Pages : 1
#1 Le 26/06/2006, à 19:49
- Michel38
Installer un hub USB .... ?
Bonsoir,
TEDLT ..... pas moyen de faire reconnaître mon hub USB Belkin par Dapper
Merci pour les conseils
LM18.3 - Kernel: 4.4.0-53-generic i686 (32 bit gcc: 5.4.0) - Cinnamon 3.4.6 (Gtk 3.18.9-1ubuntu3.3)
System: CLEVO (portable)
CPU : Dual core Intel Core i5-3230M
Card : Intel 3rd Gen Core processor Graphics Controller
Hors ligne
#2 Le 27/06/2006, à 00:12
- bastringue
Re : Installer un hub USB .... ?
B'soir
Branche le (pense à l'alim. secteur s'il y en a une et lance un p'tit :
$ lshw
moi ça donne : [extrait]
-usb
description: USB hub
vendor: Belkin Components
physical id: 1
bus info: usb@1:1
version: 0.00
capabilities: usb-2.00
configuration: driver=hub maxpower=2mA slots=7 speed=480.0MB/s
Dernière modification par bastringue (Le 27/06/2006, à 00:13)
****Contre la vente liée : s'informer, signer, informer ...!****
racketiciel.info
Hors ligne
#3 Le 27/06/2006, à 08:23
- Michel38
Re : Installer un hub USB .... ?
Bonjour et merci, j'essaye ce soir et je fais suivre ....
LM18.3 - Kernel: 4.4.0-53-generic i686 (32 bit gcc: 5.4.0) - Cinnamon 3.4.6 (Gtk 3.18.9-1ubuntu3.3)
System: CLEVO (portable)
CPU : Dual core Intel Core i5-3230M
Card : Intel 3rd Gen Core processor Graphics Controller
Hors ligne
#4 Le 27/06/2006, à 17:35
- Michel38
Re : Installer un hub USB .... ?
Voilà:
sudo lshw | grep usb
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb agp ls120boot zipboot biosbootspecification
*-usb:0
*-usbhost
bus info: usb@4
logical name: usb4
capabilities: usb-1.10
*-usb:1
*-usbhost
bus info: usb@3
logical name: usb3
capabilities: usb-1.10
*-usb:2
*-usbhost
bus info: usb@2
logical name: usb2
capabilities: usb-1.10
*-usb:3
*-usbhost
bus info: usb@1
logical name: usb1
capabilities: usb-1.10
*-usb:4
*-usbhost
bus info: usb@5
logical name: usb5
capabilities: usb-2.00
Ce sont mes 4 prises USB du PC sur une desquels mon Belkin 4 ports est raccordé ...... je n'y comprends rien !
usb4 serait-il mon hub ? Pq ne le reconnait-il pas comme dans ton cas ?
Merci pour les conseils
Dernière modification par Michel38 (Le 27/06/2006, à 17:55)
LM18.3 - Kernel: 4.4.0-53-generic i686 (32 bit gcc: 5.4.0) - Cinnamon 3.4.6 (Gtk 3.18.9-1ubuntu3.3)
System: CLEVO (portable)
CPU : Dual core Intel Core i5-3230M
Card : Intel 3rd Gen Core processor Graphics Controller
Hors ligne
#5 Le 27/06/2006, à 18:08
- Michel38
Re : Installer un hub USB .... ?
Un peu plus d'info sur ce qui doit être mon Belkin :
*-usb:4
description: USB Controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 10.4
bus info: pci@00:10.4
version: 86
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd
resources: iomemory:dfffbe00-dfffbeff irq:177
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.15-25-k7 ehci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 2.06
capabilities: usb-2.00
configuration: driver=hub maxpower=0mA slots=8 speed=480.0MB/s
C'est le seul qui en usb2 .....
LM18.3 - Kernel: 4.4.0-53-generic i686 (32 bit gcc: 5.4.0) - Cinnamon 3.4.6 (Gtk 3.18.9-1ubuntu3.3)
System: CLEVO (portable)
CPU : Dual core Intel Core i5-3230M
Card : Intel 3rd Gen Core processor Graphics Controller
Hors ligne
#6 Le 27/06/2006, à 20:33
- Michel38
Re : Installer un hub USB .... ?
Encore des infos .... utiles ?
michel@ubuntu:~$ cat /proc/bus/usb/devices
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-25-k7 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:10.4
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-25-k7 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:10.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-25-k7 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-25-k7 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-25-k7 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
michel@ubuntu:~$
LM18.3 - Kernel: 4.4.0-53-generic i686 (32 bit gcc: 5.4.0) - Cinnamon 3.4.6 (Gtk 3.18.9-1ubuntu3.3)
System: CLEVO (portable)
CPU : Dual core Intel Core i5-3230M
Card : Intel 3rd Gen Core processor Graphics Controller
Hors ligne
#7 Le 27/06/2006, à 21:36
- tylhdar
Re : Installer un hub USB .... ?
ben il est trés bien reconnu ton hub
un matériel non compatible linux est un matériel défectueux
ubuntu 10.4 sur pc1 ; debian squeeze sur pc2
Hors ligne
#8 Le 28/06/2006, à 18:04
- Michel38
Re : Installer un hub USB .... ?
ben il est trés bien reconnu ton hub
Bonsoir,
Comment se fait-il que lorsque je raccorde soit une carte flash, soit un memory stick .... rien ne se passe ? Normalement les voyants verts doivent s'allumer pour confirmer ..... J'avais aucun pbl sous Breezy.
LM18.3 - Kernel: 4.4.0-53-generic i686 (32 bit gcc: 5.4.0) - Cinnamon 3.4.6 (Gtk 3.18.9-1ubuntu3.3)
System: CLEVO (portable)
CPU : Dual core Intel Core i5-3230M
Card : Intel 3rd Gen Core processor Graphics Controller
Hors ligne
#9 Le 28/06/2006, à 18:27
- Michel38
Re : Installer un hub USB .... ?
Voici ce que me donne hardinfo
Pq ce mélange de UHCI et de EHCI ? ... c'est peut-être à cause de çà ?
Merci pour les conseils
LM18.3 - Kernel: 4.4.0-53-generic i686 (32 bit gcc: 5.4.0) - Cinnamon 3.4.6 (Gtk 3.18.9-1ubuntu3.3)
System: CLEVO (portable)
CPU : Dual core Intel Core i5-3230M
Card : Intel 3rd Gen Core processor Graphics Controller
Hors ligne
#10 Le 28/06/2006, à 18:28
- tylhdar
Re : Installer un hub USB .... ?
lesquel de voyant vert ceux du hub ?
recorde tes lecteurs de cartes directement voir s'il fonctionnent
Dernière modification par tylhdar (Le 28/06/2006, à 18:29)
un matériel non compatible linux est un matériel défectueux
ubuntu 10.4 sur pc1 ; debian squeeze sur pc2
Hors ligne
#11 Le 28/06/2006, à 18:37
- Michel38
Re : Installer un hub USB .... ?
lesquel de voyant vert ceux du hub ?
recorde tes lecteurs de cartes directement voir s'il fonctionnent
Oui ceux du hub ...... et le lecteur foncionne sur un port USB du PC
LM18.3 - Kernel: 4.4.0-53-generic i686 (32 bit gcc: 5.4.0) - Cinnamon 3.4.6 (Gtk 3.18.9-1ubuntu3.3)
System: CLEVO (portable)
CPU : Dual core Intel Core i5-3230M
Card : Intel 3rd Gen Core processor Graphics Controller
Hors ligne
#12 Le 28/06/2006, à 18:49
- tylhdar
Re : Installer un hub USB .... ?
t'es sur qu'il fonctionne, c'est bien la premiére fois qu'un hub ne fonctionne pas avec linux
un matériel non compatible linux est un matériel défectueux
ubuntu 10.4 sur pc1 ; debian squeeze sur pc2
Hors ligne
#13 Le 31/07/2006, à 15:24
- proutman
Re : Installer un hub USB .... ?
j'ai le même problème, je dois booter avec acpi=off pour utiliser un hub belkin 4 ports.
c'est bien un OS de pauvres :-)
Pages : 1