0x60031fffff 64bit]
[    0.579707] pci 10000:e0:1c.0: [8086:09ab] type 00 class 0x088000
[    0.579777] pci 10000:e0:1c.4: [8086:a0bc] type 01 class 0x060400
[    0.579881] pci 10000:e0:1c.4: PME# supported from D0 D3hot D3cold
[    0.579927] pci 10000:e0:1c.4: PTM enabled (root), 4ns granularity
[    0.580022] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.580090] pci 10000:e1:00.0: [8086:f1aa] type 00 class 0x010802
[    0.580120] pci 10000:e1:00.0: reg 0x10: [mem 0x50000000-0x50003fff 64bit]
[    0.580322] pci 10000:e1:00.0: reg 0x1ac: [mem 0x00000000-0x00003fff 64bit]
[    0.580323] pci 10000:e1:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
[    0.580573] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    0.580615] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.580619] pci 10000:e0:1c.4:   bridge window [io  0x0000-0x0fff]
[    0.580622] pci 10000:e0:1c.4:   bridge window [mem 0x50000000-0x500fffff]
[    0.580630] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.580763] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    0.580766] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[    0.580768] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.580798] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    0.580800] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.580801] usb usb1: Product: xHCI Host Controller
[    0.580801] usb usb1: Manufacturer: Linux 6.5.0-26-generic xhci-hcd
[    0.580803] usb usb1: SerialNumber: 0000:00:0d.0
[    0.580878] hub 1-0:1.0: USB hub found
[    0.580886] hub 1-0:1.0: 1 port detected
[    0.580956] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    0.580957] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.580958] usb usb2: Product: xHCI Host Controller
[    0.580959] usb usb2: Manufacturer: Linux 6.5.0-26-generic xhci-hcd
[    0.580960] usb usb2: SerialNumber: 0000:00:0d.0
[    0.581004] hub 2-0:1.0: USB hub found
[    0.581012] hub 2-0:1.0: 4 ports detected
[    0.581296] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.581299] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.582386] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    0.582742] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.582745] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.582747] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.582777] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    0.582779] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.582780] usb usb3: Product: xHCI Host Controller
[    0.582781] usb usb3: Manufacturer: Linux 6.5.0-26-generic xhci-hcd
[    0.582782] usb usb3: SerialNumber: 0000:00:14.0
[    0.582907] hub 3-0:1.0: USB hub found
[    0.582925] hub 3-0:1.0: 12 ports detected
[    0.583345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    0.583347] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.583348] usb usb4: Product: xHCI Host Controller
[    0.583349] usb usb4: Manufacturer: Linux 6.5.0-26-generic xhci-hcd
[    0.583350] usb usb4: SerialNumber: 0000:00:14.0
[    0.583398] hub 4-0:1.0: USB hub found
[    0.583407] hub 4-0:1.0: 4 ports detected
[    0.583656] usb: port power management may be unreliable
[    0.594129] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    0.608631] ahci 0000:00:17.0: version 3.0
[    0.610679] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.610750] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.611884] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    0.613914] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    0.617121] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.617126] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds 
[    0.620952] scsi host0: ahci
[    0.621410] scsi host1: ahci
[    0.621475] ata1: SATA max UDMA/133 abar m2048@0x52013000 port 0x52013100 irq 143
[    0.621481] ata2: SATA max UDMA/133 abar m2048@0x52013000 port 0x52013180 irq 143
[    0.634425] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[    0.636183] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    0.657018] intel-lpss 0000:00:1e.0: enabling device (0004 -> 0006)
[    0.657352] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    0.668593] intel-lpss 0000:00:1e.3: enabling device (0004 -> 0006)
[    0.669058] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    0.774796] pci 10000:e0:1c.4: bridge window [mem 0x00100000-0x001fffff] to [bus e1] add_size 100000 add_align 100000
[    0.774812] pci 10000:e0:1c.4: BAR 14: assigned [mem 0x50000000-0x501fffff]
[    0.774816] pci 10000:e0:1c.4: BAR 13: no space for [io  size 0x1000]
[    0.774819] pci 10000:e0:1c.4: BAR 13: failed to assign [io  size 0x1000]
[    0.774823] pci 10000:e0:1c.4: BAR 13: no space for [io  size 0x1000]
[    0.774825] pci 10000:e0:1c.4: BAR 13: failed to assign [io  size 0x1000]
[    0.774831] pci 10000:e1:00.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit]
[    0.774851] pci 10000:e1:00.0: BAR 7: assigned [mem 0x50004000-0x50023fff 64bit]
[    0.774861] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.774869] pci 10000:e0:1c.4:   bridge window [mem 0x50000000-0x501fffff]
[    0.774929] pci 10000:e1:00.0: VMD: Default LTR value set by driver
[    0.774996] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    0.774999] pcieport 10000:e0:1c.4: PCI INT A: no GSI
[    0.775194] pcieport 10000:e0:1c.4: PME: Signaling with IRQ 145
[    0.775406] vmd 0000:00:0e.0: Bound to PCI domain 10000
[    0.814665] i801_smbus 0000:00:1f.4: Transaction timeout
[    0.816792] i801_smbus 0000:00:1f.4: Failed terminating the transaction
[    0.816866] i801_smbus 0000:00:1f.4: SMBus is busy, can't use it!
[    0.846611] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[    0.937077] ata1: SATA link down (SStatus 4 SControl 300)
[    0.939122] ata2: SATA link down (SStatus 4 SControl 300)
[    0.954963] input: MSFT0001:01 06CB:CE2D Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input3
[    0.955115] input: MSFT0001:01 06CB:CE2D Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input4
[    0.955238] hid-generic 0018:06CB:CE2D.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 06CB:CE2D] on i2c-MSFT0001:01
[    0.965063] nvme nvme0: pci function 10000:e1:00.0
[    0.965329] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    0.965333] nvme 10000:e1:00.0: PCI INT A: not connected
[    0.972944] nvme nvme0: 4/0/0 default/read/poll queues
[    0.976430]  nvme0n1: p1 p2
[    0.997217] usb 3-4: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[    0.997225] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.997228] usb 3-4: Product: USB Receiver
[    0.997230] usb 3-4: Manufacturer: Logitech
[    1.126681] usb 3-5: new high-speed USB device number 3 using xhci_hcd
[    1.277276] usb 3-5: New USB device found, idVendor=04f2, idProduct=b725, bcdDevice=27.36
[    1.277285] usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.277289] usb 3-5: Product: Integrated Camera
[    1.277292] usb 3-5: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.277294] usb 3-5: SerialNumber: 0001
[    1.406661] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    1.557190] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    1.557200] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.568885] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C52F.0002/input/input6
[    1.568965] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    1.570069] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0003/input/input7
[    1.626962] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    1.627059] usbcore: registered new interface driver usbhid
[    1.627062] usbhid: USB HID core driver
[    1.683232] logitech-djreceiver 0003:046D:C52F.0002: hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    1.775735] logitech-djreceiver 0003:046D:C52F.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    1.836527] logitech-djreceiver 0003:046D:C52F.0003: device of type eQUAD step 4 DJ (0x04) connected on slot 1
[    1.837368] input: Logitech Wireless Mouse PID:4057 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0003/0003:046D:4057.0004/input/input10
[    1.837635] input: Logitech Wireless Mouse PID:4057 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0003/0003:046D:4057.0004/input/input11
[    1.837853] hid-generic 0003:046D:4057.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4057] on usb-0000:00:14.0-4/input1:1
[    1.982709] logitech-hidpp-device 0003:046D:4057.0004: HID++ 4.5 device connected.
[    3.096959] input: Logitech B330/M330/M331 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0003/0003:046D:4057.0004/input/input15
[    3.097441] logitech-hidpp-device 0003:046D:4057.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech B330/M330/M331] on usb-0000:00:14.0-4/input1:1
[    4.070838] EXT4-fs (nvme0n1p2): mounted filesystem 375e50ee-5b53-4899-a8bb-674f62a54738 ro with ordered data mode. Quota mode: none.
[    4.212884] systemd[1]: Inserted module 'autofs4'
[    4.311616] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    4.311676] systemd[1]: Detected architecture x86-64.
[    4.312829] systemd[1]: Hostname set to <Lenovo-Jc>.
[    4.332737] systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[    4.392314] block nvme0n1: the capability attribute has been deprecated.
[    4.506175] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[    4.552238] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
[    4.582196] systemd[1]: Queued start job for default target Graphical Interface.
[    4.599492] systemd[1]: Created slice Slice /system/modprobe.
[    4.600082] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.600356] systemd[1]: Created slice User and Session Slice.
[    4.600463] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.600721] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.600824] systemd[1]: Reached target User and Group Name Lookups.
[    4.600850] systemd[1]: Reached target Remote File Systems.
[    4.600875] systemd[1]: Reached target Slice Units.
[    4.600906] systemd[1]: Reached target Mounting snaps.
[    4.600947] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.601134] systemd[1]: Listening on Syslog Socket.
[    4.601275] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.601349] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.601581] systemd[1]: Listening on Journal Audit Socket.
[    4.601702] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.601839] systemd[1]: Listening on Journal Socket.
[    4.602001] systemd[1]: Listening on udev Control Socket.
[    4.602125] systemd[1]: Listening on udev Kernel Socket.
[    4.603256] systemd[1]: Mounting Huge Pages File System...
[    4.604363] systemd[1]: Mounting POSIX Message Queue File System...
[    4.606078] systemd[1]: Mounting Kernel Debug File System...
[    4.607432] systemd[1]: Mounting Kernel Trace File System...
[    4.609695] systemd[1]: Starting Journal Service...
[    4.610610] systemd[1]: Starting Set the console keyboard layout...
[    4.611578] systemd[1]: Starting Create List of Static Device Nodes...
[    4.612490] systemd[1]: Starting Load Kernel Module configfs...
[    4.613328] systemd[1]: Starting Load Kernel Module drm...
[    4.614276] systemd[1]: Starting Load Kernel Module efi_pstore...
[    4.615219] systemd[1]: Starting Load Kernel Module fuse...
[    4.615375] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    4.616703] systemd[1]: Starting Load Kernel Modules...
[    4.617105] pstore: Using crash dump compression: deflate
[    4.618075] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.619074] systemd[1]: Starting Coldplug All udev Devices...
[    4.620244] systemd[1]: Mounted Huge Pages File System.
[    4.620775] systemd[1]: Mounted POSIX Message Queue File System.
[    4.620836] systemd[1]: Mounted Kernel Debug File System.
[    4.620896] systemd[1]: Mounted Kernel Trace File System.
[    4.621367] systemd[1]: Finished Create List of Static Device Nodes.
[    4.622130] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.622358] systemd[1]: Finished Load Kernel Module configfs.
[    4.622599] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.622776] systemd[1]: Finished Load Kernel Module fuse.
[    4.624158] systemd[1]: Mounting FUSE Control File System...
[    4.624889] systemd[1]: Mounting Kernel Configuration File System...
[    4.627397] systemd[1]: Mounted FUSE Control File System.
[    4.631259] systemd[1]: Mounted Kernel Configuration File System.
[    4.640102] ACPI: bus type drm_connector registered
[    4.641048] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.641344] systemd[1]: Finished Load Kernel Module drm.
[    4.662564] EXT4-fs (nvme0n1p2): re-mounted 375e50ee-5b53-4899-a8bb-674f62a54738 r/w. Quota mode: none.
[    4.664569] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.665707] systemd[1]: Activating swap /swapfile...
[    4.665952] lp: driver loaded but no devices found
[    4.667325] systemd[1]: Starting Load/Save Random Seed...
[    4.668527] systemd[1]: Starting Create System Users...
[    4.671597] Adding 2097148k swap on /swapfile.  Priority:-2 extents:8 across:60678144k SSFS
[    4.671677] systemd[1]: Activated swap /swapfile.
[    4.671743] systemd[1]: Reached target Swaps.
[    4.673301] pstore: Registered efi_pstore as persistent store backend
[    4.673892] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    4.674105] systemd[1]: Finished Load Kernel Module efi_pstore.
[    4.674224] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.675638] ppdev: user-space parallel port driver
[    4.678430] systemd[1]: Finished Load/Save Random Seed.
[    4.678530] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    4.681861] systemd[1]: Finished Load Kernel Modules.
[    4.682747] systemd[1]: Starting Apply Kernel Variables...
[    4.683056] systemd[1]: Finished Set the console keyboard layout.
[    4.684383] systemd[1]: Finished Create System Users.
[    4.685292] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.693729] systemd[1]: Started Journal Service.
[    4.699080] systemd-journald[300]: Received client request to flush runtime journal.
[    4.706147] systemd-journald[300]: File /var/log/journal/f66d73cdb20644c7998ac24bcd00f6d6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    4.713455] loop0: detected capacity change from 0 to 8
[    4.714986] loop1: detected capacity change from 0 to 19632
[    4.715710] loop2: detected capacity change from 0 to 20128
[    4.716898] loop3: detected capacity change from 0 to 328776
[    4.717717] loop4: detected capacity change from 0 to 328808
[    4.718496] loop5: detected capacity change from 0 to 215872
[    4.719389] loop6: detected capacity change from 0 to 212976
[    4.720571] loop7: detected capacity change from 0 to 130888
[    4.721368] loop8: detected capacity change from 0 to 130880
[    4.727117] loop9: detected capacity change from 0 to 151784
[    4.728566] loop10: detected capacity change from 0 to 151992
[    4.730215] loop11: detected capacity change from 0 to 136272
[    4.731700] loop12: detected capacity change from 0 to 122512
[    4.733393] loop13: detected capacity change from 0 to 123632
[    4.734053] loop14: detected capacity change from 0 to 716176
[    4.735468] loop15: detected capacity change from 0 to 1017816
[    4.736635] loop16: detected capacity change from 0 to 1032504
[    4.737367] loop17: detected capacity change from 0 to 187776
[    4.738465] loop18: detected capacity change from 0 to 231128
[    4.740341] loop19: detected capacity change from 0 to 231128
[    4.741502] loop20: detected capacity change from 0 to 82800
[    4.743328] loop21: detected capacity change from 0 to 80072
[    4.745172] loop22: detected capacity change from 0 to 904
[    4.746309] loop23: detected capacity change from 0 to 113392
[    4.747259] loop24: detected capacity change from 0 to 113632
[    4.901619] Consider using thermal netlink events interface
[    4.966991] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input16
[    4.967057] ideapad_acpi VPC2004:00: Keyboard backlight control not available
[    4.979195] ideapad_acpi VPC2004:00: DYTC_VERSION 4 support may not work. Pass ideapad_laptop.allow_v4_dytc=Y on the kernel commandline to enable
[    4.979200] ideapad_acpi VPC2004:00: DYTC interface is not available
[    4.986146] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.027108] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.035495] dw-apb-uart.2: ttyS4 at MMIO 0x4017002000 (irq = 16, base_baud = 6250000) is a 16550A
[    5.039007] spi-nor spi0.0: gd25q64 (8192 Kbytes)
[    5.041401] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.048522] intel_rapl_common: Found RAPL domain package
[    5.049842] Creating 1 MTD partitions on "0000:00:1f.5":
[    5.049847] 0x000000000000-0x000001800000 : "BIOS"
[    5.049849] mtd: partition "BIOS" extends beyond the end of device "0000:00:1f.5" -- size truncated to 0x800000
[    5.058164] spi-nor spi0.1: XM25QH128A (16384 Kbytes)
[    5.077443] Intel(R) Wireless WiFi driver for Linux
[    5.078604] iwlwifi 0000:00:14.3: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000
[    5.078657] iwlwifi 0000:00:14.3: PCI dev a0f0/0074, rev=0x351, rfid=0x10a100
[    5.088720] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[    5.088751] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[    5.093816] iwlwifi 0000:00:14.3: loaded firmware version 77.2df8986f.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm
[    5.134642] input: MSFT0001:01 06CB:CE2D Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input17
[    5.138602] input: MSFT0001:01 06CB:CE2D Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input18
[    5.138678] hid-multitouch 0018:06CB:CE2D.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 06CB:CE2D] on i2c-MSFT0001:01
[    5.161365] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    5.161376] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.161377] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.161378] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.435772] intel_rapl_msr: PL4 support detected.
[    5.435868] intel_rapl_common: Found RAPL domain package
[    5.435871] intel_rapl_common: Found RAPL domain core
[    5.435872] intel_rapl_common: Found RAPL domain uncore
[    5.436053] cryptd: max_cpu_qlen set to 1000
[    5.445681] Console: switching to colour dummy device 80x25
[    5.446150] i915 0000:00:02.0: vgaarb: deactivate vga console
[    5.446205] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[    5.449226] AVX2 version of gcm_enc/dec engaged.
[    5.449255] AES CTR mode by8 optimization enabled
[    5.460962] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.467211] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[    5.467930] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[    5.472156] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
[    5.472308] thermal thermal_zone7: failed to read out thermal zone (-61)
[    5.482263] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
[    5.482464] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[    5.489922] audit: type=1400 audit(1711122149.740:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=570 comm="apparmor_parser"
[    5.489927] audit: type=1400 audit(1711122149.740:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=570 comm="apparmor_parser"
[    5.490358] audit: type=1400 audit(1711122149.740:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=569 comm="apparmor_parser"
[    5.493308] audit: type=1400 audit(1711122149.744:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu_pro_apt_news" pid=572 comm="apparmor_parser"
[    5.493472] audit: type=1400 audit(1711122149.744:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=577 comm="apparmor_parser"
[    5.493475] audit: type=1400 audit(1711122149.744:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=577 comm="apparmor_parser"
[    5.493477] audit: type=1400 audit(1711122149.744:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=577 comm="apparmor_parser"
[    5.495791] audit: type=1400 audit(1711122149.748:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=579 comm="apparmor_parser"
[    5.496998] audit: type=1400 audit(1711122149.748:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=578 comm="apparmor_parser"
[    5.497140] audit: type=1400 audit(1711122149.748:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=580 comm="apparmor_parser"
[    5.526068] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[    5.526175] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[    5.546229] intel_tcc_cooling: Programmable TCC Offset detected
[    5.568655] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[    5.568763] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[    5.568777] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.569033] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[    5.592349] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[    5.657952] iwlwifi 0000:00:14.3: base HW address: 38:7a:0e:6c:39:69
[    5.702695] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[    6.123067] process '/usr/bin/anydesk' started with executable stack
[    6.204604] Bluetooth: Core ver 2.22
[    6.204629] NET: Registered PF_BLUETOOTH protocol family
[    6.204630] Bluetooth: HCI device and connection manager initialized
[    6.204635] Bluetooth: HCI socket layer initialized
[    6.204637] Bluetooth: L2CAP socket layer initialized
[    6.204640] Bluetooth: SCO socket layer initialized
[    6.254096] mc: Linux media interface: v0.10
[    6.299088] videodev: Linux video capture interface: v2.00
[    6.402932] usbcore: registered new interface driver btusb
[    6.404138] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
[    6.405541] Bluetooth: hci0: Device revision is 2
[    6.405545] Bluetooth: hci0: Secure boot is enabled
[    6.405547] Bluetooth: hci0: OTP lock is enabled
[    6.405548] Bluetooth: hci0: API lock is enabled
[    6.405549] Bluetooth: hci0: Debug lock is disabled
[    6.405551] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    6.438449] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
[    6.438500] Bluetooth: hci0: Boot Address: 0x24800
[    6.438503] Bluetooth: hci0: Firmware Version: 206-22.23
[    6.454306] ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.ETMD], AE_NOT_FOUND (20230331/psargs-330)

[    6.454324] No Local Variables are initialized for Method [_OSC]

[    6.454327] Initialized Arguments for Method [_OSC]:  (4 arguments defined for method invocation)
[    6.454328]   Arg0:   000000009a756eac <Obj>           Buffer(16) 5D A8 3B B2 B7 C8 42 35
[    6.454339]   Arg1:   000000006faf7ed5 <Obj>           Integer 0000000000000001
[    6.454343]   Arg2:   00000000b2981e62 <Obj>           Integer 0000000000000002
[    6.454347]   Arg3:   000000002f5dcb3c <Obj>           Buffer(8) 00 00 00 00 05 00 00 00

[    6.454358] ACPI Error: Aborting method \_SB.IETM._OSC due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    6.475074] usb 3-5: Found UVC 1.10 device Integrated Camera (04f2:b725)
[    6.477492] usbcore: registered new interface driver uvcvideo
[    6.577598] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.577603] Bluetooth: BNEP filters: protocol multicast
[    6.577608] Bluetooth: BNEP socket layer initialized
[    6.601325] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
[    6.604923] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    6.607209] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.607580] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20
[    6.608352] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.615061] fbcon: i915drmfb (fb0) is primary device
[    6.630447] Console: switching to colour frame buffer device 200x56
[    6.648983] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    6.686466] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[    6.732926] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
[    6.732932] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[    6.732964] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[    6.742540] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:0:0-b678a
[    6.742588] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:20:0 Kernel ABI 3:23:0
[    6.742594] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30
[    6.857689] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:0:0-b678a
[    6.857694] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:20:0 Kernel ABI 3:23:0
[    6.878013] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:20:0 Kernel ABI 3:23:0
[    6.878292] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
[    6.915797] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.915805] snd_hda_codec_realtek ehdaudio0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.915807] snd_hda_codec_realtek ehdaudio0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.915809] snd_hda_codec_realtek ehdaudio0D0:    mono: mono_out=0x0
[    6.915810] snd_hda_codec_realtek ehdaudio0D0:    inputs:
[    6.915812] snd_hda_codec_realtek ehdaudio0D0:      Mic=0x19
[    6.965033] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
[    6.965043] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
[    6.965187] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
[    6.965191] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
[    6.965199] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
[    6.965202] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
[    6.965208] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
[    6.965213] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
[    6.965218] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
[    6.965225] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
[    6.965233] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
[    6.965240] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
[    6.965245] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
[    6.965259] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[    6.990057] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input21
[    6.990513] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input22
[    6.990986] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input23
[    6.991224] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input24
[    6.991496] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input25
[    7.800739] loop25: detected capacity change from 0 to 8
[    8.222538] Bluetooth: hci0: Waiting for firmware download to complete
[    8.223459] Bluetooth: hci0: Firmware loaded in 1743166 usecs
[    8.223499] Bluetooth: hci0: Waiting for device to boot
[    8.238465] Bluetooth: hci0: Device booted in 14635 usecs
[    8.238640] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    8.241085] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
[    8.242467] Bluetooth: hci0: Applying Intel DDC parameters completed
[    8.243464] Bluetooth: hci0: Firmware revision 0.4 build 206 week 22 2023
[    8.246284] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[    8.328818] Bluetooth: MGMT ver 1.22
[    8.335378] NET: Registered PF_ALG protocol family
[    9.544217] rfkill: input handler disabled
[   10.402839] wlp0s20f3: authenticate with 38:35:fb:d7:52:f4
[   10.408463] wlp0s20f3: send auth to 38:35:fb:d7:52:f4 (try 1/3)
[   10.436446] wlp0s20f3: authenticated
[   10.438584] wlp0s20f3: associate with 38:35:fb:d7:52:f4 (try 1/3)
[   10.468033] wlp0s20f3: RX AssocResp from 38:35:fb:d7:52:f4 (capab=0x511 status=0 aid=106)
[   10.479150] wlp0s20f3: associated
[   10.563752] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 38:35:fb:d7:52:f4
[   10.661903] kauditd_printk_skb: 83 callbacks suppressed
[   10.661908] audit: type=1326 audit(1711122154.912:95): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=snap.cups.cupsd pid=1524 comm="cupsd" exe="/snap/cups/1024/sbin/cupsd" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7eb644b32a9b code=0x50000
[   17.942504] systemd-journald[300]: File /var/log/journal/f66d73cdb20644c7998ac24bcd00f6d6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   18.149045] Bluetooth: RFCOMM TTY layer initialized
[   18.149053] Bluetooth: RFCOMM socket layer initialized
[   18.149058] Bluetooth: RFCOMM ver 1.11
[   18.268928] rfkill: input handler enabled
[   20.586159] rfkill: input handler disabled
[   22.390717] warning: `NetworkChangeNo' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[   85.593793] audit: type=1400 audit(1711122229.497:96): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=3924 comm="snap-confine" capability=12  capname="net_admin"
[   85.593804] audit: type=1400 audit(1711122229.497:97): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=3924 comm="snap-confine" capability=38  capname="perfmon"
[  255.454840] input: Galaxy Buds2 (D6FF) (AVRCP) as /devices/virtual/input/input26
[ 1949.745258] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[ 1949.894171] usb 3-1: New USB device found, idVendor=152d, idProduct=0579, bcdDevice= 1.00
[ 1949.894181] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1949.894184] usb 3-1: Product: USB Mass Storage
[ 1949.894186] usb 3-1: Manufacturer: JMicron
[ 1949.894189] usb 3-1: SerialNumber: 152D00579000
[ 1950.479434] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1950.479608] scsi host2: usb-storage 3-1:1.0
[ 1950.479757] usbcore: registered new interface driver usb-storage
[ 1950.482481] usbcore: registered new interface driver uas
[ 1951.481679] scsi 2:0:0:0: Direct-Access     JMICRON  JMS579                PQ: 0 ANSI: 6
[ 1951.482062] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1951.483541] sd 2:0:0:0: [sda] Unit Not Ready
[ 1951.483547] sd 2:0:0:0: [sda] Sense Key : Illegal Request [current] 
[ 1951.483551] sd 2:0:0:0: [sda] Add. Sense: Invalid command operation code
[ 1951.487199] sd 2:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[ 1951.487208] sd 2:0:0:0: [sda] Sense Key : Illegal Request [current] 
[ 1951.487214] sd 2:0:0:0: [sda] Add. Sense: Invalid command operation code
[ 1951.487222] sd 2:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[ 1951.487226] sd 2:0:0:0: [sda] 0-byte physical blocks
[ 1951.487698] sd 2:0:0:0: [sda] Write Protect is off
[ 1951.487704] sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 1951.488385] sd 2:0:0:0: [sda] Asking for cache data failed
[ 1951.488394] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 1951.489299] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2000.734007] usb 3-1: USB disconnect, device number 5
[ 2005.821124] usb 3-1: new high-speed USB device number 6 using xhci_hcd
[ 2006.014236] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[ 2006.014246] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2006.014250] usb 3-1: Product: External Disk 3.0
[ 2006.014253] usb 3-1: Manufacturer: JMicron
[ 2006.014255] usb 3-1: SerialNumber: 154410601543
[ 2006.038778] scsi host2: uas
[ 2006.049675] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[ 2006.052858] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2006.063213] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2006.063218] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 2006.063459] sd 2:0:0:0: [sda] Write Protect is off
[ 2006.063461] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[ 2006.063867] sd 2:0:0:0: [sda] Disabling FUA
[ 2006.063869] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2006.064003] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 2006.064004] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 2006.065772]  sda:
[ 2006.065812] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2039.420905] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 2100.488677] usb 3-1: USB disconnect, device number 6
[ 2100.529833] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 2100.789783] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 3530.873443] audit: type=1400 audit(1711125674.769:98): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=6222 comm="snap-confine" capability=12  capname="net_admin"
[ 3530.873451] audit: type=1400 audit(1711125674.769:99): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=6222 comm="snap-confine" capability=38  capname="perfmon"
[ 4607.315510] perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 7369.180306] usb 3-1: new high-speed USB device number 7 using xhci_hcd
[ 7369.374192] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[ 7369.374203] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7369.374206] usb 3-1: Product: External Disk 3.0
[ 7369.374209] usb 3-1: Manufacturer: JMicron
[ 7369.374212] usb 3-1: SerialNumber: 154410601543
[ 7369.399471] scsi host2: uas
[ 7369.410280] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[ 7369.412607] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7369.412924] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 7369.412946] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 7369.413111] sd 2:0:0:0: [sda] Write Protect is off
[ 7369.413114] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[ 7369.413440] sd 2:0:0:0: [sda] Disabling FUA
[ 7369.413443] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7369.413569] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 7369.413573] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 7369.415230]  sda:
[ 7369.415308] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7432.182437] usb 3-1: USB disconnect, device number 7
[ 7432.236738] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 7432.484804] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 7719.674718] usb 3-1: new high-speed USB device number 8 using xhci_hcd
[ 7719.868413] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[ 7719.868424] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7719.868427] usb 3-1: Product: External Disk 3.0
[ 7719.868430] usb 3-1: Manufacturer: JMicron
[ 7719.868432] usb 3-1: SerialNumber: 154410601543
[ 7719.892900] scsi host2: uas
[ 7719.903846] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[ 7719.906897] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7719.917348] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 7719.917352] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 7719.917526] sd 2:0:0:0: [sda] Write Protect is off
[ 7719.917528] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[ 7719.917969] sd 2:0:0:0: [sda] Disabling FUA
[ 7719.917970] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7719.918115] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 7719.918116] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 7719.919819]  sda:
[ 7719.919850] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7799.219943] usb 3-1: USB disconnect, device number 8
[ 7799.251157] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 7799.527159] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 8102.216997] usb 3-1: new high-speed USB device number 9 using xhci_hcd
[ 8102.410328] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[ 8102.410337] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8102.410340] usb 3-1: Product: External Disk 3.0
[ 8102.410343] usb 3-1: Manufacturer: JMicron
[ 8102.410345] usb 3-1: SerialNumber: 154410601543
[ 8102.435082] scsi host2: uas
[ 8102.445953] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[ 8102.449437] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 8102.459989] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 8102.459992] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 8102.460178] sd 2:0:0:0: [sda] Write Protect is off
[ 8102.460179] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[ 8102.460576] sd 2:0:0:0: [sda] Disabling FUA
[ 8102.460577] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8102.460703] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 8102.460705] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 8102.462482]  sda:
[ 8102.462513] sd 2:0:0:0: [sda] Attached SCSI disk
[ 8115.764867]  sda:
[ 8115.950994]  sda:
[ 8176.765650] usb 3-1: USB disconnect, device number 9
[ 8176.805611] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 8177.057598] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10112.456358] usb 3-1: new high-speed USB device number 10 using xhci_hcd
[10112.654463] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10112.654473] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10112.654476] usb 3-1: Product: External Disk 3.0
[10112.654479] usb 3-1: Manufacturer: JMicron
[10112.654481] usb 3-1: SerialNumber: 154410601543
[10112.680000] scsi host2: uas
[10112.690947] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10112.694031] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10112.694421] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10112.694426] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10112.694633] sd 2:0:0:0: [sda] Write Protect is off
[10112.694637] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10112.695010] sd 2:0:0:0: [sda] Disabling FUA
[10112.695014] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10112.695162] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10112.695166] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10112.708169]  sda:
[10112.708205] sd 2:0:0:0: [sda] Attached SCSI disk
[10124.445485]  sda:
[10124.629093]  sda:
[10140.033265]  sda:
[10140.306356]  sda: sda1
[10141.088284]  sda: sda1
[10191.384517] EXT4-fs (sda1): mounted filesystem f70d7286-9722-4871-b9b6-c7b7540aa42e r/w with ordered data mode. Quota mode: none.
[10205.117291] EXT4-fs (sda1): unmounting filesystem f70d7286-9722-4871-b9b6-c7b7540aa42e.
[10211.012439] usb 3-1: USB disconnect, device number 10
[10211.065029] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10211.309032] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10217.981192] usb 3-1: new high-speed USB device number 11 using xhci_hcd
[10218.182430] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10218.182440] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10218.182444] usb 3-1: Product: External Disk 3.0
[10218.182447] usb 3-1: Manufacturer: JMicron
[10218.182449] usb 3-1: SerialNumber: 154410601543
[10218.208276] scsi host2: uas
[10218.219213] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10218.222556] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10218.233072] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10218.233082] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10218.233280] sd 2:0:0:0: [sda] Write Protect is off
[10218.233283] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10218.233695] sd 2:0:0:0: [sda] Disabling FUA
[10218.233697] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10218.233824] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10218.233827] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10218.235869]  sda: sda1
[10218.236002] sd 2:0:0:0: [sda] Attached SCSI disk
[10219.174517] EXT4-fs (sda1): mounted filesystem f70d7286-9722-4871-b9b6-c7b7540aa42e r/w with ordered data mode. Quota mode: none.
[10301.287223] audit: type=1400 audit(1711132445.123:100): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/at-spi/bus_0" pid=16109 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10301.287300] audit: type=1400 audit(1711132445.123:101): apparmor="ALLOWED" operation="file_perm" class="file" profile="libreoffice-soffice" name="/run/user/1000/at-spi/bus_0" pid=16109 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[10301.287303] audit: type=1400 audit(1711132445.123:102): apparmor="ALLOWED" operation="file_perm" class="file" profile="libreoffice-soffice" name="/run/user/1000/at-spi/bus_0" pid=16109 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[10308.493230] audit: type=1400 audit(1711132452.327:103): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=16109 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[10308.493245] audit: type=1400 audit(1711132452.327:104): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/timezoneTypes.res" pid=16109 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[10315.535472] audit: type=1400 audit(1711132459.371:105): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/gvfsd/socket-rzBs5AR7" pid=16109 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10315.628206] audit: type=1400 audit(1711132459.463:106): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/gvfsd/socket-Reim3ZBN" pid=16109 comm="pool-soffice" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10315.630848] audit: type=1400 audit(1711132459.467:107): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/gvfsd/socket-EpempLg3" pid=16109 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10315.665357] audit: type=1400 audit(1711132459.499:108): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/gvfsd/socket-PCqoSAdx" pid=16109 comm="pool-soffice" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10448.951557] EXT4-fs (sda1): unmounting filesystem f70d7286-9722-4871-b9b6-c7b7540aa42e.
[10452.084463] usb 3-1: USB disconnect, device number 11
[10452.099169] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2
[10452.155365] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10452.423220] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10503.111662] usb 3-1: new high-speed USB device number 12 using xhci_hcd
[10503.305754] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10503.305765] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10503.305769] usb 3-1: Product: External Disk 3.0
[10503.305771] usb 3-1: Manufacturer: JMicron
[10503.305774] usb 3-1: SerialNumber: 154410601543
[10503.331250] scsi host2: uas
[10503.342069] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10503.345169] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10503.345343] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10503.345348] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10503.345614] sd 2:0:0:0: [sda] Write Protect is off
[10503.345620] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10503.346151] sd 2:0:0:0: [sda] Disabling FUA
[10503.346155] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10503.346330] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10503.346333] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10503.348821]  sda: sda1
[10503.349663] sd 2:0:0:0: [sda] Attached SCSI disk
[10524.832012] usb 3-1: USB disconnect, device number 12
[10524.832192] usb 3-1: cmd cmplt err -108
[10524.832271] sd 2:0:0:0: [sda] tag#11 uas_zap_pending 0 uas-tag 1 inflight: CMD 
[10524.832273] sd 2:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 00 00 8a b8 00 00 08 00
[10524.832288] sd 2:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=0s
[10524.832290] sd 2:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 00 00 8a b8 00 00 08 00
[10524.832291] I/O error, dev sda, sector 35512 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[10524.832586] device offline error, dev sda, sector 2048 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.832590] Buffer I/O error on dev sda1, logical block 0, lost async page write
[10524.832595] Buffer I/O error on dev sda1, logical block 1, lost async page write
[10524.832596] Buffer I/O error on dev sda1, logical block 2, lost async page write
[10524.832598] Buffer I/O error on dev sda1, logical block 3, lost async page write
[10524.832606] Buffer I/O error on dev sda1, logical block 4, lost async page write
[10524.832607] Buffer I/O error on dev sda1, logical block 5, lost async page write
[10524.832609] Buffer I/O error on dev sda1, logical block 6, lost async page write
[10524.832611] Buffer I/O error on dev sda1, logical block 7, lost async page write
[10524.832613] Buffer I/O error on dev sda1, logical block 8, lost async page write
[10524.832614] Buffer I/O error on dev sda1, logical block 9, lost async page write
[10524.832784] device offline error, dev sda, sector 3072 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.832951] device offline error, dev sda, sector 4096 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833113] device offline error, dev sda, sector 5120 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833257] device offline error, dev sda, sector 6144 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833417] device offline error, dev sda, sector 7168 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833563] device offline error, dev sda, sector 8192 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833707] device offline error, dev sda, sector 9216 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833816] device offline error, dev sda, sector 10240 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.899846] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10525.175849] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10685.941323] usb 3-1: new high-speed USB device number 13 using xhci_hcd
[10686.134323] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10686.134329] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10686.134330] usb 3-1: Product: External Disk 3.0
[10686.134332] usb 3-1: Manufacturer: JMicron
[10686.134333] usb 3-1: SerialNumber: 154410601543
[10686.158131] scsi host2: uas
[10686.168955] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10686.171919] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10686.172220] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10686.172223] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10686.172408] sd 2:0:0:0: [sda] Write Protect is off
[10686.172410] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10686.172767] sd 2:0:0:0: [sda] Disabling FUA
[10686.172769] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10686.172910] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10686.172913] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10686.185530]  sda: sda1
[10686.185644] sd 2:0:0:0: [sda] Attached SCSI disk
[10752.838459] usb 3-1: USB disconnect, device number 13
[10752.893895] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10753.145907] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10756.809934] usb 3-1: new high-speed USB device number 14 using xhci_hcd
[10757.003934] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10757.003944] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10757.003948] usb 3-1: Product: External Disk 3.0
[10757.003951] usb 3-1: Manufacturer: JMicron
[10757.003953] usb 3-1: SerialNumber: 154410601543
[10757.029110] scsi host2: uas
[10757.040159] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10757.043538] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10757.043870] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10757.043876] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10757.044147] sd 2:0:0:0: [sda] Write Protect is off
[10757.044150] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10757.044576] sd 2:0:0:0: [sda] Disabling FUA
[10757.044579] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10757.044725] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10757.044728] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10757.046992]  sda: sda1
[10757.047173] sd 2:0:0:0: [sda] Attached SCSI disk
[10817.911014] usb 3-1: USB disconnect, device number 14
[10817.942403] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10818.190375] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10961.239339] usb 3-1: new high-speed USB device number 15 using xhci_hcd
[10961.432856] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10961.432864] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10961.432866] usb 3-1: Product: External Disk 3.0
[10961.432869] usb 3-1: Manufacturer: JMicron
[10961.432871] usb 3-1: SerialNumber: 154410601543
[10961.457925] scsi host2: uas
[10961.468825] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10961.472513] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10961.472808] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10961.472812] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10961.472992] sd 2:0:0:0: [sda] Write Protect is off
[10961.472994] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10961.473481] sd 2:0:0:0: [sda] Disabling FUA
[10961.473484] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10961.473598] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10961.473600] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10961.475371]  sda: sda1
[10961.475520] sd 2:0:0:0: [sda] Attached SCSI disk
[10990.156465] usb 3-1: USB disconnect, device number 15
[10990.195739] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10990.439760] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12218.852255] usb 3-1: new high-speed USB device number 16 using xhci_hcd
[12219.046113] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12219.046123] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12219.046126] usb 3-1: Product: External Disk 3.0
[12219.046129] usb 3-1: Manufacturer: JMicron
[12219.046131] usb 3-1: SerialNumber: 154410601543
[12219.070245] scsi host2: uas
[12219.081159] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12219.084522] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12219.084734] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12219.084738] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12219.085134] sd 2:0:0:0: [sda] Write Protect is off
[12219.085137] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12219.085550] sd 2:0:0:0: [sda] Disabling FUA
[12219.085552] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12219.085700] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12219.085703] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12219.087492]  sda: sda1
[12219.087572] sd 2:0:0:0: [sda] Attached SCSI disk
[12245.385870]  sda: sda1
[12295.591513] usb 3-1: USB disconnect, device number 16
[12295.621010] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12295.888785] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12305.784942] usb 3-1: new high-speed USB device number 17 using xhci_hcd
[12305.982045] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12305.982054] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12305.982058] usb 3-1: Product: External Disk 3.0
[12305.982061] usb 3-1: Manufacturer: JMicron
[12305.982063] usb 3-1: SerialNumber: 154410601543
[12306.006534] scsi host2: uas
[12306.017473] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12306.020800] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12306.021373] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12306.021380] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12306.021623] sd 2:0:0:0: [sda] Write Protect is off
[12306.021626] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12306.022130] sd 2:0:0:0: [sda] Disabling FUA
[12306.022132] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12306.022285] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12306.022287] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12306.024435]  sda: sda1
[12306.024533] sd 2:0:0:0: [sda] Attached SCSI disk
[12327.693377] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[12520.832496] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[12524.486212] usb 3-1: USB disconnect, device number 17
[12524.530151] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12524.794049] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12546.842240] usb 3-1: new high-speed USB device number 18 using xhci_hcd
[12546.992376] usb 3-1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[12546.992386] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12546.992389] usb 3-1: Product: Ultra
[12546.992392] usb 3-1: Manufacturer: SanDisk
[12546.992394] usb 3-1: SerialNumber: 0101f7c1fef9cf388d0e571590632eb366387670a081107855176ef678cb44eb68040000000000000000000070a1aa89ff0f580081558107a6262545
[12546.995329] usb-storage 3-1:1.0: USB Mass Storage device detected
[12546.995705] scsi host2: usb-storage 3-1:1.0
[12548.012186] scsi 2:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[12548.012680] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12548.013211] sd 2:0:0:0: [sda] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB)
[12548.014420] sd 2:0:0:0: [sda] Write Protect is off
[12548.014430] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[12548.015022] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[12548.037422]  sda: sda1
[12548.037569] sd 2:0:0:0: [sda] Attached SCSI removable disk
[12574.952634] usb 3-1: USB disconnect, device number 18
[12590.662389] usb 3-1: new high-speed USB device number 19 using xhci_hcd
[12590.852023] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12590.852031] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12590.852034] usb 3-1: Product: External Disk 3.0
[12590.852037] usb 3-1: Manufacturer: JMicron
[12590.852039] usb 3-1: SerialNumber: 154410601543
[12590.876666] scsi host2: uas
[12590.887567] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12590.891171] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12590.901768] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12590.901776] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12590.902039] sd 2:0:0:0: [sda] Write Protect is off
[12590.902044] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12590.902461] sd 2:0:0:0: [sda] Disabling FUA
[12590.902467] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12590.902631] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12590.902635] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12590.904813]  sda: sda1
[12590.904926] sd 2:0:0:0: [sda] Attached SCSI disk
[12591.834747] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[12648.240765] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[12651.689046] usb 3-1: USB disconnect, device number 19
[12651.722906] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12651.990787] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12655.430862] usb 3-1: new high-speed USB device number 20 using xhci_hcd
[12655.579952] usb 3-1: New USB device found, idVendor=152d, idProduct=0579, bcdDevice= 1.00
[12655.579963] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12655.579966] usb 3-1: Product: USB Mass Storage
[12655.579969] usb 3-1: Manufacturer: JMicron
[12655.579972] usb 3-1: SerialNumber: 152D00579000
[12655.581745] usb-storage 3-1:1.0: USB Mass Storage device detected
[12655.582007] scsi host2: usb-storage 3-1:1.0
[12656.587530] scsi 2:0:0:0: Direct-Access     JMICRON  JMS579                PQ: 0 ANSI: 6
[12656.588035] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12656.590106] sd 2:0:0:0: [sda] Unit Not Ready
[12656.590114] sd 2:0:0:0: [sda] Sense Key : Illegal Request [current] 
[12656.590120] sd 2:0:0:0: [sda] Add. Sense: Invalid command operation code
[12656.593768] sd 2:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[12656.593771] sd 2:0:0:0: [sda] Sense Key : Illegal Request [current] 
[12656.593773] sd 2:0:0:0: [sda] Add. Sense: Invalid command operation code
[12656.593776] sd 2:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[12656.593778] sd 2:0:0:0: [sda] 0-byte physical blocks
[12656.594062] sd 2:0:0:0: [sda] Write Protect is off
[12656.594064] sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00
[12656.594390] sd 2:0:0:0: [sda] Asking for cache data failed
[12656.594394] sd 2:0:0:0: [sda] Assuming drive cache: write through
[12656.595599] sd 2:0:0:0: [sda] Attached SCSI disk
[12664.829093] usb 3-1: USB disconnect, device number 20
[12679.391046] usb 3-1: new high-speed USB device number 21 using xhci_hcd
[12679.584445] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12679.584456] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12679.584459] usb 3-1: Product: External Disk 3.0
[12679.584462] usb 3-1: Manufacturer: JMicron
[12679.584465] usb 3-1: SerialNumber: 154410601543
[12679.610136] scsi host2: uas
[12679.621078] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12679.624415] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12679.624741] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12679.624749] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12679.624983] sd 2:0:0:0: [sda] Write Protect is off
[12679.624987] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12679.625452] sd 2:0:0:0: [sda] Disabling FUA
[12679.625456] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12679.625601] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12679.625605] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12679.627603]  sda: sda1
[12679.627760] sd 2:0:0:0: [sda] Attached SCSI disk
[12680.556264] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[12707.308665] usb 3-1: USB disconnect, device number 21
[12707.309651] blk_print_req_error: 40 callbacks suppressed
[12707.309656] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2
[12707.309695] device offline error, dev sda, sector 2072 op 0x1:(WRITE) flags 0x103000 phys_seg 1 prio class 2
[12707.309713] buffer_io_error: 4173 callbacks suppressed
[12707.309716] Buffer I/O error on dev sda1, logical block 3, lost async page write
[12707.312626] EXT4-fs (sda1): shut down requested (2)
[12707.312636] Aborting journal on device sda1-8.
[12707.312648] Buffer I/O error on dev sda1, logical block 30441472, lost sync page write
[12707.312655] JBD2: I/O error when updating journal superblock for sda1-8.
[12707.356198] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[12707.379056] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12707.627097] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12742.723387] usb 3-1: new high-speed USB device number 22 using xhci_hcd
[12742.917662] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12742.917672] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12742.917676] usb 3-1: Product: External Disk 3.0
[12742.917679] usb 3-1: Manufacturer: JMicron
[12742.917681] usb 3-1: SerialNumber: 154410601543
[12742.943633] scsi host2: uas
[12742.954579] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12742.957947] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12742.968529] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12742.968531] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12742.968738] sd 2:0:0:0: [sda] Write Protect is off
[12742.968739] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12742.969097] sd 2:0:0:0: [sda] Disabling FUA
[12742.969098] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12742.969236] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12742.969237] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12742.970819]  sda: sda1
[12742.970877] sd 2:0:0:0: [sda] Attached SCSI disk
[12743.923077] EXT4-fs (sda1): recovery complete
[12743.934848] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[12762.659895] usb 3-1: USB disconnect, device number 22
[12762.660613] device offline error, dev sda, sector 243535064 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 2
[12762.660631] Aborting journal on device sda1-8.
[12762.660647] device offline error, dev sda, sector 243533824 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[12762.660653] device offline error, dev sda, sector 243533824 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[12762.660658] Buffer I/O error on dev sda1, logical block 30441472, lost sync page write
[12762.660670] JBD2: I/O error when updating journal superblock for sda1-8.
[12762.665853] EXT4-fs (sda1): shut down requested (2)
[12762.677364] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[12762.707398] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12762.987435] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[13128.270041] input: Galaxy Buds2 (D6FF) (AVRCP) as /devices/virtual/input/input27
[20780.094186] usb 3-4: USB disconnect, device number 2
[20784.617342] usb 3-1: new full-speed USB device number 23 using xhci_hcd
[20784.772007] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[20784.772018] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20784.772021] usb 3-1: Product: USB Receiver
[20784.772024] usb 3-1: Manufacturer: Logitech
[20784.775428] logitech-djreceiver 0003:046D:C52F.0005: hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[20784.835427] logitech-djreceiver 0003:046D:C52F.0006: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[20784.894562] logitech-djreceiver 0003:046D:C52F.0006: device of type eQUAD step 4 DJ (0x04) connected on slot 1
[20784.902785] input: Logitech B330/M330/M331 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C52F.0006/0003:046D:4057.0007/input/input28
[20784.903056] logitech-hidpp-device 0003:046D:4057.0007: input,hidraw3: USB HID v1.11 Mouse [Logitech B330/M330/M331] on usb-0000:00:14.0-1/input1:1
[20802.993597] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[20803.014520] usb 4-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[20803.014530] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20803.014534] usb 4-1: Product: External Disk 3.0
[20803.014537] usb 4-1: Manufacturer: JMicron
[20803.014539] usb 4-1: SerialNumber: 154410601543
[20803.020784] scsi host2: uas
[20803.022040] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[20803.024497] sd 2:0:0:0: Attached scsi generic sg0 type 0
[20803.024777] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[20803.024782] sd 2:0:0:0: [sda] 4096-byte physical blocks
[20803.024943] sd 2:0:0:0: [sda] Write Protect is off
[20803.024946] sd 2:0:0:0: [sda] Mode Sense: 53 00 00 08
[20803.025253] sd 2:0:0:0: [sda] Disabling FUA
[20803.025256] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20803.025467] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[20803.025474] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[20803.027198]  sda: sda1
[20803.027406] sd 2:0:0:0: [sda] Attached SCSI disk
[20803.828070] EXT4-fs (sda1): recovery complete
[20803.829247] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[20804.048967] logitech-hidpp-device 0003:046D:4057.0007: HID++ 4.5 device connected.
[20816.777529] usb 4-1: USB disconnect, device number 2
[20816.793501] device offline error, dev sda, sector 125847808 op 0x1:(WRITE) flags 0x4000 phys_seg 128 prio class 2
[20816.793525] device offline error, dev sda, sector 125848832 op 0x1:(WRITE) flags 0x0 phys_seg 128 prio class 2
[20816.793531] device offline error, dev sda, sector 125849856 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[20816.793536] device offline error, dev sda, sector 125850880 op 0x1:(WRITE) flags 0x800 phys_seg 128 prio class 2
[20816.793542] device offline error, dev sda, sector 2072 op 0x1:(WRITE) flags 0x103000 phys_seg 1 prio class 2
[20816.793547] Buffer I/O error on dev sda1, logical block 3, lost async page write
[20816.793600] device offline error, dev sda, sector 243535120 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 2
[20816.793615] Aborting journal on device sda1-8.
[20816.793628] device offline error, dev sda, sector 243533824 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[20816.793632] device offline error, dev sda, sector 243533824 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[20816.793636] Buffer I/O error on dev sda1, logical block 30441472, lost sync page write
[20816.793642] JBD2: I/O error when updating journal superblock for sda1-8.
[20816.795440] EXT4-fs (sda1): shut down requested (2)
[20816.812630] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[20816.853477] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[20817.125489] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK

jcvilleneuve · Le 22/03/2024, à 23:40

Ah mais le dd n'était pas monté. J'ai changé de port USB et voilà.

[sudo] Mot de passe de jean-christophe : 
[    0.000000] microcode: updated early: 0x9a -> 0xb4, date = 2023-09-07
[    0.000000] Linux version 6.5.0-26-generic (buildd@lcy02-amd64-051) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #26~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue Mar 12 10:22:43 UTC 2 (Ubuntu 6.5.0-26.26~22.04.1-generic 6.5.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic root=UUID=375e50ee-5b53-4899-a8bb-674f62a54738 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000039f98fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000039f99000-0x000000003a898fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003a899000-0x00000000434aefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000434af000-0x00000000452fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000452ff000-0x0000000045b2efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000045b2f000-0x0000000045bfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000045bff000-0x0000000045bfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000045c00000-0x000000004f3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff400000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002b0bfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.7 by INSYDE Corp.
[    0.000000] efi: ACPI=0x45bfe000 ACPI 2.0=0x45bfe014 SMBIOS=0x439e0000 SMBIOS 3.0=0x439de000 ESRT=0x3fd1a018 MOKvar=0x43989000 RNG=0x45b8a018 
[    0.000000] random: crng init done
[    0.000000] efi: Not removing mem72: MMIO range=[0xfe010000-0xfe010fff] (4KB) from e820 map
[    0.000000] efi: Remove mem74: MMIO range=[0xff400000-0xffffffff] (12MB) from e820 map
[    0.000000] e820: remove [mem 0xff400000-0xffffffff] reserved
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: LENOVO 82H9/LNVNB161216, BIOS GGCN35WW 04/28/2022
[    0.000000] tsc: Detected 3000.000 MHz processor
[    0.000000] tsc: Detected 2995.200 MHz TSC
[    0.000004] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000006] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000010] last_pfn = 0x2b0c00 max_arch_pfn = 0x400000000
[    0.000013] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000015] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000482] last_pfn = 0x45c00 max_arch_pfn = 0x400000000
[    0.008086] esrt: Reserving ESRT space from 0x000000003fd1a018 to 0x000000003fd1a0c8.
[    0.008090] e820: update [mem 0x3fd1a000-0x3fd1afff] usable ==> reserved
[    0.008102] Using GB pages for direct mapping
[    0.008304] secureboot: Secure boot disabled
[    0.008304] RAMDISK: [mem 0x33c13000-0x37f07fff]
[    0.008308] ACPI: Early table checksum verification disabled
[    0.008311] ACPI: RSDP 0x0000000045BFE014 000024 (v02 LENOVO)
[    0.008314] ACPI: XSDT 0x0000000045BD2188 000114 (v01 LENOVO CB-01    00000002      01000013)
[    0.008319] ACPI: FACP 0x0000000045BD6000 00010C (v06 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008323] ACPI: DSDT 0x0000000045B93000 03E7F8 (v02 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008326] ACPI: FACS 0x0000000045AC3000 000040
[    0.008328] ACPI: UEFI 0x0000000045B2E000 000236 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008330] ACPI: SSDT 0x0000000045BFA000 00255C (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008332] ACPI: SSDT 0x0000000045BF4000 0059B9 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008334] ACPI: SSDT 0x0000000045BF2000 001E37 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008337] ACPI: SSDT 0x0000000045BEE000 003314 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008339] ACPI: SSDT 0x0000000045BE2000 00B1AA (v02 INTEL  TcssSsdt 00001000 INTL 20160422)
[    0.008341] ACPI: MSDM 0x0000000045BE1000 000055 (v03 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008343] ACPI: NHLT 0x0000000045BDF000 001871 (v00 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008345] ACPI: SSDT 0x0000000045BDE000 000DDE (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008348] ACPI: LPIT 0x0000000045BDD000 0000CC (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008350] ACPI: WSMT 0x0000000045BDC000 000028 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008352] ACPI: SSDT 0x0000000045BDB000 000B70 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008354] ACPI: SSDT 0x0000000045BDA000 00012A (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008357] ACPI: DBGP 0x0000000045BD9000 000034 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008359] ACPI: DBG2 0x0000000045BD8000 000054 (v00 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008361] ACPI: ECDT 0x0000000045BD7000 000069 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008363] ACPI: HPET 0x0000000045BD5000 000038 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008365] ACPI: APIC 0x0000000045BD4000 00012C (v03 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008367] ACPI: MCFG 0x0000000045BD3000 00003C (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008369] ACPI: SSDT 0x0000000045B91000 00144C (v02 LENOVO CB-01    00000002      01000013)
[    0.008372] ACPI: DMAR 0x0000000045BFD000 000088 (v02 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008374] ACPI: UEFI 0x0000000045AC0000 00063A (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008376] ACPI: UEFI 0x0000000045ABF000 00005C (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008378] ACPI: SSDT 0x0000000045B90000 00005C (v02 LENOVO CB-01    00000002 INTL 20160527)
[    0.008380] ACPI: SSDT 0x0000000045B8F000 000851 (v02 LENOVO CB-01    00000002 INTL 20160422)
[    0.008382] ACPI: SSDT 0x0000000045B8E000 0000F8 (v01 LENOVO CB-01    00000002 INTL 20160422)
[    0.008385] ACPI: FPDT 0x0000000045B8D000 000044 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008387] ACPI: BGRT 0x0000000045B8C000 000038 (v01 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008389] ACPI: PTDT 0x0000000045B8B000 000CFE (v00 LENOVO CB-01    00000002 ACPI 00040000)
[    0.008391] ACPI: Reserving FACP table memory at [mem 0x45bd6000-0x45bd610b]
[    0.008392] ACPI: Reserving DSDT table memory at [mem 0x45b93000-0x45bd17f7]
[    0.008392] ACPI: Reserving FACS table memory at [mem 0x45ac3000-0x45ac303f]
[    0.008393] ACPI: Reserving UEFI table memory at [mem 0x45b2e000-0x45b2e235]
[    0.008393] ACPI: Reserving SSDT table memory at [mem 0x45bfa000-0x45bfc55b]
[    0.008394] ACPI: Reserving SSDT table memory at [mem 0x45bf4000-0x45bf99b8]
[    0.008394] ACPI: Reserving SSDT table memory at [mem 0x45bf2000-0x45bf3e36]
[    0.008395] ACPI: Reserving SSDT table memory at [mem 0x45bee000-0x45bf1313]
[    0.008395] ACPI: Reserving SSDT table memory at [mem 0x45be2000-0x45bed1a9]
[    0.008396] ACPI: Reserving MSDM table memory at [mem 0x45be1000-0x45be1054]
[    0.008396] ACPI: Reserving NHLT table memory at [mem 0x45bdf000-0x45be0870]
[    0.008397] ACPI: Reserving SSDT table memory at [mem 0x45bde000-0x45bdeddd]
[    0.008397] ACPI: Reserving LPIT table memory at [mem 0x45bdd000-0x45bdd0cb]
[    0.008398] ACPI: Reserving WSMT table memory at [mem 0x45bdc000-0x45bdc027]
[    0.008398] ACPI: Reserving SSDT table memory at [mem 0x45bdb000-0x45bdbb6f]
[    0.008399] ACPI: Reserving SSDT table memory at [mem 0x45bda000-0x45bda129]
[    0.008399] ACPI: Reserving DBGP table memory at [mem 0x45bd9000-0x45bd9033]
[    0.008400] ACPI: Reserving DBG2 table memory at [mem 0x45bd8000-0x45bd8053]
[    0.008400] ACPI: Reserving ECDT table memory at [mem 0x45bd7000-0x45bd7068]
[    0.008401] ACPI: Reserving HPET table memory at [mem 0x45bd5000-0x45bd5037]
[    0.008401] ACPI: Reserving APIC table memory at [mem 0x45bd4000-0x45bd412b]
[    0.008402] ACPI: Reserving MCFG table memory at [mem 0x45bd3000-0x45bd303b]
[    0.008402] ACPI: Reserving SSDT table memory at [mem 0x45b91000-0x45b9244b]
[    0.008403] ACPI: Reserving DMAR table memory at [mem 0x45bfd000-0x45bfd087]
[    0.008404] ACPI: Reserving UEFI table memory at [mem 0x45ac0000-0x45ac0639]
[    0.008404] ACPI: Reserving UEFI table memory at [mem 0x45abf000-0x45abf05b]
[    0.008405] ACPI: Reserving SSDT table memory at [mem 0x45b90000-0x45b9005b]
[    0.008405] ACPI: Reserving SSDT table memory at [mem 0x45b8f000-0x45b8f850]
[    0.008406] ACPI: Reserving SSDT table memory at [mem 0x45b8e000-0x45b8e0f7]
[    0.008406] ACPI: Reserving FPDT table memory at [mem 0x45b8d000-0x45b8d043]
[    0.008407] ACPI: Reserving BGRT table memory at [mem 0x45b8c000-0x45b8c037]
[    0.008407] ACPI: Reserving PTDT table memory at [mem 0x45b8b000-0x45b8bcfd]
[    0.008661] No NUMA configuration found
[    0.008661] Faking a node at [mem 0x0000000000000000-0x00000002b0bfffff]
[    0.008667] NODE_DATA(0) allocated [mem 0x2b0bd5000-0x2b0bfffff]
[    0.008775] Zone ranges:
[    0.008775]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008777]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008778]   Normal   [mem 0x0000000100000000-0x00000002b0bfffff]
[    0.008779]   Device   empty
[    0.008779] Movable zone start for each node
[    0.008780] Early memory node ranges
[    0.008781]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008782]   node   0: [mem 0x0000000000100000-0x0000000039f98fff]
[    0.008782]   node   0: [mem 0x000000003a899000-0x00000000434aefff]
[    0.008783]   node   0: [mem 0x0000000045bff000-0x0000000045bfffff]
[    0.008783]   node   0: [mem 0x0000000100000000-0x00000002b0bfffff]
[    0.008785] Initmem setup node 0 [mem 0x0000000000001000-0x00000002b0bfffff]
[    0.008788] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008803] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.010254] On node 0, zone DMA32: 2304 pages in unavailable ranges
[    0.010310] On node 0, zone DMA32: 10064 pages in unavailable ranges
[    0.018955] On node 0, zone Normal: 9216 pages in unavailable ranges
[    0.019124] On node 0, zone Normal: 29696 pages in unavailable ranges
[    0.019148] Reserving Intel graphics memory at [mem 0x4b800000-0x4f3fffff]
[    0.019440] ACPI: PM-Timer IO Port: 0x1808
[    0.019446] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.019448] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.019448] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.019449] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.019449] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.019449] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.019450] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.019450] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.019451] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.019451] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.019452] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.019452] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.019453] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.019453] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.019454] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.019454] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.019489] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.019492] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.019493] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.019496] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.019497] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.019503] e820: update [mem 0x3fbfc000-0x3fca4fff] usable ==> reserved
[    0.019509] TSC deadline timer available
[    0.019510] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.019518] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.019519] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.019520] PM: hibernation: Registered nosave memory: [mem 0x39f99000-0x3a898fff]
[    0.019521] PM: hibernation: Registered nosave memory: [mem 0x3fbfc000-0x3fca4fff]
[    0.019522] PM: hibernation: Registered nosave memory: [mem 0x3fd1a000-0x3fd1afff]
[    0.019523] PM: hibernation: Registered nosave memory: [mem 0x434af000-0x452fefff]
[    0.019523] PM: hibernation: Registered nosave memory: [mem 0x452ff000-0x45b2efff]
[    0.019524] PM: hibernation: Registered nosave memory: [mem 0x45b2f000-0x45bfefff]
[    0.019525] PM: hibernation: Registered nosave memory: [mem 0x45c00000-0x4f3fffff]
[    0.019525] PM: hibernation: Registered nosave memory: [mem 0x4f400000-0xfe00ffff]
[    0.019526] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
[    0.019526] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff]
[    0.019527] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.019527] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
[    0.019528] [mem 0x4f400000-0xfe00ffff] available for PCI devices
[    0.019529] Booting paravirtualized kernel on bare hardware
[    0.019531] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.019536] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.019769] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288
[    0.019773] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152
[    0.019774] pcpu-alloc: [0] 0 1 2 3 
[    0.019786] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic root=UUID=375e50ee-5b53-4899-a8bb-674f62a54738 ro quiet splash vt.handoff=7
[    0.019843] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic", will be passed to user space.
[    0.020520] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.020850] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.020901] Fallback order for Node 0: 0 
[    0.020904] Built 1 zonelists, mobility grouping on.  Total pages: 2013649
[    0.020905] Policy zone: Normal
[    0.020909] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.020917] software IO TLB: area num 4.
[    0.042443] Memory: 7768960K/8183096K available (20480K kernel code, 4266K rwdata, 13188K rodata, 4808K init, 17380K bss, 413876K reserved, 0K cma-reserved)
[    0.042586] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.042607] ftrace: allocating 55231 entries in 216 pages
[    0.049474] ftrace: allocated 216 pages with 4 groups
[    0.050144] Dynamic Preempt: voluntary
[    0.050165] rcu: Preemptible hierarchical RCU implementation.
[    0.050166] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.050167] 	Trampoline variant of Tasks RCU enabled.
[    0.050167] 	Rude variant of Tasks RCU enabled.
[    0.050167] 	Tracing variant of Tasks RCU enabled.
[    0.050168] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.050168] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.052023] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.052318] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.052535] Console: colour dummy device 80x25
[    0.052537] printk: console [tty0] enabled
[    0.052566] ACPI: Core revision 20230331
[    0.052772] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.052773] APIC: Switch to symmetric I/O mode setup
[    0.052775] DMAR: Host address width 39
[    0.052776] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.052780] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 69e2ff0505e
[    0.052782] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.052787] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.052789] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f3fffff
[    0.052791] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.052793] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.052793] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.054405] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.054408] x2apic enabled
[    0.054425] Switched APIC routing to cluster x2apic.
[    0.059036] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns
[    0.059044] Calibrating delay loop (skipped), value calculated using timer frequency.. 5990.40 BogoMIPS (lpj=11980800)
[    0.059070] CPU0: Thermal monitoring enabled (TM1)
[    0.059072] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.059183] process: using mwait in idle threads
[    0.059185] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.059186] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.059189] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.059191] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.059191] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.059192] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.059193] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.059194] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.059197] GDS: Mitigation: Microcode
[    0.059203] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.059204] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.059204] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.059205] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    0.059206] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    0.059206] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    0.059207] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.059208] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.059209] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    0.059209] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    0.059210] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    0.059211] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    0.059212] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[    0.063040] Freeing SMP alternatives memory: 44K
[    0.063040] pid_max: default: 32768 minimum: 301
[    0.063040] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity
[    0.063040] landlock: Up and running.
[    0.063040] Yama: becoming mindful.
[    0.063040] AppArmor: AppArmor initialized
[    0.063040] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.063040] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.063040] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz (family: 0x6, model: 0x8c, stepping: 0x1)
[    0.063040] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.063040] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.063040] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.063040] Performance Events: PEBS fmt4+-baseline,  AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.063040] ... version:                5
[    0.063040] ... bit width:              48
[    0.063040] ... generic registers:      8
[    0.063040] ... value mask:             0000ffffffffffff
[    0.063040] ... max period:             00007fffffffffff
[    0.063040] ... fixed-purpose events:   4
[    0.063040] ... event mask:             0001000f000000ff
[    0.063040] signal: max sigframe size: 3632
[    0.063040] Estimated ratio of average max frequency by base frequency (times 1024): 1399
[    0.063040] rcu: Hierarchical SRCU implementation.
[    0.063040] rcu: 	Max phase no-delay instances is 1000.
[    0.063040] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.063040] smp: Bringing up secondary CPUs ...
[    0.063040] smpboot: x86: Booting SMP configuration:
[    0.063040] .... node  #0, CPUs:      #1 #2 #3
[    0.063149] smp: Brought up 1 node, 4 CPUs
[    0.063149] smpboot: Max logical packages: 1
[    0.063149] smpboot: Total of 4 processors activated (23961.60 BogoMIPS)
[    0.066253] devtmpfs: initialized
[    0.066253] x86/mm: Memory block size: 128MB
[    0.067410] ACPI: PM: Registering ACPI NVS region [mem 0x452ff000-0x45b2efff] (8585216 bytes)
[    0.067410] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.067410] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.067410] pinctrl core: initialized pinctrl subsystem
[    0.067410] PM: RTC time: 15:42:23, date: 2024-03-22
[    0.067705] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.067831] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.067896] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.067960] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.067967] audit: initializing netlink subsys (disabled)
[    0.067972] audit: type=2000 audit(1711122143.008:1): state=initialized audit_enabled=0 res=1
[    0.067972] thermal_sys: Registered thermal governor 'fair_share'
[    0.067972] thermal_sys: Registered thermal governor 'bang_bang'
[    0.067972] thermal_sys: Registered thermal governor 'step_wise'
[    0.067972] thermal_sys: Registered thermal governor 'user_space'
[    0.067972] thermal_sys: Registered thermal governor 'power_allocator'
[    0.067972] EISA bus registered
[    0.067972] cpuidle: using governor ladder
[    0.067972] cpuidle: using governor menu
[    0.067972] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.067972] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.067972] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.067972] PCI: not using MMCONFIG
[    0.067972] PCI: Using configuration type 1 for base access
[    0.067972] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.067972] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.067972] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.067972] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.067972] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.067972] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.067972] ACPI: Added _OSI(Module Device)
[    0.067972] ACPI: Added _OSI(Processor Device)
[    0.067972] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.067972] ACPI: Added _OSI(Processor Aggregator Device)
[    0.113746] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0], AE_NOT_FOUND (20230331/dswload2-162)
[    0.113753] fbcon: Taking over console
[    0.113761] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230331/psobject-220)
[    0.113764] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[    0.114094] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.114942] ACPI: EC: EC started
[    0.114942] ACPI: EC: interrupt blocked
[    0.115393] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.115394] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.121684] ACPI: Dynamic OEM Table Load:
[    0.121693] ACPI: SSDT 0xFFFF9CFFC11CDC00 0001C6 (v02 PmRef  Cpu0Psd  00003000 INTL 20160422)
[    0.122330] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.123011] ACPI: Dynamic OEM Table Load:
[    0.123016] ACPI: SSDT 0xFFFF9CFFC1190400 000386 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.123764] ACPI: Dynamic OEM Table Load:
[    0.123769] ACPI: SSDT 0xFFFF9CFFC132E000 000689 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.124593] ACPI: Dynamic OEM Table Load:
[    0.124597] ACPI: SSDT 0xFFFF9CFFC1193C00 000266 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.125471] ACPI: Dynamic OEM Table Load:
[    0.125476] ACPI: SSDT 0xFFFF9CFFC0DD8000 0008E7 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.126329] ACPI: Dynamic OEM Table Load:
[    0.126333] ACPI: SSDT 0xFFFF9CFFC132D000 00048A (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.127115] ACPI: Dynamic OEM Table Load:
[    0.127119] ACPI: SSDT 0xFFFF9CFFC132C800 0004D4 (v02 PmRef  ApPsd    00003000 INTL 20160422)
[    0.127897] ACPI: Dynamic OEM Table Load:
[    0.127901] ACPI: SSDT 0xFFFF9CFFC1329800 00048A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.129534] ACPI: Interpreter enabled
[    0.129576] ACPI: PM: (supports S0 S4 S5)
[    0.129577] ACPI: Using IOAPIC for interrupt routing
[    0.130522] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.131206] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource
[    0.131213] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.131214] PCI: Using E820 reservations for host bridge windows
[    0.131609] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.132097] ACPI: \_SB_.PC00.PEG0.PCRP: New power resource
[    0.132122] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.DGPV], AE_NOT_FOUND (20230331/psargs-330)

[    0.132128] No Local Variables are initialized for Method [_ON_]

[    0.132129] No Arguments are initialized for method [_ON_]

[    0.132130] ACPI Error: Aborting method \_SB.PC00.PEG0.PCRP._ON due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    0.134891] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTPR: New power resource
[    0.135922] ACPI: \_SB_.PC00.PAUD: New power resource
[    0.142540] ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource
[    0.142638] ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource
[    0.142734] ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource
[    0.144594] ACPI: \_SB_.PC00.I2C0.PXTC: New power resource
[    0.146188] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[    0.146419] ACPI: \_SB_.PC00.TBT0: New power resource
[    0.146461] ACPI: \_SB_.PC00.TBT1: New power resource
[    0.154512] ACPI: \PIN_: New power resource
[    0.154766] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
[    0.154771] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.156464] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.159800] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
[    0.159801] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.162822] PCI host bridge to bus 0000:00
[    0.162823] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.162825] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.162826] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.162827] pci_bus 0000:00: root bus resource [mem 0x4f400000-0xbfffffff window]
[    0.162828] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.162829] pci_bus 0000:00: root bus resource [bus 00-e0]
[    0.162857] pci 0000:00:00.0: [8086:9a04] type 00 class 0x060000
[    0.162964] pci 0000:00:02.0: [8086:9a78] type 00 class 0x030000
[    0.162972] pci 0000:00:02.0: reg 0x10: [mem 0x6002000000-0x6002ffffff 64bit]
[    0.162977] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.162980] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.162993] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.162994] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.162996] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.163020] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[    0.163021] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[    0.163026] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[    0.163026] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[    0.163171] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000
[    0.163187] pci 0000:00:04.0: reg 0x10: [mem 0x6003200000-0x600321ffff 64bit]
[    0.163444] pci 0000:00:0a.0: [8086:9a0d] type 00 class 0x118000
[    0.163451] pci 0000:00:0a.0: reg 0x10: [mem 0x6003230000-0x6003237fff 64bit]
[    0.163471] pci 0000:00:0a.0: enabling Extended Tags
[    0.163556] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330
[    0.163568] pci 0000:00:0d.0: reg 0x10: [mem 0x6003220000-0x600322ffff 64bit]
[    0.163620] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[    0.163961] pci 0000:00:0e.0: [8086:9a0b] type 00 class 0x010400
[    0.163973] pci 0000:00:0e.0: reg 0x10: [mem 0x6000000000-0x6001ffffff 64bit]
[    0.163978] pci 0000:00:0e.0: reg 0x18: [mem 0x50000000-0x51ffffff]
[    0.163990] pci 0000:00:0e.0: reg 0x20: [mem 0x6003100000-0x60031fffff 64bit]
[    0.164119] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330
[    0.164139] pci 0000:00:14.0: reg 0x10: [mem 0x52000000-0x5200ffff 64bit]
[    0.164224] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.164555] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000
[    0.164577] pci 0000:00:14.2: reg 0x10: [mem 0x6003240000-0x6003243fff 64bit]
[    0.164593] pci 0000:00:14.2: reg 0x18: [mem 0x600324a000-0x600324afff 64bit]
[    0.164736] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000
[    0.164759] pci 0000:00:14.3: reg 0x10: [mem 0x600323c000-0x600323ffff 64bit]
[    0.164893] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.165150] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000
[    0.165177] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.165580] pci 0000:00:15.1: [8086:a0e9] type 00 class 0x0c8000
[    0.165607] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.165956] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000
[    0.165978] pci 0000:00:16.0: reg 0x10: [mem 0x6003247000-0x6003247fff 64bit]
[    0.166063] pci 0000:00:16.0: PME# supported from D3hot
[    0.166386] pci 0000:00:17.0: [8086:a0d3] type 00 class 0x010601
[    0.166403] pci 0000:00:17.0: reg 0x10: [mem 0x52010000-0x52011fff]
[    0.166414] pci 0000:00:17.0: reg 0x14: [mem 0x52014000-0x520140ff]
[    0.166424] pci 0000:00:17.0: reg 0x18: [io  0x3080-0x3087]
[    0.166435] pci 0000:00:17.0: reg 0x1c: [io  0x3088-0x308b]
[    0.166445] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    0.166456] pci 0000:00:17.0: reg 0x24: [mem 0x52013000-0x520137ff]
[    0.166506] pci 0000:00:17.0: PME# supported from D3hot
[    0.167094] pci 0000:00:1e.0: [8086:a0a8] type 00 class 0x078000
[    0.167122] pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.167577] pci 0000:00:1e.3: [8086:a0ab] type 00 class 0x0c8000
[    0.167604] pci 0000:00:1e.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.167937] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100
[    0.168235] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100
[    0.168277] pci 0000:00:1f.3: reg 0x10: [mem 0x6003238000-0x600323bfff 64bit]
[    0.168331] pci 0000:00:1f.3: reg 0x20: [mem 0x6003000000-0x60030fffff 64bit]
[    0.168436] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.168776] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500
[    0.168800] pci 0000:00:1f.4: reg 0x10: [mem 0x6003244000-0x60032440ff 64bit]
[    0.168830] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.169036] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000
[    0.169055] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.176492] Low-power S0 idle used by default for system suspend
[    0.177561] ACPI: EC: interrupt unblocked
[    0.177562] ACPI: EC: event unblocked
[    0.177578] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.177579] ACPI: EC: GPE=0x6e
[    0.177580] ACPI: \_SB_.PC00.LPCB.EC0_: Boot ECDT EC initialization complete
[    0.177581] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
[    0.179062] iommu: Default domain type: Translated
[    0.179062] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.179148] SCSI subsystem initialized
[    0.179151] libata version 3.00 loaded.
[    0.179151] ACPI: bus type USB registered
[    0.179151] usbcore: registered new interface driver usbfs
[    0.179151] usbcore: registered new interface driver hub
[    0.179151] usbcore: registered new device driver usb
[    0.179151] pps_core: LinuxPPS API ver. 1 registered
[    0.179151] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.179151] PTP clock support registered
[    0.179151] EDAC MC: Ver: 3.0.0
[    0.179366] efivars: Registered efivars operations
[    0.179370] NetLabel: Initializing
[    0.179370] NetLabel:  domain hash size = 128
[    0.179370] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.179370] NetLabel:  unlabeled traffic allowed by default
[    0.179370] mctp: management component transport protocol core
[    0.179370] NET: Registered PF_MCTP protocol family
[    0.179370] PCI: Using ACPI for IRQ routing
[    0.199017] PCI: pci_cache_line_size set to 64 bytes
[    0.199170] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[    0.199302] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.199303] e820: reserve RAM buffer [mem 0x39f99000-0x3bffffff]
[    0.199304] e820: reserve RAM buffer [mem 0x3fbfc000-0x3fffffff]
[    0.199304] e820: reserve RAM buffer [mem 0x3fd1a000-0x3fffffff]
[    0.199305] e820: reserve RAM buffer [mem 0x434af000-0x43ffffff]
[    0.199306] e820: reserve RAM buffer [mem 0x45c00000-0x47ffffff]
[    0.199306] e820: reserve RAM buffer [mem 0x2b0c00000-0x2b3ffffff]
[    0.203057] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.203057] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.203057] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.203057] vgaarb: loaded
[    0.204137] clocksource: Switched to clocksource tsc-early
[    0.209444] VFS: Disk quotas dquot_6.6.0
[    0.209452] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.209543] AppArmor: AppArmor Filesystem Enabled
[    0.209579] pnp: PnP ACPI init
[    0.209894] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.209896] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.210005] system 00:01: [io  0x1854-0x1857] has been reserved
[    0.210449] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    0.210466] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    0.210467] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.210468] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.210469] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
[    0.210471] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.210472] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.210473] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.211007] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.211009] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.211010] system 00:04: [mem 0xfe04c000-0xfe04ffff] has been reserved
[    0.211011] system 00:04: [mem 0xfe050000-0xfe0affff] has been reserved
[    0.211012] system 00:04: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[    0.211013] system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.211014] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.211014] system 00:04: [mem 0xfd000000-0xfd68ffff] has been reserved
[    0.211017] system 00:04: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.211018] system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.211251] system 00:05: [io  0x2000-0x20fe] has been reserved
[    0.211565] pnp: PnP ACPI: found 7 devices
[    0.216773] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.216813] NET: Registered PF_INET protocol family
[    0.216895] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.217920] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.217943] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.217984] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.218160] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.218310] TCP: Hash tables configured (established 65536 bind 65536)
[    0.218362] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.218391] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.218405] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.218433] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.218437] NET: Registered PF_XDP protocol family
[    0.218442] pci_bus 0000:00: max bus depth: 0 pci_try_num: 1
[    0.218449] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[    0.218452] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[    0.218454] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[    0.218516] pci 0000:00:15.1: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[    0.218531] pci 0000:00:1e.0: BAR 0: assigned [mem 0x4017002000-0x4017002fff 64bit]
[    0.218594] pci 0000:00:1e.3: BAR 0: assigned [mem 0x4017003000-0x4017003fff 64bit]
[    0.218652] resource: avoiding allocation from e820 entry [mem 0x0009f000-0x000fffff]
[    0.218654] pci 0000:00:1f.5: BAR 0: assigned [mem 0x4f400000-0x4f400fff]
[    0.218660] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.218661] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.218662] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.218663] pci_bus 0000:00: resource 7 [mem 0x4f400000-0xbfffffff window]
[    0.218664] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.220487] PCI: CLS 64 bytes, default 64
[    0.220501] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.220502] software IO TLB: mapped [mem 0x000000003b24f000-0x000000003f24f000] (64MB)
[    0.220521] Trying to unpack rootfs image as initramfs...
[    0.220550] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
[    0.220552] caller __uncore_imc_init_box+0xcb/0x150 mapping multiple BARs
[    0.230585] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns
[    0.230600] clocksource: Switched to clocksource tsc
[    0.230630] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.230919] Initialise system trusted keyrings
[    0.230926] Key type blacklist registered
[    0.230947] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.230957] zbud: loaded
[    0.231080] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.231127] fuse: init (API version 7.38)
[    0.231215] integrity: Platform Keyring initialized
[    0.231219] integrity: Machine keyring initialized
[    0.235774] Key type asymmetric registered
[    0.235775] Asymmetric key parser 'x509' registered
[    0.235786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.235809] io scheduler mq-deadline registered
[    0.235941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.235973] efifb: probing for efifb
[    0.235984] efifb: showing boot graphics
[    0.237180] efifb: framebuffer at 0x4000000000, using 5628k, total 5625k
[    0.237182] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    0.237183] efifb: scrolling: redraw
[    0.237184] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.237244] Console: switching to colour frame buffer device 200x56
[    0.238709] fb0: EFI VGA frame buffer device
[    0.238909] Monitor-Mwait will be used to enter C-1 state
[    0.238912] Monitor-Mwait will be used to enter C-2 state
[    0.238913] Monitor-Mwait will be used to enter C-3 state
[    0.238915] ACPI: \_SB_.PR00: Found 3 idle states
[    0.239178] ACPI: AC: AC Adapter [ADP0] (off-line)
[    0.239220] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.239233] ACPI: button: Lid Switch [LID0]
[    0.239250] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.239261] ACPI: button: Power Button [PWRB]
[    0.240044] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.241583] hpet_acpi_add: no address or irqs in _CRS
[    0.241606] Linux agpgart interface v0.103
[    0.242365] loop: module loaded
[    0.242523] tun: Universal TUN/TAP device driver, 1.6
[    0.242542] PPP generic driver version 2.4.2
[    0.242618] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.242620] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.243393] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.243447] mousedev: PS/2 mouse device common for all mice
[    0.243527] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.244385] rtc_cmos rtc_cmos: registered as rtc0
[    0.244562] rtc_cmos rtc_cmos: setting system clock to 2024-03-22T15:42:24 UTC (1711122144)
[    0.244588] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.244593] i2c_dev: i2c /dev entries driver
[    0.244693] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.244698] device-mapper: uevent: version 1.0.3
[    0.244720] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    0.244729] platform eisa.0: Probing EISA bus 0
[    0.244730] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.244731] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.244731] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.244732] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.244733] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.244734] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.244734] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.244735] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.244736] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.244736] platform eisa.0: EISA: Detected 0 cards
[    0.244738] intel_pstate: Intel P-state driver initializing
[    0.244919] intel_pstate: HWP enabled
[    0.245045] ledtrig-cpu: registered to indicate activity on CPUs
[    0.245158] intel_pmc_core INT33A1:00:  initialized
[    0.245222] drop_monitor: Initializing network drop monitor service
[    0.252720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.254444] NET: Registered PF_INET6 protocol family
[    0.334823] ACPI: battery: Slot [BAT0] (battery present)
[    0.442280] Freeing initrd memory: 68564K
[    0.445857] Segment Routing with IPv6
[    0.445868] In-situ OAM (IOAM) with IPv6
[    0.445890] NET: Registered PF_PACKET protocol family
[    0.445910] Key type dns_resolver registered
[    0.446224] microcode: Microcode Update Driver: v2.2.
[    0.446251] resctrl: L2 allocation detected
[    0.446256] IPI shorthand broadcast: enabled
[    0.447140] sched_clock: Marking stable (440002132, 6542848)->(470136134, -23591154)
[    0.447337] registered taskstats version 1
[    0.447455] Loading compiled-in X.509 certificates
[    0.447857] Loaded X.509 cert 'Build time autogenerated kernel key: 64d8c1ccb61f14b3afd1bd02d3c86dda564ef290'
[    0.448242] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.448598] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.448600] blacklist: Loading compiled-in revocation X.509 certificates
[    0.448611] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.448620] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[    0.448628] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[    0.448636] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[    0.448646] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[    0.448656] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[    0.448665] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[    0.448673] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[    0.449723] Key type .fscrypt registered
[    0.449724] Key type fscrypt-provisioning registered
[    0.451206] Key type encrypted registered
[    0.451208] AppArmor: AppArmor sha1 policy hashing enabled
[    0.453067] integrity: Loading X.509 certificate: UEFI:db
[    0.453106] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.453107] integrity: Loading X.509 certificate: UEFI:db
[    0.453120] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.453121] integrity: Loading X.509 certificate: UEFI:db
[    0.453130] integrity: Loaded X.509 cert 'GGV1415G2ITL3-141517ITL6: 1fa615ea4c52809d4610564911163db0'
[    0.453131] integrity: Loading X.509 certificate: UEFI:db
[    0.453132] integrity: Problem loading X.509 certificate -65
[    0.453149] integrity: Error adding keys to platform keyring UEFI:db
[    0.457005] ima: No TPM chip found, activating TPM-bypass!
[    0.457010] Loading compiled-in module X.509 certificates
[    0.457457] Loaded X.509 cert 'Build time autogenerated kernel key: 64d8c1ccb61f14b3afd1bd02d3c86dda564ef290'
[    0.457459] ima: Allocated hash algorithm: sha1
[    0.457464] ima: No architecture policies found
[    0.457481] evm: Initialising EVM extended attributes:
[    0.457481] evm: security.selinux
[    0.457482] evm: security.SMACK64
[    0.457483] evm: security.SMACK64EXEC
[    0.457483] evm: security.SMACK64TRANSMUTE
[    0.457484] evm: security.SMACK64MMAP
[    0.457484] evm: security.apparmor
[    0.457485] evm: security.ima
[    0.457485] evm: security.capability
[    0.457486] evm: HMAC attrs: 0x1
[    0.457716] PM:   Magic number: 0:909:740
[    0.459957] RAS: Correctable Errors collector initialized.
[    0.459993] clk: Disabling unused clocks
[    0.465101] Freeing unused decrypted memory: 2036K
[    0.465537] Freeing unused kernel image (initmem) memory: 4808K
[    0.486709] Write protecting the kernel read-only data: 34816k
[    0.487148] Freeing unused kernel image (rodata/data gap) memory: 1148K
[    0.501873] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.501878] Run /init as init process
[    0.501879]   with arguments:
[    0.501880]     /init
[    0.501881]     splash
[    0.501882]   with environment:
[    0.501882]     HOME=/
[    0.501883]     TERM=linux
[    0.501883]     BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic
[    0.572629] hid: raw HID events driver (C) Jiri Kosina
[    0.579507] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    0.579514] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[    0.579688] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[    0.579692] pci_bus 10000:e0: root bus resource [bus e0-ff]
[    0.579694] pci_bus 10000:e0: root bus resource [mem 0x50000000-0x51ffffff]
[    0.579696] pci_bus 10000:e0: root bus resource [mem 0x6003102000-0x60031fffff 64bit]
[    0.579707] pci 10000:e0:1c.0: [8086:09ab] type 00 class 0x088000
[    0.579777] pci 10000:e0:1c.4: [8086:a0bc] type 01 class 0x060400
[    0.579881] pci 10000:e0:1c.4: PME# supported from D0 D3hot D3cold
[    0.579927] pci 10000:e0:1c.4: PTM enabled (root), 4ns granularity
[    0.580022] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.580090] pci 10000:e1:00.0: [8086:f1aa] type 00 class 0x010802
[    0.580120] pci 10000:e1:00.0: reg 0x10: [mem 0x50000000-0x50003fff 64bit]
[    0.580322] pci 10000:e1:00.0: reg 0x1ac: [mem 0x00000000-0x00003fff 64bit]
[    0.580323] pci 10000:e1:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
[    0.580573] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    0.580615] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.580619] pci 10000:e0:1c.4:   bridge window [io  0x0000-0x0fff]
[    0.580622] pci 10000:e0:1c.4:   bridge window [mem 0x50000000-0x500fffff]
[    0.580630] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.580763] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[    0.580766] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[    0.580768] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.580798] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    0.580800] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.580801] usb usb1: Product: xHCI Host Controller
[    0.580801] usb usb1: Manufacturer: Linux 6.5.0-26-generic xhci-hcd
[    0.580803] usb usb1: SerialNumber: 0000:00:0d.0
[    0.580878] hub 1-0:1.0: USB hub found
[    0.580886] hub 1-0:1.0: 1 port detected
[    0.580956] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    0.580957] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.580958] usb usb2: Product: xHCI Host Controller
[    0.580959] usb usb2: Manufacturer: Linux 6.5.0-26-generic xhci-hcd
[    0.580960] usb usb2: SerialNumber: 0000:00:0d.0
[    0.581004] hub 2-0:1.0: USB hub found
[    0.581012] hub 2-0:1.0: 4 ports detected
[    0.581296] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.581299] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.582386] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    0.582742] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.582745] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.582747] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.582777] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    0.582779] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.582780] usb usb3: Product: xHCI Host Controller
[    0.582781] usb usb3: Manufacturer: Linux 6.5.0-26-generic xhci-hcd
[    0.582782] usb usb3: SerialNumber: 0000:00:14.0
[    0.582907] hub 3-0:1.0: USB hub found
[    0.582925] hub 3-0:1.0: 12 ports detected
[    0.583345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    0.583347] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.583348] usb usb4: Product: xHCI Host Controller
[    0.583349] usb usb4: Manufacturer: Linux 6.5.0-26-generic xhci-hcd
[    0.583350] usb usb4: SerialNumber: 0000:00:14.0
[    0.583398] hub 4-0:1.0: USB hub found
[    0.583407] hub 4-0:1.0: 4 ports detected
[    0.583656] usb: port power management may be unreliable
[    0.594129] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    0.608631] ahci 0000:00:17.0: version 3.0
[    0.610679] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.610750] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.611884] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    0.613914] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    0.617121] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.617126] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds 
[    0.620952] scsi host0: ahci
[    0.621410] scsi host1: ahci
[    0.621475] ata1: SATA max UDMA/133 abar m2048@0x52013000 port 0x52013100 irq 143
[    0.621481] ata2: SATA max UDMA/133 abar m2048@0x52013000 port 0x52013180 irq 143
[    0.634425] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[    0.636183] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    0.657018] intel-lpss 0000:00:1e.0: enabling device (0004 -> 0006)
[    0.657352] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    0.668593] intel-lpss 0000:00:1e.3: enabling device (0004 -> 0006)
[    0.669058] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    0.774796] pci 10000:e0:1c.4: bridge window [mem 0x00100000-0x001fffff] to [bus e1] add_size 100000 add_align 100000
[    0.774812] pci 10000:e0:1c.4: BAR 14: assigned [mem 0x50000000-0x501fffff]
[    0.774816] pci 10000:e0:1c.4: BAR 13: no space for [io  size 0x1000]
[    0.774819] pci 10000:e0:1c.4: BAR 13: failed to assign [io  size 0x1000]
[    0.774823] pci 10000:e0:1c.4: BAR 13: no space for [io  size 0x1000]
[    0.774825] pci 10000:e0:1c.4: BAR 13: failed to assign [io  size 0x1000]
[    0.774831] pci 10000:e1:00.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit]
[    0.774851] pci 10000:e1:00.0: BAR 7: assigned [mem 0x50004000-0x50023fff 64bit]
[    0.774861] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.774869] pci 10000:e0:1c.4:   bridge window [mem 0x50000000-0x501fffff]
[    0.774929] pci 10000:e1:00.0: VMD: Default LTR value set by driver
[    0.774996] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    0.774999] pcieport 10000:e0:1c.4: PCI INT A: no GSI
[    0.775194] pcieport 10000:e0:1c.4: PME: Signaling with IRQ 145
[    0.775406] vmd 0000:00:0e.0: Bound to PCI domain 10000
[    0.814665] i801_smbus 0000:00:1f.4: Transaction timeout
[    0.816792] i801_smbus 0000:00:1f.4: Failed terminating the transaction
[    0.816866] i801_smbus 0000:00:1f.4: SMBus is busy, can't use it!
[    0.846611] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[    0.937077] ata1: SATA link down (SStatus 4 SControl 300)
[    0.939122] ata2: SATA link down (SStatus 4 SControl 300)
[    0.954963] input: MSFT0001:01 06CB:CE2D Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input3
[    0.955115] input: MSFT0001:01 06CB:CE2D Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input4
[    0.955238] hid-generic 0018:06CB:CE2D.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 06CB:CE2D] on i2c-MSFT0001:01
[    0.965063] nvme nvme0: pci function 10000:e1:00.0
[    0.965329] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    0.965333] nvme 10000:e1:00.0: PCI INT A: not connected
[    0.972944] nvme nvme0: 4/0/0 default/read/poll queues
[    0.976430]  nvme0n1: p1 p2
[    0.997217] usb 3-4: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[    0.997225] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.997228] usb 3-4: Product: USB Receiver
[    0.997230] usb 3-4: Manufacturer: Logitech
[    1.126681] usb 3-5: new high-speed USB device number 3 using xhci_hcd
[    1.277276] usb 3-5: New USB device found, idVendor=04f2, idProduct=b725, bcdDevice=27.36
[    1.277285] usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.277289] usb 3-5: Product: Integrated Camera
[    1.277292] usb 3-5: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.277294] usb 3-5: SerialNumber: 0001
[    1.406661] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    1.557190] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    1.557200] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.568885] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C52F.0002/input/input6
[    1.568965] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    1.570069] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0003/input/input7
[    1.626962] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    1.627059] usbcore: registered new interface driver usbhid
[    1.627062] usbhid: USB HID core driver
[    1.683232] logitech-djreceiver 0003:046D:C52F.0002: hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    1.775735] logitech-djreceiver 0003:046D:C52F.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    1.836527] logitech-djreceiver 0003:046D:C52F.0003: device of type eQUAD step 4 DJ (0x04) connected on slot 1
[    1.837368] input: Logitech Wireless Mouse PID:4057 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0003/0003:046D:4057.0004/input/input10
[    1.837635] input: Logitech Wireless Mouse PID:4057 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0003/0003:046D:4057.0004/input/input11
[    1.837853] hid-generic 0003:046D:4057.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4057] on usb-0000:00:14.0-4/input1:1
[    1.982709] logitech-hidpp-device 0003:046D:4057.0004: HID++ 4.5 device connected.
[    3.096959] input: Logitech B330/M330/M331 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0003/0003:046D:4057.0004/input/input15
[    3.097441] logitech-hidpp-device 0003:046D:4057.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech B330/M330/M331] on usb-0000:00:14.0-4/input1:1
[    4.070838] EXT4-fs (nvme0n1p2): mounted filesystem 375e50ee-5b53-4899-a8bb-674f62a54738 ro with ordered data mode. Quota mode: none.
[    4.212884] systemd[1]: Inserted module 'autofs4'
[    4.311616] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    4.311676] systemd[1]: Detected architecture x86-64.
[    4.312829] systemd[1]: Hostname set to <Lenovo-Jc>.
[    4.332737] systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[    4.392314] block nvme0n1: the capability attribute has been deprecated.
[    4.506175] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[    4.552238] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
[    4.582196] systemd[1]: Queued start job for default target Graphical Interface.
[    4.599492] systemd[1]: Created slice Slice /system/modprobe.
[    4.600082] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.600356] systemd[1]: Created slice User and Session Slice.
[    4.600463] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.600721] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.600824] systemd[1]: Reached target User and Group Name Lookups.
[    4.600850] systemd[1]: Reached target Remote File Systems.
[    4.600875] systemd[1]: Reached target Slice Units.
[    4.600906] systemd[1]: Reached target Mounting snaps.
[    4.600947] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.601134] systemd[1]: Listening on Syslog Socket.
[    4.601275] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.601349] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.601581] systemd[1]: Listening on Journal Audit Socket.
[    4.601702] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.601839] systemd[1]: Listening on Journal Socket.
[    4.602001] systemd[1]: Listening on udev Control Socket.
[    4.602125] systemd[1]: Listening on udev Kernel Socket.
[    4.603256] systemd[1]: Mounting Huge Pages File System...
[    4.604363] systemd[1]: Mounting POSIX Message Queue File System...
[    4.606078] systemd[1]: Mounting Kernel Debug File System...
[    4.607432] systemd[1]: Mounting Kernel Trace File System...
[    4.609695] systemd[1]: Starting Journal Service...
[    4.610610] systemd[1]: Starting Set the console keyboard layout...
[    4.611578] systemd[1]: Starting Create List of Static Device Nodes...
[    4.612490] systemd[1]: Starting Load Kernel Module configfs...
[    4.613328] systemd[1]: Starting Load Kernel Module drm...
[    4.614276] systemd[1]: Starting Load Kernel Module efi_pstore...
[    4.615219] systemd[1]: Starting Load Kernel Module fuse...
[    4.615375] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    4.616703] systemd[1]: Starting Load Kernel Modules...
[    4.617105] pstore: Using crash dump compression: deflate
[    4.618075] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.619074] systemd[1]: Starting Coldplug All udev Devices...
[    4.620244] systemd[1]: Mounted Huge Pages File System.
[    4.620775] systemd[1]: Mounted POSIX Message Queue File System.
[    4.620836] systemd[1]: Mounted Kernel Debug File System.
[    4.620896] systemd[1]: Mounted Kernel Trace File System.
[    4.621367] systemd[1]: Finished Create List of Static Device Nodes.
[    4.622130] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.622358] systemd[1]: Finished Load Kernel Module configfs.
[    4.622599] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.622776] systemd[1]: Finished Load Kernel Module fuse.
[    4.624158] systemd[1]: Mounting FUSE Control File System...
[    4.624889] systemd[1]: Mounting Kernel Configuration File System...
[    4.627397] systemd[1]: Mounted FUSE Control File System.
[    4.631259] systemd[1]: Mounted Kernel Configuration File System.
[    4.640102] ACPI: bus type drm_connector registered
[    4.641048] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.641344] systemd[1]: Finished Load Kernel Module drm.
[    4.662564] EXT4-fs (nvme0n1p2): re-mounted 375e50ee-5b53-4899-a8bb-674f62a54738 r/w. Quota mode: none.
[    4.664569] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.665707] systemd[1]: Activating swap /swapfile...
[    4.665952] lp: driver loaded but no devices found
[    4.667325] systemd[1]: Starting Load/Save Random Seed...
[    4.668527] systemd[1]: Starting Create System Users...
[    4.671597] Adding 2097148k swap on /swapfile.  Priority:-2 extents:8 across:60678144k SSFS
[    4.671677] systemd[1]: Activated swap /swapfile.
[    4.671743] systemd[1]: Reached target Swaps.
[    4.673301] pstore: Registered efi_pstore as persistent store backend
[    4.673892] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    4.674105] systemd[1]: Finished Load Kernel Module efi_pstore.
[    4.674224] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.675638] ppdev: user-space parallel port driver
[    4.678430] systemd[1]: Finished Load/Save Random Seed.
[    4.678530] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    4.681861] systemd[1]: Finished Load Kernel Modules.
[    4.682747] systemd[1]: Starting Apply Kernel Variables...
[    4.683056] systemd[1]: Finished Set the console keyboard layout.
[    4.684383] systemd[1]: Finished Create System Users.
[    4.685292] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.693729] systemd[1]: Started Journal Service.
[    4.699080] systemd-journald[300]: Received client request to flush runtime journal.
[    4.706147] systemd-journald[300]: File /var/log/journal/f66d73cdb20644c7998ac24bcd00f6d6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    4.713455] loop0: detected capacity change from 0 to 8
[    4.714986] loop1: detected capacity change from 0 to 19632
[    4.715710] loop2: detected capacity change from 0 to 20128
[    4.716898] loop3: detected capacity change from 0 to 328776
[    4.717717] loop4: detected capacity change from 0 to 328808
[    4.718496] loop5: detected capacity change from 0 to 215872
[    4.719389] loop6: detected capacity change from 0 to 212976
[    4.720571] loop7: detected capacity change from 0 to 130888
[    4.721368] loop8: detected capacity change from 0 to 130880
[    4.727117] loop9: detected capacity change from 0 to 151784
[    4.728566] loop10: detected capacity change from 0 to 151992
[    4.730215] loop11: detected capacity change from 0 to 136272
[    4.731700] loop12: detected capacity change from 0 to 122512
[    4.733393] loop13: detected capacity change from 0 to 123632
[    4.734053] loop14: detected capacity change from 0 to 716176
[    4.735468] loop15: detected capacity change from 0 to 1017816
[    4.736635] loop16: detected capacity change from 0 to 1032504
[    4.737367] loop17: detected capacity change from 0 to 187776
[    4.738465] loop18: detected capacity change from 0 to 231128
[    4.740341] loop19: detected capacity change from 0 to 231128
[    4.741502] loop20: detected capacity change from 0 to 82800
[    4.743328] loop21: detected capacity change from 0 to 80072
[    4.745172] loop22: detected capacity change from 0 to 904
[    4.746309] loop23: detected capacity change from 0 to 113392
[    4.747259] loop24: detected capacity change from 0 to 113632
[    4.901619] Consider using thermal netlink events interface
[    4.966991] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input16
[    4.967057] ideapad_acpi VPC2004:00: Keyboard backlight control not available
[    4.979195] ideapad_acpi VPC2004:00: DYTC_VERSION 4 support may not work. Pass ideapad_laptop.allow_v4_dytc=Y on the kernel commandline to enable
[    4.979200] ideapad_acpi VPC2004:00: DYTC interface is not available
[    4.986146] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.027108] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.035495] dw-apb-uart.2: ttyS4 at MMIO 0x4017002000 (irq = 16, base_baud = 6250000) is a 16550A
[    5.039007] spi-nor spi0.0: gd25q64 (8192 Kbytes)
[    5.041401] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.048522] intel_rapl_common: Found RAPL domain package
[    5.049842] Creating 1 MTD partitions on "0000:00:1f.5":
[    5.049847] 0x000000000000-0x000001800000 : "BIOS"
[    5.049849] mtd: partition "BIOS" extends beyond the end of device "0000:00:1f.5" -- size truncated to 0x800000
[    5.058164] spi-nor spi0.1: XM25QH128A (16384 Kbytes)
[    5.077443] Intel(R) Wireless WiFi driver for Linux
[    5.078604] iwlwifi 0000:00:14.3: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000
[    5.078657] iwlwifi 0000:00:14.3: PCI dev a0f0/0074, rev=0x351, rfid=0x10a100
[    5.088720] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[    5.088751] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[    5.093816] iwlwifi 0000:00:14.3: loaded firmware version 77.2df8986f.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm
[    5.134642] input: MSFT0001:01 06CB:CE2D Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input17
[    5.138602] input: MSFT0001:01 06CB:CE2D Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:06CB:CE2D.0001/input/input18
[    5.138678] hid-multitouch 0018:06CB:CE2D.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 06CB:CE2D] on i2c-MSFT0001:01
[    5.161365] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    5.161376] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.161377] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.161378] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.435772] intel_rapl_msr: PL4 support detected.
[    5.435868] intel_rapl_common: Found RAPL domain package
[    5.435871] intel_rapl_common: Found RAPL domain core
[    5.435872] intel_rapl_common: Found RAPL domain uncore
[    5.436053] cryptd: max_cpu_qlen set to 1000
[    5.445681] Console: switching to colour dummy device 80x25
[    5.446150] i915 0000:00:02.0: vgaarb: deactivate vga console
[    5.446205] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[    5.449226] AVX2 version of gcm_enc/dec engaged.
[    5.449255] AES CTR mode by8 optimization enabled
[    5.460962] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.467211] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[    5.467930] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[    5.472156] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
[    5.472308] thermal thermal_zone7: failed to read out thermal zone (-61)
[    5.482263] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
[    5.482464] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[    5.489922] audit: type=1400 audit(1711122149.740:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=570 comm="apparmor_parser"
[    5.489927] audit: type=1400 audit(1711122149.740:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=570 comm="apparmor_parser"
[    5.490358] audit: type=1400 audit(1711122149.740:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=569 comm="apparmor_parser"
[    5.493308] audit: type=1400 audit(1711122149.744:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu_pro_apt_news" pid=572 comm="apparmor_parser"
[    5.493472] audit: type=1400 audit(1711122149.744:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=577 comm="apparmor_parser"
[    5.493475] audit: type=1400 audit(1711122149.744:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=577 comm="apparmor_parser"
[    5.493477] audit: type=1400 audit(1711122149.744:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=577 comm="apparmor_parser"
[    5.495791] audit: type=1400 audit(1711122149.748:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=579 comm="apparmor_parser"
[    5.496998] audit: type=1400 audit(1711122149.748:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=578 comm="apparmor_parser"
[    5.497140] audit: type=1400 audit(1711122149.748:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=580 comm="apparmor_parser"
[    5.526068] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[    5.526175] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[    5.546229] intel_tcc_cooling: Programmable TCC Offset detected
[    5.568655] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[    5.568763] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[    5.568777] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.569033] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[    5.592349] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[    5.657952] iwlwifi 0000:00:14.3: base HW address: 38:7a:0e:6c:39:69
[    5.702695] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[    6.123067] process '/usr/bin/anydesk' started with executable stack
[    6.204604] Bluetooth: Core ver 2.22
[    6.204629] NET: Registered PF_BLUETOOTH protocol family
[    6.204630] Bluetooth: HCI device and connection manager initialized
[    6.204635] Bluetooth: HCI socket layer initialized
[    6.204637] Bluetooth: L2CAP socket layer initialized
[    6.204640] Bluetooth: SCO socket layer initialized
[    6.254096] mc: Linux media interface: v0.10
[    6.299088] videodev: Linux video capture interface: v2.00
[    6.402932] usbcore: registered new interface driver btusb
[    6.404138] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
[    6.405541] Bluetooth: hci0: Device revision is 2
[    6.405545] Bluetooth: hci0: Secure boot is enabled
[    6.405547] Bluetooth: hci0: OTP lock is enabled
[    6.405548] Bluetooth: hci0: API lock is enabled
[    6.405549] Bluetooth: hci0: Debug lock is disabled
[    6.405551] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    6.438449] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi
[    6.438500] Bluetooth: hci0: Boot Address: 0x24800
[    6.438503] Bluetooth: hci0: Firmware Version: 206-22.23
[    6.454306] ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.ETMD], AE_NOT_FOUND (20230331/psargs-330)

[    6.454324] No Local Variables are initialized for Method [_OSC]

[    6.454327] Initialized Arguments for Method [_OSC]:  (4 arguments defined for method invocation)
[    6.454328]   Arg0:   000000009a756eac <Obj>           Buffer(16) 5D A8 3B B2 B7 C8 42 35
[    6.454339]   Arg1:   000000006faf7ed5 <Obj>           Integer 0000000000000001
[    6.454343]   Arg2:   00000000b2981e62 <Obj>           Integer 0000000000000002
[    6.454347]   Arg3:   000000002f5dcb3c <Obj>           Buffer(8) 00 00 00 00 05 00 00 00

[    6.454358] ACPI Error: Aborting method \_SB.IETM._OSC due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[    6.475074] usb 3-5: Found UVC 1.10 device Integrated Camera (04f2:b725)
[    6.477492] usbcore: registered new interface driver uvcvideo
[    6.577598] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.577603] Bluetooth: BNEP filters: protocol multicast
[    6.577608] Bluetooth: BNEP socket layer initialized
[    6.601325] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
[    6.604923] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    6.607209] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.607580] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20
[    6.608352] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.615061] fbcon: i915drmfb (fb0) is primary device
[    6.630447] Console: switching to colour frame buffer device 200x56
[    6.648983] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    6.686466] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[    6.732926] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
[    6.732932] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[    6.732964] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[    6.742540] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:0:0-b678a
[    6.742588] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:20:0 Kernel ABI 3:23:0
[    6.742594] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30
[    6.857689] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:0:0-b678a
[    6.857694] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:20:0 Kernel ABI 3:23:0
[    6.878013] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:20:0 Kernel ABI 3:23:0
[    6.878292] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
[    6.915797] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.915805] snd_hda_codec_realtek ehdaudio0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.915807] snd_hda_codec_realtek ehdaudio0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.915809] snd_hda_codec_realtek ehdaudio0D0:    mono: mono_out=0x0
[    6.915810] snd_hda_codec_realtek ehdaudio0D0:    inputs:
[    6.915812] snd_hda_codec_realtek ehdaudio0D0:      Mic=0x19
[    6.965033] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
[    6.965043] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
[    6.965187] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
[    6.965191] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
[    6.965199] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
[    6.965202] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
[    6.965208] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
[    6.965213] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
[    6.965218] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
[    6.965225] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
[    6.965233] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
[    6.965240] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
[    6.965245] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
[    6.965259] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[    6.990057] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input21
[    6.990513] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input22
[    6.990986] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input23
[    6.991224] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input24
[    6.991496] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input25
[    7.800739] loop25: detected capacity change from 0 to 8
[    8.222538] Bluetooth: hci0: Waiting for firmware download to complete
[    8.223459] Bluetooth: hci0: Firmware loaded in 1743166 usecs
[    8.223499] Bluetooth: hci0: Waiting for device to boot
[    8.238465] Bluetooth: hci0: Device booted in 14635 usecs
[    8.238640] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    8.241085] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc
[    8.242467] Bluetooth: hci0: Applying Intel DDC parameters completed
[    8.243464] Bluetooth: hci0: Firmware revision 0.4 build 206 week 22 2023
[    8.246284] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[    8.328818] Bluetooth: MGMT ver 1.22
[    8.335378] NET: Registered PF_ALG protocol family
[    9.544217] rfkill: input handler disabled
[   10.402839] wlp0s20f3: authenticate with 38:35:fb:d7:52:f4
[   10.408463] wlp0s20f3: send auth to 38:35:fb:d7:52:f4 (try 1/3)
[   10.436446] wlp0s20f3: authenticated
[   10.438584] wlp0s20f3: associate with 38:35:fb:d7:52:f4 (try 1/3)
[   10.468033] wlp0s20f3: RX AssocResp from 38:35:fb:d7:52:f4 (capab=0x511 status=0 aid=106)
[   10.479150] wlp0s20f3: associated
[   10.563752] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by 38:35:fb:d7:52:f4
[   10.661903] kauditd_printk_skb: 83 callbacks suppressed
[   10.661908] audit: type=1326 audit(1711122154.912:95): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=snap.cups.cupsd pid=1524 comm="cupsd" exe="/snap/cups/1024/sbin/cupsd" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7eb644b32a9b code=0x50000
[   17.942504] systemd-journald[300]: File /var/log/journal/f66d73cdb20644c7998ac24bcd00f6d6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   18.149045] Bluetooth: RFCOMM TTY layer initialized
[   18.149053] Bluetooth: RFCOMM socket layer initialized
[   18.149058] Bluetooth: RFCOMM ver 1.11
[   18.268928] rfkill: input handler enabled
[   20.586159] rfkill: input handler disabled
[   22.390717] warning: `NetworkChangeNo' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[   85.593793] audit: type=1400 audit(1711122229.497:96): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=3924 comm="snap-confine" capability=12  capname="net_admin"
[   85.593804] audit: type=1400 audit(1711122229.497:97): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=3924 comm="snap-confine" capability=38  capname="perfmon"
[  255.454840] input: Galaxy Buds2 (D6FF) (AVRCP) as /devices/virtual/input/input26
[ 1949.745258] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[ 1949.894171] usb 3-1: New USB device found, idVendor=152d, idProduct=0579, bcdDevice= 1.00
[ 1949.894181] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1949.894184] usb 3-1: Product: USB Mass Storage
[ 1949.894186] usb 3-1: Manufacturer: JMicron
[ 1949.894189] usb 3-1: SerialNumber: 152D00579000
[ 1950.479434] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1950.479608] scsi host2: usb-storage 3-1:1.0
[ 1950.479757] usbcore: registered new interface driver usb-storage
[ 1950.482481] usbcore: registered new interface driver uas
[ 1951.481679] scsi 2:0:0:0: Direct-Access     JMICRON  JMS579                PQ: 0 ANSI: 6
[ 1951.482062] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1951.483541] sd 2:0:0:0: [sda] Unit Not Ready
[ 1951.483547] sd 2:0:0:0: [sda] Sense Key : Illegal Request [current] 
[ 1951.483551] sd 2:0:0:0: [sda] Add. Sense: Invalid command operation code
[ 1951.487199] sd 2:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[ 1951.487208] sd 2:0:0:0: [sda] Sense Key : Illegal Request [current] 
[ 1951.487214] sd 2:0:0:0: [sda] Add. Sense: Invalid command operation code
[ 1951.487222] sd 2:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[ 1951.487226] sd 2:0:0:0: [sda] 0-byte physical blocks
[ 1951.487698] sd 2:0:0:0: [sda] Write Protect is off
[ 1951.487704] sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 1951.488385] sd 2:0:0:0: [sda] Asking for cache data failed
[ 1951.488394] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 1951.489299] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2000.734007] usb 3-1: USB disconnect, device number 5
[ 2005.821124] usb 3-1: new high-speed USB device number 6 using xhci_hcd
[ 2006.014236] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[ 2006.014246] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2006.014250] usb 3-1: Product: External Disk 3.0
[ 2006.014253] usb 3-1: Manufacturer: JMicron
[ 2006.014255] usb 3-1: SerialNumber: 154410601543
[ 2006.038778] scsi host2: uas
[ 2006.049675] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[ 2006.052858] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2006.063213] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2006.063218] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 2006.063459] sd 2:0:0:0: [sda] Write Protect is off
[ 2006.063461] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[ 2006.063867] sd 2:0:0:0: [sda] Disabling FUA
[ 2006.063869] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2006.064003] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 2006.064004] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 2006.065772]  sda:
[ 2006.065812] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2039.420905] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 2100.488677] usb 3-1: USB disconnect, device number 6
[ 2100.529833] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 2100.789783] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 3530.873443] audit: type=1400 audit(1711125674.769:98): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=6222 comm="snap-confine" capability=12  capname="net_admin"
[ 3530.873451] audit: type=1400 audit(1711125674.769:99): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/21184/usr/lib/snapd/snap-confine" pid=6222 comm="snap-confine" capability=38  capname="perfmon"
[ 4607.315510] perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 7369.180306] usb 3-1: new high-speed USB device number 7 using xhci_hcd
[ 7369.374192] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[ 7369.374203] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7369.374206] usb 3-1: Product: External Disk 3.0
[ 7369.374209] usb 3-1: Manufacturer: JMicron
[ 7369.374212] usb 3-1: SerialNumber: 154410601543
[ 7369.399471] scsi host2: uas
[ 7369.410280] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[ 7369.412607] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7369.412924] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 7369.412946] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 7369.413111] sd 2:0:0:0: [sda] Write Protect is off
[ 7369.413114] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[ 7369.413440] sd 2:0:0:0: [sda] Disabling FUA
[ 7369.413443] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7369.413569] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 7369.413573] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 7369.415230]  sda:
[ 7369.415308] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7432.182437] usb 3-1: USB disconnect, device number 7
[ 7432.236738] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 7432.484804] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 7719.674718] usb 3-1: new high-speed USB device number 8 using xhci_hcd
[ 7719.868413] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[ 7719.868424] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7719.868427] usb 3-1: Product: External Disk 3.0
[ 7719.868430] usb 3-1: Manufacturer: JMicron
[ 7719.868432] usb 3-1: SerialNumber: 154410601543
[ 7719.892900] scsi host2: uas
[ 7719.903846] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[ 7719.906897] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7719.917348] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 7719.917352] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 7719.917526] sd 2:0:0:0: [sda] Write Protect is off
[ 7719.917528] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[ 7719.917969] sd 2:0:0:0: [sda] Disabling FUA
[ 7719.917970] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7719.918115] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 7719.918116] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 7719.919819]  sda:
[ 7719.919850] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7799.219943] usb 3-1: USB disconnect, device number 8
[ 7799.251157] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 7799.527159] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 8102.216997] usb 3-1: new high-speed USB device number 9 using xhci_hcd
[ 8102.410328] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[ 8102.410337] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8102.410340] usb 3-1: Product: External Disk 3.0
[ 8102.410343] usb 3-1: Manufacturer: JMicron
[ 8102.410345] usb 3-1: SerialNumber: 154410601543
[ 8102.435082] scsi host2: uas
[ 8102.445953] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[ 8102.449437] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 8102.459989] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 8102.459992] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 8102.460178] sd 2:0:0:0: [sda] Write Protect is off
[ 8102.460179] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[ 8102.460576] sd 2:0:0:0: [sda] Disabling FUA
[ 8102.460577] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8102.460703] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 8102.460705] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 8102.462482]  sda:
[ 8102.462513] sd 2:0:0:0: [sda] Attached SCSI disk
[ 8115.764867]  sda:
[ 8115.950994]  sda:
[ 8176.765650] usb 3-1: USB disconnect, device number 9
[ 8176.805611] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 8177.057598] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10112.456358] usb 3-1: new high-speed USB device number 10 using xhci_hcd
[10112.654463] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10112.654473] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10112.654476] usb 3-1: Product: External Disk 3.0
[10112.654479] usb 3-1: Manufacturer: JMicron
[10112.654481] usb 3-1: SerialNumber: 154410601543
[10112.680000] scsi host2: uas
[10112.690947] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10112.694031] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10112.694421] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10112.694426] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10112.694633] sd 2:0:0:0: [sda] Write Protect is off
[10112.694637] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10112.695010] sd 2:0:0:0: [sda] Disabling FUA
[10112.695014] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10112.695162] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10112.695166] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10112.708169]  sda:
[10112.708205] sd 2:0:0:0: [sda] Attached SCSI disk
[10124.445485]  sda:
[10124.629093]  sda:
[10140.033265]  sda:
[10140.306356]  sda: sda1
[10141.088284]  sda: sda1
[10191.384517] EXT4-fs (sda1): mounted filesystem f70d7286-9722-4871-b9b6-c7b7540aa42e r/w with ordered data mode. Quota mode: none.
[10205.117291] EXT4-fs (sda1): unmounting filesystem f70d7286-9722-4871-b9b6-c7b7540aa42e.
[10211.012439] usb 3-1: USB disconnect, device number 10
[10211.065029] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10211.309032] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10217.981192] usb 3-1: new high-speed USB device number 11 using xhci_hcd
[10218.182430] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10218.182440] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10218.182444] usb 3-1: Product: External Disk 3.0
[10218.182447] usb 3-1: Manufacturer: JMicron
[10218.182449] usb 3-1: SerialNumber: 154410601543
[10218.208276] scsi host2: uas
[10218.219213] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10218.222556] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10218.233072] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10218.233082] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10218.233280] sd 2:0:0:0: [sda] Write Protect is off
[10218.233283] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10218.233695] sd 2:0:0:0: [sda] Disabling FUA
[10218.233697] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10218.233824] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10218.233827] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10218.235869]  sda: sda1
[10218.236002] sd 2:0:0:0: [sda] Attached SCSI disk
[10219.174517] EXT4-fs (sda1): mounted filesystem f70d7286-9722-4871-b9b6-c7b7540aa42e r/w with ordered data mode. Quota mode: none.
[10301.287223] audit: type=1400 audit(1711132445.123:100): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/at-spi/bus_0" pid=16109 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10301.287300] audit: type=1400 audit(1711132445.123:101): apparmor="ALLOWED" operation="file_perm" class="file" profile="libreoffice-soffice" name="/run/user/1000/at-spi/bus_0" pid=16109 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[10301.287303] audit: type=1400 audit(1711132445.123:102): apparmor="ALLOWED" operation="file_perm" class="file" profile="libreoffice-soffice" name="/run/user/1000/at-spi/bus_0" pid=16109 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[10308.493230] audit: type=1400 audit(1711132452.327:103): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=16109 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[10308.493245] audit: type=1400 audit(1711132452.327:104): apparmor="ALLOWED" operation="open" class="file" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/timezoneTypes.res" pid=16109 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[10315.535472] audit: type=1400 audit(1711132459.371:105): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/gvfsd/socket-rzBs5AR7" pid=16109 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10315.628206] audit: type=1400 audit(1711132459.463:106): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/gvfsd/socket-Reim3ZBN" pid=16109 comm="pool-soffice" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10315.630848] audit: type=1400 audit(1711132459.467:107): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/gvfsd/socket-EpempLg3" pid=16109 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10315.665357] audit: type=1400 audit(1711132459.499:108): apparmor="ALLOWED" operation="connect" class="file" profile="libreoffice-soffice" name="/run/user/1000/gvfsd/socket-PCqoSAdx" pid=16109 comm="pool-soffice" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[10448.951557] EXT4-fs (sda1): unmounting filesystem f70d7286-9722-4871-b9b6-c7b7540aa42e.
[10452.084463] usb 3-1: USB disconnect, device number 11
[10452.099169] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2
[10452.155365] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10452.423220] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10503.111662] usb 3-1: new high-speed USB device number 12 using xhci_hcd
[10503.305754] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10503.305765] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10503.305769] usb 3-1: Product: External Disk 3.0
[10503.305771] usb 3-1: Manufacturer: JMicron
[10503.305774] usb 3-1: SerialNumber: 154410601543
[10503.331250] scsi host2: uas
[10503.342069] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10503.345169] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10503.345343] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10503.345348] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10503.345614] sd 2:0:0:0: [sda] Write Protect is off
[10503.345620] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10503.346151] sd 2:0:0:0: [sda] Disabling FUA
[10503.346155] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10503.346330] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10503.346333] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10503.348821]  sda: sda1
[10503.349663] sd 2:0:0:0: [sda] Attached SCSI disk
[10524.832012] usb 3-1: USB disconnect, device number 12
[10524.832192] usb 3-1: cmd cmplt err -108
[10524.832271] sd 2:0:0:0: [sda] tag#11 uas_zap_pending 0 uas-tag 1 inflight: CMD 
[10524.832273] sd 2:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 00 00 8a b8 00 00 08 00
[10524.832288] sd 2:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=0s
[10524.832290] sd 2:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 00 00 8a b8 00 00 08 00
[10524.832291] I/O error, dev sda, sector 35512 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[10524.832586] device offline error, dev sda, sector 2048 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.832590] Buffer I/O error on dev sda1, logical block 0, lost async page write
[10524.832595] Buffer I/O error on dev sda1, logical block 1, lost async page write
[10524.832596] Buffer I/O error on dev sda1, logical block 2, lost async page write
[10524.832598] Buffer I/O error on dev sda1, logical block 3, lost async page write
[10524.832606] Buffer I/O error on dev sda1, logical block 4, lost async page write
[10524.832607] Buffer I/O error on dev sda1, logical block 5, lost async page write
[10524.832609] Buffer I/O error on dev sda1, logical block 6, lost async page write
[10524.832611] Buffer I/O error on dev sda1, logical block 7, lost async page write
[10524.832613] Buffer I/O error on dev sda1, logical block 8, lost async page write
[10524.832614] Buffer I/O error on dev sda1, logical block 9, lost async page write
[10524.832784] device offline error, dev sda, sector 3072 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.832951] device offline error, dev sda, sector 4096 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833113] device offline error, dev sda, sector 5120 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833257] device offline error, dev sda, sector 6144 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833417] device offline error, dev sda, sector 7168 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833563] device offline error, dev sda, sector 8192 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833707] device offline error, dev sda, sector 9216 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.833816] device offline error, dev sda, sector 10240 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[10524.899846] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10525.175849] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10685.941323] usb 3-1: new high-speed USB device number 13 using xhci_hcd
[10686.134323] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10686.134329] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10686.134330] usb 3-1: Product: External Disk 3.0
[10686.134332] usb 3-1: Manufacturer: JMicron
[10686.134333] usb 3-1: SerialNumber: 154410601543
[10686.158131] scsi host2: uas
[10686.168955] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10686.171919] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10686.172220] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10686.172223] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10686.172408] sd 2:0:0:0: [sda] Write Protect is off
[10686.172410] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10686.172767] sd 2:0:0:0: [sda] Disabling FUA
[10686.172769] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10686.172910] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10686.172913] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10686.185530]  sda: sda1
[10686.185644] sd 2:0:0:0: [sda] Attached SCSI disk
[10752.838459] usb 3-1: USB disconnect, device number 13
[10752.893895] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10753.145907] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10756.809934] usb 3-1: new high-speed USB device number 14 using xhci_hcd
[10757.003934] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10757.003944] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10757.003948] usb 3-1: Product: External Disk 3.0
[10757.003951] usb 3-1: Manufacturer: JMicron
[10757.003953] usb 3-1: SerialNumber: 154410601543
[10757.029110] scsi host2: uas
[10757.040159] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10757.043538] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10757.043870] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10757.043876] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10757.044147] sd 2:0:0:0: [sda] Write Protect is off
[10757.044150] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10757.044576] sd 2:0:0:0: [sda] Disabling FUA
[10757.044579] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10757.044725] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10757.044728] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10757.046992]  sda: sda1
[10757.047173] sd 2:0:0:0: [sda] Attached SCSI disk
[10817.911014] usb 3-1: USB disconnect, device number 14
[10817.942403] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10818.190375] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10961.239339] usb 3-1: new high-speed USB device number 15 using xhci_hcd
[10961.432856] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[10961.432864] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10961.432866] usb 3-1: Product: External Disk 3.0
[10961.432869] usb 3-1: Manufacturer: JMicron
[10961.432871] usb 3-1: SerialNumber: 154410601543
[10961.457925] scsi host2: uas
[10961.468825] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[10961.472513] sd 2:0:0:0: Attached scsi generic sg0 type 0
[10961.472808] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[10961.472812] sd 2:0:0:0: [sda] 4096-byte physical blocks
[10961.472992] sd 2:0:0:0: [sda] Write Protect is off
[10961.472994] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[10961.473481] sd 2:0:0:0: [sda] Disabling FUA
[10961.473484] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[10961.473598] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[10961.473600] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[10961.475371]  sda: sda1
[10961.475520] sd 2:0:0:0: [sda] Attached SCSI disk
[10990.156465] usb 3-1: USB disconnect, device number 15
[10990.195739] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10990.439760] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12218.852255] usb 3-1: new high-speed USB device number 16 using xhci_hcd
[12219.046113] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12219.046123] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12219.046126] usb 3-1: Product: External Disk 3.0
[12219.046129] usb 3-1: Manufacturer: JMicron
[12219.046131] usb 3-1: SerialNumber: 154410601543
[12219.070245] scsi host2: uas
[12219.081159] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12219.084522] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12219.084734] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12219.084738] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12219.085134] sd 2:0:0:0: [sda] Write Protect is off
[12219.085137] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12219.085550] sd 2:0:0:0: [sda] Disabling FUA
[12219.085552] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12219.085700] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12219.085703] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12219.087492]  sda: sda1
[12219.087572] sd 2:0:0:0: [sda] Attached SCSI disk
[12245.385870]  sda: sda1
[12295.591513] usb 3-1: USB disconnect, device number 16
[12295.621010] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12295.888785] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12305.784942] usb 3-1: new high-speed USB device number 17 using xhci_hcd
[12305.982045] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12305.982054] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12305.982058] usb 3-1: Product: External Disk 3.0
[12305.982061] usb 3-1: Manufacturer: JMicron
[12305.982063] usb 3-1: SerialNumber: 154410601543
[12306.006534] scsi host2: uas
[12306.017473] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12306.020800] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12306.021373] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12306.021380] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12306.021623] sd 2:0:0:0: [sda] Write Protect is off
[12306.021626] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12306.022130] sd 2:0:0:0: [sda] Disabling FUA
[12306.022132] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12306.022285] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12306.022287] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12306.024435]  sda: sda1
[12306.024533] sd 2:0:0:0: [sda] Attached SCSI disk
[12327.693377] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[12520.832496] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[12524.486212] usb 3-1: USB disconnect, device number 17
[12524.530151] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12524.794049] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12546.842240] usb 3-1: new high-speed USB device number 18 using xhci_hcd
[12546.992376] usb 3-1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[12546.992386] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12546.992389] usb 3-1: Product: Ultra
[12546.992392] usb 3-1: Manufacturer: SanDisk
[12546.992394] usb 3-1: SerialNumber: 0101f7c1fef9cf388d0e571590632eb366387670a081107855176ef678cb44eb68040000000000000000000070a1aa89ff0f580081558107a6262545
[12546.995329] usb-storage 3-1:1.0: USB Mass Storage device detected
[12546.995705] scsi host2: usb-storage 3-1:1.0
[12548.012186] scsi 2:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[12548.012680] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12548.013211] sd 2:0:0:0: [sda] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB)
[12548.014420] sd 2:0:0:0: [sda] Write Protect is off
[12548.014430] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[12548.015022] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[12548.037422]  sda: sda1
[12548.037569] sd 2:0:0:0: [sda] Attached SCSI removable disk
[12574.952634] usb 3-1: USB disconnect, device number 18
[12590.662389] usb 3-1: new high-speed USB device number 19 using xhci_hcd
[12590.852023] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12590.852031] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12590.852034] usb 3-1: Product: External Disk 3.0
[12590.852037] usb 3-1: Manufacturer: JMicron
[12590.852039] usb 3-1: SerialNumber: 154410601543
[12590.876666] scsi host2: uas
[12590.887567] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12590.891171] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12590.901768] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12590.901776] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12590.902039] sd 2:0:0:0: [sda] Write Protect is off
[12590.902044] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12590.902461] sd 2:0:0:0: [sda] Disabling FUA
[12590.902467] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12590.902631] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12590.902635] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12590.904813]  sda: sda1
[12590.904926] sd 2:0:0:0: [sda] Attached SCSI disk
[12591.834747] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[12648.240765] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[12651.689046] usb 3-1: USB disconnect, device number 19
[12651.722906] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12651.990787] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12655.430862] usb 3-1: new high-speed USB device number 20 using xhci_hcd
[12655.579952] usb 3-1: New USB device found, idVendor=152d, idProduct=0579, bcdDevice= 1.00
[12655.579963] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12655.579966] usb 3-1: Product: USB Mass Storage
[12655.579969] usb 3-1: Manufacturer: JMicron
[12655.579972] usb 3-1: SerialNumber: 152D00579000
[12655.581745] usb-storage 3-1:1.0: USB Mass Storage device detected
[12655.582007] scsi host2: usb-storage 3-1:1.0
[12656.587530] scsi 2:0:0:0: Direct-Access     JMICRON  JMS579                PQ: 0 ANSI: 6
[12656.588035] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12656.590106] sd 2:0:0:0: [sda] Unit Not Ready
[12656.590114] sd 2:0:0:0: [sda] Sense Key : Illegal Request [current] 
[12656.590120] sd 2:0:0:0: [sda] Add. Sense: Invalid command operation code
[12656.593768] sd 2:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[12656.593771] sd 2:0:0:0: [sda] Sense Key : Illegal Request [current] 
[12656.593773] sd 2:0:0:0: [sda] Add. Sense: Invalid command operation code
[12656.593776] sd 2:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[12656.593778] sd 2:0:0:0: [sda] 0-byte physical blocks
[12656.594062] sd 2:0:0:0: [sda] Write Protect is off
[12656.594064] sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00
[12656.594390] sd 2:0:0:0: [sda] Asking for cache data failed
[12656.594394] sd 2:0:0:0: [sda] Assuming drive cache: write through
[12656.595599] sd 2:0:0:0: [sda] Attached SCSI disk
[12664.829093] usb 3-1: USB disconnect, device number 20
[12679.391046] usb 3-1: new high-speed USB device number 21 using xhci_hcd
[12679.584445] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12679.584456] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12679.584459] usb 3-1: Product: External Disk 3.0
[12679.584462] usb 3-1: Manufacturer: JMicron
[12679.584465] usb 3-1: SerialNumber: 154410601543
[12679.610136] scsi host2: uas
[12679.621078] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12679.624415] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12679.624741] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12679.624749] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12679.624983] sd 2:0:0:0: [sda] Write Protect is off
[12679.624987] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12679.625452] sd 2:0:0:0: [sda] Disabling FUA
[12679.625456] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12679.625601] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12679.625605] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12679.627603]  sda: sda1
[12679.627760] sd 2:0:0:0: [sda] Attached SCSI disk
[12680.556264] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[12707.308665] usb 3-1: USB disconnect, device number 21
[12707.309651] blk_print_req_error: 40 callbacks suppressed
[12707.309656] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2
[12707.309695] device offline error, dev sda, sector 2072 op 0x1:(WRITE) flags 0x103000 phys_seg 1 prio class 2
[12707.309713] buffer_io_error: 4173 callbacks suppressed
[12707.309716] Buffer I/O error on dev sda1, logical block 3, lost async page write
[12707.312626] EXT4-fs (sda1): shut down requested (2)
[12707.312636] Aborting journal on device sda1-8.
[12707.312648] Buffer I/O error on dev sda1, logical block 30441472, lost sync page write
[12707.312655] JBD2: I/O error when updating journal superblock for sda1-8.
[12707.356198] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[12707.379056] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12707.627097] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[12742.723387] usb 3-1: new high-speed USB device number 22 using xhci_hcd
[12742.917662] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[12742.917672] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12742.917676] usb 3-1: Product: External Disk 3.0
[12742.917679] usb 3-1: Manufacturer: JMicron
[12742.917681] usb 3-1: SerialNumber: 154410601543
[12742.943633] scsi host2: uas
[12742.954579] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[12742.957947] sd 2:0:0:0: Attached scsi generic sg0 type 0
[12742.968529] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[12742.968531] sd 2:0:0:0: [sda] 4096-byte physical blocks
[12742.968738] sd 2:0:0:0: [sda] Write Protect is off
[12742.968739] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[12742.969097] sd 2:0:0:0: [sda] Disabling FUA
[12742.969098] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[12742.969236] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[12742.969237] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[12742.970819]  sda: sda1
[12742.970877] sd 2:0:0:0: [sda] Attached SCSI disk
[12743.923077] EXT4-fs (sda1): recovery complete
[12743.934848] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[12762.659895] usb 3-1: USB disconnect, device number 22
[12762.660613] device offline error, dev sda, sector 243535064 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 2
[12762.660631] Aborting journal on device sda1-8.
[12762.660647] device offline error, dev sda, sector 243533824 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[12762.660653] device offline error, dev sda, sector 243533824 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[12762.660658] Buffer I/O error on dev sda1, logical block 30441472, lost sync page write
[12762.660670] JBD2: I/O error when updating journal superblock for sda1-8.
[12762.665853] EXT4-fs (sda1): shut down requested (2)
[12762.677364] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[12762.707398] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[12762.987435] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[13128.270041] input: Galaxy Buds2 (D6FF) (AVRCP) as /devices/virtual/input/input27
[20780.094186] usb 3-4: USB disconnect, device number 2
[20784.617342] usb 3-1: new full-speed USB device number 23 using xhci_hcd
[20784.772007] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[20784.772018] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20784.772021] usb 3-1: Product: USB Receiver
[20784.772024] usb 3-1: Manufacturer: Logitech
[20784.775428] logitech-djreceiver 0003:046D:C52F.0005: hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[20784.835427] logitech-djreceiver 0003:046D:C52F.0006: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[20784.894562] logitech-djreceiver 0003:046D:C52F.0006: device of type eQUAD step 4 DJ (0x04) connected on slot 1
[20784.902785] input: Logitech B330/M330/M331 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C52F.0006/0003:046D:4057.0007/input/input28
[20784.903056] logitech-hidpp-device 0003:046D:4057.0007: input,hidraw3: USB HID v1.11 Mouse [Logitech B330/M330/M331] on usb-0000:00:14.0-1/input1:1
[20802.993597] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[20803.014520] usb 4-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[20803.014530] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20803.014534] usb 4-1: Product: External Disk 3.0
[20803.014537] usb 4-1: Manufacturer: JMicron
[20803.014539] usb 4-1: SerialNumber: 154410601543
[20803.020784] scsi host2: uas
[20803.022040] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[20803.024497] sd 2:0:0:0: Attached scsi generic sg0 type 0
[20803.024777] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[20803.024782] sd 2:0:0:0: [sda] 4096-byte physical blocks
[20803.024943] sd 2:0:0:0: [sda] Write Protect is off
[20803.024946] sd 2:0:0:0: [sda] Mode Sense: 53 00 00 08
[20803.025253] sd 2:0:0:0: [sda] Disabling FUA
[20803.025256] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20803.025467] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[20803.025474] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[20803.027198]  sda: sda1
[20803.027406] sd 2:0:0:0: [sda] Attached SCSI disk
[20803.828070] EXT4-fs (sda1): recovery complete
[20803.829247] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.
[20804.048967] logitech-hidpp-device 0003:046D:4057.0007: HID++ 4.5 device connected.
[20816.777529] usb 4-1: USB disconnect, device number 2
[20816.793501] device offline error, dev sda, sector 125847808 op 0x1:(WRITE) flags 0x4000 phys_seg 128 prio class 2
[20816.793525] device offline error, dev sda, sector 125848832 op 0x1:(WRITE) flags 0x0 phys_seg 128 prio class 2
[20816.793531] device offline error, dev sda, sector 125849856 op 0x1:(WRITE) flags 0x4800 phys_seg 128 prio class 2
[20816.793536] device offline error, dev sda, sector 125850880 op 0x1:(WRITE) flags 0x800 phys_seg 128 prio class 2
[20816.793542] device offline error, dev sda, sector 2072 op 0x1:(WRITE) flags 0x103000 phys_seg 1 prio class 2
[20816.793547] Buffer I/O error on dev sda1, logical block 3, lost async page write
[20816.793600] device offline error, dev sda, sector 243535120 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 2
[20816.793615] Aborting journal on device sda1-8.
[20816.793628] device offline error, dev sda, sector 243533824 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[20816.793632] device offline error, dev sda, sector 243533824 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[20816.793636] Buffer I/O error on dev sda1, logical block 30441472, lost sync page write
[20816.793642] JBD2: I/O error when updating journal superblock for sda1-8.
[20816.795440] EXT4-fs (sda1): shut down requested (2)
[20816.812630] EXT4-fs (sda1): unmounting filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b.
[20816.853477] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[20817.125489] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[21240.038726] usb 3-1: USB disconnect, device number 23
[21243.696957] usb 3-4: new full-speed USB device number 24 using xhci_hcd
[21243.847448] usb 3-4: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[21243.847457] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[21243.847461] usb 3-4: Product: USB Receiver
[21243.847463] usb 3-4: Manufacturer: Logitech
[21243.851938] logitech-djreceiver 0003:046D:C52F.0008: hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[21243.910819] logitech-djreceiver 0003:046D:C52F.0009: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[21243.970488] logitech-djreceiver 0003:046D:C52F.0009: device of type eQUAD step 4 DJ (0x04) connected on slot 1
[21243.978842] input: Logitech B330/M330/M331 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0009/0003:046D:4057.000A/input/input29
[21243.979194] logitech-hidpp-device 0003:046D:4057.000A: input,hidraw3: USB HID v1.11 Mouse [Logitech B330/M330/M331] on usb-0000:00:14.0-4/input1:1
[21268.637128] usb 3-1: new high-speed USB device number 25 using xhci_hcd
[21268.831164] usb 3-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04
[21268.831174] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[21268.831178] usb 3-1: Product: External Disk 3.0
[21268.831181] usb 3-1: Manufacturer: JMicron
[21268.831183] usb 3-1: SerialNumber: 154410601543
[21268.856889] scsi host2: uas
[21268.867815] scsi 2:0:0:0: Direct-Access     Crucial_ CT250MX200SSD3   0204 PQ: 0 ANSI: 6
[21268.871044] sd 2:0:0:0: Attached scsi generic sg0 type 0
[21268.871338] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[21268.871345] sd 2:0:0:0: [sda] 4096-byte physical blocks
[21268.871650] sd 2:0:0:0: [sda] Write Protect is off
[21268.871654] sd 2:0:0:0: [sda] Mode Sense: 5f 00 00 08
[21268.872164] sd 2:0:0:0: [sda] Disabling FUA
[21268.872167] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[21268.872326] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[21268.872330] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[21268.884486]  sda: sda1
[21268.884594] sd 2:0:0:0: [sda] Attached SCSI disk
[21269.022568] logitech-hidpp-device 0003:046D:4057.000A: HID++ 4.5 device connected.
[21269.815406] EXT4-fs (sda1): recovery complete
[21269.827220] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.

geole · Le 22/03/2024, à 23:59

Il y en a des lignes pour SDA. Visiblement il a un problème.
Les dernières lignes sont pleines d'espoir.

0] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[21268.884486]  sda: sda1
[21268.884594] sd 2:0:0:0: [sda] Attached SCSI disk
[21269.022568] logitech-hidpp-device 0003:046D:4057.000A: HID++ 4.5 device connected.
[21269.815406] EXT4-fs (sda1): recovery complete
[21269.827220] EXT4-fs (sda1): mounted filesystem 166d11c0-29c8-4be5-8fc7-baa60ed5896b r/w with ordered data mode. Quota mode: none.

Monte vite SDA1 et sauvegarde son contenu.

sudo mount -v /dev/sda1  /mnt

jcvilleneuve · Le 23/03/2024, à 00:26

Le disque a été reformaté en ext4 il est donc vide.
Il chauffe beaucoup, et je pense que c'est pour ça qu'il bogue.

geole · Le 23/03/2024, à 11:06

Bonjour.
Peux-tu installer l'application smartmontools et produire l'état du disque. Chapitre 3.
Comme c'est un disque externe, il faudra probablement des options complémentaires.
-d usbjmicron
Tu donneras aussi ce retour.

journalctl --no-pager -b -g sda

Dernière modification par geole (Le 23/03/2024, à 11:13)

iznobe · Le 23/03/2024, à 13:03

nany a écrit :

Bonjour,

ylag a écrit :
Grand nombre de fichiers n'appartenant pas à l'utilisateur dans son répertoire personnel, est-ce que ça pourrait nuire au montage du disque externe ?
Si, parmi tous ces fichiers, il existe un répertoire .gvfs, oui.
En règle général TOUT ce qui est dans $HOME doit appartenir à $USER.

Bonjour , une commande qui donne un résultat plus précis des fichiers cachés qui pourrait avoir un impact sur le système utilisateur donc ( possiblement améliorable ) :

sudo find ~ -ipath "*.*" ! -user $USER -exec ls -ld {} \;

bien mieux que la classique :

echo -e "\n\tNombre d'éléments de /home/$USER ne m ' appartenant pas :"; sudo find ~ \( ! -user $USER -o ! -group $USER \) | wc -l

meme si effectivement nany a tout a fait raison .

Dernière modification par iznobe (Le 23/03/2024, à 13:06)

jcvilleneuve · Le 05/04/2024, à 09:30

Hello

Désolé de n'avoir pas répondu plus tôt.
Bon le DD externe est bien mort ce coup-ci mais j'ai pu virer tous les fichiers qui ne m'appartenaient pas sur mon ordi.
Merci à tous et toutes pour votre aide.

Dernière modification par jcvilleneuve (Le 05/04/2024, à 09:30)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 22/03/2024, à 15:24

impossible de voir mon DD ext

#2 Le 22/03/2024, à 15:35

Re : impossible de voir mon DD ext

#3 Le 22/03/2024, à 15:50

Re : impossible de voir mon DD ext

#4 Le 22/03/2024, à 16:43

Re : impossible de voir mon DD ext

#5 Le 22/03/2024, à 16:52

Re : impossible de voir mon DD ext

#6 Le 22/03/2024, à 18:18

Re : impossible de voir mon DD ext

#7 Le 22/03/2024, à 18:49

Re : impossible de voir mon DD ext

#8 Le 22/03/2024, à 19:01

Re : impossible de voir mon DD ext

#9 Le 22/03/2024, à 19:17

Re : impossible de voir mon DD ext

#10 Le 22/03/2024, à 19:19

Re : impossible de voir mon DD ext

#11 Le 22/03/2024, à 19:24

Re : impossible de voir mon DD ext

#12 Le 22/03/2024, à 19:46

Re : impossible de voir mon DD ext

#13 Le 22/03/2024, à 20:47

Re : impossible de voir mon DD ext

#14 Le 22/03/2024, à 23:13

Re : impossible de voir mon DD ext

#15 Le 22/03/2024, à 23:34

Re : impossible de voir mon DD ext

#16 Le 22/03/2024, à 23:40

Re : impossible de voir mon DD ext

#17 Le 22/03/2024, à 23:59

Re : impossible de voir mon DD ext

#18 Le 23/03/2024, à 00:26

Re : impossible de voir mon DD ext

#19 Le 23/03/2024, à 11:06

Re : impossible de voir mon DD ext

#20 Le 23/03/2024, à 13:03

Re : impossible de voir mon DD ext

#21 Le 05/04/2024, à 09:30

Re : impossible de voir mon DD ext

Pied de page des forums